diff options
Diffstat (limited to 'drivers/tty')
30 files changed, 49 insertions, 11381 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index b811442c5ce6..e5041c605fd0 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -151,19 +151,6 @@ config LEGACY_PTY_COUNT When not in use, each legacy PTY occupies 12 bytes on 32-bit architectures and 24 bytes on 64-bit architectures. -config BFIN_JTAG_COMM - tristate "Blackfin JTAG Communication" - depends on BLACKFIN - help - Add support for emulating a TTY device over the Blackfin JTAG. - - To compile this driver as a module, choose M here: the - module will be called bfin_jtag_comm. - -config BFIN_JTAG_COMM_CONSOLE - bool "Console on Blackfin JTAG" - depends on BFIN_JTAG_COMM=y - config SERIAL_NONSTANDARD bool "Non-standard serial port support" depends on HAS_IOMEM @@ -402,19 +389,6 @@ config GOLDFISH_TTY_EARLY_CONSOLE default y if GOLDFISH_TTY=y select SERIAL_EARLYCON -config DA_TTY - bool "DA TTY" - depends on METAG_DA - select SERIAL_NONSTANDARD - help - This enables a TTY on a Dash channel. - -config DA_CONSOLE - bool "DA Console" - depends on DA_TTY - help - This enables a console on a Dash channel. - config MIPS_EJTAG_FDC_TTY bool "MIPS EJTAG Fast Debug Channel TTY" depends on MIPS_CDMM diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 8ce3a8661b31..c72cafdf32b4 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_SERIAL_DEV_BUS) += serdev/ # tty drivers obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o -obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_CYCLADES) += cyclades.o obj-$(CONFIG_ISI) += isicom.o obj-$(CONFIG_MOXA_INTELLIO) += moxa.o @@ -32,7 +31,6 @@ obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o obj-$(CONFIG_SYNCLINK) += synclink.o obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o -obj-$(CONFIG_DA_TTY) += metag_da.o obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o obj-$(CONFIG_VCC) += vcc.o diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c deleted file mode 100644 index c369bf27a67b..000000000000 --- a/drivers/tty/bfin_jtag_comm.c +++ /dev/null @@ -1,353 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * TTY over Blackfin JTAG Communication - * - * Copyright 2008-2009 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - */ - -#define DRV_NAME "bfin-jtag-comm" -#define DEV_NAME "ttyBFJC" -#define pr_fmt(fmt) DRV_NAME ": " fmt - -#include <linux/circ_buf.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/kthread.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/tty.h> -#include <linux/tty_driver.h> -#include <linux/tty_flip.h> -#include <linux/atomic.h> - -#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); }) - -/* See the Debug/Emulation chapter in the HRM */ -#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ -#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ -#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ -#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ - -static inline uint32_t bfin_write_emudat(uint32_t emudat) -{ - __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); - return emudat; -} - -static inline uint32_t bfin_read_emudat(void) -{ - uint32_t emudat; - __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); - return emudat; -} - -static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d) -{ - return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24)); -} - -#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */ -#define CIRC_MASK (CIRC_SIZE - 1) -#define circ_empty(circ) ((circ)->head == (circ)->tail) -#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE) -#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE) -#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK]) - -static struct tty_driver *bfin_jc_driver; -static struct task_struct *bfin_jc_kthread; -static struct tty_port port; -static volatile struct circ_buf bfin_jc_write_buf; - -static int -bfin_jc_emudat_manager(void *arg) -{ - uint32_t inbound_len = 0, outbound_len = 0; - - while (!kthread_should_stop()) { - struct tty_struct *tty = tty_port_tty_get(&port); - /* no one left to give data to, so sleep */ - if (tty == NULL && circ_empty(&bfin_jc_write_buf)) { - pr_debug("waiting for readers\n"); - __set_current_state(TASK_UNINTERRUPTIBLE); - schedule(); - continue; - } - - /* no data available, so just chill */ - if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) { - pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n", - inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head); - tty_kref_put(tty); - if (inbound_len) - schedule(); - else - schedule_timeout_interruptible(HZ); - continue; - } - - /* if incoming data is ready, eat it */ - if (bfin_read_DBGSTAT() & EMUDIF) { - uint32_t emudat = bfin_read_emudat(); - if (inbound_len == 0) { - pr_debug("incoming length: 0x%08x\n", emudat); - inbound_len = emudat; - } else { - size_t num_chars = (4 <= inbound_len ? 4 : inbound_len); - pr_debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars); - inbound_len -= num_chars; - tty_insert_flip_string(&port, (unsigned char *)&emudat, num_chars); - tty_flip_buffer_push(&port); - } - } - - /* if outgoing data is ready, post it */ - if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) { - if (outbound_len == 0) { - outbound_len = circ_cnt(&bfin_jc_write_buf); - bfin_write_emudat(outbound_len); - pr_debug("outgoing length: 0x%08x\n", outbound_len); - } else { - int tail = bfin_jc_write_buf.tail; - size_t ate = (4 <= outbound_len ? 4 : outbound_len); - uint32_t emudat = - bfin_write_emudat_chars( - circ_byte(&bfin_jc_write_buf, tail + 0), - circ_byte(&bfin_jc_write_buf, tail + 1), - circ_byte(&bfin_jc_write_buf, tail + 2), - circ_byte(&bfin_jc_write_buf, tail + 3) - ); - bfin_jc_write_buf.tail += ate; - outbound_len -= ate; - if (tty) - tty_wakeup(tty); - pr_debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate); - } - } - tty_kref_put(tty); - } - - __set_current_state(TASK_RUNNING); - return 0; -} - -static int -bfin_jc_open(struct tty_struct *tty, struct file *filp) -{ - unsigned long flags; - - spin_lock_irqsave(&port.lock, flags); - port.count++; - spin_unlock_irqrestore(&port.lock, flags); - tty_port_tty_set(&port, tty); - wake_up_process(bfin_jc_kthread); - return 0; -} - -static void -bfin_jc_close(struct tty_struct *tty, struct file *filp) -{ - unsigned long flags; - bool last; - - spin_lock_irqsave(&port.lock, flags); - last = --port.count == 0; - spin_unlock_irqrestore(&port.lock, flags); - if (last) - tty_port_tty_set(&port, NULL); - wake_up_process(bfin_jc_kthread); -} - -/* XXX: we dont handle the put_char() case where we must handle count = 1 */ -static int -bfin_jc_circ_write(const unsigned char *buf, int count) -{ - int i; - count = min(count, circ_free(&bfin_jc_write_buf)); - pr_debug("going to write chunk of %i bytes\n", count); - for (i = 0; i < count; ++i) - circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i]; - bfin_jc_write_buf.head += i; - return i; -} - -#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE -# define console_lock() -# define console_unlock() -#endif -static int -bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - int i; - console_lock(); - i = bfin_jc_circ_write(buf, count); - console_unlock(); - wake_up_process(bfin_jc_kthread); - return i; -} - -static void -bfin_jc_flush_chars(struct tty_struct *tty) -{ - wake_up_process(bfin_jc_kthread); -} - -static int -bfin_jc_write_room(struct tty_struct *tty) -{ - return circ_free(&bfin_jc_write_buf); -} - -static int -bfin_jc_chars_in_buffer(struct tty_struct *tty) -{ - return circ_cnt(&bfin_jc_write_buf); -} - -static const struct tty_operations bfin_jc_ops = { - .open = bfin_jc_open, - .close = bfin_jc_close, - .write = bfin_jc_write, - /*.put_char = bfin_jc_put_char,*/ - .flush_chars = bfin_jc_flush_chars, - .write_room = bfin_jc_write_room, - .chars_in_buffer = bfin_jc_chars_in_buffer, -}; - -static int __init bfin_jc_init(void) -{ - int ret; - - bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME); - if (IS_ERR(bfin_jc_kthread)) - return PTR_ERR(bfin_jc_kthread); - - ret = -ENOMEM; - - bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0; - bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL); - if (!bfin_jc_write_buf.buf) - goto err_buf; - - bfin_jc_driver = alloc_tty_driver(1); - if (!bfin_jc_driver) - goto err_driver; - - tty_port_init(&port); - - bfin_jc_driver->driver_name = DRV_NAME; - bfin_jc_driver->name = DEV_NAME; - bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; - bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL; - bfin_jc_driver->init_termios = tty_std_termios; - tty_set_operations(bfin_jc_driver, &bfin_jc_ops); - tty_port_link_device(&port, bfin_jc_driver, 0); - - ret = tty_register_driver(bfin_jc_driver); - if (ret) - goto err; - - pr_init(KERN_INFO DRV_NAME ": initialized\n"); - - return 0; - - err: - tty_port_destroy(&port); - put_tty_driver(bfin_jc_driver); - err_driver: - kfree(bfin_jc_write_buf.buf); - err_buf: - kthread_stop(bfin_jc_kthread); - return ret; -} -module_init(bfin_jc_init); - -static void __exit bfin_jc_exit(void) -{ - kthread_stop(bfin_jc_kthread); - kfree(bfin_jc_write_buf.buf); - tty_unregister_driver(bfin_jc_driver); - put_tty_driver(bfin_jc_driver); - tty_port_destroy(&port); -} -module_exit(bfin_jc_exit); - -#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -static void -bfin_jc_straight_buffer_write(const char *buf, unsigned count) -{ - unsigned ate = 0; - while (bfin_read_DBGSTAT() & EMUDOF) - continue; - bfin_write_emudat(count); - while (ate < count) { - while (bfin_read_DBGSTAT() & EMUDOF) - continue; - bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]); - ate += 4; - } -} -#endif - -#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE -static void -bfin_jc_console_write(struct console *co, const char *buf, unsigned count) -{ - if (bfin_jc_kthread == NULL) - bfin_jc_straight_buffer_write(buf, count); - else - bfin_jc_circ_write(buf, count); -} - -static struct tty_driver * -bfin_jc_console_device(struct console *co, int *index) -{ - *index = co->index; - return bfin_jc_driver; -} - -static struct console bfin_jc_console = { - .name = DEV_NAME, - .write = bfin_jc_console_write, - .device = bfin_jc_console_device, - .flags = CON_ANYTIME | CON_PRINTBUFFER, - .index = -1, -}; - -static int __init bfin_jc_console_init(void) -{ - register_console(&bfin_jc_console); - return 0; -} -console_initcall(bfin_jc_console_init); -#endif - -#ifdef CONFIG_EARLY_PRINTK -static void __init -bfin_jc_early_write(struct console *co, const char *buf, unsigned int count) -{ - bfin_jc_straight_buffer_write(buf, count); -} - -static struct console bfin_jc_early_console __initdata = { - .name = "early_BFJC", - .write = bfin_jc_early_write, - .flags = CON_ANYTIME | CON_PRINTBUFFER, - .index = -1, -}; - -struct console * __init -bfin_jc_early_init(unsigned int port, unsigned int cflag) -{ - return &bfin_jc_early_console; -} -#endif - -MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>"); -MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication"); -MODULE_LICENSE("GPL"); diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index fec457edad14..3bade5ad3d71 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -88,15 +88,6 @@ config HVC_DCC driver. This console is used through a JTAG only on ARM. If you don't have a JTAG then you probably don't want this option. -config HVC_BFIN_JTAG - bool "Blackfin JTAG console" - depends on BLACKFIN - select HVC_DRIVER - help - This console uses the Blackfin JTAG to create a console under the - the HVC driver. If you don't have JTAG, then you probably don't - want this option. - config HVCS tristate "IBM Hypervisor Virtual Console Server support" depends on PPC_PSERIES && HVC_CONSOLE diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index 0b02ec7f1dfd..7da1934d34e8 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -3,12 +3,10 @@ obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi_lib.o obj-$(CONFIG_HVC_OPAL) += hvc_opal.o hvsi_lib.o obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o -obj-$(CONFIG_HVC_TILE) += hvc_tile.o obj-$(CONFIG_HVC_DCC) += hvc_dcc.o obj-$(CONFIG_HVC_DRIVER) += hvc_console.o obj-$(CONFIG_HVC_IRQ) += hvc_irq.o obj-$(CONFIG_HVC_XEN) += hvc_xen.o obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o -obj-$(CONFIG_HVC_BFIN_JTAG) += hvc_bfin_jtag.o obj-$(CONFIG_HVCS) += hvcs.o diff --git a/drivers/tty/hvc/hvc_bfin_jtag.c b/drivers/tty/hvc/hvc_bfin_jtag.c deleted file mode 100644 index dd7cae4c195b..000000000000 --- a/drivers/tty/hvc/hvc_bfin_jtag.c +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Console via Blackfin JTAG Communication - * - * Copyright 2008-2011 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - */ - -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/moduleparam.h> -#include <linux/types.h> - -#include "hvc_console.h" - -/* See the Debug/Emulation chapter in the HRM */ -#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ -#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ -#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ -#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ - -/* Helper functions to glue the register API to simple C operations */ -static inline uint32_t bfin_write_emudat(uint32_t emudat) -{ - __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); - return emudat; -} - -static inline uint32_t bfin_read_emudat(void) -{ - uint32_t emudat; - __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); - return emudat; -} - -/* Send data to the host */ -static int hvc_bfin_put_chars(uint32_t vt, const char *buf, int count) -{ - static uint32_t outbound_len; - uint32_t emudat; - int ret; - - if (bfin_read_DBGSTAT() & EMUDOF) - return 0; - - if (!outbound_len) { - outbound_len = count; - bfin_write_emudat(outbound_len); - return 0; - } - - ret = min(outbound_len, (uint32_t)4); - memcpy(&emudat, buf, ret); - bfin_write_emudat(emudat); - outbound_len -= ret; - - return ret; -} - -/* Receive data from the host */ -static int hvc_bfin_get_chars(uint32_t vt, char *buf, int count) -{ - static uint32_t inbound_len; - uint32_t emudat; - int ret; - - if (!(bfin_read_DBGSTAT() & EMUDIF)) - return 0; - emudat = bfin_read_emudat(); - - if (!inbound_len) { - inbound_len = emudat; - return 0; - } - - ret = min(inbound_len, (uint32_t)4); - memcpy(buf, &emudat, ret); - inbound_len -= ret; - - return ret; -} - -/* Glue the HVC layers to the Blackfin layers */ -static const struct hv_ops hvc_bfin_get_put_ops = { - .get_chars = hvc_bfin_get_chars, - .put_chars = hvc_bfin_put_chars, -}; - -static int __init hvc_bfin_console_init(void) -{ - hvc_instantiate(0, 0, &hvc_bfin_get_put_ops); - return 0; -} -console_initcall(hvc_bfin_console_init); - -static int __init hvc_bfin_init(void) -{ - hvc_alloc(0, 0, &hvc_bfin_get_put_ops, 128); - return 0; -} -device_initcall(hvc_bfin_init); diff --git a/drivers/tty/hvc/hvc_tile.c b/drivers/tty/hvc/hvc_tile.c deleted file mode 100644 index b517c0661abb..000000000000 --- a/drivers/tty/hvc/hvc_tile.c +++ /dev/null @@ -1,196 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * Tilera TILE Processor hypervisor console - */ - -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/moduleparam.h> -#include <linux/platform_device.h> -#include <linux/types.h> - -#include <asm/setup.h> -#include <arch/sim_def.h> - -#include <hv/hypervisor.h> - -#include "hvc_console.h" - -static int use_sim_console; -static int __init sim_console(char *str) -{ - use_sim_console = 1; - return 0; -} -early_param("sim_console", sim_console); - -int tile_console_write(const char *buf, int count) -{ - if (unlikely(use_sim_console)) { - int i; - for (i = 0; i < count; ++i) - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (buf[i] << _SIM_CONTROL_OPERATOR_BITS)); - __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (SIM_PUTC_FLUSH_BINARY << - _SIM_CONTROL_OPERATOR_BITS)); - return 0; - } else { - /* Translate 0 bytes written to EAGAIN for hvc_console_print. */ - return hv_console_write((HV_VirtAddr)buf, count) ?: -EAGAIN; - } -} - -static int hvc_tile_put_chars(uint32_t vt, const char *buf, int count) -{ - return tile_console_write(buf, count); -} - -static int hvc_tile_get_chars(uint32_t vt, char *buf, int count) -{ - int i, c; - - for (i = 0; i < count; ++i) { - c = hv_console_read_if_ready(); - if (c < 0) - break; - buf[i] = c; - } - - return i; -} - -#ifdef __tilegx__ -/* - * IRQ based callbacks. - */ -static int hvc_tile_notifier_add_irq(struct hvc_struct *hp, int irq) -{ - int rc; - int cpu = raw_smp_processor_id(); /* Choose an arbitrary cpu */ - HV_Coord coord = { .x = cpu_x(cpu), .y = cpu_y(cpu) }; - - rc = notifier_add_irq(hp, irq); - if (rc) - return rc; - - /* - * Request that the hypervisor start sending us interrupts. - * If the hypervisor returns an error, we still return 0, so that - * we can fall back to polling. - */ - if (hv_console_set_ipi(KERNEL_PL, irq, coord) < 0) - notifier_del_irq(hp, irq); - - return 0; -} - -static void hvc_tile_notifier_del_irq(struct hvc_struct *hp, int irq) -{ - HV_Coord coord = { 0, 0 }; - - /* Tell the hypervisor to stop sending us interrupts. */ - hv_console_set_ipi(KERNEL_PL, -1, coord); - - notifier_del_irq(hp, irq); -} - -static void hvc_tile_notifier_hangup_irq(struct hvc_struct *hp, int irq) -{ - hvc_tile_notifier_del_irq(hp, irq); -} -#endif - -static const struct hv_ops hvc_tile_get_put_ops = { - .get_chars = hvc_tile_get_chars, - .put_chars = hvc_tile_put_chars, -#ifdef __tilegx__ - .notifier_add = hvc_tile_notifier_add_irq, - .notifier_del = hvc_tile_notifier_del_irq, - .notifier_hangup = hvc_tile_notifier_hangup_irq, -#endif -}; - - -#ifdef __tilegx__ -static int hvc_tile_probe(struct platform_device *pdev) -{ - struct hvc_struct *hp; - int tile_hvc_irq; - - /* Create our IRQ and register it. */ - tile_hvc_irq = irq_alloc_hwirq(-1); - if (!tile_hvc_irq) - return -ENXIO; - - tile_irq_activate(tile_hvc_irq, TILE_IRQ_PERCPU); - hp = hvc_alloc(0, tile_hvc_irq, &hvc_tile_get_put_ops, 128); - if (IS_ERR(hp)) { - irq_free_hwirq(tile_hvc_irq); - return PTR_ERR(hp); - } - dev_set_drvdata(&pdev->dev, hp); - - return 0; -} - -static int hvc_tile_remove(struct platform_device *pdev) -{ - int rc; - struct hvc_struct *hp = dev_get_drvdata(&pdev->dev); - - rc = hvc_remove(hp); - if (rc == 0) - irq_free_hwirq(hp->data); - - return rc; -} - -static void hvc_tile_shutdown(struct platform_device *pdev) -{ - struct hvc_struct *hp = dev_get_drvdata(&pdev->dev); - - hvc_tile_notifier_del_irq(hp, hp->data); -} - -static struct platform_device hvc_tile_pdev = { - .name = "hvc-tile", - .id = 0, -}; - -static struct platform_driver hvc_tile_driver = { - .probe = hvc_tile_probe, - .remove = hvc_tile_remove, - .shutdown = hvc_tile_shutdown, - .driver = { - .name = "hvc-tile", - } -}; -#endif - -static int __init hvc_tile_console_init(void) -{ - hvc_instantiate(0, 0, &hvc_tile_get_put_ops); - add_preferred_console("hvc", 0, NULL); - return 0; -} -console_initcall(hvc_tile_console_init); - -static int __init hvc_tile_init(void) -{ -#ifndef __tilegx__ - struct hvc_struct *hp; - hp = hvc_alloc(0, 0, &hvc_tile_get_put_ops, 128); - return PTR_ERR_OR_ZERO(hp); -#else - platform_device_register(&hvc_tile_pdev); - return platform_driver_register(&hvc_tile_driver); -#endif -} -device_initcall(hvc_tile_init); diff --git a/drivers/tty/metag_da.c b/drivers/tty/metag_da.c deleted file mode 100644 index 99eaed4b2dbc..000000000000 --- a/drivers/tty/metag_da.c +++ /dev/null @@ -1,665 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dashtty.c - tty driver for Dash channels interface. - * - * Copyright (C) 2007,2008,2012 Imagination Technologies - */ - -#include <linux/atomic.h> -#include <linux/completion.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/export.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/kthread.h> -#include <linux/moduleparam.h> -#include <linux/mutex.h> -#include <linux/sched.h> -#include <linux/serial.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/tty.h> -#include <linux/tty_driver.h> -#include <linux/tty_flip.h> -#include <linux/uaccess.h> - -#include <asm/da.h> - -/* Channel error codes */ -#define CONAOK 0 -#define CONERR 1 -#define CONBAD 2 -#define CONPRM 3 -#define CONADR 4 -#define CONCNT 5 -#define CONCBF 6 -#define CONCBE 7 -#define CONBSY 8 - -/* Default channel for the console */ -#define CONSOLE_CHANNEL 1 - -#define NUM_TTY_CHANNELS 6 - -/* Auto allocate */ -#define DA_TTY_MAJOR 0 - -/* A speedy poll rate helps the userland debug process connection response. - * But, if you set it too high then no other userland processes get much - * of a look in. - */ -#define DA_TTY_POLL (HZ / 50) - -/* - * A short put delay improves latency but has a high throughput overhead - */ -#define DA_TTY_PUT_DELAY (HZ / 100) - -static atomic_t num_channels_need_poll = ATOMIC_INIT(0); - -static struct timer_list poll_timer; - -static struct tty_driver *channel_driver; - -static struct timer_list put_timer; -static struct task_struct *dashtty_thread; - -/* - * The console_poll parameter determines whether the console channel should be - * polled for input. - * By default the console channel isn't polled at all, in order to avoid the - * overhead, but that means it isn't possible to have a login on /dev/console. - */ -static bool console_poll; -module_param(console_poll, bool, S_IRUGO); - -#define RX_BUF_SIZE 1024 - -enum { - INCHR = 1, - OUTCHR, - RDBUF, - WRBUF, - RDSTAT -}; - -/** - * struct dashtty_port - Wrapper struct for dashtty tty_port. - * @port: TTY port data - * @rx_lock: Lock for rx_buf. - * This protects between the poll timer and user context. - * It's also held during read SWITCH operations. - * @rx_buf: Read buffer - * @xmit_lock: Lock for xmit_*, and port.xmit_buf. - * This protects between user context and kernel thread. - * It's also held during write SWITCH operations. - * @xmit_cnt: Size of xmit buffer contents - * @xmit_head: Head of xmit buffer where data is written - * @xmit_tail: Tail of xmit buffer where data is read - * @xmit_empty: Completion for xmit buffer being empty - */ -struct dashtty_port { - struct tty_port port; - spinlock_t rx_lock; - void *rx_buf; - struct mutex xmit_lock; - unsigned int xmit_cnt; - unsigned int xmit_head; - unsigned int xmit_tail; - struct completion xmit_empty; -}; - -static struct dashtty_port dashtty_ports[NUM_TTY_CHANNELS]; - -static atomic_t dashtty_xmit_cnt = ATOMIC_INIT(0); -static wait_queue_head_t dashtty_waitqueue; - -/* - * Low-level DA channel access routines - */ -static int chancall(int in_bios_function, int in_channel, - int in_arg2, void *in_arg3, - void *in_arg4) -{ - register int bios_function asm("D1Ar1") = in_bios_function; - register int channel asm("D0Ar2") = in_channel; - register int arg2 asm("D1Ar3") = in_arg2; - register void *arg3 asm("D0Ar4") = in_arg3; - register void *arg4 asm("D1Ar5") = in_arg4; - register int bios_call asm("D0Ar6") = 3; - register int result asm("D0Re0"); - - asm volatile ( - "MSETL [A0StP++], %6,%4,%2\n\t" - "ADD A0StP, A0StP, #8\n\t" - "SWITCH #0x0C30208\n\t" - "GETD %0, [A0StP+#-8]\n\t" - "SUB A0StP, A0StP, #(4*6)+8\n\t" - : "=d" (result) /* outs */ - : "d" (bios_function), - "d" (channel), - "d" (arg2), - "d" (arg3), - "d" (arg4), - "d" (bios_call) /* ins */ - : "memory"); - - return result; -} - -/* - * Attempts to fetch count bytes from channel and returns actual count. - */ -static int fetch_data(unsigned int channel) -{ - struct dashtty_port *dport = &dashtty_ports[channel]; - int received = 0; - - spin_lock_bh(&dport->rx_lock); - /* check the port isn't being shut down */ - if (!dport->rx_buf) - goto unlock; - if (chancall(RDBUF, channel, RX_BUF_SIZE, - (void *)dport->rx_buf, &received) == CONAOK) { - if (received) { - int space; - unsigned char *cbuf; - - space = tty_prepare_flip_string(&dport->port, &cbuf, - received); - - if (space <= 0) - goto unlock; - - memcpy(cbuf, dport->rx_buf, space); - tty_flip_buffer_push(&dport->port); - } - } -unlock: - spin_unlock_bh(&dport->rx_lock); - - return received; -} - -/** - * find_channel_to_poll() - Returns number of the next channel to poll. - * Returns: The number of the next channel to poll, or -1 if none need - * polling. - */ -static int find_channel_to_poll(void) -{ - static int last_polled_channel; - int last = last_polled_channel; - int chan; - struct dashtty_port *dport; - - for (chan = last + 1; ; ++chan) { - if (chan >= NUM_TTY_CHANNELS) - chan = 0; - - dport = &dashtty_ports[chan]; - if (dport->rx_buf) { - last_polled_channel = chan; - return chan; - } - - if (chan == last) - break; - } - return -1; -} - -/** - * put_channel_data() - Write out a block of channel data. - * @chan: DA channel number. - * - * Write a single block of data out to the debug adapter. If the circular buffer - * is wrapped then only the first block is written. - * - * Returns: 1 if the remote buffer was too full to accept data. - * 0 otherwise. - */ -static int put_channel_data(unsigned int chan) -{ - struct dashtty_port *dport; - struct tty_struct *tty; - int number_written; - unsigned int count = 0; - - dport = &dashtty_ports[chan]; - mutex_lock(&dport->xmit_lock); - if (dport->xmit_cnt) { - count = min((unsigned int)(SERIAL_XMIT_SIZE - dport->xmit_tail), - dport->xmit_cnt); - chancall(WRBUF, chan, count, - dport->port.xmit_buf + dport->xmit_tail, - &number_written); - dport->xmit_cnt -= number_written; - if (!dport->xmit_cnt) { - /* reset pointers to avoid wraps */ - dport->xmit_head = 0; - dport->xmit_tail = 0; - complete(&dport->xmit_empty); - } else { - dport->xmit_tail += number_written; - if (dport->xmit_tail >= SERIAL_XMIT_SIZE) - dport->xmit_tail -= SERIAL_XMIT_SIZE; - } - atomic_sub(number_written, &dashtty_xmit_cnt); - } - mutex_unlock(&dport->xmit_lock); - - /* if we've made more data available, wake up tty */ - if (count && number_written) { - tty = tty_port_tty_get(&dport->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } - } - - /* did the write fail? */ - return count && !number_written; -} - -/** - * put_data() - Kernel thread to write out blocks of channel data to DA. - * @arg: Unused. - * - * This kernel thread runs while @dashtty_xmit_cnt != 0, and loops over the - * channels to write out any buffered data. If any of the channels stall due to - * the remote buffer being full, a hold off happens to allow the debugger to - * drain the buffer. - */ -static int put_data(void *arg) -{ - unsigned int chan, stall; - - __set_current_state(TASK_RUNNING); - while (!kthread_should_stop()) { - /* - * For each channel see if there's anything to transmit in the - * port's xmit_buf. - */ - stall = 0; - for (chan = 0; chan < NUM_TTY_CHANNELS; ++chan) - stall += put_channel_data(chan); - - /* - * If some of the buffers are full, hold off for a short while - * to allow them to empty. - */ - if (stall) - msleep(25); - - wait_event_interruptible(dashtty_waitqueue, - atomic_read(&dashtty_xmit_cnt)); - } - - return 0; -} - -/* - * This gets called every DA_TTY_POLL and polls the channels for data - */ -static void dashtty_timer(struct timer_list *poll_timer) -{ - int channel; - - /* If there are no ports open do nothing and don't poll again. */ - if (!atomic_read(&num_channels_need_poll)) - return; - - channel = find_channel_to_poll(); - - /* Did we find a channel to poll? */ - if (channel >= 0) - fetch_data(channel); - - mod_timer(poll_timer, jiffies + DA_TTY_POLL); -} - -static void add_poll_timer(struct timer_list *poll_timer) -{ - timer_setup(poll_timer, dashtty_timer, TIMER_PINNED); - poll_timer->expires = jiffies + DA_TTY_POLL; - - /* - * Always attach the timer to the boot CPU. The DA channels are per-CPU - * so all polling should be from a single CPU. - */ - add_timer_on(poll_timer, 0); -} - -static int dashtty_port_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct dashtty_port *dport = container_of(port, struct dashtty_port, - port); - void *rx_buf; - - /* Allocate the buffer we use for writing data */ - if (tty_port_alloc_xmit_buf(port) < 0) - goto err; - - /* Allocate the buffer we use for reading data */ - rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL); - if (!rx_buf) - goto err_free_xmit; - - spin_lock_bh(&dport->rx_lock); - dport->rx_buf = rx_buf; - spin_unlock_bh(&dport->rx_lock); - - /* - * Don't add the poll timer if we're opening a console. This - * avoids the overhead of polling the Dash but means it is not - * possible to have a login on /dev/console. - * - */ - if (console_poll || dport != &dashtty_ports[CONSOLE_CHANNEL]) - if (atomic_inc_return(&num_channels_need_poll) == 1) - add_poll_timer(&poll_timer); - - return 0; -err_free_xmit: - tty_port_free_xmit_buf(port); -err: - return -ENOMEM; -} - -static void dashtty_port_shutdown(struct tty_port *port) -{ - struct dashtty_port *dport = container_of(port, struct dashtty_port, - port); - void *rx_buf; - unsigned int count; - - /* stop reading */ - if (console_poll || dport != &dashtty_ports[CONSOLE_CHANNEL]) - if (atomic_dec_and_test(&num_channels_need_poll)) - del_timer_sync(&poll_timer); - - mutex_lock(&dport->xmit_lock); - count = dport->xmit_cnt; - mutex_unlock(&dport->xmit_lock); - if (count) { - /* - * There's still data to write out, so wake and wait for the - * writer thread to drain the buffer. - */ - del_timer(&put_timer); - wake_up_interruptible(&dashtty_waitqueue); - wait_for_completion(&dport->xmit_empty); - } - - /* Null the read buffer (timer could still be running!) */ - spin_lock_bh(&dport->rx_lock); - rx_buf = dport->rx_buf; - dport->rx_buf = NULL; - spin_unlock_bh(&dport->rx_lock); - /* Free the read buffer */ - kfree(rx_buf); - - /* Free the write buffer */ - tty_port_free_xmit_buf(port); -} - -static const struct tty_port_operations dashtty_port_ops = { - .activate = dashtty_port_activate, - .shutdown = dashtty_port_shutdown, -}; - -static int dashtty_install(struct tty_driver *driver, struct tty_struct *tty) -{ - return tty_port_install(&dashtty_ports[tty->index].port, driver, tty); -} - -static int dashtty_open(struct tty_struct *tty, struct file *filp) -{ - return tty_port_open(tty->port, tty, filp); -} - -static void dashtty_close(struct tty_struct *tty, struct file *filp) -{ - return tty_port_close(tty->port, tty, filp); -} - -static void dashtty_hangup(struct tty_struct *tty) -{ - int channel; - struct dashtty_port *dport; - - channel = tty->index; - dport = &dashtty_ports[channel]; - - /* drop any data in the xmit buffer */ - mutex_lock(&dport->xmit_lock); - if (dport->xmit_cnt) { - atomic_sub(dport->xmit_cnt, &dashtty_xmit_cnt); - dport->xmit_cnt = 0; - dport->xmit_head = 0; - dport->xmit_tail = 0; - complete(&dport->xmit_empty); - } - mutex_unlock(&dport->xmit_lock); - - tty_port_hangup(tty->port); -} - -/** - * dashtty_put_timer() - Delayed wake up of kernel thread. - * @ignored: unused - * - * This timer function wakes up the kernel thread if any data exists in the - * buffers. It is used to delay the expensive writeout until the writer has - * stopped writing. - */ -static void dashtty_put_timer(struct timer_list *unused) -{ - if (atomic_read(&dashtty_xmit_cnt)) - wake_up_interruptible(&dashtty_waitqueue); -} - -static int dashtty_write(struct tty_struct *tty, const unsigned char *buf, - int total) -{ - int channel, count, block; - struct dashtty_port *dport; - - /* Determine the channel */ - channel = tty->index; - dport = &dashtty_ports[channel]; - - /* - * Write to output buffer. - * - * The reason that we asynchronously write the buffer is because if we - * were to write the buffer synchronously then because DA channels are - * per-CPU the buffer would be written to the channel of whatever CPU - * we're running on. - * - * What we actually want to happen is have all input and output done on - * one CPU. - */ - mutex_lock(&dport->xmit_lock); - /* work out how many bytes we can write to the xmit buffer */ - total = min(total, (int)(SERIAL_XMIT_SIZE - dport->xmit_cnt)); - atomic_add(total, &dashtty_xmit_cnt); - dport->xmit_cnt += total; - /* write the actual bytes (may need splitting if it wraps) */ - for (count = total; count; count -= block) { - block = min(count, (int)(SERIAL_XMIT_SIZE - dport->xmit_head)); - memcpy(dport->port.xmit_buf + dport->xmit_head, buf, block); - dport->xmit_head += block; - if (dport->xmit_head >= SERIAL_XMIT_SIZE) - dport->xmit_head -= SERIAL_XMIT_SIZE; - buf += block; - } - count = dport->xmit_cnt; - /* xmit buffer no longer empty? */ - if (count) - reinit_completion(&dport->xmit_empty); - mutex_unlock(&dport->xmit_lock); - - if (total) { - /* - * If the buffer is full, wake up the kthread, otherwise allow - * some more time for the buffer to fill up a bit before waking - * it. - */ - if (count == SERIAL_XMIT_SIZE) { - del_timer(&put_timer); - wake_up_interruptible(&dashtty_waitqueue); - } else { - mod_timer(&put_timer, jiffies + DA_TTY_PUT_DELAY); - } - } - return total; -} - -static int dashtty_write_room(struct tty_struct *tty) -{ - struct dashtty_port *dport; - int channel; - int room; - - channel = tty->index; - dport = &dashtty_ports[channel]; - - /* report the space in the xmit buffer */ - mutex_lock(&dport->xmit_lock); - room = SERIAL_XMIT_SIZE - dport->xmit_cnt; - mutex_unlock(&dport->xmit_lock); - - return room; -} - -static int dashtty_chars_in_buffer(struct tty_struct *tty) -{ - struct dashtty_port *dport; - int channel; - int chars; - - channel = tty->index; - dport = &dashtty_ports[channel]; - - /* report the number of bytes in the xmit buffer */ - mutex_lock(&dport->xmit_lock); - chars = dport->xmit_cnt; - mutex_unlock(&dport->xmit_lock); - - return chars; -} - -static const struct tty_operations dashtty_ops = { - .install = dashtty_install, - .open = dashtty_open, - .close = dashtty_close, - .hangup = dashtty_hangup, - .write = dashtty_write, - .write_room = dashtty_write_room, - .chars_in_buffer = dashtty_chars_in_buffer, -}; - -static int __init dashtty_init(void) -{ - int ret; - int nport; - struct dashtty_port *dport; - - if (!metag_da_enabled()) - return -ENODEV; - - channel_driver = tty_alloc_driver(NUM_TTY_CHANNELS, - TTY_DRIVER_REAL_RAW); - if (IS_ERR(channel_driver)) - return