diff options
Diffstat (limited to 'drivers/usb/host')
72 files changed, 665 insertions, 4965 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 40b5de597112..79b2e79dddd0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -287,12 +287,6 @@ config USB_EHCI_MV Dova, Armada 370 and Armada XP. See "Support for Marvell EBU on-chip EHCI USB controller" for those. -config USB_W90X900_EHCI - tristate "W90X900(W90P910) EHCI support" - depends on ARCH_W90X900 - ---help--- - Enables support for the W90X900 USB controller - config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" depends on ARCH_CNS3XXX @@ -441,7 +435,8 @@ config USB_OHCI_HCD_S3C2410 config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" - depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_OHCI_HCD + depends on ARCH_LPC32XX || COMPILE_TEST depends on USB_ISP1301 default y ---help--- @@ -717,32 +712,6 @@ config USB_RENESAS_USBHS_HCD To compile this driver as a module, choose M here: the module will be called renesas-usbhs. -config USB_WHCI_HCD - tristate "Wireless USB Host Controller Interface (WHCI) driver" - depends on USB_PCI && USB && UWB - select USB_WUSB - select UWB_WHCI - help - A driver for PCI-based Wireless USB Host Controllers that are - compliant with the WHCI specification. - - To compile this driver a module, choose M here: the module - will be called "whci-hcd". - -config USB_HWA_HCD - tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB - select USB_WUSB - select UWB_HWA - help - This driver enables you to connect Wireless USB devices to - your system using a Host Wire Adaptor USB dongle. This is an - UWB Radio Controller and WUSB Host Controller connected to - your machine via USB (specified in WUSB1.0). - - To compile this driver a module, choose M here: the module - will be called "hwa-hc". - config USB_IMX21_HCD tristate "i.MX21 HCD support" depends on ARM && ARCH_MXC diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 84514f71ae44..b191361257cc 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -35,8 +35,6 @@ ifneq ($(CONFIG_DEBUG_FS),) xhci-hcd-y += xhci-debugfs.o endif -obj-$(CONFIG_USB_WHCI_HCD) += whci/ - obj-$(CONFIG_USB_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o @@ -51,7 +49,6 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o -obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o @@ -82,7 +79,6 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o -obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 3ba140ceaf52..e893467d659c 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -100,9 +100,6 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); retval = -ENODEV; goto fail_create_hcd; } diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 3a29a1a8519c..01debfd03d4a 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -41,6 +41,7 @@ struct exynos_ehci_hcd { struct clk *clk; struct device_node *of_node; struct phy *phy[PHY_NUMBER]; + bool legacy_phy; }; #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) @@ -50,10 +51,22 @@ static int exynos_ehci_get_phy(struct device *dev, { struct device_node *child; struct phy *phy; - int phy_number; + int phy_number, num_phys; int ret; /* Get PHYs for the controller */ + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + for (phy_number = 0; phy_number < num_phys; phy_number++) { + phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number); + if (IS_ERR(phy)) + return PTR_ERR(phy); + exynos_ehci->phy[phy_number] = phy; + } + if (num_phys > 0) + return 0; + + /* Get PHYs using legacy bindings */ for_each_available_child_of_node(dev->of_node, child) { ret = of_property_read_u32(child, "reg", &phy_number); if (ret) { @@ -84,6 +97,7 @@ static int exynos_ehci_get_phy(struct device *dev, } } + exynos_ehci->legacy_phy = true; return 0; } @@ -205,11 +219,12 @@ static int exynos_ehci_probe(struct platform_device *pdev) ehci->caps = hcd->regs; /* - * Workaround: reset of_node pointer to avoid conflict between Exynos - * EHCI port subnodes and generic USB device bindings + * Workaround: reset of_node pointer to avoid conflict between legacy + * Exynos EHCI port subnodes and generic USB device bindings */ exynos_ehci->of_node = pdev->dev.of_node; - pdev->dev.of_node = NULL; + if (exynos_ehci->legacy_phy) + pdev->dev.of_node = NULL; /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index 656b8c08efc8..a2c3b4ec8a8b 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -30,7 +30,7 @@ static const struct hc_driver ehci_grlib_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9da7e22848c9..cf2b7ae93b7e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1193,7 +1193,7 @@ static const struct hc_driver ehci_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 7d20296cbe9f..fc125b3d06e7 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -115,10 +115,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "EHCI irq failed: %d\n", irq); + if (irq < 0) return irq; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(dev, res); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 790acf3633e8..a319b1df3011 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -223,9 +223,6 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); err = -ENODEV; goto err; } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index fe9422d3bcdc..b0882c13a1d1 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -149,7 +149,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; case PCI_VENDOR_ID_AMD: /* AMD PLL quirk */ - if (usb_amd_find_chipset_info()) + if (usb_amd_quirk_pll_check()) ehci->amd_pll_fix = 1; /* AMD8111 EHCI doesn't work, according to AMD errata */ if (pdev->device == 0x7463) { @@ -186,7 +186,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; case PCI_VENDOR_ID_ATI: /* AMD PLL quirk */ - if (usb_amd_find_chipset_info()) + if (usb_amd_quirk_pll_check()) ehci->amd_pll_fix = 1; /* diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 4c306fb6b069..769749ca5961 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -145,10 +145,8 @@ static int ehci_platform_probe(struct platform_device *dev) } irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c index 46e160370d6e..a2b610dbedfc 100644 --- a/drivers/usb/host/ehci-pmcmsp.c +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -250,7 +250,7 @@ static const struct hc_driver ehci_msp_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 576f7d79ad4e..6bbaee74f7e7 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -31,7 +31,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 454d8c624a3f..fb52133c3557 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -59,7 +59,7 @@ static const struct hc_driver ps3_ehci_hc_driver = { .product_desc = "PS3 EHCI Host Controller", .hcd_priv_size = sizeof(struct ehci_hcd), .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, .reset = ps3_ehci_hc_reset, .start = ehci_run, .stop = ehci_stop, diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index a9ee767952c1..2afde14dc425 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -33,7 +33,7 @@ static const struct hc_driver ehci_sh_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY | HCD_BH, + .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY | HCD_BH, /* * basic lifecycle operations @@ -85,9 +85,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); ret = -ENODEV; goto fail_create_hcd; } diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index ccb4e611001d..f74433aac948 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -158,10 +158,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) return -ENODEV; irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { dev_err(&dev->dev, "no memory resource provided"); diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c deleted file mode 100644 index 6d77ace1697b..000000000000 --- a/drivers/usb/host/ehci-w90x900.c +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/driver/usb/host/ehci-w90x900.c - * - * Copyright (c) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - */ - -#include <linux/dma-mapping.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/usb.h> -#include <linux/usb/hcd.h> - -#include "ehci.h" - -/* enable phy0 and phy1 for w90p910 */ -#define ENPHY (0x01<<8) -#define PHY0_CTR (0xA4) -#define PHY1_CTR (0xA8) - -#define DRIVER_DESC "EHCI w90x900 driver" - -static const char hcd_name[] = "ehci-w90x900 "; - -static struct hc_driver __read_mostly ehci_w90x900_hc_driver; - -static int ehci_w90x900_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct resource *res; - int retval = 0, irq; - unsigned long val; - - hcd = usb_create_hcd(&ehci_w90x900_hc_driver, - &pdev->dev, "w90x900 EHCI"); - if (!hcd) { - retval = -ENOMEM; - goto err1; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - retval = PTR_ERR(hcd->regs); - goto err2; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - - /* enable PHY 0,1,the regs only apply to w90p910 - * 0xA4,0xA8 were offsets of PHY0 and PHY1 controller of - * w90p910 IC relative to ehci->regs. - */ - val = __raw_readl(ehci->regs+PHY0_CTR); - val |= ENPHY; - __raw_writel(val, ehci->regs+PHY0_CTR); - - val = __raw_readl(ehci->regs+PHY1_CTR); - val |= ENPHY; - __raw_writel(val, ehci->regs+PHY1_CTR); - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - retval = irq; - goto err2; - } - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval != 0) - goto err2; - - device_wakeup_enable(hcd->self.controller); - return retval; -err2: - usb_put_hcd(hcd); -err1: - return retval; -} - -static int ehci_w90x900_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ehci_hcd_w90x900_driver = { - .probe = ehci_w90x900_probe, - .remove = ehci_w90x900_remove, - .driver = { - .name = "w90x900-ehci", - }, -}; - -static int __init ehci_w90X900_init(void) -{ - if (usb_disabled()) - return -ENODEV; - - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - - ehci_init_driver(&ehci_w90x900_hc_driver, NULL); - return platform_driver_register(&ehci_hcd_w90x900_driver); -} -module_init(ehci_w90X900_init); - -static void __exit ehci_w90X900_cleanup(void) -{ - platform_driver_unregister(&ehci_hcd_w90x900_driver); -} -module_exit(ehci_w90X900_cleanup); - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); -MODULE_ALIAS("platform:w90p910-ehci"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index d2a27578e440..67a6ee8cb5d8 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -66,7 +66,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 48fe9e6c2465..04733876c9c6 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -538,7 +538,7 @@ static const struct hc_driver fhci_driver = { /* generic hardware linkage */ .irq = fhci_irq, - .flags = HCD_USB11 | HCD_MEMORY, + .flags = HCD_DMA | HCD_USB11 | HCD_MEMORY, /* basic lifecycle operation */ .start = fhci_start, diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 77cc36efae95..9e0c98d6bdb0 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1629,6 +1629,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* see what we found out */ temp = check_reset_complete(fotg210, wIndex, status_reg, fotg210_readl(fotg210, status_reg)); + + /* restart schedule */ + fotg210->command |= CMD_RUN; + fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command); } if (!(temp & (PORT_RESUME|PORT_RESET))) { @@ -5504,7 +5508,7 @@ static const struct hc_driver fotg210_fotg210_hc_driver = { * generic hardware linkage */ .irq = fotg210_irq, - .flags = HCD_MEMORY | HCD_USB2, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2, /* * basic lifecycle operations diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c deleted file mode 100644 index 09a8ebd95588..000000000000 --- a/drivers/usb/host/hwa-hc.c +++ /dev/null @@ -1,875 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Host Wire Adapter: - * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * The HWA driver is a simple layer that forwards requests to the WAHC - * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host - * Controller) layers. - * - * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB - * Host Controller that is connected to your system via USB (a USB - * dongle that implements a USB host...). There is also a Device Wired - * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for - * transferring data (it is after all a USB host connected via - * Wireless USB), we have a common layer called Wire Adapter Host - * Controller that does all the hard work. The WUSBHC (Wireless USB - * Host Controller) is the part common to WUSB Host Controllers, the - * HWA and the PCI-based one, that is implemented following the WHCI - * spec. All these layers are implemented in ../wusbcore. - * - * The main functions are hwahc_op_urb_{en,de}queue(), that pass the - * job of converting a URB to a Wire Adapter - * - * Entry points: - * - * hwahc_driver_*() Driver initialization, registration and - * teardown. - * - * hwahc_probe() New device came up, create an instance for - * it [from device enumeration]. - * - * hwahc_disconnect() Remove device instance [from device - * enumeration]. - * - * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for - * starting/stopping/etc (some might be made also - * DWA). - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/workqueue.h> -#include <linux/wait.h> -#include <linux/completion.h> -#include "../wusbcore/wa-hc.h" -#include "../wusbcore/wusbhc.h" - -struct hwahc { - struct wusbhc wusbhc; /* has to be 1st */ - struct wahc wa; -}; - -/* - * FIXME should be wusbhc - * - * NOTE: we need to cache the Cluster ID because later...there is no - * way to get it :) - */ -static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_CLUSTER_ID, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - cluster_id, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", - cluster_id, result); - else - wusbhc->cluster_id = cluster_id; - dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); - return result; -} - -static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_NUM_DNTS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | slots, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Reset a WUSB host controller and wait for it to complete doing it. - * - * @usb_hcd: Pointer to WUSB Host Controller instance. - * - */ -static int hwahc_op_reset(struct usb_hcd *usb_hcd) -{ - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - mutex_lock(&wusbhc->mutex); - wa_nep_disarm(&hwahc->wa); - result = __wa_set_feature(&hwahc->wa, WA_RESET); - if (result < 0) { - dev_err(dev, "error commanding HC to reset: %d\n", result); - goto error_unlock; - } - result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); - if (result < 0) { - dev_err(dev, "error waiting for HC to reset: %d\n", result); - goto error_unlock; - } -error_unlock: - mutex_unlock(&wusbhc->mutex); - return result; -} - -/* - * FIXME: break this function up - */ -static int hwahc_op_start(struct usb_hcd *usb_hcd) -{ - u8 addr; - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - result = -ENOSPC; - mutex_lock(&wusbhc->mutex); - addr = wusb_cluster_id_get(); - if (addr == 0) - goto error_cluster_id_get; - result = __hwahc_set_cluster_id(hwahc, addr); - if (result < 0) - goto error_set_cluster_id; - - usb_hcd->uses_new_polling = 1; - set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); - usb_hcd->state = HC_STATE_RUNNING; - - /* - * prevent USB core from suspending the root hub since - * bus_suspend and bus_resume are not yet supported. - */ - pm_runtime_get_noresume(&usb_hcd->self.root_hub->dev); - - result = 0; -out: - mutex_unlock(&wusbhc->mutex); - return result; - -error_set_cluster_id: - wusb_cluster_id_put(wusbhc->cluster_id); -error_cluster_id_get: - goto out; - -} - -/* - * No need to abort pipes, as when this is called, all the children - * has been disconnected and that has done it [through - * usb_disable_interface() -> usb_disable_endpoint() -> - * hwahc_op_ep_disable() - >rpipe_ep_disable()]. - */ -static void hwahc_op_stop(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - - mutex_lock(&wusbhc->mutex); - wusb_cluster_id_put(wusbhc->cluster_id); - mutex_unlock(&wusbhc->mutex); -} - -static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - /* - * We