diff options
Diffstat (limited to 'drivers/tty/serial/serial_core.c')
| -rw-r--r-- | drivers/tty/serial/serial_core.c | 90 |
1 files changed, 10 insertions, 80 deletions
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 733fe8e73f0f..db7912cb7ae0 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1,6 +1,4 @@ /* - * linux/drivers/char/core.c - * * Driver core for serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. @@ -172,12 +170,16 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in retval = uport->ops->startup(uport); if (retval == 0) { - if (init_hw) { - /* - * Initialise the hardware port settings. - */ - uart_change_speed(tty, state, NULL); + if (uart_console(uport) && uport->cons->cflag) { + tty->termios->c_cflag = uport->cons->cflag; + uport->cons->cflag = 0; + } + /* + * Initialise the hardware port settings. + */ + uart_change_speed(tty, state, NULL); + if (init_hw) { /* * Setup the RTS and DTR signals once the * port is open and ready to respond. @@ -1240,17 +1242,6 @@ static void uart_set_termios(struct tty_struct *tty, } spin_unlock_irqrestore(&state->uart_port->lock, flags); } -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&state->uart_port.open_wait); -#endif } /* @@ -1423,7 +1414,6 @@ static void __uart_wait_until_sent(struct uart_port *port, int timeout) if (time_after(jiffies, expire)) break; } - set_current_state(TASK_RUNNING); /* might not be needed */ } static void uart_wait_until_sent(struct tty_struct *tty, int timeout) @@ -1466,45 +1456,6 @@ static void uart_hangup(struct tty_struct *tty) mutex_unlock(&port->mutex); } -/** - * uart_update_termios - update the terminal hw settings - * @tty: tty associated with UART - * @state: UART to update - * - * Copy across the serial console cflag setting into the termios settings - * for the initial open of the port. This allows continuity between the - * kernel settings, and the settings init adopts when it opens the port - * for the first time. - */ -static void uart_update_termios(struct tty_struct *tty, - struct uart_state *state) -{ - struct uart_port *port = state->uart_port; - - if (uart_console(port) && port->cons->cflag) { - tty->termios->c_cflag = port->cons->cflag; - port->cons->cflag = 0; - } - - /* - * If the device failed to grab its irq resources, - * or some other error occurred, don't try to talk - * to the port hardware. - */ - if (!(tty->flags & (1 << TTY_IO_ERROR))) { - /* - * Make termios settings take effect. - */ - uart_change_speed(tty, state, NULL); - - /* - * And finally enable the RTS and DTR signals. - */ - if (tty->termios->c_cflag & CBAUD) - uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } -} - static int uart_carrier_raised(struct tty_port *port) { struct uart_state *state = container_of(port, struct uart_state, port); @@ -1524,16 +1475,8 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport = state->uart_port; - if (onoff) { + if (onoff) uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - - /* - * If this is the first open to succeed, - * adjust things to suit. - */ - if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags)) - uart_update_termios(port->tty, state); - } else uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); } @@ -1586,15 +1529,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp) pr_debug("uart_open(%d) called\n", line); /* - * tty->driver->num won't change, so we won't fail here with - * tty->driver_data set to something non-NULL (and therefore - * we won't get caught by uart_close()). - */ - retval = -ENODEV; - if (line >= tty->driver->num) - goto fail; - - /* * We take the semaphore inside uart_get to guarantee that we won't * be re-entered while allocating the state structure, or while we * request any IRQs that the driver may need. This also has the nice @@ -1972,13 +1906,9 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) struct tty_port *port = &state->port; struct device *tty_dev; struct uart_match match = {uport, drv}; - struct tty_struct *tty; mutex_lock(&port->mutex); - /* Must be inside the mutex lock until we convert to tty_port */ - tty = port->tty; - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { if (!enable_irq_wake(uport->irq)) |