PTR_ERR(channel_driver); - - channel_driver->driver_name = "metag_da"; - channel_driver->name = "ttyDA"; - channel_driver->major = DA_TTY_MAJOR; - channel_driver->minor_start = 0; - channel_driver->type = TTY_DRIVER_TYPE_SERIAL; - channel_driver->subtype = SERIAL_TYPE_NORMAL; - channel_driver->init_termios = tty_std_termios; - channel_driver->init_termios.c_cflag |= CLOCAL; - - tty_set_operations(channel_driver, &dashtty_ops); - for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) { - dport = &dashtty_ports[nport]; - tty_port_init(&dport->port); - dport->port.ops = &dashtty_port_ops; - spin_lock_init(&dport->rx_lock); - mutex_init(&dport->xmit_lock); - /* the xmit buffer starts empty, i.e. completely written */ - init_completion(&dport->xmit_empty); - complete(&dport->xmit_empty); - } - - timer_setup(&put_timer, dashtty_put_timer, 0); - - init_waitqueue_head(&dashtty_waitqueue); - dashtty_thread = kthread_create(put_data, NULL, "ttyDA"); - if (IS_ERR(dashtty_thread)) { - pr_err("Couldn't create dashtty thread\n"); - ret = PTR_ERR(dashtty_thread); - goto err_destroy_ports; - } - /* - * Bind the writer thread to the boot CPU so it can't migrate. - * DA channels are per-CPU and we want all channel I/O to be on a single - * predictable CPU. - */ - kthread_bind(dashtty_thread, 0); - wake_up_process(dashtty_thread); - - ret = tty_register_driver(channel_driver); - - if (ret < 0) { - pr_err("Couldn't install dashtty driver: err %d\n", - ret); - goto err_stop_kthread; - } - - return 0; - -err_stop_kthread: - kthread_stop(dashtty_thread); -err_destroy_ports: - for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) { - dport = &dashtty_ports[nport]; - tty_port_destroy(&dport->port); - } - put_tty_driver(channel_driver); - return ret; -} -device_initcall(dashtty_init); - -#ifdef CONFIG_DA_CONSOLE - -static void dash_console_write(struct console *co, const char *s, - unsigned int count) -{ - int actually_written; - - chancall(WRBUF, CONSOLE_CHANNEL, count, (void *)s, &actually_written); -} - -static struct tty_driver *dash_console_device(struct console *c, int *index) -{ - *index = c->index; - return channel_driver; -} - -struct console dash_console = { - .name = "ttyDA", - .write = dash_console_write, - .device = dash_console_device, - .flags = CON_PRINTBUFFER, - .index = 1, -}; - -#endif diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 5c0e59e8fe46..cbe98bc2b998 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2180,6 +2180,12 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, } if (tty_hung_up_p(file)) break; + /* + * Abort readers for ttys which never actually + * get hung up. See __tty_hangup(). + */ + if (test_bit(TTY_HUPPING, &tty->flags)) + break; if (!timeout) break; if (file->f_flags & O_NONBLOCK) { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 54adf8d56350..a93f77ab3da0 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3387,11 +3387,9 @@ static int serial_pci_is_class_communication(struct pci_dev *dev) /* * If it is not a communications device or the programming * interface is greater than 6, give up. - * - * (Should we try to make guesses for multiport serial devices - * later?) */ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) && ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || (dev->class & 0xff) > 6) return -ENODEV; @@ -3428,6 +3426,12 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { int num_iomem, num_port, first_port = -1, i; + /* + * Should we try to make guesses for multiport serial devices later? + */ + if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL) + return -ENODEV; + num_iomem = num_port = 0; for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { if (pci_resource_flags(dev, i) & IORESOURCE_IO) { @@ -4699,6 +4703,17 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ pbn_b2_4_115200 }, /* + * BrainBoxes UC-260 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D21, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0E34, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + /* * Perle PCI-RAS cards */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 3682fd3e960c..736720a8d84f 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -498,92 +498,6 @@ config SERIAL_SA1100_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) -config SERIAL_BFIN - tristate "Blackfin serial port support" - depends on BLACKFIN - select SERIAL_CORE - select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) - help - Add support for the built-in UARTs on the Blackfin. - - To compile this driver as a module, choose M here: the - module is named bfin_uart.ko. - -config SERIAL_BFIN_CONSOLE - bool "Console on Blackfin serial port" - depends on SERIAL_BFIN=y - select SERIAL_CORE_CONSOLE - -choice - prompt "UART Mode" - depends on SERIAL_BFIN - default SERIAL_BFIN_DMA - help - This driver supports the built-in serial ports of the Blackfin family - of CPUs - -config SERIAL_BFIN_DMA - bool "DMA mode" - depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n - help - This driver works under DMA mode. If this option is selected, the - blackfin simple dma driver is also enabled. - -config SERIAL_BFIN_PIO - bool "PIO mode" - help - This driver works under PIO mode. - -endchoice - -config SERIAL_BFIN_UART0 - bool "Enable UART0" - depends on SERIAL_BFIN - help - Enable UART0 - -config BFIN_UART0_CTSRTS - bool "Enable UART0 hardware flow control" - depends on SERIAL_BFIN_UART0 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART1 - bool "Enable UART1" - depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) - help - Enable UART1 - -config BFIN_UART1_CTSRTS - bool "Enable UART1 hardware flow control" - depends on SERIAL_BFIN_UART1 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART2 - bool "Enable UART2" - depends on SERIAL_BFIN && (BF54x || BF538 || BF539) - help - Enable UART2 - -config BFIN_UART2_CTSRTS - bool "Enable UART2 hardware flow control" - depends on SERIAL_BFIN_UART2 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART3 - bool "Enable UART3" - depends on SERIAL_BFIN && (BF54x) - help - Enable UART3 - -config BFIN_UART3_CTSRTS - bool "Enable UART3 hardware flow control" - depends on SERIAL_BFIN_UART3 - help - Enable hardware flow control in the driver. - config SERIAL_IMX tristate "IMX serial port support" depends on HAS_DMA @@ -991,35 +905,6 @@ config SERIAL_ICOM This driver can also be built as a module. If so, the module will be called icom. -config SERIAL_M32R_SIO - bool "M32R SIO I/F" - depends on M32R - default y - select SERIAL_CORE - help - Say Y here if you want to use the M32R serial controller. - -config SERIAL_M32R_SIO_CONSOLE - bool "use SIO console" - depends on SERIAL_M32R_SIO=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console. - - If you use an M3T-M32700UT or an OPSPUT platform, - please say also y for SERIAL_M32R_PLDSIO. - -config SERIAL_M32R_PLDSIO - bool "M32R SIO I/F on a PLD" - depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) - default n - help - Say Y here if you want to use the M32R serial controller - on a PLD (Programmable Logic Device). - - If you use an M3T-M32700UT or an OPSPUT platform, - please say Y. - config SERIAL_TXX9 bool "TMPTX39XX/49XX SIO support" depends on HAS_TXX9_SERIAL @@ -1114,17 +999,6 @@ config SERIAL_VT8500_CONSOLE depends on SERIAL_VT8500=y select SERIAL_CORE_CONSOLE -config SERIAL_ETRAXFS - bool "ETRAX FS serial port support" - depends on ETRAX_ARCH_V32 && OF - select SERIAL_CORE - select SERIAL_MCTRL_GPIO if GPIOLIB - -config SERIAL_ETRAXFS_CONSOLE - bool "ETRAX FS serial console support" - depends on SERIAL_ETRAXFS - select SERIAL_CORE_CONSOLE - config SERIAL_NETX tristate "NetX serial port support" depends on ARCH_NETX @@ -1242,69 +1116,6 @@ config SERIAL_SC16IS7XX_SPI This is additional support to exsisting driver. You must select at least one bus for the driver to be built. -config SERIAL_BFIN_SPORT - tristate "Blackfin SPORT emulate UART" - depends on BLACKFIN - select SERIAL_CORE - help - Enable SPORT emulate UART on Blackfin series. - - To compile this driver as a module, choose M here: the - module will be called bfin_sport_uart. - -config SERIAL_BFIN_SPORT_CONSOLE - bool "Console on Blackfin sport emulated uart" - depends on SERIAL_BFIN_SPORT=y - select SERIAL_CORE_CONSOLE - -config SERIAL_BFIN_SPORT0_UART - bool "Enable UART over SPORT0" - depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) - help - Enable UART over SPORT0 - -config SERIAL_BFIN_SPORT0_UART_CTSRTS - bool "Enable UART over SPORT0 hardware flow control" - depends on SERIAL_BFIN_SPORT0_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT1_UART - bool "Enable UART over SPORT1" - depends on SERIAL_BFIN_SPORT - help - Enable UART over SPORT1 - -config SERIAL_BFIN_SPORT1_UART_CTSRTS - bool "Enable UART over SPORT1 hardware flow control" - depends on SERIAL_BFIN_SPORT1_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT2_UART - bool "Enable UART over SPORT2" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT2 - -config SERIAL_BFIN_SPORT2_UART_CTSRTS - bool "Enable UART over SPORT2 hardware flow control" - depends on SERIAL_BFIN_SPORT2_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT3_UART - bool "Enable UART over SPORT3" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT3 - -config SERIAL_BFIN_SPORT3_UART_CTSRTS - bool "Enable UART over SPORT3 hardware flow control" - depends on SERIAL_BFIN_SPORT3_UART - help - Enable hardware flow control in the driver. - config SERIAL_TIMBERDALE tristate "Support for timberdale UART" select SERIAL_CORE @@ -1519,15 +1330,6 @@ config SERIAL_EFM32_UART_CONSOLE depends on SERIAL_EFM32_UART=y select SERIAL_CORE_CONSOLE -config SERIAL_TILEGX - tristate "TILE-Gx on-chip serial port support" - depends on TILEGX - select TILE_GXIO_UART - select SERIAL_CORE - ---help--- - This device provides access to the on-chip UARTs on the TILE-Gx - processor. - config SERIAL_ARC tristate "ARC UART driver support" select SERIAL_CORE diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 842d185d697e..b30ee2e5d518 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -29,8 +29,6 @@ obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o -obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o -obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX310X) += max310x.o @@ -47,12 +45,9 @@ obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ obj-$(CONFIG_SERIAL_IMX) += imx.o obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o obj-$(CONFIG_SERIAL_ICOM) += icom.o -obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o obj-$(CONFIG_SERIAL_MPSC) += mpsc.o obj-$(CONFIG_SERIAL_MESON) += meson_uart.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o -obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o -obj-$(CONFIG_SERIAL_ETRAXFS) += etraxfs-uart.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o obj-$(CONFIG_SERIAL_JSM) += jsm/ @@ -68,7 +63,6 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o -obj-$(CONFIG_SERIAL_TILEGX) += tilegx.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index df46a9e88c34..e287fe8f10fc 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1734,6 +1734,7 @@ static void atmel_get_ip_name(struct uart_port *port) switch (version) { case 0x302: case 0x10213: + case 0x10302: dev_dbg(port->dev, "This version is usart\n"); atmel_port->has_frac_baudrate = true; atmel_port->has_hw_timer = true; diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c deleted file mode 100644 index 4ccca5d22f4f..000000000000 --- a/drivers/tty/serial/bfin_sport_uart.c +++ /dev/null @@ -1,937 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Blackfin On-Chip Sport Emulated UART Driver - * - * Copyright 2006-2009 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - */ - -/* - * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/static/imported-files/application_notes/EE191.pdf - * This application note describe how to implement a UART on a Sharc DSP, - * but this driver is implemented on Blackfin Processor. - * Transmit Frame Sync is not used by this driver to transfer data out. - */ - -/* #define DEBUG */ - -#define DRV_NAME "bfin-sport-uart" -#define DEVICE_NAME "ttySS" -#define pr_fmt(fmt) DRV_NAME ": " fmt - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/gpio.h> - -#include <asm/bfin_sport.h> -#include <asm/delay.h> -#include <asm/portmux.h> - -#include "bfin_sport_uart.h" - -struct sport_uart_port { - struct uart_port port; - int err_irq; - unsigned short csize; - unsigned short rxmask; - unsigned short txmask1; - unsigned short txmask2; - unsigned char stopb; -/* unsigned char parib; */ -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - int cts_pin; - int rts_pin; -#endif -}; - -static int sport_uart_tx_chars(struct sport_uart_port *up); -static void sport_stop_tx(struct uart_port *port); - -static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) -{ - pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, - up->txmask1, up->txmask2); - - /* Place Start and Stop bits */ - __asm__ __volatile__ ( - "%[val] <<= 1;" - "%[val] = %[val] & %[mask1];" - "%[val] = %[val] | %[mask2];" - : [val]"+d"(value) - : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) - : "ASTAT" - ); - pr_debug("%s value:%x\n", __func__, value); - - SPORT_PUT_TX(up, value); -} - -static inline unsigned char rx_one_byte(struct sport_uart_port *up) -{ - unsigned int value; - unsigned char extract; - u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; - - if ((up->csize + up->stopb) > 7) - value = SPORT_GET_RX32(up); - else - value = SPORT_GET_RX(up); - - pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, - up->csize, up->rxmask); - - /* Extract data */ - __asm__ __volatile__ ( - "%[extr] = 0;" - "%[mask1] = %[rxmask];" - "%[mask2] = 0x0200(Z);" - "%[shift] = 0;" - "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" - ".Lloop_s:" - "%[tmp] = extract(%[val], %[mask1].L)(Z);" - "%[tmp] <<= %[shift];" - "%[extr] = %[extr] | %[tmp];" - "%[mask1] = %[mask1] - %[mask2];" - ".Lloop_e:" - "%[shift] += 1;" - : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), - [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) - : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) - : "ASTAT", "LB0", "LC0", "LT0" - ); - - pr_debug(" extract:%x\n", extract); - return extract; -} - -static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) -{ - int tclkdiv, rclkdiv; - unsigned int sclk = get_sclk(); - - /* Set TCR1 and TCR2, TFSR is not enabled for uart */ - SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); - SPORT_PUT_TCR2(up, size + 1); - pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); - - /* Set RCR1 and RCR2 */ - SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); - SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); - pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); - - tclkdiv = sclk / (2 * baud_rate) - 1; - /* The actual uart baud rate of devices vary between +/-2%. The sport - * RX sample rate should be faster than the double of the worst case, - * otherwise, wrong data are received. So, set sport RX clock to be - * 3% faster. - */ - rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1; - SPORT_PUT_TCLKDIV(up, tclkdiv); - SPORT_PUT_RCLKDIV(up, rclkdiv); - SSYNC(); - pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", - __func__, sclk, baud_rate, tclkdiv, rclkdiv); - - return 0; -} - -static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - struct tty_port *port = &up->port.state->port; - unsigned int ch; - - spin_lock(&up->port.lock); - - while (SPORT_GET_STAT(up) & RXNE) { - ch = rx_one_byte(up); - up->port.icount.rx++; - - if (!uart_handle_sysrq_char(&up->port, ch)) - tty_insert_flip_char(port, ch, TTY_NORMAL); - } - - spin_unlock(&up->port.lock); - - /* XXX this won't deadlock with lowlat? */ - tty_flip_buffer_push(port); - - return IRQ_HANDLED; -} - -static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - - spin_lock(&up->port.lock); - sport_uart_tx_chars(up); - spin_unlock(&up->port.lock); - - return IRQ_HANDLED; -} - -static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - unsigned int stat = SPORT_GET_STAT(up); - - spin_lock(&up->port.lock); - - /* Overflow in RX FIFO */ - if (stat & ROVF) { - up->port.icount.overrun++; - tty_insert_flip_char(&up->port.state->port, 0, TTY_OVERRUN); - SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */ - } - /* These should not happen */ - if (stat & (TOVF | TUVF | RUVF)) { - pr_err("SPORT Error:%s %s %s\n", - (stat & TOVF) ? "TX overflow" : "", - (stat & TUVF) ? "TX underflow" : "", - (stat & RUVF) ? "RX underflow" : ""); - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); - } - SSYNC(); - - spin_unlock(&up->port.lock); - /* XXX we don't push the overrun bit to TTY? */ - - return IRQ_HANDLED; -} - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS -static unsigned int sport_get_mctrl(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - if (up->cts_pin < 0) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - /* CTS PIN is negative assertive. */ - if (SPORT_UART_GET_CTS(up)) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - if (up->rts_pin < 0) - return; - - /* RTS PIN is negative assertive. */ - if (mctrl & TIOCM_RTS) - SPORT_UART_ENABLE_RTS(up); - else - SPORT_UART_DISABLE_RTS(up); -} - -/* - * Handle any change of modem status signal. - */ -static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id) -{ - struct sport_uart_port *up = (struct sport_uart_port *)dev_id; - unsigned int status; - - status = sport_get_mctrl(&up->port); - uart_handle_cts_change(&up->port, status & TIOCM_CTS); - - return IRQ_HANDLED; -} -#else -static unsigned int sport_get_mctrl(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); - return TIOCM_CTS | TIOCM_CD | TIOCM_DSR; -} - -static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - pr_debug("%s enter\n", __func__); -} -#endif - -/* Reqeust IRQ, Setup clock */ -static int sport_startup(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - int ret; - - pr_debug("%s enter\n", __func__); - ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, - "SPORT_UART_RX", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT RX interrupt\n"); - return ret; - } - - ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, - "SPORT_UART_TX", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT TX interrupt\n"); - goto fail1; - } - - ret = request_irq(up->err_irq, sport_uart_err_irq, 0, - "SPORT_UART_STATUS", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT status interrupt\n"); - goto fail2; - } - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - if (up->cts_pin >= 0) { - if (request_irq(gpio_to_irq(up->cts_pin), - sport_mctrl_cts_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | - 0, "BFIN_SPORT_UART_CTS", up)) { - up->cts_pin = -1; - dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n"); - } - } - if (up->rts_pin >= 0) { - if (gpio_request(up->rts_pin, DRV_NAME)) { - dev_info(port->dev, "fail to request RTS PIN at GPIO_%d\n", up->rts_pin); - up->rts_pin = -1; - } else - gpio_direction_output(up->rts_pin, 0); - } -#endif - - return 0; - fail2: - free_irq(up->port.irq+1, up); - fail1: - free_irq(up->port.irq, up); - - return ret; -} - -/* - * sport_uart_tx_chars - * - * ret 1 means need to enable sport. - * ret 0 means do nothing. - */ -static int sport_uart_tx_chars(struct sport_uart_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - - if (SPORT_GET_STAT(up) & TXF) - return 0; - - if (up->port.x_char) { - tx_one_byte(up, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - /* The waiting loop to stop SPORT TX from TX interrupt is - * too long. This may block SPORT RX interrupts and cause - * RX FIFO overflow. So, do stop sport TX only after the last - * char in TX FIFO is moved into the shift register. - */ - if (SPORT_GET_STAT(up) & TXHRE) - sport_stop_tx(&up->port); - return 0; - } - - while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) { - tx_one_byte(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); - up->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - return 1; -} - -static unsigned int sport_tx_empty(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned int stat; - - stat = SPORT_GET_STAT(up); - pr_debug("%s stat:%04x\n", __func__, stat); - if (stat & TXHRE) { - return TIOCSER_TEMT; - } else - return 0; -} - -static void sport_stop_tx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - - if (!(SPORT_GET_TCR1(up) & TSPEN)) - return; - - /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. So, put a dummy data into TX FIFO. - * Then, sport tx stops when last byte is shift out and the dummy - * data is moved into the shift register. - */ - SPORT_PUT_TX(up, 0xffff); - while (!(SPORT_GET_STAT(up) & TXHRE)) - cpu_relax(); - - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SSYNC(); - - return; -} - -static void sport_start_tx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - - /* Write data into SPORT FIFO before enable SPROT to transmit */ - if (sport_uart_tx_chars(up)) { - /* Enable transmit, then an interrupt will generated */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - } - - pr_debug("%s exit\n", __func__); -} - -static void sport_stop_rx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - /* Disable sport to stop rx */ - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); - SSYNC(); -} - -static void sport_break_ctl(struct uart_port *port, int break_state) -{ - pr_debug("%s enter\n", __func__); -} - -static void sport_shutdown(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - dev_dbg(port->dev, "%s enter\n", __func__); - - /* Disable sport */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); - SSYNC(); - - free_irq(up->port.irq, up); - free_irq(up->port.irq+1, up); - free_irq(up->err_irq, up); -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - if (up->cts_pin >= 0) - free_irq(gpio_to_irq(up->cts_pin), up); - if (up->rts_pin >= 0) - gpio_free(up->rts_pin); -#endif -} - -static const char *sport_type(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; -} - -static void sport_release_port(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); -} - -static int sport_request_port(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); - return 0; -} - -static void sport_config_port(struct uart_port *port, int flags) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - up->port.type = PORT_BFIN_SPORT; -} - -static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - pr_debug("%s enter\n", __func__); - return 0; -} - -static void sport_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned long flags; - int i; - - pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - if (old == NULL && up->cts_pin != -1) - termios->c_cflag |= CRTSCTS; - else if (up->cts_pin == -1) - termios->c_cflag &= ~CRTSCTS; -#endif - - switch (termios->c_cflag & CSIZE) { - case CS8: - up->csize = 8; - break; - case CS7: - up->csize = 7; - break; - case CS6: - up->csize = 6; - break; - case CS5: - up->csize = 5; - break; - default: - pr_warn("requested word length not supported\n"); - break; - } - - if (termios->c_cflag & CSTOPB) { - up->stopb = 1; - } - if (termios->c_cflag & PARENB) { - pr_warn("PAREN bit is not supported yet\n"); - /* up->parib = 1; */ - } - - spin_lock_irqsave(&up->port.lock, flags); - - port->read_status_mask = 0; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - - /* RX extract mask */ - up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); - /* TX masks, 8 bit data and 1 bit stop for example: - * mask1 = b#0111111110 - * mask2 = b#1000000000 - */ - for (i = 0, up->txmask1 = 0; i < up->csize; i++) - up->txmask1 |= (1<<i); - up->txmask2 = (1<<i); - if (up->stopb) { - ++i; - up->txmask2 |= (1<<i); - } - up->txmask1 <<= 1; - up->txmask2 <<= 1; - /* uart baud rate */ - port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); - - /* Disable UART */ - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); - - sport_uart_setup(up, up->csize + up->stopb, port->uartclk); - - /* driver TX line high after config, one dummy data is - * necessary to stop sport after shift one byte - */ - SPORT_PUT_TX(up, 0xffff); - SPORT_PUT_TX(up, 0xffff); - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - while (!(SPORT_GET_STAT(up) & TXHRE)) - cpu_relax(); - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SSYNC(); - - /* Port speed changed, update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, port->uartclk); - - /* Enable sport rx */ - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); - SSYNC(); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const struct uart_ops sport_uart_ops = { - .tx_empty = sport_tx_empty, - .set_mctrl = sport_set_mctrl, - .get_mctrl = sport_get_mctrl, - .stop_tx = sport_stop_tx, - .start_tx = sport_start_tx, - .stop_rx = sport_stop_rx, - .break_ctl = sport_break_ctl, - .startup = sport_startup, - .shutdown = sport_shutdown, - .set_termios = sport_set_termios, - .type = sport_type, - .release_port = sport_release_port, - .request_port = sport_request_port, - .config_port = sport_config_port, - .verify_port = sport_verify_port, -}; - -#define BFIN_SPORT_UART_MAX_PORTS 4 - -static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE -#define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console" - -static int __init -sport_uart_console_setup(struct console *co, char *options) -{ - struct sport_uart_port *up; - int baud = 57600; - int bits = 8; - int parity = 'n'; -# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - int flow = 'r'; -# else - int flow = 'n'; -# endif - - /* Check whether an invalid uart number has been specified */ - if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) - return -ENODEV; - - up = bfin_sport_uart_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static void sport_uart_console_putchar(struct uart_port *port, int ch) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - while (SPORT_GET_STAT(up) & TXF) - barrier(); - - tx_one_byte(up, ch); -} - -/* - * Interrupts are disabled on entering - */ -static void -sport_uart_console_write(struct console *co, const char *s, unsigned int count) -{ - struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - if (SPORT_GET_TCR1(up) & TSPEN) - uart_console_write(&up->port, s, count, sport_uart_console_putchar); - else { - /* dummy data to start sport */ - while (SPORT_GET_STAT(up) & TXF) - barrier(); - SPORT_PUT_TX(up, 0xffff); - /* Enable transmit, then an interrupt will generated */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - - uart_console_write(&up->port, s, count, sport_uart_console_putchar); - - /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. So, put a dummy data into TX FIFO. - * Then, sport tx stops when last byte is shift out and the dummy - * data is moved into the shift register. - */ - while (SPORT_GET_STAT(up) & TXF) - barrier(); - SPORT_PUT_TX(up, 0xffff); - while (!(SPORT_GET_STAT(up) & TXHRE)) - barrier(); - - /* Stop sport tx transfer */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SSYNC(); - } - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver sport_uart_reg; - -static struct console sport_uart_console = { - .name = DEVICE_NAME, - .write = sport_uart_console_write, - .device = uart_console_device, - .setup = sport_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sport_uart_reg, -}; - -#define SPORT_UART_CONSOLE (&sport_uart_console) -#else -#define SPORT_UART_CONSOLE NULL -#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ - - -static struct uart_driver sport_uart_reg = { - .owner = THIS_MODULE, - .driver_name = DRV_NAME, - .dev_name = DEVICE_NAME, - .major = 204, - .minor = 84, - .nr = BFIN_SPORT_UART_MAX_PORTS, - .cons = SPORT_UART_CONSOLE, -}; - -#ifdef CONFIG_PM -static int sport_uart_suspend(struct device *dev) -{ - struct sport_uart_port *sport = dev_get_drvdata(dev); - - dev_dbg(dev, "%s enter\n", __func__); - if (sport) - uart_suspend_port(&sport_uart_reg, &sport->port); - - return 0; -} - -static int sport_uart_resume(struct device *dev) -{ - struct sport_uart_port *sport = dev_get_drvdata(dev); - - dev_dbg(dev, "%s enter\n", __func__); - if (sport) - uart_resume_port(&sport_uart_reg, &sport->port); - - return 0; -} - -static const struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { - .suspend = sport_uart_suspend, - .resume = sport_uart_resume, -}; -#endif - -static int sport_uart_probe(struct platform_device *pdev) -{ - struct resource *res; - struct sport_uart_port *sport; - int ret = 0; - - dev_dbg(&pdev->dev, "%s enter\n", __func__); - - if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { - dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); - return -ENOENT; - } - - if (bfin_sport_uart_ports[pdev->id] == NULL) { - bfin_sport_uart_ports[pdev->id] = - kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL); - sport = bfin_sport_uart_ports[pdev->id]; - if (!sport) { - dev_err(&pdev->dev, - "Fail to malloc sport_uart_port\n"); - return -ENOMEM; - } - - ret = peripheral_request_list(dev_get_platdata(&pdev->dev), - DRV_NAME); - if (ret) { - dev_err(&pdev->dev, - "Fail to request SPORT peripherals\n"); - goto out_error_free_mem; - } - - spin_lock_init(&sport->port.lock); - sport->port.fifosize = SPORT_TX_FIFO_SIZE, - sport->port.ops = &sport_uart_ops; - sport->port.line = pdev->id; - sport->port.iotype = UPIO_MEM; - sport->port.flags = UPF_BOOT_AUTOCONF; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - sport->port.membase = ioremap(res->start, resource_size(res)); - if (!sport->port.membase) { - dev_err(&pdev->dev, "Cannot map sport IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - sport->port.mapbase = res->start; - - sport->port.irq = platform_get_irq(pdev, 0); - if ((int)sport->port.irq < 0) { - dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - - sport->err_irq = platform_get_irq(pdev, 1); - if (sport->err_irq < 0) { - dev_err(&pdev->dev, "No sport status IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) - sport->cts_pin = -1; - else - sport->cts_pin = res->start; - - res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (res == NULL) - sport->rts_pin = -1; - else - sport->rts_pin = res->start; -#endif - } - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE - if (!is_early_platform_device(pdev)) { -#endif - sport = bfin_sport_uart_ports[pdev->id]; - sport->port.dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, sport); - ret = uart_add_one_port(&sport_uart_reg, &sport->port); -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE - } -#endif - if (!ret) - return 0; - - if (sport) { -out_error_unmap: - iounmap(sport->port.membase); -out_error_free_peripherals: - peripheral_free_list(dev_get_platdata(&pdev->dev)); -out_error_free_mem: - kfree(sport); - bfin_sport_uart_ports[pdev->id] = NULL; - } - - return ret; -} - -static int sport_uart_remove(struct platform_device *pdev) -{ - struct sport_uart_port *sport = platform_get_drvdata(pdev); - - dev_dbg(&pdev->dev, "%s enter\n", __func__); - dev_set_drvdata(&pdev->dev, NULL); - - if (sport) { - uart_remove_one_port(&sport_uart_reg, &sport->port); - iounmap(sport->port.membase); - peripheral_free_list(dev_get_platdata(&pdev->dev)); - kfree(sport); - bfin_sport_uart_ports[pdev->id] = NULL; - } - - return 0; -} - -static struct platform_driver sport_uart_driver = { - .probe = sport_uart_probe, - .remove = sport_uart_remove, - .driver = { - .name = DRV_NAME, -#ifdef CONFIG_PM - .pm = &bfin_sport_uart_dev_pm_ops, -#endif - }, -}; - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE -static struct early_platform_driver early_sport_uart_driver __initdata = { - .class_str = CLASS_BFIN_SPORT_CONSOLE, - .pdrv = &sport_uart_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -static int __init sport_uart_rs_console_init(void) -{ - early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); - - early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE, - BFIN_SPORT_UART_MAX_PORTS, 0); - - register_console(&sport_uart_console); - - return 0; -} -console_initcall(sport_uart_rs_console_init); -#endif - -static int __init sport_uart_init(void) -{ - int ret; - - pr_info("Blackfin uart over sport driver\n"); - - ret = uart_register_driver(&sport_uart_reg); - if (ret) { - pr_err("failed to register %s:%d\n", - sport_uart_reg.driver_name, ret); - return ret; - } - - ret = platform_driver_register(&sport_uart_driver); - if (ret) { - pr_err("failed to register sport uart driver:%d\n", ret); - uart_unregister_driver(&sport_uart_reg); - } - - return ret; -} -module_init(sport_uart_init); - -static void __exit sport_uart_exit(void) -{ - platform_driver_unregister(&sport_uart_driver); - uart_unregister_driver(&sport_uart_reg); -} -module_exit(sport_uart_exit); - -MODULE_AUTHOR("Sonic Zhang, Roy Huang"); -MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h deleted file mode 100644 index 4b12f45d6580..000000000000 --- a/drivers/tty/serial/bfin_sport_uart.h +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Blackfin On-Chip Sport Emulated UART Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - */ - -/* - * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/static/imported-files/application_notes/EE191.pdf - * This application note describe how to implement a UART on a Sharc DSP, - * but this driver is implemented on Blackfin Processor. - * Transmit Frame Sync is not used by this driver to transfer data out. - */ - -#ifndef _BFIN_SPORT_UART_H -#define _BFIN_SPORT_UART_H - -#define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ -#define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ -#define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */ -#define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */ -#define OFFSET_TX 0x10 /* Transmit Data Register */ -#define OFFSET_RX 0x18 /* Receive Data Register */ -#define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */ -#define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */ -#define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */ -#define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */ -#define OFFSET_STAT 0x30 /* Status Register */ - -#define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1)) -#define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2)) -#define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV)) -#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV)) -#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX)) -#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX)) -/* - * If another interrupt fires while doing a 32-bit read from RX FIFO, - * a fake RX underflow error will be generated. So disable interrupts - * to prevent interruption while reading the FIFO. - */ -#define SPORT_GET_RX32(sport) \ -({ \ - unsigned int __ret; \ - unsigned long flags; \ - if (ANOMALY_05000473) \ - local_irq_save(flags); \ - __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \ - if (ANOMALY_05000473) \ - local_irq_restore(flags); \ - __ret; \ -}) -#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1)) -#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2)) -#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV)) -#define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV)) -#define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT)) - -#define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v) -#define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v) -#define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v) -#define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v) -#define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v) -#define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v) -#define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v) -#define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v) -#define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) -#define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) -#define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) - -#define SPORT_TX_FIFO_SIZE 8 - -#define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) -#define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) - -#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS) -# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS -#endif - -#endif /* _BFIN_SPORT_UART_H */ diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c deleted file mode 100644 index 4755fa696321..000000000000 --- a/drivers/tty/serial/bfin_uart.c +++ /dev/null @@ -1,1551 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Blackfin On-Chip Serial Driver - * - * Copyright 2006-2011 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - */ - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#define DRIVER_NAME "bfin-uart" -#define pr_fmt(fmt) DRIVER_NAME ": " fmt - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/gfp.h> -#include <linux/io.