18 files changed, 373 insertions, 122 deletions

diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 74a408d9db24..023db3266757 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -10,6 +10,8 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
 #include <linux/clk.h>
 
 #include "8250.h"
@@ -28,9 +30,18 @@ struct aspeed_vuart {
 	void __iomem		*regs;
 	struct clk		*clk;
 	int			line;
+	struct timer_list	unthrottle_timer;
+	struct uart_8250_port	*port;
 };
 
 /*
+ * If we fill the tty flip buffers, we throttle the data ready interrupt
+ * to prevent dropped characters. This timeout defines how long we wait
+ * to (conditionally, depending on buffer state) unthrottle.
+ */
+static const int unthrottle_timeout = HZ/10;
+
+/*
  * The VUART is basically two UART 'front ends' connected by their FIFO
  * (no actual serial line in between). One is on the BMC side (management
  * controller) and one is on the host CPU side.
@@ -179,6 +190,113 @@ static void aspeed_vuart_shutdown(struct uart_port *uart_port)
 	serial8250_do_shutdown(uart_port);
 }
 
+static void __aspeed_vuart_set_throttle(struct uart_8250_port *up,
+		bool throttle)
+{
+	unsigned char irqs = UART_IER_RLSI | UART_IER_RDI;
+
+	up->ier &= ~irqs;
+	if (!throttle)
+		up->ier |= irqs;
+	serial_out(up, UART_IER, up->ier);
+}
+static void aspeed_vuart_set_throttle(struct uart_port *port, bool throttle)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__aspeed_vuart_set_throttle(up, throttle);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void aspeed_vuart_throttle(struct uart_port *port)
+{
+	aspeed_vuart_set_throttle(port, true);
+}
+
+static void aspeed_vuart_unthrottle(struct uart_port *port)
+{
+	aspeed_vuart_set_throttle(port, false);
+}
+
+static void aspeed_vuart_unthrottle_exp(struct timer_list *timer)
+{
+	struct aspeed_vuart *vuart = from_timer(vuart, timer, unthrottle_timer);
+	struct uart_8250_port *up = vuart->port;
+
+	if (!tty_buffer_space_avail(&up->port.state->port)) {
+		mod_timer(&vuart->unthrottle_timer, unthrottle_timeout);
+		return;
+	}
+
+	aspeed_vuart_unthrottle(&up->port);
+}
+
+/*
+ * Custom interrupt handler to manage finer-grained flow control. Although we
+ * have throttle/unthrottle callbacks, we've seen that the VUART device can
+ * deliver characters faster than the ldisc has a chance to check buffer space
+ * against the throttle threshold. This results in dropped characters before
+ * the throttle.
+ *
+ * We do this by checking for flip buffer space before RX. If we have no space,
+ * throttle now and schedule an unthrottle for later, once the ldisc has had
+ * a chance to drain the buffers.
+ */
+static int aspeed_vuart_handle_irq(struct uart_port *port)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+	unsigned int iir, lsr;
+	unsigned long flags;
+	int space, count;
+
+	iir = serial_port_in(port, UART_IIR);
+
+	if (iir & UART_IIR_NO_INT)
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	lsr = serial_port_in(port, UART_LSR);
+
+	if (lsr & (UART_LSR_DR | UART_LSR_BI)) {
+		space = tty_buffer_space_avail(&port->state->port);
+
+		if (!space) {
+			/* throttle and schedule an unthrottle later */
+			struct aspeed_vuart *vuart = port->private_data;
+			__aspeed_vuart_set_throttle(up, true);
+
+			if (!timer_pending(&vuart->unthrottle_timer)) {
+				vuart->port = up;
+				mod_timer(&vuart->unthrottle_timer,
+						unthrottle_timeout);
+			}
+
+		} else {
+			count = min(space, 256);
+
+			do {
+				serial8250_read_char(up, lsr);
+				lsr = serial_in(up, UART_LSR);
+				if (--count == 0)
+					break;
+			} while (lsr & (UART_LSR_DR | UART_LSR_BI));
+
+			tty_flip_buffer_push(&port->state->port);
+		}
+	}
+
+	serial8250_modem_status(up);
+	if (lsr & UART_LSR_THRE)
+		serial8250_tx_chars(up);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 1;
+}
+
 static int aspeed_vuart_probe(struct platform_device *pdev)
 {
 	struct uart_8250_port port;
@@ -195,6 +313,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	vuart->dev = &pdev->dev;
+	timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	vuart->regs = devm_ioremap_resource(&pdev->dev, res);
@@ -208,6 +327,9 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 	port.port.mapsize = resource_size(res);
 	port.port.startup = aspeed_vuart_startup;
 	port.port.shutdown = aspeed_vuart_shutdown;
+	port.port.throttle = aspeed_vuart_throttle;
+	port.port.unthrottle = aspeed_vuart_unthrottle;
+	port.port.status = UPSTAT_SYNC_FIFO;
 	port.port.dev = &pdev->dev;
 
