diff options
Diffstat (limited to 'drivers/tty/serial/st-asc.c')
| -rw-r--r-- | drivers/tty/serial/st-asc.c | 27 |
1 files changed, 23 insertions, 4 deletions
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 69e62326723d..397df507579e 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -30,6 +30,7 @@ #include <linux/of_platform.h> #include <linux/serial_core.h> #include <linux/clk.h> +#include <linux/gpio/consumer.h> #define DRIVER_NAME "st-asc" #define ASC_SERIAL_NAME "ttyAS" @@ -38,6 +39,7 @@ struct asc_port { struct uart_port port; + struct gpio_desc *rts; struct clk *clk; unsigned int hw_flow_control:1; unsigned int force_m1:1; @@ -391,12 +393,27 @@ static unsigned int asc_tx_empty(struct uart_port *port) static void asc_set_mctrl(struct uart_port *port, unsigned int mctrl) { + struct asc_port *ascport = to_asc_port(port); + /* - * This routine is used for seting signals of: DTR, DCD, CTS/RTS - * We use ASC's hardware for CTS/RTS, so don't need any for that. - * Some boards have DTR and DCD implemented using PIO pins, - * code to do this should be hooked in here. + * This routine is used for seting signals of: DTR, DCD, CTS and RTS. + * We use ASC's hardware for CTS/RTS when hardware flow-control is + * enabled, however if the RTS line is required for another purpose, + * commonly controlled using HUP from userspace, then we need to toggle + * it manually, using GPIO. + * + * Some boards also have DTR and DCD implemented using PIO pins, code to + * do this should be hooked in here. */ + + if (!ascport->rts) + return; + + /* If HW flow-control is enabled, we can't fiddle with the RTS line */ + if (asc_in(port, ASC_CTL) & ASC_CTL_CTSENABLE) + return; + + gpiod_set_value(ascport->rts, mctrl & TIOCM_RTS); } static unsigned int asc_get_mctrl(struct uart_port *port) @@ -726,6 +743,8 @@ static struct asc_port *asc_of_get_asc_port(struct platform_device *pdev) "st,hw-flow-control"); asc_ports[id].force_m1 = of_property_read_bool(np, "st,force_m1"); asc_ports[id].port.line = id; + asc_ports[id].rts = NULL; + return &asc_ports[id]; } |