diff options
Diffstat (limited to 'drivers/tty/serial/mcf.c')
| -rw-r--r-- | drivers/tty/serial/mcf.c | 22 |
1 files changed, 13 insertions, 9 deletions
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 7dbfb4cde124..b1cd9a76dd93 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -192,7 +192,7 @@ static void mcf_shutdown(struct uart_port *port) /****************************************************************************/ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { unsigned long flags; unsigned int baud, baudclk; @@ -319,9 +319,7 @@ static void mcf_rx_chars(struct mcf_uart *pp) uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); } - spin_unlock(&port->lock); tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); } /****************************************************************************/ @@ -340,7 +338,7 @@ static void mcf_tx_chars(struct mcf_uart *pp) } while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { - if (xmit->head == xmit->tail) + if (uart_circ_empty(xmit)) break; writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); @@ -350,9 +348,8 @@ static void mcf_tx_chars(struct mcf_uart *pp) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (xmit->head == xmit->tail) { - pp->imr &= ~MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); + if (uart_circ_empty(xmit)) { + mcf_stop_tx(port); /* Disable TX to negate RTS automatically */ if (port->rs485.flags & SER_RS485_ENABLED) writeb(MCFUART_UCR_TXDISABLE, @@ -434,7 +431,8 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /****************************************************************************/ /* Enable or disable the RS485 support */ -static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) +static int mcf_config_rs485(struct uart_port *port, struct ktermios *termios, + struct serial_rs485 *rs485) { unsigned char mr1, mr2; @@ -451,11 +449,14 @@ static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) } writeb(mr1, port->membase + MCFUART_UMR); writeb(mr2, port->membase + MCFUART_UMR); - port->rs485 = *rs485; return 0; } +static const struct serial_rs485 mcf_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, +}; + /****************************************************************************/ /* @@ -505,6 +506,7 @@ int __init early_mcf_setup(struct mcf_platform_uart *platp) port->uartclk = MCF_BUSCLK; port->flags = UPF_BOOT_AUTOCONF; port->rs485_config = mcf_config_rs485; + port->rs485_supported = mcf_rs485_supported; port->ops = &mcf_uart_ops; } @@ -632,6 +634,8 @@ static int mcf_probe(struct platform_device *pdev) port->ops = &mcf_uart_ops; port->flags = UPF_BOOT_AUTOCONF; port->rs485_config = mcf_config_rs485; + port->rs485_supported = mcf_rs485_supported; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MCF_CONSOLE); uart_add_one_port(&mcf_driver, port); } |