aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/wilc1000/wilc_wlan_if.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/wilc1000/wilc_wlan_if.h')
-rw-r--r--drivers/staging/wilc1000/wilc_wlan_if.h969
1 files changed, 969 insertions, 0 deletions
diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
new file mode 100644
index 000000000000..8ed51e385118
--- /dev/null
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -0,0 +1,969 @@
+/* ////////////////////////////////////////////////////////////////////////// */
+/* */
+/* Copyright (c) Atmel Corporation. All rights reserved. */
+/* */
+/* Module Name: wilc_wlan_if.h */
+/* */
+/* */
+/* ///////////////////////////////////////////////////////////////////////// */
+
+
+#ifndef WILC_WLAN_IF_H
+#define WILC_WLAN_IF_H
+
+/*bug 3887: [AP] Allow Management frames to be passed to the host*/
+#define WILC_AP_EXTERNAL_MLME
+#define WILC_P2P
+#define TCP_ENHANCEMENTS
+/* #define MEMORY_STATIC */
+/* #define WILC_FULLY_HOSTING_AP */
+/* #define USE_OLD_SPI_SW */
+
+
+#include "wilc_type.h"
+#include "linux_wlan_common.h"
+
+
+/********************************************
+ *
+ * Debug Flags
+ *
+ ********************************************/
+
+#define N_INIT 0x00000001
+#define N_ERR 0x00000002
+#define N_TXQ 0x00000004
+#define N_INTR 0x00000008
+#define N_RXQ 0x00000010
+
+/********************************************
+ *
+ * Host Interface Defines
+ *
+ ********************************************/
+
+#define HIF_SDIO (0)
+#define HIF_SPI (1 << 0)
+#define HIF_SDIO_GPIO_IRQ (1 << 2)
+
+
+/********************************************
+ *
+ * Tx/Rx Buffer Size Defines
+ *
+ ********************************************/
+
+#define CE_TX_BUFFER_SIZE (64 * 1024)
+#define CE_RX_BUFFER_SIZE (384 * 1024)
+
+/********************************************
+ *
+ * Wlan Interface Defines
+ *
+ ********************************************/
+
+typedef struct {
+ uint32_t read_write: 1;
+ uint32_t function: 3;
+ uint32_t raw: 1;
+ uint32_t address: 17;
+ uint32_t data: 8;
+} sdio_cmd52_t;
+
+typedef struct {
+ /* struct { */
+ uint32_t read_write: 1;
+ uint32_t function: 3;
+ uint32_t block_mode: 1;
+ uint32_t increment: 1;
+ uint32_t address: 17;
+ uint32_t count: 9;
+ /* } bit; */
+ uint8_t *buffer;
+ uint32_t block_size;
+} sdio_cmd53_t;
+
+typedef struct {
+ void (*os_sleep)(uint32_t);
+ void (*os_atomic_sleep)(uint32_t);
+ void (*os_debug)(uint8_t *);
+ void *(*os_malloc)(uint32_t);
+ void *(*os_malloc_atomic)(uint32_t);
+ void (*os_free)(void *);
+ void (*os_lock)(void *);
+ void (*os_unlock)(void *);
+ int (*os_wait)(void *, u32);
+ void (*os_signal)(void *);
+ void (*os_enter_cs)(void *);
+ void (*os_leave_cs)(void *);
+
+ /*Added by Amr - BugID_4720*/
+ void (*os_spin_lock)(void *, unsigned long *);
+ void (*os_spin_unlock)(void *, unsigned long *);
+
+} wilc_wlan_os_func_t;
+
+typedef struct {
+ int io_type;
+ int (*io_init)(void *);
+ void (*io_deinit)(void *);
+ union {
+ struct {
+ int (*sdio_cmd52)(sdio_cmd52_t *);
+ int (*sdio_cmd53)(sdio_cmd53_t *);
+ int (*sdio_set_max_speed)(void);
+ int (*sdio_set_default_speed)(void);
+ } sdio;
+ struct {
+ int (*spi_max_speed)(void);
+ int (*spi_tx)(uint8_t *, uint32_t);
+ int (*spi_rx)(uint8_t *, uint32_t);
