diff options
Diffstat (limited to 'drivers/staging/vme/bridges')
| -rw-r--r-- | drivers/staging/vme/bridges/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/staging/vme/bridges/Makefile | 2 | ||||
| -rw-r--r-- | drivers/staging/vme/bridges/vme_ca91cx42.c | 1959 | ||||
| -rw-r--r-- | drivers/staging/vme/bridges/vme_ca91cx42.h | 583 | ||||
| -rw-r--r-- | drivers/staging/vme/bridges/vme_tsi148.c | 2660 | ||||
| -rw-r--r-- | drivers/staging/vme/bridges/vme_tsi148.h | 1409 |
6 files changed, 0 insertions, 6628 deletions
diff --git a/drivers/staging/vme/bridges/Kconfig b/drivers/staging/vme/bridges/Kconfig deleted file mode 100644 index 9331064e0476..000000000000 --- a/drivers/staging/vme/bridges/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -comment "VME Bridge Drivers" - -config VME_CA91CX42 - tristate "Universe II" - depends on VIRT_TO_BUS - help - If you say Y here you get support for the Tundra CA91C142 - (Universe II) VME bridge chip. - -config VME_TSI148 - tristate "Tempe" - depends on VIRT_TO_BUS - help - If you say Y here you get support for the Tundra TSI148 VME bridge - chip. diff --git a/drivers/staging/vme/bridges/Makefile b/drivers/staging/vme/bridges/Makefile deleted file mode 100644 index 59638afcd502..000000000000 --- a/drivers/staging/vme/bridges/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_VME_CA91CX42) += vme_ca91cx42.o -obj-$(CONFIG_VME_TSI148) += vme_tsi148.o diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c deleted file mode 100644 index 515b8b8e32a8..000000000000 --- a/drivers/staging/vme/bridges/vme_ca91cx42.c +++ /dev/null @@ -1,1959 +0,0 @@ -/* - * Support for the Tundra Universe I/II VME-PCI Bridge Chips - * - * Author: Martyn Welch <martyn.welch@ge.com> - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * Based on work by Tom Armistead and Ajit Prem - * Copyright 2004 Motorola Inc. - * - * Derived from ca91c042.c by Michael Wyrick - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/poll.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/time.h> -#include <linux/io.h> -#include <linux/uaccess.h> - -#include "../vme.h" -#include "../vme_bridge.h" -#include "vme_ca91cx42.h" - -static int __init ca91cx42_init(void); -static int ca91cx42_probe(struct pci_dev *, const struct pci_device_id *); -static void ca91cx42_remove(struct pci_dev *); -static void __exit ca91cx42_exit(void); - -/* Module parameters */ -static int geoid; - -static const char driver_name[] = "vme_ca91cx42"; - -static DEFINE_PCI_DEVICE_TABLE(ca91cx42_ids) = { - { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_CA91C142) }, - { }, -}; - -static struct pci_driver ca91cx42_driver = { - .name = driver_name, - .id_table = ca91cx42_ids, - .probe = ca91cx42_probe, - .remove = ca91cx42_remove, -}; - -static u32 ca91cx42_DMA_irqhandler(struct ca91cx42_driver *bridge) -{ - wake_up(&bridge->dma_queue); - - return CA91CX42_LINT_DMA; -} - -static u32 ca91cx42_LM_irqhandler(struct ca91cx42_driver *bridge, u32 stat) -{ - int i; - u32 serviced = 0; - - for (i = 0; i < 4; i++) { - if (stat & CA91CX42_LINT_LM[i]) { - /* We only enable interrupts if the callback is set */ - bridge->lm_callback[i](i); - serviced |= CA91CX42_LINT_LM[i]; - } - } - - return serviced; -} - -/* XXX This needs to be split into 4 queues */ -static u32 ca91cx42_MB_irqhandler(struct ca91cx42_driver *bridge, int mbox_mask) -{ - wake_up(&bridge->mbox_queue); - - return CA91CX42_LINT_MBOX; -} - -static u32 ca91cx42_IACK_irqhandler(struct ca91cx42_driver *bridge) -{ - wake_up(&bridge->iack_queue); - - return CA91CX42_LINT_SW_IACK; -} - -static u32 ca91cx42_VERR_irqhandler(struct vme_bridge *ca91cx42_bridge) -{ - int val; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - val = ioread32(bridge->base + DGCS); - - if (!(val & 0x00000800)) { - dev_err(ca91cx42_bridge->parent, "ca91cx42_VERR_irqhandler DMA " - "Read Error DGCS=%08X\n", val); - } - - return CA91CX42_LINT_VERR; -} - -static u32 ca91cx42_LERR_irqhandler(struct vme_bridge *ca91cx42_bridge) -{ - int val; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - val = ioread32(bridge->base + DGCS); - - if (!(val & 0x00000800)) - dev_err(ca91cx42_bridge->parent, "ca91cx42_LERR_irqhandler DMA " - "Read Error DGCS=%08X\n", val); - - return CA91CX42_LINT_LERR; -} - - -static u32 ca91cx42_VIRQ_irqhandler(struct vme_bridge *ca91cx42_bridge, - int stat) -{ - int vec, i, serviced = 0; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - - for (i = 7; i > 0; i--) { - if (stat & (1 << i)) { - vec = ioread32(bridge->base + - CA91CX42_V_STATID[i]) & 0xff; - - vme_irq_handler(ca91cx42_bridge, i, vec); - - serviced |= (1 << i); - } - } - - return serviced; -} - -static irqreturn_t ca91cx42_irqhandler(int irq, void *ptr) -{ - u32 stat, enable, serviced = 0; - struct vme_bridge *ca91cx42_bridge; - struct ca91cx42_driver *bridge; - - ca91cx42_bridge = ptr; - - bridge = ca91cx42_bridge->driver_priv; - - enable = ioread32(bridge->base + LINT_EN); - stat = ioread32(bridge->base + LINT_STAT); - - /* Only look at unmasked interrupts */ - stat &= enable; - - if (unlikely(!stat)) - return IRQ_NONE; - - if (stat & CA91CX42_LINT_DMA) - serviced |= ca91cx42_DMA_irqhandler(bridge); - if (stat & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 | - CA91CX42_LINT_LM3)) - serviced |= ca91cx42_LM_irqhandler(bridge, stat); - if (stat & CA91CX42_LINT_MBOX) - serviced |= ca91cx42_MB_irqhandler(bridge, stat); - if (stat & CA91CX42_LINT_SW_IACK) - serviced |= ca91cx42_IACK_irqhandler(bridge); - if (stat & CA91CX42_LINT_VERR) - serviced |= ca91cx42_VERR_irqhandler(ca91cx42_bridge); - if (stat & CA91CX42_LINT_LERR) - serviced |= ca91cx42_LERR_irqhandler(ca91cx42_bridge); - if (stat & (CA91CX42_LINT_VIRQ1 | CA91CX42_LINT_VIRQ2 | - CA91CX42_LINT_VIRQ3 | CA91CX42_LINT_VIRQ4 | - CA91CX42_LINT_VIRQ5 | CA91CX42_LINT_VIRQ6 | - CA91CX42_LINT_VIRQ7)) - serviced |= ca91cx42_VIRQ_irqhandler(ca91cx42_bridge, stat); - - /* Clear serviced interrupts */ - iowrite32(serviced, bridge->base + LINT_STAT); - - return IRQ_HANDLED; -} - -static int ca91cx42_irq_init(struct vme_bridge *ca91cx42_bridge) -{ - int result, tmp; - struct pci_dev *pdev; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - /* Need pdev */ - pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); - - /* Initialise list for VME bus errors */ - INIT_LIST_HEAD(&ca91cx42_bridge->vme_errors); - - mutex_init(&ca91cx42_bridge->irq_mtx); - - /* Disable interrupts from PCI to VME */ - iowrite32(0, bridge->base + VINT_EN); - - /* Disable PCI interrupts */ - iowrite32(0, bridge->base + LINT_EN); - /* Clear Any Pending PCI Interrupts */ - iowrite32(0x00FFFFFF, bridge->base + LINT_STAT); - - result = request_irq(pdev->irq, ca91cx42_irqhandler, IRQF_SHARED, - driver_name, ca91cx42_bridge); - if (result) { - dev_err(&pdev->dev, "Can't get assigned pci irq vector %02X\n", - pdev->irq); - return result; - } - - /* Ensure all interrupts are mapped to PCI Interrupt 0 */ - iowrite32(0, bridge->base + LINT_MAP0); - iowrite32(0, bridge->base + LINT_MAP1); - iowrite32(0, bridge->base + LINT_MAP2); - - /* Enable DMA, mailbox & LM Interrupts */ - tmp = CA91CX42_LINT_MBOX3 | CA91CX42_LINT_MBOX2 | CA91CX42_LINT_MBOX1 | - CA91CX42_LINT_MBOX0 | CA91CX42_LINT_SW_IACK | - CA91CX42_LINT_VERR | CA91CX42_LINT_LERR | CA91CX42_LINT_DMA; - - iowrite32(tmp, bridge->base + LINT_EN); - - return 0; -} - -static void ca91cx42_irq_exit(struct ca91cx42_driver *bridge, - struct pci_dev *pdev) -{ - /* Disable interrupts from PCI to VME */ - iowrite32(0, bridge->base + VINT_EN); - - /* Disable PCI interrupts */ - iowrite32(0, bridge->base + LINT_EN); - /* Clear Any Pending PCI Interrupts */ - iowrite32(0x00FFFFFF, bridge->base + LINT_STAT); - - free_irq(pdev->irq, pdev); -} - -static int ca91cx42_iack_received(struct ca91cx42_driver *bridge, int level) -{ - u32 tmp; - - tmp = ioread32(bridge->base + LINT_STAT); - - if (tmp & (1 << level)) - return 0; - else - return 1; -} - -/* - * Set up an VME interrupt - */ -static void ca91cx42_irq_set(struct vme_bridge *ca91cx42_bridge, int level, - int state, int sync) - -{ - struct pci_dev *pdev; - u32 tmp; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - /* Enable IRQ level */ - tmp = ioread32(bridge->base + LINT_EN); - - if (state == 0) - tmp &= ~CA91CX42_LINT_VIRQ[level]; - else - tmp |= CA91CX42_LINT_VIRQ[level]; - - iowrite32(tmp, bridge->base + LINT_EN); - - if ((state == 0) && (sync != 0)) { - pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, - dev); - - synchronize_irq(pdev->irq); - } -} - -static int ca91cx42_irq_generate(struct vme_bridge *ca91cx42_bridge, int level, - int statid) -{ - u32 tmp; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - /* Universe can only generate even vectors */ - if (statid & 1) - return -EINVAL; - - mutex_lock(&bridge->vme_int); - - tmp = ioread32(bridge->base + VINT_EN); - - /* Set Status/ID */ - iowrite32(statid << 24, bridge->base + STATID); - - /* Assert VMEbus IRQ */ - tmp = tmp | (1 << (level + 24)); - iowrite32(tmp, bridge->base + VINT_EN); - - /* Wait for IACK */ - wait_event_interruptible(bridge->iack_queue, - ca91cx42_iack_received(bridge, level)); - - /* Return interrupt to low state */ - tmp = ioread32(bridge->base + VINT_EN); - tmp = tmp & ~(1 << (level + 24)); - iowrite32(tmp, bridge->base + VINT_EN); - - mutex_unlock(&bridge->vme_int); - - return 0; -} - -static int ca91cx42_slave_set(struct vme_slave_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, - dma_addr_t pci_base, u32 aspace, u32 cycle) -{ - unsigned int i, addr = 0, granularity; - unsigned int temp_ctl = 0; - unsigned int vme_bound, pci_offset; - struct vme_bridge *ca91cx42_bridge; - struct ca91cx42_driver *bridge; - - ca91cx42_bridge = image->parent; - - bridge = ca91cx42_bridge->driver_priv; - - i = image->number; - - switch (aspace) { - case VME_A16: - addr |= CA91CX42_VSI_CTL_VAS_A16; - break; - case VME_A24: - addr |= CA91CX42_VSI_CTL_VAS_A24; - break; - case VME_A32: - addr |= CA91CX42_VSI_CTL_VAS_A32; - break; - case VME_USER1: - addr |= CA91CX42_VSI_CTL_VAS_USER1; - break; - case VME_USER2: - addr |= CA91CX42_VSI_CTL_VAS_USER2; - break; - case VME_A64: - case VME_CRCSR: - case VME_USER3: - case VME_USER4: - default: - dev_err(ca91cx42_bridge->parent, "Invalid address space\n"); - return -EINVAL; - break; - } - - /* - * Bound address is a valid address for the window, adjust - * accordingly - */ - vme_bound = vme_base + size; - pci_offset = pci_base - vme_base; - - if ((i == 0) || (i == 4)) - granularity = 0x1000; - else - granularity = 0x10000; - - if (vme_base & (granularity - 1)) { - dev_err(ca91cx42_bridge->parent, "Invalid VME base " - "alignment\n"); - return -EINVAL; - } - if (vme_bound & (granularity - 1)) { - dev_err(ca91cx42_bridge->parent, "Invalid VME bound " - "alignment\n"); - return -EINVAL; - } - if (pci_offset & (granularity - 1)) { - dev_err(ca91cx42_bridge->parent, "Invalid PCI Offset " - "alignment\n"); - return -EINVAL; - } - - /* Disable while we are mucking around */ - temp_ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]); - temp_ctl &= ~CA91CX42_VSI_CTL_EN; - iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); - - /* Setup mapping */ - iowrite32(vme_base, bridge->base + CA91CX42_VSI_BS[i]); - iowrite32(vme_bound, bridge->base + CA91CX42_VSI_BD[i]); - iowrite32(pci_offset, bridge->base + CA91CX42_VSI_TO[i]); - - /* Setup address space */ - temp_ctl &= ~CA91CX42_VSI_CTL_VAS_M; - temp_ctl |= addr; - - /* Setup cycle types */ - temp_ctl &= ~(CA91CX42_VSI_CTL_PGM_M | CA91CX42_VSI_CTL_SUPER_M); - if (cycle & VME_SUPER) - temp_ctl |= CA91CX42_VSI_CTL_SUPER_SUPR; - if (cycle & VME_USER) - temp_ctl |= CA91CX42_VSI_CTL_SUPER_NPRIV; - if (cycle & VME_PROG) - temp_ctl |= CA91CX42_VSI_CTL_PGM_PGM; - if (cycle & VME_DATA) - temp_ctl |= CA91CX42_VSI_CTL_PGM_DATA; - - /* Write ctl reg without enable */ - iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); - - if (enabled) - temp_ctl |= CA91CX42_VSI_CTL_EN; - - iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); - - return 0; -} - -static int ca91cx42_slave_get(struct vme_slave_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, - dma_addr_t *pci_base, u32 *aspace, u32 *cycle) -{ - unsigned int i, granularity = 0, ctl = 0; - unsigned long long vme_bound, pci_offset; - struct ca91cx42_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - if ((i == 0) || (i == 4)) - granularity = 0x1000; - else - granularity = 0x10000; - - /* Read Registers */ - ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]); - - *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); - vme_bound = ioread32(bridge->base + CA91CX42_VSI_BD[i]); - pci_offset = ioread32(bridge->base + CA91CX42_VSI_TO[i]); - - *pci_base = (dma_addr_t)vme_base + pci_offset; - *size = (unsigned long long)((vme_bound - *vme_base) + granularity); - - *enabled = 0; - *aspace = 0; - *cycle = 0; - - if (ctl & CA91CX42_VSI_CTL_EN) - *enabled = 1; - - if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A16) - *aspace = VME_A16; - if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A24) - *aspace = VME_A24; - if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A32) - *aspace = VME_A32; - if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER1) - *aspace = VME_USER1; - if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER2) - *aspace = VME_USER2; - - if (ctl & CA91CX42_VSI_CTL_SUPER_SUPR) - *cycle |= VME_SUPER; - if (ctl & CA91CX42_VSI_CTL_SUPER_NPRIV) - *cycle |= VME_USER; - if (ctl & CA91CX42_VSI_CTL_PGM_PGM) - *cycle |= VME_PROG; - if (ctl & CA91CX42_VSI_CTL_PGM_DATA) - *cycle |= VME_DATA; - - return 0; -} - -/* - * Allocate and map PCI Resource - */ -static int ca91cx42_alloc_resource(struct vme_master_resource *image, - unsigned long long size) -{ - unsigned long long existing_size; - int retval = 0; - struct pci_dev *pdev; - struct vme_bridge *ca91cx42_bridge; - - ca91cx42_bridge = image->parent; - - /* Find pci_dev container of dev */ - if (ca91cx42_bridge->parent == NULL) { - dev_err(ca91cx42_bridge->parent, "Dev entry NULL\n"); - return -EINVAL; - } - pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); - - existing_size = (unsigned long long)(image->bus_resource.end - - image->bus_resource.start); - - /* If the existing size is OK, return */ - if (existing_size == (size - 1)) - return 0; - - if (existing_size != 0) { - iounmap(image->kern_base); - image->kern_base = NULL; - kfree(image->bus_resource.name); - release_resource(&image->bus_resource); - memset(&image->bus_resource, 0, sizeof(struct resource)); - } - - if (image->bus_resource.name == NULL) { - image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC); - if (image->bus_resource.name == NULL) { - dev_err(ca91cx42_bridge->parent, "Unable to allocate " - "memory for resource name\n"); - retval = -ENOMEM; - goto err_name; - } - } - - sprintf((char *)image->bus_resource.name, "%s.%d", - ca91cx42_bridge->name, image->number); - - image->bus_resource.start = 0; - image->bus_resource.end = (unsigned long)size; - image->bus_resource.flags = IORESOURCE_MEM; - - retval = pci_bus_alloc_resource(pdev->bus, - &image->bus_resource, size, size, PCIBIOS_MIN_MEM, - 0, NULL, NULL); - if (retval) { - dev_err(ca91cx42_bridge->parent, "Failed to allocate mem " - "resource for window %d size 0x%lx start 0x%lx\n", - image->number, (unsigned long)size, - (unsigned long)image->bus_resource.start); - goto err_resource; - } - - image->kern_base = ioremap_nocache( - image->bus_resource.start, size); - if (image->kern_base == NULL) { - dev_err(ca91cx42_bridge->parent, "Failed to remap resource\n"); - retval = -ENOMEM; - goto err_remap; - } - - return 0; - -err_remap: - release_resource(&image->bus_resource); -err_resource: - kfree(image->bus_resource.name); - memset(&image->bus_resource, 0, sizeof(struct resource)); -err_name: - return retval; -} - -/* - * Free and unmap PCI Resource - */ -static void ca91cx42_free_resource(struct vme_master_resource *image) -{ - iounmap(image->kern_base); - image->kern_base = NULL; - release_resource(&image->bus_resource); - kfree(image->bus_resource.name); - memset(&image->bus_resource, 0, sizeof(struct resource)); -} - - -static int ca91cx42_master_set(struct vme_master_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, u32 aspace, - u32 cycle, u32 dwidth) -{ - int retval = 0; - unsigned int i, granularity = 0; - unsigned int temp_ctl = 0; - unsigned long long pci_bound, vme_offset, pci_base; - struct vme_bridge *ca91cx42_bridge; - struct ca91cx42_driver *bridge; - - ca91cx42_bridge = image->parent; - - bridge = ca91cx42_bridge->driver_priv; - - i = image->number; - - if ((i == 0) || (i == 4)) - granularity = 0x1000; - else - granularity = 0x10000; - - /* Verify input data */ - if (vme_base & (granularity - 1)) { - dev_err(ca91cx42_bridge->parent, "Invalid VME Window " - "alignment\n"); - retval = -EINVAL; - goto err_window; - } - if (size & (granularity - 1)) { - dev_err(ca91cx42_bridge->parent, "Invalid VME Window " - "alignment\n"); - retval = -EINVAL; - goto err_window; - } - - spin_lock(&image->lock); - - /* - * Let's allocate the resource here rather than further up the stack as - * it avoids pushing loads of bus dependent stuff up the stack - */ - retval = ca91cx42_alloc_resource(image, size); - if (retval) { - spin_unlock(&image->lock); - dev_err(ca91cx42_bridge->parent, "Unable to allocate memory " - "for resource name\n"); - retval = -ENOMEM; - goto err_res; - } - - pci_base = (unsigned long long)image->bus_resource.start; - - /* - * Bound address is a valid address for the window, adjust - * according to window granularity. - */ - pci_bound = pci_base + size; - vme_offset = vme_base - pci_base; - - /* Disable while we are mucking around */ - temp_ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]); - temp_ctl &= ~CA91CX42_LSI_CTL_EN; - iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); - - /* Setup cycle types */ - temp_ctl &= ~CA91CX42_LSI_CTL_VCT_M; - if (cycle & VME_BLT) - temp_ctl |= CA91CX42_LSI_CTL_VCT_BLT; - if (cycle & VME_MBLT) - temp_ctl |= CA91CX42_LSI_CTL_VCT_MBLT; - - /* Setup data width */ - temp_ctl &= ~CA91CX42_LSI_CTL_VDW_M; - switch (dwidth) { - case VME_D8: - temp_ctl |= CA91CX42_LSI_CTL_VDW_D8; - break; - case VME_D16: - temp_ctl |= CA91CX42_LSI_CTL_VDW_D16; - break; - case VME_D32: - temp_ctl |= CA91CX42_LSI_CTL_VDW_D32; - break; - case VME_D64: - temp_ctl |= CA91CX42_LSI_CTL_VDW_D64; - break; - default: - spin_unlock(&image->lock); - dev_err(ca91cx42_bridge->parent, "Invalid data width\n"); - retval = -EINVAL; - goto err_dwidth; - break; - } - - /* Setup address space */ - temp_ctl &= ~CA91CX42_LSI_CTL_VAS_M; - switch (aspace) { - case VME_A16: - temp_ctl |= CA91CX42_LSI_CTL_VAS_A16; - break; - case VME_A24: - temp_ctl |= CA91CX42_LSI_CTL_VAS_A24; - break; - case VME_A32: - temp_ctl |= CA91CX42_LSI_CTL_VAS_A32; - break; - case VME_CRCSR: - temp_ctl |= CA91CX42_LSI_CTL_VAS_CRCSR; - break; - case VME_USER1: - temp_ctl |= CA91CX42_LSI_CTL_VAS_USER1; - break; - case VME_USER2: - temp_ctl |= CA91CX42_LSI_CTL_VAS_USER2; - break; - case VME_A64: - case VME_USER3: - case VME_USER4: - default: - spin_unlock(&image->lock); - dev_err(ca91cx42_bridge->parent, "Invalid address space\n"); - retval = -EINVAL; - goto err_aspace; - break; - } - - temp_ctl &= ~(CA91CX42_LSI_CTL_PGM_M | CA91CX42_LSI_CTL_SUPER_M); - if (cycle & VME_SUPER) - temp_ctl |= CA91CX42_LSI_CTL_SUPER_SUPR; - if (cycle & VME_PROG) - temp_ctl |= CA91CX42_LSI_CTL_PGM_PGM; - - /* Setup mapping */ - iowrite32(pci_base, bridge->base + CA91CX42_LSI_BS[i]); - iowrite32(pci_bound, bridge->base + CA91CX42_LSI_BD[i]); - iowrite32(vme_offset, bridge->base + CA91CX42_LSI_TO[i]); - - /* Write ctl reg without enable */ - iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); - - if (enabled) - temp_ctl |= CA91CX42_LSI_CTL_EN; - - iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); - - spin_unlock(&image->lock); - return 0; - -err_aspace: -err_dwidth: - ca91cx42_free_resource(image); -err_res: -err_window: - return retval; -} - -static int __ca91cx42_master_get(struct vme_master_resource *image, - int *enabled, unsigned long long *vme_base, unsigned long long *size, - u32 *aspace, u32 *cycle, u32 *dwidth) -{ - unsigned int i, ctl; - unsigned long long pci_base, pci_bound, vme_offset; - struct ca91cx42_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]); - - pci_base = ioread32(bridge->base + CA91CX42_LSI_BS[i]); - vme_offset = ioread32(bridge->base + CA91CX42_LSI_TO[i]); - pci_bound = ioread32(bridge->base + CA91CX42_LSI_BD[i]); - - *vme_base = pci_base + vme_offset; - *size = (unsigned long long)(pci_bound - pci_base); - - *enabled = 0; - *aspace = 0; - *cycle = 0; - *dwidth = 0; - - if (ctl & CA91CX42_LSI_CTL_EN) - *enabled = 1; - - /* Setup address space */ - switch (ctl & CA91CX42_LSI_CTL_VAS_M) { - case CA91CX42_LSI_CTL_VAS_A16: - *aspace = VME_A16; - break; - case CA91CX42_LSI_CTL_VAS_A24: - *aspace = VME_A24; - break; - case CA91CX42_LSI_CTL_VAS_A32: - *aspace = VME_A32; - break; - case CA91CX42_LSI_CTL_VAS_CRCSR: - *aspace = VME_CRCSR; - break; - case CA91CX42_LSI_CTL_VAS_USER1: - *aspace = VME_USER1; - break; - case CA91CX42_LSI_CTL_VAS_USER2: - *aspace = VME_USER2; - break; - } - - /* XXX Not sure howto check for MBLT */ - /* Setup cycle types */ - if (ctl & CA91CX42_LSI_CTL_VCT_BLT) - *cycle |= VME_BLT; - else - *cycle |= VME_SCT; - - if (ctl & CA91CX42_LSI_CTL_SUPER_SUPR) - *cycle |= VME_SUPER; - else - *cycle |= VME_USER; - - if (ctl & CA91CX42_LSI_CTL_PGM_PGM) - *cycle = VME_PROG; - else - *cycle = VME_DATA; - - /* Setup data width */ - switch (ctl & CA91CX42_LSI_CTL_VDW_M) { - case CA91CX42_LSI_CTL_VDW_D8: - *dwidth = VME_D8; - break; - case CA91CX42_LSI_CTL_VDW_D16: - *dwidth = VME_D16; - break; - case CA91CX42_LSI_CTL_VDW_D32: - *dwidth = VME_D32; - break; - case CA91CX42_LSI_CTL_VDW_D64: - *dwidth = VME_D64; - break; - } - - return 0; -} - -static int ca91cx42_master_get(struct vme_master_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, u32 *aspace, - u32 *cycle, u32 *dwidth) -{ - int retval; - - spin_lock(&image->lock); - - retval = __ca91cx42_master_get(image, enabled, vme_base, size, aspace, - cycle, dwidth); - - spin_unlock(&image->lock); - - return retval; -} - -static ssize_t ca91cx42_master_read(struct vme_master_resource *image, - void *buf, size_t count, loff_t offset) -{ - ssize_t retval; - void *addr = image->kern_base + offset; - unsigned int done = 0; - unsigned int count32; - - if (count == 0) - return 0; - - spin_lock(&image->lock); - - /* The following code handles VME address alignment problem - * in order to assure the maximal data width cycle. - * We cannot use memcpy_xxx directly here because it - * may cut data transfer in 8-bits cycles, thus making - * D16 cycle impossible. - * From the other hand, the bridge itself assures that - * maximal configured data cycle is used and splits it - * automatically for non-aligned addresses. - */ - if ((uintptr_t)addr & 0x1) { - *(u8 *)buf = ioread8(addr); - done += 1; - if (done == count) - goto out; - } - if ((uintptr_t)addr & 0x2) { - if ((count - done) < 2) { - *(u8 *)(buf + done) = ioread8(addr + done); - done += 1; - goto out; - } else { - *(u16 *)(buf + done) = ioread16(addr + done); - done += 2; - } - } - - count32 = (count - done) & ~0x3; - if (count32 > 0) { - memcpy_fromio(buf + done, addr + done, (unsigned int)count); - done += count32; - } - - if ((count - done) & 0x2) { - *(u16 *)(buf + done) = ioread16(addr + done); - done += 2; - } - if ((count - done) & 0x1) { - *(u8 *)(buf + done) = ioread8(addr + done); - done += 1; - } -out: - retval = count; - spin_unlock(&image->lock); - - return