diff options
Diffstat (limited to 'drivers/staging/rtl8187se/ieee80211/ieee80211.h')
| -rw-r--r-- | drivers/staging/rtl8187se/ieee80211/ieee80211.h | 1755 |
1 files changed, 1755 insertions, 0 deletions
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h new file mode 100644 index 000000000000..58336080ad50 --- /dev/null +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h @@ -0,0 +1,1755 @@ +/* + * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11 + * remains copyright by the original authors + * + * Portions of the merged code are based on Host AP (software wireless + * LAN access point) driver for Intersil Prism2/2.5/3. + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> + * + * Adaption to a generic IEEE 802.11 stack by James Ketrenos + * <jketreno@linux.intel.com> + * Copyright (c) 2004, Intel Corporation + * + * Modified for Realtek's wi-fi cards by Andrea Merello + * <andreamrl@tiscali.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + */ +#ifndef IEEE80211_H +#define IEEE80211_H +#include <linux/if_ether.h> /* ETH_ALEN */ +#include <linux/kernel.h> /* ARRAY_SIZE */ +#include <linux/version.h> +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/sched.h> + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13)) +#include <linux/wireless.h> +#endif + +/* +#ifndef bool +#define bool int +#endif + +#ifndef true +#define true 1 +#endif + +#ifndef false +#define false 0 +#endif +*/ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)) +#ifndef bool +typedef enum{false = 0, true} bool; +#endif +#endif +//#ifdef JOHN_HWSEC +#define KEY_TYPE_NA 0x0 +#define KEY_TYPE_WEP40 0x1 +#define KEY_TYPE_TKIP 0x2 +#define KEY_TYPE_CCMP 0x4 +#define KEY_TYPE_WEP104 0x5 +//#endif + + +#define aSifsTime 10 + +#define MGMT_QUEUE_NUM 5 + + +#define IEEE_CMD_SET_WPA_PARAM 1 +#define IEEE_CMD_SET_WPA_IE 2 +#define IEEE_CMD_SET_ENCRYPTION 3 +#define IEEE_CMD_MLME 4 + +#define IEEE_PARAM_WPA_ENABLED 1 +#define IEEE_PARAM_TKIP_COUNTERMEASURES 2 +#define IEEE_PARAM_DROP_UNENCRYPTED 3 +#define IEEE_PARAM_PRIVACY_INVOKED 4 +#define IEEE_PARAM_AUTH_ALGS 5 +#define IEEE_PARAM_IEEE_802_1X 6 +//It should consistent with the driver_XXX.c +// David, 2006.9.26 +#define IEEE_PARAM_WPAX_SELECT 7 +//Added for notify the encryption type selection +// David, 2006.9.26 +#define IEEE_PROTO_WPA 1 +#define IEEE_PROTO_RSN 2 +//Added for notify the encryption type selection +// David, 2006.9.26 +#define IEEE_WPAX_USEGROUP 0 +#define IEEE_WPAX_WEP40 1 +#define IEEE_WPAX_TKIP 2 +#define IEEE_WPAX_WRAP 3 +#define IEEE_WPAX_CCMP 4 +#define IEEE_WPAX_WEP104 5 + +#define IEEE_KEY_MGMT_IEEE8021X 1 +#define IEEE_KEY_MGMT_PSK 2 + + + +#define IEEE_MLME_STA_DEAUTH 1 +#define IEEE_MLME_STA_DISASSOC 2 + + +#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2 +#define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3 +#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4 +#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5 +#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6 +#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7 + + +#define IEEE_CRYPT_ALG_NAME_LEN 16 + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10)) +#define ieee80211_wx_get_scan ieee80211_wx_get_scan_rtl +#define ieee80211_wx_set_encode ieee80211_wx_set_encode_rtl +#define ieee80211_wx_get_encode ieee80211_wx_get_encode_rtl +//////////////////////////////// +// added for kernel conflict under FC5 +#define ieee80211_wx_get_name ieee80211_wx_get_name_rtl +#define free_ieee80211 free_ieee80211_rtl +#define alloc_ieee80211 alloc_ieee80211_rtl +/////////////////////////////// +#endif +//error in ubuntu2.6.22,so add these +#define ieee80211_wake_queue ieee80211_wake_queue_rtl +#define ieee80211_stop_queue ieee80211_stop_queue_rtl + +#define ieee80211_rx ieee80211_rx_rtl + +#define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rtl +#define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rtl +#define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rtl +#define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rtl +#define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rtl +#define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rtl + +#define ieee80211_txb_free ieee80211_txb_free_rtl +#define ieee80211_wx_get_essid ieee80211_wx_get_essid_rtl +#define ieee80211_wx_set_essid ieee80211_wx_set_essid_rtl +#define ieee80211_wx_set_rate ieee80211_wx_set_rate_rtl +#define ieee80211_wx_get_rate ieee80211_wx_get_rate_rtl +#define ieee80211_wx_set_wap ieee80211_wx_set_wap_rtl +#define ieee80211_wx_get_wap ieee80211_wx_get_wap_rtl +#define ieee80211_wx_set_mode ieee80211_wx_set_mode_rtl +#define ieee80211_wx_get_mode ieee80211_wx_get_mode_rtl +#define ieee80211_wx_set_scan ieee80211_wx_set_scan_rtl +#define ieee80211_wx_get_freq ieee80211_wx_get_freq_rtl +#define ieee80211_wx_set_freq ieee80211_wx_set_freq_rtl +#define ieee80211_wx_set_rawtx ieee80211_wx_set_rawtx_rtl +#define ieee80211_wx_set_power ieee80211_wx_set_power_rtl +#define ieee80211_wx_get_power ieee80211_wx_get_power_rtl +#define ieee80211_wlan_frequencies ieee80211_wlan_frequencies_rtl +#define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rtl +#define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rtl +#define ieee80211_start_protocol ieee80211_start_protocol_rtl +#define ieee80211_stop_protocol ieee80211_stop_protocol_rtl +#define ieee80211_rx_mgt ieee80211_rx_mgt_rtl + +#define ieee80211_wx_set_auth ieee80211_wx_set_auth_rtl +//by amy for ps +#define notify_wx_assoc_event notify_wx_assoc_event_rtl +#define ieee80211_stop_send_beacons ieee80211_stop_send_beacons_rtl +#define ieee80211_disassociate ieee80211_disassociate_rtl +#define ieee80211_start_scan ieee80211_start_scan_rtl +//by amy for ps +typedef struct ieee_param { + u32 cmd; + u8 sta_addr[ETH_ALEN]; + union { + struct { + u8 name; + u32 value; + } wpa_param; + struct { + u32 len; + u8 reserved[32]; + u8 data[0]; + } wpa_ie; + struct{ + int command; + int reason_code; + } mlme; + struct { + u8 alg[IEEE_CRYPT_ALG_NAME_LEN]; + u8 set_tx; + u32 err; + u8 idx; + u8 seq[8]; /* sequence counter (set: RX, get: TX) */ + u16 key_len; + u8 key[0]; + } crypt; + + } u; +}ieee_param; + + +#if WIRELESS_EXT < 17 +#define IW_QUAL_QUAL_INVALID 0x10 +#define IW_QUAL_LEVEL_INVALID 0x20 +#define IW_QUAL_NOISE_INVALID 0x40 +#define