+ int (*spi_trx)(uint8_t *, uint8_t *, uint32_t);
+ } spi;
+ } u;
+} wilc_wlan_io_func_t;
+
+typedef struct {
+ void (*rx_indicate)(uint8_t *, uint32_t, uint32_t);
+ void (*rx_complete)(void);
+} wilc_wlan_net_func_t;
+
+typedef struct {
+ void (*mac_indicate)(int);
+} wilc_wlan_indicate_func_t;
+#define WILC_MAC_INDICATE_STATUS 0x1
+#define WILC_MAC_STATUS_INIT -1
+#define WILC_MAC_STATUS_READY 0
+#define WILC_MAC_STATUS_CONNECT 1
+
+#define WILC_MAC_INDICATE_SCAN 0x2
+
+typedef struct {
+ void *os_private;
+
+ void *hif_critical_section;
+
+ uint32_t tx_buffer_size;
+ void *txq_critical_section;
+
+ /*Added by Amr - BugID_4720*/
+ void *txq_add_to_head_critical_section;
+ void *txq_spin_lock;
+
+ void *txq_wait_event;
+
+#if defined(MEMORY_STATIC)
+ uint32_t rx_buffer_size;
+#endif
+ void *rxq_critical_section;
+ void *rxq_wait_event;
+
+ void *cfg_wait_event;
+} wilc_wlan_os_context_t;
+
+typedef struct {
+ wilc_wlan_os_context_t os_context;
+ wilc_wlan_os_func_t os_func;
+ wilc_wlan_io_func_t io_func;
+ wilc_wlan_net_func_t net_func;
+ wilc_wlan_indicate_func_t indicate_func;
+} wilc_wlan_inp_t;
+
+struct tx_complete_data {
+ #ifdef WILC_FULLY_HOSTING_AP
+ struct tx_complete_data *next;
+ #endif
+ int size;
+ void *buff;
+ uint8_t *pBssid;
+ struct sk_buff *skb;
+};
+
+
+typedef void (*wilc_tx_complete_func_t)(void *, int);
+
+#define WILC_TX_ERR_NO_BUF (-2)
+
+typedef struct {
+ int (*wlan_firmware_download)(const uint8_t *, uint32_t);
+ int (*wlan_start)(void);
+ int (*wlan_stop)(void);
+ int (*wlan_add_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
+ int (*wlan_handle_tx_que)(uint32_t *);
+ void (*wlan_handle_rx_que)(void);
+ void (*wlan_handle_rx_isr)(void);
+ void (*wlan_cleanup)(void);
+ int (*wlan_cfg_set)(int, uint32_t, uint8_t *, uint32_t, int, uint32_t);
+ int (*wlan_cfg_get)(int, uint32_t, int, uint32_t);
+ int (*wlan_cfg_get_value)(uint32_t, uint8_t *, uint32_t);
+ /*Bug3959: transmitting mgmt frames received from host*/
+ #if defined(WILC_AP_EXTERNAL_MLME) || defined(WILC_P2P)
+ int (*wlan_add_mgmt_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
+
+ #ifdef WILC_FULLY_HOSTING_AP
+ int (*wlan_add_data_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
+ #endif
+
+ #endif
+} wilc_wlan_oup_t;
+
+/********************************************
+ *
+ * Wlan Configuration ID
+ *
+ ********************************************/
+
+#define MAX_SSID_LEN 33
+#define MAX_RATES_SUPPORTED 12
+
+#define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF)
+
+#ifdef WILC_PARSE_SCAN_IN_HOST
+typedef enum {
+ SUPP_RATES_IE = 1,
+ EXT_SUPP_RATES_IE = 50,
+ HT_CAPABILITY_IE = 45,
+ RSN_IE = 48,
+ WPA_IE = 221,
+ WMM_IE = 221,
+ #ifdef WILC_P2P
+ P2P_IE = 221,
+ #endif
+} BEACON_IE;
+#endif
+typedef enum {
+ INFRASTRUCTURE = 0,
+ INDEPENDENT,
+ AP,
+} BSSTYPE_T;
+
+typedef enum {
+ RATE_AUTO = 0,
+ RATE_1MB = 1,
+ RATE_2MB = 2,
+ RATE_5MB = 5,
+ RATE_6MB = 6,
+ RATE_9MB = 9,
+ RATE_11MB = 11,
+ RATE_12MB = 12,
+ RATE_18MB = 18,
+ RATE_24MB = 24,
+ RATE_26MB = 36,
+ RATE_48MB = 48,
+ RATE_54MB = 54
+} TX_RATE_T;
+
+typedef enum {
+ B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */
+ G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */
+ G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */
+ G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */
+} G_OPERATING_MODE_T;
+
+typedef enum {
+ G_SHORT_PREAMBLE = 0, /* Short Preamble */
+ G_LONG_PREAMBLE = 1, /* Long Preamble */
+ G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
+} G_PREAMBLE_T;
+
+#define MAC_CONNECTED 1
+#define MAC_DISCONNECTED 0
+
+/*bug3819: */
+#define SCAN_DONE TRUE
+typedef enum {
+ PASSIVE_SCAN = 0,
+ ACTIVE_SCAN = 1,
+} SCANTYPE_T;
+
+typedef enum {
+ NO_POWERSAVE = 0,
+ MIN_FAST_PS = 1,
+ MAX_FAST_PS = 2,
+ MIN_PSPOLL_PS = 3,
+ MAX_PSPOLL_PS = 4
+} USER_PS_MODE_T;
+
+typedef enum {
+ CHIP_WAKEDUP = 0,
+ CHIP_SLEEPING_AUTO = 1,
+ CHIP_SLEEPING_MANUAL = 2
+} CHIP_PS_STATE_T;
+
+typedef enum {
+ ACQUIRE_ONLY = 0,
+ ACQUIRE_AND_WAKEUP = 1,
+} BUS_ACQUIRE_T;
+
+typedef enum {
+ RELEASE_ONLY = 0,
+ RELEASE_ALLOW_SLEEP = 1,
+} BUS_RELEASE_T;
+
+typedef enum {
+ NO_SECURITY = 0,
+ WEP_40 = 0x3,
+ WEP_104 = 0x7,
+ WPA_AES = 0x29,
+ WPA_TKIP = 0x49,
+ WPA_AES_TKIP = 0x69, /* Aes or Tkip */
+ WPA2_AES = 0x31,
+ WPA2_TKIP = 0x51,
+ WPA2_AES_TKIP = 0x71, /* Aes or Tkip */
+} SECURITY_T;
+
+typedef enum {
+ OPEN_SYSTEM = 1,
+ SHARED_KEY = 2,
+ ANY = 3,
+ IEEE8021 = 5
+} AUTHTYPE_T;
+
+typedef enum {
+ SITE_SURVEY_1CH = 0,
+ SITE_SURVEY_ALL_CH = 1,
+ SITE_SURVEY_OFF = 2
+} SITE_SURVEY_T;
+
+typedef enum {
+ NORMAL_ACK = 0,
+ NO_ACK,
+} ACK_POLICY_T;
+
+typedef enum {
+ DONT_RESET = 0,
+ DO_RESET = 1,
+ NO_REQUEST = 2,
+} RESET_REQ_T;
+
+typedef enum {
+ REKEY_DISABLE = 1,
+ REKEY_TIME_BASE,
+ REKEY_PKT_BASE,
+ REKEY_TIME_PKT_BASE
+} RSNA_REKEY_POLICY_T;
+
+typedef enum {
+ FILTER_NO = 0x00,
+ FILTER_AP_ONLY = 0x01,
+ FILTER_STA_ONLY = 0x02
+} SCAN_CLASS_FITLER_T;
+
+typedef enum {
+ PRI_HIGH_RSSI = 0x00,
+ PRI_LOW_RSSI = 0x04,
+ PRI_DETECT = 0x08
+} SCAN_PRI_T;
+
+typedef enum {
+ CH_FILTER_OFF = 0x00,
+ CH_FILTER_ON = 0x10
+} CH_FILTER_T;
+
+typedef enum {
+ AUTO_PROT = 0, /* Auto */
+ NO_PROT, /* Do not use any protection */
+ ERP_PROT, /* Protect all ERP frame exchanges */
+ HT_PROT, /* Protect all HT frame exchanges */
+ GF_PROT, /* Protect all GF frame exchanges */
+} N_PROTECTION_MODE_T;
+
+typedef enum {
+ G_SELF_CTS_PROT,
+ G_RTS_CTS_PROT,
+} G_PROTECTION_MODE_T;
+
+typedef enum {
+ HT_MIXED_MODE = 1,
+ HT_ONLY_20MHZ_MODE,
+ HT_ONLY_20_40MHZ_MODE,
+} N_OPERATING_MODE_T;
+
+typedef enum {
+ NO_DETECT = 0,
+ DETECT_ONLY = 1,
+ DETECT_PROTECT = 2,
+ DETECT_PROTECT_REPORT = 3,
+} N_OBSS_DETECTION_T;
+
+typedef enum {
+ RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
+ FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
+ LSIG_TXOP_PROT, /* LSIG TXOP Protection */
+ FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
+} N_PROTECTION_TYPE_T;
+
+typedef enum {
+ STATIC_MODE = 1,
+ DYNAMIC_MODE = 2,
+ MIMO_MODE = 3, /* power save disable */
+} N_SMPS_MODE_T;
+
+typedef enum {
+ DISABLE_SELF_CTS,
+ ENABLE_SELF_CTS,
+ DISABLE_TX_ABORT,
+ ENABLE_TX_ABORT,
+ HW_TRIGGER_ABORT,
+ SW_TRIGGER_ABORT,
+} TX_ABORT_OPTION_T;
+
+typedef enum {
+ WID_CHAR = 0,
+ WID_SHORT = 1,
+ WID_INT = 2,
+ WID_STR = 3,
+ WID_BIN_DATA = 4,
+ WID_BIN = 5,
+ WID_IP = 6,
+ WID_ADR = 7,
+ WID_UNDEF = 8,
+ WID_TYPE_FORCE_32BIT = 0xFFFFFFFF
+
+} WID_TYPE_T, tenuWIDtype;
+
+typedef enum {
+ WID_NIL = 0xffff,
+
+
+ /* BSS Type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Infrastructure Independent Access Point */