retval; -} - -static ssize_t ca91cx42_master_write(struct vme_master_resource *image, - void *buf, size_t count, loff_t offset) -{ - ssize_t retval; - void *addr = image->kern_base + offset; - unsigned int done = 0; - unsigned int count32; - - if (count == 0) - return 0; - - spin_lock(&image->lock); - - /* Here we apply for the same strategy we do in master_read - * function in order to assure D16 cycle when required. - */ - if ((uintptr_t)addr & 0x1) { - iowrite8(*(u8 *)buf, addr); - done += 1; - if (done == count) - goto out; - } - if ((uintptr_t)addr & 0x2) { - if ((count - done) < 2) { - iowrite8(*(u8 *)(buf + done), addr + done); - done += 1; - goto out; - } else { - iowrite16(*(u16 *)(buf + done), addr + done); - done += 2; - } - } - - count32 = (count - done) & ~0x3; - if (count32 > 0) { - memcpy_toio(addr + done, buf + done, count32); - done += count32; - } - - if ((count - done) & 0x2) { - iowrite16(*(u16 *)(buf + done), addr + done); - done += 2; - } - if ((count - done) & 0x1) { - iowrite8(*(u8 *)(buf + done), addr + done); - done += 1; - } -out: - retval = count; - - spin_unlock(&image->lock); - - return retval; -} - -static unsigned int ca91cx42_master_rmw(struct vme_master_resource *image, - unsigned int mask, unsigned int compare, unsigned int swap, - loff_t offset) -{ - u32 result; - uintptr_t pci_addr; - int i; - struct ca91cx42_driver *bridge; - struct device *dev; - - bridge = image->parent->driver_priv; - dev = image->parent->parent; - - /* Find the PCI address that maps to the desired VME address */ - i = image->number; - - /* Locking as we can only do one of these at a time */ - mutex_lock(&bridge->vme_rmw); - - /* Lock image */ - spin_lock(&image->lock); - - pci_addr = (uintptr_t)image->kern_base + offset; - - /* Address must be 4-byte aligned */ - if (pci_addr & 0x3) { - dev_err(dev, "RMW Address not 4-byte aligned\n"); - result = -EINVAL; - goto out; - } - - /* Ensure RMW Disabled whilst configuring */ - iowrite32(0, bridge->base + SCYC_CTL); - - /* Configure registers */ - iowrite32(mask, bridge->base + SCYC_EN); - iowrite32(compare, bridge->base + SCYC_CMP); - iowrite32(swap, bridge->base + SCYC_SWP); - iowrite32(pci_addr, bridge->base + SCYC_ADDR); - - /* Enable RMW */ - iowrite32(CA91CX42_SCYC_CTL_CYC_RMW, bridge->base + SCYC_CTL); - - /* Kick process off with a read to the required address. */ - result = ioread32(image->kern_base + offset); - - /* Disable RMW */ - iowrite32(0, bridge->base + SCYC_CTL); - -out: - spin_unlock(&image->lock); - - mutex_unlock(&bridge->vme_rmw); - - return result; -} - -static int ca91cx42_dma_list_add(struct vme_dma_list *list, - struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) -{ - struct ca91cx42_dma_entry *entry, *prev; - struct vme_dma_pci *pci_attr; - struct vme_dma_vme *vme_attr; - dma_addr_t desc_ptr; - int retval = 0; - struct device *dev; - - dev = list->parent->parent->parent; - - /* XXX descriptor must be aligned on 64-bit boundaries */ - entry = kmalloc(sizeof(struct ca91cx42_dma_entry), GFP_KERNEL); - if (entry == NULL) { - dev_err(dev, "Failed to allocate memory for dma resource " - "structure\n"); - retval = -ENOMEM; - goto err_mem; - } - - /* Test descriptor alignment */ - if ((unsigned long)&entry->descriptor & CA91CX42_DCPP_M) { - dev_err(dev, "Descriptor not aligned to 16 byte boundary as " - "required: %p\n", &entry->descriptor); - retval = -EINVAL; - goto err_align; - } - - memset(&entry->descriptor, 0, sizeof(struct ca91cx42_dma_descriptor)); - - if (dest->type == VME_DMA_VME) { - entry->descriptor.dctl |= CA91CX42_DCTL_L2V; - vme_attr = dest->private; - pci_attr = src->private; - } else { - vme_attr = src->private; - pci_attr = dest->private; - } - - /* Check we can do fulfill required attributes */ - if ((vme_attr->aspace & ~(VME_A16 | VME_A24 | VME_A32 | VME_USER1 | - VME_USER2)) != 0) { - - dev_err(dev, "Unsupported cycle type\n"); - retval = -EINVAL; - goto err_aspace; - } - - if ((vme_attr->cycle & ~(VME_SCT | VME_BLT | VME_SUPER | VME_USER | - VME_PROG | VME_DATA)) != 0) { - - dev_err(dev, "Unsupported cycle type\n"); - retval = -EINVAL; - goto err_cycle; - } - - /* Check to see if we can fulfill source and destination */ - if (!(((src->type == VME_DMA_PCI) && (dest->type == VME_DMA_VME)) || - ((src->type == VME_DMA_VME) && (dest->type == VME_DMA_PCI)))) { - - dev_err(dev, "Cannot perform transfer with this " - "source-destination combination\n"); - retval = -EINVAL; - goto err_direct; - } - - /* Setup cycle types */ - if (vme_attr->cycle & VME_BLT) - entry->descriptor.dctl |= CA91CX42_DCTL_VCT_BLT; - - /* Setup data width */ - switch (vme_attr->dwidth) { - case VME_D8: - entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D8; - break; - case VME_D16: - entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D16; - break; - case VME_D32: - entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D32; - break; - case VME_D64: - entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D64; - break; - default: - dev_err(dev, "Invalid data width\n"); - return -EINVAL; - } - - /* Setup address space */ - switch (vme_attr->aspace) { - case VME_A16: - entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A16; - break; - case VME_A24: - entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A24; - break; - case VME_A32: - entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A32; - break; - case VME_USER1: - entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER1; - break; - case VME_USER2: - entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER2; - break; - default: - dev_err(dev, "Invalid address space\n"); - return -EINVAL; - break; - } - - if (vme_attr->cycle & VME_SUPER) - entry->descriptor.dctl |= CA91CX42_DCTL_SUPER_SUPR; - if (vme_attr->cycle & VME_PROG) - entry->descriptor.dctl |= CA91CX42_DCTL_PGM_PGM; - - entry->descriptor.dtbc = count; - entry->descriptor.dla = pci_attr->address; - entry->descriptor.dva = vme_attr->address; - entry->descriptor.dcpp = CA91CX42_DCPP_NULL; - - /* Add to list */ - list_add_tail(&entry->list, &list->entries); - - /* Fill out previous descriptors "Next Address" */ - if (entry->list.prev != &list->entries) { - prev = list_entry(entry->list.prev, struct ca91cx42_dma_entry, - list); - /* We need the bus address for the pointer */ - desc_ptr = virt_to_bus(&entry->descriptor); - prev->descriptor.dcpp = desc_ptr & ~CA91CX42_DCPP_M; - } - - return 0; - -err_cycle: -err_aspace: -err_direct: -err_align: - kfree(entry); -err_mem: - return retval; -} - -static int ca91cx42_dma_busy(struct vme_bridge *ca91cx42_bridge) -{ - u32 tmp; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - tmp = ioread32(bridge->base + DGCS); - - if (tmp & CA91CX42_DGCS_ACT) - return 0; - else - return 1; -} - -static int ca91cx42_dma_list_exec(struct vme_dma_list *list) -{ - struct vme_dma_resource *ctrlr; - struct ca91cx42_dma_entry *entry; - int retval = 0; - dma_addr_t bus_addr; - u32 val; - struct device *dev; - struct ca91cx42_driver *bridge; - - ctrlr = list->parent; - - bridge = ctrlr->parent->driver_priv; - dev = ctrlr->parent->parent; - - mutex_lock(&ctrlr->mtx); - - if (!(list_empty(&ctrlr->running))) { - /* - * XXX We have an active DMA transfer and currently haven't - * sorted out the mechanism for "pending" DMA transfers. - * Return busy. - */ - /* Need to add to pending here */ - mutex_unlock(&ctrlr->mtx); - return -EBUSY; - } else { - list_add(&list->list, &ctrlr->running); - } - - /* Get first bus address and write into registers */ - entry = list_first_entry(&list->entries, struct ca91cx42_dma_entry, - list); - - bus_addr = virt_to_bus(&entry->descriptor); - - mutex_unlock(&ctrlr->mtx); - - iowrite32(0, bridge->base + DTBC); - iowrite32(bus_addr & ~CA91CX42_DCPP_M, bridge->base + DCPP); - - /* Start the operation */ - val = ioread32(bridge->base + DGCS); - - /* XXX Could set VMEbus On and Off Counters here */ - val &= (CA91CX42_DGCS_VON_M | CA91CX42_DGCS_VOFF_M); - - val |= (CA91CX42_DGCS_CHAIN | CA91CX42_DGCS_STOP | CA91CX42_DGCS_HALT | - CA91CX42_DGCS_DONE | CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR | - CA91CX42_DGCS_PERR); - - iowrite32(val, bridge->base + DGCS); - - val |= CA91CX42_DGCS_GO; - - iowrite32(val, bridge->base + DGCS); - - wait_event_interruptible(bridge->dma_queue, - ca91cx42_dma_busy(ctrlr->parent)); - - /* - * Read status register, this register is valid until we kick off a - * new transfer. - */ - val = ioread32(bridge->base + DGCS); - - if (val & (CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR | - CA91CX42_DGCS_PERR)) { - - dev_err(dev, "ca91c042: DMA Error. DGCS=%08X\n", val); - val = ioread32(bridge->base + DCTL); - } - - /* Remove list from running list */ - mutex_lock(&ctrlr->mtx); - list_del(&list->list); - mutex_unlock(&ctrlr->mtx); - - return retval; - -} - -static int ca91cx42_dma_list_empty(struct vme_dma_list *list) -{ - struct list_head *pos, *temp; - struct ca91cx42_dma_entry *entry; - - /* detach and free each entry */ - list_for_each_safe(pos, temp, &list->entries) { - list_del(pos); - entry = list_entry(pos, struct ca91cx42_dma_entry, list); - kfree(entry); - } - - return 0; -} - -/* - * All 4 location monitors reside at the same base - this is therefore a - * system wide configuration. - * - * This does not enable the LM monitor - that should be done when the first - * callback is attached and disabled when the last callback is removed. - */ -static int ca91cx42_lm_set(struct vme_lm_resource *lm, - unsigned long long lm_base, u32 aspace, u32 cycle) -{ - u32 temp_base, lm_ctl = 0; - int i; - struct ca91cx42_driver *bridge; - struct device *dev; - - bridge = lm->parent->driver_priv; - dev = lm->parent->parent; - - /* Check the alignment of the location monitor */ - temp_base = (u32)lm_base; - if (temp_base & 0xffff) { - dev_err(dev, "Location monitor must be aligned to 64KB " - "boundary"); - return -EINVAL; - } - - mutex_lock(&lm->mtx); - - /* If we already have a callback attached, we can't move it! */ - for (i = 0; i < lm->monitors; i++) { - if (bridge->lm_callback[i] != NULL) { - mutex_unlock(&lm->mtx); - dev_err(dev, "Location monitor callback attached, " - "can't reset\n"); - return -EBUSY; - } - } - - switch (aspace) { - case VME_A16: - lm_ctl |= CA91CX42_LM_CTL_AS_A16; - break; - case VME_A24: - lm_ctl |= CA91CX42_LM_CTL_AS_A24; - break; - case VME_A32: - lm_ctl |= CA91CX42_LM_CTL_AS_A32; - break; - default: - mutex_unlock(&lm->mtx); - dev_err(dev, "Invalid address space\n"); - return -EINVAL; - break; - } - - if (cycle & VME_SUPER) - lm_ctl |= CA91CX42_LM_CTL_SUPR; - if (cycle & VME_USER) - lm_ctl |= CA91CX42_LM_CTL_NPRIV; - if (cycle & VME_PROG) - lm_ctl |= CA91CX42_LM_CTL_PGM; - if (cycle & VME_DATA) - lm_ctl |= CA91CX42_LM_CTL_DATA; - - iowrite32(lm_base, bridge->base + LM_BS); - iowrite32(lm_ctl, bridge->base + LM_CTL); - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* Get configuration of the callback monitor and return whether it is enabled - * or disabled. - */ -static int ca91cx42_lm_get(struct vme_lm_resource *lm, - unsigned long long *lm_base, u32 *aspace, u32 *cycle) -{ - u32 lm_ctl, enabled = 0; - struct ca91cx42_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - *lm_base = (unsigned long long)ioread32(bridge->base + LM_BS); - lm_ctl = ioread32(bridge->base + LM_CTL); - - if (lm_ctl & CA91CX42_LM_CTL_EN) - enabled = 1; - - if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A16) - *aspace = VME_A16; - if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A24) - *aspace = VME_A24; - if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A32) - *aspace = VME_A32; - - *cycle = 0; - if (lm_ctl & CA91CX42_LM_CTL_SUPR) - *cycle |= VME_SUPER; - if (lm_ctl & CA91CX42_LM_CTL_NPRIV) - *cycle |= VME_USER; - if (lm_ctl & CA91CX42_LM_CTL_PGM) - *cycle |= VME_PROG; - if (lm_ctl & CA91CX42_LM_CTL_DATA) - *cycle |= VME_DATA; - - mutex_unlock(&lm->mtx); - - return enabled; -} - -/* - * Attach a callback to a specific location monitor. - * - * Callback will be passed the monitor triggered. - */ -static int ca91cx42_lm_attach(struct vme_lm_resource *lm, int monitor, - void (*callback)(int)) -{ - u32 lm_ctl, tmp; - struct ca91cx42_driver *bridge; - struct device *dev; - - bridge = lm->parent->driver_priv; - dev = lm->parent->parent; - - mutex_lock(&lm->mtx); - - /* Ensure that the location monitor is configured - need PGM or DATA */ - lm_ctl = ioread32(bridge->base + LM_CTL); - if ((lm_ctl & (CA91CX42_LM_CTL_PGM | CA91CX42_LM_CTL_DATA)) == 0) { - mutex_unlock(&lm->mtx); - dev_err(dev, "Location monitor not properly configured\n"); - return -EINVAL; - } - - /* Check that a callback isn't already attached */ - if (bridge->lm_callback[monitor] != NULL) { - mutex_unlock(&lm->mtx); - dev_err(dev, "Existing callback attached\n"); - return -EBUSY; - } - - /* Attach callback */ - bridge->lm_callback[monitor] = callback; - - /* Enable Location Monitor interrupt */ - tmp = ioread32(bridge->base + LINT_EN); - tmp |= CA91CX42_LINT_LM[monitor]; - iowrite32(tmp, bridge->base + LINT_EN); - - /* Ensure that global Location Monitor Enable set */ - if ((lm_ctl & CA91CX42_LM_CTL_EN) == 0) { - lm_ctl |= CA91CX42_LM_CTL_EN; - iowrite32(lm_ctl, bridge->base + LM_CTL); - } - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* - * Detach a callback function forn a specific location monitor. - */ -static int ca91cx42_lm_detach(struct vme_lm_resource *lm, int monitor) -{ - u32 tmp; - struct ca91cx42_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - /* Disable Location Monitor and ensure previous interrupts are clear */ - tmp = ioread32(bridge->base + LINT_EN); - tmp &= ~CA91CX42_LINT_LM[monitor]; - iowrite32(tmp, bridge->base + LINT_EN); - - iowrite32(CA91CX42_LINT_LM[monitor], - bridge->base + LINT_STAT); - - /* Detach callback */ - bridge->lm_callback[monitor] = NULL; - - /* If all location monitors disabled, disable global Location Monitor */ - if ((tmp & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 | - CA91CX42_LINT_LM3)) == 0) { - tmp = ioread32(bridge->base + LM_CTL); - tmp &= ~CA91CX42_LM_CTL_EN; - iowrite32(tmp, bridge->base + LM_CTL); - } - - mutex_unlock(&lm->mtx); - - return 0; -} - -static int ca91cx42_slot_get(struct vme_bridge *ca91cx42_bridge) -{ - u32 slot = 0; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - if (!geoid) { - slot = ioread32(bridge->base + VCSR_BS); - slot = ((slot & CA91CX42_VCSR_BS_SLOT_M) >> 27); - } else - slot = geoid; - - return (int)slot; - -} - -void *ca91cx42_alloc_consistent(struct device *parent, size_t size, - dma_addr_t *dma) -{ - struct pci_dev *pdev; - - /* Find pci_dev container of dev */ - pdev = container_of(parent, struct pci_dev, dev); - - return pci_alloc_consistent(pdev, size, dma); -} - -void ca91cx42_free_consistent(struct device *parent, size_t size, void *vaddr, - dma_addr_t dma) -{ - struct pci_dev *pdev; - - /* Find pci_dev container of dev */ - pdev = container_of(parent, struct pci_dev, dev); - - pci_free_consistent(pdev, size, vaddr, dma); -} - -static int __init ca91cx42_init(void) -{ - return pci_register_driver(&ca91cx42_driver); -} - -/* - * Configure CR/CSR space - * - * Access to the CR/CSR can be configured at power-up. The location of the - * CR/CSR registers in the CR/CSR address space is determined by the boards - * Auto-ID or Geographic address. This function ensures that the window is - * enabled at an offset consistent with the boards geopgraphic address. - */ -static int ca91cx42_crcsr_init(struct vme_bridge *ca91cx42_bridge, - struct pci_dev *pdev) -{ - unsigned int crcsr_addr; - int tmp, slot; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - slot = ca91cx42_slot_get(ca91cx42_bridge); - - /* Write CSR Base Address if slot ID is supplied as a module param */ - if (geoid) - iowrite32(geoid << 27, bridge->base + VCSR_BS); - - dev_info(&pdev->dev, "CR/CSR Offset: %d\n", slot); - if (slot == 0) { - dev_err(&pdev->dev, "Slot number is unset, not configuring " - "CR/CSR space\n"); - return -EINVAL; - } - - /* Allocate mem for CR/CSR image */ - bridge->crcsr_kernel = pci_alloc_consistent(pdev, VME_CRCSR_BUF_SIZE, - &bridge->crcsr_bus); - if (bridge->crcsr_kernel == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR " - "image\n"); - return -ENOMEM; - } - - memset(bridge->crcsr_kernel, 0, VME_CRCSR_BUF_SIZE); - - crcsr_addr = slot * (512 * 1024); - iowrite32(bridge->crcsr_bus - crcsr_addr, bridge->base + VCSR_TO); - - tmp = ioread32(bridge->base + VCSR_CTL); - tmp |= CA91CX42_VCSR_CTL_EN; - iowrite32(tmp, bridge->base + VCSR_CTL); - - return 0; -} - -static void ca91cx42_crcsr_exit(struct vme_bridge *ca91cx42_bridge, - struct pci_dev *pdev) -{ - u32 tmp; - struct ca91cx42_driver *bridge; - - bridge = ca91cx42_bridge->driver_priv; - - /* Turn off CR/CSR space */ - tmp = ioread32(bridge->base + VCSR_CTL); - tmp &= ~CA91CX42_VCSR_CTL_EN; - iowrite32(tmp, bridge->base + VCSR_CTL); - - /* Free image */ - iowrite32(0, bridge->base + VCSR_TO); - - pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel, - bridge->crcsr_bus); -} - -static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - int retval, i; - u32 data; - struct list_head *pos = NULL; - struct vme_bridge *ca91cx42_bridge; - struct ca91cx42_driver *ca91cx42_device; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - struct vme_dma_resource *dma_ctrlr; - struct vme_lm_resource *lm; - - /* We want to support more than one of each bridge so we need to - * dynamically allocate the bridge structure - */ - ca91cx42_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL); - - if (ca91cx42_bridge == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for device " - "structure\n"); - retval = -ENOMEM; - goto err_struct; - } - - ca91cx42_device = kzalloc(sizeof(struct ca91cx42_driver), GFP_KERNEL); - - if (ca91cx42_device == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for device " - "structure\n"); - retval = -ENOMEM; - goto err_driver; - } - - ca91cx42_bridge->driver_priv = ca91cx42_device; - - /* Enable the device */ - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "Unable to enable device\n"); - goto err_enable; - } - - /* Map Registers */ - retval = pci_request_regions(pdev, driver_name); - if (retval) { - dev_err(&pdev->dev, "Unable to reserve resources\n"); - goto err_resource; - } - - /* map registers in BAR 0 */ - ca91cx42_device->base = ioremap_nocache(pci_resource_start(pdev, 0), - 4096); - if (!ca91cx42_device->base) { - dev_err(&pdev->dev, "Unable to remap CRG region\n"); - retval = -EIO; - goto err_remap; - } - - /* Check to see if the mapping worked out */ - data = ioread32(ca91cx42_device->base + CA91CX42_PCI_ID) & 0x0000FFFF; - if (data != PCI_VENDOR_ID_TUNDRA) { - dev_err(&pdev->dev, "PCI_ID check failed\n"); - retval = -EIO; - goto err_test; - } - - /* Initialize wait queues & mutual exclusion flags */ - init_waitqueue_head(&ca91cx42_device->dma_queue); - init_waitqueue_head(&ca91cx42_device->iack_queue); - mutex_init(&ca91cx42_device->vme_int); - mutex_init(&ca91cx42_device->vme_rmw); - - ca91cx42_bridge->parent = &pdev->dev; - strcpy(ca91cx42_bridge->name, driver_name); - - /* Setup IRQ */ - retval = ca91cx42_irq_init(ca91cx42_bridge); - if (retval != 0) { - dev_err(&pdev->dev, "Chip Initialization failed.\n"); - goto err_irq; - } - - /* Add master windows to list */ - INIT_LIST_HEAD(&ca91cx42_bridge->master_resources); - for (i = 0; i < CA91C142_MAX_MASTER; i++) { - master_image = kmalloc(sizeof(struct vme_master_resource), - GFP_KERNEL); - if (master_image == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "master resource structure\n"); - retval = -ENOMEM; - goto err_master; - } - master_image->parent = ca91cx42_bridge; - spin_lock_init(&master_image->lock); - master_image->locked = 0; - master_image->number = i; - master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_CRCSR | VME_USER1 | VME_USER2; - master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_SUPER | VME_USER | VME_PROG | VME_DATA; - master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64; - memset(&master_image->bus_resource, 0, - sizeof(struct resource)); - master_image->kern_base = NULL; - list_add_tail(&master_image->list, - &ca91cx42_bridge->master_resources); - } - - /* Add slave windows to list */ - INIT_LIST_HEAD(&ca91cx42_bridge->slave_resources); - for (i = 0; i < CA91C142_MAX_SLAVE; i++) { - slave_image = kmalloc(sizeof(struct vme_slave_resource), - GFP_KERNEL); - if (slave_image == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "slave resource structure\n"); - retval = -ENOMEM; - goto err_slave; - } - slave_image->parent = ca91cx42_bridge; - mutex_init(&slave_image->mtx); - slave_image->locked = 0; - slave_image->number = i; - slave_image->address_attr = VME_A24 | VME_A32 | VME_USER1 | - VME_USER2; - - /* Only windows 0 and 4 support A16 */ - if (i == 0 || i == 4) - slave_image->address_attr |= VME_A16; - - slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_SUPER | VME_USER | VME_PROG | VME_DATA; - list_add_tail(&slave_image->list, - &ca91cx42_bridge->slave_resources); - } - - /* Add dma engines to list */ - INIT_LIST_HEAD(&ca91cx42_bridge->dma_resources); - for (i = 0; i < CA91C142_MAX_DMA; i++) { - dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource), - GFP_KERNEL); - if (dma_ctrlr == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "dma resource structure\n"); - retval = -ENOMEM; - goto err_dma; - } - dma_ctrlr->parent = ca91cx42_bridge; - mutex_init(&dma_ctrlr->mtx); - dma_ctrlr->locked = 0; - dma_ctrlr->number = i; - dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM | - VME_DMA_MEM_TO_VME; - INIT_LIST_HEAD(&dma_ctrlr->pending); - INIT_LIST_HEAD(&dma_ctrlr->running); - list_add_tail(&dma_ctrlr->list, - &ca91cx42_bridge->dma_resources); - } - - /* Add location monitor to list */ - INIT_LIST_HEAD(&ca91cx42_bridge->lm_resources); - lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); - if (lm == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "location monitor resource structure\n"); - retval = -ENOMEM; - goto err_lm; - } - lm->parent = ca91cx42_bridge; - mutex_init(&lm->mtx); - lm->locked = 0; - lm->number = 1; - lm->monitors = 4; - list_add_tail(&lm->list, &ca91cx42_bridge->lm_resources); - - ca91cx42_bridge->slave_get = ca91cx42_slave_get; - ca91cx42_bridge->slave_set = ca91cx42_slave_set; - ca91cx42_bridge->master_get = ca91cx42_master_get; - ca91cx42_bridge->master_set = ca91cx42_master_set; - ca91cx42_bridge->master_read = ca91cx42_master_read; - ca91cx42_bridge->master_write = ca91cx42_master_write; - ca91cx42_bridge->master_rmw = ca91cx42_master_rmw; - ca91cx42_bridge->dma_list_add = ca91cx42_dma_list_add; - ca91cx42_bridge->dma_list_exec = ca91cx42_dma_list_exec; - ca91cx42_bridge->dma_list_empty = ca91cx42_dma_list_empty; - ca91cx42_bridge->irq_set = ca91cx42_irq_set; - ca91cx42_bridge->irq_generate = ca91cx42_irq_generate; - ca91cx42_bridge->lm_set = ca91cx42_lm_set; - ca91cx42_bridge->lm_get = ca91cx42_lm_get; - ca91cx42_bridge->lm_attach = ca91cx42_lm_attach; - ca91cx42_bridge->lm_detach = ca91cx42_lm_detach; - ca91cx42_bridge->slot_get = ca91cx42_slot_get; - ca91cx42_bridge->alloc_consistent = ca91cx42_alloc_consistent; - ca91cx42_bridge->free_consistent = ca91cx42_free_consistent; - - data = ioread32(ca91cx42_device->base + MISC_CTL); - dev_info(&pdev->dev, "Board is%s the VME system controller\n", - (data & CA91CX42_MISC_CTL_SYSCON) ? "" : " not"); - dev_info(&pdev->dev, "Slot ID is %d\n", - ca91cx42_slot_get(ca91cx42_bridge)); - - if (ca91cx42_crcsr_init(ca91cx42_bridge, pdev)) - dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); - - /* Need to save ca91cx42_bridge pointer locally in link list for use in - * ca91cx42_remove() - */ - retval = vme_register_bridge(ca91cx42_bridge); - if (retval != 0) { - dev_err(&pdev->dev, "Chip Registration failed.