 	rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
@@ -253,6 +375,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 
 	port.port.irq = irq_of_parse_and_map(np, 0);
 	port.port.irqflags = IRQF_SHARED;
+	port.port.handle_irq = aspeed_vuart_handle_irq;
 	port.port.iotype = UPIO_MEM;
 	port.port.type = PORT_16550A;
 	port.port.uartclk = clk;
@@ -292,6 +415,7 @@ static int aspeed_vuart_remove(struct platform_device *pdev)
 {
 	struct aspeed_vuart *vuart = platform_get_drvdata(pdev);
 
+	del_timer_sync(&vuart->unthrottle_timer);
 	aspeed_vuart_set_enabled(vuart, false);
 	serial8250_unregister_port(vuart->line);
 	sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 6fcdb90f616a..0529b5cc094b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -121,25 +121,44 @@ static void dw8250_check_lcr(struct uart_port *p, int value)
 }
 
 /* Returns once the transmitter is empty or we run out of retries */
-static void dw8250_tx_wait_empty(struct uart_port *p, int tries)
+static void dw8250_tx_wait_empty(struct uart_port *p)
 {
+	unsigned int tries = 20000;
+	unsigned int delay_threshold = tries - 1000;
 	unsigned int lsr;
 
 	while (tries--) {
 		lsr = readb (p->membase + (UART_LSR << p->regshift));
 		if (lsr & UART_LSR_TEMT)
 			break;
-		udelay (10);
+
+		/* The device is first given a chance to empty without delay,
+		 * to avoid slowdowns at high bitrates. If after 1000 tries
+		 * the buffer has still not emptied, allow more time for low-
+		 * speed links. */
+		if (tries < delay_threshold)
+			udelay (1);
 	}
 }
 
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
 
 	/* Allow the TX to drain before we reconfigure */
 	if (offset == UART_LCR)
-		dw8250_tx_wait_empty(p, 1000);
+		dw8250_tx_wait_empty(p);
+
+	writeb(value, p->membase + (offset << p->regshift));
+
+	if (offset == UART_LCR && !d->uart_16550_compatible)
+		dw8250_check_lcr(p, value);
+}
+
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+	struct dw8250_data *d = p->private_data;
 
 	writeb(value, p->membase + (offset << p->regshift));
 
@@ -357,6 +376,9 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 			p->serial_in = dw8250_serial_in32be;
 			p->serial_out = dw8250_serial_out32be;
 		}
+		if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
+			p->serial_out = dw8250_serial_out38x;
+
 	} else if (acpi_dev_present("APMC0D08", NULL, -1)) {
 		p->iotype = UPIO_MEM32;
 		p->regshift = 2;
@@ -666,6 +688,7 @@ static const struct dev_pm_ops dw8250_pm_ops = {
 static const struct of_device_id dw8250_of_match[] = {
 	{ .compatible = "snps,dw-apb-uart" },
 	{ .compatible = "cavium,octeon-3860-uart" },
+	{ .compatible = "marvell,armada-38x-uart" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index ae6a256524d8..5cd8c36c8fcc 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -122,7 +122,7 @@ static void __init init_port(struct earlycon_device *device)
 	serial8250_early_out(port, UART_FCR, 0);	/* no fifo */
 	serial8250_early_out(port, UART_MCR, 0x3);	/* DTR + RTS */
 