+ /* Values to set : 0 1 2 */
+ /* -------------------------------------------------------------- */
+ WID_BSS_TYPE = 0x0000,
+
+ /* Transmit Rate */
+ /* -------------------------------------------------------------- */
+ /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */
+ /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */
+ /* -------------------------------------------------------------- */
+ WID_CURRENT_TX_RATE = 0x0001,
+
+ /* Channel */
+ /* ------------------------------------------------------------------- */
+ /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
+ /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
+ /* -------------------------------------------------------------------- */
+ WID_CURRENT_CHANNEL = 0x0002,
+
+ /* Preamble */
+ /* -------------------------------------------------------------- */
+ /* Configuration : short long Auto */
+ /* Values to set : 0 1 2 */
+ /* -------------------------------------------------------------- */
+ WID_PREAMBLE = 0x0003,
+
+ /* 11g operating mode (ignored if 11g not present) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */
+ /* Values to set : 1 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11G_OPERATING_MODE = 0x0004,
+
+ /* Mac status (response only) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : disconnect connect */
+ /* Values to get : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_STATUS = 0x0005,
+
+ /* Scan type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Passive Scanning Active Scanning */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_SCAN_TYPE = 0x0007,
+
+ /* Key Id (WEP default key Id) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 0 to 3 */
+ /* Values to set : Same value. Default is 0 */
+ /* -------------------------------------------------------------- */
+ WID_KEY_ID = 0x0009,
+
+ /* QoS Enable */
+ /* -------------------------------------------------------------- */
+ /* Configuration : QoS Disable WMM Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_QOS_ENABLE = 0x000A,
+
+ /* Power Management */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */
+ /* Values to set : 0 1 2 */
+ /* ------------------------------------------------------------------ */
+ WID_POWER_MANAGEMENT = 0x000B,
+
+ /* WEP/802 11I Configuration */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */
+ /* Values (0x) : 00 03 07 29 49 31 51 */
+ /* */
+ /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */
+ /* Values (0x) : 69 71 */
+ /* ------------------------------------------------------------------ */
+ WID_11I_MODE = 0x000C,
+
+ /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Open System Shared Key Any Type | 802.1x Auth */
+ /* Values (0x) : 01 02 03 | BIT2 */
+ /* ------------------------------------------------------------------ */
+ WID_AUTH_TYPE = 0x000D,
+
+ /* Site Survey Type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Values to set */
+ /* Survey 1 Channel : 0 */
+ /* survey all Channels : 1 */
+ /* Disable Site Survey : 2 */
+ /* -------------------------------------------------------------- */
+ WID_SITE_SURVEY = 0x000E,
+
+ /* Listen Interval */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 1 to 255 */
+ /* Values to set : Same value. Default is 3 */
