diff options
Diffstat (limited to 'drivers/thermal/thermal_sys.c')
| -rw-r--r-- | drivers/thermal/thermal_sys.c | 356 |
1 files changed, 341 insertions, 15 deletions
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 8171ca17b936..d0b093b66adc 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -30,6 +30,7 @@ #include <linux/idr.h> #include <linux/thermal.h> #include <linux/spinlock.h> +#include <linux/reboot.h> MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); @@ -104,22 +105,36 @@ static ssize_t temp_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_zone_device *tz = to_thermal_zone(dev); + long temperature; + int ret; if (!tz->ops->get_temp) return -EPERM; - return tz->ops->get_temp(tz, buf); + ret = tz->ops->get_temp(tz, &temperature); + + if (ret) + return ret; + + return sprintf(buf, "%ld\n", temperature); } static ssize_t mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_zone_device *tz = to_thermal_zone(dev); + enum thermal_device_mode mode; + int result; if (!tz->ops->get_mode) return -EPERM; - return tz->ops->get_mode(tz, buf); + result = tz->ops->get_mode(tz, &mode); + if (result) + return result; + + return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled" + : "disabled"); } static ssize_t @@ -132,7 +147,13 @@ mode_store(struct device *dev, struct device_attribute *attr, if (!tz->ops->set_mode) return -EPERM; - result = tz->ops->set_mode(tz, buf); + if (!strncmp(buf, "enabled", sizeof("enabled"))) + result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); + else if (!strncmp(buf, "disabled", sizeof("disabled"))) + result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); + else + result = -EINVAL; + if (result) return result; @@ -144,7 +165,8 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_zone_device *tz = to_thermal_zone(dev); - int trip; + enum thermal_trip_type type; + int trip, result; if (!tz->ops->get_trip_type) return -EPERM; @@ -152,7 +174,22 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) return -EINVAL; - return tz->ops->get_trip_type(tz, trip, buf); + result = tz->ops->get_trip_type(tz, trip, &type); + if (result) + return result; + + switch (type) { + case THERMAL_TRIP_CRITICAL: + return sprintf(buf, "critical"); + case THERMAL_TRIP_HOT: + return sprintf(buf, "hot"); + case THERMAL_TRIP_PASSIVE: + return sprintf(buf, "passive"); + case THERMAL_TRIP_ACTIVE: + return sprintf(buf, "active"); + default: + return sprintf(buf, "unknown"); + } } static ssize_t @@ -160,7 +197,8 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_zone_device *tz = to_thermal_zone(dev); - int trip; + int trip, ret; + long temperature; if (!tz->ops->get_trip_temp) return -EPERM; @@ -168,12 +206,77 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr, if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip)) return -EINVAL; - return tz->ops->get_trip_temp(tz, trip, buf); + ret = tz->ops->get_trip_temp(tz, trip, &temperature); + + if (ret) + return ret; + + return sprintf(buf, "%ld\n", temperature); +} + +static ssize_t +passive_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + struct thermal_cooling_device *cdev = NULL; + int state; + + if (!sscanf(buf, "%d\n", &state)) + return -EINVAL; + + if (state && !tz->forced_passive) { + mutex_lock(&thermal_list_lock); + list_for_each_entry(cdev, &thermal_cdev_list, node) { + if (!strncmp("Processor", cdev->type, + sizeof("Processor"))) + thermal_zone_bind_cooling_device(tz, + THERMAL_TRIPS_NONE, + cdev); + } + mutex_unlock(&thermal_list_lock); + } else if (!state && tz->forced_passive) { + mutex_lock(&thermal_list_lock); + list_for_each_entry(cdev, &thermal_cdev_list, node) { + if (!strncmp("Processor", cdev->type, + sizeof("Processor"))) + thermal_zone_unbind_cooling_device(tz, + THERMAL_TRIPS_NONE, + cdev); + } + mutex_unlock(&thermal_list_lock); + } + + tz->tc1 = 1; + tz->tc2 = 1; + + if (!tz->passive_delay) + tz->passive_delay = 1000; + + if (!tz->polling_delay) + tz->polling_delay = 10000; + + tz->forced_passive = state; + + thermal_zone_device_update(tz); + + return count; +} + +static ssize_t +passive_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + return sprintf(buf, "%d\n", tz->forced_passive); } static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); +static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \ + passive_store); static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), @@ -236,8 +339,13 @@ thermal_cooling_device_max_state_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_cooling_device *cdev = to_cooling_device(dev); + unsigned long state; + int ret; - return cdev->ops->get_max_state(cdev, buf); + ret = cdev->ops->get_max_state(cdev, &state); + if (ret) + return ret; + return sprintf(buf, "%ld\n", state); } static ssize_t @@ -245,8 +353,13 @@ thermal_cooling_device_cur_state_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_cooling_device *cdev = to_cooling_device(dev); + unsigned long state; + int ret; - return cdev->ops->get_cur_state(cdev, buf); + ret = cdev->ops->get_cur_state(cdev, &state); + if (ret) + return ret; + return sprintf(buf, "%ld\n", state); } static ssize_t @@ -255,10 +368,10 @@ thermal_cooling_device_cur_state_store(struct device *dev, const char *buf, size_t count) { struct thermal_cooling_device *cdev = to_cooling_device(dev); - int state; + unsigned long state; int result; - if (!sscanf(buf, "%d\n", &state)) + if (!sscanf(buf, "%ld\n", &state)) return -EINVAL; if (state < 0) @@ -312,13 +425,20 @@ static DEVICE_ATTR(name, 0444, name_show, NULL); static ssize_t temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) { + long temperature; + int ret; struct thermal_hwmon_attr *hwmon_attr = container_of(attr, struct thermal_hwmon_attr, attr); struct thermal_zone_device *tz = container_of(hwmon_attr, struct thermal_zone_device, temp_input); - return tz->ops->get_temp(tz, buf); + ret = tz->ops->get_temp(tz, &temperature); + + if (ret) + return ret; + + return sprintf(buf, "%ld\n", temperature); } static ssize_t @@ -330,8 +450,14 @@ temp_crit_show(struct device *dev, struct device_attribute *attr, struct thermal_zone_device *tz = container_of(hwmon_attr, struct thermal_zone_device, temp_crit); + long temperature; + int ret; + + ret = tz->ops->get_trip_temp(tz, 0, &temperature); + if (ret) + return ret; - return tz->ops->get_trip_temp(tz, 0, buf); + return sprintf(buf, "%ld\n", temperature); } @@ -452,6 +578,97 @@ thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) } #endif +static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, + int delay) +{ + cancel_delayed_work(&(tz->poll_queue)); + + if (!delay) + return; + + if (delay > 1000) + schedule_delayed_work(&(tz->poll_queue), + round_jiffies(msecs_to_jiffies(delay))); + else + schedule_delayed_work(&(tz->poll_queue), + msecs_to_jiffies(delay)); +} + +static void thermal_zone_device_passive(struct thermal_zone_device *tz, + int temp, int trip_temp, int trip) +{ + int trend = 0; + struct thermal_cooling_device_instance *instance; + struct thermal_cooling_device *cdev; + long state, max_state; + + /* + * Above Trip? + * ----------- + * Calculate the thermal trend (using the passive cooling equation) + * and modify the performance limit for all passive cooling devices + * accordingly. Note that we assume symmetry. + */ + if (temp >= trip_temp) { + tz->passive = true; + + trend = (tz->tc1 * (temp - tz->last_temperature)) + + (tz->tc2 * (temp - trip_temp)); + + /* Heating up? */ + if (trend > 0) { + list_for_each_entry(instance, &tz->cooling_devices, + node) { + if (instance->trip != trip) + continue; + cdev = instance->cdev; + cdev->ops->get_cur_state(cdev, &state); + cdev->ops->get_max_state(cdev, &max_state); + if (state++ < max_state) + cdev->ops->set_cur_state(cdev, state); + } + } else if (trend < 0) { /* Cooling off? */ + list_for_each_entry(instance, &tz->cooling_devices, + node) { + if (instance->trip != trip) + continue; + cdev = instance->cdev; + cdev->ops->get_cur_state(cdev, &state); + cdev->ops->get_max_state(cdev, &max_state); + if (state > 0) + cdev->ops->set_cur_state(cdev, --state); + } + } + return; + } + + /* + * Below Trip? + * ----------- + * Implement passive cooling hysteresis to slowly increase performance + * and avoid thrashing around the passive trip point. Note that we + * assume symmetry. + */ + list_for_each_entry(instance, &tz->cooling_devices, node) { + if (instance->trip != trip) + continue; + cdev = instance->cdev; + cdev->ops->get_cur_state(cdev, &state); + cdev->ops->get_max_state(cdev, &max_state); + if (state > 0) + cdev->ops->set_cur_state(cdev, --state); + if (state == 0) + tz->passive = false; + } +} + +static void thermal_zone_device_check(struct work_struct *work) +{ + struct thermal_zone_device *tz = container_of(work, struct + thermal_zone_device, + poll_queue.work); + thermal_zone_device_update(tz); +} /** * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone @@ -722,25 +939,113 @@ void thermal_cooling_device_unregister(struct