-	if (port->uartclk && device->baud) {
+	if (port->uartclk) {
 		divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
 		c = serial8250_early_in(port, UART_LCR);
 		serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 9835b1c1cbe1..3de8d6a41246 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -149,6 +149,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	port->uartclk = clk;
 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
 		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
+	port->irqflags |= IRQF_SHARED;
 
 	if (of_property_read_bool(np, "no-loopback-test"))
 		port->flags |= UPF_SKIP_TEST;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 624b501fd253..6aaa84355fd1 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1310,8 +1310,17 @@ static void omap8250_complete(struct device *dev)
 static int omap8250_suspend(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
+	struct uart_8250_port *up = serial8250_get_port(priv->line);
 
 	serial8250_suspend_port(priv->line);
+
+	pm_runtime_get_sync(dev);
+	if (!device_may_wakeup(dev))
+		priv->wer = 0;
+	serial_out(up, UART_OMAP_WER, priv->wer);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
 	flush_work(&priv->qos_work);
 	return 0;
 }
@@ -1403,6 +1412,8 @@ static int omap8250_runtime_suspend(struct device *dev)
 
 		/* Restore to UART mode after reset (for wakeup) */
 		omap8250_update_mdr1(up, priv);
+		/* Restore wakeup enable register */
+		serial_out(up, UART_OMAP_WER, priv->wer);
 	}
 
 	if (up->dma && up->dma->rxchan)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 95833cbc4338..8fbd5fbeb318 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1680,7 +1680,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 	serial8250_rpm_put(up);
 }
 
-static void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
+void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
 {
 	struct uart_port *port = &up->port;
 	unsigned char ch;
@@ -1740,6 +1740,7 @@ static void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
 
 	uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
 }
+EXPORT_SYMBOL_GPL(serial8250_read_char);
 
 /*
  * serial8250_rx_chars: processes according to the passed in LSR
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0f058df0b070..eca55187539a 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -115,7 +115,6 @@ config SERIAL_SB1250_DUART_CONSOLE
 
 config SERIAL_ATMEL
 	bool "AT91 on-chip serial port support"
-	depends on HAS_DMA
 	depends on ARCH_AT91 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -500,7 +499,6 @@ config SERIAL_SA1100_CONSOLE
 
 config SERIAL_IMX
 	tristate "IMX serial port support"
-	depends on HAS_DMA
 	depends on ARCH_MXC || COMPILE_TEST
 	select SERIAL_CORE
 	select RATIONAL
@@ -676,6 +674,8 @@ config SERIAL_SH_SCI
 
 config SERIAL_SH_SCI_NR_UARTS
 	int "Maximum number of SCI(F) serial ports" if EXPERT
+	range 1 64 if 64BIT
+	range 1 32 if !64BIT
 	depends on SERIAL_SH_SCI
 	default "3" if H8300
 	default "10" if SUPERH
@@ -1262,7 +1262,6 @@ config SERIAL_PCH_UART_CONSOLE
 
 config SERIAL_MXS_AUART
 	tristate "MXS AUART support"
-	depends on HAS_DMA
 	depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -1473,7 +1472,6 @@ config SERIAL_SPRD_CONSOLE
 config SERIAL_STM32
 	tristate "STMicroelectronics STM32 serial port support"
 	select SERIAL_CORE
-	depends on HAS_DMA
 	depends on ARCH_STM32 || COMPILE_TEST
 	help
 	  This driver is for the on-chip Serial Controller on
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 22683393a0f2..149d0d0da65e 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -281,6 +281,10 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
 	if (val)
 		early_console_dev.baud = be32_to_cpu(*val);
 
+	val = of_get_flat_dt_prop(node, "clock-frequency", NULL);
+	if (val)
+		port->uartclk = be32_to_cpu(*val);
+
 	if (options) {
 		early_console_dev.baud = simple_strtoul(options, NULL, 0);
 		strlcpy(early_console_dev.options, options,
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index c2fc6bef7a6f..dd573d8ce087 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2425,8 +2425,7 @@ static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
 
 static int imx_uart_suspend_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	imx_uart_save_context(sport);
 
