aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/8250
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r--drivers/tty/serial/8250/8250_aspeed_vuart.c6
-rw-r--r--drivers/tty/serial/8250/8250_bcm2835aux.c50
-rw-r--r--drivers/tty/serial/8250/8250_core.c6
-rw-r--r--drivers/tty/serial/8250/8250_exar.c39
-rw-r--r--drivers/tty/serial/8250/8250_fsl.c4
-rw-r--r--drivers/tty/serial/8250/8250_gsc.c2
-rw-r--r--drivers/tty/serial/8250/8250_ioc3.c98
-rw-r--r--drivers/tty/serial/8250/8250_of.c5
-rw-r--r--drivers/tty/serial/8250/8250_omap.c7
-rw-r--r--drivers/tty/serial/8250/8250_pci.c6
-rw-r--r--drivers/tty/serial/8250/8250_port.c14
-rw-r--r--drivers/tty/serial/8250/Kconfig21
-rw-r--r--drivers/tty/serial/8250/Makefile1
13 files changed, 204 insertions, 55 deletions
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 6e67fd89445a..c33e02cbde93 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -5,10 +5,6 @@
* Copyright (C) 2016 Jeremy Kerr <jk@ozlabs.org>, IBM Corp.
* Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
*/
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/device.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -406,6 +402,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.unthrottle = aspeed_vuart_unthrottle;
port.port.status = UPSTAT_SYNC_FIFO;
port.port.dev = &pdev->dev;
+ port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
if (rc < 0)
@@ -449,7 +446,6 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.line = rc;
port.port.irq = irq_of_parse_and_map(np, 0);
- port.port.irqflags = IRQF_SHARED;
port.port.handle_irq = aspeed_vuart_handle_irq;
port.port.iotype = UPIO_MEM;
port.port.type = PORT_16550A;
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index 8ce700c1a7fc..e70e3cc30050 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -16,14 +16,19 @@
#include "8250.h"
+/**
+ * struct bcm2835aux_data - driver private data of BCM2835 auxiliary UART
+ * @clk: clock producer of the port's uartclk
+ * @line: index of the port's serial8250_ports[] entry
+ */
struct bcm2835aux_data {
- struct uart_8250_port uart;
struct clk *clk;
int line;
};
static int bcm2835aux_serial_probe(struct platform_device *pdev)
{
+ struct uart_8250_port up = { };
struct bcm2835aux_data *data;
struct resource *res;
int ret;
@@ -34,23 +39,21 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
return -ENOMEM;
/* initialize data */
- spin_lock_init(&data->uart.port.lock);
- data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
- data->uart.port.dev = &pdev->dev;
- data->uart.port.regshift = 2;
- data->uart.port.type = PORT_16550;
- data->uart.port.iotype = UPIO_MEM;
- data->uart.port.fifosize = 8;
- data->uart.port.flags = UPF_SHARE_IRQ |
- UPF_FIXED_PORT |
- UPF_FIXED_TYPE |
- UPF_SKIP_TEST;
+ up.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
+ up.port.dev = &pdev->dev;
+ up.port.regshift = 2;
+ up.port.type = PORT_16550;
+ up.port.iotype = UPIO_MEM;
+ up.port.fifosize = 8;
+ up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE |
+ UPF_SKIP_TEST | UPF_IOREMAP;
/* get the clock - this also enables the HW */
data->clk = devm_clk_get(&pdev->dev, NULL);
ret = PTR_ERR_OR_ZERO(data->clk);
if (ret) {
- dev_err(&pdev->dev, "could not get clk: %d\n", ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "could not get clk: %d\n", ret);
return ret;
}
@@ -58,7 +61,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
ret = platform_get_irq(pdev, 0);
if (ret < 0)
return ret;
- data->uart.port.irq = ret;
+ up.port.irq = ret;
/* map the main registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -66,15 +69,13 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "memory resource not found");
return -EINVAL;
}
- data->uart.port.membase = devm_ioremap_resource(&pdev->dev, res);
- ret = PTR_ERR_OR_ZERO(data->uart.port.membase);
- if (ret)
- return ret;
+ up.port.mapbase = res->start;
+ up.port.mapsize = resource_size(res);
/* Check for a fixed line number */
ret = of_alias_get_id(pdev->dev.of_node, "serial");
if (ret >= 0)
- data->uart.port.line = ret;
+ up.port.line = ret;
/* enable the clock as a last step */
ret = clk_prepare_enable(data->clk);
@@ -89,13 +90,14 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
* so we have to multiply the actual clock by 2
* to get identical baudrates.