IW_QUAL_QUAL_UPDATED 0x1 +#define IW_QUAL_LEVEL_UPDATED 0x2 +#define IW_QUAL_NOISE_UPDATED 0x4 +#endif + +// linux under 2.6.9 release may not support it, so modify it for common use +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)) +#define MSECS(t) (1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ) +static inline unsigned long msleep_interruptible_rtl(unsigned int msecs) +{ + unsigned long timeout = MSECS(msecs) + 1; + + while (timeout) { + set_current_state(TASK_UNINTERRUPTIBLE); + timeout = schedule_timeout(timeout); + } + return timeout; +} +#else +#define MSECS(t) msecs_to_jiffies(t) +#define msleep_interruptible_rtl msleep_interruptible +#endif + +#define IEEE80211_DATA_LEN 2304 +/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section + 6.2.1.1.2. + + The figure in section 7.1.2 suggests a body size of up to 2312 + bytes is allowed, which is a bit confusing, I suspect this + represents the 2304 bytes of real data, plus a possible 8 bytes of + WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + + +#define IEEE80211_HLEN 30 +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) + +/* this is stolen and modified from the madwifi driver*/ +#define IEEE80211_FC0_TYPE_MASK 0x0c +#define IEEE80211_FC0_TYPE_DATA 0x08 +#define IEEE80211_FC0_SUBTYPE_MASK 0xB0 +#define IEEE80211_FC0_SUBTYPE_QOS 0x80 + +#define IEEE80211_QOS_HAS_SEQ(fc) \ + (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \ + (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS)) + +/* this is stolen from ipw2200 driver */ +#define IEEE_IBSS_MAC_HASH_SIZE 31 +struct ieee_ibss_seq { + u8 mac[ETH_ALEN]; + u16 seq_num[17]; + u16 frag_num[17]; + unsigned long packet_time[17]; + struct list_head list; +}; + +struct ieee80211_hdr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_QOS { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; + u16 QOS_ctl; +} __attribute__ ((packed)); + +struct ieee80211_hdr_3addr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; +} __attribute__ ((packed)); + +struct ieee80211_hdr_3addr_QOS { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u16 QOS_ctl; +} __attribute__ ((packed)); + +enum eap_type { + EAP_PACKET = 0, + EAPOL_START, + EAPOL_LOGOFF, + EAPOL_KEY, + EAPOL_ENCAP_ASF_ALERT +}; + +static const char *eap_types[] = { + [EAP_PACKET] = "EAP-Packet", + [EAPOL_START] = "EAPOL-Start", + [EAPOL_LOGOFF] = "EAPOL-Logoff", + [EAPOL_KEY] = "EAPOL-Key", + [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert" +}; + +static inline const char *eap_get_type(int type) +{ + return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type]; +} + +struct eapol { + u8 snap[6]; + u16 ethertype; + u8 version; + u8 type; + u16 length; +} __attribute__ ((packed)); + +#define IEEE80211_3ADDR_LEN 24 +#define IEEE80211_4ADDR_LEN 30 +#define IEEE80211_FCS_LEN 4 + +#define MIN_FRAG_THRESHOLD 256U +#define MAX_FRAG_THRESHOLD 2346U + +/* Frame control field constants */ +#define IEEE80211_FCTL_VERS 0x0002 +#define IEEE80211_FCTL_FTYPE 0x000c +#define IEEE80211_FCTL_STYPE 0x00f0 +#define IEEE80211_FCTL_TODS 0x0100 +#define IEEE80211_FCTL_FROMDS 0x0200 +#define IEEE80211_FCTL_DSTODS 0x0300 //added by david +#define IEEE80211_FCTL_MOREFRAGS 0x0400 +#define IEEE80211_FCTL_RETRY 0x0800 +#define IEEE80211_FCTL_PM 0x1000 +#define IEEE80211_FCTL_MOREDATA 0x2000 +#define IEEE80211_FCTL_WEP 0x4000 +#define IEEE80211_FCTL_ORDER 0x8000 + +#define IEEE80211_FTYPE_MGMT 0x0000 +#define IEEE80211_FTYPE_CTL 0x0004 +#define IEEE80211_FTYPE_DATA 0x0008 + +/* management */ +#define IEEE80211_STYPE_ASSOC_REQ 0x0000 +#define IEEE80211_STYPE_ASSOC_RESP 0x0010 +#define IEEE80211_STYPE_REASSOC_REQ 0x0020 +#define IEEE80211_STYPE_REASSOC_RESP 0x0030 +#define IEEE80211_STYPE_PROBE_REQ 0x0040 +#define IEEE80211_STYPE_PROBE_RESP 0x0050 +#define IEEE80211_STYPE_BEACON 0x0080 +#define IEEE80211_STYPE_ATIM 0x0090 +#define IEEE80211_STYPE_DISASSOC 0x00A0 +#define IEEE80211_STYPE_AUTH 0x00B0 +#define IEEE80211_STYPE_DEAUTH 0x00C0 +#define IEEE80211_STYPE_MANAGE_ACT 0x00D0 + +/* control */ +#define IEEE80211_STYPE_PSPOLL 0x00A0 +#define IEEE80211_STYPE_RTS 0x00B0 +#define IEEE80211_STYPE_CTS 0x00C0 +#define IEEE80211_STYPE_ACK 0x00D0 +#define IEEE80211_STYPE_CFEND 0x00E0 +#define IEEE80211_STYPE_CFENDACK 0x00F0 + +/* data */ +#define IEEE80211_STYPE_DATA 0x0000 +#define IEEE80211_STYPE_DATA_CFACK 0x0010 +#define IEEE80211_STYPE_DATA_CFPOLL 0x0020 +#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 +#define IEEE80211_STYPE_NULLFUNC 0x0040 +#define IEEE80211_STYPE_CFACK 0x0050 +#define IEEE80211_STYPE_CFPOLL 0x0060 +#define IEEE80211_STYPE_CFACKPOLL 0x0070 +#define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2 +#define IEEE80211_STYPE_QOS_NULL 0x00C0 + + +#define IEEE80211_SCTL_FRAG 0x000F +#define IEEE80211_SCTL_SEQ 0xFFF0 + + +/* debug macros */ + +#ifdef CONFIG_IEEE80211_DEBUG +extern u32 ieee80211_debug_level; +#define IEEE80211_DEBUG(level, fmt, args...) \ +do { if (ieee80211_debug_level & (level)) \ + printk(KERN_DEBUG "ieee80211: %c %s " fmt, \ + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) +#else +#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0) +#endif /* CONFIG_IEEE80211_DEBUG */ + +/* + * To use the debug system; + * + * If you are defining a new debug classification, simply add it to the #define + * list here in the form of: + * + * #define IEEE80211_DL_xxxx VALUE + * + * shifting value to the left one bit from the previous entry. xxxx should be + * the name of the classification (for example, WEP) + * + * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your + * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want + * to send output to that classification. + * + * To add your debug level to the list of levels seen when you perform + * + * % cat /proc/net/ipw/debug_level + * + * you simply need to add your entry to the ipw_debug_levels array. + * + * If you do not see debug_level in /proc/net/ipw then you do not have + * CONFIG_IEEE80211_DEBUG defined in your kernel configuration + * + */ + +#define IEEE80211_DL_INFO (1<<0) +#define IEEE80211_DL_WX (1<<1) +#define IEEE80211_DL_SCAN (1<<2) +#define IEEE80211_DL_STATE (1<<3) +#define IEEE80211_DL_MGMT (1<<4) +#define IEEE80211_DL_FRAG (1<<5) +#define IEEE80211_DL_EAP (1<<6) +#define IEEE80211_DL_DROP (1<<7) + +#define IEEE80211_DL_TX (1<<8) +#define