diff options
Diffstat (limited to 'drivers/staging/rt2860/rtmp.h')
| -rw-r--r-- | drivers/staging/rt2860/rtmp.h | 71 |
1 files changed, 36 insertions, 35 deletions
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index ca54e53b6603..70daaa4f9ac2 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -31,11 +31,12 @@ Miniport generic portion header file Revision History: - Who When What + Who When What -------- ---------- ---------------------------------------------- - Paul Lin 2002-08-01 created - James Tan 2002-09-06 modified (Revise NTCRegTable) - John Chang 2004-09-06 modified for RT2600 + Paul Lin 2002-08-01 created + James Tan 2002-09-06 modified (Revise NTCRegTable) + John Chang 2004-09-06 modified for RT2600 + Justin P. Mattock 11/07/2010 Fix some typos */ #ifndef __RTMP_H__ #define __RTMP_H__ @@ -337,7 +338,7 @@ struct rt_rtmp_sg_list { #define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) #define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE)) -/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */ +/* if original Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */ #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \ { \ if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) { \ @@ -466,7 +467,7 @@ struct rt_rtmp_dmabuf { /* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */ /* contiguous physical memory. char stored the binding Rx packet descriptor */ /* which won't be released, driver has to wait until upper layer return the packet */ -/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */ +/* before giving up this rx ring descriptor to ASIC. NDIS_BUFFER is associated pair */ /* to describe the packet buffer. For Tx, char stored the tx packet descriptor */ /* which driver should ACK upper layer when the tx is physically done or failed. */ /* */ @@ -602,7 +603,7 @@ struct rt_counter_ralink { }; struct rt_counter_drs { - /* to record the each TX rate's quality. 0 is best, the bigger the worse. */ + /* record each TX rate's quality. 0 is best, the bigger the worse. */ u16 TxQuality[MAX_STEP_OF_TX_RATE_SWITCH]; u8 PER[MAX_STEP_OF_TX_RATE_SWITCH]; u8 TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */ @@ -719,7 +720,7 @@ struct rt_fragment_frame { /* Packet information for NdisQueryPacket */ /* */ struct rt_packet_info { - u32 PhysicalBufferCount; /* Physical breaks of buffer descripor chained */ + u32 PhysicalBufferCount; /* Physical breaks of buffer descriptor chained */ u32 BufferCount; /* Number of Buffer descriptor chained */ u32 TotalPacketLength; /* Self explained */ char *pFirstBuffer; /* Pointer to first buffer descriptor */ @@ -846,8 +847,8 @@ typedef enum _ABGBAND_STATE_ { /* Power save method control */ typedef union _PS_CONTROL { struct { - unsigned long EnablePSinIdle:1; /* Enable radio off when not connect to AP. radio on only when sitesurvey, */ - unsigned long EnableNewPS:1; /* Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */ + unsigned long EnablePSinIdle:1; /* Enable radio off when not connected to AP. radio on only when sitesurvey, */ + unsigned long EnableNewPS:1; /* Enable new Chip power save function . New method can only be applied in chip version after 2872. and PCIe. */ unsigned long rt30xxPowerMode:2; /* Power Level Mode for rt30xx chip */ unsigned long rt30xxFollowHostASPM:1; /* Card Follows Host's setting for rt30xx chip. */ unsigned long rt30xxForceASPMTest:1; /* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */ @@ -1117,8 +1118,8 @@ struct rt_beacon_sync { unsigned long TimIELocationInBeacon[HW_BEACON_MAX_COUNT]; unsigned long CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT]; BOOLEAN EnableBeacon; /* trigger to enable beacon transmission. */ - u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ - u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ + u8 BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */ + u8 DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter needs to change. */ }; #endif /* RTMP_MAC_USB // */ @@ -1211,7 +1212,7 @@ struct rt_common_config { /*BOOLEAN bAutoTxRateSwitch; */ u8 MinTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */ u8 RtsRate; /* RATE_xxx */ - HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */ + HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operation at Ht rate. */ u8 MlmeRate; /* RATE_xxx, used to send MLME frames */ u8 BasicMlmeRate; /* Default Rate for sending MLME frames */ @@ -1264,7 +1265,7 @@ struct rt_common_config { struct