*/
- data->uart.port.uartclk = clk_get_rate(data->clk) * 2;
+ up.port.uartclk = clk_get_rate(data->clk) * 2;
/* register the port */
- ret = serial8250_register_8250_port(&data->uart);
+ ret = serial8250_register_8250_port(&up);
if (ret < 0) {
- dev_err(&pdev->dev, "unable to register 8250 port - %d\n",
- ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "unable to register 8250 port - %d\n", ret);
goto dis_clk;
}
data->line = ret;
@@ -113,7 +115,7 @@ static int bcm2835aux_serial_remove(struct platform_device *pdev)
{
struct bcm2835aux_data *data = platform_get_drvdata(pdev);
- serial8250_unregister_port(data->uart.port.line);
+ serial8250_unregister_port(data->line);
clk_disable_unprepare(data->clk);
return 0;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e682390ce0de..f2a33c9082a6 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -174,7 +174,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
struct hlist_head *h;
struct hlist_node *n;
struct irq_info *i;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+ int ret;
mutex_lock(&hash_mutex);
@@ -209,9 +209,8 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
INIT_LIST_HEAD(&up->list);
i->head = &up->list;
spin_unlock_irq(&i->lock);
- irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt,
- irq_flags, up->port.name, i);
+ up->port.irqflags, up->port.name, i);
if (ret < 0)
serial_do_unlink(i, up);
}
@@ -816,6 +815,7 @@ static int serial8250_probe(struct platform_device *dev)
uart.port.flags = p->flags;
uart.port.mapbase = p->mapbase;
uart.port.hub6 = p->hub6;
+ uart.port.has_sysrq = p->has_sysrq;
uart.port.private_data = p->private_data;
uart.port.type = p->type;
uart.port.serial_in = p->serial_in;
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 108cd55f9c4d..d330da76d6b6 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -25,6 +25,14 @@
#include "8250.h"
+#define PCI_DEVICE_ID_ACCES_COM_2S 0x1052
+#define PCI_DEVICE_ID_ACCES_COM_4S 0x105d
+#define PCI_DEVICE_ID_ACCES_COM_8S 0x106c
+#define PCI_DEVICE_ID_ACCES_COM232_8 0x10a8
+#define PCI_DEVICE_ID_ACCES_COM_2SM 0x10d2
+#define PCI_DEVICE_ID_ACCES_COM_4SM 0x10db
+#define PCI_DEVICE_ID_ACCES_COM_8SM 0x10ea
+
#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002
#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004
#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a
@@ -186,7 +194,7 @@ static int xr17v35x_startup(struct uart_port *port)
static void exar_shutdown(struct uart_port *port)
{
unsigned char lsr;
- bool tx_complete = 0;
+ bool tx_complete = false;
struct uart_8250_port *up = up_to_u8250p(port);
struct circ_buf *xmit = &port->state->xmit;
int i = 0;
@@ -194,9 +202,9 @@ static void exar_shutdown(struct uart_port *port)
do {
lsr = serial_in(up, UART_LSR);
if (lsr & (UART_LSR_TEMT | UART_LSR_THRE))
- tx_complete = 1;
+ tx_complete = true;
else
- tx_complete = 0;
+ tx_complete = false;
usleep_range(1000, 1100);
} while (!uart_circ_empty(xmit) && !tx_complete && i++ < 1000);
@@ -677,6 +685,22 @@ static int __maybe_unused exar_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume);
+static const struct exar8250_board acces_com_2x = {
+ .num_ports = 2,
+ .setup = pci_xr17c154_setup,
+};
+
+static const struct exar8250_board acces_com_4x = {
+ .num_ports = 4,
+ .setup = pci_xr17c154_setup,
+};
+
+static const struct exar8250_board acces_com_8x = {
+ .num_ports = 8,
+ .setup = pci_xr17c154_setup,
+};
+
+
static const struct exar8250_board pbn_fastcom335_2 = {
.num_ports = 2,
.setup = pci_fastcom335_setup,
@@ -745,6 +769,15 @@ static const struct exar8250_board pbn_exar_XR17V8358 = {
}
static const struct pci_device_id exar_pci_tbl[] = {
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_2S, acces_com_2x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_4S, acces_com_4x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_8S, acces_com_8x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM232_8, acces_com_8x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_2SM, acces_com_2x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_4SM, acces_com_4x),
+ EXAR_DEVICE(ACCESSIO, ACCES_COM_8SM, acces_com_8x),
+
+
CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect),
CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect),
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index aa0e216d5ead..0d0c80905c58 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -1,8 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/serial_reg.h>
#include <linux/serial_8250.h>
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index 0809ae2aa9b1..673cda3d011d 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -55,7 +55,7 @@ static int __init serial_init_chip(struct parisc_device *dev)
uart.port.uartclk = (dev->id.sversion != 0xad) ?
