diff options
Diffstat (limited to 'drivers/tty/serial/men_z135_uart.c')
| -rw-r--r-- | drivers/tty/serial/men_z135_uart.c | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 4f53a4caabf6..3690f5cf0f43 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -173,7 +173,7 @@ static void men_z135_reg_clr(struct men_z135_port *uart, /** * men_z135_handle_modem_status() - Handle change of modem status - * @port: The UART port + * @uart: The UART port * * Handle change of modem status register. This is done by reading the "delta" * versions of DCD (Data Carrier Detect) and CTS (Clear To Send). @@ -236,7 +236,7 @@ static u16 get_rx_fifo_content(struct men_z135_port *uart) /** * men_z135_handle_rx() - RX tasklet routine - * @arg: Pointer to struct men_z135_port + * @uart: Pointer to struct men_z135_port * * Copy from RX FIFO and acknowledge number of bytes copied. */ @@ -287,7 +287,7 @@ static void men_z135_handle_rx(struct men_z135_port *uart) /** * men_z135_handle_tx() - TX tasklet routine - * @arg: Pointer to struct men_z135_port + * @uart: Pointer to struct men_z135_port * */ static void men_z135_handle_tx(struct men_z135_port *uart) @@ -596,7 +596,7 @@ static void men_z135_stop_rx(struct uart_port *port) /** * men_z135_enable_ms() - Enable Modem Status - * port: + * @port: the port * * Enable Modem Status IRQ. */ @@ -646,8 +646,8 @@ static void men_z135_shutdown(struct uart_port *port) } static void men_z135_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) + struct ktermios *termios, + const struct ktermios *old) { struct men_z135_port *uart = to_men_z135(port); unsigned int baud; @@ -833,7 +833,6 @@ static int men_z135_probe(struct mcb_device *mdev, uart->port.iotype = UPIO_MEM; uart->port.ops = &men_z135_ops; uart->port.irq = mcb_get_irq(mdev); - uart->port.iotype = UPIO_MEM; uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; uart->port.line = line++; uart->port.dev = dev; |