diff options
Diffstat (limited to 'drivers/usb/gadget')
66 files changed, 8886 insertions, 9397 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 2633f7595116..bddc8fd9a7be 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -123,13 +123,7 @@ config USB_GADGET_STORAGE_NUM_BUFFERS # - discrete ones (including all PCI-only controllers) # - debug/dummy gadget+hcd is last. # -choice - prompt "USB Peripheral Controller" - help - A USB device uses a controller to talk to its host. - Systems should have only one such upstream link. - Many controller drivers are platform-specific; these - often need board-specific hooks. +menu "USB Peripheral Controller" # # Integrated controllers @@ -147,6 +141,17 @@ config USB_AT91 dynamically linked module called "at91_udc" and force all gadget drivers to also be dynamically linked. +config USB_LPC32XX + tristate "LPC32XX USB Peripheral Controller" + depends on ARCH_LPC32XX + select USB_ISP1301 + help + This option selects the USB device controller in the LPC32xx SoC. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "lpc32xx_udc" and force all + gadget drivers to also be dynamically linked. + config USB_ATMEL_USBA tristate "Atmel USBA" select USB_GADGET_DUALSPEED @@ -161,7 +166,7 @@ config USB_FSL_USB2 select USB_GADGET_DUALSPEED select USB_FSL_MPH_DR_OF if OF help - Some of Freescale PowerPC processors have a High Speed + Some of Freescale PowerPC and i.MX processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. The number of programmable endpoints is different through @@ -373,18 +378,6 @@ config USB_FSL_QE Set CONFIG_USB_GADGET to "m" to build this driver as a dynamically linked module called "fsl_qe_udc". -config USB_CI13XXX_PCI - tristate "MIPS USB CI13xxx PCI UDC" - depends on PCI - select USB_GADGET_DUALSPEED - help - MIPS USB IP core family device controller - Currently it only supports IP part number CI13412 - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "ci13xxx_udc" and force all - gadget drivers to also be dynamically linked. - config USB_NET2272 tristate "PLX NET2272" select USB_GADGET_DUALSPEED @@ -438,22 +431,6 @@ config USB_GOKU dynamically linked module called "goku_udc" and to force all gadget drivers to also be dynamically linked. -config USB_LANGWELL - tristate "Intel Langwell USB Device Controller" - depends on PCI - depends on !PHYS_ADDR_T_64BIT - select USB_GADGET_DUALSPEED - help - Intel Langwell USB Device Controller is a High-Speed USB - On-The-Go device controller. - - The number of programmable endpoints is different through - controller revision. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "langwell_udc" and force all - gadget drivers to also be dynamically linked. - config USB_EG20T tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" depends on PCI @@ -477,23 +454,6 @@ config USB_EG20T ML7213/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7831 is completely compatible for Intel EG20T PCH. -config USB_CI13XXX_MSM - tristate "MIPS USB CI13xxx for MSM" - depends on ARCH_MSM - select USB_GADGET_DUALSPEED - select USB_MSM_OTG - help - MSM SoC has chipidea USB controller. This driver uses - ci13xxx_udc core. - This driver depends on OTG driver for PHY initialization, - clock management, powering up VBUS, and power management. - This driver is not supported on boards like trout which - has an external PHY. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "ci13xxx_msm" and force all - gadget drivers to also be dynamically linked. - # # LAST -- dummy/emulated controller # @@ -525,7 +485,7 @@ config USB_DUMMY_HCD # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears # first and will be selected by default. -endchoice +endmenu # Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED @@ -798,6 +758,16 @@ config USB_MASS_STORAGE Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_mass_storage". +config USB_GADGET_TARGET + tristate "USB Gadget Target Fabric Module" + depends on TARGET_CORE + help + This fabric is an USB gadget. Two USB protocols are supported that is + BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is + advertised on alternative interface 0 (primary) and UAS is on + alternative interface 1. Both protocols can work on USB2.0 and USB3.0. + UAS utilizes the USB 3.0 feature called streams support. + config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" help diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index b7f6eefc3927..1811513f1c27 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -22,14 +22,12 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o -obj-$(CONFIG_USB_CI13XXX_PCI) += ci13xxx_pci.o obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o -obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o +obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_MV_UDC) += mv_udc.o mv_udc-y := mv_udc_core.o -obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o # @@ -52,6 +50,7 @@ g_nokia-y := nokia.o g_webcam-y := webcam.o g_ncm-y := ncm.o g_acm_ms-y := acm_ms.o +g_tcm_usb_gadget-y := tcm_usb_gadget.o obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_AUDIO) += g_audio.o @@ -71,3 +70,4 @@ obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o +obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 77779271f487..187d21181cd5 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -333,7 +333,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc) return -ESHUTDOWN; spin_lock_irqsave(&dev->lock, iflags); - ep->desc = desc; + ep->ep.desc = desc; ep->halted = 0; @@ -442,7 +442,6 @@ static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep) u32 tmp; VDBG(ep->dev, "ep-%d reset\n", ep->num); - ep->desc = NULL; ep->ep.desc = NULL; ep->ep.ops = &udc_ep_ops; INIT_LIST_HEAD(&ep->queue); @@ -489,7 +488,7 @@ static int udc_ep_disable(struct usb_ep *usbep) return -EINVAL; ep = container_of(usbep, struct udc_ep, ep); - if (usbep->name == ep0_string || !ep->desc) + if (usbep->name == ep0_string || !ep->ep.desc) return -EINVAL; DBG(ep->dev, "Disable ep-%d\n", ep->num); @@ -1066,7 +1065,7 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp) return -EINVAL; ep = container_of(usbep, struct udc_ep, ep); - if (!ep->desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) + if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) return -EINVAL; VDBG(ep->dev, "udc_queue(): ep%d-in=%d\n", ep->num, ep->in); @@ -1257,7 +1256,7 @@ static int udc_dequeue(struct usb_ep *usbep, struct usb_request *usbreq) unsigned long iflags; ep = container_of(usbep, struct udc_ep, ep); - if (!usbep || !usbreq || (!ep->desc && (ep->num != 0 + if (!usbep || !usbreq || (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))) return -EINVAL; @@ -1317,7 +1316,7 @@ udc_set_halt(struct usb_ep *usbep, int halt) pr_debug("set_halt %s: halt=%d\n", usbep->name, halt); ep = container_of(usbep, struct udc_ep, ep); - if (!ep->desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) + if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) return -EINVAL; if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; @@ -1539,7 +1538,7 @@ static void udc_setup_endpoints(struct udc *dev) * disabling ep interrupts when ENUM interrupt occurs but ep is * not enabled by gadget driver */ - if (!ep->desc) + if (!ep->ep.desc) ep_init(dev->regs, ep); if (use_dma) { @@ -3402,19 +3401,7 @@ static struct pci_driver udc_pci_driver = { .remove = udc_pci_remove, }; -/* Inits driver */ -static int __init init(void) -{ - return pci_register_driver(&udc_pci_driver); -} -module_init(init); - -/* Cleans driver */ -static void __exit cleanup(void) -{ - pci_unregister_driver(&udc_pci_driver); -} -module_exit(cleanup); +module_pci_driver(udc_pci_driver); MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); MODULE_AUTHOR("Thomas Dahlmann"); diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index f87e29c65325..14af87d65caa 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -512,7 +512,6 @@ struct udc_ep { /* queue for requests */ struct list_head queue; - const struct usb_endpoint_descriptor *desc; unsigned halted; unsigned cancel_transfer; unsigned num : 5, diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 9d7bcd910074..1a4430f315c3 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -212,7 +212,7 @@ static int proc_udc_show(struct seq_file *s, void *unused) if (udc->enabled && udc->vbus) { proc_ep_show(s, &udc->ep[0]); list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) + if (ep->ep.desc) proc_ep_show(s, ep); } } @@ -475,7 +475,7 @@ static int at91_ep_enable(struct usb_ep *_ep, unsigned long flags; if (!_ep || !ep - || !desc || ep->desc + || !desc || ep->ep.desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || (maxpacket = usb_endpoint_maxp(desc)) == 0 @@ -530,7 +530,7 @@ ok: tmp |= AT91_UDP_EPEDS; __raw_writel(tmp, ep->creg); - ep->desc = desc; + ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; /* @@ -558,7 +558,6 @@ static int at91_ep_disable (struct usb_ep * _ep) nuke(ep, -ESHUTDOWN); /* restore the endpoint's pristine config */ - ep->desc = NULL; ep->ep.desc = NULL; ep->ep.maxpacket = ep->maxpacket; @@ -618,7 +617,7 @@ static int at91_ep_queue(struct usb_ep *_ep, return -EINVAL; } - if (!_ep || (!ep->desc && ep->ep.name != ep0name)) { + if (!_ep || (!ep->ep.desc && ep->ep.name != ep0name)) { DBG("invalid ep\n"); return -EINVAL; } @@ -833,7 +832,7 @@ static void udc_reinit(struct at91_udc *udc) if (i != 0) list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); - ep->desc = NULL; + ep->ep.desc = NULL; ep->stopped = 0; ep->fifo_bank = 0; ep->ep.maxpacket = ep->maxpacket; @@ -978,18 +977,18 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on) return 0; } -static int at91_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int at91_stop(struct usb_gadget_driver *driver); - +static int at91_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int at91_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops at91_udc_ops = { .get_frame = at91_get_frame, .wakeup = at91_wakeup, .set_selfpowered = at91_set_selfpowered, .vbus_session = at91_vbus_session, .pullup = at91_pullup, - .start = at91_start, - .stop = at91_stop, + .udc_start = at91_start, + .udc_stop = at91_stop, /* * VBUS-powered devices may also also want to support bigger @@ -1172,7 +1171,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) | USB_REQ_GET_STATUS: tmp = w_index & USB_ENDPOINT_NUMBER_MASK; ep = &udc->ep[tmp]; - if (tmp >= NUM_ENDPOINTS || (tmp && !ep->desc)) + if (tmp >= NUM_ENDPOINTS || (tmp && !ep->ep.desc)) goto stall; if (tmp) { @@ -1197,7 +1196,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) ep = &udc->ep[tmp]; if (w_value != USB_ENDPOINT_HALT || tmp >= NUM_ENDPOINTS) goto stall; - if (!ep->desc || ep->is_iso) + if (!ep->ep.desc || ep->is_iso) goto stall; if ((w_index & USB_DIR_IN)) { if (!ep->is_in) @@ -1218,7 +1217,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) goto stall; if (tmp == 0) goto succeed; - if (!ep->desc || ep->is_iso) + if (!ep->ep.desc || ep->is_iso) goto stall; if ((w_index & USB_DIR_IN)) { if (!ep->is_in) @@ -1627,66 +1626,34 @@ static void at91_vbus_timer(unsigned long data) schedule_work(&udc->vbus_timer_work); } -static int at91_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int at91_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct at91_udc *udc = &controller; - int retval; - unsigned long flags; - - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !bind - || !driver->setup) { - DBG("bad parameter.\n"); - return -EINVAL; - } - - if (udc->driver) { - DBG("UDC already has a gadget driver\n"); - return -EBUSY; - } + struct at91_udc *udc; + udc = container_of(gadget, struct at91_udc, gadget); udc->driver = driver; udc->gadget.dev.driver = &driver->driver; dev_set_drvdata(&udc->gadget.dev, &driver->driver); udc->enabled = 1; udc->selfpowered = 1; - retval = bind(&udc->gadget); - if (retval) { - DBG("bind() returned %d\n", retval); - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - dev_set_drvdata(&udc->gadget.dev, NULL); - udc->enabled = 0; - udc->selfpowered = 0; - return retval; - } - - spin_lock_irqsave(&udc->lock, flags); - pullup(udc, 1); - spin_unlock_irqrestore(&udc->lock, flags); - DBG("bound to %s\n", driver->driver.name); return 0; } -static int at91_stop(struct usb_gadget_driver *driver) +static int at91_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct at91_udc *udc = &controller; + struct at91_udc *udc; unsigned long flags; - if (!driver || driver != udc->driver || !driver->unbind) - return -EINVAL; - + udc = container_of(gadget, struct at91_udc, gadget); spin_lock_irqsave(&udc->lock, flags); udc->enabled = 0; at91_udp_write(udc, AT91_UDP_IDR, ~0); - pullup(udc, 0); spin_unlock_irqrestore(&udc->lock, flags); - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; dev_set_drvdata(&udc->gadget.dev, NULL); udc->driver = NULL; diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 3c0315b86ace..e647d1c2ada4 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -105,9 +105,6 @@ struct at91_ep { unsigned is_in:1; unsigned is_iso:1; unsigned fifo_bank:1; - - const struct usb_endpoint_descriptor - *desc; }; /* diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9f98508966d1..9a9bced813ed 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -599,13 +599,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) spin_lock_irqsave(&ep->udc->lock, flags); - if (ep->desc) { - spin_unlock_irqrestore(&ep->udc->lock, flags); - DBG(DBG_ERR, "ep%d already enabled\n", ep->index); - return -EBUSY; - } - - ep->desc = desc; + ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; usba_ep_writel(ep, CFG, ept_cfg); @@ -647,7 +641,7 @@ static int usba_ep_disable(struct usb_ep *_ep) spin_lock_irqsave(&udc->lock, flags); - if (!ep->desc) { + if (!ep->ep.desc) { spin_unlock_irqrestore(&udc->lock, flags); /* REVISIT because this driver disables endpoints in * reset_all_endpoints() before calling disconnect(), @@ -658,7 +652,6 @@ static int usba_ep_disable(struct usb_ep *_ep) ep->ep.name); return -EINVAL; } - ep->desc = NULL; ep->ep.desc = NULL; list_splice_init(&ep->queue, &req_list); @@ -752,7 +745,7 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, */ ret = -ESHUTDOWN; spin_lock_irqsave(&udc->lock, flags); - if (ep->desc) { + if (ep->ep.desc) { if (list_empty(&ep->queue)) submit_request(ep, req); @@ -776,7 +769,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n", ep->ep.name, req, _req->length); - if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc) + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || + !ep->ep.desc) return -ESHUTDOWN; req->submitted = 0; @@ -792,7 +786,7 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* May have received a reset since last time we checked */ ret = -ESHUTDOWN; spin_lock_irqsave(&udc->lock, flags); - if (ep->desc) { + if (ep->ep.desc) { list_add_tail(&req->queue, &ep->queue); if ((!ep_is_control(ep) && ep->is_in) || @@ -905,7 +899,7 @@ static int usba_ep_set_halt(struct usb_ep *_ep, int value) DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name, value ? "set" : "clear"); - if (!ep->desc) { + if (!ep->ep.desc) { DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n", ep->ep.name); return -ENODEV; @@ -1008,16 +1002,16 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) return 0; } -static int atmel_usba_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int atmel_usba_stop(struct usb_gadget_driver *driver); - +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int atmel_usba_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops usba_udc_ops = { .get_frame = usba_udc_get_frame, .wakeup = usba_udc_wakeup, .set_selfpowered = usba_udc_set_selfpowered, - .start = atmel_usba_start, - .stop = atmel_usba_stop, + .udc_start = atmel_usba_start, + .udc_stop = atmel_usba_stop, }; static struct usb_endpoint_descriptor usba_ep0_desc = { @@ -1071,7 +1065,7 @@ static void reset_all_endpoints(struct usba_udc *udc) * FIXME remove this code ... and retest thoroughly. */ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) { + if (ep->ep.desc) { spin_unlock(&udc->lock); usba_ep_disable(&ep->ep); spin_lock(&udc->lock); @@ -1089,9 +1083,9 @@ static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { u8 bEndpointAddress; - if (!ep->desc) + if (!ep->ep.desc) continue; - bEndpointAddress = ep->desc->bEndpointAddress; + bEndpointAddress = ep->ep.desc->bEndpointAddress; if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) continue; if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) @@ -1727,7 +1721,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) usb_speed_string(udc->gadget.speed)); ep0 = &usba_ep[0]; - ep0->desc = &usba_ep0_desc; + ep0->ep.desc = &usba_ep0_desc; ep0->state = WAIT_FOR_SETUP; usba_ep_writel(ep0, CFG, (USBA_BF(EPT_SIZE, EP0_EPT_SIZE) @@ -1795,21 +1789,13 @@ out: return IRQ_HANDLED; } -static int atmel_usba_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct usba_udc *udc = &the_udc; + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); unsigned long flags; - int ret; - - if (!udc->pdev) - return -ENODEV; spin_lock_irqsave(&udc->lock, flags); - if (udc->driver) { - spin_unlock_irqrestore(&udc->lock, flags); - return -EBUSY; - } udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; udc->driver = driver; @@ -1819,13 +1805,6 @@ static int atmel_usba_start(struct usb_gadget_driver *driver, clk_enable(udc->pclk); clk_enable(udc->hclk); - ret = bind(&udc->gadget); - if (ret) { - DBG(DBG_ERR, "Could not bind to driver %s: error %d\n", - driver->driver.name, ret); - goto err_driver_bind; - } - DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name); udc->vbus_prev = 0; @@ -1842,23 +1821,14 @@ static int atmel_usba_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&udc->lock, flags); return 0; - -err_driver_bind: - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - return ret; } -static int atmel_usba_stop(struct usb_gadget_driver *driver) +static int atmel_usba_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct usba_udc *udc = &the_udc; + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); unsigned long flags; - if (!udc->pdev) - return -ENODEV; - if (driver != udc->driver || !driver->unbind) - return -EINVAL; - if (gpio_is_valid(udc->vbus_pin)) disable_irq(gpio_to_irq(udc->vbus_pin)); @@ -1871,10 +1841,6 @@ static int atmel_usba_stop(struct usb_gadget_driver *driver) toggle_bias(0); usba_writel(udc, CTRL, USBA_DISABLE_MASK); - if (udc->driver->disconnect) - udc->driver->disconnect(&udc->gadget); - - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; udc->driver = NULL; diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index 88a2e07a11a8..9791259cbda7 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -280,7 +280,6 @@ struct usba_ep { struct usba_udc *udc; struct list_head queue; - const struct usb_endpoint_descriptor *desc; u16 fifo_size; u8 nr_banks; diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c deleted file mode 100644 index d07e44c05e9b..000000000000 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ /dev/null @@ -1,126 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/usb/msm_hsusb_hw.h> -#include <linux/usb/ulpi.h> - -#include "ci13xxx_udc.c" - -#define MSM_USB_BASE (udc->regs) - -static irqreturn_t msm_udc_irq(int irq, void *data) -{ - return udc_irq(); -} - -static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event) -{ - struct device *dev = udc->gadget.dev.parent; - int val; - - switch (event) { - case CI13XXX_CONTROLLER_RESET_EVENT: - dev_dbg(dev, "CI13XXX_CONTROLLER_RESET_EVENT received\n"); - writel(0, USB_AHBBURST); - writel(0, USB_AHBMODE); - break; - case CI13XXX_CONTROLLER_STOPPED_EVENT: - dev_dbg(dev, "CI13XXX_CONTROLLER_STOPPED_EVENT received\n"); - /* - * Put the transceiver in non-driving mode. Otherwise host - * may not detect soft-disconnection. - */ - val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL); - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; - val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL); - break; - default: - dev_dbg(dev, "unknown ci13xxx_udc event\n"); - break; - } -} - -static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = { - .name = "ci13xxx_msm", - .flags = CI13XXX_REGS_SHARED | - CI13XXX_REQUIRE_TRANSCEIVER | - CI13XXX_PULLUP_ON_VBUS | - CI13XXX_DISABLE_STREAMING, - - .notify_event = ci13xxx_msm_notify_event, -}; - -static int ci13xxx_msm_probe(struct platform_device *pdev) -{ - struct resource *res; - void __iomem *regs; - int irq; - int ret; - - dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n"); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get platform resource mem\n"); - return -ENXIO; - } - - regs = ioremap(res->start, resource_size(res)); - if (!regs) { - dev_err(&pdev->dev, "ioremap failed\n"); - return -ENOMEM; - } - - ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs); - if (ret < 0) { - dev_err(&pdev->dev, "udc_probe failed\n"); - goto iounmap; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "IRQ not found\n"); - ret = -ENXIO; - goto udc_remove; - } - - ret = request_irq(irq, msm_udc_irq, IRQF_SHARED, pdev->name, pdev); - if (ret < 0) { - dev_err(&pdev->dev, "request_irq failed\n"); - goto udc_remove; - } - - pm_runtime_no_callbacks(&pdev->dev); - pm_runtime_enable(&pdev->dev); - - return 0; - -udc_remove: - udc_remove(); -iounmap: - iounmap(regs); - - return ret; -} - -static struct platform_driver ci13xxx_msm_driver = { - .probe = ci13xxx_msm_probe, - .driver = { .name = "msm_hsusb", }, -}; -MODULE_ALIAS("platform:msm_hsusb"); - -static int __init ci13xxx_msm_init(void) -{ - return platform_driver_register(&ci13xxx_msm_driver); -} -module_init(ci13xxx_msm_init); - -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/gadget/ci13xxx_pci.c deleted file mode 100644 index 883ab5e832d1..000000000000 --- a/drivers/usb/gadget/ci13xxx_pci.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * ci13xxx_pci.c - MIPS USB IP core family device controller - * - * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. - * - * Author: David Lopo - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/pci.h> - -#include "ci13xxx_udc.c" - -/* driver name */ -#define UDC_DRIVER_NAME "ci13xxx_pci" - -/****************************************************************************** - * PCI block - *****************************************************************************/ -/** - * ci13xxx_pci_irq: interrut handler - * @irq: irq number - * @pdev: USB Device Controller interrupt source - * - * This function returns IRQ_HANDLED if the IRQ has been handled - * This is an ISR don't trace, use attribute interface instead - */ -static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev) -{ - if (irq == 0) { - dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!"); - return IRQ_HANDLED; - } - return udc_irq(); -} - -static struct ci13xxx_udc_driver ci13xxx_pci_udc_driver = { - .name = UDC_DRIVER_NAME, -}; - -/** - * ci13xxx_pci_probe: PCI probe - * @pdev: USB device controller being probed - * @id: PCI hotplug ID connecting controller to UDC framework - * - * This function returns an error code - * Allocates basic PCI resources for this USB device controller, and then - * invokes the udc_probe() method to start the UDC associated with it - */ -static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - void __iomem *regs = NULL; - int retval = 0; - - if (id == NULL) - return -EINVAL; - - retval = pci_enable_device(pdev); - if (retval) - goto done; - - if (!pdev->irq) { - dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!"); - retval = -ENODEV; - goto disable_device; - } - - retval = pci_request_regions(pdev, UDC_DRIVER_NAME); - if (retval) - goto disable_device; - - /* BAR 0 holds all the registers */ - regs = pci_iomap(pdev, 0, 0); - if (!regs) { - dev_err(&pdev->dev, "Error mapping memory!"); - retval = -EFAULT; - goto release_regions; - } - pci_set_drvdata(pdev, (__force void *)regs); - - pci_set_master(pdev); - pci_try_set_mwi(pdev); - - retval = udc_probe(&ci13xxx_pci_udc_driver, &pdev->dev, regs); - if (retval) - goto iounmap; - - /* our device does not have MSI capability */ - - retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED, - UDC_DRIVER_NAME, pdev); - if (retval) - goto gadget_remove; - - return 0; - - gadget_remove: - udc_remove(); - iounmap: - pci_iounmap(pdev, regs); - release_regions: - pci_release_regions(pdev); - disable_device: - pci_disable_device(pdev); - done: - return retval; -} - -/** - * ci13xxx_pci_remove: PCI remove - * @pdev: USB Device Controller being removed - * - * Reverses the effect of ci13xxx_pci_probe(), - * first invoking the udc_remove() and then releases - * all PCI resources allocated for this USB device controller - */ -static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) -{ - free_irq(pdev->irq, pdev); - udc_remove(); - pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev)); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -/** - * PCI device table - * PCI device structure - * - * Check "pci.h" for details - */ -static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = { - { PCI_DEVICE(0x153F, 0x1004) }, - { PCI_DEVICE(0x153F, 0x1006) }, - { 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ } -}; -MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table); - -static struct pci_driver ci13xxx_pci_driver = { - .name = UDC_DRIVER_NAME, - .id_table = ci13xxx_pci_id_table, - .probe = ci13xxx_pci_probe, - .remove = __devexit_p(ci13xxx_pci_remove), -}; - -/** - * ci13xxx_pci_init: module init - * - * Driver load - */ -static int __init ci13xxx_pci_init(void) -{ - return pci_register_driver(&ci13xxx_pci_driver); -} -module_init(ci13xxx_pci_init); - -/** - * ci13xxx_pci_exit: module exit - * - * Driver unload - */ -static void __exit ci13xxx_pci_exit(void) -{ - pci_unregister_driver(&ci13xxx_pci_driver); -} -module_exit(ci13xxx_pci_exit); - -MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>"); -MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("June 2008"); diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c deleted file mode 100644 index 243ef1adf969..000000000000 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ /dev/null @@ -1,2996 +0,0 @@ -/* - * ci13xxx_udc.c - MIPS USB IP core family device controller - * - * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. - * - * Author: David Lopo - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * Description: MIPS USB IP core family device controller - * Currently it only supports IP part number CI13412 - * - * This driver is composed of several blocks: - * - HW: hardware interface - * - DBG: debug facilities (optional) - * - UTIL: utilities - * - ISR: interrupts handling - * - ENDPT: endpoint operations (Gadget API) - * - GADGET: gadget operations (Gadget API) - * - BUS: bus glue code, bus abstraction layer - * - * Compile Options - * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities - * - STALL_IN: non-empty bulk-in pipes cannot be halted - * if defined mass storage compliance succeeds but with warnings - * => case 4: Hi > Dn - * => case 5: Hi > Di - * => case 8: Hi <> Do - * if undefined usbtest 13 fails - * - TRACE: enable function tracing (depends on DEBUG) - * - * Main Features - * - Chapter 9 & Mass Storage Compliance with Gadget File Storage - * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) - * - Normal & LPM support - * - * USBTEST Report - * - OK: 0-12, 13 (STALL_IN defined) & 14 - * - Not Supported: 15 & 16 (ISO) - * - * TODO List - * - OTG - * - Isochronous & Interrupt Traffic - * - Handle requests which spawns into several TDs - * - GET_STATUS(device) - always reports 0 - * - Gadget API (majority of optional features) - * - Suspend & Remote Wakeup - */ -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/dmapool.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb/otg.h> - -#include "ci13xxx_udc.h" - - -/****************************************************************************** - * DEFINE - *****************************************************************************/ - -#define DMA_ADDR_INVALID (~(dma_addr_t)0) - -/* ctrl register bank access */ -static DEFINE_SPINLOCK(udc_lock); - -/* control endpoint description */ -static const struct usb_endpoint_descriptor -ctrl_endpt_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_CONTROL, - .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), -}; - -static const struct usb_endpoint_descriptor -ctrl_endpt_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_CONTROL, - .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), -}; - -/* UDC descriptor */ -static struct ci13xxx *_udc; - -/* Interrupt statistics */ -#define ISR_MASK 0x1F -static struct { - u32 test; - u32 ui; - u32 uei; - u32 pci; - u32 uri; - u32 sli; - u32 none; - struct { - u32 cnt; - u32 buf[ISR_MASK+1]; - u32 idx; - } hndl; -} isr_statistics; - -/** - * ffs_nr: find first (least significant) bit set - * @x: the word to search - * - * This function returns bit number (instead of position) - */ -static int ffs_nr(u32 x) -{ - int n = ffs(x); - - return n ? n-1 : 32; -} - -/****************************************************************************** - * HW block - *****************************************************************************/ -/* register bank descriptor */ -static struct { - unsigned lpm; /* is LPM? */ - void __iomem *abs; /* bus map offset */ - void __iomem *cap; /* bus map offset + CAP offset + CAP data */ - size_t size; /* bank size */ -} hw_bank; - -/* MSM specific */ -#define ABS_AHBBURST (0x0090UL) -#define ABS_AHBMODE (0x0098UL) -/* UDC register map */ -#define ABS_CAPLENGTH (0x100UL) -#define ABS_HCCPARAMS (0x108UL) -#define ABS_DCCPARAMS (0x124UL) -#define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL) -/* offset to CAPLENTGH (addr + data) */ -#define CAP_USBCMD (0x000UL) -#define CAP_USBSTS (0x004UL) -#define CAP_USBINTR (0x008UL) -#define CAP_DEVICEADDR (0x014UL) -#define CAP_ENDPTLISTADDR (0x018UL) -#define CAP_PORTSC (0x044UL) -#define CAP_DEVLC (0x084UL) -#define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) -#define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) -#define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) -#define CAP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL) -#define CAP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL) -#define CAP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL) -#define CAP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL) -#define CAP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL) - -/* maximum number of enpoints: valid only after hw_device_reset() */ -static unsigned hw_ep_max; - -/** - * hw_ep_bit: calculates the bit number - * @num: endpoint number - * @dir: endpoint direction - * - * This function returns bit number - */ -static inline int hw_ep_bit(int num, int dir) -{ - return num + (dir ? 16 : 0); -} - -static int ep_to_bit(int n) -{ - int fill = 16 - hw_ep_max / 2; - - if (n >= hw_ep_max / 2) - n += fill; - - return n; -} - -/** - * hw_aread: reads from register bitfield - * @addr: address relative to bus map - * @mask: bitfield mask - * - * This function returns register bitfield data - */ -static u32 hw_aread(u32 addr, u32 mask) -{ - return ioread32(addr + hw_bank.abs) & mask; -} - -/** - * hw_awrite: writes to register bitfield - * @addr: address relative to bus map - * @mask: bitfield mask - * @data: new data - */ -static void hw_awrite(u32 addr, u32 mask, u32 data) -{ - iowrite32(hw_aread(addr, ~mask) | (data & mask), - addr + hw_bank.abs); -} - -/** - * hw_cread: reads from register bitfield - * @addr: address relative to CAP offset plus content - * @mask: bitfield mask - * - * This function returns register bitfield data - */ -static u32 hw_cread(u32 addr, u32 mask) -{ - return ioread32(addr + hw_bank.cap) & mask; -} - -/** - * hw_cwrite: writes to register bitfield - * @addr: address relative to CAP offset plus content - * @mask: bitfield mask - * @data: new data - */ -static void hw_cwrite(u32 addr, u32 mask, u32 data) -{ - iowrite32(hw_cread(addr, ~mask) | (data & mask), - addr + hw_bank.cap); -} - -/** - * hw_ctest_and_clear: tests & clears register bitfield - * @addr: address relative to CAP offset plus content - * @mask: bitfield mask - * - * This function returns register bitfield data - */ -static u32 hw_ctest_and_clear(u32 addr, u32 mask) -{ - u32 reg = hw_cread(addr, mask); - - iowrite32(reg, addr + hw_bank.cap); - return reg; -} - -/** - * hw_ctest_and_write: tests & writes register bitfield - * @addr: address relative to CAP offset plus content - * @mask: bitfield mask - * @data: new data - * - * This function returns register bitfield data - */ -static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data) -{ - u32 reg = hw_cread(addr, ~0); - - iowrite32((reg & ~mask) | (data & mask), addr + hw_bank.cap); - return (reg & mask) >> ffs_nr(mask); -} - -static int hw_device_init(void __iomem *base) -{ - u32 reg; - - /* bank is a module variable */ - hw_bank.abs = base; - - hw_bank.cap = hw_bank.abs; - hw_bank.cap += ABS_CAPLENGTH; - hw_bank.cap += ioread8(hw_bank.cap); - - reg = hw_aread(ABS_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN); - hw_bank.lpm = reg; - hw_bank.size = hw_bank.cap - hw_bank.abs; - hw_bank.size += CAP_LAST; - hw_bank.size /= sizeof(u32); - - reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); - hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ - - if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX) - return -ENODEV; - - /* setup lock mode ? */ - - /* ENDPTSETUPSTAT is '0' by default */ - - /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ - - return 0; -} -/** - * hw_device_reset: resets chip (execute without interruption) - * @base: register base address - * - * This function returns an error code - */ -static int hw_device_reset(struct ci13xxx *udc) -{ - /* should flush & stop before reset */ - hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); - hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); - - hw_cwrite(CAP_USBCMD, USBCMD_RST, USBCMD_RST); - while (hw_cread(CAP_USBCMD, USBCMD_RST)) - udelay(10); /* not RTOS friendly */ - - - if (udc->udc_driver->notify_event) - udc->udc_driver->notify_event(udc, - CI13XXX_CONTROLLER_RESET_EVENT); - - if (udc->udc_driver->flags & CI13XXX_DISABLE_STREAMING) - hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS); - - /* USBMODE should be configured step by step */ - hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); - hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); - hw_cwrite(CAP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); /* HW >= 2.3 */ - - if (hw_cread(CAP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { - pr_err("cannot enter in device mode"); - pr_err("lpm = %i", hw_bank.lpm); - return -ENODEV; - } - - return 0; -} - -/** - * hw_device_state: enables/disables interrupts & starts/stops device (execute - * without interruption) - * @dma: 0 => disable, !0 => enable and set dma engine - * - * This function returns an error code - */ -static int hw_device_state(u32 dma) -{ - if (dma) { - hw_cwrite(CAP_ENDPTLISTADDR, ~0, dma); - /* interrupt, error, port change, reset, sleep/suspend */ - hw_cwrite(CAP_USBINTR, ~0, - USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_cwrite(CAP_USBCMD, USBCMD_RS, USBCMD_RS); - } else { - hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); - hw_cwrite(CAP_USBINTR, ~0, 0); - } - return 0; -} - -/** - * hw_ep_flush: flush endpoint fifo (execute without interruption) - * @num: endpoint number - * @dir: endpoint direction - * - * This function returns an error code - */ -static int hw_ep_flush(int num, int dir) -{ - int n = hw_ep_bit(num, dir); - - do { - /* flush any pending transfer */ - hw_cwrite(CAP_ENDPTFLUSH, BIT(n), BIT(n)); - while (hw_cread(CAP_ENDPTFLUSH, BIT(n))) - cpu_relax(); - } while (hw_cread(CAP_ENDPTSTAT, BIT(n))); - - return 0; -} - -/** - * hw_ep_disable: disables endpoint (execute without interruption) - * @num: endpoint number - * @dir: endpoint direction - * - * This function returns an error code - */ -static int hw_ep_disable(int num, int dir) -{ - hw_ep_flush(num, dir); - hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), - dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); - return 0; -} - -/** - * hw_ep_enable: enables endpoint (execute without interruption) - * @num: endpoint number - * @dir: endpoint direction - * @type: endpoint type - * - * This function returns an error code - */ -static int hw_ep_enable(int num, int dir, int type) -{ - u32 mask, data; - - if (dir) { - mask = ENDPTCTRL_TXT; /* type */ - data = type << ffs_nr(mask); - - mask |= ENDPTCTRL_TXS; /* unstall */ - mask |= ENDPTCTRL_TXR; /* reset data toggle */ - data |= ENDPTCTRL_TXR; - mask |= ENDPTCTRL_TXE; /* enable */ - data |= ENDPTCTRL_TXE; - } else { - mask = ENDPTCTRL_RXT; /* type */ - data = type << ffs_nr(mask); - - mask |= ENDPTCTRL_RXS; /* unstall */ - mask |= ENDPTCTRL_RXR; /* reset data toggle */ - data |= ENDPTCTRL_RXR; - mask |= ENDPTCTRL_RXE; /* enable */ - data |= ENDPTCTRL_RXE; - } - hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), mask, data); - return 0; -} - -/** - * hw_ep_get_halt: return endpoint halt status - * @num: endpoint number - * @dir: endpoint direction - * - * This function returns 1 if endpoint halted - */ -static int hw_ep_get_halt(int num, int dir) -{ - u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - - return hw_cread(CAP_ENDPTCTRL + num * sizeof(u32), mask) ? 1 : 0; -} - -/** - * hw_test_and_clear_setup_status: test & clear setup status (execute without - * interruption) - * @n: endpoint number - * - * This function returns setup status - */ -static int hw_test_and_clear_setup_status(int n) -{ - n = ep_to_bit(n); - return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT, BIT(n)); -} - -/** - * hw_ep_prime: primes endpoint (execute without interruption) - * @num: endpoint number - * @dir: endpoint direction - * @is_ctrl: true if control endpoint - * - * This function returns an error code - */ -static int hw_ep_prime(int num, int dir, int is_ctrl) -{ - int n = hw_ep_bit(num, dir); - - if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) - return -EAGAIN; - - hw_cwrite(CAP_ENDPTPRIME, BIT(n), BIT(n)); - - while (hw_cread(CAP_ENDPTPRIME, BIT(n))) - cpu_relax(); - if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) - return -EAGAIN; - - /* status shoult be tested according with manual but it doesn't work */ - return 0; -} - -/** - * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute - * without interruption) - * @num: endpoint number - * @dir: endpoint direction - * @value: true => stall, false => unstall - * - * This function returns an error code - */ -static int hw_ep_set_halt(int num, int dir, int value) -{ - if (value != 0 && value != 1) - return -EINVAL; - - do { - u32 addr = CAP_ENDPTCTRL + num * sizeof(u32); - u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; - - /* data toggle - reserved for EP0 but it's in ESS */ - hw_cwrite(addr, mask_xs|mask_xr, value ? mask_xs : mask_xr); - - } while (value != hw_ep_get_halt(num, dir)); - - return 0; -} - -/** - * hw_intr_clear: disables interrupt & clears interrupt status (execute without - * interruption) - * @n: interrupt bit - * - * This function returns an error code - */ -static int hw_intr_clear(int n) -{ - if (n >= REG_BITS) - return -EINVAL; - - hw_cwrite(CAP_USBINTR, BIT(n), 0); - hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); - return 0; -} - -/** - * hw_intr_force: enables interrupt & forces interrupt status (execute without - * interruption) - * @n: interrupt bit - * - * This function returns an error code - */ -static int hw_intr_force(int n) -{ - if (n >= REG_BITS) - return -EINVAL; - - hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); - hw_cwrite(CAP_USBINTR, BIT(n), BIT(n)); - hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); - hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, 0); - return 0; -} - -/** - * hw_is_port_high_speed: test if port is high speed - * - * This function returns true if high speed port - */ -static int hw_port_is_high_speed(void) -{ - return hw_bank.lpm ? hw_cread(CAP_DEVLC, DEVLC_PSPD) : - hw_cread(CAP_PORTSC, PORTSC_HSP); -} - -/** - * hw_port_test_get: reads port test mode value - * - * This function returns port test mode value - */ -static u8 hw_port_test_get(void) -{ - return hw_cread(CAP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); -} - -/** - * hw_port_test_set: writes port test mode (execute without interruption) - * @mode: new value - * - * This function returns an error code - */ -static int hw_port_test_set(u8 mode) -{ - const u8 TEST_MODE_MAX = 7; - - if (mode > TEST_MODE_MAX) - return -EINVAL; - - hw_cwrite(CAP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); - return 0; -} - -/** - * hw_read_intr_enable: returns interrupt enable register - * - * This function returns register data - */ -static u32 hw_read_intr_enable(void) -{ - return hw_cread(CAP_USBINTR, ~0); -} - -/** - * hw_read_intr_status: returns interrupt status register - * - * This function returns register data - */ -static u32 hw_read_intr_status(void) -{ - return hw_cread(CAP_USBSTS, ~0); -} - -/** - * hw_register_read: reads all device registers (execute without interruption) - * @buf: destination buffer - * @size: buffer size - * - * This function returns number of registers read - */ -static size_t hw_register_read(u32 *buf, size_t size) -{ - unsigned i; - - if (size > hw_bank.size) - size = hw_bank.size; - - for (i = 0; i < size; i++) - buf[i] = hw_aread(i * sizeof(u32), ~0); - - return size; -} - -/** - * hw_register_write: writes to register - * @addr: register address - * @data: register value - * - * This function returns an error code - */ -static int hw_register_write(u16 addr, u32 data) -{ - /* align */ - addr /= sizeof(u32); - - if (addr >= hw_bank.size) - return -EINVAL; - - /* align */ - addr *= sizeof(u32); - - hw_awrite(addr, ~0, data); - return 0; -} - -/** - * hw_test_and_clear_complete: test & clear complete status (execute without - * interruption) - * @n: endpoint number - * - * This function returns complete status - */ -static int hw_test_and_clear_complete(int n) -{ - n = ep_to_bit(n); - return hw_ctest_and_clear(CAP_ENDPTCOMPLETE, BIT(n)); -} - -/** - * hw_test_and_clear_intr_active: test & clear active interrupts (execute - * without interruption) - * - * This function returns active interrutps - */ -static u32 hw_test_and_clear_intr_active(void) -{ - u32 reg = hw_read_intr_status() & hw_read_intr_enable(); - - hw_cwrite(CAP_USBSTS, ~0, reg); - return reg; -} - -/** - * hw_test_and_clear_setup_guard: test & clear setup guard (execute without - * interruption) - * - * This function returns guard value - */ -static int hw_test_and_clear_setup_guard(void) -{ - return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, 0); -} - -/** - * hw_test_and_set_setup_guard: test & set setup guard (execute without - * interruption) - * - * This function returns guard value - */ -static int hw_test_and_set_setup_guard(void) -{ - return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); -} - -/** - * hw_usb_set_address: configures USB address (execute without interruption) - * @value: new USB address - * - * This function returns an error code - */ -static int hw_usb_set_address(u8 value) -{ - /* advance */ - hw_cwrite(CAP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA, - value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); - return 0; -} - -/** - * hw_usb_reset: restart device after a bus reset (execute without - * interruption) - * - * This function returns an error code - */ -static int hw_usb_reset(void) -{ - hw_usb_set_address(0); - - /* ESS flushes only at end?!? */ - hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); /* flush all EPs */ - - /* clear setup token semaphores */ - hw_cwrite(CAP_ENDPTSETUPSTAT, 0, 0); /* writes its content */ - - /* clear complete status */ - hw_cwrite(CAP_ENDPTCOMPLETE, 0, 0); /* writes its content */ - - /* wait until all bits cleared */ - while (hw_cread(CAP_ENDPTPRIME, ~0)) - udelay(10); /* not RTOS friendly */ - - /* reset all endpoints ? */ - - /* reset internal status and wait for further instructions - no need to verify the port reset status (ESS does it) */ - - return 0; -} - -/****************************************************************************** - * DBG block - *****************************************************************************/ -/** - * show_device: prints information about device capabilities and status - * - * Check "device.h" for details - */ -static ssize_t show_device(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - struct usb_gadget *gadget = &udc->gadget; - int n = 0; - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - n += scnprintf(buf + n, PAGE_SIZE - n, "speed = %d\n", - gadget->speed); - n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed = %d\n", - gadget->max_speed); - /* TODO: Scheduled for removal in 3.8. */ - n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed = %d\n", - gadget_is_dualspeed(gadget)); - n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg = %d\n", - gadget->is_otg); - n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral = %d\n", - gadget->is_a_peripheral); - n += scnprintf(buf + n, PAGE_SIZE - n, "b_hnp_enable = %d\n", - gadget->b_hnp_enable); - n += scnprintf(buf + n, PAGE_SIZE - n, "a_hnp_support = %d\n", - gadget->a_hnp_support); - n += scnprintf(buf + n, PAGE_SIZE - n, "a_alt_hnp_support = %d\n", - gadget->a_alt_hnp_support); - n += scnprintf(buf + n, PAGE_SIZE - n, "name = %s\n", - (gadget->name ? gadget->name : "")); - - return n; -} -static DEVICE_ATTR(device, S_IRUSR, show_device, NULL); - -/** - * show_driver: prints information about attached gadget (if any) - * - * Check "device.h" for details - */ -static ssize_t show_driver(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - struct usb_gadget_driver *driver = udc->driver; - int n = 0; - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - if (driver == NULL) - return scnprintf(buf, PAGE_SIZE, - "There is no gadget attached!\n"); - - n += scnprintf(buf + n, PAGE_SIZE - n, "function = %s\n", - (driver->function ? driver->function : "")); - n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n", - driver->max_speed); - - return n; -} -static DEVICE_ATTR(driver, S_IRUSR, show_driver, NULL); - -/* Maximum event message length */ -#define DBG_DATA_MSG 64UL - -/* Maximum event messages */ -#define DBG_DATA_MAX 128UL - -/* Event buffer descriptor */ -static struct { - char (buf[DBG_DATA_MAX])[DBG_DATA_MSG]; /* buffer */ - unsigned idx; /* index */ - unsigned tty; /* print to console? */ - rwlock_t lck; /* lock */ -} dbg_data = { - .idx = 0, - .tty = 0, - .lck = __RW_LOCK_UNLOCKED(lck) -}; - -/** - * dbg_dec: decrements debug event index - * @idx: buffer index - */ -static void dbg_dec(unsigned *idx) -{ - *idx = (*idx - 1) & (DBG_DATA_MAX-1); -} - -/** - * dbg_inc: increments debug event index - * @idx: buffer index - */ -static void dbg_inc(unsigned *idx) -{ - *idx = (*idx + 1) & (DBG_DATA_MAX-1); -} - -/** - * dbg_print: prints the common part of the event - * @addr: endpoint address - * @name: event name - * @status: status - * @extra: extra information - */ -static void dbg_print(u8 addr, const char *name, int status, const char *extra) -{ - struct timeval tval; - unsigned int stamp; - unsigned long flags; - - write_lock_irqsave(&dbg_data.lck, flags); - - do_gettimeofday(&tval); - stamp = tval.tv_sec & 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s */ - stamp = stamp * 1000000 + tval.tv_usec; - - scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG, - "%04X\t? %02X %-7.7s %4i ?\t%s\n", - stamp, addr, name, status, extra); - - dbg_inc(&dbg_data.idx); - - write_unlock_irqrestore(&dbg_data.lck, flags); - - if (dbg_data.tty != 0) - pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n", - stamp, addr, name, status, extra); -} - -/** - * dbg_done: prints a DONE event - * @addr: endpoint address - * @td: transfer descriptor - * @status: status - */ -static void dbg_done(u8 addr, const u32 token, int status) -{ - char msg[DBG_DATA_MSG]; - - scnprintf(msg, sizeof(msg), "%d %02X", - (int)(token & TD_TOTAL_BYTES) >> ffs_nr(TD_TOTAL_BYTES), - (int)(token & TD_STATUS) >> ffs_nr(TD_STATUS)); - dbg_print(addr, "DONE", status, msg); -} - -/** - * dbg_event: prints a generic event - * @addr: endpoint address - * @name: event name - * @status: status - */ -static void dbg_event(u8 addr, const char *name, int status) -{ - if (name != NULL) - dbg_print(addr, name, status, ""); -} - -/* - * dbg_queue: prints a QUEUE event - * @addr: endpoint address - * @req: USB request - * @status: status - */ -static void dbg_queue(u8 addr, const struct usb_request *req, int status) -{ - char msg[DBG_DATA_MSG]; - - if (req != NULL) { - scnprintf(msg, sizeof(msg), - "%d %d", !req->no_interrupt, req->length); - dbg_print(addr, "QUEUE", status, msg); - } -} - -/** - * dbg_setup: prints a SETUP event - * @addr: endpoint address - * @req: setup request - */ -static void dbg_setup(u8 addr, const struct usb_ctrlrequest *req) -{ - char msg[DBG_DATA_MSG]; - - if (req != NULL) { - scnprintf(msg, sizeof(msg), - "%02X %02X %04X %04X %d", req->bRequestType, - req->bRequest, le16_to_cpu(req->wValue), - le16_to_cpu(req->wIndex), le16_to_cpu(req->wLength)); - dbg_print(addr, "SETUP", 0, msg); - } -} - -/** - * show_events: displays the event buffer - * - * Check "device.h" for details - */ -static ssize_t show_events(struct device *dev, struct device_attribute *attr, - char *buf) -{ - unsigned long flags; - unsigned i, j, n = 0; - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - read_lock_irqsave(&dbg_data.lck, flags); - - i = dbg_data.idx; - for (dbg_dec(&i); i != dbg_data.idx; dbg_dec(&i)) { - n += strlen(dbg_data.buf[i]); - if (n >= PAGE_SIZE) { - n -= strlen(dbg_data.buf[i]); - break; - } - } - for (j = 0, dbg_inc(&i); j < n; dbg_inc(&i)) - j += scnprintf(buf + j, PAGE_SIZE - j, - "%s", dbg_data.buf[i]); - - read_unlock_irqrestore(&dbg_data.lck, flags); - - return n; -} - -/** - * store_events: configure if events are going to be also printed to console - * - * Check "device.h" for details - */ -static ssize_t store_events(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - unsigned tty; - - dbg_trace("[%s] %p, %d\n", __func__, buf, count); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - goto done; - } - - if (sscanf(buf, "%u", &tty) != 1 || tty > 1) { - dev_err(dev, "<1|0>: enable|disable console log\n"); - goto done; - } - - dbg_data.tty = tty; - dev_info(dev, "tty = %u", dbg_data.tty); - - done: - return count; -} -static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events); - -/** - * show_inters: interrupt status, enable status and historic - * - * Check "device.h" for details - */ -static ssize_t show_inters(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - u32 intr; - unsigned i, j, n = 0; - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - spin_lock_irqsave(udc->lock, flags); - - n += scnprintf(buf + n, PAGE_SIZE - n, - "status = %08x\n", hw_read_intr_status()); - n += scnprintf(buf + n, PAGE_SIZE - n, - "enable = %08x\n", hw_read_intr_enable()); - - n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n", - isr_statistics.test); - n += scnprintf(buf + n, PAGE_SIZE - n, "? ui = %d\n", - isr_statistics.ui); - n += scnprintf(buf + n, PAGE_SIZE - n, "? uei = %d\n", - isr_statistics.uei); - n += scnprintf(buf + n, PAGE_SIZE - n, "? pci = %d\n", - isr_statistics.pci); - n += scnprintf(buf + n, PAGE_SIZE - n, "? uri = %d\n", - isr_statistics.uri); - n += scnprintf(buf + n, PAGE_SIZE - n, "? sli = %d\n", - isr_statistics.sli); - n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n", - isr_statistics.none); - n += scnprintf(buf + n, PAGE_SIZE - n, "*hndl = %d\n", - isr_statistics.hndl.cnt); - - for (i = isr_statistics.hndl.idx, j = 0; j <= ISR_MASK; j++, i++) { - i &= ISR_MASK; - intr = isr_statistics.hndl.buf[i]; - - if (USBi_UI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "ui "); - intr &= ~USBi_UI; - if (USBi_UEI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "uei "); - intr &= ~USBi_UEI; - if (USBi_PCI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "pci "); - intr &= ~USBi_PCI; - if (USBi_URI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "uri "); - intr &= ~USBi_URI; - if (USBi_SLI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "sli "); - intr &= ~USBi_SLI; - if (intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "??? "); - if (isr_statistics.hndl.buf[i]) - n += scnprintf(buf + n, PAGE_SIZE - n, "\n"); - } - - spin_unlock_irqrestore(udc->lock, flags); - - return n; -} - -/** - * store_inters: enable & force or disable an individual interrutps - * (to be used for test purposes only) - * - * Check "device.h" for details - */ -static ssize_t store_inters(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - unsigned en, bit; - - dbg_trace("[%s] %p, %d\n", __func__, buf, count); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - goto done; - } - - if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) { - dev_err(dev, "<1|0> <bit>: enable|disable interrupt"); - goto done; - } - - spin_lock_irqsave(udc->lock, flags); - if (en) { - if (hw_intr_force(bit)) - dev_err(dev, "invalid bit number\n"); - else - isr_statistics.test++; - } else { - if (hw_intr_clear(bit)) - dev_err(dev, "invalid bit number\n"); - } - spin_unlock_irqrestore(udc->lock, flags); - - done: - return count; -} -static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters); - -/** - * show_port_test: reads port test mode - * - * Check "device.h" for details - */ -static ssize_t show_port_test(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - unsigned mode; - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - spin_lock_irqsave(udc->lock, flags); - mode = hw_port_test_get(); - spin_unlock_irqrestore(udc->lock, flags); - - return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode); -} - -/** - * store_port_test: writes port test mode - * - * Check "device.h" for details - */ -static ssize_t store_port_test(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - unsigned mode; - - dbg_trace("[%s] %p, %d\n", __func__, buf, count); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - goto done; - } - - if (sscanf(buf, "%u", &mode) != 1) { - dev_err(dev, "<mode>: set port test mode"); - goto done; - } - - spin_lock_irqsave(udc->lock, flags); - if (hw_port_test_set(mode)) - dev_err(dev, "invalid mode\n"); - spin_unlock_irqrestore(udc->lock, flags); - - done: - return count; -} -static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR, - show_port_test, store_port_test); - -/** - * show_qheads: DMA contents of all queue heads - * - * Check "device.h" for details - */ -static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - unsigned i, j, n = 0; - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - spin_lock_irqsave(udc->lock, flags); - for (i = 0; i < hw_ep_max/2; i++) { - struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; - struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2]; - n += scnprintf(buf + n, PAGE_SIZE - n, - "EP=%02i: RX=%08X TX=%08X\n", - i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); - for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) { - n += scnprintf(buf + n, PAGE_SIZE - n, - " %04X: %08X %08X\n", j, - *((u32 *)mEpRx->qh.ptr + j), - *((u32 *)mEpTx->qh.ptr + j)); - } - } - spin_unlock_irqrestore(udc->lock, flags); - - return n; -} -static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL); - -/** - * show_registers: dumps all registers - * - * Check "device.h" for details - */ -#define DUMP_ENTRIES 512 -static ssize_t show_registers(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - u32 *dump; - unsigned i, k, n = 0; - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL); - if (!dump) { - dev_err(dev, "%s: out of memory\n", __func__); - return 0; - } - - spin_lock_irqsave(udc->lock, flags); - k = hw_register_read(dump, DUMP_ENTRIES); - spin_unlock_irqrestore(udc->lock, flags); - - for (i = 0; i < k; i++) { - n += scnprintf(buf + n, PAGE_SIZE - n, - "reg[0x%04X] = 0x%08X\n", - i * (unsigned)sizeof(u32), dump[i]); - } - kfree(dump); - - return n; -} - -/** - * store_registers: writes value to register address - * - * Check "device.h" for details - */ -static ssize_t store_registers(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long addr, data, flags; - - dbg_trace("[%s] %p, %d\n", __func__, buf, count); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - goto done; - } - - if (sscanf(buf, "%li %li", &addr, &data) != 2) { - dev_err(dev, "<addr> <data>: write data to register address"); - goto done; - } - - spin_lock_irqsave(udc->lock, flags); - if (hw_register_write(addr, data)) - dev_err(dev, "invalid address range\n"); - spin_unlock_irqrestore(udc->lock, flags); - - done: - return count; -} -static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR, - show_registers, store_registers); - -/** - * show_requests: DMA contents of all requests currently queued (all endpts) - * - * Check "device.h" for details - */ -static ssize_t show_requests(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - struct list_head *ptr = NULL; - struct ci13xxx_req *req = NULL; - unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); - - dbg_trace("[%s] %p\n", __func__, buf); - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - spin_lock_irqsave(udc->lock, flags); - for (i = 0; i < hw_ep_max; i++) - list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) - { - req = list_entry(ptr, struct ci13xxx_req, queue); - - n += scnprintf(buf + n, PAGE_SIZE - n, - "EP=%02i: TD=%08X %s\n", - i % hw_ep_max/2, (u32)req->dma, - ((i < hw_ep_max/2) ? "RX" : "TX")); - - for (j = 0; j < qSize; j++) - n += scnprintf(buf + n, PAGE_SIZE - n, - " %04X: %08X\n", j, - *((u32 *)req->ptr + j)); - } - spin_unlock_irqrestore(udc->lock, flags); - - return n; -} -static DEVICE_ATTR(requests, S_IRUSR, show_requests, NULL); - -/** - * dbg_create_files: initializes the attribute interface - * @dev: device - * - * This function returns an error code - */ -__maybe_unused static int dbg_create_files(struct device *dev) -{ - int retval = 0; - - if (dev == NULL) - return -EINVAL; - retval = device_create_file(dev, &dev_attr_device); - if (retval) - goto done; - retval = device_create_file(dev, &dev_attr_driver); - if (retval) - goto rm_device; - retval = device_create_file(dev, &dev_attr_events); - if (retval) - goto rm_driver; - retval = device_create_file(dev, &dev_attr_inters); - if (retval) - goto rm_events; - retval = device_create_file(dev, &dev_attr_port_test); - if (retval) - goto rm_inters; - retval = device_create_file(dev, &dev_attr_qheads); - if (retval) - goto rm_port_test; - retval = device_create_file(dev, &dev_attr_registers); - if (retval) - goto rm_qheads; - retval = device_create_file(dev, &dev_attr_requests); - if (retval) - goto rm_registers; - return 0; - - rm_registers: - device_remove_file(dev, &dev_attr_registers); - rm_qheads: - device_remove_file(dev, &dev_attr_qheads); - rm_port_test: - device_remove_file(dev, &dev_attr_port_test); - rm_inters: - device_remove_file(dev, &dev_attr_inters); - rm_events: - device_remove_file(dev, &dev_attr_events); - rm_driver: - device_remove_file(dev, &dev_attr_driver); - rm_device: - device_remove_file(dev, &dev_attr_device); - done: - return retval; -} - -/** - * dbg_remove_files: destroys the attribute interface - * @dev: device - * - * This function returns an error code - */ -__maybe_unused static int dbg_remove_files(struct device *dev) -{ - if (dev == NULL) - return -EINVAL; - device_remove_file(dev, &dev_attr_requests); - device_remove_file(dev, &dev_attr_registers); - device_remove_file(dev, &dev_attr_qheads); - device_remove_file(dev, &dev_attr_port_test); - device_remove_file(dev, &dev_attr_inters); - device_remove_file(dev, &dev_attr_events); - device_remove_file(dev, &dev_attr_driver); - device_remove_file(dev, &dev_attr_device); - return 0; -} - -/****************************************************************************** - * UTIL block - *****************************************************************************/ -/** - * _usb_addr: calculates endpoint address from direction & number - * @ep: endpoint - */ -static inline u8 _usb_addr(struct ci13xxx_ep *ep) -{ - return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num; -} - -/** - * _hardware_queue: configures a request at hardware level - * @gadget: gadget - * @mEp: endpoint - * - * This function returns an error code - */ -static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) -{ - unsigned i; - int ret = 0; - unsigned length = mReq->req.length; - - trace("%p, %p", mEp, mReq); - - /* don't queue twice */ - if (mReq->req.status == -EALREADY) - return -EALREADY; - - mReq->req.status = -EALREADY; - if (length && mReq->req.dma == DMA_ADDR_INVALID) { - mReq->req.dma = \ - dma_map_single(mEp->device, mReq->req.buf, - length, mEp->dir ? DMA_TO_DEVICE : - DMA_FROM_DEVICE); - if (mReq->req.dma == 0) - return -ENOMEM; - - mReq->map = 1; - } - - if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) { - mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC, - &mReq->zdma); - if (mReq->zptr == NULL) { - if (mReq->map) { - dma_unmap_single(mEp->device, mReq->req.dma, - length, mEp->dir ? DMA_TO_DEVICE : - DMA_FROM_DEVICE); - mReq->req.dma = DMA_ADDR_INVALID; - mReq->map = 0; - } - return -ENOMEM; - } - memset(mReq->zptr, 0, sizeof(*mReq->zptr)); - mReq->zptr->next = TD_TERMINATE; - mReq->zptr->token = TD_STATUS_ACTIVE; - if (!mReq->req.no_interrupt) - mReq->zptr->token |= TD_IOC; - } - /* - * TD configuration - * TODO - handle requests which spawns into several TDs - */ - memset(mReq->ptr, 0, sizeof(*mReq->ptr)); - mReq->ptr->token = length << ffs_nr(TD_TOTAL_BYTES); - mReq->ptr->token &= TD_TOTAL_BYTES; - mReq->ptr->token |= TD_STATUS_ACTIVE; - if (mReq->zptr) { - mReq->ptr->next = mReq->zdma; - } else { - mReq->ptr->next = TD_TERMINATE; - if (!mReq->req.no_interrupt) - mReq->ptr->token |= TD_IOC; - } - mReq->ptr->page[0] = mReq->req.dma; - for (i = 1; i < 5; i++) - mReq->ptr->page[i] = - (mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK; - - if (!list_empty(&mEp->qh.queue)) { - struct ci13xxx_req *mReqPrev; - int n = hw_ep_bit(mEp->num, mEp->dir); - int tmp_stat; - - mReqPrev = list_entry(mEp->qh.queue.prev, - struct ci13xxx_req, queue); - if (mReqPrev->zptr) - mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK; - else - mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; - wmb(); - if (hw_cread(CAP_ENDPTPRIME, BIT(n))) - goto done; - do { - hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); - tmp_stat = hw_cread(CAP_ENDPTSTAT, BIT(n)); - } while (!hw_cread(CAP_USBCMD, USBCMD_ATDTW)); - hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, 0); - if (tmp_stat) - goto done; - } - - /* QH configuration */ - mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */ - mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */ - mEp->qh.ptr->cap |= QH_ZLT; - - wmb(); /* synchronize before ep prime */ - - ret = hw_ep_prime(mEp->num, mEp->dir, - mEp->type == USB_ENDPOINT_XFER_CONTROL); -done: - return ret; -} - -/** - * _hardware_dequeue: handles a request at hardware level - * @gadget: gadget - * @mEp: endpoint - * - * This function returns an error code - */ -static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) -{ - trace("%p, %p", mEp, mReq); - - if (mReq->req.status != -EALREADY) - return -EINVAL; - - if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0) - return -EBUSY; - - if (mReq->zptr) { - if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0) - return -EBUSY; - dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma); - mReq->zptr = NULL; - } - - mReq->req.status = 0; - - if (mReq->map) { - dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, - mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = DMA_ADDR_INVALID; - mReq->map = 0; - } - - mReq->req.status = mReq->ptr->token & TD_STATUS; - if ((TD_STATUS_HALTED & mReq->req.status) != 0) - mReq->req.status = -1; - else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0) - mReq->req.status = -1; - else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0) - mReq->req.status = -1; - - mReq->req.actual = mReq->ptr->token & TD_TOTAL_BYTES; - mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES); - mReq->req.actual = mReq->req.length - mReq->req.actual; - mReq->req.actual = mReq->req.status ? 