7272727 : 1843200;
uart.port.mapbase = address;
- uart.port.membase = ioremap_nocache(address, 16);
+ uart.port.membase = ioremap(address, 16);
if (!uart.port.membase) {
dev_warn(&dev->dev, "Failed to map memory\n");
return -ENOMEM;
diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c
new file mode 100644
index 000000000000..d5a39e105a76
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_ioc3.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 8250 UART driver
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
+ * Copyright (C) 2014 Joshua Kinard <kumba@gentoo.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+#define IOC3_UARTCLK (22000000 / 3)
+
+struct ioc3_8250_data {
+ int line;
+};
+
+static unsigned int ioc3_serial_in(struct uart_port *p, int offset)
+{
+ return readb(p->membase + (offset ^ 3));
+}
+
+static void ioc3_serial_out(struct uart_port *p, int offset, int value)
+{
+ writeb(value, p->membase + (offset ^ 3));
+}
+
+static int serial8250_ioc3_probe(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data;
+ struct uart_8250_port up;
+ struct resource *r;
+ void __iomem *membase;
+ int irq, line;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ membase = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (!membase)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ irq = 0; /* no interrupt -> use polling */
+
+ /* Register serial ports with 8250.c */
+ memset(&up, 0, sizeof(struct uart_8250_port));
+ up.port.iotype = UPIO_MEM;
+ up.port.uartclk = IOC3_UARTCLK;
+ up.port.type = PORT_16550A;
+ up.port.irq = irq;
+ up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ);
+ up.port.dev = &pdev->dev;
+ up.port.membase = membase;
+ up.port.mapbase = r->start;
+ up.port.serial_in = ioc3_serial_in;
+ up.port.serial_out = ioc3_serial_out;
+ line = serial8250_register_8250_port(&up);
+ if (line < 0)
+ return line;
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+}
+
+static int serial8250_ioc3_remove(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ return 0;
+}
+
+static struct platform_driver serial8250_ioc3_driver = {
+ .probe = serial8250_ioc3_probe,
+ .remove = serial8250_ioc3_remove,
+ .driver = {
+ .name = "ioc3-serial8250",
+ }
+};
+
+module_platform_driver(serial8250_ioc3_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 8250 UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 92fbf46ce3bd..f6687756ec5e 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -202,7 +202,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->type = type;
port->uartclk = clk;
- port->irqflags |= IRQF_SHARED;
if (of_property_read_bool(np, "no-loopback-test"))
port->flags |= UPF_SKIP_TEST;
@@ -222,8 +221,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) &&
(of_device_is_compatible(np, "fsl,ns16550") ||
- of_device_is_compatible(np, "fsl,16550-FIFO64")))
+ of_device_is_compatible(np, "fsl,16550-FIFO64"))) {
port->handle_irq = fsl8250_handle_irq;
+ port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+ }
return 0;
err_unprepare:
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 836e736ae188..6f343ca08440 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -8,10 +8,6 @@
*
*/
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/io.h>
@@ -1147,7 +1143,7 @@ static int omap8250_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- membase = devm_ioremap_nocache(&pdev->dev, regs->start,
+ membase = devm_ioremap(&pdev->dev, regs->start,
resource_size(regs));
if (!membase)
return -ENODEV;
@@ -1192,6 +1188,7 @@ static int omap8250_probe(struct platform_device *pdev)
up.port.throttle = omap_8250_throttle;