\n"); - goto err_reg; - } - - pci_set_drvdata(pdev, ca91cx42_bridge); - - return 0; - -err_reg: - ca91cx42_crcsr_exit(ca91cx42_bridge, pdev); -err_lm: - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->lm_resources) { - lm = list_entry(pos, struct vme_lm_resource, list); - list_del(pos); - kfree(lm); - } -err_dma: - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->dma_resources) { - dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); - list_del(pos); - kfree(dma_ctrlr); - } -err_slave: - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } -err_master: - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - ca91cx42_irq_exit(ca91cx42_device, pdev); -err_irq: -err_test: - iounmap(ca91cx42_device->base); -err_remap: - pci_release_regions(pdev); -err_resource: - pci_disable_device(pdev); -err_enable: - kfree(ca91cx42_device); -err_driver: - kfree(ca91cx42_bridge); -err_struct: - return retval; - -} - -static void ca91cx42_remove(struct pci_dev *pdev) -{ - struct list_head *pos = NULL; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - struct vme_dma_resource *dma_ctrlr; - struct vme_lm_resource *lm; - struct ca91cx42_driver *bridge; - struct vme_bridge *ca91cx42_bridge = pci_get_drvdata(pdev); - - bridge = ca91cx42_bridge->driver_priv; - - - /* Turn off Ints */ - iowrite32(0, bridge->base + LINT_EN); - - /* Turn off the windows */ - iowrite32(0x00800000, bridge->base + LSI0_CTL); - iowrite32(0x00800000, bridge->base + LSI1_CTL); - iowrite32(0x00800000, bridge->base + LSI2_CTL); - iowrite32(0x00800000, bridge->base + LSI3_CTL); - iowrite32(0x00800000, bridge->base + LSI4_CTL); - iowrite32(0x00800000, bridge->base + LSI5_CTL); - iowrite32(0x00800000, bridge->base + LSI6_CTL); - iowrite32(0x00800000, bridge->base + LSI7_CTL); - iowrite32(0x00F00000, bridge->base + VSI0_CTL); - iowrite32(0x00F00000, bridge->base + VSI1_CTL); - iowrite32(0x00F00000, bridge->base + VSI2_CTL); - iowrite32(0x00F00000, bridge->base + VSI3_CTL); - iowrite32(0x00F00000, bridge->base + VSI4_CTL); - iowrite32(0x00F00000, bridge->base + VSI5_CTL); - iowrite32(0x00F00000, bridge->base + VSI6_CTL); - iowrite32(0x00F00000, bridge->base + VSI7_CTL); - - vme_unregister_bridge(ca91cx42_bridge); - - ca91cx42_crcsr_exit(ca91cx42_bridge, pdev); - - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->lm_resources) { - lm = list_entry(pos, struct vme_lm_resource, list); - list_del(pos); - kfree(lm); - } - - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->dma_resources) { - dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); - list_del(pos); - kfree(dma_ctrlr); - } - - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } - - /* resources are stored in link list */ - list_for_each(pos, &ca91cx42_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - ca91cx42_irq_exit(bridge, pdev); - - iounmap(bridge->base); - - pci_release_regions(pdev); - - pci_disable_device(pdev); - - kfree(ca91cx42_bridge); -} - -static void __exit ca91cx42_exit(void) -{ - pci_unregister_driver(&ca91cx42_driver); -} - -MODULE_PARM_DESC(geoid, "Override geographical addressing"); -module_param(geoid, int, 0); - -MODULE_DESCRIPTION("VME driver for the Tundra Universe II VME bridge"); -MODULE_LICENSE("GPL"); - -module_init(ca91cx42_init); -module_exit(ca91cx42_exit); diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.h b/drivers/staging/vme/bridges/vme_ca91cx42.h deleted file mode 100644 index 02a7c794db05..000000000000 --- a/drivers/staging/vme/bridges/vme_ca91cx42.h +++ /dev/null @@ -1,583 +0,0 @@ -/* - * ca91c042.h - * - * Support for the Tundra Universe 1 and Universe II VME bridge chips - * - * Author: Tom Armistead - * Updated by Ajit Prem - * Copyright 2004 Motorola Inc. - * - * Further updated by Martyn Welch <martyn.welch@ge.com> - * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc. - * - * Derived from ca91c042.h by Michael Wyrick - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _CA91CX42_H -#define _CA91CX42_H - -#ifndef PCI_VENDOR_ID_TUNDRA -#define PCI_VENDOR_ID_TUNDRA 0x10e3 -#endif - -#ifndef PCI_DEVICE_ID_TUNDRA_CA91C142 -#define PCI_DEVICE_ID_TUNDRA_CA91C142 0x0000 -#endif - -/* - * Define the number of each that the CA91C142 supports. - */ -#define CA91C142_MAX_MASTER 8 /* Max Master Windows */ -#define CA91C142_MAX_SLAVE 8 /* Max Slave Windows */ -#define CA91C142_MAX_DMA 1 /* Max DMA Controllers */ -#define CA91C142_MAX_MAILBOX 4 /* Max Mail Box registers */ - -/* Structure used to hold driver specific information */ -struct ca91cx42_driver { - void __iomem *base; /* Base Address of device registers */ - wait_queue_head_t dma_queue; - wait_queue_head_t iack_queue; - wait_queue_head_t mbox_queue; - void (*lm_callback[4])(int); /* Called in interrupt handler */ - void *crcsr_kernel; - dma_addr_t crcsr_bus; - struct mutex vme_rmw; /* Only one RMW cycle at a time */ - struct mutex vme_int; /* - * Only one VME interrupt can be - * generated at a time, provide locking - */ -}; - -/* See Page 2-77 in the Universe User Manual */ -struct ca91cx42_dma_descriptor { - unsigned int dctl; /* DMA Control */ - unsigned int dtbc; /* Transfer Byte Count */ - unsigned int dla; /* PCI Address */ - unsigned int res1; /* Reserved */ - unsigned int dva; /* Vme Address */ - unsigned int res2; /* Reserved */ - unsigned int dcpp; /* Pointer to Numed Cmd Packet with rPN */ - unsigned int res3; /* Reserved */ -}; - -struct ca91cx42_dma_entry { - struct ca91cx42_dma_descriptor descriptor; - struct list_head list; -}; - -/* Universe Register Offsets */ -/* general PCI configuration registers */ -#define CA91CX42_PCI_ID 0x000 -#define CA91CX42_PCI_CSR 0x004 -#define CA91CX42_PCI_CLASS 0x008 -#define CA91CX42_PCI_MISC0 0x00C -#define CA91CX42_PCI_BS 0x010 -#define CA91CX42_PCI_MISC1 0x03C - -#define LSI0_CTL 0x0100 -#define LSI0_BS 0x0104 -#define LSI0_BD 0x0108 -#define LSI0_TO 0x010C - -#define LSI1_CTL 0x0114 -#define LSI1_BS 0x0118 -#define LSI1_BD 0x011C -#define LSI1_TO 0x0120 - -#define LSI2_CTL 0x0128 -#define LSI2_BS 0x012C -#define LSI2_BD 0x0130 -#define LSI2_TO 0x0134 - -#define LSI3_CTL 0x013C -#define LSI3_BS 0x0140 -#define LSI3_BD 0x0144 -#define LSI3_TO 0x0148 - -#define LSI4_CTL 0x01A0 -#define LSI4_BS 0x01A4 -#define LSI4_BD 0x01A8 -#define LSI4_TO 0x01AC - -#define LSI5_CTL 0x01B4 -#define LSI5_BS 0x01B8 -#define LSI5_BD 0x01BC -#define LSI5_TO 0x01C0 - -#define LSI6_CTL 0x01C8 -#define LSI6_BS 0x01CC -#define LSI6_BD 0x01D0 -#define LSI6_TO 0x01D4 - -#define LSI7_CTL 0x01DC -#define LSI7_BS 0x01E0 -#define LSI7_BD 0x01E4 -#define LSI7_TO 0x01E8 - -static const int CA91CX42_LSI_CTL[] = { LSI0_CTL, LSI1_CTL, LSI2_CTL, LSI3_CTL, - LSI4_CTL, LSI5_CTL, LSI6_CTL, LSI7_CTL }; - -static const int CA91CX42_LSI_BS[] = { LSI0_BS, LSI1_BS, LSI2_BS, LSI3_BS, - LSI4_BS, LSI5_BS, LSI6_BS, LSI7_BS }; - -static const int CA91CX42_LSI_BD[] = { LSI0_BD, LSI1_BD, LSI2_BD, LSI3_BD, - LSI4_BD, LSI5_BD, LSI6_BD, LSI7_BD }; - -static const int CA91CX42_LSI_TO[] = { LSI0_TO, LSI1_TO, LSI2_TO, LSI3_TO, - LSI4_TO, LSI5_TO, LSI6_TO, LSI7_TO }; - -#define SCYC_CTL 0x0170 -#define SCYC_ADDR 0x0174 -#define SCYC_EN 0x0178 -#define SCYC_CMP 0x017C -#define SCYC_SWP 0x0180 -#define LMISC 0x0184 -#define SLSI 0x0188 -#define L_CMDERR 0x018C -#define LAERR 0x0190 - -#define DCTL 0x0200 -#define DTBC 0x0204 -#define DLA 0x0208 -#define DVA 0x0210 -#define DCPP 0x0218 -#define DGCS 0x0220 -#define D_LLUE 0x0224 - -#define LINT_EN 0x0300 -#define LINT_STAT 0x0304 -#define LINT_MAP0 0x0308 -#define LINT_MAP1 0x030C -#define VINT_EN 0x0310 -#define VINT_STAT 0x0314 -#define VINT_MAP0 0x0318 -#define VINT_MAP1 0x031C -#define STATID 0x0320 - -#define V1_STATID 0x0324 -#define V2_STATID 0x0328 -#define V3_STATID 0x032C -#define V4_STATID 0x0330 -#define V5_STATID 0x0334 -#define V6_STATID 0x0338 -#define V7_STATID 0x033C - -static const int CA91CX42_V_STATID[8] = { 0, V1_STATID, V2_STATID, V3_STATID, - V4_STATID, V5_STATID, V6_STATID, - V7_STATID }; - -#define LINT_MAP2 0x0340 -#define VINT_MAP2 0x0344 - -#define MBOX0 0x0348 -#define MBOX1 0x034C -#define MBOX2 0x0350 -#define MBOX3 0x0354 -#define SEMA0 0x0358 -#define SEMA1 0x035C - -#define MAST_CTL 0x0400 -#define MISC_CTL 0x0404 -#define MISC_STAT 0x0408 -#define USER_AM 0x040C - -#define VSI0_CTL 0x0F00 -#define VSI0_BS 0x0F04 -#define VSI0_BD 0x0F08 -#define VSI0_TO 0x0F0C - -#define VSI1_CTL 0x0F14 -#define VSI1_BS 0x0F18 -#define VSI1_BD 0x0F1C -#define VSI1_TO 0x0F20 - -#define VSI2_CTL 0x0F28 -#define VSI2_BS 0x0F2C -#define VSI2_BD 0x0F30 -#define VSI2_TO 0x0F34 - -#define VSI3_CTL 0x0F3C -#define VSI3_BS 0x0F40 -#define VSI3_BD 0x0F44 -#define VSI3_TO 0x0F48 - -#define LM_CTL 0x0F64 -#define LM_BS 0x0F68 - -#define VRAI_CTL 0x0F70 - -#define VRAI_BS 0x0F74 -#define VCSR_CTL 0x0F80 -#define VCSR_TO 0x0F84 -#define V_AMERR 0x0F88 -#define VAERR 0x0F8C - -#define VSI4_CTL 0x0F90 -#define VSI4_BS 0x0F94 -#define VSI4_BD 0x0F98 -#define VSI4_TO 0x0F9C - -#define VSI5_CTL 0x0FA4 -#define VSI5_BS 0x0FA8 -#define VSI5_BD 0x0FAC -#define VSI5_TO 0x0FB0 - -#define VSI6_CTL 0x0FB8 -#define VSI6_BS 0x0FBC -#define VSI6_BD 0x0FC0 -#define VSI6_TO 0x0FC4 - -#define VSI7_CTL 0x0FCC -#define VSI7_BS 0x0FD0 -#define VSI7_BD 0x0FD4 -#define VSI7_TO 0x0FD8 - -static const int CA91CX42_VSI_CTL[] = { VSI0_CTL, VSI1_CTL, VSI2_CTL, VSI3_CTL, - VSI4_CTL, VSI5_CTL, VSI6_CTL, VSI7_CTL }; - -static const int CA91CX42_VSI_BS[] = { VSI0_BS, VSI1_BS, VSI2_BS, VSI3_BS, - VSI4_BS, VSI5_BS, VSI6_BS, VSI7_BS }; - -static const int CA91CX42_VSI_BD[] = { VSI0_BD, VSI1_BD, VSI2_BD, VSI3_BD, - VSI4_BD, VSI5_BD, VSI6_BD, VSI7_BD }; - -static const int CA91CX42_VSI_TO[] = { VSI0_TO, VSI1_TO, VSI2_TO, VSI3_TO, - VSI4_TO, VSI5_TO, VSI6_TO, VSI7_TO }; - -#define VCSR_CLR 0x0FF4 -#define VCSR_SET 0x0FF8 -#define VCSR_BS 0x0FFC - -/* - * PCI Class Register - * offset 008 - */ -#define CA91CX42_BM_PCI_CLASS_BASE 0xFF000000 -#define CA91CX42_OF_PCI_CLASS_BASE 24 -#define CA91CX42_BM_PCI_CLASS_SUB 0x00FF0000 -#define CA91CX42_OF_PCI_CLASS_SUB 16 -#define CA91CX42_BM_PCI_CLASS_PROG 0x0000FF00 -#define CA91CX42_OF_PCI_CLASS_PROG 8 -#define CA91CX42_BM_PCI_CLASS_RID 0x000000FF -#define CA91CX42_OF_PCI_CLASS_RID 0 - -#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_I 0 -#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_II 1 - -/* - * PCI Misc Register - * offset 00C - */ -#define CA91CX42_BM_PCI_MISC0_BISTC 0x80000000 -#define CA91CX42_BM_PCI_MISC0_SBIST 0x60000000 -#define CA91CX42_BM_PCI_MISC0_CCODE 0x0F000000 -#define CA91CX42_BM_PCI_MISC0_MFUNCT 0x00800000 -#define CA91CX42_BM_PCI_MISC0_LAYOUT 0x007F0000 -#define CA91CX42_BM_PCI_MISC0_LTIMER 0x0000FF00 -#define CA91CX42_OF_PCI_MISC0_LTIMER 8 - - -/* - * LSI Control Register - * offset 100 - */ -#define CA91CX42_LSI_CTL_EN (1<<31) -#define CA91CX42_LSI_CTL_PWEN (1<<30) - -#define CA91CX42_LSI_CTL_VDW_M (3<<22) -#define CA91CX42_LSI_CTL_VDW_D8 0 -#define CA91CX42_LSI_CTL_VDW_D16 (1<<22) -#define CA91CX42_LSI_CTL_VDW_D32 (1<<23) -#define CA91CX42_LSI_CTL_VDW_D64 (3<<22) - -#define CA91CX42_LSI_CTL_VAS_M (7<<16) -#define CA91CX42_LSI_CTL_VAS_A16 0 -#define CA91CX42_LSI_CTL_VAS_A24 (1<<16) -#define CA91CX42_LSI_CTL_VAS_A32 (1<<17) -#define CA91CX42_LSI_CTL_VAS_CRCSR (5<<16) -#define CA91CX42_LSI_CTL_VAS_USER1 (3<<17) -#define CA91CX42_LSI_CTL_VAS_USER2 (7<<16) - -#define CA91CX42_LSI_CTL_PGM_M (1<<14) -#define CA91CX42_LSI_CTL_PGM_DATA 0 -#define CA91CX42_LSI_CTL_PGM_PGM (1<<14) - -#define CA91CX42_LSI_CTL_SUPER_M (1<<12) -#define CA91CX42_LSI_CTL_SUPER_NPRIV 0 -#define CA91CX42_LSI_CTL_SUPER_SUPR (1<<12) - -#define CA91CX42_LSI_CTL_VCT_M (1<<8) -#define CA91CX42_LSI_CTL_VCT_BLT (1<<8) -#define CA91CX42_LSI_CTL_VCT_MBLT (1<<8) -#define CA91CX42_LSI_CTL_LAS (1<<0) - -/* - * SCYC_CTL Register - * offset 178 - */ -#define CA91CX42_SCYC_CTL_LAS_PCIMEM 0 -#define CA91CX42_SCYC_CTL_LAS_PCIIO (1<<2) - -#define CA91CX42_SCYC_CTL_CYC_M (3<<0) -#define CA91CX42_SCYC_CTL_CYC_RMW (1<<0) -#define CA91CX42_SCYC_CTL_CYC_ADOH (1<<1) - -/* - * LMISC Register - * offset 184 - */ -#define CA91CX42_BM_LMISC_CRT 0xF0000000 -#define CA91CX42_OF_LMISC_CRT 28 -#define CA91CX42_BM_LMISC_CWT 0x0F000000 -#define CA91CX42_OF_LMISC_CWT 24 - -/* - * SLSI Register - * offset 188 - */ -#define CA91CX42_BM_SLSI_EN 0x80000000 -#define CA91CX42_BM_SLSI_PWEN 0x40000000 -#define CA91CX42_BM_SLSI_VDW 0x00F00000 -#define CA91CX42_OF_SLSI_VDW 20 -#define CA91CX42_BM_SLSI_PGM 0x0000F000 -#define CA91CX42_OF_SLSI_PGM 12 -#define CA91CX42_BM_SLSI_SUPER 0x00000F00 -#define CA91CX42_OF_SLSI_SUPER 8 -#define CA91CX42_BM_SLSI_BS 0x000000F6 -#define CA91CX42_OF_SLSI_BS 2 -#define CA91CX42_BM_SLSI_LAS 0x00000003 -#define CA91CX42_OF_SLSI_LAS 0 -#define CA91CX42_BM_SLSI_RESERVED 0x3F0F0000 - -/* - * DCTL Register - * offset 200 - */ -#define CA91CX42_DCTL_L2V (1<<31) -#define CA91CX42_DCTL_VDW_M (3<<22) -#define CA91CX42_DCTL_VDW_M (3<<22) -#define CA91CX42_DCTL_VDW_D8 0 -#define CA91CX42_DCTL_VDW_D16 (1<<22) -#define CA91CX42_DCTL_VDW_D32 (1<<23) -#define CA91CX42_DCTL_VDW_D64 (3<<22) - -#define CA91CX42_DCTL_VAS_M (7<<16) -#define CA91CX42_DCTL_VAS_A16 0 -#define CA91CX42_DCTL_VAS_A24 (1<<16) -#define CA91CX42_DCTL_VAS_A32 (1<<17) -#define CA91CX42_DCTL_VAS_USER1 (3<<17) -#define CA91CX42_DCTL_VAS_USER2 (7<<16) - -#define CA91CX42_DCTL_PGM_M (1<<14) -#define CA91CX42_DCTL_PGM_DATA 0 -#define CA91CX42_DCTL_PGM_PGM (1<<14) - -#define CA91CX42_DCTL_SUPER_M (1<<12) -#define CA91CX42_DCTL_SUPER_NPRIV 0 -#define CA91CX42_DCTL_SUPER_SUPR (1<<12) - -#define CA91CX42_DCTL_VCT_M (1<<8) -#define CA91CX42_DCTL_VCT_BLT (1<<8) -#define CA91CX42_DCTL_LD64EN (1<<7) - -/* - * DCPP Register - * offset 218 - */ -#define CA91CX42_DCPP_M 0xf -#define CA91CX42_DCPP_NULL (1<<0) - -/* - * DMA General Control/Status Register (DGCS) - * offset 220 - */ -#define CA91CX42_DGCS_GO (1<<31) -#define CA91CX42_DGCS_STOP_REQ (1<<30) -#define CA91CX42_DGCS_HALT_REQ (1<<29) -#define CA91CX42_DGCS_CHAIN (1<<27) - -#define CA91CX42_DGCS_VON_M (7<<20) - -#define CA91CX42_DGCS_VOFF_M (0xf<<16) - -#define CA91CX42_DGCS_ACT (1<<15) -#define CA91CX42_DGCS_STOP (1<<14) -#define CA91CX42_DGCS_HALT (1<<13) -#define CA91CX42_DGCS_DONE (1<<11) -#define CA91CX42_DGCS_LERR (1<<10) -#define CA91CX42_DGCS_VERR (1<<9) -#define CA91CX42_DGCS_PERR (1<<8) -#define CA91CX42_DGCS_INT_STOP (1<<6) -#define CA91CX42_DGCS_INT_HALT (1<<5) -#define CA91CX42_DGCS_INT_DONE (1<<3) -#define CA91CX42_DGCS_INT_LERR (1<<2) -#define CA91CX42_DGCS_INT_VERR (1<<1) -#define CA91CX42_DGCS_INT_PERR (1<<0) - -/* - * PCI Interrupt Enable Register - * offset 300 - */ -#define CA91CX42_LINT_LM3 0x00800000 -#define CA91CX42_LINT_LM2 0x00400000 -#define CA91CX42_LINT_LM1 0x00200000 -#define CA91CX42_LINT_LM0 0x00100000 -#define CA91CX42_LINT_MBOX3 0x00080000 -#define CA91CX42_LINT_MBOX2 0x00040000 -#define CA91CX42_LINT_MBOX1 0x00020000 -#define CA91CX42_LINT_MBOX0 0x00010000 -#define CA91CX42_LINT_ACFAIL 0x00008000 -#define CA91CX42_LINT_SYSFAIL 0x00004000 -#define CA91CX42_LINT_SW_INT 0x00002000 -#define CA91CX42_LINT_SW_IACK 0x00001000 - -#define CA91CX42_LINT_VERR 0x00000400 -#define CA91CX42_LINT_LERR 0x00000200 -#define CA91CX42_LINT_DMA 0x00000100 -#define CA91CX42_LINT_VIRQ7 0x00000080 -#define CA91CX42_LINT_VIRQ6 0x00000040 -#define CA91CX42_LINT_VIRQ5 0x00000020 -#define CA91CX42_LINT_VIRQ4 0x00000010 -#define CA91CX42_LINT_VIRQ3 0x00000008 -#define CA91CX42_LINT_VIRQ2 0x00000004 -#define CA91CX42_LINT_VIRQ1 0x00000002 -#define CA91CX42_LINT_VOWN 0x00000001 - -static const int CA91CX42_LINT_VIRQ[] = { 0, CA91CX42_LINT_VIRQ1, - CA91CX42_LINT_VIRQ2, CA91CX42_LINT_VIRQ3, - CA91CX42_LINT_VIRQ4, CA91CX42_LINT_VIRQ5, - CA91CX42_LINT_VIRQ6, CA91CX42_LINT_VIRQ7 }; - -#define CA91CX42_LINT_MBOX 0x000F0000 - -static const int CA91CX42_LINT_LM[] = { CA91CX42_LINT_LM0, CA91CX42_LINT_LM1, - CA91CX42_LINT_LM2, CA91CX42_LINT_LM3 }; - -/* - * MAST_CTL Register - * offset 400 - */ -#define CA91CX42_BM_MAST_CTL_MAXRTRY 0xF0000000 -#define CA91CX42_OF_MAST_CTL_MAXRTRY 28 -#define CA91CX42_BM_MAST_CTL_PWON 0x0F000000 -#define CA91CX42_OF_MAST_CTL_PWON 24 -#define CA91CX42_BM_MAST_CTL_VRL 0x00C00000 -#define CA91CX42_OF_MAST_CTL_VRL 22 -#define CA91CX42_BM_MAST_CTL_VRM 0x00200000 -#define CA91CX42_BM_MAST_CTL_VREL 0x00100000 -#define CA91CX42_BM_MAST_CTL_VOWN 0x00080000 -#define CA91CX42_BM_MAST_CTL_VOWN_ACK 0x00040000 -#define CA91CX42_BM_MAST_CTL_PABS 0x00001000 -#define CA91CX42_BM_MAST_CTL_BUS_NO 0x0000000F -#define CA91CX42_OF_MAST_CTL_BUS_NO 0 - -/* - * MISC_CTL Register - * offset 404 - */ -#define CA91CX42_MISC_CTL_VBTO 0xF0000000 -#define CA91CX42_MISC_CTL_VARB 0x04000000 -#define CA91CX42_MISC_CTL_VARBTO 0x03000000 -#define CA91CX42_MISC_CTL_SW_LRST 0x00800000 -#define CA91CX42_MISC_CTL_SW_SRST 0x00400000 -#define CA91CX42_MISC_CTL_BI 0x00100000 -#define CA91CX42_MISC_CTL_ENGBI 0x00080000 -#define CA91CX42_MISC_CTL_RESCIND 0x00040000 -#define CA91CX42_MISC_CTL_SYSCON 0x00020000 -#define CA91CX42_MISC_CTL_V64AUTO 0x00010000 -#define CA91CX42_MISC_CTL_RESERVED 0x0820FFFF - -#define CA91CX42_OF_MISC_CTL_VARBTO 24 -#define CA91CX42_OF_MISC_CTL_VBTO 28 - -/* - * MISC_STAT Register - * offset 408 - */ -#define CA91CX42_BM_MISC_STAT_ENDIAN 0x80000000 -#define CA91CX42_BM_MISC_STAT_LCLSIZE 0x40000000 -#define CA91CX42_BM_MISC_STAT_DY4AUTO 0x08000000 -#define CA91CX42_BM_MISC_STAT_MYBBSY 0x00200000 -#define CA91CX42_BM_MISC_STAT_DY4DONE 0x00080000 -#define CA91CX42_BM_MISC_STAT_TXFE 0x00040000 -#define CA91CX42_BM_MISC_STAT_RXFE 0x00020000 -#define CA91CX42_BM_MISC_STAT_DY4AUTOID 0x0000FF00 -#define CA91CX42_OF_MISC_STAT_DY4AUTOID 8 - -/* - * VSI Control Register - * offset F00 - */ -#define CA91CX42_VSI_CTL_EN (1<<31) -#define CA91CX42_VSI_CTL_PWEN (1<<30) -#define CA91CX42_VSI_CTL_PREN (1<<29) - -#define CA91CX42_VSI_CTL_PGM_M (3<<22) -#define CA91CX42_VSI_CTL_PGM_DATA (1<<22) -#define CA91CX42_VSI_CTL_PGM_PGM (1<<23) - -#define CA91CX42_VSI_CTL_SUPER_M (3<<20) -#define CA91CX42_VSI_CTL_SUPER_NPRIV (1<<20) -#define CA91CX42_VSI_CTL_SUPER_SUPR (1<<21) - -#define CA91CX42_VSI_CTL_VAS_M (7<<16) -#define CA91CX42_VSI_CTL_VAS_A16 0 -#define CA91CX42_VSI_CTL_VAS_A24 (1<<16) -#define CA91CX42_VSI_CTL_VAS_A32 (1<<17) -#define CA91CX42_VSI_CTL_VAS_USER1 (3<<17) -#define CA91CX42_VSI_CTL_VAS_USER2 (7<<16) - -#define CA91CX42_VSI_CTL_LD64EN (1<<7) -#define CA91CX42_VSI_CTL_LLRMW (1<<6) - -#define CA91CX42_VSI_CTL_LAS_M (3<<0) -#define CA91CX42_VSI_CTL_LAS_PCI_MS 0 -#define CA91CX42_VSI_CTL_LAS_PCI_IO (1<<0) -#define CA91CX42_VSI_CTL_LAS_PCI_CONF (1<<1) - -/* LM_CTL Register - * offset F64 - */ -#define CA91CX42_LM_CTL_EN (1<<31) -#define CA91CX42_LM_CTL_PGM (1<<23) -#define CA91CX42_LM_CTL_DATA (1<<22) -#define CA91CX42_LM_CTL_SUPR (1<<21) -#define CA91CX42_LM_CTL_NPRIV (1<<20) -#define CA91CX42_LM_CTL_AS_M (5<<16) -#define CA91CX42_LM_CTL_AS_A16 0 -#define CA91CX42_LM_CTL_AS_A24 (1<<16) -#define CA91CX42_LM_CTL_AS_A32 (1<<17) - -/* - * VRAI_CTL Register - * offset F70 - */ -#define CA91CX42_BM_VRAI_CTL_EN 0x80000000 -#define CA91CX42_BM_VRAI_CTL_PGM 0x00C00000 -#define CA91CX42_OF_VRAI_CTL_PGM 22 -#define CA91CX42_BM_VRAI_CTL_SUPER 0x00300000 -#define CA91CX42_OF_VRAI_CTL_SUPER 20 -#define CA91CX42_BM_VRAI_CTL_VAS 0x00030000 -#define CA91CX42_OF_VRAI_CTL_VAS 16 - -/* VCSR_CTL Register - * offset F80 - */ -#define CA91CX42_VCSR_CTL_EN (1<<31) - -#define CA91CX42_VCSR_CTL_LAS_M (3<<0) -#define CA91CX42_VCSR_CTL_LAS_PCI_MS 0 -#define CA91CX42_VCSR_CTL_LAS_PCI_IO (1<<0) -#define CA91CX42_VCSR_CTL_LAS_PCI_CONF (1<<1) - -/* VCSR_BS Register - * offset FFC - */ -#define CA91CX42_VCSR_BS_SLOT_M (0x1F<<27) - -#endif /* _CA91CX42_H */ diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c deleted file mode 100644 index f50582169b24..000000000000 --- a/drivers/staging/vme/bridges/vme_tsi148.c +++ /dev/null @@ -1,2660 +0,0 @@ -/* - * Support for the Tundra TSI148 VME-PCI Bridge Chip - * - * Author: Martyn Welch <martyn.welch@ge.com> - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * Based on work by Tom Armistead and Ajit Prem - * Copyright 2004 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/mm.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/pci.h> -#include <linux/poll.h> -#include <linux/dma-mapping.