0 : mReq->req.actual; - - return mReq->req.actual; -} - -/** - * _ep_nuke: dequeues all endpoint requests - * @mEp: endpoint - * - * This function returns an error code - * Caller must hold lock - */ -static int _ep_nuke(struct ci13xxx_ep *mEp) -__releases(mEp->lock) -__acquires(mEp->lock) -{ - trace("%p", mEp); - - if (mEp == NULL) - return -EINVAL; - - hw_ep_flush(mEp->num, mEp->dir); - - while (!list_empty(&mEp->qh.queue)) { - - /* pop oldest request */ - struct ci13xxx_req *mReq = \ - list_entry(mEp->qh.queue.next, - struct ci13xxx_req, queue); - list_del_init(&mReq->queue); - mReq->req.status = -ESHUTDOWN; - - if (mReq->req.complete != NULL) { - spin_unlock(mEp->lock); - mReq->req.complete(&mEp->ep, &mReq->req); - spin_lock(mEp->lock); - } - } - return 0; -} - -/** - * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts - * @gadget: gadget - * - * This function returns an error code - */ -static int _gadget_stop_activity(struct usb_gadget *gadget) -{ - struct usb_ep *ep; - struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); - unsigned long flags; - - trace("%p", gadget); - - if (gadget == NULL) - return -EINVAL; - - spin_lock_irqsave(udc->lock, flags); - udc->gadget.speed = USB_SPEED_UNKNOWN; - udc->remote_wakeup = 0; - udc->suspended = 0; - spin_unlock_irqrestore(udc->lock, flags); - - /* flush all endpoints */ - gadget_for_each_ep(ep, gadget) { - usb_ep_fifo_flush(ep); - } - usb_ep_fifo_flush(&udc->ep0out.ep); - usb_ep_fifo_flush(&udc->ep0in.ep); - - udc->driver->disconnect(gadget); - - /* make sure to disable all endpoints */ - gadget_for_each_ep(ep, gadget) { - usb_ep_disable(ep); - } - - if (udc->status != NULL) { - usb_ep_free_request(&udc->ep0in.ep, udc->status); - udc->status = NULL; - } - - return 0; -} - -/****************************************************************************** - * ISR block - *****************************************************************************/ -/** - * isr_reset_handler: USB reset interrupt handler - * @udc: UDC device - * - * This function resets USB engine after a bus reset occurred - */ -static void isr_reset_handler(struct ci13xxx *udc) -__releases(udc->lock) -__acquires(udc->lock) -{ - int retval; - - trace("%p", udc); - - if (udc == NULL) { - err("EINVAL"); - return; - } - - dbg_event(0xFF, "BUS RST", 0); - - spin_unlock(udc->lock); - retval = _gadget_stop_activity(&udc->gadget); - if (retval) - goto done; - - retval = hw_usb_reset(); - if (retval) - goto done; - - udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC); - if (udc->status == NULL) - retval = -ENOMEM; - - spin_lock(udc->lock); - - done: - if (retval) - err("error: %i", retval); -} - -/** - * isr_get_status_complete: get_status request complete function - * @ep: endpoint - * @req: request handled - * - * Caller must release lock - */ -static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) -{ - trace("%p, %p", ep, req); - - if (ep == NULL || req == NULL) { - err("EINVAL"); - return; - } - - kfree(req->buf); - usb_ep_free_request(ep, req); -} - -/** - * isr_get_status_response: get_status request response - * @udc: udc struct - * @setup: setup request packet - * - * This function returns an error code - */ -static int isr_get_status_response(struct ci13xxx *udc, - struct usb_ctrlrequest *setup) -__releases(mEp->lock) -__acquires(mEp->lock) -{ - struct ci13xxx_ep *mEp = &udc->ep0in; - struct usb_request *req = NULL; - gfp_t gfp_flags = GFP_ATOMIC; - int dir, num, retval; - - trace("%p, %p", mEp, setup); - - if (mEp == NULL || setup == NULL) - return -EINVAL; - - spin_unlock(mEp->lock); - req = usb_ep_alloc_request(&mEp->ep, gfp_flags); - spin_lock(mEp->lock); - if (req == NULL) - return -ENOMEM; - - req->complete = isr_get_status_complete; - req->length = 2; - req->buf = kzalloc(req->length, gfp_flags); - if (req->buf == NULL) { - retval = -ENOMEM; - goto err_free_req; - } - - if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { - /* Assume that device is bus powered for now. */ - *((u16 *)req->buf) = _udc->remote_wakeup << 1; - retval = 0; - } else if ((setup->bRequestType & USB_RECIP_MASK) \ - == USB_RECIP_ENDPOINT) { - dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? - TX : RX; - num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; - *((u16 *)req->buf) = hw_ep_get_halt(num, dir); - } - /* else do nothing; reserved for future use */ - - spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, req, gfp_flags); - spin_lock(mEp->lock); - if (retval) - goto err_free_buf; - - return 0; - - err_free_buf: - kfree(req->buf); - err_free_req: - spin_unlock(mEp->lock); - usb_ep_free_request(&mEp->ep, req); - spin_lock(mEp->lock); - return retval; -} - -/** - * isr_setup_status_complete: setup_status request complete function - * @ep: endpoint - * @req: request handled - * - * Caller must release lock. Put the port in test mode if test mode - * feature is selected. - */ -static void -isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct ci13xxx *udc = req->context; - unsigned long flags; - - trace("%p, %p", ep, req); - - spin_lock_irqsave(udc->lock, flags); - if (udc->test_mode) - hw_port_test_set(udc->test_mode); - spin_unlock_irqrestore(udc->lock, flags); -} - -/** - * isr_setup_status_phase: queues the status phase of a setup transation - * @udc: udc struct - * - * This function returns an error code - */ -static int isr_setup_status_phase(struct ci13xxx *udc) -__releases(mEp->lock) -__acquires(mEp->lock) -{ - int retval; - struct ci13xxx_ep *mEp; - - trace("%p", udc); - - mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in; - udc->status->context = udc; - udc->status->complete = isr_setup_status_complete; - - spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); - spin_lock(mEp->lock); - - return retval; -} - -/** - * isr_tr_complete_low: transaction complete low level handler - * @mEp: endpoint - * - * This function returns an error code - * Caller must hold lock - */ -static int isr_tr_complete_low(struct ci13xxx_ep *mEp) -__releases(mEp->lock) -__acquires(mEp->lock) -{ - struct ci13xxx_req *mReq, *mReqTemp; - struct ci13xxx_ep *mEpTemp = mEp; - int uninitialized_var(retval); - - trace("%p", mEp); - - if (list_empty(&mEp->qh.queue)) - return -EINVAL; - - list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue, - queue) { - retval = _hardware_dequeue(mEp, mReq); - if (retval < 0) - break; - list_del_init(&mReq->queue); - dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); - if (mReq->req.complete != NULL) { - spin_unlock(mEp->lock); - if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && - mReq->req.length) - mEpTemp = &_udc->ep0in; - mReq->req.complete(&mEpTemp->ep, &mReq->req); - spin_lock(mEp->lock); - } - } - - if (retval == -EBUSY) - retval = 0; - if (retval < 0) - dbg_event(_usb_addr(mEp), "DONE", retval); - - return retval; -} - -/** - * isr_tr_complete_handler: transaction complete interrupt handler - * @udc: UDC descriptor - * - * This function handles traffic events - */ -static void isr_tr_complete_handler(struct ci13xxx *udc) -__releases(udc->lock) -__acquires(udc->lock) -{ - unsigned i; - u8 tmode = 0; - - trace("%p", udc); - - if (udc == NULL) { - err("EINVAL"); - return; - } - - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; - int type, num, dir, err = -EINVAL; - struct usb_ctrlrequest req; - - if (mEp->desc == NULL) - continue; /* not configured */ - - if (hw_test_and_clear_complete(i)) { - err = isr_tr_complete_low(mEp); - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { - if (err > 0) /* needs status phase */ - err = isr_setup_status_phase(udc); - if (err < 0) { - dbg_event(_usb_addr(mEp), - "ERROR", err); - spin_unlock(udc->lock); - if (usb_ep_set_halt(&mEp->ep)) - err("error: ep_set_halt"); - spin_lock(udc->lock); - } - } - } - - if (mEp->type != USB_ENDPOINT_XFER_CONTROL || - !hw_test_and_clear_setup_status(i)) - continue; - - if (i != 0) { - warn("ctrl traffic received at endpoint"); - continue; - } - - /* - * Flush data and handshake transactions of previous - * setup packet. - */ - _ep_nuke(&udc->ep0out); - _ep_nuke(&udc->ep0in); - - /* read_setup_packet */ - do { - hw_test_and_set_setup_guard(); - memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); - } while (!hw_test_and_clear_setup_guard()); - - type = req.bRequestType; - - udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX; - - dbg_setup(_usb_addr(mEp), &req); - - switch (req.bRequest) { - case USB_REQ_CLEAR_FEATURE: - if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && - le16_to_cpu(req.wValue) == - USB_ENDPOINT_HALT) { - if (req.wLength != 0) - break; - num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; - num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ - num += hw_ep_max/2; - if (!udc->ci13xxx_ep[num].wedge) { - spin_unlock(udc->lock); - err = usb_ep_clear_halt( - &udc->ci13xxx_ep[num].ep); - spin_lock(udc->lock); - if (err) - break; - } - err = isr_setup_status_phase(udc); - } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && - le16_to_cpu(req.wValue) == - USB_DEVICE_REMOTE_WAKEUP) { - if (req.wLength != 0) - break; - udc->remote_wakeup = 0; - err = isr_setup_status_phase(udc); - } else { - goto delegate; - } - break; - case USB_REQ_GET_STATUS: - if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && - type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && - type != (USB_DIR_IN|USB_RECIP_INTERFACE)) - goto delegate; - if (le16_to_cpu(req.wLength) != 2 || - le16_to_cpu(req.wValue) != 0) - break; - err = isr_get_status_response(udc, &req); - break; - case USB_REQ_SET_ADDRESS: - if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) - goto delegate; - if (le16_to_cpu(req.wLength) != 0 || - le16_to_cpu(req.wIndex) != 0) - break; - err = hw_usb_set_address((u8)le16_to_cpu(req.wValue)); - if (err) - break; - err = isr_setup_status_phase(udc); - break; - case USB_REQ_SET_FEATURE: - if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && - le16_to_cpu(req.wValue) == - USB_ENDPOINT_HALT) { - if (req.wLength != 0) - break; - num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; - num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ - num += hw_ep_max/2; - - spin_unlock(udc->lock); - err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); - spin_lock(udc->lock); - if (!err) - isr_setup_status_phase(udc); - } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { - if (req.wLength != 0) - break; - switch (le16_to_cpu(req.wValue)) { - case USB_DEVICE_REMOTE_WAKEUP: - udc->remote_wakeup = 1; - err = isr_setup_status_phase(udc); - break; - case USB_DEVICE_TEST_MODE: - tmode = le16_to_cpu(req.wIndex) >> 8; - switch (tmode) { - case TEST_J: - case TEST_K: - case TEST_SE0_NAK: - case TEST_PACKET: - case TEST_FORCE_EN: - udc->test_mode = tmode; - err = isr_setup_status_phase( - udc); - break; - default: - break; - } - default: - goto delegate; - } - } else { - goto delegate; - } - break; - default: -delegate: - if (req.wLength == 0) /* no data phase */ - udc->ep0_dir = TX; - - spin_unlock(udc->lock); - err = udc->driver->setup(&udc->gadget, &req); - spin_lock(udc->lock); - break; - } - - if (err < 0) { - dbg_event(_usb_addr(mEp), "ERROR", err); - - spin_unlock(udc->lock); - if (usb_ep_set_halt(&mEp->ep)) - err("error: ep_set_halt"); - spin_lock(udc->lock); - } - } -} - -/****************************************************************************** - * ENDPT block - *****************************************************************************/ -/** - * ep_enable: configure endpoint, making it usable - * - * Check usb_ep_enable() at "usb_gadget.h" for details - */ -static int ep_enable(struct usb_ep *ep, - const struct usb_endpoint_descriptor *desc) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - int retval = 0; - unsigned long flags; - - trace("%p, %p", ep, desc); - - if (ep == NULL || desc == NULL) - return -EINVAL; - - spin_lock_irqsave(mEp->lock, flags); - - /* only internal SW should enable ctrl endpts */ - - mEp->desc = desc; - - if (!list_empty(&mEp->qh.queue)) - warn("enabling a non-empty endpoint!"); - - mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; - mEp->num = usb_endpoint_num(desc); - mEp->type = usb_endpoint_type(desc); - - mEp->ep.maxpacket = usb_endpoint_maxp(desc); - - dbg_event(_usb_addr(mEp), "ENABLE", 0); - - mEp->qh.ptr->cap = 0; - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->qh.ptr->cap |= QH_IOS; - else if (mEp->type == USB_ENDPOINT_XFER_ISOC) - mEp->qh.ptr->cap &= ~QH_MULT; - else - mEp->qh.ptr->cap &= ~QH_ZLT; - - mEp->qh.ptr->cap |= - (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; - mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */ - - /* - * Enable endpoints in the HW other than ep0 as ep0 - * is always enabled - */ - if (mEp->num) - retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); - - spin_unlock_irqrestore(mEp->lock, flags); - return retval; -} - -/** - * ep_disable: endpoint is no longer usable - * - * Check usb_ep_disable() at "usb_gadget.h" for details - */ -static int ep_disable(struct usb_ep *ep) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - int direction, retval = 0; - unsigned long flags; - - trace("%p", ep); - - if (ep == NULL) - return -EINVAL; - else if (mEp->desc == NULL) - return -EBUSY; - - spin_lock_irqsave(mEp->lock, flags); - - /* only internal SW should disable ctrl endpts */ - - direction = mEp->dir; - do { - dbg_event(_usb_addr(mEp), "DISABLE", 0); - - retval |= _ep_nuke(mEp); - retval |= hw_ep_disable(mEp->num, mEp->dir); - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; - - } while (mEp->dir != direction); - - mEp->desc = NULL; - mEp->ep.desc = NULL; - - spin_unlock_irqrestore(mEp->lock, flags); - return retval; -} - -/** - * ep_alloc_request: allocate a request object to use with this endpoint - * - * Check usb_ep_alloc_request() at "usb_gadget.h" for details - */ -static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - struct ci13xxx_req *mReq = NULL; - - trace("%p, %i", ep, gfp_flags); - - if (ep == NULL) { - err("EINVAL"); - return NULL; - } - - mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); - if (mReq != NULL) { - INIT_LIST_HEAD(&mReq->queue); - mReq->req.dma = DMA_ADDR_INVALID; - - mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags, - &mReq->dma); - if (mReq->ptr == NULL) { - kfree(mReq); - mReq = NULL; - } - } - - dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL); - - return (mReq == NULL) ? NULL : &mReq->req; -} - -/** - * ep_free_request: frees a request object - * - * Check usb_ep_free_request() at "usb_gadget.h" for details - */ -static void ep_free_request(struct usb_ep *ep, struct usb_request *req) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); - unsigned long flags; - - trace("%p, %p", ep, req); - - if (ep == NULL || req == NULL) { - err("EINVAL"); - return; - } else if (!list_empty(&mReq->queue)) { - err("EBUSY"); - return; - } - - spin_lock_irqsave(mEp->lock, flags); - - if (mReq->ptr) - dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma); - kfree(mReq); - - dbg_event(_usb_addr(mEp), "FREE", 0); - - spin_unlock_irqrestore(mEp->lock, flags); -} - -/** - * ep_queue: queues (submits) an I/O request to an endpoint - * - * Check usb_ep_queue()* at usb_gadget.h" for details - */ -static int ep_queue(struct usb_ep *ep, struct usb_request *req, - gfp_t __maybe_unused gfp_flags) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); - int retval = 0; - unsigned long flags; - - trace("%p, %p, %X", ep, req, gfp_flags); - - if (ep == NULL || req == NULL || mEp->desc == NULL) - return -EINVAL; - - spin_lock_irqsave(mEp->lock, flags); - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { - if (req->length) - mEp = (_udc->ep0_dir == RX) ? - &_udc->ep0out : &_udc->ep0in; - if (!list_empty(&mEp->qh.queue)) { - _ep_nuke(mEp); - retval = -EOVERFLOW; - warn("endpoint ctrl %X nuked", _usb_addr(mEp)); - } - } - - /* first nuke then test link, e.g. previous status has not sent */ - if (!list_empty(&mReq->queue)) { - retval = -EBUSY; - err("request already in queue"); - goto done; - } - - if (req->length > (4 * CI13XXX_PAGE_SIZE)) { - req->length = (4 * CI13XXX_PAGE_SIZE); - retval = -EMSGSIZE; - warn("request length truncated"); - } - - dbg_queue(_usb_addr(mEp), req, retval); - - /* push request */ - mReq->req.status = -EINPROGRESS; - mReq->req.actual = 0; - - retval = _hardware_enqueue(mEp, mReq); - - if (retval == -EALREADY) { - dbg_event(_usb_addr(mEp), "QUEUE", retval); - retval = 0; - } - if (!retval) - list_add_tail(&mReq->queue, &mEp->qh.queue); - - done: - spin_unlock_irqrestore(mEp->lock, flags); - return retval; -} - -/** - * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint - * - * Check usb_ep_dequeue() at "usb_gadget.h" for details - */ -static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); - unsigned long flags; - - trace("%p, %p", ep, req); - - if (ep == NULL || req == NULL || mReq->req.status != -EALREADY || - mEp->desc == NULL || list_empty(&mReq->queue) || - list_empty(&mEp->qh.queue)) - return -EINVAL; - - spin_lock_irqsave(mEp->lock, flags); - - dbg_event(_usb_addr(mEp), "DEQUEUE", 0); - - hw_ep_flush(mEp->num, mEp->dir); - - /* pop request */ - list_del_init(&mReq->queue); - if (mReq->map) { - dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, - mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = DMA_ADDR_INVALID; - mReq->map = 0; - } - req->status = -ECONNRESET; - - if (mReq->req.complete != NULL) { - spin_unlock(mEp->lock); - mReq->req.complete(&mEp->ep, &mReq->req); - spin_lock(mEp->lock); - } - - spin_unlock_irqrestore(mEp->lock, flags); - return 0; -} - -/** - * ep_set_halt: sets the endpoint halt feature - * - * Check usb_ep_set_halt() at "usb_gadget.h" for details - */ -static int ep_set_halt(struct usb_ep *ep, int value) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - int direction, retval = 0; - unsigned long flags; - - trace("%p, %i", ep, value); - - if (ep == NULL || mEp->desc == NULL) - return -EINVAL; - - spin_lock_irqsave(mEp->lock, flags); - -#ifndef STALL_IN - /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ - if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX && - !list_empty(&mEp->qh.queue)) { - spin_unlock_irqrestore(mEp->lock, flags); - return -EAGAIN; - } -#endif - - direction = mEp->dir; - do { - dbg_event(_usb_addr(mEp), "HALT", value); - retval |= hw_ep_set_halt(mEp->num, mEp->dir, value); - - if (!value) - mEp->wedge = 0; - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; - - } while (mEp->dir != direction); - - spin_unlock_irqrestore(mEp->lock, flags); - return retval; -} - -/** - * ep_set_wedge: sets the halt feature and ignores clear requests - * - * Check usb_ep_set_wedge() at "usb_gadget.h" for details - */ -static int ep_set_wedge(struct usb_ep *ep) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - unsigned long flags; - - trace("%p", ep); - - if (ep == NULL || mEp->desc == NULL) - return -EINVAL; - - spin_lock_irqsave(mEp->lock, flags); - - dbg_event(_usb_addr(mEp), "WEDGE", 0); - mEp->wedge = 1; - - spin_unlock_irqrestore(mEp->lock, flags); - - return usb_ep_set_halt(ep); -} - -/** - * ep_fifo_flush: flushes contents of a fifo - * - * Check usb_ep_fifo_flush() at "usb_gadget.h" for details - */ -static void ep_fifo_flush(struct usb_ep *ep) -{ - struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - unsigned long flags; - - trace("%p", ep); - - if (ep == NULL) { - err("%02X: -EINVAL", _usb_addr(mEp)); - return; - } - - spin_lock_irqsave(mEp->lock, flags); - - dbg_event(_usb_addr(mEp), "FFLUSH", 0); - hw_ep_flush(mEp->num, mEp->dir); - - spin_unlock_irqrestore(mEp->lock, flags); -} - -/** - * Endpoint-specific part of the API to the USB controller hardware - * Check "usb_gadget.h" for details - */ -static const struct usb_ep_ops usb_ep_ops = { - .enable = ep_enable, - .disable = ep_disable, - .alloc_request = ep_alloc_request, - .free_request = ep_free_request, - .queue = ep_queue, - .dequeue = ep_dequeue, - .set_halt = ep_set_halt, - .set_wedge = ep_set_wedge, - .fifo_flush = ep_fifo_flush, -}; - -/****************************************************************************** - * GADGET block - *****************************************************************************/ -static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) -{ - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); - unsigned long flags; - int gadget_ready = 0; - - if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS)) - return -EOPNOTSUPP; - - spin_lock_irqsave(udc->lock, flags); - udc->vbus_active = is_active; - if (udc->driver) - gadget_ready = 1; - spin_unlock_irqrestore(udc->lock, flags); - - if (gadget_ready) { - if (is_active) { - pm_runtime_get_sync(&_gadget->dev); - hw_device_reset(udc); - hw_device_state(udc->ep0out.qh.dma); - } else { - hw_device_state(0); - if (udc->udc_driver->notify_event) - udc->udc_driver->notify_event(udc, - CI13XXX_CONTROLLER_STOPPED_EVENT); - _gadget_stop_activity(&udc->gadget); - pm_runtime_put_sync(&_gadget->dev); - } - } - - return 0; -} - -static int ci13xxx_wakeup(struct usb_gadget *_gadget) -{ - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); - unsigned long flags; - int ret = 0; - - trace(); - - spin_lock_irqsave(udc->lock, flags); - if (!udc->remote_wakeup) { - ret = -EOPNOTSUPP; - trace("remote wakeup feature is not enabled\n"); - goto out; - } - if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) { - ret = -EINVAL; - trace("port is not suspended\n"); - goto out; - } - hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR); -out: - spin_unlock_irqrestore(udc->lock, flags); - return ret; -} - -static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) -{ - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); - - if (udc->transceiver) - return usb_phy_set_power(udc->transceiver, mA); - return -ENOTSUPP; -} - -static int ci13xxx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int ci13xxx_stop(struct usb_gadget_driver *driver); -/** - * Device operations part of the API to the USB controller hardware, - * which don't involve endpoints (or i/o) - * Check "usb_gadget.h" for details - */ -static const struct usb_gadget_ops usb_gadget_ops = { - .vbus_session = ci13xxx_vbus_session, - .wakeup = ci13xxx_wakeup, - .vbus_draw = ci13xxx_vbus_draw, - .start = ci13xxx_start, - .stop = ci13xxx_stop, -}; - -/** - * ci13xxx_start: register a gadget driver - * @driver: the driver being registered - * @bind: the driver's bind callback - * - * Check ci13xxx_start() at <linux/usb/gadget.h> for details. - * Interrupts are enabled here. - */ -static int ci13xxx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) -{ - struct ci13xxx *udc = _udc; - unsigned long flags; - int i, j; - int retval = -ENOMEM; - - trace("%p", driver); - - if (driver == NULL || - bind == NULL || - driver->setup == NULL || - driver->disconnect == NULL) - return -EINVAL; - else if (udc == NULL) - return -ENODEV; - else if (udc->driver != NULL) - return -EBUSY; - - /* alloc resources */ - udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev, - sizeof(struct ci13xxx_qh), - 64, CI13XXX_PAGE_SIZE); - if (udc->qh_pool == NULL) - return -ENOMEM; - - udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev, - sizeof(struct ci13xxx_td), - 64, CI13XXX_PAGE_SIZE); - if (udc->td_pool == NULL) { - dma_pool_destroy(udc->qh_pool); - udc->qh_pool = NULL; - return -ENOMEM; - } - - spin_lock_irqsave(udc->lock, flags); - - info("hw_ep_max = %d", hw_ep_max); - - udc->gadget.dev.driver = NULL; - - retval = 0; - for (i = 0; i < hw_ep_max/2; i++) { - for (j = RX; j <= TX; j++) { - int k = i + j * hw_ep_max/2; - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; - - scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, - (j == TX) ? "in" : "out"); - - mEp->lock = udc->lock; - mEp->device = &udc->gadget.dev; - mEp->td_pool = udc->td_pool; - - mEp->ep.name = mEp->name; - mEp->ep.ops = &usb_ep_ops; - mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; - - INIT_LIST_HEAD(&mEp->qh.queue); - spin_unlock_irqrestore(udc->lock, flags); - mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, - &mEp->qh.dma); - spin_lock_irqsave(udc->lock, flags); - if (mEp->qh.ptr == NULL) - retval = -ENOMEM; - else - memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr)); - - /* skip ep0 out and in endpoints */ - if (i == 0) - continue; - - list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); - } - } - if (retval) - goto done; - spin_unlock_irqrestore(udc->lock, flags); - udc->ep0out.ep.desc = &ctrl_endpt_out_desc; - retval = usb_ep_enable(&udc->ep0out.ep); - if (retval) - return retval; - - udc->ep0in.ep.desc = &ctrl_endpt_in_desc; - retval = usb_ep_enable(&udc->ep0in.ep); - if (retval) - return retval; - spin_lock_irqsave(udc->lock, flags); - - udc->gadget.ep0 = &udc->ep0in.ep; - /* bind gadget */ - driver->driver.bus = NULL; - udc->gadget.dev.driver = &driver->driver; - - spin_unlock_irqrestore(udc->lock, flags); - retval = bind(&udc->gadget); /* MAY SLEEP */ - spin_lock_irqsave(udc->lock, flags); - - if (retval) { - udc->gadget.dev.driver = NULL; - goto done; - } - - udc->driver = driver; - pm_runtime_get_sync(&udc->gadget.dev); - if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) { - if (udc->vbus_active) { - if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) - hw_device_reset(udc); - } else { - pm_runtime_put_sync(&udc->gadget.dev); - goto done; - } - } - - retval = hw_device_state(udc->ep0out.qh.dma); - if (retval) - pm_runtime_put_sync(&udc->gadget.dev); - - done: - spin_unlock_irqrestore(udc->lock, flags); - return retval; -} - -/** - * ci13xxx_stop: unregister a gadget driver - * - * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details - */ -static int ci13xxx_stop(struct usb_gadget_driver *driver) -{ - struct ci13xxx *udc = _udc; - unsigned long i, flags; - - trace("%p", driver); - - if (driver == NULL || - driver->unbind == NULL || - driver->setup == NULL || - driver->disconnect == NULL || - driver != udc->driver) - return -EINVAL; - - spin_lock_irqsave(udc->lock, flags); - - if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) || - udc->vbus_active) { - hw_device_state(0); - if (udc->udc_driver->notify_event) - udc->udc_driver->notify_event(udc, - CI13XXX_CONTROLLER_STOPPED_EVENT); - spin_unlock_irqrestore(udc->lock, flags); - _gadget_stop_activity(&udc->gadget); - spin_lock_irqsave(udc->lock, flags); - pm_runtime_put(&udc->gadget.dev); - } - - /* unbind gadget */ - spin_unlock_irqrestore(udc->lock, flags); - driver->unbind(&udc->gadget); /* MAY SLEEP */ - spin_lock_irqsave(udc->lock, flags); - - udc->gadget.dev.driver = NULL; - - /* free resources */ - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; - - if (!list_empty(&mEp->ep.ep_list)) - list_del_init(&mEp->ep.ep_list); - - if (mEp->qh.ptr != NULL) - dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); - } - - udc->gadget.ep0 = NULL; - udc->driver = NULL; - - spin_unlock_irqrestore(udc->lock, flags); - - if (udc->td_pool != NULL) { - dma_pool_destroy(udc->td_pool); - udc->td_pool = NULL; - } - if (udc->qh_pool != NULL) { - dma_pool_destroy(udc->qh_pool); - udc->qh_pool = NULL; - } - - return 0; -} - -/****************************************************************************** - * BUS block - *****************************************************************************/ -/** - * udc_irq: global interrupt handler - * - * This function returns IRQ_HANDLED if the IRQ has been handled - * It locks access to registers - */ -static irqreturn_t udc_irq(void) -{ - struct ci13xxx *udc = _udc; - irqreturn_t retval; - u32 intr; - - trace(); - - if (udc == NULL) { - err("ENODEV"); - return IRQ_HANDLED; - } - - spin_lock(udc->lock); - - if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) { - if (hw_cread(CAP_USBMODE, USBMODE_CM) != - USBMODE_CM_DEVICE) { - spin_unlock(udc->lock); - return IRQ_NONE; - } - } - intr = hw_test_and_clear_intr_active(); - if (intr) { - isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr; - isr_statistics.hndl.idx &= ISR_MASK; - isr_statistics.hndl.cnt++; - - /* order defines priority - do NOT change it */ - if (USBi_URI & intr) { - isr_statistics.uri++; - isr_reset_handler(udc); - } - if (USBi_PCI & intr) { - isr_statistics.pci++; - udc->gadget.speed = hw_port_is_high_speed() ? - USB_SPEED_HIGH : USB_SPEED_FULL; - if (udc->suspended && udc->driver->resume) { - spin_unlock(udc->lock); - udc->driver->resume(&udc->gadget); - spin_lock(udc->lock); - udc->suspended = 0; - } - } - if (USBi_UEI & intr) - isr_statistics.uei++; - if (USBi_UI & intr) { - isr_statistics.ui++; - isr_tr_complete_handler(udc); - } - if (USBi_SLI & intr) { - if (udc->gadget.speed != USB_SPEED_UNKNOWN && - udc->driver->suspend) { - udc->suspended = 1; - spin_unlock(udc->lock); - udc->driver->suspend(&udc->gadget); - spin_lock(udc->lock); - } - isr_statistics.sli++; - } - retval = IRQ_HANDLED; - } else { - isr_statistics.none++; - retval = IRQ_NONE; - } - spin_unlock(udc->lock); - - return retval; -} - -/** - * udc_release: driver release function - * @dev: device - * - * Currently does nothing - */ -static void udc_release(struct device *dev) -{ - trace("%p", dev); - - if (dev == NULL) - err("EINVAL"); -} - -/** - * udc_probe: parent probe must call this to initialize UDC - * @dev: parent device - * @regs: registers base address - * @name: driver name - * - * This function returns an error code - * No interrupts active, the IRQ has not been requested yet - * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask - */ -static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, - void __iomem *regs) -{ - struct ci13xxx *udc; - int retval = 0; - - trace("%p, %p, %p", dev, regs, driver->name); - - if (dev == NULL || regs == NULL || driver == NULL || - driver->name == NULL) - return -EINVAL; - - udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL); - if (udc == NULL) - return -ENOMEM; - - udc->lock = &udc_lock; - udc->regs = regs; - udc->udc_driver = driver; - - udc->gadget.ops = &usb_gadget_ops; - udc->gadget.speed = USB_SPEED_UNKNOWN; - udc->gadget.max_speed = USB_SPEED_HIGH; - udc->gadget.is_otg = 0; - udc->gadget.name = driver->name; - - INIT_LIST_HEAD(&udc->gadget.ep_list); - udc->gadget.ep0 = NULL; - - dev_set_name(&udc->gadget.dev, "gadget"); - udc->gadget.dev.dma_mask = dev->dma_mask; - udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; - udc->gadget.dev.parent = dev; - udc->gadget.dev.release = udc_release; - - retval = hw_device_init(regs); - if (retval < 0) - goto free_udc; - - udc->transceiver = usb_get_transceiver(); - - if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) { - if (udc->transceiver == NULL) { - retval = -ENODEV; - goto free_udc; - } - } - - if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) { - retval = hw_device_reset(udc); - if (retval) - goto put_transceiver; - } - - retval = device_register(&udc->gadget.dev); - if (retval) { - put_device(&udc->gadget.dev); - goto put_transceiver; - } - -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - retval = dbg_create_files(&udc->gadget.dev); -#endif - if (retval) - goto unreg_device; - - if (udc->transceiver) { - retval = otg_set_peripheral(udc->transceiver->otg, - &udc->gadget); - if (retval) - goto remove_dbg; - } - - retval = usb_add_gadget_udc(dev, &udc->gadget); - if (retval) - goto remove_trans; - - pm_runtime_no_callbacks(&udc->gadget.dev); - pm_runtime_enable(&udc->gadget.dev); - - _udc = udc; - return retval; - -remove_trans: - if (udc->transceiver) { - otg_set_peripheral(udc->transceiver->otg, &udc->gadget); - usb_put_transceiver(udc->transceiver); - } - - err("error = %i", retval); -remove_dbg: -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - dbg_remove_files(&udc->gadget.dev); -#endif -unreg_device: - device_unregister(&udc->gadget.dev); -put_transceiver: - if (udc->transceiver) - usb_put_transceiver(udc->transceiver); -free_udc: - kfree(udc); - _udc = NULL; - return retval; -} - -/** - * udc_remove: parent remove must call this to remove UDC - * - * No interrupts active, the IRQ has been released - */ -static void udc_remove(void) -{ - struct ci13xxx *udc = _udc; - - if (udc == NULL) { - err("EINVAL"); - return; - } - usb_del_gadget_udc(&udc->gadget); - - if (udc->transceiver) { - otg_set_peripheral(udc->transceiver->otg, &udc->gadget); - usb_put_transceiver(udc->transceiver); - } -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - dbg_remove_files(&udc->gadget.dev); -#endif - device_unregister(&udc->gadget.dev); - - kfree(udc); - _udc = NULL; -} diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h deleted file mode 100644 index 0d31af56c989..000000000000 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ /dev/null @@ -1,227 +0,0 @@ -/* - * ci13xxx_udc.h - structures, registers, and macros MIPS USB IP core - * - * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. - * - * Author: David Lopo - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Description: MIPS USB IP core family device controller - * Structures, registers and logging macros - */ - -#ifndef _CI13XXX_h_ -#define _CI13XXX_h_ - -/****************************************************************************** - * DEFINE - *****************************************************************************/ -#define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */ -#define ENDPT_MAX (32) -#define CTRL_PAYLOAD_MAX (64) -#define RX (0) /* similar to USB_DIR_OUT but can be used as an index */ -#define TX (1) /* similar to USB_DIR_IN but can be used as an index */ - -/****************************************************************************** - * STRUCTURES - *****************************************************************************/ -/* DMA layout of transfer descriptors */ -struct ci13xxx_td { - /* 0 */ - u32 next; -#define TD_TERMINATE BIT(0) -#define TD_ADDR_MASK (0xFFFFFFEUL << 5) - /* 1 */ - u32 token; -#define TD_STATUS (0x00FFUL << 0) -#define TD_STATUS_TR_ERR BIT(3) -#define TD_STATUS_DT_ERR BIT(5) -#define TD_STATUS_HALTED BIT(6) -#define TD_STATUS_ACTIVE BIT(7) -#define TD_MULTO (0x0003UL << 10) -#define TD_IOC BIT(15) -#define TD_TOTAL_BYTES (0x7FFFUL << 16) - /* 2 */ - u32 page[5]; -#define TD_CURR_OFFSET (0x0FFFUL << 0) -#define TD_FRAME_NUM (0x07FFUL << 0) -#define TD_RESERVED_MASK (0x0FFFUL << 0) -} __attribute__ ((packed)); - -/* DMA layout of queue heads */ -struct ci13xxx_qh { - /* 0 */ - u32 cap; -#define QH_IOS BIT(15) -#define QH_MAX_PKT (0x07FFUL << 16) -#define QH_ZLT BIT(29) -#define QH_MULT (0x0003UL << 30) - /* 1 */ - u32 curr; - /* 2 - 8 */ - struct ci13xxx_td td; - /* 9 */ - u32 RESERVED; - struct usb_ctrlrequest setup; -} __attribute__ ((packed)); - -/* Extension of usb_request */ -struct ci13xxx_req { - struct usb_request req; - unsigned map; - struct list_head queue; - struct ci13xxx_td *ptr; - dma_addr_t dma; - struct ci13xxx_td *zptr; - dma_addr_t zdma; -}; - -/* Extension of usb_ep */ -struct ci13xxx_ep { - struct usb_ep ep; - const struct usb_endpoint_descriptor *desc; - u8 dir; - u8 num; - u8 type; - char name[16]; - struct { - struct list_head queue; - struct ci13xxx_qh *ptr; - dma_addr_t dma; - } qh; - int wedge; - - /* global resources */ - spinlock_t *lock; - struct device *device; - struct dma_pool *td_pool; -}; - -struct ci13xxx; -struct ci13xxx_udc_driver { - const char *name; - unsigned long flags; -#define CI13XXX_REGS_SHARED BIT(0) -#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) -#define CI13XXX_PULLUP_ON_VBUS BIT(2) -#define CI13XXX_DISABLE_STREAMING BIT(3) - -#define CI13XXX_CONTROLLER_RESET_EVENT 0 -#define CI13XXX_CONTROLLER_STOPPED_EVENT 1 - void (*notify_event) (struct ci13xxx *udc, unsigned event); -}; - -/* CI13XXX UDC descriptor & global resources */ -struct ci13xxx { - spinlock_t *lock; /* ctrl register bank access */ - void __iomem *regs; /* registers address space */ - - struct dma_pool *qh_pool; /* DMA pool for queue heads */ - struct dma_pool *td_pool; /* DMA pool for transfer descs */ - struct usb_request *status; /* ep0 status request */ - - struct usb_gadget gadget; /* USB slave device */ - struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ - u32 ep0_dir; /* ep0 direction */ -#define ep0out ci13xxx_ep[0] -#define ep0in ci13xxx_ep[hw_ep_max / 2] - u8 remote_wakeup; /* Is remote wakeup feature - enabled by the host? */ - u8 suspended; /* suspended by the host */ - u8 test_mode; /* the selected test mode */ - - struct usb_gadget_driver *driver; /* 3rd party gadget driver */ - struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ - int vbus_active; /* is VBUS active */ - struct usb_phy *transceiver; /* Transceiver struct */ -}; - -/****************************************************************************** - * REGISTERS - *****************************************************************************/ -/* register size */ -#define REG_BITS (32) - -/* HCCPARAMS */ -#define HCCPARAMS_LEN BIT(17) - -/* DCCPARAMS */ -#define DCCPARAMS_DEN (0x1F << 0) -#define DCCPARAMS_DC BIT(7) - -/* TESTMODE */ -#define TESTMODE_FORCE BIT(0) - -/* USBCMD */ -#define USBCMD_RS BIT(0) -#define USBCMD_RST BIT(1) -#define USBCMD_SUTW BIT(13) -#define USBCMD_ATDTW BIT(14) - -/* USBSTS & USBINTR */ -#define USBi_UI BIT(0) -#define USBi_UEI BIT(1) -#define USBi_PCI BIT(2) -#define USBi_URI BIT(6) -#define USBi_SLI BIT(8) - -/* DEVICEADDR */ -#define DEVICEADDR_USBADRA BIT(24) -#define DEVICEADDR_USBADR (0x7FUL << 25) - -/* PORTSC */ -#define PORTSC_FPR BIT(6) -#define PORTSC_SUSP BIT(7) -#define PORTSC_HSP BIT(9) -#define PORTSC_PTC (0x0FUL << 16) - -/* DEVLC */ -#define DEVLC_PSPD (0x03UL << 25) -#define DEVLC_PSPD_HS (0x02UL << 25) - -/* USBMODE */ -#define USBMODE_CM (0x03UL << 0) -#define USBMODE_CM_IDLE (0x00UL << 0) -#define USBMODE_CM_DEVICE (0x02UL << 0) -#define USBMODE_CM_HOST (0x03UL << 0) -#define USBMODE_SLOM BIT(3) -#define USBMODE_SDIS BIT(4) - -/* ENDPTCTRL */ -#define ENDPTCTRL_RXS BIT(0) -#define ENDPTCTRL_RXT (0x03UL << 2) -#define ENDPTCTRL_RXR BIT(6) /* reserved for port 0 */ -#define ENDPTCTRL_RXE BIT(7) -#define ENDPTCTRL_TXS BIT(16) -#define ENDPTCTRL_TXT (0x03UL << 18) -#define ENDPTCTRL_TXR BIT(22) /* reserved for port 0 */ -#define ENDPTCTRL_TXE BIT(23) - -/****************************************************************************** - * LOGGING - *****************************************************************************/ -#define ci13xxx_printk(level, format, args...) \ -do { \ - if (_udc == NULL) \ - printk(level "[%s] " format "\n", __func__, ## args); \ - else \ - dev_printk(level, _udc->gadget.dev.parent, \ - "[%s] " format "\n", __func__, ## args); \ -} while (0) - -#define err(format, args...) ci13xxx_printk(KERN_ERR, format, ## args) -#define warn(format, args...) ci13xxx_printk(KERN_WARNING, format, ## args) -#define info(format, args...) ci13xxx_printk(KERN_INFO, format, ## args) - -#ifdef TRACE -#define trace(format, args...) ci13xxx_printk(KERN_DEBUG, format, ## args) -#define dbg_trace(format, args...) dev_dbg(dev, format, ##args) -#else -#define trace(format, args...) do {} while (0) -#define dbg_trace(format, args...) do {} while (0) -#endif - -#endif /* _CI13XXX_h_ */ diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index baaebf2830fc..390749bbb0c3 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -40,27 +40,27 @@ static int (*composite_gadget_bind)(struct usb_composite_dev *cdev); */ static ushort idVendor; -module_param(idVendor, ushort, 0); +module_param(idVendor, ushort, 0644); MODULE_PARM_DESC(idVendor, "USB Vendor ID"); static ushort idProduct; -module_param(idProduct, ushort, 0); +module_param(idProduct, ushort, 0644); MODULE_PARM_DESC(idProduct, "USB Product ID"); static ushort bcdDevice; -module_param(bcdDevice, ushort, 0); +module_param(bcdDevice, ushort, 0644); MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); static char *iManufacturer; -module_param(iManufacturer, charp, 0); +module_param(iManufacturer, charp, 0644); MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); static char *iProduct; -module_param(iProduct, charp, 0); +module_param(iProduct, charp, 0644); MODULE_PARM_DESC(iProduct, "USB Product string"); static char *iSerialNumber; -module_param(iSerialNumber, charp, 0); +module_param(iSerialNumber, charp, 0644); MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); static char composite_manufacturer[50]; @@ -734,9 +734,23 @@ int usb_add_config(struct usb_composite_dev *cdev, INIT_LIST_HEAD(&config->functions); config->next_interface_id = 0; + memset(config->interface, 0, sizeof(config->interface)); status = bind(config); if (status < 0) { + while (!list_empty(&config->functions)) { + struct usb_function *f; + + f = list_first_entry(&config->functions, + struct usb_function, list); + list_del(&f->list); + if (f->unbind) { + DBG(cdev, "unbind function '%s'/%p\n", + f->name, f); + f->unbind(config, f); + /* may free memory for "f" */ + } + } list_del(&config->list); config->cdev = NULL; } else { @@ -774,6 +788,53 @@ done: return status; } +static void remove_config(struct usb_composite_dev *cdev, + struct usb_configuration *config) +{ + while (!list_empty(&config->functions)) { + struct usb_function *f; + + f = list_first_entry(&config->functions, + struct usb_function, list); + list_del(&f->list); + if (f->unbind) { + DBG(cdev, "unbind function '%s'/%p\n", f->name, f); + f->unbind(config, f); + /* may free memory for "f" */ + } + } + list_del(&config->list); + if (config->unbind) { + DBG(cdev, "unbind config '%s'/%p\n", config->label, config); + config->unbind(config); + /* may free memory for "c" */ + } +} + +/** + * usb_remove_config() - remove a configuration from a device. + * @cdev: wraps the USB gadget + * @config: the configuration + * + * Drivers must call usb_gadget_disconnect before calling this function + * to disconnect the device from the host and make sure the host will not + * try to enumerate the device while we are changing the config list. + */ +void usb_remove_config(struct usb_composite_dev *cdev, + struct usb_configuration *config) +{ + unsigned long flags; + + spin_lock_irqsave(&cdev->lock, flags); + + if (cdev->config == config) + reset_config(cdev); + + spin_unlock_irqrestore(&cdev->lock, flags); + + remove_config(cdev, config); +} + /*-------------------------------------------------------------------------*/ /* We support strings in multiple languages ... string descriptor zero @@ -785,7 +846,7 @@ done: static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf) { const struct usb_gadget_strings *s; - u16 language; + __le16 language; __le16 *tmp; while (*sp) { @@ -877,7 +938,7 @@ static int get_string(struct usb_composite_dev *cdev, else if (cdev->product_override == id) str = iProduct ?: composite->iProduct; else if (cdev->serial_override == id) - str = iSerialNumber; + str = iSerialNumber ?: composite->iSerialNumber; else str = NULL; if (str) { @@ -1328,28 +1389,9 @@ composite_unbind(struct usb_gadget *gadget) while (!list_empty(&cdev->configs)) { struct usb_configuration *c; - c = list_first_entry(&cdev->configs, struct usb_configuration, list); - while (!list_empty(&c->functions)) { - struct usb_function *f; - - f = list_first_entry(&c->functions, - struct usb_function, list); - list_del(&f->list); - if (f->unbind) { - DBG(cdev, "unbind function '%s'/%p\n", - f->name, f); - f->unbind(c, f); - /* may free memory for "f" */ - } - } - list_del(&c->list); - if (c->unbind) { - DBG(cdev, "unbind config '%s'/%p\n", c->label, c); - c->unbind(c); - /* may free memory for "c" */ - } + remove_config(cdev, c); } if (composite->unbind) composite->unbind(cdev); @@ -1431,10 +1473,16 @@ static int composite_bind(struct usb_gadget *gadget) /* standardized runtime overrides for device ID data */ if (idVendor) cdev->desc.idVendor = cpu_to_le16(idVendor); + else + idVendor = le16_to_cpu(cdev->desc.idVendor); if (idProduct) cdev->desc.idProduct = cpu_to_le16(idProduct); + else + idProduct = le16_to_cpu(cdev->desc.idProduct); if (bcdDevice) cdev->desc.bcdDevice = cpu_to_le16(bcdDevice); + else + bcdDevice = le16_to_cpu(cdev->desc.bcdDevice); /* string overrides */ if (iManufacturer || !cdev->desc.iManufacturer) { @@ -1455,7 +1503,8 @@ static int composite_bind(struct usb_gadget *gadget) cdev->product_override = override_id(cdev, &cdev->desc.iProduct); - if (iSerialNumber) + if (iSerialNumber || + (!cdev->desc.iSerialNumber && composite->iSerialNumber)) cdev->serial_override = override_id(cdev, &cdev->desc.iSerialNumber); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a6dfd2164166..b799106027ad 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -595,14 +595,12 @@ static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req) { - struct dummy_ep *ep; struct dummy_request *req; - if (!_ep || !_req) - return; - ep = usb_ep_to_dummy_ep(_ep); - if (!ep->desc && _ep->name != ep0name) + if (!_ep || !_req) { + WARN_ON(1); return; + } req = usb_request_to_dummy_request(_req); WARN_ON(!list_empty(&req->queue)); @@ -927,7 +925,6 @@ static int dummy_udc_stop(struct usb_gadget *g, dum->driver = NULL; - dummy_pullup(&dum->gadget, 0); return 0; } diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index f52cb1ae45d9..dcd1c7fbb016 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1031,6 +1031,12 @@ struct ffs_sb_fill_data { struct ffs_file_perms perms; umode_t root_mode; const char *dev_name; + union { + /* set by ffs_fs_mount(), read by ffs_sb_fill() */ + void *private_data; + /* set by ffs_sb_fill(), read by ffs_fs_mount */ + struct ffs_data *ffs_data; + }; }; static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) @@ -1047,8 +1053,14 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) goto Enomem; ffs->sb = sb; - ffs->dev_name = data->dev_name; + ffs->dev_name = kstrdup(data->dev_name, GFP_KERNEL); + if (unlikely(!ffs->dev_name)) + goto Enomem; ffs->file_perms = data->perms; + ffs->private_data = data->private_data; + + /* used by the caller of this function */ + data->ffs_data = ffs; sb->s_fs_info = ffs; sb->s_blocksize = PAGE_CACHE_SIZE; @@ -1167,20 +1179,29 @@ ffs_fs_mount(struct file_system_type *t, int flags, }, .root_mode = S_IFDIR | 0500, }; + struct dentry *rv; int ret; + void *ffs_dev; ENTER(); - ret = functionfs_check_dev_callback(dev_name); - if (unlikely(ret < 0)) - return ERR_PTR(ret); - ret = ffs_fs_parse_opts(&data, opts); if (unlikely(ret < 0)) return ERR_PTR(ret); + ffs_dev = functionfs_acquire_dev_callback(dev_name); + if (IS_ERR(ffs_dev)) + return ffs_dev; + data.dev_name = dev_name; - return mount_single(t, flags, &data, ffs_sb_fill); + data.private_data = ffs_dev; + rv = mount_nodev(t, flags, &data, ffs_sb_fill); + + /* data.ffs_data is set by ffs_sb_fill */ + if (IS_ERR(rv)) + functionfs_release_dev_callback(data.ffs_data); + + return rv; } static void @@ -1189,8 +1210,10 @@ ffs_fs_kill_sb(struct super_block *sb) ENTER(); kill_litter_super(sb); - if (sb->s_fs_info) + if (sb->s_fs_info) { + functionfs_release_dev_callback(sb->s_fs_info); ffs_data_put(sb->s_fs_info); + } } static struct file_system_type ffs_fs_type = { @@ -1256,6 +1279,7 @@ static void ffs_data_put(struct ffs_data *ffs) ffs_data_clear(ffs); BUG_ON(waitqueue_active(&ffs->ev.waitq) || waitqueue_active(&ffs->ep0req_completion.wait)); + kfree(ffs->dev_name); kfree(ffs); } } @@ -1473,8 +1497,22 @@ static int functionfs_bind_config(struct usb_composite_dev *cdev, static void ffs_func_free(struct ffs_function *func) { + struct ffs_ep *ep = func->eps; + unsigned count = func->ffs->eps_count; + unsigned long flags; + ENTER(); + /* cleanup after autoconfig */ + spin_lock_irqsave(&func->ffs->eps_lock, flags); + do { + if (ep->ep && ep->req) + usb_ep_free_request(ep->ep, ep->req); + ep->req = NULL; + ++ep; + } while (--count); + spin_unlock_irqrestore(&func->ffs->eps_lock, flags); + ffs_data_put(func->ffs); kfree(func->eps); diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index b2113420b806..3b3932c55361 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -374,7 +374,7 @@ static int hidg_setup(struct usb_function *f, break; default: - VDBG(cdev, "Unknown decriptor request 0x%x\n", + VDBG(cdev, "Unknown descriptor request 0x%x\n", value >> 8); goto stall; break; diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index 2c0cd824c667..7275706caeb0 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -286,7 +286,7 @@ static void disable_loopback(struct f_loopback *loop) struct usb_composite_dev *cdev; cdev = loop->function.config->cdev; - disable_endpoints(cdev, loop->in_ep, loop->out_ep); + disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL); VDBG(cdev, "%s disabled\n", loop->function.name); } @@ -329,7 +329,7 @@ fail0: * than 'buflen' bytes each. */ for (i = 0; i < qlen && result == 0; i++) { - req = alloc_ep_req(ep); + req = alloc_ep_req(ep, 0); if (req) { req->complete = loopback_complete; result = usb_ep_queue(ep, req, GFP_ATOMIC); diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a371e966425f..f67b453740bd 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2189,7 +2189,7 @@ unknown_cmnd: common->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", common->cmnd[0]); reply = check_command(common, common->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown); + DATA_DIR_UNKNOWN, ~0, 0, unknown); if (reply == 0) { common->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; @@ -3110,13 +3110,6 @@ static int fsg_bind_config(struct usb_composite_dev *cdev, return rc; } -static inline int __deprecated __maybe_unused -fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c, - struct fsg_common *common) -{ - return fsg_bind_config(cdev, c, common); -} - /************************* Module parameters *************************/ diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 52343654f5df..b1681e45aca7 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -71,6 +71,8 @@ struct f_rndis { struct gether port; u8 ctrl_id, data_id; u8 ethaddr[ETH_ALEN]; + u32 vendorID; + const char *manufacturer; int config; struct usb_ep *notify; @@ -637,7 +639,7 @@ static void rndis_open(struct gether *geth) DBG(cdev, "%s\n", __func__); - rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, + rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, bitrate(cdev->gadget) / 100); rndis_signal_connect(rndis->config); } @@ -648,7 +650,7 @@ static void rndis_close(struct gether *geth) DBG(geth->func.config->cdev, "%s\n", __func__); - rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, 0); + rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); rndis_signal_disconnect(rndis->config); } @@ -765,15 +767,13 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) goto fail; rndis->config = status; - rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, 0); + rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0); rndis_set_host_mac(rndis->config, rndis->ethaddr); -#if 0 -// FIXME - if (rndis_set_param_vendor(rndis->config, vendorID, - manufacturer)) - goto fail0; -#endif + if (rndis->manufacturer && rndis->vendorID && + rndis_set_param_vendor(rndis->config, rndis->vendorID, + rndis->manufacturer)) + goto fail; /* NOTE: all that is done without knowing or caring about * the network link ... which is unavailable to this code @@ -820,6 +820,7 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f) rndis_deregister(rndis->config); rndis_exit(); + rndis_string_defs[0].id = 0; if (gadget_is_superspeed(c->cdev->gadget)) usb_free_descriptors(f->ss_descriptors); @@ -840,20 +841,9 @@ static inline bool can_support_rndis(struct usb_configuration *c) return true; } -/** - * rndis_bind_config - add RNDIS network link to a configuration - * @c: the configuration to support the network link - * @ethaddr: a buffer in which the ethernet address of the host side - * side of the link was recorded - * Context: single threaded during gadget setup - * - * Returns zero on success, else negative errno. - * - * Caller must have called @gether_setup(). Caller is also responsible - * for calling @gether_cleanup() before module unload. - */ int -rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) +rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + u32 vendorID, const char *manufacturer) { struct f_rndis *rndis; int status; @@ -898,6 +888,8 @@ rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) goto fail; memcpy(rndis->ethaddr, ethaddr, ETH_ALEN); + rndis->vendorID = vendorID; + rndis->manufacturer = manufacturer; /* RNDIS activates when the host changes this filter */ rndis->port.cdc_filter = 0; diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 7aa7ac82c02c..5c1b68b63c98 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -51,6 +51,9 @@ struct f_sourcesink { struct usb_ep *in_ep; struct usb_ep *out_ep; + struct usb_ep *iso_in_ep; + struct usb_ep *iso_out_ep; + int cur_alt; }; static inline struct f_sourcesink *func_to_ss(struct usb_function *f) @@ -59,18 +62,45 @@ static inline struct f_sourcesink *func_to_ss(struct usb_function *f) } static unsigned pattern; -module_param(pattern, uint, 0); -MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 "); +module_param(pattern, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none"); + +static unsigned isoc_interval = 4; +module_param(isoc_interval, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_interval, "1 - 16"); + +static unsigned isoc_maxpacket = 1024; +module_param(isoc_maxpacket, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)"); + +static unsigned isoc_mult; +module_param(isoc_mult, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)"); + +static unsigned isoc_maxburst; +module_param(isoc_maxburst, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)"); /*-------------------------------------------------------------------------*/ -static struct usb_interface_descriptor source_sink_intf = { - .bLength = sizeof source_sink_intf, +static struct usb_interface_descriptor source_sink_intf_alt0 = { + .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, + .bAlternateSetting = 0, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - /* .iInterface = DYNAMIC */ + /* .iInterface = DYNAMIC */ +}; + +static struct usb_interface_descriptor source_sink_intf_alt1 = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + + .bAlternateSetting = 1, + .bNumEndpoints = 4, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + /* .iInterface = DYNAMIC */ }; /* full speed support: */ @@ -91,10 +121,36 @@ static struct usb_endpoint_descriptor fs_sink_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, }; +static struct usb_endpoint_descriptor fs_iso_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1023), + .bInterval = 4, +}; + +static struct usb_endpoint_descriptor fs_iso_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1023), + .bInterval = 4, +}; + static struct usb_descriptor_header *fs_source_sink_descs[] = { - (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &source_sink_intf_alt0, (struct usb_descriptor_header *) &fs_sink_desc, (struct usb_descriptor_header *) &fs_source_desc, + (struct usb_descriptor_header *) &source_sink_intf_alt1, +#define FS_ALT_IFC_1_OFFSET 3 + (struct usb_descriptor_header *) &fs_sink_desc, + (struct usb_descriptor_header *) &fs_source_desc, + (struct usb_descriptor_header *) &fs_iso_sink_desc, + (struct usb_descriptor_header *) &fs_iso_source_desc, NULL, }; @@ -116,10 +172,34 @@ static struct usb_endpoint_descriptor hs_sink_desc = { .wMaxPacketSize = cpu_to_le16(512), }; +static struct usb_endpoint_descriptor hs_iso_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + +static struct usb_endpoint_descriptor hs_iso_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + static struct usb_descriptor_header *hs_source_sink_descs[] = { - (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &source_sink_intf_alt0, (struct usb_descriptor_header *) &hs_source_desc, (struct usb_descriptor_header *) &hs_sink_desc, + (struct usb_descriptor_header *) &source_sink_intf_alt1, +#define HS_ALT_IFC_1_OFFSET 3 + (struct usb_descriptor_header *) &hs_source_desc, + (struct usb_descriptor_header *) &hs_sink_desc, + (struct usb_descriptor_header *) &hs_iso_source_desc, + (struct usb_descriptor_header *) &hs_iso_sink_desc, NULL, }; @@ -136,6 +216,7 @@ static struct usb_endpoint_descriptor ss_source_desc = { struct usb_ss_ep_comp_descriptor ss_source_comp_desc = { .bLength = USB_DT_SS_EP_COMP_SIZE, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, .bmAttributes = 0, .wBytesPerInterval = 0, @@ -152,17 +233,64 @@ static struct usb_endpoint_descriptor ss_sink_desc = { struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = { .bLength = USB_DT_SS_EP_COMP_SIZE, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, .bmAttributes = 0, .wBytesPerInterval = 0, }; +static struct usb_endpoint_descriptor ss_iso_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + +struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = { + .bLength = USB_DT_SS_EP_COMP_SIZE, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(1024), +}; + +static struct usb_endpoint_descriptor ss_iso_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + +struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = { + .bLength = USB_DT_SS_EP_COMP_SIZE, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(1024), +}; + static struct usb_descriptor_header *ss_source_sink_descs[] = { - (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &source_sink_intf_alt0, (struct usb_descriptor_header *) &ss_source_desc, (struct usb_descriptor_header *) &ss_source_comp_desc, (struct usb_descriptor_header *) &ss_sink_desc, (struct usb_descriptor_header *) &ss_sink_comp_desc, + (struct usb_descriptor_header *) &source_sink_intf_alt1, +#define SS_ALT_IFC_1_OFFSET 5 + (struct usb_descriptor_header *) &ss_source_desc, + (struct usb_descriptor_header *) &ss_source_comp_desc, + (struct usb_descriptor_header *) &ss_sink_desc, + (struct usb_descriptor_header *) &ss_sink_comp_desc, + (struct usb_descriptor_header *) &ss_iso_source_desc, + (struct usb_descriptor_header *) &ss_iso_source_comp_desc, + (struct usb_descriptor_header *) &ss_iso_sink_desc, + (struct usb_descriptor_header *) &ss_iso_sink_comp_desc, NULL, }; @@ -196,9 +324,10 @@ sourcesink_bind(struct usb_configuration *c, struct usb_function *f) id = usb_interface_id(c, f); if (id < 0) return id; - source_sink_intf.bInterfaceNumber = id; + source_sink_intf_alt0.bInterfaceNumber = id; + source_sink_intf_alt1.bInterfaceNumber = id; - /* allocate endpoints */ + /* allocate bulk endpoints */ ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc); if (!ss->in_ep) { autoconf_fail: @@ -213,12 +342,74 @@ autoconf_fail: goto autoconf_fail; ss->out_ep->driver_data = cdev; /* claim */ + /* sanity check the isoc module parameters */ + if (isoc_interval < 1) + isoc_interval = 1; + if (isoc_interval > 16) + isoc_interval = 16; + if (isoc_mult > 2) + isoc_mult = 2; + if (isoc_maxburst > 15) + isoc_maxburst = 15; + + /* fill in the FS isoc descriptors from the module parameters */ + fs_iso_source_desc.wMaxPacketSize = isoc_maxpacket > 1023 ? + 1023 : isoc_maxpacket; + fs_iso_source_desc.bInterval = isoc_interval; + fs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket > 1023 ? + 1023 : isoc_maxpacket; + fs_iso_sink_desc.bInterval = isoc_interval; + + /* allocate iso endpoints */ + ss->iso_in_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_source_desc); + if (!ss->iso_in_ep) + goto no_iso; + ss->iso_in_ep->driver_data = cdev; /* claim */ + + ss->iso_out_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_sink_desc); + if (ss->iso_out_ep) { + ss->iso_out_ep->driver_data = cdev; /* claim */ + } else { + ss->iso_in_ep->driver_data = NULL; + ss->iso_in_ep = NULL; +no_iso: + /* + * We still want to work even if the UDC doesn't have isoc + * endpoints, so null out the alt interface that contains + * them and continue. + */ + fs_source_sink_descs[FS_ALT_IFC_1_OFFSET] = NULL; + hs_source_sink_descs[HS_ALT_IFC_1_OFFSET] = NULL; + ss_source_sink_descs[SS_ALT_IFC_1_OFFSET] = NULL; + } + + if (isoc_maxpacket > 1024) + isoc_maxpacket = 1024; + /* support high speed hardware */ if (gadget_is_dualspeed(c->cdev->gadget)) { hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; + + /* + * Fill in the HS isoc descriptors from the module parameters. + * We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket; + hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11; + hs_iso_source_desc.bInterval = isoc_interval; + hs_iso_source_desc.bEndpointAddress = + fs_iso_source_desc.bEndpointAddress; + + hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; + hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11; + hs_iso_sink_desc.bInterval = isoc_interval; + hs_iso_sink_desc.bEndpointAddress = + fs_iso_sink_desc.bEndpointAddress; + f->hs_descriptors = hs_source_sink_descs; } @@ -228,13 +419,39 @@ autoconf_fail: fs_source_desc.bEndpointAddress; ss_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; + + /* + * Fill in the SS isoc descriptors from the module parameters. + * We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket; + ss_iso_source_desc.bInterval = isoc_interval; + ss_iso_source_comp_desc.bmAttributes = isoc_mult; + ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst; + ss_iso_source_comp_desc.wBytesPerInterval = + isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); + ss_iso_source_desc.bEndpointAddress = + fs_iso_source_desc.bEndpointAddress; + + ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; + ss_iso_sink_desc.bInterval = isoc_interval; + ss_iso_sink_comp_desc.bmAttributes = isoc_mult; + ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst; + ss_iso_sink_comp_desc.wBytesPerInterval = + isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); + ss_iso_sink_desc.bEndpointAddress = + fs_iso_sink_desc.bEndpointAddress; + f->ss_descriptors = ss_source_sink_descs; } - DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n", + DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n", (gadget_is_superspeed(c->cdev->gadget) ? "super" : (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")), - f->name, ss->in_ep->name, ss->out_ep->name); + f->name, ss->in_ep->name, ss->out_ep->name, + ss->iso_in_ep ? ss->iso_in_ep->name : "<none>", + ss->iso_out_ep ? ss->iso_out_ep->name : "<none>"); return 0; } @@ -251,6 +468,9 @@ static int check_read_data(struct f_sourcesink *ss, struct usb_request *req) u8 *buf = req->buf; struct usb_composite_dev *cdev = ss->function.config->cdev; + if (pattern == 2) + return 0; + for (i = 0; i < req->actual; i++, buf++) { switch (pattern) { @@ -265,7 +485,7 @@ static int check_read_data(struct f_sourcesink *ss, struct usb_request *req) * each usb transfer request should be. Resync is done * with set_interface or set_config. (We *WANT* it to * get quickly out of sync if controllers or their drivers - * stutter for any reason, including buffer duplcation...) + * stutter for any reason, including buffer duplication...) */ case 1: if (*buf == (u8)(i % 63)) @@ -292,21 +512,30 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req) for (i = 0; i < req->length; i++) *buf++ = (u8) (i % 63); break; + case 2: + break; } } static void source_sink_complete(struct usb_ep *ep, struct usb_request *req) { - struct f_sourcesink *ss = ep->driver_data; - struct usb_composite_dev *cdev = ss->function.config->cdev; - int status = req->status; + struct usb_composite_dev *cdev; + struct f_sourcesink *ss = ep->driver_data; + int status = req->status; + + /* driver_data will be null if ep has been disabled */ + if (!ss) + return; + + cdev = ss->function.config->cdev; switch (status) { case 0: /* normal completion? */ if (ep == ss->out_ep) { check_read_data(ss, req); - memset(req->buf, 0x55, req->length); + if (pattern != 2) + memset(req->buf, 0x55, req->length); } else reinit_write_data(ep, req); break; @@ -344,32 +573,57 @@ static void source_sink_complete(struct usb_ep *ep, struct usb_request *req) } } -static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in) +static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in, + bool is_iso, int speed) { struct usb_ep *ep; struct usb_request *req; - int status; + int i, size, status; + + for (i = 0; i < 8; i++) { + if (is_iso) { + switch (speed) { + case USB_SPEED_SUPER: + size = isoc_maxpacket * (isoc_mult + 1) * + (isoc_maxburst + 1); + break; + case USB_SPEED_HIGH: + size = isoc_maxpacket * (isoc_mult + 1); + break; + default: + size = isoc_maxpacket > 1023 ? + 1023 : isoc_maxpacket; + break; + } + ep = is_in ? ss->iso_in_ep : ss->iso_out_ep; + req = alloc_ep_req(ep, size); + } else { + ep = is_in ? ss->in_ep : ss->out_ep; + req = alloc_ep_req(ep, 0); + } - ep = is_in ? ss->in_ep : ss->out_ep; - req = alloc_ep_req(ep); - if (!req) - return -ENOMEM; + if (!req) + return -ENOMEM; - req->complete = source_sink_complete; - if (is_in) - reinit_write_data(ep, req); - else - memset(req->buf, 0x55, req->length); + req->complete = source_sink_complete; + if (is_in) + reinit_write_data(ep, req); + else if (pattern != 2) + memset(req->buf, 0x55, req->length); - status = usb_ep_queue(ep, req, GFP_ATOMIC); - if (status) { - struct usb_composite_dev *cdev; + status = usb_ep_queue(ep, req, GFP_ATOMIC); + if (status) { + struct usb_composite_dev *cdev; - cdev = ss->function.config->cdev; - ERROR(cdev, "start %s %s --> %d\n", - is_in ? "IN" : "OUT", - ep->name, status); - free_ep_req(ep, req); + cdev = ss->function.config->cdev; + ERROR(cdev, "start %s%s %s --> %d\n", + is_iso ? "ISO-" : "", is_in ? "IN" : "OUT", + ep->name, status); + free_ep_req(ep, req); + } + + if (!is_iso) + break; } return status; @@ -380,17 +634,20 @@ static void disable_source_sink(struct f_sourcesink *ss) struct usb_composite_dev *cdev; cdev = ss->function.config->cdev; - disable_endpoints(cdev, ss->in_ep, ss->out_ep); + disable_endpoints(cdev, ss->in_ep, ss->out_ep, ss->iso_in_ep, + ss->iso_out_ep); VDBG(cdev, "%s disabled\n", ss->function.name); } static int -enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss) +enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss, + int alt) { int result = 0; + int speed = cdev->gadget->speed; struct usb_ep *ep; - /* one endpoint writes (sources) zeroes IN (to the host) */ + /* one bulk endpoint writes (sources) zeroes IN (to the host) */ ep = ss->in_ep; result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); if (result) @@ -400,7 +657,7 @@ enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss) return result; ep->driver_data = ss; - result = source_sink_start_ep(ss, true); + result = source_sink_start_ep(ss, true, false, speed); if (result < 0) { fail: ep = ss->in_ep; @@ -409,7 +666,7 @@ fail: return result; } - /* one endpoint reads (sinks) anything OUT (from the host) */ + /* one bulk endpoint reads (sinks) anything OUT (from the host) */ ep = ss->out_ep; result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); if (result) @@ -419,27 +676,82 @@ fail: goto fail; ep->driver_data = ss; - result = source_sink_start_ep(ss, false); + result = source_sink_start_ep(ss, false, false, speed); if (result < 0) { +fail2: + ep = ss->out_ep; usb_ep_disable(ep); ep->driver_data = NULL; goto fail; } - DBG(cdev, "%s enabled\n", ss->function.name); + if (alt == 0) + goto out; + + /* one iso endpoint writes (sources) zeroes IN (to the host) */ + ep = ss->iso_in_ep; + if (ep) { + result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); + if (result) + goto fail2; + result = usb_ep_enable(ep); + if (result < 0) + goto fail2; + ep->driver_data = ss; + + result = source_sink_start_ep(ss, true, true, speed); + if (result < 0) { +fail3: + ep = ss->iso_in_ep; + if (ep) { + usb_ep_disable(ep); + ep->driver_data = NULL; + } + goto fail2; + } + } + + /* one iso endpoint reads (sinks) anything OUT (from the host) */ + ep = ss->iso_out_ep; + if (ep) { + result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); + if (result) + goto fail3; + result = usb_ep_enable(ep); + if (result < 0) + goto fail3; + ep->driver_data = ss; + + result = source_sink_start_ep(ss, false, true, speed); + if (result < 0) { + usb_ep_disable(ep); + ep->driver_data = NULL; + goto fail3; + } + } +out: + ss->cur_alt = alt; + + DBG(cdev, "%s enabled, alt intf %d\n", ss->function.name, alt); return result; } static int sourcesink_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { - struct f_sourcesink *ss = func_to_ss(f); - struct usb_composite_dev *cdev = f->config->cdev; + struct f_sourcesink *ss = func_to_ss(f); + struct usb_composite_dev *cdev = f->config->cdev; - /* we know alt is zero */ if (ss->in_ep->driver_data) disable_source_sink(ss); - return enable_source_sink(cdev, ss); + return enable_source_sink(cdev, ss, alt); +} + +static int sourcesink_get_alt(struct usb_function *f, unsigned intf) +{ + struct f_sourcesink *ss = func_to_ss(f); + + return ss->cur_alt; } static void sourcesink_disable(struct usb_function *f) @@ -465,6 +777,7 @@ static int __init sourcesink_bind_config(struct usb_configuration *c) ss->function.bind = sourcesink_bind; ss->function.unbind = sourcesink_unbind; ss->function.set_alt = sourcesink_set_alt; + ss->function.get_alt = sourcesink_get_alt; ss->function.disable = sourcesink_disable; status = usb_add_function(c, &ss->function); @@ -536,7 +849,7 @@ unknown: req->length = value; value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC); if (value < 0) - ERROR(c->cdev, "source/sinkc response, err %d\n", + ERROR(c->cdev, "source/sink response, err %d\n", value); } @@ -545,12 +858,12 @@ unknown: } static struct usb_configuration sourcesink_driver = { - .label = "source/sink", - .strings = sourcesink_strings, - .setup = sourcesink_setup, - .bConfigurationValue = 3, - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, - /* .iConfiguration = DYNAMIC */ + .label = "source/sink", + .strings = sourcesink_strings, + .setup = sourcesink_setup, + .bConfigurationValue = 3, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + /* .iConfiguration = DYNAMIC */ }; /** @@ -567,7 +880,8 @@ int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume) return id; strings_sourcesink[0].id = id; - source_sink_intf.iInterface = id; + source_sink_intf_alt0.iInterface = id; + source_sink_intf_alt1.iInterface = id; sourcesink_driver.iConfiguration = id; /* support autoresume for remote wakeup testing */ diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4fac56927741..a896d73f7a93 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg) fsg->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { + DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { fsg->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; } diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 877a2c46672b..b09452d6f33a 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -71,9 +71,6 @@ static struct usb_endpoint_descriptor qe_ep0_desc = { .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, }; -/* it is initialized in probe() */ -static struct qe_udc *udc_controller; - /******************************************************************** * Internal Used Function Start ********************************************************************/ @@ -188,8 +185,8 @@ static int qe_ep0_stall(struct qe_udc *udc) { qe_eptx_stall_change(&udc->eps[0], 1); qe_eprx_stall_change(&udc->eps[0], 1); - udc_controller->ep0_state = WAIT_FOR_SETUP; - udc_controller->ep0_dir = 0; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; return 0; } @@ -450,13 +447,13 @@ static int qe_ep_rxbd_update(struct qe_ep *ep) ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer); if (ep->rxbuf_d == DMA_ADDR_INVALID) { - ep->rxbuf_d = dma_map_single(udc_controller->gadget.dev.parent, + ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent, ep->rxbuffer, size, DMA_FROM_DEVICE); ep->rxbufmap = 1; } else { - dma_sync_single_for_device(udc_controller->gadget.dev.parent, + dma_sync_single_for_device(ep->udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); ep->rxbufmap = 0; @@ -489,10 +486,10 @@ static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num) epparam = udc->ep_param[pipe_num]; usep = 0; - logepnum = (ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); usep |= (logepnum << USB_EPNUM_SHIFT); - switch (ep->desc->bmAttributes & 0x03) { + switch (ep->ep.desc->bmAttributes & 0x03) { case USB_ENDPOINT_XFER_BULK: usep |= USB_TRANS_BULK; break; @@ -644,7 +641,7 @@ static int qe_ep_init(struct qe_udc *udc, /* initialize ep structure */ ep->ep.maxpacket = max; ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; ep->init = 1; @@ -698,14 +695,14 @@ en_done: return -ENODEV; } -static inline void qe_usb_enable(void) +static inline void qe_usb_enable(struct qe_udc *udc) { - setbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN); + setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); } -static inline void qe_usb_disable(void) +static inline void qe_usb_disable(struct qe_udc *udc) { - clrbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN); + clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); } /*----------------------------------------------------------------------------* @@ -1599,7 +1596,7 @@ static int qe_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct qe_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->desc || _ep->name == ep_name[0] || + if (!_ep || !desc || _ep->name == ep_name[0] || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; @@ -1629,7 +1626,7 @@ static int qe_ep_disable(struct usb_ep *_ep) ep = container_of(_ep, struct qe_ep, ep); udc = ep->udc; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL); return -EINVAL; } @@ -1637,7 +1634,6 @@ static int qe_ep_disable(struct usb_ep *_ep) spin_lock_irqsave(&udc->lock, flags); /* Nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; ep->tx_req = NULL; @@ -1656,13 +1652,13 @@ static int qe_ep_disable(struct usb_ep *_ep) if (ep->dir != USB_DIR_IN) { kfree(ep->rxframe); if (ep->rxbufmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, + dma_unmap_single(udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); ep->rxbuf_d = DMA_ADDR_INVALID; } else { dma_sync_single_for_cpu( - udc_controller->gadget.dev.parent, + udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); } @@ -1715,7 +1711,7 @@ static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) dev_dbg(udc->dev, "bad params\n"); return -EINVAL; } - if (!_ep || (!ep->desc && ep_index(ep))) { + if (!_ep || (!ep->ep.desc && ep_index(ep))) { dev_dbg(udc->dev, "bad ep\n"); return -EINVAL; } @@ -1826,7 +1822,7 @@ static int qe_ep_set_halt(struct usb_ep *_ep, int value) struct qe_udc *udc; ep = container_of(_ep, struct qe_ep, ep); - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { status = -EINVAL; goto out; } @@ -1880,9 +1876,10 @@ static struct usb_ep_ops qe_ep_ops = { /* Get the current frame number */ static int qe_get_frame(struct usb_gadget *gadget) { + struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget); u16 tmp; - tmp = in_be16(&udc_controller->usb_param->frame_n); + tmp = in_be16(&udc->usb_param->frame_n); if (tmp & 0x8000) tmp = tmp & 0x07ff; else @@ -1891,57 +1888,16 @@ static int qe_get_frame(struct usb_gadget *gadget) return (int)tmp; } -/* Tries to wake up the host connected to this gadget - * - * Return : 0-success - * Negative-this feature not enabled by host or not supported by device hw - */ -static int qe_wakeup(struct usb_gadget *gadget) -{ - return -ENOTSUPP; -} - -/* Notify controller that VBUS is powered, Called by whatever - detects VBUS sessions */ -static int qe_vbus_session(struct usb_gadget *gadget, int is_active) -{ - return -ENOTSUPP; -} - -/* constrain controller's VBUS power usage - * This call is used by gadget drivers during SET_CONFIGURATION calls, - * reporting how much power the device may consume. For example, this - * could affect how quickly batteries are recharged. - * - * Returns zero on success, else negative errno. - */ -static int qe_vbus_draw(struct usb_gadget *gadget, unsigned mA) -{ - return -ENOTSUPP; -} - -/* Change Data+ pullup status - * this func is used by usb_gadget_connect/disconnect - */ -static int qe_pullup(struct usb_gadget *gadget, int is_on) -{ - return -ENOTSUPP; -} - -static int fsl_qe_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int fsl_qe_stop(struct usb_gadget_driver *driver); +static int fsl_qe_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int fsl_qe_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); /* defined in usb_gadget.h */ static struct usb_gadget_ops qe_gadget_ops = { .get_frame = qe_get_frame, - .wakeup = qe_wakeup, -/* .set_selfpowered = qe_set_selfpowered,*/ /* always selfpowered */ - .vbus_session = qe_vbus_session, - .vbus_draw = qe_vbus_draw, - .pullup = qe_pullup, - .start = fsl_qe_start, - .stop = fsl_qe_stop, + .udc_start = fsl_qe_start, + .udc_stop = fsl_qe_stop, }; /*------------------------------------------------------------------------- @@ -2015,7 +1971,7 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, u16 usep; /* stall if endpoint doesn't exist */ - if (!target_ep->desc) + if (!target_ep->ep.desc) goto stall; usep = in_be16(&udc->usb_regs->usb_usep[pipe]); @@ -2190,7 +2146,7 @@ static int reset_irq(struct qe_udc *udc) if (udc->usb_state == USB_STATE_DEFAULT) return 0; - qe_usb_disable(); + qe_usb_disable(udc); out_8(&udc->usb_regs->usb_usadr, 0); for (i = 0; i < USB_MAX_ENDPOINTS; i++) { @@ -2202,7 +2158,7 @@ static int reset_irq(struct qe_udc *udc) udc->usb_state = USB_STATE_DEFAULT; udc->ep0_state = WAIT_FOR_SETUP; udc->ep0_dir = USB_DIR_OUT; - qe_usb_enable(); + qe_usb_enable(udc); return 0; } @@ -2327,92 +2283,65 @@ static irqreturn_t qe_udc_irq(int irq, void *_udc) /*------------------------------------------------------------------------- Gadget driver probe and unregister. --------------------------------------------------------------------------*/ -static int fsl_qe_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int fsl_qe_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - int retval; - unsigned long flags = 0; - - /* standard operations */ - if (!udc_controller) - return -ENODEV; - - if (!driver || driver->max_speed < USB_SPEED_FULL - || !bind || !driver->disconnect || !driver->setup) - return -EINVAL; - - if (udc_controller->driver) - return -EBUSY; + struct qe_udc *udc; + unsigned long flags; + udc = container_of(gadget, struct qe_udc, gadget); /* lock is needed but whether should use this lock or another */ - spin_lock_irqsave(&udc_controller->lock, flags); + spin_lock_irqsave(&udc->lock, flags); driver->driver.bus = NULL; /* hook up the driver */ - udc_controller->driver = driver; - udc_controller->gadget.dev.driver = &driver->driver; - udc_controller->gadget.speed = driver->max_speed; - spin_unlock_irqrestore(&udc_controller->lock, flags); - - retval = bind(&udc_controller->gadget); - if (retval) { - dev_err(udc_controller->dev, "bind to %s --> %d", - driver->driver.name, retval); - udc_controller->gadget.dev.driver = NULL; - udc_controller->driver = NULL; - return retval; - } + udc->driver = driver; + udc->gadget.dev.driver = &driver->driver; + udc->gadget.speed = driver->max_speed; /* Enable IRQ reg and Set usbcmd reg EN bit */ - qe_usb_enable(); - - out_be16(&udc_controller->usb_regs->usb_usber, 0xffff); - out_be16(&udc_controller->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE); - udc_controller->usb_state = USB_STATE_ATTACHED; - udc_controller->ep0_state = WAIT_FOR_SETUP; - udc_controller->ep0_dir = USB_DIR_OUT; - dev_info(udc_controller->dev, "%s bind to driver %s \n", - udc_controller->gadget.name, driver->driver.name); + qe_usb_enable(udc); + + out_be16(&udc->usb_regs->usb_usber, 0xffff); + out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE); + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = USB_DIR_OUT; + spin_unlock_irqrestore(&udc->lock, flags); + + dev_info(udc->dev, "%s bind to driver %s\n", udc->gadget.name, + driver->driver.name); return 0; } -static int fsl_qe_stop(struct usb_gadget_driver *driver) +static int fsl_qe_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { + struct qe_udc *udc; struct qe_ep *loop_ep; unsigned long flags; - if (!udc_controller) - return -ENODEV; - - if (!driver || driver != udc_controller->driver) - return -EINVAL; - + udc = container_of(gadget, struct qe_udc, gadget); /* stop usb controller, disable intr */ - qe_usb_disable(); + qe_usb_disable(udc); /* in fact, no needed */ - udc_controller->usb_state = USB_STATE_ATTACHED; - udc_controller->ep0_state = WAIT_FOR_SETUP; - udc_controller->ep0_dir = 0; + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; /* stand operation */ - spin_lock_irqsave(&udc_controller->lock, flags); - udc_controller->gadget.speed = USB_SPEED_UNKNOWN; - nuke(&udc_controller->eps[0], -ESHUTDOWN); - list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list, - ep.ep_list) + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + nuke(&udc->eps[0], -ESHUTDOWN); + list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list) nuke(loop_ep, -ESHUTDOWN); - spin_unlock_irqrestore(&udc_controller->lock, flags); - - /* report disconnect; the controller is already quiesced */ - driver->disconnect(&udc_controller->gadget); + spin_unlock_irqrestore(&udc->lock, flags); - /* unbind gadget and unhook driver. */ - driver->unbind(&udc_controller->gadget); - udc_controller->gadget.dev.driver = NULL; - udc_controller->driver = NULL; + udc->gadget.dev.driver = NULL; + udc->driver = NULL; - dev_info(udc_controller->dev, "unregistered gadget driver '%s'\r\n", + dev_info(udc->dev, "unregistered gadget driver '%s'\r\n", driver->driver.name); return 0; } @@ -2502,7 +2431,7 @@ static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) ep->ep.ops = &qe_ep_ops; ep->stopped = 1; ep->ep.maxpacket = (unsigned short) ~0; - ep->desc = NULL; + ep->ep.desc = NULL; ep->dir = 0xff; ep->epnum = (u8)pipe_num; ep->sent = 0; @@ -2531,21 +2460,22 @@ static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) *----------------------------------------------------------------------*/ static void qe_udc_release(struct device *dev) { - int i = 0; + struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev); + int i; - complete(udc_controller->done); - cpm_muram_free(cpm_muram_offset(udc_controller->ep_param[0])); + complete(udc->done); + cpm_muram_free(cpm_muram_offset(udc->ep_param[0])); for (i = 0; i < USB_MAX_ENDPOINTS; i++) - udc_controller->ep_param[i] = NULL; + udc->ep_param[i] = NULL; - kfree(udc_controller); - udc_controller = NULL; + kfree(udc); } /* Driver probe functions */ static const struct of_device_id qe_udc_match[]; static int __devinit qe_udc_probe(struct platform_device *ofdev) { + struct qe_udc *udc; const struct of_device_id *match; struct device_node *np = ofdev->dev.of_node; struct qe_ep *ep; @@ -2562,44 +2492,44 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev) return -ENODEV; /* Initialize the udc structure including QH member and other member */ - udc_controller = qe_udc_config(ofdev); - if (!udc_controller) { + udc = qe_udc_config(ofdev); + if (!udc) { dev_err(&ofdev->dev, "failed to initialize\n"); return -ENOMEM; } - udc_controller->soc_type = (unsigned long)match->data; - udc_controller->usb_regs = of_iomap(np, 0); - if (!udc_controller->usb_regs) { + udc->soc_type = (unsigned long)match->data; + udc->usb_regs = of_iomap(np, 0); + if (!udc->usb_regs) { ret = -ENOMEM; goto err1; } /* initialize usb hw reg except for regs for EP, * leave usbintr reg untouched*/ - qe_udc_reg_init(udc_controller); + qe_udc_reg_init(udc); /* here comes the stand operations for probe * set the qe_udc->gadget.xxx */ - udc_controller->gadget.ops = &qe_gadget_ops; + udc->gadget.ops = &qe_gadget_ops; /* gadget.ep0 is a pointer */ - udc_controller->gadget.ep0 = &udc_controller->eps[0].ep; + udc->gadget.ep0 = &udc->eps[0].ep; - INIT_LIST_HEAD(&udc_controller->gadget.ep_list); + INIT_LIST_HEAD(&udc->gadget.ep_list); /* modify in register gadget process */ - udc_controller->gadget.speed = USB_SPEED_UNKNOWN; + udc->gadget.speed = USB_SPEED_UNKNOWN; /* name: Identifies the controller hardware type. */ - udc_controller->gadget.name = driver_name; + udc->gadget.name = driver_name; - device_initialize(&udc_controller->gadget.dev); + device_initialize(&udc->gadget.dev); - dev_set_name(&udc_controller->gadget.dev, "gadget"); + dev_set_name(&udc->gadget.dev, "gadget"); - udc_controller->gadget.dev.release = qe_udc_release; - udc_controller->gadget.dev.parent = &ofdev->dev; + udc->gadget.dev.release = qe_udc_release; + udc->gadget.dev.parent = &ofdev->dev; /* initialize qe_ep struct */ for (i = 0; i < USB_MAX_ENDPOINTS ; i++) { @@ -2608,104 +2538,104 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev) /* setup the qe_ep struct and link ep.ep.list * into gadget.ep_list */ - qe_ep_config(udc_controller, (unsigned char)i); + qe_ep_config(udc, (unsigned char)i); } /* ep0 initialization in here */ - ret = qe_ep_init(udc_controller, 0, &qe_ep0_desc); + ret = qe_ep_init(udc, 0, &qe_ep0_desc); if (ret) goto err2; /* create a buf for ZLP send, need to remain zeroed */ - udc_controller->nullbuf = kzalloc(256, GFP_KERNEL); - if (udc_controller->nullbuf == NULL) { - dev_err(udc_controller->dev, "cannot alloc nullbuf\n"); + udc->nullbuf = kzalloc(256, GFP_KERNEL); + if (udc->nullbuf == NULL) { + dev_err(udc->dev, "cannot alloc nullbuf\n"); ret = -ENOMEM; goto err3; } /* buffer for data of get_status request */ - udc_controller->statusbuf = kzalloc(2, GFP_KERNEL); - if (udc_controller->statusbuf == NULL) { + udc->statusbuf = kzalloc(2, GFP_KERNEL); + if (udc->statusbuf == NULL) { ret = -ENOMEM; goto err4; } - udc_controller->nullp = virt_to_phys((void *)udc_controller->nullbuf); - if (udc_controller->nullp == DMA_ADDR_INVALID) { - udc_controller->nullp = dma_map_single( - udc_controller->gadget.dev.parent, - udc_controller->nullbuf, + udc->nullp = virt_to_phys((void *)udc->nullbuf); + if (udc->nullp == DMA_ADDR_INVALID) { + udc->nullp = dma_map_single( + udc->gadget.dev.parent, + udc->nullbuf, 256, DMA_TO_DEVICE); - udc_controller->nullmap = 1; + udc->nullmap = 1; } else { - dma_sync_single_for_device(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + dma_sync_single_for_device(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); } - tasklet_init(&udc_controller->rx_tasklet, ep_rx_tasklet, - (unsigned long)udc_controller); + tasklet_init(&udc->rx_tasklet, ep_rx_tasklet, + (unsigned long)udc); /* request irq and disable DR */ - udc_controller->usb_irq = irq_of_parse_and_map(np, 0); - if (!udc_controller->usb_irq) { + udc->usb_irq = irq_of_parse_and_map(np, 0); + if (!udc->usb_irq) { ret = -EINVAL; goto err_noirq; } - ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0, - driver_name, udc_controller); + ret = request_irq(udc->usb_irq, qe_udc_irq, 0, + driver_name, udc); if (ret) { - dev_err(udc_controller->dev, "cannot request irq %d err %d \n", - udc_controller->usb_irq, ret); + dev_err(udc->dev, "cannot request irq %d err %d\n", + udc->usb_irq, ret); goto err5; } - ret = device_add(&udc_controller->gadget.dev); + ret = device_add(&udc->gadget.dev); if (ret) goto err6; - ret = usb_add_gadget_udc(&ofdev->dev, &udc_controller->gadget); + ret = usb_add_gadget_udc(&ofdev->dev, &udc->gadget); if (ret) goto err7; - dev_info(udc_controller->dev, + dev_set_drvdata(&ofdev->dev, udc); + dev_info(udc->dev, "%s USB controller initialized as device\n", - (udc_controller->soc_type == PORT_QE) ? "QE" : "CPM"); + (udc->soc_type == PORT_QE) ? "QE" : "CPM"); return 0; err7: - device_unregister(&udc_controller->gadget.dev); + device_unregister(&udc->gadget.dev); err6: - free_irq(udc_controller->usb_irq, udc_controller); + free_irq(udc->usb_irq, udc); err5: - irq_dispose_mapping(udc_controller->usb_irq); + irq_dispose_mapping(udc->usb_irq); err_noirq: - if (udc_controller->nullmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + if (udc->nullmap) { + dma_unmap_single(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); - udc_controller->nullp = DMA_ADDR_INVALID; + udc->nullp = DMA_ADDR_INVALID; } else { - dma_sync_single_for_cpu(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + dma_sync_single_for_cpu(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); } - kfree(udc_controller->statusbuf); + kfree(udc->statusbuf); err4: - kfree(udc_controller->nullbuf); + kfree(udc->nullbuf); err3: - ep = &udc_controller->eps[0]; + ep = &udc->eps[0]; cpm_muram_free(cpm_muram_offset(ep->rxbase)); kfree(ep->rxframe); kfree(ep->rxbuffer); kfree(ep->txframe); err2: - iounmap(udc_controller->usb_regs); + iounmap(udc->usb_regs); err1: - kfree(udc_controller); - udc_controller = NULL; + kfree(udc); return ret; } @@ -2723,44 +2653,41 @@ static int qe_udc_resume(struct platform_device *dev) static int __devexit qe_udc_remove(struct platform_device *ofdev) { + struct qe_udc *udc = dev_get_drvdata(&ofdev->dev); struct qe_ep *ep; unsigned int size; - DECLARE_COMPLETION(done); - if (!udc_controller) - return -ENODEV; - - usb_del_gadget_udc(&udc_controller->gadget); + usb_del_gadget_udc(&udc->gadget); - udc_controller->done = &done; - tasklet_disable(&udc_controller->rx_tasklet); + udc->done = &done; + tasklet_disable(&udc->rx_tasklet); - if (udc_controller->nullmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + if (udc->nullmap) { + dma_unmap_single(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); - udc_controller->nullp = DMA_ADDR_INVALID; + udc->nullp = DMA_ADDR_INVALID; } else { - dma_sync_single_for_cpu(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + dma_sync_single_for_cpu(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); } - kfree(udc_controller->statusbuf); - kfree(udc_controller->nullbuf); + kfree(udc->statusbuf); + kfree(udc->nullbuf); - ep = &udc_controller->eps[0]; + ep = &udc->eps[0]; cpm_muram_free(cpm_muram_offset(ep->rxbase)); size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1); kfree(ep->rxframe); if (ep->rxbufmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, + dma_unmap_single(udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); ep->rxbuf_d = DMA_ADDR_INVALID; } else { - dma_sync_single_for_cpu(udc_controller->gadget.dev.parent, + dma_sync_single_for_cpu(udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); } @@ -2768,14 +2695,14 @@ static int __devexit qe_udc_remove(struct platform_device *ofdev) kfree(ep->rxbuffer); kfree(ep->txframe); - free_irq(udc_controller->usb_irq, udc_controller); - irq_dispose_mapping(udc_controller->usb_irq); + free_irq(udc->usb_irq, udc); + irq_dispose_mapping(udc->usb_irq); - tasklet_kill(&udc_controller->rx_tasklet); + tasklet_kill(&udc->rx_tasklet); - iounmap(udc_controller->usb_regs); + iounmap(udc->usb_regs); - device_unregister(&udc_controller->gadget.dev); + device_unregister(&udc->gadget.dev); /* wait for release() of gadget.dev to free udc */ wait_for_completion(&done); diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h index 1da5fb03d218..7026919fc901 100644 --- a/drivers/usb/gadget/fsl_qe_udc.h +++ b/drivers/usb/gadget/fsl_qe_udc.h @@ -153,10 +153,10 @@ struct usb_ep_para{ #define USB_BUSMODE_DTB 0x02 /* Endpoint basic handle */ -#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF) +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) #define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN) : ((EP)->desc->bEndpointAddress \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ & USB_DIR_IN) == USB_DIR_IN) /* ep0 transfer state */ @@ -266,7 +266,6 @@ struct qe_ep { struct usb_ep ep; struct list_head queue; struct qe_udc *udc; - const struct usb_endpoint_descriptor *desc; struct usb_gadget *gadget; u8 state; diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 55abfb6bd612..bc6f9bb9994a 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2007,2011 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc. * All rights reserved. * * Author: Li Yang <leoli@freescale.com> @@ -58,9 +58,8 @@ static const char driver_name[] = "fsl-usb2-udc"; static const char driver_desc[] = DRIVER_DESC; static struct usb_dr_device *dr_regs; -#ifndef CONFIG_ARCH_MXC + static struct usb_sys_interface *usb_sys_regs; -#endif /* it is initialized in probe() */ static struct fsl_udc *udc_controller = NULL; @@ -244,10 +243,9 @@ static int dr_controller_setup(struct fsl_udc *udc) { unsigned int tmp, portctrl, ep_num; unsigned int max_no_of_ep; -#ifndef CONFIG_ARCH_MXC unsigned int ctrl; -#endif unsigned long timeout; + #define FSL_UDC_RESET_TIMEOUT 1000 /* Config PHY interface */ @@ -255,12 +253,32 @@ static int dr_controller_setup(struct fsl_udc *udc) portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH); switch (udc->phy_mode) { case FSL_USB2_PHY_ULPI: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl &= ~USB_CTRL_UTMI_PHY_EN; + ctrl |= USB_CTRL_USB_EN; + __raw_writel(ctrl, &usb_sys_regs->control); + } + } portctrl |= PORTSCX_PTS_ULPI; break; case FSL_USB2_PHY_UTMI_WIDE: portctrl |= PORTSCX_PTW_16BIT; /* fall through */ case FSL_USB2_PHY_UTMI: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl |= (USB_CTRL_UTMI_PHY_EN | + USB_CTRL_USB_EN); + __raw_writel(ctrl, &usb_sys_regs->control); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI + PHY CLK to become stable - 10ms*/ + } + } portctrl |= PORTSCX_PTS_UTMI; break; case FSL_USB2_PHY_SERIAL: @@ -549,7 +567,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct fsl_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->desc + if (!