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/platform_device.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/kgdb.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> - -#include <asm/portmux.h> -#include <asm/cacheflush.h> -#include <asm/dma.h> -#include <asm/bfin_serial.h> - -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - -/* UART name and device definitions */ -#define BFIN_SERIAL_DEV_NAME "ttyBF" -#define BFIN_SERIAL_MAJOR 204 -#define BFIN_SERIAL_MINOR 64 - -static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - -# ifndef CONFIG_SERIAL_BFIN_PIO -# error KGDB only support UART in PIO mode. -# endif - -static int kgdboc_port_line; -static int kgdboc_break_enabled; -#endif -/* - * Setup for console. Argument comes from the menuconfig - */ -#define DMA_RX_XCOUNT 512 -#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) - -#define DMA_RX_FLUSH_JIFFIES (HZ / 50) - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); -#else -static void bfin_serial_tx_chars(struct bfin_serial_port *uart); -#endif - -static void bfin_serial_reset_irda(struct uart_port *port); - -#if defined(SERIAL_BFIN_CTSRTS) || \ - defined(SERIAL_BFIN_HARD_CTSRTS) -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->cts_pin < 0) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - /* CTS PIN is negative assertive. */ - if (UART_GET_CTS(uart)) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->rts_pin < 0) - return; - - /* RTS PIN is negative assertive. */ - if (mctrl & TIOCM_RTS) - UART_ENABLE_RTS(uart); - else - UART_DISABLE_RTS(uart); -} - -/* - * Handle any change of modem status signal. - */ -static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - struct uart_port *uport = &uart->port; - unsigned int status = bfin_serial_get_mctrl(uport); -#ifdef SERIAL_BFIN_HARD_CTSRTS - - UART_CLEAR_SCTS(uart); - if (uport->hw_stopped) { - if (status) { - uport->hw_stopped = 0; - uart_write_wakeup(uport); - } - } else { - if (!status) - uport->hw_stopped = 1; - } -#else - uart_handle_cts_change(uport, status & TIOCM_CTS); -#endif - - return IRQ_HANDLED; -} -#else -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} -#endif - -/* - * interrupts are disabled on entry - */ -static void bfin_serial_stop_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_SERIAL_BFIN_DMA - struct circ_buf *xmit = &uart->port.state->xmit; -#endif - - while (!(UART_GET_LSR(uart) & TEMT)) - cpu_relax(); - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - uart->tx_count = 0; - uart->tx_done = 1; -#else -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - UART_CLEAR_IER(uart, ETBEI); -#endif -} - -/* - * port is locked and interrupts are disabled - */ -static void bfin_serial_start_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - struct tty_struct *tty = uart->port.state->port.tty; - - /* - * To avoid losting RX interrupt, we reset IR function - * before sending data. - */ - if (tty->termios.c_line == N_IRDA) - bfin_serial_reset_irda(port); - -#ifdef CONFIG_SERIAL_BFIN_DMA - if (uart->tx_done) - bfin_serial_dma_tx_chars(uart); -#else - UART_SET_IER(uart, ETBEI); - bfin_serial_tx_chars(uart); -#endif -} - -/* - * Interrupts are enabled - */ -static void bfin_serial_stop_rx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - UART_CLEAR_IER(uart, ERBFI); -} - -#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) -# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) -# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) -#else -# define UART_GET_ANOMALY_THRESHOLD(uart) 0 -# define UART_SET_ANOMALY_THRESHOLD(uart, v) -#endif - -#ifdef CONFIG_SERIAL_BFIN_PIO -static void bfin_serial_rx_chars(struct bfin_serial_port *uart) -{ - unsigned int status, ch, flg; - static u64 anomaly_start; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - ch = UART_GET_CHAR(uart); - uart->port.icount.rx++; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdb_connected && kgdboc_port_line == uart->port.line - && kgdboc_break_enabled) - if (ch == 0x3) {/* Ctrl + C */ - kgdb_breakpoint(); - return; - } - - if (!uart->port.state) - return; -#endif - if (ANOMALY_05000363) { - /* The BF533 (and BF561) family of processors have a nice anomaly - * where they continuously generate characters for a "single" break. - * We have to basically ignore this flood until the "next" valid - * character comes across. Due to the nature of the flood, it is - * not possible to reliably catch bytes that are sent too quickly - * after this break. So application code talking to the Blackfin - * which sends a break signal must allow at least 1.5 character - * times after the end of the break for things to stabilize. This - * timeout was picked as it must absolutely be larger than 1 - * character time +/- some percent. So 1.5 sounds good. All other - * Blackfin families operate properly. Woo. - */ - if (anomaly_start > 0) { - u64 curr, nsecs, threshold_ns; - - if ((~ch & (~ch + 1)) & 0xff) - goto known_good_char; - - curr = ktime_get_ns(); - nsecs = curr - anomaly_start; - if (nsecs >> 32) - goto known_good_char; - - threshold_ns = UART_GET_ANOMALY_THRESHOLD(uart) - * NSEC_PER_USEC; - if (nsecs > threshold_ns) - goto known_good_char; - - if (ch) - anomaly_start = 0; - else - anomaly_start = curr; - - return; - - known_good_char: - status &= ~BI; - anomaly_start = 0; - } - } - - if (status & BI) { - if (ANOMALY_05000363) - if (bfin_revid() < 5) - anomaly_start = ktime_get_ns(); - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - if (uart_handle_sysrq_char(&uart->port, ch)) - goto ignore_char; - - uart_insert_char(&uart->port, status, OE, ch, flg); - - ignore_char: - tty_flip_buffer_push(&uart->port.state->port); -} - -static void bfin_serial_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { - UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); -} - -static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - - while (UART_GET_LSR(uart) & DR) - bfin_serial_rx_chars(uart); - - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - - spin_lock(&uart->port.lock); - if (UART_GET_LSR(uart) & THRE) - bfin_serial_tx_chars(uart); - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} -#endif - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - uart->tx_done = 0; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - uart->tx_count = 0; - uart->tx_done = 1; - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) - uart->tx_count = UART_XMIT_SIZE - xmit->tail; - blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), - (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); - set_dma_config(uart->tx_dma_channel, - set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, - INTR_ON_BUF, - DIMENSION_LINEAR, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); - set_dma_x_count(uart->tx_dma_channel, uart->tx_count); - set_dma_x_modify(uart->tx_dma_channel, 1); - SSYNC(); - enable_dma(uart->tx_dma_channel); - - UART_SET_IER(uart, ETBEI); -} - -static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) -{ - int i, flg, status; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - uart->port.icount.rx += - CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, - UART_XMIT_SIZE); - - if (status & BI) { - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto dma_ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - for (i = uart->rx_dma_buf.tail; ; i++) { - if (i >= UART_XMIT_SIZE) - i = 0; - if (i == uart->rx_dma_buf.head) - break; - if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) - uart_insert_char(&uart->port, status, OE, - uart->rx_dma_buf.buf[i], flg); - } - - dma_ignore_char: - tty_flip_buffer_push(&uart->port.state->port); -} - -void bfin_serial_rx_dma_timeout(struct timer_list *t) -{ - struct bfin_serial_port *uart = from_timer(uart, t, rx_dma_timer); - int x_pos, pos; - unsigned long flags; - - dma_disable_irq_nosync(uart->rx_dma_channel); - spin_lock_irqsave(&uart->rx_lock, flags); - - /* 2D DMA RX buffer ring is used. Because curr_y_count and - * curr_x_count can't be read as an atomic operation, - * curr_y_count should be read before curr_x_count. When - * curr_x_count is read, curr_y_count may already indicate - * next buffer line. But, the position calculated here is - * still indicate the old line. The wrong position data may - * be smaller than current buffer tail, which cause garbages - * are received if it is not prohibit. - */ - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - x_pos = DMA_RX_XCOUNT - x_pos; - if (x_pos == DMA_RX_XCOUNT) - x_pos = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - /* Ignore receiving data if new position is in the same line of - * current buffer tail and small. - */ - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock_irqrestore(&uart->rx_lock, flags); - dma_enable_irq(uart->rx_dma_channel); - - mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); -} - -static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - struct circ_buf *xmit = &uart->port.state->xmit; - - spin_lock(&uart->port.lock); - if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { - disable_dma(uart->tx_dma_channel); - clear_dma_irqstat(uart->tx_dma_channel); - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - uart->port.icount.tx += uart->tx_count; - if (!(xmit->tail == 0 && xmit->head == 0)) { - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); - } - - bfin_serial_dma_tx_chars(uart); - } - - spin_unlock(&uart->port.lock); - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - unsigned int irqstat; - int x_pos, pos; - - spin_lock(&uart->rx_lock); - irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); - clear_dma_irqstat(uart->rx_dma_channel); - - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock(&uart->rx_lock); - - return IRQ_HANDLED; -} -#endif - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int bfin_serial_tx_empty(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned int lsr; - - lsr = UART_GET_LSR(uart); - if (lsr & TEMT) - return TIOCSER_TEMT; - else - return 0; -} - -static void bfin_serial_break_ctl(struct uart_port *port, int break_state) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - u32 lcr = UART_GET_LCR(uart); - if (break_state) - lcr |= SB; - else - lcr &= ~SB; - UART_PUT_LCR(uart, lcr); - SSYNC(); -} - -static int bfin_serial_startup(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - dma_addr_t dma_handle; - - if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); - return -EBUSY; - } - - if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); - free_dma(uart->rx_dma_channel); - return -EBUSY; - } - - set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); - set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); - - uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); - uart->rx_dma_buf.head = 0; - uart->rx_dma_buf.tail = 0; - uart->rx_dma_nrows = 0; - - set_dma_config(uart->rx_dma_channel, - set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, - INTR_ON_ROW, DIMENSION_2D, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); - set_dma_x_modify(uart->rx_dma_channel, 1); - set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); - set_dma_y_modify(uart->rx_dma_channel, 1); - set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); - enable_dma(uart->rx_dma_channel); - - uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; - add_timer(&(uart->rx_dma_timer)); -#else -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) - kgdboc_break_enabled = 0; - else { -# endif - if (request_irq(uart->rx_irq, bfin_serial_rx_int, 0, - "BFIN_UART_RX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); - return -EBUSY; - } - - if (request_irq - (uart->tx_irq, bfin_serial_tx_int, 0, - "BFIN_UART_TX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); - free_irq(uart->rx_irq, uart); - return -EBUSY; - } - -# ifdef CONFIG_BF54x - { - /* - * UART2 and UART3 on BF548 share interrupt PINs and DMA - * controllers with SPORT2 and SPORT3. UART rx and tx - * interrupts are generated in PIO mode only when configure - * their peripheral mapping registers properly, which means - * request corresponding DMA channels in PIO mode as well. - */ - unsigned uart_dma_ch_rx, uart_dma_ch_tx; - - switch (uart->rx_irq) { - case IRQ_UART3_RX: - uart_dma_ch_rx = CH_UART3_RX; - uart_dma_ch_tx = CH_UART3_TX; - break; - case IRQ_UART2_RX: - uart_dma_ch_rx = CH_UART2_RX; - uart_dma_ch_tx = CH_UART2_TX; - break; - default: - uart_dma_ch_rx = uart_dma_ch_tx = 0; - break; - } - - if (uart_dma_ch_rx && - request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE"Fail to attach UART interrupt\n"); - free_irq(uart->rx_irq, uart); - free_irq(uart->tx_irq, uart); - return -EBUSY; - } - if (uart_dma_ch_tx && - request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Fail to attach UART interrupt\n"); - free_dma(uart_dma_ch_rx); - free_irq(uart->rx_irq, uart); - free_irq(uart->tx_irq, uart); - return -EBUSY; - } - } -# endif -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - } -# endif -#endif - -#ifdef SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - if (request_irq(gpio_to_irq(uart->cts_pin), - bfin_serial_mctrl_cts_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | - 0, "BFIN_UART_CTS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); - } - } - if (uart->rts_pin >= 0) { - if (gpio_request(uart->rts_pin, DRIVER_NAME)) { - pr_info("fail to request RTS PIN at GPIO_%d\n", uart->rts_pin); - uart->rts_pin = -1; - } else - gpio_direction_output(uart->rts_pin, 0); - } -#endif -#ifdef SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0) { - if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int, - 0, "BFIN_UART_MODEM_STATUS", uart)) { - uart->cts_pin = -1; - dev_info(port->dev, "Unable to attach BlackFin UART Modem Status interrupt.\n"); - } - - /* CTS RTS PINs are negative assertive. */ - UART_PUT_MCR(uart, UART_GET_MCR(uart) | ACTS); - UART_SET_IER(uart, EDSSI); - } -#endif - - UART_SET_IER(uart, ERBFI); - return 0; -} - -static void bfin_serial_shutdown(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - free_dma(uart->tx_dma_channel); - disable_dma(uart->rx_dma_channel); - free_dma(uart->rx_dma_channel); - del_timer(&(uart->rx_dma_timer)); - dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); -#else -#ifdef CONFIG_BF54x - switch (uart->port.irq) { - case IRQ_UART3_RX: - free_dma(CH_UART3_RX); - free_dma(CH_UART3_TX); - break; - case IRQ_UART2_RX: - free_dma(CH_UART2_RX); - free_dma(CH_UART2_TX); - break; - default: - break; - } -#endif - free_irq(uart->rx_irq, uart); - free_irq(uart->tx_irq, uart); -#endif - -#ifdef SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) - free_irq(gpio_to_irq(uart->cts_pin), uart); - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); -#endif -#ifdef SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0) - free_irq(uart->status_irq, uart); -#endif -} - -static void -bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned long flags; - unsigned int baud, quot; - unsigned int ier, lcr = 0; - unsigned long timeout; - -#ifdef SERIAL_BFIN_CTSRTS - if (old == NULL && uart->cts_pin != -1) - termios->c_cflag |= CRTSCTS; - else if (uart->cts_pin == -1) - termios->c_cflag &= ~CRTSCTS; -#endif - - switch (termios->c_cflag & CSIZE) { - case CS8: - lcr = WLS(8); - break; - case CS7: - lcr = WLS(7); - break; - case CS6: - lcr = WLS(6); - break; - case CS5: - lcr = WLS(5); - break; - default: - printk(KERN_ERR "%s: word length not supported\n", - __func__); - } - - /* Anomaly notes: - * 05000231 - STOP bit is always set to 1 whatever the user is set. - */ - if (termios->c_cflag & CSTOPB) { - if (ANOMALY_05000231) - printk(KERN_WARNING "STOP bits other than 1 is not " - "supported in case of anomaly 05000231.\n"); - else - lcr |= STB; - } - if (termios->c_cflag & PARENB) - lcr |= PEN; - if (!(termios->c_cflag & PARODD)) - lcr |= EPS; - if (termios->c_cflag & CMSPAR) - lcr |= STP; - - spin_lock_irqsave(&uart->port.lock, flags); - - port->read_status_mask = OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (FE | PE); - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - port->read_status_mask |= BI; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= FE | PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= OE; - } - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - /* If discipline is not IRDA, apply ANOMALY_05000230 */ - if (termios->c_line != N_IRDA) - quot -= ANOMALY_05000230; - - UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); - - /* Wait till the transfer buffer is empty */ - timeout = jiffies + msecs_to_jiffies(10); - while (UART_GET_GCTL(uart) & UCEN && !(UART_GET_LSR(uart) & TEMT)) - if (time_after(jiffies, timeout)) { - dev_warn(port->dev, "timeout waiting for TX buffer empty\n"); - break; - } - - /* Disable UART */ - ier = UART_GET_IER(uart); - UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN); - UART_DISABLE_INTS(uart); - - /* Set DLAB in LCR to Access CLK */ - UART_SET_DLAB(uart); - - UART_PUT_CLK(uart, quot); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - UART_PUT_LCR(uart, (UART_GET_LCR(uart) & ~LCR_MASK) | lcr); - - /* Enable UART */ - UART_ENABLE_INTS(uart, ier); - UART_PUT_GCTL(uart, UART_GET_GCTL(uart) | UCEN); - - /* Port speed changed, update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&uart->port.lock, flags); -} - -static const char *bfin_serial_type(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void bfin_serial_release_port(struct uart_port *port) -{ -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int bfin_serial_request_port(struct uart_port *port) -{ - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void bfin_serial_config_port(struct uart_port *port, int flags) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - if (flags & UART_CONFIG_TYPE && - bfin_serial_request_port(&uart->port) == 0) - uart->port.type = PORT_BFIN; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_BFIN and PORT_UNKNOWN - */ -static int -bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return 0; -} - -/* - * Enable the IrDA function if tty->ldisc.num is N_IRDA. - * In other cases, disable IrDA function. - */ -static void bfin_serial_set_ldisc(struct uart_port *port, - struct ktermios *termios) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned int val; - - switch (termios->c_line) { - case N_IRDA: - val = UART_GET_GCTL(uart); - val |= (UMOD_IRDA | RPOLC); - UART_PUT_GCTL(uart, val); - break; - default: - val = UART_GET_GCTL(uart); - val &= ~(UMOD_MASK | RPOLC); - UART_PUT_GCTL(uart, val); - } -} - -static void bfin_serial_reset_irda(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned int val; - - val = UART_GET_GCTL(uart); - val &= ~(UMOD_MASK | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); - val |= (UMOD_IRDA | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); -} - -#ifdef CONFIG_CONSOLE_POLL -/* Anomaly notes: - * 05000099 - Because we only use THRE in poll_put and DR in poll_get, - * losing other bits of UART_LSR is not a problem here. - */ -static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - while (!(UART_GET_LSR(uart) & THRE)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - UART_PUT_CHAR(uart, (unsigned char)chr); -} - -static int bfin_serial_poll_get_char(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned char chr; - - while (!(UART_GET_LSR(uart) & DR)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - chr = UART_GET_CHAR(uart); - - return chr; -} -#endif - -static struct uart_ops bfin_serial_pops = { - .tx_empty = bfin_serial_tx_empty, - .set_mctrl = bfin_serial_set_mctrl, - .get_mctrl = bfin_serial_get_mctrl, - .stop_tx = bfin_serial_stop_tx, - .start_tx = bfin_serial_start_tx, - .stop_rx = bfin_serial_stop_rx, - .break_ctl = bfin_serial_break_ctl, - .startup = bfin_serial_startup, - .shutdown = bfin_serial_shutdown, - .set_termios = bfin_serial_set_termios, - .set_ldisc = bfin_serial_set_ldisc, - .type = bfin_serial_type, - .release_port = bfin_serial_release_port, - .request_port = bfin_serial_request_port, - .config_port = bfin_serial_config_port, - .verify_port = bfin_serial_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_put_char = bfin_serial_poll_put_char, - .poll_get_char = bfin_serial_poll_get_char, -#endif -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, - int *parity, int *bits) -{ - unsigned int status; - - status = UART_GET_IER(uart) & (ERBFI | ETBEI); - if (status == (ERBFI | ETBEI)) { - /* ok, the port was enabled */ - u32 lcr, clk; - - lcr = UART_GET_LCR(uart); - - *parity = 'n'; - if (lcr & PEN) { - if (lcr & EPS) - *parity = 'e'; - else - *parity = 'o'; - } - *bits = ((lcr & WLS_MASK) >> WLS_OFFSET) + 5; - - /* Set DLAB in LCR to Access CLK */ - UART_SET_DLAB(uart); - - clk = UART_GET_CLK(uart); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - *baud = get_sclk() / (16*clk); - } - pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); -} - -static struct uart_driver bfin_serial_reg; - -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); -} - -#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || - defined (CONFIG_EARLY_PRINTK) */ - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE -#define CLASS_BFIN_CONSOLE "bfin-console" -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = bfin_serial_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} - -static int __init -bfin_serial_console_setup(struct console *co, char *options) -{ - struct bfin_serial_port *uart; - int baud = 57600; - int bits = 8; - int parity = 'n'; -# if defined(SERIAL_BFIN_CTSRTS) || \ - defined(SERIAL_BFIN_HARD_CTSRTS) - int flow = 'r'; -# else - int flow = 'n'; -# endif - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) - return -ENODEV; - - uart = bfin_serial_ports[co->index]; - if (!uart) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - bfin_serial_console_get_options(uart, &baud, &parity, &bits); - - return uart_set_options(&uart->port, co, baud, parity, bits, flow); -} - -static struct console bfin_serial_console = { - .name = BFIN_SERIAL_DEV_NAME, - .write = bfin_serial_console_write, - .device = uart_console_device, - .setup = bfin_serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#define BFIN_SERIAL_CONSOLE (&bfin_serial_console) -#else -#define BFIN_SERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ - -#ifdef CONFIG_EARLY_PRINTK -static struct bfin_serial_port bfin_earlyprintk_port; -#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" - -/* - * Interrupts are disabled on entering - */ -static void -bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) -{ - unsigned long flags; - - if (bfin_earlyprintk_port.port.line != co->index) - return; - - spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); - uart_console_write(&bfin_earlyprintk_port.port, s, count, - bfin_serial_console_putchar); - spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); -} - -/* - * This should have a .setup or .early_setup in it, but then things get called - * without the command line options, and the baud rate gets messed up - so - * don't let the common infrastructure play with things. (see calls to setup - * & earlysetup in ./kernel/printk.c:register_console() - */ -static struct console bfin_early_serial_console __initdata = { - .name = "early_BFuart", - .write = bfin_earlyprintk_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#endif - -static struct uart_driver bfin_serial_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = BFIN_SERIAL_DEV_NAME, - .major = BFIN_SERIAL_MAJOR, - .minor = BFIN_SERIAL_MINOR, - .nr = BFIN_UART_NR_PORTS, - .cons = BFIN_SERIAL_CONSOLE, -}; - -static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_suspend_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_resume(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_resume_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_probe(struct platform_device *pdev) -{ - struct resource *res; - struct bfin_serial_port *uart = NULL; - int ret = 0; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); - return -ENOENT; - } - - if (bfin_serial_ports[pdev->id] == NULL) { - - uart = kzalloc(sizeof(*uart), GFP_KERNEL); - if (!uart) { - dev_err(&pdev->dev, - "fail to malloc bfin_serial_port\n"); - return -ENOMEM; - } - bfin_serial_ports[pdev->id] = uart; - -#ifdef CONFIG_EARLY_PRINTK - if (!(bfin_earlyprintk_port.port.membase - && bfin_earlyprintk_port.port.line == pdev->id)) { - /* - * If the peripheral PINs of current port is allocated - * in earlyprintk probe stage, don't do it again. - */ -#endif - ret = peripheral_request_list( - dev_get_platdata(&pdev->dev), - DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - goto out_error_free_mem; - } -#ifdef CONFIG_EARLY_PRINTK - } -#endif - - spin_lock_init(&uart->port.lock); - uart->port.uartclk = get_sclk(); - uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; - uart->port.ops = &bfin_serial_pops; - uart->port.line = pdev->id; - uart->port.iotype = UPIO_MEM; - uart->port.flags = UPF_BOOT_AUTOCONF; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - uart->port.membase = ioremap(res->start, resource_size(res)); - if (!uart->port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - uart->port.mapbase = res->start; - - uart->tx_irq = platform_get_irq(pdev, 0); - if (uart->tx_irq < 0) { - dev_err(&pdev->dev, "No uart TX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - - uart->rx_irq = platform_get_irq(pdev, 1); - if (uart->rx_irq < 0) { - dev_err(&pdev->dev, "No uart RX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->port.irq = uart->rx_irq; - - uart->status_irq = platform_get_irq(pdev, 2); - if (uart->status_irq < 0) { - dev_err(&pdev->dev, "No uart status IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - -#ifdef CONFIG_SERIAL_BFIN_DMA - spin_lock_init(&uart->rx_lock); - uart->tx_done = 1; - uart->tx_count = 0; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->tx_dma_channel = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->rx_dma_channel = res->start; - - timer_setup(&uart->rx_dma_timer, bfin_serial_rx_dma_timeout, 0); -#endif - -#if defined(SERIAL_BFIN_CTSRTS) || \ - defined(SERIAL_BFIN_HARD_CTSRTS) - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) - uart->cts_pin = -1; - else - uart->cts_pin = res->start; - - res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (res == NULL) - uart->rts_pin = -1; - else - uart->rts_pin = res->start; -#endif - } - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - if (!is_early_platform_device(pdev)) { -#endif - uart = bfin_serial_ports[pdev->id]; - uart->port.dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, uart); - ret = uart_add_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - } -#endif - - if (!ret) - return 0; - - if (uart) { -out_error_unmap: - iounmap(uart->port.membase); -out_error_free_peripherals: - peripheral_free_list(dev_get_platdata(&pdev->dev)); -out_error_free_mem: - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return ret; -} - -static int bfin_serial_remove(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - dev_set_drvdata(&pdev->dev, NULL); - - if (uart) { - uart_remove_one_port(&bfin_serial_reg, &uart->port); - iounmap(uart->port.membase); - peripheral_free_list(dev_get_platdata(&pdev->dev)); - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return 0; -} - -static struct platform_driver bfin_serial_driver = { - .probe = bfin_serial_probe, - .remove = bfin_serial_remove, - .suspend = bfin_serial_suspend, - .resume = bfin_serial_resume, - .driver = { - .name = DRIVER_NAME, - }, -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) -static struct early_platform_driver early_bfin_serial_driver __initdata = { - .class_str = CLASS_BFIN_CONSOLE, - .pdrv = &bfin_serial_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -static int __init bfin_serial_rs_console_init(void) -{ - early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); - - early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); - - register_console(&bfin_serial_console); - - return 0; -} -console_initcall(bfin_serial_rs_console_init); -#endif - -#ifdef CONFIG_EARLY_PRINTK -/* - * Memory can't be allocated dynamically during earlyprink init stage. - * So, do individual probe for earlyprink with a static uart port variable. - */ -static int bfin_earlyprintk_probe(struct platform_device *pdev) -{ - struct resource *res; - int ret; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); - return -ENOENT; - } - - ret = peripheral_request_list(dev_get_platdata(&pdev->dev), - DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - return ret; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - bfin_earlyprintk_port.port.membase = ioremap(res->start, - resource_size(res)); - if (!bfin_earlyprintk_port.port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - bfin_earlyprintk_port.port.mapbase = res->start; - bfin_earlyprintk_port.port.line = pdev->id; - bfin_earlyprintk_port.port.uartclk = get_sclk(); - bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; - spin_lock_init(&bfin_earlyprintk_port.port.lock); - - return 0; - -out_error_free_peripherals: - peripheral_free_list(dev_get_platdata(&pdev->dev)); - - return ret; -} - -static struct platform_driver bfin_earlyprintk_driver = { - .probe = bfin_earlyprintk_probe, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static struct early_platform_driver early_bfin_earlyprintk_driver __initdata = { - .class_str = CLASS_BFIN_EARLYPRINTK, - .pdrv = &bfin_earlyprintk_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -struct console __init *bfin_earlyserial_init(unsigned int port, - unsigned int cflag) -{ - struct ktermios t; - char port_name[20]; - - if (port < 0 || port >= BFIN_UART_NR_PORTS) - return NULL; - - /* - * Only probe resource of the given port in earlyprintk boot arg. - * The expected port id should be indicated in port name string. - */ - snprintf(port_name, 20, DRIVER_NAME ".%d", port); - early_platform_driver_register(&early_bfin_earlyprintk_driver, - port_name); - early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); - - if (!bfin_earlyprintk_port.port.membase) - return NULL; - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - /* - * If we are using early serial, don't let the normal console rewind - * log buffer, since that causes things to be printed multiple times - */ - bfin_serial_console.flags &= ~CON_PRINTBUFFER; -#endif - - bfin_early_serial_console.index = port; - t.c_cflag = cflag; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = port; - bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); - - return &bfin_early_serial_console; -} -#endif /* CONFIG_EARLY_PRINTK */ - -static int __init bfin_serial_init(void) -{ - int ret; - - pr_info("Blackfin serial driver\n"); - - ret = uart_register_driver(&bfin_serial_reg); - if (ret) { - pr_err("failed to register %s:%d\n", - bfin_serial_reg.driver_name, ret); - } - - ret = platform_driver_register(&bfin_serial_driver); - if (ret) { - pr_err("fail to register bfin uart\n"); - uart_unregister_driver(&bfin_serial_reg); - } - - return ret; -} - -static void __exit bfin_serial_exit(void) -{ - platform_driver_unregister(&bfin_serial_driver); - uart_unregister_driver(&bfin_serial_reg); -} - - -module_init(bfin_serial_init); -module_exit(bfin_serial_exit); - -MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); -MODULE_DESCRIPTION("Blackfin generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); -MODULE_ALIAS("platform:bfin-uart"); diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c deleted file mode 100644 index c9458a033e3c..000000000000 --- a/drivers/tty/serial/crisv10.c +++ /dev/null @@ -1,4248 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Serial port driver for the ETRAX 100LX chip - * - * Copyright (C) 1998-2007 Axis Communications AB - * - * Many, many authors. Based once upon a time on serial.c for 16x50. - * - */ - -static char *serial_version = "$Revision: 1.25 $"; - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched/signal.