+ /* -------------------------------------------------------------- */
+ WID_LISTEN_INTERVAL = 0x000F,
+
+ /* DTIM Period */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 1 to 255 */
+ /* Values to set : Same value. Default is 3 */
+ /* -------------------------------------------------------------- */
+ WID_DTIM_PERIOD = 0x0010,
+
+ /* ACK Policy */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Normal Ack No Ack */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_ACK_POLICY = 0x0011,
+
+ /* Reset MAC (Set only) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Don't Reset Reset No Request */
+ /* Values to set : 0 1 2 */
+ /* -------------------------------------------------------------- */
+ WID_RESET = 0x0012,
+
+ /* Broadcast SSID Option: Setting this will adhere to "" SSID element */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Enable Disable */
+ /* Values to set : 1 0 */
+ /* ------------------------------------------------------------------ */
+ WID_BCAST_SSID = 0x0015,
+
+ /* Disconnect (Station) */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Association ID */
+ /* Values to set : Association ID */
+ /* ------------------------------------------------------------------ */
+ WID_DISCONNECT = 0x0016,
+
+ /* 11a Tx Power Level */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Sets TX Power (Higher the value greater the power) */
+ /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
+ /* -------------------------------------------------------------------- */
+ WID_TX_POWER_LEVEL_11A = 0x0018,
+
+ /* Group Key Update Policy Selection */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disabled timeBased packetBased timePacketBased */
+ /* Values to set : 1 2 3 4 */
+ /* -------------------------------------------------------------------- */
+ WID_REKEY_POLICY = 0x0019,
+
+ /* Allow Short Slot */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disallow Short Slot Allow Short Slot */
+ /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_SHORT_SLOT_ALLOWED = 0x001A,
+
+ WID_PHY_ACTIVE_REG = 0x001B,
+
+ /* 11b Tx Power Level */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Sets TX Power (Higher the value greater the power) */
+ /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
+ /* -------------------------------------------------------------------- */
+ WID_TX_POWER_LEVEL_11B = 0x001D,
+
+ /* Scan Request */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Request default scan */
+ /* Values to set : 0 */
+ /* -------------------------------------------------------------------- */
+ WID_START_SCAN_REQ = 0x001E,
+
+ /* Rssi (get only) */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : */
+ /* Values to get : Rssi value */
+ /* -------------------------------------------------------------------- */
+ WID_RSSI = 0x001F,
+
+ /* Join Request */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Request to join */
+ /* Values to set : index of scan result */
+ /* -------------------------------------------------------------------- */
+ WID_JOIN_REQ = 0x0020,
+
+ WID_LINKSPEED = 0x0026,
+
+ /* Enable User Control of TX Power */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------------- */
+ WID_USER_CONTROL_ON_TX_POWER = 0x0027,
+
+ WID_MEMORY_ACCESS_8BIT = 0x0029,
