1 files changed, 107 insertions, 30 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 93720bdc9efd..90ae1753dda1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -339,7 +339,8 @@ static int get_hub_status(struct usb_device *hdev,
 {
 	int i, status = -ETIMEDOUT;
 
-	for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
 		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
 			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
 			data, sizeof(*data), USB_STS_TIMEOUT);
@@ -355,7 +356,8 @@ static int get_port_status(struct usb_device *hdev, int port1,
 {
 	int i, status = -ETIMEDOUT;
 
-	for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
 		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
 			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
 			data, sizeof(*data), USB_STS_TIMEOUT);
@@ -379,15 +381,6 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 		*status = le16_to_cpu(hub->status->port.wPortStatus);
 		*change = le16_to_cpu(hub->status->port.wPortChange);
 
-		if ((hub->hdev->parent != NULL) &&
-				hub_is_superspeed(hub->hdev)) {
-			/* Translate the USB 3 port status */
-			u16 tmp = *status & USB_SS_PORT_STAT_MASK;
-			if (*status & USB_SS_PORT_STAT_POWER)
-				tmp |= USB_PORT_STAT_POWER;
-			*status = tmp;
-		}
-
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -2160,11 +2153,76 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 	return status;
 }
 
+/* Warm reset a USB3 protocol port */
+static int hub_port_warm_reset(struct usb_hub *hub, int port)
+{
+	int ret;
+	u16 portstatus, portchange;
+
+	if (!hub_is_superspeed(hub->hdev)) {
+		dev_err(hub->intfdev, "only USB3 hub support warm reset\n");
+		return -EINVAL;
+	}
+
+	/* Warm reset the port */
+	ret = set_port_feature(hub->hdev,
+				port, USB_PORT_FEAT_BH_PORT_RESET);
+	if (ret) {
+		dev_err(hub->intfdev, "cannot warm reset port %d\n", port);
+		return ret;
+	}
+
+	msleep(20);
+	ret = hub_port_status(hub, port, &portstatus, &portchange);
+
+	if (portchange & USB_PORT_STAT_C_RESET)
+		clear_port_feature(hub->hdev, port, USB_PORT_FEAT_C_RESET);
+
+	if (portchange & USB_PORT_STAT_C_BH_RESET)
+		clear_port_feature(hub->hdev, port,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+
+	if (portchange & USB_PORT_STAT_C_LINK_STATE)
+		clear_port_feature(hub->hdev, port,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+
+	return ret;
+}
+
+/* Check if a port is power on */
+static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if (portstatus & USB_SS_PORT_STAT_POWER)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_POWER)
+			ret = 1;
+	}
+
+	return ret;
+}
+
 #ifdef	CONFIG_PM
 
-#define MASK_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | \
-				USB_PORT_STAT_SUSPEND)
-#define WANT_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION)
+/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
+static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if ((portstatus & USB_PORT_STAT_LINK_STATE)
+				== USB_SS_PORT_LS_U3)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_SUSPEND)
+			ret = 1;
+	}
+
+	return ret;
+}
 
 /* Determine whether the device on a port is ready for a normal resume,
  * is ready for a reset-resume, or should be disconnected.
@@ -2174,7 +2232,9 @@ static int check_port_resume_type(struct usb_device *udev,
 		int status, unsigned portchange, unsigned portstatus)
 {
 	/* Is the device still present? */
-	if (status || (portstatus & MASK_BITS) != WANT_BITS) {
+	if (status || port_is_suspended(hub, portstatus) ||
+			!port_is_power_on(hub, portstatus) ||
+			!(portstatus & USB_PORT_STAT_CONNECTION)) {
 		if (status >= 0)
 			status = -ENODEV;
 	}
@@ -2285,14 +2345,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	}
 
 	/* see 7.1.7.6 */
-	/* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0
-	 * external hub.
-	 * FIXME: this is a temporary workaround to make the system able
-	 * to suspend/resume.
-	 */
-	if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev))
-		status = clear_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_POWER);
+	if (hub_is_superspeed(hub->hdev))
+		status = set_port_feature(hub->hdev,
+				port1 | (USB_SS_PORT_LS_U3 << 3),
+				USB_PORT_FEAT_LINK_STATE);
 	else
 		status = set_port_feature(hub->hdev, port1,
 						USB_PORT_FEAT_SUSPEND);
@@ -2439,7 +2495,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 	/* Skip the initial Clear-Suspend step for a remote wakeup */
 	status = hub_port_status(hub, port1, &portstatus, &portchange);
-	if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+	if (status == 0 && !port_is_suspended(hub, portstatus))
 		goto SuspendCleared;
 
 	// dev_dbg(hub->intfdev, "resume port %d\n", port1);
@@ -2447,8 +2503,13 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	set_bit(port1, hub->busy_bits);
 
 	/* see 7.1.7.7; affects power usage, but not budgeting */
-	status = clear_port_feature(hub->hdev,
-			port1, USB_PORT_FEAT_SUSPEND);
+	if (hub_is_superspeed(hub->hdev))
+		status = set_port_feature(hub->hdev,
+				port1 | (USB_SS_PORT_LS_U0 << 3),
+				USB_PORT_FEAT_LINK_STATE);
+	else
+		status = clear_port_feature(hub->hdev,
+				port1, USB_PORT_FEAT_SUSPEND);
 	if (status) {
 		dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
 				port1, status);
@@ -2470,9 +2531,15 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
  SuspendCleared:
 	if (status == 0) {
-		if (portchange & USB_PORT_STAT_C_SUSPEND)
-			clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_SUSPEND);
+		if (hub_is_superspeed(hub->hdev)) {
+			if (portchange & USB_PORT_STAT_C_LINK_STATE)
+				clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
+		}
 	}
 
 	clear_bit(port1, hub->busy_bits);
@@ -3147,7 +3214,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
 		/* maybe switch power back on (e.g. root hub was reset) */
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-				&& !(portstatus & USB_PORT_STAT_POWER))
+				&& !port_is_power_on(hub, portstatus))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
 		if (portstatus & USB_PORT_STAT_ENABLE)
@@ -3490,6 +3557,16 @@ static void hub_events(void)
 						USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
 			}
 
+			/* Warm reset a USB3 protocol port if it's in
+			 * SS.Inactive state.
+			 */
+			if (hub_is_superspeed(hub->hdev) &&
+				(portstatus & USB_PORT_STAT_LINK_STATE)
+					== USB_SS_PORT_LS_SS_INACTIVE) {
+				dev_dbg(hub_dev, "warm reset port %d\n", i);
+				hub_port_warm_reset(hub, i);
+			}
+
 			if (connect_change)
 				hub_port_connect_change(hub, i,
 						portstatus, portchange);