diff options
Diffstat (limited to 'drivers/staging/rt2860/sta_ioctl.c')
| -rw-r--r-- | drivers/staging/rt2860/sta_ioctl.c | 1236 |
1 files changed, 577 insertions, 659 deletions
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c index c5452f152a21..eb0109ad2fc0 100644 --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -49,10 +49,6 @@ extern ULONG RTDebugLevel; #define GROUP_KEY_NO 4 -#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E) iwe_stream_add_event(_A, _B, _C, _D, _E) -#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E) iwe_stream_add_point(_A, _B, _C, _D, _E) -#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F) iwe_stream_add_value(_A, _B, _C, _D, _E, _F) - extern UCHAR CipherWpa2Template[]; extern UCHAR CipherWpaPskTkip[]; extern UCHAR CipherWpaPskTkipLen; @@ -89,12 +85,12 @@ struct iw_priv_args privtab[] = { 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" }, { RAIO_ON, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" }, -#ifdef QOS_DLS_SUPPORT - { SHOW_DLS_ENTRY_INFO, - 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "dlsentryinfo" }, -#endif // QOS_DLS_SUPPORT // { SHOW_CFG_VALUE, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" }, +#if !defined(RT2860) && !defined(RT30xx) + { SHOW_ADHOC_ENTRY_INFO, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" }, +#endif /* --- sub-ioctls relations --- */ #ifdef DBG @@ -104,6 +100,11 @@ struct iw_priv_args privtab[] = { { RTPRIV_IOCTL_MAC, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024, "mac"}, +#ifdef RT30xx +{ RTPRIV_IOCTL_RF, + IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, + "rf"}, +#endif // RT30xx // { RTPRIV_IOCTL_E2P, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024, "e2p"}, @@ -168,16 +169,16 @@ INT Set_PSMode_Proc( IN PRTMP_ADAPTER pAdapter, IN PUCHAR arg); -#ifdef WPA_SUPPLICANT_SUPPORT INT Set_Wpa_Support( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); -#endif // WPA_SUPPLICANT_SUPPORT // #ifdef DBG +#if !defined(RT2860) && !defined(RT30xx) VOID RTMPIoctlBBP( IN PRTMP_ADAPTER pAdapter, IN struct iwreq *wrq); +#endif VOID RTMPIoctlMAC( IN PRTMP_ADAPTER pAdapter, @@ -186,6 +187,12 @@ VOID RTMPIoctlMAC( VOID RTMPIoctlE2PROM( IN PRTMP_ADAPTER pAdapter, IN struct iwreq *wrq); + +#ifdef RT30xx +VOID RTMPIoctlRF( + IN PRTMP_ADAPTER pAdapter, + IN struct iwreq *wrq); +#endif // RT30xx // #endif // DBG // @@ -197,11 +204,9 @@ INT Set_FragTest_Proc( IN PRTMP_ADAPTER pAdapter, IN PUCHAR arg); -#ifdef DOT11_N_SUPPORT INT Set_TGnWifiTest_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); -#endif // DOT11_N_SUPPORT // INT Set_LongRetryLimit_Proc( IN PRTMP_ADAPTER pAdapter, @@ -211,17 +216,11 @@ INT Set_ShortRetryLimit_Proc( IN PRTMP_ADAPTER pAdapter, IN PUCHAR arg); -#ifdef EXT_BUILD_CHANNEL_LIST -INT Set_Ieee80211dClientMode_Proc( - IN PRTMP_ADAPTER pAdapter, - IN PUCHAR arg); -#endif // EXT_BUILD_CHANNEL_LIST // - -#ifdef CARRIER_DETECTION_SUPPORT -INT Set_CarrierDetect_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); -#endif // CARRIER_DETECTION_SUPPORT // +#if !defined(RT2860) && !defined(RT30xx) +INT Show_Adhoc_MacTable_Proc( + IN PRTMP_ADAPTER pAd, + IN PCHAR extra); +#endif static struct { CHAR *name; @@ -239,7 +238,6 @@ static struct { {"BGProtection", Set_BGProtection_Proc}, {"RTSThreshold", Set_RTSThreshold_Proc}, {"FragThreshold", Set_FragThreshold_Proc}, -#ifdef DOT11_N_SUPPORT {"HtBw", Set_HtBw_Proc}, {"HtMcs", Set_HtMcs_Proc}, {"HtGi", Set_HtGi_Proc}, @@ -253,8 +251,6 @@ static struct { {"HtBaDecline", Set_BADecline_Proc}, {"HtProtect", Set_HtProtect_Proc}, {"HtMimoPs", Set_HtMimoPs_Proc}, -#endif // DOT11_N_SUPPORT // - #ifdef AGGREGATION_SUPPORT {"PktAggregate", Set_PktAggregate_Proc}, #endif @@ -277,68 +273,19 @@ static struct { #ifdef DBG {"Debug", Set_Debug_Proc}, #endif - -#ifdef RALINK_ATE - {"ATE", Set_ATE_Proc}, - {"ATEDA", Set_ATE_DA_Proc}, - {"ATESA", Set_ATE_SA_Proc}, - {"ATEBSSID", Set_ATE_BSSID_Proc}, - {"ATECHANNEL", Set_ATE_CHANNEL_Proc}, - {"ATETXPOW0", Set_ATE_TX_POWER0_Proc}, - {"ATETXPOW1", Set_ATE_TX_POWER1_Proc}, - {"ATETXANT", Set_ATE_TX_Antenna_Proc}, - {"ATERXANT", Set_ATE_RX_Antenna_Proc}, - {"ATETXFREQOFFSET", Set_ATE_TX_FREQOFFSET_Proc}, - {"ATETXBW", Set_ATE_TX_BW_Proc}, - {"ATETXLEN", Set_ATE_TX_LENGTH_Proc}, - {"ATETXCNT", Set_ATE_TX_COUNT_Proc}, - {"ATETXMCS", Set_ATE_TX_MCS_Proc}, - {"ATETXMODE", Set_ATE_TX_MODE_Proc}, - {"ATETXGI", Set_ATE_TX_GI_Proc}, - {"ATERXFER", Set_ATE_RX_FER_Proc}, - {"ATERRF", Set_ATE_Read_RF_Proc}, - {"ATEWRF1", Set_ATE_Write_RF1_Proc}, - {"ATEWRF2", Set_ATE_Write_RF2_Proc}, - {"ATEWRF3", Set_ATE_Write_RF3_Proc}, - {"ATEWRF4", Set_ATE_Write_RF4_Proc}, - {"ATELDE2P", Set_ATE_Load_E2P_Proc}, - {"ATERE2P", Set_ATE_Read_E2P_Proc}, - {"ATESHOW", Set_ATE_Show_Proc}, - {"ATEHELP", Set_ATE_Help_Proc}, - -#ifdef RALINK_28xx_QA - {"TxStop", Set_TxStop_Proc}, - {"RxStop", Set_RxStop_Proc}, -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - -#ifdef WPA_SUPPLICANT_SUPPORT {"WpaSupport", Set_Wpa_Support}, -#endif // WPA_SUPPLICANT_SUPPORT // - - - {"FixedTxMode", Set_FixedTxMode_Proc}, -#ifdef CONFIG_APSTA_MIXED_SUPPORT - {"OpMode", Set_OpMode_Proc}, -#endif // CONFIG_APSTA_MIXED_SUPPORT // -#ifdef DOT11_N_SUPPORT {"TGnWifiTest", Set_TGnWifiTest_Proc}, {"ForceGF", Set_ForceGF_Proc}, -#endif // DOT11_N_SUPPORT // -#ifdef QOS_DLS_SUPPORT - {"DlsAddEntry", Set_DlsAddEntry_Proc}, - {"DlsTearDownEntry", Set_DlsTearDownEntry_Proc}, -#endif // QOS_DLS_SUPPORT // {"LongRetry", Set_LongRetryLimit_Proc}, {"ShortRetry", Set_ShortRetryLimit_Proc}, -#ifdef EXT_BUILD_CHANNEL_LIST - {"11dClientMode", Set_Ieee80211dClientMode_Proc}, -#endif // EXT_BUILD_CHANNEL_LIST // -#ifdef CARRIER_DETECTION_SUPPORT - {"CarrierDetect", Set_CarrierDetect_Proc}, -#endif // CARRIER_DETECTION_SUPPORT // - +//2008/09/11:KH add to support efuse<-- +#ifdef RT30xx + {"efuseFreeNumber", set_eFuseGetFreeBlockCount_Proc}, + {"efuseDump", set_eFusedump_Proc}, + {"efuseLoadFromBin", set_eFuseLoadFromBin_Proc}, +#endif // RT30xx // +//2008/09/11:KH add to support efuse--> {NULL,} }; @@ -352,6 +299,7 @@ VOID RTMPAddKey( DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n")); +#ifdef RT2860 RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) { @@ -365,6 +313,7 @@ VOID RTMPAddKey( RTMPusecDelay(6000); pAd->bPCIclkOff = FALSE; } +#endif if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) { @@ -380,14 +329,13 @@ VOID RTMPAddKey( NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY)); pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK; NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK); -#ifdef WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) { NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); } else -#endif // WPA_SUPPLICANT_SUPPORT // { NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); @@ -440,14 +388,13 @@ VOID RTMPAddKey( NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY)); pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK; NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK); -#ifdef WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled) { NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); } else -#endif // WPA_SUPPLICANT_SUPPORT // { NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); @@ -559,8 +506,10 @@ VOID RTMPAddKey( } } end: +#ifdef RT2860 RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); DBGPRINT(RT_DEBUG_INFO, ("<------ RTMPAddKey\n")); +#endif return; } @@ -582,8 +531,12 @@ rt_ioctl_giwname(struct net_device *dev, char *name, char *extra) { // PRTMP_ADAPTER pAdapter = dev->ml_priv; - +#ifdef RT2860 strncpy(name, "RT2860 Wireless", IFNAMSIZ); +#endif +#ifdef RT2870 + strncpy(name, "RT2870 Wireless", IFNAMSIZ); +#endif // RT2870 // return 0; } @@ -625,7 +578,12 @@ int rt_ioctl_giwfreq(struct net_device *dev, struct iw_freq *freq, char *extra) { VIRTUAL_ADAPTER *pVirtualAd = NULL; +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter; +#endif UCHAR ch; ULONG m; @@ -636,7 +594,9 @@ int rt_ioctl_giwfreq(struct net_device *dev, else { pVirtualAd = dev->ml_priv; +#ifndef RT30xx if (pVirtualAd && pVirtualAd->RtmpDev) +#endif pAdapter = pVirtualAd->RtmpDev->ml_priv; } @@ -696,6 +656,7 @@ int rt_ioctl_giwmode(struct net_device *dev, struct iw_request_info *info, __u32 *mode, char *extra) { +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; @@ -716,6 +677,10 @@ int rt_ioctl_giwmode(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif if (ADHOC_ON(pAdapter)) *mode = IW_MODE_ADHOC; @@ -759,12 +724,18 @@ int rt_ioctl_giwrange(struct net_device *dev, struct iw_request_info *info, struct iw_point *data, char *extra) { +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif struct iw_range *range = (struct iw_range *) extra; u16 val; int i; +#ifndef RT30xx if (dev->priv_flags == INT_MAIN) { pAdapter = dev->ml_priv; @@ -782,6 +753,7 @@ int rt_ioctl_giwrange(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n")); data->length = sizeof(struct iw_range); @@ -901,6 +873,7 @@ int rt_ioctl_giwap(struct net_device *dev, struct iw_request_info *info, struct sockaddr *ap_addr, char *extra) { +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; @@ -921,20 +894,22 @@ int rt_ioctl_giwap(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter)) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN); } -#ifdef WPA_SUPPLICANT_SUPPORT // Add for RT2870 else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN); } -#endif // WPA_SUPPLICANT_SUPPORT // else { DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n")); @@ -1041,7 +1016,7 @@ int rt_ioctl_siwscan(struct net_device *dev, DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n")); return -EINVAL; } - +#ifdef RT2860 if ((pAdapter->OpMode == OPMODE_STA) && (IDLE_ON(pAdapter)) && (pAdapter->StaCfg.bRadio == TRUE) && (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_IDLE_RADIO_OFF))) @@ -1051,13 +1026,11 @@ int rt_ioctl_siwscan(struct net_device *dev, // Check if still radio off. else if (pAdapter->bPCIclkOff == TRUE) return 0; - -#ifdef WPA_SUPPLICANT_SUPPORT +#endif if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) { pAdapter->StaCfg.WpaSupplicantScanCount++; } -#endif // WPA_SUPPLICANT_SUPPORT // pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE; if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) @@ -1065,7 +1038,6 @@ int rt_ioctl_siwscan(struct net_device *dev, do{ Now = jiffies; -#ifdef WPA_SUPPLICANT_SUPPORT if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) && (pAdapter->StaCfg.WpaSupplicantScanCount > 3)) { @@ -1073,7 +1045,6 @@ int rt_ioctl_siwscan(struct net_device *dev, Status = NDIS_STATUS_SUCCESS; break; } -#endif // WPA_SUPPLICANT_SUPPORT // if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) && ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || @@ -1133,13 +1104,10 @@ int rt_ioctl_giwscan(struct net_device *dev, return -EAGAIN; } - -#ifdef WPA_SUPPLICANT_SUPPORT if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) { pAdapter->StaCfg.WpaSupplicantScanCount = 0; } -#endif // WPA_SUPPLICANT_SUPPORT // if (pAdapter->ScanTab.BssNr == 0) { @@ -1175,7 +1143,88 @@ int rt_ioctl_giwscan(struct net_device *dev, memcpy(iwe.u.ap_addr.sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, ETH_ALEN); previous_ev = current_ev; - current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN); + current_ev = iwe_stream_add_event(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN); +#ifdef RT30xx + if (current_ev == previous_ev) +#if WIRELESS_EXT >= 17 + return -E2BIG; +#else + break; +#endif + + /* + Protocol: + it will show scanned AP's WirelessMode . + it might be + 802.11a + 802.11a/n + 802.11g/n + 802.11b/g/n + 802.11g + 802.11b/g + */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWNAME; + + + { + PBSS_ENTRY pBssEntry=&pAdapter->ScanTab.BssEntry[i]; + BOOLEAN isGonly=FALSE; + int rateCnt=0; + + if (pBssEntry->Channel>14) + { + if (pBssEntry->HtCapabilityLen!=0) + strcpy(iwe.u.name,"802.11a/n"); + else + strcpy(iwe.u.name,"802.11a"); + } + else + { + /* + if one of non B mode rate is set supported rate . it mean G only. + */ + for (rateCnt=0;rateCnt<pBssEntry->SupRateLen;rateCnt++) + { + /* + 6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate , it mean G only. + */ + if (pBssEntry->SupRate[rateCnt]==140 || pBssEntry->SupRate[rateCnt]==146 || pBssEntry->SupRate[rateCnt]>=152) + isGonly=TRUE; + } + + for (rateCnt=0;rateCnt<pBssEntry->ExtRateLen;rateCnt++) + { + if (pBssEntry->ExtRate[rateCnt]==140 || pBssEntry->ExtRate[rateCnt]==146 || pBssEntry->ExtRate[rateCnt]>=152) + isGonly=TRUE; + } + + + if (pBssEntry->HtCapabilityLen!=0) + { + if (isGonly==TRUE) + strcpy(iwe.u.name,"802.11g/n"); + else + strcpy(iwe.u.name,"802.11b/g/n"); + } + else + { + if (isGonly==TRUE) + strcpy(iwe.u.name,"802.11g"); + else + { + if (pBssEntry->SupRateLen==4 && pBssEntry->ExtRateLen==0) + strcpy(iwe.u.name,"802.11b"); + else + strcpy(iwe.u.name,"802.11b/g"); + } + } + } + } + + previous_ev = current_ev; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); +#endif /* RT30xx */ if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1191,7 +1240,7 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.u.data.flags = 1; previous_ev = current_ev; - current_ev = IWE_STREAM_ADD_POINT(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid); + current_ev = iwe_stream_add_point(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1218,7 +1267,7 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.len = IW_EV_UINT_LEN; previous_ev = current_ev; - current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe, IW_EV_UINT_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_UINT_LEN); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1238,7 +1287,7 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.u.freq.i = 0; previous_ev = current_ev; - current_ev = IWE_STREAM_ADD_EVENT(info, current_ev,end_buf, &iwe, IW_EV_FREQ_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1253,7 +1302,7 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.u.qual.level = 0; iwe.u.qual.noise = 0; set_quality(pAdapter, &iwe.u.qual, pAdapter->ScanTab.BssEntry[i].Rssi); - current_ev = IWE_STREAM_ADD_EVENT(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1271,7 +1320,7 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.u.data.flags = IW_ENCODE_DISABLED; previous_ev = current_ev; - current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key); + current_ev = iwe_stream_add_point(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1299,7 +1348,7 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.u.bitrate.value = (tmpRate/2) * 1000000; iwe.u.bitrate.disabled = 0; - current_val = IWE_STREAM_ADD_VALUE(info, current_ev, + current_val = iwe_stream_add_value(info, current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); @@ -1323,7 +1372,7 @@ int rt_ioctl_giwscan(struct net_device *dev, pAdapter->ScanTab.BssEntry[i].WpaIE.IELen); iwe.cmd = IWEVGENIE; iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; - current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1341,7 +1390,7 @@ int rt_ioctl_giwscan(struct net_device *dev, pAdapter->ScanTab.BssEntry[i].RsnIE.IELen); iwe.cmd = IWEVGENIE; iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; - current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1360,9 +1409,9 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen * 2) + 7; NdisMoveMemory(custom, "wpa_ie=", 7); for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; idx++) - sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]); + sprintf(custom + strlen(custom), "%02x", pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]); previous_ev = current_ev; - current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, custom); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1380,9 +1429,9 @@ int rt_ioctl_giwscan(struct net_device *dev, iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen * 2) + 7; NdisMoveMemory(custom, "rsn_ie=", 7); for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; idx++) - sprintf(custom, "%s%02x", custom, pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]); + sprintf(custom + strlen(custom), "%02x", pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]); previous_ev = current_ev; - current_ev = IWE_STREAM_ADD_POINT(info, current_ev, end_buf, &iwe, custom); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, custom); if (current_ev == previous_ev) #if WIRELESS_EXT >= 17 return -E2BIG; @@ -1445,6 +1494,7 @@ int rt_ioctl_giwessid(struct net_device *dev, struct iw_request_info *info, struct iw_point *data, char *essid) { +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; @@ -1465,6 +1515,10 @@ int rt_ioctl_giwessid(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif data->flags = 1; if (MONITOR_ON(pAdapter)) @@ -1479,6 +1533,14 @@ int rt_ioctl_giwessid(struct net_device *dev, data->length = pAdapter->CommonCfg.SsidLen; memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen); } +#ifdef RT2870 + // Add for RT2870 + else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) + { + data->length = pAdapter->CommonCfg.SsidLen; + memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen); + } +#endif // RT2870 // else {//the ANY ssid was specified data->length = 0; @@ -1516,6 +1578,7 @@ int rt_ioctl_giwnickn(struct net_device *dev, struct iw_request_info *info, struct iw_point *data, char *nickname) { +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; @@ -1536,6 +1599,10 @@ int rt_ioctl_giwnickn(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif if (data->length > strlen(pAdapter->nickname) + 1) data->length = strlen(pAdapter->nickname) + 1; @@ -1579,6 +1646,7 @@ int rt_ioctl_giwrts(struct net_device *dev, struct iw_request_info *info, struct iw_param *rts, char *extra) { +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; @@ -1599,6 +1667,10 @@ int rt_ioctl_giwrts(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif //check if the interface is down if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) @@ -1645,6 +1717,7 @@ int rt_ioctl_giwfrag(struct net_device *dev, struct iw_request_info *info, struct iw_param *frag, char *extra) { +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; @@ -1665,6 +1738,10 @@ int rt_ioctl_giwfrag(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif //check if the interface is down if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) @@ -1705,8 +1782,13 @@ int rt_ioctl_siwencode(struct net_device *dev, pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen; goto done; } +#ifndef RT30xx else if ((erq->length == 0) && (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)) +#endif +#ifdef RT30xx + else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN) +#endif { STA_PORT_SECURED(pAdapter); pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled; @@ -1717,7 +1799,9 @@ int rt_ioctl_siwencode(struct net_device *dev, pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared; else pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen; +#ifndef RT30xx goto done; +#endif } if (erq->length > 0) @@ -1736,6 +1820,12 @@ int rt_ioctl_siwencode(struct net_device *dev, //Using default key keyIdx = pAdapter->StaCfg.DefaultKeyId; } +#ifdef RT30xx + else + { + pAdapter->StaCfg.DefaultKeyId=keyIdx; + } +#endif NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16); @@ -1787,7 +1877,11 @@ rt_ioctl_giwencode(struct net_device *dev, struct iw_request_info *info, struct iw_point *erq, char *key) { +#ifdef RT30xx + PRTMP_ADAPTER pAdapter = dev->ml_priv; +#endif int kid; +#ifndef RT30xx PRTMP_ADAPTER pAdapter = NULL; VIRTUAL_ADAPTER *pVirtualAd = NULL; @@ -1808,6 +1902,7 @@ rt_ioctl_giwencode(struct net_device *dev, So the net_dev->ml_priv will be NULL in 2rd open */ return -ENETDOWN; } +#endif //check if the interface is down if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) @@ -1952,14 +2047,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info, memset(extra, 0x00, IW_PRIV_SIZE_MASK); sprintf(extra, "\n\n"); -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->ate.TxDoneCount); - //sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->ate.TxDoneCount); - } - else -#endif // RALINK_ATE // { sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart); sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart); @@ -1975,31 +2062,12 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info, sprintf(extra+strlen(extra), "Rx duplicate frame = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart); sprintf(extra+strlen(extra), "False CCA (one second) = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt); -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - if (pAd->ate.RxAntennaSel == 0) - { - sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta)); - sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta)); - sprintf(extra+strlen(extra), "RSSI-C (if available) = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta)); - } - else - { - sprintf(extra+strlen(extra), "RSSI = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta)); - } - } - else -#endif // RALINK_ATE // { sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta)); sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta)); sprintf(extra+strlen(extra), "RSSI-C (if available) = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta)); } -#ifdef WPA_SUPPLICANT_SUPPORT sprintf(extra+strlen(extra), "WpaSupplicantUP = %d\n\n", pAd->StaCfg.WpaSupplicantUP); -#endif // WPA_SUPPLICANT_SUPPORT // - wrq->length = strlen(extra) + 1; // 1: size of '\0' DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length)); @@ -2007,7 +2075,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info, return Status; } -#ifdef DOT11_N_SUPPORT void getBaInfo( IN PRTMP_ADAPTER pAd, IN PUCHAR pOutBuf) @@ -2022,8 +2089,7 @@ void getBaInfo( if (((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC)) || (pEntry->ValidAsWDS) || (pEntry->ValidAsMesh)) { - sprintf(pOutBuf, "%s\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n", - pOutBuf, + sprintf(pOutBuf + strlen(pOutBuf), "\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n", pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2], pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5], pEntry->Aid); @@ -2033,7 +2099,7 @@ void getBaInfo( if (pEntry->BARecWcidArray[j] != 0) { pRecBAEntry =&pAd->BATable.BARecEntry[pEntry->BARecWcidArray[j]]; - sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", pOutBuf, j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen); + sprintf(pOutBuf + strlen(pOutBuf), "TID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen); } } sprintf(pOutBuf, "%s\n", pOutBuf); @@ -2044,7 +2110,7 @@ void getBaInfo( if (pEntry->BAOriWcidArray[j] != 0) { pOriBAEntry =&pAd->BATable.BAOriEntry[pEntry->BAOriWcidArray[j]]; - sprintf(pOutBuf, "%sTID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", pOutBuf, j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]); + sprintf(pOutBuf + strlen(pOutBuf), "TID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]); } } sprintf(pOutBuf, "%s\n\n", pOutBuf); @@ -2055,7 +2121,6 @@ void getBaInfo( return; } -#endif // DOT11_N_SUPPORT // static int rt_private_show(struct net_device *dev, struct iw_request_info *info, @@ -2101,12 +2166,10 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, case SHOW_CONN_STATUS: if (MONITOR_ON(pAd)) { -#ifdef DOT11_N_SUPPORT if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && pAd->CommonCfg.RegTransmitSetting.field.BW) sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel); else -#endif // DOT11_N_SUPPORT // sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel); } else @@ -2140,12 +2203,10 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ ); wrq->length = strlen(extra) + 1; // 1: size of '\0' break; -#ifdef DOT11_N_SUPPORT case SHOW_BA_INFO: getBaInfo(pAd, extra); wrq->length = strlen(extra) + 1; // 1: size of '\0' break; -#endif // DOT11_N_SUPPORT // case SHOW_DESC_INFO: { Show_DescInfo_Proc(pAd, NULL); @@ -2174,6 +2235,14 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, wrq->length = strlen(extra) + 1; // 1: size of '\0' break; case RAIO_ON: +#ifdef RT2870 + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) + { + sprintf(extra, "Scanning\n"); + wrq->length = strlen(extra) + 1; // 1: size of '\0' + break; + } +#endif pAd->StaCfg.bSwRadio = TRUE; //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio)) { @@ -2189,16 +2258,6 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, wrq->length = strlen(extra) + 1; // 1: size of '\0' break; - -#ifdef QOS_DLS_SUPPORT - case SHOW_DLS_ENTRY_INFO: - { - Set_DlsEntryInfo_Display_Proc(pAd, NULL); - wrq->length = 0; // 1: size of '\0' - } - break; -#endif // QOS_DLS_SUPPORT // - case SHOW_CFG_VALUE: { Status = RTMPShowCfgValue(pAd, wrq->pointer, extra); @@ -2206,6 +2265,12 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, wrq->length = strlen(extra) + 1; // 1: size of '\0' } break; +#if !defined(RT2860) && !defined(RT30xx) + case SHOW_ADHOC_ENTRY_INFO: + Show_Adhoc_MacTable_Proc(pAd, extra); + wrq->length = strlen(extra) + 1; // 1: size of '\0' + break; +#endif default: DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd)); break; @@ -2312,9 +2377,7 @@ int rt_ioctl_siwauth(struct net_device *dev, pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled; pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus; pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled; -#ifdef WPA_SUPPLICANT_SUPPORT pAdapter->StaCfg.IEEE8021X = FALSE; -#endif // WPA_SUPPLICANT_SUPPORT // } else if (param->value == IW_AUTH_CIPHER_TKIP) { @@ -2356,22 +2419,16 @@ int rt_ioctl_siwauth(struct net_device *dev, if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) { pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA; -#ifdef WPA_SUPPLICANT_SUPPORT pAdapter->StaCfg.IEEE8021X = FALSE; -#endif // WPA_SUPPLICANT_SUPPORT // } else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) { pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2; -#ifdef WPA_SUPPLICANT_SUPPORT pAdapter->StaCfg.IEEE8021X = FALSE; -#endif // WPA_SUPPLICANT_SUPPORT // } -#ifdef WPA_SUPPLICANT_SUPPORT else // WEP 1x pAdapter->StaCfg.IEEE8021X = TRUE; -#endif // WPA_SUPPLICANT_SUPPORT // } else if (param->value == 0) { @@ -2457,6 +2514,7 @@ void fnSetCipherKey( IN BOOLEAN bGTK, IN struct iw_encode_ext *ext) { +#ifdef RT2860 RTMP_CLEAR_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); if (RTMP_TEST_PSFLAG(pAdapter, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) { @@ -2470,7 +2528,7 @@ void fnSetCipherKey( RTMPusecDelay(6000); pAdapter->bPCIclkOff = FALSE; } - +#endif NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY)); pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK; NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK); @@ -2501,8 +2559,9 @@ void fnSetCipherKey( keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, &pAdapter->MacTab.Content[BSSID_WCID]); - +#ifdef RT2860 RTMP_SET_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); +#endif } int rt_ioctl_siwencodeext(struct net_device *dev, @@ -2567,7 +2626,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16); NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len); - +#ifndef RT30xx if (pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled || pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) { @@ -2582,6 +2641,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, // Indicate Connected for GUI pAdapter->IndicateMediaState = NdisMediaStateConnected; } +#endif break; case IW_ENCODE_ALG_TKIP: DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len)); @@ -2752,7 +2812,6 @@ int rt_ioctl_giwgenie(struct net_device *dev, return 0; } -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT #ifdef SIOCSIWGENIE if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) { @@ -2764,7 +2823,6 @@ int rt_ioctl_giwgenie(struct net_device *dev, } else #endif // SIOCSIWGENIE // -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // { UCHAR RSNIe = IE_WPA; @@ -2895,15 +2953,13 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info, DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value)); if (sscanf(this_char, "%d", &(bbpId)) == 1) { +#ifndef RT30xx if (bbpId <= 136) +#endif // RT30xx // +#ifdef RT30xx + if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control +#endif // RT30xx // { -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - else -#endif // RALINK_ATE // { RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); } @@ -2927,17 +2983,13 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info, { //Write if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1)) { +#ifndef RT30xx if (bbpId <= 136) +#endif // RT30xx // +#ifdef RT30xx + if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control +#endif // RT30xx // { -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue); - //Read it back for showing - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - else -#endif // RALINK_ATE // { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue); //Read it back for showing @@ -2968,21 +3020,24 @@ next: { memset(extra, 0x00, IW_PRIV_SIZE_MASK); sprintf(extra, "\n"); +#ifndef RT30xx for (bbpId = 0; bbpId <= 136; bbpId++) +#endif // RT30xx // +#ifdef RT30xx + for (bbpId = 0; bbpId <= 138; bbpId++) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control +#endif // RT30xx // { if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10)) break; -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - else -#endif // RALINK_ATE // RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); +#ifndef RT30xx sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X ", bbpId, bbpId*2, regBBP); if (bbpId%5 == 4) sprintf(extra+strlen(extra), "\n"); +#endif +#ifdef RT30xx + sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP); // edit by johnli, change display format +#endif } wrq->length = strlen(extra) + 1; // 1: size of '\0' @@ -3022,9 +3077,7 @@ int rt_ioctl_siwrate(struct net_device *dev, (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM)) RTMPSetDesiredRates(pAd, -1); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // } else { @@ -3037,9 +3090,7 @@ int rt_ioctl_siwrate(struct net_device *dev, else { pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // } DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS)); } @@ -3087,13 +3138,11 @@ int rt_ioctl_giwrate(struct net_device *dev, else ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word; -#ifdef DOT11_N_SUPPORT if (ht_setting.field.MODE >= MODE_HTMIX) { rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS); } else -#endif // DOT11_N_SUPPORT // if (ht_setting.field.MODE == MODE_OFDM) rate_index = (UCHAR)(ht_setting.field.MCS) + 4; else if (ht_setting.field.MODE == MODE_CCK) @@ -3184,11 +3233,7 @@ static const iw_handler rt_handler[] = static const iw_handler rt_priv_handlers[] = { (iw_handler) NULL, /* + 0x00 */ (iw_handler) NULL, /* + 0x01 */ -#ifndef CONFIG_AP_SUPPORT (iw_handler) rt_ioctl_setparam, /* + 0x02 */ -#else - (iw_handler) NULL, /* + 0x02 */ -#endif // CONFIG_AP_SUPPORT // #ifdef DBG (iw_handler) rt_private_ioctl_bbp, /* + 0x03 */ #else @@ -3258,27 +3303,13 @@ INT RTMPSetInformation( ULONG PowerTemp; BOOLEAN RadioState; BOOLEAN StateMachineTouched = FALSE; -#ifdef DOT11_N_SUPPORT OID_SET_HT_PHYMODE HT_PhyMode; //11n ,kathy -#endif // DOT11_N_SUPPORT // -#ifdef WPA_SUPPLICANT_SUPPORT PNDIS_802_11_PMKID pPmkId = NULL; BOOLEAN IEEE8021xState = FALSE; BOOLEAN IEEE8021x_required_keys = FALSE; UCHAR wpa_supplicant_enable = 0; -#endif // WPA_SUPPLICANT_SUPPORT // - -#ifdef SNMP_SUPPORT - TX_RTY_CFG_STRUC tx_rty_cfg; - ULONG ShortRetryLimit, LongRetryLimit; - UCHAR ctmp; -#endif // SNMP_SUPPORT // - -#ifdef DOT11_N_SUPPORT MaxPhyMode = PHY_11N_5G; -#endif // DOT11_N_SUPPORT // - DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(), 0x%08x\n", cmd&0x7FFF)); switch(cmd & 0x7FFF) { @@ -3298,21 +3329,12 @@ INT RTMPSetInformation( pAdapter->CommonCfg.PhyMode = 0xff; // Build all corresponding channel information RTMPSetPhyMode(pAdapter, TmpPhy); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAdapter); -#endif // DOT11_N_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand, pAdapter->CommonCfg.CountryRegion)); } break; case OID_802_11_BSSID_LIST_SCAN: - #ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // Now = jiffies; DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount)); @@ -3414,13 +3436,6 @@ INT RTMPSetInformation( } break; case OID_802_11_BSSID: -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS)) Status = -EINVAL; else @@ -3492,9 +3507,7 @@ INT RTMPSetInformation( if (PhyMode <= MaxPhyMode) { RTMPSetPhyMode(pAdapter, PhyMode); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAdapter); -#endif // DOT11_N_SUPPORT // } DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode)); } @@ -3513,9 +3526,14 @@ INT RTMPSetInformation( { // allow dynamic change of "USE OFDM rate or not" in ADHOC mode // if setting changed, need to reset current TX rate as well as BEACON frame format +#ifdef RT30xx + pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode; +#endif if (pAdapter->StaCfg.BssType == BSS_ADHOC) { +#ifndef RT30xx pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode; +#endif RTMPSetPhyMode(pAdapter, PhyMode); MlmeUpdateTxRates(pAdapter, FALSE, 0); MakeIbssBeacon(pAdapter); // re-build BEACON frame @@ -3679,6 +3697,15 @@ INT RTMPSetInformation( pAdapter->Counters8023.RxNoBuffer = 0; pAdapter->Counters8023.GoodReceives = 0; pAdapter->Counters8023.RxNoBuffer = 0; +#ifdef RT2870 + pAdapter->BulkOutComplete = 0; + pAdapter->BulkOutCompleteOther= 0; + pAdapter->BulkOutCompleteCancel = 0; + pAdapter->BulkOutReq = 0; + pAdapter->BulkInReq= 0; + pAdapter->BulkInComplete = 0; + pAdapter->BulkInCompleteFail = 0; +#endif // RT2870 // DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n")); break; case OID_802_11_RTS_THRESHOLD: @@ -3763,10 +3790,10 @@ INT RTMPSetInformation( RTMPSetPhyMode(pAdapter, PHY_11A); else Status = -EINVAL; -#ifdef DOT11_N_SUPPORT + if (Status == NDIS_STATUS_SUCCESS) SetCommonHT(pAdapter); -#endif // DOT11_N_SUPPORT // + DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType)); } break; @@ -3910,7 +3937,6 @@ INT RTMPSetInformation( pAdapter->bConfigChanged = TRUE; } break; -#ifdef DOT11_N_SUPPORT case RT_OID_802_11_SET_HT_PHYMODE: if (wrq->u.data.length != sizeof(OID_SET_HT_PHYMODE)) Status = -EINVAL; @@ -3929,7 +3955,6 @@ INT RTMPSetInformation( pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI, pAdapter->StaCfg.HTPhyMode.field.STBC)); break; -#endif // DOT11_N_SUPPORT // case RT_OID_802_11_SET_APSD_SETTING: if (wrq->u.data.length != sizeof(ULONG)) Status = -EINVAL; @@ -3970,62 +3995,7 @@ INT RTMPSetInformation( DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave)); } break; -#ifdef QOS_DLS_SUPPORT - case RT_OID_802_11_SET_DLS: - if (wrq->u.data.length != sizeof(ULONG)) - Status = -EINVAL; - else - { - BOOLEAN oldvalue = pAdapter->CommonCfg.bDLSCapable; - Status = copy_from_user(&pAdapter->CommonCfg.bDLSCapable, wrq->u.data.pointer, wrq->u.data.length); - if (oldvalue && !pAdapter->CommonCfg.bDLSCapable) - { - int i; - // tear down local dls table entry - for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++) - { - if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH)) - { - pAdapter->StaCfg.DLSEntry[i].Status = DLS_NONE; - pAdapter->StaCfg.DLSEntry[i].Valid = FALSE; - RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr); - } - } - // tear down peer dls table entry - for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++) - { - if (pAdapter->StaCfg.DLSEntry[i].Valid && (pAdapter->StaCfg.DLSEntry[i].Status == DLS_FINISH)) - { - pAdapter->StaCfg.DLSEntry[i].Status = DLS_NONE; - pAdapter->StaCfg.DLSEntry[i].Valid = FALSE; - RTMPSendDLSTearDownFrame(pAdapter, pAdapter->StaCfg.DLSEntry[i].MacAddr); - } - } - } - - DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS (=%d)\n", pAdapter->CommonCfg.bDLSCapable)); - } - break; - - case RT_OID_802_11_SET_DLS_PARAM: - if (wrq->u.data.length != sizeof(RT_802_11_DLS_UI)) - Status = -EINVAL; - else - { - RT_802_11_DLS Dls; - - NdisZeroMemory(&Dls, sizeof(RT_802_11_DLS)); - RTMPMoveMemory(&Dls, wrq->u.data.pointer, sizeof(RT_802_11_DLS_UI)); - MlmeEnqueue(pAdapter, - MLME_CNTL_STATE_MACHINE, - RT_OID_802_11_SET_DLS_PARAM, - sizeof(RT_802_11_DLS), - &Dls); - DBGPRINT(RT_DEBUG_TRACE,("Set::RT_OID_802_11_SET_DLS_PARAM \n")); - } - break; -#endif // QOS_DLS_SUPPORT // case RT_OID_802_11_SET_WMM: if (wrq->u.data.length != sizeof(BOOLEAN)) Status = -EINVAL; @@ -4037,13 +4007,6 @@ INT RTMPSetInformation( break; case OID_802_11_DISASSOCIATE: -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // // // Set NdisRadioStateOff to TRUE, instead of called MlmeRadioOff. // Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be 0 @@ -4074,8 +4037,6 @@ INT RTMPSetInformation( StateMachineTouched = TRUE; } break; - -#ifdef DOT11_N_SUPPORT case RT_OID_802_11_SET_IMME_BA_CAP: if (wrq->u.data.length != sizeof(OID_BACAP_STRUC)) Status = -EINVAL; @@ -4230,8 +4191,6 @@ INT RTMPSetInformation( } } break; -#endif // DOT11_N_SUPPORT // - // For WPA_SUPPLICANT to set static wep key case OID_802_11_ADD_WEP: pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG); @@ -4285,19 +4244,21 @@ INT RTMPSetInformation( // Default key for tx (shared key) if (pWepKey->KeyIndex & 0x80000000) { -#ifdef WPA_SUPPLICANT_SUPPORT // set key material and key length NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16); pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength; NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength); pAdapter->StaCfg.DesireSharedKeyId = KeyIdx; pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg; -#endif // WPA_SUPPLICANT_SUPPORT // pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx; } - -#ifdef WPA_SUPPLICANT_SUPPORT +#ifndef RT30xx +#ifdef RT2860 if ((pAdapter->StaCfg.WpaSupplicantUP != 0) && +#endif +#ifdef RT2870 + if ((pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) && +#endif (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) { Key = pWepKey->KeyMaterial; @@ -4314,7 +4275,10 @@ INT RTMPSetInformation( pAdapter->IndicateMediaState = NdisMediaStateConnected; } else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) -#endif // WPA_SUPPLICANT_SUPPORT +#endif +#ifdef RT30xx + if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) +#endif { Key = pAdapter->SharedKey[BSS0][KeyIdx].Key; @@ -4335,7 +4299,6 @@ INT RTMPSetInformation( } kfree(pWepKey); break; -#ifdef WPA_SUPPLICANT_SUPPORT case OID_SET_COUNTERMEASURES: if (wrq->u.data.length != sizeof(int)) Status = -EINVAL; @@ -4469,95 +4432,6 @@ INT RTMPSetInformation( if(pPmkId) kfree(pPmkId); break; -#endif // WPA_SUPPLICANT_SUPPORT // - - - -#ifdef SNMP_SUPPORT - case OID_802_11_SHORTRETRYLIMIT: - if (wrq->u.data.length != sizeof(ULONG)) - Status = -EINVAL; - else - { - Status = copy_from_user(&ShortRetryLimit, wrq->u.data.pointer, wrq->u.data.length); - RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word); - tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit; - RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word); - DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SHORTRETRYLIMIT (tx_rty_cfg.field.ShortRetryLimit=%d, ShortRetryLimit=%ld)\n", tx_rty_cfg.field.ShortRtyLimit, ShortRetryLimit)); - } - break; - - case OID_802_11_LONGRETRYLIMIT: - DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT \n")); - if (wrq->u.data.length != sizeof(ULONG)) - Status = -EINVAL; - else - { - Status = copy_from_user(&LongRetryLimit, wrq->u.data.pointer, wrq->u.data.length); - RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word); - tx_rty_cfg.field.LongRtyLimit = LongRetryLimit; - RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word); - DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_LONGRETRYLIMIT (tx_rty_cfg.field.LongRetryLimit= %d,LongRetryLimit=%ld)\n", tx_rty_cfg.field.LongRtyLimit, LongRetryLimit)); - } - break; - - case OID_802_11_WEPDEFAULTKEYVALUE: - DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE\n")); - pKey = kmalloc(wrq->u.data.length, GFP_KERNEL); - Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length); - //pKey = &WepKey; - - if ( pKey->Length != wrq->u.data.length) - { - Status = -EINVAL; - DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYVALUE, Failed!!