IEEE80211_DL_RX (1<<9) + +#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) +#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) +#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a) + +#define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a) +#define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a) +//#define IEEE_DEBUG_SCAN IEEE80211_WARNING +#define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a) +#define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a) +#define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a) +#define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a) +#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a) +#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a) +#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <linux/if_arp.h> /* ARPHRD_ETHER */ + +#ifndef WIRELESS_SPY +#define WIRELESS_SPY // enable iwspy support +#endif +#include <net/iw_handler.h> // new driver API + +#ifndef ETH_P_PAE +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#endif /* ETH_P_PAE */ + +#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ + +#ifndef ETH_P_80211_RAW +#define ETH_P_80211_RAW (ETH_P_ECONET + 1) +#endif + +/* IEEE 802.11 defines */ + +#define P80211_OUI_LEN 3 + +struct ieee80211_snap_hdr { + + u8 dsap; /* always 0xAA */ + u8 ssap; /* always 0xAA */ + u8 ctrl; /* always 0x03 */ + u8 oui[P80211_OUI_LEN]; /* organizational universal id */ + +} __attribute__ ((packed)); + +#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr) + +#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE) +#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE) + +#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG) +#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ) + +/* Authentication algorithms */ +#define WLAN_AUTH_OPEN 0 +#define WLAN_AUTH_SHARED_KEY 1 + +#define WLAN_AUTH_CHALLENGE_LEN 128 + +#define WLAN_CAPABILITY_BSS (1<<0) +#define WLAN_CAPABILITY_IBSS (1<<1) +#define WLAN_CAPABILITY_CF_POLLABLE (1<<2) +#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) +#define WLAN_CAPABILITY_PRIVACY (1<<4) +#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) +#define WLAN_CAPABILITY_PBCC (1<<6) +#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) +#define WLAN_CAPABILITY_SHORT_SLOT (1<<10) + +/* Status codes */ +#define WLAN_STATUS_SUCCESS 0 +#define WLAN_STATUS_UNSPECIFIED_FAILURE 1 +#define WLAN_STATUS_CAPS_UNSUPPORTED 10 +#define WLAN_STATUS_REASSOC_NO_ASSOC 11 +#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12 +#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13 +#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14 +#define WLAN_STATUS_CHALLENGE_FAIL 15 +#define WLAN_STATUS_AUTH_TIMEOUT 16 +#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17 +#define WLAN_STATUS_ASSOC_DENIED_RATES 18 +/* 802.11b */ +#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19 +#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20 +#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21 + +/* Reason codes */ +#define WLAN_REASON_UNSPECIFIED 1 +#define WLAN_REASON_PREV_AUTH_NOT_VALID 2 +#define WLAN_REASON_DEAUTH_LEAVING 3 +#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4 +#define WLAN_REASON_DISASSOC_AP_BUSY 5 +#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6 +#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7 +#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8 +#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 + + +/* Information Element IDs */ +#define WLAN_EID_SSID 0 +#define WLAN_EID_SUPP_RATES 1 +#define WLAN_EID_FH_PARAMS 2 +#define WLAN_EID_DS_PARAMS 3 +#define WLAN_EID_CF_PARAMS 4 +#define WLAN_EID_TIM 5 +#define WLAN_EID_IBSS_PARAMS 6 +#define WLAN_EID_CHALLENGE 16 +#define WLAN_EID_RSN 48 +#define WLAN_EID_GENERIC 221 + +#define IEEE80211_MGMT_HDR_LEN 24 +#define IEEE80211_DATA_HDR3_LEN 24 +#define IEEE80211_DATA_HDR4_LEN 30 + + +#define IEEE80211_STATMASK_SIGNAL (1<<0) +#define IEEE80211_STATMASK_RSSI (1<<1) +#define IEEE80211_STATMASK_NOISE (1<<2) +#define IEEE80211_STATMASK_RATE (1<<3) +#define IEEE80211_STATMASK_WEMASK 0x7 + + +#define IEEE80211_CCK_MODULATION (1<<0) +#define IEEE80211_OFDM_MODULATION (1<<1) + +#define IEEE80211_24GHZ_BAND (1<<0) +#define IEEE80211_52GHZ_BAND (1<<1) + +#define IEEE80211_CCK_RATE_LEN 4 +#define IEEE80211_CCK_RATE_1MB 0x02 +#define IEEE80211_CCK_RATE_2MB 0x04 +#define IEEE80211_CCK_RATE_5MB 0x0B +#define IEEE80211_CCK_RATE_11MB 0x16 +#define IEEE80211_OFDM_RATE_LEN 8 +#define IEEE80211_OFDM_RATE_6MB 0x0C +#define IEEE80211_OFDM_RATE_9MB 0x12 +#define IEEE80211_OFDM_RATE_12MB 0x18 +#define IEEE80211_OFDM_RATE_18MB 0x24 +#define IEEE80211_OFDM_RATE_24MB 0x30 +#define IEEE80211_OFDM_RATE_36MB 0x48 +#define IEEE80211_OFDM_RATE_48MB 0x60 +#define IEEE80211_OFDM_RATE_54MB 0x6C +#define IEEE80211_BASIC_RATE_MASK 0x80 + +#define IEEE80211_CCK_RATE_1MB_MASK (1<<0) +#define IEEE80211_CCK_RATE_2MB_MASK (1<<1) +#define IEEE80211_CCK_RATE_5MB_MASK (1<<2) +#define IEEE80211_CCK_RATE_11MB_MASK (1<<3) +#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) +#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) +#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) +#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) +#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) +#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) +#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) +#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) + +#define IEEE80211_CCK_RATES_MASK 0x0000000F +#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ + IEEE80211_CCK_RATE_2MB_MASK) +#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \ + IEEE80211_CCK_RATE_5MB_MASK | \ + IEEE80211_CCK_RATE_11MB_MASK) + +#define IEEE80211_OFDM_RATES_MASK 0x00000FF0 +#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ + IEEE80211_OFDM_RATE_12MB_MASK | \ + IEEE80211_OFDM_RATE_24MB_MASK) +#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \ + IEEE80211_OFDM_RATE_9MB_MASK | \ + IEEE80211_OFDM_RATE_18MB_MASK | \ + IEEE80211_OFDM_RATE_36MB_MASK | \ + IEEE80211_OFDM_RATE_48MB_MASK | \ + IEEE80211_OFDM_RATE_54MB_MASK) +#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \ + IEEE80211_CCK_DEFAULT_RATES_MASK) + +#define IEEE80211_NUM_OFDM_RATES 8 +#define IEEE80211_NUM_CCK_RATES 4 +#define IEEE80211_OFDM_SHIFT_MASK_A 