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/time.h> -#include <linux/io.h> -#include <linux/uaccess.h> - -#include "../vme.h" -#include "../vme_bridge.h" -#include "vme_tsi148.h" - -static int __init tsi148_init(void); -static int tsi148_probe(struct pci_dev *, const struct pci_device_id *); -static void tsi148_remove(struct pci_dev *); -static void __exit tsi148_exit(void); - - -/* Module parameter */ -static bool err_chk; -static int geoid; - -static const char driver_name[] = "vme_tsi148"; - -static DEFINE_PCI_DEVICE_TABLE(tsi148_ids) = { - { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) }, - { }, -}; - -static struct pci_driver tsi148_driver = { - .name = driver_name, - .id_table = tsi148_ids, - .probe = tsi148_probe, - .remove = tsi148_remove, -}; - -static void reg_join(unsigned int high, unsigned int low, - unsigned long long *variable) -{ - *variable = (unsigned long long)high << 32; - *variable |= (unsigned long long)low; -} - -static void reg_split(unsigned long long variable, unsigned int *high, - unsigned int *low) -{ - *low = (unsigned int)variable & 0xFFFFFFFF; - *high = (unsigned int)(variable >> 32); -} - -/* - * Wakes up DMA queue. - */ -static u32 tsi148_DMA_irqhandler(struct tsi148_driver *bridge, - int channel_mask) -{ - u32 serviced = 0; - - if (channel_mask & TSI148_LCSR_INTS_DMA0S) { - wake_up(&bridge->dma_queue[0]); - serviced |= TSI148_LCSR_INTC_DMA0C; - } - if (channel_mask & TSI148_LCSR_INTS_DMA1S) { - wake_up(&bridge->dma_queue[1]); - serviced |= TSI148_LCSR_INTC_DMA1C; - } - - return serviced; -} - -/* - * Wake up location monitor queue - */ -static u32 tsi148_LM_irqhandler(struct tsi148_driver *bridge, u32 stat) -{ - int i; - u32 serviced = 0; - - for (i = 0; i < 4; i++) { - if (stat & TSI148_LCSR_INTS_LMS[i]) { - /* We only enable interrupts if the callback is set */ - bridge->lm_callback[i](i); - serviced |= TSI148_LCSR_INTC_LMC[i]; - } - } - - return serviced; -} - -/* - * Wake up mail box queue. - * - * XXX This functionality is not exposed up though API. - */ -static u32 tsi148_MB_irqhandler(struct vme_bridge *tsi148_bridge, u32 stat) -{ - int i; - u32 val; - u32 serviced = 0; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - for (i = 0; i < 4; i++) { - if (stat & TSI148_LCSR_INTS_MBS[i]) { - val = ioread32be(bridge->base + TSI148_GCSR_MBOX[i]); - dev_err(tsi148_bridge->parent, "VME Mailbox %d received" - ": 0x%x\n", i, val); - serviced |= TSI148_LCSR_INTC_MBC[i]; - } - } - - return serviced; -} - -/* - * Display error & status message when PERR (PCI) exception interrupt occurs. - */ -static u32 tsi148_PERR_irqhandler(struct vme_bridge *tsi148_bridge) -{ - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, " - "attributes: %08x\n", - ioread32be(bridge->base + TSI148_LCSR_EDPAU), - ioread32be(bridge->base + TSI148_LCSR_EDPAL), - ioread32be(bridge->base + TSI148_LCSR_EDPAT)); - - dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split " - "completion reg: %08x\n", - ioread32be(bridge->base + TSI148_LCSR_EDPXA), - ioread32be(bridge->base + TSI148_LCSR_EDPXS)); - - iowrite32be(TSI148_LCSR_EDPAT_EDPCL, bridge->base + TSI148_LCSR_EDPAT); - - return TSI148_LCSR_INTC_PERRC; -} - -/* - * Save address and status when VME error interrupt occurs. - */ -static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) -{ - unsigned int error_addr_high, error_addr_low; - unsigned long long error_addr; - u32 error_attrib; - struct vme_bus_error *error; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU); - error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL); - error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT); - - reg_join(error_addr_high, error_addr_low, &error_addr); - - /* Check for exception register overflow (we have lost error data) */ - if (error_attrib & TSI148_LCSR_VEAT_VEOF) { - dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow " - "Occurred\n"); - } - - error = kmalloc(sizeof(struct vme_bus_error), GFP_ATOMIC); - if (error) { - error->address = error_addr; - error->attributes = error_attrib; - list_add_tail(&error->list, &tsi148_bridge->vme_errors); - } else { - dev_err(tsi148_bridge->parent, "Unable to alloc memory for " - "VMEbus Error reporting\n"); - dev_err(tsi148_bridge->parent, "VME Bus Error at address: " - "0x%llx, attributes: %08x\n", error_addr, error_attrib); - } - - /* Clear Status */ - iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT); - - return TSI148_LCSR_INTC_VERRC; -} - -/* - * Wake up IACK queue. - */ -static u32 tsi148_IACK_irqhandler(struct tsi148_driver *bridge) -{ - wake_up(&bridge->iack_queue); - - return TSI148_LCSR_INTC_IACKC; -} - -/* - * Calling VME bus interrupt callback if provided. - */ -static u32 tsi148_VIRQ_irqhandler(struct vme_bridge *tsi148_bridge, - u32 stat) -{ - int vec, i, serviced = 0; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - for (i = 7; i > 0; i--) { - if (stat & (1 << i)) { - /* - * Note: Even though the registers are defined as - * 32-bits in the spec, we only want to issue 8-bit - * IACK cycles on the bus, read from offset 3. - */ - vec = ioread8(bridge->base + TSI148_LCSR_VIACK[i] + 3); - - vme_irq_handler(tsi148_bridge, i, vec); - - serviced |= (1 << i); - } - } - - return serviced; -} - -/* - * Top level interrupt handler. Clears appropriate interrupt status bits and - * then calls appropriate sub handler(s). - */ -static irqreturn_t tsi148_irqhandler(int irq, void *ptr) -{ - u32 stat, enable, serviced = 0; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = ptr; - - bridge = tsi148_bridge->driver_priv; - - /* Determine which interrupts are unmasked and set */ - enable = ioread32be(bridge->base + TSI148_LCSR_INTEO); - stat = ioread32be(bridge->base + TSI148_LCSR_INTS); - - /* Only look at unmasked interrupts */ - stat &= enable; - - if (unlikely(!stat)) - return IRQ_NONE; - - /* Call subhandlers as appropriate */ - /* DMA irqs */ - if (stat & (TSI148_LCSR_INTS_DMA1S | TSI148_LCSR_INTS_DMA0S)) - serviced |= tsi148_DMA_irqhandler(bridge, stat); - - /* Location monitor irqs */ - if (stat & (TSI148_LCSR_INTS_LM3S | TSI148_LCSR_INTS_LM2S | - TSI148_LCSR_INTS_LM1S | TSI148_LCSR_INTS_LM0S)) - serviced |= tsi148_LM_irqhandler(bridge, stat); - - /* Mail box irqs */ - if (stat & (TSI148_LCSR_INTS_MB3S | TSI148_LCSR_INTS_MB2S | - TSI148_LCSR_INTS_MB1S | TSI148_LCSR_INTS_MB0S)) - serviced |= tsi148_MB_irqhandler(tsi148_bridge, stat); - - /* PCI bus error */ - if (stat & TSI148_LCSR_INTS_PERRS) - serviced |= tsi148_PERR_irqhandler(tsi148_bridge); - - /* VME bus error */ - if (stat & TSI148_LCSR_INTS_VERRS) - serviced |= tsi148_VERR_irqhandler(tsi148_bridge); - - /* IACK irq */ - if (stat & TSI148_LCSR_INTS_IACKS) - serviced |= tsi148_IACK_irqhandler(bridge); - - /* VME bus irqs */ - if (stat & (TSI148_LCSR_INTS_IRQ7S | TSI148_LCSR_INTS_IRQ6S | - TSI148_LCSR_INTS_IRQ5S | TSI148_LCSR_INTS_IRQ4S | - TSI148_LCSR_INTS_IRQ3S | TSI148_LCSR_INTS_IRQ2S | - TSI148_LCSR_INTS_IRQ1S)) - serviced |= tsi148_VIRQ_irqhandler(tsi148_bridge, stat); - - /* Clear serviced interrupts */ - iowrite32be(serviced, bridge->base + TSI148_LCSR_INTC); - - return IRQ_HANDLED; -} - -static int tsi148_irq_init(struct vme_bridge *tsi148_bridge) -{ - int result; - unsigned int tmp; - struct pci_dev *pdev; - struct tsi148_driver *bridge; - - pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); - - bridge = tsi148_bridge->driver_priv; - - /* Initialise list for VME bus errors */ - INIT_LIST_HEAD(&tsi148_bridge->vme_errors); - - mutex_init(&tsi148_bridge->irq_mtx); - - result = request_irq(pdev->irq, - tsi148_irqhandler, - IRQF_SHARED, - driver_name, tsi148_bridge); - if (result) { - dev_err(tsi148_bridge->parent, "Can't get assigned pci irq " - "vector %02X\n", pdev->irq); - return result; - } - - /* Enable and unmask interrupts */ - tmp = TSI148_LCSR_INTEO_DMA1EO | TSI148_LCSR_INTEO_DMA0EO | - TSI148_LCSR_INTEO_MB3EO | TSI148_LCSR_INTEO_MB2EO | - TSI148_LCSR_INTEO_MB1EO | TSI148_LCSR_INTEO_MB0EO | - TSI148_LCSR_INTEO_PERREO | TSI148_LCSR_INTEO_VERREO | - TSI148_LCSR_INTEO_IACKEO; - - /* This leaves the following interrupts masked. - * TSI148_LCSR_INTEO_VIEEO - * TSI148_LCSR_INTEO_SYSFLEO - * TSI148_LCSR_INTEO_ACFLEO - */ - - /* Don't enable Location Monitor interrupts here - they will be - * enabled when the location monitors are properly configured and - * a callback has been attached. - * TSI148_LCSR_INTEO_LM0EO - * TSI148_LCSR_INTEO_LM1EO - * TSI148_LCSR_INTEO_LM2EO - * TSI148_LCSR_INTEO_LM3EO - */ - - /* Don't enable VME interrupts until we add a handler, else the board - * will respond to it and we don't want that unless it knows how to - * properly deal with it. - * TSI148_LCSR_INTEO_IRQ7EO - * TSI148_LCSR_INTEO_IRQ6EO - * TSI148_LCSR_INTEO_IRQ5EO - * TSI148_LCSR_INTEO_IRQ4EO - * TSI148_LCSR_INTEO_IRQ3EO - * TSI148_LCSR_INTEO_IRQ2EO - * TSI148_LCSR_INTEO_IRQ1EO - */ - - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - - return 0; -} - -static void tsi148_irq_exit(struct vme_bridge *tsi148_bridge, - struct pci_dev *pdev) -{ - struct tsi148_driver *bridge = tsi148_bridge->driver_priv; - - /* Turn off interrupts */ - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEO); - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEN); - - /* Clear all interrupts */ - iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_INTC); - - /* Detach interrupt handler */ - free_irq(pdev->irq, tsi148_bridge); -} - -/* - * Check to see if an IACk has been received, return true (1) or false (0). - */ -static int tsi148_iack_received(struct tsi148_driver *bridge) -{ - u32 tmp; - - tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); - - if (tmp & TSI148_LCSR_VICR_IRQS) - return 0; - else - return 1; -} - -/* - * Configure VME interrupt - */ -static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level, - int state, int sync) -{ - struct pci_dev *pdev; - u32 tmp; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - /* We need to do the ordering differently for enabling and disabling */ - if (state == 0) { - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); - tmp &= ~TSI148_LCSR_INTEN_IRQEN[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp &= ~TSI148_LCSR_INTEO_IRQEO[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - if (sync != 0) { - pdev = container_of(tsi148_bridge->parent, - struct pci_dev, dev); - - synchronize_irq(pdev->irq); - } - } else { - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp |= TSI148_LCSR_INTEO_IRQEO[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); - tmp |= TSI148_LCSR_INTEN_IRQEN[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - } -} - -/* - * Generate a VME bus interrupt at the requested level & vector. Wait for - * interrupt to be acked. - */ -static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level, - int statid) -{ - u32 tmp; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&bridge->vme_int); - - /* Read VICR register */ - tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); - - /* Set Status/ID */ - tmp = (tmp & ~TSI148_LCSR_VICR_STID_M) | - (statid & TSI148_LCSR_VICR_STID_M); - iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); - - /* Assert VMEbus IRQ */ - tmp = tmp | TSI148_LCSR_VICR_IRQL[level]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); - - /* XXX Consider implementing a timeout? */ - wait_event_interruptible(bridge->iack_queue, - tsi148_iack_received(bridge)); - - mutex_unlock(&bridge->vme_int); - - return 0; -} - -/* - * Find the first error in this address range - */ -static struct vme_bus_error *tsi148_find_error(struct vme_bridge *tsi148_bridge, - u32 aspace, unsigned long long address, size_t count) -{ - struct list_head *err_pos; - struct vme_bus_error *vme_err, *valid = NULL; - unsigned long long bound; - - bound = address + count; - - /* - * XXX We are currently not looking at the address space when parsing - * for errors. This is because parsing the Address Modifier Codes - * is going to be quite resource intensive to do properly. We - * should be OK just looking at the addresses and this is certainly - * much better than what we had before. - */ - err_pos = NULL; - /* Iterate through errors */ - list_for_each(err_pos, &tsi148_bridge->vme_errors) { - vme_err = list_entry(err_pos, struct vme_bus_error, list); - if ((vme_err->address >= address) && - (vme_err->address < bound)) { - - valid = vme_err; - break; - } - } - - return valid; -} - -/* - * Clear errors in the provided address range. - */ -static void tsi148_clear_errors(struct vme_bridge *tsi148_bridge, - u32 aspace, unsigned long long address, size_t count) -{ - struct list_head *err_pos, *temp; - struct vme_bus_error *vme_err; - unsigned long long bound; - - bound = address + count; - - /* - * XXX We are currently not looking at the address space when parsing - * for errors. This is because parsing the Address Modifier Codes - * is going to be quite resource intensive to do properly. We - * should be OK just looking at the addresses and this is certainly - * much better than what we had before. - */ - err_pos = NULL; - /* Iterate through errors */ - list_for_each_safe(err_pos, temp, &tsi148_bridge->vme_errors) { - vme_err = list_entry(err_pos, struct vme_bus_error, list); - - if ((vme_err->address >= address) && - (vme_err->address < bound)) { - - list_del(err_pos); - kfree(vme_err); - } - } -} - -/* - * Initialize a slave window with the requested attributes. - */ -static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, - dma_addr_t pci_base, u32 aspace, u32 cycle) -{ - unsigned int i, addr = 0, granularity = 0; - unsigned int temp_ctl = 0; - unsigned int vme_base_low, vme_base_high; - unsigned int vme_bound_low, vme_bound_high; - unsigned int pci_offset_low, pci_offset_high; - unsigned long long vme_bound, pci_offset; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = image->parent; - bridge = tsi148_bridge->driver_priv; - - i = image->number; - - switch (aspace) { - case VME_A16: - granularity = 0x10; - addr |= TSI148_LCSR_ITAT_AS_A16; - break; - case VME_A24: - granularity = 0x1000; - addr |= TSI148_LCSR_ITAT_AS_A24; - break; - case VME_A32: - granularity = 0x10000; - addr |= TSI148_LCSR_ITAT_AS_A32; - break; - case VME_A64: - granularity = 0x10000; - addr |= TSI148_LCSR_ITAT_AS_A64; - break; - case VME_CRCSR: - case VME_USER1: - case VME_USER2: - case VME_USER3: - case VME_USER4: - default: - dev_err(tsi148_bridge->parent, "Invalid address space\n"); - return -EINVAL; - break; - } - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_split(vme_base, &vme_base_high, &vme_base_low); - - /* - * Bound address is a valid address for the window, adjust - * accordingly - */ - vme_bound = vme_base + size - granularity; - reg_split(vme_bound, &vme_bound_high, &vme_bound_low); - pci_offset = (unsigned long long)pci_base - vme_base; - reg_split(pci_offset, &pci_offset_high, &pci_offset_low); - - if (vme_base_low & (granularity - 1)) { - dev_err(tsi148_bridge->parent, "Invalid VME base alignment\n"); - return -EINVAL; - } - if (vme_bound_low & (granularity - 1)) { - dev_err(tsi148_bridge->parent, "Invalid VME bound alignment\n"); - return -EINVAL; - } - if (pci_offset_low & (granularity - 1)) { - dev_err(tsi148_bridge->parent, "Invalid PCI Offset " - "alignment\n"); - return -EINVAL; - } - - /* Disable while we are mucking around */ - temp_ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - temp_ctl &= ~TSI148_LCSR_ITAT_EN; - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - /* Setup mapping */ - iowrite32be(vme_base_high, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAU); - iowrite32be(vme_base_low, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAL); - iowrite32be(vme_bound_high, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAU); - iowrite32be(vme_bound_low, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAL); - iowrite32be(pci_offset_high, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFU); - iowrite32be(pci_offset_low, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFL); - - /* Setup 2eSST speeds */ - temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160; - break; - case VME_2eSST267: - temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267; - break; - case VME_2eSST320: - temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - temp_ctl &= ~(0x1F << 7); - if (cycle & VME_BLT) - temp_ctl |= TSI148_LCSR_ITAT_BLT; - if (cycle & VME_MBLT) - temp_ctl |= TSI148_LCSR_ITAT_MBLT; - if (cycle & VME_2eVME) - temp_ctl |= TSI148_LCSR_ITAT_2eVME; - if (cycle & VME_2eSST) - temp_ctl |= TSI148_LCSR_ITAT_2eSST; - if (cycle & VME_2eSSTB) - temp_ctl |= TSI148_LCSR_ITAT_2eSSTB; - - /* Setup address space */ - temp_ctl &= ~TSI148_LCSR_ITAT_AS_M; - temp_ctl |= addr; - - temp_ctl &= ~0xF; - if (cycle & VME_SUPER) - temp_ctl |= TSI148_LCSR_ITAT_SUPR ; - if (cycle & VME_USER) - temp_ctl |= TSI148_LCSR_ITAT_NPRIV; - if (cycle & VME_PROG) - temp_ctl |= TSI148_LCSR_ITAT_PGM; - if (cycle & VME_DATA) - temp_ctl |= TSI148_LCSR_ITAT_DATA; - - /* Write ctl reg without enable */ - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - if (enabled) - temp_ctl |= TSI148_LCSR_ITAT_EN; - - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - return 0; -} - -/* - * Get slave window configuration. - */ -static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, - dma_addr_t *pci_base, u32 *aspace, u32 *cycle) -{ - unsigned int i, granularity = 0, ctl = 0; - unsigned int vme_base_low, vme_base_high; - unsigned int vme_bound_low, vme_bound_high; - unsigned int pci_offset_low, pci_offset_high; - unsigned long long vme_bound, pci_offset; - struct tsi148_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - /* Read registers */ - ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - vme_base_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAU); - vme_base_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAL); - vme_bound_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAU); - vme_bound_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAL); - pci_offset_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFU); - pci_offset_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFL); - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_join(vme_base_high, vme_base_low, vme_base); - reg_join(vme_bound_high, vme_bound_low, &vme_bound); - reg_join(pci_offset_high, pci_offset_low, &pci_offset); - - *pci_base = (dma_addr_t)vme_base + pci_offset; - - *enabled = 0; - *aspace = 0; - *cycle = 0; - - if (ctl & TSI148_LCSR_ITAT_EN) - *enabled = 1; - - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A16) { - granularity = 0x10; - *aspace |= VME_A16; - } - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A24) { - granularity = 0x1000; - *aspace |= VME_A24; - } - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A32) { - granularity = 0x10000; - *aspace |= VME_A32; - } - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A64) { - granularity = 0x10000; - *aspace |= VME_A64; - } - - /* Need granularity before we set the size */ - *size = (unsigned long long)((vme_bound - *vme_base) + granularity); - - - if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) - *cycle |= VME_2eSST160; - if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) - *cycle |= VME_2eSST267; - if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) - *cycle |= VME_2eSST320; - - if (ctl & TSI148_LCSR_ITAT_BLT) - *cycle |= VME_BLT; - if (ctl & TSI148_LCSR_ITAT_MBLT) - *cycle |= VME_MBLT; - if (ctl & TSI148_LCSR_ITAT_2eVME) - *cycle |= VME_2eVME; - if (ctl & TSI148_LCSR_ITAT_2eSST) - *cycle |= VME_2eSST; - if (ctl & TSI148_LCSR_ITAT_2eSSTB) - *cycle |= VME_2eSSTB; - - if (ctl & TSI148_LCSR_ITAT_SUPR) - *cycle |= VME_SUPER; - if (ctl & TSI148_LCSR_ITAT_NPRIV) - *cycle |= VME_USER; - if (ctl & TSI148_LCSR_ITAT_PGM) - *cycle |= VME_PROG; - if (ctl & TSI148_LCSR_ITAT_DATA) - *cycle |= VME_DATA; - - return 0; -} - -/* - * Allocate and map PCI Resource - */ -static int tsi148_alloc_resource(struct vme_master_resource *image, - unsigned long long size) -{ - unsigned long long existing_size; - int retval = 0; - struct pci_dev *pdev; - struct vme_bridge *tsi148_bridge; - - tsi148_bridge = image->parent; - - pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); - - existing_size = (unsigned long long)(image->bus_resource.end - - image->bus_resource.start); - - /* If the existing size is OK, return */ - if ((size != 0) && (existing_size == (size - 1))) - return 0; - - if (existing_size != 0) { - iounmap(image->kern_base); - image->kern_base = NULL; - kfree(image->bus_resource.name); - release_resource(&image->bus_resource); - memset(&image->bus_resource, 0, sizeof(struct resource)); - } - - /* Exit here if size is zero */ - if (size == 0) - return 0; - - if (image->bus_resource.name == NULL) { - image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC); - if (image->bus_resource.name == NULL) { - dev_err(tsi148_bridge->parent, "Unable to allocate " - "memory for resource name\n"); - retval = -ENOMEM; - goto err_name; - } - } - - sprintf((char *)image->bus_resource.name, "%s.%d", tsi148_bridge->name, - image->number); - - image->bus_resource.start = 0; - image->bus_resource.end = (unsigned long)size; - image->bus_resource.flags = IORESOURCE_MEM; - - retval = pci_bus_alloc_resource(pdev->bus, - &image->bus_resource, size, size, PCIBIOS_MIN_MEM, - 0, NULL, NULL); - if (retval) { - dev_err(tsi148_bridge->parent, "Failed to allocate mem " - "resource for window %d size 0x%lx start 0x%lx\n", - image->number, (unsigned long)size, - (unsigned long)image->bus_resource.start); - goto err_resource; - } - - image->kern_base = ioremap_nocache( - image->bus_resource.start, size); - if (image->kern_base == NULL) { - dev_err(tsi148_bridge->parent, "Failed to remap resource\n"); - retval = -ENOMEM; - goto err_remap; - } - - return 0; - -err_remap: - release_resource(&image->bus_resource); -err_resource: - kfree(image->bus_resource.name); - memset(&image->bus_resource, 0, sizeof(struct resource)); -err_name: - return retval; -} - -/* - * Free and unmap PCI Resource - */ -static void tsi148_free_resource(struct vme_master_resource *image) -{ - iounmap(image->kern_base); - image->kern_base = NULL; - release_resource(&image->bus_resource); - kfree(image->bus_resource.name); - memset(&image->bus_resource, 0, sizeof(struct resource)); -} - -/* - * Set the attributes of an outbound window. - */ -static int tsi148_master_set(struct vme_master_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, u32 aspace, - u32 cycle, u32 dwidth) -{ - int retval = 0; - unsigned int i; - unsigned int temp_ctl = 0; - unsigned int pci_base_low, pci_base_high; - unsigned int pci_bound_low, pci_bound_high; - unsigned int vme_offset_low, vme_offset_high; - unsigned long long pci_bound, vme_offset, pci_base; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = image->parent; - - bridge = tsi148_bridge->driver_priv; - - /* Verify input data */ - if (vme_base & 0xFFFF) { - dev_err(tsi148_bridge->parent, "Invalid VME Window " - "alignment\n"); - retval = -EINVAL; - goto err_window; - } - - if ((size == 0) && (enabled != 0)) { - dev_err(tsi148_bridge->parent, "Size must be non-zero for " - "enabled windows\n"); - retval = -EINVAL; - goto err_window; - } - - spin_lock(&image->lock); - - /* Let's allocate the resource here rather than further up the stack as - * it avoids pushing loads of bus dependent stuff up the stack. If size - * is zero, any existing resource will be freed. - */ - retval = tsi148_alloc_resource(image, size); - if (retval) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Unable to allocate memory for " - "resource\n"); - goto err_res; - } - - if (size == 0) { - pci_base = 0; - pci_bound = 0; - vme_offset = 0; - } else { - pci_base = (unsigned long long)image->bus_resource.start; - - /* - * Bound address is a valid address for the window, adjust - * according to window granularity. - */ - pci_bound = pci_base + (size - 0x10000); - vme_offset = vme_base - pci_base; - } - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_split(pci_base, &pci_base_high, &pci_base_low); - reg_split(pci_bound, &pci_bound_high, &pci_bound_low); - reg_split(vme_offset, &vme_offset_high, &vme_offset_low); - - if (pci_base_low & 0xFFFF) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid PCI base alignment\n"); - retval = -EINVAL; - goto err_gran; - } - if (pci_bound_low & 0xFFFF) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid PCI bound alignment\n"); - retval = -EINVAL; - goto err_gran; - } - if (vme_offset_low & 0xFFFF) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid VME Offset " - "alignment\n"); - retval = -EINVAL; - goto err_gran; - } - - i = image->number; - - /* Disable while we are mucking around */ - temp_ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - temp_ctl &= ~TSI148_LCSR_OTAT_EN; - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - /* Setup 2eSST speeds */ - temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160; - break; - case VME_2eSST267: - temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267; - break; - case VME_2eSST320: - temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - if (cycle & VME_BLT) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_BLT; - } - if (cycle & VME_MBLT) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_MBLT; - } - if (cycle & VME_2eVME) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; - } - if (cycle & VME_2eSST) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; - } - if (cycle & VME_2eSSTB) { - dev_warn(tsi148_bridge->parent, "Currently not setting " - "Broadcast Select Registers\n"); - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB; - } - - /* Setup data width */ - temp_ctl &= ~TSI148_LCSR_OTAT_DBW_M; - switch (dwidth) { - case VME_D16: - temp_ctl |= TSI148_LCSR_OTAT_DBW_16; - break; - case VME_D32: - temp_ctl |= TSI148_LCSR_OTAT_DBW_32; - break; - default: - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid data width\n"); - retval = -EINVAL; - goto err_dwidth; - } - - /* Setup address space */ - temp_ctl &= ~TSI148_LCSR_OTAT_AMODE_M; - switch (aspace) { - case VME_A16: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A16; - break; - case VME_A24: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A24; - break; - case VME_A32: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A32; - break; - case VME_A64: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A64; - break; - case VME_CRCSR: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_CRCSR; - break; - case VME_USER1: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER1; - break; - case VME_USER2: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER2; - break; - case VME_USER3: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER3; - break; - case VME_USER4: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER4; - break; - default: - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid address space\n"); - retval = -EINVAL; - goto err_aspace; - break; - } - - temp_ctl &= ~(3<<4); - if (cycle & VME_SUPER) - temp_ctl |= TSI148_LCSR_OTAT_SUP; - if (cycle & VME_PROG) - temp_ctl |= TSI148_LCSR_OTAT_PGM; - - /* Setup mapping */ - iowrite32be(pci_base_high, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAU); - iowrite32be(pci_base_low, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAL); - iowrite32be(pci_bound_high, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAU); - iowrite32be(pci_bound_low, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAL); - iowrite32be(vme_offset_high, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFU); - iowrite32be(vme_offset_low, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFL); - - /* Write ctl reg without enable */ - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - if (enabled) - temp_ctl |= TSI148_LCSR_OTAT_EN; - - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - spin_unlock(&image->lock); - return 0; - -err_aspace: -err_dwidth: -err_gran: - tsi148_free_resource(image); -err_res: -err_window: - return retval; - -} - -/* - * Set the attributes of an outbound window. - * - * XXX Not parsing prefetch information. - */ -static int __tsi148_master_get(struct vme_master_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, u32 *aspace, - u32 *cycle, u32 *dwidth) -{ - unsigned int i, ctl; - unsigned int pci_base_low, pci_base_high; - unsigned int pci_bound_low, pci_bound_high; - unsigned int vme_offset_low, vme_offset_high; - - unsigned long long pci_base, pci_bound, vme_offset; - struct tsi148_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - pci_base_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAU); - pci_base_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAL); - pci_bound_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAU); - pci_bound_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAL); - vme_offset_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFU); - vme_offset_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFL); - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_join(pci_base_high, pci_base_low, &pci_base); - reg_join(pci_bound_high, pci_bound_low, &pci_bound); - reg_join(vme_offset_high, vme_offset_low, &vme_offset); - - *vme_base = pci_base + vme_offset; - *size = (unsigned long long)(pci_bound - pci_base) + 0x10000; - - *enabled = 0; - *aspace = 0; - *cycle = 0; - *dwidth = 0; - - if (ctl & TSI148_LCSR_OTAT_EN) - *enabled = 1; - - /* Setup address space */ - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A16) - *aspace |= VME_A16; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A24) - *aspace |= VME_A24; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A32) - *aspace |= VME_A32; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A64) - *aspace |= VME_A64; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_CRCSR) - *aspace |= VME_CRCSR; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER1) - *aspace |= VME_USER1; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER2) - *aspace |= VME_USER2; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER3) - *aspace |= VME_USER3; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER4) - *aspace |= VME_USER4; - - /* Setup 2eSST speeds */ - if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) - *cycle |= VME_2eSST160; - if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) - *cycle |= VME_2eSST267; - if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) - *cycle |= VME_2eSST320; - - /* Setup cycle types */ - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_SCT) - *cycle |= VME_SCT; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_BLT) - *cycle |= VME_BLT; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_MBLT) - *cycle |= VME_MBLT; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eVME) - *cycle |= VME_2eVME; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSST) - *cycle |= VME_2eSST; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSSTB) - *cycle |= VME_2eSSTB; - - if (ctl & TSI148_LCSR_OTAT_SUP) - *cycle |= VME_SUPER; - else - *cycle |= VME_USER; - - if (ctl & TSI148_LCSR_OTAT_PGM) - *cycle |= VME_PROG; - else - *cycle |= VME_DATA; - - /* Setup data width */ - if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_16) - *dwidth = VME_D16; - if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_32) - *dwidth = VME_D32; - - return 0; -} - - -static int tsi148_master_get(struct vme_master_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, u32 *aspace, - u32 *cycle, u32 *dwidth) -{ - int retval; - - spin_lock(&image->lock); - - retval = __tsi148_master_get(image, enabled, vme_base, size, aspace, - cycle, dwidth); - - spin_unlock(&image->lock); - - return retval; -} - -static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, - size_t count, loff_t offset) -{ - int retval, enabled; - unsigned long long vme_base, size; - u32 aspace, cycle, dwidth; - struct vme_bus_error *vme_err = NULL; - struct vme_bridge *tsi148_bridge; - - tsi148_bridge = image->parent; - - spin_lock(&image->lock); - - memcpy_fromio(buf, image->kern_base + offset, (unsigned int)count); - retval = count; - - if (!err_chk) - goto skip_chk; - - __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, - &dwidth); - - vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, - count); - if (vme_err != NULL) { - dev_err(image->parent->parent, "First VME read error detected " - "an at address 0x%llx\n", vme_err->address); - retval = vme_err->address - (vme_base + offset); - /* Clear down save errors in this address range */ - tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, - count); - } - -skip_chk: - spin_unlock(&image->lock); - - return retval; -} - - -static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf, - size_t count, loff_t offset) -{ - int retval = 0, enabled; - unsigned long long vme_base, size; - u32 aspace, cycle, dwidth; - - struct vme_bus_error *vme_err = NULL; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = image->parent; - - bridge = tsi148_bridge->driver_priv; - - spin_lock(&image->lock); - - memcpy_toio(image->kern_base + offset, buf, (unsigned int)count); - retval = count; - - /* - * Writes are posted. We need to do a read on the VME bus to flush out - * all of the writes before we check for errors. We can't guarantee - * that reading the data we have just written is safe. It is believed - * that there isn't any read, write re-ordering, so we can read any - * location in VME space, so lets read the Device ID from the tsi148's - * own registers as mapped into CR/CSR space. - * - * We check for saved errors in the written address range/space. - */ - - if (!err_chk) - goto skip_chk; - - /* - * Get window info first, to maximise the time that the buffers may - * fluch on their own - */ - __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, - &dwidth); - - ioread16(bridge->flush_image->kern_base + 0x7F000); - - vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, - count); - if (vme_err != NULL) { - dev_warn(tsi148_bridge->parent, "First VME write error detected" - " an at address 0x%llx\n", vme_err->address); - retval = vme_err->address - (vme_base + offset); - /* Clear down save errors in this address range */ - tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, - count); - } - -skip_chk: - spin_unlock(&image->lock); - - return retval; -} - -/* - * Perform an RMW cycle on the VME bus. - * - * Requires a previously configured master window, returns final value. - */ -static unsigned int tsi148_master_rmw(struct vme_master_resource *image, - unsigned int mask, unsigned int compare, unsigned int swap, - loff_t offset) -{ - unsigned long long pci_addr; - unsigned int pci_addr_high, pci_addr_low; - u32 tmp, result; - int i; - struct tsi148_driver *bridge; - - bridge = image->parent->driver_priv; - - /* Find the PCI address that maps to the desired VME address */ - i = image->number; - - /* Locking as we can only do one of these at a time */ - mutex_lock(&bridge->vme_rmw); - - /* Lock image */ - spin_lock(&image->lock); - - pci_addr_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAU); - pci_addr_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAL); - - reg_join(pci_addr_high, pci_addr_low, &pci_addr); - reg_split(pci_addr + offset, &pci_addr_high, &pci_addr_low); - - /* Configure registers */ - iowrite32be(mask, bridge->base + TSI148_LCSR_RMWEN); - iowrite32be(compare, bridge->base + TSI148_LCSR_RMWC); - iowrite32be(swap, bridge->base + TSI148_LCSR_RMWS); - iowrite32be(pci_addr_high, bridge->base + TSI148_LCSR_RMWAU); - iowrite32be(pci_addr_low, bridge->base + TSI148_LCSR_RMWAL); - - /* Enable RMW */ - tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); - tmp |= TSI148_LCSR_VMCTRL_RMWEN; - iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); - - /* Kick process off with a read to the required address. */ - result = ioread32be(image->kern_base + offset); - - /* Disable RMW */ - tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); - tmp &= ~TSI148_LCSR_VMCTRL_RMWEN; - iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); - - spin_unlock(&image->lock); - - mutex_unlock(&bridge->vme_rmw); - - return result; -} - -static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr, - u32 aspace, u32 cycle, u32 dwidth) -{ - /* Setup 2eSST speeds */ - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - *attr |= TSI148_LCSR_DSAT_2eSSTM_160; - break; - case VME_2eSST267: - *attr |= TSI148_LCSR_DSAT_2eSSTM_267; - break; - case VME_2eSST320: - *attr |= TSI148_LCSR_DSAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - if (cycle & VME_SCT) - *attr |= TSI148_LCSR_DSAT_TM_SCT; - - if (cycle & VME_BLT) - *attr |= TSI148_LCSR_DSAT_TM_BLT; - - if (cycle & VME_MBLT) - *attr |= TSI148_LCSR_DSAT_TM_MBLT; - - if (cycle & VME_2eVME) - *attr |= TSI148_LCSR_DSAT_TM_2eVME; - - if (cycle & VME_2eSST) - *attr |= TSI148_LCSR_DSAT_TM_2eSST; - - if (cycle & VME_2eSSTB) { - dev_err(dev, "Currently not setting Broadcast Select " - "Registers\n"); - *attr |= TSI148_LCSR_DSAT_TM_2eSSTB; - } - - /* Setup data width */ - switch (dwidth) { - case VME_D16: - *attr |= TSI148_LCSR_DSAT_DBW_16; - break; - case VME_D32: - *attr |= TSI148_LCSR_DSAT_DBW_32; - break; - default: - dev_err(dev, "Invalid data width\n"); - return -EINVAL; - } - - /* Setup address space */ - switch (aspace) { - case VME_A16: - *attr |= TSI148_LCSR_DSAT_AMODE_A16; - break; - case VME_A24: - *attr |= TSI148_LCSR_DSAT_AMODE_A24; - break; - case VME_A32: - *attr |= TSI148_LCSR_DSAT_AMODE_A32; - break; - case VME_A64: - *attr |= TSI148_LCSR_DSAT_AMODE_A64; - break; - case VME_CRCSR: - *attr |= TSI148_LCSR_DSAT_AMODE_CRCSR; - break; - case VME_USER1: - *attr |= TSI148_LCSR_DSAT_AMODE_USER1; - break; - case VME_USER2: - *attr |= TSI148_LCSR_DSAT_AMODE_USER2; - break; - case VME_USER3: - *attr |= TSI148_LCSR_DSAT_AMODE_USER3; - break; - case VME_USER4: - *attr |= TSI148_LCSR_DSAT_AMODE_USER4; - break; - default: - dev_err(dev, "Invalid address space\n"); - return -EINVAL; - break; - } - - if (cycle & VME_SUPER) - *attr |= TSI148_LCSR_DSAT_SUP; - if (cycle & VME_PROG) - *attr |= TSI148_LCSR_DSAT_PGM; - - return 0; -} - -static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr, - u32 aspace, u32 cycle, u32 dwidth) -{ - /* Setup 2eSST speeds */ - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - *attr |= TSI148_LCSR_DDAT_2eSSTM_160; - break; - case VME_2eSST267: - *attr |= TSI148_LCSR_DDAT_2eSSTM_267; - break; - case VME_2eSST320: - *attr |= TSI148_LCSR_DDAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - if (cycle & VME_SCT) - *attr |= TSI148_LCSR_DDAT_TM_SCT; - - if (cycle & VME_BLT) - *attr |= TSI148_LCSR_DDAT_TM_BLT; - - if (cycle & VME_MBLT) - *attr |= TSI148_LCSR_DDAT_TM_MBLT; - - if (cycle & VME_2eVME) - *attr |= TSI148_LCSR_DDAT_TM_2eVME; - - if (cycle & VME_2eSST) - *attr |= TSI148_LCSR_DDAT_TM_2eSST; - - if (cycle & VME_2eSSTB) { - dev_err(dev, "Currently not setting Broadcast Select " - "Registers\n"); - *attr |= TSI148_LCSR_DDAT_TM_2eSSTB; - } - - /* Setup data width */ - switch (dwidth) { - case VME_D16: - *attr |= TSI148_LCSR_DDAT_DBW_16; - break; - case VME_D32: - *attr |= TSI148_LCSR_DDAT_DBW_32; - break; - default: - dev_err(dev, "Invalid data width\n"); - return -EINVAL; - } - - /* Setup address space */ - switch (aspace) { - case VME_A16: - *attr |= TSI148_LCSR_DDAT_AMODE_A16; - break; - case VME_A24: - *attr |= TSI148_LCSR_DDAT_AMODE_A24; - break; - case VME_A32: - *attr |= TSI148_LCSR_DDAT_AMODE_A32; - break; - case VME_A64: - *attr |= TSI148_LCSR_DDAT_AMODE_A64; - break; - case VME_CRCSR: - *attr |= TSI148_LCSR_DDAT_AMODE_CRCSR; - break; - case VME_USER1: - *attr |= TSI148_LCSR_DDAT_AMODE_USER1; - break; - case VME_USER2: - *attr |= TSI148_LCSR_DDAT_AMODE_USER2; - break; - case VME_USER3: - *attr |= TSI148_LCSR_DDAT_AMODE_USER3; - break; - case VME_USER4: - *attr |= TSI148_LCSR_DDAT_AMODE_USER4; - break; - default: - dev_err(dev, "Invalid address space\n"); - return -EINVAL; - break; - } - - if (cycle & VME_SUPER) - *attr |= TSI148_LCSR_DDAT_SUP; - if (cycle & VME_PROG) - *attr |= TSI148_LCSR_DDAT_PGM; - - return 0; -} - -/* - * Add a link list descriptor to the list - */ -static int tsi148_dma_list_add(struct vme_dma_list *list, - struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) -{ - struct tsi148_dma_entry *entry, *prev; - u32 address_high, address_low; - struct vme_dma_pattern *pattern_attr; - struct vme_dma_pci *pci_attr; - struct vme_dma_vme *vme_attr; - dma_addr_t desc_ptr; - int retval = 0; - struct vme_bridge *tsi148_bridge; - - tsi148_bridge = list->parent->parent; - - /* Descriptor must be aligned on 64-bit boundaries */ - entry = kmalloc(sizeof(struct tsi148_dma_entry), GFP_KERNEL); - if (entry == NULL) { - dev_err(tsi148_bridge->parent, "Failed to allocate memory for " - "dma resource structure\n"); - retval = -ENOMEM; - goto err_mem; - } - - /* Test descriptor alignment */ - if ((unsigned long)&entry->descriptor & 0x7) { - dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 " - "byte boundary as required: %p\n", - &entry->descriptor); - retval = -EINVAL; - goto err_align; - } - - /* Given we are going to fill out the structure, we probably don't - * need to zero it, but better safe than sorry for now. - */ - memset(&entry->descriptor, 0, sizeof(struct tsi148_dma_descriptor)); - - /* Fill out source part */ - switch (src->type) { - case VME_DMA_PATTERN: - pattern_attr = src->private; - - entry->descriptor.dsal = pattern_attr->pattern; - entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PAT; - /* Default behaviour is 32 bit pattern */ - if (pattern_attr->type & VME_DMA_PATTERN_BYTE) - entry->descriptor.dsat |= TSI148_LCSR_DSAT_PSZ; - - /* It seems that the default behaviour is to increment */ - if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0) - entry->descriptor.dsat |= TSI148_LCSR_DSAT_NIN; - - break; - case VME_DMA_PCI: - pci_attr = src->private; - - reg_split((unsigned long long)pci_attr->address, &address_high, - &address_low); - entry->descriptor.dsau = address_high; - entry->descriptor.dsal = address_low; - entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PCI; - break; - case VME_DMA_VME: - vme_attr = src->private; - - reg_split((unsigned long long)vme_attr->address, &address_high, - &address_low); - entry->descriptor.dsau = address_high; - entry->descriptor.dsal = address_low; - entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_VME; - - retval = tsi148_dma_set_vme_src_attributes( - tsi148_bridge->parent, &entry->descriptor.dsat, - vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); - if (retval < 0) - goto err_source; - break; - default: - dev_err(tsi148_bridge->parent, "Invalid source type\n"); - retval = -EINVAL; - goto err_source; - break; - } - - /* Assume last link - this will be over-written by adding another */ - entry->descriptor.dnlau = 0; - entry->descriptor.dnlal = TSI148_LCSR_DNLAL_LLA; - - - /* Fill out destination part */ - switch (dest->type) { - case VME_DMA_PCI: - pci_attr = dest->private; - - reg_split((unsigned long long)pci_attr->address, &address_high, - &address_low); - entry->descriptor.ddau = address_high; - entry->descriptor.ddal = address_low; - entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_PCI; - break; - case VME_DMA_VME: - vme_attr = dest->private; - - reg_split((unsigned long long)vme_attr->address, &address_high, - &address_low); - entry->descriptor.ddau = address_high; - entry->descriptor.ddal = address_low; - entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_VME; - - retval = tsi148_dma_set_vme_dest_attributes( - tsi148_bridge->parent, &entry->descriptor.ddat, - vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); - if (retval < 0) - goto err_dest; - break; - default: - dev_err(tsi148_bridge->parent, "Invalid destination type\n"); - retval = -EINVAL; - goto err_dest; - break; - } - - /* Fill out count */ - entry->descriptor.dcnt = (u32)count; - - /* Add to list */ - list_add_tail(&entry->list, &list->entries); - - /* Fill out previous descriptors "Next Address" */ - if (entry->list.prev != &list->entries) { - prev = list_entry(entry->list.prev, struct tsi148_dma_entry, - list); - /* We need the bus address for the pointer */ - desc_ptr = virt_to_bus(&entry->descriptor); - reg_split(desc_ptr, &prev->descriptor.dnlau, - &prev->descriptor.dnlal); - } - - return 0; - -err_dest: -err_source: -err_align: - kfree(entry); -err_mem: - return retval; -} - -/* - * Check to see if the provided DMA channel is busy. - */ -static int tsi148_dma_busy(struct vme_bridge *tsi148_bridge, int channel) -{ - u32 tmp; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - tmp = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + - TSI148_LCSR_OFFSET_DSTA); - - if (tmp & TSI148_LCSR_DSTA_BSY) - return 0; - else - return 1; - -} - -/* - * Execute a previously generated link list - * - * XXX Need to provide control register configuration. - */ -static int tsi148_dma_list_exec(struct vme_dma_list *list) -{ - struct vme_dma_resource *ctrlr; - int channel, retval = 0; - struct tsi148_dma_entry *entry; - dma_addr_t bus_addr; - u32 bus_addr_high, bus_addr_low; - u32 val, dctlreg = 0; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - ctrlr = list->parent; - - tsi148_bridge = ctrlr->parent; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&ctrlr->mtx); - - channel = ctrlr->number; - - if (!list_empty(&ctrlr->running)) { - /* - * XXX We have an active DMA transfer and currently haven't - * sorted out the mechanism for "pending" DMA transfers. - * Return busy. - */ - /* Need to add to pending here */ - mutex_unlock(&ctrlr->mtx); - return -EBUSY; - } else { - list_add(&list->list, &ctrlr->running); - } - - /* Get first bus address and write into registers */ - entry = list_first_entry(&list->entries, struct tsi148_dma_entry, - list); - - bus_addr = virt_to_bus(&entry->descriptor); - - mutex_unlock(&ctrlr->mtx); - - reg_split(bus_addr, &bus_addr_high, &bus_addr_low); - - iowrite32be(bus_addr_high, bridge->base + - TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU); - iowrite32be(bus_addr_low, bridge->base + - TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL); - - /* Start the operation */ - iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base + - TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); - - wait_event_interruptible(bridge->dma_queue[channel], - tsi148_dma_busy(ctrlr->parent, channel)); - /* - * Read status register, this register is valid until we kick off a - * new transfer. - */ - val = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + - TSI148_LCSR_OFFSET_DSTA); - - if (val & TSI148_LCSR_DSTA_VBE) { - dev_err(tsi148_bridge->parent, "DMA Error. DSTA=%08X\n", val); - retval = -EIO; - } - - /* Remove list from running list */ - mutex_lock(&ctrlr->mtx); - list_del(&list->list); - mutex_unlock(&ctrlr->mtx); - - return retval; -} - -/* - * Clean up a previously generated link list - * - * We have a separate function, don't assume that the chain can't be reused. - */ -static int tsi148_dma_list_empty(struct vme_dma_list *list) -{ - struct list_head *pos, *temp; - struct tsi148_dma_entry *entry; - - /* detach and free each entry */ - list_for_each_safe(pos, temp, &list->entries) { - list_del(pos); - entry = list_entry(pos, struct tsi148_dma_entry, list); - kfree(entry); - } - - return 0; -} - -/* - * All 4 location monitors reside at the same base - this is therefore a - * system wide configuration. - * - * This does not enable the LM monitor - that should be done when the first - * callback is attached and disabled when the last callback is removed. - */ -static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base, - u32 aspace, u32 cycle) -{ - u32 lm_base_high, lm_base_low, lm_ctl = 0; - int i; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = lm->parent; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&lm->mtx); - - /* If we already have a callback attached, we can't move it! */ - for (i = 0; i < lm->monitors; i++) { - if (bridge->lm_callback[i] != NULL) { - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Location monitor " - "callback attached, can't reset\n"); - return -EBUSY; - } - } - - switch (aspace) { - case VME_A16: - lm_ctl |= TSI148_LCSR_LMAT_AS_A16; - break; - case VME_A24: - lm_ctl |= TSI148_LCSR_LMAT_AS_A24; - break; - case VME_A32: - lm_ctl |= TSI148_LCSR_LMAT_AS_A32; - break; - case VME_A64: - lm_ctl |= TSI148_LCSR_LMAT_AS_A64; - break; - default: - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Invalid address space\n"); - return -EINVAL; - break; - } - - if (cycle & VME_SUPER) - lm_ctl |= TSI148_LCSR_LMAT_SUPR ; - if (cycle & VME_USER) - lm_ctl |= TSI148_LCSR_LMAT_NPRIV; - if (cycle & VME_PROG) - lm_ctl |= TSI148_LCSR_LMAT_PGM; - if (cycle & VME_DATA) - lm_ctl |= TSI148_LCSR_LMAT_DATA; - - reg_split(lm_base, &lm_base_high, &lm_base_low); - - iowrite32be(lm_base_high, bridge->base + TSI148_LCSR_LMBAU); - iowrite32be(lm_base_low, bridge->base + TSI148_LCSR_LMBAL); - iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* Get configuration of the callback monitor and return whether it is enabled - * or disabled. - */ -static int tsi148_lm_get(struct vme_lm_resource *lm, - unsigned long long *lm_base, u32 *aspace, u32 *cycle) -{ - u32 lm_base_high, lm_base_low, lm_ctl, enabled = 0; - struct tsi148_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - lm_base_high = ioread32be(bridge->base + TSI148_LCSR_LMBAU); - lm_base_low = ioread32be(bridge->base + TSI148_LCSR_LMBAL); - lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); - - reg_join(lm_base_high, lm_base_low, lm_base); - - if (lm_ctl & TSI148_LCSR_LMAT_EN) - enabled = 1; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A16) - *aspace |= VME_A16; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A24) - *aspace |= VME_A24; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A32) - *aspace |= VME_A32; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A64) - *aspace |= VME_A64; - - - if (lm_ctl & TSI148_LCSR_LMAT_SUPR) - *cycle |= VME_SUPER; - if (lm_ctl & TSI148_LCSR_LMAT_NPRIV) - *cycle |= VME_USER; - if (lm_ctl & TSI148_LCSR_LMAT_PGM) - *cycle |= VME_PROG; - if (lm_ctl & TSI148_LCSR_LMAT_DATA) - *cycle |= VME_DATA; - - mutex_unlock(&lm->mtx); - - return enabled; -} - -/* - * Attach a callback to a specific location monitor. - * - * Callback will be passed the monitor triggered. - */ -static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor, - void (*callback)(int)) -{ - u32 lm_ctl, tmp; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = lm->parent; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&lm->mtx); - - /* Ensure