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mutex.h> -#include <linux/bitops.h> -#include <linux/seq_file.h> -#include <linux/delay.h> -#include <linux/uaccess.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/dma.h> - -#include <arch/svinto.h> -#include <arch/system.h> - -/* non-arch dependent serial structures are in linux/serial.h */ -#include <linux/serial.h> -/* while we keep our own stuff (struct e100_serial) in a local .h file */ -#include "crisv10.h" -#include <asm/fasttimer.h> -#include <arch/io_interface_mux.h> - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -#ifndef CONFIG_ETRAX_FAST_TIMER -#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER" -#endif -#endif - -#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \ - (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0) -#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" -#endif - -/* - * All of the compatibilty code so we can compile serial.c against - * older kernels is hidden in serial_compat.h - */ -#if defined(LOCAL_HEADERS) -#include "serial_compat.h" -#endif - -struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -//#define SERIAL_DEBUG_INTR -//#define SERIAL_DEBUG_OPEN -//#define SERIAL_DEBUG_FLOW -//#define SERIAL_DEBUG_DATA -//#define SERIAL_DEBUG_THROTTLE -//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */ -//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */ - -/* Enable this to use serial interrupts to handle when you - expect the first received event on the serial port to - be an error, break or similar. Used to be able to flash IRMA - from eLinux */ -#define SERIAL_HANDLE_EARLY_ERRORS - -/* Currently 16 descriptors x 128 bytes = 2048 bytes */ -#define SERIAL_DESCR_BUF_SIZE 256 - -#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */ -#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE - -/* We don't want to load the system with massive fast timer interrupt - * on high baudrates so limit it to 250 us (4kHz) */ -#define MIN_FLUSH_TIME_USEC 250 - -/* Add an x here to log a lot of timer stuff */ -#define TIMERD(x) -/* Debug details of interrupt handling */ -#define DINTR1(x) /* irq on/off, errors */ -#define DINTR2(x) /* tx and rx */ -/* Debug flip buffer stuff */ -#define DFLIP(x) -/* Debug flow control and overview of data flow */ -#define DFLOW(x) -#define DBAUD(x) -#define DLOG_INT_TRIG(x) - -//#define DEBUG_LOG_INCLUDED -#ifndef DEBUG_LOG_INCLUDED -#define DEBUG_LOG(line, string, value) -#else -struct debug_log_info -{ - unsigned long time; - unsigned long timer_data; -// int line; - const char *string; - int value; -}; -#define DEBUG_LOG_SIZE 4096 - -struct debug_log_info debug_log[DEBUG_LOG_SIZE]; -int debug_log_pos = 0; - -#define DEBUG_LOG(_line, _string, _value) do { \ - if ((_line) == SERIAL_DEBUG_LINE) {\ - debug_log_func(_line, _string, _value); \ - }\ -}while(0) - -void debug_log_func(int line, const char *string, int value) -{ - if (debug_log_pos < DEBUG_LOG_SIZE) { - debug_log[debug_log_pos].time = jiffies; - debug_log[debug_log_pos].timer_data = *R_TIMER_DATA; -// debug_log[debug_log_pos].line = line; - debug_log[debug_log_pos].string = string; - debug_log[debug_log_pos].value = value; - debug_log_pos++; - } - /*printk(string, value);*/ -} -#endif - -#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS -/* Default number of timer ticks before flushing rx fifo - * When using "little data, low latency applications: use 0 - * When using "much data applications (PPP)" use ~5 - */ -#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5 -#endif - -unsigned long timer_data_to_ns(unsigned long timer_data); - -static void change_speed(struct e100_serial *info); -static void rs_throttle(struct tty_struct * tty); -static void rs_wait_until_sent(struct tty_struct *tty, int timeout); -static int rs_write(struct tty_struct *tty, - const unsigned char *buf, int count); -#ifdef CONFIG_ETRAX_RS485 -static int e100_write_rs485(struct tty_struct *tty, - const unsigned char *buf, int count); -#endif -static int get_lsr_info(struct e100_serial *info, unsigned int *value); - - -#define DEF_BAUD 115200 /* 115.2 kbit/s */ -#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */ -/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */ -#define DEF_TX 0x80 /* or SERIAL_CTRL_B */ - -/* offsets from R_SERIALx_CTRL */ - -#define REG_DATA 0 -#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */ -#define REG_TR_DATA 0 -#define REG_STATUS 1 -#define REG_TR_CTRL 1 -#define REG_REC_CTRL 2 -#define REG_BAUD 3 -#define REG_XOFF 4 /* this is a 32 bit register */ - -/* The bitfields are the same for all serial ports */ -#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd) -#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail) -#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err) -#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err) -#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun) - -#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK) - -/* Values for info->errorcode */ -#define ERRCODE_SET_BREAK (TTY_BREAK) -#define ERRCODE_INSERT 0x100 -#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK) - -#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop; - -/* - * General note regarding the use of IO_* macros in this file: - * - * We will use the bits defined for DMA channel 6 when using various - * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are - * the same for all channels (which of course they are). - * - * We will also use the bits defined for serial port 0 when writing commands - * to the different ports, as these bits too are the same for all ports. - */ - - -/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */ -static const unsigned long e100_ser_int_mask = 0 -#ifdef CONFIG_ETRAX_SERIAL_PORT0 -| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT1 -| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2 -| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3 -| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready) -#endif -; -unsigned long r_alt_ser_baudrate_shadow = 0; - -/* this is the data for the four serial ports in the etrax100 */ -/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */ -/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */ - -static struct e100_serial rs_table[] = { - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL0_CTRL, - .irq = 1U << 12, /* uses DMA 6 and 7 */ - .oclrintradr = R_DMA_CH6_CLR_INTR, - .ofirstadr = R_DMA_CH6_FIRST, - .ocmdadr = R_DMA_CH6_CMD, - .ostatusadr = R_DMA_CH6_STATUS, - .iclrintradr = R_DMA_CH7_CLR_INTR, - .ifirstadr = R_DMA_CH7_FIRST, - .icmdadr = R_DMA_CH7_CMD, - .idescradr = R_DMA_CH7_DESCR, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 2, - .dma_owner = dma_ser0, - .io_if = if_serial_0, -#ifdef CONFIG_ETRAX_SERIAL_PORT0 - .enabled = 1, -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER0_TX_DMA_NBR, - .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = 0, - .dma_out_irq_description = "serial 0 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER0_RX_DMA_NBR, - .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = 0, - .dma_in_irq_description = "serial 0 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - -}, /* ttyS0 */ - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL1_CTRL, - .irq = 1U << 16, /* uses DMA 8 and 9 */ - .oclrintradr = R_DMA_CH8_CLR_INTR, - .ofirstadr = R_DMA_CH8_FIRST, - .ocmdadr = R_DMA_CH8_CMD, - .ostatusadr = R_DMA_CH8_STATUS, - .iclrintradr = R_DMA_CH9_CLR_INTR, - .ifirstadr = R_DMA_CH9_FIRST, - .icmdadr = R_DMA_CH9_CMD, - .idescradr = R_DMA_CH9_DESCR, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 3, - .dma_owner = dma_ser1, - .io_if = if_serial_1, -#ifdef CONFIG_ETRAX_SERIAL_PORT1 - .enabled = 1, - .io_if_description = "ser1", -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER1_TX_DMA_NBR, - .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = 0, - .dma_out_irq_description = "serial 1 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER1_RX_DMA_NBR, - .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = 0, - .dma_in_irq_description = "serial 1 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_in_irq_nbr = 0, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif -}, /* ttyS1 */ - - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL2_CTRL, - .irq = 1U << 4, /* uses DMA 2 and 3 */ - .oclrintradr = R_DMA_CH2_CLR_INTR, - .ofirstadr = R_DMA_CH2_FIRST, - .ocmdadr = R_DMA_CH2_CMD, - .ostatusadr = R_DMA_CH2_STATUS, - .iclrintradr = R_DMA_CH3_CLR_INTR, - .ifirstadr = R_DMA_CH3_FIRST, - .icmdadr = R_DMA_CH3_CMD, - .idescradr = R_DMA_CH3_DESCR, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 0, - .dma_owner = dma_ser2, - .io_if = if_serial_2, -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - .enabled = 1, - .io_if_description = "ser2", -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER2_TX_DMA_NBR, - .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = 0, - .dma_out_irq_description = "serial 2 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER2_RX_DMA_NBR, - .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = 0, - .dma_in_irq_description = "serial 2 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - }, /* ttyS2 */ - - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL3_CTRL, - .irq = 1U << 8, /* uses DMA 4 and 5 */ - .oclrintradr = R_DMA_CH4_CLR_INTR, - .ofirstadr = R_DMA_CH4_FIRST, - .ocmdadr = R_DMA_CH4_CMD, - .ostatusadr = R_DMA_CH4_STATUS, - .iclrintradr = R_DMA_CH5_CLR_INTR, - .ifirstadr = R_DMA_CH5_FIRST, - .icmdadr = R_DMA_CH5_CMD, - .idescradr = R_DMA_CH5_DESCR, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 1, - .dma_owner = dma_ser3, - .io_if = if_serial_3, -#ifdef CONFIG_ETRAX_SERIAL_PORT3 - .enabled = 1, - .io_if_description = "ser3", -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER3_TX_DMA_NBR, - .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = 0, - .dma_out_irq_description = "serial 3 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER3_RX_DMA_NBR, - .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = 0, - .dma_in_irq_description = "serial 3 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - } /* ttyS3 */ -}; - - -#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static struct fast_timer fast_timers[NR_PORTS]; -#endif - -/* RS-485 */ -#if defined(CONFIG_ETRAX_RS485) -#ifdef CONFIG_ETRAX_FAST_TIMER -static struct fast_timer fast_timers_rs485[NR_PORTS]; -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PA) -static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; -#endif -#endif - -/* Info and macros needed for each ports extra control/status signals. */ -#define E100_STRUCT_PORT(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (R_PORT_PA_DATA): ( \ - (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ - (R_PORT_PB_DATA):&dummy_ser[line])) - -#define E100_STRUCT_SHADOW(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (&port_pa_data_shadow): ( \ - (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ - (&port_pb_data_shadow):&dummy_ser[line])) -#define E100_STRUCT_MASK(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT): ( \ - (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ - (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT):DUMMY_##pinname##_MASK)) - -#define DUMMY_DTR_MASK 1 -#define DUMMY_RI_MASK 2 -#define DUMMY_DSR_MASK 4 -#define DUMMY_CD_MASK 8 -static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF}; - -/* If not all status pins are used or disabled, use mixed mode */ -#ifdef CONFIG_ETRAX_SERIAL_PORT0 - -#define SER0_PA_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PA_BIT+CONFIG_ETRAX_SER0_RI_ON_PA_BIT+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT+CONFIG_ETRAX_SER0_CD_ON_PA_BIT) - -#if SER0_PA_BITSUM != -4 -# if CONFIG_ETRAX_SER0_DTR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER0_RI_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER0_DSR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER0_CD_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#define SER0_PB_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PB_BIT+CONFIG_ETRAX_SER0_RI_ON_PB_BIT+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT+CONFIG_ETRAX_SER0_CD_ON_PB_BIT) - -#if SER0_PB_BITSUM != -4 -# if CONFIG_ETRAX_SER0_DTR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER0_RI_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER0_DSR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER0_CD_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#endif /* PORT0 */ - - -#ifdef CONFIG_ETRAX_SERIAL_PORT1 - -#define SER1_PA_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PA_BIT+CONFIG_ETRAX_SER1_RI_ON_PA_BIT+CONFIG_ETRAX_SER1_DSR_ON_PA_BIT+CONFIG_ETRAX_SER1_CD_ON_PA_BIT) - -#if SER1_PA_BITSUM != -4 -# if CONFIG_ETRAX_SER1_DTR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER1_RI_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER1_DSR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER1_CD_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#define SER1_PB_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PB_BIT+CONFIG_ETRAX_SER1_RI_ON_PB_BIT+CONFIG_ETRAX_SER1_DSR_ON_PB_BIT+CONFIG_ETRAX_SER1_CD_ON_PB_BIT) - -#if SER1_PB_BITSUM != -4 -# if CONFIG_ETRAX_SER1_DTR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER1_RI_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER1_DSR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER1_CD_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#endif /* PORT1 */ - -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - -#define SER2_PA_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PA_BIT+CONFIG_ETRAX_SER2_RI_ON_PA_BIT+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT+CONFIG_ETRAX_SER2_CD_ON_PA_BIT) - -#if SER2_PA_BITSUM != -4 -# if CONFIG_ETRAX_SER2_DTR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER2_RI_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER2_DSR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER2_CD_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#define SER2_PB_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PB_BIT+CONFIG_ETRAX_SER2_RI_ON_PB_BIT+CONFIG_ETRAX_SER2_DSR_ON_PB_BIT+CONFIG_ETRAX_SER2_CD_ON_PB_BIT) - -#if SER2_PB_BITSUM != -4 -# if CONFIG_ETRAX_SER2_DTR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER2_RI_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER2_DSR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER2_CD_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#endif /* PORT2 */ - -#ifdef CONFIG_ETRAX_SERIAL_PORT3 - -#define SER3_PA_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PA_BIT+CONFIG_ETRAX_SER3_RI_ON_PA_BIT+CONFIG_ETRAX_SER3_DSR_ON_PA_BIT+CONFIG_ETRAX_SER3_CD_ON_PA_BIT) - -#if SER3_PA_BITSUM != -4 -# if CONFIG_ETRAX_SER3_DTR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER3_RI_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER3_DSR_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER3_CD_ON_PA_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#define SER3_PB_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PB_BIT+CONFIG_ETRAX_SER3_RI_ON_PB_BIT+CONFIG_ETRAX_SER3_DSR_ON_PB_BIT+CONFIG_ETRAX_SER3_CD_ON_PB_BIT) - -#if SER3_PB_BITSUM != -4 -# if CONFIG_ETRAX_SER3_DTR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER3_RI_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER3_DSR_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -# if CONFIG_ETRAX_SER3_CD_ON_PB_BIT == -1 -# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED -# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1 -# endif -# endif -#endif - -#endif /* PORT3 */ - - -#if defined(CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED) || \ - defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \ - defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \ - defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED) -#define ETRAX_SERX_DTR_RI_DSR_CD_MIXED -#endif - -#ifdef ETRAX_SERX_DTR_RI_DSR_CD_MIXED -/* The pins can be mixed on PA and PB */ -#define CONTROL_PINS_PORT_NOT_USED(line) \ - &dummy_ser[line], &dummy_ser[line], \ - &dummy_ser[line], &dummy_ser[line], \ - &dummy_ser[line], &dummy_ser[line], \ - &dummy_ser[line], &dummy_ser[line], \ - DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK - - -struct control_pins -{ - volatile unsigned char *dtr_port; - unsigned char *dtr_shadow; - volatile unsigned char *ri_port; - unsigned char *ri_shadow; - volatile unsigned char *dsr_port; - unsigned char *dsr_shadow; - volatile unsigned char *cd_port; - unsigned char *cd_shadow; - - unsigned char dtr_mask; - unsigned char ri_mask; - unsigned char dsr_mask; - unsigned char cd_mask; -}; - -static const struct control_pins e100_modem_pins[NR_PORTS] = -{ - /* Ser 0 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT0 - E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR), - E100_STRUCT_PORT(0,RI), E100_STRUCT_SHADOW(0,RI), - E100_STRUCT_PORT(0,DSR), E100_STRUCT_SHADOW(0,DSR), - E100_STRUCT_PORT(0,CD), E100_STRUCT_SHADOW(0,CD), - E100_STRUCT_MASK(0,DTR), - E100_STRUCT_MASK(0,RI), - E100_STRUCT_MASK(0,DSR), - E100_STRUCT_MASK(0,CD) -#else - CONTROL_PINS_PORT_NOT_USED(0) -#endif - }, - - /* Ser 1 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT1 - E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR), - E100_STRUCT_PORT(1,RI), E100_STRUCT_SHADOW(1,RI), - E100_STRUCT_PORT(1,DSR), E100_STRUCT_SHADOW(1,DSR), - E100_STRUCT_PORT(1,CD), E100_STRUCT_SHADOW(1,CD), - E100_STRUCT_MASK(1,DTR), - E100_STRUCT_MASK(1,RI), - E100_STRUCT_MASK(1,DSR), - E100_STRUCT_MASK(1,CD) -#else - CONTROL_PINS_PORT_NOT_USED(1) -#endif - }, - - /* Ser 2 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR), - E100_STRUCT_PORT(2,RI), E100_STRUCT_SHADOW(2,RI), - E100_STRUCT_PORT(2,DSR), E100_STRUCT_SHADOW(2,DSR), - E100_STRUCT_PORT(2,CD), E100_STRUCT_SHADOW(2,CD), - E100_STRUCT_MASK(2,DTR), - E100_STRUCT_MASK(2,RI), - E100_STRUCT_MASK(2,DSR), - E100_STRUCT_MASK(2,CD) -#else - CONTROL_PINS_PORT_NOT_USED(2) -#endif - }, - - /* Ser 3 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT3 - E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR), - E100_STRUCT_PORT(3,RI), E100_STRUCT_SHADOW(3,RI), - E100_STRUCT_PORT(3,DSR), E100_STRUCT_SHADOW(3,DSR), - E100_STRUCT_PORT(3,CD), E100_STRUCT_SHADOW(3,CD), - E100_STRUCT_MASK(3,DTR), - E100_STRUCT_MASK(3,RI), - E100_STRUCT_MASK(3,DSR), - E100_STRUCT_MASK(3,CD) -#else - CONTROL_PINS_PORT_NOT_USED(3) -#endif - } -}; -#else /* ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ - -/* All pins are on either PA or PB for each serial port */ -#define CONTROL_PINS_PORT_NOT_USED(line) \ - &dummy_ser[line], &dummy_ser[line], \ - DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK - - -struct control_pins -{ - volatile unsigned char *port; - unsigned char *shadow; - - unsigned char dtr_mask; - unsigned char ri_mask; - unsigned char dsr_mask; - unsigned char cd_mask; -}; - -#define dtr_port port -#define dtr_shadow shadow -#define ri_port port -#define ri_shadow shadow -#define dsr_port port -#define dsr_shadow shadow -#define cd_port port -#define cd_shadow shadow - -static const struct control_pins e100_modem_pins[NR_PORTS] = -{ - /* Ser 0 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT0 - E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR), - E100_STRUCT_MASK(0,DTR), - E100_STRUCT_MASK(0,RI), - E100_STRUCT_MASK(0,DSR), - E100_STRUCT_MASK(0,CD) -#else - CONTROL_PINS_PORT_NOT_USED(0) -#endif - }, - - /* Ser 1 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT1 - E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR), - E100_STRUCT_MASK(1,DTR), - E100_STRUCT_MASK(1,RI), - E100_STRUCT_MASK(1,DSR), - E100_STRUCT_MASK(1,CD) -#else - CONTROL_PINS_PORT_NOT_USED(1) -#endif - }, - - /* Ser 2 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR), - E100_STRUCT_MASK(2,DTR), - E100_STRUCT_MASK(2,RI), - E100_STRUCT_MASK(2,DSR), - E100_STRUCT_MASK(2,CD) -#else - CONTROL_PINS_PORT_NOT_USED(2) -#endif - }, - - /* Ser 3 */ - { -#ifdef CONFIG_ETRAX_SERIAL_PORT3 - E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR), - E100_STRUCT_MASK(3,DTR), - E100_STRUCT_MASK(3,RI), - E100_STRUCT_MASK(3,DSR), - E100_STRUCT_MASK(3,CD) -#else - CONTROL_PINS_PORT_NOT_USED(3) -#endif - } -}; -#endif /* !ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ - -#define E100_RTS_MASK 0x20 -#define E100_CTS_MASK 0x40 - -/* All serial port signals are active low: - * active = 0 -> 3.3V to RS-232 driver -> -12V on RS-232 level - * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level - * - * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip - */ - -/* Output */ -#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) -/* Input */ -#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) - -/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ -/* Is an output */ -#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask) - -/* Normally inputs */ -#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask) -#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask) - -/* Input */ -#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask) - -/* Calculate the chartime depending on baudrate, numbor of bits etc. */ -static void update_char_time(struct e100_serial * info) -{ - tcflag_t cflags = info->port.tty->termios.c_cflag; - int bits; - - /* calc. number of bits / data byte */ - /* databits + startbit and 1 stopbit */ - if ((cflags & CSIZE) == CS7) - bits = 9; - else - bits = 10; - - if (cflags & CSTOPB) /* 2 stopbits ? */ - bits++; - - if (cflags & PARENB) /* parity bit ? */ - bits++; - - /* calc timeout */ - info->char_time_usec = ((bits * 1000000) / info->baud) + 1; - info->flush_time_usec = 4*info->char_time_usec; - if (info->flush_time_usec < MIN_FLUSH_TIME_USEC) - info->flush_time_usec = MIN_FLUSH_TIME_USEC; - -} - -/* - * This function maps from the Bxxxx defines in asm/termbits.h into real - * baud rates. - */ - -static int -cflag_to_baud(unsigned int cflag) -{ - static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400 }; - - static int ext_baud_table[] = { - 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000, - 0, 0, 0, 0, 0, 0, 0, 0 }; - - if (cflag & CBAUDEX) - return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; - else - return baud_table[cflag & CBAUD]; -} - -/* and this maps to an etrax100 hardware baud constant */ - -static unsigned char -cflag_to_etrax_baud(unsigned int cflag) -{ - char retval; - - static char baud_table[] = { - -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 }; - - static char ext_baud_table[] = { - -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 }; - - if (cflag & CBAUDEX) - retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; - else - retval = baud_table[cflag & CBAUD]; - - if (retval < 0) { - printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag); - retval = 5; /* choose default 9600 instead */ - } - - return retval | (retval << 4); /* choose same for both TX and RX */ -} - - -/* Various static support functions */ - -/* Functions to set or clear DTR/RTS on the requested line */ -/* It is complicated by the fact that RTS is a serial port register, while - * DTR might not be implemented in the HW at all, and if it is, it can be on - * any general port. - */ - - -static inline void -e100_dtr(struct e100_serial *info, int set) -{ - unsigned char mask = e100_modem_pins[info->line].dtr_mask; - -#ifdef SERIAL_DEBUG_IO - printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask); - printk("ser%i shadow before 0x%02X get: %i\n", - info->line, *e100_modem_pins[info->line].dtr_shadow, - E100_DTR_GET(info)); -#endif - /* DTR is active low */ - { - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].dtr_shadow &= ~mask; - *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; - local_irq_restore(flags); - } - -#ifdef SERIAL_DEBUG_IO - printk("ser%i shadow after 0x%02X get: %i\n", - info->line, *e100_modem_pins[info->line].dtr_shadow, - E100_DTR_GET(info)); -#endif -} - -/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive - * 0=0V , 1=3.3V - */ -static inline void -e100_rts(struct e100_serial *info, int set) -{ - unsigned long flags; - local_irq_save(flags); - info->rx_ctrl &= ~E100_RTS_MASK; - info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ - info->ioport[REG_REC_CTRL] = info->rx_ctrl; - local_irq_restore(flags); -#ifdef SERIAL_DEBUG_IO - printk("ser%i rts %i\n", info->line, set); -#endif -} - - -/* If this behaves as a modem, RI and CD is an output */ -static inline void -e100_ri_out(struct e100_serial *info, int set) -{ - /* RI is active low */ - { - unsigned char mask = e100_modem_pins[info->line].ri_mask; - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].ri_shadow &= ~mask; - *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; - local_irq_restore(flags); - } -} -static inline void -e100_cd_out(struct e100_serial *info, int set) -{ - /* CD is active low */ - { - unsigned char mask = e100_modem_pins[info->line].cd_mask; - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].cd_shadow &= ~mask; - *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; - local_irq_restore(flags); - } -} - -static inline void -e100_disable_rx(struct e100_serial *info) -{ - /* disable the receiver */ - info->ioport[REG_REC_CTRL] = - (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -} - -static inline void -e100_enable_rx(struct e100_serial *info) -{ - /* enable the receiver */ - info->ioport[REG_REC_CTRL] = - (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -} - -/* the rx DMA uses both the dma_descr and the dma_eop interrupts */ - -static inline void -e100_disable_rxdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("rxdma_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line)); - *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3); -} - -static inline void -e100_enable_rxdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("rxdma_irq(%d): 1\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line)); - *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3); -} - -/* the tx DMA uses only dma_descr interrupt */ - -static void e100_disable_txdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("txdma_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line)); - *R_IRQ_MASK2_CLR = info->irq; -} - -static void e100_enable_txdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("txdma_irq(%d): 1\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line)); - *R_IRQ_MASK2_SET = info->irq; -} - -static void e100_disable_txdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - /* Disable output DMA channel for the serial port in question - * ( set to something other than serialX) - */ - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == - IO_STATE(R_GEN_CONFIG, dma6, serial0)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); - } - } else if (info->line == 1) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) == - IO_STATE(R_GEN_CONFIG, dma8, serial1)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); - } - } else if (info->line == 2) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) == - IO_STATE(R_GEN_CONFIG, dma2, serial2)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); - } - } else if (info->line == 3) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) == - IO_STATE(R_GEN_CONFIG, dma4, serial3)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); - } - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - - -static void e100_enable_txdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); - /* Enable output DMA channel for the serial port in question */ - if (info->line == 0) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0); - } else if (info->line == 1) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1); - } else if (info->line == 2) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2); - } else if (info->line == 3) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - -static void e100_disable_rxdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - /* Disable input DMA channel for the serial port in question - * ( set to something other than serialX) - */ - local_irq_save(flags); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == - IO_STATE(R_GEN_CONFIG, dma7, serial0)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused); - } - } else if (info->line == 1) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) == - IO_STATE(R_GEN_CONFIG, dma9, serial1)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb); - } - } else if (info->line == 2) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) == - IO_STATE(R_GEN_CONFIG, dma3, serial2)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); - } - } else if (info->line == 3) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) == - IO_STATE(R_GEN_CONFIG, dma5, serial3)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); - } - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - - -static void e100_enable_rxdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - local_irq_save(flags); - /* Enable input DMA channel for the serial port in question */ - if (info->line == 0) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0); - } else if (info->line == 1) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1); - } else if (info->line == 2) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2); - } else if (info->line == 3) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - -#ifdef SERIAL_HANDLE_EARLY_ERRORS -/* in order to detect and fix errors on the first byte - we have to use the serial interrupts as well. */ - -static inline void -e100_disable_serial_data_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line)); - *R_IRQ_MASK1_CLR = (1U << (8+2*info->line)); -} - -static inline void -e100_enable_serial_data_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_irq(%d): 1\n",info->line); - printk("**** %d = %d\n", - (8+2*info->line), - (1U << (8+2*info->line))); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line)); - *R_IRQ_MASK1_SET = (1U << (8+2*info->line)); -} -#endif - -static inline void -e100_disable_serial_tx_ready_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_tx_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line)); - *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line)); -} - -static inline void -e100_enable_serial_tx_ready_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_tx_irq(%d): 1\n",info->line); - printk("**** %d = %d\n", - (8+1+2*info->line), - (1U << (8+1+2*info->line))); -#endif - DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line)); - *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line)); -} - -static inline void e100_enable_rx_irq(struct e100_serial *info) -{ - if (info->uses_dma_in) - e100_enable_rxdma_irq(info); - else - e100_enable_serial_data_irq(info); -} -static inline void e100_disable_rx_irq(struct e100_serial *info) -{ - if (info->uses_dma_in) - e100_disable_rxdma_irq(info); - else - e100_disable_serial_data_irq(info); -} - -#if defined(CONFIG_ETRAX_RS485) -/* Enable RS-485 mode on selected port. This is UGLY. */ -static int -e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - -#if defined(CONFIG_ETRAX_RS485_ON_PA) - *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); -#endif - - info->rs485 = *r; - - /* Maximum delay before RTS equal to 1000 */ - if (info->rs485.delay_rts_before_send >= 1000) - info->rs485.delay_rts_before_send = 1000; - -/* printk("rts: on send = %i, after = %i, enabled = %i", - info->rs485.rts_on_send, - info->rs485.rts_after_sent, - info->rs485.enabled - ); -*/ - return 0; -} - -static int -e100_write_rs485(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - int old_value = (info->rs485.flags) & SER_RS485_ENABLED; - - /* rs485 is always implicitly enabled if we're using the ioctl() - * but it doesn't have to be set in the serial_rs485 - * (to be backward compatible with old apps) - * So we store, set and restore it. - */ - info->rs485.flags |= SER_RS485_ENABLED; - /* rs_write now deals with RS485 if enabled */ - count = rs_write(tty, buf, count); - if (!old_value) - info->rs485.flags &= ~(SER_RS485_ENABLED); - return count; -} - -#ifdef CONFIG_ETRAX_FAST_TIMER -/* Timer function to toggle RTS when using FAST_TIMER */ -static void rs485_toggle_rts_timer_function(unsigned long data) -{ - struct e100_serial *info = (struct e100_serial *)data; - - fast_timers_rs485[info->line].function = NULL; - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_enable_rx(info); - e100_enable_rx_irq(info); -#endif -} -#endif -#endif /* CONFIG_ETRAX_RS485 */ - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter using the XOFF registers, as necessary. - * ------------------------------------------------------------ - */ - -static void -rs_stop(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - if (info) { - unsigned long flags; - unsigned long xoff; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); - - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, - STOP_CHAR(info->port.tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); - if (I_IXON(tty)) - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - local_irq_restore(flags); - } -} - -static void -rs_start(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - if (info) { - unsigned long flags; - unsigned long xoff; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (I_IXON(tty)) - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - if (!info->uses_dma_out && - info->xmit.head != info->xmit.tail && info->xmit.buf) - e100_enable_serial_tx_ready_irq(info); - - local_irq_restore(flags); - } -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static void rs_sched_event(struct e100_serial *info, int event) -{ - if (info->event & (1 << event)) - return; - info->event |= 1 << event; - schedule_work(&info->work); -} - -/* The output DMA channel is free - use it to send as many chars as possible - * NOTES: - * We don't pay attention to info->x_char, which means if the TTY wants to - * use XON/XOFF it will set info->x_char but we won't send any X char! - * - * To implement this, we'd just start a DMA send of 1 byte pointing at a - * buffer containing the X char, and skip updating xmit. We'd also have to - * check if the last sent char was the X char when we enter this function - * the next time, to avoid updating xmit with the sent X value. - */ - -static void -transmit_chars_dma(struct e100_serial *info) -{ - unsigned int c, sentl; - struct etrax_dma_descr *descr; - - /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ - *info->oclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - -#ifdef SERIAL_DEBUG_INTR - if (info->line == SERIAL_DEBUG_LINE) - printk("tc\n"); -#endif - if (!info->tr_running) { - /* weirdo... we shouldn't get here! */ - printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n"); - return; - } - - descr = &info->tr_descr; - - /* first get the amount of bytes sent during the last DMA transfer, - and update xmit accordingly */ - - /* if the stop bit was not set, all data has been sent */ - if (!