diff options
Diffstat (limited to 'drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h')
| -rw-r--r-- | drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h | 127 |
1 files changed, 5 insertions, 122 deletions
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h index a85036022aa8..7d54a7cd9514 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h @@ -8,20 +8,9 @@ //------------------------------------------------------------ // -// Operation mode value -// -#define HT_OPMODE_NO_PROTECT 0 -#define HT_OPMODE_OPTIONAL 1 -#define HT_OPMODE_40MHZ_PROTECT 2 -#define HT_OPMODE_MIXED 3 - -// // MIMO Power Save Settings // #define MIMO_PS_STATIC 0 -#define MIMO_PS_DYNAMIC 1 -#define MIMO_PS_NOLIMIT 3 - // // There should be 128 bits to cover all of the MCS rates. However, since @@ -35,45 +24,24 @@ #define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 #define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP - -typedef enum _HT_MCS_RATE { - HT_MCS0 = 0x00000001, - HT_MCS1 = 0x00000002, - HT_MCS2 = 0x00000004, - HT_MCS3 = 0x00000008, - HT_MCS4 = 0x00000010, - HT_MCS5 = 0x00000020, - HT_MCS6 = 0x00000040, - HT_MCS7 = 0x00000080, - HT_MCS8 = 0x00000100, - HT_MCS9 = 0x00000200, - HT_MCS10 = 0x00000400, - HT_MCS11 = 0x00000800, - HT_MCS12 = 0x00001000, - HT_MCS13 = 0x00002000, - HT_MCS14 = 0x00004000, - HT_MCS15 = 0x00008000, - // Do not define MCS32 here although 8190 support MCS32 -} HT_MCS_RATE, *PHT_MCS_RATE; - // // Represent Channel Width in HT Capabilities // -typedef enum _HT_CHANNEL_WIDTH { +enum ht_channel_width { HT_CHANNEL_WIDTH_20 = 0, HT_CHANNEL_WIDTH_20_40 = 1, -}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; +}; // // Represent Extension Channel Offset in HT Capabilities // This is available only in 40Mhz mode. // -typedef enum _HT_EXTCHNL_OFFSET { +enum ht_extension_chan_offset { HT_EXTCHNL_OFFSET_NO_EXT = 0, HT_EXTCHNL_OFFSET_UPPER = 1, HT_EXTCHNL_OFFSET_NO_DEF = 2, HT_EXTCHNL_OFFSET_LOWER = 3, -}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; +}; typedef enum _CHNLOP { CHNLOP_NONE = 0, // No Action now @@ -120,28 +88,6 @@ typedef union _HT_CAPABILITY_MACPARA{ }HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA; */ -typedef enum _HT_ACTION { - ACT_RECOMMAND_WIDTH = 0, - ACT_MIMO_PWR_SAVE = 1, - ACT_PSMP = 2, - ACT_SET_PCO_PHASE = 3, - ACT_MIMO_CHL_MEASURE = 4, - ACT_RECIPROCITY_CORRECT = 5, - ACT_MIMO_CSI_MATRICS = 6, - ACT_MIMO_NOCOMPR_STEER = 7, - ACT_MIMO_COMPR_STEER = 8, - ACT_ANTENNA_SELECT = 9, -} HT_ACTION, *PHT_ACTION; - - -/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */ -typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier { - SC_MODE_DUPLICATE = 0, - SC_MODE_LOWER = 1, - SC_MODE_UPPER = 2, - SC_MODE_FULL40MHZ = 3, -}HT_BW40_SC_E; - typedef struct _HT_CAPABILITY_ELE { //HT capability info @@ -212,16 +158,6 @@ typedef struct _HT_INFORMATION_ELE { u8 BasicMSC[16]; } __attribute__ ((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE; -// -// MIMO Power Save control field. -// This is appear in MIMO Power Save Action Frame -// -typedef struct _MIMOPS_CTRL { - u8 MimoPsEnable:1; - u8 MimoPsMode:1; - u8 Reserved:6; -} MIMOPS_CTRL, *PMIMOPS_CTRL; - typedef enum _HT_SPEC_VER { HT_SPEC_VER_IEEE = 0, HT_SPEC_VER_EWC = 1, @@ -301,7 +237,7 @@ typedef struct _RT_HIGH_THROUGHPUT { u8 PeerMimoPs; // 40MHz Channel Offset settings. - HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; + enum ht_extension_chan_offset CurSTAExtChnlOffset; u8 bCurTxBW40MHz; // If we use 40 MHz to Tx u8 PeerBandwidth; @@ -342,37 +278,6 @@ typedef struct _RT_HIGH_THROUGHPUT { u32 IOTAction; } __attribute__ ((packed)) RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; - -//------------------------------------------------------------ -// The Data structure is used to keep HT related variable for "each Sta" -// when card is configured as "AP mode" -//------------------------------------------------------------ - -typedef struct _RT_HTINFO_STA_ENTRY { - u8 bEnableHT; - - u8 bSupportCck; - - u16 AMSDU_MaxSize; - - u8 AMPDU_Factor; - u8 MPDU_Density; - - u8 HTHighestOperaRate; - - u8 bBw40MHz; - - u8 MimoPs; - - u8 McsRateSet[16]; - - -}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY; - - - - - //------------------------------------------------------------ // The Data structure is used to keep HT related variable for "each AP" // when card is configured as "STA mode" @@ -396,28 +301,6 @@ typedef struct _BSS_HT { u8 bdRT2RTLongSlotTime; } __attribute__ ((packed)) BSS_HT, *PBSS_HT; -typedef struct _MIMO_RSSI { - u32 EnableAntenna; - u32 AntennaA; - u32 AntennaB; - u32 AntennaC; - u32 AntennaD; - u32 Average; -}MIMO_RSSI, *PMIMO_RSSI; - -typedef struct _MIMO_EVM { - u32 EVM1; - u32 EVM2; -}MIMO_EVM, *PMIMO_EVM; - -typedef struct _FALSE_ALARM_STATISTICS { - u32 Cnt_Parity_Fail; - u32 Cnt_Rate_Illegal; - u32 Cnt_Crc8_fail; - u32 Cnt_all; -}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; - - extern u8 MCS_FILTER_ALL[16]; extern u8 MCS_FILTER_1SS[16]; |