@@ -2437,8 +2436,7 @@ static int imx_uart_suspend_noirq(struct device *dev)
 
 static int imx_uart_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 	int ret;
 
 	ret = clk_enable(sport->clk_ipg);
@@ -2452,8 +2450,7 @@ static int imx_uart_resume_noirq(struct device *dev)
 
 static int imx_uart_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 	int ret;
 
 	uart_suspend_port(&imx_uart_uart_driver, &sport->port);
@@ -2471,8 +2468,7 @@ static int imx_uart_suspend(struct device *dev)
 
 static int imx_uart_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	/* disable wakeup from i.MX UART */
 	imx_uart_enable_wakeup(sport, false);
@@ -2487,8 +2483,7 @@ static int imx_uart_resume(struct device *dev)
 
 static int imx_uart_freeze(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	uart_suspend_port(&imx_uart_uart_driver, &sport->port);
 
@@ -2497,8 +2492,7 @@ static int imx_uart_freeze(struct device *dev)
 
 static int imx_uart_thaw(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	uart_resume_port(&imx_uart_uart_driver, &sport->port);
 
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index ee96cf0d0057..33cd6e59ea69 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1812,11 +1812,36 @@ static const struct of_device_id msm_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, msm_match_table);
 
+#ifdef CONFIG_PM_SLEEP
+static int msm_serial_suspend(struct device *dev)
+{
+	struct msm_port *port = dev_get_drvdata(dev);
+
+	uart_suspend_port(&msm_uart_driver, &port->uart);
+
+	return 0;
+}
+
+static int msm_serial_resume(struct device *dev)
+{
+	struct msm_port *port = dev_get_drvdata(dev);
+
+	uart_resume_port(&msm_uart_driver, &port->uart);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops msm_serial_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume)
+};
+
 static struct platform_driver msm_platform_driver = {
 	.remove = msm_serial_remove,
 	.probe = msm_serial_probe,
 	.driver = {
 		.name = "msm_serial",
+		.pm = &msm_serial_dev_pm_ops,
 		.of_match_table = msm_match_table,
 	},
 };
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index f503fab1e268..d04b5eeea3c6 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -71,6 +71,8 @@
 #define UART_BRDV		0x10
 #define  BRDV_BAUD_MASK         0x3FF
 
+#define UART_OSAMP		0x14
+
 #define MVEBU_NR_UARTS		2
 
 #define MVEBU_UART_TYPE		"mvebu-uart"
@@ -108,6 +110,17 @@ struct mvebu_uart_driver_data {
 	struct uart_flags flags;
 };
 
+/* Saved registers during suspend */
+struct mvebu_uart_pm_regs {
+	unsigned int rbr;
+	unsigned int tsh;
+	unsigned int ctrl;
+	unsigned int intr;
+	unsigned int stat;
+	unsigned int brdv;
+	unsigned int osamp;
+};
+
 /* MVEBU UART driver structure */
 struct mvebu_uart {
 	struct uart_port *port;
@@ -115,6 +128,9 @@ struct mvebu_uart {
 	int irq[UART_IRQ_COUNT];
 	unsigned char __iomem *nb;
 	struct mvebu_uart_driver_data *data;
+#if defined(CONFIG_PM)
+	struct mvebu_uart_pm_regs pm_regs;
+#endif /* CONFIG_PM */
 };
 
 static struct mvebu_uart *to_mvuart(struct uart_port *port)
@@ -718,6 +734,51 @@ static struct uart_driver mvebu_uart_driver = {
 #endif
 };
 
+#if defined(CONFIG_PM)
+static int mvebu_uart_suspend(struct device *dev)
+{
+	struct mvebu_uart *mvuart = dev_get_drvdata(dev);
+	struct uart_port *port = mvuart->port;
+
+	uart_suspend_port(&mvebu_uart_driver, port);
+
+	mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port));
+	mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port));
+	mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port));
+	mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port));
+	mvuart->pm_regs.stat = readl(port->membase + UART_STAT);
+	mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV);
+	mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP);
+
+	device_set_wakeup_enable(dev, true);
+
+	return 0;
+}
+
+static int mvebu_uart_resume(struct device *dev)
+{
+	struct mvebu_uart *mvuart = dev_get_drvdata(dev);
+	struct uart_port *port = mvuart->port;
+
+	writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port));
+	writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port));
+	writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port));
+	writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port));
+	writel(mvuart->pm_regs.stat, port->membase + UART_STAT);
+	writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV);
+	writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP);
+
+	uart_resume_port(&mvebu_uart_driver, port);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mvebu_uart_pm_ops = {
+	.suspend        = mvebu_uart_suspend,
+	.resume         = mvebu_uart_resume,
+};
+#endif /* CONFIG_PM */
+
 static const struct of_device_id mvebu_uart_of_match[];
 