(descr->status & d_stop)) { - sentl = descr->sw_len; - } else - /* otherwise we find the amount of data sent here */ - sentl = descr->hw_len; - - DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl)); - - /* update stats */ - info->icount.tx += sentl; - - /* update xmit buffer */ - info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1); - - /* if there is only a few chars left in the buf, wake up the blocked - write if any */ - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - - /* find out the largest amount of consecutive bytes we want to send now */ - - c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - - /* Don't send all in one DMA transfer - divide it so we wake up - * application before all is sent - */ - - if (c >= 4*WAKEUP_CHARS) - c = c/2; - - if (c <= 0) { - /* our job here is done, don't schedule any new DMA transfer */ - info->tr_running = 0; - -#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.flags & SER_RS485_ENABLED) { - /* Set a short timer to toggle RTS */ - start_one_shot_timer(&fast_timers_rs485[info->line], - rs485_toggle_rts_timer_function, - (unsigned long)info, - info->char_time_usec*2, - "RS-485"); - } -#endif /* RS485 */ - return; - } - - /* ok we can schedule a dma send of c chars starting at info->xmit.tail */ - /* set up the descriptor correctly for output */ - DFLOW(DEBUG_LOG(info->line, "TX %i\n", c)); - descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */ - descr->sw_len = c; - descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail); - descr->status = 0; - - *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */ - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); - - /* DMA is now running (hopefully) */ -} /* transmit_chars_dma */ - -static void -start_transmit(struct e100_serial *info) -{ -#if 0 - if (info->line == SERIAL_DEBUG_LINE) - printk("x\n"); -#endif - - info->tr_descr.sw_len = 0; - info->tr_descr.hw_len = 0; - info->tr_descr.status = 0; - info->tr_running = 1; - if (info->uses_dma_out) - transmit_chars_dma(info); - else - e100_enable_serial_tx_ready_irq(info); -} /* start_transmit */ - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static int serial_fast_timer_started = 0; -static int serial_fast_timer_expired = 0; -static void flush_timeout_function(unsigned long data); -#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ - unsigned long timer_flags; \ - local_irq_save(timer_flags); \ - if (fast_timers[info->line].function == NULL) { \ - serial_fast_timer_started++; \ - TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ - TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \ - start_one_shot_timer(&fast_timers[info->line], \ - flush_timeout_function, \ - (unsigned long)info, \ - (usec), \ - string); \ - } \ - else { \ - TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ - } \ - local_irq_restore(timer_flags); \ -} -#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) - -#else -#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) -#define START_FLUSH_FAST_TIMER(info, string) -#endif - -static struct etrax_recv_buffer * -alloc_recv_buffer(unsigned int size) -{ - struct etrax_recv_buffer *buffer; - - buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC); - if (!buffer) - return NULL; - - buffer->next = NULL; - buffer->length = 0; - buffer->error = TTY_NORMAL; - - return buffer; -} - -static void -append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) -{ - unsigned long flags; - - local_irq_save(flags); - - if (!info->first_recv_buffer) - info->first_recv_buffer = buffer; - else - info->last_recv_buffer->next = buffer; - - info->last_recv_buffer = buffer; - - info->recv_cnt += buffer->length; - if (info->recv_cnt > info->max_recv_cnt) - info->max_recv_cnt = info->recv_cnt; - - local_irq_restore(flags); -} - -static int -add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag) -{ - struct etrax_recv_buffer *buffer; - if (info->uses_dma_in) { - buffer = alloc_recv_buffer(4); - if (!buffer) - return 0; - - buffer->length = 1; - buffer->error = flag; - buffer->buffer[0] = data; - - append_recv_buffer(info, buffer); - - info->icount.rx++; - } else { - tty_insert_flip_char(&info->port, data, flag); - info->icount.rx++; - } - - return 1; -} - -static unsigned int handle_descr_data(struct e100_serial *info, - struct etrax_dma_descr *descr, - unsigned int recvl) -{ - struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; - - if (info->recv_cnt + recvl > 65536) { - printk(KERN_WARNING - "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl); - return 0; - } - - buffer->length = recvl; - - if (info->errorcode == ERRCODE_SET_BREAK) - buffer->error = TTY_BREAK; - info->errorcode = 0; - - append_recv_buffer(info, buffer); - - buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); - if (!buffer) - panic("%s: Failed to allocate memory for receive buffer!\n", __func__); - - descr->buf = virt_to_phys(buffer->buffer); - - return recvl; -} - -static unsigned int handle_all_descr_data(struct e100_serial *info) -{ - struct etrax_dma_descr *descr; - unsigned int recvl; - unsigned int ret = 0; - - while (1) - { - descr = &info->rec_descr[info->cur_rec_descr]; - - if (descr == phys_to_virt(*info->idescradr)) - break; - - if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) - info->cur_rec_descr = 0; - - /* find out how many bytes were read */ - - /* if the eop bit was not set, all data has been received */ - if (!(descr->status & d_eop)) { - recvl = descr->sw_len; - } else { - /* otherwise we find the amount of data received here */ - recvl = descr->hw_len; - } - - /* Reset the status information */ - descr->status = 0; - - DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl); - if (info->port.tty->stopped) { - unsigned char *buf = phys_to_virt(descr->buf); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]); - } - ); - - /* update stats */ - info->icount.rx += recvl; - - ret += handle_descr_data(info, descr, recvl); - } - - return ret; -} - -static void receive_chars_dma(struct e100_serial *info) -{ - struct tty_struct *tty; - unsigned char rstat; - - /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ - *info->iclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - - tty = info->port.tty; - if (!tty) /* Something wrong... */ - return; - -#ifdef SERIAL_HANDLE_EARLY_ERRORS - if (info->uses_dma_in) - e100_enable_serial_data_irq(info); -#endif - - if (info->errorcode == ERRCODE_INSERT_BREAK) - add_char_and_flag(info, '\0', TTY_BREAK); - - handle_all_descr_data(info); - - /* Read the status register to detect errors */ - rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); - } - - if (rstat & SER_ERROR_MASK) { - /* If we got an error, we must reset it by reading the - * data_in field - */ - unsigned char data = info->ioport[REG_DATA]; - - DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", - ((rstat & SER_ERROR_MASK) << 8) | data); - - if (rstat & SER_PAR_ERR_MASK) - add_char_and_flag(info, data, TTY_PARITY); - else if (rstat & SER_OVERRUN_MASK) - add_char_and_flag(info, data, TTY_OVERRUN); - else if (rstat & SER_FRAMING_ERR_MASK) - add_char_and_flag(info, data, TTY_FRAME); - } - - START_FLUSH_FAST_TIMER(info, "receive_chars"); - - /* Restart the receiving DMA */ - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); -} - -static int start_recv_dma(struct e100_serial *info) -{ - struct etrax_dma_descr *descr = info->rec_descr; - struct etrax_recv_buffer *buffer; - int i; - - /* Set up the receiving descriptors */ - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { - buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); - if (!buffer) - panic("%s: Failed to allocate memory for receive buffer!\n", __func__); - - descr[i].ctrl = d_int; - descr[i].buf = virt_to_phys(buffer->buffer); - descr[i].sw_len = SERIAL_DESCR_BUF_SIZE; - descr[i].hw_len = 0; - descr[i].status = 0; - descr[i].next = virt_to_phys(&descr[i+1]); - } - - /* Link the last descriptor to the first */ - descr[i-1].next = virt_to_phys(&descr[0]); - - /* Start with the first descriptor in the list */ - info->cur_rec_descr = 0; - - /* Start the DMA */ - *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]); - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); - - /* Input DMA should be running now */ - return 1; -} - -static void -start_receive(struct e100_serial *info) -{ - if (info->uses_dma_in) { - /* reset the input dma channel to be sure it works */ - - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - start_recv_dma(info); - } -} - - -/* the bits in the MASK2 register are laid out like this: - DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR - where I is the input channel and O is the output channel for the port. - info->irq is the bit number for the DMAO_DESCR so to check the others we - shift info->irq to the left. -*/ - -/* dma output channel interrupt handler - this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or - DMA8(ser1) when they have finished a descriptor with the intr flag set. -*/ - -static irqreturn_t -tr_interrupt(int irq, void *dev_id) -{ - struct e100_serial *info; - unsigned long ireg; - int i; - int handled = 0; - - /* find out the line that caused this irq and get it from rs_table */ - - ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (!info->enabled || !info->uses_dma_out) - continue; - /* check for dma_descr (don't need to check for dma_eop in output dma for serial */ - if (ireg & info->irq) { - handled = 1; - /* we can send a new dma bunch. make it so. */ - DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i)); - /* Read jiffies_usec first, - * we want this time to be as late as possible - */ - info->last_tx_active_usec = GET_JIFFIES_USEC(); - info->last_tx_active = jiffies; - transmit_chars_dma(info); - } - - /* FIXME: here we should really check for a change in the - status lines and if so call status_handle(info) */ - } - return IRQ_RETVAL(handled); -} /* tr_interrupt */ - -/* dma input channel interrupt handler */ - -static irqreturn_t -rec_interrupt(int irq, void *dev_id) -{ - struct e100_serial *info; - unsigned long ireg; - int i; - int handled = 0; - - /* find out the line that caused this irq and get it from rs_table */ - - ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (!info->enabled || !info->uses_dma_in) - continue; - /* check for both dma_eop and dma_descr for the input dma channel */ - if (ireg & ((info->irq << 2) | (info->irq << 3))) { - handled = 1; - /* we have received something */ - receive_chars_dma(info); - } - - /* FIXME: here we should really check for a change in the - status lines and if so call status_handle(info) */ - } - return IRQ_RETVAL(handled); -} /* rec_interrupt */ - -static int force_eop_if_needed(struct e100_serial *info) -{ - /* We check data_avail bit to determine if data has - * arrived since last time - */ - unsigned char rstat = info->ioport[REG_STATUS]; - - /* error or datavail? */ - if (rstat & SER_ERROR_MASK) { - /* Some error has occurred. If there has been valid data, an - * EOP interrupt will be made automatically. If no data, the - * normal ser_interrupt should be enabled and handle it. - * So do nothing! - */ - DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n", - rstat | (info->line << 8)); - return 0; - } - - if (rstat & SER_DATA_AVAIL_MASK) { - /* Ok data, no error, count it */ - TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", - rstat | (info->line << 8))); - /* Read data to clear status flags */ - (void)info->ioport[REG_DATA]; - - info->forced_eop = 0; - START_FLUSH_FAST_TIMER(info, "magic"); - return 0; - } - - /* hit the timeout, force an EOP for the input - * dma channel if we haven't already - */ - if (!info->forced_eop) { - info->forced_eop = 1; - TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); - FORCE_EOP(info); - } - - return 1; -} - -static void flush_to_flip_buffer(struct e100_serial *info) -{ - struct etrax_recv_buffer *buffer; - unsigned long flags; - - local_irq_save(flags); - - while ((buffer = info->first_recv_buffer) != NULL) { - unsigned int count = buffer->length; - - tty_insert_flip_string(&info->port, buffer->buffer, count); - info->recv_cnt -= count; - - if (count == buffer->length) { - info->first_recv_buffer = buffer->next; - kfree(buffer); - } else { - buffer->length -= count; - memmove(buffer->buffer, buffer->buffer + count, buffer->length); - buffer->error = TTY_NORMAL; - } - } - - if (!info->first_recv_buffer) - info->last_recv_buffer = NULL; - - local_irq_restore(flags); - - /* This includes a check for low-latency */ - tty_flip_buffer_push(&info->port); -} - -static void check_flush_timeout(struct e100_serial *info) -{ - /* Flip what we've got (if we can) */ - flush_to_flip_buffer(info); - - /* We might need to flip later, but not to fast - * since the system is busy processing input... */ - if (info->first_recv_buffer) - START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000); - - /* Force eop last, since data might have come while we're processing - * and if we started the slow timer above, we won't start a fast - * below. - */ - force_eop_if_needed(info); -} - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static void flush_timeout_function(unsigned long data) -{ - struct e100_serial *info = (struct e100_serial *)data; - - fast_timers[info->line].function = NULL; - serial_fast_timer_expired++; - TIMERD(DEBUG_LOG(info->line, "flush_timeout %i ", info->line)); - TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); - check_flush_timeout(info); -} - -#else - -/* dma fifo/buffer timeout handler - forces an end-of-packet for the dma input channel if no chars - have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s. -*/ - -static struct timer_list flush_timer; - -static void -timed_flush_handler(struct timer_list *unused) -{ - struct e100_serial *info; - int i; - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (info->uses_dma_in) - check_flush_timeout(info); - } - - /* restart flush timer */ - mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); -} -#endif - -#ifdef SERIAL_HANDLE_EARLY_ERRORS - -/* If there is an error (ie break) when the DMA is running and - * there are no bytes in the fifo the DMA is stopped and we get no - * eop interrupt. Thus we have to monitor the first bytes on a DMA - * transfer, and if it is without error we can turn the serial - * interrupts off. - */ - -/* -BREAK handling on ETRAX 100: -ETRAX will generate interrupt although there is no stop bit between the -characters. - -Depending on how long the break sequence is, the end of the breaksequence -will look differently: -| indicates start/end of a character. - -B= Break character (0x00) with framing error. -E= Error byte with parity error received after B characters. -F= "Faked" valid byte received immediately after B characters. -V= Valid byte - -1. - B BL ___________________________ V -.._|__________|__________| |valid data | - -Multiple frame errors with data == 0x00 (B), -the timing matches up "perfectly" so no extra ending char is detected. -The RXD pin is 1 in the last interrupt, in that case -we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really -know if another byte will come and this really is case 2. below -(e.g F=0xFF or 0xFE) -If RXD pin is 0 we can expect another character (see 2. below). - - -2. - - B B E or F__________________..__ V -.._|__________|__________|______ | |valid data - "valid" or - parity error - -Multiple frame errors with data == 0x00 (B), -but the part of the break trigs is interpreted as a start bit (and possibly -some 0 bits followed by a number of 1 bits and a stop bit). -Depending on parity settings etc. this last character can be either -a fake "valid" char (F) or have a parity error (E). - -If the character is valid it will be put in the buffer, -we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt -will set the flags so the tty will handle it, -if it's an error byte it will not be put in the buffer -and we set info->errorcode = ERRCODE_INSERT_BREAK. - -To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp -of the last faulty char (B) and compares it with the current time: -If the time elapsed time is less then 2*char_time_usec we will assume -it's a faked F char and not a Valid char and set -info->errorcode = ERRCODE_SET_BREAK. - -Flaws in the above solution: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -We use the timer to distinguish a F character from a V character, -if a V character is to close after the break we might make the wrong decision. - -TODO: The break will be delayed until an F or V character is received. - -*/ - -static void handle_ser_rx_interrupt_no_dma(struct e100_serial *info) -{ - unsigned long data_read; - - /* Read data and status at the same time */ - data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); -more_data: - if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); - } - DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read))); - - if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) | - IO_MASK(R_SERIAL0_READ, par_err) | - IO_MASK(R_SERIAL0_READ, overrun) )) { - /* An error */ - info->last_rx_active_usec = GET_JIFFIES_USEC(); - info->last_rx_active = jiffies; - DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read)); - DLOG_INT_TRIG( - if (!log_int_trig1_pos) { - log_int_trig1_pos = log_int_pos; - log_int(rdpc(), 0, 0); - } - ); - - - if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) && - (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) { - /* Most likely a break, but we get interrupts over and - * over again. - */ - - if (!info->break_detected_cnt) { - DEBUG_LOG(info->line, "#BRK start\n", 0); - } - if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) { - /* The RX pin is high now, so the break - * must be over, but.... - * we can't really know if we will get another - * last byte ending the break or not. - * And we don't know if the byte (if any) will - * have an error or look valid. - */ - DEBUG_LOG(info->line, "# BL BRK\n", 0); - info->errorcode = ERRCODE_INSERT_BREAK; - } - info->break_detected_cnt++; - } else { - /* The error does not look like a break, but could be - * the end of one - */ - if (info->break_detected_cnt) { - DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); - info->errorcode = ERRCODE_INSERT_BREAK; - } else { - unsigned char data = IO_EXTRACT(R_SERIAL0_READ, - data_in, data_read); - char flag = TTY_NORMAL; - if (info->errorcode == ERRCODE_INSERT_BREAK) { - tty_insert_flip_char(&info->port, 0, flag); - info->icount.rx++; - } - - if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { - info->icount.parity++; - flag = TTY_PARITY; - } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { - info->icount.overrun++; - flag = TTY_OVERRUN; - } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { - info->icount.frame++; - flag = TTY_FRAME; - } - tty_insert_flip_char(&info->port, data, flag); - info->errorcode = 0; - } - info->break_detected_cnt = 0; - } - } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { - /* No error */ - DLOG_INT_TRIG( - if (!log_int_trig1_pos) { - if (log_int_pos >= log_int_size) { - log_int_pos = 0; - } - log_int_trig0_pos = log_int_pos; - log_int(rdpc(), 0, 0); - } - ); - tty_insert_flip_char(&info->port, - IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), - TTY_NORMAL); - } else { - DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); - } - - - info->icount.rx++; - data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); - if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { - DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); - goto more_data; - } - - tty_flip_buffer_push(&info->port); -} - -static void handle_ser_rx_interrupt(struct e100_serial *info) -{ - unsigned char rstat; - -#ifdef SERIAL_DEBUG_INTR - printk("Interrupt from serport %d\n", i); -#endif -/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */ - if (!info->uses_dma_in) { - handle_ser_rx_interrupt_no_dma(info); - return; - } - /* DMA is used */ - rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); - } - - if (rstat & SER_ERROR_MASK) { - unsigned char data; - - info->last_rx_active_usec = GET_JIFFIES_USEC(); - info->last_rx_active = jiffies; - /* If we got an error, we must reset it by reading the - * data_in field - */ - data = info->ioport[REG_DATA]; - DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); - DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); - if (!data && (rstat & SER_FRAMING_ERR_MASK)) { - /* Most likely a break, but we get interrupts over and - * over again. - */ - - if (!info->break_detected_cnt) { - DEBUG_LOG(info->line, "#BRK start\n", 0); - } - if (rstat & SER_RXD_MASK) { - /* The RX pin is high now, so the break - * must be over, but.... - * we can't really know if we will get another - * last byte ending the break or not. - * And we don't know if the byte (if any) will - * have an error or look valid. - */ - DEBUG_LOG(info->line, "# BL BRK\n", 0); - info->errorcode = ERRCODE_INSERT_BREAK; - } - info->break_detected_cnt++; - } else { - /* The error does not look like a break, but could be - * the end of one - */ - if (info->break_detected_cnt) { - DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); - info->errorcode = ERRCODE_INSERT_BREAK; - } else { - if (info->errorcode == ERRCODE_INSERT_BREAK) { - info->icount.brk++; - add_char_and_flag(info, '\0', TTY_BREAK); - } - - if (rstat & SER_PAR_ERR_MASK) { - info->icount.parity++; - add_char_and_flag(info, data, TTY_PARITY); - } else if (rstat & SER_OVERRUN_MASK) { - info->icount.overrun++; - add_char_and_flag(info, data, TTY_OVERRUN); - } else if (rstat & SER_FRAMING_ERR_MASK) { - info->icount.frame++; - add_char_and_flag(info, data, TTY_FRAME); - } - - info->errorcode = 0; - } - info->break_detected_cnt = 0; - DEBUG_LOG(info->line, "#iERR s d %04X\n", - ((rstat & SER_ERROR_MASK) << 8) | data); - } - } else { /* It was a valid byte, now let the DMA do the rest */ - unsigned long curr_time_u = GET_JIFFIES_USEC(); - unsigned long curr_time = jiffies; - - if (info->break_detected_cnt) { - /* Detect if this character is a new valid char or the - * last char in a break sequence: If LSBits are 0 and - * MSBits are high AND the time is close to the - * previous interrupt we should discard it. - */ - long elapsed_usec = - (curr_time - info->last_rx_active) * (1000000/HZ) + - curr_time_u - info->last_rx_active_usec; - if (elapsed_usec < 2*info->char_time_usec) { - DEBUG_LOG(info->line, "FBRK %i\n", info->line); - /* Report as BREAK (error) and let - * receive_chars_dma() handle it - */ - info->errorcode = ERRCODE_SET_BREAK; - } else { - DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line); - } - DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt); - } - -#ifdef SERIAL_DEBUG_INTR - printk("** OK, disabling ser_interrupts\n"); -#endif - e100_disable_serial_data_irq(info); - DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); - info->break_detected_cnt = 0; - - } - /* Restarting the DMA never hurts */ - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); - START_FLUSH_FAST_TIMER(info, "ser_int"); -} /* handle_ser_rx_interrupt */ - -static void handle_ser_tx_interrupt(struct e100_serial *info) -{ - unsigned long flags; - - if (info->x_char) { - unsigned char rstat; - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); - local_irq_save(flags); - rstat = info->ioport[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - - info->ioport[REG_TR_DATA] = info->x_char; - info->icount.tx++; - info->x_char = 0; - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); - local_irq_restore(flags); - return; - } - if (info->uses_dma_out) { - unsigned char rstat; - int i; - /* We only use normal tx interrupt when sending x_char */ - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); - local_irq_save(flags); - rstat = info->ioport[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - e100_disable_serial_tx_ready_irq(info); - if (info->port.tty->stopped) - rs_stop(info->port.tty); - /* Enable the DMA channel and tell it to continue */ - e100_enable_txdma_channel(info); - /* Wait 12 cycles before doing the DMA command */ - for(i = 6; i > 0; i--) - nop(); - - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); - local_irq_restore(flags); - return; - } - /* Normal char-by-char interrupt */ - if (info->xmit.head == info->xmit.tail - || info->port.tty->stopped) { - DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", - info->port.tty->stopped)); - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - return; - } - DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); - /* Send a byte, rs485 timing is critical so turn of ints */ - local_irq_save(flags); - info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; - info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); - info->icount.tx++; - if (info->xmit.head == info->xmit.tail) { -#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.flags & SER_RS485_ENABLED) { - /* Set a short timer to toggle RTS */ - start_one_shot_timer(&fast_timers_rs485[info->line], - rs485_toggle_rts_timer_function, - (unsigned long)info, - info->char_time_usec*2, - "RS-485"); - } -#endif /* RS485 */ - info->last_tx_active_usec = GET_JIFFIES_USEC(); - info->last_tx_active = jiffies; - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0)); - } else { - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); - } - local_irq_restore(flags); - - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - -} /* handle_ser_tx_interrupt */ - -/* result of time measurements: - * RX duration 54-60 us when doing something, otherwise 6-9 us - * ser_int duration: just sending: 8-15 us normally, up to 73 us - */ -static irqreturn_t -ser_interrupt(int irq, void *dev_id) -{ - static volatile int tx_started = 0; - struct e100_serial *info; - int i; - unsigned long flags; - unsigned long irq_mask1_rd; - unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */ - int handled = 0; - static volatile unsigned long reentered_ready_mask = 0; - - local_irq_save(flags); - irq_mask1_rd = *R_IRQ_MASK1_RD; - /* First handle all rx interrupts with ints disabled */ - info = rs_table; - irq_mask1_rd &= e100_ser_int_mask; - for (i = 0; i < NR_PORTS; i++) { - /* Which line caused the data irq? */ - if (irq_mask1_rd & data_mask) { - handled = 1; - handle_ser_rx_interrupt(info); - } - info += 1; - data_mask <<= 2; - } - /* Handle tx interrupts with interrupts enabled so we - * can take care of new data interrupts while transmitting - * We protect the tx part with the tx_started flag. - * We disable the tr_ready interrupts we are about to handle and - * unblock the serial interrupt so new serial interrupts may come. - * - * If we get a new interrupt: - * - it migth be due to synchronous serial ports. - * - serial irq will be blocked by general irq handler. - * - async data will be handled above (sync will be ignored). - * - tx_started flag will prevent us from trying to send again and - * we will exit fast - no need to unblock serial irq. - * - Next (sync) serial interrupt handler will be runned with - * disabled interrupt due to restore_flags() at end of function, - * so sync handler will not be preempted or reentered. - */ - if (!tx_started) { - unsigned long ready_mask; - unsigned long - tx_started = 1; - /* Only the tr_ready interrupts left */ - irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); - while (irq_mask1_rd) { - /* Disable those we are about to handle */ - *R_IRQ_MASK1_CLR = irq_mask1_rd; - /* Unblock the serial interrupt */ - *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); - - local_irq_enable(); - ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ - info = rs_table; - for (i = 0; i < NR_PORTS; i++) { - /* Which line caused the ready irq? */ - if (irq_mask1_rd & ready_mask) { - handled = 1; - handle_ser_tx_interrupt(info); - } - info += 1; - ready_mask <<= 2; - } - /* handle_ser_tx_interrupt enables tr_ready interrupts */ - local_irq_disable(); - /* Handle reentered TX interrupt */ - irq_mask1_rd = reentered_ready_mask; - } - local_irq_disable(); - tx_started = 0; - } else { - unsigned long ready_mask; - ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); - if (ready_mask) { - reentered_ready_mask |= ready_mask; - /* Disable those we are about to handle */ - *R_IRQ_MASK1_CLR = ready_mask; - DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask)); - } - } - - local_irq_restore(flags); - return IRQ_RETVAL(handled); -} /* ser_interrupt */ -#endif - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using rs_sched_event(), and they get done here. - */ -static void -do_softint(struct work_struct *work) -{ - struct e100_serial *info; - struct tty_struct *tty; - - info = container_of(work, struct e100_serial, work); - - tty = info->port.tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - -static int -startup(struct e100_serial * info) -{ - unsigned long flags; - unsigned long xmit_page; - int i; - - xmit_page = get_zeroed_page(GFP_KERNEL); - if (!xmit_page) - return -ENOMEM; - - local_irq_save(flags); - - /* if it was already initialized, skip this */ - - if (tty_port_initialized(&info->port)) { - local_irq_restore(flags); - free_page(xmit_page); - return 0; - } - - if (info->xmit.buf) - free_page(xmit_page); - else - info->xmit.buf = (unsigned char *) xmit_page; - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); -#endif - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in change_speed()) - */ - - /* - * Reset the DMA channels and make sure their interrupts are cleared - */ - - if (info->dma_in_enabled) { - info->uses_dma_in = 1; - e100_enable_rxdma_channel(info); - - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - - /* Wait until reset cycle is complete */ - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - /* Make sure the irqs are cleared */ - *info->iclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - } else { - e100_disable_rxdma_channel(info); - } - - if (info->dma_out_enabled) { - info->uses_dma_out = 1; - e100_enable_txdma_channel(info); - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - /* Make sure the irqs are cleared */ - *info->oclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - } else { - e100_disable_txdma_channel(info); - } - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->xmit.head = info->xmit.tail = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - info->rec_descr[i].buf = 0; - - /* - * and set the speed and other flags of the serial port - * this will start the rx/tx as well - */ -#ifdef SERIAL_HANDLE_EARLY_ERRORS - e100_enable_serial_data_irq(info); -#endif - change_speed(info); - - /* dummy read to reset any serial errors */ - - (void)info->ioport[REG_DATA]; - - /* enable the interrupts */ - if (info->uses_dma_out) - e100_enable_txdma_irq(info); - - e100_enable_rx_irq(info); - - info->tr_running = 0; /* to be sure we don't lock up the transmitter */ - - /* setup the dma input descriptor and start dma */ - - start_receive(info); - - /* for safety, make sure the descriptors last result is 0 bytes written */ - - info->tr_descr.sw_len = 0; - info->tr_descr.hw_len = 0; - info->tr_descr.status = 0; - - /* enable RTS/DTR last */ - - e100_rts(info, 1); - e100_dtr(info, 1); - - tty_port_set_initialized(&info->port, 1); - - local_irq_restore(flags); - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void -shutdown(struct e100_serial * info) -{ - unsigned long flags; - struct etrax_dma_descr *descr = info->rec_descr; - struct etrax_recv_buffer *buffer; - int i; - - /* shut down the transmitter and receiver */ - DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); - e100_disable_rx(info); - info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); - - /* disable interrupts, reset dma channels */ - if (info->uses_dma_in) { - e100_disable_rxdma_irq(info); - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - info->uses_dma_in = 0; - } else { - e100_disable_serial_data_irq(info); - } - - if (info->uses_dma_out) { - e100_disable_txdma_irq(info); - info->tr_running = 0; - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - info->uses_dma_out = 0; - } else { - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - } - - if (!tty_port_initialized(&info->port)) - return; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....