\n")); - } - KeyIdx = pKey->KeyIndex & 0x0fffffff; - DBGPRINT(RT_DEBUG_TRACE,("pKey->KeyIndex =%d, pKey->KeyLength=%d\n", pKey->KeyIndex, pKey->KeyLength)); - - // it is a shared key - if (KeyIdx > 4) - Status = -EINVAL; - else - { - pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen = (UCHAR) pKey->KeyLength; - NdisMoveMemory(&pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, &pKey->KeyMaterial, pKey->KeyLength); - if (pKey->KeyIndex & 0x80000000) - { - // Default key for tx (shared key) - pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx; - } - //RestartAPIsRequired = TRUE; - } - break; - - - case OID_802_11_WEPDEFAULTKEYID: - DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEPDEFAULTKEYID \n")); - - if (wrq->u.data.length != sizeof(UCHAR)) - Status = -EINVAL; - else - Status = copy_from_user(&pAdapter->StaCfg.DefaultKeyId, wrq->u.data.pointer, wrq->u.data.length); - - break; - - - case OID_802_11_CURRENTCHANNEL: - DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CURRENTCHANNEL \n")); - if (wrq->u.data.length != sizeof(UCHAR)) - Status = -EINVAL; - else - { - Status = copy_from_user(&ctmp, wrq->u.data.pointer, wrq->u.data.length); - sprintf(&ctmp,"%d", ctmp); - Set_Channel_Proc(pAdapter, &ctmp); - } - break; -#endif - - - default: DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd)); Status = -EOPNOTSUPP; @@ -4599,16 +4473,6 @@ INT RTMPQueryInformation( UCHAR driverVersion[8]; OID_SET_HT_PHYMODE *pHTPhyMode = NULL; - -#ifdef SNMP_SUPPORT - //for snmp, kathy - DefaultKeyIdxValue *pKeyIdxValue; - INT valueLen; - TX_RTY_CFG_STRUC tx_rty_cfg; - ULONG ShortRetryLimit, LongRetryLimit; - UCHAR tmp[64]; -#endif //SNMP - switch(cmd) { case RT_OID_DEVICE_NAME: @@ -4625,16 +4489,6 @@ INT RTMPQueryInformation( Status = -EFAULT; } break; -#ifdef RALINK_ATE - case RT_QUERY_ATE_TXDONE_COUNT: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n")); - wrq->u.data.length = sizeof(UINT32); - if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length)) - { - Status = -EFAULT; - } - break; -#endif // RALINK_ATE // case OID_802_11_BSSID_LIST: if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) { @@ -4776,14 +4630,6 @@ INT RTMPQueryInformation( Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length); break; case OID_802_11_BSSID: -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - Status = NDIS_STATUS_RESOURCES; - break; - } -#endif // RALINK_ATE // if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter)) { Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS)); @@ -5121,7 +4967,6 @@ INT RTMPQueryInformation( Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length); DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n", pAdapter->CommonCfg.bWmmCapable)); break; -#ifdef WPA_SUPPLICANT_SUPPORT case RT_OID_NEW_DRIVER: { UCHAR enabled = 1; @@ -5135,8 +4980,6 @@ INT RTMPQueryInformation( Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length); DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP)); break; -#endif // WPA_SUPPLICANT_SUPPORT // - case RT_OID_DRIVER_DEVICE_NAME: DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n")); wrq->u.data.length = 16; @@ -5211,154 +5054,20 @@ INT RTMPQueryInformation( case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT: wrq->u.data.length = sizeof(UCHAR); i = 0; -#ifdef MULTIPLE_CARD_SUPPORT - i = 1; -#endif // MULTIPLE_CARD_SUPPORT // if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length)) { Status = -EFAULT; } DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i)); break; -#ifdef SNMP_SUPPORT - case RT_OID_802_11_MAC_ADDRESS: - wrq->u.data.length = MAC_ADDR_LEN; - Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length); - break; - - case RT_OID_802_11_MANUFACTUREROUI: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREROUI \n")); - wrq->u.data.length = ManufacturerOUI_LEN; - Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length); - break; - - case RT_OID_802_11_MANUFACTURERNAME: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTURERNAME \n")); - wrq->u.data.length = strlen(ManufacturerNAME); - Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length); - break; - - case RT_OID_802_11_RESOURCETYPEIDNAME: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_RESOURCETYPEIDNAME \n")); - wrq->u.data.length = strlen(ResourceTypeIdName); - Status = copy_to_user(wrq->u.data.pointer, ResourceTypeIdName, wrq->u.data.length); - break; - - case RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRIVACYOPTIONIMPLEMENTED \n")); - ulInfo = 1; // 1 is support wep else 2 is not support. - wrq->u.data.length = sizeof(ulInfo); - Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length); - break; - - case RT_OID_802_11_POWERMANAGEMENTMODE: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_POWERMANAGEMENTMODE \n")); - if (pAdapter->StaCfg.Psm == PSMP_ACTION) - ulInfo = 1; // 1 is power active else 2 is power save. - else - ulInfo = 2; - - wrq->u.data.length = sizeof(ulInfo); - Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length); - break; - - case OID_802_11_WEPDEFAULTKEYVALUE: - DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEPDEFAULTKEYVALUE \n")); - //KeyIdxValue.KeyIdx = pAd->PortCfg.MBSSID[pAd->IoctlIF].DefaultKeyId; - pKeyIdxValue = wrq->u.data.pointer; - DBGPRINT(RT_DEBUG_TRACE,("KeyIdxValue.KeyIdx = %d, \n",pKeyIdxValue->KeyIdx)); - valueLen = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen; - NdisMoveMemory(pKeyIdxValue->Value, - &pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, - valueLen); - pKeyIdxValue->Value[valueLen]='\0'; - - wrq->u.data.length = sizeof(DefaultKeyIdxValue); - - Status = copy_to_user(wrq->u.data.pointer, pKeyIdxValue, wrq->u.data.length); - DBGPRINT(RT_DEBUG_TRACE,("DefaultKeyId = %d, total len = %d, str len=%d, KeyValue= %02x %02x %02x %02x \n", pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen, - pAdapter->SharedKey[BSS0][0].Key[0], - pAdapter->SharedKey[BSS0][1].Key[0], - pAdapter->SharedKey[BSS0][2].Key[0], - pAdapter->SharedKey[BSS0][3].Key[0])); - break; - - case OID_802_11_WEPDEFAULTKEYID: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPDEFAULTKEYID \n")); - wrq->u.data.length = sizeof(UCHAR); - Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.DefaultKeyId, wrq->u.data.length); - DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyId =%d \n", pAdapter->StaCfg.DefaultKeyId)); - break; - - case RT_OID_802_11_WEPKEYMAPPINGLENGTH: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_WEPKEYMAPPINGLENGTH \n")); - wrq->u.data.length = sizeof(UCHAR); - Status = copy_to_user(wrq->u.data.pointer, - &pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen, - wrq->u.data.length); - break; - - case OID_802_11_SHORTRETRYLIMIT: - DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SHORTRETRYLIMIT \n")); - wrq->u.data.length = sizeof(ULONG); - RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word); - ShortRetryLimit = tx_rty_cfg.field.ShortRtyLimit; - DBGPRINT(RT_DEBUG_TRACE, ("ShortRetryLimit =%ld, tx_rty_cfg.field.ShortRetryLimit=%d\n", ShortRetryLimit, tx_rty_cfg.field.ShortRtyLimit)); - Status = copy_to_user(wrq->u.data.pointer, &ShortRetryLimit, wrq->u.data.length); - break; - - case OID_802_11_LONGRETRYLIMIT: - DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_LONGRETRYLIMIT \n")); - wrq->u.data.length = sizeof(ULONG); - RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word); - LongRetryLimit = tx_rty_cfg.field.LongRtyLimit; - DBGPRINT(RT_DEBUG_TRACE, ("LongRetryLimit =%ld, tx_rty_cfg.field.LongRtyLimit=%d\n", LongRetryLimit, tx_rty_cfg.field.LongRtyLimit)); - Status = copy_to_user(wrq->u.data.pointer, &LongRetryLimit, wrq->u.data.length); - break; - - case RT_OID_802_11_PRODUCTID: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n")); - - { - - USHORT device_id; - if (((POS_COOKIE)pAdapter->OS_Cookie)->pci_dev != NULL) - pci_read_config_word(((POS_COOKIE)pAdapter->OS_Cookie)->pci_dev, PCI_DEVICE_ID, &device_id); - else - DBGPRINT(RT_DEBUG_TRACE, (" pci_dev = NULL\n")); - sprintf(tmp, "%04x %04x\n", NIC_PCI_VENDOR_ID, device_id); - } - wrq->u.data.length = strlen(tmp); - Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length); - break; - - case RT_OID_802_11_MANUFACTUREID: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_MANUFACTUREID \n")); - wrq->u.data.length = strlen(ManufacturerNAME); - Status = copy_to_user(wrq->u.data.pointer, ManufacturerNAME, wrq->u.data.length); - break; - - case OID_802_11_CURRENTCHANNEL: - DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CURRENTCHANNEL \n")); - wrq->u.data.length = sizeof(UCHAR); - DBGPRINT(RT_DEBUG_TRACE, ("sizeof UCHAR=%d, channel=%d \n", sizeof(UCHAR), pAdapter->CommonCfg.Channel)); - Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Channel, wrq->u.data.length); - DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status)); - break; -#endif //SNMP_SUPPORT case OID_802_11_BUILD_CHANNEL_EX: { UCHAR value; DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n")); wrq->u.data.length = sizeof(UCHAR); -#ifdef EXT_BUILD_CHANNEL_LIST - DBGPRINT(RT_DEBUG_TRACE, ("Support EXT_BUILD_CHANNEL_LIST.\n")); - value = 1; -#else DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n")); value = 0; -#endif // EXT_BUILD_CHANNEL_LIST // Status = copy_to_user(wrq->u.data.pointer, &value, 1); DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status)); } @@ -5409,35 +5118,6 @@ INT RTMPQueryInformation( DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status)); break; - -#ifdef QOS_DLS_SUPPORT - case RT_OID_802_11_QUERY_DLS: - wrq->u.data.length = sizeof(BOOLEAN); - Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bDLSCapable, wrq->u.data.length); - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS(=%d)\n", pAdapter->CommonCfg.bDLSCapable)); - break; - - case RT_OID_802_11_QUERY_DLS_PARAM: - { - PRT_802_11_DLS_INFO pDlsInfo = kmalloc(sizeof(RT_802_11_DLS_INFO), GFP_ATOMIC); - if (pDlsInfo == NULL) - break; - - for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) - { - RTMPMoveMemory(&pDlsInfo->Entry[i], &pAdapter->StaCfg.DLSEntry[i], sizeof(RT_802_11_DLS_UI)); - } - - pDlsInfo->num = MAX_NUM_OF_DLS_ENTRY; - wrq->u.data.length = sizeof(RT_802_11_DLS_INFO); - Status = copy_to_user(wrq->u.data.pointer, pDlsInfo, wrq->u.data.length); - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_DLS_PARAM\n")); - - if (pDlsInfo) - kfree(pDlsInfo); - } - break; -#endif // QOS_DLS_SUPPORT // default: DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd)); Status = -EOPNOTSUPP; @@ -5480,14 +5160,6 @@ INT rt28xx_sta_ioctl( //check if the interface is down if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { -#ifdef CONFIG_APSTA_MIXED_SUPPORT - if (wrq->u.data.pointer == NULL) - { - return Status; - } - - if (strstr(wrq->u.data.pointer, "OpMode") == NULL) -#endif // CONFIG_APSTA_MIXED_SUPPORT // { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -5501,15 +5173,6 @@ INT rt28xx_sta_ioctl( switch(cmd) { -#ifdef RALINK_ATE -#ifdef RALINK_28xx_QA - case RTPRIV_IOCTL_ATE: - { - RtmpDoAte(pAd, wrq); - } - break; -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // case SIOCGIFHWADDR: DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n")); memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN); @@ -5640,6 +5303,9 @@ INT rt28xx_sta_ioctl( Status = -EOPNOTSUPP; break; case RT_PRIV_IOCTL: +#ifdef RT30xx + case RT_PRIV_IOCTL_EXT: +#endif subcmd = wrq->u.data.flags; if( subcmd & OID_GET_SET_TOGGLE) Status = RTMPSetInformation(pAd, rq, subcmd); @@ -5671,6 +5337,11 @@ INT rt28xx_sta_ioctl( case RTPRIV_IOCTL_E2P: RTMPIoctlE2PROM(pAd, wrq); break; +#ifdef RT30xx + case RTPRIV_IOCTL_RF: + RTMPIoctlRF(pAd, wrq); + break; +#endif // RT30xx // #endif // DBG // case SIOCETHTOOL: break; @@ -5766,6 +5437,9 @@ INT Set_WmmCapable_Proc( bWmmCapable = simple_strtol(arg, 0, 10); if ((bWmmCapable == 1) +#ifdef RT2870 + && (pAd->NumberOfPipes >= 5) +#endif // RT2870 // ) pAd->CommonCfg.bWmmCapable = TRUE; else if (bWmmCapable == 0) @@ -5873,19 +5547,14 @@ INT Set_NetworkType_Proc( DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n")); if (pAdapter->CommonCfg.CentralChannel == 0) { -#ifdef DOT11_N_SUPPORT if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED) pAdapter->CommonCfg.CentralChannel = 36; else -#endif // DOT11_N_SUPPORT // pAdapter->CommonCfg.CentralChannel = 6; } -#ifdef DOT11_N_SUPPORT else N_ChannelCheck(pAdapter); -#endif // DOT11_N_SUPPORT // -#ifdef DOT11_N_SUPPORT if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 && pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE) @@ -5936,7 +5605,6 @@ INT Set_NetworkType_Proc( pAdapter->CommonCfg.CentralChannel)); } else -#endif // DOT11_N_SUPPORT // { // 20MHz RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue); @@ -5997,12 +5665,10 @@ INT Set_AuthMode_Proc( pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone; else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0)) pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK; -#ifdef WPA_SUPPLICANT_SUPPORT else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0)) pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA; else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0)) pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2; -#endif // WPA_SUPPLICANT_SUPPORT // else return FALSE; @@ -6544,7 +6210,6 @@ INT Set_PSMode_Proc( return TRUE; } -#ifdef WPA_SUPPLICANT_SUPPORT /* ========================================================================== Description: @@ -6575,7 +6240,6 @@ INT Set_Wpa_Support( return TRUE; } -#endif // WPA_SUPPLICANT_SUPPORT // #ifdef DBG /* @@ -6608,7 +6272,9 @@ VOID RTMPIoctlMAC( UCHAR temp[16], temp2[16]; UINT32 macValue = 0; INT Status; - +#ifdef RT30xx + BOOLEAN bIsPrintAllMAC = FALSE; +#endif memset(msg, 0x00, 1024); if (wrq->u.data.length > 1) //No parameters. @@ -6659,7 +6325,13 @@ VOID RTMPIoctlMAC( sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr , macValue); } else +#ifndef RT30xx {//Invalid parametes, so default printk all bbp +#endif +#ifdef RT30xx + {//Invalid parametes, so default printk all mac + bIsPrintAllMAC = TRUE; +#endif goto next; } } @@ -6730,13 +6402,6 @@ VOID RTMPIoctlMAC( UCHAR R66; pAdapter->BbpTuning.bEnable = FALSE; R66 = 0x26 + GET_LNA_GAIN(pAdapter); -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter))); - } - else -#endif // RALINK_ATE // RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter))); DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66)); } @@ -6750,7 +6415,52 @@ VOID RTMPIoctlMAC( } } } +#ifdef RT30xx + else + bIsPrintAllMAC = TRUE; +#endif next: +#ifdef RT30xx + if (bIsPrintAllMAC) + { + struct file *file_w; + PCHAR fileName = "MacDump.txt"; + mm_segment_t orig_fs; + + orig_fs = get_fs(); + set_fs(KERNEL_DS); + + // open file + file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0); + if (IS_ERR(file_w)) + { + DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName)); + } + else + { + if (file_w->f_op && file_w->f_op->write) + { + file_w->f_pos = 0; + macAddr = 0x1000; + + while (macAddr <= 0x1800) + { + RTMP_IO_READ32(pAdapter, macAddr, &macValue); + sprintf(msg, "%08lx = %08X\n", macAddr, macValue); + + // write data to file + file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos); + + printk("%s", msg); + macAddr += 4; + } + sprintf(msg, "\nDump all MAC values to %s\n", fileName); + } + filp_close(file_w, NULL); + } + set_fs(orig_fs); + } +#endif /* RT30xx */ if(strlen(msg) == 1) sprintf(msg+strlen(msg), "===>Error command format!"); @@ -6791,7 +6501,9 @@ VOID RTMPIoctlE2PROM( UCHAR temp[16], temp2[16]; USHORT eepValue; int Status; - +#ifdef RT30xx + BOOLEAN bIsPrintAllE2P = FALSE; +#endif memset(msg, 0x00, 1024); if (wrq->u.data.length > 1) //No parameters. @@ -6845,6 +6557,9 @@ VOID RTMPIoctlE2PROM( } else {//Invalid parametes, so default printk all bbp +#ifdef RT30xx + bIsPrintAllE2P = TRUE; +#endif goto next; } } @@ -6903,7 +6618,52 @@ VOID