diff options
Diffstat (limited to 'drivers/tty/serial/lantiq.c')
| -rw-r--r-- | drivers/tty/serial/lantiq.c | 83 |
1 files changed, 51 insertions, 32 deletions
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 96c1cacc7360..02da071fe1e7 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -31,16 +31,19 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/serial.h> -#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <lantiq_soc.h> #define PORT_LTQ_ASC 111 #define MAXPORTS 2 #define UART_DUMMY_UER_RX 1 -#define DRVNAME "ltq_asc" +#define DRVNAME "lantiq,asc" #ifdef __BIG_ENDIAN #define LTQ_ASC_TBUF (0x0020 + 3) #define LTQ_ASC_RBUF (0x0024 + 3) @@ -114,6 +117,9 @@ static DEFINE_SPINLOCK(ltq_asc_lock); struct ltq_uart_port { struct uart_port port; + /* clock used to derive divider */ + struct clk *fpiclk; + /* clock gating of the ASC core */ struct clk *clk; unsigned int tx_irq; unsigned int rx_irq; @@ -316,7 +322,9 @@ lqasc_startup(struct uart_port *port) struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); int retval; - port->uartclk = clk_get_rate(ltq_port->clk); + if (ltq_port->clk) + clk_enable(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), port->membase + LTQ_ASC_CLC); @@ -382,6 +390,8 @@ lqasc_shutdown(struct uart_port *port) port->membase + LTQ_ASC_RXFCON); ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); + if (ltq_port->clk) + clk_disable(ltq_port->clk); } static void @@ -630,7 +640,7 @@ lqasc_console_setup(struct console *co, char *options) port = <q_port->port; - port->uartclk = clk_get_rate(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -668,37 +678,32 @@ static struct uart_driver lqasc_reg = { static int __init lqasc_probe(struct platform_device *pdev) { + struct device_node *node = pdev->dev.of_node; struct ltq_uart_port *ltq_port; struct uart_port *port; - struct resource *mmres, *irqres; - int tx_irq, rx_irq, err_irq; - struct clk *clk; + struct resource *mmres, irqres[3]; + int line = 0; int ret; mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) + ret = of_irq_to_resource_table(node, irqres, 3); + if (!mmres || (ret != 3)) { + dev_err(&pdev->dev, + "failed to get memory/irq for serial port\n"); return -ENODEV; + } - if (pdev->id >= MAXPORTS) - return -EBUSY; + /* check if this is the console port */ + if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC)) + line = 1; - if (lqasc_port[pdev->id] != NULL) + if (lqasc_port[line]) { + dev_err(&pdev->dev, "port %d already allocated\n", line); return -EBUSY; - - clk = clk_get(&pdev->dev, "fpi"); - if (IS_ERR(clk)) { - pr_err("failed to get fpi clk\n"); - return -ENOENT; } - tx_irq = platform_get_irq_byname(pdev, "tx"); - rx_irq = platform_get_irq_byname(pdev, "rx"); - err_irq = platform_get_irq_byname(pdev, "err"); - if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0)) - return -ENODEV; - - ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL); + ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), + GFP_KERNEL); if (!ltq_port) return -ENOMEM; @@ -709,19 +714,26 @@ lqasc_probe(struct platform_device *pdev) port->ops = &lqasc_pops; port->fifosize = 16; port->type = PORT_LTQ_ASC, - port->line = pdev->id; + port->line = line; port->dev = &pdev->dev; - - port->irq = tx_irq; /* unused, just to be backward-compatibe */ + /* unused, just to be backward-compatible */ + port->irq = irqres[0].start; port->mapbase = mmres->start; - ltq_port->clk = clk; + ltq_port->fpiclk = clk_get_fpi(); + if (IS_ERR(ltq_port->fpiclk)) { + pr_err("failed to get fpi clk\n"); + return -ENOENT; + } - ltq_port->tx_irq = tx_irq; - ltq_port->rx_irq = rx_irq; - ltq_port->err_irq = err_irq; + /* not all asc ports have clock gates, lets ignore the return code */ + ltq_port->clk = clk_get(&pdev->dev, NULL); - lqasc_port[pdev->id] = ltq_port; + ltq_port->tx_irq = irqres[0].start; + ltq_port->rx_irq = irqres[1].start; + ltq_port->err_irq = irqres[2].start; + + lqasc_port[line] = ltq_port; platform_set_drvdata(pdev, ltq_port); ret = uart_add_one_port(&lqasc_reg, port); @@ -729,10 +741,17 @@ lqasc_probe(struct platform_device *pdev) return ret; } +static const struct of_device_id ltq_asc_match[] = { + { .compatible = DRVNAME }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_asc_match); + static struct platform_driver lqasc_driver = { .driver = { .name = DRVNAME, .owner = THIS_MODULE, + .of_match_table = ltq_asc_match, }, }; |