\n", info->line, - info->irq); -#endif - - local_irq_save(flags); - - if (info->xmit.buf) { - free_page((unsigned long)info->xmit.buf); - info->xmit.buf = NULL; - } - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - if (descr[i].buf) { - buffer = phys_to_virt(descr[i].buf) - sizeof *buffer; - kfree(buffer); - descr[i].buf = 0; - } - - if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) { - /* hang up DTR and RTS if HUPCL is enabled */ - e100_dtr(info, 0); - e100_rts(info, 0); /* could check CRTSCTS before doing this */ - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - tty_port_set_initialized(&info->port, 0); - local_irq_restore(flags); -} - - -/* change baud rate and other assorted parameters */ - -static void -change_speed(struct e100_serial *info) -{ - unsigned int cflag; - unsigned long xoff; - unsigned long flags; - /* first some safety checks */ - - if (!info->port.tty) - return; - if (!info->ioport) - return; - - cflag = info->port.tty->termios.c_cflag; - - /* possibly, the tx/rx should be disabled first to do this safely */ - - /* change baud-rate and write it to the hardware */ - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { - /* Special baudrate */ - u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ - unsigned long alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); - /* R_ALT_SER_BAUDRATE selects the source */ - DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n", - (unsigned long)info->baud_base, info->custom_divisor)); - if (info->baud_base == SERIAL_PRESCALE_BASE) { - /* 0, 2-65535 (0=65536) */ - u16 divisor = info->custom_divisor; - /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */ - /* baudrate is 3.125MHz/custom_divisor */ - alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale); - alt_source = 0x11; - DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor)); - *R_SERIAL_PRESCALE = divisor; - info->baud = SERIAL_PRESCALE_BASE/divisor; - } - else - { - /* Bad baudbase, we don't support using timer0 - * for baudrate. - */ - printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n", - (unsigned long)info->baud_base, info->custom_divisor); - } - r_alt_ser_baudrate_shadow &= ~mask; - r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); - *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; - } else { - /* Normal baudrate */ - /* Make sure we use normal baudrate */ - u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ - unsigned long alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); - r_alt_ser_baudrate_shadow &= ~mask; - r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); - *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; - - info->baud = cflag_to_baud(cflag); - info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); - } - - /* start with default settings and then fill in changes */ - local_irq_save(flags); - /* 8 bit, no/even parity */ - info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | - IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | - IO_MASK(R_SERIAL0_REC_CTRL, rec_par)); - - /* 8 bit, no/even parity, 1 stop bit, no cts */ - info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) | - IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) | - IO_MASK(R_SERIAL0_TR_CTRL, tr_par) | - IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) | - IO_MASK(R_SERIAL0_TR_CTRL, auto_cts)); - - if ((cflag & CSIZE) == CS7) { - /* set 7 bit mode */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); - } - - if (cflag & CSTOPB) { - /* set 2 stop bit mode */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits); - } - - if (cflag & PARENB) { - /* enable parity */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); - } - - if (cflag & CMSPAR) { - /* enable stick parity, PARODD mean Mark which matches ETRAX */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick); - } - if (cflag & PARODD) { - /* set odd parity (or Mark if CMSPAR) */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd); - } - - if (cflag & CRTSCTS) { - /* enable automatic CTS handling */ - DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0)); - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active); - } - - /* make sure the tx and rx are enabled */ - - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); - - /* actually write the control regs to the hardware */ - - info->ioport[REG_TR_CTRL] = info->tx_ctrl; - info->ioport[REG_REC_CTRL] = info->rx_ctrl; - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (info->port.tty->termios.c_iflag & IXON ) { - DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", - STOP_CHAR(info->port.tty))); - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - } - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - local_irq_restore(flags); - - update_char_time(info); - -} /* change_speed */ - -/* start transmitting chars NOW */ - -static void -rs_flush_chars(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (info->tr_running || - info->xmit.head == info->xmit.tail || - tty->stopped || - !info->xmit.buf) - return; - -#ifdef SERIAL_DEBUG_FLOW - printk("rs_flush_chars\n"); -#endif - - /* this protection might not exactly be necessary here */ - - local_irq_save(flags); - start_transmit(info); - local_irq_restore(flags); -} - -static int rs_raw_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - /* first some sanity checks */ - - if (!info->xmit.buf) - return 0; - -#ifdef SERIAL_DEBUG_DATA - if (info->line == SERIAL_DEBUG_LINE) - printk("rs_raw_write (%d), status %d\n", - count, info->ioport[REG_STATUS]); -#endif - - local_save_flags(flags); - DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); - DFLOW(DEBUG_LOG(info->line, "ldisc\n")); - - - /* The local_irq_disable/restore_flags pairs below are needed - * because the DMA interrupt handler moves the info->xmit values. - * the memcpy needs to be in the critical region unfortunately, - * because we need to read xmit values, memcpy, write xmit values - * in one atomic operation... this could perhaps be avoided by - * more clever design. - */ - local_irq_disable(); - while (count) { - c = CIRC_SPACE_TO_END(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE); - - if (count < c) - c = count; - if (c <= 0) - break; - - memcpy(info->xmit.buf + info->xmit.head, buf, c); - info->xmit.head = (info->xmit.head + c) & - (SERIAL_XMIT_SIZE-1); - buf += c; - count -= c; - ret += c; - } - local_irq_restore(flags); - - /* enable transmitter if not running, unless the tty is stopped - * this does not need IRQ protection since if tr_running == 0 - * the IRQ's are not running anyway for this port. - */ - DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret)); - - if (info->xmit.head != info->xmit.tail && - !tty->stopped && - !info->tr_running) { - start_transmit(info); - } - - return ret; -} /* raw_raw_write() */ - -static int -rs_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ -#if defined(CONFIG_ETRAX_RS485) - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - if (info->rs485.flags & SER_RS485_ENABLED) - { - /* If we are in RS-485 mode, we need to toggle RTS and disable - * the receiver before initiating a DMA transfer - */ -#ifdef CONFIG_ETRAX_FAST_TIMER - /* Abort any started timer */ - fast_timers_rs485[info->line].function = NULL; - del_fast_timer(&fast_timers_rs485[info->line]); -#endif - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND)); -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_disable_rx(info); - e100_enable_rx_irq(info); -#endif - if (info->rs485.delay_rts_before_send > 0) - msleep(info->rs485.delay_rts_before_send); - } -#endif /* CONFIG_ETRAX_RS485 */ - - count = rs_raw_write(tty, buf, count); - -#if defined(CONFIG_ETRAX_RS485) - if (info->rs485.flags & SER_RS485_ENABLED) - { - unsigned int val; - /* If we are in RS-485 mode the following has to be done: - * wait until DMA is ready - * wait on transmit shift register - * toggle RTS - * enable the receiver - */ - - /* Sleep until all sent */ - tty_wait_until_sent(tty, 0); -#ifdef CONFIG_ETRAX_FAST_TIMER - /* Now sleep a little more so that shift register is empty */ - schedule_usleep(info->char_time_usec * 2); -#endif - /* wait on transmit shift register */ - do{ - get_lsr_info(info, &val); - }while (!(val & TIOCSER_TEMT)); - - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); - -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_enable_rx(info); - e100_enable_rxdma_irq(info); -#endif - } -#endif /* CONFIG_ETRAX_RS485 */ - - return count; -} /* rs_write */ - - -/* how much space is available in the xmit buffer? */ - -static int -rs_write_room(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -/* How many chars are in the xmit buffer? - * This does not include any chars in the transmitter FIFO. - * Use wait_until_sent for waiting for FIFO drain. - */ - -static int -rs_chars_in_buffer(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -/* discard everything in the xmit buffer */ - -static void -rs_flush_buffer(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - local_irq_save(flags); - info->xmit.head = info->xmit.tail = 0; - local_irq_restore(flags); - - tty_wakeup(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - * - * Since we use DMA we don't check for info->x_char in transmit_chars_dma(), - * but we do it in handle_ser_tx_interrupt(). - * We disable DMA channel and enable tx ready interrupt and write the - * character when possible. - */ -static void rs_send_xchar(struct tty_struct *tty, char ch) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - local_irq_save(flags); - if (info->uses_dma_out) { - /* Put the DMA on hold and disable the channel */ - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) != - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold)); - e100_disable_txdma_channel(info); - } - - /* Must make sure transmitter is not stopped before we can transmit */ - if (tty->stopped) - rs_start(tty); - - /* Enable manual transmit interrupt and send from there */ - DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); - info->x_char = ch; - e100_enable_serial_tx_ready_irq(info); - local_irq_restore(flags); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void -rs_throttle(struct tty_struct * tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - printk("throttle %s ....\n", tty_name(tty)); -#endif - DFLOW(DEBUG_LOG(info->line,"rs_throttle\n")); - - /* Do RTS before XOFF since XOFF might take some time */ - if (C_CRTSCTS(tty)) { - /* Turn off RTS line */ - e100_rts(info, 0); - } - if (I_IXOFF(tty)) - rs_send_xchar(tty, STOP_CHAR(tty)); - -} - -static void -rs_unthrottle(struct tty_struct * tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - printk("unthrottle %s ....\n", tty_name(tty)); -#endif - DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc\n")); - DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); - /* Do RTS before XOFF since XOFF might take some time */ - if (C_CRTSCTS(tty)) { - /* Assert RTS line */ - e100_rts(info, 1); - } - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_send_xchar(tty, START_CHAR(tty)); - } - -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int -get_serial_info(struct e100_serial * info, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - - /* this is all probably wrong, there are a lot of fields - * here that we don't have in e100_serial and maybe we - * should set them to something else than 0. - */ - - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = (int)info->ioport; - tmp.irq = info->irq; - tmp.flags = info->port.flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->port.close_delay; - tmp.closing_wait = info->port.closing_wait; - tmp.custom_divisor = info->custom_divisor; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int -set_serial_info(struct e100_serial *info, - struct serial_struct *new_info) -{ - struct serial_struct new_serial; - struct e100_serial old_info; - int retval = 0; - - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.type != info->type) || - (new_serial.close_delay != info->port.close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (info->port.flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - goto check_and_exit; - } - - if (info->port.count > 1) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud_base = new_serial.baud_base; - info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->custom_divisor = new_serial.custom_divisor; - info->type = new_serial.type; - info->port.close_delay = new_serial.close_delay; - info->port.closing_wait = new_serial.closing_wait; - info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - check_and_exit: - if (tty_port_initialized(&info->port)) - change_speed(info); - else - retval = startup(info); - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int -get_lsr_info(struct e100_serial * info, unsigned int *value) -{ - unsigned int result = TIOCSER_TEMT; - unsigned long curr_time = jiffies; - unsigned long curr_time_usec = GET_JIFFIES_USEC(); - unsigned long elapsed_usec = - (curr_time - info->last_tx_active) * 1000000/HZ + - curr_time_usec - info->last_tx_active_usec; - - if (info->xmit.head != info->xmit.tail || - elapsed_usec < 2*info->char_time_usec) { - result = 0; - } - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -#ifdef SERIAL_DEBUG_IO -struct state_str -{ - int state; - const char *str; -}; - -const struct state_str control_state_str[] = { - {TIOCM_DTR, "DTR" }, - {TIOCM_RTS, "RTS"}, - {TIOCM_ST, "ST?" }, - {TIOCM_SR, "SR?" }, - {TIOCM_CTS, "CTS" }, - {TIOCM_CD, "CD" }, - {TIOCM_RI, "RI" }, - {TIOCM_DSR, "DSR" }, - {0, NULL } -}; - -char *get_control_state_str(int MLines, char *s) -{ - int i = 0; - - s[0]='\0'; - while (control_state_str[i].str != NULL) { - if (MLines & control_state_str[i].state) { - if (s[0] != '\0') { - strcat(s, ", "); - } - strcat(s, control_state_str[i].str); - } - i++; - } - return s; -} -#endif - -static int -rs_break(struct tty_struct *tty, int break_state) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (!info->ioport) - return -EIO; - - local_irq_save(flags); - if (break_state == -1) { - /* Go to manual mode and set the txd pin to 0 */ - /* Clear bit 7 (txd) and 6 (tr_enable) */ - info->tx_ctrl &= 0x3F; - } else { - /* Set bit 7 (txd) and 6 (tr_enable) */ - info->tx_ctrl |= (0x80 | 0x40); - } - info->ioport[REG_TR_CTRL] = info->tx_ctrl; - local_irq_restore(flags); - return 0; -} - -static int -rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - local_irq_save(flags); - - if (clear & TIOCM_RTS) - e100_rts(info, 0); - if (clear & TIOCM_DTR) - e100_dtr(info, 0); - /* Handle FEMALE behaviour */ - if (clear & TIOCM_RI) - e100_ri_out(info, 0); - if (clear & TIOCM_CD) - e100_cd_out(info, 0); - - if (set & TIOCM_RTS) - e100_rts(info, 1); - if (set & TIOCM_DTR) - e100_dtr(info, 1); - /* Handle FEMALE behaviour */ - if (set & TIOCM_RI) - e100_ri_out(info, 1); - if (set & TIOCM_CD) - e100_cd_out(info, 1); - - local_irq_restore(flags); - return 0; -} - -static int -rs_tiocmget(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned int result; - unsigned long flags; - - local_irq_save(flags); - - result = - (!E100_RTS_GET(info) ? TIOCM_RTS : 0) - | (!E100_DTR_GET(info) ? TIOCM_DTR : 0) - | (!E100_RI_GET(info) ? TIOCM_RNG : 0) - | (!E100_DSR_GET(info) ? TIOCM_DSR : 0) - | (!E100_CD_GET(info) ? TIOCM_CAR : 0) - | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); - - local_irq_restore(flags); - -#ifdef SERIAL_DEBUG_IO - printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n", - info->line, result, result); - { - char s[100]; - - get_control_state_str(result, s); - printk(KERN_DEBUG "state: %s\n", s); - } -#endif - return result; - -} - - -static int -rs_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { - if (tty_io_error(tty)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); - - case TIOCSERGSTRUCT: - if (copy_to_user((struct e100_serial *) arg, - info, sizeof(struct e100_serial))) - return -EFAULT; - return 0; - -#if defined(CONFIG_ETRAX_RS485) - case TIOCSERSETRS485: - { - /* In this ioctl we still use the old structure - * rs485_control for backward compatibility - * (if we use serial_rs485, then old user-level code - * wouldn't work anymore...). - * The use of this ioctl is deprecated: use TIOCSRS485 - * instead.*/ - struct rs485_control rs485ctrl; - struct serial_rs485 rs485data; - printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n"); - if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, - sizeof(rs485ctrl))) - return -EFAULT; - - rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; - rs485data.flags = 0; - - if (rs485ctrl.enabled) - rs485data.flags |= SER_RS485_ENABLED; - else - rs485data.flags &= ~(SER_RS485_ENABLED); - - if (rs485ctrl.rts_on_send) - rs485data.flags |= SER_RS485_RTS_ON_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_ON_SEND); - - if (rs485ctrl.rts_after_sent) - rs485data.flags |= SER_RS485_RTS_AFTER_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND); - - return e100_enable_rs485(tty, &rs485data); - } - - case TIOCSRS485: - { - /* This is the new version of TIOCSRS485, with new - * data structure serial_rs485 */ - struct serial_rs485 rs485data; - if (copy_from_user(&rs485data, (struct rs485_control *)arg, - sizeof(rs485data))) - return -EFAULT; - - return e100_enable_rs485(tty, &rs485data); - } - - case TIOCGRS485: - { - struct serial_rs485 *rs485data = - &(((struct e100_serial *)tty->driver_data)->rs485); - /* This is the ioctl to get RS485 data from user-space */ - if (copy_to_user((struct serial_rs485 *) arg, - rs485data, - sizeof(struct serial_rs485))) - return -EFAULT; - break; - } - - case TIOCSERWRRS485: - { - struct rs485_write rs485wr; - if (copy_from_user(&rs485wr, (struct rs485_write *)arg, - sizeof(rs485wr))) - return -EFAULT; - - return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); - } -#endif - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void -rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - change_speed(info); - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) - rs_start(tty); - -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * S structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void -rs_close(struct tty_struct *tty, struct file * filp) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (!info) - return; - - /* interrupts are disabled for this entire function */ - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("[%d] rs_close ttyS%d, count = %d\n", current->pid, - info->line, info->count); -#endif - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR - "rs_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_ERR "rs_close: bad serial port count for ttyS%d: %d\n", - info->line, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - local_irq_restore(flags); - return; - } - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the serial receiver and the DMA receive interrupt. - */ -#ifdef SERIAL_HANDLE_EARLY_ERRORS - e100_disable_serial_data_irq(info); -#endif - - e100_disable_rx(info); - e100_disable_rx_irq(info); - - if (tty_port_initialized(&info->port)) { - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important as we have a transmit FIFO! - */ - rs_wait_until_sent(tty, HZ); - } - - shutdown(info); - rs_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; - if (info->port.blocked_open) { - if (info->port.close_delay) - schedule_timeout_interruptible(info->port.close_delay); - wake_up_interruptible(&info->port.open_wait); - } - local_irq_restore(flags); - tty_port_set_active(&info->port, 0); - - /* port closed */ - -#if defined(CONFIG_ETRAX_RS485) - if (info->rs485.flags & SER_RS485_ENABLED) { - info->rs485.flags &= ~(SER_RS485_ENABLED); -#if defined(CONFIG_ETRAX_RS485_ON_PA) - *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); -#endif - } -#endif - - /* - * Release any allocated DMA irq's. - */ - if (info->dma_in_enabled) { - free_irq(info->dma_in_irq_nbr, info); - cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); - info->uses_dma_in = 0; -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "DMA irq '%s' freed\n", - info->dma_in_irq_description); -#endif - } - if (info->dma_out_enabled) { - free_irq(info->dma_out_irq_nbr, info); - cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); - info->uses_dma_out = 0; -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "DMA irq '%s' freed\n", - info->dma_out_irq_description); -#endif - } -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_wait_until_sent(struct tty_struct *tty, int timeout) -{ - unsigned long orig_jiffies; - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long curr_time = jiffies; - unsigned long curr_time_usec = GET_JIFFIES_USEC(); - long elapsed_usec = - (curr_time - info->last_tx_active) * (1000000/HZ) + - curr_time_usec - info->last_tx_active_usec; - - /* - * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO - * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) - */ - orig_jiffies = jiffies; - while (info->xmit.head != info->xmit.tail || /* More in send queue */ - (*info->ostatusadr & 0x007f) || /* more in FIFO */ - (elapsed_usec < 2*info->char_time_usec)) { - schedule_timeout_interruptible(1); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - curr_time = jiffies; - curr_time_usec = GET_JIFFIES_USEC(); - elapsed_usec = - (curr_time - info->last_tx_active) * (1000000/HZ) + - curr_time_usec - info->last_tx_active_usec; - } - set_current_state(TASK_RUNNING); -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -void -rs_hangup(struct tty_struct *tty) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->port.count = 0; - tty_port_set_active(&info->port, 0); - info->port.tty = NULL; - wake_up_interruptible(&info->port.open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int -block_til_ready(struct tty_struct *tty, struct file * filp, - struct e100_serial *info) -{ - DECLARE_WAITQUEUE(wait, current); - unsigned long flags; - int retval; - int do_clocal = 0; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || tty_io_error(tty)) { - tty_port_set_active(&info->port, 1); - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->port.open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttyS%d, count = %d\n", - info->line, info->port.count); -#endif - local_irq_save(flags); - info->port.count--; - local_irq_restore(flags); - info->port.blocked_open++; - while (1) { - local_irq_save(flags); - /* assert RTS and DTR */ - e100_rts(info, 1); - e100_dtr(info, 1); - local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !tty_port_initialized(&info->port)) { -#ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (do_clocal) - /* && (do_clocal || DCD_IS_ASSERTED) */ - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttyS%d, count = %d\n", - info->line, info->port.count); -#endif - tty_unlock(tty); - schedule(); - tty_lock(tty); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->port.count++; - info->port.blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttyS%d, count = %d\n", - info->line, info->port.count); -#endif - if (retval) - return retval; - tty_port_set_active(&info->port, 1); - return 0; -} - -static void -deinit_port(struct e100_serial *info) -{ - if (info->dma_out_enabled) { - cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); - free_irq(info->dma_out_irq_nbr, info); - } - if (info->dma_in_enabled) { - cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); - free_irq(info->dma_in_irq_nbr, info); - } -} - -/* - * This routine is called whenever a serial port is opened. - * It performs the serial-specific initialization for the tty structure. - */ -static int -rs_open(struct tty_struct *tty, struct file * filp) -{ - struct e100_serial *info; - int retval; - int allocated_resources = 0; - - info = rs_table + tty->index; - if (!info->enabled) - return -ENODEV; - -#ifdef SERIAL_DEBUG_OPEN - printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name, - info->port.count); -#endif - - info->port.count++; - tty->driver_data = info; - info->port.tty = tty; - - info->port.low_latency = !!(info->port.flags & ASYNC_LOW_LATENCY); - - /* - * If DMA is enabled try to allocate the irq's. - */ - if (info->port.count == 1) { - allocated_resources = 1; - if (info->dma_in_enabled) { - if (request_irq(info->dma_in_irq_nbr, - rec_interrupt, - info->dma_in_irq_flags, - info->dma_in_irq_description, - info)) { - printk(KERN_WARNING "DMA irq '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_in_irq_description); - /* Make sure we never try to use DMA in */ - /* for the port again. */ - info->dma_in_enabled = 0; - } else if (cris_request_dma(info->dma_in_nbr, - info->dma_in_irq_description, - DMA_VERBOSE_ON_ERROR, - info->dma_owner)) { - free_irq(info->dma_in_irq_nbr, info); - printk(KERN_WARNING "DMA '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_in_irq_description); - /* Make sure we never try to use DMA in */ - /* for the port again. */ - info->dma_in_enabled = 0; - } -#ifdef SERIAL_DEBUG_OPEN - else - printk(KERN_DEBUG "DMA irq '%s' allocated\n", - info->dma_in_irq_description); -#endif - } - if (info->dma_out_enabled) { - if (request_irq(info->dma_out_irq_nbr, - tr_interrupt, - info->dma_out_irq_flags, - info->dma_out_irq_description, - info)) { - printk(KERN_WARNING "DMA irq '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_out_irq_description); - /* Make sure we never try to use DMA out */ - /* for the port again. */ - info->dma_out_enabled = 0; - } else if (cris_request_dma(info->dma_out_nbr, - info->dma_out_irq_description, - DMA_VERBOSE_ON_ERROR, - info->dma_owner)) { - free_irq(info->dma_out_irq_nbr, info); - printk(KERN_WARNING "DMA '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_out_irq_description); - /* Make sure we never try to use DMA out */ - /* for the port again. */ - info->dma_out_enabled = 0; - } -#ifdef SERIAL_DEBUG_OPEN - else - printk(KERN_DEBUG "DMA irq '%s' allocated\n", - info->dma_out_irq_description); -#endif - } - } - - /* - * Start up the serial port - */ - - retval = startup(info); - if (retval) { - if (allocated_resources) - deinit_port(info); - - /* FIXME Decrease count info->port.count here too? */ - return retval; - } - - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif - if (allocated_resources) - deinit_port(info); - - return retval; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open ttyS%d successful...\n", info->line); -#endif - DLOG_INT_TRIG( log_int_pos = 0); - - DFLIP( if (info->line == SERIAL_DEBUG_LINE) { - info->icount.rx = 0; - } ); - - return 0; -} - -#ifdef CONFIG_PROC_FS -/* - * /proc fs routines.... - */ - -static void seq_line_info(struct seq_file *m, struct e100_serial *info) -{ - unsigned long tmp; - - seq_printf(m, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); - - if (!info->ioport || (info->type == PORT_UNKNOWN)) { - seq_printf(m, "\n"); - return; - } - - seq_printf(m, " baud:%d", info->baud); - seq_printf(m, " tx:%lu rx:%lu", - (unsigned long)info->icount.tx, - (unsigned long)info->icount.rx); - tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) - seq_printf(m, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - - seq_printf(m, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); - -#if 1 - if (info->port.tty) { - if (info->port.tty->stopped) - seq_printf(m, " stopped:%i", - (int)info->port.tty->stopped); - } - - { - unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) - seq_printf(m, " xoff_detect:1"); - } - -#endif - - if (info->icount.frame) - seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); - - if (info->icount.parity) - seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); - - if (info->icount.brk) - seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); - - if (info->icount.overrun) - seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ - if (!E100_RTS_GET(info)) - seq_puts(m, "|RTS"); - if (!E100_CTS_GET(info)) - seq_puts(m, "|CTS"); - if (!E100_DTR_GET(info)) - seq_puts(m, "|DTR"); - if (!E100_DSR_GET(info)) - seq_puts(m, "|DSR"); - if (!E100_CD_GET(info)) - seq_puts(m, "|CD"); - if (!E100_RI_GET(info)) - seq_puts(m, "|RI"); - seq_puts(m, "\n"); -} - - -static int crisv10_proc_show(struct seq_file *m, void *v) -{ - int i; - - seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); - - for (i = 0; i < NR_PORTS; i++) { - if (!rs_table[i].enabled) - continue; - seq_line_info(m, &rs_table[i]); - } -#ifdef DEBUG_LOG_INCLUDED - for (i = 0; i < debug_log_pos; i++) { - seq_printf(m, "%-4i %lu.%lu ", - i, debug_log[i].time, - timer_data_to_ns(debug_log[i].timer_data)); - seq_printf(m, debug_log[i].string, debug_log[i].value); - } - seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); - debug_log_pos = 0; -#endif - return 0; -} - -static int crisv10_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, crisv10_proc_show, NULL); -} - -static const struct file_operations crisv10_proc_fops = { - .owner = THIS_MODULE, - .open = crisv10_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - - -/* Finally, routines used to initialize the serial driver. */ - -static void show_serial_version(void) -{ - printk(KERN_INFO - "ETRAX 100LX serial-driver %s, " - "(c) 2000-2004 Axis Communications AB\r\n", - &serial_version[11]); /* "$Revision: x.yy" */ -} - -/* rs_init inits the driver at boot (using the initcall chain) */ - -static const struct tty_operations rs_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = rs_hangup, - .break_ctl = rs_break, - .send_xchar = rs_send_xchar, - .wait_until_sent = rs_wait_until_sent, - .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset, -#ifdef CONFIG_PROC_FS - .proc_fops = &crisv10_proc_fops, -#endif -}; - -static int __init rs_init(void) -{ - int i; - struct e100_serial *info; - struct tty_driver *driver = alloc_tty_driver(NR_PORTS); - - if (!driver) - return -ENOMEM; - - show_serial_version(); - - /* Setup the timed flush handler system */ - -#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) - timer_setup(&flush_timer, timed_flush_handler, 0); - mod_timer(&flush_timer, jiffies + 5); -#endif - -#if defined(CONFIG_ETRAX_RS485) -#if defined(CONFIG_ETRAX_RS485_ON_PA) - if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit, - rs485_pa_bit)) { - printk(KERN_ERR "ETRAX100LX serial: Could not allocate " - "RS485 pin\n"); - put_tty_driver(driver); - return -EBUSY; - } -#endif -#endif - - /* Initialize the tty_driver structure */ - - driver->driver_name = "serial"; - driver->name = "ttyS"; - driver->major = TTY_MAJOR; - driver->minor_start = 64; - driver->type = TTY_DRIVER_TYPE_SERIAL; - driver->subtype = SERIAL_TYPE_NORMAL; - driver->init_termios = tty_std_termios; - driver->init_termios.c_cflag = - B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ - driver->init_termios.c_ispeed = 115200; - driver->init_termios.c_ospeed = 115200; - driver->flags = TTY_DRIVER_REAL_RAW; - - tty_set_operations(driver, &rs_ops); - serial_driver = driver; - - /* do some initializing for the separate ports */ - for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { - if (info->enabled) { - if (cris_request_io_interface(info->io_if, - info->io_if_description)) { - printk(KERN_ERR "ETRAX100LX async serial: " - "Could not allocate IO pins for " - "%s, port %d\n", - info->io_if_description, i); - info->enabled = 0; - } - } - tty_port_init(&info->port); - info->uses_dma_in = 0; - info->uses_dma_out = 0; - info->line = i; - info->port.tty = NULL; - info->type = PORT_ETRAX; - info->tr_running = 0; - info->forced_eop = 0; - info->baud_base = DEF_BAUD_BASE; - info->custom_divisor = 0; - info->x_char = 0; - info->event = 0; - info->xmit.buf = NULL; - info->xmit.tail = info->xmit.head = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - info->last_tx_active_usec = 0; - info->last_tx_active = 0; - -#if defined(CONFIG_ETRAX_RS485) - /* Set sane defaults */ - info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); - info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.delay_rts_before_send = 0; - info->rs485.flags &= ~(SER_RS485_ENABLED); -#endif - INIT_WORK(&info->work, do_softint); - - if (info->enabled) { - printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", - serial_driver->name, info->line, info->ioport); - } - tty_port_link_device(&info->port, driver, i); - } - - if (tty_register_driver(driver)) - panic("Couldn't register serial driver\n"); - -#ifdef CONFIG_ETRAX_FAST_TIMER -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER - memset(fast_timers, 0, sizeof(fast_timers)); -#endif -#ifdef CONFIG_ETRAX_RS485 - memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485)); -#endif - fast_timer_init(); -#endif - -#ifndef CONFIG_ETRAX_KGDB - /* Not needed in simulator. May only complicate stuff. */ - /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ - - if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, - IRQF_SHARED, "serial ", driver)) - panic("%s: Failed to request irq8", __func__); - -#endif - - return 0; -} - -/* this makes sure that rs_init is called during kernel boot */ -device_initcall(rs_init); diff --git a/drivers/tty/serial/crisv10.h b/drivers/tty/serial/crisv10.h deleted file mode 100644 index 79ba2bc95d3d..000000000000 --- a/drivers/tty/serial/crisv10.h +++ /dev/null @@ -1,133 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * serial.h: Arch-dep definitions for the Etrax100 serial driver. - * - * Copyright (C) 1998-2007 Axis Communications AB - */ - -#ifndef _ETRAX_SERIAL_H -#define _ETRAX_SERIAL_H - -#include <linux/circ_buf.h> -#include <asm/termios.h> -#include <asm/dma.h> -#include <arch/io_interface_mux.h> - -/* Software state per channel */ - -#ifdef __KERNEL__ -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -#define SERIAL_RECV_DESCRIPTORS 8 - -struct etrax_recv_buffer { - struct etrax_recv_buffer *next; - unsigned short length; - unsigned char error; - unsigned char pad; - - unsigned char buffer[0]; -}; - -struct e100_serial { - struct tty_port port; - int baud; - volatile u8 *ioport; /* R_SERIALx_CTRL */ - u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ - - /* Output registers */ - volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ - volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */ - volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */ - const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */ - - /* Input registers */ - volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ - volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */ - volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */ - volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */ - - u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */ - u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */ - u8 iseteop; /* bit number for R_SET_EOP for the input dma */ - int enabled; /* Set to 1 if the port is enabled in HW config */ - - u8 dma_out_enabled; /* Set to 1 if DMA should be used */ - u8 dma_in_enabled; /* Set to 1 if DMA should be used */ - - /* end of fields defined in rs_table[] in .c-file */ - int dma_owner; - unsigned int dma_in_nbr; - unsigned int dma_out_nbr; - unsigned int dma_in_irq_nbr; - unsigned int dma_out_irq_nbr; - unsigned long dma_in_irq_flags; - unsigned long dma_out_irq_flags; - char *dma_in_irq_description; - char *dma_out_irq_description; - - enum cris_io_interface io_if; - char *io_if_description; - - u8 uses_dma_in; /* Set to 1 if DMA is used */ - u8 uses_dma_out; /* Set to 1 if DMA is used */ - u8 forced_eop; /* a fifo eop has been forced */ - int baud_base; /* For special baudrates */ - int custom_divisor; /* For special baudrates */ - struct etrax_dma_descr tr_descr; - struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS]; - int cur_rec_descr; - - volatile int tr_running; /* 1 if output is running */ - - int x_char; /* xon/xoff character */ - unsigned long event; - int line; - int type; /* PORT_ETRAX */ - struct circ_buf xmit; - struct etrax_recv_buffer *first_recv_buffer; - struct etrax_recv_buffer *last_recv_buffer; - unsigned int recv_cnt; - unsigned int max_recv_cnt; - - struct work_struct work; - struct async_icount icount; /* error-statistics etc.