 /* Counter to keep track of each UART port id when not using CONFIG_OF */
@@ -891,6 +952,9 @@ static struct platform_driver mvebu_uart_platform_driver = {
 		.name  = "mvebu-uart",
 		.of_match_table = of_match_ptr(mvebu_uart_of_match),
 		.suppress_bind_attrs = true,
+#if defined(CONFIG_PM)
+		.pm	= &mvebu_uart_pm_ops,
+#endif /* CONFIG_PM */
 	},
 };
 
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index a1b3eb04cb32..c3eb87c028a6 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1087,8 +1087,7 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
 
 static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
 	uart_suspend_port(uport->private_data, uport);
@@ -1097,8 +1096,7 @@ static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
 
 static int __maybe_unused qcom_geni_serial_sys_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
 	if (console_suspend_enabled && uport->suspended) {
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 65792a3539d0..243c96025053 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1168,7 +1168,10 @@ static int sc16is7xx_probe(struct device *dev,
 		else
 			return PTR_ERR(s->clk);
 	} else {
-		clk_prepare_enable(s->clk);
+		ret = clk_prepare_enable(s->clk);
+		if (ret)
+			return ret;
+
 		freq = clk_get_rate(s->clk);
 	}
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0466f9f08a91..c47158c93202 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -674,8 +674,8 @@ static void uart_send_xchar(struct tty_struct *tty, char ch)
 static void uart_throttle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
+	upstat_t mask = UPSTAT_SYNC_FIFO;
 	struct uart_port *port;
-	upstat_t mask = 0;
 
 	port = uart_port_ref(state);
 	if (!port)
@@ -703,8 +703,8 @@ static void uart_throttle(struct tty_struct *tty)
 static void uart_unthrottle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
+	upstat_t mask = UPSTAT_SYNC_FIFO;
 	struct uart_port *port;
-	upstat_t mask = 0;
 
 	port = uart_port_ref(state);
 	if (!port)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index fdbbff547106..cc0504f30a1d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -160,6 +160,7 @@ struct sci_port {
 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
 
 static struct sci_port sci_ports[SCI_NPORTS];
+static unsigned long sci_ports_in_use;
 static struct uart_driver sci_uart_driver;
 
 static inline struct sci_port *
@@ -2390,6 +2391,27 @@ done:
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
+	/* byte size and parity */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		bits = 7;
+		break;
+	case CS6:
+		bits = 8;
+		break;
+	case CS7:
+		bits = 9;
+		break;
+	default:
+		bits = 10;
+		break;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		bits++;
+	if (termios->c_cflag & PARENB)
+		bits++;
+
 	if (best_clk >= 0) {
 		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 			switch (srr + 1) {
@@ -2406,8 +2428,27 @@ done:
 		serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
 		serial_port_out(port, SCSMR, smr_val);
 		serial_port_out(port, SCBRR, brr);
-		if (sci_getreg(port, HSSRR)->size)
-			serial_port_out(port, HSSRR, srr | HSCIF_SRE);
+		if (sci_getreg(port, HSSRR)->size) {
+			unsigned int hssrr = srr | HSCIF_SRE;
+			/* Calculate deviation from intended rate at the
+			 * center of the last stop bit in sampling clocks.
+			 */
+			int last_stop = bits * 2 - 1;
+			int deviation = min_err * srr * last_stop / 2 / baud;
+
+			if (abs(deviation) >= 2) {
+				/* At least two sampling clocks off at the
+				 * last stop bit; we can increase the error
+				 * margin by shifting the sampling point.
+				 */
+				int shift = min(-8, max(7, deviation / 2));
+
+				hssrr |= (shift << HSCIF_SRHP_SHIFT) &
+					 HSCIF_SRHP_MASK;
+				hssrr |= HSCIF_SRDE;
+			}
+			serial_port_out(port, HSSRR, hssrr);
+		}
 