cannot query the HWA for the WUSB time since that requires sending - * a synchronous URB and this function can be called in_interrupt. - * Instead, query the USB frame number for our parent and use that. - */ - return usb_get_current_frame_number(wa->usb_dev); -} - -static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, - gfp_t gfp) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); -} - -static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, - int status) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_dequeue(&hwahc->wa, urb, status); -} - -/* - * Release resources allocated for an endpoint - * - * If there is an associated rpipe to this endpoint, go ahead and put it. - */ -static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - rpipe_ep_disable(&hwahc->wa, ep); -} - -static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - result = __wa_set_feature(&hwahc->wa, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error commanding HC to start: %d\n", result); - goto error_stop; - } - result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error waiting for HC to start: %d\n", result); - goto error_stop; - } - result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "cannot listen to notifications: %d\n", result); - goto error_stop; - } - /* - * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set, - * disable transfer notifications. - */ - if (hwahc->wa.quirks & - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) { - struct usb_host_interface *cur_altsetting = - hwahc->wa.usb_iface->cur_altsetting; - - result = usb_control_msg(hwahc->wa.usb_dev, - usb_sndctrlpipe(hwahc->wa.usb_dev, 0), - WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS, - USB_DIR_OUT | USB_TYPE_VENDOR | - USB_RECIP_INTERFACE, - WA_REQ_ALEREON_FEATURE_SET, - cur_altsetting->desc.bInterfaceNumber, - NULL, 0, - USB_CTRL_SET_TIMEOUT); - /* - * If we successfully sent the control message, start DTI here - * because no transfer notifications will be received which is - * where DTI is normally started. - */ - if (result == 0) - result = wa_dti_start(&hwahc->wa); - else - result = 0; /* OK. Continue normally. */ - - if (result < 0) { - dev_err(dev, "cannot start DTI: %d\n", result); - goto error_dti_start; - } - } - - return result; - -error_dti_start: - wa_nep_disarm(&hwahc->wa); -error_stop: - __wa_clear_feature(&hwahc->wa, WA_ENABLE); - return result; -} - -static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc, int delay) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - int ret; - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_CHAN_STOP, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - delay * 1000, - iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret == 0) - msleep(delay); - - wa_nep_disarm(&hwahc->wa); - __wa_stop(&hwahc->wa); -} - -/* - * Set the UWB MAS allocation for the WUSB cluster - * - * @stream_index: stream to use (-1 for cancelling the allocation) - * @mas: mas bitmap to use - */ -static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, - const struct uwb_mas_bm *mas) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - u8 mas_le[UWB_NUM_MAS/8]; - - /* Set the stream index */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_STREAM_IDX, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - stream_index, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot set WUSB stream index: %d\n", result); - goto out; - } - uwb_mas_bm_copy_le(mas_le, mas); - /* Set the MAS allocation */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_WUSB_MAS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - mas_le, 32, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); -out: - return result; -} - -/* - * Add an IE to the host's MMC - * - * @interval: See WUSB1.0[8.5.3.1] - * @repeat_cnt: See WUSB1.0[8.5.3.1] - * @handle: See WUSB1.0[8.5.3.1] - * @wuie: Pointer to the header of the WUSB IE data to add. - * MUST BE allocated in a kmalloc buffer (no stack or - * vmalloc). - * - * NOTE: the format of the WUSB IEs for MMCs are different to the - * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + - * Id in WUSB IEs). Standards...you gotta love'em. - */ -static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, - u8 repeat_cnt, u8 handle, - struct wuie_hdr *wuie) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_ADD_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | repeat_cnt, - handle << 8 | iface_no, - wuie, wuie->bLength, USB_CTRL_SET_TIMEOUT); -} - -/* - * Remove an IE to the host's MMC - * - * @handle: See WUSB1.0[8.5.3.1] - */ -static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_REMOVE_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, handle << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Update device information for a given fake port - * - * @port_idx: Fake port to which device is connected (wusbhc index, not - * USB port number). - */ -static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, - struct wusb_dev *wusb_dev) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct hwa_dev_info *dev_info; - int ret; - - /* fill out the Device Info buffer and send it */ - dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); - if (!dev_info) - return -ENOMEM; - uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, - &wusb_dev->availability); - dev_info->bDeviceAddress = wusb_dev->addr; - - /* - * If the descriptors haven't been read yet, use a default PHY - * rate of 53.3 Mbit/s only. The correct value will be used - * when this will be called again as part of the - * authentication process (which occurs after the descriptors - * have been read). - */ - if (wusb_dev->wusb_cap_descr) - dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; - else - dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_DEV_INFO, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wusb_dev->port_idx << 8 | iface_no, - dev_info, sizeof(struct hwa_dev_info), - USB_CTRL_SET_TIMEOUT); - kfree(dev_info); - return ret; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size, - u8 key_idx) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct usb_key_descriptor *keyd; - size_t keyd_len; - - keyd_len = sizeof(*keyd) + key_size; - keyd = kzalloc(keyd_len, GFP_KERNEL); - if (keyd == NULL) - return -ENOMEM; - - keyd->bLength = keyd_len; - keyd->bDescriptorType = USB_DT_KEY; - keyd->tTKID[0] = (tkid >> 0) & 0xff; - keyd->tTKID[1] = (tkid >> 8) & 0xff; - keyd->tTKID[2] = (tkid >> 16) & 0xff; - memcpy(keyd->bKeyData, key, key_size); - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - USB_DT_KEY << 8 | key_idx, - port_idx << 8 | iface_no, - keyd, keyd_len, USB_CTRL_SET_TIMEOUT); - - kzfree(keyd); /* clear keys etc. */ - return result; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - u8 encryption_value; - - /* Tell the host which key to use to talk to the device */ - if (key) { - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, - key, key_size, key_idx); - if (result < 0) - goto error_set_key; - encryption_value = wusbhc->ccm1_etd->bEncryptionValue; - } else { - /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ - encryption_value = 0; - } - - /* Set the encryption type for communicating with the device */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_ENCRYPTION, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - encryption_value, port_idx << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " - "port index %u to %s (value %d): %d\n", port_idx, - wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), - wusbhc->ccm1_etd->bEncryptionValue, result); -error_set_key: - return result; -} - -/* - * Set host's GTK key - */ -static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *key, size_t key_size) -{ - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); -} - -/* - * Get the Wire Adapter class-specific descriptor - * - * NOTE: this descriptor comes with the big bundled configuration - * descriptor that includes the interfaces' and endpoints', so - * we just look for it in the cached copy kept by the USB stack. - * - * NOTE2: We convert LE fields to CPU order. - */ -static int wa_fill_descr(struct wahc *wa) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - char *itr; - struct usb_device *usb_dev = wa->usb_dev; - struct usb_descriptor_header *hdr; - struct usb_wa_descriptor *wa_descr; - size_t itr_size, actconfig_idx; - - actconfig_idx = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[actconfig_idx]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - while (itr_size >= sizeof(*hdr)) { - hdr = (struct usb_descriptor_header *) itr; - dev_dbg(dev, "Extra device descriptor: " - "type %02x/%u bytes @ %zu (%zu left)\n", - hdr->bDescriptorType, hdr->bLength, - (itr - usb_dev->rawdescriptors[actconfig_idx]), - itr_size); - if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) - goto found; - itr += hdr->bLength; - itr_size -= hdr->bLength; - } - dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); - return -ENODEV; - -found: - result = -EINVAL; - if (hdr->bLength > itr_size) { /* is it available? */ - dev_err(dev, "incomplete Wire Adapter Class descriptor " - "(%zu bytes left, %u needed)\n", - itr_size, hdr->bLength); - goto error; - } - if (hdr->bLength < sizeof(*wa->wa_descr)) { - dev_err(dev, "short Wire Adapter Class descriptor\n"); - goto error; - } - wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; - if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100) - dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", - (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8, - le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff); - result = 0; -error: - return result; -} - -static const struct hc_driver hwahc_hc_driver = { - .description = "hwa-hcd", - .product_desc = "Wireless USB HWA host controller", - .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), - .irq = NULL, /* FIXME */ - .flags = HCD_USB25, - .reset = hwahc_op_reset, - .start = hwahc_op_start, - .stop = hwahc_op_stop, - .get_frame_number = hwahc_op_get_frame_number, - .urb_enqueue = hwahc_op_urb_enqueue, - .urb_dequeue = hwahc_op_urb_dequeue, - .endpoint_disable = hwahc_op_endpoint_disable, - - .hub_status_data = wusbhc_rh_status_data, - .hub_control = wusbhc_rh_control, - .start_port_reset = wusbhc_rh_start_port_reset, -}; - -static int hwahc_security_create(struct hwahc *hwahc) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct usb_device *usb_dev = hwahc->wa.usb_dev; - struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd; - struct usb_encryption_descriptor *etd; - void *itr, *top; - size_t itr_size, needed, bytes; - u8 index; - char buf[64]; - - /* Find the host's security descriptors in the config descr bundle */ - index = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[index]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - top = itr + itr_size; - result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], - le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), - USB_DT_SECURITY, (void **) &secd, sizeof(*secd)); - if (result == -1) { - dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); - return 0; - } - needed = sizeof(*secd); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptor header (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - needed = le16_to_cpu(secd->wTotalLength); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptors (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - /* Walk over the sec descriptors and store CCM1's on wusbhc */ - itr = (void *) secd + sizeof(*secd); - top = (void *) secd + le16_to_cpu(secd->wTotalLength); - index = 0; - bytes = 0; - while (itr < top) { - etd = itr; - if (top - itr < sizeof(*etd)) { - dev_err(dev, "BUG: bad host security descriptor; " - "not enough data (%zu vs %zu left)\n", - top - itr, sizeof(*etd)); - break; - } - if (etd->bLength < sizeof(*etd)) { - dev_err(dev, "BUG: bad host encryption descriptor; " - "descriptor is too short " - "(%zu vs %zu needed)\n", - (size_t)etd->bLength, sizeof(*etd)); - break; - } - itr += etd->bLength; - bytes += snprintf(buf + bytes, sizeof(buf) - bytes, - "%s (0x%02x) ", - wusb_et_name(etd->bEncryptionType), - etd->bEncryptionValue); - wusbhc->ccm1_etd = etd; - } - dev_info(dev, "supported encryption types: %s\n", buf); - if (wusbhc->ccm1_etd == NULL) { - dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); - return 0; - } - /* Pretty print what we support */ - return 0; -} - -static void hwahc_security_release(struct hwahc *hwahc) -{ - /* nothing to do here so far... */ -} - -static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface, - kernel_ulong_t quirks) -{ - int result; - struct device *dev = &iface->dev; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct usb_device *usb_dev = interface_to_usbdev(iface); - - wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ - wa->usb_iface = usb_get_intf(iface); - wusbhc->dev = dev; - /* defer getting the uwb_rc handle until it is needed since it - * may not have been registered by the hwa_rc driver yet. */ - wusbhc->uwb_rc = NULL; - result = wa_fill_descr(wa); /* Get the device descriptor */ - if (result < 0) - goto error_fill_descriptor; - if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { - dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " - "adapter (%u ports)\n", wa->wa_descr->bNumPorts); - wusbhc->ports_max = USB_MAXCHILDREN; - } else { - wusbhc->ports_max = wa->wa_descr->bNumPorts; - } - wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; - wusbhc->start = __hwahc_op_wusbhc_start; - wusbhc->stop = __hwahc_op_wusbhc_stop; - wusbhc->mmcie_add = __hwahc_op_mmcie_add; - wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; - wusbhc->dev_info_set = __hwahc_op_dev_info_set; - wusbhc->bwa_set = __hwahc_op_bwa_set; - wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; - wusbhc->set_ptk = __hwahc_op_set_ptk; - wusbhc->set_gtk = __hwahc_op_set_gtk; - result = hwahc_security_create(hwahc); - if (result < 0) { - dev_err(dev, "Can't initialize security: %d\n", result); - goto error_security_create; - } - wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ - result = wusbhc_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Can't create WUSB HC structures: %d\n", result); - goto error_wusbhc_create; - } - result = wa_create(&hwahc->wa, iface, quirks); - if (result < 0) - goto error_wa_create; - return 0; - -error_wa_create: - wusbhc_destroy(&hwahc->wusbhc); -error_wusbhc_create: - /* WA Descr fill allocs no resources */ -error_security_create: -error_fill_descriptor: - usb_put_intf(iface); - usb_put_dev(usb_dev); - return result; -} - -static void hwahc_destroy(struct hwahc *hwahc) -{ - struct wusbhc *wusbhc = &hwahc->wusbhc; - - mutex_lock(&wusbhc->mutex); - __wa_destroy(&hwahc->wa); - wusbhc_destroy(&hwahc->wusbhc); - hwahc_security_release(hwahc); - hwahc->wusbhc.dev = NULL; - uwb_rc_put(wusbhc->uwb_rc); - usb_put_intf(hwahc->wa.usb_iface); - usb_put_dev(hwahc->wa.usb_dev); - mutex_unlock(&wusbhc->mutex); -} - -static void hwahc_init(struct hwahc *hwahc) -{ - wa_init(&hwahc->wa); -} - -static int hwahc_probe(struct usb_interface *usb_iface, - const struct usb_device_id *id) -{ - int result; - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - struct device *dev = &usb_iface->dev; - - result = -ENOMEM; - usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); - if (usb_hcd == NULL) { - dev_err(dev, "unable to allocate instance\n"); - goto error_alloc; - } - usb_hcd->wireless = 1; - usb_hcd->self.sg_tablesize = ~0; - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - hwahc_init(hwahc); - result = hwahc_create(hwahc, usb_iface, id->driver_info); - if (result < 0) { - dev_err(dev, "Cannot initialize internals: %d\n", result); - goto error_hwahc_create; - } - result = usb_add_hcd(usb_hcd, 0, 0); - if (result < 0) { - dev_err(dev, "Cannot add HCD: %d\n", result); - goto error_add_hcd; - } - device_wakeup_enable(usb_hcd->self.controller); - result = wusbhc_b_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); - goto error_wusbhc_b_create; - } - return 