up.port.unthrottle = omap_8250_unthrottle;
up.port.rs485_config = omap_8250_rs485_config;
+ up.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
ret = of_alias_get_id(np, "serial");
if (ret < 0) {
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 022924d5ad54..939685fed396 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -275,7 +275,7 @@ static int pci_plx9050_init(struct pci_dev *dev)
/*
* enable/disable interrupts
*/
- p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
writel(irq_config, p + 0x4c);
@@ -299,7 +299,7 @@ static void pci_plx9050_exit(struct pci_dev *dev)
/*
* disable interrupts
*/
- p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
if (p != NULL) {
writel(0, p + 0x4c);
@@ -475,7 +475,7 @@ static int pci_siig10x_init(struct pci_dev *dev)
break;
}
- p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 90655910b0c7..0325f2e53b74 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -11,10 +11,6 @@
* membase is an 'ioremapped' cookie.
*/
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ioport.h>
@@ -1001,6 +997,9 @@ static void autoconfig_16550a(struct uart_8250_port *up)
up->port.type = PORT_16550A;
up->capabilities |= UART_CAP_FIFO;
+ if (!IS_ENABLED(CONFIG_SERIAL_8250_16550A_VARIANTS))
+ return;
+
/*
* Check for presence of the EFR when DLAB is set.
* Only ST16C650V1 UARTs pass this test.
@@ -2178,6 +2177,10 @@ int serial8250_do_startup(struct uart_port *port)
}
}
+ /* Check if we need to have shared IRQs */
+ if (port->irq && (up->port.flags & UPF_SHARE_IRQ))
+ up->port.irqflags |= IRQF_SHARED;
+
if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
unsigned char iir1;
/*
@@ -2766,7 +2769,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
}
if (port->flags & UPF_IOREMAP) {
- port->membase = ioremap_nocache(port->mapbase, size);
+ port->membase = ioremap(port->mapbase, size);
if (!port->membase) {
release_mem_region(port->mapbase, size);
ret = -ENOMEM;
@@ -3055,6 +3058,7 @@ void serial8250_init_port(struct uart_8250_port *up)
spin_lock_init(&port->lock);
port->ops = &serial8250_pops;
+ port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
up->cur_iotype = 0xFF;
}
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index fab3d4f20667..f16824bbb573 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -60,6 +60,16 @@ config SERIAL_8250_PNP
This builds standard PNP serial support. You may be able to
disable this feature if you only need legacy serial support.
+config SERIAL_8250_16550A_VARIANTS
+ bool "Support for variants of the 16550A serial port"
+ depends on SERIAL_8250
+ help
+ The 8250 driver can probe for many variants of the venerable 16550A
+ serial port. Doing so takes additional time at boot.
+
+ On modern systems, especially those using serial only for a simple
+ console, you can say N here.
+
config SERIAL_8250_FINTEK
bool "Support for Fintek F81216A LPC to 4 UART RS485 API"
depends on SERIAL_8250
@@ -371,6 +381,17 @@ config SERIAL_8250_EM
port hardware found on the Emma Mobile line of processors.
If unsure, say N.
+config SERIAL_8250_IOC3
+ tristate "SGI IOC3 8250 UART support"
+ depends on SGI_MFD_IOC3 && SERIAL_8250
+ select SERIAL_8250_EXTENDED
+ select SERIAL_8250_SHARE_IRQ
+ help
+ Enable this if you have a SGI Origin or Octane machine. This module
+ provides basic serial support by directly driving the UART chip
+ behind the IOC3 device on those systems. Maximum baud speed is
+ 38400bps using this driver.
+
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 08c1d8117506..51a6079d3f1f 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
+obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.