_ep || !desc || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; @@ -590,7 +608,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, spin_lock_irqsave(&udc->lock, flags); ep->ep.maxpacket = max; - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; /* Controller related setup */ @@ -614,7 +632,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, retval = 0; VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name, - ep->desc->bEndpointAddress & 0x0f, + ep->ep.desc->bEndpointAddress & 0x0f, (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", max); en_done: @@ -634,7 +652,7 @@ static int fsl_ep_disable(struct usb_ep *_ep) int ep_num; ep = container_of(_ep, struct fsl_ep, ep); - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { VDBG("%s not enabled", _ep ? ep->ep.name : NULL); return -EINVAL; } @@ -657,7 +675,6 @@ static int fsl_ep_disable(struct usb_ep *_ep) /* nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; spin_unlock_irqrestore(&udc->lock, flags); @@ -736,6 +753,8 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); lastreq->tail->next_td_ptr = cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); + /* Ensure dTD's next dtd pointer to be updated */ + wmb(); /* Read prime bit, if 1 goto done */ if (fsl_readl(&dr_regs->endpointprime) & bitmask) return; @@ -874,11 +893,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) VDBG("%s, bad params", __func__); return -EINVAL; } - if (unlikely(!_ep || !ep->desc)) { + if (unlikely(!_ep || !ep->ep.desc)) { VDBG("%s, bad ep", __func__); return -EINVAL; } - if (usb_endpoint_xfer_isoc(ep->desc)) { + if (usb_endpoint_xfer_isoc(ep->ep.desc)) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; } @@ -1017,12 +1036,12 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value) ep = container_of(_ep, struct fsl_ep, ep); udc = ep->udc; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { status = -EINVAL; goto out; } - if (usb_endpoint_xfer_isoc(ep->desc)) { + if (usb_endpoint_xfer_isoc(ep->ep.desc)) { status = -EOPNOTSUPP; goto out; } @@ -1061,7 +1080,7 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) struct ep_queue_head *qh; ep = container_of(_ep, struct fsl_ep, ep); - if (!_ep || (!ep->desc && ep_index(ep) != 0)) + if (!_ep || (!ep->ep.desc && ep_index(ep) != 0)) return -ENODEV; udc = (struct fsl_udc *)ep->udc; @@ -1094,7 +1113,7 @@ static void fsl_ep_fifo_flush(struct usb_ep *_ep) return; } else { ep = container_of(_ep, struct fsl_ep, ep); - if (!ep->desc) + if (!ep->ep.desc) return; } ep_num = ep_index(ep); @@ -1349,7 +1368,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index)); /* stall if endpoint doesn't exist */ - if (!target_ep->desc) + if (!target_ep->ep.desc) goto stall; tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep)) << USB_ENDPOINT_HALT; @@ -2259,7 +2278,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, } /* other gadget->eplist ep */ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) { + if (ep->ep.desc) { t = scnprintf(next, size, "\nFor %s Maxpkt is 0x%x " "index is 0x%x\n", @@ -2556,7 +2575,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) /* for ep0: the desc defined here; * for other eps, gadget layer called ep_enable with defined desc */ - udc_controller->eps[0].desc = &fsl_ep0_desc; + udc_controller->eps[0].ep.desc = &fsl_ep0_desc; udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD; /* setup the udc->eps[] for non-control endpoints and link diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index e651469fd39b..f61a967f7082 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -1,4 +1,12 @@ /* + * Copyright (C) 2004,2012 Freescale Semiconductor, Inc + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * * Freescale USB device/endpoint management registers */ #ifndef __FSL_USB2_UDC_H @@ -348,6 +356,9 @@ struct usb_sys_interface { /* control Register Bit Masks */ #define USB_CTRL_IOENB 0x00000004 #define USB_CTRL_ULPI_INT0EN 0x00000001 +#define USB_CTRL_UTMI_PHY_EN 0x00000200 +#define USB_CTRL_USB_EN 0x00000004 +#define USB_CTRL_ULPI_PHY_CLK_SEL 0x00000400 /* Endpoint Queue Head data struct * Rem: all the variables of qh are LittleEndian Mode @@ -450,7 +461,6 @@ struct fsl_ep { struct list_head queue; struct fsl_udc *udc; struct ep_queue_head *qh; - const struct usb_endpoint_descriptor *desc; struct usb_gadget *gadget; char name[14]; @@ -558,10 +568,10 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length) /* * ### internal used help routines. */ -#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF) +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress&0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) #define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN ):((EP)->desc->bEndpointAddress \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ & USB_DIR_IN)==USB_DIR_IN) #define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \ &udc->eps[pipe]) diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 5831cb4a0b35..cdd94540e1cd 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -203,7 +203,7 @@ static int config_ep(struct fusb300_ep *ep, struct fusb300 *fusb300 = ep->fusb300; struct fusb300_ep_info info; - ep->desc = desc; + ep->ep.desc = desc; info.interval = 0; info.addrofs = 0; @@ -443,7 +443,7 @@ static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == NULL) /* ep0 */ + if (ep->ep.desc == NULL) /* ep0 */ ep0_queue(ep, req); else if (request && !ep->stall) enable_fifo_int(ep); diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h index 92745bd03064..542cd83cc806 100644 --- a/drivers/usb/gadget/fusb300_udc.h +++ b/drivers/usb/gadget/fusb300_udc.h @@ -650,7 +650,6 @@ struct fusb300_ep { unsigned char epnum; unsigned char type; - const struct usb_endpoint_descriptor *desc; }; struct fusb300 { diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index a85eaf40b948..d3ace9002a6a 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -67,6 +67,15 @@ MODULE_LICENSE("GPL"); #define GFS_VENDOR_ID 0x1d6b /* Linux Foundation */ #define GFS_PRODUCT_ID 0x0105 /* FunctionFS Gadget */ +#define GFS_MAX_DEVS 10 + +struct gfs_ffs_obj { + const char *name; + bool mounted; + bool desc_ready; + struct ffs_data *ffs_data; +}; + static struct usb_device_descriptor gfs_dev_desc = { .bLength = sizeof gfs_dev_desc, .bDescriptorType = USB_DT_DEVICE, @@ -78,12 +87,17 @@ static struct usb_device_descriptor gfs_dev_desc = { .idProduct = cpu_to_le16(GFS_PRODUCT_ID), }; +static char *func_names[GFS_MAX_DEVS]; +static unsigned int func_num; + module_param_named(bDeviceClass, gfs_dev_desc.bDeviceClass, byte, 0644); MODULE_PARM_DESC(bDeviceClass, "USB Device class"); module_param_named(bDeviceSubClass, gfs_dev_desc.bDeviceSubClass, byte, 0644); MODULE_PARM_DESC(bDeviceSubClass, "USB Device subclass"); module_param_named(bDeviceProtocol, gfs_dev_desc.bDeviceProtocol, byte, 0644); MODULE_PARM_DESC(bDeviceProtocol, "USB Device protocol"); +module_param_array_named(functions, func_names, charp, &func_num, 0); +MODULE_PARM_DESC(functions, "USB Functions list"); static const struct usb_descriptor_header *gfs_otg_desc[] = { (const struct usb_descriptor_header *) @@ -158,13 +172,34 @@ static struct usb_composite_driver gfs_driver = { .iProduct = DRIVER_DESC, }; -static struct ffs_data *gfs_ffs_data; -static unsigned long gfs_registered; +static DEFINE_MUTEX(gfs_lock); +static unsigned int missing_funcs; +static bool gfs_ether_setup; +static bool gfs_registered; +static bool gfs_single_func; +static struct gfs_ffs_obj *ffs_tab; static int __init gfs_init(void) { + int i; + ENTER(); + if (!func_num) { + gfs_single_func = true; + func_num = 1; + } + + ffs_tab = kcalloc(func_num, sizeof *ffs_tab, GFP_KERNEL); + if (!ffs_tab) + return -ENOMEM; + + if (!gfs_single_func) + for (i = 0; i < func_num; i++) + ffs_tab[i].name = func_names[i]; + + missing_funcs = func_num; + return functionfs_init(); } module_init(gfs_init); @@ -172,63 +207,165 @@ module_init(gfs_init); static void __exit gfs_exit(void) { ENTER(); + mutex_lock(&gfs_lock); - if (test_and_clear_bit(0, &gfs_registered)) + if (gfs_registered) usb_composite_unregister(&gfs_driver); + gfs_registered = false; functionfs_cleanup(); + + mutex_unlock(&gfs_lock); + kfree(ffs_tab); } module_exit(gfs_exit); +static struct gfs_ffs_obj *gfs_find_dev(const char *dev_name) +{ + int i; + + ENTER(); + + if (gfs_single_func) + return &ffs_tab[0]; + + for (i = 0; i < func_num; i++) + if (strcmp(ffs_tab[i].name, dev_name) == 0) + return &ffs_tab[i]; + + return NULL; +} + static int functionfs_ready_callback(struct ffs_data *ffs) { + struct gfs_ffs_obj *ffs_obj; int ret; ENTER(); + mutex_lock(&gfs_lock); + + ffs_obj = ffs->private_data; + if (!ffs_obj) { + ret = -EINVAL; + goto done; + } + + if (WARN_ON(ffs_obj->desc_ready)) { + ret = -EBUSY; + goto done; + } + ffs_obj->desc_ready = true; + ffs_obj->ffs_data = ffs; - if (WARN_ON(test_and_set_bit(0, &gfs_registered))) - return -EBUSY; + if (--missing_funcs) { + ret = 0; + goto done; + } + + if (gfs_registered) { + ret = -EBUSY; + goto done; + } + gfs_registered = true; - gfs_ffs_data = ffs; ret = usb_composite_probe(&gfs_driver, gfs_bind); if (unlikely(ret < 0)) - clear_bit(0, &gfs_registered); + gfs_registered = false; + +done: + mutex_unlock(&gfs_lock); return ret; } static void functionfs_closed_callback(struct ffs_data *ffs) { + struct gfs_ffs_obj *ffs_obj; + ENTER(); + mutex_lock(&gfs_lock); - if (test_and_clear_bit(0, &gfs_registered)) + ffs_obj = ffs->private_data; + if (!ffs_obj) + goto done; + + ffs_obj->desc_ready = false; + missing_funcs++; + + if (gfs_registered) usb_composite_unregister(&gfs_driver); + gfs_registered = false; + +done: + mutex_unlock(&gfs_lock); } -static int functionfs_check_dev_callback(const char *dev_name) +static void *functionfs_acquire_dev_callback(const char *dev_name) { - return 0; + struct gfs_ffs_obj *ffs_dev; + + ENTER(); + mutex_lock(&gfs_lock); + + ffs_dev = gfs_find_dev(dev_name); + if (!ffs_dev) { + ffs_dev = ERR_PTR(-ENODEV); + goto done; + } + + if (ffs_dev->mounted) { + ffs_dev = ERR_PTR(-EBUSY); + goto done; + } + ffs_dev->mounted = true; + +done: + mutex_unlock(&gfs_lock); + return ffs_dev; } +static void functionfs_release_dev_callback(struct ffs_data *ffs_data) +{ + struct gfs_ffs_obj *ffs_dev; + + ENTER(); + mutex_lock(&gfs_lock); + + ffs_dev = ffs_data->private_data; + if (ffs_dev) + ffs_dev->mounted = false; + + mutex_unlock(&gfs_lock); +} + +/* + * It is assumed that gfs_bind is called from a context where gfs_lock is held + */ static int gfs_bind(struct usb_composite_dev *cdev) { int ret, i; ENTER(); - if (WARN_ON(!gfs_ffs_data)) + if (missing_funcs) return -ENODEV; ret = gether_setup(cdev->gadget, gfs_hostaddr); if (unlikely(ret < 0)) goto error_quick; + gfs_ether_setup = true; ret = usb_string_ids_tab(cdev, gfs_strings); if (unlikely(ret < 0)) goto error; - ret = functionfs_bind(gfs_ffs_data, cdev); - if (unlikely(ret < 0)) - goto error; + for (i = func_num; --i; ) { + ret = functionfs_bind(ffs_tab[i].ffs_data, cdev); + if (unlikely(ret < 0)) { + while (++i < func_num) + functionfs_unbind(ffs_tab[i].ffs_data); + goto error; + } + } for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) { struct gfs_configuration *c = gfs_configurations + i; @@ -246,16 +383,22 @@ static int gfs_bind(struct usb_composite_dev *cdev) return 0; error_unbind: - functionfs_unbind(gfs_ffs_data); + for (i = 0; i < func_num; i++) + functionfs_unbind(ffs_tab[i].ffs_data); error: gether_cleanup(); error_quick: - gfs_ffs_data = NULL; + gfs_ether_setup = false; return ret; } +/* + * It is assumed that gfs_unbind is called from a context where gfs_lock is held + */ static int gfs_unbind(struct usb_composite_dev *cdev) { + int i; + ENTER(); /* @@ -266,22 +409,29 @@ static int gfs_unbind(struct usb_composite_dev *cdev) * from composite on orror recovery, but what you're gonna * do...? */ - if (gfs_ffs_data) { + if (gfs_ether_setup) gether_cleanup(); - functionfs_unbind(gfs_ffs_data); - gfs_ffs_data = NULL; - } + gfs_ether_setup = false; + + for (i = func_num; --i; ) + if (ffs_tab[i].ffs_data) + functionfs_unbind(ffs_tab[i].ffs_data); return 0; } +/* + * It is assumed that gfs_do_config is called from a context where + * gfs_lock is held + */ static int gfs_do_config(struct usb_configuration *c) { struct gfs_configuration *gc = container_of(c, struct gfs_configuration, c); + int i; int ret; - if (WARN_ON(!gfs_ffs_data)) + if (missing_funcs) return -ENODEV; if (gadget_is_otg(c->cdev->gadget)) { @@ -295,9 +445,11 @@ static int gfs_do_config(struct usb_configuration *c) return ret; } - ret = functionfs_bind_config(c->cdev, c, gfs_ffs_data); - if (unlikely(ret < 0)) - return ret; + for (i = 0; i < func_num; i++) { + ret = functionfs_bind_config(c->cdev, c, ffs_tab[i].ffs_data); + if (unlikely(ret < 0)) + return ret; + } /* * After previous do_configs there may be some invalid diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h index e84b3c47ed3c..71ca193358b8 100644 --- a/drivers/usb/gadget/g_zero.h +++ b/drivers/usb/gadget/g_zero.h @@ -13,10 +13,11 @@ extern unsigned buflen; extern const struct usb_descriptor_header *otg_desc[]; /* common utilities */ -struct usb_request *alloc_ep_req(struct usb_ep *ep); +struct usb_request *alloc_ep_req(struct usb_ep *ep, int len); void free_ep_req(struct usb_ep *ep, struct usb_request *req); void disable_endpoints(struct usb_composite_dev *cdev, - struct usb_ep *in, struct usb_ep *out); + struct usb_ep *in, struct usb_ep *out, + struct usb_ep *iso_in, struct usb_ep *iso_out); /* configuration-specific linkup */ int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume); diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index a8855d0b7f3b..b8b3a3411218 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -37,6 +37,7 @@ #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) #define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) #define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) +#define gadget_is_lpc32xx(g) (!strcmp("lpc32xx_udc", (g)->name)) #define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) #define gadget_is_net2272(g) (!strcmp("net2272", (g)->name)) @@ -118,6 +119,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x31; else if (gadget_is_dwc3(gadget)) return 0x32; + else if (gadget_is_lpc32xx(gadget)) + return 0x33; return -ENOENT; } diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index e151d6b87dee..3d28fb976c78 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -102,7 +102,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !desc || ep->desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; dev = ep->dev; @@ -176,7 +176,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) command(ep->dev->regs, COMMAND_RESET, ep->num); ep->ep.maxpacket = max; ep->stopped = 0; - ep->desc = desc; + ep->ep.desc = desc; spin_unlock_irqrestore(&ep->dev->lock, flags); DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name, @@ -233,7 +233,6 @@ static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep) } ep->ep.maxpacket = MAX_FIFO_SIZE; - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; ep->irqs = 0; @@ -247,7 +246,7 @@ static int goku_ep_disable(struct usb_ep *_ep) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !ep->desc) + if (!_ep || !ep->ep.desc) return -ENODEV; dev = ep->dev; if (dev->ep0state == EP0_SUSPEND) @@ -722,7 +721,7 @@ goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) || !_req->buf || !list_empty(&req->queue))) return -EINVAL; ep = container_of(_ep, struct goku_ep, ep); - if (unlikely(!_ep || (!ep->desc && ep->num != 0))) + if (unlikely(!_ep || (!ep->ep.desc && ep->num != 0))) return -EINVAL; dev = ep->dev; if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) @@ -815,7 +814,7 @@ static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !_req || (!ep->desc && ep->num != 0)) + if (!_ep || !_req || (!ep->ep.desc && ep->num != 0)) return -EINVAL; dev = ep->dev; if (!dev->driver) @@ -896,7 +895,7 @@ static int goku_set_halt(struct usb_ep *_ep, int value) return -EINVAL; /* don't change EPxSTATUS_EP_INVALID to READY */ - } else if (!ep->desc) { + } else if (!ep->ep.desc) { DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); return -EINVAL; } @@ -955,7 +954,7 @@ static void goku_fifo_flush(struct usb_ep *_ep) VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name); /* don't change EPxSTATUS_EP_INVALID to READY */ - if (!ep->desc && ep->num != 0) { + if (!ep->ep.desc && ep->num != 0) { DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); return; } @@ -1152,7 +1151,7 @@ udc_proc_read(char *buffer, char **start, off_t off, int count, struct goku_ep *ep = &dev->ep [i]; struct goku_request *req; - if (i && !ep->desc) + if (i && !ep->ep.desc) continue; tmp = readl(ep->reg_status); @@ -1473,7 +1472,8 @@ static void ep0_setup(struct goku_udc *dev) case USB_RECIP_ENDPOINT: tmp = le16_to_cpu(ctrl.wIndex) & 0x0f; /* active endpoint */ - if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0)) + if (tmp > 3 || + (!dev->ep[tmp].ep.desc && tmp != 0)) goto stall; if (ctrl.wIndex & cpu_to_le16( USB_DIR_IN)) { @@ -1895,14 +1895,4 @@ static struct pci_driver goku_pci_driver = { /* FIXME add power management support */ }; -static int __init init (void) -{ - return pci_register_driver (&goku_pci_driver); -} -module_init (init); - -static void __exit cleanup (void) -{ - pci_unregister_driver (&goku_pci_driver); -} -module_exit (cleanup); +module_pci_driver(goku_pci_driver); diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h index e7e0c69d3b1f..85cdce0d1901 100644 --- a/drivers/usb/gadget/goku_udc.h +++ b/drivers/usb/gadget/goku_udc.h @@ -216,7 +216,6 @@ struct goku_ep { /* analogous to a host-side qh */ struct list_head queue; - const struct usb_endpoint_descriptor *desc; u32 __iomem *reg_fifo; u32 __iomem *reg_mode; diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 8d1c75abd73d..54034f84f992 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1237,14 +1237,15 @@ irq_handler_t intr_handler(int i) ******************************************************************************* */ -static int imx_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int imx_udc_stop(struct usb_gadget_driver *driver); +static int imx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int imx_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops imx_udc_ops = { - .get_frame = imx_udc_get_frame, - .wakeup = imx_udc_wakeup, - .start = imx_udc_start, - .stop = imx_udc_stop, + .get_frame = imx_udc_get_frame, + .wakeup = imx_udc_wakeup, + .udc_start = imx_udc_start, + .udc_stop = imx_udc_stop, }; static struct imx_udc_struct controller = { @@ -1329,23 +1330,13 @@ static struct imx_udc_struct controller = { * USB gadget driver functions ******************************************************************************* */ -static int imx_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int imx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct imx_udc_struct *imx_usb = &controller; + struct imx_udc_struct *imx_usb; int retval; - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !bind - || !driver->disconnect - || !driver->setup) - return -EINVAL; - if (!imx_usb) - return -ENODEV; - if (imx_usb->driver) - return -EBUSY; - + imx_usb = container_of(gadget, struct imx_udc_struct, gadget); /* first hook up the driver ... */ imx_usb->driver = driver; imx_usb->gadget.dev.driver = &driver->driver; @@ -1353,14 +1344,6 @@ static int imx_udc_start(struct usb_gadget_driver *driver, retval = device_add(&imx_usb->gadget.dev); if (retval) goto fail; - retval = bind(&imx_usb->gadget); - if (retval) { - D_ERR(imx_usb->dev, "<%s> bind to driver %s --> error %d\n", - __func__, driver->driver.name, retval); - device_del(&imx_usb->gadget.dev); - - goto fail; - } D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n", __func__, driver->driver.name); @@ -1374,20 +1357,16 @@ fail: return retval; } -static int imx_udc_stop(struct usb_gadget_driver *driver) +static int imx_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct imx_udc_struct *imx_usb = &controller; - - if (!imx_usb) - return -ENODEV; - if (!driver || driver != imx_usb->driver || !driver->unbind) - return -EINVAL; + struct imx_udc_struct *imx_usb = container_of(gadget, + struct imx_udc_struct, gadget); udc_stop_activity(imx_usb, driver); imx_udc_disable(imx_usb); del_timer(&imx_usb->timer); - driver->unbind(&imx_usb->gadget); imx_usb->gadget.dev.driver = NULL; imx_usb->driver = NULL; diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c deleted file mode 100644 index f9cedd52cf20..000000000000 --- a/drivers/usb/gadget/langwell_udc.c +++ /dev/null @@ -1,3434 +0,0 @@ -/* - * Intel Langwell USB Device Controller driver - * Copyright (C) 2008-2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - */ - - -/* #undef DEBUG */ -/* #undef VERBOSE_DEBUG */ - -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <linux/device.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb/otg.h> -#include <linux/pm.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <asm/unaligned.h> - -#include "langwell_udc.h" - - -#define DRIVER_DESC "Intel Langwell USB Device Controller driver" -#define DRIVER_VERSION "16 May 2009" - -static const char driver_name[] = "langwell_udc"; -static const char driver_desc[] = DRIVER_DESC; - - -/* for endpoint 0 operations */ -static const struct usb_endpoint_descriptor -langwell_ep0_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = 0, - .bmAttributes = USB_ENDPOINT_XFER_CONTROL, - .wMaxPacketSize = EP0_MAX_PKT_SIZE, -}; - - -/*-------------------------------------------------------------------------*/ -/* debugging */ - -#ifdef VERBOSE_DEBUG -static inline void print_all_registers(struct langwell_udc *dev) -{ - int i; - - /* Capability Registers */ - dev_dbg(&dev->pdev->dev, - "Capability Registers (offset: 0x%04x, length: 0x%08x)\n", - CAP_REG_OFFSET, (u32)sizeof(struct langwell_cap_regs)); - dev_dbg(&dev->pdev->dev, "caplength=0x%02x\n", - readb(&dev->cap_regs->caplength)); - dev_dbg(&dev->pdev->dev, "hciversion=0x%04x\n", - readw(&dev->cap_regs->hciversion)); - dev_dbg(&dev->pdev->dev, "hcsparams=0x%08x\n", - readl(&dev->cap_regs->hcsparams)); - dev_dbg(&dev->pdev->dev, "hccparams=0x%08x\n", - readl(&dev->cap_regs->hccparams)); - dev_dbg(&dev->pdev->dev, "dciversion=0x%04x\n", - readw(&dev->cap_regs->dciversion)); - dev_dbg(&dev->pdev->dev, "dccparams=0x%08x\n", - readl(&dev->cap_regs->dccparams)); - - /* Operational Registers */ - dev_dbg(&dev->pdev->dev, - "Operational Registers (offset: 0x%04x, length: 0x%08x)\n", - OP_REG_OFFSET, (u32)sizeof(struct langwell_op_regs)); - dev_dbg(&dev->pdev->dev, "extsts=0x%08x\n", - readl(&dev->op_regs->extsts)); - dev_dbg(&dev->pdev->dev, "extintr=0x%08x\n", - readl(&dev->op_regs->extintr)); - dev_dbg(&dev->pdev->dev, "usbcmd=0x%08x\n", - readl(&dev->op_regs->usbcmd)); - dev_dbg(&dev->pdev->dev, "usbsts=0x%08x\n", - readl(&dev->op_regs->usbsts)); - dev_dbg(&dev->pdev->dev, "usbintr=0x%08x\n", - readl(&dev->op_regs->usbintr)); - dev_dbg(&dev->pdev->dev, "frindex=0x%08x\n", - readl(&dev->op_regs->frindex)); - dev_dbg(&dev->pdev->dev, "ctrldssegment=0x%08x\n", - readl(&dev->op_regs->ctrldssegment)); - dev_dbg(&dev->pdev->dev, "deviceaddr=0x%08x\n", - readl(&dev->op_regs->deviceaddr)); - dev_dbg(&dev->pdev->dev, "endpointlistaddr=0x%08x\n", - readl(&dev->op_regs->endpointlistaddr)); - dev_dbg(&dev->pdev->dev, "ttctrl=0x%08x\n", - readl(&dev->op_regs->ttctrl)); - dev_dbg(&dev->pdev->dev, "burstsize=0x%08x\n", - readl(&dev->op_regs->burstsize)); - dev_dbg(&dev->pdev->dev, "txfilltuning=0x%08x\n", - readl(&dev->op_regs->txfilltuning)); - dev_dbg(&dev->pdev->dev, "txttfilltuning=0x%08x\n", - readl(&dev->op_regs->txttfilltuning)); - dev_dbg(&dev->pdev->dev, "ic_usb=0x%08x\n", - readl(&dev->op_regs->ic_usb)); - dev_dbg(&dev->pdev->dev, "ulpi_viewport=0x%08x\n", - readl(&dev->op_regs->ulpi_viewport)); - dev_dbg(&dev->pdev->dev, "configflag=0x%08x\n", - readl(&dev->op_regs->configflag)); - dev_dbg(&dev->pdev->dev, "portsc1=0x%08x\n", - readl(&dev->op_regs->portsc1)); - dev_dbg(&dev->pdev->dev, "devlc=0x%08x\n", - readl(&dev->op_regs->devlc)); - dev_dbg(&dev->pdev->dev, "otgsc=0x%08x\n", - readl(&dev->op_regs->otgsc)); - dev_dbg(&dev->pdev->dev, "usbmode=0x%08x\n", - readl(&dev->op_regs->usbmode)); - dev_dbg(&dev->pdev->dev, "endptnak=0x%08x\n", - readl(&dev->op_regs->endptnak)); - dev_dbg(&dev->pdev->dev, "endptnaken=0x%08x\n", - readl(&dev->op_regs->endptnaken)); - dev_dbg(&dev->pdev->dev, "endptsetupstat=0x%08x\n", - readl(&dev->op_regs->endptsetupstat)); - dev_dbg(&dev->pdev->dev, "endptprime=0x%08x\n", - readl(&dev->op_regs->endptprime)); - dev_dbg(&dev->pdev->dev, "endptflush=0x%08x\n", - readl(&dev->op_regs->endptflush)); - dev_dbg(&dev->pdev->dev, "endptstat=0x%08x\n", - readl(&dev->op_regs->endptstat)); - dev_dbg(&dev->pdev->dev, "endptcomplete=0x%08x\n", - readl(&dev->op_regs->endptcomplete)); - - for (i = 0; i < dev->ep_max / 2; i++) { - dev_dbg(&dev->pdev->dev, "endptctrl[%d]=0x%08x\n", - i, readl(&dev->op_regs->endptctrl[i])); - } -} -#else - -#define print_all_registers(dev) do { } while (0) - -#endif /* VERBOSE_DEBUG */ - - -/*-------------------------------------------------------------------------*/ - -#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \ - USB_DIR_IN) : (usb_endpoint_dir_in((ep)->desc))) - -#define DIR_STRING(ep) (is_in(ep) ? "in" : "out") - - -static char *type_string(const struct usb_endpoint_descriptor *desc) -{ - switch (usb_endpoint_type(desc)) { - case USB_ENDPOINT_XFER_BULK: - return "bulk"; - case USB_ENDPOINT_XFER_ISOC: - return "iso"; - case USB_ENDPOINT_XFER_INT: - return "int"; - }; - - return "control"; -} - - -/* configure endpoint control registers */ -static void ep_reset(struct langwell_ep *ep, unsigned char ep_num, - unsigned char is_in, unsigned char ep_type) -{ - struct langwell_udc *dev; - u32 endptctrl; - - dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - endptctrl = readl(&dev->op_regs->endptctrl[ep_num]); - if (is_in) { /* TX */ - if (ep_num) - endptctrl |= EPCTRL_TXR; - endptctrl |= EPCTRL_TXE; - endptctrl |= ep_type << EPCTRL_TXT_SHIFT; - } else { /* RX */ - if (ep_num) - endptctrl |= EPCTRL_RXR; - endptctrl |= EPCTRL_RXE; - endptctrl |= ep_type << EPCTRL_RXT_SHIFT; - } - - writel(endptctrl, &dev->op_regs->endptctrl[ep_num]); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* reset ep0 dQH and endptctrl */ -static void ep0_reset(struct langwell_udc *dev) -{ - struct langwell_ep *ep; - int i; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* ep0 in and out */ - for (i = 0; i < 2; i++) { - ep = &dev->ep[i]; - ep->dev = dev; - - /* ep0 dQH */ - ep->dqh = &dev->ep_dqh[i]; - - /* configure ep0 endpoint capabilities in dQH */ - ep->dqh->dqh_ios = 1; - ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE; - - /* enable ep0-in HW zero length termination select */ - if (is_in(ep)) - ep->dqh->dqh_zlt = 0; - ep->dqh->dqh_mult = 0; - - ep->dqh->dtd_next = DTD_TERM; - - /* configure ep0 control registers */ - ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL); - } - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/*-------------------------------------------------------------------------*/ - -/* endpoints operations */ - -/* configure endpoint, making it usable */ -static int langwell_ep_enable(struct usb_ep *_ep, - const struct usb_endpoint_descriptor *desc) -{ - struct langwell_udc *dev; - struct langwell_ep *ep; - u16 max = 0; - unsigned long flags; - int i, retval = 0; - unsigned char zlt, ios = 0, mult = 0; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (!_ep || !desc || ep->desc - || desc->bDescriptorType != USB_DT_ENDPOINT) - return -EINVAL; - - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - max = usb_endpoint_maxp(desc); - - /* - * disable HW zero length termination select - * driver handles zero length packet through req->req.zero - */ - zlt = 1; - - /* - * sanity check type, direction, address, and then - * initialize the endpoint capabilities fields in dQH - */ - switch (usb_endpoint_type(desc)) { - case USB_ENDPOINT_XFER_CONTROL: - ios = 1; - break; - case USB_ENDPOINT_XFER_BULK: - if ((dev->gadget.speed == USB_SPEED_HIGH - && max != 512) - || (dev->gadget.speed == USB_SPEED_FULL - && max > 64)) { - goto done; - } - break; - case USB_ENDPOINT_XFER_INT: - if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ - goto done; - - switch (dev->gadget.speed) { - case USB_SPEED_HIGH: - if (max <= 1024) - break; - case USB_SPEED_FULL: - if (max <= 64) - break; - default: - if (max <= 8) - break; - goto done; - } - break; - case USB_ENDPOINT_XFER_ISOC: - if (strstr(ep->ep.name, "-bulk") - || strstr(ep->ep.name, "-int")) - goto done; - - switch (dev->gadget.speed) { - case USB_SPEED_HIGH: - if (max <= 1024) - break; - case USB_SPEED_FULL: - if (max <= 1023) - break; - default: - goto done; - } - /* - * FIXME: - * calculate transactions needed for high bandwidth iso - */ - mult = (unsigned char)(1 + ((max >> 11) & 0x03)); - max = max & 0x8ff; /* bit 0~10 */ - /* 3 transactions at most */ - if (mult > 3) - goto done; - break; - default: - goto done; - } - - spin_lock_irqsave(&dev->lock, flags); - - ep->ep.maxpacket = max; - ep->desc = desc; - ep->stopped = 0; - ep->ep_num = usb_endpoint_num(desc); - - /* ep_type */ - ep->ep_type = usb_endpoint_type(desc); - - /* configure endpoint control registers */ - ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type); - - /* configure endpoint capabilities in dQH */ - i = ep->ep_num * 2 + is_in(ep); - ep->dqh = &dev->ep_dqh[i]; - ep->dqh->dqh_ios = ios; - ep->dqh->dqh_mpl = cpu_to_le16(max); - ep->dqh->dqh_zlt = zlt; - ep->dqh->dqh_mult = mult; - ep->dqh->dtd_next = DTD_TERM; - - dev_dbg(&dev->pdev->dev, "enabled %s (ep%d%s-%s), max %04x\n", - _ep->name, - ep->ep_num, - DIR_STRING(ep), - type_string(desc), - max); - - spin_unlock_irqrestore(&dev->lock, flags); -done: - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return retval; -} - - -/*-------------------------------------------------------------------------*/ - -/* retire a request */ -static void done(struct langwell_ep *ep, struct langwell_request *req, - int status) -{ - struct langwell_udc *dev = ep->dev; - unsigned stopped = ep->stopped; - struct langwell_dtd *curr_dtd, *next_dtd; - int i; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* remove the req from ep->queue */ - list_del_init(&req->queue); - - if (req->req.status == -EINPROGRESS) - req->req.status = status; - else - status = req->req.status; - - /* free dTD for the request */ - next_dtd = req->head; - for (i = 0; i < req->dtd_count; i++) { - curr_dtd = next_dtd; - if (i != req->dtd_count - 1) - next_dtd = curr_dtd->next_dtd_virt; - dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma); - } - - usb_gadget_unmap_request(&dev->gadget, &req->req, is_in(ep)); - - if (status != -ESHUTDOWN) - dev_dbg(&dev->pdev->dev, - "complete %s, req %p, stat %d, len %u/%u\n", - ep->ep.name, &req->req, status, - req->req.actual, req->req.length); - - /* don't modify queue heads during completion callback */ - ep->stopped = 1; - - spin_unlock(&dev->lock); - /* complete routine from gadget driver */ - if (req->req.complete) - req->req.complete(&ep->ep, &req->req); - - spin_lock(&dev->lock); - ep->stopped = stopped; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -static void langwell_ep_fifo_flush(struct usb_ep *_ep); - -/* delete all endpoint requests, called with spinlock held */ -static void nuke(struct langwell_ep *ep, int status) -{ - /* called with spinlock held */ - ep->stopped = 1; - - /* endpoint fifo flush */ - if (&ep->ep && ep->desc) - langwell_ep_fifo_flush(&ep->ep); - - while (!list_empty(&ep->queue)) { - struct langwell_request *req = NULL; - req = list_entry(ep->queue.next, struct langwell_request, - queue); - done(ep, req, status); - } -} - - -/*-------------------------------------------------------------------------*/ - -/* endpoint is no longer usable */ -static int langwell_ep_disable(struct usb_ep *_ep) -{ - struct langwell_ep *ep; - unsigned long flags; - struct langwell_udc *dev; - int ep_num; - u32 endptctrl; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (!_ep || !ep->desc) - return -EINVAL; - - spin_lock_irqsave(&dev->lock, flags); - - /* disable endpoint control register */ - ep_num = ep->ep_num; - endptctrl = readl(&dev->op_regs->endptctrl[ep_num]); - if (is_in(ep)) - endptctrl &= ~EPCTRL_TXE; - else - endptctrl &= ~EPCTRL_RXE; - writel(endptctrl, &dev->op_regs->endptctrl[ep_num]); - - /* nuke all pending requests (does flush) */ - nuke(ep, -ESHUTDOWN); - - ep->desc = NULL; - ep->ep.desc = NULL; - ep->stopped = 1; - - spin_unlock_irqrestore(&dev->lock, flags); - - dev_dbg(&dev->pdev->dev, "disabled %s\n", _ep->name); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - - return 0; -} - - -/* allocate a request object to use with this endpoint */ -static struct usb_request *langwell_alloc_request(struct usb_ep *_ep, - gfp_t gfp_flags) -{ - struct langwell_ep *ep; - struct langwell_udc *dev; - struct langwell_request *req = NULL; - - if (!_ep) - return NULL; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - req = kzalloc(sizeof(*req), gfp_flags); - if (!req) - return NULL; - - req->req.dma = DMA_ADDR_INVALID; - INIT_LIST_HEAD(&req->queue); - - dev_vdbg(&dev->pdev->dev, "alloc request for %s\n", _ep->name); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return &req->req; -} - - -/* free a request object */ -static void langwell_free_request(struct usb_ep *_ep, - struct usb_request *_req) -{ - struct langwell_ep *ep; - struct langwell_udc *dev; - struct langwell_request *req = NULL; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (!_ep || !_req) - return; - - req = container_of(_req, struct langwell_request, req); - WARN_ON(!list_empty(&req->queue)); - - if (_req) - kfree(req); - - dev_vdbg(&dev->pdev->dev, "free request for %s\n", _ep->name); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/*-------------------------------------------------------------------------*/ - -/* queue dTD and PRIME endpoint */ -static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req) -{ - u32 bit_mask, usbcmd, endptstat, dtd_dma; - u8 dtd_status; - int i; - struct langwell_dqh *dqh; - struct langwell_udc *dev; - - dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - i = ep->ep_num * 2 + is_in(ep); - dqh = &dev->ep_dqh[i]; - - if (ep->ep_num) - dev_vdbg(&dev->pdev->dev, "%s\n", ep->name); - else - /* ep0 */ - dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep)); - - dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n", - i, &(dev->ep_dqh[i])); - - bit_mask = is_in(ep) ? - (1 << (ep->ep_num + 16)) : (1 << (ep->ep_num)); - - dev_vdbg(&dev->pdev->dev, "bit_mask = 0x%08x\n", bit_mask); - - /* check if the pipe is empty */ - if (!(list_empty(&ep->queue))) { - /* add dTD to the end of linked list */ - struct langwell_request *lastreq; - lastreq = list_entry(ep->queue.prev, - struct langwell_request, queue); - - lastreq->tail->dtd_next = - cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK); - - /* read prime bit, if 1 goto out */ - if (readl(&dev->op_regs->endptprime) & bit_mask) - goto out; - - do { - /* set ATDTW bit in USBCMD */ - usbcmd = readl(&dev->op_regs->usbcmd); - writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd); - - /* read correct status bit */ - endptstat = readl(&dev->op_regs->endptstat) & bit_mask; - - } while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW)); - - /* write ATDTW bit to 0 */ - usbcmd = readl(&dev->op_regs->usbcmd); - writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd); - - if (endptstat) - goto out; - } - - /* write dQH next pointer and terminate bit to 0 */ - dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK; - dqh->dtd_next = cpu_to_le32(dtd_dma); - - /* clear active and halt bit */ - dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED); - dqh->dtd_status &= dtd_status; - dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status); - - /* ensure that updates to the dQH will occur before priming */ - wmb(); - - /* write 1 to endptprime register to PRIME endpoint */ - bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num); - dev_vdbg(&dev->pdev->dev, "endprime bit_mask = 0x%08x\n", bit_mask); - writel(bit_mask, &dev->op_regs->endptprime); -out: - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* fill in the dTD structure to build a transfer descriptor */ -static struct langwell_dtd *build_dtd(struct langwell_request *req, - unsigned *length, dma_addr_t *dma, int *is_last) -{ - u32 buf_ptr; - struct langwell_dtd *dtd; - struct langwell_udc *dev; - int i; - - dev = req->ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* the maximum transfer length, up to 16k bytes */ - *length = min(req->req.length - req->req.actual, - (unsigned)DTD_MAX_TRANSFER_LENGTH); - - /* create dTD dma_pool resource */ - dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma); - if (dtd == NULL) - return dtd; - dtd->dtd_dma = *dma; - - /* initialize buffer page pointers */ - buf_ptr = (u32)(req->req.dma + req->req.actual); - for (i = 0; i < 5; i++) - dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE); - - req->req.actual += *length; - - /* fill in total bytes with transfer size */ - dtd->dtd_total = cpu_to_le16(*length); - dev_vdbg(&dev->pdev->dev, "dtd->dtd_total = %d\n", dtd->dtd_total); - - /* set is_last flag if req->req.zero is set or not */ - if (req->req.zero) { - if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) - *is_last = 1; - else - *is_last = 0; - } else if (req->req.length == req->req.actual) { - *is_last = 1; - } else - *is_last = 0; - - if (*is_last == 0) - dev_vdbg(&dev->pdev->dev, "multi-dtd request!\n"); - - /* set interrupt on complete bit for the last dTD */ - if (*is_last && !req->req.no_interrupt) - dtd->dtd_ioc = 1; - - /* set multiplier override 0 for non-ISO and non-TX endpoint */ - dtd->dtd_multo = 0; - - /* set the active bit of status field to 1 */ - dtd->dtd_status = DTD_STS_ACTIVE; - dev_vdbg(&dev->pdev->dev, "dtd->dtd_status = 0x%02x\n", - dtd->dtd_status); - - dev_vdbg(&dev->pdev->dev, "length = %d, dma addr= 0x%08x\n", - *length, (int)*dma); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return dtd; -} - - -/* generate dTD linked list for a request */ -static int req_to_dtd(struct langwell_request *req) -{ - unsigned count; - int is_last, is_first = 1; - struct langwell_dtd *dtd, *last_dtd = NULL; - struct langwell_udc *dev; - dma_addr_t dma; - - dev = req->ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - do { - dtd = build_dtd(req, &count, &dma, &is_last); - if (dtd == NULL) - return -ENOMEM; - - if (is_first) { - is_first = 0; - req->head = dtd; - } else { - last_dtd->dtd_next = cpu_to_le32(dma); - last_dtd->next_dtd_virt = dtd; - } - last_dtd = dtd; - req->dtd_count++; - } while (!is_last); - - /* set terminate bit to 1 for the last dTD */ - dtd->dtd_next = DTD_TERM; - - req->tail = dtd; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* queue (submits) an I/O requests to an endpoint */ -static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req, - gfp_t gfp_flags) -{ - struct langwell_request *req; - struct langwell_ep *ep; - struct langwell_udc *dev; - unsigned long flags; - int is_iso = 0; - int ret; - - /* always require a cpu-view buffer */ - req = container_of(_req, struct langwell_request, req); - ep = container_of(_ep, struct langwell_ep, ep); - - if (!_req || !_req->complete || !_req->buf - || !list_empty(&req->queue)) { - return -EINVAL; - } - - if (unlikely(!_ep || !ep->desc)) - return -EINVAL; - - dev = ep->dev; - req->ep = ep; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (usb_endpoint_xfer_isoc(ep->desc)) { - if (req->req.length > ep->ep.maxpacket) - return -EMSGSIZE; - is_iso = 1; - } - - if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) - return -ESHUTDOWN; - - /* set up dma mapping */ - ret = usb_gadget_map_request(&dev->gadget, &req->req, is_in(ep)); - if (ret) - return ret; - - dev_dbg(&dev->pdev->dev, - "%s queue req %p, len %u, buf %p, dma 0x%08x\n", - _ep->name, - _req, _req->length, _req->buf, (int)_req->dma); - - _req->status = -EINPROGRESS; - _req->actual = 0; - req->dtd_count = 0; - - spin_lock_irqsave(&dev->lock, flags); - - /* build and put dTDs to endpoint queue */ - if (!req_to_dtd(req)) { - queue_dtd(ep, req); - } else { - spin_unlock_irqrestore(&dev->lock, flags); - return -ENOMEM; - } - - /* update ep0 state */ - if (ep->ep_num == 0) - dev->ep0_state = DATA_STATE_XMIT; - - if (likely(req != NULL)) { - list_add_tail(&req->queue, &ep->queue); - dev_vdbg(&dev->pdev->dev, "list_add_tail()\n"); - } - - spin_unlock_irqrestore(&dev->lock, flags); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* dequeue (cancels, unlinks) an I/O request from an endpoint */ -static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) -{ - struct langwell_ep *ep; - struct langwell_udc *dev; - struct langwell_request *req; - unsigned long flags; - int stopped, ep_num, retval = 0; - u32 endptctrl; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (!_ep || !ep->desc || !_req) - return -EINVAL; - - if (!dev->driver) - return -ESHUTDOWN; - - spin_lock_irqsave(&dev->lock, flags); - stopped = ep->stopped; - - /* quiesce dma while we patch the queue */ - ep->stopped = 1; - ep_num = ep->ep_num; - - /* disable endpoint control register */ - endptctrl = readl(&dev->op_regs->endptctrl[ep_num]); - if (is_in(ep)) - endptctrl &= ~EPCTRL_TXE; - else - endptctrl &= ~EPCTRL_RXE; - writel(endptctrl, &dev->op_regs->endptctrl[ep_num]); - - /* make sure it's still queued on this endpoint */ - list_for_each_entry(req, &ep->queue, queue) { - if (&req->req == _req) - break; - } - - if (&req->req != _req) { - retval = -EINVAL; - goto done; - } - - /* queue head may be partially complete. */ - if (ep->queue.next == &req->queue) { - dev_dbg(&dev->pdev->dev, "unlink (%s) dma\n", _ep->name); - _req->status = -ECONNRESET; - langwell_ep_fifo_flush(&ep->ep); - - /* not the last request in endpoint queue */ - if (likely(ep->queue.next == &req->queue)) { - struct langwell_dqh *dqh; - struct langwell_request *next_req; - - dqh = ep->dqh; - next_req = list_entry(req->queue.next, - struct langwell_request, queue); - - /* point the dQH to the first dTD of next request */ - writel((u32) next_req->head, &dqh->dqh_current); - } - } else { - struct langwell_request *prev_req; - - prev_req = list_entry(req->queue.prev, - struct langwell_request, queue); - writel(readl(&req->tail->dtd_next), - &prev_req->tail->dtd_next); - } - - done(ep, req, -ECONNRESET); - -done: - /* enable endpoint again */ - endptctrl = readl(&dev->op_regs->endptctrl[ep_num]); - if (is_in(ep)) - endptctrl |= EPCTRL_TXE; - else - endptctrl |= EPCTRL_RXE; - writel(endptctrl, &dev->op_regs->endptctrl[ep_num]); - - ep->stopped = stopped; - spin_unlock_irqrestore(&dev->lock, flags); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return retval; -} - - -/*-------------------------------------------------------------------------*/ - -/* endpoint set/clear halt */ -static void ep_set_halt(struct langwell_ep *ep, int value) -{ - u32 endptctrl = 0; - int ep_num; - struct langwell_udc *dev = ep->dev; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - ep_num = ep->ep_num; - endptctrl = readl(&dev->op_regs->endptctrl[ep_num]); - - /* value: 1 - set halt, 0 - clear halt */ - if (value) { - /* set the stall bit */ - if (is_in(ep)) - endptctrl |= EPCTRL_TXS; - else - endptctrl |= EPCTRL_RXS; - } else { - /* clear the stall bit and reset data toggle */ - if (is_in(ep)) { - endptctrl &= ~EPCTRL_TXS; - endptctrl |= EPCTRL_TXR; - } else { - endptctrl &= ~EPCTRL_RXS; - endptctrl |= EPCTRL_RXR; - } - } - - writel(endptctrl, &dev->op_regs->endptctrl[ep_num]); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* set the endpoint halt feature */ -static int langwell_ep_set_halt(struct usb_ep *_ep, int value) -{ - struct langwell_ep *ep; - struct langwell_udc *dev; - unsigned long flags; - int retval = 0; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (!_ep || !ep->desc) - return -EINVAL; - - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - if (usb_endpoint_xfer_isoc(ep->desc)) - return -EOPNOTSUPP; - - spin_lock_irqsave(&dev->lock, flags); - - /* - * attempt to halt IN ep will fail if any transfer requests - * are still queue - */ - if (!list_empty(&ep->queue) && is_in(ep) && value) { - /* IN endpoint FIFO holds bytes */ - dev_dbg(&dev->pdev->dev, "%s FIFO holds bytes\n", _ep->name); - retval = -EAGAIN; - goto done; - } - - /* endpoint set/clear halt */ - if (ep->ep_num) { - ep_set_halt(ep, value); - } else { /* endpoint 0 */ - dev->ep0_state = WAIT_FOR_SETUP; - dev->ep0_dir = USB_DIR_OUT; - } -done: - spin_unlock_irqrestore(&dev->lock, flags); - dev_dbg(&dev->pdev->dev, "%s %s halt\n", - _ep->name, value ? "set" : "clear"); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return retval; -} - - -/* set the halt feature and ignores clear requests */ -static int langwell_ep_set_wedge(struct usb_ep *_ep) -{ - struct langwell_ep *ep; - struct langwell_udc *dev; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (!_ep || !ep->desc) - return -EINVAL; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return usb_ep_set_halt(_ep); -} - - -/* flush contents of a fifo */ -static void langwell_ep_fifo_flush(struct usb_ep *_ep) -{ - struct langwell_ep *ep; - struct langwell_udc *dev; - u32 flush_bit; - unsigned long timeout; - - ep = container_of(_ep, struct langwell_ep, ep); - dev = ep->dev; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (!_ep || !ep->desc) { - dev_vdbg(&dev->pdev->dev, "ep or ep->desc is NULL\n"); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return; - } - - dev_vdbg(&dev->pdev->dev, "%s-%s fifo flush\n", - _ep->name, DIR_STRING(ep)); - - /* flush endpoint buffer */ - if (ep->ep_num == 0) - flush_bit = (1 << 16) | 1; - else if (is_in(ep)) - flush_bit = 1 << (ep->ep_num + 16); /* TX */ - else - flush_bit = 1 << ep->ep_num; /* RX */ - - /* wait until flush complete */ - timeout = jiffies + FLUSH_TIMEOUT; - do { - writel(flush_bit, &dev->op_regs->endptflush); - while (readl(&dev->op_regs->endptflush)) { - if (time_after(jiffies, timeout)) { - dev_err(&dev->pdev->dev, "ep flush timeout\n"); - goto done; - } - cpu_relax(); - } - } while (readl(&dev->op_regs->endptstat) & flush_bit); -done: - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* endpoints operations structure */ -static const struct usb_ep_ops langwell_ep_ops = { - - /* configure endpoint, making it usable */ - .enable = langwell_ep_enable, - - /* endpoint is no longer usable */ - .disable = langwell_ep_disable, - - /* allocate a request object to use with this endpoint */ - .alloc_request = langwell_alloc_request, - - /* free a request object */ - .free_request = langwell_free_request, - - /* queue (submits) an I/O requests to an endpoint */ - .queue = langwell_ep_queue, - - /* dequeue (cancels, unlinks) an I/O request from an endpoint */ - .dequeue = langwell_ep_dequeue, - - /* set the endpoint halt feature */ - .set_halt = langwell_ep_set_halt, - - /* set the halt feature and ignores clear requests */ - .set_wedge = langwell_ep_set_wedge, - - /* flush contents of a fifo */ - .fifo_flush = langwell_ep_fifo_flush, -}; - - -/*-------------------------------------------------------------------------*/ - -/* device controller usb_gadget_ops structure */ - -/* returns the current frame number */ -static int langwell_get_frame(struct usb_gadget *_gadget) -{ - struct langwell_udc *dev; - u16 retval; - - if (!_gadget) - return -ENODEV; - - dev = container_of(_gadget, struct langwell_udc, gadget); - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return retval; -} - - -/* enter or exit PHY low power state */ -static void langwell_phy_low_power(struct langwell_udc *dev, bool flag) -{ - u32 devlc; - u8 devlc_byte2; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - devlc = readl(&dev->op_regs->devlc); - dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc); - - if (flag) - devlc |= LPM_PHCD; - else - devlc &= ~LPM_PHCD; - - /* FIXME: workaround for Langwell A1/A2/A3 sighting */ - devlc_byte2 = (devlc >> 16) & 0xff; - writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2); - - devlc = readl(&dev->op_regs->devlc); - dev_vdbg(&dev->pdev->dev, - "%s PHY low power suspend, devlc = 0x%08x\n", - flag ? "enter" : "exit", devlc); -} - - -/* tries to wake up the host connected to this gadget */ -static int langwell_wakeup(struct usb_gadget *_gadget) -{ - struct langwell_udc *dev; - u32 portsc1; - unsigned long flags; - - if (!_gadget) - return 0; - - dev = container_of(_gadget, struct langwell_udc, gadget); - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* remote wakeup feature not enabled by host */ - if (!dev->remote_wakeup) { - dev_info(&dev->pdev->dev, "remote wakeup is disabled\n"); - return -ENOTSUPP; - } - - spin_lock_irqsave(&dev->lock, flags); - - portsc1 = readl(&dev->op_regs->portsc1); - if (!(portsc1 & PORTS_SUSP)) { - spin_unlock_irqrestore(&dev->lock, flags); - return 0; - } - - /* LPM L1 to L0 or legacy remote wakeup */ - if (dev->lpm && dev->lpm_state == LPM_L1) - dev_info(&dev->pdev->dev, "LPM L1 to L0 remote wakeup\n"); - else - dev_info(&dev->pdev->dev, "device remote wakeup\n"); - - /* exit PHY low power suspend */ - if (dev->pdev->device != 0x0829) - langwell_phy_low_power(dev, 0); - - /* force port resume */ - portsc1 |= PORTS_FPR; - writel(portsc1, &dev->op_regs->portsc1); - - spin_unlock_irqrestore(&dev->lock, flags); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* notify controller that VBUS is powered or not */ -static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active) -{ - struct langwell_udc *dev; - unsigned long flags; - u32 usbcmd; - - if (!_gadget) - return -ENODEV; - - dev = container_of(_gadget, struct langwell_udc, gadget); - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - spin_lock_irqsave(&dev->lock, flags); - dev_vdbg(&dev->pdev->dev, "VBUS status: %s\n", - is_active ? "on" : "off"); - - dev->vbus_active = (is_active != 0); - if (dev->driver && dev->softconnected && dev->vbus_active) { - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd |= CMD_RUNSTOP; - writel(usbcmd, &dev->op_regs->usbcmd); - } else { - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd &= ~CMD_RUNSTOP; - writel(usbcmd, &dev->op_regs->usbcmd); - } - - spin_unlock_irqrestore(&dev->lock, flags); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* constrain controller's VBUS power usage */ -static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA) -{ - struct langwell_udc *dev; - - if (!_gadget) - return -ENODEV; - - dev = container_of(_gadget, struct langwell_udc, gadget); - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (dev->transceiver) { - dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n"); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return usb_phy_set_power(dev->transceiver, mA); - } - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return -ENOTSUPP; -} - - -/* D+ pullup, software-controlled connect/disconnect to USB host */ -static int langwell_pullup(struct usb_gadget *_gadget, int is_on) -{ - struct langwell_udc *dev; - u32 usbcmd; - unsigned long flags; - - if (!_gadget) - return -ENODEV; - - dev = container_of(_gadget, struct langwell_udc, gadget); - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - spin_lock_irqsave(&dev->lock, flags); - dev->softconnected = (is_on != 0); - - if (dev->driver && dev->softconnected && dev->vbus_active) { - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd |= CMD_RUNSTOP; - writel(usbcmd, &dev->op_regs->usbcmd); - } else { - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd &= ~CMD_RUNSTOP; - writel(usbcmd, &dev->op_regs->usbcmd); - } - spin_unlock_irqrestore(&dev->lock, flags); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - -static int langwell_start(struct usb_gadget *g, - struct usb_gadget_driver *driver); - -static int langwell_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); - -/* device controller usb_gadget_ops structure */ -static const struct usb_gadget_ops langwell_ops = { - - /* returns the current frame number */ - .get_frame = langwell_get_frame, - - /* tries to wake up the host connected to this gadget */ - .wakeup = langwell_wakeup, - - /* set the device selfpowered feature, always selfpowered */ - /* .set_selfpowered = langwell_set_selfpowered, */ - - /* notify controller that VBUS is powered or not */ - .vbus_session = langwell_vbus_session, - - /* constrain controller's VBUS power usage */ - .vbus_draw = langwell_vbus_draw, - - /* D+ pullup, software-controlled connect/disconnect to USB host */ - .pullup = langwell_pullup, - - .udc_start = langwell_start, - .udc_stop = langwell_stop, -}; - - -/*-------------------------------------------------------------------------*/ - -/* device controller operations */ - -/* reset device controller */ -static int langwell_udc_reset(struct langwell_udc *dev) -{ - u32 usbcmd, usbmode, devlc, endpointlistaddr; - u8 devlc_byte0, devlc_byte2; - unsigned long timeout; - - if (!dev) - return -EINVAL; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* set controller to stop state */ - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd &= ~CMD_RUNSTOP; - writel(usbcmd, &dev->op_regs->usbcmd); - - /* reset device controller */ - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd |= CMD_RST; - writel(usbcmd, &dev->op_regs->usbcmd); - - /* wait for reset to complete */ - timeout = jiffies + RESET_TIMEOUT; - while (readl(&dev->op_regs->usbcmd) & CMD_RST) { - if (time_after(jiffies, timeout)) { - dev_err(&dev->pdev->dev, "device reset timeout\n"); - return -ETIMEDOUT; - } - cpu_relax(); - } - - /* set controller to device mode */ - usbmode = readl(&dev->op_regs->usbmode); - usbmode |= MODE_DEVICE; - - /* turn setup lockout off, require setup tripwire in usbcmd */ - usbmode |= MODE_SLOM; - - writel(usbmode, &dev->op_regs->usbmode); - usbmode = readl(&dev->op_regs->usbmode); - dev_vdbg(&dev->pdev->dev, "usbmode=0x%08x\n", usbmode); - - /* Write-Clear setup status */ - writel(0, &dev->op_regs->usbsts); - - /* if support USB LPM, ACK all LPM token */ - if (dev->lpm) { - devlc = readl(&dev->op_regs->devlc); - dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc); - /* FIXME: workaround for Langwell A1/A2/A3 sighting */ - devlc &= ~LPM_STL; /* don't STALL LPM token */ - devlc &= ~LPM_NYT_ACK; /* ACK LPM token */ - devlc_byte0 = devlc & 0xff; - devlc_byte2 = (devlc >> 16) & 0xff; - writeb(devlc_byte0, (u8 *)&dev->op_regs->devlc); - writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2); - devlc = readl(&dev->op_regs->devlc); - dev_vdbg(&dev->pdev->dev, - "ACK LPM token, devlc = 0x%08x\n", devlc); - } - - /* fill endpointlistaddr register */ - endpointlistaddr = dev->ep_dqh_dma; - endpointlistaddr &= ENDPOINTLISTADDR_MASK; - writel(endpointlistaddr, &dev->op_regs->endpointlistaddr); - - dev_vdbg(&dev->pdev->dev, - "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n", - dev->ep_dqh, endpointlistaddr, - readl(&dev->op_regs->endpointlistaddr)); - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* reinitialize device controller endpoints */ -static int eps_reinit(struct langwell_udc *dev) -{ - struct langwell_ep *ep; - char name[14]; - int i; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* initialize ep0 */ - ep = &dev->ep[0]; - ep->dev = dev; - strncpy(ep->name, "ep0", sizeof(ep->name)); - ep->ep.name = ep->name; - ep->ep.ops = &langwell_ep_ops; - ep->stopped = 0; - ep->ep.maxpacket = EP0_MAX_PKT_SIZE; - ep->ep_num = 0; - ep->desc = &langwell_ep0_desc; - INIT_LIST_HEAD(&ep->queue); - - ep->ep_type = USB_ENDPOINT_XFER_CONTROL; - - /* initialize other endpoints */ - for (i = 2; i < dev->ep_max; i++) { - ep = &dev->ep[i]; - if (i % 2) - snprintf(name, sizeof(name), "ep%din", i / 2); - else - snprintf(name, sizeof(name), "ep%dout", i / 2); - ep->dev = dev; - strncpy(ep->name, name, sizeof(ep->name)); - ep->ep.name = ep->name; - - ep->ep.ops = &langwell_ep_ops; - ep->stopped = 0; - ep->ep.maxpacket = (unsigned short) ~0; - ep->ep_num = i / 2; - - INIT_LIST_HEAD(&ep->queue); - list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); - } - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* enable interrupt and set controller to run state */ -static void langwell_udc_start(struct langwell_udc *dev) -{ - u32 usbintr, usbcmd; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* enable interrupts */ - usbintr = INTR_ULPIE /* ULPI */ - | INTR_SLE /* suspend */ - /* | INTR_SRE SOF received */ - | INTR_URE /* USB reset */ - | INTR_AAE /* async advance */ - | INTR_SEE /* system error */ - | INTR_FRE /* frame list rollover */ - | INTR_PCE /* port change detect */ - | INTR_UEE /* USB error interrupt */ - | INTR_UE; /* USB interrupt */ - writel(usbintr, &dev->op_regs->usbintr); - - /* clear stopped bit */ - dev->stopped = 0; - - /* set controller to run */ - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd |= CMD_RUNSTOP; - writel(usbcmd, &dev->op_regs->usbcmd); - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* disable interrupt and set controller to stop state */ -static void langwell_udc_stop(struct langwell_udc *dev) -{ - u32 usbcmd; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* disable all interrupts */ - writel(0, &dev->op_regs->usbintr); - - /* set stopped bit */ - dev->stopped = 1; - - /* set controller to stop state */ - usbcmd = readl(&dev->op_regs->usbcmd); - usbcmd &= ~CMD_RUNSTOP; - writel(usbcmd, &dev->op_regs->usbcmd); - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* stop all USB activities */ -static void stop_activity(struct langwell_udc *dev) -{ - struct langwell_ep *ep; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - nuke(&dev->ep[0], -ESHUTDOWN); - - list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { - nuke(ep, -ESHUTDOWN); - } - - /* report disconnect; the driver is already quiesced */ - if (dev->driver) { - spin_unlock(&dev->lock); - dev->driver->disconnect(&dev->gadget); - spin_lock(&dev->lock); - } - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/*-------------------------------------------------------------------------*/ - -/* device "function" sysfs attribute file */ -static ssize_t show_function(struct device *_dev, - struct device_attribute *attr, char *buf) -{ - struct langwell_udc *dev = dev_get_drvdata(_dev); - - if (!dev->driver || !dev->driver->function - || strlen(dev->driver->function) > PAGE_SIZE) - return 0; - - return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function); -} -static DEVICE_ATTR(function, S_IRUGO, show_function, NULL); - - -static inline enum usb_device_speed lpm_device_speed(u32 reg) -{ - switch (LPM_PSPD(reg)) { - case LPM_SPEED_HIGH: - return USB_SPEED_HIGH; - case LPM_SPEED_FULL: - return USB_SPEED_FULL; - case LPM_SPEED_LOW: - return USB_SPEED_LOW; - default: - return USB_SPEED_UNKNOWN; - } -} - -/* device "langwell_udc" sysfs attribute file */ -static ssize_t show_langwell_udc(struct device *_dev, - struct device_attribute *attr, char *buf) -{ - struct langwell_udc *dev = dev_get_drvdata(_dev); - struct langwell_request *req; - struct langwell_ep *ep = NULL; - char *next; - unsigned size; - unsigned t; - unsigned i; - unsigned long flags; - u32 tmp_reg; - - next = buf; - size = PAGE_SIZE; - spin_lock_irqsave(&dev->lock, flags); - - /* driver basic information */ - t = scnprintf(next, size, - DRIVER_DESC "\n" - "%s version: %s\n" - "Gadget driver: %s\n\n", - driver_name, DRIVER_VERSION, - dev->driver ? dev->driver->driver.name : "(none)"); - size -= t; - next += t; - - /* device registers */ - tmp_reg = readl(&dev->op_regs->usbcmd); - t = scnprintf(next, size, - "USBCMD reg:\n" - "SetupTW: %d\n" - "Run/Stop: %s\n\n", - (tmp_reg & CMD_SUTW) ? 1 : 0, - (tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop"); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->usbsts); - t = scnprintf(next, size, - "USB Status Reg:\n" - "Device Suspend: %d\n" - "Reset Received: %d\n" - "System Error: %s\n" - "USB Error Interrupt: %s\n\n", - (tmp_reg & STS_SLI) ? 1 : 0, - (tmp_reg & STS_URI) ? 1 : 0, - (tmp_reg & STS_SEI) ? "Error" : "No error", - (tmp_reg & STS_UEI) ? "Error detected" : "No error"); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->usbintr); - t = scnprintf(next, size, - "USB Intrrupt Enable Reg:\n" - "Sleep Enable: %d\n" - "SOF Received Enable: %d\n" - "Reset Enable: %d\n" - "System Error Enable: %d\n" - "Port Change Dectected Enable: %d\n" - "USB Error Intr Enable: %d\n" - "USB Intr Enable: %d\n\n", - (tmp_reg & INTR_SLE) ? 1 : 0, - (tmp_reg & INTR_SRE) ? 1 : 0, - (tmp_reg & INTR_URE) ? 1 : 0, - (tmp_reg & INTR_SEE) ? 1 : 0, - (tmp_reg & INTR_PCE) ? 1 : 0, - (tmp_reg & INTR_UEE) ? 1 : 0, - (tmp_reg & INTR_UE) ? 1 : 0); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->frindex); - t = scnprintf(next, size, - "USB Frame Index Reg:\n" - "Frame Number is 0x%08x\n\n", - (tmp_reg & FRINDEX_MASK)); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->deviceaddr); - t = scnprintf(next, size, - "USB Device Address Reg:\n" - "Device Addr is 0x%x\n\n", - USBADR(tmp_reg)); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->endpointlistaddr); - t = scnprintf(next, size, - "USB Endpoint List Address Reg:\n" - "Endpoint List Pointer is 0x%x\n\n", - EPBASE(tmp_reg)); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->portsc1); - t = scnprintf(next, size, - "USB Port Status & Control Reg:\n" - "Port Reset: %s\n" - "Port Suspend Mode: %s\n" - "Over-current Change: %s\n" - "Port Enable/Disable Change: %s\n" - "Port Enabled/Disabled: %s\n" - "Current Connect Status: %s\n" - "LPM Suspend Status: %s\n\n", - (tmp_reg & PORTS_PR) ? "Reset" : "Not Reset", - (tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend", - (tmp_reg & PORTS_OCC) ? "Detected" : "No", - (tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed", - (tmp_reg & PORTS_PE) ? "Enable" : "Not Correct", - (tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached", - (tmp_reg & PORTS_SLP) ? "LPM L1" : "LPM L0"); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->devlc); - t = scnprintf(next, size, - "Device LPM Control Reg:\n" - "Parallel Transceiver : %d\n" - "Serial Transceiver : %d\n" - "Port Speed: %s\n" - "Port Force Full Speed Connenct: %s\n" - "PHY Low Power Suspend Clock: %s\n" - "BmAttributes: %d\n\n", - LPM_PTS(tmp_reg), - (tmp_reg & LPM_STS) ? 