0; - -error_wusbhc_b_create: - usb_remove_hcd(usb_hcd); -error_add_hcd: - hwahc_destroy(hwahc); -error_hwahc_create: - usb_put_hcd(usb_hcd); -error_alloc: - return result; -} - -static void hwahc_disconnect(struct usb_interface *usb_iface) -{ - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - - usb_hcd = usb_get_intfdata(usb_iface); - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - wusbhc_b_destroy(&hwahc->wusbhc); - usb_remove_hcd(usb_hcd); - hwahc_destroy(hwahc); - usb_put_hcd(usb_hcd); -} - -static const struct usb_device_id hwahc_id_table[] = { - /* Alereon 5310 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* Alereon 5611 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* FIXME: use class labels for this */ - { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, - {}, -}; -MODULE_DEVICE_TABLE(usb, hwahc_id_table); - -static struct usb_driver hwahc_driver = { - .name = "hwa-hc", - .probe = hwahc_probe, - .disconnect = hwahc_disconnect, - .id_table = hwahc_id_table, -}; - -module_usb_driver(hwahc_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 6e3dad19d369..5835f9966204 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1771,7 +1771,7 @@ static const struct hc_driver imx21_hc_driver = { .product_desc = "IMX21 USB Host Controller", .hcd_priv_size = sizeof(struct imx21), - .flags = HCD_USB11, + .flags = HCD_DMA | HCD_USB11, .irq = imx21_irq, .reset = imx21_hc_reset, @@ -1836,10 +1836,8 @@ static int imx21_probe(struct platform_device *pdev) if (!res) return -ENODEV; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq); + if (irq < 0) return irq; - } hcd = usb_create_hcd(&imx21_hc_driver, &pdev->dev, dev_name(&pdev->dev)); diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 74da136d322a..a87c0b26279e 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1581,12 +1581,6 @@ static int isp116x_probe(struct platform_device *pdev) irq = ires->start; irqflags = ires->flags & IRQF_TRIGGER_MASK; - if (pdev->dev.dma_mask) { - DBG("DMA not supported\n"); - ret = -EINVAL; - goto err1; - } - if (!request_mem_region(addr->start, 2, hcd_name)) { ret = -EBUSY; goto err1; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 28bf8bfb091e..96f8daa11f25 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2645,11 +2645,6 @@ static int isp1362_probe(struct platform_device *pdev) if (pdev->num_resources < 3) return -ENODEV; - if (pdev->dev.dma_mask) { - DBG(1, "won't do DMA"); - return -ENODEV; - } - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) return -ENODEV; diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index afa321ab55fc..8819f502b6a6 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1800,21 +1800,6 @@ max3421_bus_resume(struct usb_hcd *hcd) return -1; } -/* - * The SPI driver already takes care of DMA-mapping/unmapping, so no - * reason to do it twice. - */ -static int -max3421_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) -{ - return 0; -} - -static void -max3421_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) -{ -} - static const struct hc_driver max3421_hcd_desc = { .description = "max3421", .product_desc = DRIVER_DESC, @@ -1826,8 +1811,6 @@ static const struct hc_driver max3421_hcd_desc = { .get_frame_number = max3421_get_frame_number, .urb_enqueue = max3421_urb_enqueue, .urb_dequeue = max3421_urb_dequeue, - .map_urb_for_dma = max3421_map_urb_for_dma, - .unmap_urb_for_dma = max3421_unmap_urb_for_dma, .endpoint_disable = max3421_endpoint_disable, .hub_status_data = max3421_hub_status_data, .hub_control = max3421_hub_control, diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 905c6317e0c3..d5ce98e205c7 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -32,6 +32,7 @@ struct exynos_ohci_hcd { struct clk *clk; struct device_node *of_node; struct phy *phy[PHY_NUMBER]; + bool legacy_phy; }; static int exynos_ohci_get_phy(struct device *dev, @@ -39,10 +40,22 @@ static int exynos_ohci_get_phy(struct device *dev, { struct device_node *child; struct phy *phy; - int phy_number; + int phy_number, num_phys; int ret; /* Get PHYs for the controller */ + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + for (phy_number = 0; phy_number < num_phys; phy_number++) { + phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number); + if (IS_ERR(phy)) + return PTR_ERR(phy); + exynos_ohci->phy[phy_number] = phy; + } + if (num_phys > 0) + return 0; + + /* Get PHYs using legacy bindings */ for_each_available_child_of_node(dev->of_node, child) { ret = of_property_read_u32(child, "reg", &phy_number); if (ret) { @@ -73,6 +86,7 @@ static int exynos_ohci_get_phy(struct device *dev, } } + exynos_ohci->legacy_phy = true; return 0; } @@ -172,11 +186,12 @@ static int exynos_ohci_probe(struct platform_device *pdev) } /* - * Workaround: reset of_node pointer to avoid conflict between Exynos - * OHCI port subnodes and generic USB device bindings + * Workaround: reset of_node pointer to avoid conflict between legacy + * Exynos OHCI port subnodes and generic USB device bindings */ exynos_ohci->of_node = pdev->dev.of_node; - pdev->dev.of_node = NULL; + if (exynos_ohci->legacy_phy) + pdev->dev.of_node = NULL; err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b457fdaff297..4de91653a2c7 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -419,8 +419,7 @@ static void ohci_usb_reset (struct ohci_hcd *ohci) * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ -static void -ohci_shutdown (struct usb_hcd *hcd) +static void _ohci_shutdown(struct usb_hcd *hcd) { struct ohci_hcd *ohci; @@ -436,6 +435,16 @@ ohci_shutdown (struct usb_hcd *hcd) ohci->rh_state = OHCI_RH_HALTED; } +static void ohci_shutdown(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + _ohci_shutdown(hcd); + spin_unlock_irqrestore(&ohci->lock, flags); +} + /*-------------------------------------------------------------------------* * HC functions *-------------------------------------------------------------------------*/ @@ -760,7 +769,7 @@ static void io_watchdog_func(struct timer_list *t) died: usb_hc_died(ohci_to_hcd(ohci)); ohci_dump(ohci); - ohci_shutdown(ohci_to_hcd(ohci)); + _ohci_shutdown(ohci_to_hcd(ohci)); goto done; } else { /* No write back because the done queue was empty */ @@ -1178,7 +1187,7 @@ static const struct hc_driver ohci_hc_driver = { * generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, /* * basic lifecycle operations diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f5f532601092..c561881d0e79 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -29,10 +29,7 @@ #include "ohci.h" -#include <mach/hardware.h> - #define USB_CONFIG_BASE 0x31020000 -#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) /* USB_OTG_STAT_CONTROL bit defines */ #define TRANSPARENT_I2C_EN (1 << 7) @@ -122,19 +119,33 @@ static inline void isp1301_vbus_off(void) static void ohci_nxp_start_hc(void) { - unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; + void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4); + unsigned long tmp; + + if (WARN_ON(!usb_otg_stat_control)) + return; + + tmp = __raw_readl(usb_otg_stat_control) | HOST_EN; - __raw_writel(tmp, USB_OTG_STAT_CONTROL); + __raw_writel(tmp, usb_otg_stat_control); isp1301_vbus_on(); + + iounmap(usb_otg_stat_control); } static void ohci_nxp_stop_hc(void) { + void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4); unsigned long tmp; + if (WARN_ON(!usb_otg_stat_control)) + return; + isp1301_vbus_off(); - tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN; - __raw_writel(tmp, USB_OTG_STAT_CONTROL); + tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN; + __raw_writel(tmp, usb_otg_stat_control); + + iounmap(usb_otg_stat_control); } static int ohci_hcd_nxp_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index a033f7d855e0..f4e13a3fddee 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -152,7 +152,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); - if (usb_amd_find_chipset_info()) + if (usb_amd_quirk_pll_check()) ohci->flags |= OHCI_QUIRK_AMD_PLL; /* SB800 needs pre-fetch fix */ diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 65a1c3fdc88c..7addfc2cbadc 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -111,10 +111,8 @@ static int ohci_platform_probe(struct platform_device *dev) return err; irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 76a9b40b08f1..45f7cceb6df3 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -50,7 +50,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = { * generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, + .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY, /* * basic lifecycle operations diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 395f9d3bc849..f77cd6af0ccf 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -46,7 +46,7 @@ static const struct hc_driver ps3_ohci_hc_driver = { .product_desc = "PS3 OHCI Host Controller", .hcd_priv_size = sizeof(struct ohci_hcd), .irq = ohci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, .reset = ps3_ohci_hc_reset, .start = ps3_ohci_hc_start, .stop = ohci_stop, diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 3e2474959735..7679fb583e41 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -148,7 +148,7 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode) uhcrhda |= RH_A_NPS; break; case PMM_GLOBAL_MODE: - uhcrhda &= ~(RH_A_NPS & RH_A_PSM); + uhcrhda &= ~(RH_A_NPS | RH_A_PSM); break; case PMM_PERPORT_MODE: uhcrhda &= ~(RH_A_NPS); diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index ebec9a7699e3..8e19a5eb5b62 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -84,7 +84,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { * generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, + .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY, /* * basic lifecycle operations diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index 638a92bd2cdc..ac796ccd93ef 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -138,10 +138,8 @@ static int st_ohci_platform_probe(struct platform_device *dev) return -ENODEV; irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index d5a293a707b6..fb6f5e9ae5c6 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -97,10 +97,13 @@ static void tmio_stop_hc(struct platform_device *dev) switch (ohci->num_ports) { default: dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports); + /* fall through */ case 3: pm |= CCR_PM_USBPW3; + /* fall through */ case 2: pm |= CCR_PM_USBPW2; + /* fall through */ case 1: pm |= CCR_PM_USBPW1; } diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 47c5515a9ce4..e67242e437ed 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -31,10 +31,449 @@ #include <linux/irq.h> #include <linux/platform_device.h> -#include "oxu210hp.h" - #define DRIVER_VERSION "0.0.50" +#define OXU_DEVICEID 0x00 + #define OXU_REV_MASK 0xffff0000 + #define OXU_REV_SHIFT 16 + #define OXU_REV_2100 0x2100 + #define OXU_BO_SHIFT 8 + #define OXU_BO_MASK (0x3 << OXU_BO_SHIFT) + #define OXU_MAJ_REV_SHIFT 4 + #define OXU_MAJ_REV_MASK (0xf << OXU_MAJ_REV_SHIFT) + #define OXU_MIN_REV_SHIFT 0 + #define OXU_MIN_REV_MASK (0xf << OXU_MIN_REV_SHIFT) +#define OXU_HOSTIFCONFIG 0x04 +#define OXU_SOFTRESET 0x08 + #define OXU_SRESET (1 << 0) + +#define OXU_PIOBURSTREADCTRL 0x0C + +#define OXU_CHIPIRQSTATUS 0x10 +#define OXU_CHIPIRQEN_SET 0x14 +#define OXU_CHIPIRQEN_CLR 0x18 + #define OXU_USBSPHLPWUI 0x00000080 + #define OXU_USBOTGLPWUI 0x00000040 + #define OXU_USBSPHI 0x00000002 + #define OXU_USBOTGI 0x00000001 + +#define OXU_CLKCTRL_SET 0x1C + #define OXU_SYSCLKEN 0x00000008 + #define OXU_USBSPHCLKEN 0x00000002 + #define OXU_USBOTGCLKEN 0x00000001 + +#define OXU_ASO 0x68 + #define OXU_SPHPOEN 0x00000100 + #define OXU_OVRCCURPUPDEN 0x00000800 + #define OXU_ASO_OP (1 << 10) + #define OXU_COMPARATOR 0x000004000 + +#define OXU_USBMODE 0x1A8 + #define OXU_VBPS 0x00000020 + #define OXU_ES_LITTLE 0x00000000 + #define OXU_CM_HOST_ONLY 0x00000003 + +/* + * Proper EHCI structs & defines + */ + +/* Magic numbers that can affect system performance */ +#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ +#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ +#define EHCI_TUNE_RL_TT 0 +#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ +#define EHCI_TUNE_MULT_TT 1 +#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ + +struct oxu_hcd; + +/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ + +/* Section 2.2 Host Controller Capability Registers */ +struct ehci_caps { + /* these fields are specified as 8 and 16 bit registers, + * but some hosts can't perform 8 or 16 bit PCI accesses. + */ + u32 hc_capbase; +#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ +#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ + u32 hcs_params; /* HCSPARAMS - offset 0x4 */ +#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ +#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ +#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ +#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ +#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ +#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ +#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ + + u32 hcc_params; /* HCCPARAMS - offset 0x8 */ +#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ +#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ +#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ +#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ +#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ +#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ + u8 portroute[8]; /* nibbles for routing - offset 0xC */ +} __packed; + + +/* Section 2.3 Host Controller Operational Registers */ +struct ehci_regs { + /* USBCMD: offset 0x00 */ + u32 command; +/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ +#define CMD_PARK (1<<11) /* enable "park" on async qh */ +#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ +#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ +#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ +#define CMD_ASE (1<<5) /* async schedule enable */ +#define CMD_PSE (1<<4) /* periodic schedule enable */ +/* 3:2 is periodic frame list size */ +#define CMD_RESET (1<<1) /* reset HC not bus */ +#define CMD_RUN (1<<0) /* start/stop HC */ + + /* USBSTS: offset 0x04 */ + u32 status; +#define STS_ASS (1<<15) /* Async Schedule Status */ +#define STS_PSS (1<<14) /* Periodic Schedule Status */ +#define STS_RECL (1<<13) /* Reclamation */ +#define STS_HALT (1<<12) /* Not running (any reason) */ +/* some bits reserved */ + /* these STS_* flags are also intr_enable bits (USBINTR) */ +#define STS_IAA (1<<5) /* Interrupted on async advance */ +#define STS_FATAL (1<<4) /* such as some PCI access errors */ +#define STS_FLR (1<<3) /* frame list rolled over */ +#define STS_PCD (1<<2) /* port change detect */ +#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ +#define STS_INT (1<<0) /* "normal" completion (short, ...) */ + +#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) + + /* USBINTR: offset 0x08 */ + u32 intr_enable; + + /* FRINDEX: offset 0x0C */ + u32 frame_index; /* current microframe number */ + /* CTRLDSSEGMENT: offset 0x10 */ + u32 segment; /* address bits 63:32 if needed */ + /* PERIODICLISTBASE: offset 0x14 */ + u32 frame_list; /* points to periodic list */ + /* ASYNCLISTADDR: offset 0x18 */ + u32 async_next; /* address of next async queue head */ + + u32 reserved[9]; + + /* CONFIGFLAG: offset 0x40 */ + u32 configured_flag; +#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ + + /* PORTSC: offset 0x44 */ + u32 port_status[0]; /* up to N_PORTS */ +/* 31:23 reserved */ +#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ +#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ +#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ +/* 19:16 for port testing */ +#define PORT_LED_OFF (0<<14) +#define PORT_LED_AMBER (1<<14) +#define PORT_LED_GREEN (2<<14) +#define PORT_LED_MASK (3<<14) +#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ +#define PORT_POWER (1<<12) /* true: has power (see PPC) */ +#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ +/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ +/* 9 reserved */ +#define PORT_RESET (1<<8) /* reset port */ +#define PORT_SUSPEND (1<<7) /* suspend port */ +#define PORT_RESUME (1<<6) /* resume it */ +#define PORT_OCC (1<<5) /* over current change */ +#define PORT_OC (1<<4) /* over current active */ +#define PORT_PEC (1<<3) /* port enable change */ +#define PORT_PE (1<<2) /* port enable */ +#define PORT_CSC (1<<1) /* connect status change */ +#define PORT_CONNECT (1<<0) /* device connected */ +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) +} __packed; + +/* Appendix C, Debug port ... intended for use with special "debug devices" + * that can help if there's no serial console. (nonstandard enumeration.) + */ +struct ehci_dbg_port { + u32 control; +#define DBGP_OWNER (1<<30) +#define DBGP_ENABLED (1<<28) +#define DBGP_DONE (1<<16) +#define DBGP_INUSE (1<<10) +#define DBGP_ERRCODE(x) (((x)>>7)&0x07) +# define DBGP_ERR_BAD 1 +# define DBGP_ERR_SIGNAL 2 +#define DBGP_ERROR (1<<6) +#define DBGP_GO (1<<5) +#define DBGP_OUT (1<<4) +#define DBGP_LEN(x) (((x)>>0)&0x0f) + u32 pids; +#define DBGP_PID_GET(x) (((x)>>16)&0xff) +#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) + u32 data03; + u32 data47; + u32 address; +#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) +} __packed; + +#define QTD_NEXT(dma) cpu_to_le32((u32)dma) + +/* + * EHCI Specification 0.95 Section 3.5 + * QTD: describe data transfer components (buffer, direction, ...) + * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". + * + * These are associated only with "QH" (Queue Head) structures, + * used with control, bulk, and interrupt transfers. + */ +struct ehci_qtd { + /* first part defined by EHCI spec */ + __le32 hw_next; /* see EHCI 3.5.1 */ + __le32 hw_alt_next; /* see EHCI 3.5.2 */ + __le32 hw_token; /* see EHCI 3.5.3 */ +#define QTD_TOGGLE (1 << 31) /* data toggle */ +#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) +#define QTD_IOC (1 << 15) /* interrupt on complete */ +#define QTD_CERR(tok) (((tok)>>10) & 0x3) +#define QTD_PID(tok) (((tok)>>8) & 0x3) +#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */ +#define QTD_STS_HALT (1 << 6) /* halted on error */ +#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */ +#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */ +#define QTD_STS_XACT (1 << 3) /* device gave illegal response */ +#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */ +#define QTD_STS_STS (1 << 1) /* split transaction state */ +#define QTD_STS_PING (1 << 0) /* issue PING? */ + __le32 hw_buf[5]; /* see EHCI 3.5.4 */ + __le32 hw_buf_hi[5]; /* Appendix B */ + + /* the rest is HCD-private */ + dma_addr_t qtd_dma; /* qtd address */ + struct list_head qtd_list; /* sw qtd list */ + struct urb *urb; /* qtd's urb */ + size_t length; /* length of buffer */ + + u32 qtd_buffer_len; + void *buffer; + dma_addr_t buffer_dma; + void *transfer_buffer; + void *transfer_dma; +} __aligned(32); + +/* mask NakCnt+T in qh->hw_alt_next */ +#define QTD_MASK cpu_to_le32 (~0x1f) + +#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1) + +/* Type tag from {qh, itd, sitd, fstn}->hw_next */ +#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1)) + +/* values for that type tag */ +#define Q_TYPE_QH cpu_to_le32 (1 << 1) + +/* next async queue entry, or pointer to interrupt/periodic QH */ +#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) + +/* for periodic/async schedules and qtd lists, mark end of list */ +#define EHCI_LIST_END cpu_to_le32(1) /* "null pointer" to hw */ + +/* + * Entries in periodic shadow table are pointers to one of four kinds + * of data structure. That's dictated by the hardware; a type tag is + * encoded in the low bits of the hardware's periodic schedule. Use + * Q_NEXT_TYPE to get the tag. + * + * For entries in the async schedule, the type tag always says "qh". + */ +union ehci_shadow { + struct ehci_qh *qh; /* Q_TYPE_QH */ + __le32 *hw_next; /* (all types) */ + void *ptr; +}; + +/* + * EHCI Specification 0.95 Section 3.6 + * QH: describes control/bulk/interrupt endpoints + * See Fig 3-7 "Queue Head Structure Layout". + * + * These appear in both the async and (for interrupt) periodic schedules. + */ + +struct ehci_qh { + /* first part defined by EHCI spec */ + __le32 hw_next; /* see EHCI 3.6.1 */ + __le32 hw_info1; /* see EHCI 3.6.2 */ +#define QH_HEAD 0x00008000 + __le32 hw_info2; /* see EHCI 3.6.2 */ +#define QH_SMASK 0x000000ff +#define QH_CMASK 0x0000ff00 +#define QH_HUBADDR 0x007f0000 +#define QH_HUBPORT 0x3f800000 +#define QH_MULT 0xc0000000 + __le32 hw_current; /* qtd list - see EHCI 3.6.4 */ + + /* qtd overlay (hardware parts of a struct ehci_qtd) */ + __le32 hw_qtd_next; + __le32 hw_alt_next; + __le32 hw_token; + __le32 hw_buf[5]; + __le32 hw_buf_hi[5]; + + /* the rest is HCD-private */ + dma_addr_t qh_dma; /* address of qh */ + union ehci_shadow qh_next; /* ptr to qh; or periodic */ + struct list_head qtd_list; /* sw qtd list */ + struct ehci_qtd *dummy; + struct ehci_qh *reclaim; /* next to reclaim */ + + struct oxu_hcd *oxu; + struct kref kref; + unsigned int stamp; + + u8 qh_state; +#define QH_STATE_LINKED 1 /* HC sees this */ +#define QH_STATE_UNLINK 2 /* HC may still see this */ +#define QH_STATE_IDLE 3 /* HC doesn't see this */ +#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */ +#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ + + /* periodic schedule info */ + u8 usecs; /* intr bandwidth */ + u8 gap_uf; /* uframes split/csplit gap */ + u8 c_usecs; /* ... split completion bw */ + u16 tt_usecs; /* tt downstream bandwidth */ + unsigned short period; /* polling interval */ + unsigned short start; /* where polling starts */ +#define NO_FRAME ((unsigned short)~0) /* pick new start */ + struct usb_device *dev; /* access to TT */ +} __aligned(32); + +/* + * Proper OXU210HP structs + */ + +#define OXU_OTG_CORE_OFFSET 0x00400 +#define OXU_OTG_CAP_OFFSET (OXU_OTG_CORE_OFFSET + 0x100) +#define OXU_SPH_CORE_OFFSET 0x00800 +#define OXU_SPH_CAP_OFFSET (OXU_SPH_CORE_OFFSET + 0x100) + +#define OXU_OTG_MEM 0xE000 +#define OXU_SPH_MEM 0x16000 + +/* Only how many elements & element structure are specifies here. */ +/* 2 host controllers are enabled - total size <= 28 kbytes */ +#define DEFAULT_I_TDPS 1024 +#define QHEAD_NUM 16 +#define QTD_NUM 32 +#define SITD_NUM 8 +#define MURB_NUM 8 + +#define BUFFER_NUM 8 +#define BUFFER_SIZE 512 + +struct oxu_info { + struct usb_hcd *hcd[2]; +}; + +struct oxu_buf { + u8 buffer[BUFFER_SIZE]; +} __aligned(BUFFER_SIZE); + +struct oxu_onchip_mem { + struct oxu_buf db_pool[BUFFER_NUM]; + + u32 frame_list[DEFAULT_I_TDPS]; + struct ehci_qh qh_pool[QHEAD_NUM]; + struct ehci_qtd qtd_pool[QTD_NUM]; +} __aligned(4 << 10); + +#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ + +struct oxu_murb { + struct urb urb; + struct urb *main; + u8 last; +}; + +struct oxu_hcd { /* one per controller */ + unsigned int is_otg:1; + + u8 qh_used[QHEAD_NUM]; + u8 qtd_used[QTD_NUM]; + u8 db_used[BUFFER_NUM]; + u8 murb_used[MURB_NUM]; + + struct oxu_onchip_mem __iomem *mem; + spinlock_t mem_lock; + + struct timer_list urb_timer; + + struct ehci_caps __iomem *caps; + struct ehci_regs __iomem *regs; + + u32 hcs_params; /* cached register copy */ + spinlock_t lock; + + /* async schedule support */ + struct ehci_qh *async; + struct ehci_qh *reclaim; + unsigned int reclaim_ready:1; + unsigned int scanning:1; + + /* periodic schedule support */ + unsigned int periodic_size; + __le32 *periodic; /* hw periodic table */ + dma_addr_t periodic_dma; + unsigned int i_thresh; /* uframes HC might cache */ + + union ehci_shadow *pshadow; /* mirror hw periodic table */ + int next_uframe; /* scan periodic, start here */ + unsigned int periodic_sched; /* periodic activity count */ + + /* per root hub port */ + unsigned long reset_done[EHCI_MAX_ROOT_PORTS]; + /* bit vectors (one bit per port) */ + unsigned long bus_suspended; /* which ports were + * already suspended at the + * start of a bus suspend + */ + unsigned long companion_ports;/* which ports are dedicated + * to the companion controller + */ + + struct timer_list watchdog; + unsigned long actions; + unsigned int stamp; + unsigned long next_statechange; + u32 command; + + /* SILICON QUIRKS */ + struct list_head urb_list; /* this is the head to urb + * queue that didn't get enough + * resources + */ + struct oxu_murb *murb_pool; /* murb per split big urb */ + unsigned int urb_len; + + u8 sbrn; /* packed release number */ +}; + +#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */ +#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ +#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ +#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ + +enum ehci_timer_action { + TIMER_IO_WATCHDOG, + TIMER_IAA_WATCHDOG, + TIMER_ASYNC_SHRINK, + TIMER_ASYNC_OFF, +}; + /* * Main defines */ @@ -2649,9 +3088,6 @@ static int oxu_reset(struct usb_hcd *hcd) INIT_LIST_HEAD(&oxu->urb_list); oxu->urb_len = 0; - /* FIMXE */ - hcd->self.controller->dma_mask = NULL; - if (oxu->is_otg) { oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET; oxu->regs = hcd->regs + OXU_OTG_CAP_OFFSET + \ diff --git a/drivers/usb/host/oxu210hp.h b/drivers/usb/host/oxu210hp.h deleted file mode 100644 index 437044147862..000000000000 --- a/drivers/usb/host/oxu210hp.h +++ /dev/null @@ -1,448 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Host interface registers - */ - -#define OXU_DEVICEID 0x00 - #define OXU_REV_MASK 0xffff0000 - #define OXU_REV_SHIFT 16 - #define OXU_REV_2100 0x2100 - #define OXU_BO_SHIFT 8 - #define OXU_BO_MASK (0x3 << OXU_BO_SHIFT) - #define OXU_MAJ_REV_SHIFT 4 - #define OXU_MAJ_REV_MASK (0xf << OXU_MAJ_REV_SHIFT) - #define OXU_MIN_REV_SHIFT 0 - #define OXU_MIN_REV_MASK (0xf << OXU_MIN_REV_SHIFT) -#define OXU_HOSTIFCONFIG 0x04 -#define OXU_SOFTRESET 0x08 - #define OXU_SRESET (1 << 0) - -#define OXU_PIOBURSTREADCTRL 0x0C - -#define OXU_CHIPIRQSTATUS 0x10 -#define OXU_CHIPIRQEN_SET 0x14 -#define OXU_CHIPIRQEN_CLR 0x18 - #define OXU_USBSPHLPWUI 0x00000080 - #define OXU_USBOTGLPWUI 0x00000040 - #define OXU_USBSPHI 0x00000002 - #define OXU_USBOTGI 0x00000001 - -#define OXU_CLKCTRL_SET 0x1C - #define OXU_SYSCLKEN 0x00000008 - #define OXU_USBSPHCLKEN 0x00000002 - #define OXU_USBOTGCLKEN 0x00000001 - -#define OXU_ASO 0x68 - #define OXU_SPHPOEN 0x00000100 - #define OXU_OVRCCURPUPDEN 0x00000800 - #define OXU_ASO_OP (1 << 10) - #define OXU_COMPARATOR 0x000004000 - -#define OXU_USBMODE 0x1A8 - #define OXU_VBPS 0x00000020 - #define OXU_ES_LITTLE 0x00000000 - #define OXU_CM_HOST_ONLY 0x00000003 - -/* - * Proper EHCI structs & defines - */ - -/* Magic numbers that can affect system performance */ -#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ -#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ -#define EHCI_TUNE_RL_TT 0 -#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ -#define EHCI_TUNE_MULT_TT 1 -#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ - -struct oxu_hcd; - -/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ - -/* Section 2.2 Host Controller Capability Registers */ -struct ehci_caps { - /* these fields are specified as 8 and 16 bit registers, - * but some hosts can't perform 8 or 16 bit PCI accesses. - */ - u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ - u32 hcs_params; /* HCSPARAMS - offset 0x4 */ -#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ -#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ -#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ -#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ -#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ -#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ - - u32 hcc_params; /* HCCPARAMS - offset 0x8 */ -#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ -#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ -#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ -#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ -#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ -#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ - u8 portroute[8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); - - -/* Section 2.3 Host Controller Operational Registers */ -struct ehci_regs { - /* USBCMD: offset 0x00 */ - u32 command; -/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ -#define CMD_PARK (1<<11) /* enable "park" on async qh */ -#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ -#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ -#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ -#define CMD_ASE (1<<5) /* async schedule enable */ -#define CMD_PSE (1<<4) /* periodic schedule enable */ -/* 3:2 is periodic frame list size */ -#define CMD_RESET (1<<1) /* reset HC not bus */ -#define CMD_RUN (1<<0) /* start/stop HC */ - - /* USBSTS: offset 0x04 */ - u32 status; -#define STS_ASS (1<<15) /* Async Schedule Status */ -#define STS_PSS (1<<14) /* Periodic Schedule Status */ -#define STS_RECL (1<<13) /* Reclamation */ -#define STS_HALT (1<<12) /* Not running (any reason) */ -/* some bits reserved */ - /* these STS_* flags are also intr_enable bits (USBINTR) */ -#define STS_IAA (1<<5) /* Interrupted on async advance */ -#define STS_FATAL (1<<4) /* such as some PCI access errors */ -#define STS_FLR (1<<3) /* frame list rolled over */ -#define STS_PCD (1<<2) /* port change detect */ -#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ -#define STS_INT (1<<0) /* "normal" completion (short, ...) */ - -#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) - - /* USBINTR: offset 0x08 */ - u32 intr_enable; - - /* FRINDEX: offset 0x0C */ - u32 frame_index; /* current microframe number */ - /* CTRLDSSEGMENT: offset 0x10 */ - u32 segment; /* address bits 63:32 if needed */ - /* PERIODICLISTBASE: offset 0x14 */ - u32 frame_list; /* points to periodic list */ - /* ASYNCLISTADDR: offset 0x18 */ - u32 async_next; /* address of next async queue head */ - - u32 reserved[9]; - - /* CONFIGFLAG: offset 0x40 */ - u32 configured_flag; -#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ - - /* PORTSC: offset 0x44 */ - u32 port_status[0]; /* up to N_PORTS */ -/* 31:23 reserved */ -#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ -#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ -#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ -/* 19:16 for port testing */ -#define PORT_LED_OFF (0<<14) -#define PORT_LED_AMBER (1<<14) -#define PORT_LED_GREEN (2<<14) -#define PORT_LED_MASK (3<<14) -#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ -#define PORT_POWER (1<<12) /* true: has power (see PPC) */ -#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ -/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ -/* 9 reserved */ -#define PORT_RESET (1<<8) /* reset port */ -#define PORT_SUSPEND (1<<7) /* suspend port */ -#define PORT_RESUME (1<<6) /* resume it */ -#define PORT_OCC (1<<5) /* over current change */ -#define PORT_OC (1<<4) /* over current active */ -#define PORT_PEC (1<<3) /* port enable change */ -#define PORT_PE (1<<2) /* port enable */ -#define PORT_CSC (1<<1) /* connect status change */ -#define PORT_CONNECT (1<<0) /* device connected */ -#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); - -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct ehci_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); - - -#define QTD_NEXT(dma) cpu_to_le32((u32)dma) - -/* - * EHCI Specification 0.95 Section 3.5 - * QTD: describe data transfer components (buffer, direction, ...) - * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". - * - * These are associated only with "QH" (Queue Head) structures, - * used with control, bulk, and interrupt transfers. - */ -struct ehci_qtd { - /* first part defined by EHCI spec */ - __le32 hw_next; /* see EHCI 3.5.1 */ - __le32 hw_alt_next; /* see EHCI 3.5.2 */ - __le32 hw_token; /* see EHCI 3.5.3 */ -#define QTD_TOGGLE (1 << 31) /* data toggle */ -#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) -#define QTD_IOC (1 << 15) /* interrupt on complete */ -#define QTD_CERR(tok) (((tok)>>10) & 0x3) -#define QTD_PID(tok) (((tok)>>8) & 