+
+ /* Enable Auto RX Sensitivity feature */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------------- */
+ WID_AUTO_RX_SENSITIVITY = 0x0032,
+
+ /* Receive Buffer Based Ack */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------------- */
+ WID_DATAFLOW_CONTROL = 0x0033,
+
+ /* Scan Filter */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Class No filter AP only Station Only */
+ /* Values to set : 0 1 2 */
+ /* Configuration : Priority High Rssi Low Rssi Detect */
+ /* Values to set : 0 0x4 0x08 */
+ /* Configuration : Channel filter off filter on */
+ /* Values to set : 0 0x10 */
+ /* -------------------------------------------------------------------- */
+ WID_SCAN_FILTER = 0x0036,
+
+ /* Link Loss Threshold (measure in the beacon period) */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */
+ /* Values to set : Same value. Default is 10 */
+ /* -------------------------------------------------------------------- */
+ WID_LINK_LOSS_THRESHOLD = 0x0037,
+
+ /*BugID_4978*/
+ WID_ABORT_RUNNING_SCAN = 0x003E,
+
+ /* NMAC Character WID list */
+ WID_WPS_START = 0x0043,
+
+ /* Protection mode for MAC */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Auto No protection ERP HT GF */
+ /* Values to set : 0 1 2 3 4 */
+ /* -------------------------------------------------------------- */
+ WID_11N_PROT_MECH = 0x0080,
+
+ /* ERP Protection type for MAC */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Self-CTS RTS-CTS */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_ERP_PROT_TYPE = 0x0081,
+
+ /* HT Option Enable */
+ /* -------------------------------------------------------------- */
+ /* Configuration : HT Enable HT Disable */
+ /* Values to set : 1 0 */
+ /* -------------------------------------------------------------- */
+ WID_11N_ENABLE = 0x0082,
+
+ /* 11n Operating mode (Note that 11g operating mode will also be */
+ /* used in addition to this, if this is set to HT Mixed mode) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */
+ /* Values to set : 1 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_OPERATING_MODE = 0x0083,
+
+ /* 11n OBSS non-HT STA Detection flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Do not detect */
+ /* Values to set : 0 */
+ /* Configuration : Detect, do not protect or report */
+ /* Values to set : 1 */
+ /* Configuration : Detect, protect and do not report */
+ /* Values to set : 2 */
+ /* Configuration : Detect, protect and report to other BSS */
+ /* Values to set : 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_OBSS_NONHT_DETECTION = 0x0084,
+
+ /* 11n HT Protection Type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */
+ /* Values to set : 0 1 */
+ /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */
+ /* Values to set : 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_HT_PROT_TYPE = 0x0085,
+
+ /* 11n RIFS Protection Enable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_RIFS_PROT_ENABLE = 0x0086,
+
+ /* SMPS Mode */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Static Dynamic MIMO (Power Save Disabled) */
+ /* Values to set : 1 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_SMPS_MODE = 0x0087,
+
+ /* Current transmit MCS */
+ /* -------------------------------------------------------------- */