1 : 0, - usb_speed_string(lpm_device_speed(tmp_reg)), - (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force", - (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled", - LPM_BA(tmp_reg)); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->usbmode); - t = scnprintf(next, size, - "USB Mode Reg:\n" - "Controller Mode is : %s\n\n", ({ - char *s; - switch (MODE_CM(tmp_reg)) { - case MODE_IDLE: - s = "Idle"; break; - case MODE_DEVICE: - s = "Device Controller"; break; - case MODE_HOST: - s = "Host Controller"; break; - default: - s = "None"; break; - } - s; - })); - size -= t; - next += t; - - tmp_reg = readl(&dev->op_regs->endptsetupstat); - t = scnprintf(next, size, - "Endpoint Setup Status Reg:\n" - "SETUP on ep 0x%04x\n\n", - tmp_reg & SETUPSTAT_MASK); - size -= t; - next += t; - - for (i = 0; i < dev->ep_max / 2; i++) { - tmp_reg = readl(&dev->op_regs->endptctrl[i]); - t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n", - i, tmp_reg); - size -= t; - next += t; - } - tmp_reg = readl(&dev->op_regs->endptprime); - t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg); - size -= t; - next += t; - - /* langwell_udc, langwell_ep, langwell_request structure information */ - ep = &dev->ep[0]; - t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n", - ep->ep.name, ep->ep.maxpacket, ep->ep_num); - size -= t; - next += t; - - if (list_empty(&ep->queue)) { - t = scnprintf(next, size, "its req queue is empty\n\n"); - size -= t; - next += t; - } else { - list_for_each_entry(req, &ep->queue, queue) { - t = scnprintf(next, size, - "req %p actual 0x%x length 0x%x buf %p\n", - &req->req, req->req.actual, - req->req.length, req->req.buf); - size -= t; - next += t; - } - } - /* other gadget->eplist ep */ - list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { - if (ep->desc) { - t = scnprintf(next, size, - "\n%s MaxPacketSize: 0x%x, " - "ep_num: %d\n", - ep->ep.name, ep->ep.maxpacket, - ep->ep_num); - size -= t; - next += t; - - if (list_empty(&ep->queue)) { - t = scnprintf(next, size, - "its req queue is empty\n\n"); - size -= t; - next += t; - } else { - list_for_each_entry(req, &ep->queue, queue) { - t = scnprintf(next, size, - "req %p actual 0x%x length " - "0x%x buf %p\n", - &req->req, req->req.actual, - req->req.length, req->req.buf); - size -= t; - next += t; - } - } - } - } - - spin_unlock_irqrestore(&dev->lock, flags); - return PAGE_SIZE - size; -} -static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL); - - -/* device "remote_wakeup" sysfs attribute file */ -static ssize_t store_remote_wakeup(struct device *_dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct langwell_udc *dev = dev_get_drvdata(_dev); - unsigned long flags; - ssize_t rc = count; - - if (count > 2) - return -EINVAL; - - if (count > 0 && buf[count-1] == '\n') - ((char *) buf)[count-1] = 0; - - if (buf[0] != '1') - return -EINVAL; - - /* force remote wakeup enabled in case gadget driver doesn't support */ - spin_lock_irqsave(&dev->lock, flags); - dev->remote_wakeup = 1; - dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP); - spin_unlock_irqrestore(&dev->lock, flags); - - langwell_wakeup(&dev->gadget); - - return rc; -} -static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup); - - -/*-------------------------------------------------------------------------*/ - -/* - * when a driver is successfully registered, it will receive - * control requests including set_configuration(), which enables - * non-control requests. then usb traffic follows until a - * disconnect is reported. then a host may connect again, or - * the driver might get unbound. - */ - -static int langwell_start(struct usb_gadget *g, - struct usb_gadget_driver *driver) -{ - struct langwell_udc *dev = gadget_to_langwell(g); - unsigned long flags; - int retval; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - spin_lock_irqsave(&dev->lock, flags); - - /* hook up the driver ... */ - driver->driver.bus = NULL; - dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; - - spin_unlock_irqrestore(&dev->lock, flags); - - retval = device_create_file(&dev->pdev->dev, &dev_attr_function); - if (retval) - goto err; - - dev->usb_state = USB_STATE_ATTACHED; - dev->ep0_state = WAIT_FOR_SETUP; - dev->ep0_dir = USB_DIR_OUT; - - /* enable interrupt and set controller to run state */ - if (dev->got_irq) - langwell_udc_start(dev); - - dev_vdbg(&dev->pdev->dev, - "After langwell_udc_start(), print all registers:\n"); - print_all_registers(dev); - - dev_info(&dev->pdev->dev, "register driver: %s\n", - driver->driver.name); - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - - return 0; - -err: - dev->gadget.dev.driver = NULL; - dev->driver = NULL; - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - - return retval; -} - -/* unregister gadget driver */ -static int langwell_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) -{ - struct langwell_udc *dev = gadget_to_langwell(g); - unsigned long flags; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* exit PHY low power suspend */ - if (dev->pdev->device != 0x0829) - langwell_phy_low_power(dev, 0); - - /* unbind OTG transceiver */ - if (dev->transceiver) - (void)otg_set_peripheral(dev->transceiver->otg, 0); - - /* disable interrupt and set controller to stop state */ - langwell_udc_stop(dev); - - dev->usb_state = USB_STATE_ATTACHED; - dev->ep0_state = WAIT_FOR_SETUP; - dev->ep0_dir = USB_DIR_OUT; - - spin_lock_irqsave(&dev->lock, flags); - - /* stop all usb activities */ - dev->gadget.speed = USB_SPEED_UNKNOWN; - dev->gadget.dev.driver = NULL; - dev->driver = NULL; - stop_activity(dev); - spin_unlock_irqrestore(&dev->lock, flags); - - device_remove_file(&dev->pdev->dev, &dev_attr_function); - - dev_info(&dev->pdev->dev, "unregistered driver '%s'\n", - driver->driver.name); - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* - * setup tripwire is used as a semaphore to ensure that the setup data - * payload is extracted from a dQH without being corrupted - */ -static void setup_tripwire(struct langwell_udc *dev) -{ - u32 usbcmd, - endptsetupstat; - unsigned long timeout; - struct langwell_dqh *dqh; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* ep0 OUT dQH */ - dqh = &dev->ep_dqh[EP_DIR_OUT]; - - /* Write-Clear endptsetupstat */ - endptsetupstat = readl(&dev->op_regs->endptsetupstat); - writel(endptsetupstat, &dev->op_regs->endptsetupstat); - - /* wait until endptsetupstat is cleared */ - timeout = jiffies + SETUPSTAT_TIMEOUT; - while (readl(&dev->op_regs->endptsetupstat)) { - if (time_after(jiffies, timeout)) { - dev_err(&dev->pdev->dev, "setup_tripwire timeout\n"); - break; - } - cpu_relax(); - } - - /* while a hazard exists when setup packet arrives */ - do { - /* set setup tripwire bit */ - usbcmd = readl(&dev->op_regs->usbcmd); - writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd); - - /* copy the setup packet to local buffer */ - memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8); - } while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW)); - - /* Write-Clear setup tripwire bit */ - usbcmd = readl(&dev->op_regs->usbcmd); - writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* protocol ep0 stall, will automatically be cleared on new transaction */ -static void ep0_stall(struct langwell_udc *dev) -{ - u32 endptctrl; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* set TX and RX to stall */ - endptctrl = readl(&dev->op_regs->endptctrl[0]); - endptctrl |= EPCTRL_TXS | EPCTRL_RXS; - writel(endptctrl, &dev->op_regs->endptctrl[0]); - - /* update ep0 state */ - dev->ep0_state = WAIT_FOR_SETUP; - dev->ep0_dir = USB_DIR_OUT; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* PRIME a status phase for ep0 */ -static int prime_status_phase(struct langwell_udc *dev, int dir) -{ - struct langwell_request *req; - struct langwell_ep *ep; - int status = 0; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (dir == EP_DIR_IN) - dev->ep0_dir = USB_DIR_IN; - else - dev->ep0_dir = USB_DIR_OUT; - - ep = &dev->ep[0]; - dev->ep0_state = WAIT_FOR_OUT_STATUS; - - req = dev->status_req; - - req->ep = ep; - req->req.length = 0; - req->req.status = -EINPROGRESS; - req->req.actual = 0; - req->req.complete = NULL; - req->dtd_count = 0; - - if (!req_to_dtd(req)) - status = queue_dtd(ep, req); - else - return -ENOMEM; - - if (status) - dev_err(&dev->pdev->dev, "can't queue ep0 status request\n"); - - list_add_tail(&req->queue, &ep->queue); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return status; -} - - -/* SET_ADDRESS request routine */ -static void set_address(struct langwell_udc *dev, u16 value, - u16 index, u16 length) -{ - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* save the new address to device struct */ - dev->dev_addr = (u8) value; - dev_vdbg(&dev->pdev->dev, "dev->dev_addr = %d\n", dev->dev_addr); - - /* update usb state */ - dev->usb_state = USB_STATE_ADDRESS; - - /* STATUS phase */ - if (prime_status_phase(dev, EP_DIR_IN)) - ep0_stall(dev); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* return endpoint by windex */ -static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev, - u16 wIndex) -{ - struct langwell_ep *ep; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) - return &dev->ep[0]; - - list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { - u8 bEndpointAddress; - if (!ep->desc) - continue; - - bEndpointAddress = ep->desc->bEndpointAddress; - if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) - continue; - - if ((wIndex & USB_ENDPOINT_NUMBER_MASK) - == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)) - return ep; - } - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return NULL; -} - - -/* return whether endpoint is stalled, 0: not stalled; 1: stalled */ -static int ep_is_stall(struct langwell_ep *ep) -{ - struct langwell_udc *dev = ep->dev; - u32 endptctrl; - int retval; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]); - if (is_in(ep)) - retval = endptctrl & EPCTRL_TXS ? 1 : 0; - else - retval = endptctrl & EPCTRL_RXS ? 1 : 0; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return retval; -} - - -/* GET_STATUS request routine */ -static void get_status(struct langwell_udc *dev, u8 request_type, u16 value, - u16 index, u16 length) -{ - struct langwell_request *req; - struct langwell_ep *ep; - u16 status_data = 0; /* 16 bits cpu view status data */ - int status = 0; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - ep = &dev->ep[0]; - - if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { - /* get device status */ - status_data = dev->dev_status; - } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { - /* get interface status */ - status_data = 0; - } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { - /* get endpoint status */ - struct langwell_ep *epn; - epn = get_ep_by_windex(dev, index); - /* stall if endpoint doesn't exist */ - if (!epn) - goto stall; - - status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT; - } - - dev_dbg(&dev->pdev->dev, "get status data: 0x%04x\n", status_data); - - dev->ep0_dir = USB_DIR_IN; - - /* borrow the per device status_req */ - req = dev->status_req; - - /* fill in the reqest structure */ - *((u16 *) req->req.buf) = cpu_to_le16(status_data); - req->ep = ep; - req->req.length = 2; - req->req.status = -EINPROGRESS; - req->req.actual = 0; - req->req.complete = NULL; - req->dtd_count = 0; - - /* prime the data phase */ - if (!req_to_dtd(req)) - status = queue_dtd(ep, req); - else /* no mem */ - goto stall; - - if (status) { - dev_err(&dev->pdev->dev, - "response error on GET_STATUS request\n"); - goto stall; - } - - list_add_tail(&req->queue, &ep->queue); - dev->ep0_state = DATA_STATE_XMIT; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return; -stall: - ep0_stall(dev); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* setup packet interrupt handler */ -static void handle_setup_packet(struct langwell_udc *dev, - struct usb_ctrlrequest *setup) -{ - u16 wValue = le16_to_cpu(setup->wValue); - u16 wIndex = le16_to_cpu(setup->wIndex); - u16 wLength = le16_to_cpu(setup->wLength); - u32 portsc1; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* ep0 fifo flush */ - nuke(&dev->ep[0], -ESHUTDOWN); - - dev_dbg(&dev->pdev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", - setup->bRequestType, setup->bRequest, - wValue, wIndex, wLength); - - /* RNDIS gadget delegate */ - if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) { - /* USB_CDC_SEND_ENCAPSULATED_COMMAND */ - goto delegate; - } - - /* USB_CDC_GET_ENCAPSULATED_RESPONSE */ - if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) { - /* USB_CDC_GET_ENCAPSULATED_RESPONSE */ - goto delegate; - } - - /* We process some stardard setup requests here */ - switch (setup->bRequest) { - case USB_REQ_GET_STATUS: - dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_GET_STATUS\n"); - /* get status, DATA and STATUS phase */ - if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) - != (USB_DIR_IN | USB_TYPE_STANDARD)) - break; - get_status(dev, setup->bRequestType, wValue, wIndex, wLength); - goto end; - - case USB_REQ_SET_ADDRESS: - dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_SET_ADDRESS\n"); - /* STATUS phase */ - if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD - | USB_RECIP_DEVICE)) - break; - set_address(dev, wValue, wIndex, wLength); - goto end; - - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - /* STATUS phase */ - { - int rc = -EOPNOTSUPP; - if (setup->bRequest == USB_REQ_SET_FEATURE) - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_SET_FEATURE\n"); - else if (setup->bRequest == USB_REQ_CLEAR_FEATURE) - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_CLEAR_FEATURE\n"); - - if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK)) - == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) { - struct langwell_ep *epn; - epn = get_ep_by_windex(dev, wIndex); - /* stall if endpoint doesn't exist */ - if (!epn) { - ep0_stall(dev); - goto end; - } - - if (wValue != 0 || wLength != 0 - || epn->ep_num > dev->ep_max) - break; - - spin_unlock(&dev->lock); - rc = langwell_ep_set_halt(&epn->ep, - (setup->bRequest == USB_REQ_SET_FEATURE) - ? 1 : 0); - spin_lock(&dev->lock); - - } else if ((setup->bRequestType & (USB_RECIP_MASK - | USB_TYPE_MASK)) == (USB_RECIP_DEVICE - | USB_TYPE_STANDARD)) { - rc = 0; - switch (wValue) { - case USB_DEVICE_REMOTE_WAKEUP: - if (setup->bRequest == USB_REQ_SET_FEATURE) { - dev->remote_wakeup = 1; - dev->dev_status |= (1 << wValue); - } else { - dev->remote_wakeup = 0; - dev->dev_status &= ~(1 << wValue); - } - break; - case USB_DEVICE_TEST_MODE: - dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n"); - if ((wIndex & 0xff) || - (dev->gadget.speed != USB_SPEED_HIGH)) - ep0_stall(dev); - - switch (wIndex >> 8) { - case TEST_J: - case TEST_K: - case TEST_SE0_NAK: - case TEST_PACKET: - case TEST_FORCE_EN: - if (prime_status_phase(dev, EP_DIR_IN)) - ep0_stall(dev); - portsc1 = readl(&dev->op_regs->portsc1); - portsc1 |= (wIndex & 0xf00) << 8; - writel(portsc1, &dev->op_regs->portsc1); - goto end; - default: - rc = -EOPNOTSUPP; - } - break; - default: - rc = -EOPNOTSUPP; - break; - } - - if (!gadget_is_otg(&dev->gadget)) - break; - else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) - dev->gadget.b_hnp_enable = 1; - else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) - dev->gadget.a_hnp_support = 1; - else if (setup->bRequest == - USB_DEVICE_A_ALT_HNP_SUPPORT) - dev->gadget.a_alt_hnp_support = 1; - else - break; - } else - break; - - if (rc == 0) { - if (prime_status_phase(dev, EP_DIR_IN)) - ep0_stall(dev); - } - goto end; - } - - case USB_REQ_GET_DESCRIPTOR: - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_GET_DESCRIPTOR\n"); - goto delegate; - - case USB_REQ_SET_DESCRIPTOR: - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n"); - goto delegate; - - case USB_REQ_GET_CONFIGURATION: - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_GET_CONFIGURATION\n"); - goto delegate; - - case USB_REQ_SET_CONFIGURATION: - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_SET_CONFIGURATION\n"); - goto delegate; - - case USB_REQ_GET_INTERFACE: - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_GET_INTERFACE\n"); - goto delegate; - - case USB_REQ_SET_INTERFACE: - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_SET_INTERFACE\n"); - goto delegate; - - case USB_REQ_SYNCH_FRAME: - dev_dbg(&dev->pdev->dev, - "SETUP: USB_REQ_SYNCH_FRAME unsupported\n"); - goto delegate; - - default: - /* delegate USB standard requests to the gadget driver */ - goto delegate; -delegate: - /* USB requests handled by gadget */ - if (wLength) { - /* DATA phase from gadget, STATUS phase from udc */ - dev->ep0_dir = (setup->bRequestType & USB_DIR_IN) - ? USB_DIR_IN : USB_DIR_OUT; - dev_vdbg(&dev->pdev->dev, - "dev->ep0_dir = 0x%x, wLength = %d\n", - dev->ep0_dir, wLength); - spin_unlock(&dev->lock); - if (dev->driver->setup(&dev->gadget, - &dev->local_setup_buff) < 0) - ep0_stall(dev); - spin_lock(&dev->lock); - dev->ep0_state = (setup->bRequestType & USB_DIR_IN) - ? DATA_STATE_XMIT : DATA_STATE_RECV; - } else { - /* no DATA phase, IN STATUS phase from gadget */ - dev->ep0_dir = USB_DIR_IN; - dev_vdbg(&dev->pdev->dev, - "dev->ep0_dir = 0x%x, wLength = %d\n", - dev->ep0_dir, wLength); - spin_unlock(&dev->lock); - if (dev->driver->setup(&dev->gadget, - &dev->local_setup_buff) < 0) - ep0_stall(dev); - spin_lock(&dev->lock); - dev->ep0_state = WAIT_FOR_OUT_STATUS; - } - break; - } -end: - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* transfer completion, process endpoint request and free the completed dTDs - * for this request - */ -static int process_ep_req(struct langwell_udc *dev, int index, - struct langwell_request *curr_req) -{ - struct langwell_dtd *curr_dtd; - struct langwell_dqh *curr_dqh; - int td_complete, actual, remaining_length; - int i, dir; - u8 dtd_status = 0; - int retval = 0; - - curr_dqh = &dev->ep_dqh[index]; - dir = index % 2; - - curr_dtd = curr_req->head; - td_complete = 0; - actual = curr_req->req.length; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - for (i = 0; i < curr_req->dtd_count; i++) { - - /* command execution states by dTD */ - dtd_status = curr_dtd->dtd_status; - - barrier(); - remaining_length = le16_to_cpu(curr_dtd->dtd_total); - actual -= remaining_length; - - if (!dtd_status) { - /* transfers completed successfully */ - if (!remaining_length) { - td_complete++; - dev_vdbg(&dev->pdev->dev, - "dTD transmitted successfully\n"); - } else { - if (dir) { - dev_vdbg(&dev->pdev->dev, - "TX dTD remains data\n"); - retval = -EPROTO; - break; - - } else { - td_complete++; - break; - } - } - } else { - /* transfers completed with errors */ - if (dtd_status & DTD_STS_ACTIVE) { - dev_dbg(&dev->pdev->dev, - "dTD status ACTIVE dQH[%d]\n", index); - retval = 1; - return retval; - } else if (dtd_status & DTD_STS_HALTED) { - dev_err(&dev->pdev->dev, - "dTD error %08x dQH[%d]\n", - dtd_status, index); - /* clear the errors and halt condition */ - curr_dqh->dtd_status = 0; - retval = -EPIPE; - break; - } else if (dtd_status & DTD_STS_DBE) { - dev_dbg(&dev->pdev->dev, - "data buffer (overflow) error\n"); - retval = -EPROTO; - break; - } else if (dtd_status & DTD_STS_TRE) { - dev_dbg(&dev->pdev->dev, - "transaction(ISO) error\n"); - retval = -EILSEQ; - break; - } else - dev_err(&dev->pdev->dev, - "unknown error (0x%x)!\n", - dtd_status); - } - - if (i != curr_req->dtd_count - 1) - curr_dtd = (struct langwell_dtd *) - curr_dtd->next_dtd_virt; - } - - if (retval) - return retval; - - curr_req->req.actual = actual; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* complete DATA or STATUS phase of ep0 prime status phase if needed */ -static void ep0_req_complete(struct langwell_udc *dev, - struct langwell_ep *ep0, struct langwell_request *req) -{ - u32 new_addr; - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (dev->usb_state == USB_STATE_ADDRESS) { - /* set the new address */ - new_addr = (u32)dev->dev_addr; - writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr); - - new_addr = USBADR(readl(&dev->op_regs->deviceaddr)); - dev_vdbg(&dev->pdev->dev, "new_addr = %d\n", new_addr); - } - - done(ep0, req, 0); - - switch (dev->ep0_state) { - case DATA_STATE_XMIT: - /* receive status phase */ - if (prime_status_phase(dev, EP_DIR_OUT)) - ep0_stall(dev); - break; - case DATA_STATE_RECV: - /* send status phase */ - if (prime_status_phase(dev, EP_DIR_IN)) - ep0_stall(dev); - break; - case WAIT_FOR_OUT_STATUS: - dev->ep0_state = WAIT_FOR_SETUP; - break; - case WAIT_FOR_SETUP: - dev_err(&dev->pdev->dev, "unexpect ep0 packets\n"); - break; - default: - ep0_stall(dev); - break; - } - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* USB transfer completion interrupt */ -static void handle_trans_complete(struct langwell_udc *dev) -{ - u32 complete_bits; - int i, ep_num, dir, bit_mask, status; - struct langwell_ep *epn; - struct langwell_request *curr_req, *temp_req; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - complete_bits = readl(&dev->op_regs->endptcomplete); - dev_vdbg(&dev->pdev->dev, "endptcomplete register: 0x%08x\n", - complete_bits); - - /* Write-Clear the bits in endptcomplete register */ - writel(complete_bits, &dev->op_regs->endptcomplete); - - if (!complete_bits) { - dev_dbg(&dev->pdev->dev, "complete_bits = 0\n"); - goto done; - } - - for (i = 0; i < dev->ep_max; i++) { - ep_num = i / 2; - dir = i % 2; - - bit_mask = 1 << (ep_num + 16 * dir); - - if (!(complete_bits & bit_mask)) - continue; - - /* ep0 */ - if (i == 1) - epn = &dev->ep[0]; - else - epn = &dev->ep[i]; - - if (epn->name == NULL) { - dev_warn(&dev->pdev->dev, "invalid endpoint\n"); - continue; - } - - if (i < 2) - /* ep0 in and out */ - dev_dbg(&dev->pdev->dev, "%s-%s transfer completed\n", - epn->name, - is_in(epn) ? "in" : "out"); - else - dev_dbg(&dev->pdev->dev, "%s transfer completed\n", - epn->name); - - /* process the req queue until an uncomplete request */ - list_for_each_entry_safe(curr_req, temp_req, - &epn->queue, queue) { - status = process_ep_req(dev, i, curr_req); - dev_vdbg(&dev->pdev->dev, "%s req status: %d\n", - epn->name, status); - - if (status) - break; - - /* write back status to req */ - curr_req->req.status = status; - - /* ep0 request completion */ - if (ep_num == 0) { - ep0_req_complete(dev, epn, curr_req); - break; - } else { - done(epn, curr_req, status); - } - } - } -done: - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - -/* port change detect interrupt handler */ -static void handle_port_change(struct langwell_udc *dev) -{ - u32 portsc1, devlc; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (dev->bus_reset) - dev->bus_reset = 0; - - portsc1 = readl(&dev->op_regs->portsc1); - devlc = readl(&dev->op_regs->devlc); - dev_vdbg(&dev->pdev->dev, "portsc1 = 0x%08x, devlc = 0x%08x\n", - portsc1, devlc); - - /* bus reset is finished */ - if (!(portsc1 & PORTS_PR)) { - /* get the speed */ - dev->gadget.speed = lpm_device_speed(devlc); - dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n", - dev->gadget.speed); - } - - /* LPM L0 to L1 */ - if (dev->lpm && dev->lpm_state == LPM_L0) - if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) { - dev_info(&dev->pdev->dev, "LPM L0 to L1\n"); - dev->lpm_state = LPM_L1; - } - - /* LPM L1 to L0, force resume or remote wakeup finished */ - if (dev->lpm && dev->lpm_state == LPM_L1) - if (!(portsc1 & PORTS_SUSP)) { - dev_info(&dev->pdev->dev, "LPM L1 to L0\n"); - dev->lpm_state = LPM_L0; - } - - /* update USB state */ - if (!dev->resume_state) - dev->usb_state = USB_STATE_DEFAULT; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* USB reset interrupt handler */ -static void handle_usb_reset(struct langwell_udc *dev) -{ - u32 deviceaddr, - endptsetupstat, - endptcomplete; - unsigned long timeout; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* Write-Clear the device address */ - deviceaddr = readl(&dev->op_regs->deviceaddr); - writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr); - - dev->dev_addr = 0; - - /* clear usb state */ - dev->resume_state = 0; - - /* LPM L1 to L0, reset */ - if (dev->lpm) - dev->lpm_state = LPM_L0; - - dev->ep0_dir = USB_DIR_OUT; - dev->ep0_state = WAIT_FOR_SETUP; - - /* remote wakeup reset to 0 when the device is reset */ - dev->remote_wakeup = 0; - dev->dev_status = 1 << USB_DEVICE_SELF_POWERED; - dev->gadget.b_hnp_enable = 0; - dev->gadget.a_hnp_support = 0; - dev->gadget.a_alt_hnp_support = 0; - - /* Write-Clear all the setup token semaphores */ - endptsetupstat = readl(&dev->op_regs->endptsetupstat); - writel(endptsetupstat, &dev->op_regs->endptsetupstat); - - /* Write-Clear all the endpoint complete status bits */ - endptcomplete = readl(&dev->op_regs->endptcomplete); - writel(endptcomplete, &dev->op_regs->endptcomplete); - - /* wait until all endptprime bits cleared */ - timeout = jiffies + PRIME_TIMEOUT; - while (readl(&dev->op_regs->endptprime)) { - if (time_after(jiffies, timeout)) { - dev_err(&dev->pdev->dev, "USB reset timeout\n"); - break; - } - cpu_relax(); - } - - /* write 1s to endptflush register to clear any primed buffers */ - writel((u32) ~0, &dev->op_regs->endptflush); - - if (readl(&dev->op_regs->portsc1) & PORTS_PR) { - dev_vdbg(&dev->pdev->dev, "USB bus reset\n"); - /* bus is reseting */ - dev->bus_reset = 1; - - /* reset all the queues, stop all USB activities */ - stop_activity(dev); - dev->usb_state = USB_STATE_DEFAULT; - } else { - dev_vdbg(&dev->pdev->dev, "device controller reset\n"); - /* controller reset */ - langwell_udc_reset(dev); - - /* reset all the queues, stop all USB activities */ - stop_activity(dev); - - /* reset ep0 dQH and endptctrl */ - ep0_reset(dev); - - /* enable interrupt and set controller to run state */ - langwell_udc_start(dev); - - dev->usb_state = USB_STATE_ATTACHED; - } - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* USB bus suspend/resume interrupt */ -static void handle_bus_suspend(struct langwell_udc *dev) -{ - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - dev->resume_state = dev->usb_state; - dev->usb_state = USB_STATE_SUSPENDED; - - /* report suspend to the driver */ - if (dev->driver) { - if (dev->driver->suspend) { - spin_unlock(&dev->lock); - dev->driver->suspend(&dev->gadget); - spin_lock(&dev->lock); - dev_dbg(&dev->pdev->dev, "suspend %s\n", - dev->driver->driver.name); - } - } - - /* enter PHY low power suspend */ - if (dev->pdev->device != 0x0829) - langwell_phy_low_power(dev, 0); - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -static void handle_bus_resume(struct langwell_udc *dev) -{ - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - dev->usb_state = dev->resume_state; - dev->resume_state = 0; - - /* exit PHY low power suspend */ - if (dev->pdev->device != 0x0829) - langwell_phy_low_power(dev, 0); - - /* report resume to the driver */ - if (dev->driver) { - if (dev->driver->resume) { - spin_unlock(&dev->lock); - dev->driver->resume(&dev->gadget); - spin_lock(&dev->lock); - dev_dbg(&dev->pdev->dev, "resume %s\n", - dev->driver->driver.name); - } - } - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* USB device controller interrupt handler */ -static irqreturn_t langwell_irq(int irq, void *_dev) -{ - struct langwell_udc *dev = _dev; - u32 usbsts, - usbintr, - irq_sts, - portsc1; - - dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - - if (dev->stopped) { - dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n"); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return IRQ_NONE; - } - - spin_lock(&dev->lock); - - /* USB status */ - usbsts = readl(&dev->op_regs->usbsts); - - /* USB interrupt enable */ - usbintr = readl(&dev->op_regs->usbintr); - - irq_sts = usbsts & usbintr; - dev_vdbg(&dev->pdev->dev, - "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n", - usbsts, usbintr, irq_sts); - - if (!irq_sts) { - dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n"); - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - spin_unlock(&dev->lock); - return IRQ_NONE; - } - - /* Write-Clear interrupt status bits */ - writel(irq_sts, &dev->op_regs->usbsts); - - /* resume from suspend */ - portsc1 = readl(&dev->op_regs->portsc1); - if (dev->usb_state == USB_STATE_SUSPENDED) - if (!(portsc1 & PORTS_SUSP)) - handle_bus_resume(dev); - - /* USB interrupt */ - if (irq_sts & STS_UI) { - dev_vdbg(&dev->pdev->dev, "USB interrupt\n"); - - /* setup packet received from ep0 */ - if (readl(&dev->op_regs->endptsetupstat) - & EP0SETUPSTAT_MASK) { - dev_vdbg(&dev->pdev->dev, - "USB SETUP packet received interrupt\n"); - /* setup tripwire semaphone */ - setup_tripwire(dev); - handle_setup_packet(dev, &dev->local_setup_buff); - } - - /* USB transfer completion */ - if (readl(&dev->op_regs->endptcomplete)) { - dev_vdbg(&dev->pdev->dev, - "USB transfer completion interrupt\n"); - handle_trans_complete(dev); - } - } - - /* SOF received interrupt (for ISO transfer) */ - if (irq_sts & STS_SRI) { - /* FIXME */ - /* dev_vdbg(&dev->pdev->dev, "SOF received interrupt\n"); */ - } - - /* port change detect interrupt */ - if (irq_sts & STS_PCI) { - dev_vdbg(&dev->pdev->dev, "port change detect interrupt\n"); - handle_port_change(dev); - } - - /* suspend interrupt */ - if (irq_sts & STS_SLI) { - dev_vdbg(&dev->pdev->dev, "suspend interrupt\n"); - handle_bus_suspend(dev); - } - - /* USB reset interrupt */ - if (irq_sts & STS_URI) { - dev_vdbg(&dev->pdev->dev, "USB reset interrupt\n"); - handle_usb_reset(dev); - } - - /* USB error or system error interrupt */ - if (irq_sts & (STS_UEI | STS_SEI)) { - /* FIXME */ - dev_warn(&dev->pdev->dev, "error IRQ, irq_sts: %x\n", irq_sts); - } - - spin_unlock(&dev->lock); - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return IRQ_HANDLED; -} - - -/*-------------------------------------------------------------------------*/ - -/* release device structure */ -static void gadget_release(struct device *_dev) -{ - struct langwell_udc *dev = dev_get_drvdata(_dev); - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - complete(dev->done); - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - kfree(dev); -} - - -/* enable SRAM caching if SRAM detected */ -static void sram_init(struct langwell_udc *dev) -{ - struct pci_dev *pdev = dev->pdev; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - dev->sram_addr = pci_resource_start(pdev, 1); - dev->sram_size = pci_resource_len(pdev, 1); - dev_info(&dev->pdev->dev, "Found private SRAM at %x size:%x\n", - dev->sram_addr, dev->sram_size); - dev->got_sram = 1; - - if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) { - dev_warn(&dev->pdev->dev, "SRAM request failed\n"); - dev->got_sram = 0; - } else if (!dma_declare_coherent_memory(&pdev->dev, dev->sram_addr, - dev->sram_addr, dev->sram_size, DMA_MEMORY_MAP)) { - dev_warn(&dev->pdev->dev, "SRAM DMA declare failed\n"); - pci_release_region(pdev, 1); - dev->got_sram = 0; - } - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* release SRAM caching */ -static void sram_deinit(struct langwell_udc *dev) -{ - struct pci_dev *pdev = dev->pdev; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - dma_release_declared_memory(&pdev->dev); - pci_release_region(pdev, 1); - - dev->got_sram = 0; - - dev_info(&dev->pdev->dev, "release SRAM caching\n"); - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - - -/* tear down the binding between this driver and the pci device */ -static void langwell_udc_remove(struct pci_dev *pdev) -{ - struct langwell_udc *dev = pci_get_drvdata(pdev); - - DECLARE_COMPLETION(done); - - BUG_ON(dev->driver); - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - dev->done = &done; - - /* free dTD dma_pool and dQH */ - if (dev->dtd_pool) - dma_pool_destroy(dev->dtd_pool); - - if (dev->ep_dqh) - dma_free_coherent(&pdev->dev, dev->ep_dqh_size, - dev->ep_dqh, dev->ep_dqh_dma); - - /* release SRAM caching */ - if (dev->has_sram && dev->got_sram) - sram_deinit(dev); - - if (dev->status_req) { - kfree(dev->status_req->req.buf); - kfree(dev->status_req); - } - - kfree(dev->ep); - - /* disable IRQ handler */ - if (dev->got_irq) - free_irq(pdev->irq, dev); - - if (dev->cap_regs) - iounmap(dev->cap_regs); - - if (dev->region) - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - - if (dev->enabled) - pci_disable_device(pdev); - - dev->cap_regs = NULL; - - dev_info(&dev->pdev->dev, "unbind\n"); - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - - device_unregister(&dev->gadget.dev); - device_remove_file(&pdev->dev, &dev_attr_langwell_udc); - device_remove_file(&pdev->dev, &dev_attr_remote_wakeup); - - pci_set_drvdata(pdev, NULL); - - /* free dev, wait for the release() finished */ - wait_for_completion(&done); -} - - -/* - * wrap this driver around the specified device, but - * don't respond over USB until a gadget driver binds to us. - */ -static int langwell_udc_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - struct langwell_udc *dev; - unsigned long resource, len; - void __iomem *base = NULL; - size_t size; - int retval; - - /* alloc, and start init */ - dev = kzalloc(sizeof *dev, GFP_KERNEL); - if (dev == NULL) { - retval = -ENOMEM; - goto error; - } - - /* initialize device spinlock */ - spin_lock_init(&dev->lock); - - dev->pdev = pdev; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - pci_set_drvdata(pdev, dev); - - /* now all the pci goodies ... */ - if (pci_enable_device(pdev) < 0) { - retval = -ENODEV; - goto error; - } - dev->enabled = 1; - - /* control register: BAR 0 */ - resource = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - if (!request_mem_region(resource, len, driver_name)) { - dev_err(&dev->pdev->dev, "controller already in use\n"); - retval = -EBUSY; - goto error; - } - dev->region = 1; - - base = ioremap_nocache(resource, len); - if (base == NULL) { - dev_err(&dev->pdev->dev, "can't map memory\n"); - retval = -EFAULT; - goto error; - } - - dev->cap_regs = (struct langwell_cap_regs __iomem *) base; - dev_vdbg(&dev->pdev->dev, "dev->cap_regs: %p\n", dev->cap_regs); - dev->op_regs = (struct langwell_op_regs __iomem *) - (base + OP_REG_OFFSET); - dev_vdbg(&dev->pdev->dev, "dev->op_regs: %p\n", dev->op_regs); - - /* irq setup after old hardware is cleaned up */ - if (!pdev->irq) { - dev_err(&dev->pdev->dev, "No IRQ. Check PCI setup!\n"); - retval = -ENODEV; - goto error; - } - - dev->has_sram = 1; - dev->got_sram = 0; - dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram); - - /* enable SRAM caching if detected */ - if (dev->has_sram && !dev->got_sram) - sram_init(dev); - - dev_info(&dev->pdev->dev, - "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n", - pdev->irq, resource, len, base); - /* enables bus-mastering for device dev */ - pci_set_master(pdev); - - if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, - driver_name, dev) != 0) { - dev_err(&dev->pdev->dev, - "request interrupt %d failed\n", pdev->irq); - retval = -EBUSY; - goto error; - } - dev->got_irq = 1; - - /* set stopped bit */ - dev->stopped = 1; - - /* capabilities and endpoint number */ - dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0; - dev->dciversion = readw(&dev->cap_regs->dciversion); - dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0; - dev_vdbg(&dev->pdev->dev, "dev->lpm: %d\n", dev->lpm); - dev_vdbg(&dev->pdev->dev, "dev->dciversion: 0x%04x\n", - dev->dciversion); - dev_vdbg(&dev->pdev->dev, "dccparams: 0x%08x\n", - readl(&dev->cap_regs->dccparams)); - dev_vdbg(&dev->pdev->dev, "dev->devcap: %d\n", dev->devcap); - if (!dev->devcap) { - dev_err(&dev->pdev->dev, "can't support device mode\n"); - retval = -ENODEV; - goto error; - } - - /* a pair of endpoints (out/in) for each address */ - dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2; - dev_vdbg(&dev->pdev->dev, "dev->ep_max: %d\n", dev->ep_max); - - /* allocate endpoints memory */ - dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max, - GFP_KERNEL); - if (!dev->ep) { - dev_err(&dev->pdev->dev, "allocate endpoints memory failed\n"); - retval = -ENOMEM; - goto error; - } - - /* allocate device dQH memory */ - size = dev->ep_max * sizeof(struct langwell_dqh); - dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size); - if (size < DQH_ALIGNMENT) - size = DQH_ALIGNMENT; - else if ((size % DQH_ALIGNMENT) != 0) { - size += DQH_ALIGNMENT + 1; - size &= ~(DQH_ALIGNMENT - 1); - } - dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size, - &dev->ep_dqh_dma, GFP_KERNEL); - if (!dev->ep_dqh) { - dev_err(&dev->pdev->dev, "allocate dQH memory failed\n"); - retval = -ENOMEM; - goto error; - } - dev->ep_dqh_size = size; - dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size); - - /* initialize ep0 status request structure */ - dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL); - if (!dev->status_req) { - dev_err(&dev->pdev->dev, - "allocate status_req memory failed\n"); - retval = -ENOMEM; - goto error; - } - INIT_LIST_HEAD(&dev->status_req->queue); - - /* allocate a small amount of memory to get valid address */ - dev->status_req->req.buf = kmalloc(8, GFP_KERNEL); - dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf); - - dev->resume_state = USB_STATE_NOTATTACHED; - dev->usb_state = USB_STATE_POWERED; - dev->ep0_dir = USB_DIR_OUT; - - /* remote wakeup reset to 0 when the device is reset */ - dev->remote_wakeup = 0; - dev->dev_status = 1 << USB_DEVICE_SELF_POWERED; - - /* reset device controller */ - langwell_udc_reset(dev); - - /* initialize gadget structure */ - dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */ - dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */ - INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */ - dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ - dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */ - - /* the "gadget" abstracts/virtualizes the controller */ - dev_set_name(&dev->gadget.dev, "gadget"); - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; - dev->gadget.dev.release = gadget_release; - dev->gadget.name = driver_name; /* gadget name */ - - /* controller endpoints reinit */ - eps_reinit(dev); - - /* reset ep0 dQH and endptctrl */ - ep0_reset(dev); - - /* create dTD dma_pool resource */ - dev->dtd_pool = dma_pool_create("langwell_dtd", - &dev->pdev->dev, - sizeof(struct langwell_dtd), - DTD_ALIGNMENT, - DMA_BOUNDARY); - - if (!dev->dtd_pool) { - retval = -ENOMEM; - goto error; - } - - /* done */ - dev_info(&dev->pdev->dev, "%s\n", driver_desc); - dev_info(&dev->pdev->dev, "irq %d, pci mem %p\n", pdev->irq, base); - dev_info(&dev->pdev->dev, "Driver version: " DRIVER_VERSION "\n"); - dev_info(&dev->pdev->dev, "Support (max) %d endpoints\n", dev->ep_max); - dev_info(&dev->pdev->dev, "Device interface version: 0x%04x\n", - dev->dciversion); - dev_info(&dev->pdev->dev, "Controller mode: %s\n", - dev->devcap ? "Device" : "Host"); - dev_info(&dev->pdev->dev, "Support USB LPM: %s\n", - dev->lpm ? "Yes" : "No"); - - dev_vdbg(&dev->pdev->dev, - "After langwell_udc_probe(), print all registers:\n"); - print_all_registers(dev); - - retval = device_register(&dev->gadget.dev); - if (retval) - goto error; - - retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget); - if (retval) - goto error; - - retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc); - if (retval) - goto error; - - retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup); - if (retval) - goto error_attr1; - - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; - -error_attr1: - device_remove_file(&pdev->dev, &dev_attr_langwell_udc); -error: - if (dev) { - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - langwell_udc_remove(pdev); - } - - return retval; -} - - -/* device controller suspend */ -static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct langwell_udc *dev = pci_get_drvdata(pdev); - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - usb_del_gadget_udc(&dev->gadget); - /* disable interrupt and set controller to stop state */ - langwell_udc_stop(dev); - - /* disable IRQ handler */ - if (dev->got_irq) - free_irq(pdev->irq, dev); - dev->got_irq = 0; - - /* save PCI state */ - pci_save_state(pdev); - - spin_lock_irq(&dev->lock); - /* stop all usb activities */ - stop_activity(dev); - spin_unlock_irq(&dev->lock); - - /* free dTD dma_pool and dQH */ - if (dev->dtd_pool) - dma_pool_destroy(dev->dtd_pool); - - if (dev->ep_dqh) - dma_free_coherent(&pdev->dev, dev->ep_dqh_size, - dev->ep_dqh, dev->ep_dqh_dma); - - /* release SRAM caching */ - if (dev->has_sram && dev->got_sram) - sram_deinit(dev); - - /* set device power state */ - pci_set_power_state(pdev, PCI_D3hot); - - /* enter PHY low power suspend */ - if (dev->pdev->device != 0x0829) - langwell_phy_low_power(dev, 1); - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* device controller resume */ -static int langwell_udc_resume(struct pci_dev *pdev) -{ - struct langwell_udc *dev = pci_get_drvdata(pdev); - size_t size; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* exit PHY low power suspend */ - if (dev->pdev->device != 0x0829) - langwell_phy_low_power(dev, 0); - - /* set device D0 power state */ - pci_set_power_state(pdev, PCI_D0); - - /* enable SRAM caching if detected */ - if (dev->has_sram && !dev->got_sram) - sram_init(dev); - - /* allocate device dQH memory */ - size = dev->ep_max * sizeof(struct langwell_dqh); - dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size); - if (size < DQH_ALIGNMENT) - size = DQH_ALIGNMENT; - else if ((size % DQH_ALIGNMENT) != 0) { - size += DQH_ALIGNMENT + 1; - size &= ~(DQH_ALIGNMENT - 1); - } - dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size, - &dev->ep_dqh_dma, GFP_KERNEL); - if (!dev->ep_dqh) { - dev_err(&dev->pdev->dev, "allocate dQH memory failed\n"); - return -ENOMEM; - } - dev->ep_dqh_size = size; - dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size); - - /* create dTD dma_pool resource */ - dev->dtd_pool = dma_pool_create("langwell_dtd", - &dev->pdev->dev, - sizeof(struct langwell_dtd), - DTD_ALIGNMENT, - DMA_BOUNDARY); - - if (!dev->dtd_pool) - return -ENOMEM; - - /* restore PCI state */ - pci_restore_state(pdev); - - /* enable IRQ handler */ - if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, - driver_name, dev) != 0) { - dev_err(&dev->pdev->dev, "request interrupt %d failed\n", - pdev->irq); - return -EBUSY; - } - dev->got_irq = 1; - - /* reset and start controller to run state */ - if (dev->stopped) { - /* reset device controller */ - langwell_udc_reset(dev); - - /* reset ep0 dQH and endptctrl */ - ep0_reset(dev); - - /* start device if gadget is loaded */ - if (dev->driver) - langwell_udc_start(dev); - } - - /* reset USB status */ - dev->usb_state = USB_STATE_ATTACHED; - dev->ep0_state = WAIT_FOR_SETUP; - dev->ep0_dir = USB_DIR_OUT; - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); - return 0; -} - - -/* pci driver shutdown */ -static void langwell_udc_shutdown(struct pci_dev *pdev) -{ - struct langwell_udc *dev = pci_get_drvdata(pdev); - u32 usbmode; - - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - - /* reset controller mode to IDLE */ - usbmode = readl(&dev->op_regs->usbmode); - dev_dbg(&dev->pdev->dev, "usbmode = 0x%08x\n", usbmode); - usbmode &= (~3 | MODE_IDLE); - writel(usbmode, &dev->op_regs->usbmode); - - dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); -} - -/*-------------------------------------------------------------------------*/ - -static const struct pci_device_id pci_ids[] = { { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x8086, - .device = 0x0811, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -}, { /* end: all zeroes */ } -}; - -MODULE_DEVICE_TABLE(pci, pci_ids); - - -static struct pci_driver langwell_pci_driver = { - .name = (char *) driver_name, - .id_table = pci_ids, - - .probe = langwell_udc_probe, - .remove = langwell_udc_remove, - - /* device controller suspend/resume */ - .suspend = langwell_udc_suspend, - .resume = langwell_udc_resume, - - .shutdown = langwell_udc_shutdown, -}; - - -static int __init init(void) -{ - return pci_register_driver(&langwell_pci_driver); -} -module_init(init); - - -static void __exit cleanup(void) -{ - pci_unregister_driver(&langwell_pci_driver); -} -module_exit(cleanup); - - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>"); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h deleted file mode 100644 index 8c8087abb481..000000000000 --- a/drivers/usb/gadget/langwell_udc.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * Intel Langwell USB Device Controller driver - * Copyright (C) 2008-2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - */ - -#include <linux/usb/langwell_udc.h> - -/*-------------------------------------------------------------------------*/ - -/* driver data structures and utilities */ - -/* - * dTD: Device Endpoint Transfer Descriptor - * describe to the device controller the location and quantity of - * data to be send/received for given transfer - */ -struct langwell_dtd { - u32 dtd_next; -/* bits 31:5, next transfer element pointer */ -#define DTD_NEXT(d) (((d)>>5)&0x7ffffff) -#define DTD_NEXT_MASK (0x7ffffff << 5) -/* terminate */ -#define DTD_TERM BIT(0) - /* bits 7:0, execution back states */ - u32 dtd_status:8; -#define DTD_STATUS(d) (((d)>>0)&0xff) -#define DTD_STS_ACTIVE BIT(7) /* active */ -#define DTD_STS_HALTED BIT(6) /* halted */ -#define DTD_STS_DBE BIT(5) /* data buffer error */ -#define DTD_STS_TRE BIT(3) /* transaction error */ - /* bits 9:8 */ - u32 dtd_res0:2; - /* bits 11:10, multipier override */ - u32 dtd_multo:2; -#define DTD_MULTO (BIT(11) | BIT(10)) - /* bits 14:12 */ - u32 dtd_res1:3; - /* bit 15, interrupt on complete */ - u32 dtd_ioc:1; -#define DTD_IOC BIT(15) - /* bits 30:16, total bytes */ - u32 dtd_total:15; -#define DTD_TOTAL(d) (((d)>>16)&0x7fff) -#define DTD_MAX_TRANSFER_LENGTH 0x4000 - /* bit 31 */ - u32 dtd_res2:1; - /* dTD buffer pointer page 0 to 4 */ - u32 dtd_buf[5]; -#define DTD_OFFSET_MASK 0xfff -/* bits 31:12, buffer pointer */ -#define DTD_BUFFER(d) (((d)>>12)&0x3ff) -/* bits 11:0, current offset */ -#define DTD_C_OFFSET(d) (((d)>>0)&0xfff) -/* bits 10:0, frame number */ -#define DTD_FRAME(d) (((d)>>0)&0x7ff) - - /* driver-private parts */ - - /* dtd dma address */ - dma_addr_t dtd_dma; - /* next dtd virtual address */ - struct langwell_dtd *next_dtd_virt; -}; - - -/* - * dQH: Device Endpoint Queue Head - * describe where all transfers are managed - * 48-byte data structure, aligned on 64-byte boundary - * - * These are associated with dTD structure - */ -struct langwell_dqh { - /* endpoint capabilities and characteristics */ - u32 dqh_res0:15; /* bits 14:0 */ - u32 dqh_ios:1; /* bit 15, interrupt on setup */ -#define DQH_IOS BIT(15) - u32 dqh_mpl:11; /* bits 26:16, maximum packet length */ -#define DQH_MPL (0x7ff << 16) - u32 dqh_res1:2; /* bits 28:27 */ - u32 dqh_zlt:1; /* bit 29, zero length termination */ -#define DQH_ZLT BIT(29) - u32 dqh_mult:2; /* bits 31:30 */ -#define DQH_MULT (BIT(30) | BIT(31)) - - /* current dTD pointer */ - u32 dqh_current; /* locate the transfer in progress */ -#define DQH_C_DTD(e) \ - (((e)>>5)&0x7ffffff) /* bits 31:5, current dTD pointer */ - - /* transfer overlay, hardware parts of a struct langwell_dtd */ - u32 dtd_next; - u32 dtd_status:8; /* bits 7:0, execution back states */ - u32 dtd_res0:2; /* bits 9:8 */ - u32 dtd_multo:2; /* bits 11:10, multipier override */ - u32 dtd_res1:3; /* bits 14:12 */ - u32 dtd_ioc:1; /* bit 15, interrupt on complete */ - u32 dtd_total:15; /* bits 30:16, total bytes */ - u32 dtd_res2:1; /* bit 31 */ - u32 dtd_buf[5]; /* dTD buffer pointer page 0 to 4 */ - - u32 dqh_res2; - struct usb_ctrlrequest dqh_setup; /* setup packet buffer */ -} __attribute__ ((aligned(64))); - - -/* endpoint data structure */ -struct langwell_ep { - struct usb_ep ep; - dma_addr_t dma; - struct langwell_udc *dev; - unsigned long irqs; - struct list_head queue; - struct langwell_dqh *dqh; - const struct usb_endpoint_descriptor *desc; - char name[14]; - unsigned stopped:1, - ep_type:2, - ep_num:8; -}; - - -/* request data structure */ -struct langwell_request { - struct usb_request req; - struct langwell_dtd *dtd, *head, *tail; - struct langwell_ep *ep; - dma_addr_t dtd_dma; - struct list_head queue; - unsigned dtd_count; - unsigned mapped:1; -}; - - -/* ep0 transfer state */ -enum ep0_state { - WAIT_FOR_SETUP, - DATA_STATE_XMIT, - DATA_STATE_NEED_ZLP, - WAIT_FOR_OUT_STATUS, - DATA_STATE_RECV, -}; - - -/* device suspend state */ -enum lpm_state { - LPM_L0, /* on */ - LPM_L1, /* LPM L1 sleep */ - LPM_L2, /* suspend */ - LPM_L3, /* off */ -}; - - -/* device data structure */ -struct langwell_udc { - /* each pci device provides one gadget, several endpoints */ - struct usb_gadget gadget; - spinlock_t lock; /* device lock */ - struct langwell_ep *ep; - struct usb_gadget_driver *driver; - struct usb_phy *transceiver; - u8 dev_addr; - u32 usb_state; - u32 resume_state; - u32 bus_reset; - enum lpm_state lpm_state; - enum ep0_state ep0_state; - u32 ep0_dir; - u16 dciversion; - unsigned ep_max; - unsigned devcap:1, - enabled:1, - region:1, - got_irq:1, - powered:1, - remote_wakeup:1, - rate:1, - is_reset:1, - softconnected:1, - vbus_active:1, - suspended:1, - stopped:1, - lpm:1, /* LPM capability */ - has_sram:1, /* SRAM caching */ - got_sram:1; - - /* pci state used to access those endpoints */ - struct pci_dev *pdev; - - /* Langwell otg transceiver */ - struct langwell_otg *lotg; - - /* control registers */ - struct langwell_cap_regs __iomem *cap_regs; - struct langwell_op_regs __iomem *op_regs; - - struct usb_ctrlrequest local_setup_buff; - struct langwell_dqh *ep_dqh; - size_t ep_dqh_size; - dma_addr_t ep_dqh_dma; - - /* ep0 status request */ - struct langwell_request *status_req; - - /* dma pool */ - struct dma_pool *dtd_pool; - - /* make sure release() is done */ - struct completion *done; - - /* for private SRAM caching */ - unsigned int sram_addr; - unsigned int sram_size; - - /* device status data for get_status request */ - u16 dev_status; -}; - -#define gadget_to_langwell(g) container_of((g), struct langwell_udc, gadget) - diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c new file mode 100644 index 000000000000..2ab0388d93eb --- /dev/null +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -0,0 +1,3539 @@ +/* + * USB Gadget driver for LPC32xx + * + * Authors: + * Kevin Wells <kevin.wells@nxp.com> + * Mike James + * Roland Stigge <stigge@antcom.de> + * + * Copyright (C) 2006 Philips Semiconductors + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2012 Roland Stigge + * + * Note: This driver is based on original work done by Mike James for + * the LPC3180. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/clk.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/i2c.h> +#include <linux/kthread.h> +#include <linux/freezer.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/workqueue.h> +#include <linux/of.h> +#include <linux/usb/isp1301.h> + +#include <asm/byteorder.h> +#include <mach/hardware.h> +#include <linux/io.h> +#include <asm/irq.h> +#include <asm/system.h> + +#include <mach/platform.h> +#include <mach/irqs.h> +#include <mach/board.h> +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#endif + +/* + * USB device configuration structure + */ +typedef void (*usc_chg_event)(int); +struct lpc32xx_usbd_cfg { + int vbus_drv_pol; /* 0=active low drive for VBUS via ISP1301 */ + usc_chg_event conn_chgb; /* Connection change event (optional) */ + usc_chg_event susp_chgb; /* Suspend/resume event (optional) */ + usc_chg_event rmwk_chgb; /* Enable/disable remote wakeup */ +}; + +/* + * controller driver data structures + */ + +/* 16 endpoints (not to be confused with 32 hardware endpoints) */ +#define NUM_ENDPOINTS 16 + +/* + * IRQ indices make reading the code a little easier + */ +#define IRQ_USB_LP 0 +#define IRQ_USB_HP 1 +#define IRQ_USB_DEVDMA 2 +#define IRQ_USB_ATX 3 + +#define EP_OUT 0 /* RX (from host) */ +#define EP_IN 1 /* TX (to host) */ + +/* Returns the interrupt mask for the selected hardware endpoint */ +#define EP_MASK_SEL(ep, dir) (1 << (((ep) * 2) + dir)) + +#define EP_INT_TYPE 0 +#define EP_ISO_TYPE 1 +#define EP_BLK_TYPE 2 +#define EP_CTL_TYPE 3 + +/* EP0 states */ +#define WAIT_FOR_SETUP 0 /* Wait for setup packet */ +#define DATA_IN 1 /* Expect dev->host transfer */ +#define DATA_OUT 2 /* Expect host->dev transfer */ + +/* DD (DMA Descriptor) structure, requires word alignment, this is already + * defined in the LPC32XX USB device header file, but this version is slightly + * modified to tag some work data with each DMA descriptor. */ +struct lpc32xx_usbd_dd_gad { + u32 dd_next_phy; + u32 dd_setup; + u32 dd_buffer_addr; + u32 dd_status; + u32 dd_iso_ps_mem_addr; + u32 this_dma; + u32 iso_status[6]; /* 5 spare */ + u32 dd_next_v; +}; + +/* + * Logical endpoint structure + */ +struct lpc32xx_ep { + struct usb_ep ep; + struct list_head queue; + struct lpc32xx_udc *udc; + + u32 hwep_num_base; /* Physical hardware EP */ + u32 hwep_num; /* Maps to hardware endpoint */ + u32 maxpacket; + u32 lep; + + bool is_in; + bool req_pending; + u32 eptype; + + u32 totalints; + + bool wedge; + + const struct usb_endpoint_descriptor *desc; +}; + +/* + * Common UDC structure + */ +struct lpc32xx_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct platform_device *pdev; + struct device *dev; + struct dentry *pde; + spinlock_t lock; + struct i2c_client *isp1301_i2c_client; + + /* Board and device specific */ + struct lpc32xx_usbd_cfg *board; + u32 io_p_start; + u32 io_p_size; + void __iomem *udp_baseaddr; + int udp_irq[4]; + struct clk *usb_pll_clk; + struct clk *usb_slv_clk; + + /* DMA support */ + u32 *udca_v_base; + u32 udca_p_base; + struct dma_pool *dd_cache; + + /* Common EP and control data */ + u32 enabled_devints; + u32 enabled_hwepints; + u32 dev_status; + u32 realized_eps; + + /* VBUS detection, pullup, and power flags */ + u8 vbus; + u8 last_vbus; + int pullup; + int poweron; + + /* Work queues related to I2C support */ + struct work_struct pullup_job; + struct work_struct vbus_job; + struct work_struct power_job; + + /* USB device peripheral - various */ + struct lpc32xx_ep ep[NUM_ENDPOINTS]; + bool enabled; + bool clocked; + bool suspended; + bool selfpowered; + int ep0state; + atomic_t enabled_ep_cnt; + wait_queue_head_t ep_disable_wait_queue; +}; + +/* + * Endpoint request + */ +struct lpc32xx_request { + struct usb_request req; + struct list_head queue; + struct lpc32xx_usbd_dd_gad *dd_desc_ptr; + bool mapped; + bool send_zlp; +}; + +static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g) +{ + return container_of(g, struct lpc32xx_udc, gadget); +} + +#define ep_dbg(epp, fmt, arg...) \ + dev_dbg(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_err(epp, fmt, arg...) \ + dev_err(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_info(epp, fmt, arg...) \ + dev_info(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_warn(epp, fmt, arg...) \ + dev_warn(epp->udc->dev, "%s:" fmt, __func__, ## arg) + +#define UDCA_BUFF_SIZE (128) + +/* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will + * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL() + * */ +#define USB_CTRL IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64) +#define USB_CLOCK_MASK (AHB_M_CLOCK_ON | OTG_CLOCK_ON | \ + DEV_CLOCK_ON | I2C_CLOCK_ON) + +/* USB_CTRL bit defines */ +#define USB_SLAVE_HCLK_EN (1 << 24) +#define USB_HOST_NEED_CLK_EN (1 << 21) +#define USB_DEV_NEED_CLK_EN (1 << 22) + +#define USB_OTG_CLK_CTRL(udc) ((udc)->udp_baseaddr + 0xFF4) +#define USB_OTG_CLK_STAT(udc) ((udc)->udp_baseaddr + 0xFF8) + +/* USB_OTG_CLK_CTRL bit defines */ +#define AHB_M_CLOCK_ON (1 << 4) +#define OTG_CLOCK_ON (1 << 3) +#define I2C_CLOCK_ON (1 << 2) +#define DEV_CLOCK_ON (1 << 1) +#define HOST_CLOCK_ON (1 << 0) + +#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110) + +/* USB_OTG_STAT_CONTROL bit defines */ +#define TRANSPARENT_I2C_EN (1 << 7) +#define HOST_EN (1 << 0) + +/********************************************************************** + * USB device controller register offsets + **********************************************************************/ + +#define USBD_DEVINTST(x) ((x) + 0x200) +#define USBD_DEVINTEN(x) ((x) + 0x204) +#define USBD_DEVINTCLR(x) ((x) + 0x208) +#define USBD_DEVINTSET(x) ((x) + 0x20C) +#define USBD_CMDCODE(x) ((x) + 0x210) +#define USBD_CMDDATA(x) ((x) + 0x214) +#define USBD_RXDATA(x) ((x) + 0x218) +#define USBD_TXDATA(x) ((x) + 0x21C) +#define USBD_RXPLEN(x) ((x) + 0x220) +#define USBD_TXPLEN(x) ((x) + 0x224) +#define USBD_CTRL(x) ((x) + 0x228) +#define USBD_DEVINTPRI(x) ((x) + 0x22C) +#define USBD_EPINTST(x) ((x) + 0x230) +#define USBD_EPINTEN(x) ((x) + 0x234) +#define USBD_EPINTCLR(x) ((x) + 0x238) +#define USBD_EPINTSET(x) ((x) + 0x23C) +#define USBD_EPINTPRI(x) ((x) + 0x240) +#define USBD_REEP(x) ((x) + 0x244) +#define USBD_EPIND(x) ((x) + 0x248) +#define USBD_EPMAXPSIZE(x) ((x) + 0x24C) +/* DMA support registers only below */ +/* Set, clear, or get enabled state of the DMA request status. If + * enabled, an IN or OUT token will start a DMA transfer for the EP */ +#define USBD_DMARST(x) ((x) + 0x250) +#define USBD_DMARCLR(x) ((x) + 0x254) +#define USBD_DMARSET(x) ((x) + 0x258) +/* DMA UDCA head pointer */ +#define USBD_UDCAH(x) ((x) + 0x280) +/* EP DMA status, enable, and disable. This is used to specifically + * enabled or disable DMA for a specific EP */ +#define USBD_EPDMAST(x) ((x) + 0x284) +#define USBD_EPDMAEN(x) ((x) + 0x288) +#define USBD_EPDMADIS(x) ((x) + 0x28C) +/* DMA master interrupts enable and pending interrupts */ +#define USBD_DMAINTST(x) ((x) + 0x290) +#define USBD_DMAINTEN(x) ((x) + 0x294) +/* DMA end of transfer interrupt enable, disable, status */ +#define USBD_EOTINTST(x) ((x) + 0x2A0) +#define USBD_EOTINTCLR(x) ((x) + 0x2A4) +#define USBD_EOTINTSET(x) ((x) + 0x2A8) +/* New DD request interrupt enable, disable, status */ +#define USBD_NDDRTINTST(x) ((x) + 0x2AC) +#define USBD_NDDRTINTCLR(x) ((x) + 0x2B0) +#define USBD_NDDRTINTSET(x) ((x) + 0x2B4) +/* DMA error interrupt enable, disable, status */ +#define USBD_SYSERRTINTST(x) ((x) + 0x2B8) +#define USBD_SYSERRTINTCLR(x) ((x) + 0x2BC) +#define USBD_SYSERRTINTSET(x) ((x) + 0x2C0) + +/********************************************************************** + * USBD_DEVINTST/USBD_DEVINTEN/USBD_DEVINTCLR/USBD_DEVINTSET/ + * USBD_DEVINTPRI register definitions + **********************************************************************/ +#define USBD_ERR_INT (1 << 9) +#define USBD_EP_RLZED (1 << 8) +#define USBD_TXENDPKT (1 << 7) +#define USBD_RXENDPKT (1 << 6) +#define USBD_CDFULL (1 << 5) +#define USBD_CCEMPTY (1 << 4) +#define USBD_DEV_STAT (1 << 3) +#define USBD_EP_SLOW (1 << 2) +#define USBD_EP_FAST (1 << 1) +#define USBD_FRAME (1 << 0) + +/********************************************************************** + * USBD_EPINTST/USBD_EPINTEN/USBD_EPINTCLR/USBD_EPINTSET/ + * USBD_EPINTPRI register definitions + **********************************************************************/ +/* End point selection macro (RX) */ +#define USBD_RX_EP_SEL(e) (1 << ((e) << 1)) + +/* End point selection macro (TX) */ +#define USBD_TX_EP_SEL(e) (1 << (((e) << 1) + 1)) + +/********************************************************************** + * USBD_REEP/USBD_DMARST/USBD_DMARCLR/USBD_DMARSET/USBD_EPDMAST/ + * USBD_EPDMAEN/USBD_EPDMADIS/ + * USBD_NDDRTINTST/USBD_NDDRTINTCLR/USBD_NDDRTINTSET/ + * USBD_EOTINTST/USBD_EOTINTCLR/USBD_EOTINTSET/ + * USBD_SYSERRTINTST/USBD_SYSERRTINTCLR/USBD_SYSERRTINTSET + * register definitions + **********************************************************************/ +/* Endpoint selection macro */ +#define USBD_EP_SEL(e) (1 << (e)) + +/********************************************************************** + * SBD_DMAINTST/USBD_DMAINTEN + **********************************************************************/ +#define USBD_SYS_ERR_INT (1 << 2) +#define USBD_NEW_DD_INT (1 << 1) +#define USBD_EOT_INT (1 << 0) + +/********************************************************************** + * USBD_RXPLEN register definitions + **********************************************************************/ +#define USBD_PKT_RDY (1 << 11) +#define USBD_DV (1 << 10) +#define USBD_PK_LEN_MASK 0x3FF + +/********************************************************************** + * USBD_CTRL register definitions + **********************************************************************/ +#define USBD_LOG_ENDPOINT(e) ((e) << 2) +#define USBD_WR_EN (1 << 1) +#define USBD_RD_EN (1 << 0) + +/********************************************************************** + * USBD_CMDCODE register definitions + **********************************************************************/ +#define USBD_CMD_CODE(c) ((c) << 16) +#define USBD_CMD_PHASE(p) ((p) << 8) + +/********************************************************************** + * USBD_DMARST/USBD_DMARCLR/USBD_DMARSET register definitions + **********************************************************************/ +#define USBD_DMAEP(e) (1 << (e)) + +/* DD (DMA Descriptor) structure, requires word alignment */ +struct lpc32xx_usbd_dd { + u32 *dd_next; + u32 dd_setup; + u32 dd_buffer_addr; + u32 dd_status; + u32 dd_iso_ps_mem_addr; +}; + +/* dd_setup bit defines */ +#define DD_SETUP_ATLE_DMA_MODE 0x01 +#define DD_SETUP_NEXT_DD_VALID 0x04 +#define DD_SETUP_ISO_EP 0x10 +#define DD_SETUP_PACKETLEN(n) (((n) & 0x7FF) << 5) +#define DD_SETUP_DMALENBYTES(n) (((n) & 0xFFFF) << 16) + +/* dd_status bit defines */ +#define DD_STATUS_DD_RETIRED 0x01 +#define DD_STATUS_STS_MASK 0x1E +#define DD_STATUS_STS_NS 0x00 /* Not serviced */ +#define DD_STATUS_STS_BS 0x02 /* Being serviced */ +#define DD_STATUS_STS_NC 0x04 /* Normal completion */ +#define DD_STATUS_STS_DUR 0x06 /* Data underrun (short packet) */ +#define DD_STATUS_STS_DOR 0x08 /* Data overrun */ +#define DD_STATUS_STS_SE 0x12 /* System error */ +#define DD_STATUS_PKT_VAL 0x20 /* Packet valid */ +#define DD_STATUS_LSB_EX 0x40 /* LS byte extracted (ATLE) */ +#define DD_STATUS_MSB_EX 0x80 /* MS byte extracted (ATLE) */ +#define DD_STATUS_MLEN(n) (((n) >> 8) & 0x3F) +#define DD_STATUS_CURDMACNT(n) (((n) >> 16) & 0xFFFF) + +/* + * + * Protocol engine bits below + * + */ +/* Device Interrupt Bit Definitions */ +#define FRAME_INT 0x00000001 +#define EP_FAST_INT 0x00000002 +#define EP_SLOW_INT 0x00000004 +#define DEV_STAT_INT 0x00000008 +#define CCEMTY_INT 0x00000010 +#define CDFULL_INT 0x00000020 +#define RxENDPKT_INT 0x00000040 +#define TxENDPKT_INT 0x00000080 +#define EP_RLZED_INT 0x00000100 +#define ERR_INT 0x00000200 + +/* Rx & Tx Packet Length Definitions */ +#define PKT_LNGTH_MASK 0x000003FF +#define PKT_DV 0x00000400 +#define PKT_RDY 0x00000800 + +/* USB Control Definitions */ +#define CTRL_RD_EN 0x00000001 +#define CTRL_WR_EN 0x00000002 + +/* Command Codes */ +#define CMD_SET_ADDR 0x00D00500 +#define CMD_CFG_DEV 0x00D80500 +#define CMD_SET_MODE 0x00F30500 +#define CMD_RD_FRAME 0x00F50500 +#define DAT_RD_FRAME 0x00F50200 +#define CMD_RD_TEST 0x00FD0500 +#define DAT_RD_TEST 0x00FD0200 +#define CMD_SET_DEV_STAT 0x00FE0500 +#define CMD_GET_DEV_STAT 0x00FE0500 +#define DAT_GET_DEV_STAT 0x00FE0200 +#define CMD_GET_ERR_CODE 0x00FF0500 +#define DAT_GET_ERR_CODE 0x00FF0200 +#define CMD_RD_ERR_STAT 0x00FB0500 +#define DAT_RD_ERR_STAT 0x00FB0200 +#define DAT_WR_BYTE(x) (0x00000100 | ((x) << 16)) +#define CMD_SEL_EP(x) (0x00000500 | ((x) << 16)) +#define DAT_SEL_EP(x) (0x00000200 | ((x) << 16)) +#define CMD_SEL_EP_CLRI(x) (0x00400500 | ((x) << 16)) +#define DAT_SEL_EP_CLRI(x) (0x00400200 | ((x) << 16)) +#define CMD_SET_EP_STAT(x) (0x00400500 | ((x) << 16)) +#define CMD_CLR_BUF 0x00F20500 +#define DAT_CLR_BUF 0x00F20200 +#define CMD_VALID_BUF 0x00FA0500 + +/* Device Address Register Definitions */ +#define DEV_ADDR_MASK 0x7F +#define DEV_EN 0x80 + +/* Device Configure Register Definitions */ +#define CONF_DVICE 0x01 + +/* Device Mode Register Definitions */ +#define AP_CLK 0x01 +#define INAK_CI 0x02 +#define INAK_CO 0x04 +#define INAK_II 0x08 +#define INAK_IO 0x10 +#define INAK_BI 0x20 +#define INAK_BO 0x40 + +/* Device Status Register Definitions */ +#define DEV_CON 0x01 +#define DEV_CON_CH 0x02 +#define DEV_SUS 0x04 +#define DEV_SUS_CH 0x08 +#define DEV_RST 0x10 + +/* Error Code Register Definitions */ +#define ERR_EC_MASK 0x0F +#define ERR_EA 0x10 + +/* Error Status Register Definitions */ +#define ERR_PID 0x01 +#define ERR_UEPKT 0x02 +#define ERR_DCRC 0x04 +#define ERR_TIMOUT 0x08 +#define ERR_EOP 0x10 +#define ERR_B_OVRN 0x20 +#define ERR_BTSTF 0x40 +#define ERR_TGL 0x80 + +/* Endpoint Select Register Definitions */ +#define EP_SEL_F 0x01 +#define EP_SEL_ST 0x02 +#define EP_SEL_STP 0x04 +#define EP_SEL_PO 0x08 +#define EP_SEL_EPN 0x10 +#define EP_SEL_B_1_FULL 0x20 +#define EP_SEL_B_2_FULL 0x40 + +/* Endpoint Status Register Definitions */ +#define EP_STAT_ST 0x01 +#define EP_STAT_DA 0x20 +#define EP_STAT_RF_MO 0x40 +#define EP_STAT_CND_ST 0x80 + +/* Clear Buffer Register Definitions */ +#define CLR_BUF_PO 0x01 + +/* DMA Interrupt Bit Definitions */ +#define EOT_INT 0x01 +#define NDD_REQ_INT 0x02 +#define SYS_ERR_INT 0x04 + +#define DRIVER_VERSION "1.03" +static const char driver_name[] = "lpc32xx_udc"; + +/* + * + * proc interface support + * + */ +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +static char *epnames[] = {"INT", "ISO", "BULK", "CTRL"}; +static const char debug_filename[] = "driver/udc"; + +static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + + seq_printf(s, "\n"); + seq_printf(s, "%12s, maxpacket %4d %3s", + ep->ep.name, ep->ep.maxpacket, + ep->is_in ? "in" : "out"); + seq_printf(s, " type %4s", epnames[ep->eptype]); + seq_printf(s, " ints: %12d", ep->totalints); + + if (list_empty(&ep->queue)) + seq_printf(s, "\t(queue empty)\n"); + else { + list_for_each_entry(req, &ep->queue, queue) { + u32 length = req->req.actual; + + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, length, + req->req.length, req->req.buf); + } + } +} + +static int proc_udc_show(struct seq_file *s, void *unused) +{ + struct lpc32xx_udc *udc = s->private; + struct lpc32xx_ep *ep; + unsigned long flags; + + seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION); + + spin_lock_irqsave(&udc->lock, flags); + + seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n", + udc->vbus ? "present" : "off", + udc->enabled ? (udc->vbus ? "active" : "enabled") : + "disabled", + udc->selfpowered ? "self" : "VBUS", + udc->suspended ? ", suspended" : "", + udc->driver ? udc->driver->driver.name : "(none)"); + + if (udc->enabled && udc->vbus) { + proc_ep_show(s, &udc->ep[0]); + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + if (ep->desc) + proc_ep_show(s, ep); + } + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int proc_udc_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_udc_show, PDE(inode)->data); +} + +static const struct file_operations proc_ops = { + .owner = THIS_MODULE, + .open = proc_udc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void create_debug_file(struct lpc32xx_udc *udc) +{ + udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &proc_ops); +} + +static void remove_debug_file(struct lpc32xx_udc *udc) +{ + if (udc->pde) + debugfs_remove(udc->pde); +} + +#else +static inline void create_debug_file(struct lpc32xx_udc *udc) {} +static inline void remove_debug_file(struct lpc32xx_udc *udc) {} +#endif + +/* Primary initialization sequence for the ISP1301 transceiver */ +static void isp1301_udc_configure(struct lpc32xx_udc *udc) +{ + /* LPC32XX only supports DAT_SE0 USB mode */ + /* This sequence is important */ + + /* Disable transparent UART mode first */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + MC1_UART_EN); + + /* Set full speed and SE0 mode */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, (MC1_SPEED_REG | MC1_DAT_SE0)); + + /* + * The PSW_OE enable bit state is reversed in the ISP1301 User's Guide + */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_SPD_SUSP_CTRL)); + + /* Driver VBUS_DRV high or low depending on board setup */ + if (udc->board->vbus_drv_pol != 0) + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV); + else + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DRV); + + /* Bi-directional mode with suspend control + * Enable both pulldowns for now - the pullup will be enable when VBUS + * is detected */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, + (0 | OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + + /* Discharge VBUS (just in case) */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG); + msleep(1); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + OTG1_VBUS_DISCHRG); + + /* Clear and enable VBUS high edge interrupt */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING, INT_VBUS_VLD); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD); + + /* Enable usb_need_clk clock after transceiver is initialized */ + writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL); + + dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", + i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00)); + dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n", + i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02)); + dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n", + i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14)); +} + +/* Enables or disables the USB device pullup via the ISP1301 transceiver */ +static void isp1301_pullup_set(struct lpc32xx_udc *udc) +{ + if (udc->pullup) + /* Enable pullup for bus signalling */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_DP_PULLUP); + else + /* Enable pullup for bus signalling */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_DP_PULLUP); +} + +static void pullup_work(struct work_struct *work) +{ + struct lpc32xx_udc *udc = + container_of(work, struct lpc32xx_udc, pullup_job); + + isp1301_pullup_set(udc); +} + +static void isp1301_pullup_enable(struct lpc32xx_udc *udc, int en_pullup, + int block) +{ + if (en_pullup == udc->pullup) + return; + + udc->pullup = en_pullup; + if (block) + isp1301_pullup_set(udc); + else + /* defer slow i2c pull up setting */ + schedule_work(&udc->pullup_job); +} + +#ifdef CONFIG_PM +/* Powers up or down the ISP1301 transceiver */ +static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable) +{ + if (enable != 0) + /* Power up ISP1301 - this ISP1301 will automatically wakeup + when VBUS is detected */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR, + MC2_GLOBAL_PWR_DN); + else + /* Power down ISP1301 */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); +} + +static void power_work(struct work_struct *work) +{ + struct lpc32xx_udc *udc = + container_of(work, struct lpc32xx_udc, power_job); + + isp1301_set_powerstate(udc, udc->poweron); +} +#endif + +/* + * + * USB protocol engine command/data read/write helper functions + * + */ +/* Issues a single command to the USB device state machine */ +static void udc_protocol_cmd_w(struct lpc32xx_udc *udc, u32 cmd) +{ + u32 pass = 0; + int to; + + /* EP may lock on CLRI if this read isn't done */ + u32 tmp = readl(USBD_DEVINTST(udc->udp_baseaddr)); + (void) tmp; + + while (pass == 0) { + writel(USBD_CCEMPTY, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Write command code */ + writel(cmd, USBD_CMDCODE(udc->udp_baseaddr)); + to = 10000; + while (((readl(USBD_DEVINTST(udc->udp_baseaddr)) & + USBD_CCEMPTY) == 0) && (to > 0)) { + to--; + } + + if (to > 0) + pass = 1; + + cpu_relax(); + } +} + +/* Issues 2 commands (or command and data) to the USB device state machine */ +static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd, + u32 data) +{ + udc_protocol_cmd_w(udc, cmd); + udc_protocol_cmd_w(udc, data); +} + +/* Issues a single command to the USB device state machine and reads + * response data */ +static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd) +{ + u32 tmp; + int to = 1000; + + /* Write a command and read data from the protocol engine */ + writel((USBD_CDFULL | USBD_CCEMPTY), + USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Write command code */ + udc_protocol_cmd_w(udc, cmd); + + tmp = readl(USBD_DEVINTST(udc->udp_baseaddr)); + while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL)) + && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, + "Protocol engine didn't receive response (CDFULL)\n"); + + return readl(USBD_CMDDATA(udc->udp_baseaddr)); +} + +/* + * + * USB device interrupt mask support functions + * + */ +/* Enable one or more USB device interrupts */ +static inline void uda_enable_devint(struct lpc32xx_udc *udc, u32 devmask) +{ + udc->enabled_devints |= devmask; + writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr)); +} + +/* Disable one or more USB device interrupts */ +static inline void uda_disable_devint(struct lpc32xx_udc *udc, u32 mask) +{ + udc->enabled_devints &= ~mask; + writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr)); +} + +/* Clear one or more USB device interrupts */ +static inline void uda_clear_devint(struct lpc32xx_udc *udc, u32 mask) +{ + writel(mask, USBD_DEVINTCLR(udc->udp_baseaddr)); +} + +/* + * + * Endpoint interrupt disable/enable functions + * + */ +/* Enable one or more USB endpoint interrupts */ +static void uda_enable_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->enabled_hwepints |= (1 << hwep); + writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr)); +} + +/* Disable one or more USB endpoint interrupts */ +static void uda_disable_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->enabled_hwepints &= ~(1 << hwep); + writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr)); +} + +/* Clear one or more USB endpoint interrupts */ +static inline void uda_clear_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPINTCLR(udc->udp_baseaddr)); +} + +/* Enable DMA for the HW channel */ +static inline void udc_ep_dma_enable(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPDMAEN(udc->udp_baseaddr)); +} + +/* Disable DMA for the HW channel */ +static inline void udc_ep_dma_disable(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPDMADIS(udc->udp_baseaddr)); +} + +/* + * + * Endpoint realize/unrealize functions + * + */ +/* Before an endpoint can be used, it needs to be realized + * in the USB protocol engine - this realizes the endpoint. + * The interrupt (FIFO or DMA) is not enabled with this function */ +static void udc_realize_hwep(struct lpc32xx_udc *udc, u32 hwep, + u32 maxpacket) +{ + int to = 1000; + + writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr)); + writel(hwep, USBD_EPIND(udc->udp_baseaddr)); + udc->realized_eps |= (1 << hwep); + writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr)); + writel(maxpacket, USBD_EPMAXPSIZE(udc->udp_baseaddr)); + + /* Wait until endpoint is realized in hardware */ + while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & + USBD_EP_RLZED)) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "EP not correctly realized in hardware\n"); + + writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr)); +} + +/* Unrealize an EP */ +static void udc_unrealize_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->realized_eps &= ~(1 << hwep); + writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr)); +} + +/* + * + * Endpoint support functions + * + */ +/* Select and clear endpoint interrupt */ +static u32 udc_selep_clrint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_w(udc, CMD_SEL_EP_CLRI(hwep)); + return udc_protocol_cmd_r(udc, DAT_SEL_EP_CLRI(hwep)); +} + +/* Disables the endpoint in the USB protocol engine */ +static void udc_disable_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(EP_STAT_DA)); +} + +/* Stalls the endpoint - endpoint will return STALL */ +static void udc_stall_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(EP_STAT_ST)); +} + +/* Clear stall or reset endpoint */ +static void udc_clrstall_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(0)); +} + +/* Select an endpoint for endpoint status, clear, validate */ +static void udc_select_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_w(udc, CMD_SEL_EP(hwep)); +} + +/* + * + * Endpoint buffer management functions + * + */ +/* Clear the current endpoint's buffer */ +static void udc_clr_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_select_hwep(udc, hwep); + udc_protocol_cmd_w(udc, CMD_CLR_BUF); +} + +/* Validate the current endpoint's buffer */ +static void udc_val_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_select_hwep(udc, hwep); + udc_protocol_cmd_w(udc, CMD_VALID_BUF); +} + +static inline u32 udc_clearep_getsts(struct lpc32xx_udc *udc, u32 hwep) +{ + /* Clear EP interrupt */ + uda_clear_hwepint(udc, hwep); + return udc_selep_clrint(udc, hwep); +} + +/* + * + * USB EP DMA support + * + */ +/* Allocate a DMA Descriptor */ +static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc) +{ + dma_addr_t dma; + struct lpc32xx_usbd_dd_gad *dd; + + dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc( + udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma); + if (dd) + dd->this_dma = dma; + + return dd; +} + +/* Free a DMA Descriptor */ +static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd) +{ + dma_pool_free(udc->dd_cache, dd, dd->this_dma); +} + +/* + * + * USB setup and shutdown functions + * + */ +/* Enables or disables most of the USB system clocks when low power mode is + * needed. Clocks are typically started on a connection event, and disabled + * when a cable is disconnected */ +#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON) +static void udc_clk_set(struct lpc32xx_udc *udc, int enable) +{ + int to = 1000; + + if (enable != 0) { + if (udc->clocked) + return; + + udc->clocked = 1; + + /* 48MHz PLL up */ + clk_enable(udc->usb_pll_clk); + + /* Enable the USB device clock */ + writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, + USB_CTRL); + + /* Set to enable all needed USB OTG clocks */ + writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); + + while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != + USB_CLOCK_MASK) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n"); + } else { + if (!udc->clocked) + return; + + udc->clocked = 0; + + /* Never disable the USB_HCLK during normal operation */ + + /* 48MHz PLL dpwn */ + clk_disable(udc->usb_pll_clk); + + /* Enable the USB device clock */ + writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN, + USB_CTRL); + + /* Set to enable all needed USB OTG clocks */ + writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc)); + + while (((readl(USB_OTG_CLK_STAT(udc)) & + OTGOFF_CLK_MASK) != + OTGOFF_CLK_MASK) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n"); + } +} + +/* Set/reset USB device address */ +static void udc_set_address(struct lpc32xx_udc *udc, u32 addr) +{ + /* Address will be latched at the end of the status phase, or + latched immediately if function is called twice */ + udc_protocol_cmd_data_w(udc, CMD_SET_ADDR, + DAT_WR_BYTE(DEV_EN | addr)); +} + +/* Setup up a IN request for DMA transfer - this consists of determining the + * list of DMA addresses for the transfer, allocating DMA Descriptors, + * installing the DD into the UDCA, and then enabling the DMA for that EP */ +static int udc_ep_in_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + u32 hwep = ep->hwep_num; + + ep->req_pending = 1; + + /* There will always be a request waiting here */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + + /* Place the DD Descriptor into the UDCA */ + udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma; + + /* Enable DMA and interrupt for the HW EP */ + udc_ep_dma_enable(udc, hwep); + + /* Clear ZLP if last packet is not of MAXP size */ + if (req->req.length % ep->ep.maxpacket) + req->send_zlp = 0; + + return 0; +} + +/* Setup up a OUT request for DMA transfer - this consists of determining the + * list of DMA addresses for the transfer, allocating DMA Descriptors, + * installing the DD into the UDCA, and then enabling the DMA for that EP */ +static int udc_ep_out_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + u32 hwep = ep->hwep_num; + + ep->req_pending = 1; + + /* There will always be a request waiting here */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + + /* Place the DD Descriptor into the UDCA */ + udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma; + + /* Enable DMA and interrupt for the HW EP */ + udc_ep_dma_enable(udc, hwep); + return 0; +} + +static void udc_disable(struct lpc32xx_udc *udc) +{ + u32 i; + + /* Disable device */ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0)); + udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(0)); + + /* Disable all device interrupts (including EP0) */ + uda_disable_devint(udc, 0x3FF); + + /* Disable and reset all endpoint interrupts */ + for (i = 0; i < 32; i++) { + uda_disable_hwepint(udc, i); + uda_clear_hwepint(udc, i); + udc_disable_hwep(udc, i); + udc_unrealize_hwep(udc, i); + udc->udca_v_base[i] = 0; + + /* Disable and clear all interrupts and DMA */ + udc_ep_dma_disable(udc, i); + writel((1 << i), USBD_EOTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_DMARCLR(udc->udp_baseaddr)); + } + + /* Disable DMA interrupts */ + writel(0, USBD_DMAINTEN(udc->udp_baseaddr)); + + writel(0, USBD_UDCAH(udc->udp_baseaddr)); +} + +static void udc_enable(struct lpc32xx_udc *udc) +{ + u32 i; + struct lpc32xx_ep *ep = &udc->ep[0]; + + /* Start with known state */ + udc_disable(udc); + + /* Enable device */ + udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(DEV_CON)); + + /* EP interrupts on high priority, FRAME interrupt on low priority */ + writel(USBD_EP_FAST, USBD_DEVINTPRI(udc->udp_baseaddr)); + writel(0xFFFF, USBD_EPINTPRI(udc->udp_baseaddr)); + + /* Clear any pending device interrupts */ + writel(0x3FF, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Setup UDCA - not yet used (DMA) */ + writel(udc->udca_p_base, USBD_UDCAH(udc->udp_baseaddr)); + + /* Only enable EP0 in and out for now, EP0 only works in FIFO mode */ + for (i = 0; i <= 1; i++) { + udc_realize_hwep(udc, i, ep->ep.maxpacket); + uda_enable_hwepint(udc, i); + udc_select_hwep(udc, i); + udc_clrstall_hwep(udc, i); + udc_clr_buffer_hwep(udc, i); + } + + /* Device interrupt setup */ + uda_clear_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW | + USBD_EP_FAST)); + uda_enable_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW | + USBD_EP_FAST)); + + /* Set device address to 0 - called twice to force a latch in the USB + engine without the need of a setup packet status closure */ + udc_set_address(udc, 0); + udc_set_address(udc, 0); + + /* Enable master DMA interrupts */ + writel((USBD_SYS_ERR_INT | USBD_EOT_INT), + USBD_DMAINTEN(udc->udp_baseaddr)); + + udc->dev_status = 0; +} + +/* + * + * USB device board specific events handled via callbacks + * + */ +/* Connection change event - notify board function of change */ +static void uda_power_event(struct lpc32xx_udc *udc, u32 conn) +{ + /* Just notify of a connection change event (optional) */ + if (udc->board->conn_chgb != NULL) + udc->board->conn_chgb(conn); +} + +/* Suspend/resume event - notify board function of change */ +static void uda_resm_susp_event(struct lpc32xx_udc *udc, u32 conn) +{ + /* Just notify of a Suspend/resume change event (optional) */ + if (udc->board->susp_chgb != NULL) + udc->board->susp_chgb(conn); + + if (conn) + udc->suspended = 0; + else + udc->suspended = 1; +} + +/* Remote wakeup enable/disable - notify board function of change */ +static void uda_remwkp_cgh(struct lpc32xx_udc *udc) +{ + if (udc->board->rmwk_chgb != NULL) + udc->board->rmwk_chgb(udc->dev_status & + (1 << USB_DEVICE_REMOTE_WAKEUP)); +} + +/* Reads data from FIFO, adjusts for alignment and data size */ +static void udc_pop_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) +{ + int n, i, bl; + u16 *p16; + u32 *p32, tmp, cbytes; + + /* Use optimal data transfer method based on source address and size */ + switch (((u32) data) & 0x3) { + case 0: /* 32-bit aligned */ + p32 = (u32 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) + *p32++ = readl(USBD_RXDATA(udc->udp_baseaddr)); + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + for (n = 0; n < bl; n++) + data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF); + + } + break; + + case 1: /* 8-bit aligned */ + case 3: + /* Each byte has to be handled independently */ + for (n = 0; n < bytes; n += 4) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + + bl = bytes - n; + if (bl > 3) + bl = 3; + + for (i = 0; i < bl; i++) + data[n + i] = (u8) ((tmp >> (n * 8)) & 0xFF); + } + break; + + case 2: /* 16-bit aligned */ + p16 = (u16 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit sized objects first with 16-bit alignment */ + for (n = 0; n < cbytes; n += 4) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + *p16++ = (u16)(tmp & 0xFFFF); + *p16++ = (u16)((tmp >> 16) & 0xFFFF); + } + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + for (n = 0; n < bl; n++) + data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF); + } + break; + } +} + +/* Read data from the FIFO for an endpoint. This function is for endpoints (such + * as EP0) that don't use DMA. This function should only be called if a packet + * is known to be ready to read for the endpoint. Note that the endpoint must + * be selected in the protocol engine prior to this call. */ +static u32 udc_read_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data, + u32 bytes) +{ + u32 tmpv; + int to = 1000; + u32 tmp, hwrep = ((hwep & 0x1E) << 1) | CTRL_RD_EN; + + /* Setup read of endpoint */ + writel(hwrep, USBD_CTRL(udc->udp_baseaddr)); + + /* Wait until packet is ready */ + while ((((tmpv = readl(USBD_RXPLEN(udc->udp_baseaddr))) & + PKT_RDY) == 0) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "No packet ready on FIFO EP read\n"); + + /* Mask out count */ + tmp = tmpv & PKT_LNGTH_MASK; + if (bytes < tmp) + tmp = bytes; + + if ((tmp > 0) && (data != NULL)) + udc_pop_fifo(udc, (u8 *) data, tmp); + + writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr)); + + /* Clear the buffer */ + udc_clr_buffer_hwep(udc, hwep); + + return tmp; +} + +/* Stuffs data into the FIFO, adjusts for alignment and data size */ +static void udc_stuff_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) +{ + int n, i, bl; + u16 *p16; + u32 *p32, tmp, cbytes; + + /* Use optimal data transfer method based on source address and size */ + switch (((u32) data) & 0x3) { + case 0: /* 32-bit aligned */ + p32 = (u32 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) + writel(*p32++, USBD_TXDATA(udc->udp_baseaddr)); + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = 0; + for (n = 0; n < bl; n++) + tmp |= data[cbytes + n] << (n * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + + case 1: /* 8-bit aligned */ + case 3: + /* Each byte has to be handled independently */ + for (n = 0; n < bytes; n += 4) { + bl = bytes - n; + if (bl > 4) + bl = 4; + + tmp = 0; + for (i = 0; i < bl; i++) + tmp |= data[n + i] << (i * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + + case 2: /* 16-bit aligned */ + p16 = (u16 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) { + tmp = *p16++ & 0xFFFF; + tmp |= (*p16++ & 0xFFFF) << 16; + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = 0; + for (n = 0; n < bl; n++) + tmp |= data[cbytes + n] << (n * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + } +} + +/* Write data to the FIFO for an endpoint. This function is for endpoints (such + * as EP0) that don't use DMA. Note that the endpoint must be selected in the + * protocol engine prior to this call. */ +static void udc_write_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data, + u32 bytes) +{ + u32 hwwep = ((hwep & 0x1E) << 1) | CTRL_WR_EN; + + if ((bytes > 0) && (data == NULL)) + return; + + /* Setup write of endpoint */ + writel(hwwep, USBD_CTRL(udc->udp_baseaddr)); + + writel(bytes, USBD_TXPLEN(udc->udp_baseaddr)); + + /* Need at least 1 byte to trigger TX */ + if (bytes == 0) + writel(0, USBD_TXDATA(udc->udp_baseaddr)); + else + udc_stuff_fifo(udc, (u8 *) data, bytes); + + writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr)); + + udc_val_buffer_hwep(udc, hwep); +} + +/* USB device reset - resets USB to a default state with just EP0 + enabled */ +static void uda_usb_reset(struct lpc32xx_udc *udc) +{ + u32 i = 0; + /* Re-init device controller and EP0 */ + udc_enable(udc); + udc->gadget.speed = USB_SPEED_FULL; + + for (i = 1; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + ep->req_pending = 0; + } +} + +/* Send a ZLP on EP0 */ +static void udc_ep0_send_zlp(struct lpc32xx_udc *udc) +{ + udc_write_hwep(udc, EP_IN, NULL, 0); +} + +/* Get current frame number */ +static u16 udc_get_current_frame(struct lpc32xx_udc *udc) +{ + u16 flo, fhi; + + udc_protocol_cmd_w(udc, CMD_RD_FRAME); + flo = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME); + fhi = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME); + + return (fhi << 8) | flo; +} + +/* Set the device as configured - enables all endpoints */ +static inline void udc_set_device_configured(struct lpc32xx_udc *udc) +{ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(CONF_DVICE)); +} + +/* Set the device as unconfigured - disables all endpoints */ +static inline void udc_set_device_unconfigured(struct lpc32xx_udc *udc) +{ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0)); +} + +/* reinit == restore initial software state */ +static void udc_reinit(struct lpc32xx_udc *udc) +{ + u32 i; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&udc->gadget.ep0->ep_list); + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + ep->desc = NULL; + ep->ep.maxpacket = ep->maxpacket; + INIT_LIST_HEAD(&ep->queue); + ep->req_pending = 0; + } + + udc->ep0state = WAIT_FOR_SETUP; +} + +/* Must be called with lock */ +static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status) +{ + struct lpc32xx_udc *udc = ep->udc; + + list_del_init(&req->queue); + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (ep->lep) { + enum dma_data_direction direction; + + if (ep->is_in) + direction = DMA_TO_DEVICE; + else + direction = DMA_FROM_DEVICE; + + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + direction); + req->req.dma = 0; + req->mapped = 0; + } else + dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + direction); + + /* Free DDs */ + udc_dd_free(udc, req->dd_desc_ptr); + } + + if (status && status != -ESHUTDOWN) + ep_dbg(ep, "%s done %p, status %d\n", ep->ep.name, req, status); + + ep->req_pending = 0; + spin_unlock(&udc->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&udc->lock); +} + +/* Must be called with lock */ +static void nuke(struct lpc32xx_ep *ep, int status) +{ + struct lpc32xx_request *req; + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + done(ep, req, status); + } + + if (ep->desc && status == -ESHUTDOWN) { + uda_disable_hwepint(ep->udc, ep->hwep_num); + udc_disable_hwep(ep->udc, ep->hwep_num); + } +} + +/* IN endpoint 0 transfer */ +static int udc_ep0_in_req(struct lpc32xx_udc *udc) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 tsend, ts = 0; + + if (list_empty(&ep0->queue)) + /* Nothing to send */ + return 0; + else + req = list_entry(ep0->queue.next, struct lpc32xx_request, + queue); + + tsend = ts = req->req.length - req->req.actual; + if (ts == 0) { + /* Send a ZLP */ + udc_ep0_send_zlp(udc); + done(ep0, req, 0); + return 1; + } else if (ts > ep0->ep.maxpacket) + ts = ep0->ep.maxpacket; /* Just send what we can */ + + /* Write data to the EP0 FIFO and start transfer */ + udc_write_hwep(udc, EP_IN, (req->req.buf + req->req.actual), ts); + + /* Increment data pointer */ + req->req.actual += ts; + + if (tsend >= ep0->ep.maxpacket) + return 0; /* Stay in data transfer state */ + + /* Transfer request is complete */ + udc->ep0state = WAIT_FOR_SETUP; + done(ep0, req, 0); + return 1; +} + +/* OUT endpoint 0 transfer */ +static int udc_ep0_out_req(struct lpc32xx_udc *udc) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 tr, bufferspace; + + if (list_empty(&ep0->queue)) + return 0; + else + req = list_entry(ep0->queue.next, struct lpc32xx_request, + queue); + + if (req) { + if (req->req.length == 0) { + /* Just dequeue request */ + done(ep0, req, 0); + udc->ep0state = WAIT_FOR_SETUP; + return 1; + } + + /* Get data from FIFO */ + bufferspace = req->req.length - req->req.actual; + if (bufferspace > ep0->ep.maxpacket) + bufferspace = ep0->ep.maxpacket; + + /* Copy data to buffer */ + prefetchw(req->req.buf + req->req.actual); + tr = udc_read_hwep(udc, EP_OUT, req->req.buf + req->req.actual, + bufferspace); + req->req.actual += bufferspace; + + if (tr < ep0->ep.maxpacket) { + /* This is the last packet */ + done(ep0, req, 0); + udc->ep0state = WAIT_FOR_SETUP; + return 1; + } + } + + return 0; +} + +/* Must be called with lock */ +static void stop_activity(struct lpc32xx_udc *udc) +{ + struct usb_gadget_driver *driver = udc->driver; + int i; + + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + nuke(ep, -ESHUTDOWN); + } + if (driver) { + spin_unlock(&udc->lock); + driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + + isp1301_pullup_enable(udc, 0, 0); + udc_disable(udc); + udc_reinit(udc); +} + +/* + * Activate or kill host pullup + * Can be called with or without lock + */ +static void pullup(struct lpc32xx_udc *udc, int is_on) +{ + if (!udc->clocked) + return; + + if (!udc->enabled || !udc->vbus) + is_on = 0; + + if (is_on != udc->pullup) + isp1301_pullup_enable(udc, is_on, 0); +} + +/* Must be called without lock */ +static int lpc32xx_ep_disable(struct usb_ep *_ep) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc = ep->udc; + unsigned long flags; + + if ((ep->hwep_num_base == 0) || (ep->hwep_num == 0)) + return -EINVAL; + spin_lock_irqsave(&udc->lock, flags); + + nuke(ep, -ESHUTDOWN); + + /* restore the endpoint's pristine config */ + ep->desc = NULL; + + /* Clear all DMA statuses for this EP */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr)); + + /* Remove the DD pointer in the UDCA */ + udc->udca_v_base[ep->hwep_num] = 0; + + /* Disable and reset endpoint and interrupt */ + uda_clear_hwepint(udc, ep->hwep_num); + udc_unrealize_hwep(udc, ep->hwep_num); + + ep->hwep_num = 0; + + spin_unlock_irqrestore(&udc->lock, flags); + + atomic_dec(&udc->enabled_ep_cnt); + wake_up(&udc->ep_disable_wait_queue); + + return 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc = ep->udc; + u16 maxpacket; + u32 tmp; + unsigned long flags; + + /* Verify EP data */ + if ((!_ep) || (!ep) || (!desc) || (ep->desc) || + (desc->bDescriptorType != USB_DT_ENDPOINT)) { + dev_dbg(udc->dev, "bad ep or descriptor\n"); + return -EINVAL; + } + maxpacket = usb_endpoint_maxp(desc); + if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) { + dev_dbg(udc->dev, "bad ep descriptor's packet size\n"); + return -EINVAL; + } + + /* Don't touch EP0 */ + if (ep->hwep_num_base == 0) { + dev_dbg(udc->dev, "Can't re-enable EP0!!!\n"); + return -EINVAL; + } + + /* Is driver ready? */ + if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) { + dev_dbg(udc->dev, "bogus device state\n"); + return -ESHUTDOWN; + } + + tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + switch (tmp) { + case USB_ENDPOINT_XFER_CONTROL: + return -EINVAL; + + case USB_ENDPOINT_XFER_INT: + if (maxpacket > ep->maxpacket) { + dev_dbg(udc->dev, + "Bad INT endpoint maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + + case USB_ENDPOINT_XFER_BULK: + switch (maxpacket) { + case 8: + case 16: + case 32: + case 64: + break; + + default: + dev_dbg(udc->dev, + "Bad BULK endpoint maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + + case USB_ENDPOINT_XFER_ISOC: + break; + } + spin_lock_irqsave(&udc->lock, flags); + + /* Initialize endpoint to match the selected descriptor */ + ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0; + ep->desc = desc; + ep->ep.maxpacket = maxpacket; + + /* Map hardware endpoint from base and direction */ + if (ep->is_in) + /* IN endpoints are offset 1 from the OUT endpoint */ + ep->hwep_num = ep->hwep_num_base + EP_IN; + else + ep->hwep_num = ep->hwep_num_base; + + ep_dbg(ep, "EP enabled: %s, HW:%d, MP:%d IN:%d\n", ep->ep.name, + ep->hwep_num, maxpacket, (ep->is_in == 1)); + + /* Realize the endpoint, interrupt is enabled later when + * buffers are queued, IN EPs will NAK until buffers are ready */ + udc_realize_hwep(udc, ep->hwep_num, ep->ep.maxpacket); + udc_clr_buffer_hwep(udc, ep->hwep_num); + uda_disable_hwepint(udc, ep->hwep_num); + udc_clrstall_hwep(udc, ep->hwep_num); + + /* Clear all DMA statuses for this EP */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr)); + + spin_unlock_irqrestore(&udc->lock, flags); + + atomic_inc(&udc->enabled_ep_cnt); + return 0; +} + +/* + * Allocate a USB request list + * Can be called with or without lock + */ +static struct usb_request *lpc32xx_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct lpc32xx_request *req; + + req = kzalloc(sizeof(struct lpc32xx_request), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +/* + * De-allocate a USB request list + * Can be called with or without lock + */ +static void lpc32xx_ep_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct lpc32xx_request *req; + + req = container_of(_req, struct lpc32xx_request, req); + BUG_ON(!list_empty(&req->queue)); + kfree(req); +} + +/* Must be called without lock */ +static int lpc32xx_ep_queue(struct usb_ep *_ep, + struct usb_request *_req, gfp_t gfp_flags) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep; + struct lpc32xx_udc *udc; + unsigned long flags; + int status = 0; + + req = container_of(_req, struct lpc32xx_request, req); + ep = container_of(_ep, struct lpc32xx_ep, ep); + + if (!_req || !_req->complete || !_req->buf || + !list_empty(&req->queue)) + return -EINVAL; + + udc = ep->udc; + + if (!_ep || (!ep->desc && ep->hwep_num_base != 0)) { + dev_dbg(udc->dev, "invalid ep\n"); + return -EINVAL; + } + + + if ((!udc) || (!udc->driver) || + (udc->gadget.speed == USB_SPEED_UNKNOWN)) { + dev_dbg(udc->dev, "invalid device\n"); + return -EINVAL; + } + + if (ep->lep) { + enum dma_data_direction direction; + struct lpc32xx_usbd_dd_gad *dd; + + /* Map DMA pointer */ + if (ep->is_in) + direction = DMA_TO_DEVICE; + else + direction = DMA_FROM_DEVICE; + + if (req->req.dma == 0) { + req->req.dma = dma_map_single( + ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, direction); + req->mapped = 1; + } else { + dma_sync_single_for_device( + ep->udc->gadget.dev.parent, req->req.dma, + req->req.length, direction); + req->mapped = 0; + } + + /* For the request, build a list of DDs */ + dd = udc_dd_alloc(udc); + if (!dd) { + /* Error allocating DD */ + return -ENOMEM; + } + req->dd_desc_ptr = dd; + + /* Setup the DMA descriptor */ + dd->dd_next_phy = dd->dd_next_v = 0; + dd->dd_buffer_addr = req->req.dma; + dd->dd_status = 0; + + /* Special handling for ISO EPs */ + if (ep->eptype == EP_ISO_TYPE) { + dd->dd_setup = DD_SETUP_ISO_EP | + DD_SETUP_PACKETLEN(0) | + DD_SETUP_DMALENBYTES(1); + dd->dd_iso_ps_mem_addr = dd->this_dma + 24; + if (ep->is_in) + dd->iso_status[0] = req->req.length; + else + dd->iso_status[0] = 0; + } else + dd->dd_setup = DD_SETUP_PACKETLEN(ep->ep.maxpacket) | + DD_SETUP_DMALENBYTES(req->req.length); + } + + ep_dbg(ep, "%s queue req %p len %d buf %p (in=%d) z=%d\n", _ep->name, + _req, _req->length, _req->buf, ep->is_in, _req->zero); + + spin_lock_irqsave(&udc->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + req->send_zlp = _req->zero; + + /* Kickstart empty queues */ + if (list_empty(&ep->queue)) { + list_add_tail(&req->queue, &ep->queue); + + if (ep->hwep_num_base == 0) { + /* Handle expected data direction */ + if (ep->is_in) { + /* IN packet to host */ + udc->ep0state = DATA_IN; + status = udc_ep0_in_req(udc); + } else { + /* OUT packet from host */ + udc->ep0state = DATA_OUT; + status = udc_ep0_out_req(udc); + } + } else if (ep->is_in) { + /* IN packet to host and kick off transfer */ + if (!ep->req_pending) + udc_ep_in_req_dma(udc, ep); + } else + /* OUT packet from host and kick off list */ + if (!ep->req_pending) + udc_ep_out_req_dma(udc, ep); + } else + list_add_tail(&req->queue, &ep->queue); + + spin_unlock_irqrestore(&udc->lock, flags); + + return (status < 0) ? status : 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct lpc32xx_ep *ep; + struct lpc32xx_request *req; + unsigned long flags; + + ep = container_of(_ep, struct lpc32xx_ep, ep); + if (!_ep || ep->hwep_num_base == 0) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore(&ep->udc->lock, flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + + return 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc = ep->udc; + unsigned long flags; + + if ((!ep) || (ep->desc == NULL) || (ep->hwep_num <= 1)) + return -EINVAL; + + /* Don't halt an IN EP */ + if (ep->is_in) + return -EAGAIN; + + spin_lock_irqsave(&udc->lock, flags); + + if (value == 1) { + /* stall */ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num), + DAT_WR_BYTE(EP_STAT_ST)); + } else { + /* End stall */ + ep->wedge = 0; + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num), + DAT_WR_BYTE(0)); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* set the halt feature and ignores clear requests */ +static int lpc32xx_ep_set_wedge(struct usb_ep *_ep) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + + if (!_ep || !ep->udc) + return -EINVAL; + + ep->wedge = 1; + + return usb_ep_set_halt(_ep); +} + +static const struct usb_ep_ops lpc32xx_ep_ops = { + .enable = lpc32xx_ep_enable, + .disable = lpc32xx_ep_disable, + .alloc_request = lpc32xx_ep_alloc_request, + .free_request = lpc32xx_ep_free_request, + .queue = lpc32xx_ep_queue, + .dequeue = lpc32xx_ep_dequeue, + .set_halt = lpc32xx_ep_set_halt, + .set_wedge = lpc32xx_ep_set_wedge, +}; + +/* Send a ZLP on a non-0 IN EP */ +void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + /* Clear EP status */ + udc_clearep_getsts(udc, ep->hwep_num); + + /* Send ZLP via FIFO mechanism */ + udc_write_hwep(udc, ep->hwep_num, NULL, 0); +} + +/* + * Handle EP completion for ZLP + * This function will only be called when a delayed ZLP needs to be sent out + * after a DMA transfer has filled both buffers. + */ +void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + u32 epstatus; + struct lpc32xx_request *req; + + if (ep->hwep_num <= 0) + return; + + uda_clear_hwepint(udc, ep->hwep_num); + + /* If this interrupt isn't enabled, return now */ + if (!(udc->enabled_hwepints & (1 << ep->hwep_num))) + return; + + /* Get endpoint status */ + epstatus = udc_clearep_getsts(udc, ep->hwep_num); + + /* + * This should never happen, but protect against writing to the + * buffer when full. + */ + if (epstatus & EP_SEL_F) + return; + + if (ep->is_in) { + udc_send_in_zlp(udc, ep); + uda_disable_hwepint(udc, ep->hwep_num); + } else + return; + + /* If there isn't a request waiting, something went wrong */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + if (req) { + done(ep, req, 0); + + /* Start another request if ready */ + if (!list_empty(&ep->queue)) { + if (ep->is_in) + udc_ep_in_req_dma(udc, ep); + else + udc_ep_out_req_dma(udc, ep); + } else + ep->req_pending = 0; + } +} + + +/* DMA end of transfer completion */ +static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + u32 status, epstatus; + struct lpc32xx_request *req; + struct lpc32xx_usbd_dd_gad *dd; + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep->totalints++; +#endif + + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + if (!req) { + ep_err(ep, "DMA interrupt on no req!\n"); + return; + } + dd = req->dd_desc_ptr; + + /* DMA descriptor should always be retired for this call */ + if (!(dd->dd_status & DD_STATUS_DD_RETIRED)) + ep_warn(ep, "DMA descriptor did not retire\n"); + + /* Disable DMA */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel((1 << ep->hwep_num), USBD_EOTINTCLR(udc->udp_baseaddr)); + writel((1 << ep->hwep_num), USBD_NDDRTINTCLR(udc->udp_baseaddr)); + + /* System error? */ + if (readl(USBD_SYSERRTINTST(udc->udp_baseaddr)) & + (1 << ep->hwep_num)) { + writel((1 << ep->hwep_num), + USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + ep_err(ep, "AHB critical error!\n"); + ep->req_pending = 0; + + /* The error could have occurred on a packet of a multipacket + * transfer, so recovering the transfer is not possible. Close + * the request with an error */ + done(ep, req, -ECONNABORTED); + return; + } + + /* Handle the current DD's status */ + status = dd->dd_status; + switch (status & DD_STATUS_STS_MASK) { + case DD_STATUS_STS_NS: + /* DD not serviced? This shouldn't happen! */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: DD not serviced (0x%x)!\n", + status); + + done(ep, req, -ECONNABORTED); + return; + + case DD_STATUS_STS_BS: + /* Interrupt only fires on EOT - This shouldn't happen! */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: EOT prior to service completion (0x%x)!\n", + status); + done(ep, req, -ECONNABORTED); + return; + + case DD_STATUS_STS_NC: + case DD_STATUS_STS_DUR: + /* Really just a short packet, not an underrun */ + /* This is a good status and what we expect */ + break; + + default: + /* Data overrun, system error, or unknown */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: System error (0x%x)!\n", + status); + done(ep, req, -ECONNABORTED); + return; + } + + /* ISO endpoints are handled differently */ + if (ep->eptype == EP_ISO_TYPE) { + if (ep->is_in) + req->req.actual = req->req.length; + else + req->req.actual = dd->iso_status[0] & 0xFFFF; + } else + req->req.actual += DD_STATUS_CURDMACNT(status); + + /* Send a ZLP if necessary. This will be done for non-int + * packets which have a size that is a divisor of MAXP */ + if (req->send_zlp) { + /* + * If at least 1 buffer is available, send the ZLP now. + * Otherwise, the ZLP send needs to be deferred until a + * buffer is available. + */ + if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) { + udc_clearep_getsts(udc, ep->hwep_num); + uda_enable_hwepint(udc, ep->hwep_num); + epstatus = udc_clearep_getsts(udc, ep->hwep_num); + + /* Let the EP interrupt handle the ZLP */ + return; + } else + udc_send_in_zlp(udc, ep); + } + + /* Transfer request is complete */ + done(ep, req, 0); + + /* Start another request if ready */ + udc_clearep_getsts(udc, ep->hwep_num); + if (!list_empty((&ep->queue))) { + if (ep->is_in) + udc_ep_in_req_dma(udc, ep); + else + udc_ep_out_req_dma(udc, ep); + } else + ep->req_pending = 0; + +} + +/* + * + * Endpoint 0 functions + * + */ +static void udc_handle_dev(struct lpc32xx_udc *udc) +{ + u32 tmp; + + udc_protocol_cmd_w(udc, CMD_GET_DEV_STAT); + tmp = udc_protocol_cmd_r(udc, DAT_GET_DEV_STAT); + + if (tmp & DEV_RST) + uda_usb_reset(udc); + else if (tmp & DEV_CON_CH) + uda_power_event(udc, (tmp & DEV_CON)); + else if (tmp & DEV_SUS_CH) { + if (tmp & DEV_SUS) { + if (udc->vbus == 0) + stop_activity(udc); + else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) && + udc->driver) { + /* Power down transceiver */ + udc->poweron = 0; + schedule_work(&udc->pullup_job); + uda_resm_susp_event(udc, 1); + } + } else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) && + udc->driver && udc->vbus) { + uda_resm_susp_event(udc, 0); + /* Power up transceiver */ + udc->poweron = 1; + schedule_work(&udc->pullup_job); + } + } +} + +static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex) +{ + struct lpc32xx_ep *ep; + u32 ep0buff = 0, tmp; + + switch (reqtype & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + break; /* Not supported */ + + case USB_RECIP_DEVICE: + ep0buff = (udc->selfpowered << USB_DEVICE_SELF_POWERED); + if (udc->dev_status & (1 << USB_DEVICE_REMOTE_WAKEUP)) + ep0buff |= (1 << USB_DEVICE_REMOTE_WAKEUP); + break; + + case USB_RECIP_ENDPOINT: + tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; + ep = &udc->ep[tmp]; + if ((tmp == 0) || (tmp >= NUM_ENDPOINTS) || (tmp && !ep->desc)) + return -EOPNOTSUPP; + + if (wIndex & USB_DIR_IN) { + if (!ep->is_in) + return -EOPNOTSUPP; /* Something's wrong */ + } else if (ep->is_in) + return -EOPNOTSUPP; /* Not an IN endpoint */ + + /* Get status of the endpoint */ + udc_protocol_cmd_w(udc, CMD_SEL_EP(ep->hwep_num)); + tmp = udc_protocol_cmd_r(udc, DAT_SEL_EP(ep->hwep_num)); + + if (tmp & EP_SEL_ST) + ep0buff = (1 << USB_ENDPOINT_HALT); + else + ep0buff = 0; + break; + + default: + break; + } + + /* Return data */ + udc_write_hwep(udc, EP_IN, &ep0buff, 2); + + return 0; +} + +static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep, *ep0 = &udc->ep[0]; + struct usb_ctrlrequest ctrlpkt; + int i, bytes; + u16 wIndex, wValue, wLength, reqtype, req, tmp; + + /* Nuke previous transfers */ + nuke(ep0, -EPROTO); + + /* Get setup packet */ + bytes = udc_read_hwep(udc, EP_OUT, (u32 *) &ctrlpkt, 8); + if (bytes != 8) { + ep_warn(ep0, "Incorrectly sized setup packet (s/b 8, is %d)!\n", + bytes); + return; + } + + /* Native endianness */ + wIndex = le16_to_cpu(ctrlpkt.wIndex); + wValue = le16_to_cpu(ctrlpkt.wValue); + wLength = le16_to_cpu(ctrlpkt.wLength); + reqtype = le16_to_cpu(ctrlpkt.bRequestType); + + /* Set direction of EP0 */ + if (likely(reqtype & USB_DIR_IN)) + ep0->is_in = 1; + else + ep0->is_in = 0; + + /* Handle SETUP packet */ + req = le16_to_cpu(ctrlpkt.bRequest); + switch (req) { + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + switch (reqtype) { + case (USB_TYPE_STANDARD | USB_RECIP_DEVICE): + if (wValue != USB_DEVICE_REMOTE_WAKEUP) + goto stall; /* Nothing else handled */ + + /* Tell board about event */ + if (req == USB_REQ_CLEAR_FEATURE) + udc->dev_status &= + ~(1 << USB_DEVICE_REMOTE_WAKEUP); + else + udc->dev_status |= + (1 << USB_DEVICE_REMOTE_WAKEUP); + uda_remwkp_cgh(udc); + goto zlp_send; + + case (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; + if ((wValue != USB_ENDPOINT_HALT) || + (tmp >= NUM_ENDPOINTS)) + break; + + /* Find hardware endpoint from logical endpoint */ + ep = &udc->ep[tmp]; + tmp = ep->hwep_num; + if (tmp == 0) + break; + + if (req == USB_REQ_SET_FEATURE) + udc_stall_hwep(udc, tmp); + else if (!ep->wedge) + udc_clrstall_hwep(udc, tmp); + + goto zlp_send; + + default: + break; + } + + + case USB_REQ_SET_ADDRESS: + if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) { + udc_set_address(udc, wValue); + goto zlp_send; + } + break; + + case USB_REQ_GET_STATUS: + udc_get_status(udc, reqtype, wIndex); + return; + + default: + break; /* Let GadgetFS handle the descriptor instead */ + } + + if (likely(udc->driver)) { + /* device-2-host (IN) or no data setup command, process + * immediately */ + spin_unlock(&udc->lock); + i = udc->driver->setup(&udc->gadget, &ctrlpkt); + + spin_lock(&udc->lock); + if (req == USB_REQ_SET_CONFIGURATION) { + /* Configuration is set after endpoints are realized */ + if (wValue) { + /* Set configuration */ + udc_set_device_configured(udc); + + udc_protocol_cmd_data_w(udc, CMD_SET_MODE, + DAT_WR_BYTE(AP_CLK | + INAK_BI | INAK_II)); + } else { + /* Clear configuration */ + udc_set_device_unconfigured(udc); + + /* Disable NAK interrupts */ + udc_protocol_cmd_data_w(udc, CMD_SET_MODE, + DAT_WR_BYTE(AP_CLK)); + } + } + + if (i < 0) { + /* setup processing failed, force stall */ + dev_err(udc->dev, + "req %02x.%02x protocol STALL; stat %d\n", + reqtype, req, i); + udc->ep0state = WAIT_FOR_SETUP; + goto stall; + } + } + + if (!ep0->is_in) + udc_ep0_send_zlp(udc); /* ZLP IN packet on data phase */ + + return; + +stall: + udc_stall_hwep(udc, EP_IN); + return; + +zlp_send: + udc_ep0_send_zlp(udc); + return; +} + +/* IN endpoint 0 transfer */ +static void udc_handle_ep0_in(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 epstatus; + + /* Clear EP interrupt */ + epstatus = udc_clearep_getsts(udc, EP_IN); + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep0->totalints++; +#endif + + /* Stalled? Clear stall and reset buffers */ + if (epstatus & EP_SEL_ST) { + udc_clrstall_hwep(udc, EP_IN); + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + return; + } + + /* Is a buffer available? */ + if (!(epstatus & EP_SEL_F)) { + /* Handle based on current state */ + if (udc->ep0state == DATA_IN) + udc_ep0_in_req(udc); + else { + /* Unknown state for EP0 oe end of DATA IN phase */ + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + } + } +} + +/* OUT endpoint 0 transfer */ +static void udc_handle_ep0_out(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 epstatus; + + /* Clear EP interrupt */ + epstatus = udc_clearep_getsts(udc, EP_OUT); + + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep0->totalints++; +#endif + + /* Stalled? */ + if (epstatus & EP_SEL_ST) { + udc_clrstall_hwep(udc, EP_OUT); + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + return; + } + + /* A NAK may occur if a packet couldn't be received yet */ + if (epstatus & EP_SEL_EPN) + return; + /* Setup packet incoming? */ + if (epstatus & EP_SEL_STP) { + nuke(ep0, 0); + udc->ep0state = WAIT_FOR_SETUP; + } + + /* Data available? */ + if (epstatus & EP_SEL_F) + /* Handle based on current state */ + switch (udc->ep0state) { + case WAIT_FOR_SETUP: + udc_handle_ep0_setup(udc); + break; + + case DATA_OUT: + udc_ep0_out_req(udc); + break; + + default: + /* Unknown state for EP0 */ + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + } +} + +/* Must be called without lock */ +static int lpc32xx_get_frame(struct usb_gadget *gadget) +{ + int frame; + unsigned long flags; + struct lpc32xx_udc *udc = to_udc(gadget); + + if (!udc->clocked) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + + frame = (int) udc_get_current_frame(udc); + + spin_unlock_irqrestore(&udc->lock, flags); + + return frame; +} + +static int lpc32xx_wakeup(struct usb_gadget *gadget) +{ + return -ENOTSUPP; +} + +static int lpc32xx_set_selfpowered(struct usb_gadget *gadget, int is_on) +{ + struct lpc32xx_udc *udc = to_udc(gadget); + + /* Always self-powered */ + udc->selfpowered = (is_on != 0); + + return 0; +} + +/* + * vbus is here! turn everything on that's ready + * Must be called without lock + */ +static int lpc32xx_vbus_session(struct usb_gadget *gadget, int is_active) +{ + unsigned long flags; + struct lpc32xx_udc *udc = to_udc(gadget); + + spin_lock_irqsave(&udc->lock, flags); + + /* Doesn't need lock */ + if (udc->driver) { + udc_clk_set(udc, 1); + udc_enable(udc); + pullup(udc, is_active); + } else { + stop_activity(udc); + pullup(udc, 0); + + spin_unlock_irqrestore(&udc->lock, flags); + /* + * Wait for all the endpoints to disable, + * before disabling clocks. Don't wait if + * endpoints are not enabled. + */ + if (atomic_read(&udc->enabled_ep_cnt)) + wait_event_interruptible(udc->ep_disable_wait_queue, + (atomic_read(&udc->enabled_ep_cnt) == 0)); + + spin_lock_irqsave(&udc->lock, flags); + + udc_clk_set(udc, 0); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* Can be called with or without lock */ +static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on) +{ + struct lpc32xx_udc *udc = to_udc(gadget); + + /* Doesn't need lock */ + pullup(udc, is_on); + + return 0; +} + +static int lpc32xx_start(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)); +static int lpc32xx_stop(struct usb_gadget_driver *driver); + +static const struct usb_gadget_ops lpc32xx_udc_ops = { + .get_frame = lpc32xx_get_frame, + .wakeup = lpc32xx_wakeup, + .set_selfpowered = lpc32xx_set_selfpowered, + .vbus_session = lpc32xx_vbus_session, + .pullup = lpc32xx_pullup, + .start = lpc32xx_start, + .stop = lpc32xx_stop, +}; + +static void nop_release(struct device *dev) +{ + /* nothing to free */ +} + +static struct lpc32xx_udc controller = { + .gadget = { + .ops = &lpc32xx_udc_ops, + .ep0 = &controller.ep[0].ep, + .name = driver_name, + .dev = { + .init_name = "gadget", + .release = nop_release, + } + }, + .ep[0] = { + .ep = { + .name = "ep0", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 0, + .hwep_num = 0, /* Can be 0 or 1, has special handling */ + .lep = 0, + .eptype = EP_CTL_TYPE, + }, + .ep[1] = { + .ep = { + .name = "ep1-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 2, + .hwep_num = 0, /* 2 or 3, will be set later */ + .lep = 1, + .eptype = EP_INT_TYPE, + }, + .ep[2] = { + .ep = { + .name = "ep2-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 4, + .hwep_num = 0, /* 4 or 5, will be set later */ + .lep = 2, + .eptype = EP_BLK_TYPE, + }, + .ep[3] = { + .ep = { + .name = "ep3-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 6, + .hwep_num = 0, /* 6 or 7, will be set later */ + .lep = 3, + .eptype = EP_ISO_TYPE, + }, + .ep[4] = { + .ep = { + .name = "ep4-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 8, + .hwep_num = 0, /* 8 or 9, will be set later */ + .lep = 4, + .eptype = EP_INT_TYPE, + }, + .ep[5] = { + .ep = { + .name = "ep5-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 10, + .hwep_num = 0, /* 10 or 11, will be set later */ + .lep = 5, + .eptype = EP_BLK_TYPE, + }, + .ep[6] = { + .ep = { + .name = "ep6-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 12, + .hwep_num = 0, /* 12 or 13, will be set later */ + .lep = 6, + .eptype = EP_ISO_TYPE, + }, + .ep[7] = { + .ep = { + .name = "ep7-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 14, + .hwep_num = 0, + .lep = 7, + .eptype = EP_INT_TYPE, + }, + .ep[8] = { + .ep = { + .name = "ep8-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 16, + .hwep_num = 0, + .lep = 8, + .eptype = EP_BLK_TYPE, + }, + .ep[9] = { + .ep = { + .name = "ep9-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 18, + .hwep_num = 0, + .lep = 9, + .eptype = EP_ISO_TYPE, + }, + .ep[10] = { + .ep = { + .name = "ep10-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 20, + .hwep_num = 0, + .lep = 10, + .eptype = EP_INT_TYPE, + }, + .ep[11] = { + .ep = { + .name = "ep11-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 22, + .hwep_num = 0, + .lep = 11, + .eptype = EP_BLK_TYPE, + }, + .ep[12] = { + .ep = { + .name = "ep12-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 24, + .hwep_num = 0, + .lep = 12, + .eptype = EP_ISO_TYPE, + }, + .ep[13] = { + .ep = { + .name = "ep13-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 26, + .hwep_num = 0, + .lep = 13, + .eptype = EP_INT_TYPE, + }, + .ep[14] = { + .ep = { + .name = "ep14-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 28, + .hwep_num = 0, + .lep = 14, + .eptype = EP_BLK_TYPE, + }, + .ep[15] = { + .ep = { + .name = "ep15-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 30, + .hwep_num = 0, + .lep = 15, + .eptype = EP_BLK_TYPE, + }, +}; + +/* ISO and status interrupts */ +static irqreturn_t lpc32xx_usb_lp_irq(int irq, void *_udc) +{ + u32 tmp, devstat; + struct lpc32xx_udc *udc = _udc; + + spin_lock(&udc->lock); + + /* Read the device status register */ + devstat = readl(USBD_DEVINTST(udc->udp_baseaddr)); + + devstat &= ~USBD_EP_FAST; + writel(devstat, USBD_DEVINTCLR(udc->udp_baseaddr)); + devstat = devstat & udc->enabled_devints; + + /* Device specific handling needed? */ + if (devstat & USBD_DEV_STAT) + udc_handle_dev(udc); + + /* Start of frame? (devstat & FRAME_INT): + * The frame interrupt isn't really needed for ISO support, + * as the driver will queue the necessary packets */ + + /* Error? */ + if (devstat & ERR_INT) { + /* All types of errors, from cable removal during transfer to + * misc protocol and bit errors. These are mostly for just info, + * as the USB hardware will work around these. If these errors + * happen alot, something is wrong. */ + udc_protocol_cmd_w(udc, CMD_RD_ERR_STAT); + tmp = udc_protocol_cmd_r(udc, DAT_RD_ERR_STAT); + dev_dbg(udc->dev, "Device error (0x%x)!\n", tmp); + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +/* EP interrupts */ +static irqreturn_t lpc32xx_usb_hp_irq(int irq, void *_udc) +{ + u32 tmp; + struct lpc32xx_udc *udc = _udc; + + spin_lock(&udc->lock); + + /* Read the device status register */ + writel(USBD_EP_FAST, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Endpoints */ + tmp = readl(USBD_EPINTST(udc->udp_baseaddr)); + + /* Special handling for EP0 */ + if (tmp & (EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) { + /* Handle EP0 IN */ + if (tmp & (EP_MASK_SEL(0, EP_IN))) + udc_handle_ep0_in(udc); + + /* Handle EP0 OUT */ + if (tmp & (EP_MASK_SEL(0, EP_OUT))) + udc_handle_ep0_out(udc); + } + + /* All other EPs */ + if (tmp & ~(EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) { + int i; + + /* Handle other EP interrupts */ + for (i = 1; i < NUM_ENDPOINTS; i++) { + if (tmp & (1 << udc->ep[i].hwep_num)) + udc_handle_eps(udc, &udc->ep[i]); + } + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t lpc32xx_usb_devdma_irq(int irq, void *_udc) +{ + struct lpc32xx_udc *udc = _udc; + + int i; + u32 tmp; + + spin_lock(&udc->lock); + + /* Handle EP DMA EOT interrupts */ + tmp = readl(USBD_EOTINTST(udc->udp_baseaddr)) | + (readl(USBD_EPDMAST(udc->udp_baseaddr)) & + readl(USBD_NDDRTINTST(udc->udp_baseaddr))) | + readl(USBD_SYSERRTINTST(udc->udp_baseaddr)); + for (i = 1; i < NUM_ENDPOINTS; i++) { + if (tmp & (1 << udc->ep[i].hwep_num)) + udc_handle_dma_ep(udc, &udc->ep[i]); + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +/* + * + * VBUS detection, pullup handler, and Gadget cable state notification + * + */ +static void vbus_work(struct work_struct *work) +{ + u8 value; + struct lpc32xx_udc *udc = container_of(work, struct lpc32xx_udc, + vbus_job); + + if (udc->enabled != 0) { + /* Discharge VBUS real quick */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG); + + /* Give VBUS some time (100mS) to discharge */ + msleep(100); + + /* Disable VBUS discharge resistor */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DISCHRG); + + /* Clear interrupt */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | + ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + /* Get the VBUS status from the transceiver */ + value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_2); + + /* VBUS on or off? */ + if (value & OTG_B_SESS_VLD) + udc->vbus = 1; + else + udc->vbus = 0; + + /* VBUS changed? */ + if (udc->last_vbus != udc->vbus) { + udc->last_vbus = udc->vbus; + lpc32xx_vbus_session(&udc->gadget, udc->vbus); + } + } + + /* Re-enable after completion */ + enable_irq(udc->udp_irq[IRQ_USB_ATX]); +} + +static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc) +{ + struct lpc32xx_udc *udc = _udc; + + /* Defer handling of VBUS IRQ to work queue */ + disable_irq_nosync(udc->udp_irq[IRQ_USB_ATX]); + schedule_work(&udc->vbus_job); + + return IRQ_HANDLED; +} + +static int lpc32xx_start(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)) +{ + struct lpc32xx_udc *udc = &controller; + int retval, i; + + if (!driver || driver->max_speed < USB_SPEED_FULL || + !bind || !driver->setup) { + dev_err(udc->dev, "bad parameter.\n"); + return -EINVAL; + } + + if (udc->driver) { + dev_err(udc->dev, "UDC already has a gadget driver\n"); + return -EBUSY; + } + + udc->driver = driver; + udc->gadget.dev.driver = &driver->driver; + udc->enabled = 1; + udc->selfpowered = 1; + udc->vbus = 0; + + retval = bind(&udc->gadget); + if (retval) { + dev_err(udc->dev, "bind() returned %d\n", retval); + udc->enabled = 0; + udc->selfpowered = 0; + udc->driver = NULL; + udc->gadget.dev.driver = NULL; + return retval; + } + + dev_dbg(udc->dev, "bound to %s\n", driver->driver.name); + + /* Force VBUS process once to check for cable insertion */ + udc->last_vbus = udc->vbus = 0; + schedule_work(&udc->vbus_job); + + /* Do not re-enable ATX IRQ (3) */ + for (i = IRQ_USB_LP; i < IRQ_USB_ATX; i++) + enable_irq(udc->udp_irq[i]); + + return 0; +} + +static int lpc32xx_stop(struct usb_gadget_driver *driver) +{ + int i; + struct lpc32xx_udc *udc = &controller; + + if (!driver || driver != udc->driver || !driver->unbind) + return -EINVAL; + + /* Disable USB pullup */ + isp1301_pullup_enable(udc, 0, 1); + + for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++) + disable_irq(udc->udp_irq[i]); + + if (udc->clocked) { + + spin_lock(&udc->lock); + stop_activity(udc); + spin_unlock(&udc->lock); + + /* + * Wait for all the endpoints to disable, + * before disabling clocks. Don't wait if + * endpoints are not enabled. + */ + if (atomic_read(&udc->enabled_ep_cnt)) + wait_event_interruptible(udc->ep_disable_wait_queue, + (atomic_read(&udc->enabled_ep_cnt) == 0)); + + spin_lock(&udc->lock); + udc_clk_set(udc, 0); + spin_unlock(&udc->lock); + } + + udc->enabled = 0; + pullup(udc, 0); + + driver->unbind(&udc->gadget); + udc->gadget.dev.driver = NULL; + udc->driver = NULL; + + dev_dbg(udc->dev, "unbound from %s\n", driver->driver.name); + return 0; +} + +static void lpc32xx_udc_shutdown(struct platform_device *dev) +{ + /* Force disconnect on reboot */ + struct lpc32xx_udc *udc = &controller; + + pullup(udc, 0); +} + +/* + * Callbacks to be overridden by options passed via OF (TODO) + */ + +static void lpc32xx_usbd_conn_chg(int conn) +{ + /* Do nothing, it might be nice to enable an LED + * based on conn state being !0 */ +} + +static void lpc32xx_usbd_susp_chg(int susp) +{ + /* Device suspend if susp != 0 */ +} + +static void lpc32xx_rmwkup_chg(int remote_wakup_enable) +{ + /* Enable or disable USB remote wakeup */ +} + +struct lpc32xx_usbd_cfg lpc32xx_usbddata = { + .vbus_drv_pol = 0, + .conn_chgb = &lpc32xx_usbd_conn_chg, + .susp_chgb = &lpc32xx_usbd_susp_chg, + .rmwk_chgb = &lpc32xx_rmwkup_chg, +}; + + +static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F; + +static int __init lpc32xx_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct lpc32xx_udc *udc = &controller; + int retval, i; + struct resource *res; + dma_addr_t dma_handle; + struct device_node *isp1301_node; + + /* init software state */ + udc->gadget.dev.parent = dev; + udc->pdev = pdev; + udc->dev = &pdev->dev; + udc->enabled = 0; + + if (pdev->dev.of_node) { + isp1301_node = of_parse_phandle(pdev->dev.of_node, + "transceiver", 0); + } else { + isp1301_node = NULL; + } + + udc->isp1301_i2c_client = isp1301_get_client(isp1301_node); + if (!udc->isp1301_i2c_client) + return -EPROBE_DEFER; + + dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n", + udc->isp1301_i2c_client->addr); + + pdev->dev.dma_mask = &lpc32xx_usbd_dmamask; + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + udc->board = &lpc32xx_usbddata; + + /* + * Resources are mapped as follows: + * IORESOURCE_MEM, base address and size of USB space + * IORESOURCE_IRQ, USB device low priority interrupt number + * IORESOURCE_IRQ, USB device high priority interrupt number + * IORESOURCE_IRQ, USB device interrupt number + * IORESOURCE_IRQ, USB transceiver interrupt number + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + spin_lock_init(&udc->lock); + + /* Get IRQs */ + for (i = 0; i < 4; i++) { + udc->udp_irq[i] = platform_get_irq(pdev, i); + if (udc->udp_irq[i] < 0) { + dev_err(udc->dev, + "irq resource %d not available!\n", i); + return udc->udp_irq[i]; + } + } + + udc->io_p_start = res->start; + udc->io_p_size = resource_size(res); + if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) { + dev_err(udc->dev, "someone's using UDC memory\n"); + return -EBUSY; + } + + udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size); + if (!udc->udp_baseaddr) { + retval = -ENOMEM; + dev_err(udc->dev, "IO map failure\n"); + goto io_map_fail; + } + + /* Enable AHB slave USB clock, needed for further USB clock control */ + writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL); + + /* Get required clocks */ + udc->usb_pll_clk = clk_get(&pdev->dev, "ck_pll5"); + if (IS_ERR(udc->usb_pll_clk)) { + dev_err(udc->dev, "failed to acquire USB PLL\n"); + retval = PTR_ERR(udc->usb_pll_clk); + goto pll_get_fail; + } + udc->usb_slv_clk = clk_get(&pdev->dev, "ck_usbd"); + if (IS_ERR(udc->usb_slv_clk)) { + dev_err(udc->dev, "failed to acquire USB device clock\n"); + retval = PTR_ERR(udc->usb_slv_clk); + goto usb_clk_get_fail; + } + + /* Setup PLL clock to 48MHz */ + retval = clk_enable(udc->usb_pll_clk); + if (retval < 0) { + dev_err(udc->dev, "failed to start USB PLL\n"); + goto pll_enable_fail; + } + + retval = clk_set_rate(udc->usb_pll_clk, 48000); + if (retval < 0) { + dev_err(udc->dev, "failed to set USB clock rate\n"); + goto pll_set_fail; + } + + writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, USB_CTRL); + + /* Enable USB device clock */ + retval = clk_enable(udc->usb_slv_clk); + if (retval < 0) { + dev_err(udc->dev, "failed to start USB device clock\n"); + goto usb_clk_enable_fail; + } + + /* Set to enable all needed USB OTG clocks */ + writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); + + i = 1000; + while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != + USB_CLOCK_MASK) && (i > 0)) + i--; + if (!i) + dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n"); + + /* Setup deferred workqueue data */ + udc->poweron = udc->pullup = 0; + INIT_WORK(&udc->pullup_job, pullup_work); + INIT_WORK(&udc->vbus_job, vbus_work); +#ifdef CONFIG_PM + INIT_WORK(&udc->power_job, power_work); +#endif + + /* All clocks are now on */ + udc->clocked = 1; + + isp1301_udc_configure(udc); + /* Allocate memory for the UDCA */ + udc->udca_v_base = dma_alloc_coherent(&pdev->dev, UDCA_BUFF_SIZE, + &dma_handle, + (GFP_KERNEL | GFP_DMA)); + if (!udc->udca_v_base) { + dev_err(udc->dev, "error getting UDCA region\n"); + retval = -ENOMEM; + goto i2c_fail; + } + udc->udca_p_base = dma_handle; + dev_dbg(udc->dev, "DMA buffer(0x%x bytes), P:0x%08x, V:0x%p\n", + UDCA_BUFF_SIZE, udc->udca_p_base, udc->udca_v_base); + + /* Setup the DD DMA memory pool */ + udc->dd_cache = dma_pool_create("udc_dd", udc->dev, + sizeof(struct lpc32xx_usbd_dd_gad), + sizeof(u32), 0); + if (!udc->dd_cache) { + dev_err(udc->dev, "error getting DD DMA region\n"); + retval = -ENOMEM; + goto dma_alloc_fail; + } + + /* Clear USB peripheral and initialize gadget endpoints */ + udc_disable(udc); + udc_reinit(udc); + + retval = device_register(&udc->gadget.dev); + if (retval < 0) { + dev_err(udc->dev, "Device registration failure\n"); + goto dev_register_fail; + } + + /* Request IRQs - low and high priority USB device IRQs are routed to + * the same handler, while the DMA interrupt is routed elsewhere */ + retval = request_irq(udc->udp_irq[IRQ_USB_LP], lpc32xx_usb_lp_irq, + 0, "udc_lp", udc); + if (retval < 0) { + dev_err(udc->dev, "LP request irq %d failed\n", + udc->udp_irq[IRQ_USB_LP]); + goto irq_lp_fail; + } + retval = request_irq(udc->udp_irq[IRQ_USB_HP], lpc32xx_usb_hp_irq, + 0, "udc_hp", udc); + if (retval < 0) { + dev_err(udc->dev, "HP request irq %d failed\n", + udc->udp_irq[IRQ_USB_HP]); + goto irq_hp_fail; + } + + retval = request_irq(udc->udp_irq[IRQ_USB_DEVDMA], + lpc32xx_usb_devdma_irq, 0, "udc_dma", udc); + if (retval < 0) { + dev_err(udc->dev, "DEV request irq %d failed\n", + udc->udp_irq[IRQ_USB_DEVDMA]); + goto irq_dev_fail; + } + + /* The transceiver interrupt is used for VBUS detection and will + kick off the VBUS handler function */ + retval = request_irq(udc->udp_irq[IRQ_USB_ATX], lpc32xx_usb_vbus_irq, + 0, "udc_otg", udc); + if (retval < 0) { + dev_err(udc->dev, "VBUS request irq %d failed\n", + udc->udp_irq[IRQ_USB_ATX]); + goto irq_xcvr_fail; + } + + /* Initialize wait queue */ + init_waitqueue_head(&udc->ep_disable_wait_queue); + atomic_set(&udc->enabled_ep_cnt, 0); + + /* Keep all IRQs disabled until GadgetFS starts up */ + for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++) + disable_irq(udc->udp_irq[i]); + + retval = usb_add_gadget_udc(dev, &udc->gadget); + if (retval < 0) + goto add_gadget_fail; + + dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); + create_debug_file(udc); + + /* Disable clocks for now */ + udc_clk_set(udc, 0); + + dev_info(udc->dev, "%s version %s\n", driver_name, DRIVER_VERSION); + return 0; + +add_gadget_fail: + free_irq(udc->udp_irq[IRQ_USB_ATX], udc); +irq_xcvr_fail: + free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc); +irq_dev_fail: + free_irq(udc->udp_irq[IRQ_USB_HP], udc); +irq_hp_fail: + free_irq(udc->udp_irq[IRQ_USB_LP], udc); +irq_lp_fail: + device_unregister(&udc->gadget.dev); +dev_register_fail: + dma_pool_destroy(udc->dd_cache); +dma_alloc_fail: + dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, + udc->udca_v_base, udc->udca_p_base); +i2c_fail: + clk_disable(udc->usb_slv_clk); +usb_clk_enable_fail: +pll_set_fail: + clk_disable(udc->usb_pll_clk); +pll_enable_fail: + clk_put(udc->usb_slv_clk); +usb_clk_get_fail: + clk_put(udc->usb_pll_clk); +pll_get_fail: + iounmap(udc->udp_baseaddr); +io_map_fail: + release_mem_region(udc->io_p_start, udc->io_p_size); + dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval); + + return retval; +} + +static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) +{ + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + if (udc->driver) + return -EBUSY; + + udc_clk_set(udc, 1); + udc_disable(udc); + pullup(udc, 0); + + free_irq(udc->udp_irq[IRQ_USB_ATX], udc); + + device_init_wakeup(&pdev->dev, 0); + remove_debug_file(udc); + + dma_pool_destroy(udc->dd_cache); + dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, + udc->udca_v_base, udc->udca_p_base); + free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc); + free_irq(udc->udp_irq[IRQ_USB_HP], udc); + free_irq(udc->udp_irq[IRQ_USB_LP], udc); + + device_unregister(&udc->gadget.dev); + + clk_disable(udc->usb_slv_clk); + clk_put(udc->usb_slv_clk); + clk_disable(udc->usb_pll_clk); + clk_put(udc->usb_pll_clk); + iounmap(udc->udp_baseaddr); + release_mem_region(udc->io_p_start, udc->io_p_size); + + return 0; +} + +#ifdef CONFIG_PM +static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + int to = 1000; + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + if (udc->clocked) { + /* Power down ISP */ + udc->poweron = 0; + isp1301_set_powerstate(udc, 0); + + /* Disable clocking */ + udc_clk_set(udc, 0); + + /* Keep clock flag on, so we know to re-enable clocks + on resume */ + udc->clocked = 1; + + /* Kill OTG and I2C clocks */ + writel(0, USB_OTG_CLK_CTRL(udc)); + while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) != + OTGOFF_CLK_MASK) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, + "USB OTG clocks not correctly enabled\n"); + + /* Kill global USB clock */ + clk_disable(udc->usb_slv_clk); + } + + return 0; +} + +static int lpc32xx_udc_resume(struct platform_device *pdev) +{ + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + if (udc->clocked) { + /* Enable global USB clock */ + clk_enable(udc->usb_slv_clk); + + /* Enable clocking */ + udc_clk_set(udc, 1); + + /* ISP back to normal power mode */ + udc->poweron = 1; + isp1301_set_powerstate(udc, 1); + } + + return 0; +} +#else +#define lpc32xx_udc_suspend NULL +#define lpc32xx_udc_resume NULL +#endif + +#ifdef CONFIG_OF +static struct of_device_id lpc32xx_udc_of_match[] = { + { .compatible = "nxp,lpc3220-udc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match); +#endif + +static struct platform_driver lpc32xx_udc_driver = { + .remove = __devexit_p(lpc32xx_udc_remove), + .shutdown = lpc32xx_udc_shutdown, + .suspend = lpc32xx_udc_suspend, + .resume = lpc32xx_udc_resume, + .driver = { + .name = (char *) driver_name, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lpc32xx_udc_of_match), + }, +}; + +static int __init udc_init_module(void) +{ + return platform_driver_probe(&lpc32xx_udc_driver, lpc32xx_udc_probe); +} +module_init(udc_init_module); + +static void __exit udc_exit_module(void) +{ + platform_driver_unregister(&lpc32xx_udc_driver); +} +module_exit(udc_exit_module); + +MODULE_DESCRIPTION("LPC32XX udc driver"); +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); +MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lpc32xx_udc"); diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 3608b3bd5732..8981fbb5748c 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -390,7 +390,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, int *counter; int ret; - ep->desc = desc; + ep->ep.desc = desc; BUG_ON(ep->pipenum); @@ -558,7 +558,7 @@ static void start_packet_read(struct m66592_ep *ep, struct m66592_request *req) static void start_packet(struct m66592_ep *ep, struct m66592_request *req) { - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) start_packet_write(ep, req); else start_packet_read(ep, req); @@ -734,7 +734,7 @@ __acquires(m66592->lock) if (restart) { req = list_entry(ep->queue.next, struct m66592_request, queue); - if (ep->desc) + if (ep->ep.desc) start_packet(ep, req); } } @@ -917,7 +917,7 @@ static void irq_pipe_ready(struct m66592 *m66592, u16 status, u16 enb) ep = m66592->pipenum2ep[pipenum]; req = list_entry(ep->queue.next, struct m66592_request, queue); - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) irq_packet_write(ep, req); else irq_packet_read(ep, req); @@ -1377,7 +1377,7 @@ static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == NULL) /* control */ + if (ep->ep.desc == NULL) /* control */ start_ep0(ep, req); else { if (request && !ep->busy) diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index 9d9f7e39f037..88c85b4116a2 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -456,7 +456,7 @@ struct m66592_ep { unsigned use_dma:1; u16 pipenum; u16 type; - const struct usb_endpoint_descriptor *desc; + /* register address */ unsigned long fifoaddr; unsigned long fifosel; diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h index e2be9519abbe..9073436d8b24 100644 --- a/drivers/usb/gadget/mv_udc.h +++ b/drivers/usb/gadget/mv_udc.h @@ -232,7 +232,6 @@ struct mv_ep { struct mv_udc *udc; struct list_head queue; struct mv_dqh *dqh; - const struct usb_endpoint_descriptor *desc; u32 direction; char name[14]; unsigned stopped:1, diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index a73cf406e2a4..117a4bba1b8c 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -464,7 +464,7 @@ static int mv_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; - if (!_ep || !desc || ep->desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; @@ -528,7 +528,7 @@ static int mv_ep_enable(struct usb_ep *_ep, dqh->size_ioc_int_sts = 0; ep->ep.maxpacket = max; - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; /* Enable the endpoint for Rx or Tx and set the endpoint type */ @@ -580,7 +580,7 @@ static int mv_ep_disable(struct usb_ep *_ep) unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); - if ((_ep == NULL) || !ep->desc) + if ((_ep == NULL) || !ep->ep.desc) return -EINVAL; udc = ep->udc; @@ -606,7 +606,6 @@ static int mv_ep_disable(struct usb_ep *_ep) /* nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; @@ -651,7 +650,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) return; ep = container_of(_ep, struct mv_ep, ep); - if (!ep->desc) + if (!ep->ep.desc) return; udc = ep->udc; @@ -715,11 +714,11 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) dev_err(&udc->dev->dev, "%s, bad params", __func__); return -EINVAL; } - if (unlikely(!_ep || !ep->desc)) { + if (unlikely(!_ep || !ep->ep.desc)) { dev_err(&udc->dev->dev, "%s, bad ep", __func__); return -EINVAL; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; } @@ -925,12 +924,12 @@ static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge) ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { status = -EINVAL; goto out; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { status = -EOPNOTSUPP; goto out; } @@ -1279,7 +1278,7 @@ static int eps_init(struct mv_udc *udc) ep->stopped = 0; ep->ep.maxpacket = EP0_MAX_PKT_SIZE; ep->ep_num = 0; - ep->desc = &mv_ep0_desc; + ep->ep.desc = &mv_ep0_desc; INIT_LIST_HEAD(&ep->queue); ep->ep_type = USB_ENDPOINT_XFER_CONTROL; diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h index b0e52fc277b4..a19f72dec0cd 100644 --- a/drivers/usb/gadget/ndis.h +++ b/drivers/usb/gadget/ndis.h @@ -15,11 +15,6 @@ #ifndef _LINUX_NDIS_H #define _LINUX_NDIS_H - -#define NDIS_STATUS_MULTICAST_FULL 0xC0010009 -#define NDIS_STATUS_MULTICAST_EXISTS 0xC001000A -#define NDIS_STATUS_MULTICAST_NOT_FOUND 0xC001000B - enum NDIS_DEVICE_POWER_STATE { NdisDeviceStateUnspecified = 0, NdisDeviceStateD0, @@ -35,11 +30,6 @@ struct NDIS_PM_WAKE_UP_CAPABILITIES { enum NDIS_DEVICE_POWER_STATE MinLinkChangeWakeUp; }; -/* NDIS_PNP_CAPABILITIES.Flags constants */ -#define NDIS_DEVICE_WAKE_UP_ENABLE 0x00000001 -#define NDIS_DEVICE_WAKE_ON_PATTERN_MATCH_ENABLE 0x00000002 -#define NDIS_DEVICE_WAKE_ON_MAGIC_PACKET_ENABLE 0x00000004 - struct NDIS_PNP_CAPABILITIES { __le32 Flags; struct NDIS_PM_WAKE_UP_CAPABILITIES WakeUpCapabilities; @@ -54,158 +44,4 @@ struct NDIS_PM_PACKET_PATTERN { __le32 PatternFlags; }; - -/* Required Object IDs (OIDs) */ -#define OID_GEN_SUPPORTED_LIST 0x00010101 -#define OID_GEN_HARDWARE_STATUS 0x00010102 -#define OID_GEN_MEDIA_SUPPORTED 0x00010103 -#define OID_GEN_MEDIA_IN_USE 0x00010104 -#define OID_GEN_MAXIMUM_LOOKAHEAD 0x00010105 -#define OID_GEN_MAXIMUM_FRAME_SIZE 0x00010106 -#define OID_GEN_LINK_SPEED 0x00010107 -#define OID_GEN_TRANSMIT_BUFFER_SPACE 0x00010108 -#define OID_GEN_RECEIVE_BUFFER_SPACE 0x00010109 -#define OID_GEN_TRANSMIT_BLOCK_SIZE 0x0001010A -#define OID_GEN_RECEIVE_BLOCK_SIZE 0x0001010B -#define OID_GEN_VENDOR_ID 0x0001010C -#define OID_GEN_VENDOR_DESCRIPTION 0x0001010D -#define OID_GEN_CURRENT_PACKET_FILTER 0x0001010E -#define OID_GEN_CURRENT_LOOKAHEAD 0x0001010F -#define OID_GEN_DRIVER_VERSION 0x00010110 -#define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111 -#define OID_GEN_PROTOCOL_OPTIONS 0x00010112 -#define OID_GEN_MAC_OPTIONS 0x00010113 -#define OID_GEN_MEDIA_CONNECT_STATUS 0x00010114 -#define OID_GEN_MAXIMUM_SEND_PACKETS 0x00010115 -#define OID_GEN_VENDOR_DRIVER_VERSION 0x00010116 -#define OID_GEN_SUPPORTED_GUIDS 0x00010117 -#define OID_GEN_NETWORK_LAYER_ADDRESSES 0x00010118 -#define OID_GEN_TRANSPORT_HEADER_OFFSET 0x00010119 -#define OID_GEN_MACHINE_NAME 0x0001021A -#define OID_GEN_RNDIS_CONFIG_PARAMETER 0x0001021B -#define OID_GEN_VLAN_ID 0x0001021C - -/* Optional OIDs */ -#define OID_GEN_MEDIA_CAPABILITIES 0x00010201 -#define OID_GEN_PHYSICAL_MEDIUM 0x00010202 - -/* Required statistics OIDs */ -#define OID_GEN_XMIT_OK 0x00020101 -#define OID_GEN_RCV_OK 0x00020102 -#define OID_GEN_XMIT_ERROR 0x00020103 -#define OID_GEN_RCV_ERROR 0x00020104 -#define OID_GEN_RCV_NO_BUFFER 0x00020105 - -/* Optional statistics OIDs */ -#define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 -#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202 -#define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 -#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204 -#define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 -#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206 -#define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 -#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 -#define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 -#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A -#define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B -#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C -#define OID_GEN_RCV_CRC_ERROR 0x0002020D -#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E -#define OID_GEN_GET_TIME_CAPS 0x0002020F -#define OID_GEN_GET_NETCARD_TIME 0x00020210 -#define OID_GEN_NETCARD_LOAD 0x00020211 -#define OID_GEN_DEVICE_PROFILE 0x00020212 -#define OID_GEN_INIT_TIME_MS 0x00020213 -#define OID_GEN_RESET_COUNTS 0x00020214 -#define OID_GEN_MEDIA_SENSE_COUNTS 0x00020215 -#define OID_GEN_FRIENDLY_NAME 0x00020216 -#define OID_GEN_MINIPORT_INFO 0x00020217 -#define OID_GEN_RESET_VERIFY_PARAMETERS 0x00020218 - -/* IEEE 802.3 (Ethernet) OIDs */ -#define NDIS_802_3_MAC_OPTION_PRIORITY 0x00000001 - -#define OID_802_3_PERMANENT_ADDRESS 0x01010101 -#define OID_802_3_CURRENT_ADDRESS 0x01010102 -#define OID_802_3_MULTICAST_LIST 0x01010103 -#define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 -#define OID_802_3_MAC_OPTIONS 0x01010105 -#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 -#define OID_802_3_XMIT_ONE_COLLISION 0x01020102 -#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 -#define OID_802_3_XMIT_DEFERRED 0x01020201 -#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202 -#define OID_802_3_RCV_OVERRUN 0x01020203 -#define OID_802_3_XMIT_UNDERRUN 0x01020204 -#define OID_802_3_XMIT_HEARTBEAT_FAILURE 0x01020205 -#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206 -#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207 - -/* OID_GEN_MINIPORT_INFO constants */ -#define NDIS_MINIPORT_BUS_MASTER 0x00000001 -#define NDIS_MINIPORT_WDM_DRIVER 0x00000002 -#define NDIS_MINIPORT_SG_LIST 0x00000004 -#define NDIS_MINIPORT_SUPPORTS_MEDIA_QUERY 0x00000008 -#define NDIS_MINIPORT_INDICATES_PACKETS 0x00000010 -#define NDIS_MINIPORT_IGNORE_PACKET_QUEUE 0x00000020 -#define NDIS_MINIPORT_IGNORE_REQUEST_QUEUE 0x00000040 -#define NDIS_MINIPORT_IGNORE_TOKEN_RING_ERRORS 0x00000080 -#define NDIS_MINIPORT_INTERMEDIATE_DRIVER 0x00000100 -#define NDIS_MINIPORT_IS_NDIS_5 0x00000200 -#define NDIS_MINIPORT_IS_CO 0x00000400 -#define NDIS_MINIPORT_DESERIALIZE 0x00000800 -#define NDIS_MINIPORT_REQUIRES_MEDIA_POLLING 0x00001000 -#define NDIS_MINIPORT_SUPPORTS_MEDIA_SENSE 0x00002000 -#define NDIS_MINIPORT_NETBOOT_CARD 0x00004000 -#define NDIS_MINIPORT_PM_SUPPORTED 0x00008000 -#define NDIS_MINIPORT_SUPPORTS_MAC_ADDRESS_OVERWRITE 0x00010000 -#define NDIS_MINIPORT_USES_SAFE_BUFFER_APIS 0x00020000 -#define NDIS_MINIPORT_HIDDEN 0x00040000 -#define NDIS_MINIPORT_SWENUM 0x00080000 -#define NDIS_MINIPORT_SURPRISE_REMOVE_OK 0x00100000 -#define NDIS_MINIPORT_NO_HALT_ON_SUSPEND 0x00200000 -#define NDIS_MINIPORT_HARDWARE_DEVICE 0x00400000 -#define NDIS_MINIPORT_SUPPORTS_CANCEL_SEND_PACKETS 0x00800000 -#define NDIS_MINIPORT_64BITS_DMA 0x01000000 - -#define NDIS_MEDIUM_802_3 0x00000000 -#define NDIS_MEDIUM_802_5 0x00000001 -#define NDIS_MEDIUM_FDDI 0x00000002 -#define NDIS_MEDIUM_WAN 0x00000003 -#define NDIS_MEDIUM_LOCAL_TALK 0x00000004 -#define NDIS_MEDIUM_DIX 0x00000005 -#define NDIS_MEDIUM_ARCENT_RAW 0x00000006 -#define NDIS_MEDIUM_ARCENT_878_2 0x00000007 -#define NDIS_MEDIUM_ATM 0x00000008 -#define NDIS_MEDIUM_WIRELESS_LAN 0x00000009 -#define NDIS_MEDIUM_IRDA 0x0000000A -#define NDIS_MEDIUM_BPC 0x0000000B -#define NDIS_MEDIUM_CO_WAN 0x0000000C -#define NDIS_MEDIUM_1394 0x0000000D - -#define NDIS_PACKET_TYPE_DIRECTED 0x00000001 -#define NDIS_PACKET_TYPE_MULTICAST 0x00000002 -#define NDIS_PACKET_TYPE_ALL_MULTICAST 0x00000004 -#define NDIS_PACKET_TYPE_BROADCAST 0x00000008 -#define NDIS_PACKET_TYPE_SOURCE_ROUTING 0x00000010 -#define NDIS_PACKET_TYPE_PROMISCUOUS 0x00000020 -#define NDIS_PACKET_TYPE_SMT 0x00000040 -#define NDIS_PACKET_TYPE_ALL_LOCAL 0x00000080 -#define NDIS_PACKET_TYPE_GROUP 0x00000100 -#define NDIS_PACKET_TYPE_ALL_FUNCTIONAL 0x00000200 -#define NDIS_PACKET_TYPE_FUNCTIONAL 0x00000400 -#define NDIS_PACKET_TYPE_MAC_FRAME 0x00000800 - -#define NDIS_MEDIA_STATE_CONNECTED 0x00000000 -#define NDIS_MEDIA_STATE_DISCONNECTED 0x00000001 - -#define NDIS_MAC_OPTION_COPY_LOOKAHEAD_DATA 0x00000001 -#define NDIS_MAC_OPTION_RECEIVE_SERIALIZED 0x00000002 -#define NDIS_MAC_OPTION_TRANSFERS_NOT_PEND 0x00000004 -#define NDIS_MAC_OPTION_NO_LOOPBACK 0x00000008 -#define NDIS_MAC_OPTION_FULL_DUPLEX 0x00000010 -#define NDIS_MAC_OPTION_EOTX_INDICATION 0x00000020 -#define NDIS_MAC_OPTION_8021P_PRIORITY 0x00000040 -#define NDIS_MAC_OPTION_RESERVED 0x80000000 - #endif /* _LINUX_NDIS_H */ diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 3b4b6dd0f95a..a460e8c204f4 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -153,7 +153,7 @@ static int omap_ep_enable(struct usb_ep *_ep, u16 maxp; /* catch various bogus parameters */ - if (!_ep || !desc || ep->desc + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->maxpacket < usb_endpoint_maxp(desc)) { @@ -200,7 +200,7 @@ static int omap_ep_enable(struct usb_ep *_ep, spin_lock_irqsave(&udc->lock, flags); - ep->desc = desc; + ep->ep.desc = desc; ep->irqs = 0; ep->stopped = 0; ep->ep.maxpacket = maxp; @@ -242,14 +242,13 @@ static int omap_ep_disable(struct usb_ep *_ep) struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); unsigned long flags; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { DBG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; } spin_lock_irqsave(&ep->udc->lock, flags); - ep->desc = NULL; ep->ep.desc = NULL; nuke (ep, -ESHUTDOWN); ep->ep.maxpacket = ep->maxpacket; @@ -917,7 +916,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) DBG("%s, bad params\n", __func__); return -EINVAL; } - if (!_ep || (!ep->desc && ep->bEndpointAddress)) { + if (!