0x3) -#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */ -#define QTD_STS_HALT (1 << 6) /* halted on error */ -#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */ -#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */ -#define QTD_STS_XACT (1 << 3) /* device gave illegal response */ -#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */ -#define QTD_STS_STS (1 << 1) /* split transaction state */ -#define QTD_STS_PING (1 << 0) /* issue PING? */ - __le32 hw_buf[5]; /* see EHCI 3.5.4 */ - __le32 hw_buf_hi[5]; /* Appendix B */ - - /* the rest is HCD-private */ - dma_addr_t qtd_dma; /* qtd address */ - struct list_head qtd_list; /* sw qtd list */ - struct urb *urb; /* qtd's urb */ - size_t length; /* length of buffer */ - - u32 qtd_buffer_len; - void *buffer; - dma_addr_t buffer_dma; - void *transfer_buffer; - void *transfer_dma; -} __attribute__ ((aligned(32))); - -/* mask NakCnt+T in qh->hw_alt_next */ -#define QTD_MASK cpu_to_le32 (~0x1f) - -#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1) - -/* Type tag from {qh, itd, sitd, fstn}->hw_next */ -#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1)) - -/* values for that type tag */ -#define Q_TYPE_QH cpu_to_le32 (1 << 1) - -/* next async queue entry, or pointer to interrupt/periodic QH */ -#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) - -/* for periodic/async schedules and qtd lists, mark end of list */ -#define EHCI_LIST_END cpu_to_le32(1) /* "null pointer" to hw */ - -/* - * Entries in periodic shadow table are pointers to one of four kinds - * of data structure. That's dictated by the hardware; a type tag is - * encoded in the low bits of the hardware's periodic schedule. Use - * Q_NEXT_TYPE to get the tag. - * - * For entries in the async schedule, the type tag always says "qh". - */ -union ehci_shadow { - struct ehci_qh *qh; /* Q_TYPE_QH */ - __le32 *hw_next; /* (all types) */ - void *ptr; -}; - -/* - * EHCI Specification 0.95 Section 3.6 - * QH: describes control/bulk/interrupt endpoints - * See Fig 3-7 "Queue Head Structure Layout". - * - * These appear in both the async and (for interrupt) periodic schedules. - */ - -struct ehci_qh { - /* first part defined by EHCI spec */ - __le32 hw_next; /* see EHCI 3.6.1 */ - __le32 hw_info1; /* see EHCI 3.6.2 */ -#define QH_HEAD 0x00008000 - __le32 hw_info2; /* see EHCI 3.6.2 */ -#define QH_SMASK 0x000000ff -#define QH_CMASK 0x0000ff00 -#define QH_HUBADDR 0x007f0000 -#define QH_HUBPORT 0x3f800000 -#define QH_MULT 0xc0000000 - __le32 hw_current; /* qtd list - see EHCI 3.6.4 */ - - /* qtd overlay (hardware parts of a struct ehci_qtd) */ - __le32 hw_qtd_next; - __le32 hw_alt_next; - __le32 hw_token; - __le32 hw_buf[5]; - __le32 hw_buf_hi[5]; - - /* the rest is HCD-private */ - dma_addr_t qh_dma; /* address of qh */ - union ehci_shadow qh_next; /* ptr to qh; or periodic */ - struct list_head qtd_list; /* sw qtd list */ - struct ehci_qtd *dummy; - struct ehci_qh *reclaim; /* next to reclaim */ - - struct oxu_hcd *oxu; - struct kref kref; - unsigned stamp; - - u8 qh_state; -#define QH_STATE_LINKED 1 /* HC sees this */ -#define QH_STATE_UNLINK 2 /* HC may still see this */ -#define QH_STATE_IDLE 3 /* HC doesn't see this */ -#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */ -#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ - - /* periodic schedule info */ - u8 usecs; /* intr bandwidth */ - u8 gap_uf; /* uframes split/csplit gap */ - u8 c_usecs; /* ... split completion bw */ - u16 tt_usecs; /* tt downstream bandwidth */ - unsigned short period; /* polling interval */ - unsigned short start; /* where polling starts */ -#define NO_FRAME ((unsigned short)~0) /* pick new start */ - struct usb_device *dev; /* access to TT */ -} __attribute__ ((aligned(32))); - -/* - * Proper OXU210HP structs - */ - -#define OXU_OTG_CORE_OFFSET 0x00400 -#define OXU_OTG_CAP_OFFSET (OXU_OTG_CORE_OFFSET + 0x100) -#define OXU_SPH_CORE_OFFSET 0x00800 -#define OXU_SPH_CAP_OFFSET (OXU_SPH_CORE_OFFSET + 0x100) - -#define OXU_OTG_MEM 0xE000 -#define OXU_SPH_MEM 0x16000 - -/* Only how many elements & element structure are specifies here. */ -/* 2 host controllers are enabled - total size <= 28 kbytes */ -#define DEFAULT_I_TDPS 1024 -#define QHEAD_NUM 16 -#define QTD_NUM 32 -#define SITD_NUM 8 -#define MURB_NUM 8 - -#define BUFFER_NUM 8 -#define BUFFER_SIZE 512 - -struct oxu_info { - struct usb_hcd *hcd[2]; -}; - -struct oxu_buf { - u8 buffer[BUFFER_SIZE]; -} __attribute__ ((aligned(BUFFER_SIZE))); - -struct oxu_onchip_mem { - struct oxu_buf db_pool[BUFFER_NUM]; - - u32 frame_list[DEFAULT_I_TDPS]; - struct ehci_qh qh_pool[QHEAD_NUM]; - struct ehci_qtd qtd_pool[QTD_NUM]; -} __attribute__ ((aligned(4 << 10))); - -#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ - -struct oxu_murb { - struct urb urb; - struct urb *main; - u8 last; -}; - -struct oxu_hcd { /* one per controller */ - unsigned int is_otg:1; - - u8 qh_used[QHEAD_NUM]; - u8 qtd_used[QTD_NUM]; - u8 db_used[BUFFER_NUM]; - u8 murb_used[MURB_NUM]; - - struct oxu_onchip_mem __iomem *mem; - spinlock_t mem_lock; - - struct timer_list urb_timer; - - struct ehci_caps __iomem *caps; - struct ehci_regs __iomem *regs; - - __u32 hcs_params; /* cached register copy */ - spinlock_t lock; - - /* async schedule support */ - struct ehci_qh *async; - struct ehci_qh *reclaim; - unsigned reclaim_ready:1; - unsigned scanning:1; - - /* periodic schedule support */ - unsigned periodic_size; - __le32 *periodic; /* hw periodic table */ - dma_addr_t periodic_dma; - unsigned i_thresh; /* uframes HC might cache */ - - union ehci_shadow *pshadow; /* mirror hw periodic table */ - int next_uframe; /* scan periodic, start here */ - unsigned periodic_sched; /* periodic activity count */ - - /* per root hub port */ - unsigned long reset_done[EHCI_MAX_ROOT_PORTS]; - /* bit vectors (one bit per port) */ - unsigned long bus_suspended; /* which ports were - * already suspended at the - * start of a bus suspend - */ - unsigned long companion_ports;/* which ports are dedicated - * to the companion controller - */ - - struct timer_list watchdog; - unsigned long actions; - unsigned stamp; - unsigned long next_statechange; - u32 command; - - /* SILICON QUIRKS */ - struct list_head urb_list; /* this is the head to urb - * queue that didn't get enough - * resources - */ - struct oxu_murb *murb_pool; /* murb per split big urb */ - unsigned urb_len; - - u8 sbrn; /* packed release number */ -}; - -#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */ -#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ -#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ -#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ - -enum ehci_timer_action { - TIMER_IO_WATCHDOG, - TIMER_IAA_WATCHDOG, - TIMER_ASYNC_SHRINK, - TIMER_ASYNC_OFF, -}; - -#include <linux/oxu210hp.h> diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 3ce71cbfbb58..f6d04491df60 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -132,7 +132,7 @@ static struct amd_chipset_info { struct amd_chipset_type sb_type; int isoc_reqs; int probe_count; - int probe_result; + bool need_pll_quirk; } amd_chipset; static DEFINE_SPINLOCK(amd_lock); @@ -201,11 +201,11 @@ void sb800_prefetch(struct device *dev, int on) } EXPORT_SYMBOL_GPL(sb800_prefetch); -int usb_amd_find_chipset_info(void) +static void usb_amd_find_chipset_info(void) { unsigned long flags; struct amd_chipset_info info; - int ret; + info.need_pll_quirk = 0; spin_lock_irqsave(&amd_lock, flags); @@ -213,27 +213,34 @@ int usb_amd_find_chipset_info(void) if (amd_chipset.probe_count > 0) { amd_chipset.probe_count++; spin_unlock_irqrestore(&amd_lock, flags); - return amd_chipset.probe_result; + return; } memset(&info, 0, sizeof(info)); spin_unlock_irqrestore(&amd_lock, flags); if (!amd_chipset_sb_type_init(&info)) { - ret = 0; goto commit; } - /* Below chipset generations needn't enable AMD PLL quirk */ - if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN || - info.sb_type.gen == AMD_CHIPSET_SB600 || - info.sb_type.gen == AMD_CHIPSET_YANGTZE || - (info.sb_type.gen == AMD_CHIPSET_SB700 && - info.sb_type.rev > 0x3b)) { + switch (info.sb_type.gen) { + case AMD_CHIPSET_SB700: + info.need_pll_quirk = info.sb_type.rev <= 0x3B; + break; + case AMD_CHIPSET_SB800: + case AMD_CHIPSET_HUDSON2: + case AMD_CHIPSET_BOLTON: + info.need_pll_quirk = 1; + break; + default: + info.need_pll_quirk = 0; + break; + } + + if (!info.need_pll_quirk) { if (info.smbus_dev) { pci_dev_put(info.smbus_dev); info.smbus_dev = NULL; } - ret = 0; goto commit; } @@ -252,7 +259,6 @@ int usb_amd_find_chipset_info(void) } } - ret = info.probe_result = 1; printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); commit: @@ -263,7 +269,6 @@ commit: /* Mark that we where here */ amd_chipset.probe_count++; - ret = amd_chipset.probe_result; spin_unlock_irqrestore(&amd_lock, flags); @@ -276,10 +281,7 @@ commit: amd_chipset = info; spin_unlock_irqrestore(&amd_lock, flags); } - - return ret; } -EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev) { @@ -315,6 +317,13 @@ bool usb_amd_prefetch_quirk(void) } EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk); +bool usb_amd_quirk_pll_check(void) +{ + usb_amd_find_chipset_info(); + return amd_chipset.need_pll_quirk; +} +EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check); + /* * The hardware normally enables the A-link power management feature, which * lets the system lower the power consumption in idle states. @@ -520,7 +529,7 @@ void usb_amd_dev_put(void) amd_chipset.nb_type = 0; memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type)); amd_chipset.isoc_reqs = 0; - amd_chipset.probe_result = 0; + amd_chipset.need_pll_quirk = 0; spin_unlock_irqrestore(&amd_lock, flags); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 63c633077d9e..e729de21fad7 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -5,11 +5,11 @@ #ifdef CONFIG_USB_PCI void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); -int usb_amd_find_chipset_info(void); int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev); bool usb_amd_hang_symptom_quirk(void); bool usb_amd_prefetch_quirk(void); void usb_amd_dev_put(void); +bool usb_amd_quirk_pll_check(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 42668aeca57c..0c03ac6b0213 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2411,12 +2411,6 @@ static int r8a66597_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; - if (pdev->dev.dma_mask) { - ret = -EINVAL; - dev_err(&pdev->dev, "dma not supported\n"); - goto clean_up; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { ret = -ENODEV; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5b061e599948..72a34a1eb618 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1632,12 +1632,6 @@ sl811h_probe(struct platform_device *dev) irq = ires->start; irqflags = ires->flags & IRQF_TRIGGER_MASK; - /* refuse to confuse usbcore */ - if (dev->dev.dma_mask) { - dev_dbg(&dev->dev, "no we won't dma\n"); - return -EINVAL; - } - /* the chip may be wired for either kind of addressing */ addr = platform_get_resource(dev, IORESOURCE_MEM, 0); data = platform_get_resource(dev, IORESOURCE_MEM, 1); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 400c40bc43a6..4efee34f154f 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3077,8 +3077,6 @@ static int u132_probe(struct platform_device *pdev) retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a); if (retval) return retval; - if (pdev->dev.dma_mask) - return -EINVAL; hcd = usb_create_hcd(&u132_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c index 2103b1ed0f8f..0a201a73b196 100644 --- a/drivers/usb/host/uhci-grlib.c +++ b/drivers/usb/host/uhci-grlib.c @@ -63,7 +63,7 @@ static const struct hc_driver uhci_grlib_hc_driver = { /* Generic hardware linkage */ .irq = uhci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, /* Basic lifecycle operations */ .reset = uhci_grlib_init, diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 0dd944277c99..0fa3d72bae26 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -261,7 +261,7 @@ static const struct hc_driver uhci_driver = { /* Generic hardware linkage */ .irq = uhci_irq, - .flags = HCD_USB11, + .flags = HCD_DMA | HCD_USB11, /* Basic lifecycle operations */ .reset = uhci_pci_init, diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 89700e26fb29..70dbd95c3f06 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -41,7 +41,7 @@ static const struct hc_driver uhci_platform_hc_driver = { /* Generic hardware linkage */ .irq = uhci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, /* Basic lifecycle operations */ .reset = uhci_platform_init, diff --git a/drivers/usb/host/whci/Makefile b/drivers/usb/host/whci/Makefile deleted file mode 100644 index 859d20079df6..000000000000 --- a/drivers/usb/host/whci/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o - -whci-hcd-y := \ - asl.o \ - debug.o \ - hcd.o \ - hw.o \ - init.o \ - int.o \ - pzl.o \ - qset.o \ - wusb.o diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c deleted file mode 100644 index 276fb34c8efd..000000000000 --- a/drivers/usb/host/whci/asl.c +++ /dev/null @@ -1,376 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) asynchronous schedule management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> -#include <linux/usb.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset, - struct whc_qset **next, struct whc_qset **prev) -{ - struct list_head *n, *p; - - BUG_ON(list_empty(&whc->async_list)); - - n = qset->list_node.next; - if (n == &whc->async_list) - n = n->next; - p = qset->list_node.prev; - if (p == &whc->async_list) - p = p->prev; - - *next = container_of(n, struct whc_qset, list_node); - *prev = container_of(p, struct whc_qset, list_node); - -} - -static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset) -{ - list_move(&qset->list_node, &whc->async_list); - qset->in_sw_list = true; -} - -static void asl_qset_insert(struct whc *whc, struct whc_qset *qset) -{ - struct whc_qset *next, *prev; - - qset_clear(whc, qset); - - /* Link into ASL. */ - qset_get_next_prev(whc, qset, &next, &prev); - whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma); - whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma); - qset->in_hw_list = true; -} - -static void asl_qset_remove(struct whc *whc, struct whc_qset *qset) -{ - struct whc_qset *prev, *next; - - qset_get_next_prev(whc, qset, &next, &prev); - - list_move(&qset->list_node, &whc->async_removed_list); - qset->in_sw_list = false; - - /* - * No more qsets in the ASL? The caller must stop the ASL as - * it's no longer valid. - */ - if (list_empty(&whc->async_list)) - return; - - /* Remove from ASL. */ - whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma); - qset->in_hw_list = false; -} - -/** - * process_qset - process any recently inactivated or halted qTDs in a - * qset. - * - * After inactive qTDs are removed, new qTDs can be added if the - * urb queue still contains URBs. - * - * Returns any additional WUSBCMD bits for the ASL sync command (i.e., - * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed). - */ -static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) -{ - enum whc_update update = 0; - uint32_t status = 0; - - while (qset->ntds) { - struct whc_qtd *td; - - td = &qset->qtd[qset->td_start]; - status = le32_to_cpu(td->status); - - /* - * Nothing to do with a still active qTD. - */ - if (status & QTD_STS_ACTIVE) - break; - - if (status & QTD_STS_HALTED) { - /* Ug, an error. */ - process_halted_qtd(whc, qset, td); - /* A halted qTD always triggers an update - because the qset was either removed or - reactivated. */ - update |= WHC_UPDATE_UPDATED; - goto done; - } - - /* Mmm, a completed qTD. */ - process_inactive_qtd(whc, qset, td); - } - - if (!qset->remove) - update |= qset_add_qtds(whc, qset); - -done: - /* - * Remove this qset from the ASL if requested, but only if has - * no qTDs. - */ - if (qset->remove && qset->ntds == 0) { - asl_qset_remove(whc, qset); - update |= WHC_UPDATE_REMOVED; - } - return update; -} - -void asl_start(struct whc *whc) -{ - struct whc_qset *qset; - - qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); - - le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR); - - whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED, - 1000, "start ASL"); -} - -void asl_stop(struct whc *whc) -{ - whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_ASYNC_SCHED, 0, - 1000, "stop ASL"); -} - -/** - * asl_update - request an ASL update and wait for the hardware to be synced - * @whc: the WHCI HC - * @wusbcmd: WUSBCMD value to start the update. - * - * If the WUSB HC is inactive (i.e., the ASL is stopped) then the - * update must be skipped as the hardware may not respond to update - * requests. - */ -void asl_update(struct whc *whc, uint32_t wusbcmd) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - long t; - - mutex_lock(&wusbhc->mutex); - if (wusbhc->active) { - whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - t = wait_event_timeout( - whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, - msecs_to_jiffies(1000)); - if (t == 0) - whc_hw_error(whc, "ASL update timeout"); - } - mutex_unlock(&wusbhc->mutex); -} - -/** - * scan_async_work - scan the ASL for qsets to process. - * - * Process each qset in the ASL in turn and then signal the WHC that - * the ASL has been updated. - * - * Then start, stop or update the asynchronous schedule as required. - */ -void scan_async_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, async_work); - struct whc_qset *qset, *t; - enum whc_update update = 0; - - spin_lock_irq(&whc->lock); - - /* - * Transerve the software list backwards so new qsets can be - * safely inserted into the ASL without making it non-circular. - */ - list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) { - if (!qset->in_hw_list) { - asl_qset_insert(whc, qset); - update |= WHC_UPDATE_ADDED; - } - - update |= process_qset(whc, qset); - } - - spin_unlock_irq(&whc->lock); - - if (update) { - uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB; - if (update & WHC_UPDATE_REMOVED) - wusbcmd |= WUSBCMD_ASYNC_QSET_RM; - asl_update(whc, wusbcmd); - } - - /* - * Now that the ASL is updated, complete the removal of any - * removed qsets. - * - * If the qset was to be reset, do so and reinsert it into the - * ASL if it has pending transfers. - */ - spin_lock_irq(&whc->lock); - - list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { - qset_remove_complete(whc, qset); - if (qset->reset) { - qset_reset(whc, qset); - if (!list_empty(&qset->stds)) { - asl_qset_insert_begin(whc, qset); - queue_work(whc->workqueue, &whc->async_work); - } - } - } - - spin_unlock_irq(&whc->lock); -} - -/** - * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL). - * @whc: the WHCI host controller - * @urb: the URB to enqueue - * @mem_flags: flags for any memory allocations - * - * The qset for the endpoint is obtained and the urb queued on to it. - * - * Work is scheduled to update the hardware's view of the ASL. - */ -int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) -{ - struct whc_qset *qset; - int err; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); - if (err < 0) { - spin_unlock_irqrestore(&whc->lock, flags); - return err; - } - - qset = get_qset(whc, urb, GFP_ATOMIC); - if (qset == NULL) - err = -ENOMEM; - else - err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); - if (!err) { - if (!qset->in_sw_list && !qset->remove) - asl_qset_insert_begin(whc, qset); - } else - usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); - - spin_unlock_irqrestore(&whc->lock, flags); - - if (!err) - queue_work(whc->workqueue, &whc->async_work); - - return err; -} - -/** - * asl_urb_dequeue - remove an URB (qset) from the async list. - * @whc: the WHCI host controller - * @urb: the URB to dequeue - * @status: the current status of the URB - * - * URBs that do yet have qTDs can simply be removed from the software - * queue, otherwise the qset must be removed from the ASL so the qTDs - * can be removed. - */ -int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) -{ - struct whc_urb *wurb = urb->hcpriv; - struct whc_qset *qset = wurb->qset; - struct whc_std *std, *t; - bool has_qtd = false; - int ret; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); - if (ret < 0) - goto out; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) { - if (std->qtd) - has_qtd = true; - qset_free_std(whc, std); - } else - std->qtd = NULL; /* so this std is re-added when the qset is */ - } - - if (has_qtd) { - asl_qset_remove(whc, qset); - wurb->status = status; - wurb->is_async = true; - queue_work(whc->workqueue, &wurb->dequeue_work); - } else - qset_remove_urb(whc, qset, urb, status); -out: - spin_unlock_irqrestore(&whc->lock, flags); - - return ret; -} - -/** - * asl_qset_delete - delete a qset from the ASL - */ -void asl_qset_delete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 1; - queue_work(whc->workqueue, &whc->async_work); - qset_delete(whc, qset); -} - -/** - * asl_init - initialize the asynchronous schedule list - * - * A dummy qset with no qTDs is added to the ASL to simplify removing - * qsets (no need to stop the ASL when the last qset is removed). - */ -int asl_init(struct whc *whc) -{ - struct whc_qset *qset; - - qset = qset_alloc(whc, GFP_KERNEL); - if (qset == NULL) - return -ENOMEM; - - asl_qset_insert_begin(whc, qset); - asl_qset_insert(whc, qset); - - return 0; -} - -/** - * asl_clean_up - free ASL resources - * - * The ASL is stopped and empty except for the dummy qset. - */ -void asl_clean_up(struct whc *whc) -{ - struct whc_qset *qset; - - if (!list_empty(&whc->async_list)) { - qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); - list_del(&qset->list_node); - qset_free(whc, qset); - } -} diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c deleted file mode 100644 index 8ddfe3f1f693..000000000000 --- a/drivers/usb/host/whci/debug.c +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) debug. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/export.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -struct whc_dbg { - struct dentry *di_f; - struct dentry *asl_f; - struct dentry *pzl_f; -}; - -static void qset_print(struct seq_file *s, struct whc_qset *qset) -{ - static const char *qh_type[] = { - "ctrl", "isoc", "bulk", "intr", "rsvd", "rsvd", "rsvd", "lpintr", }; - struct whc_std *std; - struct urb *urb = NULL; - int i; - - seq_printf(s, "qset %08x", (u32)qset->qset_dma); - if (&qset->list_node == qset->whc->async_list.prev) { - seq_printf(s, " (dummy)\n"); - } else { - seq_printf(s, " ep%d%s-%s maxpkt: %d\n", - qset->qh.info1 & 0x0f, - (qset->qh.info1 >> 4) & 0x1 ? "in" : "out", - qh_type[(qset->qh.info1 >> 5) & 0x7], - (qset->qh.info1 >> 16) & 0xffff); - } - seq_printf(s, " -> %08x\n", (u32)qset->qh.link); - seq_printf(s, " info: %08x %08x %08x\n", - qset->qh.info1, qset->qh.info2, qset->qh.info3); - seq_printf(s, " sts: %04x errs: %d curwin: %08x\n", - qset->qh.status, qset->qh.err_count, qset->qh.cur_window); - seq_printf(s, " TD: sts: %08x opts: %08x\n", - qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options); - - for (i = 0; i < WHCI_QSET_TD_MAX; i++) { - seq_printf(s, " %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n", - i == qset->td_start ? 'S' : ' ', - i == qset->td_end ? 'E' : ' ', - i, qset->qtd[i].status, qset->qtd[i].options, - (u32)qset->qtd[i].page_list_ptr); - } - seq_printf(s, " ntds: %d\n", qset->ntds); - list_for_each_entry(std, &qset->stds, list_node) { - if (urb != std->urb) { - urb = std->urb; - seq_printf(s, " urb %p transferred: %d bytes\n", urb, - urb->actual_length); - } - if (std->qtd) - seq_printf(s, " sTD[%td]: %zu bytes @ %08x\n", - std->qtd - &qset->qtd[0], - std->len, std->num_pointers ? - (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); - else - seq_printf(s, " sTD[-]: %zd bytes @ %08x\n", - std->len, std->num_pointers ? - (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); - } -} - -static int di_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - int d; - - for (d = 0; d < whc->n_devices; d++) { - struct di_buf_entry *di = &whc->di_buf[d]; - - seq_printf(s, "DI[%d]\n", d); - seq_printf(s, " availability: %*pb\n", - UWB_NUM_MAS, (unsigned long *)di->availability_info); - seq_printf(s, " %c%c key idx: %d dev addr: %d\n", - (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ', - (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ', - (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8, - (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK)); - } - return 0; -} -DEFINE_SHOW_ATTRIBUTE(di); - -static int asl_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - struct whc_qset *qset; - - list_for_each_entry(qset, &whc->async_list, list_node) { - qset_print(s, qset); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(asl); - -static int pzl_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - struct whc_qset *qset; - int period; - - for (period = 0; period < 5; period++) { - seq_printf(s, "Period %d\n", period); - list_for_each_entry(qset, &whc->periodic_list[period], list_node) { - qset_print(s, qset); - } - } - return 0; -} -DEFINE_SHOW_ATTRIBUTE(pzl); - -void whc_dbg_init(struct whc *whc) -{ - if (whc->wusbhc.pal.debugfs_dir == NULL) - return; - - whc->dbg = kzalloc(sizeof(struct whc_dbg), GFP_KERNEL); - if (whc->dbg == NULL) - return; - - whc->dbg->di_f = debugfs_create_file("di", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &di_fops); - whc->dbg->asl_f = debugfs_create_file("asl", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &asl_fops); - whc->dbg->pzl_f = debugfs_create_file("pzl", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &pzl_fops); -} - -void whc_dbg_clean_up(struct whc *whc) -{ - if (whc->dbg) { - debugfs_remove(whc->dbg->pzl_f); - debugfs_remove(whc->dbg->asl_f); - debugfs_remove(whc->dbg->di_f); - kfree(whc->dbg); - } -} diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c deleted file mode 100644 index 8af9dcfea127..000000000000 --- a/drivers/usb/host/whci/hcd.c +++ /dev/null @@ -1,356 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) driver. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -/* - * One time initialization. - * - * Nothing to do here. - */ -static int whc_reset(struct usb_hcd *usb_hcd) -{ - return 0; -} - -/* - * Start the wireless host controller. - * - * Start device notification. - * - * Put hc into run state, set DNTS parameters. - */ -static int whc_start(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - u8 bcid; - int ret; - - mutex_lock(&wusbhc->mutex); - - le_writel(WUSBINTR_GEN_CMD_DONE - | WUSBINTR_HOST_ERR - | WUSBINTR_ASYNC_SCHED_SYNCED - | WUSBINTR_DNTS_INT - | WUSBINTR_ERR_INT - | WUSBINTR_INT, - whc->base + WUSBINTR); - - /* set cluster ID */ - bcid = wusb_cluster_id_get(); - ret = whc_set_cluster_id(whc, bcid); - if (ret < 0) - goto out; - wusbhc->cluster_id = bcid; - - /* start HC */ - whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); - - usb_hcd->uses_new_polling = 1; - set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); - usb_hcd->state = HC_STATE_RUNNING; - -out: - mutex_unlock(&wusbhc->mutex); - return ret; -} - - -/* - * Stop the wireless host controller. - * - * Stop device notification. - * - * Wait for pending transfer to stop? Put hc into stop state? - */ -static void whc_stop(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - - mutex_lock(&wusbhc->mutex); - - /* stop HC */ - le_writel(0, whc->base + WUSBINTR); - whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, - 100, "HC to halt"); - - wusb_cluster_id_put(wusbhc->cluster_id); - - mutex_unlock(&wusbhc->mutex); -} - -static int whc_get_frame_number(struct usb_hcd *usb_hcd) -{ - /* Frame numbers are not applicable to WUSB. */ - return -ENOSYS; -} - - -/* - * Queue an URB to the ASL or PZL - */ -static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, - gfp_t mem_flags) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_INTERRUPT: - ret = pzl_urb_enqueue(whc, urb, mem_flags); - break; - case PIPE_ISOCHRONOUS: - dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); - ret = -ENOTSUPP; - break; - case PIPE_CONTROL: - case PIPE_BULK: - default: - ret = asl_urb_enqueue(whc, urb, mem_flags); - break; - } - - return ret; -} - -/* - * Remove a queued URB from the ASL or PZL. - */ -static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_INTERRUPT: - ret = pzl_urb_dequeue(whc, urb, status); - break; - case PIPE_ISOCHRONOUS: - ret = -ENOTSUPP; - break; - case PIPE_CONTROL: - case PIPE_BULK: - default: - ret = asl_urb_dequeue(whc, urb, status); - break; - } - - return ret; -} - -/* - * Wait for all URBs to the endpoint to be completed, then delete the - * qset. - */ -static void whc_endpoint_disable(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - struct whc_qset *qset; - - qset = ep->hcpriv; - if (qset) { - ep->hcpriv = NULL; - if (usb_endpoint_xfer_bulk(&ep->desc) - || usb_endpoint_xfer_control(&ep->desc)) - asl_qset_delete(whc, qset); - else - pzl_qset_delete(whc, qset); - } -} - -static void whc_endpoint_reset(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - struct whc_qset *qset; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - qset = ep->hcpriv; - if (qset) { - qset->remove = 1; - qset->reset = 1; - - if (usb_endpoint_xfer_bulk(&ep->desc) - || usb_endpoint_xfer_control(&ep->desc)) - queue_work(whc->workqueue, &whc->async_work); - else - queue_work(whc->workqueue, &whc->periodic_work); - } - - spin_unlock_irqrestore(&whc->lock, flags); -} - - -static const struct hc_driver whc_hc_driver = { - .description = "whci-hcd", - .product_desc = "Wireless host controller", - .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), - .irq = whc_int_handler, - .flags = HCD_USB2, - - .reset = whc_reset, - .start = whc_start, - .stop = whc_stop, - .get_frame_number = whc_get_frame_number, - .urb_enqueue = whc_urb_enqueue, - .urb_dequeue = whc_urb_dequeue, - .endpoint_disable = whc_endpoint_disable, - .endpoint_reset = whc_endpoint_reset, - - .hub_status_data = wusbhc_rh_status_data, - .hub_control = wusbhc_rh_control, - .start_port_reset = wusbhc_rh_start_port_reset, -}; - -static int whc_probe(struct umc_dev *umc) -{ - int ret; - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct whc *whc; - struct device *dev = &umc->dev; - - usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); - if (usb_hcd == NULL) { - dev_err(dev, "unable to create hcd\n"); - return -ENOMEM; - } - - usb_hcd->wireless = 1; - usb_hcd->self.sg_tablesize = 2048; /* somewhat arbitrary */ - - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - whc = wusbhc_to_whc(wusbhc); - whc->umc = umc; - - ret = whc_init(whc); - if (ret) - goto error_whc_init; - - wusbhc->dev = dev; - wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); - if (!wusbhc->uwb_rc) { - ret = -ENODEV; - dev_err(dev, "cannot get radio controller\n"); - goto error_uwb_rc; - } - - if (whc->n_devices > USB_MAXCHILDREN) { - dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", - whc->n_devices); - wusbhc->ports_max = USB_MAXCHILDREN; - } else - wusbhc->ports_max = whc->n_devices; - wusbhc->mmcies_max = whc->n_mmc_ies; - wusbhc->start = whc_wusbhc_start; - wusbhc->stop = whc_wusbhc_stop; - wusbhc->mmcie_add = whc_mmcie_add; - wusbhc->mmcie_rm = whc_mmcie_rm; - wusbhc->dev_info_set = whc_dev_info_set; - wusbhc->bwa_set = whc_bwa_set; - wusbhc->set_num_dnts = whc_set_num_dnts; - wusbhc->set_ptk = whc_set_ptk; - wusbhc->set_gtk = whc_set_gtk; - - ret = wusbhc_create(wusbhc); - if (ret) - goto error_wusbhc_create; - - ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "cannot add HCD: %d\n", ret); - goto error_usb_add_hcd; - } - device_wakeup_enable(usb_hcd->self.controller); - - ret = wusbhc_b_create(wusbhc); - if (ret) { - dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); - goto error_wusbhc_b_create; - } - - whc_dbg_init(whc); - - return 0; - -error_wusbhc_b_create: - usb_remove_hcd(usb_hcd); -error_usb_add_hcd: - wusbhc_destroy(wusbhc); -error_wusbhc_create: - uwb_rc_put(wusbhc->uwb_rc); -error_uwb_rc: - whc_clean_up(whc); -error_whc_init: - usb_put_hcd(usb_hcd); - return ret; -} - - -static void whc_remove(struct umc_dev *umc) -{ - struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - - if (usb_hcd) { - whc_dbg_clean_up(whc); - wusbhc_b_destroy(wusbhc); - usb_remove_hcd(usb_hcd); - wusbhc_destroy(wusbhc); - uwb_rc_put(wusbhc->uwb_rc); - whc_clean_up(whc); - usb_put_hcd(usb_hcd); - } -} - -static struct umc_driver whci_hc_driver = { - .name = "whci-hcd", - .