 		/* Wait one bit interval */
 		udelay((1000000 + (baud - 1)) / baud);
@@ -2474,27 +2515,6 @@ done:
 	 * value obtained by this formula is too small. Therefore, if the value
 	 * is smaller than 20ms, use 20ms as the timeout value for DMA.
 	 */
-	/* byte size and parity */
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		bits = 7;
-		break;
-	case CS6:
-		bits = 8;
-		break;
-	case CS7:
-		bits = 9;
-		break;
-	default:
-		bits = 10;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		bits++;
-	if (termios->c_cflag & PARENB)
-		bits++;
-
 	s->rx_frame = (10000 * bits) / (baud / 100);
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
 	s->rx_timeout = s->buf_len_rx * 2 * s->rx_frame;
@@ -3026,6 +3046,7 @@ static int sci_remove(struct platform_device *dev)
 {
 	struct sci_port *port = platform_get_drvdata(dev);
 
+	sci_ports_in_use &= ~BIT(port->port.line);
 	uart_remove_one_port(&sci_uart_driver, &port->port);
 
 	sci_cleanup_single(port);
@@ -3107,6 +3128,8 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
 
 	/* Get the line number from the aliases node. */
 	id = of_alias_get_id(np, "serial");
+	if (id < 0 && ~sci_ports_in_use)
+		id = ffz(sci_ports_in_use);
 	if (id < 0) {
 		dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
 		return NULL;
@@ -3141,6 +3164,9 @@ static int sci_probe_single(struct platform_device *dev,
 		dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
 		return -EINVAL;
 	}
+	BUILD_BUG_ON(SCI_NPORTS > sizeof(sci_ports_in_use) * 8);
+	if (sci_ports_in_use & BIT(index))
+		return -EBUSY;
 
 	mutex_lock(&sci_uart_registration_lock);
 	if (!sci_uart_driver.state) {
@@ -3239,6 +3265,7 @@ static int sci_probe(struct platform_device *dev)
 	sh_bios_gdb_detach();
 #endif
 
+	sci_ports_in_use |= BIT(dev_id);
 	return 0;
 }
 
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index a5f792fd48d9..0b9e804e61a9 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -130,6 +130,10 @@ enum {
 
 /* HSSRR HSCIF */
 #define HSCIF_SRE	BIT(15)	/* Sampling Rate Register Enable */
+#define HSCIF_SRDE	BIT(14) /* Sampling Point Register Enable */
+
+#define HSCIF_SRHP_SHIFT	8
+#define HSCIF_SRHP_MASK		0x0f00
 
 /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
 #define SCPCR_RTSC	BIT(4)	/* Serial Port RTS# Pin / Output Pin */
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 5f9f01fac6dd..7971997cdead 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -842,16 +842,14 @@ static int asc_serial_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int asc_serial_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 
 	return uart_suspend_port(&asc_uart_driver, port);
 }
 
 static int asc_serial_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 
 	return uart_resume_port(&asc_uart_driver, port);
 }
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index bd72dd843338..8a3e34234e98 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1097,45 +1097,6 @@ static const struct uart_ops cdns_uart_ops = {
 #endif
 };
 
-static struct uart_port cdns_uart_port[CDNS_UART_NR_PORTS];
-
-/**
- * cdns_uart_get_port - Configure the port from platform device resource info
- * @id: Port id
- *
- * Return: a pointer to a uart_port or NULL for failure
- */
-static struct uart_port *cdns_uart_get_port(int id)
-{
-	struct uart_port *port;
-
-	/* Try the given port id if failed use default method */
-	if (id < CDNS_UART_NR_PORTS && cdns_uart_port[id].mapbase != 0) {
-		/* Find the next unused port */
-		for (id = 0; id < CDNS_UART_NR_PORTS; id++)
-			if (cdns_uart_port[id].mapbase == 0)
-				break;
-	}
-
-	if (id >= CDNS_UART_NR_PORTS)
-		return NULL;
-
-	port = &cdns_uart_port[id];
-
-	/* At this point, we've got an empty uart_port struct, initialize it */
-	spin_lock_init(&port->lock);
-	port->membase	= NULL;
-	port->irq	= 0;
-	port->type	= PORT_UNKNOWN;
-	port->iotype	= UPIO_MEM32;
-	port->flags	= UPF_BOOT_AUTOCONF;
-	port->ops	= &cdns_uart_ops;
-	port->fifosize	= CDNS_UART_FIFO_SIZE;
-	port->line	= id;
-	port->dev	= NULL;
-	return port;
-}
-
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 /**
  * cdns_uart_console_wait_tx - Wait for the TX to be full
@@ -1206,6 +1167,10 @@ OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
 OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
 OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
 