*/ - - unsigned long char_time_usec; /* The time for 1 char, in usecs */ - unsigned long flush_time_usec; /* How often we should flush */ - unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */ - unsigned long last_tx_active; /* Last tx time in jiffies */ - unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */ - unsigned long last_rx_active; /* Last rx time in jiffies */ - - int break_detected_cnt; - int errorcode; - -#ifdef CONFIG_ETRAX_RS485 - struct serial_rs485 rs485; /* RS-485 support */ -#endif -}; - -/* this PORT is not in the standard serial.h. it's not actually used for - * anything since we only have one type of async serial-port anyway in this - * system. - */ - -#define PORT_ETRAX 1 - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define RS_EVENT_WRITE_WAKEUP 0 - -#endif /* __KERNEL__ */ - -#endif /* !_ETRAX_SERIAL_H */ diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 870e84fb6e39..a24278380fec 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -245,11 +245,12 @@ int __init of_setup_earlycon(const struct earlycon_id *match, } port->mapbase = addr; port->uartclk = BASE_BAUD * 16; - port->membase = earlycon_map(port->mapbase, SZ_4K); val = of_get_flat_dt_prop(node, "reg-offset", NULL); if (val) port->mapbase += be32_to_cpu(*val); + port->membase = earlycon_map(port->mapbase, SZ_4K); + val = of_get_flat_dt_prop(node, "reg-shift", NULL); if (val) port->regshift = be32_to_cpu(*val); diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c deleted file mode 100644 index 24bf6bfb29b4..000000000000 --- a/drivers/tty/serial/etraxfs-uart.c +++ /dev/null @@ -1,960 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/module.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/tty_flip.h> -#include <linux/of.h> -#include <linux/gpio.h> -#include <linux/of_irq.h> -#include <linux/of_address.h> -#include <hwregs/ser_defs.h> - -#include "serial_mctrl_gpio.h" - -#define DRV_NAME "etraxfs-uart" -#define UART_NR CONFIG_ETRAX_SERIAL_PORTS - -#define MODIFY_REG(instance, reg, var) \ - do { \ - if (REG_RD_INT(ser, instance, reg) != \ - REG_TYPE_CONV(int, reg_ser_##reg, var)) \ - REG_WR(ser, instance, reg, var); \ - } while (0) - -struct uart_cris_port { - struct uart_port port; - - int initialized; - int irq; - - void __iomem *regi_ser; - - struct mctrl_gpios *gpios; - - int write_ongoing; -}; - -static struct uart_driver etraxfs_uart_driver; -static struct uart_port *console_port; -static int console_baud = 115200; -static struct uart_cris_port *etraxfs_uart_ports[UART_NR]; - -static void cris_serial_port_init(struct uart_port *port, int line); -static void etraxfs_uart_stop_rx(struct uart_port *port); -static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port); - -#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE -static void -cris_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_cris_port *up; - int i; - reg_ser_r_stat_din stat; - reg_ser_rw_tr_dma_en tr_dma_en, old; - - up = etraxfs_uart_ports[co->index]; - - if (!up) - return; - - /* Switch to manual mode. */ - tr_dma_en = old = REG_RD(ser, up->regi_ser, rw_tr_dma_en); - if (tr_dma_en.en == regk_ser_yes) { - tr_dma_en.en = regk_ser_no; - REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); - } - - /* Send data. */ - for (i = 0; i < count; i++) { - /* LF -> CRLF */ - if (s[i] == '\n') { - do { - stat = REG_RD(ser, up->regi_ser, r_stat_din); - } while (!stat.tr_rdy); - REG_WR_INT(ser, up->regi_ser, rw_dout, '\r'); - } - /* Wait until transmitter is ready and send. */ - do { - stat = REG_RD(ser, up->regi_ser, r_stat_din); - } while (!stat.tr_rdy); - REG_WR_INT(ser, up->regi_ser, rw_dout, s[i]); - } - - /* Restore mode. */ - if (tr_dma_en.en != old.en) - REG_WR(ser, up->regi_ser, rw_tr_dma_en, old); -} - -static int __init -cris_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= UART_NR) - co->index = 0; - port = &etraxfs_uart_ports[co->index]->port; - console_port = port; - - co->flags |= CON_CONSDEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - console_baud = baud; - cris_serial_port_init(port, co->index); - uart_set_options(port, co, baud, parity, bits, flow); - - return 0; -} - -static struct console cris_console = { - .name = "ttyS", - .write = cris_console_write, - .device = uart_console_device, - .setup = cris_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &etraxfs_uart_driver, -}; -#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */ - -static struct uart_driver etraxfs_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = UART_NR, -#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE - .cons = &cris_console, -#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */ -}; - -static inline int crisv32_serial_get_rts(struct uart_cris_port *up) -{ - void __iomem *regi_ser = up->regi_ser; - /* - * Return what the user has controlled rts to or - * what the pin is? (if auto_rts is used it differs during tx) - */ - reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); - - return !(rstat.rts_n == regk_ser_active); -} - -/* - * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive - * 0=0V , 1=3.3V - */ -static inline void crisv32_serial_set_rts(struct uart_cris_port *up, - int set, int force) -{ - void __iomem *regi_ser = up->regi_ser; - - unsigned long flags; - reg_ser_rw_rec_ctrl rec_ctrl; - - local_irq_save(flags); - rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); - - if (set) - rec_ctrl.rts_n = regk_ser_active; - else - rec_ctrl.rts_n = regk_ser_inactive; - REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); - local_irq_restore(flags); -} - -static inline int crisv32_serial_get_cts(struct uart_cris_port *up) -{ - void __iomem *regi_ser = up->regi_ser; - reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); - - return (rstat.cts_n == regk_ser_active); -} - -/* - * Send a single character for XON/XOFF purposes. We do it in this separate - * function instead of the alternative support port.x_char, in the ...start_tx - * function, so we don't mix up this case with possibly enabling transmission - * of queued-up data (in case that's disabled after *receiving* an XOFF or - * negative CTS). This function is used for both DMA and non-DMA case; see HW - * docs specifically blessing sending characters manually when DMA for - * transmission is enabled and running. We may be asked to transmit despite - * the transmitter being disabled by a ..._stop_tx call so we need to enable - * it temporarily but restore the state afterwards. - */ -static void etraxfs_uart_send_xchar(struct uart_port *port, char ch) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - reg_ser_rw_dout dout = { .data = ch }; - reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; - reg_ser_r_stat_din rstat; - reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl; - void __iomem *regi_ser = up->regi_ser; - unsigned long flags; - - /* - * Wait for tr_rdy in case a character is already being output. Make - * sure we have integrity between the register reads and the writes - * below, but don't busy-wait with interrupts off and the port lock - * taken. - */ - spin_lock_irqsave(&port->lock, flags); - do { - spin_unlock_irqrestore(&port->lock, flags); - spin_lock_irqsave(&port->lock, flags); - prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); - rstat = REG_RD(ser, regi_ser, r_stat_din); - } while (!rstat.tr_rdy); - - /* - * Ack an interrupt if one was just issued for the previous character - * that was output. This is required for non-DMA as the interrupt is - * used as the only indicator that the transmitter is ready and it - * isn't while this x_char is being transmitted. - */ - REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); - - /* Enable the transmitter in case it was disabled. */ - tr_ctrl.stop = 0; - REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); - - /* - * Finally, send the blessed character; nothing should stop it now, - * except for an xoff-detected state, which we'll handle below. - */ - REG_WR(ser, regi_ser, rw_dout, dout); - up->port.icount.tx++; - - /* There might be an xoff state to clear. */ - rstat = REG_RD(ser, up->regi_ser, r_stat_din); - - /* - * Clear any xoff state that *may* have been there to - * inhibit transmission of the character. - */ - if (rstat.xoff_detect) { - reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 }; - reg_ser_rw_tr_dma_en tr_dma_en; - - REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); - tr_dma_en = REG_RD(ser, regi_ser, rw_tr_dma_en); - - /* - * If we had an xoff state but cleared it, instead sneak in a - * disabled state for the transmitter, after the character we - * sent. Thus we keep the port disabled, just as if the xoff - * state was still in effect (or actually, as if stop_tx had - * been called, as we stop DMA too). - */ - prev_tr_ctrl.stop = 1; - - tr_dma_en.en = 0; - REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); - } - - /* Restore "previous" enabled/disabled state of the transmitter. */ - REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * Do not spin_lock_irqsave or disable interrupts by other means here; it's - * already done by the caller. - */ -static void etraxfs_uart_start_tx(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - - /* we have already done below if a write is ongoing */ - if (up->write_ongoing) - return; - - /* Signal that write is ongoing */ - up->write_ongoing = 1; - - etraxfs_uart_start_tx_bottom(port); -} - -static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - void __iomem *regi_ser = up->regi_ser; - reg_ser_rw_tr_ctrl tr_ctrl; - reg_ser_rw_intr_mask intr_mask; - - tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); - tr_ctrl.stop = regk_ser_no; - REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); - intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); - intr_mask.tr_rdy = regk_ser_yes; - REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); -} - -/* - * This function handles both the DMA and non-DMA case by ordering the - * transmitter to stop of after the current character. We don't need to wait - * for any such character to be completely transmitted; we do that where it - * matters, like in etraxfs_uart_set_termios. Don't busy-wait here; see - * Documentation/serial/driver: this function is called within - * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP). - * There's no documented need to set the txd pin to any particular value; - * break setting is controlled solely by etraxfs_uart_break_ctl. - */ -static void etraxfs_uart_stop_tx(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - void __iomem *regi_ser = up->regi_ser; - reg_ser_rw_tr_ctrl tr_ctrl; - reg_ser_rw_intr_mask intr_mask; - reg_ser_rw_tr_dma_en tr_dma_en = {0}; - reg_ser_rw_xoff_clr xoff_clr = {0}; - - /* - * For the non-DMA case, we'd get a tr_rdy interrupt that we're not - * interested in as we're not transmitting any characters. For the - * DMA case, that interrupt is already turned off, but no reason to - * waste code on conditionals here. - */ - intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); - intr_mask.tr_rdy = regk_ser_no; - REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); - - tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); - tr_ctrl.stop = 1; - REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); - - /* - * Always clear possible hardware xoff-detected state here, no need to - * unnecessary consider mctrl settings and when they change. We clear - * it here rather than in start_tx: both functions are called as the - * effect of XOFF processing, but start_tx is also called when upper - * levels tell the driver that there are more characters to send, so - * avoid adding code there. - */ - xoff_clr.clr = 1; - REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); - - /* - * Disable transmitter DMA, so that if we're in XON/XOFF, we can send - * those single characters without also giving go-ahead for queued up - * DMA data. - */ - tr_dma_en.en = 0; - REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); - - /* - * Make sure that write_ongoing is reset when stopping tx. - */ - up->write_ongoing = 0; -} - -static void etraxfs_uart_stop_rx(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - void __iomem *regi_ser = up->regi_ser; - reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); - - rec_ctrl.en = regk_ser_no; - REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); -} - -static unsigned int etraxfs_uart_tx_empty(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - unsigned long flags; - unsigned int ret; - reg_ser_r_stat_din rstat = {0}; - - spin_lock_irqsave(&up->port.lock, flags); - - rstat = REG_RD(ser, up->regi_ser, r_stat_din); - ret = rstat.tr_empty ? TIOCSER_TEMT : 0; - - spin_unlock_irqrestore(&up->port.lock, flags); - return ret; -} -static unsigned int etraxfs_uart_get_mctrl(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - unsigned int ret; - - ret = 0; - if (crisv32_serial_get_rts(up)) - ret |= TIOCM_RTS; - if (crisv32_serial_get_cts(up)) - ret |= TIOCM_CTS; - return mctrl_gpio_get(up->gpios, &ret); -} - -static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - - crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0, 0); - mctrl_gpio_set(up->gpios, mctrl); -} - -static void etraxfs_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - unsigned long flags; - reg_ser_rw_tr_ctrl tr_ctrl; - reg_ser_rw_tr_dma_en tr_dma_en; - reg_ser_rw_intr_mask intr_mask; - - spin_lock_irqsave(&up->port.lock, flags); - tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl); - tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en); - intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask); - - if (break_state != 0) { /* Send break */ - /* - * We need to disable DMA (if used) or tr_rdy interrupts if no - * DMA. No need to make this conditional on use of DMA; - * disabling will be a no-op for the other mode. - */ - intr_mask.tr_rdy = regk_ser_no; - tr_dma_en.en = 0; - - /* - * Stop transmission and set the txd pin to 0 after the - * current character. The txd setting will take effect after - * any current transmission has completed. - */ - tr_ctrl.stop = 1; - tr_ctrl.txd = 0; - } else { - /* Re-enable the serial interrupt. */ - intr_mask.tr_rdy = regk_ser_yes; - - tr_ctrl.stop = 0; - tr_ctrl.txd = 1; - } - REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl); - REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); - REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -transmit_chars_no_dma(struct uart_cris_port *up) -{ - int max_count; - struct circ_buf *xmit = &up->port.state->xmit; - - void __iomem *regi_ser = up->regi_ser; - reg_ser_r_stat_din rstat; - reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - /* No more to send, so disable the interrupt. */ - reg_ser_rw_intr_mask intr_mask; - - intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); - intr_mask.tr_rdy = 0; - intr_mask.tr_empty = 0; - REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); - up->write_ongoing = 0; - return; - } - - /* If the serport is fast, we send up to max_count bytes before - exiting the loop. */ - max_count = 64; - do { - reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] }; - - REG_WR(ser, regi_ser, rw_dout, dout); - REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - up->port.icount.tx++; - if (xmit->head == xmit->tail) - break; - rstat = REG_RD(ser, regi_ser, r_stat_din); - } while ((--max_count > 0) && rstat.tr_rdy); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); -} - -static void receive_chars_no_dma(struct uart_cris_port *up) -{ - reg_ser_rs_stat_din stat_din; - reg_ser_r_stat_din rstat; - struct tty_port *port; - struct uart_icount *icount; - int max_count = 16; - char flag; - reg_ser_rw_ack_intr ack_intr = { 0 }; - - rstat = REG_RD(ser, up->regi_ser, r_stat_din); - icount = &up->port.icount; - port = &up->port.state->port; - - do { - stat_din = REG_RD(ser, up->regi_ser, rs_stat_din); - - flag = TTY_NORMAL; - ack_intr.dav = 1; - REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr); - icount->rx++; - - if (stat_din.framing_err | stat_din.par_err | stat_din.orun) { - if (stat_din.data == 0x00 && - stat_din.framing_err) { - /* Most likely a break. */ - flag = TTY_BREAK; - icount->brk++; - } else if (stat_din.par_err) { - flag = TTY_PARITY; - icount->parity++; - } else if (stat_din.orun) { - flag = TTY_OVERRUN; - icount->overrun++; - } else if (stat_din.framing_err) { - flag = TTY_FRAME; - icount->frame++; - } - } - - /* - * If this becomes important, we probably *could* handle this - * gracefully by keeping track of the unhandled character. - */ - if (!tty_insert_flip_char(port, stat_din.data, flag)) - panic("%s: No tty buffer space", __func__); - rstat = REG_RD(ser, up->regi_ser, r_stat_din); - } while (rstat.dav && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(port); - spin_lock(&up->port.lock); -} - -static irqreturn_t -ser_interrupt(int irq, void *dev_id) -{ - struct uart_cris_port *up = (struct uart_cris_port *)dev_id; - void __iomem *regi_ser; - int handled = 0; - - spin_lock(&up->port.lock); - - regi_ser = up->regi_ser; - - if (regi_ser) { - reg_ser_r_masked_intr masked_intr; - - masked_intr = REG_RD(ser, regi_ser, r_masked_intr); - /* - * Check what interrupts are active before taking - * actions. If DMA is used the interrupt shouldn't - * be enabled. - */ - if (masked_intr.dav) { - receive_chars_no_dma(up); - handled = 1; - } - - if (masked_intr.tr_rdy) { - transmit_chars_no_dma(up); - handled = 1; - } - } - spin_unlock(&up->port.lock); - return IRQ_RETVAL(handled); -} - -#ifdef CONFIG_CONSOLE_POLL -static int etraxfs_uart_get_poll_char(struct uart_port *port) -{ - reg_ser_rs_stat_din stat; - reg_ser_rw_ack_intr ack_intr = { 0 }; - struct uart_cris_port *up = (struct uart_cris_port *)port; - - do { - stat = REG_RD(ser, up->regi_ser, rs_stat_din); - } while (!stat.dav); - - /* Ack the data_avail interrupt. */ - ack_intr.dav = 1; - REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr); - - return stat.data; -} - -static void etraxfs_uart_put_poll_char(struct uart_port *port, - unsigned char c) -{ - reg_ser_r_stat_din stat; - struct uart_cris_port *up = (struct uart_cris_port *)port; - - do { - stat = REG_RD(ser, up->regi_ser, r_stat_din); - } while (!stat.tr_rdy); - REG_WR_INT(ser, up->regi_ser, rw_dout, c); -} -#endif /* CONFIG_CONSOLE_POLL */ - -static int etraxfs_uart_startup(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - unsigned long flags; - reg_ser_rw_intr_mask ser_intr_mask = {0}; - - ser_intr_mask.dav = regk_ser_yes; - - if (request_irq(etraxfs_uart_ports[port->line]->irq, ser_interrupt, - 0, DRV_NAME, etraxfs_uart_ports[port->line])) - panic("irq ser%d", port->line); - - spin_lock_irqsave(&up->port.lock, flags); - - REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask); - - etraxfs_uart_set_mctrl(&up->port, up->port.mctrl); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -static void etraxfs_uart_shutdown(struct uart_port *port) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - etraxfs_uart_stop_tx(port); - etraxfs_uart_stop_rx(port); - - free_irq(etraxfs_uart_ports[port->line]->irq, - etraxfs_uart_ports[port->line]); - - etraxfs_uart_set_mctrl(&up->port, up->port.mctrl); - - spin_unlock_irqrestore(&up->port.lock, flags); - -} - -static void -etraxfs_uart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - unsigned long flags; - reg_ser_rw_xoff xoff; - reg_ser_rw_xoff_clr xoff_clr = {0}; - reg_ser_rw_tr_ctrl tx_ctrl = {0}; - reg_ser_rw_tr_dma_en tx_dma_en = {0}; - reg_ser_rw_rec_ctrl rx_ctrl = {0}; - reg_ser_rw_tr_baud_div tx_baud_div = {0}; - reg_ser_rw_rec_baud_div rx_baud_div = {0}; - int baud; - - if (old && - termios->c_cflag == old->c_cflag && - termios->c_iflag == old->c_iflag) - return; - - /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */ - tx_ctrl.base_freq = regk_ser_f29_493; - tx_ctrl.en = 0; - tx_ctrl.stop = 0; - tx_ctrl.auto_rts = regk_ser_no; - tx_ctrl.txd = 1; - tx_ctrl.auto_cts = 0; - /* Rx: 8 bit, no/even parity. */ - rx_ctrl.dma_err = regk_ser_stop; - rx_ctrl.sampling = regk_ser_majority; - rx_ctrl.timeout = 1; - - rx_ctrl.rts_n = regk_ser_inactive; - - /* Common for tx and rx: 8N1. */ - tx_ctrl.data_bits = regk_ser_bits8; - rx_ctrl.data_bits = regk_ser_bits8; - tx_ctrl.par = regk_ser_even; - rx_ctrl.par = regk_ser_even; - tx_ctrl.par_en = regk_ser_no; - rx_ctrl.par_en = regk_ser_no; - - tx_ctrl.stop_bits = regk_ser_bits1; - - /* - * Change baud-rate and write it to the hardware. - * - * baud_clock = base_freq / (divisor*8) - * divisor = base_freq / (baud_clock * 8) - * base_freq is either: - * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz - * 20.493MHz is used for standard baudrates - */ - - /* - * For the console port we keep the original baudrate here. Not very - * beautiful. - */ - if ((port != console_port) || old) - baud = uart_get_baud_rate(port, termios, old, 0, - port->uartclk / 8); - else - baud = console_baud; - - tx_baud_div.div = 29493000 / (8 * baud); - /* Rx uses same as tx. */ - rx_baud_div.div = tx_baud_div.div; - rx_ctrl.base_freq = tx_ctrl.base_freq; - - if ((termios->c_cflag & CSIZE) == CS7) { - /* Set 7 bit mode. */ - tx_ctrl.data_bits = regk_ser_bits7; - rx_ctrl.data_bits = regk_ser_bits7; - } - - if (termios->c_cflag & CSTOPB) { - /* Set 2 stop bit mode. */ - tx_ctrl.stop_bits = regk_ser_bits2; - } - - if (termios->c_cflag & PARENB) { - /* Enable parity. */ - tx_ctrl.par_en = regk_ser_yes; - rx_ctrl.par_en = regk_ser_yes; - } - - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) { - /* Set mark parity if PARODD and CMSPAR. */ - tx_ctrl.par = regk_ser_mark; - rx_ctrl.par = regk_ser_mark; - } else { - tx_ctrl.par = regk_ser_space; - rx_ctrl.par = regk_ser_space; - } - } else { - if (termios->c_cflag & PARODD) { - /* Set odd parity. */ - tx_ctrl.par = regk_ser_odd; - rx_ctrl.par = regk_ser_odd; - } - } - - if (termios->c_cflag & CRTSCTS) { - /* Enable automatic CTS handling. */ - tx_ctrl.auto_cts = regk_ser_yes; - } - - /* Make sure the tx and rx are enabled. */ - tx_ctrl.en = regk_ser_yes; - rx_ctrl.en = regk_ser_yes; - - spin_lock_irqsave(&port->lock, flags); - - tx_dma_en.en = 0; - REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); - - /* Actually write the control regs (if modified) to the hardware. */ - uart_update_timeout(port, termios->c_cflag, port->uartclk/8); - MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div); - MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl); - - MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div); - MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl); - - tx_dma_en.en = 0; - REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); - - xoff = REG_RD(ser, up->regi_ser, rw_xoff); - - if (up->port.state && up->port.state->port.tty && - (up->port.state->port.tty->termios.c_iflag & IXON)) { - xoff.chr = STOP_CHAR(up->port.state->port.tty); - xoff.automatic = regk_ser_yes; - } else - xoff.automatic = regk_ser_no; - - MODIFY_REG(up->regi_ser, rw_xoff, xoff); - - /* - * Make sure we don't start in an automatically shut-off state due to - * a previous early exit. - */ - xoff_clr.clr = 1; - REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr); - - etraxfs_uart_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const char * -etraxfs_uart_type(struct uart_port *port) -{ - return "CRISv32"; -} - -static void etraxfs_uart_release_port(struct uart_port *port) -{ -} - -static int etraxfs_uart_request_port(struct uart_port *port) -{ - return 0; -} - -static void etraxfs_uart_config_port(struct uart_port *port, int flags) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - - up->port.type = PORT_CRIS; -} - -static const struct uart_ops etraxfs_uart_pops = { - .tx_empty = etraxfs_uart_tx_empty, - .set_mctrl = etraxfs_uart_set_mctrl, - .get_mctrl = etraxfs_uart_get_mctrl, - .stop_tx = etraxfs_uart_stop_tx, - .start_tx = etraxfs_uart_start_tx, - .send_xchar = etraxfs_uart_send_xchar, - .stop_rx = etraxfs_uart_stop_rx, - .break_ctl = etraxfs_uart_break_ctl, - .startup = etraxfs_uart_startup, - .shutdown = etraxfs_uart_shutdown, - .set_termios = etraxfs_uart_set_termios, - .type = etraxfs_uart_type, - .release_port = etraxfs_uart_release_port, - .request_port = etraxfs_uart_request_port, - .config_port = etraxfs_uart_config_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = etraxfs_uart_get_poll_char, - .poll_put_char = etraxfs_uart_put_poll_char, -#endif -}; - -static void cris_serial_port_init(struct uart_port *port, int line) -{ - struct uart_cris_port *up = (struct uart_cris_port *)port; - - if (up->initialized) - return; - up->initialized = 1; - port->line = line; - spin_lock_init(&port->lock); - port->ops = &etraxfs_uart_pops; - port->irq = up->irq; - port->iobase = (unsigned long) up->regi_ser; - port->uartclk = 29493000; - - /* - * We can't fit any more than 255 here (unsigned char), though - * actually UART_XMIT_SIZE characters could be pending output. - * At time of this writing, the definition of "fifosize" is here the - * amount of characters that can be pending output after a start_tx call - * until tx_empty returns 1: see serial_core.c:uart_wait_until_sent. - * This matters for timeout calculations unfortunately, but keeping - * larger amounts at the DMA wouldn't win much so let's just play nice. - */ - port->fifosize = 255; - port->flags = UPF_BOOT_AUTOCONF; -} - -static int etraxfs_uart_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct uart_cris_port *up; - int dev_id; - - if (!np) - return -ENODEV; - - dev_id = of_alias_get_id(np, "serial"); - if (dev_id < 0) - dev_id = 0; - - if (dev_id >= UART_NR) - return -EINVAL; - - if (etraxfs_uart_ports[dev_id]) - return -EBUSY; - - up = devm_kzalloc(&pdev->dev, sizeof(struct uart_cris_port), - GFP_KERNEL); - if (!up) - return -ENOMEM; - - up->irq = irq_of_parse_and_map(np, 0); - up->regi_ser = of_iomap(np, 0); - up->port.dev = &pdev->dev; - - up->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0); - if (IS_ERR(up->gpios)) - return PTR_ERR(up->gpios); - - cris_serial_port_init(&up->port, dev_id); - - etraxfs_uart_ports[dev_id] = up; - platform_set_drvdata(pdev, &up->port); - uart_add_one_port(&etraxfs_uart_driver, &up->port); - - return 0; -} - -static int etraxfs_uart_remove(struct platform_device *pdev) -{ - struct uart_port *port; - - port = platform_get_drvdata(pdev); - uart_remove_one_port(&etraxfs_uart_driver, port); - etraxfs_uart_ports[port->line] = NULL; - - return 0; -} - -static const struct of_device_id etraxfs_uart_dt_ids[] = { - { .compatible = "axis,etraxfs-uart" }, - { /* sentinel */ } -}; - -MODULE_DEVICE_TABLE(of, etraxfs_uart_dt_ids); - -static struct platform_driver etraxfs_uart_platform_driver = { - .driver = { - .name = DRV_NAME, - .of_match_table = of_match_ptr(etraxfs_uart_dt_ids), - }, - .probe = etraxfs_uart_probe, - .remove = etraxfs_uart_remove, -}; - -static int __init etraxfs_uart_init(void) -{ - int ret; - - ret = uart_register_driver(&etraxfs_uart_driver); - if (ret) - return ret; - - ret = platform_driver_register(&etraxfs_uart_platform_driver); - if (ret) - uart_unregister_driver(&etraxfs_uart_driver); - - return ret; -} - -static void __exit etraxfs_uart_exit(void) -{ - platform_driver_unregister(&etraxfs_uart_platform_driver); - uart_unregister_driver(&etraxfs_uart_driver); -} - -module_init(etraxfs_uart_init); -module_exit(etraxfs_uart_exit); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 1d7ca382bc12..a33c685af990 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2093,7 +2093,7 @@ static int serial_imx_probe(struct platform_device *pdev) uart_get_rs485_mode(&pdev->dev, &sport->port.rs485); if (sport->port.rs485.flags & SER_RS485_ENABLED && - (!sport->have_rtscts || !sport->have_rtsgpio)) + (!sport->have_rtscts && !sport->have_rtsgpio)) dev_err(&pdev->dev, "no RTS control, disabling rs485\n"); imx_rs485_config(&sport->port, &sport->port.rs485); diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c deleted file mode 100644 index 7b83a8aab495..000000000000 --- a/drivers/tty/serial/m32r_sio.c +++ /dev/null @@ -1,1053 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * m32r_sio.c - * - * Driver for M32R serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/8250.c. - * - * Copyright (C) 2001 Russell King. - * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> - */ - -/* - * A note about mapbase / membase - * - * mapbase is the physical address of the IO port. Currently, we don't - * support this very well, and it may well be dropped from this driver - * in future. As such, mapbase should be NULL. - * - * membase is an 'ioremapped' cookie. This is compatible with the old - * serial.c driver, and is currently the preferred form. - */ - -#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/serial.h> -#include <linux/delay.h> - -#include <asm/m32r.h> -#include <asm/io.h> -#include <asm/irq.h> - -#define BAUD_RATE 115200 - -#include <linux/serial_core.h> -#include "m32r_sio_reg.h" - -#define PASS_LIMIT 256 - -static const struct { - unsigned int port; - unsigned int irq; -} old_serial_port[] = { -#if defined(CONFIG_PLAT_USRV) - /* PORT IRQ FLAGS */ - { 0x3F8, PLD_IRQ_UART0 }, /* ttyS0 */ - { 0x2F8, PLD_IRQ_UART1 }, /* ttyS1 */ -#elif defined(CONFIG_SERIAL_M32R_PLDSIO) - { ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV }, /* ttyS0 */ -#else - { M32R_SIO_OFFSET, M32R_IRQ_SIO0_R }, /* ttyS0 */ -#endif -}; - -#define UART_NR ARRAY_SIZE(old_serial_port) - -struct uart_sio_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned char ier; -}; - -struct irq_info { - spinlock_t lock; - struct list_head *head; -}; - -static struct irq_info irq_lists[NR_IRQS]; - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define __sio_in(x) inw((unsigned long)(x)) -#define __sio_out(v,x) outw((v),(unsigned long)(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned short sbaud; - sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; - __sio_out(sbaud, PLD_ESIO0BAUR); -} - -static void sio_reset(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_init(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); -} - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define __sio_in(x) inl(x) -#define __sio_out(v,x) outl((v),(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned long i, j; - - i = boot_cpu_data.bus_clock / (baud * 16); - j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; - i -= 1; - j = (j + 1) >> 1; - - __sio_out(i, M32R_SIO0_BAUR_PORTL); - __sio_out(j, M32R_SIO0_RBAUR_PORTL); -} - -static void sio_reset(void) -{ - __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ - __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ - __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ -} - -static void sio_init(void) -{ - unsigned int tmp; - - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_STS_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); -} - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -static unsigned int sio_in(struct uart_sio_port *up, int offset) -{ - return __sio_in(up->port.iobase + offset); -} - -static void sio_out(struct uart_sio_port *up, int offset, int value) -{ - __sio_out(value, up->port.iobase + offset); -} - -static unsigned int serial_in(struct uart_sio_port *up, int offset) -{ - if (!offset) - return 0; - - return __sio_in(offset); -} - -static void serial_out(struct uart_sio_port *up, int offset, int value) -{ - if (!offset) - return; - - __sio_out(value, offset); -} - -static void m32r_sio_stop_tx(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void m32r_sio_start_tx(struct uart_port *port) -{ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - struct circ_buf *xmit = &up->port.state->xmit; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - if (!uart_circ_empty(xmit)) { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - } - } - while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); -#else - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -#endif -} - -static void m32r_sio_stop_rx(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void m32r_sio_enable_ms(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void receive_chars(struct uart_sio_port *up, int *status) -{ - struct tty_port *port = &up->port.state->port; - unsigned char ch; - unsigned char flag; - int max_count = 256; - - do { - ch = sio_in(up, SIORXB); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - *status &= up->port.read_status_mask; - - if (*status & UART_LSR_BI) { - pr_debug("handling break....