diff options
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/usb/core/devices.c | 9 | ||||
| -rw-r--r-- | drivers/usb/core/devio.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/driver.c | 304 | ||||
| -rw-r--r-- | drivers/usb/core/endpoint.c | 98 | ||||
| -rw-r--r-- | drivers/usb/core/hcd.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 234 | ||||
| -rw-r--r-- | drivers/usb/core/hub.h | 41 | ||||
| -rw-r--r-- | drivers/usb/core/message.c | 8 | ||||
| -rw-r--r-- | drivers/usb/core/usb.c | 160 | ||||
| -rw-r--r-- | drivers/usb/core/usb.h | 9 |
11 files changed, 489 insertions, 397 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 6e3b5358a760..f8324d8d06ac 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -72,6 +72,21 @@ config USB_SUSPEND If you are unsure about this, say N here. +config USB_MULTITHREAD_PROBE + bool "USB Multi-threaded probe (EXPERIMENTAL)" + depends on USB && EXPERIMENTAL + default n + help + Say Y here if you want the USB core to spawn a new thread for + every USB device that is probed. This can cause a small speedup + in boot times on systems with a lot of different USB devices. + + This option should be safe to enable, but if any odd probing + problems are found, please disable it, or dynamically turn it + off in the /sys/module/usbcore/parameters/multithread_probe + file + + When in doubt, say N. config USB_OTG bool diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 3538c2fdadfe..ea398e5d50af 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -175,12 +175,13 @@ static char *usb_dump_endpoint_descriptor ( ) { char dir, unit, *type; - unsigned interval, in, bandwidth = 1; + unsigned interval, bandwidth = 1; if (start > end) return start; - in = (desc->bEndpointAddress & USB_DIR_IN); - dir = in ? 'I' : 'O'; + + dir = usb_endpoint_dir_in(desc) ? 'I' : 'O'; + if (speed == USB_SPEED_HIGH) { switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) { case 1 << 11: bandwidth = 2; break; @@ -204,7 +205,7 @@ static char *usb_dump_endpoint_descriptor ( break; case USB_ENDPOINT_XFER_BULK: type = "Bulk"; - if (speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */ interval = desc->bInterval; else interval = 0; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index fed92be63b5e..3ed4cb2d56d9 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -561,7 +561,7 @@ static int usbdev_open(struct inode *inode, struct file *file) dev = inode->i_private; if (!dev) goto out; - ret = usb_autoresume_device(dev, 1); + ret = usb_autoresume_device(dev); if (ret) goto out; @@ -609,7 +609,7 @@ static int usbdev_release(struct inode *inode, struct file *file) releaseintf(ps, ifnum); } destroy_all_async(ps); - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); usb_unlock_device(dev); usb_put_dev(dev); put_pid(ps->disc_pid); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 113e484c763e..d6eb5ce1dd1d 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -205,7 +205,7 @@ static int usb_probe_interface(struct device *dev) if (id) { dev_dbg(dev, "%s - got id\n", __FUNCTION__); - error = usb_autoresume_device(udev, 1); + error = usb_autoresume_device(udev); if (error) return error; @@ -229,7 +229,7 @@ static int usb_probe_interface(struct device *dev) } else intf->condition = USB_INTERFACE_BOUND; - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); } return error; @@ -247,7 +247,7 @@ static int usb_unbind_interface(struct device *dev) /* Autoresume for set_interface call below */ udev = interface_to_usbdev(intf); - error = usb_autoresume_device(udev, 1); + error = usb_autoresume_device(udev); /* release all urbs for this interface */ usb_disable_interface(interface_to_usbdev(intf), intf); @@ -265,7 +265,7 @@ static int usb_unbind_interface(struct device *dev) intf->needs_remote_wakeup = 0; if (!error) - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); return 0; } @@ -408,6 +408,16 @@ static int usb_match_one_id(struct usb_interface *interface, (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) return 0; + /* The interface class, subclass, and protocol should never be + * checked for a match if the device class is Vendor Specific, + * unless the match record specifies the Vendor ID. */ + if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC && + !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS | + USB_DEVICE_ID_MATCH_INT_PROTOCOL))) + return 0; + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && (id->bInterfaceClass != intf->desc.bInterfaceClass)) return 0; @@ -476,7 +486,17 @@ static int usb_match_one_id(struct usb_interface *interface, * most general; they let drivers bind to any interface on a * multiple-function device. Use the USB_INTERFACE_INFO * macro, or its siblings, to match class-per-interface style - * devices (as recorded in bDeviceClass). + * devices (as recorded in bInterfaceClass). + * + * Note that an entry created by USB_INTERFACE_INFO won't match + * any interface if the device class is set to Vendor-Specific. + * This is deliberate; according to the USB spec the meanings of + * the interface class/subclass/protocol for these devices are also + * vendor-specific, and hence matching against a standard product + * class wouldn't work anyway. If you really want to use an + * interface-based match for such a device, create a match record + * that also specifies the vendor ID. (Unforunately there isn't a + * standard macro for creating records like this.) * * Within those groups, remember that not all combinations are * meaningful. For example, don't give a product version range @@ -505,7 +525,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface, } EXPORT_SYMBOL_GPL_FUTURE(usb_match_id); -int usb_device_match(struct device *dev, struct device_driver *drv) +static int usb_device_match(struct device *dev, struct device_driver *drv) { /* devices and interfaces are handled separately */ if (is_usb_device(dev)) { @@ -790,7 +810,7 @@ EXPORT_SYMBOL_GPL_FUTURE(usb_deregister); #ifdef CONFIG_PM /* Caller has locked udev's pm_mutex */ -static int suspend_device(struct usb_device *udev, pm_message_t msg) +static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; int status = 0; @@ -817,7 +837,7 @@ done: } /* Caller has locked udev's pm_mutex */ -static int resume_device(struct usb_device *udev) +static int usb_resume_device(struct usb_device *udev) { struct usb_device_driver *udriver; int status = 0; @@ -843,7 +863,7 @@ done: } /* Caller has locked intf's usb_device's pm mutex */ -static int suspend_interface(struct usb_interface *intf, pm_message_t msg) +static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg) { struct usb_driver *driver; int status = 0; @@ -880,7 +900,7 @@ done: } /* Caller has locked intf's usb_device's pm_mutex */ -static int resume_interface(struct usb_interface *intf) +static int usb_resume_interface(struct usb_interface *intf) { struct usb_driver *driver; int status = 0; @@ -920,6 +940,44 @@ done: return status; } +#ifdef CONFIG_USB_SUSPEND + +/* Internal routine to check whether we may autosuspend a device. */ +static int autosuspend_check(struct usb_device *udev) +{ + int i; + struct usb_interface *intf; + + /* For autosuspend, fail fast if anything is in use. + * Also fail if any interfaces require remote wakeup but it + * isn't available. */ + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + if (udev->pm_usage_cnt > 0) + return -EBUSY; + if (udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + if (!is_active(intf)) + continue; + if (intf->pm_usage_cnt > 0) + return -EBUSY; + if (intf->needs_remote_wakeup && + !udev->do_remote_wakeup) { + dev_dbg(&udev->dev, "remote wakeup needed " + "for autosuspend\n"); + return -EOPNOTSUPP; + } + } + } + return 0; +} + +#else + +#define autosuspend_check(udev) 0 + +#endif + /** * usb_suspend_both - suspend a USB device and its interfaces * @udev: the usb_device to suspend @@ -971,52 +1029,34 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) udev->do_remote_wakeup = device_may_wakeup(&udev->dev); - /* For autosuspend, fail fast if anything is in use. - * Also fail if any interfaces require remote wakeup but it - * isn't available. */ if (udev->auto_pm) { - if (udev->pm_usage_cnt > 0) - return -EBUSY; - if (udev->actconfig) { - for (; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - if (!is_active(intf)) - continue; - if (intf->pm_usage_cnt > 0) - return -EBUSY; - if (intf->needs_remote_wakeup && - !udev->do_remote_wakeup) { - dev_dbg(&udev->dev, - "remote wakeup needed for autosuspend\n"); - return -EOPNOTSUPP; - } - } - i = 0; - } + status = autosuspend_check(udev); + if (status < 0) + return status; } /* Suspend all the interfaces and then udev itself */ if (udev->actconfig) { for (; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - status = suspend_interface(intf, msg); + status = usb_suspend_interface(intf, msg); if (status != 0) break; } } if (status == 0) - status = suspend_device(udev, msg); + status = usb_suspend_device(udev, msg); /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { while (--i >= 0) { intf = udev->actconfig->interface[i]; - resume_interface(intf); + usb_resume_interface(intf); } /* If the suspend succeeded, propagate it up the tree */ } else if (parent) - usb_autosuspend_device(parent, 0); + usb_autosuspend_device(parent); // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); return status; @@ -1064,9 +1104,25 @@ int usb_resume_both(struct usb_device *udev) /* Propagate the resume up the tree, if necessary */ if (udev->state == USB_STATE_SUSPENDED) { if (parent) { - usb_pm_lock(parent); - parent->auto_pm = 1; - status = usb_resume_both(parent); + status = usb_autoresume_device(parent); + if (status == 0) { + status = usb_resume_device(udev); + if (status) { + usb_autosuspend_device(parent); + + /* It's possible usb_resume_device() + * failed after the port was + * unsuspended, causing udev to be + * logically disconnected. We don't + * want usb_disconnect() to autosuspend + * the parent again, so tell it that + * udev disconnected while still + * suspended. */ + if (udev->state == + USB_STATE_NOTATTACHED) + udev->discon_suspended = 1; + } + } } else { /* We can't progagate beyond the USB subsystem, @@ -1075,24 +1131,20 @@ int usb_resume_both(struct usb_device *udev) if (udev->dev.parent->power.power_state.event != PM_EVENT_ON) status = -EHOSTUNREACH; - } - if (status == 0) - status = resume_device(udev); - if (parent) - usb_pm_unlock(parent); + else + status = usb_resume_device(udev); + } } else { /* Needed only for setting udev->dev.power.power_state.event * and for possible debugging message. */ - status = resume_device(udev); + status = usb_resume_device(udev); } - /* Now the parent won't suspend until we are finished */ - if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - resume_interface(intf); + usb_resume_interface(intf); } } @@ -1102,39 +1154,53 @@ int usb_resume_both(struct usb_device *udev) #ifdef CONFIG_USB_SUSPEND +/* Internal routine to adjust a device's usage counter and change + * its autosuspend state. + */ +static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) +{ + int status = 0; + + usb_pm_lock(udev); + udev->pm_usage_cnt += inc_usage_cnt; + WARN_ON(udev->pm_usage_cnt < 0); + if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + udev->pm_usage_cnt -= inc_usage_cnt; + } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) + queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + usb_pm_unlock(udev); + return status; +} + /** * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces * @udev: the usb_device to autosuspend - * @dec_usage_cnt: flag to decrement @udev's PM-usage counter * * This routine should be called when a core subsystem is finished using * @udev and wants to allow it to autosuspend. Examples would be when * @udev's device file in usbfs is closed or after a configuration change. * - * @dec_usage_cnt should be 1 if the subsystem previously incremented - * @udev's usage counter (such as by passing 1 to usb_autoresume_device); - * otherwise it should be 0. - * - * If the usage counter for @udev or any of its active interfaces is greater - * than 0, the autosuspend request will not be queued. (If an interface - * driver does not support autosuspend then its usage counter is permanently - * positive.) Likewise, if an interface driver requires remote-wakeup - * capability during autosuspend but remote wakeup is disabled, the - * autosuspend will fail. + * @udev's usage counter is decremented. If it or any of the usage counters + * for an active interface is greater than 0, no autosuspend request will be + * queued. (If an interface driver does not support autosuspend then its + * usage counter is permanently positive.) Furthermore, if an interface + * driver requires remote-wakeup capability during autosuspend but remote + * wakeup is disabled, the autosuspend will fail. * * Often the caller will hold @udev's device lock, but this is not * necessary. * * This routine can run only in process context. */ -void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) +void usb_autosuspend_device(struct usb_device *udev) { - usb_pm_lock(udev); - udev->pm_usage_cnt -= dec_usage_cnt; - if (udev->pm_usage_cnt <= 0) - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); - usb_pm_unlock(udev); + int status; + + status = usb_autopm_do_device(udev, -1); // dev_dbg(&udev->dev, "%s: cnt %d\n", // __FUNCTION__, udev->pm_usage_cnt); } @@ -1142,44 +1208,59 @@ void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) /** * usb_autoresume_device - immediately autoresume a USB device and its interfaces * @udev: the usb_device to autoresume - * @inc_usage_cnt: flag to increment @udev's PM-usage counter * * This routine should be called when a core subsystem wants to use @udev - * and needs to guarantee that it is not suspended. In addition, the - * caller can prevent @udev from being autosuspended subsequently. (Note - * that this will not prevent suspend events originating in the PM core.) - * Examples would be when @udev's device file in usbfs is opened (autosuspend - * should be prevented until the file is closed) or when a remote-wakeup - * request is received (later autosuspends should not be prevented). + * and needs to guarantee that it is not suspended. No autosuspend will + * occur until usb_autosuspend_device is called. (Note that this will not + * prevent suspend events originating in the PM core.) Examples would be + * when @udev's device file in usbfs is opened or when a remote-wakeup + * request is received. * - * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent - * autosuspends. This prevention will persist until the usage counter is - * decremented again (such as by passing 1 to usb_autosuspend_device). - * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged. - * Regardless, if the autoresume fails then the usage counter is not - * incremented. + * @udev's usage counter is incremented to prevent subsequent autosuspends. + * However if the autoresume fails then the usage counter is re-decremented. * * Often the caller will hold @udev's device lock, but this is not * necessary (and attempting it might cause deadlock). * * This routine can run only in process context. */ -int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) +int usb_autoresume_device(struct usb_device *udev) { int status; - usb_pm_lock(udev); - udev->pm_usage_cnt += inc_usage_cnt; - udev->auto_pm = 1; - status = usb_resume_both(udev); - if (status != 0) - udev->pm_usage_cnt -= inc_usage_cnt; - usb_pm_unlock(udev); + status = usb_autopm_do_device(udev, 1); // dev_dbg(&udev->dev, "%s: status %d cnt %d\n", // __FUNCTION__, status, udev->pm_usage_cnt); return status; } +/* Internal routine to adjust an interface's usage counter and change + * its device's autosuspend state. + */ +static int usb_autopm_do_interface(struct usb_interface *intf, + int inc_usage_cnt) +{ + struct usb_device *udev = interface_to_usbdev(intf); + int status = 0; + + usb_pm_lock(udev); + if (intf->condition == USB_INTERFACE_UNBOUND) + status = -ENODEV; + else { + intf->pm_usage_cnt += inc_usage_cnt; + if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) { + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + intf->pm_usage_cnt -= inc_usage_cnt; + } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) + queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + } + usb_pm_unlock(udev); + return status; +} + /** * usb_autopm_put_interface - decrement a USB interface's PM-usage counter * @intf: the usb_interface whose counter should be decremented @@ -1213,17 +1294,11 @@ int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) */ void usb_autopm_put_interface(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); + int status; - usb_pm_lock(udev); - if (intf->condition != USB_INTERFACE_UNBOUND && - --intf->pm_usage_cnt <= 0) { - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); - } - usb_pm_unlock(udev); - // dev_dbg(&intf->dev, "%s: cnt %d\n", - // __FUNCTION__, intf->pm_usage_cnt); + status = usb_autopm_do_interface(intf, -1); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface); @@ -1260,26 +1335,37 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); */ int usb_autopm_get_interface(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); - int status; + int status; - usb_pm_lock(udev); - if (intf->condition == USB_INTERFACE_UNBOUND) - status = -ENODEV; - else { - ++intf->pm_usage_cnt; - udev->auto_pm = 1; - status = usb_resume_both(udev); - if (status != 0) - --intf->pm_usage_cnt; - } - usb_pm_unlock(udev); + status = usb_autopm_do_interface(intf, 1); // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", // __FUNCTION__, status, intf->pm_usage_cnt); return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); +/** + * usb_autopm_set_interface - set a USB interface's autosuspend state + * @intf: the usb_interface whose state should be set + * + * This routine sets the autosuspend state of @intf's device according + * to @intf's usage counter, which the caller must have set previously. + * If the counter is <= 0, the device is autosuspended (if it isn't + * already suspended and if nothing else prevents the autosuspend). If + * the counter is > 0, the device is autoresumed (if it isn't already + * awake). + */ +int usb_autopm_set_interface(struct usb_interface *intf) +{ + int status; + + status = usb_autopm_do_interface(intf, 0); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); + return status; +} +EXPORT_SYMBOL_GPL(usb_autopm_set_interface); + #endif /* CONFIG_USB_SUSPEND */ static int usb_suspend(struct device *dev, pm_message_t message) diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 3b2d137912be..c505b767cee1 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -10,15 +10,20 @@ */ #include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/idr.h> #include <linux/usb.h> #include "usb.h" -/* endpoint stuff */ +#define MAX_ENDPOINT_MINORS (64*128*32) +static int usb_endpoint_major; +static DEFINE_IDR(endpoint_idr); struct ep_device { struct usb_endpoint_descriptor *desc; struct usb_device *udev; struct device dev; + int minor; }; #define to_ep_device(_dev) \ container_of(_dev, struct ep_device, dev) @@ -152,6 +157,55 @@ static struct attribute_group ep_dev_attr_grp = { .attrs = ep_dev_attrs, }; +static int usb_endpoint_major_init(void) +{ + dev_t dev; + int error; + + error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS, + "usb_endpoint"); + if (error) { + err("unable to get a dynamic major for usb endpoints"); + return error; + } + usb_endpoint_major = MAJOR(dev); + + return error; +} + +static void usb_endpoint_major_cleanup(void) +{ + unregister_chrdev_region(MKDEV(usb_endpoint_major, 0), + MAX_ENDPOINT_MINORS); +} + +static int endpoint_get_minor(struct ep_device *ep_dev) +{ + static DEFINE_MUTEX(minor_lock); + int retval = -ENOMEM; + int id; + + mutex_lock(&minor_lock); + if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0) + goto exit; + + retval = idr_get_new(&endpoint_idr, ep_dev, &id); + if (retval < 0) { + if (retval == -EAGAIN) + retval = -ENOMEM; + goto exit; + } + ep_dev->minor = id & MAX_ID_MASK; +exit: + mutex_unlock(&minor_lock); + return retval; +} + +static void endpoint_free_minor(struct ep_device *ep_dev) +{ + idr_remove(&endpoint_idr, ep_dev->minor); +} + static struct endpoint_class { struct kref kref; struct class *class; @@ -176,11 +230,20 @@ static int init_endpoint_class(void) ep_class->class = class_create(THIS_MODULE, "usb_endpoint"); if (IS_ERR(ep_class->class)) { result = IS_ERR(ep_class->class); - kfree(ep_class); - ep_class = NULL; - goto exit; + goto class_create_error; } + result = usb_endpoint_major_init(); + if (result) + goto endpoint_major_error; + + goto exit; + +endpoint_major_error: + class_destroy(ep_class->class); +class_create_error: + kfree(ep_class); + ep_class = NULL; exit: return result; } @@ -191,6 +254,7 @@ static void release_endpoint_class(struct kref *kref) class_destroy(ep_class->class); kfree(ep_class); ep_class = NULL; + usb_endpoint_major_cleanup(); } static void destroy_endpoint_class(void) @@ -213,7 +277,6 @@ int usb_create_ep_files(struct device *parent, { char name[8]; struct ep_device *ep_dev; - int minor; int retval; retval = init_endpoint_class(); @@ -226,12 +289,16 @@ int usb_create_ep_files(struct device *parent, goto error_alloc; } - /* fun calculation to determine the minor of this endpoint */ - minor = (((udev->bus->busnum - 1) * 128) * 16) + (udev->devnum - 1); + retval = endpoint_get_minor(ep_dev); + if (retval) { + dev_err(parent, "can not allocate minor number for %s", + ep_dev->dev.bus_id); + goto error_register; + } ep_dev->desc = &endpoint->desc; ep_dev->udev = udev; - ep_dev->dev.devt = MKDEV(442, minor); // FIXME fake number... + ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor); ep_dev->dev.class = ep_class->class; ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; @@ -241,7 +308,7 @@ int usb_create_ep_files(struct device *parent, retval = device_register(&ep_dev->dev); if (retval) - goto error_register; + goto error_chrdev; retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); if (retval) goto error_group; @@ -261,6 +328,9 @@ error_group: destroy_endpoint_class(); return retval; +error_chrdev: + endpoint_free_minor(ep_dev); + error_register: kfree(ep_dev); error_alloc: @@ -271,14 +341,16 @@ exit: void usb_remove_ep_files(struct usb_host_endpoint *endpoint) { + struct ep_device *ep_dev = endpoint->ep_dev; - if (endpoint->ep_dev) { + if (ep_dev) { char name[8]; sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress); - sysfs_remove_link(&endpoint->ep_dev->dev.parent->kobj, name); - sysfs_remove_group(&endpoint->ep_dev->dev.kobj, &ep_dev_attr_grp); - device_unregister(&endpoint->ep_dev->dev); + sysfs_remove_link(&ep_dev->dev.parent->kobj, name); + sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); + endpoint_free_minor(ep_dev); + device_unregister(&ep_dev->dev); endpoint->ep_dev = NULL; destroy_endpoint_class(); } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index afa2dd203329..10064af65d17 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -256,7 +256,9 @@ static const u8 hs_rh_config_descriptor [] = { 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) + * see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ }; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index ad0ffbe8f7d7..39186db1015f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -31,6 +31,47 @@ #include "hcd.h" #include "hub.h" +struct usb_hub { + struct device *intfdev; /* the "interface" device */ + struct usb_device *hdev; + struct urb *urb; /* for interrupt polling pipe */ + + /* buffer for urb ... with extra space in case of babble */ + char (*buffer)[8]; + dma_addr_t buffer_dma; /* DMA address for buffer */ + union { + struct usb_hub_status hub; + struct usb_port_status port; + } *status; /* buffer for status reports */ + + int error; /* last reported error */ + int nerrors; /* track consecutive errors */ + + struct list_head event_list; /* hubs w/data or errs ready */ + unsigned long event_bits[1]; /* status change bitmask */ + unsigned long change_bits[1]; /* ports with logical connect + status change */ + unsigned long busy_bits[1]; /* ports being reset or + resumed */ +#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ +#error event_bits[] is too short! +#endif + + struct usb_hub_descriptor *descriptor; /* class descriptor */ + struct usb_tt tt; /* Transaction Translator */ + + unsigned mA_per_port; /* current for each child */ + + unsigned limited_power:1; + unsigned quiescing:1; + unsigned activating:1; + + unsigned has_indicators:1; + u8 indicator[USB_MAXCHILDREN]; + struct work_struct leds; +}; + + /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ @@ -45,6 +86,16 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); static struct task_struct *khubd_task; +/* multithreaded probe logic */ +static int multithread_probe = +#ifdef CONFIG_USB_MULTITHREAD_PROBE + 1; +#else + 0; +#endif +module_param(multithread_probe, bool, S_IRUGO); +MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread"); + /* cycle leds on hubs that aren't blinking for attention */ static int blinkenlights = 0; module_param (blinkenlights, bool, S_IRUGO); @@ -277,6 +328,9 @@ static void kick_khubd(struct usb_hub *hub) { unsigned long flags; + /* Suppress autosuspend until khubd runs */ + to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; + spin_lock_irqsave(&hub_event_lock, flags); if (list_empty(&hub->event_list)) { list_add_tail(&hub->event_list, &hub_event_list); @@ -459,7 +513,6 @@ static void hub_quiesce(struct usb_hub *hub) /* (nonblocking) khubd and related activity won't re-trigger */ hub->quiescing = 1; hub->activating = 0; - hub->resume_root_hub = 0; /* (blocking) stop khubd and related activity */ usb_kill_urb(hub->urb); @@ -475,7 +528,7 @@ static void hub_activate(struct usb_hub *hub) hub->quiescing = 0; hub->activating = 1; - hub->resume_root_hub = 0; + status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) dev_err(hub->intfdev, "activate --> %d\n", status); @@ -761,7 +814,12 @@ static int hub_configure(struct usb_hub *hub, dev_dbg(hub_dev, "%sover-current condition exists\n", (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no "); - /* set up the interrupt endpoint */ + /* set up the interrupt endpoint + * We use the EP's maxpacket size instead of (PORTS+1+7)/8 + * bytes as USB2.0[11.12.3] says because some hubs are known + * to send more data (and thus cause overflow). For root hubs, + * maxpktsize is defined in hcd.c's fake endpoint descriptors + * to be big enough for at least USB_MAXCHILDREN ports. */ pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe)); @@ -885,6 +943,7 @@ descriptor_error: INIT_DELAYED_WORK(&hub->leds, led_work); usb_set_intfdata (intf, hub); + intf->needs_remote_wakeup = 1; if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs++; @@ -982,6 +1041,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev) if (udev->children[i]) recursively_mark_NOTATTACHED(udev->children[i]); } + if (udev->state == USB_STATE_SUSPENDED) + udev->discon_suspended = 1; udev->state = USB_STATE_NOTATTACHED; } @@ -1171,6 +1232,14 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); + /* Decrement the parent's count of unsuspended children */ + if (udev->parent) { + usb_pm_lock(udev); + if (!udev->discon_suspended) + usb_autosuspend_device(udev->parent); + usb_pm_unlock(udev); + } + put_device(&udev->dev); } @@ -1193,29 +1262,17 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) static int __usb_port_suspend(struct usb_device *, int port1); #endif -/** - * usb_new_device - perform initial device setup (usbcore-internal) - * @udev: newly addressed device (in ADDRESS state) - * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors - * for any device configuration. The caller must have locked either - * the parent hub (if udev is a normal device) or else the - * usb_bus_list_lock (if udev is a root hub). The parent's pointer to - * udev has already been installed, but udev is not yet visible through - * sysfs or other filesystem code. - * - * Returns 0 for success (device is configured and listed, with its - * interfaces, in sysfs); else a negative errno value. - * - * This call is synchronous, and may not be used in an interrupt context. - * - * Only the hub driver or root-hub registrar should ever call this. - */ -int usb_new_device(struct usb_device *udev) +static int __usb_new_device(void *void_data) { + struct usb_device *udev = void_data; int err; + /* Lock ourself into memory in order to keep a probe sequence + * sleeping in a new thread from allowing us to be unloaded. + */ + if (!try_module_get(THIS_MODULE)) + return -EINVAL; + err = usb_get_configuration(udev); if (err < 0) { dev_err(&udev->dev, "can't read configurations, error %d\n", @@ -1311,13 +1368,56 @@ int usb_new_device(struct usb_device *udev) goto fail; } - return 0; + /* Increment the parent's count of unsuspended children */ + if (udev->parent) + usb_autoresume_device(udev->parent); + +exit: + module_put(THIS_MODULE); + return err; fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); - return err; + goto exit; } +/** + * usb_new_device - perform initial device setup (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is called with devices which have been enumerated, but not yet + * configured. The device descriptor is available, but not descriptors + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the + * usb_bus_list_lock (if udev is a root hub). The parent's pointer to + * udev has already been installed, but udev is not yet visible through + * sysfs or other filesystem code. + * + * The return value for this function depends on if the + * multithread_probe variable is set or not. If it's set, it will + * return a if the probe thread was successfully created or not. If the + * variable is not set, it will return if the device is configured + * properly or not. interfaces, in sysfs); else a negative errno value. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Only the hub driver or root-hub registrar should ever call this. + */ +int usb_new_device(struct usb_device *udev) +{ + struct task_struct *probe_task; + int ret = 0; + + if (multithread_probe) { + probe_task = kthread_run(__usb_new_device, udev, + "usb-probe-%s", udev->devnum); + if (IS_ERR(probe_task)) + ret = PTR_ERR(probe_task); + } else + ret = __usb_new_device(udev); + + return ret; +} static int hub_port_status(struct usb_hub *hub, int port1, u16 *status, u16 *change) @@ -1325,10 +1425,12 @@ static int hub_port_status(struct usb_hub *hub, int port1, int ret; ret = get_port_status(hub->hdev, port1, &hub->status->port); - if (ret < 0) + if (ret < 4) { dev_err (hub->intfdev, "%s failed (err = %d)\n", __FUNCTION__, ret); - else { + if (ret >= 0) + ret = -EIO; + } else { *status = le16_to_cpu(hub->status->port.wPortStatus); *change = le16_to_cpu(hub->status->port.wPortChange); ret = 0; @@ -1676,6 +1778,12 @@ static int hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) { int status; + u16 portchange, portstatus; + + /* Skip the initial Clear-Suspend step for a remote wakeup */ + status = hub_port_status(hub, port1, &portstatus, &portchange); + if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND)) + goto SuspendCleared; // dev_dbg(hub->intfdev, "resume port %d\n", port1); @@ -1689,9 +1797,6 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) "can't resume port %d, status %d\n", port1, status); } else { - u16 devstatus; - u16 portchange; - /* drive resume for at least 20 msec */ if (udev) dev_dbg(&udev->dev, "usb %sresume\n", @@ -1706,16 +1811,15 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) * stop resume signaling. Then finish the resume * sequence. */ - devstatus = portchange = 0; - status = hub_port_status(hub, port1, - &devstatus, &portchange); + status = hub_port_status(hub, port1, &portstatus, &portchange); +SuspendCleared: if (status < 0 - || (devstatus & LIVE_FLAGS) != LIVE_FLAGS - || (devstatus & USB_PORT_STAT_SUSPEND) != 0 + || (portstatus & LIVE_FLAGS) != LIVE_FLAGS + || (portstatus & USB_PORT_STAT_SUSPEND) != 0 ) { dev_dbg(hub->intfdev, "port %d status %04x.%04x after resume, %d\n", - port1, portchange, devstatus, status); + port1, portchange, portstatus, status); if (status >= 0) status = -ENODEV; } else { @@ -1776,23 +1880,16 @@ static int remote_wakeup(struct usb_device *udev) { int status = 0; - /* All this just to avoid sending a port-resume message - * to the parent hub! */ - usb_lock_device(udev); - usb_pm_lock(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); - /* TRSMRCY = 10 msec */ - msleep(10); - status = finish_port_resume(udev); + status = usb_autoresume_device(udev); + + /* Give the interface drivers a chance to do something, + * then autosuspend the device again. */ if (status == 0) - udev->dev.power.power_state.event = PM_EVENT_ON; + usb_autosuspend_device(udev); } - usb_pm_unlock(udev); - - if (status == 0) - usb_autoresume_device(udev, 0); usb_unlock_device(udev); return status; } @@ -1856,6 +1953,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) } } + dev_dbg(&intf->dev, "%s\n", __FUNCTION__); + /* "global suspend" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; @@ -1878,10 +1977,12 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) static int hub_resume(struct usb_interface *intf) { - struct usb_device *hdev = interface_to_usbdev(intf); struct usb_hub *hub = usb_get_intfdata (intf); + struct usb_device *hdev = hub->hdev; int status; + dev_dbg(&intf->dev, "%s\n", __FUNCTION__); + /* "global resume" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; @@ -1920,7 +2021,6 @@ void usb_resume_root_hub(struct usb_device *hdev) { struct usb_hub *hub = hdev_to_hub(hdev); - hub->resume_root_hub = 1; kick_khubd(hub); } @@ -2557,16 +2657,13 @@ static void hub_events(void) intf = to_usb_interface(hub->intfdev); hub_dev = &intf->dev; - i = hub->resume_root_hub; - - dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n", + dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", hdev->state, hub->descriptor ? hub->descriptor->bNbrPorts : 0, /* NOTE: expects max 15 ports... */ (u16) hub->change_bits[0], - (u16) hub->event_bits[0], - i ? ", resume root" : ""); + (u16) hub->event_bits[0]); usb_get_intf(intf); spin_unlock_irq(&hub_event_lock); @@ -2587,16 +2684,16 @@ static void hub_events(void) goto loop; } - /* Is this is a root hub wanting to reactivate the downstream - * ports? If so, be sure the interface resumes even if its - * stub "device" node was never suspended. - */ - if (i) - usb_autoresume_device(hdev, 0); + /* Autoresume */ + ret = usb_autopm_get_interface(intf); + if (ret) { + dev_dbg(hub_dev, "Can't autoresume: %d\n", ret); + goto loop; + } - /* If this is an inactive or suspended hub, do nothing */ + /* If this is an inactive hub, do nothing */ if (hub->quiescing) - goto loop; + goto loop_autopm; if (hub->error) { dev_dbg (hub_dev, "resetting for error %d\n", @@ -2606,7 +2703,7 @@ static void hub_events(void) if (ret) { dev_dbg (hub_dev, "error resetting hub: %d\n", ret); - goto loop; + goto loop_autopm; } hub->nerrors = 0; @@ -2734,6 +2831,10 @@ static void hub_events(void) if (!hdev->parent && !hub->busy_bits[0]) usb_enable_root_hub_irq(hdev->bus); +loop_autopm: + /* Allow autosuspend if we're not going to run again */ + if (list_empty(&hub->event_list)) + usb_autopm_enable(intf); loop: usb_unlock_device(hdev); usb_put_intf(intf); @@ -2775,6 +2876,7 @@ static struct usb_driver hub_driver = { .post_reset = hub_post_reset, .ioctl = hub_ioctl, .id_table = hub_id_table, + .supports_autosuspend = 1, }; int usb_hub_init(void) @@ -2999,7 +3101,7 @@ int usb_reset_composite_device(struct usb_device *udev, } /* Prevent autosuspend during the reset */ - usb_autoresume_device(udev, 1); + usb_autoresume_device(udev); if (iface && iface->condition != USB_INTERFACE_BINDING) iface = NULL; @@ -3042,7 +3144,7 @@ int usb_reset_composite_device(struct usb_device *udev, } } - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); return ret; } EXPORT_SYMBOL(usb_reset_composite_device); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 035d3ef35888..cf9559c6c9b6 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -192,45 +192,4 @@ struct usb_tt_clear { extern void usb_hub_tt_clear_buffer (struct usb_device *dev, int pipe); -struct usb_hub { - struct device *intfdev; /* the "interface" device */ - struct usb_device *hdev; - struct urb *urb; /* for interrupt polling pipe */ - - /* buffer for urb ... with extra space in case of babble */ - char (*buffer)[8]; - dma_addr_t buffer_dma; /* DMA address for buffer */ - union { - struct usb_hub_status hub; - struct usb_port_status port; - } *status; /* buffer for status reports */ - - int error; /* last reported error */ - int nerrors; /* track consecutive errors */ - - struct list_head event_list; /* hubs w/data or errs ready */ - unsigned long event_bits[1]; /* status change bitmask */ - unsigned long change_bits[1]; /* ports with logical connect - status change */ - unsigned long busy_bits[1]; /* ports being reset or - resumed */ -#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ -#error event_bits[] is too short! -#endif - - struct usb_hub_descriptor *descriptor; /* class descriptor */ - struct usb_tt tt; /* Transaction Translator */ - - unsigned mA_per_port; /* current for each child */ - - unsigned limited_power:1; - unsigned quiescing:1; - unsigned activating:1; - unsigned resume_root_hub:1; - - unsigned has_indicators:1; - enum hub_led_mode indicator[USB_MAXCHILDREN]; - struct delayed_work leds; -}; - #endif /* __LINUX_HUB_H */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 89572bc021b1..7390b67c609d 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -764,7 +764,7 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) err = -EINVAL; goto errout; } else { - dev->have_langid = -1; + dev->have_langid = 1; dev->string_langid = tbuf[2] | (tbuf[3]<< 8); /* always use the first langid listed */ dev_dbg (&dev->dev, "default language 0x%04x\n", @@ -1398,7 +1398,7 @@ free_interfaces: } /* Wake up the device so we can send it the Set-Config request */ - ret = usb_autoresume_device(dev, 1); + ret = usb_autoresume_device(dev); if (ret) goto free_interfaces; @@ -1421,7 +1421,7 @@ free_interfaces: dev->actconfig = cp; if (!cp) { usb_set_device_state(dev, USB_STATE_ADDRESS); - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); goto free_interfaces; } usb_set_device_state(dev, USB_STATE_CONFIGURED); @@ -1490,7 +1490,7 @@ free_interfaces: usb_create_sysfs_intf_files (intf); } - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); return 0; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index ab2f68fc7d2d..02426d0b9a34 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -200,13 +200,6 @@ static void ksuspend_usb_cleanup(void) destroy_workqueue(ksuspend_usb_wq); } -#else - -#define ksuspend_usb_init() 0 -#define ksuspend_usb_cleanup() do {} while (0) - -#endif - #ifdef CONFIG_USB_SUSPEND /* usb_autosuspend_work - callback routine to autosuspend a USB device */ @@ -226,7 +219,14 @@ static void usb_autosuspend_work(struct work_struct *work) static void usb_autosuspend_work(struct work_struct *work) {} -#endif +#endif /* CONFIG_USB_SUSPEND */ + +#else + +#define ksuspend_usb_init() 0 +#define ksuspend_usb_cleanup() do {} while (0) + +#endif /* CONFIG_PM */ /** * usb_alloc_dev - usb device constructor (usbcore-internal) @@ -538,138 +538,6 @@ int usb_get_current_frame_number(struct usb_device *dev) return usb_hcd_get_frame_number (dev); } -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); -} - /*-------------------------------------------------------------------*/ /* * __usb_get_extra_descriptor() finds a descriptor of specific type in the @@ -1103,18 +971,6 @@ EXPORT_SYMBOL(__usb_get_extra_descriptor); EXPORT_SYMBOL(usb_find_device); EXPORT_SYMBOL(usb_get_current_frame_number); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_in); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_out); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out); - EXPORT_SYMBOL (usb_buffer_alloc); EXPORT_SYMBOL (usb_buffer_free); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 13322e33f912..17830a81be14 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -64,14 +64,13 @@ static inline void usb_pm_unlock(struct usb_device *udev) {} #define USB_AUTOSUSPEND_DELAY (HZ*2) -extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt); -extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt); +extern void usb_autosuspend_device(struct usb_device *udev); +extern int usb_autoresume_device(struct usb_device *udev); #else -#define usb_autosuspend_device(udev, dec_busy_cnt) do {} while (0) -static inline int usb_autoresume_device(struct usb_device *udev, - int inc_busy_cnt) +#define usb_autosuspend_device(udev) do {} while (0) +static inline int usb_autoresume_device(struct usb_device *udev) { return 0; } |