+ /* Configuration : MCS Index for data rate */
+ /* Values to set : 0 to 7 */
+ /* -------------------------------------------------------------- */
+ WID_11N_CURRENT_TX_MCS = 0x0088,
+
+ WID_11N_PRINT_STATS = 0x0089,
+
+ /* 11n Short GI Enable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_SHORT_GI_ENABLE = 0x008D,
+
+ /* 11n RIFS Enable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_RIFS_MODE = 0x0094,
+
+ /* TX Abort Feature */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Self CTS Enable Self CTS */
+ /* Values to set : 0 1 */
+ /* Configuration : Disable TX Abort Enable TX Abort */
+ /* Values to set : 2 3 */
+ /* Configuration : Enable HW TX Abort Enable SW TX Abort */
+ /* Values to set : 4 5 */
+ /* -------------------------------------------------------------- */
+ WID_TX_ABORT_CONFIG = 0x00A1,
+
+ WID_REG_TSSI_11B_VALUE = 0x00A6,
+ WID_REG_TSSI_11G_VALUE = 0x00A7,
+ WID_REG_TSSI_11N_VALUE = 0x00A8,
+ WID_TX_CALIBRATION = 0x00A9,
+ WID_DSCR_TSSI_11B_VALUE = 0x00AA,
+ WID_DSCR_TSSI_11G_VALUE = 0x00AB,
+ WID_DSCR_TSSI_11N_VALUE = 0x00AC,
+
+ /* Immediate Block-Ack Support */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
+
+ /* TXOP Disable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 1 0 */
+ /* -------------------------------------------------------------- */
+ WID_11N_TXOP_PROT_DISABLE = 0x00B0,
+
+
+ WID_TX_POWER_LEVEL_11N = 0x00B1,
+
+ /* Custom Character WID list */
+ WID_PC_TEST_MODE = 0x00C8,
+ /*bug3819: */
+ /* SCAN Complete notification WID*/
+ WID_SCAN_COMPLETE = 0x00C9,
+
+#ifdef WILC_AP_EXTERNAL_MLME
+ WID_DEL_BEACON = 0x00CA,
+#endif
+
+ WID_LOGTerminal_Switch = 0x00CD,
+ /* EMAC Short WID list */
+ /* RTS Threshold */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 256 to 2347 */
+ /* Values to set : Same value. Default is 2347 */
+ /* -------------------------------------------------------------- */
+ WID_RTS_THRESHOLD = 0x1000,
+
+ /* Fragmentation Threshold */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 256 to 2346 */
+ /* Values to set : Same value. Default is 2346 */
+ /* -------------------------------------------------------------- */
+ WID_FRAG_THRESHOLD = 0x1001,
+
+ WID_SHORT_RETRY_LIMIT = 0x1002,
+ WID_LONG_RETRY_LIMIT = 0x1003,
+ WID_BEACON_INTERVAL = 0x1006,
+ WID_MEMORY_ACCESS_16BIT = 0x1008,
+ WID_RX_SENSE = 0x100B,
+ WID_ACTIVE_SCAN_TIME = 0x100C,
+ WID_PASSIVE_SCAN_TIME = 0x100D,
+
+ WID_SITE_SURVEY_SCAN_TIME = 0x100E,
+ WID_JOIN_START_TIMEOUT = 0x100F,
+ WID_AUTH_TIMEOUT = 0x1010,
+ WID_ASOC_TIMEOUT = 0x1011,
+ WID_11I_PROTOCOL_TIMEOUT = 0x1012,
+ WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
+
+ /* NMAC Short WID list */
+ WID_11N_SIG_QUAL_VAL = 0x1085,
+ WID_CCA_THRESHOLD = 0x1087,
+
+ /* Custom Short WID list */
+
+ /* EMAC Integer WID list */
+ WID_FAILED_COUNT = 0x2000,
+ WID_RETRY_COUNT = 0x2001,
+ WID_MULTIPLE_RETRY_COUNT = 0x2002,
+ WID_FRAME_DUPLICATE_COUNT = 0x2003,
+ WID_ACK_FAILURE_COUNT = 0x2004,
+ WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
+ WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
+ WID_FCS_ERROR_COUNT = 0x2007,
+ WID_SUCCESS_FRAME_COUNT = 0x2008,
+ WID_HUT_TX_COUNT = 0x200A,
+ WID_TX_FRAGMENT_COUNT = 0x200B,
+ WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
