aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/8250/8250_dw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250_dw.c')
-rw-r--r--drivers/tty/serial/8250/8250_dw.c137
1 files changed, 78 insertions, 59 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a5d319e4aae6..a3fb95d85d7c 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -68,12 +68,6 @@ struct dw8250_data {
unsigned int uart_16550_compatible:1;
};
-#define BYT_PRV_CLK 0x800
-#define BYT_PRV_CLK_EN (1 << 0)
-#define BYT_PRV_CLK_M_VAL_SHIFT 1
-#define BYT_PRV_CLK_N_VAL_SHIFT 16
-#define BYT_PRV_CLK_UPDATE (1 << 31)
-
static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
@@ -95,25 +89,45 @@ static void dw8250_force_idle(struct uart_port *p)
(void)p->serial_in(p, UART_RX);
}
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+static void dw8250_check_lcr(struct uart_port *p, int value)
{
- writeb(value, p->membase + (offset << p->regshift));
+ void __iomem *offset = p->membase + (UART_LCR << p->regshift);
+ int tries = 1000;
/* Make sure LCR write wasn't ignored */
- if (offset == UART_LCR) {
- int tries = 1000;
- while (tries--) {
- unsigned int lcr = p->serial_in(p, UART_LCR);
- if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
- return;
- dw8250_force_idle(p);
- writeb(value, p->membase + (UART_LCR << p->regshift));
- }
- /*
- * FIXME: this deadlocks if port->lock is already held
- * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
- */
+ while (tries--) {
+ unsigned int lcr = p->serial_in(p, UART_LCR);
+
+ if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
+ return;
+
+ dw8250_force_idle(p);
+
+#ifdef CONFIG_64BIT
+ __raw_writeq(value & 0xff, offset);
+#else
+ if (p->iotype == UPIO_MEM32)
+ writel(value, offset);
+ else if (p->iotype == UPIO_MEM32BE)
+ iowrite32be(value, offset);
+ else
+ writeb(value, offset);
+#endif
}
+ /*
+ * FIXME: this deadlocks if port->lock is already held
+ * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ */
+}
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ writeb(value, p->membase + (offset << p->regshift));
+
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
}
static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
@@ -135,49 +149,26 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
{
+ struct dw8250_data *d = p->private_data;
+
value &= 0xff;
__raw_writeq(value, p->membase + (offset << p->regshift));
/* Read back to ensure register write ordering. */
__raw_readq(p->membase + (UART_LCR << p->regshift));
- /* Make sure LCR write wasn't ignored */
- if (offset == UART_LCR) {
- int tries = 1000;
- while (tries--) {
- unsigned int lcr = p->serial_in(p, UART_LCR);
- if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
- return;
- dw8250_force_idle(p);
- __raw_writeq(value & 0xff,
- p->membase + (UART_LCR << p->regshift));
- }
- /*
- * FIXME: this deadlocks if port->lock is already held
- * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
- */
- }
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
}
#endif /* CONFIG_64BIT */
static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
+ struct dw8250_data *d = p->private_data;
+
writel(value, p->membase + (offset << p->regshift));
- /* Make sure LCR write wasn't ignored */
- if (offset == UART_LCR) {
- int tries = 1000;
- while (tries--) {
- unsigned int lcr = p->serial_in(p, UART_LCR);
- if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
- return;
- dw8250_force_idle(p);
- writel(value, p->membase + (UART_LCR << p->regshift));
- }
- /*
- * FIXME: this deadlocks if port->lock is already held
- * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
- */
- }
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
}
static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
@@ -187,14 +178,33 @@ static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
return dw8250_modify_msr(p, offset, value);
}
+static void dw8250_serial_out32be(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ iowrite32be(value, p->membase + (offset << p->regshift));
+
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
+}
+
+static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
+{
+ unsigned int value = ioread32be(p->membase + (offset << p->regshift));
+
+ return dw8250_modify_msr(p, offset, value);
+}
+
+
static int dw8250_handle_irq(struct uart_port *p)
{
struct dw8250_data *d = p->private_data;
unsigned int iir = p->serial_in(p, UART_IIR);
- if (serial8250_handle_irq(p, iir)) {
+ if (serial8250_handle_irq(p, iir))
return 1;
- } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+
+ if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* Clear the USR */
(void)p->serial_in(p, d->usr_reg);
@@ -281,6 +291,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
data->skip_autocfg = true;
}
#endif
+ if (of_device_is_big_endian(p->dev->of_node)) {
+ p->iotype = UPIO_MEM32BE;
+ p->serial_in = dw8250_serial_in32be;
+ p->serial_out = dw8250_serial_out32be;
+ }
} else if (has_acpi_companion(p->dev)) {
p->iotype = UPIO_MEM32;
p->regshift = 2;
@@ -309,14 +324,20 @@ static void dw8250_setup_port(struct uart_port *p)
* If the Component Version Register returns zero, we know that
* ADDITIONAL_FEATURES are not enabled. No need to go any further.
*/
- reg = readl(p->membase + DW_UART_UCV);
+ if (p->iotype == UPIO_MEM32BE)
+ reg = ioread32be(p->membase + DW_UART_UCV);
+ else
+ reg = readl(p->membase + DW_UART_UCV);
if (!reg)
return;
dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
- reg = readl(p->membase + DW_UART_CPR);
+ if (p->iotype == UPIO_MEM32BE)
+ reg = ioread32be(p->membase + DW_UART_CPR);
+ else
+ reg = readl(p->membase + DW_UART_CPR);
if (!reg)
return;
@@ -463,10 +484,8 @@ static int dw8250_probe(struct platform_device *pdev)
dw8250_quirks(p, data);
/* If the Busy Functionality is not implemented, don't handle it */
- if (data->uart_16550_compatible) {
- p->serial_out = NULL;
+ if (data->uart_16550_compatible)
p->handle_irq = NULL;
- }
if (!data->skip_autocfg)
dw8250_setup_port(p);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.