diff options
Diffstat (limited to 'drivers/tty/serial/pxa.c')
| -rw-r--r-- | drivers/tty/serial/pxa.c | 37 |
1 files changed, 13 insertions, 24 deletions
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 41319ef96fa6..2d25231fad84 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/circ_buf.h> #include <linux/delay.h> @@ -422,7 +423,7 @@ static void serial_pxa_shutdown(struct uart_port *port) static void serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) + const struct ktermios *old) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned char cval, fcr = 0; @@ -430,21 +431,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, unsigned int baud, quot; unsigned int dll; - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } + cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag)); if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; @@ -589,8 +576,6 @@ static struct uart_driver serial_pxa_reg; #ifdef CONFIG_SERIAL_PXA_CONSOLE -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - /* * Wait for transmitter & holding register to empty */ @@ -608,7 +593,7 @@ static void wait_for_xmitr(struct uart_pxa_port *up) if (--tmout == 0) break; udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + } while (!uart_lsr_tx_empty(status)); /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { @@ -619,7 +604,7 @@ static void wait_for_xmitr(struct uart_pxa_port *up) } } -static void serial_pxa_console_putchar(struct uart_port *port, int ch) +static void serial_pxa_console_putchar(struct uart_port *port, unsigned char ch) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; @@ -842,14 +827,18 @@ static int serial_pxa_probe_dt(struct platform_device *pdev, static int serial_pxa_probe(struct platform_device *dev) { struct uart_pxa_port *sport; - struct resource *mmres, *irqres; + struct resource *mmres; int ret; + int irq; mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) + if (!mmres) return -ENODEV; + irq = platform_get_irq(dev, 0); + if (irq < 0) + return irq; + sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); if (!sport) return -ENOMEM; @@ -869,7 +858,7 @@ static int serial_pxa_probe(struct platform_device *dev) sport->port.type = PORT_PXA; sport->port.iotype = UPIO_MEM; sport->port.mapbase = mmres->start; - sport->port.irq = irqres->start; + sport->port.irq = irq; sport->port.fifosize = 64; sport->port.ops = &serial_pxa_pops; sport->port.dev = &dev->dev; |