that the location monitor is configured - need PGM or DATA */ - lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); - if ((lm_ctl & (TSI148_LCSR_LMAT_PGM | TSI148_LCSR_LMAT_DATA)) == 0) { - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Location monitor not properly " - "configured\n"); - return -EINVAL; - } - - /* Check that a callback isn't already attached */ - if (bridge->lm_callback[monitor] != NULL) { - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Existing callback attached\n"); - return -EBUSY; - } - - /* Attach callback */ - bridge->lm_callback[monitor] = callback; - - /* Enable Location Monitor interrupt */ - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); - tmp |= TSI148_LCSR_INTEN_LMEN[monitor]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp |= TSI148_LCSR_INTEO_LMEO[monitor]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - /* Ensure that global Location Monitor Enable set */ - if ((lm_ctl & TSI148_LCSR_LMAT_EN) == 0) { - lm_ctl |= TSI148_LCSR_LMAT_EN; - iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); - } - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* - * Detach a callback function forn a specific location monitor. - */ -static int tsi148_lm_detach(struct vme_lm_resource *lm, int monitor) -{ - u32 lm_en, tmp; - struct tsi148_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - /* Disable Location Monitor and ensure previous interrupts are clear */ - lm_en = ioread32be(bridge->base + TSI148_LCSR_INTEN); - lm_en &= ~TSI148_LCSR_INTEN_LMEN[monitor]; - iowrite32be(lm_en, bridge->base + TSI148_LCSR_INTEN); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp &= ~TSI148_LCSR_INTEO_LMEO[monitor]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - iowrite32be(TSI148_LCSR_INTC_LMC[monitor], - bridge->base + TSI148_LCSR_INTC); - - /* Detach callback */ - bridge->lm_callback[monitor] = NULL; - - /* If all location monitors disabled, disable global Location Monitor */ - if ((lm_en & (TSI148_LCSR_INTS_LM0S | TSI148_LCSR_INTS_LM1S | - TSI148_LCSR_INTS_LM2S | TSI148_LCSR_INTS_LM3S)) == 0) { - tmp = ioread32be(bridge->base + TSI148_LCSR_LMAT); - tmp &= ~TSI148_LCSR_LMAT_EN; - iowrite32be(tmp, bridge->base + TSI148_LCSR_LMAT); - } - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* - * Determine Geographical Addressing - */ -static int tsi148_slot_get(struct vme_bridge *tsi148_bridge) -{ - u32 slot = 0; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - if (!geoid) { - slot = ioread32be(bridge->base + TSI148_LCSR_VSTAT); - slot = slot & TSI148_LCSR_VSTAT_GA_M; - } else - slot = geoid; - - return (int)slot; -} - -void *tsi148_alloc_consistent(struct device *parent, size_t size, - dma_addr_t *dma) -{ - struct pci_dev *pdev; - - /* Find pci_dev container of dev */ - pdev = container_of(parent, struct pci_dev, dev); - - return pci_alloc_consistent(pdev, size, dma); -} - -void tsi148_free_consistent(struct device *parent, size_t size, void *vaddr, - dma_addr_t dma) -{ - struct pci_dev *pdev; - - /* Find pci_dev container of dev */ - pdev = container_of(parent, struct pci_dev, dev); - - pci_free_consistent(pdev, size, vaddr, dma); -} - -static int __init tsi148_init(void) -{ - return pci_register_driver(&tsi148_driver); -} - -/* - * Configure CR/CSR space - * - * Access to the CR/CSR can be configured at power-up. The location of the - * CR/CSR registers in the CR/CSR address space is determined by the boards - * Auto-ID or Geographic address. This function ensures that the window is - * enabled at an offset consistent with the boards geopgraphic address. - * - * Each board has a 512kB window, with the highest 4kB being used for the - * boards registers, this means there is a fix length 508kB window which must - * be mapped onto PCI memory. - */ -static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge, - struct pci_dev *pdev) -{ - u32 cbar, crat, vstat; - u32 crcsr_bus_high, crcsr_bus_low; - int retval; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - /* Allocate mem for CR/CSR image */ - bridge->crcsr_kernel = pci_alloc_consistent(pdev, VME_CRCSR_BUF_SIZE, - &bridge->crcsr_bus); - if (bridge->crcsr_kernel == NULL) { - dev_err(tsi148_bridge->parent, "Failed to allocate memory for " - "CR/CSR image\n"); - return -ENOMEM; - } - - memset(bridge->crcsr_kernel, 0, VME_CRCSR_BUF_SIZE); - - reg_split(bridge->crcsr_bus, &crcsr_bus_high, &crcsr_bus_low); - - iowrite32be(crcsr_bus_high, bridge->base + TSI148_LCSR_CROU); - iowrite32be(crcsr_bus_low, bridge->base + TSI148_LCSR_CROL); - - /* Ensure that the CR/CSR is configured at the correct offset */ - cbar = ioread32be(bridge->base + TSI148_CBAR); - cbar = (cbar & TSI148_CRCSR_CBAR_M)>>3; - - vstat = tsi148_slot_get(tsi148_bridge); - - if (cbar != vstat) { - cbar = vstat; - dev_info(tsi148_bridge->parent, "Setting CR/CSR offset\n"); - iowrite32be(cbar<<3, bridge->base + TSI148_CBAR); - } - dev_info(tsi148_bridge->parent, "CR/CSR Offset: %d\n", cbar); - - crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); - if (crat & TSI148_LCSR_CRAT_EN) { - dev_info(tsi148_bridge->parent, "Enabling CR/CSR space\n"); - iowrite32be(crat | TSI148_LCSR_CRAT_EN, - bridge->base + TSI148_LCSR_CRAT); - } else - dev_info(tsi148_bridge->parent, "CR/CSR already enabled\n"); - - /* If we want flushed, error-checked writes, set up a window - * over the CR/CSR registers. We read from here to safely flush - * through VME writes. - */ - if (err_chk) { - retval = tsi148_master_set(bridge->flush_image, 1, - (vstat * 0x80000), 0x80000, VME_CRCSR, VME_SCT, - VME_D16); - if (retval) - dev_err(tsi148_bridge->parent, "Configuring flush image" - " failed\n"); - } - - return 0; - -} - -static void tsi148_crcsr_exit(struct vme_bridge *tsi148_bridge, - struct pci_dev *pdev) -{ - u32 crat; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - /* Turn off CR/CSR space */ - crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); - iowrite32be(crat & ~TSI148_LCSR_CRAT_EN, - bridge->base + TSI148_LCSR_CRAT); - - /* Free image */ - iowrite32be(0, bridge->base + TSI148_LCSR_CROU); - iowrite32be(0, bridge->base + TSI148_LCSR_CROL); - - pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel, - bridge->crcsr_bus); -} - -static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - int retval, i, master_num; - u32 data; - struct list_head *pos = NULL; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *tsi148_device; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - struct vme_dma_resource *dma_ctrlr; - struct vme_lm_resource *lm; - - /* If we want to support more than one of each bridge, we need to - * dynamically generate this so we get one per device - */ - tsi148_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL); - if (tsi148_bridge == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for device " - "structure\n"); - retval = -ENOMEM; - goto err_struct; - } - - tsi148_device = kzalloc(sizeof(struct tsi148_driver), GFP_KERNEL); - if (tsi148_device == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for device " - "structure\n"); - retval = -ENOMEM; - goto err_driver; - } - - tsi148_bridge->driver_priv = tsi148_device; - - /* Enable the device */ - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "Unable to enable device\n"); - goto err_enable; - } - - /* Map Registers */ - retval = pci_request_regions(pdev, driver_name); - if (retval) { - dev_err(&pdev->dev, "Unable to reserve resources\n"); - goto err_resource; - } - - /* map registers in BAR 0 */ - tsi148_device->base = ioremap_nocache(pci_resource_start(pdev, 0), - 4096); - if (!tsi148_device->base) { - dev_err(&pdev->dev, "Unable to remap CRG region\n"); - retval = -EIO; - goto err_remap; - } - - /* Check to see if the mapping worked out */ - data = ioread32(tsi148_device->base + TSI148_PCFS_ID) & 0x0000FFFF; - if (data != PCI_VENDOR_ID_TUNDRA) { - dev_err(&pdev->dev, "CRG region check failed\n"); - retval = -EIO; - goto err_test; - } - - /* Initialize wait queues & mutual exclusion flags */ - init_waitqueue_head(&tsi148_device->dma_queue[0]); - init_waitqueue_head(&tsi148_device->dma_queue[1]); - init_waitqueue_head(&tsi148_device->iack_queue); - mutex_init(&tsi148_device->vme_int); - mutex_init(&tsi148_device->vme_rmw); - - tsi148_bridge->parent = &pdev->dev; - strcpy(tsi148_bridge->name, driver_name); - - /* Setup IRQ */ - retval = tsi148_irq_init(tsi148_bridge); - if (retval != 0) { - dev_err(&pdev->dev, "Chip Initialization failed.\n"); - goto err_irq; - } - - /* If we are going to flush writes, we need to read from the VME bus. - * We need to do this safely, thus we read the devices own CR/CSR - * register. To do this we must set up a window in CR/CSR space and - * hence have one less master window resource available. - */ - master_num = TSI148_MAX_MASTER; - if (err_chk) { - master_num--; - - tsi148_device->flush_image = - kmalloc(sizeof(struct vme_master_resource), GFP_KERNEL); - if (tsi148_device->flush_image == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "flush resource structure\n"); - retval = -ENOMEM; - goto err_master; - } - tsi148_device->flush_image->parent = tsi148_bridge; - spin_lock_init(&tsi148_device->flush_image->lock); - tsi148_device->flush_image->locked = 1; - tsi148_device->flush_image->number = master_num; - tsi148_device->flush_image->address_attr = VME_A16 | VME_A24 | - VME_A32 | VME_A64; - tsi148_device->flush_image->cycle_attr = VME_SCT | VME_BLT | - VME_MBLT | VME_2eVME | VME_2eSST | VME_2eSSTB | - VME_2eSST160 | VME_2eSST267 | VME_2eSST320 | VME_SUPER | - VME_USER | VME_PROG | VME_DATA; - tsi148_device->flush_image->width_attr = VME_D16 | VME_D32; - memset(&tsi148_device->flush_image->bus_resource, 0, - sizeof(struct resource)); - tsi148_device->flush_image->kern_base = NULL; - } - - /* Add master windows to list */ - INIT_LIST_HEAD(&tsi148_bridge->master_resources); - for (i = 0; i < master_num; i++) { - master_image = kmalloc(sizeof(struct vme_master_resource), - GFP_KERNEL); - if (master_image == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "master resource structure\n"); - retval = -ENOMEM; - goto err_master; - } - master_image->parent = tsi148_bridge; - spin_lock_init(&master_image->lock); - master_image->locked = 0; - master_image->number = i; - master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64; - master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | - VME_PROG | VME_DATA; - master_image->width_attr = VME_D16 | VME_D32; - memset(&master_image->bus_resource, 0, - sizeof(struct resource)); - master_image->kern_base = NULL; - list_add_tail(&master_image->list, - &tsi148_bridge->master_resources); - } - - /* Add slave windows to list */ - INIT_LIST_HEAD(&tsi148_bridge->slave_resources); - for (i = 0; i < TSI148_MAX_SLAVE; i++) { - slave_image = kmalloc(sizeof(struct vme_slave_resource), - GFP_KERNEL); - if (slave_image == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "slave resource structure\n"); - retval = -ENOMEM; - goto err_slave; - } - slave_image->parent = tsi148_bridge; - mutex_init(&slave_image->mtx); - slave_image->locked = 0; - slave_image->number = i; - slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | - VME_USER3 | VME_USER4; - slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | - VME_PROG | VME_DATA; - list_add_tail(&slave_image->list, - &tsi148_bridge->slave_resources); - } - - /* Add dma engines to list */ - INIT_LIST_HEAD(&tsi148_bridge->dma_resources); - for (i = 0; i < TSI148_MAX_DMA; i++) { - dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource), - GFP_KERNEL); - if (dma_ctrlr == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "dma resource structure\n"); - retval = -ENOMEM; - goto err_dma; - } - dma_ctrlr->parent = tsi148_bridge; - mutex_init(&dma_ctrlr->mtx); - dma_ctrlr->locked = 0; - dma_ctrlr->number = i; - dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM | - VME_DMA_MEM_TO_VME | VME_DMA_VME_TO_VME | - VME_DMA_MEM_TO_MEM | VME_DMA_PATTERN_TO_VME | - VME_DMA_PATTERN_TO_MEM; - INIT_LIST_HEAD(&dma_ctrlr->pending); - INIT_LIST_HEAD(&dma_ctrlr->running); - list_add_tail(&dma_ctrlr->list, - &tsi148_bridge->dma_resources); - } - - /* Add location monitor to list */ - INIT_LIST_HEAD(&tsi148_bridge->lm_resources); - lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); - if (lm == NULL) { - dev_err(&pdev->dev, "Failed to allocate memory for " - "location monitor resource structure\n"); - retval = -ENOMEM; - goto err_lm; - } - lm->parent = tsi148_bridge; - mutex_init(&lm->mtx); - lm->locked = 0; - lm->number = 1; - lm->monitors = 4; - list_add_tail(&lm->list, &tsi148_bridge->lm_resources); - - tsi148_bridge->slave_get = tsi148_slave_get; - tsi148_bridge->slave_set = tsi148_slave_set; - tsi148_bridge->master_get = tsi148_master_get; - tsi148_bridge->master_set = tsi148_master_set; - tsi148_bridge->master_read = tsi148_master_read; - tsi148_bridge->master_write = tsi148_master_write; - tsi148_bridge->master_rmw = tsi148_master_rmw; - tsi148_bridge->dma_list_add = tsi148_dma_list_add; - tsi148_bridge->dma_list_exec = tsi148_dma_list_exec; - tsi148_bridge->dma_list_empty = tsi148_dma_list_empty; - tsi148_bridge->irq_set = tsi148_irq_set; - tsi148_bridge->irq_generate = tsi148_irq_generate; - tsi148_bridge->lm_set = tsi148_lm_set; - tsi148_bridge->lm_get = tsi148_lm_get; - tsi148_bridge->lm_attach = tsi148_lm_attach; - tsi148_bridge->lm_detach = tsi148_lm_detach; - tsi148_bridge->slot_get = tsi148_slot_get; - tsi148_bridge->alloc_consistent = tsi148_alloc_consistent; - tsi148_bridge->free_consistent = tsi148_free_consistent; - - data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); - dev_info(&pdev->dev, "Board is%s the VME system controller\n", - (data & TSI148_LCSR_VSTAT_SCONS) ? "" : " not"); - if (!geoid) - dev_info(&pdev->dev, "VME geographical address is %d\n", - data & TSI148_LCSR_VSTAT_GA_M); - else - dev_info(&pdev->dev, "VME geographical address is set to %d\n", - geoid); - - dev_info(&pdev->dev, "VME Write and flush and error check is %s\n", - err_chk ? "enabled" : "disabled"); - - if (tsi148_crcsr_init(tsi148_bridge, pdev)) { - dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); - goto err_crcsr; - } - - retval = vme_register_bridge(tsi148_bridge); - if (retval != 0) { - dev_err(&pdev->dev, "Chip Registration failed.\n"); - goto err_reg; - } - - pci_set_drvdata(pdev, tsi148_bridge); - - /* Clear VME bus "board fail", and "power-up reset" lines */ - data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); - data &= ~TSI148_LCSR_VSTAT_BRDFL; - data |= TSI148_LCSR_VSTAT_CPURST; - iowrite32be(data, tsi148_device->base + TSI148_LCSR_VSTAT); - - return 0; - -err_reg: - tsi148_crcsr_exit(tsi148_bridge, pdev); -err_crcsr: -err_lm: - /* resources are stored in link list */ - list_for_each(pos, &tsi148_bridge->lm_resources) { - lm = list_entry(pos, struct vme_lm_resource, list); - list_del(pos); - kfree(lm); - } -err_dma: - /* resources are stored in link list */ - list_for_each(pos, &tsi148_bridge->dma_resources) { - dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); - list_del(pos); - kfree(dma_ctrlr); - } -err_slave: - /* resources are stored in link list */ - list_for_each(pos, &tsi148_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } -err_master: - /* resources are stored in link list */ - list_for_each(pos, &tsi148_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - tsi148_irq_exit(tsi148_bridge, pdev); -err_irq: -err_test: - iounmap(tsi148_device->base); -err_remap: - pci_release_regions(pdev); -err_resource: - pci_disable_device(pdev); -err_enable: - kfree(tsi148_device); -err_driver: - kfree(tsi148_bridge); -err_struct: - return retval; - -} - -static void tsi148_remove(struct pci_dev *pdev) -{ - struct list_head *pos = NULL; - struct list_head *tmplist; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - struct vme_dma_resource *dma_ctrlr; - int i; - struct tsi148_driver *bridge; - struct vme_bridge *tsi148_bridge = pci_get_drvdata(pdev); - - bridge = tsi148_bridge->driver_priv; - - - dev_dbg(&pdev->dev, "Driver is being unloaded.\n"); - - /* - * Shutdown all inbound and outbound windows. - */ - for (i = 0; i < 8; i++) { - iowrite32be(0, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - iowrite32be(0, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - } - - /* - * Shutdown Location monitor. - */ - iowrite32be(0, bridge->base + TSI148_LCSR_LMAT); - - /* - * Shutdown CRG map. - */ - iowrite32be(0, bridge->base + TSI148_LCSR_CSRAT); - - /* - * Clear error status. - */ - iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_EDPAT); - iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_VEAT); - iowrite32be(0x07000700, bridge->base + TSI148_LCSR_PSTAT); - - /* - * Remove VIRQ interrupt (if any) - */ - if (ioread32be(bridge->base + TSI148_LCSR_VICR) & 0x800) - iowrite32be(0x8000, bridge->base + TSI148_LCSR_VICR); - - /* - * Map all Interrupts to PCI INTA - */ - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM1); - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM2); - - tsi148_irq_exit(tsi148_bridge, pdev); - - vme_unregister_bridge(tsi148_bridge); - - tsi148_crcsr_exit(tsi148_bridge, pdev); - - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &tsi148_bridge->dma_resources) { - dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); - list_del(pos); - kfree(dma_ctrlr); - } - - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &tsi148_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } - - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &tsi148_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - iounmap(bridge->base); - - pci_release_regions(pdev); - - pci_disable_device(pdev); - - kfree(tsi148_bridge->driver_priv); - - kfree(tsi148_bridge); -} - -static void __exit tsi148_exit(void) -{ - pci_unregister_driver(&tsi148_driver); -} - -MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes"); -module_param(err_chk, bool, 0); - -MODULE_PARM_DESC(geoid, "Override geographical addressing"); -module_param(geoid, int, 0); - -MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge"); -MODULE_LICENSE("GPL"); - -module_init(tsi148_init); -module_exit(tsi148_exit); diff --git a/drivers/staging/vme/bridges/vme_tsi148.h b/drivers/staging/vme/bridges/vme_tsi148.h deleted file mode 100644 index a3ac2fe98816..000000000000 --- a/drivers/staging/vme/bridges/vme_tsi148.h +++ /dev/null @@ -1,1409 +0,0 @@ -/* - * tsi148.h - * - * Support for the Tundra TSI148 VME Bridge chip - * - * Author: Tom Armistead - * Updated and maintained by Ajit Prem - * Copyright 2004 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef TSI148_H -#define TSI148_H - -#ifndef PCI_VENDOR_ID_TUNDRA -#define PCI_VENDOR_ID_TUNDRA 0x10e3 -#endif - -#ifndef PCI_DEVICE_ID_TUNDRA_TSI148 -#define PCI_DEVICE_ID_TUNDRA_TSI148 0x148 -#endif - -/* - * Define the number of each that the Tsi148 supports. - */ -#define TSI148_MAX_MASTER 8 /* Max Master Windows */ -#define TSI148_MAX_SLAVE 8 /* Max Slave Windows */ -#define TSI148_MAX_DMA 2 /* Max DMA Controllers */ -#define TSI148_MAX_MAILBOX 4 /* Max Mail Box registers */ -#define TSI148_MAX_SEMAPHORE 8 /* Max Semaphores */ - -/* Structure used to hold driver specific information */ -struct tsi148_driver { - void __iomem *base; /* Base Address of device registers */ - wait_queue_head_t dma_queue[2]; - wait_queue_head_t iack_queue; - void (*lm_callback[4])(int); /* Called in interrupt handler */ - void *crcsr_kernel; - dma_addr_t crcsr_bus; - struct vme_master_resource *flush_image; - struct mutex vme_rmw; /* Only one RMW cycle at a time */ - struct mutex vme_int; /* - * Only one VME interrupt can be - * generated at a time, provide locking - */ -}; - -/* - * Layout of a DMAC Linked-List Descriptor - * - * Note: This structure is accessed via the chip and therefore must be - * correctly laid out - It must also be aligned on 64-bit boundaries. - */ -struct tsi148_dma_descriptor { - u32 dsau; /* Source Address */ - u32 dsal; - u32 ddau; /* Destination Address */ - u32 ddal; - u32 dsat; /* Source attributes */ - u32 ddat; /* Destination attributes */ - u32 dnlau; /* Next link address */ - u32 dnlal; - u32 dcnt; /* Byte count */ - u32 ddbs; /* 2eSST Broadcast select */ -}; - -struct tsi148_dma_entry { - /* - * The descriptor needs to be aligned on a 64-bit boundary, we increase - * the chance of this by putting it first in the structure. - */ - struct tsi148_dma_descriptor descriptor; - struct list_head list; -}; - -/* - * TSI148 ASIC register structure overlays and bit field definitions. - * - * Note: Tsi148 Register Group (CRG) consists of the following - * combination of registers: - * PCFS - PCI Configuration Space Registers - * LCSR - Local Control and Status Registers - * GCSR - Global Control and Status Registers - * CR/CSR - Subset of Configuration ROM / - * Control and Status Registers - */ - - -/* - * Command/Status Registers (CRG + $004) - */ -#define TSI148_PCFS_ID 0x0 -#define TSI148_PCFS_CSR 0x4 -#define TSI148_PCFS_CLASS 0x8 -#define TSI148_PCFS_MISC0 0xC -#define TSI148_PCFS_MBARL 0x10 -#define TSI148_PCFS_MBARU 0x14 - -#define TSI148_PCFS_SUBID 0x28 - -#define TSI148_PCFS_CAPP 0x34 - -#define TSI148_PCFS_MISC1 0x3C - -#define TSI148_PCFS_XCAPP 0x40 -#define TSI148_PCFS_XSTAT 0x44 - -/* - * LCSR definitions - */ - -/* - * Outbound Translations - */ -#define TSI148_LCSR_OT0_OTSAU 0x100 -#define TSI148_LCSR_OT0_OTSAL 0x104 -#define TSI148_LCSR_OT0_OTEAU 0x108 -#define TSI148_LCSR_OT0_OTEAL 0x10C -#define TSI148_LCSR_OT0_OTOFU 0x110 -#define TSI148_LCSR_OT0_OTOFL 0x114 -#define TSI148_LCSR_OT0_OTBS 0x118 -#define TSI148_LCSR_OT0_OTAT 0x11C - -#define TSI148_LCSR_OT1_OTSAU 0x120 -#define TSI148_LCSR_OT1_OTSAL 0x124 -#define TSI148_LCSR_OT1_OTEAU 0x128 -#define TSI148_LCSR_OT1_OTEAL 0x12C -#define TSI148_LCSR_OT1_OTOFU 0x130 -#define TSI148_LCSR_OT1_OTOFL 0x134 -#define TSI148_LCSR_OT1_OTBS 0x138 -#define TSI148_LCSR_OT1_OTAT 0x13C - -#define TSI148_LCSR_OT2_OTSAU 0x140 -#define TSI148_LCSR_OT2_OTSAL 0x144 -#define TSI148_LCSR_OT2_OTEAU 0x148 -#define TSI148_LCSR_OT2_OTEAL 0x14C -#define TSI148_LCSR_OT2_OTOFU 0x150 -#define TSI148_LCSR_OT2_OTOFL 0x154 -#define TSI148_LCSR_OT2_OTBS 0x158 -#define TSI148_LCSR_OT2_OTAT 0x15C - -#define TSI148_LCSR_OT3_OTSAU 0x160 -#define TSI148_LCSR_OT3_OTSAL 0x164 -#define TSI148_LCSR_OT3_OTEAU 0x168 -#define TSI148_LCSR_OT3_OTEAL 0x16C -#define TSI148_LCSR_OT3_OTOFU 0x170 -#define TSI148_LCSR_OT3_OTOFL 0x174 -#define TSI148_LCSR_OT3_OTBS 0x178 -#define TSI148_LCSR_OT3_OTAT 0x17C - -#define TSI148_LCSR_OT4_OTSAU 0x180 -#define TSI148_LCSR_OT4_OTSAL 0x184 -#define TSI148_LCSR_OT4_OTEAU 0x188 -#define TSI148_LCSR_OT4_OTEAL 0x18C -#define TSI148_LCSR_OT4_OTOFU 0x190 -#define TSI148_LCSR_OT4_OTOFL 0x194 -#define TSI148_LCSR_OT4_OTBS 0x198 -#define TSI148_LCSR_OT4_OTAT 0x19C - -#define TSI148_LCSR_OT5_OTSAU 0x1A0 -#define TSI148_LCSR_OT5_OTSAL 0x1A4 -#define TSI148_LCSR_OT5_OTEAU 0x1A8 -#define TSI148_LCSR_OT5_OTEAL 0x1AC -#define TSI148_LCSR_OT5_OTOFU 0x1B0 -#define TSI148_LCSR_OT5_OTOFL 0x1B4 -#define TSI148_LCSR_OT5_OTBS 0x1B8 -#define TSI148_LCSR_OT5_OTAT 0x1BC - -#define TSI148_LCSR_OT6_OTSAU 0x1C0 -#define TSI148_LCSR_OT6_OTSAL 0x1C4 -#define TSI148_LCSR_OT6_OTEAU 0x1C8 -#define TSI148_LCSR_OT6_OTEAL 0x1CC -#define TSI148_LCSR_OT6_OTOFU 0x1D0 -#define TSI148_LCSR_OT6_OTOFL 0x1D4 -#define TSI148_LCSR_OT6_OTBS 0x1D8 -#define TSI148_LCSR_OT6_OTAT 0x1DC - -#define TSI148_LCSR_OT7_OTSAU 0x1E0 -#define TSI148_LCSR_OT7_OTSAL 0x1E4 -#define TSI148_LCSR_OT7_OTEAU 0x1E8 -#define TSI148_LCSR_OT7_OTEAL 0x1EC -#define TSI148_LCSR_OT7_OTOFU 0x1F0 -#define TSI148_LCSR_OT7_OTOFL 0x1F4 -#define