+ WID_RTS_SUCCESS_COUNT = 0x200D,
+ WID_RTS_FAILURE_COUNT = 0x200E,
+ WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
+ WID_REKEY_PERIOD = 0x2010,
+ WID_REKEY_PACKET_COUNT = 0x2011,
+ WID_1X_SERV_ADDR = 0x2012,
+ WID_STACK_IP_ADDR = 0x2013,
+ WID_STACK_NETMASK_ADDR = 0x2014,
+ WID_HW_RX_COUNT = 0x2015,
+ WID_MEMORY_ADDRESS = 0x201E,
+ WID_MEMORY_ACCESS_32BIT = 0x201F,
+ WID_RF_REG_VAL = 0x2021,
+
+
+ /* NMAC Integer WID list */
+ WID_11N_PHY_ACTIVE_REG_VAL = 0x2080,
+
+ /* Custom Integer WID list */
+ WID_GET_INACTIVE_TIME = 0x2084,
+ WID_SET_DRV_HANDLER = 0X2085,
+ WID_SET_OPERATION_MODE = 0X2086,
+ /* EMAC String WID list */
+ WID_SSID = 0x3000,
+ WID_FIRMWARE_VERSION = 0x3001,
+ WID_OPERATIONAL_RATE_SET = 0x3002,
+ WID_BSSID = 0x3003,
+ WID_WEP_KEY_VALUE = 0x3004,
+ WID_11I_PSK = 0x3008,
+ WID_11E_P_ACTION_REQ = 0x3009,
+ WID_1X_KEY = 0x300A,
+ WID_HARDWARE_VERSION = 0x300B,
+ WID_MAC_ADDR = 0x300C,
+ WID_HUT_DEST_ADDR = 0x300D,
+ WID_PHY_VERSION = 0x300F,
+ WID_SUPP_USERNAME = 0x3010,
+ WID_SUPP_PASSWORD = 0x3011,
+ WID_SITE_SURVEY_RESULTS = 0x3012,
+ WID_RX_POWER_LEVEL = 0x3013,
+ WID_DEL_ALL_RX_BA = 0x3014,
+ WID_SET_STA_MAC_INACTIVE_TIME = 0x3017,
+ WID_ADD_WEP_KEY = 0x3019,
+ WID_REMOVE_WEP_KEY = 0x301A,
+ WID_ADD_PTK = 0x301B,
+ WID_ADD_RX_GTK = 0x301C,
+ WID_ADD_TX_GTK = 0x301D,
+ WID_REMOVE_KEY = 0x301E,
+ WID_ASSOC_REQ_INFO = 0x301F,
+ WID_ASSOC_RES_INFO = 0x3020,
+ WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
+ WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
+ WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
+ WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
+
+ /* NMAC String WID list */
+ WID_11N_P_ACTION_REQ = 0x3080,
+ WID_HUT_TEST_ID = 0x3081,
+ WID_PMKID_INFO = 0x3082,
+ WID_FIRMWARE_INFO = 0x3083,
+ #ifdef WILC_P2P
+ WID_REGISTER_FRAME = 0x3084,
+ #endif
+ WID_DEL_ALL_STA = 0x3085,
+ #ifdef WILC_P2P
+ WID_REMAIN_ON_CHAN = 0x3996,
+ #endif
+ /*BugID_4156*/
+ WID_SSID_PROBE_REQ = 0x3997,
+ /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/
+ WID_JOIN_REQ_EXTENDED = 0x3998,
+
+ /* BugID 4951: WID toset IP address in firmware */
+ WID_IP_ADDRESS = 0x3999,
+
+
+
+ /* Custom String WID list */
+
+ /* EMAC Binary WID list */
+ WID_UAPSD_CONFIG = 0x4001,
+ WID_UAPSD_STATUS = 0x4002,
+ WID_WMM_AP_AC_PARAMS = 0x4003,
+ WID_WMM_STA_AC_PARAMS = 0x4004,
+ WID_NETWORK_INFO = 0x4005,
+ WID_STA_JOIN_INFO = 0x4006,
+ WID_CONNECTED_STA_LIST = 0x4007,
+
+ /* NMAC Binary WID list */
+ WID_11N_AUTORATE_TABLE = 0x4080,
+
+
+ /*Added here by Amr - BugID 4134*/
+ WID_SCAN_CHANNEL_LIST = 0x4084,
+
+ /*BugID_3746 WID to add IE to be added in next probe request*/
+ WID_INFO_ELEMENT_PROBE = 0x4085,
+ /*BugID_3746 WID to add IE to be added in next associate request*/
+ WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
+ WID_ADD_STA = 0X4087,
+ WID_REMOVE_STA = 0X4088,
+ WID_EDIT_STA = 0X4089,
+ WID_ADD_BEACON = 0x408a,
+
+ /* BugID 5108 */
+ WID_SETUP_MULTICAST_FILTER = 0x408b,
+
+ /* Miscellaneous WIDs */
+ WID_ALL = 0x7FFE,
+ WID_MAX = 0xFFFF
+} WID_T;
+
+int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup);
+
+void wilc_bus_set_max_speed(void);
+void wilc_bus_set_default_speed(void);
+uint32_t wilc_get_chipid(uint8_t update);
+
+
+#endif
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.