_ep || (!ep->ep.desc && ep->bEndpointAddress)) { DBG("%s, bad ep\n", __func__); return -EINVAL; } @@ -1121,7 +1120,7 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value) status = 0; /* otherwise, all active non-ISO endpoints can halt */ - } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) { + } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->ep.desc) { /* IN endpoints must already be idle */ if ((ep->bEndpointAddress & USB_DIR_IN) @@ -1625,7 +1624,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) if (w_index & USB_DIR_IN) ep += 16; if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - || !ep->desc) + || !ep->ep.desc) goto do_stall; use_ep(ep, 0); omap_writew(udc->clr_halt, UDC_CTRL); @@ -1653,7 +1652,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) if (w_index & USB_DIR_IN) ep += 16; if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - || ep == ep0 || !ep->desc) + || ep == ep0 || !ep->ep.desc) goto do_stall; if (use_dma && ep->has_dma) { /* this has rude side-effects (aborts) and @@ -1688,7 +1687,7 @@ ep0out_status_stage: ep = &udc->ep[w_index & 0xf]; if (w_index & USB_DIR_IN) ep += 16; - if (!ep->desc) + if (!ep->ep.desc) goto do_stall; /* iso never stalls */ @@ -2509,7 +2508,7 @@ static int proc_udc_show(struct seq_file *s, void *_) if (tmp & UDC_ADD) { list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) + if (ep->ep.desc) proc_ep_show(s, ep); } } diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h index 59d3b2213cb1..cfadeb5fc5de 100644 --- a/drivers/usb/gadget/omap_udc.h +++ b/drivers/usb/gadget/omap_udc.h @@ -140,7 +140,6 @@ struct omap_ep { struct list_head queue; unsigned long irqs; struct list_head iso; - const struct usb_endpoint_descriptor *desc; char name[14]; u16 maxpacket; u8 bEndpointAddress; diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 65307064a6fd..1cfcc9ecbfbc 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -295,7 +295,6 @@ struct pch_udc_ep { struct pch_udc_data_dma_desc *td_data; struct pch_udc_dev *dev; unsigned long offset_addr; - const struct usb_endpoint_descriptor *desc; struct list_head queue; unsigned num:5, in:1, @@ -1705,7 +1704,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep, if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; spin_lock_irqsave(&dev->lock, iflags); - ep->desc = desc; + ep->ep.desc = desc; ep->halted = 0; pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc); ep->ep.maxpacket = usb_endpoint_maxp(desc); @@ -1734,7 +1733,7 @@ static int pch_udc_pcd_ep_disable(struct usb_ep *usbep) ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if ((usbep->name == ep0_string) || !ep->desc) + if ((usbep->name == ep0_string) || !ep->ep.desc) return -EINVAL; spin_lock_irqsave(&ep->dev->lock, iflags); @@ -1742,7 +1741,6 @@ static int pch_udc_pcd_ep_disable(struct usb_ep *usbep) ep->halted = 1; pch_udc_ep_disable(ep); pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); - ep->desc = NULL; ep->ep.desc = NULL; INIT_LIST_HEAD(&ep->queue); spin_unlock_irqrestore(&ep->dev->lock, iflags); @@ -1849,7 +1847,7 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, return -EINVAL; ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!ep->desc && ep->num) + if (!ep->ep.desc && ep->num) return -EINVAL; req = container_of(usbreq, struct pch_udc_request, req); if (!list_empty(&req->queue)) @@ -1949,7 +1947,7 @@ static int pch_udc_pcd_dequeue(struct usb_ep *usbep, ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!usbep || !usbreq || (!ep->desc && ep->num)) + if (!usbep || !usbreq || (!ep->ep.desc && ep->num)) return ret; req = container_of(usbreq, struct pch_udc_request, req); spin_lock_irqsave(&ep->dev->lock, flags); @@ -1988,7 +1986,7 @@ static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt) return -EINVAL; ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!ep->desc && !ep->num) + if (!ep->ep.desc && !ep->num) return -EINVAL; if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; @@ -2033,7 +2031,7 @@ static int pch_udc_pcd_set_wedge(struct usb_ep *usbep) return -EINVAL; ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!ep->desc && !ep->num) + if (!ep->ep.desc && !ep->num) return -EINVAL; if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; @@ -2065,7 +2063,7 @@ static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep) return; ep = container_of(usbep, struct pch_udc_ep, ep); - if (ep->desc || !ep->num) + if (ep->ep.desc || !ep->num) pch_udc_ep_fifo_flush(ep, ep->in); } @@ -3282,7 +3280,6 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id); - static struct pci_driver pch_udc_driver = { .name = KBUILD_MODNAME, .id_table = pch_udc_pcidev_id, @@ -3293,17 +3290,7 @@ static struct pci_driver pch_udc_driver = { .shutdown = pch_udc_shutdown, }; -static int __init pch_udc_pci_init(void) -{ - return pci_register_driver(&pch_udc_driver); -} -module_init(pch_udc_pci_init); - -static void __exit pch_udc_pci_exit(void) -{ - pci_unregister_driver(&pch_udc_driver); -} -module_exit(pch_udc_pci_exit); +module_pci_driver(pch_udc_driver); MODULE_DESCRIPTION("Intel EG20T USB Device Controller"); MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>"); diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 4e4dc1f5f388..f1f9290a2f47 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -51,6 +51,7 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ +#include "composite.c" #include "usbstring.c" #include "config.c" #include "epautoconf.c" @@ -75,8 +76,6 @@ struct printer_dev { /* lock buffer lists during read/write calls */ struct mutex lock_printer_io; struct usb_gadget *gadget; - struct usb_request *req; /* for control responses */ - u8 config; s8 interface; struct usb_ep *in_ep, *out_ep; @@ -100,6 +99,7 @@ struct printer_dev { struct device *pdev; u8 printer_cdev_open; wait_queue_head_t wait; + struct usb_function function; }; static struct printer_dev usb_printer_gadget; @@ -120,26 +120,6 @@ static struct printer_dev usb_printer_gadget; * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ -static ushort idVendor; -module_param(idVendor, ushort, S_IRUGO); -MODULE_PARM_DESC(idVendor, "USB Vendor ID"); - -static ushort idProduct; -module_param(idProduct, ushort, S_IRUGO); -MODULE_PARM_DESC(idProduct, "USB Product ID"); - -static ushort bcdDevice; -module_param(bcdDevice, ushort, S_IRUGO); -MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); - -static char *iManufacturer; -module_param(iManufacturer, charp, S_IRUGO); -MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); - -static char *iProduct; -module_param(iProduct, charp, S_IRUGO); -MODULE_PARM_DESC(iProduct, "USB Product string"); - static char *iSerialNum; module_param(iSerialNum, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); @@ -154,47 +134,8 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); #define QLEN qlen -#ifdef CONFIG_USB_GADGET_DUALSPEED -#define DEVSPEED USB_SPEED_HIGH -#else /* full speed (low speed doesn't do bulk) */ -#define DEVSPEED USB_SPEED_FULL -#endif - /*-------------------------------------------------------------------------*/ -#define xprintk(d, level, fmt, args...) \ - printk(level "%s: " fmt, DRIVER_DESC, ## args) - -#ifdef DEBUG -#define DBG(dev, fmt, args...) \ - xprintk(dev, KERN_DEBUG, fmt, ## args) -#else -#define DBG(dev, fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE -#define VDBG(dev, fmt, args...) \ - xprintk(dev, KERN_DEBUG, fmt, ## args) -#else -#define VDBG(dev, fmt, args...) \ - do { } while (0) -#endif /* VERBOSE */ - -#define ERROR(dev, fmt, args...) \ - xprintk(dev, KERN_ERR, fmt, ## args) -#define WARNING(dev, fmt, args...) \ - xprintk(dev, KERN_WARNING, fmt, ## args) -#define INFO(dev, fmt, args...) \ - xprintk(dev, KERN_INFO, fmt, ## args) - -/*-------------------------------------------------------------------------*/ - -/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly - * ep0 implementation: descriptors, config management, setup(). - * also optional class-specific notification interrupt transfer. - */ - /* * DESCRIPTORS ... most are static, but strings and (full) configuration * descriptors are built on demand. @@ -227,24 +168,6 @@ static struct usb_device_descriptor device_desc = { .bNumConfigurations = 1 }; -static struct usb_otg_descriptor otg_desc = { - .bLength = sizeof otg_desc, - .bDescriptorType = USB_DT_OTG, - .bmAttributes = USB_OTG_SRP -}; - -static struct usb_config_descriptor config_desc = { - .bLength = sizeof config_desc, - .bDescriptorType = USB_DT_CONFIG, - - /* compute wTotalLength on the fly */ - .bNumInterfaces = 1, - .bConfigurationValue = DEV_CONFIG_VALUE, - .iConfiguration = 0, - .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -}; - static struct usb_interface_descriptor intf_desc = { .bLength = sizeof intf_desc, .bDescriptorType = USB_DT_INTERFACE, @@ -270,16 +193,13 @@ static struct usb_endpoint_descriptor fs_ep_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK }; -static const struct usb_descriptor_header *fs_printer_function [11] = { - (struct usb_descriptor_header *) &otg_desc, +static struct usb_descriptor_header *fs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &fs_ep_in_desc, (struct usb_descriptor_header *) &fs_ep_out_desc, NULL }; -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. @@ -307,23 +227,26 @@ static struct usb_qualifier_descriptor dev_qualifier = { .bNumConfigurations = 1 }; -static const struct usb_descriptor_header *hs_printer_function [11] = { - (struct usb_descriptor_header *) &otg_desc, +static struct usb_descriptor_header *hs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &hs_ep_in_desc, (struct usb_descriptor_header *) &hs_ep_out_desc, NULL }; -/* maxpacket and other transfer characteristics vary by speed. */ -#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs)) - -#else +static struct usb_otg_descriptor otg_descriptor = { + .bLength = sizeof otg_descriptor, + .bDescriptorType = USB_DT_OTG, + .bmAttributes = USB_OTG_SRP, +}; -/* if there's no high speed support, maxpacket doesn't change. */ -#define ep_desc(g, hs, fs) (((void)(g)), (fs)) +static const struct usb_descriptor_header *otg_desc[] = { + (struct usb_descriptor_header *) &otg_descriptor, + NULL, +}; -#endif /* !CONFIG_USB_GADGET_DUALSPEED */ +/* maxpacket and other transfer characteristics vary by speed. */ +#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs)) /*-------------------------------------------------------------------------*/ @@ -343,11 +266,16 @@ static struct usb_string strings [] = { { } /* end of list */ }; -static struct usb_gadget_strings stringtab = { +static struct usb_gadget_strings stringtab_dev = { .language = 0x0409, /* en-us */ .strings = strings, }; +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; + /*-------------------------------------------------------------------------*/ static struct usb_request * @@ -937,82 +865,8 @@ static void printer_reset_interface(struct printer_dev *dev) dev->interface = -1; } -/* change our operational config. must agree with the code - * that returns config descriptors, and altsetting code. - */ -static int -printer_set_config(struct printer_dev *dev, unsigned number) -{ - int result = 0; - struct usb_gadget *gadget = dev->gadget; - - switch (number) { - case DEV_CONFIG_VALUE: - result = 0; - break; - default: - result = -EINVAL; - /* FALL THROUGH */ - case 0: - break; - } - - if (result) { - usb_gadget_vbus_draw(dev->gadget, - dev->gadget->is_otg ? 8 : 100); - } else { - unsigned power; - - power = 2 * config_desc.bMaxPower; - usb_gadget_vbus_draw(dev->gadget, power); - - dev->config = number; - INFO(dev, "%s config #%d: %d mA, %s\n", - usb_speed_string(gadget->speed), - number, power, driver_desc); - } - return result; -} - -static int -config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index, - int is_otg) -{ - int len; - const struct usb_descriptor_header **function; -#ifdef CONFIG_USB_GADGET_DUALSPEED - int hs = (speed == USB_SPEED_HIGH); - - if (type == USB_DT_OTHER_SPEED_CONFIG) - hs = !hs; - - if (hs) { - function = hs_printer_function; - } else { - function = fs_printer_function; - } -#else - function = fs_printer_function; -#endif - - if (index >= device_desc.bNumConfigurations) - return -EINVAL; - - /* for now, don't advertise srp-only devices */ - if (!is_otg) - function++; - - len = usb_gadget_config_buf(&config_desc, buf, USB_DESC_BUFSIZE, - function); - if (len < 0) - return len; - ((struct usb_config_descriptor *) buf)->bDescriptorType = type; - return len; -} - /* Change our operational Interface. */ -static int -set_interface(struct printer_dev *dev, unsigned number) +static int set_interface(struct printer_dev *dev, unsigned number) { int result = 0; @@ -1043,14 +897,6 @@ set_interface(struct printer_dev *dev, unsigned number) return result; } -static void printer_setup_complete(struct usb_ep *ep, struct usb_request *req) -{ - if (req->status || req->actual != req->length) - DBG((struct printer_dev *) ep->driver_data, - "setup complete --> %d, %d/%d\n", - req->status, req->actual, req->length); -} - static void printer_soft_reset(struct printer_dev *dev) { struct usb_request *req; @@ -1107,11 +953,12 @@ static void printer_soft_reset(struct printer_dev *dev) * The setup() callback implements all the ep0 functionality that's not * handled lower down. */ -static int -printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +static int printer_func_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) { - struct printer_dev *dev = get_gadget_data(gadget); - struct usb_request *req = dev->req; + struct printer_dev *dev = container_of(f, struct printer_dev, function); + struct usb_composite_dev *cdev = f->config->cdev; + struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); @@ -1120,102 +967,7 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); - req->complete = printer_setup_complete; - switch (ctrl->bRequestType&USB_TYPE_MASK) { - - case USB_TYPE_STANDARD: - switch (ctrl->bRequest) { - - case USB_REQ_GET_DESCRIPTOR: - if (ctrl->bRequestType != USB_DIR_IN) - break; - switch (wValue >> 8) { - - case USB_DT_DEVICE: - device_desc.bMaxPacketSize0 = - gadget->ep0->maxpacket; - value = min(wLength, (u16) sizeof device_desc); - memcpy(req->buf, &device_desc, value); - break; -#ifdef CONFIG_USB_GADGET_DUALSPEED - case USB_DT_DEVICE_QUALIFIER: - if (!gadget_is_dualspeed(gadget)) - break; - /* - * assumes ep0 uses the same value for both - * speeds - */ - dev_qualifier.bMaxPacketSize0 = - gadget->ep0->maxpacket; - value = min(wLength, - (u16) sizeof dev_qualifier); - memcpy(req->buf, &dev_qualifier, value); - break; - - case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget_is_dualspeed(gadget)) - break; - /* FALLTHROUGH */ -#endif /* CONFIG_USB_GADGET_DUALSPEED */ - case USB_DT_CONFIG: - value = config_buf(gadget->speed, req->buf, - wValue >> 8, - wValue & 0xff, - gadget->is_otg); - if (value >= 0) - value = min(wLength, (u16) value); - break; - - case USB_DT_STRING: - value = usb_gadget_get_string(&stringtab, - wValue & 0xff, req->buf); - if (value >= 0) - value = min(wLength, (u16) value); - break; - } - break; - - case USB_REQ_SET_CONFIGURATION: - if (ctrl->bRequestType != 0) - break; - if (gadget->a_hnp_support) - DBG(dev, "HNP available\n"); - else if (gadget->a_alt_hnp_support) - DBG(dev, "HNP needs a different root port\n"); - value = printer_set_config(dev, wValue); - if (!value) - value = set_interface(dev, PRINTER_INTERFACE); - break; - case USB_REQ_GET_CONFIGURATION: - if (ctrl->bRequestType != USB_DIR_IN) - break; - *(u8 *)req->buf = dev->config; - value = min(wLength, (u16) 1); - break; - - case USB_REQ_SET_INTERFACE: - if (ctrl->bRequestType != USB_RECIP_INTERFACE || - !dev->config) - break; - - value = set_interface(dev, PRINTER_INTERFACE); - break; - case USB_REQ_GET_INTERFACE: - if (ctrl->bRequestType != - (USB_DIR_IN|USB_RECIP_INTERFACE) - || !dev->config) - break; - - *(u8 *)req->buf = dev->interface; - value = min(wLength, (u16) 1); - break; - - default: - goto unknown; - } - break; - case USB_TYPE_CLASS: switch (ctrl->bRequest) { case 0: /* Get the IEEE-1284 PNP String */ @@ -1261,44 +1013,50 @@ unknown: wValue, wIndex, wLength); break; } - - /* respond with data transfer before status phase? */ - if (value >= 0) { - req->length = value; - req->zero = value < wLength; - value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); - if (value < 0) { - DBG(dev, "ep_queue --> %d\n", value); - req->status = 0; - printer_setup_complete(gadget->ep0, req); - } - } - /* host either stalls (value < 0) or reports success */ return value; } -static void -printer_disconnect(struct usb_gadget *gadget) +static int __init printer_func_bind(struct usb_configuration *c, + struct usb_function *f) { - struct printer_dev *dev = get_gadget_data(gadget); + return 0; +} + +static void printer_func_unbind(struct usb_configuration *c, + struct usb_function *f) +{ +} + +static int printer_func_set_alt(struct usb_function *f, + unsigned intf, unsigned alt) +{ + struct printer_dev *dev = container_of(f, struct printer_dev, function); + int ret = -ENOTSUPP; + + if (!alt) + ret = set_interface(dev, PRINTER_INTERFACE); + return ret; +} + +static void printer_func_disable(struct usb_function *f) +{ + struct printer_dev *dev = container_of(f, struct printer_dev, function); unsigned long flags; DBG(dev, "%s\n", __func__); spin_lock_irqsave(&dev->lock, flags); - printer_reset_interface(dev); - spin_unlock_irqrestore(&dev->lock, flags); } -static void -printer_unbind(struct usb_gadget *gadget) +static void printer_cfg_unbind(struct usb_configuration *c) { - struct printer_dev *dev = get_gadget_data(gadget); + struct printer_dev *dev; struct usb_request *req; + dev = &usb_printer_gadget; DBG(dev, "%s\n", __func__); @@ -1336,18 +1094,18 @@ printer_unbind(struct usb_gadget *gadget) list_del(&req->list); printer_req_free(dev->out_ep, req); } - - if (dev->req) { - printer_req_free(gadget->ep0, dev->req); - dev->req = NULL; - } - - set_gadget_data(gadget, NULL); } -static int __init -printer_bind(struct usb_gadget *gadget) +static struct usb_configuration printer_cfg_driver = { + .label = "printer", + .unbind = printer_cfg_unbind, + .bConfigurationValue = 1, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, +}; + +static int __init printer_bind_config(struct usb_configuration *c) { + struct usb_gadget *gadget = c->cdev->gadget; struct printer_dev *dev; struct usb_ep *in_ep, *out_ep; int status = -ENOMEM; @@ -1358,6 +1116,14 @@ printer_bind(struct usb_gadget *gadget) dev = &usb_printer_gadget; + dev->function.name = shortname; + dev->function.descriptors = fs_printer_function; + dev->function.hs_descriptors = hs_printer_function; + dev->function.bind = printer_func_bind; + dev->function.setup = printer_func_setup; + dev->function.unbind = printer_func_unbind; + dev->function.set_alt = printer_func_set_alt; + dev->function.disable = printer_func_disable; /* Setup the sysfs files for the printer gadget. */ dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, @@ -1393,29 +1159,6 @@ printer_bind(struct usb_gadget *gadget) init_utsname()->sysname, init_utsname()->release, gadget->name); - device_desc.idVendor = - cpu_to_le16(PRINTER_VENDOR_NUM); - device_desc.idProduct = - cpu_to_le16(PRINTER_PRODUCT_NUM); - - /* support optional vendor/distro customization */ - if (idVendor) { - if (!idProduct) { - dev_err(&gadget->dev, "idVendor needs idProduct!\n"); - return -ENODEV; - } - device_desc.idVendor = cpu_to_le16(idVendor); - device_desc.idProduct = cpu_to_le16(idProduct); - if (bcdDevice) - device_desc.bcdDevice = cpu_to_le16(bcdDevice); - } - - if (iManufacturer) - strlcpy(manufacturer, iManufacturer, sizeof manufacturer); - - if (iProduct) - strlcpy(product_desc, iProduct, sizeof product_desc); - if (iSerialNum) strlcpy(serial_num, iSerialNum, sizeof serial_num); @@ -1442,17 +1185,16 @@ autoconf_fail: goto autoconf_fail; out_ep->driver_data = out_ep; /* claim */ -#ifdef CONFIG_USB_GADGET_DUALSPEED /* assumes that all endpoints are dual-speed */ hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; -#endif /* DUALSPEED */ usb_gadget_set_selfpowered(gadget); if (gadget->is_otg) { - otg_desc.bmAttributes |= USB_OTG_HNP, - config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + otg_descriptor.bmAttributes |= USB_OTG_HNP; + printer_cfg_driver.descriptors = otg_desc; + printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } spin_lock_init(&dev->lock); @@ -1466,7 +1208,6 @@ autoconf_fail: init_waitqueue_head(&dev->tx_wait); init_waitqueue_head(&dev->tx_flush_wait); - dev->config = 0; dev->interface = -1; dev->printer_cdev_open = 0; dev->printer_status = PRINTER_NOT_ERROR; @@ -1477,14 +1218,6 @@ autoconf_fail: dev->in_ep = in_ep; dev->out_ep = out_ep; - /* preallocate control message data and buffer */ - dev->req = printer_req_alloc(gadget->ep0, USB_DESC_BUFSIZE, - GFP_KERNEL); - if (!dev->req) { - status = -ENOMEM; - goto fail; - } - for (i = 0; i < QLEN; i++) { req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); if (!req) { @@ -1513,45 +1246,37 @@ autoconf_fail: list_add(&req->list, &dev->rx_reqs); } - dev->req->complete = printer_setup_complete; - /* finish hookup to lower layer ... */ dev->gadget = gadget; - set_gadget_data(gadget, dev); - gadget->ep0->driver_data = dev; INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name, in_ep->name); - return 0; fail: - printer_unbind(gadget); + printer_cfg_unbind(c); return status; } -/*-------------------------------------------------------------------------*/ +static int printer_unbind(struct usb_composite_dev *cdev) +{ + return 0; +} -static struct usb_gadget_driver printer_driver = { - .max_speed = DEVSPEED, +static int __init printer_bind(struct usb_composite_dev *cdev) +{ + return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); +} - .function = (char *) driver_desc, +static struct usb_composite_driver printer_driver = { + .name = shortname, + .dev = &device_desc, + .strings = dev_strings, + .max_speed = USB_SPEED_HIGH, .unbind = printer_unbind, - - .setup = printer_setup, - .disconnect = printer_disconnect, - - .driver = { - .name = (char *) shortname, - .owner = THIS_MODULE, - }, }; -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Craig Nadler"); -MODULE_LICENSE("GPL"); - static int __init init(void) { @@ -1560,23 +1285,23 @@ init(void) usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); if (IS_ERR(usb_gadget_class)) { status = PTR_ERR(usb_gadget_class); - ERROR(dev, "unable to create usb_gadget class %d\n", status); + pr_err("unable to create usb_gadget class %d\n", status); return status; } status = alloc_chrdev_region(&g_printer_devno, 0, 1, "USB printer gadget"); if (status) { - ERROR(dev, "alloc_chrdev_region %d\n", status); + pr_err("alloc_chrdev_region %d\n", status); class_destroy(usb_gadget_class); return status; } - status = usb_gadget_probe_driver(&printer_driver, printer_bind); + status = usb_composite_probe(&printer_driver, printer_bind); if (status) { class_destroy(usb_gadget_class); unregister_chrdev_region(g_printer_devno, 1); - DBG(dev, "usb_gadget_probe_driver %x\n", status); + pr_err("usb_gadget_probe_driver %x\n", status); } return status; @@ -1586,15 +1311,14 @@ module_init(init); static void __exit cleanup(void) { - int status; - mutex_lock(&usb_printer_gadget.lock_printer_io); - status = usb_gadget_unregister_driver(&printer_driver); - if (status) - ERROR(dev, "usb_gadget_unregister_driver %x\n", status); - + usb_composite_unregister(&printer_driver); unregister_chrdev_region(g_printer_devno, 1); class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Craig Nadler"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 41ed69c96d8c..f7ff9e8e746a 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -218,7 +218,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, struct pxa25x_udc *dev; ep = container_of (_ep, struct pxa25x_ep, ep); - if (!_ep || !desc || ep->desc || _ep->name == ep0name + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->fifo_size < usb_endpoint_maxp (desc)) { @@ -249,7 +249,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, return -ESHUTDOWN; } - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; ep->pio_irqs = 0; ep->ep.maxpacket = usb_endpoint_maxp (desc); @@ -269,7 +269,7 @@ static int pxa25x_ep_disable (struct usb_ep *_ep) unsigned long flags; ep = container_of (_ep, struct pxa25x_ep, ep); - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { DMSG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; @@ -281,7 +281,6 @@ static int pxa25x_ep_disable (struct usb_ep *_ep) /* flush fifo (mostly for IN buffers) */ pxa25x_ep_fifo_flush (_ep); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; @@ -390,7 +389,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) { unsigned max; - max = usb_endpoint_maxp(ep->desc); + max = usb_endpoint_maxp(ep->ep.desc); do { unsigned count; int is_last, is_short; @@ -644,7 +643,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) } ep = container_of(_ep, struct pxa25x_ep, ep); - if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { DMSG("%s, bad ep\n", __func__); return -EINVAL; } @@ -660,7 +659,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) * we can report per-packet status. that also helps with dma. */ if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - && req->req.length > usb_endpoint_maxp (ep->desc))) + && req->req.length > usb_endpoint_maxp(ep->ep.desc))) return -EMSGSIZE; DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", @@ -673,7 +672,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* kickstart this i/o queue? */ if (list_empty(&ep->queue) && !ep->stopped) { - if (ep->desc == NULL/* ep0 */) { + if (ep->ep.desc == NULL/* ep0 */) { unsigned length = _req->length; switch (dev->ep0state) { @@ -722,7 +721,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) req = NULL; } - if (likely (req && ep->desc)) + if (likely(req && ep->ep.desc)) pio_irq_enable(ep->bEndpointAddress); } @@ -749,7 +748,7 @@ static void nuke(struct pxa25x_ep *ep, int status) queue); done(ep, req, status); } - if (ep->desc) + if (ep->ep.desc) pio_irq_disable (ep->bEndpointAddress); } @@ -792,7 +791,7 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value) ep = container_of(_ep, struct pxa25x_ep, ep); if (unlikely (!_ep - || (!ep->desc && ep->ep.name != ep0name)) + || (!ep->ep.desc && ep->ep.name != ep0name)) || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { DMSG("%s, bad ep\n", __func__); return -EINVAL; @@ -820,7 +819,7 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value) *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF; /* ep0 needs special care */ - if (!ep->desc) { + if (!ep->ep.desc) { start_watchdog(ep->dev); ep->dev->req_pending = 0; ep->dev->ep0state = EP0_STALL; @@ -1087,7 +1086,7 @@ udc_seq_show(struct seq_file *m, void *_d) if (i != 0) { const struct usb_endpoint_descriptor *desc; - desc = ep->desc; + desc = ep->ep.desc; if (!desc) continue; tmp = *dev->ep [i].reg_udccs; @@ -1191,7 +1190,6 @@ static void udc_reinit(struct pxa25x_udc *dev) if (i != 0) list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 0; INIT_LIST_HEAD (&ep->queue); diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index 893e917f048e..861f4df6ea22 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -41,7 +41,6 @@ struct pxa25x_ep { struct usb_ep ep; struct pxa25x_udc *dev; - const struct usb_endpoint_descriptor *desc; struct list_head queue; unsigned long pio_irqs; diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index c4401e7dd3a6..f3ac2a20c27c 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -459,7 +459,7 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, unsigned char *counter; int ret; - ep->desc = desc; + ep->ep.desc = desc; if (ep->pipenum) /* already allocated pipe */ return 0; @@ -648,7 +648,7 @@ static int sudmac_alloc_channel(struct r8a66597 *r8a66597, /* set SUDMAC parameters */ dma = &r8a66597->dma; dma->used = 1; - if (ep->desc->bEndpointAddress & USB_DIR_IN) { + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) { dma->dir = 1; } else { dma->dir = 0; @@ -770,7 +770,7 @@ static void start_packet_read(struct r8a66597_ep *ep, static void start_packet(struct r8a66597_ep *ep, struct r8a66597_request *req) { - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) start_packet_write(ep, req); else start_packet_read(ep, req); @@ -930,7 +930,7 @@ __acquires(r8a66597->lock) if (restart) { req = get_request_from_ep(ep); - if (ep->desc) + if (ep->ep.desc) start_packet(ep, req); } } @@ -1116,7 +1116,7 @@ static void irq_pipe_ready(struct r8a66597 *r8a66597, u16 status, u16 enb) r8a66597_write(r8a66597, ~check, BRDYSTS); ep = r8a66597->pipenum2ep[pipenum]; req = get_request_from_ep(ep); - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) irq_packet_write(ep, req); else irq_packet_read(ep, req); @@ -1170,7 +1170,7 @@ __acquires(r8a66597->lock) switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_DEVICE: - status = 1 << USB_DEVICE_SELF_POWERED; + status = r8a66597->device_status; break; case USB_RECIP_INTERFACE: status = 0; @@ -1627,7 +1627,7 @@ static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == NULL) /* control */ + if (ep->ep.desc == NULL) /* control */ start_ep0(ep, req); else { if (request && !ep->busy) @@ -1692,7 +1692,7 @@ static int r8a66597_set_wedge(struct usb_ep *_ep) ep = container_of(_ep, struct r8a66597_ep, ep); - if (!ep || !ep->desc) + if (!ep || !ep->ep.desc) return -EINVAL; spin_lock_irqsave(&ep->r8a66597->lock, flags); @@ -1800,11 +1800,24 @@ static int r8a66597_pullup(struct usb_gadget *gadget, int is_on) return 0; } +static int r8a66597_set_selfpowered(struct usb_gadget *gadget, int is_self) +{ + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); + + if (is_self) + r8a66597->device_status |= 1 << USB_DEVICE_SELF_POWERED; + else + r8a66597->device_status &= ~(1 << USB_DEVICE_SELF_POWERED); + + return 0; +} + static struct usb_gadget_ops r8a66597_gadget_ops = { .get_frame = r8a66597_get_frame, .udc_start = r8a66597_start, .udc_stop = r8a66597_stop, .pullup = r8a66597_pullup, + .set_selfpowered = r8a66597_set_selfpowered, }; static int __exit r8a66597_remove(struct platform_device *pdev) diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h index 8e3de61cd4b8..99908c76ccd1 100644 --- a/drivers/usb/gadget/r8a66597-udc.h +++ b/drivers/usb/gadget/r8a66597-udc.h @@ -72,7 +72,7 @@ struct r8a66597_ep { unsigned use_dma:1; u16 pipenum; u16 type; - const struct usb_endpoint_descriptor *desc; + /* register address */ unsigned char fifoaddr; unsigned char fifosel; @@ -111,6 +111,7 @@ struct r8a66597 { u16 old_vbus; u16 scount; u16 old_dvsq; + u16 device_status; /* for GET_STATUS */ /* pipe config */ unsigned char bulk; diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 73a934a170d1..b35babed6fcb 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -73,65 +73,65 @@ static rndis_resp_t *rndis_add_response(int configNr, u32 length); static const u32 oid_supported_list[] = { /* the general stuff */ - OID_GEN_SUPPORTED_LIST, - OID_GEN_HARDWARE_STATUS, - OID_GEN_MEDIA_SUPPORTED, - OID_GEN_MEDIA_IN_USE, - OID_GEN_MAXIMUM_FRAME_SIZE, - OID_GEN_LINK_SPEED, - OID_GEN_TRANSMIT_BLOCK_SIZE, - OID_GEN_RECEIVE_BLOCK_SIZE, - OID_GEN_VENDOR_ID, - OID_GEN_VENDOR_DESCRIPTION, - OID_GEN_VENDOR_DRIVER_VERSION, - OID_GEN_CURRENT_PACKET_FILTER, - OID_GEN_MAXIMUM_TOTAL_SIZE, - OID_GEN_MEDIA_CONNECT_STATUS, - OID_GEN_PHYSICAL_MEDIUM, + RNDIS_OID_GEN_SUPPORTED_LIST, + RNDIS_OID_GEN_HARDWARE_STATUS, + RNDIS_OID_GEN_MEDIA_SUPPORTED, + RNDIS_OID_GEN_MEDIA_IN_USE, + RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE, + RNDIS_OID_GEN_LINK_SPEED, + RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE, + RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE, + RNDIS_OID_GEN_VENDOR_ID, + RNDIS_OID_GEN_VENDOR_DESCRIPTION, + RNDIS_OID_GEN_VENDOR_DRIVER_VERSION, + RNDIS_OID_GEN_CURRENT_PACKET_FILTER, + RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE, + RNDIS_OID_GEN_MEDIA_CONNECT_STATUS, + RNDIS_OID_GEN_PHYSICAL_MEDIUM, /* the statistical stuff */ - OID_GEN_XMIT_OK, - OID_GEN_RCV_OK, - OID_GEN_XMIT_ERROR, - OID_GEN_RCV_ERROR, - OID_GEN_RCV_NO_BUFFER, + RNDIS_OID_GEN_XMIT_OK, + RNDIS_OID_GEN_RCV_OK, + RNDIS_OID_GEN_XMIT_ERROR, + RNDIS_OID_GEN_RCV_ERROR, + RNDIS_OID_GEN_RCV_NO_BUFFER, #ifdef RNDIS_OPTIONAL_STATS - OID_GEN_DIRECTED_BYTES_XMIT, - OID_GEN_DIRECTED_FRAMES_XMIT, - OID_GEN_MULTICAST_BYTES_XMIT, - OID_GEN_MULTICAST_FRAMES_XMIT, - OID_GEN_BROADCAST_BYTES_XMIT, - OID_GEN_BROADCAST_FRAMES_XMIT, - OID_GEN_DIRECTED_BYTES_RCV, - OID_GEN_DIRECTED_FRAMES_RCV, - OID_GEN_MULTICAST_BYTES_RCV, - OID_GEN_MULTICAST_FRAMES_RCV, - OID_GEN_BROADCAST_BYTES_RCV, - OID_GEN_BROADCAST_FRAMES_RCV, - OID_GEN_RCV_CRC_ERROR, - OID_GEN_TRANSMIT_QUEUE_LENGTH, + RNDIS_OID_GEN_DIRECTED_BYTES_XMIT, + RNDIS_OID_GEN_DIRECTED_FRAMES_XMIT, + RNDIS_OID_GEN_MULTICAST_BYTES_XMIT, + RNDIS_OID_GEN_MULTICAST_FRAMES_XMIT, + RNDIS_OID_GEN_BROADCAST_BYTES_XMIT, + RNDIS_OID_GEN_BROADCAST_FRAMES_XMIT, + RNDIS_OID_GEN_DIRECTED_BYTES_RCV, + RNDIS_OID_GEN_DIRECTED_FRAMES_RCV, + RNDIS_OID_GEN_MULTICAST_BYTES_RCV, + RNDIS_OID_GEN_MULTICAST_FRAMES_RCV, + RNDIS_OID_GEN_BROADCAST_BYTES_RCV, + RNDIS_OID_GEN_BROADCAST_FRAMES_RCV, + RNDIS_OID_GEN_RCV_CRC_ERROR, + RNDIS_OID_GEN_TRANSMIT_QUEUE_LENGTH, #endif /* RNDIS_OPTIONAL_STATS */ /* mandatory 802.3 */ /* the general stuff */ - OID_802_3_PERMANENT_ADDRESS, - OID_802_3_CURRENT_ADDRESS, - OID_802_3_MULTICAST_LIST, - OID_802_3_MAC_OPTIONS, - OID_802_3_MAXIMUM_LIST_SIZE, + RNDIS_OID_802_3_PERMANENT_ADDRESS, + RNDIS_OID_802_3_CURRENT_ADDRESS, + RNDIS_OID_802_3_MULTICAST_LIST, + RNDIS_OID_802_3_MAC_OPTIONS, + RNDIS_OID_802_3_MAXIMUM_LIST_SIZE, /* the statistical stuff */ - OID_802_3_RCV_ERROR_ALIGNMENT, - OID_802_3_XMIT_ONE_COLLISION, - OID_802_3_XMIT_MORE_COLLISIONS, + RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT, + RNDIS_OID_802_3_XMIT_ONE_COLLISION, + RNDIS_OID_802_3_XMIT_MORE_COLLISIONS, #ifdef RNDIS_OPTIONAL_STATS - OID_802_3_XMIT_DEFERRED, - OID_802_3_XMIT_MAX_COLLISIONS, - OID_802_3_RCV_OVERRUN, - OID_802_3_XMIT_UNDERRUN, - OID_802_3_XMIT_HEARTBEAT_FAILURE, - OID_802_3_XMIT_TIMES_CRS_LOST, - OID_802_3_XMIT_LATE_COLLISIONS, + RNDIS_OID_802_3_XMIT_DEFERRED, + RNDIS_OID_802_3_XMIT_MAX_COLLISIONS, + RNDIS_OID_802_3_RCV_OVERRUN, + RNDIS_OID_802_3_XMIT_UNDERRUN, + RNDIS_OID_802_3_XMIT_HEARTBEAT_FAILURE, + RNDIS_OID_802_3_XMIT_TIMES_CRS_LOST, + RNDIS_OID_802_3_XMIT_LATE_COLLISIONS, #endif /* RNDIS_OPTIONAL_STATS */ #ifdef RNDIS_PM @@ -200,8 +200,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* general oids (table 4-1) */ /* mandatory */ - case OID_GEN_SUPPORTED_LIST: - pr_debug("%s: OID_GEN_SUPPORTED_LIST\n", __func__); + case RNDIS_OID_GEN_SUPPORTED_LIST: + pr_debug("%s: RNDIS_OID_GEN_SUPPORTED_LIST\n", __func__); length = sizeof(oid_supported_list); count = length / sizeof(u32); for (i = 0; i < count; i++) @@ -210,8 +210,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_HARDWARE_STATUS: - pr_debug("%s: OID_GEN_HARDWARE_STATUS\n", __func__); + case RNDIS_OID_GEN_HARDWARE_STATUS: + pr_debug("%s: RNDIS_OID_GEN_HARDWARE_STATUS\n", __func__); /* Bogus question! * Hardware must be ready to receive high level protocols. * BTW: @@ -223,23 +223,23 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_MEDIA_SUPPORTED: - pr_debug("%s: OID_GEN_MEDIA_SUPPORTED\n", __func__); + case RNDIS_OID_GEN_MEDIA_SUPPORTED: + pr_debug("%s: RNDIS_OID_GEN_MEDIA_SUPPORTED\n", __func__); *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); retval = 0; break; /* mandatory */ - case OID_GEN_MEDIA_IN_USE: - pr_debug("%s: OID_GEN_MEDIA_IN_USE\n", __func__); + case RNDIS_OID_GEN_MEDIA_IN_USE: + pr_debug("%s: RNDIS_OID_GEN_MEDIA_IN_USE\n", __func__); /* one medium, one transport... (maybe you do it better) */ *outbuf = cpu_to_le32(rndis_per_dev_params[configNr].medium); retval = 0; break; /* mandatory */ - case OID_GEN_MAXIMUM_FRAME_SIZE: - pr_debug("%s: OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__); + case RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE: + pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__); if (rndis_per_dev_params[configNr].dev) { *outbuf = cpu_to_le32( rndis_per_dev_params[configNr].dev->mtu); @@ -248,11 +248,11 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_LINK_SPEED: + case RNDIS_OID_GEN_LINK_SPEED: if (rndis_debug > 1) - pr_debug("%s: OID_GEN_LINK_SPEED\n", __func__); + pr_debug("%s: RNDIS_OID_GEN_LINK_SPEED\n", __func__); if (rndis_per_dev_params[configNr].media_state - == NDIS_MEDIA_STATE_DISCONNECTED) + == RNDIS_MEDIA_STATE_DISCONNECTED) *outbuf = cpu_to_le32(0); else *outbuf = cpu_to_le32( @@ -261,8 +261,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_TRANSMIT_BLOCK_SIZE: - pr_debug("%s: OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__); + case RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE: + pr_debug("%s: RNDIS_OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__); if (rndis_per_dev_params[configNr].dev) { *outbuf = cpu_to_le32( rndis_per_dev_params[configNr].dev->mtu); @@ -271,8 +271,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_RECEIVE_BLOCK_SIZE: - pr_debug("%s: OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__); + case RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE: + pr_debug("%s: RNDIS_OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__); if (rndis_per_dev_params[configNr].dev) { *outbuf = cpu_to_le32( rndis_per_dev_params[configNr].dev->mtu); @@ -281,16 +281,16 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_VENDOR_ID: - pr_debug("%s: OID_GEN_VENDOR_ID\n", __func__); + case RNDIS_OID_GEN_VENDOR_ID: + pr_debug("%s: RNDIS_OID_GEN_VENDOR_ID\n", __func__); *outbuf = cpu_to_le32( rndis_per_dev_params[configNr].vendorID); retval = 0; break; /* mandatory */ - case OID_GEN_VENDOR_DESCRIPTION: - pr_debug("%s: OID_GEN_VENDOR_DESCRIPTION\n", __func__); + case RNDIS_OID_GEN_VENDOR_DESCRIPTION: + pr_debug("%s: RNDIS_OID_GEN_VENDOR_DESCRIPTION\n", __func__); if (rndis_per_dev_params[configNr].vendorDescr) { length = strlen(rndis_per_dev_params[configNr]. vendorDescr); @@ -303,38 +303,38 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, retval = 0; break; - case OID_GEN_VENDOR_DRIVER_VERSION: - pr_debug("%s: OID_GEN_VENDOR_DRIVER_VERSION\n", __func__); + case RNDIS_OID_GEN_VENDOR_DRIVER_VERSION: + pr_debug("%s: RNDIS_OID_GEN_VENDOR_DRIVER_VERSION\n", __func__); /* Created as LE */ *outbuf = rndis_driver_version; retval = 0; break; /* mandatory */ - case OID_GEN_CURRENT_PACKET_FILTER: - pr_debug("%s: OID_GEN_CURRENT_PACKET_FILTER\n", __func__); + case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: + pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER\n", __func__); *outbuf = cpu_to_le32(*rndis_per_dev_params[configNr].filter); retval = 0; break; /* mandatory */ - case OID_GEN_MAXIMUM_TOTAL_SIZE: - pr_debug("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__); + case RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE: + pr_debug("%s: RNDIS_OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__); *outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE); retval = 0; break; /* mandatory */ - case OID_GEN_MEDIA_CONNECT_STATUS: + case RNDIS_OID_GEN_MEDIA_CONNECT_STATUS: if (rndis_debug > 1) - pr_debug("%s: OID_GEN_MEDIA_CONNECT_STATUS\n", __func__); + pr_debug("%s: RNDIS_OID_GEN_MEDIA_CONNECT_STATUS\n", __func__); *outbuf = cpu_to_le32(rndis_per_dev_params[configNr] .media_state); retval = 0; break; - case OID_GEN_PHYSICAL_MEDIUM: - pr_debug("%s: OID_GEN_PHYSICAL_MEDIUM\n", __func__); + case RNDIS_OID_GEN_PHYSICAL_MEDIUM: + pr_debug("%s: RNDIS_OID_GEN_PHYSICAL_MEDIUM\n", __func__); *outbuf = cpu_to_le32(0); retval = 0; break; @@ -343,20 +343,20 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, * of MS-Windows expect OIDs that aren't specified there. Other * versions emit undefined RNDIS messages. DOCUMENT ALL THESE! */ - case OID_GEN_MAC_OPTIONS: /* from WinME */ - pr_debug("%s: OID_GEN_MAC_OPTIONS\n", __func__); + case RNDIS_OID_GEN_MAC_OPTIONS: /* from WinME */ + pr_debug("%s: RNDIS_OID_GEN_MAC_OPTIONS\n", __func__); *outbuf = cpu_to_le32( - NDIS_MAC_OPTION_RECEIVE_SERIALIZED - | NDIS_MAC_OPTION_FULL_DUPLEX); + RNDIS_MAC_OPTION_RECEIVE_SERIALIZED + | RNDIS_MAC_OPTION_FULL_DUPLEX); retval = 0; break; /* statistics OIDs (table 4-2) */ /* mandatory */ - case OID_GEN_XMIT_OK: + case RNDIS_OID_GEN_XMIT_OK: if (rndis_debug > 1) - pr_debug("%s: OID_GEN_XMIT_OK\n", __func__); + pr_debug("%s: RNDIS_OID_GEN_XMIT_OK\n", __func__); if (stats) { *outbuf = cpu_to_le32(stats->tx_packets - stats->tx_errors - stats->tx_dropped); @@ -365,9 +365,9 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_RCV_OK: + case RNDIS_OID_GEN_RCV_OK: if (rndis_debug > 1) - pr_debug("%s: OID_GEN_RCV_OK\n", __func__); + pr_debug("%s: RNDIS_OID_GEN_RCV_OK\n", __func__); if (stats) { *outbuf = cpu_to_le32(stats->rx_packets - stats->rx_errors - stats->rx_dropped); @@ -376,9 +376,9 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_XMIT_ERROR: + case RNDIS_OID_GEN_XMIT_ERROR: if (rndis_debug > 1) - pr_debug("%s: OID_GEN_XMIT_ERROR\n", __func__); + pr_debug("%s: RNDIS_OID_GEN_XMIT_ERROR\n", __func__); if (stats) { *outbuf = cpu_to_le32(stats->tx_errors); retval = 0; @@ -386,9 +386,9 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_RCV_ERROR: + case RNDIS_OID_GEN_RCV_ERROR: if (rndis_debug > 1) - pr_debug("%s: OID_GEN_RCV_ERROR\n", __func__); + pr_debug("%s: RNDIS_OID_GEN_RCV_ERROR\n", __func__); if (stats) { *outbuf = cpu_to_le32(stats->rx_errors); retval = 0; @@ -396,8 +396,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_GEN_RCV_NO_BUFFER: - pr_debug("%s: OID_GEN_RCV_NO_BUFFER\n", __func__); + case RNDIS_OID_GEN_RCV_NO_BUFFER: + pr_debug("%s: RNDIS_OID_GEN_RCV_NO_BUFFER\n", __func__); if (stats) { *outbuf = cpu_to_le32(stats->rx_dropped); retval = 0; @@ -407,8 +407,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* ieee802.3 OIDs (table 4-3) */ /* mandatory */ - case OID_802_3_PERMANENT_ADDRESS: - pr_debug("%s: OID_802_3_PERMANENT_ADDRESS\n", __func__); + case RNDIS_OID_802_3_PERMANENT_ADDRESS: + pr_debug("%s: RNDIS_OID_802_3_PERMANENT_ADDRESS\n", __func__); if (rndis_per_dev_params[configNr].dev) { length = ETH_ALEN; memcpy(outbuf, @@ -419,8 +419,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_802_3_CURRENT_ADDRESS: - pr_debug("%s: OID_802_3_CURRENT_ADDRESS\n", __func__); + case RNDIS_OID_802_3_CURRENT_ADDRESS: + pr_debug("%s: RNDIS_OID_802_3_CURRENT_ADDRESS\n", __func__); if (rndis_per_dev_params[configNr].dev) { length = ETH_ALEN; memcpy(outbuf, @@ -431,23 +431,23 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_802_3_MULTICAST_LIST: - pr_debug("%s: OID_802_3_MULTICAST_LIST\n", __func__); + case RNDIS_OID_802_3_MULTICAST_LIST: + pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__); /* Multicast base address only */ *outbuf = cpu_to_le32(0xE0000000); retval = 0; break; /* mandatory */ - case OID_802_3_MAXIMUM_LIST_SIZE: - pr_debug("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __func__); + case RNDIS_OID_802_3_MAXIMUM_LIST_SIZE: + pr_debug("%s: RNDIS_OID_802_3_MAXIMUM_LIST_SIZE\n", __func__); /* Multicast base address only */ *outbuf = cpu_to_le32(1); retval = 0; break; - case OID_802_3_MAC_OPTIONS: - pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__); + case RNDIS_OID_802_3_MAC_OPTIONS: + pr_debug("%s: RNDIS_OID_802_3_MAC_OPTIONS\n", __func__); *outbuf = cpu_to_le32(0); retval = 0; break; @@ -455,8 +455,8 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, /* ieee802.3 statistics OIDs (table 4-4) */ /* mandatory */ - case OID_802_3_RCV_ERROR_ALIGNMENT: - pr_debug("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__); + case RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT: + pr_debug("%s: RNDIS_OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__); if (stats) { *outbuf = cpu_to_le32(stats->rx_frame_errors); retval = 0; @@ -464,15 +464,15 @@ static int gen_ndis_query_resp(int configNr, u32 OID, u8 *buf, break; /* mandatory */ - case OID_802_3_XMIT_ONE_COLLISION: - pr_debug("%s: OID_802_3_XMIT_ONE_COLLISION\n", __func__); + case RNDIS_OID_802_3_XMIT_ONE_COLLISION: + pr_debug("%s: RNDIS_OID_802_3_XMIT_ONE_COLLISION\n", __func__); *outbuf = cpu_to_le32(0); retval = 0; break; /* mandatory */ - case OID_802_3_XMIT_MORE_COLLISIONS: - pr_debug("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __func__); + case RNDIS_OID_802_3_XMIT_MORE_COLLISIONS: + pr_debug("%s: RNDIS_OID_802_3_XMIT_MORE_COLLISIONS\n", __func__); *outbuf = cpu_to_le32(0); retval = 0; break; @@ -516,7 +516,7 @@ static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, params = &rndis_per_dev_params[configNr]; switch (OID) { - case OID_GEN_CURRENT_PACKET_FILTER: + case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: /* these NDIS_PACKET_TYPE_* bitflags are shared with * cdc_filter; it's not RNDIS-specific @@ -525,7 +525,7 @@ static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, * MULTICAST, ALL_MULTICAST, BROADCAST */ *params->filter = (u16)get_unaligned_le32(buf); - pr_debug("%s: OID_GEN_CURRENT_PACKET_FILTER %08x\n", + pr_debug("%s: RNDIS_OID_GEN_CURRENT_PACKET_FILTER %08x\n", __func__, *params->filter); /* this call has a significant side effect: it's @@ -545,9 +545,9 @@ static int gen_ndis_set_resp(u8 configNr, u32 OID, u8 *buf, u32 buf_len, } break; - case OID_802_3_MULTICAST_LIST: + case RNDIS_OID_802_3_MULTICAST_LIST: /* I think we can ignore this */ - pr_debug("%s: OID_802_3_MULTICAST_LIST\n", __func__); + pr_debug("%s: RNDIS_OID_802_3_MULTICAST_LIST\n", __func__); retval = 0; break; @@ -577,7 +577,7 @@ static int rndis_init_response(int configNr, rndis_init_msg_type *buf) return -ENOMEM; resp = (rndis_init_cmplt_type *)r->buf; - resp->MessageType = cpu_to_le32(REMOTE_NDIS_INITIALIZE_CMPLT); + resp->MessageType = cpu_to_le32(RNDIS_MSG_INIT_C); resp->MessageLength = cpu_to_le32(52); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); @@ -621,7 +621,7 @@ static int rndis_query_response(int configNr, rndis_query_msg_type *buf) return -ENOMEM; resp = (rndis_query_cmplt_type *)r->buf; - resp->MessageType = cpu_to_le32(REMOTE_NDIS_QUERY_CMPLT); + resp->MessageType = cpu_to_le32(RNDIS_MSG_QUERY_C); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ if (gen_ndis_query_resp(configNr, le32_to_cpu(buf->OID), @@ -668,7 +668,7 @@ static int rndis_set_response(int configNr, rndis_set_msg_type *buf) pr_debug("\n"); #endif - resp->MessageType = cpu_to_le32(REMOTE_NDIS_SET_CMPLT); + resp->MessageType = cpu_to_le32(RNDIS_MSG_SET_C); resp->MessageLength = cpu_to_le32(16); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ if (gen_ndis_set_resp(configNr, le32_to_cpu(buf->OID), @@ -692,7 +692,7 @@ static int rndis_reset_response(int configNr, rndis_reset_msg_type *buf) return -ENOMEM; resp = (rndis_reset_cmplt_type *)r->buf; - resp->MessageType = cpu_to_le32(REMOTE_NDIS_RESET_CMPLT); + resp->MessageType = cpu_to_le32(RNDIS_MSG_RESET_C); resp->MessageLength = cpu_to_le32(16); resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); /* resent information */ @@ -716,8 +716,7 @@ static int rndis_keepalive_response(int configNr, return -ENOMEM; resp = (rndis_keepalive_cmplt_type *)r->buf; - resp->MessageType = cpu_to_le32( - REMOTE_NDIS_KEEPALIVE_CMPLT); + resp->MessageType = cpu_to_le32(RNDIS_MSG_KEEPALIVE_C); resp->MessageLength = cpu_to_le32(16); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ resp->Status = cpu_to_le32(RNDIS_STATUS_SUCCESS); @@ -745,7 +744,7 @@ static int rndis_indicate_status_msg(int configNr, u32 status) return -ENOMEM; resp = (rndis_indicate_status_msg_type *)r->buf; - resp->MessageType = cpu_to_le32(REMOTE_NDIS_INDICATE_STATUS_MSG); + resp->MessageType = cpu_to_le32(RNDIS_MSG_INDICATE); resp->MessageLength = cpu_to_le32(20); resp->Status = cpu_to_le32(status); resp->StatusBufferLength = cpu_to_le32(0); @@ -758,7 +757,7 @@ static int rndis_indicate_status_msg(int configNr, u32 status) int rndis_signal_connect(int configNr) { rndis_per_dev_params[configNr].media_state - = NDIS_MEDIA_STATE_CONNECTED; + = RNDIS_MEDIA_STATE_CONNECTED; return rndis_indicate_status_msg(configNr, RNDIS_STATUS_MEDIA_CONNECT); } @@ -766,7 +765,7 @@ int rndis_signal_connect(int configNr) int rndis_signal_disconnect(int configNr) { rndis_per_dev_params[configNr].media_state - = NDIS_MEDIA_STATE_DISCONNECTED; + = RNDIS_MEDIA_STATE_DISCONNECTED; return rndis_indicate_status_msg(configNr, RNDIS_STATUS_MEDIA_DISCONNECT); } @@ -817,15 +816,15 @@ int rndis_msg_parser(u8 configNr, u8 *buf) /* For USB: responses may take up to 10 seconds */ switch (MsgType) { - case REMOTE_NDIS_INITIALIZE_MSG: - pr_debug("%s: REMOTE_NDIS_INITIALIZE_MSG\n", + case RNDIS_MSG_INIT: + pr_debug("%s: RNDIS_MSG_INIT\n", __func__); params->state = RNDIS_INITIALIZED; return rndis_init_response(configNr, (rndis_init_msg_type *)buf); - case REMOTE_NDIS_HALT_MSG: - pr_debug("%s: REMOTE_NDIS_HALT_MSG\n", + case RNDIS_MSG_HALT: + pr_debug("%s: RNDIS_MSG_HALT\n", __func__); params->state = RNDIS_UNINITIALIZED; if (params->dev) { @@ -834,24 +833,24 @@ int rndis_msg_parser(u8 configNr, u8 *buf) } return 0; - case REMOTE_NDIS_QUERY_MSG: + case RNDIS_MSG_QUERY: return rndis_query_response(configNr, (rndis_query_msg_type *)buf); - case REMOTE_NDIS_SET_MSG: + case RNDIS_MSG_SET: return rndis_set_response(configNr, (rndis_set_msg_type *)buf); - case REMOTE_NDIS_RESET_MSG: - pr_debug("%s: REMOTE_NDIS_RESET_MSG\n", + case RNDIS_MSG_RESET: + pr_debug("%s: RNDIS_MSG_RESET\n", __func__); return rndis_reset_response(configNr, (rndis_reset_msg_type *)buf); - case REMOTE_NDIS_KEEPALIVE_MSG: + case RNDIS_MSG_KEEPALIVE: /* For USB: host does this every 5 seconds */ if (rndis_debug > 1) - pr_debug("%s: REMOTE_NDIS_KEEPALIVE_MSG\n", + pr_debug("%s: RNDIS_MSG_KEEPALIVE\n", __func__); return rndis_keepalive_response(configNr, (rndis_keepalive_msg_type *) @@ -963,7 +962,7 @@ void rndis_add_hdr(struct sk_buff *skb) return; header = (void *)skb_push(skb, sizeof(*header)); memset(header, 0, sizeof *header); - header->MessageType = cpu_to_le32(REMOTE_NDIS_PACKET_MSG); + header->MessageType = cpu_to_le32(RNDIS_MSG_PACKET); header->MessageLength = cpu_to_le32(skb->len); header->DataOffset = cpu_to_le32(36); header->DataLength = cpu_to_le32(skb->len - sizeof(*header)); @@ -1031,7 +1030,7 @@ int rndis_rm_hdr(struct gether *port, __le32 *tmp = (void *)skb->data; /* MessageType, MessageLength */ - if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG) + if (cpu_to_le32(RNDIS_MSG_PACKET) != get_unaligned(tmp++)) { dev_kfree_skb_any(skb); return -EINVAL; @@ -1173,7 +1172,7 @@ int rndis_init(void) rndis_per_dev_params[i].used = 0; rndis_per_dev_params[i].state = RNDIS_UNINITIALIZED; rndis_per_dev_params[i].media_state - = NDIS_MEDIA_STATE_DISCONNECTED; + = RNDIS_MEDIA_STATE_DISCONNECTED; INIT_LIST_HEAD(&(rndis_per_dev_params[i].resp_queue)); } diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h index 907c33008118..0647f2f34e89 100644 --- a/drivers/usb/gadget/rndis.h +++ b/drivers/usb/gadget/rndis.h @@ -15,58 +15,12 @@ #ifndef _LINUX_RNDIS_H #define _LINUX_RNDIS_H +#include <linux/rndis.h> #include "ndis.h" #define RNDIS_MAXIMUM_FRAME_SIZE 1518 #define RNDIS_MAX_TOTAL_SIZE 1558 -/* Remote NDIS Versions */ -#define RNDIS_MAJOR_VERSION 1 -#define RNDIS_MINOR_VERSION 0 - -/* Status Values */ -#define RNDIS_STATUS_SUCCESS 0x00000000U /* Success */ -#define RNDIS_STATUS_FAILURE 0xC0000001U /* Unspecified error */ -#define RNDIS_STATUS_INVALID_DATA 0xC0010015U /* Invalid data */ -#define RNDIS_STATUS_NOT_SUPPORTED 0xC00000BBU /* Unsupported request */ -#define RNDIS_STATUS_MEDIA_CONNECT 0x4001000BU /* Device connected */ -#define RNDIS_STATUS_MEDIA_DISCONNECT 0x4001000CU /* Device disconnected */ -/* For all not specified status messages: - * RNDIS_STATUS_Xxx -> NDIS_STATUS_Xxx - */ - -/* Message Set for Connectionless (802.3) Devices */ -#define REMOTE_NDIS_PACKET_MSG 0x00000001U -#define REMOTE_NDIS_INITIALIZE_MSG 0x00000002U /* Initialize device */ -#define REMOTE_NDIS_HALT_MSG 0x00000003U -#define REMOTE_NDIS_QUERY_MSG 0x00000004U -#define REMOTE_NDIS_SET_MSG 0x00000005U -#define REMOTE_NDIS_RESET_MSG 0x00000006U -#define REMOTE_NDIS_INDICATE_STATUS_MSG 0x00000007U -#define REMOTE_NDIS_KEEPALIVE_MSG 0x00000008U - -/* Message completion */ -#define REMOTE_NDIS_INITIALIZE_CMPLT 0x80000002U -#define REMOTE_NDIS_QUERY_CMPLT 0x80000004U -#define REMOTE_NDIS_SET_CMPLT 0x80000005U -#define REMOTE_NDIS_RESET_CMPLT 0x80000006U -#define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008U - -/* Device Flags */ -#define RNDIS_DF_CONNECTIONLESS 0x00000001U -#define RNDIS_DF_CONNECTION_ORIENTED 0x00000002U - -#define RNDIS_MEDIUM_802_3 0x00000000U - -/* from drivers/net/sk98lin/h/skgepnmi.h */ -#define OID_PNP_CAPABILITIES 0xFD010100 -#define OID_PNP_SET_POWER 0xFD010101 -#define OID_PNP_QUERY_POWER 0xFD010102 -#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 -#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104 -#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 - - typedef struct rndis_init_msg_type { __le32 MessageType; diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 105b206cd844..f4abb0ed9872 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1,4 +1,5 @@ -/* linux/drivers/usb/gadget/s3c-hsotg.c +/** + * linux/drivers/usb/gadget/s3c-hsotg.c * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -13,7 +14,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ #include <linux/kernel.h> #include <linux/module.h> @@ -27,21 +28,25 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/regulator/consumer.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/platform_data/s3c-hsotg.h> #include <mach/map.h> -#include <plat/regs-usb-hsotg-phy.h> -#include <plat/regs-usb-hsotg.h> -#include <mach/regs-sys.h> -#include <plat/udc-hs.h> -#include <plat/cpu.h> +#include "s3c-hsotg.h" #define DMA_ADDR_INVALID (~((dma_addr_t)0)) -/* EP0_MPS_LIMIT +static const char * const s3c_hsotg_supply_names[] = { + "vusb_d", /* digital USB supply, 1.2V */ + "vusb_a", /* analog USB supply, 1.1V */ +}; + +/* + * EP0_MPS_LIMIT * * Unfortunately there seems to be a limit of the amount of data that can * be transferred by IN transactions on EP0. This is either 127 bytes or 3 @@ -125,8 +130,6 @@ struct s3c_hsotg_ep { char name[10]; }; -#define S3C_HSOTG_EPS (8+1) /* limit to 9 for the moment */ - /** * struct s3c_hsotg - driver state. * @dev: The parent device supplied to the probe function @@ -135,7 +138,9 @@ struct s3c_hsotg_ep { * @regs: The memory area mapped for accessing registers. * @regs_res: The resource that was allocated when claiming register space. * @irq: The IRQ number we are using + * @supplies: Definition of USB power supplies * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. + * @num_of_eps: Number of available EPs (excluding EP0) * @debug_root: root directrory for debugfs. * @debug_file: main status file for debugfs. * @debug_fifo: FIFO status file for debugfs. @@ -143,6 +148,8 @@ struct s3c_hsotg_ep { * @ep0_buff: Buffer for EP0 reply data, if needed. * @ctrl_buff: Buffer for EP0 control requests. * @ctrl_req: Request for EP0 control packets. + * @setup: NAK management for EP0 SETUP + * @last_rst: Time of last reset * @eps: The endpoints being supplied to the gadget framework */ struct s3c_hsotg { @@ -155,7 +162,10 @@ struct s3c_hsotg { int irq; struct clk *clk; + struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; + unsigned int dedicated_fifos:1; + unsigned char num_of_eps; struct dentry *debug_root; struct dentry *debug_file; @@ -167,7 +177,9 @@ struct s3c_hsotg { u8 ctrl_buff[8]; struct usb_gadget gadget; - struct s3c_hsotg_ep eps[]; + unsigned int setup; + unsigned long last_rst; + struct s3c_hsotg_ep *eps; }; /** @@ -244,14 +256,14 @@ static inline bool using_dma(struct s3c_hsotg *hsotg) */ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) { - u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK); + u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; new_gsintmsk = gsintmsk | ints; if (new_gsintmsk != gsintmsk) { dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk); - writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK); + writel(new_gsintmsk, hsotg->regs + GINTMSK); } } @@ -262,13 +274,13 @@ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) */ static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints) { - u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK); + u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; new_gsintmsk = gsintmsk & ~ints; if (new_gsintmsk != gsintmsk) - writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK); + writel(new_gsintmsk, hsotg->regs + GINTMSK); } /** @@ -293,12 +305,12 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg, bit <<= 16; local_irq_save(flags); - daint = readl(hsotg->regs + S3C_DAINTMSK); + daint = readl(hsotg->regs + DAINTMSK); if (en) daint |= bit; else daint &= ~bit; - writel(daint, hsotg->regs + S3C_DAINTMSK); + writel(daint, hsotg->regs + DAINTMSK); local_irq_restore(flags); } @@ -314,52 +326,51 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) int timeout; u32 val; - /* the ryu 2.6.24 release ahs - writel(0x1C0, hsotg->regs + S3C_GRXFSIZ); - writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) | - S3C_GNPTXFSIZ_NPTxFDep(0x1C0), - hsotg->regs + S3C_GNPTXFSIZ); - */ - /* set FIFO sizes to 2048/1024 */ - writel(2048, hsotg->regs + S3C_GRXFSIZ); - writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) | - S3C_GNPTXFSIZ_NPTxFDep(1024), - hsotg->regs + S3C_GNPTXFSIZ); + writel(2048, hsotg->regs + GRXFSIZ); + writel(GNPTXFSIZ_NPTxFStAddr(2048) | + GNPTXFSIZ_NPTxFDep(1024), + hsotg->regs + GNPTXFSIZ); - /* arange all the rest of the TX FIFOs, as some versions of this + /* + * arange all the rest of the TX FIFOs, as some versions of this * block have overlapping default addresses. This also ensures * that if the settings have been changed, then they are set to - * known values. */ + * known values. + */ /* start at the end of the GNPTXFSIZ, rounded up */ addr = 2048 + 1024; size = 768; - /* currently we allocate TX FIFOs for all possible endpoints, - * and assume that they are all the same size. */ + /* + * currently we allocate TX FIFOs for all possible endpoints, + * and assume that they are all the same size. + */ for (ep = 1; ep <= 15; ep++) { val = addr; - val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT; + val |= size << DPTXFSIZn_DPTxFSize_SHIFT; addr += size; - writel(val, hsotg->regs + S3C_DPTXFSIZn(ep)); + writel(val, hsotg->regs + DPTXFSIZn(ep)); } - /* according to p428 of the design guide, we need to ensure that - * all fifos are flushed before continuing */ + /* + * according to p428 of the design guide, we need to ensure that + * all fifos are flushed before continuing + */ - writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh | - S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL); + writel(GRSTCTL_TxFNum(0x10) | GRSTCTL_TxFFlsh | + GRSTCTL_RxFFlsh, hsotg->regs + GRSTCTL); /* wait until the fifos are both flushed */ timeout = 100; while (1) { - val = readl(hsotg->regs + S3C_GRSTCTL); + val = readl(hsotg->regs + GRSTCTL); - if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0) + if ((val & (GRSTCTL_TxFFlsh | GRSTCTL_RxFFlsh)) == 0) break; if (--timeout == 0) { @@ -415,7 +426,7 @@ static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep) * * This is the reverse of s3c_hsotg_map_dma(), called for the completion * of a request to ensure the buffer is ready for access by the caller. -*/ + */ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) @@ -456,13 +467,13 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, * otherwise -ENOSPC is returned if the FIFO space was used up. * * This routine is only needed for PIO -*/ + */ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) { bool periodic = is_ep_periodic(hs_ep); - u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS); + u32 gnptxsts = readl(hsotg->regs + GNPTXSTS); int buf_pos = hs_req->req.actual; int to_write = hs_ep->size_loaded; void *data; @@ -476,20 +487,23 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, return 0; if (periodic && !hsotg->dedicated_fifos) { - u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); int size_left; int size_done; - /* work out how much data was loaded so we can calculate - * how much data is left in the fifo. */ + /* + * work out how much data was loaded so we can calculate + * how much data is left in the fifo. + */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + size_left = DxEPTSIZ_XferSize_GET(epsize); - /* if shared fifo, we cannot write anything until the + /* + * if shared fifo, we cannot write anything until the * previous data has been completely sent. */ if (hs_ep->fifo_load != 0) { - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); return -ENOSPC; } @@ -510,47 +524,50 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, __func__, can_write); if (can_write <= 0) { - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); return -ENOSPC; } } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { - can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index)); + can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index)); can_write &= 0xffff; can_write *= 4; } else { - if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { + if (GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { dev_dbg(hsotg->dev, "%s: no queue slots available (0x%08x)\n", __func__, gnptxsts); - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTxFEmp); return -ENOSPC; } - can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); + can_write = GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); can_write *= 4; /* fifo size is in 32bit quantities. */ } dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n", __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket); - /* limit to 512 bytes of data, it seems at least on the non-periodic + /* + * limit to 512 bytes of data, it seems at least on the non-periodic * FIFO, requests of >512 cause the endpoint to get stuck with a * fragment of the end of the transfer in it. */ if (can_write > 512) can_write = 512; - /* limit the write to one max-packet size worth of data, but allow + /* + * limit the write to one max-packet size worth of data, but allow * the transfer to return that it did not run out of fifo space - * doing it. */ + * doing it. + */ if (to_write > hs_ep->ep.maxpacket) { to_write = hs_ep->ep.maxpacket; s3c_hsotg_en_gsint(hsotg, - periodic ? S3C_GINTSTS_PTxFEmp : - S3C_GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } /* see if we can write data */ @@ -559,8 +576,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = can_write; pkt_round = to_write % hs_ep->ep.maxpacket; - /* Not sure, but we probably shouldn't be writing partial - * packets into the FIFO, so round the write down to an + /* + * Round the write down to an * exact number of packets. * * Note, we do not currently check to see if we can ever @@ -570,12 +587,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (pkt_round) to_write -= pkt_round; - /* enable correct FIFO interrupt to alert us when there - * is more room left. */ + /* + * enable correct FIFO interrupt to alert us when there + * is more room left. + */ s3c_hsotg_en_gsint(hsotg, - periodic ? S3C_GINTSTS_PTxFEmp : - S3C_GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", @@ -593,7 +612,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = DIV_ROUND_UP(to_write, 4); data = hs_req->req.buf + buf_pos; - writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write); + writesl(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); return (to_write >= can_write) ? -ENOSPC : 0; } @@ -612,12 +631,12 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) unsigned maxpkt; if (index != 0) { - maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1; - maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1; + maxsize = DxEPTSIZ_XferSize_LIMIT + 1; + maxpkt = DxEPTSIZ_PktCnt_LIMIT + 1; } else { maxsize = 64+64; if (hs_ep->dir_in) - maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1; + maxpkt = DIEPTSIZ0_PktCnt_LIMIT + 1; else maxpkt = 2; } @@ -626,8 +645,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) maxpkt--; maxsize--; - /* constrain by packet count if maxpkts*pktsize is greater - * than the length register size. */ + /* + * constrain by packet count if maxpkts*pktsize is greater + * than the length register size. + */ if ((maxpkt * hs_ep->ep.maxpacket) < maxsize) maxsize = maxpkt * hs_ep->ep.maxpacket; @@ -674,8 +695,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, } } - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); - epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", __func__, readl(hsotg->regs + epctrl_reg), index, @@ -684,13 +705,14 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, /* If endpoint is stalled, we will restart request later */ ctrl = readl(hsotg->regs + epctrl_reg); - if (ctrl & S3C_DxEPCTL_Stall) { + if (ctrl & DxEPCTL_Stall) { dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); return; } length = ureq->length - ureq->actual; - + dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n", + ureq->length, ureq->actual); if (0) dev_dbg(hsotg->dev, "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n", @@ -717,20 +739,22 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, packets = 1; /* send one packet if length is zero. */ if (dir_in && index != 0) - epsize = S3C_DxEPTSIZ_MC(1); + epsize = DxEPTSIZ_MC(1); else epsize = 0; if (index != 0 && ureq->zero) { - /* test for the packets being exactly right for the - * transfer */ + /* + * test for the packets being exactly right for the + * transfer + */ if (length == (packets * hs_ep->ep.maxpacket)) packets++; } - epsize |= S3C_DxEPTSIZ_PktCnt(packets); - epsize |= S3C_DxEPTSIZ_XferSize(length); + epsize |= DxEPTSIZ_PktCnt(packets); + epsize |= DxEPTSIZ_XferSize(length); dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", __func__, packets, length, ureq->length, epsize, epsize_reg); @@ -744,26 +768,38 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, if (using_dma(hsotg) && !continuing) { unsigned int dma_reg; - /* write DMA address to control register, buffer already - * synced by s3c_hsotg_ep_queue(). */ + /* + * write DMA address to control register, buffer already + * synced by s3c_hsotg_ep_queue(). + */ - dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index); + dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); writel(ureq->dma, hsotg->regs + dma_reg); dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n", __func__, ureq->dma, dma_reg); } - ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= S3C_DxEPCTL_USBActEp; - ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ + ctrl |= DxEPCTL_USBActEp; + + dev_dbg(hsotg->dev, "setup req:%d\n", hsotg->setup); + + /* For Setup request do not clear NAK */ + if (hsotg->setup && index == 0) + hsotg->setup = 0; + else + ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); - /* set these, it seems that DMA support increments past the end + /* + * set these, it seems that DMA support increments past the end * of the packet buffer so we need to calculate the length from - * this information. */ + * this information. + */ hs_ep->size_loaded = length; hs_ep->last_load = ureq->actual; @@ -774,17 +810,21 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req); } - /* clear the INTknTXFEmpMsk when we start request, more as a aide - * to debugging to see what is going on. */ + /* + * clear the INTknTXFEmpMsk when we start request, more as a aide + * to debugging to see what is going on. + */ if (dir_in) - writel(S3C_DIEPMSK_INTknTXFEmpMsk, - hsotg->regs + S3C_DIEPINT(index)); + writel(DIEPMSK_INTknTXFEmpMsk, + hsotg->regs + DIEPINT(index)); - /* Note, trying to clear the NAK here causes problems with transmit - * on the S3C6400 ending up with the TXFIFO becoming full. */ + /* + * Note, trying to clear the NAK here causes problems with transmit + * on the S3C6400 ending up with the TXFIFO becoming full. + */ /* check ep is enabled */ - if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna)) + if (!(readl(hsotg->regs + epctrl_reg) & DxEPCTL_EPEna)) dev_warn(hsotg->dev, "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n", index, readl(hsotg->regs + epctrl_reg)); @@ -804,7 +844,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, * then ensure the buffer has been synced to memory. If our buffer has no * DMA memory, then we map the memory and mark our request to allow us to * cleanup on completion. -*/ + */ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct usb_request *req) @@ -922,7 +962,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep, * * Convert the given wIndex into a pointer to an driver endpoint * structure, or return NULL if it is not a valid endpoint. -*/ + */ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, u32 windex) { @@ -933,7 +973,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, if (windex >= 0x100) return NULL; - if (idx > S3C_HSOTG_EPS) + if (idx > hsotg->num_of_eps) return NULL; if (idx && ep->dir_in != dir) @@ -1151,24 +1191,28 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, ctrl->bRequest, ctrl->bRequestType, ctrl->wValue, ctrl->wLength); - /* record the direction of the request, for later use when enquing - * packets onto EP0. */ + /* + * record the direction of the request, for later use when enquing + * packets onto EP0. + */ ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0; dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in); - /* if we've no data with this request, then the last part of the - * transaction is going to implicitly be IN. */ + /* + * if we've no data with this request, then the last part of the + * transaction is going to implicitly be IN. + */ if (ctrl->wLength == 0) ep0->dir_in = 1; if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: - dcfg = readl(hsotg->regs + S3C_DCFG); - dcfg &= ~S3C_DCFG_DevAddr_MASK; - dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT; - writel(dcfg, hsotg->regs + S3C_DCFG); + dcfg = readl(hsotg->regs + DCFG); + dcfg &= ~DCFG_DevAddr_MASK; + dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; + writel(dcfg, hsotg->regs + DCFG); dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); @@ -1194,7 +1238,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); } - /* the request is either unhandlable, or is not formatted correctly + /* + * the request is either unhandlable, or is not formatted correctly * so respond with a STALL for the status stage to indicate failure. */ @@ -1203,22 +1248,26 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, u32 ctrl; dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); - reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0; + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; - /* S3C_DxEPCTL_Stall will be cleared by EP once it has - * taken effect, so no need to clear later. */ + /* + * DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ ctrl = readl(hsotg->regs + reg); - ctrl |= S3C_DxEPCTL_Stall; - ctrl |= S3C_DxEPCTL_CNAK; + ctrl |= DxEPCTL_Stall; + ctrl |= DxEPCTL_CNAK; writel(ctrl, hsotg->regs + reg); dev_dbg(hsotg->dev, "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", ctrl, reg, readl(hsotg->regs + reg)); - /* don't believe we need to anything more to get the EP - * to reply with a STALL packet */ + /* + * don't believe we need to anything more to get the EP + * to reply with a STALL packet + */ } } @@ -1279,8 +1328,10 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC); if (ret < 0) { dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret); - /* Don't think there's much we can do other than watch the - * driver fail. */ + /* + * Don't think there's much we can do other than watch the + * driver fail. + */ } } @@ -1296,7 +1347,7 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) * on the endpoint. * * Note, expects the ep to already be locked as appropriate. -*/ + */ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, @@ -1312,8 +1363,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n", hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete); - /* only replace the status if we've not already set an error - * from a previous transaction */ + /* + * only replace the status if we've not already set an error + * from a previous transaction + */ if (hs_req->req.status == -EINPROGRESS) hs_req->req.status = result; @@ -1324,8 +1377,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, if (using_dma(hsotg)) s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req); - /* call the complete request with the locks off, just in case the - * request tries to queue more work for this endpoint. */ + /* + * call the complete request with the locks off, just in case the + * request tries to queue more work for this endpoint. + */ if (hs_req->req.complete) { spin_unlock(&hs_ep->lock); @@ -1333,9 +1388,11 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, spin_lock(&hs_ep->lock); } - /* Look to see if there is anything else to do. Note, the completion + /* + * Look to see if there is anything else to do. Note, the completion * of the previous request may have caused a new request to be started - * so be careful when doing this. */ + * so be careful when doing this. + */ if (!hs_ep->req && result >= 0) { restart = !list_empty(&hs_ep->queue); @@ -1355,7 +1412,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, * * See s3c_hsotg_complete_request(), but called with the endpoint's * lock held. -*/ + */ static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, @@ -1382,13 +1439,13 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx]; struct s3c_hsotg_req *hs_req = hs_ep->req; - void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx); + void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx); int to_read; int max_req; int read_ptr; if (!hs_req) { - u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx)); + u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx)); int ptr; dev_warn(hsotg->dev, @@ -1412,7 +1469,8 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) __func__, to_read, max_req, read_ptr, hs_req->req.length); if (to_read > max_req) { - /* more data appeared than we where willing + /* + * more data appeared than we where willing * to deal with in this request. */ @@ -1424,8 +1482,10 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) hs_req->req.actual += to_read; to_read = DIV_ROUND_UP(to_read, 4); - /* note, we might over-write the buffer end by 3 bytes depending on - * alignment of the data. */ + /* + * note, we might over-write the buffer end by 3 bytes depending on + * alignment of the data. + */ readsl(fifo, hs_req->req.buf + read_ptr, to_read); spin_unlock(&hs_ep->lock); @@ -1465,14 +1525,14 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "sending zero-length packet\n"); /* issue a zero-sized packet to terminate this */ - writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | - S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0)); + writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | + DxEPTSIZ_XferSize(0), hsotg->regs + DIEPTSIZ(0)); - ctrl = readl(hsotg->regs + S3C_DIEPCTL0); - ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ - ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= S3C_DxEPCTL_USBActEp; - writel(ctrl, hsotg->regs + S3C_DIEPCTL0); + ctrl = readl(hsotg->regs + DIEPCTL0); + ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ + ctrl |= DxEPCTL_USBActEp; + writel(ctrl, hsotg->regs + DIEPCTL0); } /** @@ -1484,15 +1544,15 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, * The RXFIFO has delivered an OutDone event, which means that the data * transfer for an OUT endpoint has been completed, either by a short * packet or by the finish of a transfer. -*/ + */ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, int epnum, bool was_setup) { - u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); + u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum)); struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; struct s3c_hsotg_req *hs_req = hs_ep->req; struct usb_request *req = &hs_req->req; - unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + unsigned size_left = DxEPTSIZ_XferSize_GET(epsize); int result = 0; if (!hs_req) { @@ -1503,7 +1563,8 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, if (using_dma(hsotg)) { unsigned size_done; - /* Calculate the size of the transfer by checking how much + /* + * Calculate the size of the transfer by checking how much * is left in the endpoint size register and then working it * out from the amount we loaded for the transfer. * @@ -1521,17 +1582,29 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, if (req->actual < req->length && size_left == 0) { s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); return; + } else if (epnum == 0) { + /* + * After was_setup = 1 => + * set CNAK for non Setup requests + */ + hsotg->setup = was_setup ? 