4 + + + + +/* NOTE: This data is for statistical purposes; not all hardware provides this + * information for frames received. Not setting these will not cause + * any adverse affects. */ +struct ieee80211_rx_stats { + u32 mac_time[2]; + u8 signalstrength; + s8 rssi; + u8 signal; + u8 noise; + u16 rate; /* in 100 kbps */ + u8 received_channel; + u8 control; + u8 mask; + u8 freq; + u16 len; + u8 nic_type; +}; + +/* IEEE 802.11 requires that STA supports concurrent reception of at least + * three fragmented frames. This define can be increased to support more + * concurrent frames, but it should be noted that each entry can consume about + * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ +#define IEEE80211_FRAG_CACHE_LEN 4 + +struct ieee80211_frag_entry { + unsigned long first_frag_time; + unsigned int seq; + unsigned int last_frag; + struct sk_buff *skb; + u8 src_addr[ETH_ALEN]; + u8 dst_addr[ETH_ALEN]; +}; + +struct ieee80211_stats { + unsigned int tx_unicast_frames; + unsigned int tx_multicast_frames; + unsigned int tx_fragments; + unsigned int tx_unicast_octets; + unsigned int tx_multicast_octets; + unsigned int tx_deferred_transmissions; + unsigned int tx_single_retry_frames; + unsigned int tx_multiple_retry_frames; + unsigned int tx_retry_limit_exceeded; + unsigned int tx_discards; + unsigned int rx_unicast_frames; + unsigned int rx_multicast_frames; + unsigned int rx_fragments; + unsigned int rx_unicast_octets; + unsigned int rx_multicast_octets; + unsigned int rx_fcs_errors; + unsigned int rx_discards_no_buffer; + unsigned int tx_discards_wrong_sa; + unsigned int rx_discards_undecryptable; + unsigned int rx_message_in_msg_fragments; + unsigned int rx_message_in_bad_msg_fragments; +}; + +struct ieee80211_softmac_stats{ + unsigned int rx_ass_ok; + unsigned int rx_ass_err; + unsigned int rx_probe_rq; + unsigned int tx_probe_rs; + unsigned int tx_beacons; + unsigned int rx_auth_rq; + unsigned int rx_auth_rs_ok; + unsigned int rx_auth_rs_err; + unsigned int tx_auth_rq; + unsigned int no_auth_rs; + unsigned int no_ass_rs; + unsigned int tx_ass_rq; + unsigned int rx_ass_rq; + unsigned int tx_probe_rq; + unsigned int reassoc; + unsigned int swtxstop; + unsigned int swtxawake; +}; + +struct ieee80211_device; + +#include "ieee80211_crypt.h" + +#define SEC_KEY_1 (1<<0) +#define SEC_KEY_2 (1<<1) +#define SEC_KEY_3 (1<<2) +#define SEC_KEY_4 (1<<3) +#define SEC_ACTIVE_KEY (1<<4) +#define SEC_AUTH_MODE (1<<5) +#define SEC_UNICAST_GROUP (1<<6) +#define SEC_LEVEL (1<<7) +#define SEC_ENABLED (1<<8) + +#define SEC_LEVEL_0 0 /* None */ +#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ +#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ +#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ +#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ + +#define WEP_KEYS 4 +#define WEP_KEY_LEN 13 + +#define WEP_KEY_LEN_MODIF 32 + +struct ieee80211_security { + u16 active_key:2, + enabled:1, + auth_mode:2, + auth_algo:4, + unicast_uses_group:1; + u8 key_sizes[WEP_KEYS]; + u8 keys[WEP_KEYS][WEP_KEY_LEN_MODIF]; + u8 level; + u16 flags; +} __attribute__ ((packed)); + + +/* + + 802.11 data frame from AP + + ,-------------------------------------------------------------------. +Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 | + |------|------|---------|---------|---------|------|---------|------| +Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs | + | | tion | (BSSID) | | | ence | data | | + `-------------------------------------------------------------------' + +Total: 28-2340 bytes + +*/ + +struct ieee80211_header_data { + u16 frame_ctl; + u16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + u16 seq_ctrl; +}; + +#define BEACON_PROBE_SSID_ID_POSITION 12 + +/* Management Frame Information Element Types */ +#define MFIE_TYPE_SSID 0 +#define MFIE_TYPE_RATES 1 +#define MFIE_TYPE_FH_SET 2 +#define MFIE_TYPE_DS_SET 3 +#define MFIE_TYPE_CF_SET 4 +#define MFIE_TYPE_TIM 5 +#define MFIE_TYPE_IBSS_SET 6 +#define MFIE_TYPE_COUNTRY 7 //+YJ,080625 +#define MFIE_TYPE_CHALLENGE 16 +#define MFIE_TYPE_ERP 42 +#define MFIE_TYPE_RSN 48 +#define MFIE_TYPE_RATES_EX 50 +#define MFIE_TYPE_GENERIC 221 + +#ifdef ENABLE_DOT11D +typedef enum +{ + COUNTRY_CODE_FCC = 0, + COUNTRY_CODE_IC = 1, + COUNTRY_CODE_ETSI = 2, + COUNTRY_CODE_SPAIN = 3, + COUNTRY_CODE_FRANCE = 4, + COUNTRY_CODE_MKK = 5, + COUNTRY_CODE_MKK1 = 6, + COUNTRY_CODE_ISRAEL = 7, + COUNTRY_CODE_TELEC = 8, + COUNTRY_CODE_GLOBAL_DOMAIN = 9, + COUNTRY_CODE_WORLD_WIDE_13_INDEX = 10 +}country_code_type_t; +#endif + +struct ieee80211_info_element_hdr { + u8 id; + u8 len; +} __attribute__ ((packed)); + +struct ieee80211_info_element { + u8 id; + u8 len; + u8 data[0]; +} __attribute__ ((packed)); + +/* + * These are the data types that can make up management packets + * + u16 auth_algorithm; + u16 auth_sequence; + u16 beacon_interval; + u16 capability; + u8 current_ap[ETH_ALEN]; + u16 listen_interval; + struct { + u16 association_id:14, reserved:2; + } __attribute__ ((packed)); + u32 time_stamp[2]; + u16 reason; + u16 status; +*/ + +#define IEEE80211_DEFAULT_TX_ESSID "Penguin" +#define IEEE80211_DEFAULT_BASIC_RATE 10 + +struct ieee80211_authentication { + struct ieee80211_header_data header; + u16 algorithm; + u16 transaction; + u16 status; + //struct ieee80211_info_element_hdr info_element; +} __attribute__ ((packed)); + + +struct ieee80211_probe_response { + struct ieee80211_header_data header; + u32 time_stamp[2]; + u16 beacon_interval; + u16 capability; + struct ieee80211_info_element info_element; +} __attribute__ ((packed)); + +struct ieee80211_probe_request { + struct ieee80211_header_data header; + /*struct ieee80211_info_element info_element;*/ +} __attribute__ ((packed)); + +struct ieee80211_assoc_request_frame { + struct ieee80211_hdr_3addr header; + u16 capability; + u16 listen_interval; + //u8 current_ap[ETH_ALEN]; + struct ieee80211_info_element_hdr info_element; +} __attribute__ ((packed)); + +struct ieee80211_assoc_response_frame { + struct ieee80211_hdr_3addr header; + u16 capability; + u16 status; + u16 aid; + struct ieee80211_info_element info_element; /* supported rates */ +} __attribute__ ((packed)); + +struct ieee80211_disassoc_frame{ + struct ieee80211_hdr_3addr header; + u16 reasoncode; +}__attribute__ ((packed)); + +struct ieee80211_txb { + u8 nr_frags; + u8 