TSI148_LCSR_OT7_OTBS 0x1F8 -#define TSI148_LCSR_OT7_OTAT 0x1FC - -#define TSI148_LCSR_OT0 0x100 -#define TSI148_LCSR_OT1 0x120 -#define TSI148_LCSR_OT2 0x140 -#define TSI148_LCSR_OT3 0x160 -#define TSI148_LCSR_OT4 0x180 -#define TSI148_LCSR_OT5 0x1A0 -#define TSI148_LCSR_OT6 0x1C0 -#define TSI148_LCSR_OT7 0x1E0 - -static const int TSI148_LCSR_OT[8] = { TSI148_LCSR_OT0, TSI148_LCSR_OT1, - TSI148_LCSR_OT2, TSI148_LCSR_OT3, - TSI148_LCSR_OT4, TSI148_LCSR_OT5, - TSI148_LCSR_OT6, TSI148_LCSR_OT7 }; - -#define TSI148_LCSR_OFFSET_OTSAU 0x0 -#define TSI148_LCSR_OFFSET_OTSAL 0x4 -#define TSI148_LCSR_OFFSET_OTEAU 0x8 -#define TSI148_LCSR_OFFSET_OTEAL 0xC -#define TSI148_LCSR_OFFSET_OTOFU 0x10 -#define TSI148_LCSR_OFFSET_OTOFL 0x14 -#define TSI148_LCSR_OFFSET_OTBS 0x18 -#define TSI148_LCSR_OFFSET_OTAT 0x1C - -/* - * VMEbus interrupt ack - * offset 200 - */ -#define TSI148_LCSR_VIACK1 0x204 -#define TSI148_LCSR_VIACK2 0x208 -#define TSI148_LCSR_VIACK3 0x20C -#define TSI148_LCSR_VIACK4 0x210 -#define TSI148_LCSR_VIACK5 0x214 -#define TSI148_LCSR_VIACK6 0x218 -#define TSI148_LCSR_VIACK7 0x21C - -static const int TSI148_LCSR_VIACK[8] = { 0, TSI148_LCSR_VIACK1, - TSI148_LCSR_VIACK2, TSI148_LCSR_VIACK3, - TSI148_LCSR_VIACK4, TSI148_LCSR_VIACK5, - TSI148_LCSR_VIACK6, TSI148_LCSR_VIACK7 }; - -/* - * RMW - * offset 220 - */ -#define TSI148_LCSR_RMWAU 0x220 -#define TSI148_LCSR_RMWAL 0x224 -#define TSI148_LCSR_RMWEN 0x228 -#define TSI148_LCSR_RMWC 0x22C -#define TSI148_LCSR_RMWS 0x230 - -/* - * VMEbus control - * offset 234 - */ -#define TSI148_LCSR_VMCTRL 0x234 -#define TSI148_LCSR_VCTRL 0x238 -#define TSI148_LCSR_VSTAT 0x23C - -/* - * PCI status - * offset 240 - */ -#define TSI148_LCSR_PSTAT 0x240 - -/* - * VME filter. - * offset 250 - */ -#define TSI148_LCSR_VMEFL 0x250 - - /* - * VME exception. - * offset 260 - */ -#define TSI148_LCSR_VEAU 0x260 -#define TSI148_LCSR_VEAL 0x264 -#define TSI148_LCSR_VEAT 0x268 - - /* - * PCI error - * offset 270 - */ -#define TSI148_LCSR_EDPAU 0x270 -#define TSI148_LCSR_EDPAL 0x274 -#define TSI148_LCSR_EDPXA 0x278 -#define TSI148_LCSR_EDPXS 0x27C -#define TSI148_LCSR_EDPAT 0x280 - - /* - * Inbound Translations - * offset 300 - */ -#define TSI148_LCSR_IT0_ITSAU 0x300 -#define TSI148_LCSR_IT0_ITSAL 0x304 -#define TSI148_LCSR_IT0_ITEAU 0x308 -#define TSI148_LCSR_IT0_ITEAL 0x30C -#define TSI148_LCSR_IT0_ITOFU 0x310 -#define TSI148_LCSR_IT0_ITOFL 0x314 -#define TSI148_LCSR_IT0_ITAT 0x318 - -#define TSI148_LCSR_IT1_ITSAU 0x320 -#define TSI148_LCSR_IT1_ITSAL 0x324 -#define TSI148_LCSR_IT1_ITEAU 0x328 -#define TSI148_LCSR_IT1_ITEAL 0x32C -#define TSI148_LCSR_IT1_ITOFU 0x330 -#define TSI148_LCSR_IT1_ITOFL 0x334 -#define TSI148_LCSR_IT1_ITAT 0x338 - -#define TSI148_LCSR_IT2_ITSAU 0x340 -#define TSI148_LCSR_IT2_ITSAL 0x344 -#define TSI148_LCSR_IT2_ITEAU 0x348 -#define TSI148_LCSR_IT2_ITEAL 0x34C -#define TSI148_LCSR_IT2_ITOFU 0x350 -#define TSI148_LCSR_IT2_ITOFL 0x354 -#define TSI148_LCSR_IT2_ITAT 0x358 - -#define TSI148_LCSR_IT3_ITSAU 0x360 -#define TSI148_LCSR_IT3_ITSAL 0x364 -#define TSI148_LCSR_IT3_ITEAU 0x368 -#define TSI148_LCSR_IT3_ITEAL 0x36C -#define TSI148_LCSR_IT3_ITOFU 0x370 -#define TSI148_LCSR_IT3_ITOFL 0x374 -#define TSI148_LCSR_IT3_ITAT 0x378 - -#define TSI148_LCSR_IT4_ITSAU 0x380 -#define TSI148_LCSR_IT4_ITSAL 0x384 -#define TSI148_LCSR_IT4_ITEAU 0x388 -#define TSI148_LCSR_IT4_ITEAL 0x38C -#define TSI148_LCSR_IT4_ITOFU 0x390 -#define TSI148_LCSR_IT4_ITOFL 0x394 -#define TSI148_LCSR_IT4_ITAT 0x398 - -#define TSI148_LCSR_IT5_ITSAU 0x3A0 -#define TSI148_LCSR_IT5_ITSAL 0x3A4 -#define TSI148_LCSR_IT5_ITEAU 0x3A8 -#define TSI148_LCSR_IT5_ITEAL 0x3AC -#define TSI148_LCSR_IT5_ITOFU 0x3B0 -#define TSI148_LCSR_IT5_ITOFL 0x3B4 -#define TSI148_LCSR_IT5_ITAT 0x3B8 - -#define TSI148_LCSR_IT6_ITSAU 0x3C0 -#define TSI148_LCSR_IT6_ITSAL 0x3C4 -#define TSI148_LCSR_IT6_ITEAU 0x3C8 -#define TSI148_LCSR_IT6_ITEAL 0x3CC -#define TSI148_LCSR_IT6_ITOFU 0x3D0 -#define TSI148_LCSR_IT6_ITOFL 0x3D4 -#define TSI148_LCSR_IT6_ITAT 0x3D8 - -#define TSI148_LCSR_IT7_ITSAU 0x3E0 -#define TSI148_LCSR_IT7_ITSAL 0x3E4 -#define TSI148_LCSR_IT7_ITEAU 0x3E8 -#define TSI148_LCSR_IT7_ITEAL 0x3EC -#define TSI148_LCSR_IT7_ITOFU 0x3F0 -#define TSI148_LCSR_IT7_ITOFL 0x3F4 -#define TSI148_LCSR_IT7_ITAT 0x3F8 - - -#define TSI148_LCSR_IT0 0x300 -#define TSI148_LCSR_IT1 0x320 -#define TSI148_LCSR_IT2 0x340 -#define TSI148_LCSR_IT3 0x360 -#define TSI148_LCSR_IT4 0x380 -#define TSI148_LCSR_IT5 0x3A0 -#define TSI148_LCSR_IT6 0x3C0 -#define TSI148_LCSR_IT7 0x3E0 - -static const int TSI148_LCSR_IT[8] = { TSI148_LCSR_IT0, TSI148_LCSR_IT1, - TSI148_LCSR_IT2, TSI148_LCSR_IT3, - TSI148_LCSR_IT4, TSI148_LCSR_IT5, - TSI148_LCSR_IT6, TSI148_LCSR_IT7 }; - -#define TSI148_LCSR_OFFSET_ITSAU 0x0 -#define TSI148_LCSR_OFFSET_ITSAL 0x4 -#define TSI148_LCSR_OFFSET_ITEAU 0x8 -#define TSI148_LCSR_OFFSET_ITEAL 0xC -#define TSI148_LCSR_OFFSET_ITOFU 0x10 -#define TSI148_LCSR_OFFSET_ITOFL 0x14 -#define TSI148_LCSR_OFFSET_ITAT 0x18 - - /* - * Inbound Translation GCSR - * offset 400 - */ -#define TSI148_LCSR_GBAU 0x400 -#define TSI148_LCSR_GBAL 0x404 -#define TSI148_LCSR_GCSRAT 0x408 - - /* - * Inbound Translation CRG - * offset 40C - */ -#define TSI148_LCSR_CBAU 0x40C -#define TSI148_LCSR_CBAL 0x410 -#define TSI148_LCSR_CSRAT 0x414 - - /* - * Inbound Translation CR/CSR - * CRG - * offset 418 - */ -#define TSI148_LCSR_CROU 0x418 -#define TSI148_LCSR_CROL 0x41C -#define TSI148_LCSR_CRAT 0x420 - - /* - * Inbound Translation Location Monitor - * offset 424 - */ -#define TSI148_LCSR_LMBAU 0x424 -#define TSI148_LCSR_LMBAL 0x428 -#define TSI148_LCSR_LMAT 0x42C - - /* - * VMEbus Interrupt Control. - * offset 430 - */ -#define TSI148_LCSR_BCU 0x430 -#define TSI148_LCSR_BCL 0x434 -#define TSI148_LCSR_BPGTR 0x438 -#define TSI148_LCSR_BPCTR 0x43C -#define TSI148_LCSR_VICR 0x440 - - /* - * Local Bus Interrupt Control. - * offset 448 - */ -#define TSI148_LCSR_INTEN 0x448 -#define TSI148_LCSR_INTEO 0x44C -#define TSI148_LCSR_INTS 0x450 -#define TSI148_LCSR_INTC 0x454 -#define TSI148_LCSR_INTM1 0x458 -#define TSI148_LCSR_INTM2 0x45C - - /* - * DMA Controllers - * offset 500 - */ -#define TSI148_LCSR_DCTL0 0x500 -#define TSI148_LCSR_DSTA0 0x504 -#define TSI148_LCSR_DCSAU0 0x508 -#define TSI148_LCSR_DCSAL0 0x50C -#define TSI148_LCSR_DCDAU0 0x510 -#define TSI148_LCSR_DCDAL0 0x514 -#define TSI148_LCSR_DCLAU0 0x518 -#define TSI148_LCSR_DCLAL0 0x51C -#define TSI148_LCSR_DSAU0 0x520 -#define TSI148_LCSR_DSAL0 0x524 -#define TSI148_LCSR_DDAU0 0x528 -#define TSI148_LCSR_DDAL0 0x52C -#define TSI148_LCSR_DSAT0 0x530 -#define TSI148_LCSR_DDAT0 0x534 -#define TSI148_LCSR_DNLAU0 0x538 -#define TSI148_LCSR_DNLAL0 0x53C -#define TSI148_LCSR_DCNT0 0x540 -#define TSI148_LCSR_DDBS0 0x544 - -#define TSI148_LCSR_DCTL1 0x580 -#define TSI148_LCSR_DSTA1 0x584 -#define TSI148_LCSR_DCSAU1 0x588 -#define TSI148_LCSR_DCSAL1 0x58C -#define TSI148_LCSR_DCDAU1 0x590 -#define TSI148_LCSR_DCDAL1 0x594 -#define TSI148_LCSR_DCLAU1 0x598 -#define TSI148_LCSR_DCLAL1 0x59C -#define TSI148_LCSR_DSAU1 0x5A0 -#define TSI148_LCSR_DSAL1 0x5A4 -#define TSI148_LCSR_DDAU1 0x5A8 -#define TSI148_LCSR_DDAL1 0x5AC -#define TSI148_LCSR_DSAT1 0x5B0 -#define TSI148_LCSR_DDAT1 0x5B4 -#define TSI148_LCSR_DNLAU1 0x5B8 -#define TSI148_LCSR_DNLAL1 0x5BC -#define TSI148_LCSR_DCNT1 0x5C0 -#define TSI148_LCSR_DDBS1 0x5C4 - -#define TSI148_LCSR_DMA0 0x500 -#define TSI148_LCSR_DMA1 0x580 - - -static const int TSI148_LCSR_DMA[TSI148_MAX_DMA] = { TSI148_LCSR_DMA0, - TSI148_LCSR_DMA1 }; - -#define TSI148_LCSR_OFFSET_DCTL 0x0 -#define TSI148_LCSR_OFFSET_DSTA 0x4 -#define TSI148_LCSR_OFFSET_DCSAU 0x8 -#define TSI148_LCSR_OFFSET_DCSAL 0xC -#define TSI148_LCSR_OFFSET_DCDAU 0x10 -#define TSI148_LCSR_OFFSET_DCDAL 0x14 -#define TSI148_LCSR_OFFSET_DCLAU 0x18 -#define TSI148_LCSR_OFFSET_DCLAL 0x1C -#define TSI148_LCSR_OFFSET_DSAU 0x20 -#define TSI148_LCSR_OFFSET_DSAL 0x24 -#define TSI148_LCSR_OFFSET_DDAU 0x28 -#define TSI148_LCSR_OFFSET_DDAL 0x2C -#define TSI148_LCSR_OFFSET_DSAT 0x30 -#define TSI148_LCSR_OFFSET_DDAT 0x34 -#define TSI148_LCSR_OFFSET_DNLAU 0x38 -#define TSI148_LCSR_OFFSET_DNLAL 0x3C -#define TSI148_LCSR_OFFSET_DCNT 0x40 -#define TSI148_LCSR_OFFSET_DDBS 0x44 - - /* - * GCSR Register Group - */ - - /* - * GCSR CRG - * offset 00 600 - DEVI/VENI - * offset 04 604 - CTRL/GA/REVID - * offset 08 608 - Semaphore3/2/1/0 - * offset 0C 60C - Seamphore7/6/5/4 - */ -#define TSI148_GCSR_ID 0x600 -#define TSI148_GCSR_CSR 0x604 -#define TSI148_GCSR_SEMA0 0x608 -#define TSI148_GCSR_SEMA1 0x60C - - /* - * Mail Box - * GCSR CRG - * offset 10 610 - Mailbox0 - */ -#define TSI148_GCSR_MBOX0 0x610 -#define TSI148_GCSR_MBOX1 0x614 -#define TSI148_GCSR_MBOX2 0x618 -#define TSI148_GCSR_MBOX3 0x61C - -static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0, - TSI148_GCSR_MBOX1, - TSI148_GCSR_MBOX2, - TSI148_GCSR_MBOX3 }; - - /* - * CR/CSR - */ - - /* - * CR/CSR CRG - * offset 7FFF4 FF4 - CSRBCR - * offset 7FFF8 FF8 - CSRBSR - * offset 7FFFC FFC - CBAR - */ -#define TSI148_CSRBCR 0xFF4 -#define TSI148_CSRBSR 0xFF8 -#define TSI148_CBAR 0xFFC - - - - - /* - * TSI148 Register Bit Definitions - */ - - /* - * PFCS Register Set - */ -#define TSI148_PCFS_CMMD_SERR (1<<8) /* SERR_L out pin ssys err */ -#define TSI148_PCFS_CMMD_PERR (1<<6) /* PERR_L out pin parity */ -#define TSI148_PCFS_CMMD_MSTR (1<<2) /* PCI bus master */ -#define TSI148_PCFS_CMMD_MEMSP (1<<1) /* PCI mem space access */ -#define TSI148_PCFS_CMMD_IOSP (1<<0) /* PCI I/O space enable */ - -#define TSI148_PCFS_STAT_RCPVE (1<<15) /* Detected Parity Error */ -#define TSI148_PCFS_STAT_SIGSE (1<<14) /* Signalled System Error */ -#define TSI148_PCFS_STAT_RCVMA (1<<13) /* Received Master Abort */ -#define TSI148_PCFS_STAT_RCVTA (1<<12) /* Received Target Abort */ -#define TSI148_PCFS_STAT_SIGTA (1<<11) /* Signalled Target Abort */ -#define TSI148_PCFS_STAT_SELTIM (3<<9) /* DELSEL Timing */ -#define TSI148_PCFS_STAT_DPAR (1<<8) /* Data Parity Err Reported */ -#define TSI148_PCFS_STAT_FAST (1<<7) /* Fast back-to-back Cap */ -#define TSI148_PCFS_STAT_P66M (1<<5) /* 66 MHz Capable */ -#define TSI148_PCFS_STAT_CAPL (1<<4) /* Capab List - address $34 */ - -/* - * Revision ID/Class Code Registers (CRG +$008) - */ -#define TSI148_PCFS_CLAS_M (0xFF<<24) /* Class ID */ -#define TSI148_PCFS_SUBCLAS_M (0xFF<<16) /* Sub-Class ID */ -#define TSI148_PCFS_PROGIF_M (0xFF<<8) /* Sub-Class ID */ -#define TSI148_PCFS_REVID_M (0xFF<<0) /* Rev ID */ - -/* - * Cache Line Size/ Master Latency Timer/ Header Type Registers (CRG + $00C) - */ -#define TSI148_PCFS_HEAD_M (0xFF<<16) /* Master Lat Timer */ -#define TSI148_PCFS_MLAT_M (0xFF<<8) /* Master Lat Timer */ -#define TSI148_PCFS_CLSZ_M (0xFF<<0) /* Cache Line Size */ - -/* - * Memory Base Address Lower Reg (CRG + $010) - */ -#define TSI148_PCFS_MBARL_BASEL_M (0xFFFFF<<12) /* Base Addr Lower Mask */ -#define TSI148_PCFS_MBARL_PRE (1<<3) /* Prefetch */ -#define TSI148_PCFS_MBARL_MTYPE_M (3<<1) /* Memory Type Mask */ -#define TSI148_PCFS_MBARL_IOMEM (1<<0) /* I/O Space Indicator */ - -/* - * Message Signaled Interrupt Capabilities Register (CRG + $040) - */ -#define TSI148_PCFS_MSICAP_64BAC (1<<7) /* 64-bit Address Capable */ -#define TSI148_PCFS_MSICAP_MME_M (7<<4) /* Multiple Msg Enable Mask */ -#define TSI148_PCFS_MSICAP_MMC_M (7<<1) /* Multiple Msg Capable Mask */ -#define TSI148_PCFS_MSICAP_MSIEN (1<<0) /* Msg signaled INT Enable */ - -/* - * Message Address Lower Register (CRG +$044) - */ -#define TSI148_PCFS_MSIAL_M (0x3FFFFFFF<<2) /* Mask */ - -/* - * Message Data Register (CRG + 4C) - */ -#define TSI148_PCFS_MSIMD_M (0xFFFF<<0) /* Mask */ - -/* - * PCI-X Capabilities Register (CRG + $050) - */ -#define TSI148_PCFS_PCIXCAP_MOST_M (7<<4) /* Max outstanding Split Tran */ -#define TSI148_PCFS_PCIXCAP_MMRBC_M (3<<2) /* Max Mem Read byte cnt */ -#define TSI148_PCFS_PCIXCAP_ERO (1<<1) /* Enable Relaxed Ordering */ -#define TSI148_PCFS_PCIXCAP_DPERE (1<<0) /* Data Parity Recover Enable */ - -/* - * PCI-X Status Register (CRG +$054) - */ -#define TSI148_PCFS_PCIXSTAT_RSCEM (1<<29) /* Received Split Comp Error */ -#define TSI148_PCFS_PCIXSTAT_DMCRS_M (7<<26) /* max Cumulative Read Size */ -#define TSI148_PCFS_PCIXSTAT_DMOST_M (7<<23) /* max outstanding Split Trans - */ -#define TSI148_PCFS_PCIXSTAT_DMMRC_M (3<<21) /* max mem read byte count */ -#define TSI148_PCFS_PCIXSTAT_DC (1<<20) /* Device Complexity */ -#define TSI148_PCFS_PCIXSTAT_USC (1<<19) /* Unexpected Split comp */ -#define TSI148_PCFS_PCIXSTAT_SCD (1<<18) /* Split completion discard */ -#define TSI148_PCFS_PCIXSTAT_133C (1<<17) /* 133MHz capable */ -#define TSI148_PCFS_PCIXSTAT_64D (1<<16) /* 64 bit device */ -#define TSI148_PCFS_PCIXSTAT_BN_M (0xFF<<8) /* Bus number */ -#define TSI148_PCFS_PCIXSTAT_DN_M (0x1F<<3) /* Device number */ -#define TSI148_PCFS_PCIXSTAT_FN_M (7<<0) /* Function Number */ - -/* - * LCSR Registers - */ - -/* - * Outbound Translation Starting Address Lower - */ -#define TSI148_LCSR_OTSAL_M (0xFFFF<<16) /* Mask */ - -/* - * Outbound Translation Ending Address Lower - */ -#define TSI148_LCSR_OTEAL_M (0xFFFF<<16) /* Mask */ - -/* - * Outbound Translation Offset Lower - */ -#define TSI148_LCSR_OTOFFL_M (0xFFFF<<16) /* Mask */ - -/* - * Outbound Translation 2eSST Broadcast Select - */ -#define TSI148_LCSR_OTBS_M (0xFFFFF<<0) /* Mask */ - -/* - * Outbound Translation Attribute - */ -#define TSI148_LCSR_OTAT_EN (1<<31) /* Window Enable */ -#define TSI148_LCSR_OTAT_MRPFD (1<<18) /* Prefetch Disable */ - -#define TSI148_LCSR_OTAT_PFS_M (3<<16) /* Prefetch Size Mask */ -#define TSI148_LCSR_OTAT_PFS_2 (0<<16) /* 2 Cache Lines P Size */ -#define TSI148_LCSR_OTAT_PFS_4 (1<<16) /* 4 Cache Lines P Size */ -#define TSI148_LCSR_OTAT_PFS_8 (2<<16) /* 8 Cache Lines P Size */ -#define TSI148_LCSR_OTAT_PFS_16 (3<<16) /* 16 Cache Lines P Size */ - -#define TSI148_LCSR_OTAT_2eSSTM_M (7<<11) /* 2eSST Xfer Rate Mask */ -#define TSI148_LCSR_OTAT_2eSSTM_160 (0<<11) /* 160MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_OTAT_2eSSTM_267 (1<<11) /* 267MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_OTAT_2eSSTM_320 (2<<11) /* 320MB/s 2eSST Xfer Rate */ - -#define TSI148_LCSR_OTAT_TM_M (7<<8) /* Xfer Protocol Mask */ -#define TSI148_LCSR_OTAT_TM_SCT (0<<8) /* SCT Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_BLT (1<<8) /* BLT Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_MBLT (2<<8) /* MBLT Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_2eVME (3<<8) /* 2eVME Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_2eSST (4<<8) /* 2eSST Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_2eSSTB (5<<8) /* 2eSST Bcast Xfer Protocol */ - -#define TSI148_LCSR_OTAT_DBW_M (3<<6) /* Max Data Width */ -#define TSI148_LCSR_OTAT_DBW_16 (0<<6) /* 16-bit Data Width */ -#define TSI148_LCSR_OTAT_DBW_32 (1<<6) /* 32-bit Data Width */ - -#define TSI148_LCSR_OTAT_SUP (1<<5) /* Supervisory Access */ -#define TSI148_LCSR_OTAT_PGM (1<<4) /* Program Access */ - -#define TSI148_LCSR_OTAT_AMODE_M (0xf<<0) /* Address Mode Mask */ -#define TSI148_LCSR_OTAT_AMODE_A16 (0<<0) /* A16 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_A24 (1<<0) /* A24 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_A32 (2<<0) /* A32 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_A64 (4<<0) /* A32 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_CRCSR (5<<0) /* CR/CSR Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER1 (8<<0) /* User1 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER2 (9<<0) /* User2 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER3 (10<<0) /* User3 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER4 (11<<0) /* User4 Address Space */ - -/* - * VME Master Control Register CRG+$234 - */ -#define TSI148_LCSR_VMCTRL_VSA (1<<27) /* VMEbus Stop Ack */ -#define TSI148_LCSR_VMCTRL_VS (1<<26) /* VMEbus Stop */ -#define TSI148_LCSR_VMCTRL_DHB (1<<25) /* Device Has Bus */ -#define TSI148_LCSR_VMCTRL_DWB (1<<24) /* Device Wants Bus */ - -#define TSI148_LCSR_VMCTRL_RMWEN (1<<20) /* RMW Enable */ - -#define TSI148_LCSR_VMCTRL_ATO_M (7<<16) /* Master Access Time-out Mask - */ -#define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */ -#define TSI148_LCSR_VMCTRL_ATO_128 (1<<16) /* 128 us */ -#define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */ -#define TSI148_LCSR_VMCTRL_ATO_2M (3<<16) /* 2 ms */ -#define TSI148_LCSR_VMCTRL_ATO_8M (4<<16) /* 8 ms */ -#define TSI148_LCSR_VMCTRL_ATO_32M (5<<16) /* 32 ms */ -#define TSI148_LCSR_VMCTRL_ATO_128M (6<<16) /* 128 ms */ -#define TSI148_LCSR_VMCTRL_ATO_DIS (7<<16) /* Disabled */ - -#define TSI148_LCSR_VMCTRL_VTOFF_M (7<<12) /* VMEbus Master Time off */ -#define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */ -#define TSI148_LCSR_VMCTRL_VTOFF_1 (1<<12) /* 1us */ -#define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */ -#define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */ -#define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */ -#define TSI148_LCSR_VMCTRL_VTOFF_16 (5<<12) /* 16us */ -#define TSI148_LCSR_VMCTRL_VTOFF_32 (6<<12) /* 32us */ -#define TSI148_LCSR_VMCTRL_VTOFF_64 (7<<12) /* 64us */ - -#define TSI148_LCSR_VMCTRL_VTON_M (7<<8) /* VMEbus Master Time On */ -#define TSI148_LCSR_VMCTRL_VTON_4 (0<<8) /* 8us */ -#define TSI148_LCSR_VMCTRL_VTON_8 (1<<8) /* 8us */ -#define TSI148_LCSR_VMCTRL_VTON_16 (2<<8) /* 16us */ -#define TSI148_LCSR_VMCTRL_VTON_32 (3<<8) /* 32us */ -#define TSI148_LCSR_VMCTRL_VTON_64 (4<<8) /* 64us */ -#define TSI148_LCSR_VMCTRL_VTON_128 (5<<8) /* 128us */ -#define TSI148_LCSR_VMCTRL_VTON_256 (6<<8) /* 256us */ -#define TSI148_LCSR_VMCTRL_VTON_512 (7<<8) /* 512us */ - -#define TSI148_LCSR_VMCTRL_VREL_M (3<<3) /* VMEbus Master Rel Mode Mask - */ -#define TSI148_LCSR_VMCTRL_VREL_T_D (0<<3) /* Time on or Done */ -#define TSI148_LCSR_VMCTRL_VREL_T_R_D (1<<3) /* Time on and REQ or Done */ -#define TSI148_LCSR_VMCTRL_VREL_T_B_D (2<<3) /* Time on and BCLR or Done */ -#define TSI148_LCSR_VMCTRL_VREL_T_D_R (3<<3) /* Time on or Done and REQ */ - -#define TSI148_LCSR_VMCTRL_VFAIR (1<<2) /* VMEbus Master Fair Mode */ -#define TSI148_LCSR_VMCTRL_VREQL_M (3<<0) /* VMEbus Master Req Level Mask - */ - -/* - * VMEbus Control Register CRG+$238 - */ -#define TSI148_LCSR_VCTRL_LRE (1<<31) /* Late Retry Enable */ - -#define TSI148_LCSR_VCTRL_DLT_M (0xF<<24) /* Deadlock Timer */ -#define TSI148_LCSR_VCTRL_DLT_OFF (0<<24) /* Deadlock Timer Off */ -#define TSI148_LCSR_VCTRL_DLT_16 (1<<24) /* 16 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_32 (2<<24) /* 32 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_64 (3<<24) /* 64 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_128 (4<<24) /* 128 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_256 (5<<24) /* 256 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_512 (6<<24) /* 512 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_1024 (7<<24) /* 1024 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_2048 (8<<24) /* 2048 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_4096 (9<<24) /* 4096 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_8192 (0xA<<24) /* 8192 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_16384 (0xB<<24) /* 16384 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_32768 (0xC<<24) /* 32768 VCLKS */ - -#define TSI148_LCSR_VCTRL_NERBB (1<<20) /* No Early Release of Bus Busy - */ - -#define TSI148_LCSR_VCTRL_SRESET (1<<17) /* System Reset */ -#define TSI148_LCSR_VCTRL_LRESET (1<<16) /* Local Reset */ - -#define TSI148_LCSR_VCTRL_SFAILAI (1<<15) /* SYSFAIL Auto Slot ID */ -#define TSI148_LCSR_VCTRL_BID_M (0x1F<<8) /* Broadcast ID Mask */ - -#define TSI148_LCSR_VCTRL_ATOEN (1<<7) /* Arbiter Time-out Enable */ -#define TSI148_LCSR_VCTRL_ROBIN (1<<6) /* VMEbus Round Robin */ - -#define TSI148_LCSR_VCTRL_GTO_M (7<<0) /* VMEbus Global Time-out Mask - */ -#define TSI148_LCSR_VCTRL_GTO_8 (0<<0) /* 8 us */ -#define TSI148_LCSR_VCTRL_GTO_16 (1<<0) /* 16 us */ -#define TSI148_LCSR_VCTRL_GTO_32 (2<<0) /* 32 us */ -#define TSI148_LCSR_VCTRL_GTO_64 (3<<0) /* 64 us */ -#define TSI148_LCSR_VCTRL_GTO_128 (4<<0) /* 128 us */ -#define TSI148_LCSR_VCTRL_GTO_256 (5<<0) /* 256 us */ -#define TSI148_LCSR_VCTRL_GTO_512 (6<<0) /* 512 us */ -#define TSI148_LCSR_VCTRL_GTO_DIS (7<<0) /* Disabled */ - -/* - * VMEbus Status Register CRG + $23C - */ -#define TSI148_LCSR_VSTAT_CPURST (1<<15) /* Clear power up reset */ -#define TSI148_LCSR_VSTAT_BRDFL (1<<14) /* Board fail */ -#define TSI148_LCSR_VSTAT_PURSTS (1<<12) /* Power up reset status */ -#define TSI148_LCSR_VSTAT_BDFAILS (1<<11) /* Board Fail Status */ -#define TSI148_LCSR_VSTAT_SYSFAILS (1<<10) /* System Fail Status */ -#define TSI148_LCSR_VSTAT_ACFAILS (1<<9) /* AC fail status */ -#define TSI148_LCSR_VSTAT_SCONS (1<<8) /* System Cont Status */ -#define TSI148_LCSR_VSTAT_GAP (1<<5) /* Geographic Addr Parity */ -#define TSI148_LCSR_VSTAT_GA_M (0x1F<<0) /* Geographic Addr Mask */ - -/* - * PCI Configuration Status Register CRG+$240 - */ -#define TSI148_LCSR_PSTAT_REQ64S (1<<6) /* Request 64 status set */ -#define TSI148_LCSR_PSTAT_M66ENS (1<<5) /* M66ENS 66Mhz enable */ -#define TSI148_LCSR_PSTAT_FRAMES (1<<4) /* Frame Status */ -#define TSI148_LCSR_PSTAT_IRDYS (1<<3) /* IRDY status */ -#define TSI148_LCSR_PSTAT_DEVSELS (1<<2) /* DEVL status */ -#define TSI148_LCSR_PSTAT_STOPS (1<<1) /* STOP status */ -#define TSI148_LCSR_PSTAT_TRDYS (1<<0) /* TRDY status */ - -/* - * VMEbus Exception Attributes Register CRG + $268 - */ -#define TSI148_LCSR_VEAT_VES (1<<31) /* Status */ -#define TSI148_LCSR_VEAT_VEOF (1<<30) /* Overflow */ -#define TSI148_LCSR_VEAT_VESCL (1<<29) /* Status Clear */ -#define TSI148_LCSR_VEAT_2EOT (1<<21) /* 2e Odd Termination */ -#define TSI148_LCSR_VEAT_2EST (1<<20) /* 2e Slave terminated */ -#define TSI148_LCSR_VEAT_BERR (1<<19) /* Bus Error */ -#define TSI148_LCSR_VEAT_LWORD (1<<18) /* LWORD_ signal state */ -#define TSI148_LCSR_VEAT_WRITE (1<<17) /* WRITE_ signal state */ -#define TSI148_LCSR_VEAT_IACK (1<<16) /* IACK_ signal state */ -#define TSI148_LCSR_VEAT_DS1 (1<<15) /* DS1_ signal state */ -#define TSI148_LCSR_VEAT_DS0 (1<<14) /* DS0_ signal state */ -#define TSI148_LCSR_VEAT_AM_M (0x3F<<8) /* Address Mode Mask */ -#define TSI148_LCSR_VEAT_XAM_M (0xFF<<0) /* Master AMode Mask */ - - -/* - * VMEbus PCI Error Diagnostics PCI/X Attributes Register CRG + $280 - */ -#define TSI148_LCSR_EDPAT_EDPCL (1<<29) - -/* - * Inbound Translation Starting Address Lower - */ -#define TSI148_LCSR_ITSAL6432_M (0xFFFF<<16) /* Mask */ -#define TSI148_LCSR_ITSAL24_M (0x00FFF<<12) /* Mask */ -#define TSI148_LCSR_ITSAL16_M (0x0000FFF<<4) /* Mask */ - -/* - * Inbound Translation Ending Address Lower - */ -#define TSI148_LCSR_ITEAL6432_M (0xFFFF<<16) /* Mask */ -#define TSI148_LCSR_ITEAL24_M (0x00FFF<<12) /* Mask */ -#define TSI148_LCSR_ITEAL16_M (0x0000FFF<<4) /* Mask */ - -/* - * Inbound Translation Offset Lower - */ -#define TSI148_LCSR_ITOFFL6432_M (0xFFFF<<16) /* Mask */ -#define TSI148_LCSR_ITOFFL24_M (0xFFFFF<<12) /* Mask */ -#define TSI148_LCSR_ITOFFL16_M (0xFFFFFFF<<4) /* Mask */ - -/* - * Inbound Translation Attribute - */ -#define TSI148_LCSR_ITAT_EN (1<<31) /* Window Enable */ -#define TSI148_LCSR_ITAT_TH (1<<18) /* Prefetch Threshold */ - -#define TSI148_LCSR_ITAT_VFS_M (3<<16) /* Virtual FIFO Size Mask */ -#define TSI148_LCSR_ITAT_VFS_64 (0<<16) /* 64 bytes Virtual FIFO Size */ -#define TSI148_LCSR_ITAT_VFS_128 (1<<16) /* 128 bytes Virtual FIFO Sz */ -#define TSI148_LCSR_ITAT_VFS_256 (2<<16) /* 256 bytes Virtual FIFO Sz */ -#define TSI148_LCSR_ITAT_VFS_512 (3<<16) /* 512 bytes Virtual FIFO Sz */ - -#define TSI148_LCSR_ITAT_2eSSTM_M (7<<12) /* 2eSST Xfer Rate Mask */ -#define TSI148_LCSR_ITAT_2eSSTM_160 (0<<12) /* 160MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_ITAT_2eSSTM_267 (1<<12) /* 267MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_ITAT_2eSSTM_320 (2<<12) /* 320MB/s 2eSST Xfer Rate */ - -#define TSI148_LCSR_ITAT_2eSSTB (1<<11) /* 2eSST Bcast Xfer Protocol */ -#define TSI148_LCSR_ITAT_2eSST (1<<10) /* 2eSST Xfer Protocol */ -#define TSI148_LCSR_ITAT_2eVME (1<<9) /* 2eVME Xfer Protocol */ -#define TSI148_LCSR_ITAT_MBLT (1<<8) /* MBLT Xfer Protocol */ -#define TSI148_LCSR_ITAT_BLT (1<<7) /* BLT Xfer Protocol */ - -#define TSI148_LCSR_ITAT_AS_M (7<<4) /* Address Space Mask */ -#define TSI148_LCSR_ITAT_AS_A16 (0<<4) /* A16 Address Space */ -#define TSI148_LCSR_ITAT_AS_A24 (1<<4) /* A24 Address Space */ -#define TSI148_LCSR_ITAT_AS_A32 (2<<4) /* A32 Address Space */ -#define TSI148_LCSR_ITAT_AS_A64 (4<<4) /* A64 Address Space */ - -#define TSI148_LCSR_ITAT_SUPR (1<<3) /* Supervisor Access */ -#define TSI148_LCSR_ITAT_NPRIV (1<<2) /* Non-Priv (User) Access */ -#define TSI148_LCSR_ITAT_PGM (1<<1) /* Program Access */ -#define TSI148_LCSR_ITAT_DATA (1<<0) /* Data Access */ - -/* - * GCSR Base Address Lower Address CRG +$404 - */ -#define TSI148_LCSR_GBAL_M (0x7FFFFFF<<5) /* Mask */ - -/* - * GCSR Attribute Register CRG + $408 - */ -#define TSI148_LCSR_GCSRAT_EN (1<<7) /* Enable access to GCSR */ - -#define TSI148_LCSR_GCSRAT_AS_M (7<<4) /* Address Space Mask */ -#define TSI148_LCSR_GCSRAT_AS_A16 (0<<4) /* Address Space 16 */ -#define TSI148_LCSR_GCSRAT_AS_A24 (1<<4) /* Address Space 24 */ -#define TSI148_LCSR_GCSRAT_AS_A32 (2<<4) /* Address Space 32 */ -#define TSI148_LCSR_GCSRAT_AS_A64 (4<<4) /* Address Space 64 */ - -#define TSI148_LCSR_GCSRAT_SUPR (1<<3) /* Sup set -GCSR decoder */ -#define TSI148_LCSR_GCSRAT_NPRIV (1<<2) /* Non-Privliged set - CGSR */ -#define TSI148_LCSR_GCSRAT_PGM (1<<1) /* Program set - GCSR decoder */ -#define TSI148_LCSR_GCSRAT_DATA (1<<0) /* DATA set GCSR decoder */ - -/* - * CRG Base Address Lower Address CRG + $410 - */ -#define TSI148_LCSR_CBAL_M (0xFFFFF<<12) - -/* - * CRG Attribute Register CRG + $414 - */ -#define TSI148_LCSR_CRGAT_EN (1<<7) /* Enable PRG Access */ - -#define TSI148_LCSR_CRGAT_AS_M (7<<4) /* Address Space */ -#define TSI148_LCSR_CRGAT_AS_A16 (0<<4) /* Address Space 16 */ -#define TSI148_LCSR_CRGAT_AS_A24 (1<<4) /* Address Space 24 */ -#define TSI148_LCSR_CRGAT_AS_A32 (2<<4) /* Address Space 32 */ -#define TSI148_LCSR_CRGAT_AS_A64 (4<<4) /* Address Space 64 */ - -#define TSI148_LCSR_CRGAT_SUPR (1<<3) /* Supervisor Access */ -#define TSI148_LCSR_CRGAT_NPRIV (1<<2) /* Non-Privliged(User) Access */ -#define TSI148_LCSR_CRGAT_PGM (1<<1) /* Program Access */ -#define TSI148_LCSR_CRGAT_DATA (1<<0) /* Data Access */ - -/* - * CR/CSR Offset Lower Register CRG + $41C - */ -#define TSI148_LCSR_CROL_M (0x1FFF<<19) /* Mask */ - -/* - * CR/CSR Attribute register CRG + $420 - */ -#define TSI148_LCSR_CRAT_EN (1<<7) /* Enable access to CR/CSR */ - -/* - * Location Monitor base address lower register CRG + $428 - */ -#define TSI148_LCSR_LMBAL_M (0x7FFFFFF<<5) /* Mask */ - -/* - * Location Monitor Attribute Register CRG + $42C - */ -#define TSI148_LCSR_LMAT_EN (1<<7) /* Enable Location Monitor */ - -#define TSI148_LCSR_LMAT_AS_M (7<<4) /* Address Space MASK */ -#define TSI148_LCSR_LMAT_AS_A16 (0<<4) /* A16 */ -#define TSI148_LCSR_LMAT_AS_A24 (1<<4) /* A24 */ -#define TSI148_LCSR_LMAT_AS_A32 (2<<4) /* A32 */ -#define TSI148_LCSR_LMAT_AS_A64 (4<<4) /* A64 */ - -#define TSI148_LCSR_LMAT_SUPR (1<<3) /* Supervisor Access */ -#define TSI148_LCSR_LMAT_NPRIV (1<<2) /* Non-Priv (User) Access */ -#define TSI148_LCSR_LMAT_PGM (1<<1) /* Program Access */ -#define TSI148_LCSR_LMAT_DATA (1<<0) /* Data Access */ - -/* - * Broadcast Pulse Generator Timer Register CRG + $438 - */ -#define TSI148_LCSR_BPGTR_BPGT_M (0xFFFF<<0) /* Mask */ - -/* - * Broadcast Programmable Clock Timer Register CRG + $43C - */ -#define TSI148_LCSR_BPCTR_BPCT_M (0xFFFFFF<<0) /* Mask */ - -/* - * VMEbus Interrupt Control Register CRG + $43C - */ -#define TSI148_LCSR_VICR_CNTS_M (3<<22) /* Cntr Source MASK */ -#define TSI148_LCSR_VICR_CNTS_DIS (1<<22) /* Cntr Disable */ -#define TSI148_LCSR_VICR_CNTS_IRQ1 (2<<22) /* IRQ1 to Cntr */ -#define TSI148_LCSR_VICR_CNTS_IRQ2 (3<<22) /* IRQ2 to Cntr */ - -#define TSI148_LCSR_VICR_EDGIS_M (3<<20) /* Edge interrupt MASK */ -#define TSI148_LCSR_VICR_EDGIS_DIS (1<<20) /* Edge interrupt Disable */ -#define TSI148_LCSR_VICR_EDGIS_IRQ1 (2<<20) /* IRQ1 to Edge */ -#define TSI148_LCSR_VICR_EDGIS_IRQ2 (3<<20) /* IRQ2 to Edge */ - -#define TSI148_LCSR_VICR_IRQIF_M (3<<18) /* IRQ1* Function MASK */ -#define TSI148_LCSR_VICR_IRQIF_NORM (1<<18) /* Normal */ -#define TSI148_LCSR_VICR_IRQIF_PULSE (2<<18) /* Pulse Generator */ -#define TSI148_LCSR_VICR_IRQIF_PROG (3<<18) /* Programmable Clock */ -#define TSI148_LCSR_VICR_IRQIF_1U (4<<18) /* 1us Clock */ - -#define TSI148_LCSR_VICR_IRQ2F_M (3<<16) /* IRQ2* Function MASK */ -#define TSI148_LCSR_VICR_IRQ2F_NORM (1<<16) /* Normal */ -#define TSI148_LCSR_VICR_IRQ2F_PULSE (2<<16) /* Pulse Generator */ -#define TSI148_LCSR_VICR_IRQ2F_PROG (3<<16) /* Programmable Clock */ -#define TSI148_LCSR_VICR_IRQ2F_1U (4<<16) /* 1us Clock */ - -#define TSI148_LCSR_VICR_BIP (1<<15) /* Broadcast Interrupt Pulse */ - -#define TSI148_LCSR_VICR_IRQC (1<<12) /* VMEbus IRQ Clear */ -#define TSI148_LCSR_VICR_IRQS (1<<11) /* VMEbus IRQ Status */ - -#define TSI148_LCSR_VICR_IRQL_M (7<<8) /* VMEbus SW IRQ Level Mask */ -#define TSI148_LCSR_VICR_IRQL_1 (1<<8) /* VMEbus SW IRQ Level 1 */ -#define TSI148_LCSR_VICR_IRQL_2 (2<<8) /* VMEbus SW IRQ Level 2 */ -#define TSI148_LCSR_VICR_IRQL_3 (3<<8) /* VMEbus SW IRQ Level 3 */ -#define TSI148_LCSR_VICR_IRQL_4 (4<<8) /* VMEbus SW IRQ Level 4 */ -#define TSI148_LCSR_VICR_IRQL_5 (5<<8) /* VMEbus SW IRQ Level 5 */ -#define TSI148_LCSR_VICR_IRQL_6 (6<<8) /* VMEbus SW IRQ Level 6 */ -#define TSI148_LCSR_VICR_IRQL_7 (7<<8) /* VMEbus SW IRQ Level 7 */ - -static const int TSI148_LCSR_VICR_IRQL[8] = { 0, TSI148_LCSR_VICR_IRQL_1, - TSI148_LCSR_VICR_IRQL_2, TSI148_LCSR_VICR_IRQL_3, - TSI148_LCSR_VICR_IRQL_4, TSI148_LCSR_VICR_IRQL_5, - TSI148_LCSR_VICR_IRQL_6, TSI148_LCSR_VICR_IRQL_7 }; - -#define TSI148_LCSR_VICR_STID_M (0xFF<<0) /* Status/ID Mask */ - -/* - * Interrupt Enable Register CRG + $440 - */ -#define TSI148_LCSR_INTEN_DMA1EN (1<<25) /* DMAC 1 */ -#define TSI148_LCSR_INTEN_DMA0EN (1<<24) /* DMAC 0 */ -#define TSI148_LCSR_INTEN_LM3EN (1<<23) /* Location Monitor 3 */ -#define TSI148_LCSR_INTEN_LM2EN (1<<22) /* Location Monitor 2 */ -#define TSI148_LCSR_INTEN_LM1EN (1<<21) /* Location Monitor 1 */ -#define TSI148_LCSR_INTEN_LM0EN (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTEN_MB3EN (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTEN_MB2EN (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTEN_MB1EN (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTEN_MB0EN (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTEN_PERREN (1<<13) /* PCI/X Error */ -#define TSI148_LCSR_INTEN_VERREN (1<<12) /* VMEbus Error */ -#define TSI148_LCSR_INTEN_VIEEN (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTEN_IACKEN (1<<10) /* IACK */ -#define TSI148_LCSR_INTEN_SYSFLEN (1<<9) /* System Fail */ -#define TSI148_LCSR_INTEN_ACFLEN (1<<8) /* AC Fail */ -#define TSI148_LCSR_INTEN_IRQ7EN (1<<7) /* IRQ7 */ -#define TSI148_LCSR_INTEN_IRQ6EN (1<<6) /* IRQ6 */ -#define TSI148_LCSR_INTEN_IRQ5EN (1<<5) /* IRQ5 */ -#define TSI148_LCSR_INTEN_IRQ4EN (1<<4) /* IRQ4 */ -#define TSI148_LCSR_INTEN_IRQ3EN (1<<3) /* IRQ3 */ -#define TSI148_LCSR_INTEN_IRQ2EN (1<<2) /* IRQ2 */ -#define TSI148_LCSR_INTEN_IRQ1EN (1<<1) /* IRQ1 */ - -static const int TSI148_LCSR_INTEN_LMEN[4] = { TSI148_LCSR_INTEN_LM0EN, - TSI148_LCSR_INTEN_LM1EN, - TSI148_LCSR_INTEN_LM2EN, - TSI148_LCSR_INTEN_LM3EN }; - -static const int TSI148_LCSR_INTEN_IRQEN[7] = { TSI148_LCSR_INTEN_IRQ1EN, - TSI148_LCSR_INTEN_IRQ2EN, - TSI148_LCSR_INTEN_IRQ3EN, - TSI148_LCSR_INTEN_IRQ4EN, - TSI148_LCSR_INTEN_IRQ5EN, - TSI148_LCSR_INTEN_IRQ6EN, - TSI148_LCSR_INTEN_IRQ7EN }; - -/* - * Interrupt Enable Out Register CRG + $444 - */ -#define TSI148_LCSR_INTEO_DMA1EO (1<<25) /* DMAC 1 */ -#define TSI148_LCSR_INTEO_DMA0EO (1<<24) /* DMAC 0 */ -#define TSI148_LCSR_INTEO_LM3EO (1<<23) /* Loc Monitor 3 */ -#define TSI148_LCSR_INTEO_LM2EO (1<<22) /* Loc Monitor 2 */ -#define TSI148_LCSR_INTEO_LM1EO (1<<21) /* Loc Monitor 1 */ -#define TSI148_LCSR_INTEO_LM0EO (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTEO_MB3EO (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTEO_MB2EO (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTEO_MB1EO (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTEO_MB0EO (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTEO_PERREO (1<<13) /* PCI/X Error */ -#define TSI148_LCSR_INTEO_VERREO (1<<12) /* VMEbus Error */ -#define TSI148_LCSR_INTEO_VIEEO (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTEO_IACKEO (1<<10) /* IACK */ -#define TSI148_LCSR_INTEO_SYSFLEO (1<<9) /* System Fail */ -#define TSI148_LCSR_INTEO_ACFLEO (1<<8) /* AC Fail */ -#define TSI148_LCSR_INTEO_IRQ7EO (1<<7) /* IRQ7 */ -#define TSI148_LCSR_INTEO_IRQ6EO (1<<6) /* IRQ6 */ -#define TSI148_LCSR_INTEO_IRQ5EO (1<<5) /* IRQ5 */ -#define TSI148_LCSR_INTEO_IRQ4EO (1<<4) /* IRQ4 */ -#define TSI148_LCSR_INTEO_IRQ3EO (1<<3) /* IRQ3 */ -#define TSI148_LCSR_INTEO_IRQ2EO (1<<2) /* IRQ2 */ -#define TSI148_LCSR_INTEO_IRQ1EO (1<<1) /* IRQ1 */ - -static const int TSI148_LCSR_INTEO_LMEO[4] = { TSI148_LCSR_INTEO_LM0EO, - TSI148_LCSR_INTEO_LM1EO, - TSI148_LCSR_INTEO_LM2EO, - TSI148_LCSR_INTEO_LM3EO }; - -static const int TSI148_LCSR_INTEO_IRQEO[7] = { TSI148_LCSR_INTEO_IRQ1EO, - TSI148_LCSR_INTEO_IRQ2EO, - TSI148_LCSR_INTEO_IRQ3EO, - TSI148_LCSR_INTEO_IRQ4EO, - TSI148_LCSR_INTEO_IRQ5EO, - TSI148_LCSR_INTEO_IRQ6EO, - TSI148_LCSR_INTEO_IRQ7EO }; - -/* - * Interrupt Status Register CRG + $448 - */ -#define TSI148_LCSR_INTS_DMA1S (1<<25) /* DMA 1 */ -#define TSI148_LCSR_INTS_DMA0S (1<<24) /* DMA 0 */ -#define TSI148_LCSR_INTS_LM3S (1<<23) /* Location Monitor 3 */ -#define TSI148_LCSR_INTS_LM2S (1<<22) /* Location Monitor 2 */ -#define TSI148_LCSR_INTS_LM1S (1<<21) /* Location Monitor 1 */ -#define TSI148_LCSR_INTS_LM0S (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTS_MB3S (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTS_MB2S (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTS_MB1S (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTS_MB0S (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTS_PERRS (1<<13) /* PCI/X Error */ -#define TSI148_LCSR_INTS_VERRS (1<<12) /* VMEbus Error */ -#define TSI148_LCSR_INTS_VIES (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTS_IACKS (1<<10) /* IACK */ -#define TSI148_LCSR_INTS_SYSFLS (1<<9) /* System Fail */ -#define TSI148_LCSR_INTS_ACFLS (1<<8) /* AC Fail */ -#define TSI148_LCSR_INTS_IRQ7S (1<<7) /* IRQ7 */ -#define TSI148_LCSR_INTS_IRQ6S (1<<6) /* IRQ6 */ -#define TSI148_LCSR_INTS_IRQ5S (1<<5) /* IRQ5 */ -#define TSI148_LCSR_INTS_IRQ4S (1<<4) /* IRQ4 */ -#define TSI148_LCSR_INTS_IRQ3S (1<<3) /* IRQ3 */ -#define TSI148_LCSR_INTS_IRQ2S (1<<2) /* IRQ2 */ -#define TSI148_LCSR_INTS_IRQ1S (1<<1) /* IRQ1 */ - -static const int TSI148_LCSR_INTS_LMS[4] = { TSI148_LCSR_INTS_LM0S, - TSI148_LCSR_INTS_LM1S, - TSI148_LCSR_INTS_LM2S, - TSI148_LCSR_INTS_LM3S }; - -static const int TSI148_LCSR_INTS_MBS[4] = { TSI148_LCSR_INTS_MB0S, - TSI148_LCSR_INTS_MB1S, - TSI148_LCSR_INTS_MB2S, - TSI148_LCSR_INTS_MB3S }; - -/* - * Interrupt Clear Register CRG + $44C - */ -#define TSI148_LCSR_INTC_DMA1C (1<<25) /* DMA 1 */ -#define TSI148_LCSR_INTC_DMA0C (1<<24) /* DMA 0 */ -#define TSI148_LCSR_INTC_LM3C (1<<23) /* Location Monitor 3 */ -#define TSI148_LCSR_INTC_LM2C (1<<22) /* Location Monitor 2 */ -#define TSI148_LCSR_INTC_LM1C (1<<21) /* Location Monitor 1 */ -#define TSI148_LCSR_INTC_LM0C (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTC_MB3C (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTC_MB2C (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTC_MB1C (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTC_MB0C (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTC_PERRC (1<<13) /* VMEbus Error */ -#define TSI148_LCSR_INTC_VERRC (1<<12) /* VMEbus Access Time-out */ -#define TSI148_LCSR_INTC_VIEC (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTC_IACKC (1<<10) /* IACK */ -#define TSI148_LCSR_INTC_SYSFLC (1<<9) /* System Fail */ -#define TSI148_LCSR_INTC_ACFLC (1<<8) /* AC Fail */ - -static const int TSI148_LCSR_INTC_LMC[4] = { TSI148_LCSR_INTC_LM0C, - TSI148_LCSR_INTC_LM1C, - TSI148_LCSR_INTC_LM2C, - TSI148_LCSR_INTC_LM3C }; - -static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C, - TSI148_LCSR_INTC_MB1C, - TSI148_LCSR_INTC_MB2C, - TSI148_LCSR_INTC_MB3C }; - -/* - * Interrupt Map Register 1 CRG + $458 - */ -#define TSI148_LCSR_INTM1_DMA1M_M (3<<18) /* DMA 1 */ -#define TSI148_LCSR_INTM1_DMA0M_M (3<<16) /* DMA 0 */ -#define TSI148_LCSR_INTM1_LM3M_M (3<<14) /* Location Monitor 3 */ -#define TSI148_LCSR_INTM1_LM2M_M (3<<12) /* Location Monitor 2 */ -#define TSI148_LCSR_INTM1_LM1M_M (3<<10) /* Location Monitor 1 */ -#define TSI148_LCSR_INTM1_LM0M_M (3<<8) /* Location Monitor 0 */ -#define TSI148_LCSR_INTM1_MB3M_M (3<<6) /* Mail Box 3 */ -#define TSI148_LCSR_INTM1_MB2M_M (3<<4) /* Mail Box 2 */ -#define TSI148_LCSR_INTM1_MB1M_M (3<<2) /* Mail Box 1 */ -#define TSI148_LCSR_INTM1_MB0M_M (3<<0) /* Mail Box 0 */ - -/* - * Interrupt Map Register 2 CRG + $45C - */ -#define TSI148_LCSR_INTM2_PERRM_M (3<<26) /* PCI Bus Error */ -#define TSI148_LCSR_INTM2_VERRM_M (3<<24) /* VMEbus Error */ -#define TSI148_LCSR_INTM2_VIEM_M (3<<22) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTM2_IACKM_M (3<<20) /* IACK */ -#define TSI148_LCSR_INTM2_SYSFLM_M (3<<18) /* System Fail */ -#define TSI148_LCSR_INTM2_ACFLM_M (3<<16) /* AC Fail */ -#define TSI148_LCSR_INTM2_IRQ7M_M (3<<14) /* IRQ7 */ -#define TSI148_LCSR_INTM2_IRQ6M_M (3<<12) /* IRQ6 */ -#define TSI148_LCSR_INTM2_IRQ5M_M (3<<10) /* IRQ5 */ -#define TSI148_LCSR_INTM2_IRQ4M_M (3<<8) /* IRQ4 */ -#define TSI148_LCSR_INTM2_IRQ3M_M (3<<6) /* IRQ3 */ -#define TSI148_LCSR_INTM2_IRQ2M_M (3<<4) /* IRQ2 */ -#define TSI148_LCSR_INTM2_IRQ1M_M (3<<2) /* IRQ1 */ - -/* - * DMA Control (0-1) Registers CRG + $500 - */ -#define TSI148_LCSR_DCTL_ABT (1<<27) /* Abort */ -#define TSI148_LCSR_DCTL_PAU (1<<26) /* Pause */ -#define TSI148_LCSR_DCTL_DGO (1<<25) /* DMA Go */ - -#define TSI148_LCSR_DCTL_MOD (1<<23) /* Mode */ - -#define TSI148_LCSR_DCTL_VBKS_M (7<<12) /* VMEbus block Size MASK */ -#define TSI148_LCSR_DCTL_VBKS_32 (0<<12) /* VMEbus block Size 32 */ -#define TSI148_LCSR_DCTL_VBKS_64 (1<<12) /* VMEbus block Size 64 */ -#define TSI148_LCSR_DCTL_VBKS_128 (2<<12) /* VMEbus block Size 128 */ -#define TSI148_LCSR_DCTL_VBKS_256 (3<<12) /* VMEbus block Size 256 */ -#define TSI148_LCSR_DCTL_VBKS_512 (4<<12) /* VMEbus block Size 512 */ -#define TSI148_LCSR_DCTL_VBKS_1024 (5<<12) /* VMEbus block Size 1024 */ -#define TSI148_LCSR_DCTL_VBKS_2048 (6<<12) /* VMEbus block Size 2048 */ -#define TSI148_LCSR_DCTL_VBKS_4096 (7<<12) /* VMEbus block Size 4096 */ - -#define TSI148_LCSR_DCTL_VBOT_M (7<<8) /* VMEbus back-off MASK */ -#define TSI148_LCSR_DCTL_VBOT_0 (0<<8) /* VMEbus back-off 0us */ -#define TSI148_LCSR_DCTL_VBOT_1 (1<<8) /* VMEbus back-off 1us */ -#define TSI148_LCSR_DCTL_VBOT_2 (2<<8) /* VMEbus back-off 2us */ -#define TSI148_LCSR_DCTL_VBOT_4 (3<<8) /* VMEbus back-off 4us */ -#define TSI148_LCSR_DCTL_VBOT_8 (4<<8) /* VMEbus back-off 8us */ -#define TSI148_LCSR_DCTL_VBOT_16 (5<<8) /* VMEbus back-off 16us */ -#define TSI148_LCSR_DCTL_VBOT_32 (6<<8) /* VMEbus back-off 32us */ -#define TSI148_LCSR_DCTL_VBOT_64 (7<<8) /* VMEbus back-off 64us */ - -#define TSI148_LCSR_DCTL_PBKS_M (7<<4) /* PCI block size MASK */ -#define TSI148_LCSR_DCTL_PBKS_32 (0<<4) /* PCI block size 32 bytes */ -#define TSI148_LCSR_DCTL_PBKS_64 (1<<4) /* PCI block size 64 bytes */ -#define TSI148_LCSR_DCTL_PBKS_128 (2<<4) /* PCI block size 128 bytes */ -#define TSI148_LCSR_DCTL_PBKS_256 (3<<4) /* PCI block size 256 bytes */ -#define TSI148_LCSR_DCTL_PBKS_512 (4<<4) /* PCI block size 512 bytes */ -#define TSI148_LCSR_DCTL_PBKS_1024 (5<<4) /* PCI block size 1024 bytes */ -#define TSI148_LCSR_DCTL_PBKS_2048 (6<<4) /* PCI block size 2048 bytes */ -#define TSI148_LCSR_DCTL_PBKS_4096 (7<<4) /* PCI block size 4096 bytes */ - -#define TSI148_LCSR_DCTL_PBOT_M (7<<0) /* PCI back off MASK */ -#define TSI148_LCSR_DCTL_PBOT_0 (0<<0) /* PCI back off 0us */ -#define TSI148_LCSR_DCTL_PBOT_1 (1<<0) /* PCI back off 1us */ -#define TSI148_LCSR_DCTL_PBOT_2 (2<<0) /* PCI back off 2us */ -#define TSI148_LCSR_DCTL_PBOT_4 (3<<0) /* PCI back off 3us */ -#define TSI148_LCSR_DCTL_PBOT_8 (4<<0) /* PCI back off 4us */ -#define TSI148_LCSR_DCTL_PBOT_16 (5<<0) /* PCI back off 8us */ -#define TSI148_LCSR_DCTL_PBOT_32 (6<<0) /* PCI back off 16us */ -#define TSI148_LCSR_DCTL_PBOT_64 (7<<0) /* PCI back off 32us */ - -/* - * DMA Status Registers (0-1) CRG + $504 - */ -#define TSI148_LCSR_DSTA_SMA (1<<31) /* PCI Signalled Master Abt */ -#define TSI148_LCSR_DSTA_RTA (1<<30) /* PCI Received Target Abt */ -#define TSI148_LCSR_DSTA_MRC (1<<29) /* PCI Max Retry Count */ -#define TSI148_LCSR_DSTA_VBE (1<<28) /* VMEbus error */ -#define TSI148_LCSR_DSTA_ABT (1<<27) /* Abort */ -#define TSI148_LCSR_DSTA_PAU (1<<26) /* Pause */ -#define TSI148_LCSR_DSTA_DON (1<<25) /* Done */ -#define TSI148_LCSR_DSTA_BSY (1<<24) /* Busy */ - -/* - * DMA Current Link Address Lower (0-1) - */ -#define TSI148_LCSR_DCLAL_M (0x3FFFFFF<<6) /* Mask */ - -/* - * DMA Source Attribute (0-1) Reg - */ -#define TSI148_LCSR_DSAT_TYP_M (3<<28) /* Source Bus Type */ -#define TSI148_LCSR_DSAT_TYP_PCI (0<<28) /* PCI Bus */ -#define TSI148_LCSR_DSAT_TYP_VME (1<<28) /* VMEbus */ -#define TSI148_LCSR_DSAT_TYP_PAT (2<<28) /* Data Pattern */ - -#define TSI148_LCSR_DSAT_PSZ (1<<25) /* Pattern Size */ -#define TSI148_LCSR_DSAT_NIN (1<<24) /* No Increment */ - -#define TSI148_LCSR_DSAT_2eSSTM_M (3<<11) /* 2eSST Trans Rate Mask */ -#define TSI148_LCSR_DSAT_2eSSTM_160 (0<<11) /* 160 MB/s */ -#define TSI148_LCSR_DSAT_2eSSTM_267 (1<<11) /* 267 MB/s */ -#define TSI148_LCSR_DSAT_2eSSTM_320 (2<<11) /* 320 MB/s */ - -#define TSI148_LCSR_DSAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ -#define TSI148_LCSR_DSAT_TM_SCT (0<<8) /* SCT */ -#define TSI148_LCSR_DSAT_TM_BLT (1<<8) /* BLT */ -#define TSI148_LCSR_DSAT_TM_MBLT (2<<8) /* MBLT */ -#define TSI148_LCSR_DSAT_TM_2eVME (3<<8) /* 2eVME */ -#define TSI148_LCSR_DSAT_TM_2eSST (4<<8) /* 2eSST */ -#define TSI148_LCSR_DSAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ - -#define TSI148_LCSR_DSAT_DBW_M (3<<6) /* Max Data Width MASK */ -#define TSI148_LCSR_DSAT_DBW_16 (0<<6) /* 16 Bits */ -#define TSI148_LCSR_DSAT_DBW_32 (1<<6) /* 32 Bits */ - -#define TSI148_LCSR_DSAT_SUP (1<<5) /* Supervisory Mode */ -#define TSI148_LCSR_DSAT_PGM (1<<4) /* Program Mode */ - -#define TSI148_LCSR_DSAT_AMODE_M (0xf<<0) /* Address Space Mask */ -#define TSI148_LCSR_DSAT_AMODE_A16 (0<<0) /* A16 */ -#define TSI148_LCSR_DSAT_AMODE_A24 (1<<0) /* A24 */ -#define TSI148_LCSR_DSAT_AMODE_A32 (2<<0) /* A32 */ -#define TSI148_LCSR_DSAT_AMODE_A64 (4<<0) /* A64 */ -#define TSI148_LCSR_DSAT_AMODE_CRCSR (5<<0) /* CR/CSR */ -#define TSI148_LCSR_DSAT_AMODE_USER1 (8<<0) /* User1 */ -#define TSI148_LCSR_DSAT_AMODE_USER2 (9<<0) /* User2 */ -#define TSI148_LCSR_DSAT_AMODE_USER3 (0xa<<0) /* User3 */ -#define TSI148_LCSR_DSAT_AMODE_USER4 (0xb<<0) /* User4 */ - -/* - * DMA Destination Attribute Registers (0-1) - */ -#define TSI148_LCSR_DDAT_TYP_PCI (0<<28) /* Destination PCI Bus */ -#define TSI148_LCSR_DDAT_TYP_VME (1<<28) /* Destination VMEbus */ - -#define TSI148_LCSR_DDAT_2eSSTM_M (3<<11) /* 2eSST Transfer Rate Mask */ -#define TSI148_LCSR_DDAT_2eSSTM_160 (0<<11) /* 160 MB/s */ -#define TSI148_LCSR_DDAT_2eSSTM_267 (1<<11) /* 267 MB/s */ -#define TSI148_LCSR_DDAT_2eSSTM_320 (2<<11) /* 320 MB/s */ - -#define TSI148_LCSR_DDAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ -#define TSI148_LCSR_DDAT_TM_SCT (0<<8) /* SCT */ -#define TSI148_LCSR_DDAT_TM_BLT (1<<8) /* BLT */ -#define TSI148_LCSR_DDAT_TM_MBLT (2<<8) /* MBLT */ -#define TSI148_LCSR_DDAT_TM_2eVME (3<<8) /* 2eVME */ -#define TSI148_LCSR_DDAT_TM_2eSST (4<<8) /* 2eSST */ -#define TSI148_LCSR_DDAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ - -#define TSI148_LCSR_DDAT_DBW_M (3<<6) /* Max Data Width MASK */ -#define TSI148_LCSR_DDAT_DBW_16 (0<<6) /* 16 Bits */ -#define TSI148_LCSR_DDAT_DBW_32 (1<<6) /* 32 Bits */ - -#define TSI148_LCSR_DDAT_SUP (1<<5) /* Supervisory/User Access */ -#define TSI148_LCSR_DDAT_PGM (1<<4) /* Program/Data Access */ - -#define TSI148_LCSR_DDAT_AMODE_M (0xf<<0) /* Address Space Mask */ -#define TSI148_LCSR_DDAT_AMODE_A16 (0<<0) /* A16 */ -#define TSI148_LCSR_DDAT_AMODE_A24 (1<<0) /* A24 */ -#define TSI148_LCSR_DDAT_AMODE_A32 (2<<0) /* A32 */ -#define TSI148_LCSR_DDAT_AMODE_A64 (4<<0) /* A64 */ -#define TSI148_LCSR_DDAT_AMODE_CRCSR (5<<0) /* CRC/SR */ -#define TSI148_LCSR_DDAT_AMODE_USER1 (8<<0) /* User1 */ -#define TSI148_LCSR_DDAT_AMODE_USER2 (9<<0) /* User2 */ -#define TSI148_LCSR_DDAT_AMODE_USER3 (0xa<<0) /* User3 */ -#define TSI148_LCSR_DDAT_AMODE_USER4 (0xb<<0) /* User4 */ - -/* - * DMA Next Link Address Lower - */ -#define TSI148_LCSR_DNLAL_DNLAL_M (0x3FFFFFF<<6) /* Address Mask */ -#define TSI148_LCSR_DNLAL_LLA (1<<0) /* Last Link Address Indicator */ - -/* - * DMA 2eSST Broadcast Select - */ -#define TSI148_LCSR_DBS_M (0x1FFFFF<<0) /* Mask */ - -/* - * GCSR Register Group - */ - -/* - * GCSR Control and Status Register CRG + $604 - */ -#define TSI148_GCSR_GCTRL_LRST (1<<15) /* Local Reset */ -#define TSI148_GCSR_GCTRL_SFAILEN (1<<14) /* System Fail enable */ -#define TSI148_GCSR_GCTRL_BDFAILS (1<<13) /* Board Fail Status */ -#define TSI148_GCSR_GCTRL_SCON (1<<12) /* System Copntroller */ -#define TSI148_GCSR_GCTRL_MEN (1<<11) /* Module Enable (READY) */ - -#define TSI148_GCSR_GCTRL_LMI3S (1<<7) /* Loc Monitor 3 Int Status */ -#define TSI148_GCSR_GCTRL_LMI2S (1<<6) /* Loc Monitor 2 Int Status */ -#define TSI148_GCSR_GCTRL_LMI1S (1<<5) /* Loc Monitor 1 Int Status */ -#define TSI148_GCSR_GCTRL_LMI0S (1<<4) /* Loc Monitor 0 Int Status */ -#define TSI148_GCSR_GCTRL_MBI3S (1<<3) /* Mail box 3 Int Status */ -#define TSI148_GCSR_GCTRL_MBI2S (1<<2) /* Mail box 2 Int Status */ -#define TSI148_GCSR_GCTRL_MBI1S (1<<1) /* Mail box 1 Int Status */ -#define TSI148_GCSR_GCTRL_MBI0S (1<<0) /* Mail box 0 Int Status */ - -#define TSI148_GCSR_GAP (1<<5) /* Geographic Addr Parity */ -#define TSI148_GCSR_GA_M (0x1F<<0) /* Geographic Address Mask */ - -/* - * CR/CSR Register Group - */ - -/* - * CR/CSR Bit Clear Register CRG + $FF4 - */ -#define TSI148_CRCSR_CSRBCR_LRSTC (1<<7) /* Local Reset Clear */ -#define TSI148_CRCSR_CSRBCR_SFAILC (1<<6) /* System Fail Enable Clear */ -#define TSI148_CRCSR_CSRBCR_BDFAILS (1<<5) /* Board Fail Status */ -#define TSI148_CRCSR_CSRBCR_MENC (1<<4) /* Module Enable Clear */ -#define TSI148_CRCSR_CSRBCR_BERRSC (1<<3) /* Bus Error Status Clear */ - -/* - * CR/CSR Bit Set Register CRG+$FF8 - */ -#define TSI148_CRCSR_CSRBSR_LISTS (1<<7) /* Local Reset Clear */ -#define TSI148_CRCSR_CSRBSR_SFAILS (1<<6) /* System Fail Enable Clear */ -#define TSI148_CRCSR_CSRBSR_BDFAILS (1<<5) /* Board Fail Status */ -#define TSI148_CRCSR_CSRBSR_MENS (1<<4) /* Module Enable Clear */ -#define TSI148_CRCSR_CSRBSR_BERRS (1<<3) /* Bus Error Status Clear */ - -/* - * CR/CSR Base Address Register CRG + FFC - */ -#define TSI148_CRCSR_CBAR_M (0x1F<<3) /* Mask */ - -#endif /* TSI148_H */ |