EXPORT_SYMBOL(thermal_cooling_device_unregister); /** + * thermal_zone_device_update - force an update of a thermal zone's state + * @ttz: the thermal zone to update + */ + +void thermal_zone_device_update(struct thermal_zone_device *tz) +{ + int count, ret = 0; + long temp, trip_temp; + enum thermal_trip_type trip_type; + struct thermal_cooling_device_instance *instance; + struct thermal_cooling_device *cdev; + + mutex_lock(&tz->lock); + + tz->ops->get_temp(tz, &temp); + + for (count = 0; count < tz->trips; count++) { + tz->ops->get_trip_type(tz, count, &trip_type); + tz->ops->get_trip_temp(tz, count, &trip_temp); + + switch (trip_type) { + case THERMAL_TRIP_CRITICAL: + if (temp > trip_temp) { + if (tz->ops->notify) + ret = tz->ops->notify(tz, count, + trip_type); + if (!ret) { + printk(KERN_EMERG + "Critical temperature reached (%ld C), shutting down.\n", + temp/1000); + orderly_poweroff(true); + } + } + break; + case THERMAL_TRIP_HOT: + if (temp > trip_temp) + if (tz->ops->notify) + tz->ops->notify(tz, count, trip_type); + break; + case THERMAL_TRIP_ACTIVE: + list_for_each_entry(instance, &tz->cooling_devices, + node) { + if (instance->trip != count) + continue; + + cdev = instance->cdev; + + if (temp > trip_temp) + cdev->ops->set_cur_state(cdev, 1); + else + cdev->ops->set_cur_state(cdev, 0); + } + break; + case THERMAL_TRIP_PASSIVE: + if (temp > trip_temp || tz->passive) + thermal_zone_device_passive(tz, temp, + trip_temp, count); + break; + } + } + + if (tz->forced_passive) + thermal_zone_device_passive(tz, temp, tz->forced_passive, + THERMAL_TRIPS_NONE); + + tz->last_temperature = temp; + if (tz->passive) + thermal_zone_device_set_polling(tz, tz->passive_delay); + else if (tz->polling_delay) + thermal_zone_device_set_polling(tz, tz->polling_delay); + mutex_unlock(&tz->lock); +} +EXPORT_SYMBOL(thermal_zone_device_update); + +/** * thermal_zone_device_register - register a new thermal zone device * @type: the thermal zone device type * @trips: the number of trip points the thermal zone support * @devdata: private device data * @ops: standard thermal zone device callbacks + * @tc1: thermal coefficient 1 for passive calculations + * @tc2: thermal coefficient 2 for passive calculations + * @passive_delay: number of milliseconds to wait between polls when + * performing passive cooling + * @polling_delay: number of milliseconds to wait between polls when checking + * whether trip points have been crossed (0 for interrupt + * driven systems) * * thermal_zone_device_unregister() must be called when the device is no - * longer needed. + * longer needed. The passive cooling formula uses tc1 and tc2 as described in + * section 11.1.5.1 of the ACPI specification 3.0. */ struct thermal_zone_device *thermal_zone_device_register(char *type, int trips, void *devdata, struct thermal_zone_device_ops - *ops) + *ops, int tc1, int + tc2, + int passive_delay, + int polling_delay) { struct thermal_zone_device *tz; struct thermal_cooling_device *pos; + enum thermal_trip_type trip_type; int result; int count; + int passive = 0; if (strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -769,6 +1074,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, tz->device.class = &thermal_class; tz->devdata = devdata; tz->trips = trips; + tz->tc1 = tc1; + tz->tc2 = tc2; + tz->passive_delay = passive_delay; + tz->polling_delay = polling_delay; + dev_set_name(&tz->device, "thermal_zone%d", tz->id); result = device_register(&tz->device); if (result) { @@ -798,8 +1108,18 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, TRIP_POINT_ATTR_ADD(&tz->device, count, result); if (result) goto unregister; + tz->ops->get_trip_type(tz, count, &trip_type); + if (trip_type == THERMAL_TRIP_PASSIVE) + passive = 1; } + if (!passive) + result = device_create_file(&tz->device, + &dev_attr_passive); + + if (result) + goto unregister; + result = thermal_add_hwmon_sysfs(tz); if (result) goto unregister; @@ -814,6 +1134,10 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, } mutex_unlock(&thermal_list_lock); + INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check); + + thermal_zone_device_update(tz); + if (!result) return tz; @@ -853,6 +1177,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) tz->ops->unbind(tz, cdev); mutex_unlock(&thermal_list_lock); + thermal_zone_device_set_polling(tz, 0); + if (tz->type[0]) device_remove_file(&tz->device, &dev_attr_type); device_remove_file(&tz->device, &dev_attr_temp); |