rt_ht_capability_ie HtCapability; struct rt_add_ht_info_ie AddHTInfo; /* Useful as AP. */ /*This IE is used with channel switch announcement element when changing to a new 40MHz. */ - /*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */ + /*This IE is included in channel switch announcement frames 7.4.1.5, beacons, probe Rsp. */ struct rt_new_ext_chan_ie NewExtChanOffset; /*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */ BOOLEAN bHTProtect; @@ -1329,7 +1330,7 @@ struct rt_sta_admin_config { /* GROUP 1 - */ /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */ /* the user intended configuration, but not necessary fully equal to the final */ - /* settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */ + /* settings in ACTIVE BSS after negotiation/compromise with the BSS holder (either */ /* AP or IBSS holder). */ /* Once initialized, user configuration can only be changed via OID_xxx */ u8 BssType; /* BSS_INFRA or BSS_ADHOC */ @@ -1386,12 +1387,12 @@ struct rt_sta_admin_config { /* For WPA countermeasures */ unsigned long LastMicErrorTime; /* record last MIC error time */ - unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassoiciation). */ + unsigned long MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassociation). */ BOOLEAN bBlockAssoc; /* Block associate attempt for 60 seconds after counter measure occurred. */ /* For WPA-PSK supplicant state */ WPA_STATE WpaState; /* Default is SS_NOTUSE and handled by microsoft 802.1x */ u8 ReplayCounter[8]; - u8 ANonce[32]; /* ANonce for WPA-PSK from aurhenticator */ + u8 ANonce[32]; /* ANonce for WPA-PSK from auhenticator */ u8 SNonce[32]; /* SNonce for WPA-PSK */ u8 LastSNR0; /* last received BEACON's SNR */ @@ -1423,7 +1424,7 @@ struct rt_sta_admin_config { u8 RSNIE_Len; u8 RSN_IE[MAX_LEN_OF_RSNIE]; /* The content saved here should be little-endian format. */ - unsigned long CLBusyBytes; /* Save the total bytes received durning channel load scan time */ + unsigned long CLBusyBytes; /* Save the total bytes received during channel load scan time */ u16 RPIDensity[8]; /* Array for RPI density collection */ u8 RMReqCnt; /* Number of measurement request saved. */ @@ -1489,9 +1490,9 @@ struct rt_sta_admin_config { BOOLEAN bForceTxBurst; /* 1: force enble TX PACKET BURST, 0: disable */ }; -/* This data structure keep the current active BSS/IBSS's configuration that this STA */ +/* This data structure keeps the current active BSS/IBSS's configuration that this STA */ /* had agreed upon joining the network. Which means these parameters are usually decided */ -/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */ +/* by the BSS/IBSS creator instead of user configuration. Data in this data structure */ /* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */ /* Normally, after SCAN or failed roaming attempts, we need to recover back to */ /* the current active settings. */ @@ -1519,7 +1520,7 @@ struct rt_mac_table_entry { /*Choose 1 from ValidAsWDS and ValidAsCLI to validize. */ BOOLEAN ValidAsCLI; /* Sta mode, set this TRUE after Linkup,too. */ BOOLEAN ValidAsWDS; /* This is WDS Entry. only for AP mode. */ - BOOLEAN ValidAsApCli; /*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */ + BOOLEAN ValidAsApCli; /* This is a AP-Client entry, only for AP mode which enable AP-Client functions. */ BOOLEAN ValidAsMesh; BOOLEAN ValidAsDls; /* This is DLS Entry. only for STA mode. */ BOOLEAN isCached; @@ -1527,7 +1528,7 @@ struct rt_mac_table_entry { u8 EnqueueEapolStartTimerRunning; /* Enqueue EAPoL-Start for triggering EAP SM */ /*jan for wpa */ - /* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */ + /* record which entry revoke MIC Failure, if it leaves the BSS itself, AP won't update aMICFailTime MIB */ u8 CMTimerRunning; u8 apidx; /* MBSS number */ u8 RSNIE_Len; @@ -1722,7 +1723,7 @@ struct rt_rtmp_adapter { unsigned long Rt3xxRalinkLinkCtrl; /* USed for 3090F chip */ u16 DeviceID; /* Read from PCI config */ unsigned long AccessBBPFailCount; - BOOLEAN bPCIclkOff; /* flag that indicate if the PICE power status in Configuration SPace.. */ + BOOLEAN bPCIclkOff; /* flag that indicates if the PICE power status in Configuration Space.. */ BOOLEAN bPCIclkOffDisableTx; /* */ BOOLEAN brt30xxBanMcuCmd; /*when = 0xff means all commands are ok to set . */ @@ -1871,9 +1872,9 @@ struct rt_rtmp_adapter { /* ---------------------------- */ u8 RfIcType; /* RFIC_xxx */ unsigned long RfFreqOffset; /* Frequency offset for channel switching */ - struct