\n"); - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(port, ch, flag); - - if (*status & UART_LSR_OE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(port, 0, TTY_OVERRUN); - } - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - - spin_unlock(&up->port.lock); - tty_flip_buffer_push(port); - spin_lock(&up->port.lock); -} - -static void transmit_chars(struct uart_sio_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { -#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ - serial_out(up, UART_TX, up->port.x_char); -#endif - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - m32r_sio_stop_tx(&up->port); - return; - } - - count = up->port.fifosize; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); - - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - pr_debug("THRE...\n"); - - if (uart_circ_empty(xmit)) - m32r_sio_stop_tx(&up->port); -} - -/* - * This handles the interrupt from one port. - */ -static inline void m32r_sio_handle_port(struct uart_sio_port *up, - unsigned int status) -{ - pr_debug("status = %x...\n", status); - - if (status & 0x04) - receive_chars(up, &status); - if (status & 0x01) - transmit_chars(up); -} - -/* - * This is the serial driver's interrupt routine. - * - * Arjan thinks the old way was overly complex, so it got simplified. - * Alan disagrees, saying that need the complexity to handle the weird - * nature of ISA shared interrupts. (This is a special exception.) - * - * In order to handle ISA shared interrupts properly, we need to check - * that all ports have been serviced, and therefore the ISA interrupt - * line has been de-asserted. - * - * This means we need to loop through all ports. checking that they - * don't have an interrupt pending. - */ -static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) -{ - struct irq_info *i = dev_id; - struct list_head *l, *end = NULL; - int pass_counter = 0; - - pr_debug("m32r_sio_interrupt(%d)...\n", irq); - -#ifdef CONFIG_SERIAL_M32R_PLDSIO -// if (irq == PLD_IRQ_SIO0_SND) -// irq = PLD_IRQ_SIO0_RCV; -#else - if (irq == M32R_IRQ_SIO0_S) - irq = M32R_IRQ_SIO0_R; -#endif - - spin_lock(&i->lock); - - l = i->head; - do { - struct uart_sio_port *up; - unsigned int sts; - - up = list_entry(l, struct uart_sio_port, list); - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - - end = NULL; - } else if (end == NULL) - end = l; - - l = l->next; - - if (l == i->head && pass_counter++ > PASS_LIMIT) { - if (sts & 0xe0) - sio_error(&sts); - break; - } - } while (l != end); - - spin_unlock(&i->lock); - - pr_debug("end.\n"); - - return IRQ_HANDLED; -} - -/* - * To support ISA shared interrupts, we need to have one interrupt - * handler that ensures that the IRQ line has been deasserted - * before returning. Failing to do this will result in the IRQ - * line being stuck active, and, since ISA irqs are edge triggered, - * no more IRQs will be seen. - */ -static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) -{ - spin_lock_irq(&i->lock); - - if (!list_empty(i->head)) { - if (i->head == &up->list) - i->head = i->head->next; - list_del(&up->list); - } else { - BUG_ON(i->head != &up->list); - i->head = NULL; - } - - spin_unlock_irq(&i->lock); -} - -static int serial_link_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - int ret, irq_flags = 0; - - spin_lock_irq(&i->lock); - - if (i->head) { - list_add(&up->list, i->head); - spin_unlock_irq(&i->lock); - - ret = 0; - } else { - INIT_LIST_HEAD(&up->list); - i->head = &up->list; - spin_unlock_irq(&i->lock); - - ret = request_irq(up->port.irq, m32r_sio_interrupt, - irq_flags, "SIO0-RX", i); - ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, - irq_flags, "SIO0-TX", i); - if (ret < 0) - serial_do_unlink(i, up); - } - - return ret; -} - -static void serial_unlink_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - - BUG_ON(i->head == NULL); - - if (list_empty(i->head)) { - free_irq(up->port.irq, i); - free_irq(up->port.irq + 1, i); - } - - serial_do_unlink(i, up); -} - -/* - * This function is used to handle ports that do not have an interrupt. - */ -static void m32r_sio_timeout(struct timer_list *t) -{ - struct uart_sio_port *up = from_timer(up, t, timer); - unsigned int timeout; - unsigned int sts; - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - } - - timeout = up->port.timeout; - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - mod_timer(&up->timer, jiffies + timeout); -} - -static unsigned int m32r_sio_tx_empty(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int m32r_sio_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - -} - -static void m32r_sio_break_ctl(struct uart_port *port, int break_state) -{ - -} - -static int m32r_sio_startup(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - int retval; - - sio_init(); - - /* - * If the "interrupt" for this port doesn't correspond with any - * hardware interrupt, we use a timer-based system. The original - * driver used to do this with IRQ0. - */ - if (!up->port.irq) { - unsigned int timeout = up->port.timeout; - - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - - mod_timer(&up->timer, jiffies + timeout); - } else { - retval = serial_link_irq_chain(up); - if (retval) - return retval; - } - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - * - M32R_SIO: 0x0c - * - M32R_PLDSIO: 0x04 - */ - up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - sio_out(up, SIOTRCR, up->ier); - - /* - * And clear the interrupt registers again for luck. - */ - sio_reset(); - - return 0; -} - -static void m32r_sio_shutdown(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - - /* - * Disable interrupts from this port - */ - up->ier = 0; - sio_out(up, SIOTRCR, 0); - - /* - * Disable break condition and FIFOs - */ - - sio_init(); - - if (!up->port.irq) - del_timer_sync(&up->timer); - else - serial_unlink_irq_chain(up); -} - -static unsigned int m32r_sio_get_divisor(struct uart_port *port, - unsigned int baud) -{ - return uart_get_divisor(port, baud); -} - -static void m32r_sio_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - unsigned char cval = 0; - unsigned long flags; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Ask the core to calculate the divisor for us. - */ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); -#else - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -#endif - quot = m32r_sio_get_divisor(port, baud); - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - sio_set_baud_rate(baud); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * Resource handling. This is complicated by the fact that resources - * depend on the port type. Maybe we should be claiming the standard - * 8250 ports, and then trying to get other resources as necessary? - */ -static int -m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) -{ - unsigned int size = 8 << up->port.regshift; -#ifndef CONFIG_SERIAL_M32R_PLDSIO - unsigned long start; -#endif - int ret = 0; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { -#ifdef CONFIG_SERIAL_M32R_PLDSIO - *res = request_mem_region(up->port.mapbase, size, "serial"); -#else - start = up->port.mapbase; - *res = request_mem_region(start, size, "serial"); -#endif - if (!*res) - ret = -EBUSY; - } - break; - - case UPIO_PORT: - *res = request_region(up->port.iobase, size, "serial"); - if (!*res) - ret = -EBUSY; - break; - } - return ret; -} - -static void m32r_sio_release_port(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - unsigned long start, offset = 0, size = 0; - - size <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { - /* - * Unmap the area. - */ - iounmap(up->port.membase); - up->port.membase = NULL; - - start = up->port.mapbase; - - if (size) - release_mem_region(start + offset, size); - release_mem_region(start, 8 << up->port.regshift); - } - break; - - case UPIO_PORT: - start = up->port.iobase; - - if (size) - release_region(start + offset, size); - release_region(start + offset, 8 << up->port.regshift); - break; - - default: - break; - } -} - -static int m32r_sio_request_port(struct uart_port *port) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - struct resource *res = NULL; - int ret = 0; - - ret = m32r_sio_request_std_resource(up, &res); - - /* - * If we have a mapbase, then request that as well. - */ - if (ret == 0 && up->port.flags & UPF_IOREMAP) { - int size = resource_size(res); - - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) - ret = -ENOMEM; - } - - if (ret < 0) { - if (res) - release_resource(res); - } - - return ret; -} - -static void m32r_sio_config_port(struct uart_port *port, int unused) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.fifosize = 1; - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int -m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600) - return -EINVAL; - return 0; -} - -static const struct uart_ops m32r_sio_pops = { - .tx_empty = m32r_sio_tx_empty, - .set_mctrl = m32r_sio_set_mctrl, - .get_mctrl = m32r_sio_get_mctrl, - .stop_tx = m32r_sio_stop_tx, - .start_tx = m32r_sio_start_tx, - .stop_rx = m32r_sio_stop_rx, - .enable_ms = m32r_sio_enable_ms, - .break_ctl = m32r_sio_break_ctl, - .startup = m32r_sio_startup, - .shutdown = m32r_sio_shutdown, - .set_termios = m32r_sio_set_termios, - .release_port = m32r_sio_release_port, - .request_port = m32r_sio_request_port, - .config_port = m32r_sio_config_port, - .verify_port = m32r_sio_verify_port, -}; - -static struct uart_sio_port m32r_sio_ports[UART_NR]; - -static void __init m32r_sio_init_ports(void) -{ - struct uart_sio_port *up; - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0, up = m32r_sio_ports; i < UART_NR; i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.uartclk = BAUD_RATE * 16; - up->port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - up->port.membase = 0; - up->port.iotype = 0; - up->port.regshift = 0; - up->port.ops = &m32r_sio_pops; - } -} - -static void __init m32r_sio_register_ports(struct uart_driver *drv) -{ - int i; - - m32r_sio_init_ports(); - - for (i = 0; i < UART_NR; i++) { - struct uart_sio_port *up = &m32r_sio_ports[i]; - - up->port.line = i; - up->port.ops = &m32r_sio_pops; - timer_setup(&up->timer, m32r_sio_timeout, 0); - - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE - -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_sio_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = sio_in(up, SIOSTS); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & UART_EMPTY) != UART_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout) - udelay(1); - } -} - -static void m32r_sio_console_putchar(struct uart_port *port, int ch) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - - wait_for_xmitr(up); - sio_out(up, SIOTXB, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void m32r_sio_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_sio_port *up = &m32r_sio_ports[co->index]; - unsigned int ier; - - /* - * First save the UER then disable the interrupts - */ - ier = sio_in(up, SIOTRCR); - sio_out(up, SIOTRCR, 0); - - uart_console_write(&up->port, s, count, m32r_sio_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, SIOTRCR, ier); -} - -static int __init m32r_sio_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - port = &m32r_sio_ports[co->index].port; - - /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver m32r_sio_reg; -static struct console m32r_sio_console = { - .name = "ttyS", - .write = m32r_sio_console_write, - .device = uart_console_device, - .setup = m32r_sio_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &m32r_sio_reg, -}; - -static int __init m32r_sio_console_init(void) -{ - sio_reset(); - sio_init(); - m32r_sio_init_ports(); - register_console(&m32r_sio_console); - return 0; -} -console_initcall(m32r_sio_console_init); - -#define M32R_SIO_CONSOLE &m32r_sio_console -#else -#define M32R_SIO_CONSOLE NULL -#endif - -static struct uart_driver m32r_sio_reg = { - .owner = THIS_MODULE, - .driver_name = "sio", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = UART_NR, - .cons = M32R_SIO_CONSOLE, -}; - -static int __init m32r_sio_init(void) -{ - int ret, i; - - printk(KERN_INFO "Serial: M32R SIO driver\n"); - - for (i = 0; i < nr_irqs; i++) - spin_lock_init(&irq_lists[i].lock); - - ret = uart_register_driver(&m32r_sio_reg); - if (ret >= 0) - m32r_sio_register_ports(&m32r_sio_reg); - - return ret; -} -device_initcall(m32r_sio_init); diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/m32r_sio_reg.h deleted file mode 100644 index 6eed48828f94..000000000000 --- a/drivers/tty/serial/m32r_sio_reg.h +++ /dev/null @@ -1,150 +0,0 @@ -// SPDX-License-Identifier: GPL-1.0+ -/* - * m32r_sio_reg.h - * - * Copyright (C) 1992, 1994 by Theodore Ts'o. - * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> - * - * These are the UART port assignments, expressed as offsets from the base - * register. These assignments should hold for any serial port based on - * a 8250, 16450, or 16550(A). - */ - -#ifndef _M32R_SIO_REG_H -#define _M32R_SIO_REG_H - - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define SIOCR 0x000 -#define SIOMOD0 0x002 -#define SIOMOD1 0x004 -#define SIOSTS 0x006 -#define SIOTRCR 0x008 -#define SIOBAUR 0x00a -// #define SIORBAUR 0x018 -#define SIOTXB 0x00c -#define SIORXB 0x00e - -#define UART_RX ((unsigned long) PLD_ESIO0RXB) - /* In: Receive buffer (DLAB=0) */ -#define UART_TX ((unsigned long) PLD_ESIO0TXB) - /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER ((unsigned long) PLD_ESIO0INTCR) - /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR ((unsigned long) PLD_ESIO0STS) - /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define SIOCR 0x000 -#define SIOMOD0 0x004 -#define SIOMOD1 0x008 -#define SIOSTS 0x00c -#define SIOTRCR 0x010 -#define SIOBAUR 0x014 -#define SIORBAUR 0x018 -#define SIOTXB 0x01c -#define SIORXB 0x020 - -#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ -#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * These are the definitions for the Line Control Register - * - * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting - * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. - */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x02 /* Transmitter empty */ -#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x00 /* Break interrupt indicator */ -#define UART_LSR_FE 0x80 /* Frame error indicator */ -#define UART_LSR_PE 0x40 /* Parity error indicator */ -#define UART_LSR_OE 0x20 /* Overrun error indicator */ -#define UART_LSR_DR 0x04 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ - -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ - -#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index c8dde56b532b..35b9201db3b4 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1144,6 +1144,8 @@ static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) uport->ops->config_port(uport, flags); ret = uart_startup(tty, state, 1); + if (ret == 0) + tty_port_set_initialized(port, true); if (ret > 0) ret = 0; } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7257c078e155..44adf9db38f8 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -885,6 +885,8 @@ static void sci_receive_chars(struct uart_port *port) /* Tell the rest of the system the news. New characters! */ tty_flip_buffer_push(tport); } else { + /* TTY buffers full; read from RX reg to prevent lockup */ + serial_port_in(port, SCxRDR); serial_port_in(port, SCxSR); /* dummy read */ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); } diff --git a/drivers/tty/serial/tilegx.c b/drivers/tty/serial/tilegx.c deleted file mode 100644 index f0a3ae57f881..000000000000 --- a/drivers/tty/serial/tilegx.c +++ /dev/null @@ -1,689 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2013 Tilera Corporation. All Rights Reserved. - * - * TILEGx UART driver. - */ - -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/serial_core.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> - -#include <gxio/common.h> -#include <gxio/iorpc_globals.h> -#include <gxio/iorpc_uart.h> -#include <gxio/kiorpc.h> - -#include <hv/drv_uart_intf.h> - -/* - * Use device name ttyS, major 4, minor 64-65. - * This is the usual serial port name, 8250 conventional range. - */ -#define TILEGX_UART_MAJOR TTY_MAJOR -#define TILEGX_UART_MINOR 64 -#define TILEGX_UART_NAME "ttyS" -#define DRIVER_NAME_STRING "TILEGx_Serial" -#define TILEGX_UART_REF_CLK 125000000; /* REF_CLK is always 125 MHz. */ - -struct tile_uart_port { - /* UART port. */ - struct uart_port uart; - - /* GXIO device context. */ - gxio_uart_context_t context; - - /* UART access mutex. */ - struct mutex mutex; - - /* CPU receiving interrupts. */ - int irq_cpu; -}; - -static struct tile_uart_port tile_uart_ports[TILEGX_UART_NR]; -static struct uart_driver tilegx_uart_driver; - - -/* - * Read UART rx fifo, and insert the chars into tty buffer. - */ -static void receive_chars(struct tile_uart_port *tile_uart, - struct tty_struct *tty) -{ - int i; - char c; - UART_FIFO_COUNT_t count; - gxio_uart_context_t *context = &tile_uart->context; - struct tty_port *port = tty->port; - - count.word = gxio_uart_read(context, UART_FIFO_COUNT); - for (i = 0; i < count.rfifo_count; i++) { - c = (char)gxio_uart_read(context, UART_RECEIVE_DATA); - tty_insert_flip_char(port, c, TTY_NORMAL); - } -} - - -/* - * Drain the Rx FIFO, called by interrupt handler. - */ -static void handle_receive(struct tile_uart_port *tile_uart) -{ - struct tty_port *port = &tile_uart->uart.state->port; - struct tty_struct *tty = tty_port_tty_get(port); - gxio_uart_context_t *context = &tile_uart->context; - - if (!tty) - return; - - /* First read UART rx fifo. */ - receive_chars(tile_uart, tty); - - /* Reset RFIFO_WE interrupt. */ - gxio_uart_write(context, UART_INTERRUPT_STATUS, - UART_INTERRUPT_MASK__RFIFO_WE_MASK); - - /* Final read, if any chars comes between the first read and - * the interrupt reset. - */ - receive_chars(tile_uart, tty); - - spin_unlock(&tile_uart->uart.lock); - tty_flip_buffer_push(port); - spin_lock(&tile_uart->uart.lock); - tty_kref_put(tty); -} - - -/* - * Push one char to UART Write FIFO. - * Return 0 on success, -1 if write filo is full. - */ -static int tilegx_putchar(gxio_uart_context_t *context, char c) -{ - UART_FLAG_t flag; - flag.word = gxio_uart_read(context, UART_FLAG); - if (flag.wfifo_full) - return -1; - - gxio_uart_write(context, UART_TRANSMIT_DATA, (unsigned long)c); - return 0; -} - - -/* - * Send chars to UART Write FIFO; called by interrupt handler. - */ -static void handle_transmit(struct tile_uart_port *tile_uart) -{ - unsigned char ch; - struct uart_port *port; - struct circ_buf *xmit; - gxio_uart_context_t *context = &tile_uart->context; - - /* First reset WFIFO_RE interrupt. */ - gxio_uart_write(context, UART_INTERRUPT_STATUS, - UART_INTERRUPT_MASK__WFIFO_RE_MASK); - - port = &tile_uart->uart; - xmit = &port->state->xmit; - if (port->x_char) { - if (tilegx_putchar(context, port->x_char)) - return; - port->x_char = 0; - port->icount.tx++; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - while (!uart_circ_empty(xmit)) { - ch = xmit->buf[xmit->tail]; - if (tilegx_putchar(context, ch)) - break; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - /* Reset WFIFO_RE interrupt. */ - gxio_uart_write(context, UART_INTERRUPT_STATUS, - UART_INTERRUPT_MASK__WFIFO_RE_MASK); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - - -/* - * UART Interrupt handler. - */ -static irqreturn_t tilegx_interrupt(int irq, void *dev_id) -{ - unsigned long flags; - UART_INTERRUPT_STATUS_t intr_stat; - struct tile_uart_port *tile_uart; - gxio_uart_context_t *context; - struct uart_port *port = dev_id; - irqreturn_t ret = IRQ_NONE; - - spin_lock_irqsave(&port->lock, flags); - - tile_uart = container_of(port, struct tile_uart_port, uart); - context = &tile_uart->context; - intr_stat.word = gxio_uart_read(context, UART_INTERRUPT_STATUS); - - if (intr_stat.rfifo_we) { - handle_receive(tile_uart); - ret = IRQ_HANDLED; - } - if (intr_stat.wfifo_re) { - handle_transmit(tile_uart); - ret = IRQ_HANDLED; - } - - spin_unlock_irqrestore(&port->lock, flags); - return ret; -} - - -/* - * Return TIOCSER_TEMT when transmitter FIFO is empty. - */ -static u_int tilegx_tx_empty(struct uart_port *port) -{ - int ret; - UART_FLAG_t flag; - struct tile_uart_port *tile_uart; - gxio_uart_context_t *context; - - tile_uart = container_of(port, struct tile_uart_port, uart); - if (!mutex_trylock(&tile_uart->mutex)) - return 0; - context = &tile_uart->context; - - flag.word = gxio_uart_read(context, UART_FLAG); - ret = (flag.wfifo_empty) ? TIOCSER_TEMT : 0; - mutex_unlock(&tile_uart->mutex); - - return ret; -} - - -/* - * Set state of the modem control output lines. - */ -static void tilegx_set_mctrl(struct uart_port *port, u_int mctrl) -{ - /* N/A */ -} - - -/* - * Get state of the modem control input lines. - */ -static u_int tilegx_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - - -/* - * Stop transmitting. - */ -static void tilegx_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - - -/* - * Start transmitting. - */ -static void tilegx_start_tx(struct uart_port *port) -{ - unsigned char ch; - struct circ_buf *xmit; - struct tile_uart_port *tile_uart; - gxio_uart_context_t *context; - - tile_uart = container_of(port, struct tile_uart_port, uart); - if (!mutex_trylock(&tile_uart->mutex)) - return; - context = &tile_uart->context; - xmit = &port->state->xmit; - if (port->x_char) { - if (tilegx_putchar(context, port->x_char)) - return; - port->x_char = 0; - port->icount.tx++; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - mutex_unlock(&tile_uart->mutex); - return; - } - - while (!uart_circ_empty(xmit)) { - ch = xmit->buf[xmit->tail]; - if (tilegx_putchar(context, ch)) - break; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - mutex_unlock(&tile_uart->mutex); -} - - -/* - * Stop receiving - port is in process of being closed. - */ -static void tilegx_stop_rx(struct uart_port *port) -{ - int err; - struct tile_uart_port *tile_uart; - gxio_uart_context_t *context; - int cpu; - - tile_uart = container_of(port, struct tile_uart_port, uart); - if (!mutex_trylock(&tile_uart->mutex)) - return; - - context = &tile_uart->context; - cpu = tile_uart->irq_cpu; - err = gxio_uart_cfg_interrupt(context, cpu_x(cpu), cpu_y(cpu), - KERNEL_PL, -1); - mutex_unlock(&tile_uart->mutex); -} - -/* - * Control the transmission of a break signal. - */ -static void tilegx_break_ctl(struct uart_port *port, int break_state) -{ - /* N/A */ -} - - -/* - * Perform initialization and enable port for reception. - */ -static int tilegx_startup(struct uart_port *port) -{ - struct tile_uart_port *tile_uart; - gxio_uart_context_t *context; - int ret = 0; - int cpu = raw_smp_processor_id(); /* pick an arbitrary cpu */ - - tile_uart = container_of(port, struct tile_uart_port, uart); - if (mutex_lock_interruptible(&tile_uart->mutex)) - return -EBUSY; - context = &tile_uart->context; - - /* Now open the hypervisor device if we haven't already. */ - if (context->fd < 0) { - UART_INTERRUPT_MASK_t intr_mask; - - /* Initialize UART device. */ - ret = gxio_uart_init(context, port->line); - if (ret) { - ret = -ENXIO; - goto err; - } - - /* Create our IRQs. */ - port->irq = irq_alloc_hwirq(-1); - if (!port->irq) - goto err_uart_dest; - tile_irq_activate(port->irq, TILE_IRQ_PERCPU); - - /* Register our IRQs. */ - ret = request_irq(port->irq, tilegx_interrupt, 0, - tilegx_uart_driver.driver_name, port); - if (ret) - goto err_dest_irq; - - /* Request that the hardware start sending us interrupts. */ - tile_uart->irq_cpu = cpu; - ret = gxio_uart_cfg_interrupt(context, cpu_x(cpu), cpu_y(cpu), - KERNEL_PL, port->irq); - if (ret) - goto err_free_irq; - - /* Enable UART Tx/Rx Interrupt. */ - intr_mask.word = gxio_uart_read(context, UART_INTERRUPT_MASK); - intr_mask.wfifo_re = 0; - intr_mask.rfifo_we = 0; - gxio_uart_write(context, UART_INTERRUPT_MASK, intr_mask.word); - - /* Reset the Tx/Rx interrupt in case it's set. */ - gxio_uart_write(context, UART_INTERRUPT_STATUS, - UART_INTERRUPT_MASK__WFIFO_RE_MASK | - UART_INTERRUPT_MASK__RFIFO_WE_MASK); - } - - mutex_unlock(&tile_uart->mutex); - return ret; - -err_free_irq: - free_irq(port->irq, port); -err_dest_irq: - irq_free_hwirq(port->irq); -err_uart_dest: - gxio_uart_destroy(context); - ret = -ENXIO; -err: - mutex_unlock(&tile_uart->mutex); - return ret; -} - - -/* - * Release kernel resources if it is the last close, disable the port, - * free IRQ and close the port. - */ -static void tilegx_shutdown(struct uart_port *port) -{ - int err; - UART_INTERRUPT_MASK_t intr_mask; - struct tile_uart_port *tile_uart; - gxio_uart_context_t *context; - int cpu; - - tile_uart = container_of(port, struct tile_uart_port, uart); - if (mutex_lock_interruptible(&tile_uart->mutex)) - return; - context = &tile_uart->context; - - /* Disable UART Tx/Rx Interrupt. */ - intr_mask.word = gxio_uart_read(context, UART_INTERRUPT_MASK); - intr_mask.wfifo_re = 1; - intr_mask.rfifo_we = 1; - gxio_uart_write(context, UART_INTERRUPT_MASK, intr_mask.word); - - /* Request that the hardware stop sending us interrupts. */ - cpu = tile_uart->irq_cpu; - err = gxio_uart_cfg_interrupt(context, cpu_x(cpu), cpu_y(cpu), - KERNEL_PL, -1); - - if (port->irq > 0) { - free_irq(port->irq, port); - irq_free_hwirq(port->irq); - port->irq = 0; - } - - gxio_uart_destroy(context); - - mutex_unlock(&tile_uart->mutex); -} - - -/* - * Flush the buffer. - */ -static void tilegx_flush_buffer(struct uart_port *port) -{ - /* N/A */ -} - - -/* - * Change the port parameters. - */ -static void tilegx_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - int err; - UART_DIVISOR_t divisor; - UART_TYPE_t type; - unsigned int baud; - struct tile_uart_port *tile_uart; - gxio_uart_context_t *context; - - tile_uart = container_of(port, struct tile_uart_port, uart); - if (!mutex_trylock(&tile_uart->mutex)) - return; - context = &tile_uart->context; - - /* Open the hypervisor device if we haven't already. */ - if (context->fd < 0) { - err = gxio_uart_init(context, port->line); - if (err) { - mutex_unlock(&tile_uart->mutex); - return; - } - } - - divisor.word = gxio_uart_read(context, UART_DIVISOR); - type.word = gxio_uart_read(context, UART_TYPE); - - /* Divisor. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - divisor.divisor = uart_get_divisor(port, baud); - - /* Byte size. */ - if ((termios->c_cflag & CSIZE) == CS7) - type.dbits = UART_TYPE__DBITS_VAL_SEVEN_DBITS; - else - type.dbits = UART_TYPE__DBITS_VAL_EIGHT_DBITS; - - /* Parity. */ - if (termios->c_cflag & PARENB) { - /* Mark or Space parity. */ - if (termios->c_cflag & CMSPAR) - if (termios->c_cflag & PARODD) - type.ptype = UART_TYPE__PTYPE_VAL_MARK; - else - type.ptype = UART_TYPE__PTYPE_VAL_SPACE; - else if (termios->c_cflag & PARODD) - type.ptype = UART_TYPE__PTYPE_VAL_ODD; - else - type.ptype = UART_TYPE__PTYPE_VAL_EVEN; - } else - type.ptype = UART_TYPE__PTYPE_VAL_NONE; - - /* Stop bits. */ - if (termios->c_cflag & CSTOPB) - type.sbits = UART_TYPE__SBITS_VAL_TWO_SBITS; - else - type.sbits = UART_TYPE__SBITS_VAL_ONE_SBITS; - - /* Set the uart paramters. */ - gxio_uart_write(context, UART_DIVISOR, divisor.word); - gxio_uart_write(context, UART_TYPE, type.word); - - mutex_unlock(&tile_uart->mutex); -} - - -/* - * Return string describing the specified port. - */ -static const char *tilegx_type(struct uart_port *port) -{ - return port->type == PORT_TILEGX ? DRIVER_NAME_STRING : NULL; -} - - -/* - * Release the resources being used by 'port'. - */ -static void tilegx_release_port(struct uart_port *port) -{ - /* Nothing to release. */ -} - - -/* - * Request the resources being used by 'port'. - */ -static int tilegx_request_port(struct uart_port *port) -{ - /* Always present. */ - return 0; -} - - -/* - * Configure/autoconfigure the port. - */ -static void tilegx_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_TILEGX; -} - - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - */ -static int tilegx_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_TILEGX)) - return -EINVAL; - - return 0; -} - -#ifdef CONFIG_CONSOLE_POLL - -/* - * Console polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static int tilegx_poll_get_char(struct uart_port *port) -{ - UART_FIFO_COUNT_t count; - gxio_uart_context_t *context; - struct tile_uart_port *tile_uart; - - tile_uart = container_of(port, struct tile_uart_port, uart); - context = &tile_uart->context; - count.word = gxio_uart_read(context, UART_FIFO_COUNT); - if (count.rfifo_count == 0) - return NO_POLL_CHAR; - return (char)gxio_uart_read(context, UART_RECEIVE_DATA); -} - -static void tilegx_poll_put_char(struct uart_port *port, unsigned char c) -{ - gxio_uart_context_t *context; - struct tile_uart_port *tile_uart; - - tile_uart = container_of(port, struct tile_uart_port, uart); - context = &tile_uart->context; - gxio_uart_write(context, UART_TRANSMIT_DATA, (unsigned long)c); -} - -#endif /* CONFIG_CONSOLE_POLL */ - - -static const struct uart_ops tilegx_ops = { - .tx_empty = tilegx_tx_empty, - .set_mctrl = tilegx_set_mctrl, - .get_mctrl = tilegx_get_mctrl, - .stop_tx = tilegx_stop_tx, - .start_tx = tilegx_start_tx, - .stop_rx = tilegx_stop_rx, - .break_ctl = tilegx_break_ctl, - .startup = tilegx_startup, - .shutdown = tilegx_shutdown, - .flush_buffer = tilegx_flush_buffer, - .set_termios = tilegx_set_termios, - .type = tilegx_type, - .release_port = tilegx_release_port, - .request_port = tilegx_request_port, - .config_port = tilegx_config_port, - .verify_port = tilegx_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = tilegx_poll_get_char, - .poll_put_char = tilegx_poll_put_char, -#endif -}; - - -static void tilegx_init_ports(void) -{ - int i; - struct uart_port *port; - - for (i = 0; i < TILEGX_UART_NR; i++) { - port = &tile_uart_ports[i].uart; - port->ops = &tilegx_ops; - port->line = i; - port->type = PORT_TILEGX; - port->uartclk = TILEGX_UART_REF_CLK; - port->flags = UPF_BOOT_AUTOCONF; - - tile_uart_ports[i].context.fd = -1; - mutex_init(&tile_uart_ports[i].mutex); - } -} - - -static struct uart_driver tilegx_uart_driver = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME_STRING, - .dev_name = TILEGX_UART_NAME, - .major = TILEGX_UART_MAJOR, - .minor = TILEGX_UART_MINOR, - .nr = TILEGX_UART_NR, -}; - - -static int __init tilegx_init(void) -{ - int i; - int ret; - struct tty_driver *tty_drv; - - ret = uart_register_driver(&tilegx_uart_driver); - if (ret) - return ret; - tty_drv = tilegx_uart_driver.tty_driver; - tty_drv->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; - tty_drv->init_termios.c_ispeed = 115200; - tty_drv->init_termios.c_ospeed = 115200; - - tilegx_init_ports(); - - for (i = 0; i < TILEGX_UART_NR; i++) { - struct uart_port *port = &tile_uart_ports[i].uart; - ret = uart_add_one_port(&tilegx_uart_driver, port); - } - - return 0; -} - - -static void __exit tilegx_exit(void) -{ - int i; - struct uart_port *port; - - for (i = 0; i < TILEGX_UART_NR; i++) { - port = &tile_uart_ports[i].uart; - uart_remove_one_port(&tilegx_uart_driver, port); - } - - uart_unregister_driver(&tilegx_uart_driver); -} - - -module_init(tilegx_init); -module_exit(tilegx_exit); - -MODULE_AUTHOR("Tilera Corporation"); -MODULE_DESCRIPTION("TILEGx serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index b674793be478..6364890575ec 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -660,7 +660,7 @@ static void sysrq_do_reset(struct timer_list *t) state->reset_requested = true; - sys_sync(); + ksys_sync(); kernel_restart(NULL); } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index eb9133b472f4..63114ea35ec1 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -586,6 +586,14 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) return; } + /* + * Some console devices aren't actually hung up for technical and + * historical reasons, which can lead to indefinite interruptible + * sleep in n_tty_read(). The following explicitly tells + * n_tty_read() to abort readers. + */ + set_bit(TTY_HUPPING, &tty->flags); + /* inuse_filps is protected by the single tty lock, this really needs to change if we want to flush the workqueue with the lock held */ @@ -640,6 +648,7 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) * from the ldisc side, which is now guaranteed. */ set_bit(TTY_HUPPED, &tty->flags); + clear_bit(TTY_HUPPING, &tty->flags); tty_unlock(tty); if (f) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 88b902c525d7..b4e57c5a8bba 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1727,7 +1727,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) default_attr(vc); update_attr(vc); - vc->vc_tab_stop[0] = 0x01010100; + vc->vc_tab_stop[0] = vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = @@ -1771,7 +1771,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_pos -= (vc->vc_x << 1); while (vc->vc_x < vc->vc_cols - 1) { vc->vc_x++; - if (vc->vc_tab_stop[vc->vc_x >> 5] & (1 << (vc->vc_x & 31))) + if (vc->vc_tab_stop[7 & (vc->vc_x >> 5)] & (1 << (vc->vc_x & 31))) break; } vc->vc_pos += (vc->vc_x << 1); @@ -1831,7 +1831,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) lf(vc); return; case 'H': - vc->vc_tab_stop[vc->vc_x >> 5] |= (1 << (vc->vc_x & 31)); + vc->vc_tab_stop[7 & (vc->vc_x >> 5)] |= (1 << (vc->vc_x & 31)); return; case 'Z': respond_ID(tty); @@ -2024,7 +2024,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) return; case 'g': if (!vc->vc_par[0]) - vc->vc_tab_stop[vc->vc_x >> 5] &= ~(1 << (vc->vc_x & 31)); + vc->vc_tab_stop[7 & (vc->vc_x >> 5)] &= ~(1 << (vc->vc_x & 31)); else if (vc->vc_par[0] == 3) { vc->vc_tab_stop[0] = vc->vc_tab_stop[1] = diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index d61be307256a..a78ad10a119b 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -57,7 +57,7 @@ extern struct tty_driver *console_driver; */ #ifdef CONFIG_X86 -#include <linux/syscalls.h> +#include <asm/syscalls.h> #endif static void complete_change_console(struct vc_data *vc); @@ -420,12 +420,12 @@ int vt_ioctl(struct tty_struct *tty, ret = -EINVAL; break; } - ret = sys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0; + ret = ksys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0; break; case KDENABIO: case KDDISABIO: - ret = sys_ioperm(GPFIRST, GPNUM, + ret = ksys_ioperm(GPFIRST, GPNUM, (cmd == KDENABIO)) ? -ENXIO : 0; break; #endif |