0 : 1; } if (req->actual < req->length && req->short_not_ok) { dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", __func__, req->actual, req->length); - /* todo - what should we return here? there's no one else - * even bothering to check the status. */ + /* + * todo - what should we return here? there's no one else + * even bothering to check the status. + */ } if (epnum == 0) { + /* + * Condition req->complete != s3c_hsotg_complete_setup says: + * send ZLP when we have an asynchronous request from gadget + */ if (!was_setup && req->complete != s3c_hsotg_complete_setup) s3c_hsotg_send_zlp(hsotg, hs_req); } @@ -1544,14 +1617,14 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, * @hsotg: The device instance * * Return the current frame number -*/ + */ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) { u32 dsts; - dsts = readl(hsotg->regs + S3C_DSTS); - dsts &= S3C_DSTS_SOFFN_MASK; - dsts >>= S3C_DSTS_SOFFN_SHIFT; + dsts = readl(hsotg->regs + DSTS); + dsts &= DSTS_SOFFN_MASK; + dsts >>= DSTS_SOFFN_SHIFT; return dsts; } @@ -1574,29 +1647,29 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) */ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) { - u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP); + u32 grxstsr = readl(hsotg->regs + GRXSTSP); u32 epnum, status, size; WARN_ON(using_dma(hsotg)); - epnum = grxstsr & S3C_GRXSTS_EPNum_MASK; - status = grxstsr & S3C_GRXSTS_PktSts_MASK; + epnum = grxstsr & GRXSTS_EPNum_MASK; + status = grxstsr & GRXSTS_PktSts_MASK; - size = grxstsr & S3C_GRXSTS_ByteCnt_MASK; - size >>= S3C_GRXSTS_ByteCnt_SHIFT; + size = grxstsr & GRXSTS_ByteCnt_MASK; + size >>= GRXSTS_ByteCnt_SHIFT; if (1) dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n", __func__, grxstsr, size, epnum); -#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT) +#define __status(x) ((x) >> GRXSTS_PktSts_SHIFT) - switch (status >> S3C_GRXSTS_PktSts_SHIFT) { - case __status(S3C_GRXSTS_PktSts_GlobalOutNAK): + switch (status >> GRXSTS_PktSts_SHIFT) { + case __status(GRXSTS_PktSts_GlobalOutNAK): dev_dbg(hsotg->dev, "GlobalOutNAK\n"); break; - case __status(S3C_GRXSTS_PktSts_OutDone): + case __status(GRXSTS_PktSts_OutDone): dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n", s3c_hsotg_read_frameno(hsotg)); @@ -1604,24 +1677,24 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) s3c_hsotg_handle_outdone(hsotg, epnum, false); break; - case __status(S3C_GRXSTS_PktSts_SetupDone): + case __status(GRXSTS_PktSts_SetupDone): dev_dbg(hsotg->dev, "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + S3C_DOEPCTL(0))); + readl(hsotg->regs + DOEPCTL(0))); s3c_hsotg_handle_outdone(hsotg, epnum, true); break; - case __status(S3C_GRXSTS_PktSts_OutRX): + case __status(GRXSTS_PktSts_OutRX): s3c_hsotg_rx_data(hsotg, epnum, size); break; - case __status(S3C_GRXSTS_PktSts_SetupRX): + case __status(GRXSTS_PktSts_SetupRX): dev_dbg(hsotg->dev, "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + S3C_DOEPCTL(0))); + readl(hsotg->regs + DOEPCTL(0))); s3c_hsotg_rx_data(hsotg, epnum, size); break; @@ -1638,18 +1711,18 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) /** * s3c_hsotg_ep0_mps - turn max packet size into register setting * @mps: The maximum packet size in bytes. -*/ + */ static u32 s3c_hsotg_ep0_mps(unsigned int mps) { switch (mps) { case 64: - return S3C_D0EPCTL_MPS_64; + return D0EPCTL_MPS_64; case 32: - return S3C_D0EPCTL_MPS_32; + return D0EPCTL_MPS_32; case 16: - return S3C_D0EPCTL_MPS_16; + return D0EPCTL_MPS_16; case 8: - return S3C_D0EPCTL_MPS_8; + return D0EPCTL_MPS_8; } /* bad max packet size, warn and return invalid result */ @@ -1680,7 +1753,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, if (mpsval > 3) goto bad_mps; } else { - if (mps >= S3C_DxEPCTL_MPS_LIMIT+1) + if (mps >= DxEPCTL_MPS_LIMIT+1) goto bad_mps; mpsval = mps; @@ -1688,19 +1761,21 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, hs_ep->ep.maxpacket = mps; - /* update both the in and out endpoint controldir_ registers, even - * if one of the directions may not be in use. */ + /* + * update both the in and out endpoint controldir_ registers, even + * if one of the directions may not be in use. + */ - reg = readl(regs + S3C_DIEPCTL(ep)); - reg &= ~S3C_DxEPCTL_MPS_MASK; + reg = readl(regs + DIEPCTL(ep)); + reg &= ~DxEPCTL_MPS_MASK; reg |= mpsval; - writel(reg, regs + S3C_DIEPCTL(ep)); + writel(reg, regs + DIEPCTL(ep)); if (ep) { - reg = readl(regs + S3C_DOEPCTL(ep)); - reg &= ~S3C_DxEPCTL_MPS_MASK; + reg = readl(regs + DOEPCTL(ep)); + reg &= ~DxEPCTL_MPS_MASK; reg |= mpsval; - writel(reg, regs + S3C_DOEPCTL(ep)); + writel(reg, regs + DOEPCTL(ep)); } return; @@ -1719,16 +1794,16 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) int timeout; int val; - writel(S3C_GRSTCTL_TxFNum(idx) | S3C_GRSTCTL_TxFFlsh, - hsotg->regs + S3C_GRSTCTL); + writel(GRSTCTL_TxFNum(idx) | GRSTCTL_TxFFlsh, + hsotg->regs + GRSTCTL); /* wait until the fifo is flushed */ timeout = 100; while (1) { - val = readl(hsotg->regs + S3C_GRSTCTL); + val = readl(hsotg->regs + GRSTCTL); - if ((val & (S3C_GRSTCTL_TxFFlsh)) == 0) + if ((val & (GRSTCTL_TxFFlsh)) == 0) break; if (--timeout == 0) { @@ -1778,7 +1853,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep) { struct s3c_hsotg_req *hs_req = hs_ep->req; - u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); int size_left, size_done; if (!hs_req) { @@ -1786,7 +1861,15 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, return; } - /* Calculate the size of the transfer by checking how much is left + /* Finish ZLP handling for IN EP0 transactions */ + if (hsotg->eps[0].sent_zlp) { + dev_dbg(hsotg->dev, "zlp packet received\n"); + s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0); + return; + } + + /* + * Calculate the size of the transfer by checking how much is left * in the endpoint size register and then working it out from * the amount we loaded for the transfer. * @@ -1795,7 +1878,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * aligned). */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + size_left = DxEPTSIZ_XferSize_GET(epsize); size_done = hs_ep->size_loaded - size_left; size_done += hs_ep->last_load; @@ -1805,9 +1888,28 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, __func__, hs_req->req.actual, size_done); hs_req->req.actual = size_done; + dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n", + hs_req->req.length, hs_req->req.actual, hs_req->req.zero); + + /* + * Check if dealing with Maximum Packet Size(MPS) IN transfer at EP0 + * When sent data is a multiple MPS size (e.g. 64B ,128B ,192B + * ,256B ... ), after last MPS sized packet send IN ZLP packet to + * inform the host that no more data is available. + * The state of req.zero member is checked to be sure that the value to + * send is smaller than wValue expected from host. + * Check req.length to NOT send another ZLP when the current one is + * under completion (the one for which this completion has been called). + */ + if (hs_req->req.length && hs_ep->index == 0 && hs_req->req.zero && + hs_req->req.length == hs_req->req.actual && + !(hs_req->req.length % hs_ep->ep.maxpacket)) { - /* if we did all of the transfer, and there is more data left - * around, then try restarting the rest of the request */ + dev_dbg(hsotg->dev, "ep0 zlp IN packet sent\n"); + s3c_hsotg_send_zlp(hsotg, hs_req); + + return; + } if (!size_left && hs_req->req.actual < hs_req->req.length) { dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__); @@ -1823,14 +1925,14 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * @dir_in: Set if this is an IN endpoint * * Process and clear any interrupt pending for an individual endpoint -*/ + */ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, int dir_in) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx]; - u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx); - u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx); - u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx); + u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); u32 ints; ints = readl(hsotg->regs + epint_reg); @@ -1841,28 +1943,32 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n", __func__, idx, dir_in ? "in" : "out", ints); - if (ints & S3C_DxEPINT_XferCompl) { + if (ints & DxEPINT_XferCompl) { dev_dbg(hsotg->dev, "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n", __func__, readl(hsotg->regs + epctl_reg), readl(hsotg->regs + epsiz_reg)); - /* we get OutDone from the FIFO, so we only need to look - * at completing IN requests here */ + /* + * we get OutDone from the FIFO, so we only need to look + * at completing IN requests here + */ if (dir_in) { s3c_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) s3c_hsotg_enqueue_setup(hsotg); } else if (using_dma(hsotg)) { - /* We're using DMA, we need to fire an OutDone here - * as we ignore the RXFIFO. */ + /* + * We're using DMA, we need to fire an OutDone here + * as we ignore the RXFIFO. + */ s3c_hsotg_handle_outdone(hsotg, idx, false); } } - if (ints & S3C_DxEPINT_EPDisbld) { + if (ints & DxEPINT_EPDisbld) { dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); if (dir_in) { @@ -1870,27 +1976,29 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, s3c_hsotg_txfifo_flush(hsotg, idx); - if ((epctl & S3C_DxEPCTL_Stall) && - (epctl & S3C_DxEPCTL_EPType_Bulk)) { - int dctl = readl(hsotg->regs + S3C_DCTL); + if ((epctl & DxEPCTL_Stall) && + (epctl & DxEPCTL_EPType_Bulk)) { + int dctl = readl(hsotg->regs + DCTL); - dctl |= S3C_DCTL_CGNPInNAK; - writel(dctl, hsotg->regs + S3C_DCTL); + dctl |= DCTL_CGNPInNAK; + writel(dctl, hsotg->regs + DCTL); } } } - if (ints & S3C_DxEPINT_AHBErr) + if (ints & DxEPINT_AHBErr) dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__); - if (ints & S3C_DxEPINT_Setup) { /* Setup or Timeout */ + if (ints & DxEPINT_Setup) { /* Setup or Timeout */ dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); if (using_dma(hsotg) && idx == 0) { - /* this is the notification we've received a + /* + * this is the notification we've received a * setup packet. In non-DMA mode we'd get this * from the RXFIFO, instead we need to process - * the setup here. */ + * the setup here. + */ if (dir_in) WARN_ON_ONCE(1); @@ -1899,26 +2007,25 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, } } - if (ints & S3C_DxEPINT_Back2BackSetup) + if (ints & DxEPINT_Back2BackSetup) dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); if (dir_in) { - /* not sure if this is important, but we'll clear it anyway - */ - if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) { + /* not sure if this is important, but we'll clear it anyway */ + if (ints & DIEPMSK_INTknTXFEmpMsk) { dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", __func__, idx); } /* this probably means something bad is happening */ - if (ints & S3C_DIEPMSK_INTknEPMisMsk) { + if (ints & DIEPMSK_INTknEPMisMsk) { dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n", __func__, idx); } /* FIFO has space or is empty (see GAHBCFG) */ if (hsotg->dedicated_fifos && - ints & S3C_DIEPMSK_TxFIFOEmpty) { + ints & DIEPMSK_TxFIFOEmpty) { dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", __func__, idx); if (!using_dma(hsotg)) @@ -1933,40 +2040,45 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, * * Handle updating the device settings after the enumeration phase has * been completed. -*/ + */ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) { - u32 dsts = readl(hsotg->regs + S3C_DSTS); + u32 dsts = readl(hsotg->regs + DSTS); int ep0_mps = 0, ep_mps; - /* This should signal the finish of the enumeration phase + /* + * This should signal the finish of the enumeration phase * of the USB handshaking, so we should now know what rate - * we connected at. */ + * we connected at. + */ dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts); - /* note, since we're limited by the size of transfer on EP0, and + /* + * note, since we're limited by the size of transfer on EP0, and * it seems IN transfers must be a even number of packets we do - * not advertise a 64byte MPS on EP0. */ + * not advertise a 64byte MPS on EP0. + */ /* catch both EnumSpd_FS and EnumSpd_FS48 */ - switch (dsts & S3C_DSTS_EnumSpd_MASK) { - case S3C_DSTS_EnumSpd_FS: - case S3C_DSTS_EnumSpd_FS48: + switch (dsts & DSTS_EnumSpd_MASK) { + case DSTS_EnumSpd_FS: + case DSTS_EnumSpd_FS48: hsotg->gadget.speed = USB_SPEED_FULL; ep0_mps = EP0_MPS_LIMIT; ep_mps = 64; break; - case S3C_DSTS_EnumSpd_HS: + case DSTS_EnumSpd_HS: hsotg->gadget.speed = USB_SPEED_HIGH; ep0_mps = EP0_MPS_LIMIT; ep_mps = 512; break; - case S3C_DSTS_EnumSpd_LS: + case DSTS_EnumSpd_LS: hsotg->gadget.speed = USB_SPEED_LOW; - /* note, we don't actually support LS in this driver at the + /* + * note, we don't actually support LS in this driver at the * moment, and the documentation seems to imply that it isn't * supported by the PHYs on some of the devices. */ @@ -1975,13 +2087,15 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) dev_info(hsotg->dev, "new device is %s\n", usb_speed_string(hsotg->gadget.speed)); - /* we should now know the maximum packet size for an - * endpoint, so set the endpoints to a default value. */ + /* + * we should now know the maximum packet size for an + * endpoint, so set the endpoints to a default value. + */ if (ep0_mps) { int i; s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps); - for (i = 1; i < S3C_HSOTG_EPS; i++) + for (i = 1; i < hsotg->num_of_eps; i++) s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps); } @@ -1990,8 +2104,8 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) s3c_hsotg_enqueue_setup(hsotg); dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); } /** @@ -2014,8 +2128,10 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, spin_lock_irqsave(&ep->lock, flags); list_for_each_entry_safe(req, treq, &ep->queue, queue) { - /* currently, we can't do much about an already - * running request on an in endpoint */ + /* + * currently, we can't do much about an already + * running request on an in endpoint + */ if (ep->req == req && ep->dir_in && !force) continue; @@ -2033,18 +2149,18 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, (_hs)->driver->_entry(&(_hs)->gadget); /** - * s3c_hsotg_disconnect_irq - disconnect irq service + * s3c_hsotg_disconnect - disconnect service * @hsotg: The device state. * - * A disconnect IRQ has been received, meaning that the host has - * lost contact with the bus. Remove all current transactions - * and signal the gadget driver that this has happened. -*/ -static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg) + * The device has been disconnected. Remove all current + * transactions and signal the gadget driver that this + * has happened. + */ +static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg) { unsigned ep; - for (ep = 0; ep < S3C_HSOTG_EPS; ep++) + for (ep = 0; ep < hsotg->num_of_eps; ep++) kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true); call_gadget(hsotg, disconnect); @@ -2062,7 +2178,7 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) /* look through for any more data to transmit */ - for (epno = 0; epno < S3C_HSOTG_EPS; epno++) { + for (epno = 0; epno < hsotg->num_of_eps; epno++) { ep = &hsotg->eps[epno]; if (!ep->dir_in) @@ -2078,12 +2194,187 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) } } -static struct s3c_hsotg *our_hsotg; - /* IRQ flags which will trigger a retry around the IRQ loop */ -#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \ - S3C_GINTSTS_PTxFEmp | \ - S3C_GINTSTS_RxFLvl) +#define IRQ_RETRY_MASK (GINTSTS_NPTxFEmp | \ + GINTSTS_PTxFEmp | \ + GINTSTS_RxFLvl) + +/** + * s3c_hsotg_corereset - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. + */ +static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) +{ + int timeout; + u32 grstctl; + + dev_dbg(hsotg->dev, "resetting core\n"); + + /* issue soft reset */ + writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL); + + timeout = 1000; + do { + grstctl = readl(hsotg->regs + GRSTCTL); + } while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0); + + if (grstctl & GRSTCTL_CSftRst) { + dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); + return -EINVAL; + } + + timeout = 1000; + + while (1) { + u32 grstctl = readl(hsotg->regs + GRSTCTL); + + if (timeout-- < 0) { + dev_info(hsotg->dev, + "%s: reset failed, GRSTCTL=%08x\n", + __func__, grstctl); + return -ETIMEDOUT; + } + + if (!(grstctl & GRSTCTL_AHBIdle)) + continue; + + break; /* reset done */ + } + + dev_dbg(hsotg->dev, "reset successful\n"); + return 0; +} + +/** + * s3c_hsotg_core_init - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. + */ +static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) +{ + s3c_hsotg_corereset(hsotg); + + /* + * we must now enable ep0 ready for host detection and then + * set configuration. + */ + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | + (0x5 << 10), hsotg->regs + GUSBCFG); + + s3c_hsotg_init_fifo(hsotg); + + __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); + + writel(1 << 18 | DCFG_DevSpd_HS, hsotg->regs + DCFG); + + /* Clear any pending OTG interrupts */ + writel(0xffffffff, hsotg->regs + GOTGINT); + + /* Clear any pending interrupts */ + writel(0xffffffff, hsotg->regs + GINTSTS); + + writel(GINTSTS_ErlySusp | GINTSTS_SessReqInt | + GINTSTS_GOUTNakEff | GINTSTS_GINNakEff | + GINTSTS_ConIDStsChng | GINTSTS_USBRst | + GINTSTS_EnumDone | GINTSTS_OTGInt | + GINTSTS_USBSusp | GINTSTS_WkUpInt, + hsotg->regs + GINTMSK); + + if (using_dma(hsotg)) + writel(GAHBCFG_GlblIntrEn | GAHBCFG_DMAEn | + GAHBCFG_HBstLen_Incr4, + hsotg->regs + GAHBCFG); + else + writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG); + + /* + * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end + * up being flooded with interrupts if the host is polling the + * endpoint to try and read data. + */ + + writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) | + DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk | + DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | + DIEPMSK_INTknEPMisMsk, + hsotg->regs + DIEPMSK); + + /* + * don't need XferCompl, we get that from RXFIFO in slave mode. In + * DMA mode we may need this. + */ + writel((using_dma(hsotg) ? (DIEPMSK_XferComplMsk | + DIEPMSK_TimeOUTMsk) : 0) | + DOEPMSK_EPDisbldMsk | DOEPMSK_AHBErrMsk | + DOEPMSK_SetupMsk, + hsotg->regs + DOEPMSK); + + writel(0, hsotg->regs + DAINTMSK); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); + + /* enable in and out endpoint interrupts */ + s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPInt | GINTSTS_IEPInt); + + /* + * Enable the RXFIFO when in slave mode, as this is how we collect + * the data. In DMA mode, we get events from the FIFO but also + * things we cannot process, so do not use it. + */ + if (!using_dma(hsotg)) + s3c_hsotg_en_gsint(hsotg, GINTSTS_RxFLvl); + + /* Enable interrupts for EP0 in and out */ + s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); + s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); + + __orr32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); + udelay(10); /* see openiboot */ + __bic32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); + + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL)); + + /* + * DxEPCTL_USBActEp says RO in manual, but seems to be set by + * writing to the EPCTL register.. + */ + + /* set to read 1 8byte packet */ + writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | + DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); + + writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | + DxEPCTL_CNAK | DxEPCTL_EPEna | + DxEPCTL_USBActEp, + hsotg->regs + DOEPCTL0); + + /* enable, but don't activate EP0in */ + writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | + DxEPCTL_USBActEp, hsotg->regs + DIEPCTL0); + + s3c_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); + + /* clear global NAKs */ + writel(DCTL_CGOUTNak | DCTL_CGNPInNAK, + hsotg->regs + DCTL); + + /* must be at-least 3ms to allow bus to see disconnect */ + mdelay(3); + + /* remove the soft-disconnect and let's go */ + __bic32(hsotg->regs + DCTL, DCTL_SftDiscon); +} /** * s3c_hsotg_irq - handle device interrupt @@ -2098,52 +2389,45 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw) u32 gintmsk; irq_retry: - gintsts = readl(hsotg->regs + S3C_GINTSTS); - gintmsk = readl(hsotg->regs + S3C_GINTMSK); + gintsts = readl(hsotg->regs + GINTSTS); + gintmsk = readl(hsotg->regs + GINTMSK); dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n", __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count); gintsts &= gintmsk; - if (gintsts & S3C_GINTSTS_OTGInt) { - u32 otgint = readl(hsotg->regs + S3C_GOTGINT); + if (gintsts & GINTSTS_OTGInt) { + u32 otgint = readl(hsotg->regs + GOTGINT); dev_info(hsotg->dev, "OTGInt: %08x\n", otgint); - writel(otgint, hsotg->regs + S3C_GOTGINT); - } - - if (gintsts & S3C_GINTSTS_DisconnInt) { - dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__); - writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS); - - s3c_hsotg_disconnect_irq(hsotg); + writel(otgint, hsotg->regs + GOTGINT); } - if (gintsts & S3C_GINTSTS_SessReqInt) { + if (gintsts & GINTSTS_SessReqInt) { dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__); - writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_SessReqInt, hsotg->regs + GINTSTS); } - if (gintsts & S3C_GINTSTS_EnumDone) { - writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_EnumDone) { + writel(GINTSTS_EnumDone, hsotg->regs + GINTSTS); s3c_hsotg_irq_enumdone(hsotg); } - if (gintsts & S3C_GINTSTS_ConIDStsChng) { + if (gintsts & GINTSTS_ConIDStsChng) { dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n", - readl(hsotg->regs + S3C_DSTS), - readl(hsotg->regs + S3C_GOTGCTL)); + readl(hsotg->regs + DSTS), + readl(hsotg->regs + GOTGCTL)); - writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_ConIDStsChng, hsotg->regs + GINTSTS); } - if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) { - u32 daint = readl(hsotg->regs + S3C_DAINT); - u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT; - u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT); + if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) { + u32 daint = readl(hsotg->regs + DAINT); + u32 daint_out = daint >> DAINT_OutEP_SHIFT; + u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT); int ep; dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); @@ -2159,102 +2443,116 @@ irq_retry: } } - if (gintsts & S3C_GINTSTS_USBRst) { + if (gintsts & GINTSTS_USBRst) { + + u32 usb_status = readl(hsotg->regs + GOTGCTL); + dev_info(hsotg->dev, "%s: USBRst\n", __func__); dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + S3C_GNPTXSTS)); + readl(hsotg->regs + GNPTXSTS)); - writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_USBRst, hsotg->regs + GINTSTS); - kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); + if (usb_status & GOTGCTL_BSESVLD) { + if (time_after(jiffies, hsotg->last_rst + + msecs_to_jiffies(200))) { - /* it seems after a reset we can end up with a situation - * where the TXFIFO still has data in it... the docs - * suggest resetting all the fifos, so use the init_fifo - * code to relayout and flush the fifos. - */ + kill_all_requests(hsotg, &hsotg->eps[0], + -ECONNRESET, true); - s3c_hsotg_init_fifo(hsotg); - - s3c_hsotg_enqueue_setup(hsotg); + s3c_hsotg_core_init(hsotg); + hsotg->last_rst = jiffies; + } + } } /* check both FIFOs */ - if (gintsts & S3C_GINTSTS_NPTxFEmp) { + if (gintsts & GINTSTS_NPTxFEmp) { dev_dbg(hsotg->dev, "NPTxFEmp\n"); - /* Disable the interrupt to stop it happening again + /* + * Disable the interrupt to stop it happening again * unless one of these endpoint routines decides that - * it needs re-enabling */ + * it needs re-enabling + */ - s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTxFEmp); s3c_hsotg_irq_fifoempty(hsotg, false); } - if (gintsts & S3C_GINTSTS_PTxFEmp) { + if (gintsts & GINTSTS_PTxFEmp) { dev_dbg(hsotg->dev, "PTxFEmp\n"); - /* See note in S3C_GINTSTS_NPTxFEmp */ + /* See note in GINTSTS_NPTxFEmp */ - s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTxFEmp); s3c_hsotg_irq_fifoempty(hsotg, true); } - if (gintsts & S3C_GINTSTS_RxFLvl) { - /* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, + if (gintsts & GINTSTS_RxFLvl) { + /* + * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, * we need to retry s3c_hsotg_handle_rx if this is still - * set. */ + * set. + */ s3c_hsotg_handle_rx(hsotg); } - if (gintsts & S3C_GINTSTS_ModeMis) { + if (gintsts & GINTSTS_ModeMis) { dev_warn(hsotg->dev, "warning, mode mismatch triggered\n"); - writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_ModeMis, hsotg->regs + GINTSTS); } - if (gintsts & S3C_GINTSTS_USBSusp) { - dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n"); - writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_USBSusp) { + dev_info(hsotg->dev, "GINTSTS_USBSusp\n"); + writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); call_gadget(hsotg, suspend); + s3c_hsotg_disconnect(hsotg); } - if (gintsts & S3C_GINTSTS_WkUpInt) { - dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n"); - writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_WkUpInt) { + dev_info(hsotg->dev, "GINTSTS_WkUpIn\n"); + writel(GINTSTS_WkUpInt, hsotg->regs + GINTSTS); call_gadget(hsotg, resume); } - if (gintsts & S3C_GINTSTS_ErlySusp) { - dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n"); - writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_ErlySusp) { + dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); + writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS); + + s3c_hsotg_disconnect(hsotg); } - /* these next two seem to crop-up occasionally causing the core + /* + * these next two seem to crop-up occasionally causing the core * to shutdown the USB transfer, so try clearing them and logging - * the occurrence. */ + * the occurrence. + */ - if (gintsts & S3C_GINTSTS_GOUTNakEff) { + if (gintsts & GINTSTS_GOUTNakEff) { dev_info(hsotg->dev, "GOUTNakEff triggered\n"); - writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL); + writel(DCTL_CGOUTNak, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } - if (gintsts & S3C_GINTSTS_GINNakEff) { + if (gintsts & GINTSTS_GINNakEff) { dev_info(hsotg->dev, "GINNakEff triggered\n"); - writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL); + writel(DCTL_CGNPInNAK, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } - /* if we've had fifo events, we should try and go around the - * loop again to see if there's any point in returning yet. */ + /* + * if we've had fifo events, we should try and go around the + * loop again to see if there's any point in returning yet. + */ if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) goto irq_retry; @@ -2268,7 +2566,7 @@ irq_retry: * @desc: The USB endpoint descriptor to configure with. * * This is called from the USB gadget code's usb_ep_enable(). -*/ + */ static int s3c_hsotg_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { @@ -2300,7 +2598,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); epctrl = readl(hsotg->regs + epctrl_reg); dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", @@ -2308,20 +2606,23 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, spin_lock_irqsave(&hs_ep->lock, flags); - epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK); - epctrl |= S3C_DxEPCTL_MPS(mps); + epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK); + epctrl |= DxEPCTL_MPS(mps); - /* mark the endpoint as active, otherwise the core may ignore - * transactions entirely for this endpoint */ - epctrl |= S3C_DxEPCTL_USBActEp; + /* + * mark the endpoint as active, otherwise the core may ignore + * transactions entirely for this endpoint + */ + epctrl |= DxEPCTL_USBActEp; - /* set the NAK status on the endpoint, otherwise we might try and + /* + * set the NAK status on the endpoint, otherwise we might try and * do something with data that we've yet got a request to process * since the RXFIFO will take data for an endpoint even if the * size register hasn't been set. */ - epctrl |= S3C_DxEPCTL_SNAK; + epctrl |= DxEPCTL_SNAK; /* update the endpoint state */ hs_ep->ep.maxpacket = mps; @@ -2336,37 +2637,40 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, goto out; case USB_ENDPOINT_XFER_BULK: - epctrl |= S3C_DxEPCTL_EPType_Bulk; + epctrl |= DxEPCTL_EPType_Bulk; break; case USB_ENDPOINT_XFER_INT: if (dir_in) { - /* Allocate our TxFNum by simply using the index + /* + * Allocate our TxFNum by simply using the index * of the endpoint for the moment. We could do * something better if the host indicates how - * many FIFOs we are expecting to use. */ + * many FIFOs we are expecting to use. + */ hs_ep->periodic = 1; - epctrl |= S3C_DxEPCTL_TxFNum(index); + epctrl |= DxEPCTL_TxFNum(index); } - epctrl |= S3C_DxEPCTL_EPType_Intterupt; + epctrl |= DxEPCTL_EPType_Intterupt; break; case USB_ENDPOINT_XFER_CONTROL: - epctrl |= S3C_DxEPCTL_EPType_Control; + epctrl |= DxEPCTL_EPType_Control; break; } - /* if the hardware has dedicated fifos, we must give each IN EP + /* + * if the hardware has dedicated fifos, we must give each IN EP * a unique tx-fifo even if it is non-periodic. */ if (dir_in && hsotg->dedicated_fifos) - epctrl |= S3C_DxEPCTL_TxFNum(index); + epctrl |= DxEPCTL_TxFNum(index); /* for non control endpoints, set PID to D0 */ if (index) - epctrl |= S3C_DxEPCTL_SetD0PID; + epctrl |= DxEPCTL_SetD0PID; dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", __func__, epctrl); @@ -2383,6 +2687,10 @@ out: return ret; } +/** + * s3c_hsotg_ep_disable - disable given endpoint + * @ep: The endpoint to disable. + */ static int s3c_hsotg_ep_disable(struct usb_ep *ep) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); @@ -2400,7 +2708,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) return -EINVAL; } - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); /* terminate all requests with shutdown */ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false); @@ -2408,9 +2716,9 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) spin_lock_irqsave(&hs_ep->lock, flags); ctrl = readl(hsotg->regs + epctrl_reg); - ctrl &= ~S3C_DxEPCTL_EPEna; - ctrl &= ~S3C_DxEPCTL_USBActEp; - ctrl |= S3C_DxEPCTL_SNAK; + ctrl &= ~DxEPCTL_EPEna; + ctrl &= ~DxEPCTL_USBActEp; + ctrl |= DxEPCTL_SNAK; dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); @@ -2426,7 +2734,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) * on_list - check request is on the given endpoint * @ep: The endpoint to check. * @test: The request to test if it is on the endpoint. -*/ + */ static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) { struct s3c_hsotg_req *req, *treq; @@ -2439,6 +2747,11 @@ static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) return false; } +/** + * s3c_hsotg_ep_dequeue - dequeue given endpoint + * @ep: The endpoint to dequeue. + * @req: The request to be removed from a queue. + */ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) { struct s3c_hsotg_req *hs_req = our_req(req); @@ -2461,6 +2774,11 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) return 0; } +/** + * s3c_hsotg_ep_sethalt - set halt on a given endpoint + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + */ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); @@ -2477,34 +2795,34 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) /* write both IN and OUT control registers */ - epreg = S3C_DIEPCTL(index); + epreg = DIEPCTL(index); epctl = readl(hs->regs + epreg); if (value) { - epctl |= S3C_DxEPCTL_Stall + S3C_DxEPCTL_SNAK; - if (epctl & S3C_DxEPCTL_EPEna) - epctl |= S3C_DxEPCTL_EPDis; + epctl |= DxEPCTL_Stall + DxEPCTL_SNAK; + if (epctl & DxEPCTL_EPEna) + epctl |= DxEPCTL_EPDis; } else { - epctl &= ~S3C_DxEPCTL_Stall; - xfertype = epctl & S3C_DxEPCTL_EPType_MASK; - if (xfertype == S3C_DxEPCTL_EPType_Bulk || - xfertype == S3C_DxEPCTL_EPType_Intterupt) - epctl |= S3C_DxEPCTL_SetD0PID; + epctl &= ~DxEPCTL_Stall; + xfertype = epctl & DxEPCTL_EPType_MASK; + if (xfertype == DxEPCTL_EPType_Bulk || + xfertype == DxEPCTL_EPType_Intterupt) + epctl |= DxEPCTL_SetD0PID; } writel(epctl, hs->regs + epreg); - epreg = S3C_DOEPCTL(index); + epreg = DOEPCTL(index); epctl = readl(hs->regs + epreg); if (value) - epctl |= S3C_DxEPCTL_Stall; + epctl |= DxEPCTL_Stall; else { - epctl &= ~S3C_DxEPCTL_Stall; - xfertype = epctl & S3C_DxEPCTL_EPType_MASK; - if (xfertype == S3C_DxEPCTL_EPType_Bulk || - xfertype == S3C_DxEPCTL_EPType_Intterupt) - epctl |= S3C_DxEPCTL_SetD0PID; + epctl &= ~DxEPCTL_Stall; + xfertype = epctl & DxEPCTL_EPType_MASK; + if (xfertype == DxEPCTL_EPType_Bulk || + xfertype == DxEPCTL_EPType_Intterupt) + epctl |= DxEPCTL_SetD0PID; } writel(epctl, hs->regs + epreg); @@ -2526,57 +2844,91 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = { }; /** - * s3c_hsotg_corereset - issue softreset to the core - * @hsotg: The device state + * s3c_hsotg_phy_enable - enable platform phy dev + * @hsotg: The driver state * - * Issue a soft reset to the core, and await the core finishing it. -*/ -static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) { - int timeout; - u32 grstctl; + struct platform_device *pdev = to_platform_device(hsotg->dev); - dev_dbg(hsotg->dev, "resetting core\n"); + dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev); + if (hsotg->plat->phy_init) + hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); +} - /* issue soft reset */ - writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL); +/** + * s3c_hsotg_phy_disable - disable platform phy dev + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); - timeout = 1000; - do { - grstctl = readl(hsotg->regs + S3C_GRSTCTL); - } while ((grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0); + if (hsotg->plat->phy_exit) + hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); +} - if (grstctl & S3C_GRSTCTL_CSftRst) { - dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); - return -EINVAL; - } +/** + * s3c_hsotg_init - initalize the usb core + * @hsotg: The driver state + */ +static void s3c_hsotg_init(struct s3c_hsotg *hsotg) +{ + /* unmask subset of endpoint interrupts */ - timeout = 1000; + writel(DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | + DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk, + hsotg->regs + DIEPMSK); - while (1) { - u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL); + writel(DOEPMSK_SetupMsk | DOEPMSK_AHBErrMsk | + DOEPMSK_EPDisbldMsk | DOEPMSK_XferComplMsk, + hsotg->regs + DOEPMSK); - if (timeout-- < 0) { - dev_info(hsotg->dev, - "%s: reset failed, GRSTCTL=%08x\n", - __func__, grstctl); - return -ETIMEDOUT; - } + writel(0, hsotg->regs + DAINTMSK); - if (!(grstctl & S3C_GRSTCTL_AHBIdle)) - continue; + /* Be in disconnected state until gadget is registered */ + __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); - break; /* reset done */ + if (0) { + /* post global nak until we're ready */ + writel(DCTL_SGNPInNAK | DCTL_SGOUTNak, + hsotg->regs + DCTL); } - dev_dbg(hsotg->dev, "reset successful\n"); - return 0; + /* setup fifos */ + + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(hsotg->regs + GRXFSIZ), + readl(hsotg->regs + GNPTXFSIZ)); + + s3c_hsotg_init_fifo(hsotg); + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | (0x5 << 10), + hsotg->regs + GUSBCFG); + + writel(using_dma(hsotg) ? GAHBCFG_DMAEn : 0x0, + hsotg->regs + GAHBCFG); } -static int s3c_hsotg_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +/** + * s3c_hsotg_udc_start - prepare the udc for work + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Perform initialization to prepare udc device and driver + * to work. + */ +static int s3c_hsotg_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct s3c_hsotg *hsotg = our_hsotg; + struct s3c_hsotg *hsotg = to_hsotg(gadget); int ret; if (!hsotg) { @@ -2592,7 +2944,7 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, if (driver->max_speed < USB_SPEED_FULL) dev_err(hsotg->dev, "%s: bad speed\n", __func__); - if (!bind || !driver->setup) { + if (!driver->setup) { dev_err(hsotg->dev, "%s: missing entry points\n", __func__); return -EINVAL; } @@ -2605,135 +2957,17 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask; hsotg->gadget.speed = USB_SPEED_UNKNOWN; - ret = device_add(&hsotg->gadget.dev); + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); if (ret) { - dev_err(hsotg->dev, "failed to register gadget device\n"); + dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); goto err; } - ret = bind(&hsotg->gadget); - if (ret) { - dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name); - - hsotg->gadget.dev.driver = NULL; - hsotg->driver = NULL; - goto err; - } - - /* we must now enable ep0 ready for host detection and then - * set configuration. */ - - s3c_hsotg_corereset(hsotg); - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | - (0x5 << 10), hsotg->regs + S3C_GUSBCFG); - - /* looks like soft-reset changes state of FIFOs */ - s3c_hsotg_init_fifo(hsotg); - - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG); - - /* Clear any pending OTG interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GOTGINT); - - /* Clear any pending interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GINTSTS); - - writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt | - S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst | - S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt | - S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt | - S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff | - S3C_GINTSTS_ErlySusp, - hsotg->regs + S3C_GINTMSK); - - if (using_dma(hsotg)) - writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn | - S3C_GAHBCFG_HBstLen_Incr4, - hsotg->regs + S3C_GAHBCFG); - else - writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG); - - /* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end - * up being flooded with interrupts if the host is polling the - * endpoint to try and read data. */ - - writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_INTknEPMisMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | - ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0), - hsotg->regs + S3C_DIEPMSK); - - /* don't need XferCompl, we get that from RXFIFO in slave mode. In - * DMA mode we may need this. */ - writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_EPDisbldMsk | - (using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk | - S3C_DIEPMSK_TimeOUTMsk) : 0), - hsotg->regs + S3C_DOEPMSK); - - writel(0, hsotg->regs + S3C_DAINTMSK); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); - - /* enable in and out endpoint interrupts */ - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); - - /* Enable the RXFIFO when in slave mode, as this is how we collect - * the data. In DMA mode, we get events from the FIFO but also - * things we cannot process, so do not use it. */ - if (!using_dma(hsotg)) - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl); - - /* Enable interrupts for EP0 in and out */ - s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); - s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); - - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - udelay(10); /* see openiboot */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - - dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); - - /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by - writing to the EPCTL register.. */ - - /* set to read 1 8byte packet */ - writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | - S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); - - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna | - S3C_DxEPCTL_USBActEp, - hsotg->regs + S3C_DOEPCTL0); - - /* enable, but don't activate EP0in */ - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0); - - s3c_hsotg_enqueue_setup(hsotg); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); - - /* clear global NAKs */ - writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, - hsotg->regs + S3C_DCTL); - - /* must be at-least 3ms to allow bus to see disconnect */ - msleep(3); - - /* remove the soft-disconnect and let's go */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - /* report to the user, and return */ + s3c_hsotg_phy_enable(hsotg); + s3c_hsotg_core_init(hsotg); + hsotg->last_rst = jiffies; dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); return 0; @@ -2743,9 +2977,17 @@ err: return ret; } -static int s3c_hsotg_stop(struct usb_gadget_driver *driver) +/** + * s3c_hsotg_udc_stop - stop the udc + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Stop udc hw block and stay tunned for future transmissions + */ +static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct s3c_hsotg *hsotg = our_hsotg; + struct s3c_hsotg *hsotg = to_hsotg(gadget); int ep; if (!hsotg) @@ -2755,16 +2997,15 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver) return -EINVAL; /* all endpoints should be shutdown */ - for (ep = 0; ep < S3C_HSOTG_EPS; ep++) + for (ep = 0; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); - call_gadget(hsotg, disconnect); + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - driver->unbind(&hsotg->gadget); hsotg->driver = NULL; hsotg->gadget.speed = USB_SPEED_UNKNOWN; - - device_del(&hsotg->gadget.dev); + hsotg->gadget.dev.driver = NULL; dev_info(hsotg->dev, "unregistered gadget driver '%s'\n", driver->driver.name); @@ -2772,6 +3013,12 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver) return 0; } +/** + * s3c_hsotg_gadget_getframe - read the frame number + * @gadget: The usb gadget state + * + * Read the {micro} frame number + */ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) { return s3c_hsotg_read_frameno(to_hsotg(gadget)); @@ -2779,8 +3026,8 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) static struct usb_gadget_ops s3c_hsotg_gadget_ops = { .get_frame = s3c_hsotg_gadget_getframe, - .start = s3c_hsotg_start, - .stop = s3c_hsotg_stop, + .udc_start = s3c_hsotg_udc_start, + .udc_stop = s3c_hsotg_udc_stop, }; /** @@ -2827,111 +3074,42 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT; hs_ep->ep.ops = &s3c_hsotg_ep_ops; - /* Read the FIFO size for the Periodic TX FIFO, even if we're + /* + * Read the FIFO size for the Periodic TX FIFO, even if we're * an OUT endpoint, we may as well do this if in future the * code is changed to make each endpoint's direction changeable. */ - ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum)); - hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; + ptxfifo = readl(hsotg->regs + DPTXFSIZn(epnum)); + hs_ep->fifo_size = DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; - /* if we're using dma, we need to set the next-endpoint pointer + /* + * if we're using dma, we need to set the next-endpoint pointer * to be something valid. */ if (using_dma(hsotg)) { - u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15); - writel(next, hsotg->regs + S3C_DIEPCTL(epnum)); - writel(next, hsotg->regs + S3C_DOEPCTL(epnum)); + u32 next = DxEPCTL_NextEp((epnum + 1) % 15); + writel(next, hsotg->regs + DIEPCTL(epnum)); + writel(next, hsotg->regs + DOEPCTL(epnum)); } } /** - * s3c_hsotg_otgreset - reset the OtG phy block - * @hsotg: The host state. + * s3c_hsotg_hw_cfg - read HW configuration registers + * @param: The device state * - * Power up the phy, set the basic configuration and start the PHY. + * Read the USB core HW configuration registers */ -static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) -{ - struct clk *xusbxti; - u32 pwr, osc; - - pwr = readl(S3C_PHYPWR); - pwr &= ~0x19; - writel(pwr, S3C_PHYPWR); - mdelay(1); - - osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0; - - xusbxti = clk_get(hsotg->dev, "xusbxti"); - if (xusbxti && !IS_ERR(xusbxti)) { - switch (clk_get_rate(xusbxti)) { - case 12*MHZ: - osc |= S3C_PHYCLK_CLKSEL_12M; - break; - case 24*MHZ: - osc |= S3C_PHYCLK_CLKSEL_24M; - break; - default: - case 48*MHZ: - /* default reference clock */ - break; - } - clk_put(xusbxti); - } - - writel(osc | 0x10, S3C_PHYCLK); - - /* issue a full set of resets to the otg and core */ - - writel(S3C_RSTCON_PHY, S3C_RSTCON); - udelay(20); /* at-least 10uS */ - writel(0, S3C_RSTCON); -} - - -static void s3c_hsotg_init(struct s3c_hsotg *hsotg) +static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg) { - u32 cfg4; - - /* unmask subset of endpoint interrupts */ - - writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, - hsotg->regs + S3C_DIEPMSK); - - writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk, - hsotg->regs + S3C_DOEPMSK); - - writel(0, hsotg->regs + S3C_DAINTMSK); - - /* Be in disconnected state until gadget is registered */ - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - if (0) { - /* post global nak until we're ready */ - writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak, - hsotg->regs + S3C_DCTL); - } - - /* setup fifos */ - - dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + S3C_GRXFSIZ), - readl(hsotg->regs + S3C_GNPTXFSIZ)); - - s3c_hsotg_init_fifo(hsotg); - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10), - hsotg->regs + S3C_GUSBCFG); + u32 cfg2, cfg4; + /* check hardware configuration */ - writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, - hsotg->regs + S3C_GAHBCFG); + cfg2 = readl(hsotg->regs + 0x48); + hsotg->num_of_eps = (cfg2 >> 10) & 0xF; - /* check hardware configuration */ + dev_info(hsotg->dev, "EPs:%d\n", hsotg->num_of_eps); cfg4 = readl(hsotg->regs + 0x50); hsotg->dedicated_fifos = (cfg4 >> 25) & 1; @@ -2940,6 +3118,10 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) hsotg->dedicated_fifos ? "dedicated" : "shared"); } +/** + * s3c_hsotg_dump - dump state of the udc + * @param: The device state + */ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) { #ifdef DEBUG @@ -2949,46 +3131,45 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) int idx; dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n", - readl(regs + S3C_DCFG), readl(regs + S3C_DCTL), - readl(regs + S3C_DIEPMSK)); + readl(regs + DCFG), readl(regs + DCTL), + readl(regs + DIEPMSK)); dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n", - readl(regs + S3C_GAHBCFG), readl(regs + 0x44)); + readl(regs + GAHBCFG), readl(regs + 0x44)); dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ)); + readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ)); /* show periodic fifo settings */ for (idx = 1; idx <= 15; idx++) { - val = readl(regs + S3C_DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZn(idx)); dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, - val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT, - val & S3C_DPTXFSIZn_DPTxFStAddr_MASK); + val >> DPTXFSIZn_DPTxFSize_SHIFT, + val & DPTXFSIZn_DPTxFStAddr_MASK); } for (idx = 0; idx < 15; idx++) { dev_info(dev, "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx, - readl(regs + S3C_DIEPCTL(idx)), - readl(regs + S3C_DIEPTSIZ(idx)), - readl(regs + S3C_DIEPDMA(idx))); + readl(regs + DIEPCTL(idx)), + readl(regs + DIEPTSIZ(idx)), + readl(regs + DIEPDMA(idx))); - val = readl(regs + S3C_DOEPCTL(idx)); + val = readl(regs + DOEPCTL(idx)); dev_info(dev, "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", - idx, readl(regs + S3C_DOEPCTL(idx)), - readl(regs + S3C_DOEPTSIZ(idx)), - readl(regs + S3C_DOEPDMA(idx))); + idx, readl(regs + DOEPCTL(idx)), + readl(regs + DOEPTSIZ(idx)), + readl(regs + DOEPDMA(idx))); } dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", - readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE)); + readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE)); #endif } - /** * state_show - debugfs: show overall driver and device state. * @seq: The seq file to write to. @@ -3005,38 +3186,38 @@ static int state_show(struct seq_file *seq, void *v) int idx; seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", - readl(regs + S3C_DCFG), - readl(regs + S3C_DCTL), - readl(regs + S3C_DSTS)); + readl(regs + DCFG), + readl(regs + DCTL), + readl(regs + DSTS)); seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", - readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK)); + readl(regs + DIEPMSK), readl(regs + DOEPMSK)); seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", - readl(regs + S3C_GINTMSK), - readl(regs + S3C_GINTSTS)); + readl(regs + GINTMSK), + readl(regs + GINTSTS)); seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", - readl(regs + S3C_DAINTMSK), - readl(regs + S3C_DAINT)); + readl(regs + DAINTMSK), + readl(regs + DAINT)); seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", - readl(regs + S3C_GNPTXSTS), - readl(regs + S3C_GRXSTSR)); + readl(regs + GNPTXSTS), + readl(regs + GRXSTSR)); seq_printf(seq, "\nEndpoint status:\n"); for (idx = 0; idx < 15; idx++) { u32 in, out; - in = readl(regs + S3C_DIEPCTL(idx)); - out = readl(regs + S3C_DOEPCTL(idx)); + in = readl(regs + DIEPCTL(idx)); + out = readl(regs + DOEPCTL(idx)); seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", idx, in, out); - in = readl(regs + S3C_DIEPTSIZ(idx)); - out = readl(regs + S3C_DOEPTSIZ(idx)); + in = readl(regs + DIEPTSIZ(idx)); + out = readl(regs + DOEPTSIZ(idx)); seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", in, out); @@ -3067,7 +3248,7 @@ static const struct file_operations state_fops = { * * Show the FIFO information for the overall fifo and all the * periodic transmission FIFOs. -*/ + */ static int fifo_show(struct seq_file *seq, void *v) { struct s3c_hsotg *hsotg = seq->private; @@ -3076,21 +3257,21 @@ static int fifo_show(struct seq_file *seq, void *v) int idx; seq_printf(seq, "Non-periodic FIFOs:\n"); - seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ)); + seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); - val = readl(regs + S3C_GNPTXFSIZ); + val = readl(regs + GNPTXFSIZ); seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", - val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT, - val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK); + val >> GNPTXFSIZ_NPTxFDep_SHIFT, + val & GNPTXFSIZ_NPTxFStAddr_MASK); seq_printf(seq, "\nPeriodic TXFIFOs:\n"); for (idx = 1; idx <= 15; idx++) { - val = readl(regs + S3C_DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZn(idx)); seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, - val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT, - val & S3C_DPTXFSIZn_DPTxFStAddr_MASK); + val >> DPTXFSIZn_DPTxFSize_SHIFT, + val & DPTXFSIZn_DPTxFStAddr_MASK); } return 0; @@ -3122,7 +3303,7 @@ static const char *decode_direction(int is_in) * * This debugfs entry shows the state of the given endpoint (one is * registered for each available). -*/ + */ static int ep_show(struct seq_file *seq, void *v) { struct s3c_hsotg_ep *ep = seq->private; @@ -3139,20 +3320,20 @@ static int ep_show(struct seq_file *seq, void *v) /* first show the register state */ seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", - readl(regs + S3C_DIEPCTL(index)), - readl(regs + S3C_DOEPCTL(index))); + readl(regs + DIEPCTL(index)), + readl(regs + DOEPCTL(index))); seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", - readl(regs + S3C_DIEPDMA(index)), - readl(regs + S3C_DOEPDMA(index))); + readl(regs + DIEPDMA(index)), + readl(regs + DOEPDMA(index))); seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", - readl(regs + S3C_DIEPINT(index)), - readl(regs + S3C_DOEPINT(index))); + readl(regs + DIEPINT(index)), + readl(regs + DOEPINT(index))); seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", - readl(regs + S3C_DIEPTSIZ(index)), - readl(regs + S3C_DOEPTSIZ(index))); + readl(regs + DIEPTSIZ(index)), + readl(regs + DOEPTSIZ(index))); seq_printf(seq, "\n"); seq_printf(seq, "mps %d\n", ep->ep.maxpacket); @@ -3202,7 +3383,7 @@ static const struct file_operations ep_fops = { * about the state of the system. The directory name is created * with the same name as the device itself, in case we end up * with multiple blocks in future systems. -*/ + */ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) { struct dentry *root; @@ -3231,7 +3412,7 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) /* create one file for each endpoint */ - for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) { + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; ep->debugfs = debugfs_create_file(ep->name, 0444, @@ -3248,12 +3429,12 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) * @hsotg: The driver state * * Cleanup (remove) the debugfs files for use on module exit. -*/ + */ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) { unsigned epidx; - for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) { + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; debugfs_remove(ep->debugfs); } @@ -3264,48 +3445,39 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) } /** - * s3c_hsotg_gate - set the hardware gate for the block - * @pdev: The device we bound to - * @on: On or off. - * - * Set the hardware gate setting into the block. If we end up on - * something other than an S3C64XX, then we might need to change this - * to using a platform data callback, or some other mechanism. + * s3c_hsotg_release - release callback for hsotg device + * @dev: Device to for which release is called */ -static void s3c_hsotg_gate(struct platform_device *pdev, bool on) +static void s3c_hsotg_release(struct device *dev) { - unsigned long flags; - u32 others; - - local_irq_save(flags); - - others = __raw_readl(S3C64XX_OTHERS); - if (on) - others |= S3C64XX_OTHERS_USBMASK; - else - others &= ~S3C64XX_OTHERS_USBMASK; - __raw_writel(others, S3C64XX_OTHERS); + struct s3c_hsotg *hsotg = dev_get_drvdata(dev); - local_irq_restore(flags); + kfree(hsotg); } -static struct s3c_hsotg_plat s3c_hsotg_default_pdata; +/** + * s3c_hsotg_probe - probe function for hsotg driver + * @pdev: The platform information for the driver + */ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { struct s3c_hsotg_plat *plat = pdev->dev.platform_data; struct device *dev = &pdev->dev; + struct s3c_hsotg_ep *eps; struct s3c_hsotg *hsotg; struct resource *res; int epnum; int ret; + int i; - if (!plat) - plat = &s3c_hsotg_default_pdata; + plat = pdev->dev.platform_data; + if (!plat) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } - hsotg = kzalloc(sizeof(struct s3c_hsotg) + - sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS, - GFP_KERNEL); + hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL); if (!hsotg) { dev_err(dev, "cannot get memory\n"); return -ENOMEM; @@ -3371,6 +3543,54 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->gadget.dev.parent = dev; hsotg->gadget.dev.dma_mask = dev->dma_mask; + hsotg->gadget.dev.release = s3c_hsotg_release; + + /* reset the system */ + + clk_prepare_enable(hsotg->clk); + + /* regulators */ + + for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) + hsotg->supplies[i].supply = s3c_hsotg_supply_names[i]; + + ret = regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(dev, "failed to request supplies: %d\n", ret); + goto err_irq; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + + if (ret) { + dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); + goto err_supplies; + } + + /* usb phy enable */ + s3c_hsotg_phy_enable(hsotg); + + s3c_hsotg_corereset(hsotg); + s3c_hsotg_init(hsotg); + s3c_hsotg_hw_cfg(hsotg); + + /* hsotg->num_of_eps holds number of EPs other than ep0 */ + + if (hsotg->num_of_eps == 0) { + dev_err(dev, "wrong number of EPs (zero)\n"); + goto err_supplies; + } + + eps = kcalloc(hsotg->num_of_eps + 1, sizeof(struct s3c_hsotg_ep), + GFP_KERNEL); + if (!eps) { + dev_err(dev, "cannot get memory\n"); + goto err_supplies; + } + + hsotg->eps = eps; /* setup endpoint information */ @@ -3383,39 +3603,47 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!hsotg->ctrl_req) { dev_err(dev, "failed to allocate ctrl req\n"); - goto err_regs; + goto err_ep_mem; } - /* reset the system */ + /* initialise the endpoints now the core has been initialised */ + for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) + s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum); - clk_enable(hsotg->clk); + /* disable power and clock */ - s3c_hsotg_gate(pdev, true); + ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret); + goto err_ep_mem; + } - s3c_hsotg_otgreset(hsotg); - s3c_hsotg_corereset(hsotg); - s3c_hsotg_init(hsotg); + s3c_hsotg_phy_disable(hsotg); - /* initialise the endpoints now the core has been initialised */ - for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++) - s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum); + ret = device_add(&hsotg->gadget.dev); + if (ret) { + put_device(&hsotg->gadget.dev); + goto err_ep_mem; + } ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); if (ret) - goto err_add_udc; + goto err_ep_mem; s3c_hsotg_create_debug(hsotg); s3c_hsotg_dump(hsotg); - our_hsotg = hsotg; return 0; -err_add_udc: - s3c_hsotg_gate(pdev, false); - clk_disable(hsotg->clk); - clk_put(hsotg->clk); - +err_ep_mem: + kfree(eps); +err_supplies: + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); +err_irq: + free_irq(hsotg->irq, hsotg); err_regs: iounmap(hsotg->regs); @@ -3423,12 +3651,17 @@ err_regs_res: release_resource(hsotg->regs_res); kfree(hsotg->regs_res); err_clk: + clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); err_mem: kfree(hsotg); return ret; } +/** + * s3c_hsotg_remove - remove function for hsotg driver + * @pdev: The platform information for the driver + */ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) { struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); @@ -3437,7 +3670,10 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_delete_debug(hsotg); - usb_gadget_unregister_driver(hsotg->driver); + if (hsotg->driver) { + /* should have been done already by driver model core */ + usb_gadget_unregister_driver(hsotg->driver); + } free_irq(hsotg->irq, hsotg); iounmap(hsotg->regs); @@ -3445,12 +3681,13 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) release_resource(hsotg->regs_res); kfree(hsotg->regs_res); - s3c_hsotg_gate(pdev, false); + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - clk_disable(hsotg->clk); + clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); - kfree(hsotg); + device_unregister(&hsotg->gadget.dev); return 0; } diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h new file mode 100644 index 000000000000..d650b1295831 --- /dev/null +++ b/drivers/usb/gadget/s3c-hsotg.h @@ -0,0 +1,377 @@ +/* drivers/usb/gadget/s3c-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * USB2.0 Highspeed/OtG Synopsis DWC2 device block registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __REGS_USB_HSOTG_H +#define __REGS_USB_HSOTG_H __FILE__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_BSESVLD (1 << 19) +#define GOTGCTL_ASESVLD (1 << 18) +#define GOTGCTL_DBNC_SHORT (1 << 17) +#define GOTGCTL_CONID_B (1 << 16) +#define GOTGCTL_DEVHNPEN (1 << 11) +#define GOTGCTL_HSSETHNPEN (1 << 10) +#define GOTGCTL_HNPREQ (1 << 9) +#define GOTGCTL_HSTNEGSCS (1 << 8) +#define GOTGCTL_SESREQ (1 << 1) +#define GOTGCTL_SESREQSCS (1 << 0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DbnceDone (1 << 19) +#define GOTGINT_ADevTOUTChg (1 << 18) +#define GOTGINT_HstNegDet (1 << 17) +#define GOTGINT_HstnegSucStsChng (1 << 9) +#define GOTGINT_SesReqSucStsChng (1 << 8) +#define GOTGINT_SesEndDet (1 << 2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_PTxFEmpLvl (1 << 8) +#define GAHBCFG_NPTxFEmpLvl (1 << 7) +#define GAHBCFG_DMAEn (1 << 5) +#define GAHBCFG_HBstLen_MASK (0xf << 1) +#define GAHBCFG_HBstLen_SHIFT (1) +#define GAHBCFG_HBstLen_Single (0x0 << 1) +#define GAHBCFG_HBstLen_Incr (0x1 << 1) +#define GAHBCFG_HBstLen_Incr4 (0x3 << 1) +#define GAHBCFG_HBstLen_Incr8 (0x5 << 1) +#define GAHBCFG_HBstLen_Incr16 (0x7 << 1) +#define GAHBCFG_GlblIntrEn (1 << 0) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_PHYLPClkSel (1 << 15) +#define GUSBCFG_HNPCap (1 << 9) +#define GUSBCFG_SRPCap (1 << 8) +#define GUSBCFG_PHYIf16 (1 << 3) +#define GUSBCFG_TOutCal_MASK (0x7 << 0) +#define GUSBCFG_TOutCal_SHIFT (0) +#define GUSBCFG_TOutCal_LIMIT (0x7) +#define GUSBCFG_TOutCal(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) + +#define GRSTCTL_AHBIdle (1 << 31) +#define GRSTCTL_DMAReq (1 << 30) +#define GRSTCTL_TxFNum_MASK (0x1f << 6) +#define GRSTCTL_TxFNum_SHIFT (6) +#define GRSTCTL_TxFNum_LIMIT (0x1f) +#define GRSTCTL_TxFNum(_x) ((_x) << 6) +#define GRSTCTL_TxFFlsh (1 << 5) +#define GRSTCTL_RxFFlsh (1 << 4) +#define GRSTCTL_INTknQFlsh (1 << 3) +#define GRSTCTL_FrmCntrRst (1 << 2) +#define GRSTCTL_HSftRst (1 << 1) +#define GRSTCTL_CSftRst (1 << 0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) + +#define GINTSTS_WkUpInt (1 << 31) +#define GINTSTS_SessReqInt (1 << 30) +#define GINTSTS_DisconnInt (1 << 29) +#define GINTSTS_ConIDStsChng (1 << 28) +#define GINTSTS_PTxFEmp (1 << 26) +#define GINTSTS_HChInt (1 << 25) +#define GINTSTS_PrtInt (1 << 24) +#define GINTSTS_FetSusp (1 << 22) +#define GINTSTS_incompIP (1 << 21) +#define GINTSTS_IncomplSOIN (1 << 20) +#define GINTSTS_OEPInt (1 << 19) +#define GINTSTS_IEPInt (1 << 18) +#define GINTSTS_EPMis (1 << 17) +#define GINTSTS_EOPF (1 << 15) +#define GINTSTS_ISOutDrop (1 << 14) +#define GINTSTS_EnumDone (1 << 13) +#define GINTSTS_USBRst (1 << 12) +#define GINTSTS_USBSusp (1 << 11) +#define GINTSTS_ErlySusp (1 << 10) +#define GINTSTS_GOUTNakEff (1 << 7) +#define GINTSTS_GINNakEff (1 << 6) +#define GINTSTS_NPTxFEmp (1 << 5) +#define GINTSTS_RxFLvl (1 << 4) +#define GINTSTS_SOF (1 << 3) +#define GINTSTS_OTGInt (1 << 2) +#define GINTSTS_ModeMis (1 << 1) +#define GINTSTS_CurMod_Host (1 << 0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) + +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT (25) + +#define GRXSTS_PktSts_MASK (0xf << 17) +#define GRXSTS_PktSts_SHIFT (17) +#define GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) +#define GRXSTS_PktSts_OutRX (0x2 << 17) +#define GRXSTS_PktSts_OutDone (0x3 << 17) +#define GRXSTS_PktSts_SetupDone (0x4 << 17) +#define GRXSTS_PktSts_SetupRX (0x6 << 17) + +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT (15) +#define GRXSTS_ByteCnt_MASK (0x7ff << 4) +#define GRXSTS_ByteCnt_SHIFT (4) +#define GRXSTS_EPNum_MASK (0xf << 0) +#define GRXSTS_EPNum_SHIFT (0) + +#define GRXFSIZ HSOTG_REG(0x024) + +#define GNPTXFSIZ HSOTG_REG(0x028) + +#define GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) +#define GNPTXFSIZ_NPTxFDep_SHIFT (16) +#define GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) +#define GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) +#define GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) +#define GNPTXFSIZ_NPTxFStAddr_SHIFT (0) +#define GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) +#define GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) + +#define GNPTXSTS HSOTG_REG(0x02C) + +#define GNPTXSTS_NPtxQTop_MASK (0x7f << 24) +#define GNPTXSTS_NPtxQTop_SHIFT (24) + +#define GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) +#define GNPTXSTS_NPTxQSpcAvail_SHIFT (16) +#define GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) + +#define GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) +#define GNPTXSTS_NPTxFSpcAvail_SHIFT (0) +#define GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) + + +#define HPTXFSIZ HSOTG_REG(0x100) + +#define DPTXFSIZn(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) + +#define DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) +#define DPTXFSIZn_DPTxFSize_SHIFT (16) +#define DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) +#define DPTXFSIZn_DPTxFSize_LIMIT (0xffff) +#define DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) + +#define DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) +#define DPTXFSIZn_DPTxFStAddr_SHIFT (0) + +/* Device mode registers */ +#define DCFG HSOTG_REG(0x800) + +#define DCFG_EPMisCnt_MASK (0x1f << 18) +#define DCFG_EPMisCnt_SHIFT (18) +#define DCFG_EPMisCnt_LIMIT (0x1f) +#define DCFG_EPMisCnt(_x) ((_x) << 18) + +#define DCFG_PerFrInt_MASK (0x3 << 11) +#define DCFG_PerFrInt_SHIFT (11) +#define DCFG_PerFrInt_LIMIT (0x3) +#define DCFG_PerFrInt(_x) ((_x) << 11) + +#define DCFG_DevAddr_MASK (0x7f << 4) +#define DCFG_DevAddr_SHIFT (4) +#define DCFG_DevAddr_LIMIT (0x7f) +#define DCFG_DevAddr(_x) ((_x) << 4) + +#define DCFG_NZStsOUTHShk (1 << 2) + +#define DCFG_DevSpd_MASK (0x3 << 0) +#define DCFG_DevSpd_SHIFT (0) +#define DCFG_DevSpd_HS (0x0 << 0) +#define DCFG_DevSpd_FS (0x1 << 0) +#define DCFG_DevSpd_LS (0x2 << 0) +#define DCFG_DevSpd_FS48 (0x3 << 0) + +#define DCTL HSOTG_REG(0x804) + +#define DCTL_PWROnPrgDone (1 << 11) +#define DCTL_CGOUTNak (1 << 10) +#define DCTL_SGOUTNak (1 << 9) +#define DCTL_CGNPInNAK (1 << 8) +#define DCTL_SGNPInNAK (1 << 7) +#define DCTL_TstCtl_MASK (0x7 << 4) +#define DCTL_TstCtl_SHIFT (4) +#define DCTL_GOUTNakSts (1 << 3) +#define DCTL_GNPINNakSts (1 << 2) +#define DCTL_SftDiscon (1 << 1) +#define DCTL_RmtWkUpSig (1 << 0) + +#define DSTS HSOTG_REG(0x808) + +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT (8) +#define DSTS_SOFFN_LIMIT (0x3fff) +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ErraticErr (1 << 3) +#define DSTS_EnumSpd_MASK (0x3 << 1) +#define DSTS_EnumSpd_SHIFT (1) +#define DSTS_EnumSpd_HS (0x0 << 1) +#define DSTS_EnumSpd_FS (0x1 << 1) +#define DSTS_EnumSpd_LS (0x2 << 1) +#define DSTS_EnumSpd_FS48 (0x3 << 1) + +#define DSTS_SuspSts (1 << 0) + +#define DIEPMSK HSOTG_REG(0x810) + +#define DIEPMSK_TxFIFOEmpty (1 << 7) +#define DIEPMSK_INEPNakEffMsk (1 << 6) +#define DIEPMSK_INTknEPMisMsk (1 << 5) +#define DIEPMSK_INTknTXFEmpMsk (1 << 4) +#define DIEPMSK_TimeOUTMsk (1 << 3) +#define DIEPMSK_AHBErrMsk (1 << 2) +#define DIEPMSK_EPDisbldMsk (1 << 1) +#define DIEPMSK_XferComplMsk (1 << 0) + +#define DOEPMSK HSOTG_REG(0x814) + +#define DOEPMSK_Back2BackSetup (1 << 6) +#define DOEPMSK_OUTTknEPdisMsk (1 << 4) +#define DOEPMSK_SetupMsk (1 << 3) +#define DOEPMSK_AHBErrMsk (1 << 2) +#define DOEPMSK_EPDisbldMsk (1 << 1) +#define DOEPMSK_XferComplMsk (1 << 0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) + +#define DAINT_OutEP_SHIFT (16) +#define DAINT_OutEP(x) (1 << ((x) + 16)) +#define DAINT_InEP(x) (1 << (x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting differenct for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT (0) +#define D0EPCTL_MPS_64 (0x0 << 0) +#define D0EPCTL_MPS_32 (0x1 << 0) +#define D0EPCTL_MPS_16 (0x2 << 0) +#define D0EPCTL_MPS_8 (0x3 << 0) + +#define DxEPCTL_EPEna (1 << 31) +#define DxEPCTL_EPDis (1 << 30) +#define DxEPCTL_SetD1PID (1 << 29) +#define DxEPCTL_SetOddFr (1 << 29) +#define DxEPCTL_SetD0PID (1 << 28) +#define DxEPCTL_SetEvenFr (1 << 28) +#define DxEPCTL_SNAK (1 << 27) +#define DxEPCTL_CNAK (1 << 26) +#define DxEPCTL_TxFNum_MASK (0xf << 22) +#define DxEPCTL_TxFNum_SHIFT (22) +#define DxEPCTL_TxFNum_LIMIT (0xf) +#define DxEPCTL_TxFNum(_x) ((_x) << 22) + +#define DxEPCTL_Stall (1 << 21) +#define DxEPCTL_Snp (1 << 20) +#define DxEPCTL_EPType_MASK (0x3 << 18) +#define DxEPCTL_EPType_SHIFT (18) +#define DxEPCTL_EPType_Control (0x0 << 18) +#define DxEPCTL_EPType_Iso (0x1 << 18) +#define DxEPCTL_EPType_Bulk (0x2 << 18) +#define DxEPCTL_EPType_Intterupt (0x3 << 18) + +#define DxEPCTL_NAKsts (1 << 17) +#define DxEPCTL_DPID (1 << 16) +#define DxEPCTL_EOFrNum (1 << 16) +#define DxEPCTL_USBActEp (1 << 15) +#define DxEPCTL_NextEp_MASK (0xf << 11) +#define DxEPCTL_NextEp_SHIFT (11) +#define DxEPCTL_NextEp_LIMIT (0xf) +#define DxEPCTL_NextEp(_x) ((_x) << 11) + +#define DxEPCTL_MPS_MASK (0x7ff << 0) +#define DxEPCTL_MPS_SHIFT (0) +#define DxEPCTL_MPS_LIMIT (0x7ff) +#define DxEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) + +#define DxEPINT_INEPNakEff (1 << 6) +#define DxEPINT_Back2BackSetup (1 << 6) +#define DxEPINT_INTknEPMis (1 << 5) +#define DxEPINT_INTknTXFEmp (1 << 4) +#define DxEPINT_OUTTknEPdis (1 << 4) +#define DxEPINT_Timeout (1 << 3) +#define DxEPINT_Setup (1 << 3) +#define DxEPINT_AHBErr (1 << 2) +#define DxEPINT_EPDisbld (1 << 1) +#define DxEPINT_XferCompl (1 << 0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) + +#define DIEPTSIZ0_PktCnt_MASK (0x3 << 19) +#define DIEPTSIZ0_PktCnt_SHIFT (19) +#define DIEPTSIZ0_PktCnt_LIMIT (0x3) +#define DIEPTSIZ0_PktCnt(_x) ((_x) << 19) + +#define DIEPTSIZ0_XferSize_MASK (0x7f << 0) +#define DIEPTSIZ0_XferSize_SHIFT (0) +#define DIEPTSIZ0_XferSize_LIMIT (0x7f) +#define DIEPTSIZ0_XferSize(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCnt_SHIFT (29) +#define DOEPTSIZ0_SUPCnt_LIMIT (0x3) +#define DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) + +#define DOEPTSIZ0_PktCnt (1 << 19) +#define DOEPTSIZ0_XferSize_MASK (0x7f << 0) +#define DOEPTSIZ0_XferSize_SHIFT (0) + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) + +#define DxEPTSIZ_MC_MASK (0x3 << 29) +#define DxEPTSIZ_MC_SHIFT (29) +#define DxEPTSIZ_MC_LIMIT (0x3) +#define DxEPTSIZ_MC(_x) ((_x) << 29) + +#define DxEPTSIZ_PktCnt_MASK (0x3ff << 19) +#define DxEPTSIZ_PktCnt_SHIFT (19) +#define DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) +#define DxEPTSIZ_PktCnt_LIMIT (0x3ff) +#define DxEPTSIZ_PktCnt(_x) ((_x) << 19) + +#define DxEPTSIZ_XferSize_MASK (0x7ffff << 0) +#define DxEPTSIZ_XferSize_SHIFT (0) +#define DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DxEPTSIZ_XferSize_LIMIT (0x7ffff) +#define DxEPTSIZ_XferSize(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +#endif /* __REGS_USB_HSOTG_H */ diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index cef9b82ff911..236b271871a0 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -110,7 +110,6 @@ struct s3c_hsudc_ep { struct usb_ep ep; char name[20]; struct s3c_hsudc *dev; - const struct usb_endpoint_descriptor *desc; struct list_head queue; u8 stopped; u8 wedge; @@ -761,7 +760,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, u32 ecr = 0; hsep = our_ep(_ep); - if (!_ep || !desc || hsep->desc || _ep->name == ep0name + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || hsep->bEndpointAddress != desc->bEndpointAddress || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) @@ -783,7 +782,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, writel(ecr, hsudc->regs + S3C_ECR); hsep->stopped = hsep->wedge = 0; - hsep->desc = desc; + hsep->ep.desc = desc; hsep->ep.maxpacket = usb_endpoint_maxp(desc); s3c_hsudc_set_halt(_ep, 0); @@ -806,7 +805,7 @@ static int s3c_hsudc_ep_disable(struct usb_ep *_ep) struct s3c_hsudc *hsudc = hsep->dev; unsigned long flags; - if (!_ep || !hsep->desc) + if (!_ep || !hsep->ep.desc) return -EINVAL; spin_lock_irqsave(&hsudc->lock, flags); @@ -816,7 +815,6 @@ static int s3c_hsudc_ep_disable(struct usb_ep *_ep) s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); - hsep->desc = 0; hsep->ep.desc = NULL; hsep->stopped = 1; @@ -1006,7 +1004,6 @@ static void s3c_hsudc_initep(struct s3c_hsudc *hsudc, hsep->ep.maxpacket = epnum ? 512 : 64; hsep->ep.ops = &s3c_hsudc_ep_ops; hsep->fifo = hsudc->regs + S3C_BR(epnum); - hsep->desc = 0; hsep->ep.desc = NULL; hsep->stopped = 0; hsep->wedge = 0; diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 195524cde6c3..f2e51f50e528 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1062,7 +1062,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, ep = to_s3c2410_ep(_ep); - if (!_ep || !desc || ep->desc + if (!_ep || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; @@ -1075,7 +1075,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, local_irq_save (flags); _ep->maxpacket = max & 0x7ff; - ep->desc = desc; + ep->ep.desc = desc; ep->halted = 0; ep->bEndpointAddress = desc->bEndpointAddress; @@ -1136,7 +1136,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep) unsigned long flags; u32 int_en_reg; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { dprintk(DEBUG_NORMAL, "%s not enabled\n", _ep ? ep->ep.name : NULL); return -EINVAL; @@ -1146,7 +1146,6 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep) dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name); - ep->desc = NULL; ep->ep.desc = NULL; ep->halted = 1; @@ -1195,7 +1194,7 @@ s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); - if (!ep || !_req || (!ep->desc && _ep->name != ep0name)) + if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) return; WARN_ON (!list_empty (&req->queue)); @@ -1215,7 +1214,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, int fifo_count = 0; unsigned long flags; - if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__); return -EINVAL; } @@ -1363,7 +1362,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) unsigned long flags; u32 idx; - if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__); return -EINVAL; } @@ -1629,7 +1628,6 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); ep->dev = dev; - ep->desc = NULL; ep->ep.desc = NULL; ep->halted = 0; INIT_LIST_HEAD (&ep->queue); diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h index 1653bae08b80..3e80fd5c820f 100644 --- a/drivers/usb/gadget/s3c2410_udc.h +++ b/drivers/usb/gadget/s3c2410_udc.h @@ -19,7 +19,6 @@ struct s3c2410_ep { unsigned long last_io; /* jiffies timestamp */ struct usb_gadget *gadget; struct s3c2410_udc *dev; - const struct usb_endpoint_descriptor *desc; struct usb_ep ep; u8 num; diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c new file mode 100644 index 000000000000..c46439c8dd74 --- /dev/null +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -0,0 +1,2480 @@ +/* Target based USB-Gadget + * + * UAS protocol handling, target callbacks, configfs handling, + * BBB (USB Mass Storage Class Bulk-Only (BBB) and Transport protocol handling. + * + * Author: Sebastian Andrzej Siewior <bigeasy at linutronix dot de> + * License: GPLv2 as published by FSF. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/configfs.h> +#include <linux/ctype.h> +#include <linux/usb/ch9.h> +#include <linux/usb/composite.h> +#include <linux/usb/gadget.h> +#include <linux/usb/storage.h> +#include <scsi/scsi.h> +#include <scsi/scsi_tcq.h> +#include <target/target_core_base.h> +#include <target/target_core_fabric.h> +#include <target/target_core_fabric_configfs.h> +#include <target/target_core_configfs.h> +#include <target/configfs_macros.h> +#include <asm/unaligned.h> + +#include "usbstring.c" +#include "epautoconf.c" +#include "config.c" +#include "composite.c" + +#include "tcm_usb_gadget.h" + +static struct target_fabric_configfs *usbg_fabric_configfs; + +static inline struct f_uas *to_f_uas(struct usb_function *f) +{ + return container_of(f, struct f_uas, function); +} + +static void usbg_cmd_release(struct kref *); + +static inline void usbg_cleanup_cmd(struct usbg_cmd *cmd) +{ + kref_put(&cmd->ref, usbg_cmd_release); +} + +/* Start bot.c code */ + +static int bot_enqueue_cmd_cbw(struct f_uas *fu) +{ + int ret; + + if (fu->flags & USBG_BOT_CMD_PEND) + return 0; + + ret = usb_ep_queue(fu->ep_out, fu->cmd.req, GFP_ATOMIC); + if (!ret) + fu->flags |= USBG_BOT_CMD_PEND; + return ret; +} + +static void bot_status_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct usbg_cmd *cmd = req->context; + struct f_uas *fu = cmd->fu; + + usbg_cleanup_cmd(cmd); + if (req->status < 0) { + pr_err("ERR %s(%d)\n", __func__, __LINE__); + return; + } + + /* CSW completed, wait for next CBW */ + bot_enqueue_cmd_cbw(fu); +} + +static void bot_enqueue_sense_code(struct f_uas *fu, struct usbg_cmd *cmd) +{ + struct bulk_cs_wrap *csw = &fu->bot_status.csw; + int ret; + u8 *sense; + unsigned int csw_stat; + + csw_stat = cmd->csw_code; + + /* + * We can't send SENSE as a response. So we take ASC & ASCQ from our + * sense buffer and queue it and hope the host sends a REQUEST_SENSE + * command where it learns why we failed. + */ + sense = cmd->sense_iu.sense; + + csw->Tag = cmd->bot_tag; + csw->Status = csw_stat; + fu->bot_status.req->context = cmd; + ret = usb_ep_queue(fu->ep_in, fu->bot_status.req, GFP_ATOMIC); + if (ret) + pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret); +} + +static void bot_err_compl(struct usb_ep *ep, struct usb_request *req) +{ + struct usbg_cmd *cmd = req->context; + struct f_uas *fu = cmd->fu; + + if (req->status < 0) + pr_err("ERR %s(%d)\n", __func__, __LINE__); + + if (cmd->data_len) { + if (cmd->data_len > ep->maxpacket) { + req->length = ep->maxpacket; + cmd->data_len -= ep->maxpacket; + } else { + req->length = cmd->data_len; + cmd->data_len = 0; + } + + usb_ep_queue(ep, req, GFP_ATOMIC); + return ; + } + bot_enqueue_sense_code(fu, cmd); +} + +static void bot_send_bad_status(struct usbg_cmd *cmd) +{ + struct f_uas *fu = cmd->fu; + struct bulk_cs_wrap *csw = &fu->bot_status.csw; + struct usb_request *req; + struct usb_ep *ep; + + csw->Residue = cpu_to_le32(cmd->data_len); + + if (cmd->data_len) { + if (cmd->is_read) { + ep = fu->ep_in; + req = fu->bot_req_in; + } else { + ep = fu->ep_out; + req = fu->bot_req_out; + } + + if (cmd->data_len > fu->ep_in->maxpacket) { + req->length = ep->maxpacket; + cmd->data_len -= ep->maxpacket; + } else { + req->length = cmd->data_len; + cmd->data_len = 0; + } + req->complete = bot_err_compl; + req->context = cmd; + req->buf = fu->cmd.buf; + usb_ep_queue(ep, req, GFP_KERNEL); + } else { + bot_enqueue_sense_code(fu, cmd); + } +} + +static int bot_send_status(struct usbg_cmd *cmd, bool moved_data) +{ + struct f_uas *fu = cmd->fu; + struct bulk_cs_wrap *csw = &fu->bot_status.csw; + int ret; + + if (cmd->se_cmd.scsi_status == SAM_STAT_GOOD) { + if (!moved_data && cmd->data_len) { + /* + * the host wants to move data, we don't. Fill / empty + * the pipe and then send the csw with reside set. + */ + cmd->csw_code = US_BULK_STAT_OK; + bot_send_bad_status(cmd); + return 0; + } + + csw->Tag = cmd->bot_tag; + csw->Residue = cpu_to_le32(0); + csw->Status = US_BULK_STAT_OK; + fu->bot_status.req->context = cmd; + + ret = usb_ep_queue(fu->ep_in, fu->bot_status.req, GFP_KERNEL); + if (ret) + pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret); + } else { + cmd->csw_code = US_BULK_STAT_FAIL; + bot_send_bad_status(cmd); + } + return 0; +} + +/* + * Called after command (no data transfer) or after the write (to device) + * operation is completed + */ +static int bot_send_status_response(struct usbg_cmd *cmd) +{ + bool moved_data = false; + + if (!cmd->is_read) + moved_data = true; + return bot_send_status(cmd, moved_data); +} + +/* Read request completed, now we have to send the CSW */ +static void bot_read_compl(struct usb_ep *ep, struct usb_request *req) +{ + struct usbg_cmd *cmd = req->context; + + if (req->status < 0) + pr_err("ERR %s(%d)\n", __func__, __LINE__); + + bot_send_status(cmd, true); +} + +static int bot_send_read_response(struct usbg_cmd *cmd) +{ + struct f_uas *fu = cmd->fu; + struct se_cmd *se_cmd = &cmd->se_cmd; + struct usb_gadget *gadget = fuas_to_gadget(fu); + int ret; + + if (!cmd->data_len) { + cmd->csw_code = US_BULK_STAT_PHASE; + bot_send_bad_status(cmd); + return 0; + } + + if (!gadget->sg_supported) { + cmd->data_buf = kmalloc(se_cmd->data_length, GFP_ATOMIC); + if (!cmd->data_buf) + return -ENOMEM; + + sg_copy_to_buffer(se_cmd->t_data_sg, + se_cmd->t_data_nents, + cmd->data_buf, + se_cmd->data_length); + + fu->bot_req_in->buf = cmd->data_buf; + } else { + fu->bot_req_in->buf = NULL; + fu->bot_req_in->num_sgs = se_cmd->t_data_nents; + fu->bot_req_in->sg = se_cmd->t_data_sg; + } + + fu->bot_req_in->complete = bot_read_compl; + fu->bot_req_in->length = se_cmd->data_length; + fu->bot_req_in->context = cmd; + ret = usb_ep_queue(fu->ep_in, fu->bot_req_in, GFP_ATOMIC); + if (ret) + pr_err("%s(%d)\n", __func__, __LINE__); + return 0; +} + +static void usbg_data_write_cmpl(struct usb_ep *, struct usb_request *); +static int usbg_prepare_w_request(struct usbg_cmd *, struct usb_request *); + +static int bot_send_write_request(struct usbg_cmd *cmd) +{ + struct f_uas *fu = cmd->fu; + struct se_cmd *se_cmd = &cmd->se_cmd; + struct usb_gadget *gadget = fuas_to_gadget(fu); + int ret; + + init_completion(&cmd->write_complete); + cmd->fu = fu; + + if (!cmd->data_len) { + cmd->csw_code = US_BULK_STAT_PHASE; + return -EINVAL; + } + + if (!gadget->sg_supported) { + cmd->data_buf = kmalloc(se_cmd->data_length, GFP_KERNEL); + if (!cmd->data_buf) + return -ENOMEM; + + fu->bot_req_out->buf = cmd->data_buf; + } else { + fu->bot_req_out->buf = NULL; + fu->bot_req_out->num_sgs = se_cmd->t_data_nents; + fu->bot_req_out->sg = se_cmd->t_data_sg; + } + + fu->bot_req_out->complete = usbg_data_write_cmpl; + fu->bot_req_out->length = se_cmd->data_length; + fu->bot_req_out->context = cmd; + + ret = usbg_prepare_w_request(cmd, fu->bot_req_out); + if (ret) + goto cleanup; + ret = usb_ep_queue(fu->ep_out, fu->bot_req_out, GFP_KERNEL); + if (ret) + pr_err("%s(%d)\n", __func__, __LINE__); + + wait_for_completion(&cmd->write_complete); + transport_generic_process_write(se_cmd); +cleanup: + return ret; +} + +static int bot_submit_command(struct f_uas *, void *, unsigned int); + +static void bot_cmd_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_uas *fu = req->context; + int ret; + + fu->flags &= ~USBG_BOT_CMD_PEND; + + if (req->status < 0) + return; + + ret = bot_submit_command(fu, req->buf, req->actual); + if (ret) + pr_err("%s(%d): %d\n", __func__, __LINE__, ret); +} + +static int bot_prepare_reqs(struct f_uas *fu) +{ + int ret; + + fu->bot_req_in = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL); + if (!fu->bot_req_in) + goto err; + + fu->bot_req_out = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL); + if (!fu->bot_req_out) + goto err_out; + + fu->cmd.req = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL); + if (!fu->cmd.req) + goto err_cmd; + + fu->bot_status.req = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL); + if (!fu->bot_status.req) + goto err_sts; + + fu->bot_status.req->buf = &fu->bot_status.csw; + fu->bot_status.req->length = US_BULK_CS_WRAP_LEN; + fu->bot_status.req->complete = bot_status_complete; + fu->bot_status.csw.Signature = cpu_to_le32(US_BULK_CS_SIGN); + + fu->cmd.buf = kmalloc(fu->ep_out->maxpacket, GFP_KERNEL); + if (!fu->cmd.buf) + goto err_buf; + + fu->cmd.req->complete = bot_cmd_complete; + fu->cmd.req->buf = fu->cmd.buf; + fu->cmd.req->length = fu->ep_out->maxpacket; + fu->cmd.req->context = fu; + + ret = bot_enqueue_cmd_cbw(fu); + if (ret) + goto err_queue; + return 0; +err_queue: + kfree(fu->cmd.buf); + fu->cmd.buf = NULL; +err_buf: + usb_ep_free_request(fu->ep_in, fu->bot_status.req); +err_sts: + usb_ep_free_request(fu->ep_out, fu->cmd.req); + fu->cmd.req = NULL; +err_cmd: + usb_ep_free_request(fu->ep_out, fu->bot_req_out); + fu->bot_req_out = NULL; +err_out: + usb_ep_free_request(fu->ep_in, fu->bot_req_in); + fu->bot_req_in = NULL; +err: + pr_err("BOT: endpoint setup failed\n"); + return -ENOMEM; +} + +void bot_cleanup_old_alt(struct f_uas *fu) +{ + if (!(fu->flags & USBG_ENABLED)) + return; + + usb_ep_disable(fu->ep_in); + usb_ep_disable(fu->ep_out); + + if (!fu->bot_req_in) + return; + + usb_ep_free_request(fu->ep_in, fu->bot_req_in); + usb_ep_free_request(fu->ep_out, fu->bot_req_out); + usb_ep_free_request(fu->ep_out, fu->cmd.req); + usb_ep_free_request(fu->ep_out, fu->bot_status.req); + + kfree(fu->cmd.buf); + + fu->bot_req_in = NULL; + fu->bot_req_out = NULL; + fu->cmd.req = NULL; + fu->bot_status.req = NULL; + fu->cmd.buf = NULL; +} + +static void bot_set_alt(struct f_uas *fu) +{ + struct usb_function *f = &fu->function; + struct usb_gadget *gadget = f->config->cdev->gadget; + int ret; + + fu->flags = USBG_IS_BOT; + + config_ep_by_speed(gadget, f, fu->ep_in); + ret = usb_ep_enable(fu->ep_in); + if (ret) + goto err_b_in; + + config_ep_by_speed(gadget, f, fu->ep_out); + ret = usb_ep_enable(fu->ep_out); + if (ret) + goto err_b_out; + + ret = bot_prepare_reqs(fu); + if (ret) + goto err_wq; + fu->flags |= USBG_ENABLED; + pr_info("Using the BOT protocol\n"); + return; +err_wq: + usb_ep_disable(fu->ep_out); +err_b_out: + usb_ep_disable(fu->ep_in); +err_b_in: + fu->flags = USBG_IS_BOT; +} + +static int usbg_bot_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct f_uas *fu = to_f_uas(f); + struct usb_composite_dev *cdev = f->config->cdev; + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + int luns; + u8 *ret_lun; + + switch (ctrl->bRequest) { + case US_BULK_GET_MAX_LUN: + if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE)) + return -ENOTSUPP; + + if (w_length < 1) + return -EINVAL; + if (w_value != 0) + return -EINVAL; + luns = atomic_read(&fu->tpg->tpg_port_count); + if (!luns) { + pr_err("No LUNs configured?\n"); + return -EINVAL; + } + /* + * If 4 LUNs are present we return 3 i.e. LUN 0..3 can be + * accessed. The upper limit is 0xf + */ + luns--; + if (luns > 0xf) { + pr_info_once("Limiting the number of luns to 16\n"); + luns = 0xf; + } + ret_lun = cdev->req->buf; + *ret_lun = luns; + cdev->req->length = 1; + return usb_ep_queue(cdev->gadget->ep0, cdev->req, GFP_ATOMIC); + break; + + case US_BULK_RESET_REQUEST: + /* XXX maybe we should remove previous requests for IN + OUT */ + bot_enqueue_cmd_cbw(fu); + return 0; + break; + }; + return -ENOTSUPP; +} + +/* Start uas.c code */ + +static void uasp_cleanup_one_stream(struct f_uas *fu, struct uas_stream *stream) +{ + /* We have either all three allocated or none */ + if (!stream->req_in) + return; + + usb_ep_free_request(fu->ep_in, stream->req_in); + usb_ep_free_request(fu->ep_out, stream->req_out); + usb_ep_free_request(fu->ep_status, stream->req_status); + + stream->req_in = NULL; + stream->req_out = NULL; + stream->req_status = NULL; +} + +static void uasp_free_cmdreq(struct f_uas *fu) +{ + usb_ep_free_request(fu->ep_cmd, fu->cmd.req); + kfree(fu->cmd.buf); + fu->cmd.req = NULL; + fu->cmd.buf = NULL; +} + +static void uasp_cleanup_old_alt(struct f_uas *fu) +{ + int i; + + if (!(fu->flags & USBG_ENABLED)) + return; + + usb_ep_disable(fu->ep_in); + usb_ep_disable(fu->ep_out); + usb_ep_disable(fu->ep_status); + usb_ep_disable(fu->ep_cmd); + + for (i = 0; i < UASP_SS_EP_COMP_NUM_STREAMS; i++) + uasp_cleanup_one_stream(fu, &fu->stream[i]); + uasp_free_cmdreq(fu); +} + +static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req); + +static int uasp_prepare_r_request(struct usbg_cmd *cmd) +{ + struct se_cmd *se_cmd = &cmd->se_cmd; + struct f_uas *fu = cmd->fu; + struct usb_gadget *gadget = fuas_to_gadget(fu); + struct uas_stream *stream = cmd->stream; + + if (!gadget->sg_supported) { + cmd->data_buf = kmalloc(se_cmd->data_length, GFP_ATOMIC); + if (!cmd->data_buf) + return -ENOMEM; + + sg_copy_to_buffer(se_cmd->t_data_sg, + se_cmd->t_data_nents, + cmd->data_buf, + se_cmd->data_length); + + stream->req_in->buf = cmd->data_buf; + } else { + stream->req_in->buf = NULL; + stream->req_in->num_sgs = se_cmd->t_data_nents; + stream->req_in->sg = se_cmd->t_data_sg; + } + + stream->req_in->complete = uasp_status_data_cmpl; + stream->req_in->length = se_cmd->data_length; + stream->req_in->context = cmd; + + cmd->state = UASP_SEND_STATUS; + return 0; +} + +static void uasp_prepare_status(struct usbg_cmd *cmd) +{ + struct se_cmd *se_cmd = &cmd->se_cmd; + struct sense_iu *iu = &cmd->sense_iu; + struct uas_stream *stream = cmd->stream; + + cmd->state = UASP_QUEUE_COMMAND; + iu->iu_id = IU_ID_STATUS; + iu->tag = cpu_to_be16(cmd->tag); + + /* + * iu->status_qual = cpu_to_be16(STATUS QUALIFIER SAM-4. Where R U?); + */ + iu->len = cpu_to_be16(se_cmd->scsi_sense_length); + iu->status = se_cmd->scsi_status; + stream->req_status->context = cmd; + stream->req_status->length = se_cmd->scsi_sense_length + 16; + stream->req_status->buf = iu; + stream->req_status->complete = uasp_status_data_cmpl; +} + +static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req) +{ + struct usbg_cmd *cmd = req->context; + struct uas_stream *stream = cmd->stream; + struct f_uas *fu = cmd->fu; + int ret; + + if (req->status < 0) + goto cleanup; + + switch (cmd->state) { + case UASP_SEND_DATA: + ret = uasp_prepare_r_request(cmd); + if (ret) + goto cleanup; + ret = usb_ep_queue(fu->ep_in, stream->req_in, GFP_ATOMIC); + if (ret) + pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); + break; + + case UASP_RECEIVE_DATA: + ret = usbg_prepare_w_request(cmd, stream->req_out); + if (ret) + goto cleanup; + ret = usb_ep_queue(fu->ep_out, stream->req_out, GFP_ATOMIC); + if (ret) + pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); + break; + + case UASP_SEND_STATUS: + uasp_prepare_status(cmd); + ret = usb_ep_queue(fu->ep_status, stream->req_status, + GFP_ATOMIC); + if (ret) + pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); + break; + + case UASP_QUEUE_COMMAND: + usbg_cleanup_cmd(cmd); + usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC); + break; + + default: + BUG(); + }; + return; + +cleanup: + usbg_cleanup_cmd(cmd); +} + +static int uasp_send_status_response(struct usbg_cmd *cmd) +{ + struct f_uas *fu = cmd->fu; + struct uas_stream *stream = cmd->stream; + struct sense_iu *iu = &cmd->sense_iu; + + iu->tag = cpu_to_be16(cmd->tag); + stream->req_status->complete = uasp_status_data_cmpl; + stream->req_status->context = cmd; + cmd->fu = fu; + uasp_prepare_status(cmd); + return usb_ep_queue(fu->ep_status, stream->req_status, GFP_ATOMIC); +} + +static int uasp_send_read_response(struct usbg_cmd *cmd) +{ + struct f_uas *fu = cmd->fu; + struct uas_stream *stream = cmd->stream; + struct sense_iu *iu = &cmd->sense_iu; + int ret; + + cmd->fu = fu; + + iu->tag = cpu_to_be16(cmd->tag); + if (fu->flags & USBG_USE_STREAMS) { + + ret = uasp_prepare_r_request(cmd); + if (ret) + goto out; + ret = usb_ep_queue(fu->ep_in, stream->req_in, GFP_ATOMIC); + if (ret) { + pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); + kfree(cmd->data_buf); + cmd->data_buf = NULL; + } + + } else { + + iu->iu_id = IU_ID_READ_READY; + iu->tag = cpu_to_be16(cmd->tag); + + stream->req_status->complete = uasp_status_data_cmpl; + stream->req_status->context = cmd; + + cmd->state = UASP_SEND_DATA; + stream->req_status->buf = iu; + stream->req_status->length = sizeof(struct iu); + + ret = usb_ep_queue(fu->ep_status, stream->req_status, + GFP_ATOMIC); + if (ret) + pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); + } +out: + return ret; +} + +static int uasp_send_write_request(struct usbg_cmd *cmd) +{ + struct f_uas *fu = cmd->fu; + struct se_cmd *se_cmd = &cmd->se_cmd; + struct uas_stream *stream = cmd->stream; + struct sense_iu *iu = &cmd->sense_iu; + int ret; + + init_completion(&cmd->write_complete); + cmd->fu = fu; + + iu->tag = cpu_to_be16(cmd->tag); + + if (fu->flags & USBG_USE_STREAMS) { + + ret = usbg_prepare_w_request(cmd, stream->req_out); + if (ret) + goto cleanup; + ret = usb_ep_queue(fu->ep_out, stream->req_out, GFP_ATOMIC); + if (ret) + pr_err("%s(%d)\n", __func__, __LINE__); + + } else { + + iu->iu_id = IU_ID_WRITE_READY; + iu->tag = cpu_to_be16(cmd->tag); + + stream->req_status->complete = uasp_status_data_cmpl; + stream->req_status->context = cmd; + + cmd->state = UASP_RECEIVE_DATA; + stream->req_status->buf = iu; + stream->req_status->length = sizeof(struct iu); + + ret = usb_ep_queue(fu->ep_status, stream->req_status, + GFP_ATOMIC); + if (ret) + pr_err("%s(%d)\n", __func__, __LINE__); + } + + wait_for_completion(&cmd->write_complete); + transport_generic_process_write(se_cmd); +cleanup: + return ret; +} + +static int usbg_submit_command(struct f_uas *, void *, unsigned int); + +static void uasp_cmd_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_uas *fu = req->context; + int ret; + + if (req->status < 0) + return; + + ret = usbg_submit_command(fu, req->buf, req->actual); + /* + * Once we tune for performance enqueue the command req here again so + * we can receive a second command while we processing this one. Pay + * attention to properly sync STAUS endpoint with DATA IN + OUT so you + * don't break HS. + */ + if (!ret) + return; + usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC); +} + +static int uasp_alloc_stream_res(struct f_uas *fu, struct uas_stream *stream) +{ + stream->req_in = usb_ep_alloc_request(fu->ep_in, GFP_KERNEL); + if (!stream->req_in) + goto out; + + stream->req_out = usb_ep_alloc_request(fu->ep_out, GFP_KERNEL); + if (!stream->req_out) + goto err_out; + + stream->req_status = usb_ep_alloc_request(fu->ep_status, GFP_KERNEL); + if (!stream->req_status) + goto err_sts; + + return 0; +err_sts: + usb_ep_free_request(fu->ep_status, stream->req_status); + stream->req_status = NULL; +err_out: + usb_ep_free_request(fu->ep_out, stream->req_out); + stream->req_out = NULL; +out: + return -ENOMEM; +} + +static int uasp_alloc_cmd(struct f_uas *fu) +{ + fu->cmd.req = usb_ep_alloc_request(fu->ep_cmd, GFP_KERNEL); + if (!fu->cmd.req) + goto err; + + fu->cmd.buf = kmalloc(fu->ep_cmd->maxpacket, GFP_KERNEL); + if (!fu->cmd.buf) + goto err_buf; + + fu->cmd.req->complete = uasp_cmd_complete; + fu->cmd.req->buf = fu->cmd.buf; + fu->cmd.req->length = fu->ep_cmd->maxpacket; + fu->cmd.req->context = fu; + return 0; + +err_buf: + usb_ep_free_request(fu->ep_cmd, fu->cmd.req); +err: + return -ENOMEM; +} + +static void uasp_setup_stream_res(struct f_uas *fu, int max_streams) +{ + int i; + + for (i = 0; i < max_streams; i++) { + struct uas_stream *s = &fu->stream[i]; + + s->req_in->stream_id = i + 1; + s->req_out->stream_id = i + 1; + s->req_status->stream_id = i + 1; + } +} + +static int uasp_prepare_reqs(struct f_uas *fu) +{ + int ret; + int i; + int max_streams; + + if (fu->flags & USBG_USE_STREAMS) + max_streams = UASP_SS_EP_COMP_NUM_STREAMS; + else + max_streams = 1; + + for (i = 0; i < max_streams; i++) { + ret = uasp_alloc_stream_res(fu, &fu->stream[i]); + if (ret) + goto err_cleanup; + } + + ret = uasp_alloc_cmd(fu); + if (ret) + goto err_free_stream; + uasp_setup_stream_res(fu, max_streams); + + ret = usb_ep_queue(fu->ep_cmd, fu->cmd.req, GFP_ATOMIC); + if (ret) + goto err_free_stream; + + return 0; + +err_free_stream: + uasp_free_cmdreq(fu); + +err_cleanup: + if (i) { + do { + uasp_cleanup_one_stream(fu, &fu->stream[i - 1]); + i--; + } while (i); + } + pr_err("UASP: endpoint setup failed\n"); + return ret; +} + +static void uasp_set_alt(struct f_uas *fu) +{ + struct usb_function *f = &fu->function; + struct usb_gadget *gadget = f->config->cdev->gadget; + int ret; + + fu->flags = USBG_IS_UAS; + + if (gadget->speed == USB_SPEED_SUPER) + fu->flags |= USBG_USE_STREAMS; + + config_ep_by_speed(gadget, f, fu->ep_in); + ret = usb_ep_enable(fu->ep_in); + if (ret) + goto err_b_in; + + config_ep_by_speed(gadget, f, fu->ep_out); + ret = usb_ep_enable(fu->ep_out); + if (ret) + goto err_b_out; + + config_ep_by_speed(gadget, f, fu->ep_cmd); + ret = usb_ep_enable(fu->ep_cmd); + if (ret) + goto err_cmd; + config_ep_by_speed(gadget, f, fu->ep_status); + ret = usb_ep_enable(fu->ep_status); + if (ret) + goto err_status; + + ret = uasp_prepare_reqs(fu); + if (ret) + goto err_wq; + fu->flags |= USBG_ENABLED; + + pr_info("Using the UAS protocol\n"); + return; +err_wq: + usb_ep_disable(fu->ep_status); +err_status: + usb_ep_disable(fu->ep_cmd); +err_cmd: + usb_ep_disable(fu->ep_out); +err_b_out: + usb_ep_disable(fu->ep_in); +err_b_in: + fu->flags = 0; +} + +static int get_cmd_dir(const unsigned char *cdb) +{ + int ret; + + switch (cdb[0]) { + case READ_6: + case READ_10: + case READ_12: + case READ_16: + case INQUIRY: + case MODE_SENSE: + case MODE_SENSE_10: + case SERVICE_ACTION_IN: + case MAINTENANCE_IN: + case PERSISTENT_RESERVE_IN: + case SECURITY_PROTOCOL_IN: + case ACCESS_CONTROL_IN: + case REPORT_LUNS: + case READ_BLOCK_LIMITS: + case READ_POSITION: + case READ_CAPACITY: + case READ_TOC: + case READ_FORMAT_CAPACITIES: + case REQUEST_SENSE: + ret = DMA_FROM_DEVICE; + break; + + case WRITE_6: + case WRITE_10: + case WRITE_12: + case WRITE_16: + case MODE_SELECT: + case MODE_SELECT_10: + case WRITE_VERIFY: + case WRITE_VERIFY_12: + case PERSISTENT_RESERVE_OUT: + case MAINTENANCE_OUT: + case SECURITY_PROTOCOL_OUT: + case ACCESS_CONTROL_OUT: + ret = DMA_TO_DEVICE; + break; + case ALLOW_MEDIUM_REMOVAL: + case TEST_UNIT_READY: + case SYNCHRONIZE_CACHE: + case START_STOP: + case ERASE: + case REZERO_UNIT: + case SEEK_10: + case SPACE: + case VERIFY: + case WRITE_FILEMARKS: + ret = DMA_NONE; + break; + default: + pr_warn("target: Unknown data direction for SCSI Opcode " + "0x%02x\n", cdb[0]); + ret = -EINVAL; + } + return ret; +} + +static void usbg_data_write_cmpl(struct usb_ep *ep, struct usb_request *req) +{ + struct usbg_cmd *cmd = req->context; + struct se_cmd *se_cmd = &cmd->se_cmd; + + if (req->status < 0) { + pr_err("%s() state %d transfer failed\n", __func__, cmd->state); + goto cleanup; + } + + if (req->num_sgs == 0) { + sg_copy_from_buffer(se_cmd->t_data_sg, + se_cmd->t_data_nents, + cmd->data_buf, + se_cmd->data_length); + } + + complete(&cmd->write_complete); + return; + +cleanup: + usbg_cleanup_cmd(cmd); +} + +static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req) +{ + struct se_cmd *se_cmd = &cmd->se_cmd; + struct f_uas *fu = cmd->fu; + struct usb_gadget *gadget = fuas_to_gadget(fu); + + if (!gadget->sg_supported) { + cmd->data_buf = kmalloc(se_cmd->data_length, GFP_ATOMIC); + if (!cmd->data_buf) + return -ENOMEM; + + req->buf = cmd->data_buf; + } else { + req->buf = NULL; + req->num_sgs = se_cmd->t_data_nents; + req->sg = se_cmd->t_data_sg; + } + + req->complete = usbg_data_write_cmpl; + req->length = se_cmd->data_length; + req->context = cmd; + return 0; +} + +static int usbg_send_status_response(struct se_cmd *se_cmd) +{ + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, + se_cmd); + struct f_uas *fu = cmd->fu; + + if (fu->flags & USBG_IS_BOT) + return bot_send_status_response(cmd); + else + return uasp_send_status_response(cmd); +} + +static int usbg_send_write_request(struct se_cmd *se_cmd) +{ + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, + se_cmd); + struct f_uas *fu = cmd->fu; + + if (fu->flags & USBG_IS_BOT) + return bot_send_write_request(cmd); + else + return uasp_send_write_request(cmd); +} + +static int usbg_send_read_response(struct se_cmd *se_cmd) +{ + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, + se_cmd); + struct f_uas *fu = cmd->fu; + + if (fu->flags & USBG_IS_BOT) + return bot_send_read_response(cmd); + else + return uasp_send_read_response(cmd); +} + +static void usbg_cmd_work(struct work_struct *work) +{ + struct usbg_cmd *cmd = container_of(work, struct usbg_cmd, work); + struct se_cmd *se_cmd; + struct tcm_usbg_nexus *tv_nexus; + struct usbg_tpg *tpg; + int dir; + + se_cmd = &cmd->se_cmd; + tpg = cmd->fu->tpg; + tv_nexus = tpg->tpg_nexus; + dir = get_cmd_dir(cmd->cmd_buf); + if (dir < 0) { + transport_init_se_cmd(se_cmd, + tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo, + tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE, + cmd->prio_attr, cmd->sense_iu.sense); + + transport_send_check_condition_and_sense(se_cmd, + TCM_UNSUPPORTED_SCSI_OPCODE, 1); + usbg_cleanup_cmd(cmd); + return; + } + + target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess, + cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun, + 0, cmd->prio_attr, dir, TARGET_SCF_UNKNOWN_SIZE); +} + +static int usbg_submit_command(struct f_uas *fu, + void *cmdbuf, unsigned int len) +{ + struct command_iu *cmd_iu = cmdbuf; + struct usbg_cmd *cmd; + struct usbg_tpg *tpg; + struct se_cmd *se_cmd; + struct tcm_usbg_nexus *tv_nexus; + u32 cmd_len; + int ret; + + if (cmd_iu->iu_id != IU_ID_COMMAND) { + pr_err("Unsupported type %d\n", cmd_iu->iu_id); + return -EINVAL; + } + + cmd = kzalloc(sizeof *cmd, GFP_ATOMIC); + if (!cmd) + return -ENOMEM; + + cmd->fu = fu; + + /* XXX until I figure out why I can't free in on complete */ + kref_init(&cmd->ref); + kref_get(&cmd->ref); + + tpg = fu->tpg; + cmd_len = (cmd_iu->len & ~0x3) + 16; + if (cmd_len > USBG_MAX_CMD) + goto err; + + memcpy(cmd->cmd_buf, cmd_iu->cdb, cmd_len); + + cmd->tag = be16_to_cpup(&cmd_iu->tag); + if (fu->flags & USBG_USE_STREAMS) { + if (cmd->tag > UASP_SS_EP_COMP_NUM_STREAMS) + goto err; + if (!cmd->tag) + cmd->stream = &fu->stream[0]; + else + cmd->stream = &fu->stream[cmd->tag - 1]; + } else { + cmd->stream = &fu->stream[0]; + } + + tv_nexus = tpg->tpg_nexus; + if (!tv_nexus) { + pr_err("Missing nexus, ignoring command\n"); + goto err; + } + + switch (cmd_iu->prio_attr & 0x7) { + case UAS_HEAD_TAG: + cmd->prio_attr = MSG_HEAD_TAG; + break; + case UAS_ORDERED_TAG: + cmd->prio_attr = MSG_ORDERED_TAG; + break; + case UAS_ACA: + cmd->prio_attr = MSG_ACA_TAG; + break; + default: + pr_debug_once("Unsupported prio_attr: %02x.\n", + cmd_iu->prio_attr); + case UAS_SIMPLE_TAG: + cmd->prio_attr = MSG_SIMPLE_TAG; + break; + } + + se_cmd = &cmd->se_cmd; + cmd->unpacked_lun = scsilun_to_int(&cmd_iu->lun); + + INIT_WORK(&cmd->work, usbg_cmd_work); + ret = queue_work(tpg->workqueue, &cmd->work); + if (ret < 0) + goto err; + + return 0; +err: + kfree(cmd); + return -EINVAL; +} + +static void bot_cmd_work(struct work_struct *work) +{ + struct usbg_cmd *cmd = container_of(work, struct usbg_cmd, work); + struct se_cmd *se_cmd; + struct tcm_usbg_nexus *tv_nexus; + struct usbg_tpg *tpg; + int dir; + + se_cmd = &cmd->se_cmd; + tpg = cmd->fu->tpg; + tv_nexus = tpg->tpg_nexus; + dir = get_cmd_dir(cmd->cmd_buf); + if (dir < 0) { + transport_init_se_cmd(se_cmd, + tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo, + tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE, + cmd->prio_attr, cmd->sense_iu.sense); + + transport_send_check_condition_and_sense(se_cmd, + TCM_UNSUPPORTED_SCSI_OPCODE, 1); + usbg_cleanup_cmd(cmd); + return; + } + + target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess, + cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun, + cmd->data_len, cmd->prio_attr, dir, 0); +} + +static int bot_submit_command(struct f_uas *fu, + void *cmdbuf, unsigned int len) +{ + struct bulk_cb_wrap *cbw = cmdbuf; + struct usbg_cmd *cmd; + struct usbg_tpg *tpg; + struct se_cmd *se_cmd; + struct tcm_usbg_nexus *tv_nexus; + u32 cmd_len; + int ret; + + if (cbw->Signature != cpu_to_le32(US_BULK_CB_SIGN)) { + pr_err("Wrong signature on CBW\n"); + return -EINVAL; + } + if (len != 31) { + pr_err("Wrong length for CBW\n"); + return -EINVAL; + } + + cmd_len = cbw->Length; + if (cmd_len < 1 || cmd_len > 16) + return -EINVAL; + + cmd = kzalloc(sizeof *cmd, GFP_ATOMIC); + if (!cmd) + return -ENOMEM; + + cmd->fu = fu; + + /* XXX until I figure out why I can't free in on complete */ + kref_init(&cmd->ref); + kref_get(&cmd->ref); + + tpg = fu->tpg; + + memcpy(cmd->cmd_buf, cbw->CDB, cmd_len); + + cmd->bot_tag = cbw->Tag; + + tv_nexus = tpg->tpg_nexus; + if (!tv_nexus) { + pr_err("Missing nexus, ignoring command\n"); + goto err; + } + + cmd->prio_attr = MSG_SIMPLE_TAG; + se_cmd = &cmd->se_cmd; + cmd->unpacked_lun = cbw->Lun; + cmd->is_read = cbw->Flags & US_BULK_FLAG_IN ? 1 : 0; + cmd->data_len = le32_to_cpu(cbw->DataTransferLength); + + INIT_WORK(&cmd->work, bot_cmd_work); + ret = queue_work(tpg->workqueue, &cmd->work); + if (ret < 0) + goto err; + + return 0; +err: + kfree(cmd); + return -EINVAL; +} + +/* Start fabric.c code */ + +static int usbg_check_true(struct se_portal_group *se_tpg) +{ + return 1; +} + +static int usbg_check_false(struct se_portal_group *se_tpg) +{ + return 0; +} + +static char *usbg_get_fabric_name(void) +{ + return "usb_gadget"; +} + +static u8 usbg_get_fabric_proto_ident(struct se_portal_group *se_tpg) +{ + struct usbg_tpg *tpg = container_of(se_tpg, + struct usbg_tpg, se_tpg); + struct usbg_tport *tport = tpg->tport; + u8 proto_id; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + default: + proto_id = sas_get_fabric_proto_ident(se_tpg); + break; + } + + return proto_id; +} + +static char *usbg_get_fabric_wwn(struct se_portal_group *se_tpg) +{ + struct usbg_tpg *tpg = container_of(se_tpg, + struct usbg_tpg, se_tpg); + struct usbg_tport *tport = tpg->tport; + + return &tport->tport_name[0]; +} + +static u16 usbg_get_tag(struct se_portal_group *se_tpg) +{ + struct usbg_tpg *tpg = container_of(se_tpg, + struct usbg_tpg, se_tpg); + return tpg->tport_tpgt; +} + +static u32 usbg_get_default_depth(struct se_portal_group *se_tpg) +{ + return 1; +} + +static u32 usbg_get_pr_transport_id( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + struct usbg_tpg *tpg = container_of(se_tpg, + struct usbg_tpg, se_tpg); + struct usbg_tport *tport = tpg->tport; + int ret = 0; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + default: + ret = sas_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); + break; + } + + return ret; +} + +static u32 usbg_get_pr_transport_id_len( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + struct usbg_tpg *tpg = container_of(se_tpg, + struct usbg_tpg, se_tpg); + struct usbg_tport *tport = tpg->tport; + int ret = 0; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + default: + ret = sas_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); + break; + } + + return ret; +} + +static char *usbg_parse_pr_out_transport_id( + struct se_portal_group *se_tpg, + const char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + struct usbg_tpg *tpg = container_of(se_tpg, + struct usbg_tpg, se_tpg); + struct usbg_tport *tport = tpg->tport; + char *tid = NULL; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + default: + tid = sas_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); + } + + return tid; +} + +static struct se_node_acl *usbg_alloc_fabric_acl(struct se_portal_group *se_tpg) +{ + struct usbg_nacl *nacl; + + nacl = kzalloc(sizeof(struct usbg_nacl), GFP_KERNEL); + if (!nacl) { + printk(KERN_ERR "Unable to alocate struct usbg_nacl\n"); + return NULL; + } + + return &nacl->se_node_acl; +} + +static void usbg_release_fabric_acl( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl) +{ + struct usbg_nacl *nacl = container_of(se_nacl, + struct usbg_nacl, se_node_acl); + kfree(nacl); +} + +static u32 usbg_tpg_get_inst_index(struct se_portal_group *se_tpg) +{ + return 1; +} + +static int usbg_new_cmd(struct se_cmd *se_cmd) +{ + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, + se_cmd); + int ret; + + ret = target_setup_cmd_from_cdb(se_cmd, cmd->cmd_buf); + if (ret) + return ret; + + return transport_generic_map_mem_to_cmd(se_cmd, NULL, 0, NULL, 0); +} + +static void usbg_cmd_release(struct kref *ref) +{ + struct usbg_cmd *cmd = container_of(ref, struct usbg_cmd, + ref); + + transport_generic_free_cmd(&cmd->se_cmd, 0); +} + +static void usbg_release_cmd(struct se_cmd *se_cmd) +{ + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, + se_cmd); + kfree(cmd->data_buf); + kfree(cmd); + return; +} + +static int usbg_shutdown_session(struct se_session *se_sess) +{ + return 0; +} + +static void usbg_close_session(struct se_session *se_sess) +{ + return; +} + +static u32 usbg_sess_get_index(struct se_session *se_sess) +{ + return 0; +} + +/* + * XXX Error recovery: return != 0 if we expect writes. Dunno when that could be + */ +static int usbg_write_pending_status(struct se_cmd *se_cmd) +{ + return 0; +} + +static void usbg_set_default_node_attrs(struct se_node_acl *nacl) +{ + return; +} + +static u32 usbg_get_task_tag(struct se_cmd *se_cmd) +{ + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, + se_cmd); + struct f_uas *fu = cmd->fu; + + if (fu->flags & USBG_IS_BOT) + return le32_to_cpu(cmd->bot_tag); + else + return cmd->tag; +} + +static int usbg_get_cmd_state(struct se_cmd *se_cmd) +{ + return 0; +} + +static int usbg_queue_tm_rsp(struct se_cmd *se_cmd) +{ + return 0; +} + +static u16 usbg_set_fabric_sense_len(struct se_cmd *se_cmd, u32 sense_length) +{ + return 0; +} + +static u16 usbg_get_fabric_sense_len(void) +{ + return 0; +} + +static const char *usbg_check_wwn(const char *name) +{ + const char *n; + unsigned int len; + + n = strstr(name, "naa."); + if (!n) + return NULL; + n += 4; + len = strlen(n); + if (len == 0 || len > USBG_NAMELEN - 1) + return NULL; + return n; +} + +static struct se_node_acl *usbg_make_nodeacl( + struct se_portal_group *se_tpg, + struct config_group *group, + const char *name) +{ + struct se_node_acl *se_nacl, *se_nacl_new; + struct usbg_nacl *nacl; + u64 wwpn = 0; + u32 nexus_depth; + const char *wnn_name; + + wnn_name = usbg_check_wwn(name); + if (!wnn_name) + return ERR_PTR(-EINVAL); + se_nacl_new = usbg_alloc_fabric_acl(se_tpg); + if (!(se_nacl_new)) + return ERR_PTR(-ENOMEM); + + nexus_depth = 1; + /* + * se_nacl_new may be released by core_tpg_add_initiator_node_acl() + * when converting a NodeACL from demo mode -> explict + */ + se_nacl = core_tpg_add_initiator_node_acl(se_tpg, se_nacl_new, + name, nexus_depth); + if (IS_ERR(se_nacl)) { + usbg_release_fabric_acl(se_tpg, se_nacl_new); + return se_nacl; + } + /* + * Locate our struct usbg_nacl and set the FC Nport WWPN + */ + nacl = container_of(se_nacl, struct usbg_nacl, se_node_acl); + nacl->iport_wwpn = wwpn; + snprintf(nacl->iport_name, sizeof(nacl->iport_name), "%s", name); + return se_nacl; +} + +static void usbg_drop_nodeacl(struct se_node_acl *se_acl) +{ + struct usbg_nacl *nacl = container_of(se_acl, + struct usbg_nacl, se_node_acl); + core_tpg_del_initiator_node_acl(se_acl->se_tpg, se_acl, 1); + kfree(nacl); +} + +struct usbg_tpg *the_only_tpg_I_currently_have; + +static struct se_portal_group *usbg_make_tpg( + struct se_wwn *wwn, + struct config_group *group, + const char *name) +{ + struct usbg_tport *tport = container_of(wwn, struct usbg_tport, + tport_wwn); + struct usbg_tpg *tpg; + unsigned long tpgt; + int ret; + + if (strstr(name, "tpgt_") != name) + return ERR_PTR(-EINVAL); + if (kstrtoul(name + 5, 0, &tpgt) || tpgt > UINT_MAX) + return ERR_PTR(-EINVAL); + if (the_only_tpg_I_currently_have) { + pr_err("Until the gadget framework can't handle multiple\n"); + pr_err("gadgets, you can't do this here.\n"); + return ERR_PTR(-EBUSY); + } + + tpg = kzalloc(sizeof(struct usbg_tpg), GFP_KERNEL); + if (!tpg) { + printk(KERN_ERR "Unable to allocate struct usbg_tpg"); + return ERR_PTR(-ENOMEM); + } + mutex_init(&tpg->tpg_mutex); + atomic_set(&tpg->tpg_port_count, 0); + tpg->workqueue = alloc_workqueue("tcm_usb_gadget", 0, 1); + if (!tpg->workqueue) { + kfree(tpg); + return NULL; + } + + tpg->tport = tport; + tpg->tport_tpgt = tpgt; + + ret = core_tpg_register(&usbg_fabric_configfs->tf_ops, wwn, + &tpg->se_tpg, tpg, + TRANSPORT_TPG_TYPE_NORMAL); + if (ret < 0) { + destroy_workqueue(tpg->workqueue); + kfree(tpg); + return NULL; + } + the_only_tpg_I_currently_have = tpg; + return &tpg->se_tpg; +} + +static void usbg_drop_tpg(struct se_portal_group *se_tpg) +{ + struct usbg_tpg *tpg = container_of(se_tpg, + struct usbg_tpg, se_tpg); + + core_tpg_deregister(se_tpg); + destroy_workqueue(tpg->workqueue); + kfree(tpg); + the_only_tpg_I_currently_have = NULL; +} + +static struct se_wwn *usbg_make_tport( + struct target_fabric_configfs *tf, + struct config_group *group, + const char *name) +{ + struct usbg_tport *tport; + const char *wnn_name; + u64 wwpn = 0; + + wnn_name = usbg_check_wwn(name); + if (!wnn_name) + return ERR_PTR(-EINVAL); + + tport = kzalloc(sizeof(struct usbg_tport), GFP_KERNEL); + if (!(tport)) { + printk(KERN_ERR "Unable to allocate struct usbg_tport"); + return ERR_PTR(-ENOMEM); + } + tport->tport_wwpn = wwpn; + snprintf(tport->tport_name, sizeof(tport->tport_name), wnn_name); + return &tport->tport_wwn; +} + +static void usbg_drop_tport(struct se_wwn *wwn) +{ + struct usbg_tport *tport = container_of(wwn, + struct usbg_tport, tport_wwn); + kfree(tport); +} + +/* + * If somebody feels like dropping the version property, go ahead. + */ +static ssize_t usbg_wwn_show_attr_version( + struct target_fabric_configfs *tf, + char *page) +{ + return sprintf(page, "usb-gadget fabric module\n"); +} +TF_WWN_ATTR_RO(usbg, version); + +static struct configfs_attribute *usbg_wwn_attrs[] = { + &usbg_wwn_version.attr, + NULL, +}; + +static ssize_t tcm_usbg_tpg_show_enable( + struct se_portal_group *se_tpg, + char *page) +{ + struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); + + return snprintf(page, PAGE_SIZE, "%u\n", tpg->gadget_connect); +} + +static int usbg_attach(struct usbg_tpg *); +static void usbg_detach(struct usbg_tpg *); + +static ssize_t tcm_usbg_tpg_store_enable( + struct se_portal_group *se_tpg, + const char *page, + size_t count) +{ + struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); + unsigned long op; + ssize_t ret; + + ret = kstrtoul(page, 0, &op); + if (ret < 0) + return -EINVAL; + if (op > 1) + return -EINVAL; + + if (op && tpg->gadget_connect) + goto out; + if (!op && !tpg->gadget_connect) + goto out; + + if (op) { + ret = usbg_attach(tpg); + if (ret) + goto out; + } else { + usbg_detach(tpg); + } + tpg->gadget_connect = op; +out: + return count; +} +TF_TPG_BASE_ATTR(tcm_usbg, enable, S_IRUGO | S_IWUSR); + +static ssize_t tcm_usbg_tpg_show_nexus( + struct se_portal_group *se_tpg, + char *page) +{ + struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); + struct tcm_usbg_nexus *tv_nexus; + ssize_t ret; + + mutex_lock(&tpg->tpg_mutex); + tv_nexus = tpg->tpg_nexus; + if (!tv_nexus) { + ret = -ENODEV; + goto out; + } + ret = snprintf(page, PAGE_SIZE, "%s\n", + tv_nexus->tvn_se_sess->se_node_acl->initiatorname); +out: + mutex_unlock(&tpg->tpg_mutex); + return ret; +} + +static int tcm_usbg_make_nexus(struct usbg_tpg *tpg, char *name) +{ + struct se_portal_group *se_tpg; + struct tcm_usbg_nexus *tv_nexus; + int ret; + + mutex_lock(&tpg->tpg_mutex); + if (tpg->tpg_nexus) { + ret = -EEXIST; + pr_debug("tpg->tpg_nexus already exists\n"); + goto err_unlock; + } + se_tpg = &tpg->se_tpg; + + ret = -ENOMEM; + tv_nexus = kzalloc(sizeof(*tv_nexus), GFP_KERNEL); + if (!tv_nexus) { + pr_err("Unable to allocate struct tcm_vhost_nexus\n"); + goto err_unlock; + } + tv_nexus->tvn_se_sess = transport_init_session(); + if (IS_ERR(tv_nexus->tvn_se_sess)) + goto err_free; + + /* + * Since we are running in 'demo mode' this call with generate a + * struct se_node_acl for the tcm_vhost struct se_portal_group with + * the SCSI Initiator port name of the passed configfs group 'name'. + */ + tv_nexus->tvn_se_sess->se_node_acl = core_tpg_check_initiator_node_acl( + se_tpg, name); + if (!tv_nexus->tvn_se_sess->se_node_acl) { + pr_debug("core_tpg_check_initiator_node_acl() failed" + " for %s\n", name); + goto err_session; + } + /* + * Now register the TCM vHost virtual I_T Nexus as active with the + * call to __transport_register_session() + */ + __transport_register_session(se_tpg, tv_nexus->tvn_se_sess->se_node_acl, + tv_nexus->tvn_se_sess, tv_nexus); + tpg->tpg_nexus = tv_nexus; + mutex_unlock(&tpg->tpg_mutex); + return 0; + +err_session: + transport_free_session(tv_nexus->tvn_se_sess); +err_free: + kfree(tv_nexus); +err_unlock: + mutex_unlock(&tpg->tpg_mutex); + return ret; +} + +static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg) +{ + struct se_session *se_sess; + struct tcm_usbg_nexus *tv_nexus; + int ret = -ENODEV; + + mutex_lock(&tpg->tpg_mutex); + tv_nexus = tpg->tpg_nexus; + if (!tv_nexus) + goto out; + + se_sess = tv_nexus->tvn_se_sess; + if (!se_sess) + goto out; + + if (atomic_read(&tpg->tpg_port_count)) { + ret = -EPERM; + pr_err("Unable to remove Host I_T Nexus with" + " active TPG port count: %d\n", + atomic_read(&tpg->tpg_port_count)); + goto out; + } + + pr_debug("Removing I_T Nexus to Initiator Port: %s\n", + tv_nexus->tvn_se_sess->se_node_acl->initiatorname); + /* + * Release the SCSI I_T Nexus to the emulated vHost Target Port + */ + transport_deregister_session(tv_nexus->tvn_se_sess); + tpg->tpg_nexus = NULL; + + kfree(tv_nexus); +out: + mutex_unlock(&tpg->tpg_mutex); + return 0; +} + +static ssize_t tcm_usbg_tpg_store_nexus( + struct se_portal_group *se_tpg, + const char *page, + size_t count) +{ + struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); + unsigned char i_port[USBG_NAMELEN], *ptr; + int ret; + + if (!strncmp(page, "NULL", 4)) { + ret = tcm_usbg_drop_nexus(tpg); + return (!ret) ? count : ret; + } + if (strlen(page) > USBG_NAMELEN) { + pr_err("Emulated NAA Sas Address: %s, exceeds" + " max: %d\n", page, USBG_NAMELEN); + return -EINVAL; + } + snprintf(i_port, USBG_NAMELEN, "%s", page); + + ptr = strstr(i_port, "naa."); + if (!ptr) { + pr_err("Missing 'naa.' prefix\n"); + return -EINVAL; + } + + if (i_port[strlen(i_port) - 1] == '\n') + i_port[strlen(i_port) - 1] = '\0'; + + ret = tcm_usbg_make_nexus(tpg, &i_port[4]); + if (ret < 0) + return ret; + return count; +} +TF_TPG_BASE_ATTR(tcm_usbg, nexus, S_IRUGO | S_IWUSR); + +static struct configfs_attribute *usbg_base_attrs[] = { + &tcm_usbg_tpg_enable.attr, + &tcm_usbg_tpg_nexus.attr, + NULL, +}; + +static int usbg_port_link(struct se_portal_group *se_tpg, struct se_lun *lun) +{ + struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); + + atomic_inc(&tpg->tpg_port_count); + smp_mb__after_atomic_inc(); + return 0; +} + +static void usbg_port_unlink(struct se_portal_group *se_tpg, + struct se_lun *se_lun) +{ + struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); + + atomic_dec(&tpg->tpg_port_count); + smp_mb__after_atomic_dec(); +} + +static int usbg_check_stop_free(struct se_cmd *se_cmd) +{ + struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd, + se_cmd); + + kref_put(&cmd->ref, usbg_cmd_release); + return 1; +} + +static struct target_core_fabric_ops usbg_ops = { + .get_fabric_name = usbg_get_fabric_name, + .get_fabric_proto_ident = usbg_get_fabric_proto_ident, + .tpg_get_wwn = usbg_get_fabric_wwn, + .tpg_get_tag = usbg_get_tag, + .tpg_get_default_depth = usbg_get_default_depth, + .tpg_get_pr_transport_id = usbg_get_pr_transport_id, + .tpg_get_pr_transport_id_len = usbg_get_pr_transport_id_len, + .tpg_parse_pr_out_transport_id = usbg_parse_pr_out_transport_id, + .tpg_check_demo_mode = usbg_check_true, + .tpg_check_demo_mode_cache = usbg_check_false, + .tpg_check_demo_mode_write_protect = usbg_check_false, + .tpg_check_prod_mode_write_protect = usbg_check_false, + .tpg_alloc_fabric_acl = usbg_alloc_fabric_acl, + .tpg_release_fabric_acl = usbg_release_fabric_acl, + .tpg_get_inst_index = usbg_tpg_get_inst_index, + .new_cmd_map = usbg_new_cmd, + .release_cmd = usbg_release_cmd, + .shutdown_session = usbg_shutdown_session, + .close_session = usbg_close_session, + .sess_get_index = usbg_sess_get_index, + .sess_get_initiator_sid = NULL, + .write_pending = usbg_send_write_request, + .write_pending_status = usbg_write_pending_status, + .set_default_node_attributes = usbg_set_default_node_attrs, + .get_task_tag = usbg_get_task_tag, + .get_cmd_state = usbg_get_cmd_state, + .queue_data_in = usbg_send_read_response, + .queue_status = usbg_send_status_response, + .queue_tm_rsp = usbg_queue_tm_rsp, + .get_fabric_sense_len = usbg_get_fabric_sense_len, + .set_fabric_sense_len = usbg_set_fabric_sense_len, + .check_stop_free = usbg_check_stop_free, + + .fabric_make_wwn = usbg_make_tport, + .fabric_drop_wwn = usbg_drop_tport, + .fabric_make_tpg = usbg_make_tpg, + .fabric_drop_tpg = usbg_drop_tpg, + .fabric_post_link = usbg_port_link, + .fabric_pre_unlink = usbg_port_unlink, + .fabric_make_np = NULL, + .fabric_drop_np = NULL, + .fabric_make_nodeacl = usbg_make_nodeacl, + .fabric_drop_nodeacl = usbg_drop_nodeacl, +}; + +static int usbg_register_configfs(void) +{ + struct target_fabric_configfs *fabric; + int ret; + + fabric = target_fabric_configfs_init(THIS_MODULE, "usb_gadget"); + if (IS_ERR(fabric)) { + printk(KERN_ERR "target_fabric_configfs_init() failed\n"); + return PTR_ERR(fabric); + } + + fabric->tf_ops = usbg_ops; + TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = usbg_wwn_attrs; + TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = usbg_base_attrs; + TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL; + ret = target_fabric_configfs_register(fabric); + if (ret < 0) { + printk(KERN_ERR "target_fabric_configfs_register() failed" + " for usb-gadget\n"); + return ret; + } + usbg_fabric_configfs = fabric; + return 0; +}; + +static void usbg_deregister_configfs(void) +{ + if (!(usbg_fabric_configfs)) + return; + + target_fabric_configfs_deregister(usbg_fabric_configfs); + usbg_fabric_configfs = NULL; +}; + +/* Start gadget.c code */ + +static struct usb_interface_descriptor bot_intf_desc = { + .bLength = sizeof(bot_intf_desc), + .bDescriptorType = USB_DT_INTERFACE, + .bAlternateSetting = 0, + .bNumEndpoints = 2, + .bAlternateSetting = USB_G_ALT_INT_BBB, + .bInterfaceClass = USB_CLASS_MASS_STORAGE, + .bInterfaceSubClass = USB_SC_SCSI, + .bInterfaceProtocol = USB_PR_BULK, + .iInterface = USB_G_STR_INT_UAS, +}; + +static struct usb_interface_descriptor uasp_intf_desc = { + .bLength = sizeof(uasp_intf_desc), + .bDescriptorType = USB_DT_INTERFACE, + .bNumEndpoints = 4, + .bAlternateSetting = USB_G_ALT_INT_UAS, + .bInterfaceClass = USB_CLASS_MASS_STORAGE, + .bInterfaceSubClass = USB_SC_SCSI, + .bInterfaceProtocol = USB_PR_UAS, + .iInterface = USB_G_STR_INT_BBB, +}; + +static struct usb_endpoint_descriptor uasp_bi_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor uasp_fs_bi_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_pipe_usage_descriptor uasp_bi_pipe_desc = { + .bLength = sizeof(uasp_bi_pipe_desc), + .bDescriptorType = USB_DT_PIPE_USAGE, + .bPipeID = DATA_IN_PIPE_ID, +}; + +static struct usb_endpoint_descriptor uasp_ss_bi_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor uasp_bi_ep_comp_desc = { + .bLength = sizeof(uasp_bi_ep_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, + .bmAttributes = UASP_SS_EP_COMP_LOG_STREAMS, + .wBytesPerInterval = 0, +}; + +static struct usb_ss_ep_comp_descriptor bot_bi_ep_comp_desc = { + .bLength = sizeof(bot_bi_ep_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, +}; + +static struct usb_endpoint_descriptor uasp_bo_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor uasp_fs_bo_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_pipe_usage_descriptor uasp_bo_pipe_desc = { + .bLength = sizeof(uasp_bo_pipe_desc), + .bDescriptorType = USB_DT_PIPE_USAGE, + .bPipeID = DATA_OUT_PIPE_ID, +}; + +static struct usb_endpoint_descriptor uasp_ss_bo_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(0x400), +}; + +static struct usb_ss_ep_comp_descriptor uasp_bo_ep_comp_desc = { + .bLength = sizeof(uasp_bo_ep_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bmAttributes = UASP_SS_EP_COMP_LOG_STREAMS, +}; + +static struct usb_ss_ep_comp_descriptor bot_bo_ep_comp_desc = { + .bLength = sizeof(bot_bo_ep_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_endpoint_descriptor uasp_status_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor uasp_fs_status_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_pipe_usage_descriptor uasp_status_pipe_desc = { + .bLength = sizeof(uasp_status_pipe_desc), + .bDescriptorType = USB_DT_PIPE_USAGE, + .bPipeID = STATUS_PIPE_ID, +}; + +static struct usb_endpoint_descriptor uasp_ss_status_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor uasp_status_in_ep_comp_desc = { + .bLength = sizeof(uasp_status_in_ep_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bmAttributes = UASP_SS_EP_COMP_LOG_STREAMS, +}; + +static struct usb_endpoint_descriptor uasp_cmd_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor uasp_fs_cmd_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_pipe_usage_descriptor uasp_cmd_pipe_desc = { + .bLength = sizeof(uasp_cmd_pipe_desc), + .bDescriptorType = USB_DT_PIPE_USAGE, + .bPipeID = CMD_PIPE_ID, +}; + +static struct usb_endpoint_descriptor uasp_ss_cmd_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor uasp_cmd_comp_desc = { + .bLength = sizeof(uasp_cmd_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_descriptor_header *uasp_fs_function_desc[] = { + (struct usb_descriptor_header *) &bot_intf_desc, + (struct usb_descriptor_header *) &uasp_fs_bi_desc, + (struct usb_descriptor_header *) &uasp_fs_bo_desc, + + (struct usb_descriptor_header *) &uasp_intf_desc, + (struct usb_descriptor_header *) &uasp_fs_bi_desc, + (struct usb_descriptor_header *) &uasp_bi_pipe_desc, + (struct usb_descriptor_header *) &uasp_fs_bo_desc, + (struct usb_descriptor_header *) &uasp_bo_pipe_desc, + (struct usb_descriptor_header *) &uasp_fs_status_desc, + (struct usb_descriptor_header *) &uasp_status_pipe_desc, + (struct usb_descriptor_header *) &uasp_fs_cmd_desc, + (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, +}; + +static struct usb_descriptor_header *uasp_hs_function_desc[] = { + (struct usb_descriptor_header *) &bot_intf_desc, + (struct usb_descriptor_header *) &uasp_bi_desc, + (struct usb_descriptor_header *) &uasp_bo_desc, + + (struct usb_descriptor_header *) &uasp_intf_desc, + (struct usb_descriptor_header *) &uasp_bi_desc, + (struct usb_descriptor_header *) &uasp_bi_pipe_desc, + (struct usb_descriptor_header *) &uasp_bo_desc, + (struct usb_descriptor_header *) &uasp_bo_pipe_desc, + (struct usb_descriptor_header *) &uasp_status_desc, + (struct usb_descriptor_header *) &uasp_status_pipe_desc, + (struct usb_descriptor_header *) &uasp_cmd_desc, + (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, + NULL, +}; + +static struct usb_descriptor_header *uasp_ss_function_desc[] = { + (struct usb_descriptor_header *) &bot_intf_desc, + (struct usb_descriptor_header *) &uasp_ss_bi_desc, + (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, + (struct usb_descriptor_header *) &uasp_ss_bo_desc, + (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, + + (struct usb_descriptor_header *) &uasp_intf_desc, + (struct usb_descriptor_header *) &uasp_ss_bi_desc, + (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, + (struct usb_descriptor_header *) &uasp_bi_pipe_desc, + (struct usb_descriptor_header *) &uasp_ss_bo_desc, + (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, + (struct usb_descriptor_header *) &uasp_bo_pipe_desc, + (struct usb_descriptor_header *) &uasp_ss_status_desc, + (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, + (struct usb_descriptor_header *) &uasp_status_pipe_desc, + (struct usb_descriptor_header *) &uasp_ss_cmd_desc, + (struct usb_descriptor_header *) &uasp_cmd_comp_desc, + (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, + NULL, +}; + +#define UAS_VENDOR_ID 0x0525 /* NetChip */ +#define UAS_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ + +static struct usb_device_descriptor usbg_device_desc = { + .bLength = sizeof(usbg_device_desc), + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_PER_INTERFACE, + .idVendor = cpu_to_le16(UAS_VENDOR_ID), + .idProduct = cpu_to_le16(UAS_PRODUCT_ID), + .iManufacturer = USB_G_STR_MANUFACTOR, + .iProduct = USB_G_STR_PRODUCT, + .iSerialNumber = USB_G_STR_SERIAL, + + .bNumConfigurations = 1, +}; + +static struct usb_string usbg_us_strings[] = { + { USB_G_STR_MANUFACTOR, "Target Manufactor"}, + { USB_G_STR_PRODUCT, "Target Product"}, + { USB_G_STR_SERIAL, "000000000001"}, + { USB_G_STR_CONFIG, "default config"}, + { USB_G_STR_INT_UAS, "USB Attached SCSI"}, + { USB_G_STR_INT_BBB, "Bulk Only Transport"}, + { }, +}; + +static struct usb_gadget_strings usbg_stringtab = { + .language = 0x0409, + .strings = usbg_us_strings, +}; + +static struct usb_gadget_strings *usbg_strings[] = { + &usbg_stringtab, + NULL, +}; + +static int guas_unbind(struct usb_composite_dev *cdev) +{ + return 0; +} + +static struct usb_configuration usbg_config_driver = { + .label = "Linux Target", + .bConfigurationValue = 1, + .iConfiguration = USB_G_STR_CONFIG, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, +}; + +static void give_back_ep(struct usb_ep **pep) +{ + struct usb_ep *ep = *pep; + if (!ep) + return; + ep->driver_data = NULL; +} + +static int usbg_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_uas *fu = to_f_uas(f); + struct usb_gadget *gadget = c->cdev->gadget; + struct usb_ep *ep; + int iface; + + iface = usb_interface_id(c, f); + if (iface < 0) + return iface; + + bot_intf_desc.bInterfaceNumber = iface; + uasp_intf_desc.bInterfaceNumber = iface; + fu->iface = iface; + ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bi_desc, + &uasp_bi_ep_comp_desc); + if (!ep) + goto ep_fail; + + ep->driver_data = fu; + fu->ep_in = ep; + + ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bo_desc, + &uasp_bo_ep_comp_desc); + if (!ep) + goto ep_fail; + ep->driver_data = fu; + fu->ep_out = ep; + + ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_status_desc, + &uasp_status_in_ep_comp_desc); + if (!ep) + goto ep_fail; + ep->driver_data = fu; + fu->ep_status = ep; + + ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_cmd_desc, + &uasp_cmd_comp_desc); + if (!ep) + goto ep_fail; + ep->driver_data = fu; + fu->ep_cmd = ep; + + /* Assume endpoint addresses are the same for both speeds */ + uasp_bi_desc.bEndpointAddress = uasp_ss_bi_desc.bEndpointAddress; + uasp_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress; + uasp_status_desc.bEndpointAddress = + uasp_ss_status_desc.bEndpointAddress; + uasp_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress; + + uasp_fs_bi_desc.bEndpointAddress = uasp_ss_bi_desc.bEndpointAddress; + uasp_fs_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress; + uasp_fs_status_desc.bEndpointAddress = + uasp_ss_status_desc.bEndpointAddress; + uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress; + + return 0; +ep_fail: + pr_err("Can't claim all required eps\n"); + + give_back_ep(&fu->ep_in); + give_back_ep(&fu->ep_out); + give_back_ep(&fu->ep_status); + give_back_ep(&fu->ep_cmd); + return -ENOTSUPP; +} + +static void usbg_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_uas *fu = to_f_uas(f); + + kfree(fu); +} + +struct guas_setup_wq { + struct work_struct work; + struct f_uas *fu; + unsigned int alt; +}; + +static void usbg_delayed_set_alt(struct work_struct *wq) +{ + struct guas_setup_wq *work = container_of(wq, struct guas_setup_wq, + work); + struct f_uas *fu = work->fu; + int alt = work->alt; + + kfree(work); + + if (fu->flags & USBG_IS_BOT) + bot_cleanup_old_alt(fu); + if (fu->flags & USBG_IS_UAS) + uasp_cleanup_old_alt(fu); + + if (alt == USB_G_ALT_INT_BBB) + bot_set_alt(fu); + else if (alt == USB_G_ALT_INT_UAS) + uasp_set_alt(fu); + usb_composite_setup_continue(fu->function.config->cdev); +} + +static int usbg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_uas *fu = to_f_uas(f); + + if ((alt == USB_G_ALT_INT_BBB) || (alt == USB_G_ALT_INT_UAS)) { + struct guas_setup_wq *work; + + work = kmalloc(sizeof(*work), GFP_ATOMIC); + if (!work) + return -ENOMEM; + INIT_WORK(&work->work, usbg_delayed_set_alt); + work->fu = fu; + work->alt = alt; + schedule_work(&work->work); + return USB_GADGET_DELAYED_STATUS; + } + return -EOPNOTSUPP; +} + +static void usbg_disable(struct usb_function *f) +{ + struct f_uas *fu = to_f_uas(f); + + if (fu->flags & USBG_IS_UAS) + uasp_cleanup_old_alt(fu); + else if (fu->flags & USBG_IS_BOT) + bot_cleanup_old_alt(fu); + fu->flags = 0; +} + +static int usbg_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct f_uas *fu = to_f_uas(f); + + if (!(fu->flags & USBG_IS_BOT)) + return -EOPNOTSUPP; + + return usbg_bot_setup(f, ctrl); +} + +static int usbg_cfg_bind(struct usb_configuration *c) +{ + struct f_uas *fu; + int ret; + + fu = kzalloc(sizeof(*fu), GFP_KERNEL); + if (!fu) + return -ENOMEM; + fu->function.name = "Target Function"; + fu->function.descriptors = uasp_fs_function_desc; + fu->function.hs_descriptors = uasp_hs_function_desc; + fu->function.ss_descriptors = uasp_ss_function_desc; + fu->function.bind = usbg_bind; + fu->function.unbind = usbg_unbind; + fu->function.set_alt = usbg_set_alt; + fu->function.setup = usbg_setup; + fu->function.disable = usbg_disable; + fu->tpg = the_only_tpg_I_currently_have; + + ret = usb_add_function(c, &fu->function); + if (ret) + goto err; + + return 0; +err: + kfree(fu); + return ret; +} + +static int usb_target_bind(struct usb_composite_dev *cdev) +{ + int ret; + + ret = usb_add_config(cdev, &usbg_config_driver, + usbg_cfg_bind); + return 0; +} + +static struct usb_composite_driver usbg_driver = { + .name = "g_target", + .dev = &usbg_device_desc, + .strings = usbg_strings, + .max_speed = USB_SPEED_SUPER, + .unbind = guas_unbind, +}; + +static int usbg_attach(struct usbg_tpg *tpg) +{ + return usb_composite_probe(&usbg_driver, usb_target_bind); +} + +static void usbg_detach(struct usbg_tpg *tpg) +{ + usb_composite_unregister(&usbg_driver); +} + +static int __init usb_target_gadget_init(void) +{ + int ret; + + ret = usbg_register_configfs(); + return ret; +} +module_init(usb_target_gadget_init); + +static void __exit usb_target_gadget_exit(void) +{ + usbg_deregister_configfs(); +} +module_exit(usb_target_gadget_exit); + +MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); +MODULE_DESCRIPTION("usb-gadget fabric"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h new file mode 100644 index 000000000000..bb18999a9a8d --- /dev/null +++ b/drivers/usb/gadget/tcm_usb_gadget.h @@ -0,0 +1,146 @@ +#ifndef __TARGET_USB_GADGET_H__ +#define __TARGET_USB_GADGET_H__ + +#include <linux/kref.h> +/* #include <linux/usb/uas.h> */ +#include <linux/usb/composite.h> +#include <linux/usb/uas.h> +#include <linux/usb/storage.h> +#include <scsi/scsi.h> +#include <target/target_core_base.h> +#include <target/target_core_fabric.h> + +#define USBG_NAMELEN 32 + +#define fuas_to_gadget(f) (f->function.config->cdev->gadget) +#define UASP_SS_EP_COMP_LOG_STREAMS 4 +#define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS) + +#define USB_G_STR_MANUFACTOR 1 +#define USB_G_STR_PRODUCT 2 +#define USB_G_STR_SERIAL 3 +#define USB_G_STR_CONFIG 4 +#define USB_G_STR_INT_UAS 5 +#define USB_G_STR_INT_BBB 6 + +#define USB_G_ALT_INT_BBB 0 +#define USB_G_ALT_INT_UAS 1 + +struct usbg_nacl { + /* Binary World Wide unique Port Name for SAS Initiator port */ + u64 iport_wwpn; + /* ASCII formatted WWPN for Sas Initiator port */ + char iport_name[USBG_NAMELEN]; + /* Returned by usbg_make_nodeacl() */ + struct se_node_acl se_node_acl; +}; + +struct tcm_usbg_nexus { + struct se_session *tvn_se_sess; +}; + +struct usbg_tpg { + struct mutex tpg_mutex; + /* SAS port target portal group tag for TCM */ + u16 tport_tpgt; + /* Pointer back to usbg_tport */ + struct usbg_tport *tport; + struct workqueue_struct *workqueue; + /* Returned by usbg_make_tpg() */ + struct se_portal_group se_tpg; + u32 gadget_connect; + struct tcm_usbg_nexus *tpg_nexus; + atomic_t tpg_port_count; +}; + +struct usbg_tport { + /* SCSI protocol the tport is providing */ + u8 tport_proto_id; + /* Binary World Wide unique Port Name for SAS Target port */ + u64 tport_wwpn; + /* ASCII formatted WWPN for SAS Target port */ + char tport_name[USBG_NAMELEN]; + /* Returned by usbg_make_tport() */ + struct se_wwn tport_wwn; +}; + +enum uas_state { + UASP_SEND_DATA, + UASP_RECEIVE_DATA, + UASP_SEND_STATUS, + UASP_QUEUE_COMMAND, +}; + +#define USBG_MAX_CMD 64 +struct usbg_cmd { + /* common */ + u8 cmd_buf[USBG_MAX_CMD]; + u32 data_len; + struct work_struct work; + int unpacked_lun; + struct se_cmd se_cmd; + void *data_buf; /* used if no sg support available */ + struct f_uas *fu; + struct completion write_complete; + struct kref ref; + + /* UAS only */ + u16 tag; + u16 prio_attr; + struct sense_iu sense_iu; + enum uas_state state; + struct uas_stream *stream; + + /* BOT only */ + __le32 bot_tag; + unsigned int csw_code; + unsigned is_read:1; + +}; + +struct uas_stream { + struct usb_request *req_in; + struct usb_request *req_out; + struct usb_request *req_status; +}; + +struct usbg_cdb { + struct usb_request *req; + void *buf; +}; + +struct bot_status { + struct usb_request *req; + struct bulk_cs_wrap csw; +}; + +struct f_uas { + struct usbg_tpg *tpg; + struct usb_function function; + u16 iface; + + u32 flags; +#define USBG_ENABLED (1 << 0) +#define USBG_IS_UAS (1 << 1) +#define USBG_USE_STREAMS (1 << 2) +#define USBG_IS_BOT (1 << 3) +#define USBG_BOT_CMD_PEND (1 << 4) + + struct usbg_cdb cmd; + struct usb_ep *ep_in; + struct usb_ep *ep_out; + + /* UAS */ + struct usb_ep *ep_status; + struct usb_ep *ep_cmd; + struct uas_stream stream[UASP_SS_EP_COMP_NUM_STREAMS]; + + /* BOT */ + struct bot_status bot_status; + struct usb_request *bot_req_in; + struct usb_request *bot_req_out; +}; + +extern struct usbg_tpg *the_only_tpg_I_currently_have; + +#endif diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 29c854bbca44..47cf48b51c9d 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -744,10 +744,11 @@ static struct device_type gadget_type = { }; /** - * gether_setup - initialize one ethernet-over-usb link + * gether_setup_name - initialize one ethernet-over-usb link * @g: gadget to associated with these links * @ethaddr: NULL, or a buffer in which the ethernet address of the * host side of the link is recorded + * @netname: name for network device (for example, "usb") * Context: may sleep * * This sets up the single network link that may be exported by a @@ -756,7 +757,8 @@ static struct device_type gadget_type = { * * Returns negative errno, or zero on success */ -int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) +int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], + const char *netname) { struct eth_dev *dev; struct net_device *net; @@ -780,7 +782,7 @@ int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) /* network device setup */ dev->net = net; - strcpy(net->name, "usb%d"); + snprintf(net->name, sizeof(net->name), "%s%%d", netname); if (get_ether_addr(dev_addr, net->dev_addr)) dev_warn(&g->dev, diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index 8012357e98aa..6f4a1623d854 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -69,9 +69,28 @@ struct gether { |USB_CDC_PACKET_TYPE_PROMISCUOUS \ |USB_CDC_PACKET_TYPE_DIRECTED) +/* variant of gether_setup that allows customizing network device name */ +int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], + const char *netname); /* netdev setup/teardown as directed by the gadget driver */ -int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]); +/* gether_setup - initialize one ethernet-over-usb link + * @g: gadget to associated with these links + * @ethaddr: NULL, or a buffer in which the ethernet address of the + * host side of the link is recorded + * Context: may sleep + * + * This sets up the single network link that may be exported by a + * gadget driver using this framework. The link layer addresses are + * set up using module parameters. + * + * Returns negative errno, or zero on success + */ +static inline int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) +{ + return gether_setup_name(g, ethaddr, "usb"); +} + void gether_cleanup(void); /* connect/disconnect is handled by individual functions */ @@ -99,16 +118,37 @@ int eem_bind_config(struct usb_configuration *c); #ifdef USB_ETH_RNDIS -int rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); +int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + u32 vendorID, const char *manufacturer); #else static inline int -rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) +rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + u32 vendorID, const char *manufacturer) { return 0; } #endif +/** + * rndis_bind_config - add RNDIS network link to a configuration + * @c: the configuration to support the network link + * @ethaddr: a buffer in which the ethernet address of the host side + * side of the link was recorded + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + * + * Caller must have called @gether_setup(). Caller is also responsible + * for calling @gether_cleanup() before module unload. + */ +static inline int rndis_bind_config(struct usb_configuration *c, + u8 ethaddr[ETH_ALEN]) +{ + return rndis_bind_config_vendor(c, ethaddr, 0, NULL); +} + + #endif /* __U_ETHER_H */ diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 6c23938d2711..5b3f5fffea92 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -94,17 +94,14 @@ struct gs_buf { * (and thus for each /dev/ node). */ struct gs_port { + struct tty_port port; spinlock_t port_lock; /* guard port_* access */ struct gserial *port_usb; - struct tty_struct *port_tty; - unsigned open_count; bool openclose; /* open/close in progress */ u8 port_num; - wait_queue_head_t close_wait; /* wait for last close */ - struct list_head read_pool; int read_started; int read_allocated; @@ -412,8 +409,8 @@ __acquires(&port->port_lock) break; } - if (do_tty_wake && port->port_tty) - tty_wakeup(port->port_tty); + if (do_tty_wake && port->port.tty) + tty_wakeup(port->port.tty); return status; } @@ -435,7 +432,7 @@ __acquires(&port->port_lock) struct tty_struct *tty; /* no more rx if closed */ - tty = port->port_tty; + tty = port->port.tty; if (!tty) break; @@ -488,7 +485,7 @@ static void gs_rx_push(unsigned long _port) /* hand any queued data to the tty */ spin_lock_irq(&port->port_lock); - tty = port->port_tty; + tty = port->port.tty; while (!list_empty(queue)) { struct usb_request *req; @@ -699,7 +696,7 @@ static int gs_start_io(struct gs_port *port) /* unblock any pending writes into our circular buffer */ if (started) { - tty_wakeup(port->port_tty); + tty_wakeup(port->port.tty); } else { gs_free_requests(ep, head, &port->read_allocated); gs_free_requests(port->port_usb->in, &port->write_pool, @@ -734,9 +731,9 @@ static int gs_open(struct tty_struct *tty, struct file *file) spin_lock_irq(&port->port_lock); /* already open? Great. */ - if (port->open_count) { + if (port->port.count) { status = 0; - port->open_count++; + port->port.count++; /* currently opening/closing? wait ... */ } else if (port->openclose) { @@ -793,9 +790,9 @@ static int gs_open(struct tty_struct *tty, struct file *file) /* REVISIT maybe wait for "carrier detect" */ tty->driver_data = port; - port->port_tty = tty; + port->port.tty = tty; - port->open_count = 1; + port->port.count = 1; port->openclose = false; /* if connected, start the I/O stream */ @@ -837,11 +834,11 @@ static void gs_close(struct tty_struct *tty, struct file *file) spin_lock_irq(&port->port_lock); - if (port->open_count != 1) { - if (port->open_count == 0) + if (port->port.count != 1) { + if (port->port.count == 0) WARN_ON(1); else - --port->open_count; + --port->port.count; goto exit; } @@ -851,7 +848,7 @@ static void gs_close(struct tty_struct *tty, struct file *file) * and sleep if necessary */ port->openclose = true; - port->open_count = 0; + port->port.count = 0; gser = port->port_usb; if (gser && gser->disconnect) @@ -879,14 +876,14 @@ static void gs_close(struct tty_struct *tty, struct file *file) gs_buf_clear(&port->port_write_buf); tty->driver_data = NULL; - port->port_tty = NULL; + port->port.tty = NULL; port->openclose = false; pr_debug("gs_close: ttyGS%d (%p,%p) done!\n", port->port_num, tty, file); - wake_up_interruptible(&port->close_wait); + wake_up_interruptible(&port->port.close_wait); exit: spin_unlock_irq(&port->port_lock); } @@ -917,7 +914,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch) unsigned long flags; int status; - pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %p\n", + pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n", port->port_num, tty, ch, __builtin_return_address(0)); spin_lock_irqsave(&port->port_lock, flags); @@ -1025,7 +1022,7 @@ static const struct tty_operations gs_tty_ops = { static struct tty_driver *gs_tty_driver; -static int __init +static int gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) { struct gs_port *port; @@ -1034,8 +1031,8 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) if (port == NULL) return -ENOMEM; + tty_port_init(&port->port); spin_lock_init(&port->port_lock); - init_waitqueue_head(&port->close_wait); init_waitqueue_head(&port->drain_wait); tasklet_init(&port->push, gs_rx_push, (unsigned long) port); @@ -1071,7 +1068,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) * * Returns negative errno or zero. */ -int __init gserial_setup(struct usb_gadget *g, unsigned count) +int gserial_setup(struct usb_gadget *g, unsigned count) { unsigned i; struct usb_cdc_line_coding coding; @@ -1155,7 +1152,7 @@ static int gs_closed(struct gs_port *port) int cond; spin_lock_irq(&port->port_lock); - cond = (port->open_count == 0) && !port->openclose; + cond = (port->port.count == 0) && !port->openclose; spin_unlock_irq(&port->port_lock); return cond; } @@ -1194,7 +1191,7 @@ void gserial_cleanup(void) tasklet_kill(&port->push); /* wait for old opens to finish */ - wait_event(port->close_wait, gs_closed(port)); + wait_event(port->port.close_wait, gs_closed(port)); WARN_ON(port->port_usb != NULL); @@ -1268,7 +1265,7 @@ int gserial_connect(struct gserial *gser, u8 port_num) /* if it's already open, start I/O ... and notify the serial * protocol about open/close status (connect/disconnect). */ - if (port->open_count) { + if (port->port.count) { pr_debug("gserial_connect: start ttyGS%d\n", port->port_num); gs_start_io(port); if (gser->connect) @@ -1315,10 +1312,10 @@ void gserial_disconnect(struct gserial *gser) port->port_usb = NULL; gser->ioport = NULL; - if (port->open_count > 0 || port->openclose) { + if (port->port.count > 0 || port->openclose) { wake_up_interruptible(&port->drain_wait); - if (port->port_tty) - tty_hangup(port->port_tty); + if (port->port.tty) + tty_hangup(port->port.tty); } spin_unlock_irqrestore(&port->port_lock, flags); @@ -1331,7 +1328,7 @@ void gserial_disconnect(struct gserial *gser) /* finally, free any unused/unusable I/O buffers */ spin_lock_irqsave(&port->port_lock, flags); - if (port->open_count == 0 && !port->openclose) + if (port->port.count == 0 && !port->openclose) gs_buf_free(&port->port_write_buf); gs_free_requests(gser->out, &port->read_pool, NULL); gs_free_requests(gser->out, &port->read_queue, NULL); diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 2fa9865babed..e5e44f8cde9a 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); - udc->driver->unbind(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver); @@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev, usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { + usb_gadget_disconnect(udc->gadget); if (udc_is_newstyle(udc)) usb_gadget_udc_stop(udc->gadget, udc->driver); - usb_gadget_disconnect(udc->gadget); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index bc78c606c12b..ca4e03a1c73a 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -28,7 +28,7 @@ struct uvc_request_data { - unsigned int length; + __s32 length; __u8 data[60]; }; diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index 0cdf89d32a15..104ae9c81251 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -543,7 +543,7 @@ done: return ret; } -/* called with queue->irqlock held.. */ +/* called with &queue_irqlock held.. */ static struct uvc_buffer * uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf) { diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index f6e083b50191..2ca9386d655b 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data) if (data->length < 0) return usb_ep_set_halt(cdev->gadget->ep0); - req->length = min(uvc->event_length, data->length); + req->length = min_t(unsigned int, uvc->event_length, data->length); req->zero = data->length < uvc->event_length; req->dma = DMA_ADDR_INVALID; @@ -296,7 +296,7 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST) return -EINVAL; - return v4l2_event_subscribe(&handle->vfh, arg, 2); + return v4l2_event_subscribe(&handle->vfh, arg, 2, NULL); } case VIDIOC_UNSUBSCRIBE_EVENT: diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 31d34832907e..12ad516ada77 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -72,7 +72,7 @@ static const char longname[] = "Gadget Zero"; -unsigned buflen = 4096; +unsigned buflen = 4096; /* only used for bulk endpoints */ module_param(buflen, uint, 0); /* @@ -170,14 +170,17 @@ static struct usb_gadget_strings *dev_strings[] = { /*-------------------------------------------------------------------------*/ -struct usb_request *alloc_ep_req(struct usb_ep *ep) +struct usb_request *alloc_ep_req(struct usb_ep *ep, int len) { struct usb_request *req; req = usb_ep_alloc_request(ep, GFP_ATOMIC); if (req) { - req->length = buflen; - req->buf = kmalloc(buflen, GFP_ATOMIC); + if (len) + req->length = len; + else + req->length = buflen; + req->buf = kmalloc(req->length, GFP_ATOMIC); if (!req->buf) { usb_ep_free_request(ep, req); req = NULL; @@ -206,10 +209,15 @@ static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) } void disable_endpoints(struct usb_composite_dev *cdev, - struct usb_ep *in, struct usb_ep *out) + struct usb_ep *in, struct usb_ep *out, + struct usb_ep *iso_in, struct usb_ep *iso_out) { disable_ep(cdev, in); disable_ep(cdev, out); + if (iso_in) + disable_ep(cdev, iso_in); + if (iso_out) + disable_ep(cdev, iso_out); } /*-------------------------------------------------------------------------*/ @@ -311,7 +319,6 @@ static int __init zero_bind(struct usb_composite_dev *cdev) device_desc.bcdDevice = cpu_to_le16(0x9999); } - INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname); snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", |