rt_rtmp_rf_regs LatchRfRegs; /* latch th latest RF programming value since RF IC doesn't support READ */ + struct rt_rtmp_rf_regs LatchRfRegs; /* latch the latest RF programming value since RF IC doesn't support READ */ - EEPROM_ANTENNA_STRUC Antenna; /* Since ANtenna definition is different for a & g. We need to save it for future reference. */ + EEPROM_ANTENNA_STRUC Antenna; /* Since Antenna definition is different for a & g. We need to save it for future reference. */ EEPROM_NIC_CONFIG2_STRUC NicConfig2; /* This soft Rx Antenna Diversity mechanism is used only when user set */ @@ -1990,7 +1991,7 @@ struct rt_rtmp_adapter { struct rt_common_config CommonCfg; struct rt_mlme Mlme; - /* AP needs those vaiables for site survey feature. */ + /* AP needs those variables for site survey feature. */ struct rt_mlme_aux MlmeAux; /* temporary settings used during MLME state machine */ struct rt_bss_table ScanTab; /* store the latest SCAN result */ @@ -2012,7 +2013,7 @@ struct rt_rtmp_adapter { /* various Counters */ struct rt_counter_802_3 Counters8023; /* 802.3 counters */ struct rt_counter_802_11 WlanCounters; /* 802.11 MIB counters */ - struct rt_counter_ralink RalinkCounters; /* Ralink propriety counters */ + struct rt_counter_ralink RalinkCounters; /* Ralink proprietary counters */ struct rt_counter_drs DrsCounters; /* counters for Dynamic TX Rate Switching */ struct rt_private PrivateInfo; /* Private information & counters */ @@ -2024,7 +2025,7 @@ struct rt_rtmp_adapter { u16 Sequence; /* Control disconnect / connect event generation */ - /*+++Didn't used anymore */ + /*+++Not used anymore */ unsigned long LinkDownTime; /*--- */ unsigned long LastRxRate; @@ -2036,7 +2037,7 @@ struct rt_rtmp_adapter { unsigned long ExtraInfo; /* Extra information for displaying status */ unsigned long SystemErrorBitmap; /* b0: E2PROM version error */ - /*+++Didn't used anymore */ + /*+++Not used anymore */ unsigned long MacIcVersion; /* MAC/BBP serial interface issue solved after ver.D */ /*--- */ @@ -2089,7 +2090,7 @@ struct rt_rtmp_adapter { unsigned long BulkOutReq; unsigned long BulkOutComplete; unsigned long BulkOutCompleteOther; - unsigned long BulkOutCompleteCancel; /* seems not use now? */ + unsigned long BulkOutCompleteCancel; /* seems not used now? */ unsigned long BulkInReq; unsigned long BulkInComplete; unsigned long BulkInCompleteFail; @@ -2196,9 +2197,9 @@ struct rt_rx_blk { struct rt_tx_blk { u8 QueIdx; u8 TxFrameType; /* Indicate the Transmission type of the all frames in one batch */ - u8 TotalFrameNum; /* Total frame number want to send-out in one batch */ + u8 TotalFrameNum; /* Total frame number that wants to send-out in one batch */ u16 TotalFragNum; /* Total frame fragments required in one batch */ - u16 TotalFrameLen; /* Total length of all frames want to send-out in one batch */ + u16 TotalFrameLen; /* Total length of all frames that wants to send-out in one batch */ struct rt_queue_header TxPacketList; struct rt_mac_table_entry *pMacEntry; /* NULL: packet with 802.11 RA field is multicast/broadcast address */ @@ -2207,7 +2208,7 @@ struct rt_tx_blk { /* Following structure used for the characteristics of a specific packet. */ void *pPacket; u8 *pSrcBufHeader; /* Reference to the head of sk_buff->data */ - u8 *pSrcBufData; /* Reference to the sk_buff->data, will changed depends on hanlding progresss */ + u8 *pSrcBufData; /* Reference to the sk_buff->data, will change depending on the handling progresss */ u32 SrcBufLen; /* Length of packet payload which not including Layer 2 header */ u8 *pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */ u8 HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */ @@ -2219,7 +2220,7 @@ struct rt_tx_blk { u8 apidx; /* The interface associated to this packet */ u8 Wcid; /* The MAC entry associated to this packet */ u8 UserPriority; /* priority class of packet */ - u8 FrameGap; /* what kind of IFS this packet use */ + u8 FrameGap; /* what kind of IFS does this packet use */ u8 MpduReqNum; /* number of fragments of this frame */ u8 TxRate; /* TODO: Obsoleted? Should change to MCS? */ u8 CipherAlg; /* cipher alogrithm */ @@ -2978,7 +2979,7 @@ void LinkDown(struct rt_rtmp_adapter *pAd, IN BOOLEAN IsReqFromAP); void IterateOnBssTab(struct rt_rtmp_adapter *pAd); -void IterateOnBssTab2(struct rt_rtmp_adapter *pAd);; +void IterateOnBssTab2(struct rt_rtmp_adapter *pAd); void JoinParmFill(struct rt_rtmp_adapter *pAd, struct rt_mlme_join_req *JoinReq, unsigned long BssIdx); |