encrypted; + u16 reserved; + u16 frag_size; + u16 payload_size; + struct sk_buff *fragments[0]; +}; + +struct ieee80211_wmm_ac_param { + u8 ac_aci_acm_aifsn; + u8 ac_ecwmin_ecwmax; + u16 ac_txop_limit; +}; + +struct ieee80211_wmm_ts_info { + u8 ac_dir_tid; + u8 ac_up_psb; + u8 reserved; +} __attribute__ ((packed)); + +struct ieee80211_wmm_tspec_elem { + struct ieee80211_wmm_ts_info ts_info; + u16 norm_msdu_size; + u16 max_msdu_size; + u32 min_serv_inter; + u32 max_serv_inter; + u32 inact_inter; + u32 suspen_inter; + u32 serv_start_time; + u32 min_data_rate; + u32 mean_data_rate; + u32 peak_data_rate; + u32 max_burst_size; + u32 delay_bound; + u32 min_phy_rate; + u16 surp_band_allow; + u16 medium_time; +}__attribute__((packed)); + +enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame}; +#define MAX_SP_Len (WMM_all_frame << 4) +#define IEEE80211_QOS_TID 0x0f +#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5) + +/* SWEEP TABLE ENTRIES NUMBER*/ +#define MAX_SWEEP_TAB_ENTRIES 42 +#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 +/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs + * only use 8, and then use extended rates for the remaining supported + * rates. Other APs, however, stick all of their supported rates on the + * main rates information element... */ +#define MAX_RATES_LENGTH ((u8)12) +#define MAX_RATES_EX_LENGTH ((u8)16) +#define MAX_NETWORK_COUNT 128 +//#define MAX_CHANNEL_NUMBER 161 +#define MAX_CHANNEL_NUMBER 165 //YJ,modified,080625 +#define MAX_IE_LEN 0xFF //+YJ,080625 + +typedef struct _CHANNEL_LIST{ + u8 Channel[MAX_CHANNEL_NUMBER + 1]; + u8 Len; +}CHANNEL_LIST, *PCHANNEL_LIST; + +#define IEEE80211_SOFTMAC_SCAN_TIME 100//400 +//(HZ / 2) +//by amy for ps +#define IEEE80211_WATCH_DOG_TIME 2000 +//by amy for ps +//by amy for antenna +#define ANTENNA_DIVERSITY_TIMER_PERIOD 1000 // 1000 m +//by amy for antenna +#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2) + +#define CRC_LENGTH 4U + +#define MAX_WPA_IE_LEN 64 + +#define NETWORK_EMPTY_ESSID (1<<0) +#define NETWORK_HAS_OFDM (1<<1) +#define NETWORK_HAS_CCK (1<<2) + +#define IEEE80211_DTIM_MBCAST 4 +#define IEEE80211_DTIM_UCAST 2 +#define IEEE80211_DTIM_VALID 1 +#define IEEE80211_DTIM_INVALID 0 + +#define IEEE80211_PS_DISABLED 0 +#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST +#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST +#define IEEE80211_PS_ENABLE IEEE80211_DTIM_VALID +//added by David for QoS 2006/6/30 +//#define WMM_Hang_8187 +#ifdef WMM_Hang_8187 +#undef WMM_Hang_8187 +#endif + +#define WME_AC_BE 0x00 +#define WME_AC_BK 0x01 +#define WME_AC_VI 0x02 +#define WME_AC_VO 0x03 +#define WME_ACI_MASK 0x03 +#define WME_AIFSN_MASK 0x03 +#define WME_AC_PRAM_LEN 16 + +//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP +//#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1)) +#define UP2AC(up) ( \ + ((up) < 1) ? WME_AC_BE : \ + ((up) < 3) ? WME_AC_BK : \ + ((up) < 4) ? WME_AC_BE : \ + ((up) < 6) ? WME_AC_VI : \ + WME_AC_VO) +//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue +#define AC2UP(_ac) ( \ + ((_ac) == WME_AC_VO) ? 6 : \ + ((_ac) == WME_AC_VI) ? 5 : \ + ((_ac) == WME_AC_BK) ? 1 : \ + 0) + +#define ETHER_ADDR_LEN 6 /* length of an Ethernet address */ +struct ether_header { + u8 ether_dhost[ETHER_ADDR_LEN]; + u8 ether_shost[ETHER_ADDR_LEN]; + u16 ether_type; +} __attribute__((packed)); + +#ifndef ETHERTYPE_PAE +#define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */ +#endif +#ifndef ETHERTYPE_IP +#define ETHERTYPE_IP 0x0800 /* IP protocol */ +#endif + +struct ieee80211_network { + /* These entries are used to identify a unique network */ + u8 bssid[ETH_ALEN]; + u8 channel; + /* Ensure null-terminated for any debug msgs */ + u8 ssid[IW_ESSID_MAX_SIZE + 1]; + u8 ssid_len; + + /* These are network statistics */ + struct ieee80211_rx_stats stats; + u16 capability; + u8 rates[MAX_RATES_LENGTH]; + u8 rates_len; + u8 rates_ex[MAX_RATES_EX_LENGTH]; + u8 rates_ex_len; + unsigned long last_scanned; + u8 mode; + u8 flags; + u32 last_associate; + u32 time_stamp[2]; + u16 beacon_interval; + u16 listen_interval; + u16 atim_window; + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + u8 rsn_ie[MAX_WPA_IE_LEN]; + size_t rsn_ie_len; + u8 dtim_period; + u8 dtim_data; + u32 last_dtim_sta_time[2]; + struct list_head list; + //appeded for QoS + u8 wmm_info; + struct ieee80211_wmm_ac_param wmm_param[4]; + u8 QoS_Enable; + u8 SignalStrength; +//by amy 080312 + u8 HighestOperaRate; +//by amy 080312 +#ifdef THOMAS_TURBO + u8 Turbo_Enable;//enable turbo mode, added by thomas +#endif +#ifdef ENABLE_DOT11D + u16 CountryIeLen; + u8 CountryIeBuf[MAX_IE_LEN]; +#endif +}; + +enum ieee80211_state { + + /* the card is not linked at all */ + IEEE80211_NOLINK = 0, + + /* IEEE80211_ASSOCIATING* are for BSS client mode + * the driver shall not perform RX filtering unless + * the state is LINKED. + * The driver shall just check for the state LINKED and + * defaults to NOLINK for ALL the other states (including + * LINKED_SCANNING) + */ + + /* the association procedure will start (wq scheduling)*/ + IEEE80211_ASSOCIATING, + IEEE80211_ASSOCIATING_RETRY, + + /* the association procedure is sending AUTH request*/ + IEEE80211_ASSOCIATING_AUTHENTICATING, + + /* the association procedure has successfully authentcated + * and is sending association request + */ + IEEE80211_ASSOCIATING_AUTHENTICATED, + + /* the link is ok. the card associated to a BSS or linked + * to a ibss cell or acting as an AP and creating the bss + */ + IEEE80211_LINKED, + + /* same as LINKED, but the driver shall apply RX filter + * rules as we are in NO_LINK mode. As the card is still + * logically linked, but it is doing a syncro site survey + * then it will be back to LINKED state. + */ + IEEE80211_LINKED_SCANNING, + +}; + +#define DEFAULT_MAX_SCAN_AGE (15 * HZ) +#define DEFAULT_FTS 2346 +#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" +#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5] + + +#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11)) +extern inline int is_multicast_ether_addr(const u8 *addr) +{ + return ((addr[0] != 0xff) && (0x01 & addr[0])); +} +#endif + +#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)) +extern inline int is_broadcast_ether_addr(const u8 *addr) +{ + return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \ + (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff)); +} +#endif + +#define CFG_IEEE80211_RESERVE_FCS (1<<0) +#define CFG_IEEE80211_COMPUTE_FCS (1<<1) + +typedef struct tx_pending_t{ + int frag; + struct ieee80211_txb *txb; +}tx_pending_t; + + +struct ieee80211_device { + struct net_device *dev; + + /* Bookkeeping structures */ + struct net_device_stats stats; + struct ieee80211_stats ieee_stats; + struct ieee80211_softmac_stats softmac_stats; + + /* Probe / Beacon management */ + struct list_head network_free_list; + struct list_head network_list; + struct ieee80211_network *networks; + int scans; + int scan_age; + + int iw_mode; /* operating mode (IW_MODE_*) */ + + spinlock_t lock; + spinlock_t wpax_suitlist_lock; + + int tx_headroom; /* Set to size of any additional room needed at front + * of allocated Tx SKBs */ + u32 config; + + /* WEP and other encryption related settings at the device level */ + int open_wep; /* Set to 1 to allow unencrypted frames */ + + int reset_on_keychange; /* Set to 1 if the HW needs to be reset on + * WEP key changes */ + + /* If the host performs {en,de}cryption, then set to 1 */ + int host_encrypt; + int host_decrypt; + int ieee802_1x; /* is IEEE 802.1X used */ + + /* WPA data */ + int wpa_enabled; + int drop_unencrypted; + int tkip_countermeasures; + int privacy_invoked; + size_t wpa_ie_len; + u8 *wpa_ie; + + u8 ap_mac_addr[6]; + u16 pairwise_key_type; + u16 broadcast_key_type; + + struct list_head crypt_deinit_list; + struct ieee80211_crypt_data *crypt[WEP_KEYS]; + int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ + struct timer_list crypt_deinit_timer; + + int bcrx_sta_key; /* use individual keys to override default keys even + * with RX of broad/multicast frames */ + + /* Fragmentation structures */ + // each streaming contain a entry + struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN]; + unsigned int frag_next_idx[17]; + u16 fts; /* Fragmentation Threshold */ + + /* This stores infos for the current network. + * Either the network we are associated in INFRASTRUCTURE + * or the network that we are creating in MASTER mode. + * ad-hoc is a mixture ;-). + * Note that in infrastructure mode, even when not associated, + * fields bssid and essid may be valid (if wpa_set and essid_set + * are true) as thy carry the value set by the user via iwconfig + */ + struct ieee80211_network current_network; + + + enum ieee80211_state state; + + int short_slot; + int mode; /* A, B, G */ + int modulation; /* CCK, OFDM */ + int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ + int abg_true; /* ABG flag */ + + /* used for forcing the ibss workqueue to terminate + * without wait for the syncro scan to terminate + */ + short sync_scan_hurryup; + +#ifdef ENABLE_DOT11D + void * pDot11dInfo; + bool bGlobalDomain; + + // For Liteon Ch12~13 passive scan + u8 MinPassiveChnlNum; + u8 IbssStartChnl; +#else + /* map of allowed channels. 0 is dummy */ + // FIXME: remeber to default to a basic channel plan depending of the PHY type + int channel_map[MAX_CHANNEL_NUMBER+1]; +#endif + + int rate; /* current rate */ + int basic_rate; + //FIXME: pleace callback, see if redundant with softmac_features + short active_scan; + + /* this contains flags for selectively enable softmac support */ + u16 softmac_features; + + /* if the sequence control field is not filled by HW */ + u16 seq_ctrl[5]; + + /* association procedure transaction sequence number */ + u16 associate_seq; + + /* AID for RTXed association responses */ + u16 assoc_id; + + /* power save mode related*/ + short ps; + short sta_sleep; + int ps_timeout; + struct tasklet_struct ps_task; + u32 ps_th; + u32 ps_tl; + + short raw_tx; + /* used if IEEE_SOFTMAC_TX_QUEUE is set */ + short queue_stop; + short scanning; + short proto_started; + + struct semaphore wx_sem; + struct semaphore scan_sem; + + spinlock_t mgmt_tx_lock; + spinlock_t beacon_lock; + + short beacon_txing; + + short wap_set; + short ssid_set; + + u8 wpax_type_set; //{added by David, 2006.9.28} + u32 wpax_type_notify; //{added by David, 2006.9.26} + + /* QoS related flag */ + char init_wmmparam_flag; + + /* for discarding duplicated packets in IBSS */ + struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE]; + + /* for discarding duplicated packets in BSS */ + u16 last_rxseq_num[17]; /* rx seq previous per-tid */ + u16 last_rxfrag_num[17];/* tx frag previous per-tid */ + unsigned long last_packet_time[17]; + + /* for PS mode */ + unsigned long last_rx_ps_time; + + /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */ + struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM]; + int mgmt_queue_head; + int mgmt_queue_tail; + + + /* used if IEEE_SOFTMAC_TX_QUEUE is set */ + struct tx_pending_t tx_pending; + + /* used if IEEE_SOFTMAC_ASSOCIATE is set */ + struct timer_list associate_timer; + + /* used if IEEE_SOFTMAC_BEACONS is set */ + struct timer_list beacon_timer; + + struct work_struct associate_complete_wq; +// struct work_struct associate_retry_wq; + struct work_struct associate_procedure_wq; +// struct work_struct softmac_scan_wq; + struct work_struct wx_sync_scan_wq; + struct work_struct wmm_param_update_wq; + struct work_struct ps_request_tx_ack_wq;//for ps +// struct work_struct hw_wakeup_wq; +// struct work_struct hw_sleep_wq; +// struct work_struct watch_dog_wq; + bool bInactivePs; + bool actscanning; + bool beinretry; + u16 ListenInterval; + unsigned long NumRxDataInPeriod; //YJ,add,080828 + unsigned long NumRxBcnInPeriod; //YJ,add,080828 + unsigned long NumRxOkTotal; + unsigned long NumRxUnicast;//YJ,add,080828,for keep alive + bool bHwRadioOff; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct delayed_work softmac_scan_wq; + struct delayed_work associate_retry_wq; + struct delayed_work hw_wakeup_wq; + struct delayed_work hw_sleep_wq;//+by amy 080324 + struct delayed_work watch_dog_wq; + struct delayed_work sw_antenna_wq; + struct delayed_work start_ibss_wq; +//by amy for rate adaptive 080312 + struct delayed_work rate_adapter_wq; +//by amy for rate adaptive + struct delayed_work hw_dig_wq; + struct delayed_work tx_pw_wq; + +//Added for RF power on power off by lizhaoming 080512 + struct delayed_work GPIOChangeRFWorkItem; +#else + + struct work_struct start_ibss_wq; + struct work_struct softmac_scan_wq; + struct work_struct