diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/hal/rtl8188e_mp.c')
| -rw-r--r-- | drivers/staging/rtl8188eu/hal/rtl8188e_mp.c | 40 |
1 files changed, 18 insertions, 22 deletions
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_mp.c b/drivers/staging/rtl8188eu/hal/rtl8188e_mp.c index e97ba02fa045..3d0e6c9e0310 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188e_mp.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_mp.c @@ -581,7 +581,7 @@ u8 Hal_ReadRFThermalMeter(struct adapter *pAdapter) void Hal_GetThermalMeter(struct adapter *pAdapter, u8 *value) { Hal_TriggerRFThermalMeter(pAdapter); - rtw_msleep_os(1000); + msleep(1000); *value = Hal_ReadRFThermalMeter(pAdapter); } @@ -614,7 +614,7 @@ void Hal_SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart) write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); - rtw_msleep_os(10); + msleep(10); /* BB Reset */ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); @@ -652,29 +652,27 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart) /* Start Single Tone. */ RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test start\n")); /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */ - if (IS_HARDWARE_TYPE_8188E(pAdapter)) { - reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); - reg58 &= 0xFFFFFFF0; - reg58 += 2; - PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); - } + reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); + reg58 &= 0xFFFFFFF0; + reg58 += 2; + PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0); PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0); if (is92C) { _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01); - rtw_usleep_os(100); + msleep(1); if (rfPath == RF_PATH_A) write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); /* PAD all on. */ else if (rfPath == RF_PATH_B) write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); /* PAD all on. */ write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */ - rtw_usleep_os(100); + msleep(1); } else { write_rfreg(pAdapter, rfPath, 0x21, 0xd4000); - rtw_usleep_os(100); + msleep(1); write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */ - rtw_usleep_os(100); + msleep(1); } /* for dynamic set Power index. */ @@ -687,24 +685,22 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart) /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */ /* <20120326, Kordan> Only in single tone mode. (asked by Edlu) */ - if (IS_HARDWARE_TYPE_8188E(pAdapter)) { - reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); - reg58 &= 0xFFFFFFF0; - PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); - } + reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); + reg58 &= 0xFFFFFFF0; + PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1); write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1); if (is92C) { _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00); - rtw_usleep_os(100); + msleep(1); write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); /* PAD all on. */ write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); /* PAD all on. */ - rtw_usleep_os(100); + msleep(1); } else { write_rfreg(pAdapter, rfPath, 0x21, 0x54000); - rtw_usleep_os(100); + msleep(1); write_rfreg(pAdapter, rfPath, 0x00, 0x30000); /* PAD all on. */ - rtw_usleep_os(100); + msleep(1); } /* Stop for dynamic set Power index. */ @@ -832,7 +828,7 @@ void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart) write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); /* Delay 10 ms */ - rtw_msleep_os(10); + msleep(10); /* BB Reset */ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); |