+
+/* Static pointer to console port */
+static struct uart_port *console_port;
+
 /**
  * cdns_uart_console_write - perform write operation
  * @co: Console handle
@@ -1215,7 +1180,7 @@ OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
 static void cdns_uart_console_write(struct console *co, const char *s,
 				unsigned int count)
 {
-	struct uart_port *port = &cdns_uart_port[co->index];
+	struct uart_port *port = console_port;
 	unsigned long flags;
 	unsigned int imr, ctrl;
 	int locked = 1;
@@ -1261,15 +1226,13 @@ static void cdns_uart_console_write(struct console *co, const char *s,
  */
 static int __init cdns_uart_console_setup(struct console *co, char *options)
 {
-	struct uart_port *port = &cdns_uart_port[co->index];
+	struct uart_port *port = console_port;
+
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
 
-	if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
-		return -EINVAL;
-
 	if (!port->membase) {
 		pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
 			 co->index);
@@ -1293,20 +1256,6 @@ static struct console cdns_uart_console = {
 	.index	= -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
 	.data	= &cdns_uart_uart_driver,
 };
-
-/**
- * cdns_uart_console_init - Initialization call
- *
- * Return: 0 on success, negative errno otherwise
- */
-static int __init cdns_uart_console_init(void)
-{
-	register_console(&cdns_uart_console);
-	return 0;
-}
-
-console_initcall(cdns_uart_console_init);
-
 #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
 
 static struct uart_driver cdns_uart_uart_driver = {
@@ -1430,8 +1379,7 @@ static int cdns_uart_resume(struct device *device)
 #endif /* ! CONFIG_PM_SLEEP */
 static int __maybe_unused cdns_runtime_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 	struct cdns_uart *cdns_uart = port->private_data;
 
 	clk_disable(cdns_uart->uartclk);
@@ -1441,8 +1389,7 @@ static int __maybe_unused cdns_runtime_suspend(struct device *dev)
 
 static int __maybe_unused cdns_runtime_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 	struct cdns_uart *cdns_uart = port->private_data;
 
 	clk_enable(cdns_uart->pclk);
@@ -1487,6 +1434,9 @@ static int cdns_uart_probe(struct platform_device *pdev)
 			GFP_KERNEL);
 	if (!cdns_uart_data)
 		return -ENOMEM;
+	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
 
 	match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
 	if (match && match->data) {
@@ -1552,15 +1502,24 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	if (id < 0)
 		id = 0;
 
-	/* Initialize the port structure */
-	port = cdns_uart_get_port(id);
-
-	if (!port) {
+	if (id >= CDNS_UART_NR_PORTS) {
 		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
 		rc = -ENODEV;
 		goto err_out_notif_unreg;
 	}
 
+	/* At this point, we've got an empty uart_port struct, initialize it */
+	spin_lock_init(&port->lock);
+	port->membase	= NULL;
+	port->irq	= 0;
+	port->type	= PORT_UNKNOWN;
+	port->iotype	= UPIO_MEM32;
+	port->flags	= UPF_BOOT_AUTOCONF;
+	port->ops	= &cdns_uart_ops;
+	port->fifosize	= CDNS_UART_FIFO_SIZE;
+	port->line	= id;
+	port->dev	= NULL;
+
 	/*
 	 * Register the port.
 	 * This function also registers this device with the tty layer
@@ -1579,6 +1538,17 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+	/*
+	 * If console hasn't been found yet try to assign this port
+	 * because it is required to be assigned for console setup function.
+	 * If register_console() don't assign value, then console_port pointer
+	 * is cleanup.
+	 */
+	if (cdns_uart_uart_driver.cons->index == -1)
+		console_port = port;
+#endif
+
 	rc = uart_add_one_port(&cdns_uart_uart_driver, port);
 	if (rc) {
 		dev_err(&pdev->dev,
@@ -1586,6 +1556,12 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		goto err_out_pm_disable;
 	}
 
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+	/* This is not port which is used for console that's why clean it up */
+	if (cdns_uart_uart_driver.cons->index == -1)
+		console_port = NULL;
+#endif
+
 	return 0;
 
 err_out_pm_disable: