diff options
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 2105 |
1 files changed, 2105 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c new file mode 100644 index 000000000000..25dbd8614e72 --- /dev/null +++ b/drivers/usb/dwc3/gadget.c @@ -0,0 +1,2105 @@ +/** + * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "core.h" +#include "gadget.h" +#include "io.h" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +void dwc3_map_buffer_to_dma(struct dwc3_request *req) +{ + struct dwc3 *dwc = req->dep->dwc; + + if (req->request.length == 0) { + /* req->request.dma = dwc->setup_buf_addr; */ + return; + } + + if (req->request.dma == DMA_ADDR_INVALID) { + req->request.dma = dma_map_single(dwc->dev, req->request.buf, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = true; + } +} + +void dwc3_unmap_buffer_from_dma(struct dwc3_request *req) +{ + struct dwc3 *dwc = req->dep->dwc; + + if (req->request.length == 0) { + req->request.dma = DMA_ADDR_INVALID; + return; + } + + if (req->mapped) { + dma_unmap_single(dwc->dev, req->request.dma, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 0; + req->request.dma = DMA_ADDR_INVALID; + } +} + +void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, + int status) +{ + struct dwc3 *dwc = dep->dwc; + + if (req->queued) { + dep->busy_slot++; + /* + * Skip LINK TRB. We can't use req->trb and check for + * DWC3_TRBCTL_LINK_TRB because it points the TRB we just + * completed (not the LINK TRB). + */ + if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + usb_endpoint_xfer_isoc(dep->desc)) + dep->busy_slot++; + } + list_del(&req->list); + + if (req->request.status == -EINPROGRESS) + req->request.status = status; + + dwc3_unmap_buffer_from_dma(req); + + dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", + req, dep->name, req->request.actual, + req->request.length, status); + + spin_unlock(&dwc->lock); + req->request.complete(&req->dep->endpoint, &req->request); + spin_lock(&dwc->lock); +} + +static const char *dwc3_gadget_ep_cmd_string(u8 cmd) +{ + switch (cmd) { + case DWC3_DEPCMD_DEPSTARTCFG: + return "Start New Configuration"; + case DWC3_DEPCMD_ENDTRANSFER: + return "End Transfer"; + case DWC3_DEPCMD_UPDATETRANSFER: + return "Update Transfer"; + case DWC3_DEPCMD_STARTTRANSFER: + return "Start Transfer"; + case DWC3_DEPCMD_CLEARSTALL: + return "Clear Stall"; + case DWC3_DEPCMD_SETSTALL: + return "Set Stall"; + case DWC3_DEPCMD_GETSEQNUMBER: + return "Get Data Sequence Number"; + case DWC3_DEPCMD_SETTRANSFRESOURCE: + return "Set Endpoint Transfer Resource"; + case DWC3_DEPCMD_SETEPCONFIG: + return "Set Endpoint Configuration"; + default: + return "UNKNOWN command"; + } +} + +int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +{ + struct dwc3_ep *dep = dwc->eps[ep]; + u32 timeout = 500; + u32 reg; + + dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n", + dep->name, + dwc3_gadget_ep_cmd_string(cmd), params->param0, + params->param1, params->param2); + + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0); + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1); + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2); + + dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT); + do { + reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep)); + if (!(reg & DWC3_DEPCMD_CMDACT)) { + dev_vdbg(dwc->dev, "Command Complete --> %d\n", + DWC3_DEPCMD_STATUS(reg)); + return 0; + } + + /* + * We can't sleep here, because it is also called from + * interrupt context. + */ + timeout--; + if (!timeout) + return -ETIMEDOUT; + + udelay(1); + } while (1); +} + +static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep, + struct dwc3_trb_hw *trb) +{ + u32 offset = (char *) trb - (char *) dep->trb_pool; + + return dep->trb_pool_dma + offset; +} + +static int dwc3_alloc_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + if (dep->trb_pool) + return 0; + + if (dep->number == 0 || dep->number == 1) + return 0; + + dep->trb_pool = dma_alloc_coherent(dwc->dev, + sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + &dep->trb_pool_dma, GFP_KERNEL); + if (!dep->trb_pool) { + dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n", + dep->name); + return -ENOMEM; + } + + return 0; +} + +static void dwc3_free_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + dep->trb_pool, dep->trb_pool_dma); + + dep->trb_pool = NULL; + dep->trb_pool_dma = 0; +} + +static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + + memset(¶ms, 0x00, sizeof(params)); + + if (dep->number != 1) { + cmd = DWC3_DEPCMD_DEPSTARTCFG; + /* XferRscIdx == 0 for ep0 and 2 for the remaining */ + if (dep->number > 1) { + if (dwc->start_config_issued) + return 0; + dwc->start_config_issued = true; + cmd |= DWC3_DEPCMD_PARAM(2); + } + + return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + } + + return 0; +} + +static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc)) + | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)) + | DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst); + + params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN + | DWC3_DEPCFG_XFER_NOT_READY_EN; + + if (usb_endpoint_xfer_bulk(desc) && dep->endpoint.max_streams) { + params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE + | DWC3_DEPCFG_STREAM_EVENT_EN; + dep->stream_capable = true; + } + + if (usb_endpoint_xfer_isoc(desc)) + params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN; + + /* + * We are doing 1:1 mapping for endpoints, meaning + * Physical Endpoints 2 maps to Logical Endpoint 2 and + * so on. We consider the direction bit as part of the physical + * endpoint number. So USB endpoint 0x81 is 0x03. + */ + params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number); + + /* + * We must use the lower 16 TX FIFOs even though + * HW might have more + */ + if (dep->direction) + params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1); + + if (desc->bInterval) { + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1); + dep->interval = 1 << (desc->bInterval - 1); + } + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETEPCONFIG, ¶ms); +} + +static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms); +} + +/** + * __dwc3_gadget_ep_enable - Initializes a HW endpoint + * @dep: endpoint to be initialized + * @desc: USB Endpoint Descriptor + * + * Caller should take care of locking + */ +static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3 *dwc = dep->dwc; + u32 reg; + int ret = -ENOMEM; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + ret = dwc3_gadget_start_config(dwc, dep); + if (ret) + return ret; + } + + ret = dwc3_gadget_set_ep_config(dwc, dep, desc); + if (ret) + return ret; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + struct dwc3_trb_hw *trb_st_hw; + struct dwc3_trb_hw *trb_link_hw; + struct dwc3_trb trb_link; + + ret = dwc3_gadget_set_xfer_resource(dwc, dep); + if (ret) + return ret; + + dep->desc = desc; + dep->type = usb_endpoint_type(desc); + dep->flags |= DWC3_EP_ENABLED; + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg |= DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + if (!usb_endpoint_xfer_isoc(desc)) + return 0; + + memset(&trb_link, 0, sizeof(trb_link)); + + /* Link TRB for ISOC. The HWO but is never reset */ + trb_st_hw = &dep->trb_pool[0]; + + trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw); + trb_link.trbctl = DWC3_TRBCTL_LINK_TRB; + trb_link.hwo = true; + + trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1]; + dwc3_trb_to_hw(&trb_link, trb_link_hw); + } + + return 0; +} + +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum); +static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_request *req; + + if (!list_empty(&dep->req_queued)) + dwc3_stop_active_transfer(dwc, dep->number); + + while (!list_empty(&dep->request_list)) { + req = next_request(&dep->request_list); + + dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + } +} + +/** + * __dwc3_gadget_ep_disable - Disables a HW endpoint + * @dep: the endpoint to disable + * + * This function also removes requests which are currently processed ny the + * hardware and those which are not yet scheduled. + * Caller should take care of locking. + */ +static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + u32 reg; + + dwc3_remove_requests(dwc, dep); + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg &= ~DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + dep->stream_capable = false; + dep->desc = NULL; + dep->type = 0; + dep->flags = 0; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EINVAL; +} + +static int dwc3_gadget_ep0_disable(struct usb_ep *ep) +{ + return -EINVAL; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + pr_debug("dwc3: missing wMaxPacketSize\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + strncat(dep->name, "-control", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_ISOC: + strncat(dep->name, "-isoc", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_BULK: + strncat(dep->name, "-bulk", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_INT: + strncat(dep->name, "-int", sizeof(dep->name)); + break; + default: + dev_err(dwc->dev, "invalid endpoint transfer type\n"); + } + + if (dep->flags & DWC3_EP_ENABLED) { + dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", + dep->name); + return 0; + } + + dev_vdbg(dwc->dev, "Enabling %s\n", dep->name); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_enable(dep, desc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_disable(struct usb_ep *ep) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n", + dep->name); + return 0; + } + + snprintf(dep->name, sizeof(dep->name), "ep%d%s", + dep->number >> 1, + (dep->number & 1) ? "in" : "out"); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_disable(dep); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct dwc3_request *req; + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) { + dev_err(dwc->dev, "not enough memory\n"); + return NULL; + } + + req->epnum = dep->number; + req->dep = dep; + req->request.dma = DMA_ADDR_INVALID; + + return &req->request; +} + +static void dwc3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + + kfree(req); +} + +/* + * dwc3_prepare_trbs - setup TRBs from requests + * @dep: endpoint for which requests are being prepared + * @starting: true if the endpoint is idle and no requests are queued. + * + * The functions goes through the requests list and setups TRBs for the + * transfers. The functions returns once there are not more TRBs available or + * it run out of requests. + */ +static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep, + bool starting) +{ + struct dwc3_request *req, *n, *ret = NULL; + struct dwc3_trb_hw *trb_hw; + struct dwc3_trb trb; + u32 trbs_left; + + BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); + + /* the first request must not be queued */ + trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK; + /* + * if busy & slot are equal than it is either full or empty. If we are + * starting to proceed requests then we are empty. Otherwise we ar + * full and don't do anything + */ + if (!trbs_left) { + if (!starting) + return NULL; + trbs_left = DWC3_TRB_NUM; + /* + * In case we start from scratch, we queue the ISOC requests + * starting from slot 1. This is done because we use ring + * buffer and have no LST bit to stop us. Instead, we place + * IOC bit TRB_NUM/4. We try to avoid to having an interrupt + * after the first request so we start at slot 1 and have + * 7 requests proceed before we hit the first IOC. + * Other transfer types don't use the ring buffer and are + * processed from the first TRB until the last one. Since we + * don't wrap around we have to start at the beginning. + */ + if (usb_endpoint_xfer_isoc(dep->desc)) { + dep->busy_slot = 1; + dep->free_slot = 1; + } else { + dep->busy_slot = 0; + dep->free_slot = 0; + } + } + + /* The last TRB is a link TRB, not used for xfer */ + if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc)) + return NULL; + + list_for_each_entry_safe(req, n, &dep->request_list, list) { + unsigned int last_one = 0; + unsigned int cur_slot; + + trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK]; + cur_slot = dep->free_slot; + dep->free_slot++; + + /* Skip the LINK-TRB on ISOC */ + if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + usb_endpoint_xfer_isoc(dep->desc)) + continue; + + dwc3_gadget_move_request_queued(req); + memset(&trb, 0, sizeof(trb)); + trbs_left--; + + /* Is our TRB pool empty? */ + if (!trbs_left) + last_one = 1; + /* Is this the last request? */ + if (list_empty(&dep->request_list)) + last_one = 1; + + /* + * FIXME we shouldn't need to set LST bit always but we are + * facing some weird problem with the Hardware where it doesn't + * complete even though it has been previously started. + * + * While we're debugging the problem, as a workaround to + * multiple TRBs handling, use only one TRB at a time. + */ + last_one = 1; + + req->trb = trb_hw; + if (!ret) + ret = req; + + trb.bplh = req->request.dma; + + if (usb_endpoint_xfer_isoc(dep->desc)) { + trb.isp_imi = true; + trb.csp = true; + } else { + trb.lst = last_one; + } + + if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable) + trb.sid_sofn = req->request.stream_id; + + switch (usb_endpoint_type(dep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP; + break; + + case USB_ENDPOINT_XFER_ISOC: + trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; + + /* IOC every DWC3_TRB_NUM / 4 so we can refill */ + if (!(cur_slot % (DWC3_TRB_NUM / 4))) + trb.ioc = last_one; + break; + + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + trb.trbctl = DWC3_TRBCTL_NORMAL; + break; + default: + /* + * This is only possible with faulty memory because we + * checked it already :) + */ + BUG(); + } + + trb.length = req->request.length; + trb.hwo = true; + + dwc3_trb_to_hw(&trb, trb_hw); + req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw); + + if (last_one) + break; + } + + return ret; +} + +static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, + int start_new) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_request *req; + struct dwc3 *dwc = dep->dwc; + int ret; + u32 cmd; + + if (start_new && (dep->flags & DWC3_EP_BUSY)) { + dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name); + return -EBUSY; + } + dep->flags &= ~DWC3_EP_PENDING_REQUEST; + + /* + * If we are getting here after a short-out-packet we don't enqueue any + * new requests as we try to set the IOC bit only on the last request. + */ + if (start_new) { + if (list_empty(&dep->req_queued)) + dwc3_prepare_trbs(dep, start_new); + + /* req points to the first request which will be sent */ + req = next_request(&dep->req_queued); + } else { + /* + * req points to the first request where HWO changed + * from 0 to 1 + */ + req = dwc3_prepare_trbs(dep, start_new); + } + if (!req) { + dep->flags |= DWC3_EP_PENDING_REQUEST; + return 0; + } + + memset(¶ms, 0, sizeof(params)); + params.param0 = upper_32_bits(req->trb_dma); + params.param1 = lower_32_bits(req->trb_dma); + + if (start_new) + cmd = DWC3_DEPCMD_STARTTRANSFER; + else + cmd = DWC3_DEPCMD_UPDATETRANSFER; + + cmd |= DWC3_DEPCMD_PARAM(cmd_param); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + if (ret < 0) { + dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n"); + + /* + * FIXME we need to iterate over the list of requests + * here and stop, unmap, free and del each of the linked + * requests instead of we do now. + */ + dwc3_unmap_buffer_from_dma(req); + list_del(&req->list); + return ret; + } + + dep->flags |= DWC3_EP_BUSY; + dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->number); + if (!dep->res_trans_idx) + printk_once(KERN_ERR "%s() res_trans_idx is invalid\n", __func__); + return 0; +} + +static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) +{ + req->request.actual = 0; + req->request.status = -EINPROGRESS; + req->direction = dep->direction; + req->epnum = dep->number; + + /* + * We only add to our list of requests now and + * start consuming the list once we get XferNotReady + * IRQ. + * + * That way, we avoid doing anything that we don't need + * to do now and defer it until the point we receive a + * particular token from the Host side. + * + * This will also avoid Host cancelling URBs due to too + * many NACKs. + */ + dwc3_map_buffer_to_dma(req); + list_add_tail(&req->list, &dep->request_list); + + /* + * There is one special case: XferNotReady with + * empty list of requests. We need to kick the + * transfer here in that situation, otherwise + * we will be NAKing forever. + * + * If we get XferNotReady before gadget driver + * has a chance to queue a request, we will ACK + * the IRQ but won't be able to receive the data + * until the next request is queued. The following + * code is handling exactly that. + */ + if (dep->flags & DWC3_EP_PENDING_REQUEST) { + int ret; + int start_trans; + + start_trans = 1; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + dep->flags & DWC3_EP_BUSY) + start_trans = 0; + + ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans); + if (ret && ret != -EBUSY) { + struct dwc3 *dwc = dep->dwc; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + }; + + return 0; +} + +static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + if (!dep->desc) { + dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", + request, ep->name); + return -ESHUTDOWN; + } + + dev_vdbg(dwc->dev, "queing request %p to %s length %d\n", + request, ep->name, request->length); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_queue(dep, req); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_request *r = NULL; + + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&dwc->lock, flags); + + list_for_each_entry(r, &dep->request_list, list) { + if (r == req) + break; + } + + if (r != req) { + list_for_each_entry(r, &dep->req_queued, list) { + if (r == req) + break; + } + if (r == req) { + /* wait until it is processed */ + dwc3_stop_active_transfer(dwc, dep->number); + goto out0; + } + dev_err(dwc->dev, "request %p was not queued to %s\n", + request, ep->name); + ret = -EINVAL; + goto out0; + } + + /* giveback the request */ + dwc3_gadget_giveback(dep, req, -ECONNRESET); + +out0: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc = dep->dwc; + int ret; + + memset(¶ms, 0x00, sizeof(params)); + + if (value) { + if (dep->number == 0 || dep->number == 1) { + /* + * Whenever EP0 is stalled, we will restart + * the state machine, thus moving back to + * Setup Phase + */ + dwc->ep0state = EP0_SETUP_PHASE; + } + + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETSTALL, ¶ms); + if (ret) + dev_err(dwc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", + dep->name); + else + dep->flags |= DWC3_EP_STALL; + } else { + if (dep->flags & DWC3_EP_WEDGE) + return 0; + + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_CLEARSTALL, ¶ms); + if (ret) + dev_err(dwc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", + dep->name); + else + dep->flags &= ~DWC3_EP_STALL; + } + + return ret; +} + +static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + + if (usb_endpoint_xfer_isoc(dep->desc)) { + dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name); + ret = -EINVAL; + goto out; + } + + ret = __dwc3_gadget_ep_set_halt(dep, value); +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + + dep->flags |= DWC3_EP_WEDGE; + + return dwc3_gadget_ep_set_halt(ep, 1); +} + +/* -------------------------------------------------------------------------- */ + +static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, +}; + +static const struct usb_ep_ops dwc3_gadget_ep0_ops = { + .enable = dwc3_gadget_ep0_enable, + .disable = dwc3_gadget_ep0_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep0_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +static const struct usb_ep_ops dwc3_gadget_ep_ops = { + .enable = dwc3_gadget_ep_enable, + .disable = dwc3_gadget_ep_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_get_frame(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + return DWC3_DSTS_SOFFN(reg); +} + +static int dwc3_gadget_wakeup(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + unsigned long timeout; + unsigned long flags; + + u32 reg; + + int ret = 0; + + u8 link_state; + u8 speed; + + spin_lock_irqsave(&dwc->lock, flags); + + /* + * According to the Databook Remote wakeup request should + * be issued only when the device is in early suspend state. + * + * We can check that via USB Link State bits in DSTS register. + */ + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + speed = reg & DWC3_DSTS_CONNECTSPD; + if (speed == DWC3_DSTS_SUPERSPEED) { + dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n"); + ret = -EINVAL; + goto out; + } + + link_state = DWC3_DSTS_USBLNKST(reg); + + switch (link_state) { + case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ + case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ + break; + default: + dev_dbg(dwc->dev, "can't wakeup from link state %d\n", + link_state); + ret = -EINVAL; + goto out; + } + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + + /* + * Switch link state to Recovery. In HS/FS/LS this means + * RemoteWakeup Request + */ + reg |= DWC3_DCTL_ULSTCHNG_RECOVERY; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* wait for at least 2000us */ + usleep_range(2000, 2500); + + /* write zeroes to Link Change Request */ + reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* pool until Link State change to ON */ + timeout = jiffies + msecs_to_jiffies(100); + + while (!(time_after(jiffies, timeout))) { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + /* in HS, means ON */ + if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0) + break; + } + + if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) { + dev_err(dwc->dev, "failed to send remote wakeup\n"); + ret = -EINVAL; + } + +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, + int is_selfpowered) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + dwc->is_selfpowered = !!is_selfpowered; + + return 0; +} + +static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) +{ + u32 reg; + u32 timeout = 500; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (is_on) + reg |= DWC3_DCTL_RUN_STOP; + else + reg &= ~DWC3_DCTL_RUN_STOP; + + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + do { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + if (is_on) { + if (!(reg & DWC3_DSTS_DEVCTRLHLT)) + break; + } else { + if (reg & DWC3_DSTS_DEVCTRLHLT) + break; + } + timeout--; + if (!timeout) + break; + udelay(1); + } while (1); + + dev_vdbg(dwc->dev, "gadget %s data soft-%s\n", + dwc->gadget_driver + ? dwc->gadget_driver->function : "no-function", + is_on ? "connect" : "disconnect"); +} + +static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + is_on = !!is_on; + + spin_lock_irqsave(&dwc->lock, flags); + dwc3_gadget_run_stop(dwc, is_on); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static int dwc3_gadget_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + struct dwc3_ep *dep; + unsigned long flags; + int ret = 0; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + + if (dwc->gadget_driver) { + dev_err(dwc->dev, "%s is already bound to %s\n", + dwc->gadget.name, + dwc->gadget_driver->driver.name); + ret = -EBUSY; + goto err0; + } + + dwc->gadget_driver = driver; + dwc->gadget.dev.driver = &driver->driver; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + + reg &= ~DWC3_GCTL_SCALEDOWN(3); + reg &= ~DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG); + reg &= ~DWC3_GCTL_DISSCRAMBLE; + reg |= DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE); + + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams0)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + dev_dbg(dwc->dev, "No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * when The device fails to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter in a Connect/Disconnect loop + */ + if (dwc->revision < DWC3_REVISION_190A) + reg |= DWC3_GCTL_U2RSTECN; + + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_SPEED_MASK); + reg |= DWC3_DCFG_SUPERSPEED; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + dwc->start_config_issued = false; + + /* Start with SuperSpeed Default */ + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err0; + } + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err1; + } + + /* begin to receive SETUP packets */ + dwc->ep0state = EP0_SETUP_PHASE; + dwc3_ep0_out_start(dwc); + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; + +err1: + __dwc3_gadget_ep_disable(dwc->eps[0]); + +err0: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + __dwc3_gadget_ep_disable(dwc->eps[0]); + __dwc3_gadget_ep_disable(dwc->eps[1]); + + dwc->gadget_driver = NULL; + dwc->gadget.dev.driver = NULL; + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} +static const struct usb_gadget_ops dwc3_gadget_ops = { + .get_frame = dwc3_gadget_get_frame, + .wakeup = dwc3_gadget_wakeup, + .set_selfpowered = dwc3_gadget_set_selfpowered, + .pullup = dwc3_gadget_pullup, + .udc_start = dwc3_gadget_start, + .udc_stop = dwc3_gadget_stop, +}; + +/* -------------------------------------------------------------------------- */ + +static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + u8 epnum; + + INIT_LIST_HEAD(&dwc->gadget.ep_list); + + for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + dep = kzalloc(sizeof(*dep), GFP_KERNEL); + if (!dep) { + dev_err(dwc->dev, "can't allocate endpoint %d\n", + epnum); + return -ENOMEM; + } + + dep->dwc = dwc; + dep->number = epnum; + dwc->eps[epnum] = dep; + + snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1, + (epnum & 1) ? "in" : "out"); + dep->endpoint.name = dep->name; + dep->direction = (epnum & 1); + + if (epnum == 0 || epnum == 1) { + dep->endpoint.maxpacket = 512; + dep->endpoint.ops = &dwc3_gadget_ep0_ops; + if (!epnum) + dwc->gadget.ep0 = &dep->endpoint; + } else { + int ret; + + dep->endpoint.maxpacket = 1024; + dep->endpoint.max_streams = 15; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget.ep_list); + + ret = dwc3_alloc_trb_pool(dep); + if (ret) { + dev_err(dwc->dev, "%s: failed to allocate TRB pool\n", dep->name); + return ret; + } + } + INIT_LIST_HEAD(&dep->request_list); + INIT_LIST_HEAD(&dep->req_queued); + } + + return 0; +} + +static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + u8 epnum; + + for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + dep = dwc->eps[epnum]; + dwc3_free_trb_pool(dep); + + if (epnum != 0 && epnum != 1) + list_del(&dep->endpoint.ep_list); + + kfree(dep); + } +} + +static void dwc3_gadget_release(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); +} + +/* -------------------------------------------------------------------------- */ +static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3_request *req; + struct dwc3_trb trb; + unsigned int count; + unsigned int s_pkt = 0; + + do { + req = next_request(&dep->req_queued); + if (!req) + break; + + dwc3_trb_to_nat(req->trb, &trb); + + if (trb.hwo && status != -ESHUTDOWN) + /* + * We continue despite the error. There is not much we + * can do. If we don't clean in up we loop for ever. If + * we skip the TRB than it gets overwritten reused after + * a while since we use them in a ring buffer. a BUG() + * would help. Lets hope that if this occures, someone + * fixes the root cause instead of looking away :) + */ + dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", + dep->name, req->trb); + count = trb.length; + + if (dep->direction) { + if (count) { + dev_err(dwc->dev, "incomplete IN transfer %s\n", + dep->name); + status = -ECONNRESET; + } + } else { + if (count && (event->status & DEPEVT_STATUS_SHORT)) + s_pkt = 1; + } + + /* + * We assume here we will always receive the entire data block + * which we should receive. Meaning, if we program RX to + * receive 4K but we receive only 2K, we assume that's all we + * should receive and we simply bounce the request back to the + * gadget driver for further processing. + */ + req->request.actual += req->request.length - count; + dwc3_gadget_giveback(dep, req, status); + if (s_pkt) + break; + if ((event->status & DEPEVT_STATUS_LST) && trb.lst) + break; + if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc) + break; + } while (1); + + if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc) + return 0; + return 1; +} + +static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, + struct dwc3_ep *dep, const struct dwc3_event_depevt *event, + int start_new) +{ + unsigned status = 0; + int clean_busy; + + if (event->status & DEPEVT_STATUS_BUSERR) + status = -ECONNRESET; + + clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); + if (clean_busy) { + dep->flags &= ~DWC3_EP_BUSY; + dep->res_trans_idx = 0; + } +} + +static void dwc3_gadget_start_isoc(struct dwc3 *dwc, + struct dwc3_ep *dep, const struct dwc3_event_depevt *event) +{ + u32 uf; + + if (list_empty(&dep->request_list)) { + dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", + dep->name); + return; + } + + if (event->parameters) { + u32 mask; + + mask = ~(dep->interval - 1); + uf = event->parameters & mask; + /* 4 micro frames in the future */ + uf += dep->interval * 4; + } else { + uf = 0; + } + + __dwc3_gadget_kick_transfer(dep, uf, 1); +} + +static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + struct dwc3 *dwc = dep->dwc; + struct dwc3_event_depevt mod_ev = *event; + + /* + * We were asked to remove one requests. It is possible that this + * request and a few other were started together and have the same + * transfer index. Since we stopped the complete endpoint we don't + * know how many requests were already completed (and not yet) + * reported and how could be done (later). We purge them all until + * the end of the list. + */ + mod_ev.status = DEPEVT_STATUS_LST; + dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN); + dep->flags &= ~DWC3_EP_BUSY; + /* pending requets are ignored and are queued on XferNotReady */ +} + +static void dwc3_ep_cmd_compl(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + u32 param = event->parameters; + u32 cmd_type = (param >> 8) & ((1 << 5) - 1); + + switch (cmd_type) { + case DWC3_DEPCMD_ENDTRANSFER: + dwc3_process_ep_cmd_complete(dep, event); + break; + case DWC3_DEPCMD_STARTTRANSFER: + dep->res_trans_idx = param & 0x7f; + break; + default: + printk(KERN_ERR "%s() unknown /unexpected type: %d\n", + __func__, cmd_type); + break; + }; +} + +static void dwc3_endpoint_interrupt(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep; + u8 epnum = event->endpoint_number; + + dep = dwc->eps[epnum]; + + dev_vdbg(dwc->dev, "%s: %s\n", dep->name, + dwc3_ep_event_string(event->endpoint_event)); + + if (epnum == 0 || epnum == 1) { + dwc3_ep0_interrupt(dwc, event); + return; + } + + switch (event->endpoint_event) { + case DWC3_DEPEVT_XFERCOMPLETE: + if (usb_endpoint_xfer_isoc(dep->desc)) { + dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n", + dep->name); + return; + } + + dwc3_endpoint_transfer_complete(dwc, dep, event, 1); + break; + case DWC3_DEPEVT_XFERINPROGRESS: + if (!usb_endpoint_xfer_isoc(dep->desc)) { + dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n", + dep->name); + return; + } + + dwc3_endpoint_transfer_complete(dwc, dep, event, 0); + break; + case DWC3_DEPEVT_XFERNOTREADY: + if (usb_endpoint_xfer_isoc(dep->desc)) { + dwc3_gadget_start_isoc(dwc, dep, event); + } else { + int ret; + + dev_vdbg(dwc->dev, "%s: reason %s\n", + dep->name, event->status + ? "Transfer Active" + : "Transfer Not Active"); + + ret = __dwc3_gadget_kick_transfer(dep, 0, 1); + if (!ret || ret == -EBUSY) + return; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + + break; + case DWC3_DEPEVT_STREAMEVT: + if (!usb_endpoint_xfer_bulk(dep->desc)) { + dev_err(dwc->dev, "Stream event for non-Bulk %s\n", + dep->name); + return; + } + + switch (event->status) { + case DEPEVT_STREAMEVT_FOUND: + dev_vdbg(dwc->dev, "Stream %d found and started\n", + event->parameters); + + break; + case DEPEVT_STREAMEVT_NOTFOUND: + /* FALLTHROUGH */ + default: + dev_dbg(dwc->dev, "Couldn't find suitable stream\n"); + } + break; + case DWC3_DEPEVT_RXTXFIFOEVT: + dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name); + break; + case DWC3_DEPEVT_EPCMDCMPLT: + dwc3_ep_cmd_compl(dep, event); + break; + } +} + +static void dwc3_disconnect_gadget(struct dwc3 *dwc) +{ + if (dwc->gadget_driver && dwc->gadget_driver->disconnect) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->disconnect(&dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) +{ + struct dwc3_ep *dep; + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + int ret; + + dep = dwc->eps[epnum]; + + WARN_ON(!dep->res_trans_idx); + if (dep->res_trans_idx) { + cmd = DWC3_DEPCMD_ENDTRANSFER; + cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; + cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx); + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + WARN_ON_ONCE(ret); + dep->res_trans_idx = 0; + } +} + +static void dwc3_stop_active_transfers(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + struct dwc3_ep *dep; + + dep = dwc->eps[epnum]; + if (!(dep->flags & DWC3_EP_ENABLED)) + continue; + + dwc3_remove_requests(dwc, dep); + } +} + +static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + struct dwc3_ep *dep; + struct dwc3_gadget_ep_cmd_params params; + int ret; + + dep = dwc->eps[epnum]; + + if (!(dep->flags & DWC3_EP_STALL)) + continue; + + dep->flags &= ~DWC3_EP_STALL; + + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_CLEARSTALL, ¶ms); + WARN_ON_ONCE(ret); + } +} + +static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) +{ + dev_vdbg(dwc->dev, "%s\n", __func__); +#if 0 + XXX + U1/U2 is powersave optimization. Skip it for now. Anyway we need to + enable it before we can disable it. + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_INITU1ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + reg &= ~DWC3_DCTL_INITU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); +#endif + + dwc3_stop_active_transfers(dwc); + dwc3_disconnect_gadget(dwc); + dwc->start_config_issued = false; + + dwc->gadget.speed = USB_SPEED_UNKNOWN; +} + +static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + + if (on) + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + else + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); +} + +static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + + if (on) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + else + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + +static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) +{ + u32 reg; + + dev_vdbg(dwc->dev, "%s\n", __func__); + + /* Enable PHYs */ + dwc3_gadget_usb2_phy_power(dwc, true); + dwc3_gadget_usb3_phy_power(dwc, true); + + if (dwc->gadget.speed != USB_SPEED_UNKNOWN) + dwc3_disconnect_gadget(dwc); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_TSTCTRL_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + dwc3_stop_active_transfers(dwc); + dwc3_clear_stall_all_ep(dwc); + dwc->start_config_issued = false; + + /* Reset device address to zero */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_DEVADDR_MASK); + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + +static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed) +{ + u32 reg; + u32 usb30_clock = DWC3_GCTL_CLK_BUS; + + /* + * We change the clock only at SS but I dunno why I would want to do + * this. Maybe it becomes part of the power saving plan. + */ + + if (speed != DWC3_DSTS_SUPERSPEED) + return; + + /* + * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed + * each time on Connect Done. + */ + if (!usb30_clock) + return; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock); + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + +static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed) +{ + switch (speed) { + case USB_SPEED_SUPER: + dwc3_gadget_usb2_phy_power(dwc, false); + break; + case USB_SPEED_HIGH: + case USB_SPEED_FULL: + case USB_SPEED_LOW: + dwc3_gadget_usb3_phy_power(dwc, false); + break; + } +} + +static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_ep *dep; + int ret; + u32 reg; + u8 speed; + + dev_vdbg(dwc->dev, "%s\n", __func__); + + memset(¶ms, 0x00, sizeof(params)); + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + speed = reg & DWC3_DSTS_CONNECTSPD; + dwc->speed = speed; + + dwc3_update_ram_clk_sel(dwc, speed); + + switch (speed) { + case DWC3_DCFG_SUPERSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + dwc->gadget.ep0->maxpacket = 512; + dwc->gadget.speed = USB_SPEED_SUPER; + break; + case DWC3_DCFG_HIGHSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget.ep0->maxpacket = 64; + dwc->gadget.speed = USB_SPEED_HIGH; + break; + case DWC3_DCFG_FULLSPEED2: + case DWC3_DCFG_FULLSPEED1: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget.ep0->maxpacket = 64; + dwc->gadget.speed = USB_SPEED_FULL; + break; + case DWC3_DCFG_LOWSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); + dwc->gadget.ep0->maxpacket = 8; + dwc->gadget.speed = USB_SPEED_LOW; + break; + } + + /* Disable unneded PHY */ + dwc3_gadget_disable_phy(dwc, dwc->gadget.speed); + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + /* + * Configure PHY via GUSB3PIPECTLn if required. + * + * Update GTXFIFOSIZn + * + * In both cases reset values should be sufficient. + */ +} + +static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) +{ + dev_vdbg(dwc->dev, "%s\n", __func__); + + /* + * TODO take core out of low power mode when that's + * implemented. + */ + + dwc->gadget_driver->resume(&dwc->gadget); +} + +static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, + unsigned int evtinfo) +{ + /* The fith bit says SuperSpeed yes or no. */ + dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK; + + dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state); +} + +static void dwc3_gadget_interrupt(struct dwc3 *dwc, + const struct dwc3_event_devt *event) +{ + switch (event->type) { + case DWC3_DEVICE_EVENT_DISCONNECT: + dwc3_gadget_disconnect_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_RESET: + dwc3_gadget_reset_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_CONNECT_DONE: + dwc3_gadget_conndone_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_WAKEUP: + dwc3_gadget_wakeup_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: + dwc3_gadget_linksts_change_interrupt(dwc, event->event_info); + break; + case DWC3_DEVICE_EVENT_EOPF: + dev_vdbg(dwc->dev, "End of Periodic Frame\n"); + break; + case DWC3_DEVICE_EVENT_SOF: + dev_vdbg(dwc->dev, "Start of Periodic Frame\n"); + break; + case DWC3_DEVICE_EVENT_ERRATIC_ERROR: + dev_vdbg(dwc->dev, "Erratic Error\n"); + break; + case DWC3_DEVICE_EVENT_CMD_CMPL: + dev_vdbg(dwc->dev, "Command Complete\n"); + break; + case DWC3_DEVICE_EVENT_OVERFLOW: + dev_vdbg(dwc->dev, "Overflow\n"); + break; + default: + dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type); + } +} + +static void dwc3_process_event_entry(struct dwc3 *dwc, + const union dwc3_event *event) +{ + /* Endpoint IRQ, handle it and return early */ + if (event->type.is_devspec == 0) { + /* depevt */ + return dwc3_endpoint_interrupt(dwc, &event->depevt); + } + + switch (event->type.type) { + case DWC3_EVENT_TYPE_DEV: + dwc3_gadget_interrupt(dwc, &event->devt); + break; + /* REVISIT what to do with Carkit and I2C events ? */ + default: + dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw); + } +} + +static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf) +{ + struct dwc3_event_buffer *evt; + int left; + u32 count; + + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf)); + count &= DWC3_GEVNTCOUNT_MASK; + if (!count) + return IRQ_NONE; + + evt = dwc->ev_buffs[buf]; + left = count; + + while (left > 0) { + union dwc3_event event; + + memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw)); + dwc3_process_event_entry(dwc, &event); + /* + * XXX we wrap around correctly to the next entry as almost all + * entries are 4 bytes in size. There is one entry which has 12 + * bytes which is a regular entry followed by 8 bytes data. ATM + * I don't know how things are organized if were get next to the + * a boundary so I worry about that once we try to handle that. + */ + evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE; + left -= 4; + + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4); + } + + return IRQ_HANDLED; +} + +static irqreturn_t dwc3_interrupt(int irq, void *_dwc) +{ + struct dwc3 *dwc = _dwc; + int i; + irqreturn_t ret = IRQ_NONE; + + spin_lock(&dwc->lock); + + for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) { + irqreturn_t status; + + status = dwc3_process_event_buf(dwc, i); + if (status == IRQ_HANDLED) + ret = status; + } + + spin_unlock(&dwc->lock); + + return ret; +} + +/** + * dwc3_gadget_init - Initializes gadget related registers + * @dwc: Pointer to out controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +int __devinit dwc3_gadget_init(struct dwc3 *dwc) +{ + u32 reg; + int ret; + int irq; + + dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + &dwc->ctrl_req_addr, GFP_KERNEL); + if (!dwc->ctrl_req) { + dev_err(dwc->dev, "failed to allocate ctrl request\n"); + ret = -ENOMEM; + goto err0; + } + + dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + &dwc->ep0_trb_addr, GFP_KERNEL); + if (!dwc->ep0_trb) { + dev_err(dwc->dev, "failed to allocate ep0 trb\n"); + ret = -ENOMEM; + goto err1; + } + + dwc->setup_buf = dma_alloc_coherent(dwc->dev, + sizeof(*dwc->setup_buf) * 2, + &dwc->setup_buf_addr, GFP_KERNEL); + if (!dwc->setup_buf) { + dev_err(dwc->dev, "failed to allocate setup buffer\n"); + ret = -ENOMEM; + goto err2; + } + + dwc->ep0_bounce = dma_alloc_coherent(dwc->dev, + 512, &dwc->ep0_bounce_addr, GFP_KERNEL); + if (!dwc->ep0_bounce) { + dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n"); + ret = -ENOMEM; + goto err3; + } + + dev_set_name(&dwc->gadget.dev, "gadget"); + + dwc->gadget.ops = &dwc3_gadget_ops; + dwc->gadget.is_dualspeed = true; + dwc->gadget.speed = USB_SPEED_UNKNOWN; + dwc->gadget.dev.parent = dwc->dev; + + dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask); + + dwc->gadget.dev.dma_parms = dwc->dev->dma_parms; + dwc->gadget.dev.dma_mask = dwc->dev->dma_mask; + dwc->gadget.dev.release = dwc3_gadget_release; + dwc->gadget.name = "dwc3-gadget"; + + /* + * REVISIT: Here we should clear all pending IRQs to be + * sure we're starting from a well known location. + */ + + ret = dwc3_gadget_init_endpoints(dwc); + if (ret) + goto err4; + + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + + ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED, + "dwc3", dwc); + if (ret) { + dev_err(dwc->dev, "failed to request irq #%d --> %d\n", + irq, ret); + goto err5; + } + + /* Enable all but Start and End of Frame IRQs */ + reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | + DWC3_DEVTEN_EVNTOVERFLOWEN | + DWC3_DEVTEN_CMDCMPLTEN | + DWC3_DEVTEN_ERRTICERREN | + DWC3_DEVTEN_WKUPEVTEN | + DWC3_DEVTEN_ULSTCNGEN | + DWC3_DEVTEN_CONNECTDONEEN | + DWC3_DEVTEN_USBRSTEN | + DWC3_DEVTEN_DISCONNEVTEN); + dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); + + ret = device_register(&dwc->gadget.dev); + if (ret) { + dev_err(dwc->dev, "failed to register gadget device\n"); + put_device(&dwc->gadget.dev); + goto err6; + } + + ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); + if (ret) { + dev_err(dwc->dev, "failed to register udc\n"); + goto err7; + } + + return 0; + +err7: + device_unregister(&dwc->gadget.dev); + +err6: + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); + free_irq(irq, dwc); + +err5: + dwc3_gadget_free_endpoints(dwc); + +err4: + dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, + dwc->ep0_bounce_addr); + +err3: + dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2, + dwc->setup_buf, dwc->setup_buf_addr); + +err2: + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dwc->ep0_trb, dwc->ep0_trb_addr); + +err1: + dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + dwc->ctrl_req, dwc->ctrl_req_addr); + +err0: + return ret; +} + +void dwc3_gadget_exit(struct dwc3 *dwc) +{ + int irq; + int i; + + usb_del_gadget_udc(&dwc->gadget); + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); + free_irq(irq, dwc); + + for (i = 0; i < ARRAY_SIZE(dwc->eps); i++) + __dwc3_gadget_ep_disable(dwc->eps[i]); + + dwc3_gadget_free_endpoints(dwc); + + dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, + dwc->ep0_bounce_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2, + dwc->setup_buf, dwc->setup_buf_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dwc->ep0_trb, dwc->ep0_trb_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + dwc->ctrl_req, dwc->ctrl_req_addr); + + device_unregister(&dwc->gadget.dev); +} |