RTMPIoctlE2PROM( sprintf(msg+strlen(msg), "[0x%02X]:%02X ", eepAddr, eepValue); } } +#ifdef RT30xx + else + bIsPrintAllE2P = TRUE; +#endif next: +#ifdef RT30xx + if (bIsPrintAllE2P) + { + struct file *file_w; + PCHAR fileName = "EEPROMDump.txt"; + mm_segment_t orig_fs; + + orig_fs = get_fs(); + set_fs(KERNEL_DS); + + // open file + file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0); + if (IS_ERR(file_w)) + { + DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName)); + } + else + { + if (file_w->f_op && file_w->f_op->write) + { + file_w->f_pos = 0; + eepAddr = 0x00; + + while (eepAddr <= 0xFE) + { + RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue); + sprintf(msg, "%08x = %04x\n", eepAddr , eepValue); + + // write data to file + file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos); + + printk("%s", msg); + eepAddr += 2; + } + sprintf(msg, "\nDump all EEPROM values to %s\n", fileName); + } + filp_close(file_w, NULL); + } + set_fs(orig_fs); + } +#endif /* RT30xx */ if(strlen(msg) == 1) sprintf(msg+strlen(msg), "===>Error command format!"); @@ -6914,6 +6674,154 @@ next: DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n")); } +#ifdef RT30xx +/* + ========================================================================== + Description: + Read / Write RF register +Arguments: + pAdapter Pointer to our adapter + wrq Pointer to the ioctl argument + + Return Value: + None + + Note: + Usage: + 1.) iwpriv ra0 rf ==> read all RF registers + 2.) iwpriv ra0 rf 1 ==> read RF where RegID=1 + 3.) iwpriv ra0 rf 1=10 ==> write RF R1=0x10 + ========================================================================== +*/ +VOID RTMPIoctlRF( + IN PRTMP_ADAPTER pAdapter, + IN struct iwreq *wrq) +{ + CHAR *this_char; + CHAR *value; + UCHAR regRF = 0; + CHAR msg[2048]; + CHAR arg[255]; + INT rfId; + LONG rfValue; + int Status; + BOOLEAN bIsPrintAllRF = FALSE; + + + memset(msg, 0x00, 2048); + if (wrq->u.data.length > 1) //No parameters. + { + Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length); + sprintf(msg, "\n"); + + //Parsing Read or Write + this_char = arg; + if (!*this_char) + goto next; + + if ((value = strchr(this_char, '=')) != NULL) + *value++ = 0; + + if (!value || !*value) + { //Read + if (sscanf(this_char, "%d", &(rfId)) == 1) + { + if (rfId <= 31) + { + // In RT2860 ATE mode, we do not load 8051 firmware. + //We must access RF directly. + // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined. + // according to Andy, Gary, David require. + // the command rf shall read rf register directly for dubug. + // BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); + RT30xxReadRFRegister(pAdapter, rfId, ®RF); + + sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X ", rfId, rfId*2, regRF); + } + else + {//Invalid parametes, so default printk all RF + bIsPrintAllRF = TRUE; + goto next; + } + } + else + { //Invalid parametes, so default printk all RF + bIsPrintAllRF = TRUE; + goto next; + } + } + else + { //Write + if ((sscanf(this_char, "%d", &(rfId)) == 1) && (sscanf(value, "%lx", &(rfValue)) == 1)) + { + if (rfId <= 31) + { + // In RT2860 ATE mode, we do not load 8051 firmware. + // We should access RF registers directly. + // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined. + { + // according to Andy, Gary, David require. + // the command RF shall read/write RF register directly for dubug. + //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); + //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue); + RT30xxReadRFRegister(pAdapter, rfId, ®RF); + RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue); + //Read it back for showing + //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); + RT30xxReadRFRegister(pAdapter, rfId, ®RF); + sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF); + } + } + else + {//Invalid parametes, so default printk all RF + bIsPrintAllRF = TRUE; + } + } + else + { //Invalid parametes, so default printk all RF + bIsPrintAllRF = TRUE; + } + } + } + else + bIsPrintAllRF = TRUE; +next: + if (bIsPrintAllRF) + { + memset(msg, 0x00, 2048); + sprintf(msg, "\n"); + for (rfId = 0; rfId <= 31; rfId++) + { + // according to Andy, Gary, David require. + // the command RF shall read/write RF register directly for dubug. + RT30xxReadRFRegister(pAdapter, rfId, ®RF); + sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF); + } + // Copy the information into the user buffer + DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg))); + wrq->u.data.length = strlen(msg); + if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length)) + { + DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__)); + } + } + else + { + if(strlen(msg) == 1) + sprintf(msg+strlen(msg), "===>Error command format!"); + + DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg)); + // Copy the information into the user buffer + DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg))); + + // Copy the information into the user buffer + wrq->u.data.length = strlen(msg); + Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); + } + + DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n")); +} +#endif // RT30xx // #endif // DBG // @@ -6960,37 +6868,47 @@ INT Set_ShortRetryLimit_Proc( return TRUE; } -#ifdef EXT_BUILD_CHANNEL_LIST -INT Set_Ieee80211dClientMode_Proc( - IN PRTMP_ADAPTER pAdapter, - IN PUCHAR arg) +#if !defined(RT2860) && !defined(RT30xx) +INT Show_Adhoc_MacTable_Proc( + IN PRTMP_ADAPTER pAd, + IN PCHAR extra) { - if (simple_strtol(arg, 0, 10) == 0) - pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_None; - else if (simple_strtol(arg, 0, 10) == 1) - pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Flexible; - else if (simple_strtol(arg, 0, 10) == 2) - pAdapter->StaCfg.IEEE80211dClientMode = Rt802_11_D_Strict; - else - return FALSE; + INT i; - DBGPRINT(RT_DEBUG_TRACE, ("Set_Ieee802dMode_Proc::(IEEEE0211dMode=%d)\n", pAdapter->StaCfg.IEEE80211dClientMode)); - return TRUE; -} -#endif // EXT_BUILD_CHANNEL_LIST // + sprintf(extra, "\n"); -#ifdef CARRIER_DETECTION_SUPPORT -INT Set_CarrierDetect_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - if (simple_strtol(arg, 0, 10) == 0) - pAd->CommonCfg.CarrierDetect.Enable = FALSE; - else - pAd->CommonCfg.CarrierDetect.Enable = TRUE; + sprintf(extra + strlen(extra), "HT Operating Mode : %d\n", pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode); + + sprintf(extra + strlen(extra), "\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n", + "MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC"); + + for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++) + { + PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i]; + + if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30)) + break; + if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC)) + { + sprintf(extra + strlen(extra), "%02X:%02X:%02X:%02X:%02X:%02X ", + pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2], + pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]); + sprintf(extra + strlen(extra), "%-4d", (int)pEntry->Aid); + sprintf(extra + strlen(extra), "%-4d", (int)pEntry->apidx); + sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi0); + sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi1); + sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi2); + sprintf(extra + strlen(extra), "%-10s", GetPhyMode(pEntry->HTPhyMode.field.MODE)); + sprintf(extra + strlen(extra), "%-6s", GetBW(pEntry->HTPhyMode.field.BW)); + sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.MCS); + sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.ShortGI); + sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.STBC); + sprintf(extra + strlen(extra), "%-10d, %d, %d%%\n", pEntry->DebugFIFOCount, pEntry->DebugTxCount, + (pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0); + sprintf(extra, "%s\n", extra); + } + } - DBGPRINT(RT_DEBUG_TRACE, ("IF Set_CarrierDetect_Proc::(CarrierDetect.Enable=%d)\n", pAd->CommonCfg.CarrierDetect.Enable)); return TRUE; } -#endif // CARRIER_DETECTION_SUPPORT // - +#endif /* RT2870 */ |