associate_retry_wq; + struct work_struct hw_wakeup_wq; + struct work_struct hw_sleep_wq; + struct work_struct watch_dog_wq; + struct work_struct sw_antenna_wq; +//by amy for rate adaptive 080312 + struct work_struct rate_adapter_wq; +//by amy for rate adaptive + struct work_struct hw_dig_wq; + struct work_struct tx_pw_wq; + +//Added for RF power on power off by lizhaoming 080512 + struct work_struct GPIOChangeRFWorkItem; +#endif + struct workqueue_struct *wq; + + /* Callback functions */ + void (*set_security)(struct net_device *dev, + struct ieee80211_security *sec); + + /* Used to TX data frame by using txb structs. + * this is not used if in the softmac_features + * is set the flag IEEE_SOFTMAC_TX_QUEUE + */ + int (*hard_start_xmit)(struct ieee80211_txb *txb, + struct net_device *dev); + + int (*reset_port)(struct net_device *dev); + + /* Softmac-generated frames (mamagement) are TXed via this + * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is + * not set. As some cards may have different HW queues that + * one might want to use for data and management frames + * the option to have two callbacks might be useful. + * This fucntion can't sleep. + */ + int (*softmac_hard_start_xmit)(struct sk_buff *skb, + struct net_device *dev); + + /* used instead of hard_start_xmit (not softmac_hard_start_xmit) + * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data + * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set + * then also management frames are sent via this callback. + * This function can't sleep. + */ + void (*softmac_data_hard_start_xmit)(struct sk_buff *skb, + struct net_device *dev,int rate); + + /* stops the HW queue for DATA frames. Useful to avoid + * waste time to TX data frame when we are reassociating + * This function can sleep. + */ + void (*data_hard_stop)(struct net_device *dev); + + /* OK this is complementar to data_poll_hard_stop */ + void (*data_hard_resume)(struct net_device *dev); + + /* ask to the driver to retune the radio . + * This function can sleep. the driver should ensure + * the radio has been swithced before return. + */ + void (*set_chan)(struct net_device *dev,short ch); + + /* These are not used if the ieee stack takes care of + * scanning (IEEE_SOFTMAC_SCAN feature set). + * In this case only the set_chan is used. + * + * The syncro version is similar to the start_scan but + * does not return until all channels has been scanned. + * this is called in user context and should sleep, + * it is called in a work_queue when swithcing to ad-hoc mode + * or in behalf of iwlist scan when the card is associated + * and root user ask for a scan. + * the fucntion stop_scan should stop both the syncro and + * background scanning and can sleep. + * The fucntion start_scan should initiate the background + * scanning and can't sleep. + */ + void (*scan_syncro)(struct net_device *dev); + void (*start_scan)(struct net_device *dev); + void (*stop_scan)(struct net_device *dev); + + /* indicate the driver that the link state is changed + * for example it may indicate the card is associated now. + * Driver might be interested in this to apply RX filter + * rules or simply light the LINK led + */ + void (*link_change)(struct net_device *dev); + + /* these two function indicates to the HW when to start + * and stop to send beacons. This is used when the + * IEEE_SOFTMAC_BEACONS is not set. For now the + * stop_send_bacons is NOT guaranteed to be called only + * after start_send_beacons. + */ + void (*start_send_beacons) (struct net_device *dev); + void (*stop_send_beacons) (struct net_device *dev); + + /* power save mode related */ + void (*sta_wake_up) (struct net_device *dev); + void (*ps_request_tx_ack) (struct net_device *dev); + void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl); + short (*ps_is_queue_empty) (struct net_device *dev); + + /* QoS related */ + //void (*wmm_param_update) (struct net_device *dev, u8 *ac_param); + //void (*wmm_param_update) (struct ieee80211_device *ieee); + + /* This must be the last item so that it points to the data + * allocated beyond this structure by alloc_ieee80211 */ + u8 priv[0]; +}; + +#define IEEE_A (1<<0) +#define IEEE_B (1<<1) +#define IEEE_G (1<<2) +#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) + +/* Generate a 802.11 header */ + +/* Uses the channel change callback directly + * instead of [start/stop] scan callbacks + */ +#define IEEE_SOFTMAC_SCAN (1<<2) + +/* Perform authentication and association handshake */ +#define IEEE_SOFTMAC_ASSOCIATE (1<<3) + +/* Generate probe requests */ +#define IEEE_SOFTMAC_PROBERQ (1<<4) + +/* Generate respones to probe requests */ +#define IEEE_SOFTMAC_PROBERS (1<<5) + +/* The ieee802.11 stack will manages the netif queue + * wake/stop for the driver, taking care of 802.11 + * fragmentation. See softmac.c for details. */ +#define IEEE_SOFTMAC_TX_QUEUE (1<<7) + +/* Uses only the softmac_data_hard_start_xmit + * even for TX management frames. + */ +#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8) + +/* Generate beacons. The stack will enqueue beacons + * to the card + */ +#define IEEE_SOFTMAC_BEACONS (1<<6) + + + +static inline void *ieee80211_priv(struct net_device *dev) +{ + return ((struct ieee80211_device *)netdev_priv(dev))->priv; +} + +extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) +{ + /* Single white space is for Linksys APs */ + if (essid_len == 1 && essid[0] == ' ') + return 1; + + /* Otherwise, if the entire essid is 0, we assume it is hidden */ + while (essid_len) { + essid_len--; + if (essid[essid_len] != '\0') + return 0; + } + + return 1; +} + +extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode) +{ + /* + * It is possible for both access points and our device to support + * combinations of modes, so as long as there is one valid combination + * of ap/device supported modes, then return success + * + */ + if ((mode & IEEE_A) && + (ieee->modulation & IEEE80211_OFDM_MODULATION) && + (ieee->freq_band & IEEE80211_52GHZ_BAND)) + return 1; + + if ((mode & IEEE_G) && + (ieee->modulation & IEEE80211_OFDM_MODULATION) && + (ieee->freq_band & IEEE80211_24GHZ_BAND)) + return 1; + + if ((mode & IEEE_B) && + (ieee->modulation & IEEE80211_CCK_MODULATION) && + (ieee->freq_band & IEEE80211_24GHZ_BAND)) + return 1; + + return 0; +} + +extern inline int ieee80211_get_hdrlen(u16 fc) +{ + int hdrlen = 24; + + switch (WLAN_FC_GET_TYPE(fc)) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) + hdrlen = 30; /* Addr4 */ + if(IEEE80211_QOS_HAS_SEQ(fc)) + hdrlen += 2; /* QOS ctrl*/ + break; + case IEEE80211_FTYPE_CTL: + switch (WLAN_FC_GET_STYPE(fc)) { + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + default: + hdrlen = 16; + break; + } + break; + } + + return hdrlen; +} + + + +/* ieee80211.c */ +extern void free_ieee80211(struct net_device *dev); +extern struct net_device *alloc_ieee80211(int sizeof_priv); + +extern int ieee80211_set_encryption(struct ieee80211_device *ieee); + +/* ieee80211_tx.c */ + +extern int ieee80211_encrypt_fragment( + struct ieee80211_device *ieee, + struct sk_buff *frag, + int hdr_len); + +extern int ieee80211_xmit(struct sk_buff *skb, + struct net_device *dev); +extern void ieee80211_txb_free(struct ieee80211_txb *); + + +/* ieee80211_rx.c */ +extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, + struct ieee80211_rx_stats *rx_stats); +extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, + struct ieee80211_hdr *header, + struct ieee80211_rx_stats *stats); + +/* ieee80211_wx.c */ +extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key); +extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key); +extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key); +extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data* wrqu, char *extra); +int ieee80211_wx_set_auth(struct ieee80211_device *ieee, + struct iw_request_info *info, + struct iw_param *data, char *extra); +int ieee80211_wx_set_mlme(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len); +/* ieee80211_softmac.c */ +extern short ieee80211_is_54g(struct ieee80211_network net); +extern short ieee80211_is_shortslot(struct ieee80211_network net); +extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, + struct ieee80211_rx_stats *rx_stats, u16 type, + u16 stype); +extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net); + +extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee); +extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee); +extern void ieee80211_start_bss(struct ieee80211_device *ieee); +extern void ieee80211_start_master_bss(struct ieee80211_device *ieee); +extern void ieee80211_start_ibss(struct ieee80211_device *ieee); +extern void ieee80211_softmac_init(struct ieee80211_device *ieee); +extern void ieee80211_softmac_free(struct ieee80211_device *ieee); +extern void ieee80211_associate_abort(struct ieee80211_device *ieee); +extern void ieee80211_disassociate(struct ieee80211_device *ieee); +extern void ieee80211_stop_scan(struct ieee80211_device *ieee); +extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee); +extern void ieee80211_check_all_nets(struct ieee80211_device *ieee); +extern void ieee80211_start_protocol(struct ieee80211_device *ieee); +extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); +extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); +extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); +extern void ieee80211_reset_queue(struct ieee80211_device *ieee); +extern void ieee80211_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); +extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); +extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); +extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p); +extern void notify_wx_assoc_event(struct ieee80211_device *ieee); +extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success); +extern void SendDisassociation(struct ieee80211_device *ieee,u8* asSta,u8 asRsn); +extern void ieee80211_start_scan(struct ieee80211_device *ieee); + +//Add for RF power on power off by lizhaoming 080512 +extern void SendDisassociation(struct ieee80211_device *ieee, + u8* asSta, + u8 asRsn); + +/* ieee80211_crypt_ccmp&tkip&wep.c */ +extern void ieee80211_tkip_null(void); +extern void ieee80211_wep_null(void); +extern void ieee80211_ccmp_null(void); +/* ieee80211_softmac_wx.c */ + +extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *ext); + +extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *awrq, + char *extra); + +extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b); + +extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a, + union iwreq_data *wrqu, char *b); + +extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a, + union iwreq_data *wrqu, char *b); + +extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee, + struct iw_request_info *a, + union iwreq_data *wrqu, char *extra); + +extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a, + union iwreq_data *wrqu, char *b); + +extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a, + union iwreq_data *wrqu, char *b); + +extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a, + union iwreq_data *wrqu, char *b); +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) +extern void ieee80211_wx_sync_scan_wq(struct work_struct *work); +#else + extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee); +#endif +//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee); + +extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +extern int ieee80211_wx_get_name(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +extern int ieee80211_wx_set_power(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +extern int ieee80211_wx_get_power(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +extern void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee); + +extern void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee, short pwr); + +extern const long ieee80211_wlan_frequencies[]; + +extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) +{ + ieee->scans++; +} + +extern inline int ieee80211_get_scans(struct ieee80211_device *ieee) +{ + return ieee->scans; +} + +static inline const char *escape_essid(const char *essid, u8 essid_len) { + static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; + const char *s = essid; + char *d = escaped; + + if (ieee80211_is_empty_essid(essid, essid_len)) { + memcpy(escaped, "<hidden>", sizeof("<hidden>")); + return escaped; + } + + essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE); + while (essid_len--) { + if (*s == '\0') { + *d++ = '\\'; + *d++ = '0'; + s++; + } else { + *d++ = *s++; + } + } + *d = '\0'; + return escaped; +} +#endif /* IEEE80211_H */ |