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, - .probe = whc_probe, - .remove = whc_remove, -}; - -static int __init whci_hc_driver_init(void) -{ - return umc_driver_register(&whci_hc_driver); -} -module_init(whci_hc_driver_init); - -static void __exit whci_hc_driver_exit(void) -{ - umc_driver_unregister(&whci_hc_driver); -} -module_exit(whci_hc_driver_exit); - -/* PCI device ID's that we handle (so it gets loaded) */ -static struct pci_device_id __used whci_hcd_id_table[] = { - { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, - { /* empty last entry */ } -}; -MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); - -MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); -MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c deleted file mode 100644 index 22b3b7f7419d..000000000000 --- a/drivers/usb/host/whci/hw.c +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) hardware access helpers. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val) -{ - unsigned long flags; - u32 cmd; - - spin_lock_irqsave(&whc->lock, flags); - - cmd = le_readl(whc->base + WUSBCMD); - cmd = (cmd & ~mask) | val; - le_writel(cmd, whc->base + WUSBCMD); - - spin_unlock_irqrestore(&whc->lock, flags); -} - -/** - * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register - * @whc: the WHCI HC - * @cmd: command to start. - * @params: parameters for the command (the WUSBGENCMDPARAMS register value). - * @addr: pointer to any data for the command (may be NULL). - * @len: length of the data (if any). - */ -int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len) -{ - unsigned long flags; - dma_addr_t dma_addr; - int t; - int ret = 0; - - mutex_lock(&whc->mutex); - - /* Wait for previous command to complete. */ - t = wait_event_timeout(whc->cmd_wq, - (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0, - WHC_GENCMD_TIMEOUT_MS); - if (t == 0) { - dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n", - le_readl(whc->base + WUSBGENCMDSTS), - le_readl(whc->base + WUSBGENCMDPARAMS)); - ret = -ETIMEDOUT; - goto out; - } - - if (addr) { - memcpy(whc->gen_cmd_buf, addr, len); - dma_addr = whc->gen_cmd_buf_dma; - } else - dma_addr = 0; - - /* Poke registers to start cmd. */ - spin_lock_irqsave(&whc->lock, flags); - - le_writel(params, whc->base + WUSBGENCMDPARAMS); - le_writeq(dma_addr, whc->base + WUSBGENADDR); - - le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd, - whc->base + WUSBGENCMDSTS); - - spin_unlock_irqrestore(&whc->lock, flags); -out: - mutex_unlock(&whc->mutex); - - return ret; -} - -/** - * whc_hw_error - recover from a hardware error - * @whc: the WHCI HC that broke. - * @reason: a description of the failure. - * - * Recover from broken hardware with a full reset. - */ -void whc_hw_error(struct whc *whc, const char *reason) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - - dev_err(&whc->umc->dev, "hardware error: %s\n", reason); - wusbhc_reset_all(wusbhc); -} diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c deleted file mode 100644 index 82416973f773..000000000000 --- a/drivers/usb/host/whci/init.c +++ /dev/null @@ -1,177 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) initialization. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -/* - * Reset the host controller. - */ -static void whc_hw_reset(struct whc *whc) -{ - le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD); - whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0, - 100, "reset"); -} - -static void whc_hw_init_di_buf(struct whc *whc) -{ - int d; - - /* Disable all entries in the Device Information buffer. */ - for (d = 0; d < whc->n_devices; d++) - whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE; - - le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR); -} - -static void whc_hw_init_dn_buf(struct whc *whc) -{ - /* Clear the Device Notification buffer to ensure the V (valid) - * bits are clear. */ - memset(whc->dn_buf, 0, 4096); - - le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR); -} - -int whc_init(struct whc *whc) -{ - u32 whcsparams; - int ret, i; - resource_size_t start, len; - - spin_lock_init(&whc->lock); - mutex_init(&whc->mutex); - init_waitqueue_head(&whc->cmd_wq); - init_waitqueue_head(&whc->async_list_wq); - init_waitqueue_head(&whc->periodic_list_wq); - whc->workqueue = alloc_ordered_workqueue(dev_name(&whc->umc->dev), 0); - if (whc->workqueue == NULL) { - ret = -ENOMEM; - goto error; - } - INIT_WORK(&whc->dn_work, whc_dn_work); - - INIT_WORK(&whc->async_work, scan_async_work); - INIT_LIST_HEAD(&whc->async_list); - INIT_LIST_HEAD(&whc->async_removed_list); - - INIT_WORK(&whc->periodic_work, scan_periodic_work); - for (i = 0; i < 5; i++) - INIT_LIST_HEAD(&whc->periodic_list[i]); - INIT_LIST_HEAD(&whc->periodic_removed_list); - - /* Map HC registers. */ - start = whc->umc->resource.start; - len = whc->umc->resource.end - start + 1; - if (!request_mem_region(start, len, "whci-hc")) { - dev_err(&whc->umc->dev, "can't request HC region\n"); - ret = -EBUSY; - goto error; - } - whc->base_phys = start; - whc->base = ioremap(start, len); - if (!whc->base) { - dev_err(&whc->umc->dev, "ioremap\n"); - ret = -ENOMEM; - goto error; - } - - whc_hw_reset(whc); - - /* Read maximum number of devices, keys and MMC IEs. */ - whcsparams = le_readl(whc->base + WHCSPARAMS); - whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams); - whc->n_keys = WHCSPARAMS_TO_N_KEYS(whcsparams); - whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams); - - dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n", - whc->n_devices, whc->n_keys, whc->n_mmc_ies); - - whc->qset_pool = dma_pool_create("qset", &whc->umc->dev, - sizeof(struct whc_qset), 64, 0); - if (whc->qset_pool == NULL) { - ret = -ENOMEM; - goto error; - } - - ret = asl_init(whc); - if (ret < 0) - goto error; - ret = pzl_init(whc); - if (ret < 0) - goto error; - - /* Allocate and initialize a buffer for generic commands, the - Device Information buffer, and the Device Notification - buffer. */ - - whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, - &whc->gen_cmd_buf_dma, GFP_KERNEL); - if (whc->gen_cmd_buf == NULL) { - ret = -ENOMEM; - goto error; - } - - whc->dn_buf = dma_alloc_coherent(&whc->umc->dev, - sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, - &whc->dn_buf_dma, GFP_KERNEL); - if (!whc->dn_buf) { - ret = -ENOMEM; - goto error; - } - whc_hw_init_dn_buf(whc); - - whc->di_buf = dma_alloc_coherent(&whc->umc->dev, - sizeof(struct di_buf_entry) * whc->n_devices, - &whc->di_buf_dma, GFP_KERNEL); - if (!whc->di_buf) { - ret = -ENOMEM; - goto error; - } - whc_hw_init_di_buf(whc); - - return 0; - -error: - whc_clean_up(whc); - return ret; -} - -void whc_clean_up(struct whc *whc) -{ - resource_size_t len; - - if (whc->di_buf) - dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices, - whc->di_buf, whc->di_buf_dma); - if (whc->dn_buf) - dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, - whc->dn_buf, whc->dn_buf_dma); - if (whc->gen_cmd_buf) - dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, - whc->gen_cmd_buf, whc->gen_cmd_buf_dma); - - pzl_clean_up(whc); - asl_clean_up(whc); - - dma_pool_destroy(whc->qset_pool); - - len = resource_size(&whc->umc->resource); - if (whc->base) - iounmap(whc->base); - if (whc->base_phys) - release_mem_region(whc->base_phys, len); - - if (whc->workqueue) - destroy_workqueue(whc->workqueue); -} diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c deleted file mode 100644 index 7e4ad1b8f3e3..000000000000 --- a/drivers/usb/host/whci/int.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) interrupt handling. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static void transfer_done(struct whc *whc) -{ - queue_work(whc->workqueue, &whc->async_work); - queue_work(whc->workqueue, &whc->periodic_work); -} - -irqreturn_t whc_int_handler(struct usb_hcd *hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 sts; - - sts = le_readl(whc->base + WUSBSTS); - if (!(sts & WUSBSTS_INT_MASK)) - return IRQ_NONE; - le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS); - - if (sts & WUSBSTS_GEN_CMD_DONE) - wake_up(&whc->cmd_wq); - - if (sts & WUSBSTS_HOST_ERR) - dev_err(&whc->umc->dev, "FIXME: host system error\n"); - - if (sts & WUSBSTS_ASYNC_SCHED_SYNCED) - wake_up(&whc->async_list_wq); - - if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED) - wake_up(&whc->periodic_list_wq); - - if (sts & WUSBSTS_DNTS_INT) - queue_work(whc->workqueue, &whc->dn_work); - - /* - * A transfer completed (see [WHCI] section 4.7.1.2 for when - * this occurs). - */ - if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT)) - transfer_done(whc); - - return IRQ_HANDLED; -} - -static int process_dn_buf(struct whc *whc) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - struct dn_buf_entry *dn; - int processed = 0; - - for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) { - if (dn->status & WHC_DN_STATUS_VALID) { - wusbhc_handle_dn(wusbhc, dn->src_addr, - (struct wusb_dn_hdr *)dn->dn_data, - dn->msg_size); - dn->status &= ~WHC_DN_STATUS_VALID; - processed++; - } - } - return processed; -} - -void whc_dn_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, dn_work); - int processed; - - do { - processed = process_dn_buf(whc); - } while (processed); -} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c deleted file mode 100644 index ef52aeb02fde..000000000000 --- a/drivers/usb/host/whci/pzl.c +++ /dev/null @@ -1,404 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) periodic schedule management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> -#include <linux/usb.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static void update_pzl_pointers(struct whc *whc, int period, u64 addr) -{ - switch (period) { - case 0: - whc_qset_set_link_ptr(&whc->pz_list[0], addr); - whc_qset_set_link_ptr(&whc->pz_list[2], addr); - whc_qset_set_link_ptr(&whc->pz_list[4], addr); - whc_qset_set_link_ptr(&whc->pz_list[6], addr); - whc_qset_set_link_ptr(&whc->pz_list[8], addr); - whc_qset_set_link_ptr(&whc->pz_list[10], addr); - whc_qset_set_link_ptr(&whc->pz_list[12], addr); - whc_qset_set_link_ptr(&whc->pz_list[14], addr); - break; - case 1: - whc_qset_set_link_ptr(&whc->pz_list[1], addr); - whc_qset_set_link_ptr(&whc->pz_list[5], addr); - whc_qset_set_link_ptr(&whc->pz_list[9], addr); - whc_qset_set_link_ptr(&whc->pz_list[13], addr); - break; - case 2: - whc_qset_set_link_ptr(&whc->pz_list[3], addr); - whc_qset_set_link_ptr(&whc->pz_list[11], addr); - break; - case 3: - whc_qset_set_link_ptr(&whc->pz_list[7], addr); - break; - case 4: - whc_qset_set_link_ptr(&whc->pz_list[15], addr); - break; - } -} - -/* - * Return the 'period' to use for this qset. The minimum interval for - * the endpoint is used so whatever urbs are submitted the device is - * polled often enough. - */ -static int qset_get_period(struct whc *whc, struct whc_qset *qset) -{ - uint8_t bInterval = qset->ep->desc.bInterval; - - if (bInterval < 6) - bInterval = 6; - if (bInterval > 10) - bInterval = 10; - return bInterval - 6; -} - -static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset) -{ - int period; - - period = qset_get_period(whc, qset); - - qset_clear(whc, qset); - list_move(&qset->list_node, &whc->periodic_list[period]); - qset->in_sw_list = true; -} - -static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset) -{ - list_move(&qset->list_node, &whc->periodic_removed_list); - qset->in_hw_list = false; - qset->in_sw_list = false; -} - -/** - * pzl_process_qset - process any recently inactivated or halted qTDs - * in a qset. - * - * After inactive qTDs are removed, new qTDs can be added if the - * urb queue still contains URBs. - * - * Returns the schedule updates required. - */ -static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) -{ - enum whc_update update = 0; - uint32_t status = 0; - - while (qset->ntds) { - struct whc_qtd *td; - - td = &qset->qtd[qset->td_start]; - status = le32_to_cpu(td->status); - - /* - * Nothing to do with a still active qTD. - */ - if (status & QTD_STS_ACTIVE) - break; - - if (status & QTD_STS_HALTED) { - /* Ug, an error. */ - process_halted_qtd(whc, qset, td); - /* A halted qTD always triggers an update - because the qset was either removed or - reactivated. */ - update |= WHC_UPDATE_UPDATED; - goto done; - } - - /* Mmm, a completed qTD. */ - process_inactive_qtd(whc, qset, td); - } - - if (!qset->remove) - update |= qset_add_qtds(whc, qset); - -done: - /* - * If there are no qTDs in this qset, remove it from the PZL. - */ - if (qset->remove && qset->ntds == 0) { - pzl_qset_remove(whc, qset); - update |= WHC_UPDATE_REMOVED; - } - - return update; -} - -/** - * pzl_start - start the periodic schedule - * @whc: the WHCI host controller - * - * The PZL must be valid (e.g., all entries in the list should have - * the T bit set). - */ -void pzl_start(struct whc *whc) -{ - le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); - - whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED, - 1000, "start PZL"); -} - -/** - * pzl_stop - stop the periodic schedule - * @whc: the WHCI host controller - */ -void pzl_stop(struct whc *whc) -{ - whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_PERIODIC_SCHED, 0, - 1000, "stop PZL"); -} - -/** - * pzl_update - request a PZL update and wait for the hardware to be synced - * @whc: the WHCI HC - * @wusbcmd: WUSBCMD value to start the update. - * - * If the WUSB HC is inactive (i.e., the PZL is stopped) then the - * update must be skipped as the hardware may not respond to update - * requests. - */ -void pzl_update(struct whc *whc, uint32_t wusbcmd) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - long t; - - mutex_lock(&wusbhc->mutex); - if (wusbhc->active) { - whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - t = wait_event_timeout( - whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, - msecs_to_jiffies(1000)); - if (t == 0) - whc_hw_error(whc, "PZL update timeout"); - } - mutex_unlock(&wusbhc->mutex); -} - -static void update_pzl_hw_view(struct whc *whc) -{ - struct whc_qset *qset, *t; - int period; - u64 tmp_qh = 0; - - for (period = 0; period < 5; period++) { - list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { - whc_qset_set_link_ptr(&qset->qh.link, tmp_qh); - tmp_qh = qset->qset_dma; - qset->in_hw_list = true; - } - update_pzl_pointers(whc, period, tmp_qh); - } -} - -/** - * scan_periodic_work - scan the PZL for qsets to process. - * - * Process each qset in the PZL in turn and then signal the WHC that - * the PZL has been updated. - * - * Then start, stop or update the periodic schedule as required. - */ -void scan_periodic_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, periodic_work); - struct whc_qset *qset, *t; - enum whc_update update = 0; - int period; - - spin_lock_irq(&whc->lock); - - for (period = 4; period >= 0; period--) { - list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { - if (!qset->in_hw_list) - update |= WHC_UPDATE_ADDED; - update |= pzl_process_qset(whc, qset); - } - } - - if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED)) - update_pzl_hw_view(whc); - - spin_unlock_irq(&whc->lock); - - if (update) { - uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB; - if (update & WHC_UPDATE_REMOVED) - wusbcmd |= WUSBCMD_PERIODIC_QSET_RM; - pzl_update(whc, wusbcmd); - } - - /* - * Now that the PZL is updated, complete the removal of any - * removed qsets. - * - * If the qset was to be reset, do so and reinsert it into the - * PZL if it has pending transfers. - */ - spin_lock_irq(&whc->lock); - - list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { - qset_remove_complete(whc, qset); - if (qset->reset) { - qset_reset(whc, qset); - if (!list_empty(&qset->stds)) { - qset_insert_in_sw_list(whc, qset); - queue_work(whc->workqueue, &whc->periodic_work); - } - } - } - - spin_unlock_irq(&whc->lock); -} - -/** - * pzl_urb_enqueue - queue an URB onto the periodic list (PZL) - * @whc: the WHCI host controller - * @urb: the URB to enqueue - * @mem_flags: flags for any memory allocations - * - * The qset for the endpoint is obtained and the urb queued on to it. - * - * Work is scheduled to update the hardware's view of the PZL. - */ -int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) -{ - struct whc_qset *qset; - int err; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); - if (err < 0) { - spin_unlock_irqrestore(&whc->lock, flags); - return err; - } - - qset = get_qset(whc, urb, GFP_ATOMIC); - if (qset == NULL) - err = -ENOMEM; - else - err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); - if (!err) { - if (!qset->in_sw_list && !qset->remove) - qset_insert_in_sw_list(whc, qset); - } else - usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); - - spin_unlock_irqrestore(&whc->lock, flags); - - if (!err) - queue_work(whc->workqueue, &whc->periodic_work); - - return err; -} - -/** - * pzl_urb_dequeue - remove an URB (qset) from the periodic list - * @whc: the WHCI host controller - * @urb: the URB to dequeue - * @status: the current status of the URB - * - * URBs that do yet have qTDs can simply be removed from the software - * queue, otherwise the qset must be removed so the qTDs can be safely - * removed. - */ -int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) -{ - struct whc_urb *wurb = urb->hcpriv; - struct whc_qset *qset = wurb->qset; - struct whc_std *std, *t; - bool has_qtd = false; - int ret; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); - if (ret < 0) - goto out; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) { - if (std->qtd) - has_qtd = true; - qset_free_std(whc, std); - } else - std->qtd = NULL; /* so this std is re-added when the qset is */ - } - - if (has_qtd) { - pzl_qset_remove(whc, qset); - update_pzl_hw_view(whc); - wurb->status = status; - wurb->is_async = false; - queue_work(whc->workqueue, &wurb->dequeue_work); - } else - qset_remove_urb(whc, qset, urb, status); -out: - spin_unlock_irqrestore(&whc->lock, flags); - - return ret; -} - -/** - * pzl_qset_delete - delete a qset from the PZL - */ -void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 1; - queue_work(whc->workqueue, &whc->periodic_work); - qset_delete(whc, qset); -} - -/** - * pzl_init - initialize the periodic zone list - * @whc: the WHCI host controller - */ -int pzl_init(struct whc *whc) -{ - int i; - - whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16, - &whc->pz_list_dma, GFP_KERNEL); - if (whc->pz_list == NULL) - return -ENOMEM; - - /* Set T bit on all elements in PZL. */ - for (i = 0; i < 16; i++) - whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); - - le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); - - return 0; -} - -/** - * pzl_clean_up - free PZL resources - * @whc: the WHCI host controller - * - * The PZL is stopped and empty. - */ -void pzl_clean_up(struct whc *whc) -{ - if (whc->pz_list) - dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list, - whc->pz_list_dma); -} diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c deleted file mode 100644 index 925166a207aa..000000000000 --- a/drivers/usb/host/whci/qset.c +++ /dev/null @@ -1,831 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) qset management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include <linux/uwb/umc.h> -#include <linux/usb.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags) -{ - struct whc_qset *qset; - dma_addr_t dma; - - qset = dma_pool_zalloc(whc->qset_pool, mem_flags, &dma); - if (qset == NULL) - return NULL; - - qset->qset_dma = dma; - qset->whc = whc; - - INIT_LIST_HEAD(&qset->list_node); - INIT_LIST_HEAD(&qset->stds); - - return qset; -} - -/** - * qset_fill_qh - fill the static endpoint state in a qset's QHead - * @qset: the qset whose QH needs initializing with static endpoint - * state - * @urb: an urb for a transfer to this endpoint - */ -static void qset_fill_qh(struct whc *whc, struct whc_qset *qset, struct urb *urb) -{ - struct usb_device *usb_dev = urb->dev; - struct wusb_dev *wusb_dev = usb_dev->wusb_dev; - struct usb_wireless_ep_comp_descriptor *epcd; - bool is_out; - uint8_t phy_rate; - - is_out = usb_pipeout(urb->pipe); - - qset->max_packet = le16_to_cpu(urb->ep->desc.wMaxPacketSize); - - epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra; - if (epcd) { - qset->max_seq = epcd->bMaxSequence; - qset->max_burst = epcd->bMaxBurst; - } else { - qset->max_seq = 2; - qset->max_burst = 1; - } - - /* - * Initial PHY rate is 53.3 Mbit/s for control endpoints or - * the maximum supported by the device for other endpoints - * (unless limited by the user). - */ - if (usb_pipecontrol(urb->pipe)) - phy_rate = UWB_PHY_RATE_53; - else { - uint16_t phy_rates; - - phy_rates = le16_to_cpu(wusb_dev->wusb_cap_descr->wPHYRates); - phy_rate = fls(phy_rates) - 1; - if (phy_rate > whc->wusbhc.phy_rate) - phy_rate = whc->wusbhc.phy_rate; - } - - qset->qh.info1 = cpu_to_le32( - QH_INFO1_EP(usb_pipeendpoint(urb->pipe)) - | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN) - | usb_pipe_to_qh_type(urb->pipe) - | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum)) - | QH_INFO1_MAX_PKT_LEN(qset->max_packet) - ); - qset->qh.info2 = cpu_to_le32( - QH_INFO2_BURST(qset->max_burst) - | QH_INFO2_DBP(0) - | QH_INFO2_MAX_COUNT(3) - | QH_INFO2_MAX_RETRY(3) - | QH_INFO2_MAX_SEQ(qset->max_seq - 1) - ); - /* FIXME: where can we obtain these Tx parameters from? Why - * doesn't the chip know what Tx power to use? It knows the Rx - * strength and can presumably guess the Tx power required - * from that? */ - qset->qh.info3 = cpu_to_le32( - QH_INFO3_TX_RATE(phy_rate) - | QH_INFO3_TX_PWR(0) /* 0 == max power */ - ); - - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); -} - -/** - * qset_clear - clear fields in a qset so it may be reinserted into a - * schedule. - * - * The sequence number and current window are not cleared (see - * qset_reset()). - */ -void qset_clear(struct whc *whc, struct whc_qset *qset) -{ - qset->td_start = qset->td_end = qset->ntds = 0; - - qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); - qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; - qset->qh.err_count = 0; - qset->qh.scratch[0] = 0; - qset->qh.scratch[1] = 0; - qset->qh.scratch[2] = 0; - - memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay)); - - init_completion(&qset->remove_complete); -} - -/** - * qset_reset - reset endpoint state in a qset. - * - * Clears the sequence number and current window. This qset must not - * be in the ASL or PZL. - */ -void qset_reset(struct whc *whc, struct whc_qset *qset) -{ - qset->reset = 0; - - qset->qh.status &= ~QH_STATUS_SEQ_MASK; - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); -} - -/** - * get_qset - get the qset for an async endpoint - * - * A new qset is created if one does not already exist. - */ -struct whc_qset *get_qset(struct whc *whc, struct urb *urb, - gfp_t mem_flags) -{ - struct whc_qset *qset; - - qset = urb->ep->hcpriv; - if (qset == NULL) { - qset = qset_alloc(whc, mem_flags); - if (qset == NULL) - return NULL; - - qset->ep = urb->ep; - urb->ep->hcpriv = qset; - qset_fill_qh(whc, qset, urb); - } - return qset; -} - -void qset_remove_complete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 0; - list_del_init(&qset->list_node); - complete(&qset->remove_complete); -} - -/** - * qset_add_qtds - add qTDs for an URB to a qset - * - * Returns true if the list (ASL/PZL) must be updated because (for a - * WHCI 0.95 controller) an activated qTD was pointed to be iCur. - */ -enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset) -{ - struct whc_std *std; - enum whc_update update = 0; - - list_for_each_entry(std, &qset->stds, list_node) { - struct whc_qtd *qtd; - uint32_t status; - - if (qset->ntds >= WHCI_QSET_TD_MAX - || (qset->pause_after_urb && std->urb != qset->pause_after_urb)) - break; - - if (std->qtd) - continue; /* already has a qTD */ - - qtd = std->qtd = &qset->qtd[qset->td_end]; - - /* Fill in setup bytes for control transfers. */ - if (usb_pipecontrol(std->urb->pipe)) - memcpy(qtd->setup, std->urb->setup_packet, 8); - - status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len); - - if (whc_std_last(std) && usb_pipeout(std->urb->pipe)) - status |= QTD_STS_LAST_PKT; - - /* - * For an IN transfer the iAlt field should be set so - * the h/w will automatically advance to the next - * transfer. However, if there are 8 or more TDs - * remaining in this transfer then iAlt cannot be set - * as it could point to somewhere in this transfer. - */ - if (std->ntds_remaining < WHCI_QSET_TD_MAX) { - int ialt; - ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX; - status |= QTD_STS_IALT(ialt); - } else if (usb_pipein(std->urb->pipe)) - qset->pause_after_urb = std->urb; - - if (std->num_pointers) - qtd->options = cpu_to_le32(QTD_OPT_IOC); - else - qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL); - qtd->page_list_ptr = cpu_to_le64(std->dma_addr); - - qtd->status = cpu_to_le32(status); - - if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end) - update = WHC_UPDATE_UPDATED; - - if (++qset->td_end >= WHCI_QSET_TD_MAX) - qset->td_end = 0; - qset->ntds++; - } - - return update; -} - -/** - * qset_remove_qtd - remove the first qTD from a qset. - * - * The qTD might be still active (if it's part of a IN URB that - * resulted in a short read) so ensure it's deactivated. - */ -static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset) -{ - qset->qtd[qset->td_start].status = 0; - - if (++qset->td_start >= WHCI_QSET_TD_MAX) - qset->td_start = 0; - qset->ntds--; -} - -static void qset_copy_bounce_to_sg(struct whc *whc, struct whc_std *std) -{ - struct scatterlist *sg; - void *bounce; - size_t remaining, offset; - - bounce = std->bounce_buf; - remaining = std->len; - - sg = std->bounce_sg; - offset = std->bounce_offset; - - while (remaining) { - size_t len; - - len = min(sg->length - offset, remaining); - memcpy(sg_virt(sg) + offset, bounce, len); - - bounce += len; - remaining -= len; - - offset += len; - if (offset >= sg->length) { - sg = sg_next(sg); - offset = 0; - } - } - -} - -/** - * qset_free_std - remove an sTD and free it. - * @whc: the WHCI host controller - * @std: the sTD to remove and free. - */ -void qset_free_std(struct whc *whc, struct whc_std *std) -{ - list_del(&std->list_node); - if (std->bounce_buf) { - bool is_out = usb_pipeout(std->urb->pipe); - dma_addr_t dma_addr; - - if (std->num_pointers) - dma_addr = le64_to_cpu(std->pl_virt[0].buf_ptr); - else - dma_addr = std->dma_addr; - - dma_unmap_single(whc->wusbhc.dev, dma_addr, - std->len, is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - if (!is_out) - qset_copy_bounce_to_sg(whc, std); - kfree(std->bounce_buf); - } - if (std->pl_virt) { - if (!dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) - dma_unmap_single(whc->wusbhc.dev, std->dma_addr, - std->num_pointers * sizeof(struct whc_page_list_entry), - DMA_TO_DEVICE); - kfree(std->pl_virt); - std->pl_virt = NULL; - } - kfree(std); -} - -/** - * qset_remove_qtds - remove an URB's qTDs (and sTDs). - */ -static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset, - struct urb *urb) -{ - struct whc_std *std, *t; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb != urb) - break; - if (std->qtd != NULL) - qset_remove_qtd(whc, qset); - qset_free_std(whc, std); - } -} - -/** - * qset_free_stds - free any remaining sTDs for an URB. - */ -static void qset_free_stds(struct whc_qset *qset, struct urb *urb) -{ - struct whc_std *std, *t; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) - qset_free_std(qset->whc, std); - } -} - -static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags) -{ - dma_addr_t dma_addr = std->dma_addr; - dma_addr_t sp, ep; - size_t pl_len; - int p; - - /* Short buffers don't need a page list. */ - if (std->len <= WHCI_PAGE_SIZE) { - std->num_pointers = 0; - return 0; - } - - sp = dma_addr & ~(WHCI_PAGE_SIZE-1); - ep = dma_addr + std->len; - std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); - - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->pl_virt = kmalloc(pl_len, mem_flags); - if (std->pl_virt == NULL) - return -ENOMEM; - std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); - if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) { - kfree(std->pl_virt); - return -EFAULT; - } - - for (p = 0; p < std->num_pointers; p++) { - std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); - dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); - } - - return 0; -} - -/** - * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system. - */ -static void urb_dequeue_work(struct work_struct *work) -{ - struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work); - struct whc_qset *qset = wurb->qset; - struct whc *whc = qset->whc; - unsigned long flags; - - if (wurb->is_async) - asl_update(whc, WUSBCMD_ASYNC_UPDATED - | WUSBCMD_ASYNC_SYNCED_DB - | WUSBCMD_ASYNC_QSET_RM); - else - pzl_update(whc, WUSBCMD_PERIODIC_UPDATED - | WUSBCMD_PERIODIC_SYNCED_DB - | WUSBCMD_PERIODIC_QSET_RM); - - spin_lock_irqsave(&whc->lock, flags); - qset_remove_urb(whc, qset, wurb->urb, wurb->status); - spin_unlock_irqrestore(&whc->lock, flags); -} - -static struct whc_std *qset_new_std(struct whc *whc, struct whc_qset *qset, - struct urb *urb, gfp_t mem_flags) -{ - struct whc_std *std; - - std = kzalloc(sizeof(struct whc_std), mem_flags); - if (std == NULL) - return NULL; - - std->urb = urb; - std->qtd = NULL; - - INIT_LIST_HEAD(&std->list_node); - list_add_tail(&std->list_node, &qset->stds); - - return std; -} - -static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags) -{ - size_t remaining; - struct scatterlist *sg; - int i; - int ntds = 0; - struct whc_std *std = NULL; - struct whc_page_list_entry *new_pl_virt; - dma_addr_t prev_end = 0; - size_t pl_len; - int p = 0; - - remaining = urb->transfer_buffer_length; - - for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) { - dma_addr_t dma_addr; - size_t dma_remaining; - dma_addr_t sp, ep; - int num_pointers; - - if (remaining == 0) { - break; - } - - dma_addr = sg_dma_address(sg); - dma_remaining = min_t(size_t, sg_dma_len(sg), remaining); - - while (dma_remaining) { - size_t dma_len; - - /* - * We can use the previous std (if it exists) provided that: - * - the previous one ended on a page boundary. - * - the current one begins on a page boundary. - * - the previous one isn't full. - * - * If a new std is needed but the previous one - * was not a whole number of packets then this - * sg list cannot be mapped onto multiple - * qTDs. Return an error and let the caller - * sort it out. - */ - if (!std - || (prev_end & (WHCI_PAGE_SIZE-1)) - || (dma_addr & (WHCI_PAGE_SIZE-1)) - || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) { - if (std && std->len % qset->max_packet != 0) - return -EINVAL; - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) { - return -ENOMEM; - } - ntds++; - p = 0; - } - - dma_len = dma_remaining; - - /* - * If the remainder of this element doesn't - * fit in a single qTD, limit the qTD to a - * whole number of packets. This allows the - * remainder to go into the next qTD. - */ - if (std->len + dma_len > QTD_MAX_XFER_SIZE) { - dma_len = (QTD_MAX_XFER_SIZE / qset->max_packet) - * qset->max_packet - std->len; - } - - std->len += dma_len; - std->ntds_remaining = -1; /* filled in later */ - - sp = dma_addr & ~(WHCI_PAGE_SIZE-1); - ep = dma_addr + dma_len; - num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); - std->num_pointers += num_pointers; - - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - - new_pl_virt = krealloc(std->pl_virt, pl_len, mem_flags); - if (new_pl_virt == NULL) { - kfree(std->pl_virt); - std->pl_virt = NULL; - return -ENOMEM; - } - std->pl_virt = new_pl_virt; - - for (;p < std->num_pointers; p++) { - std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); - dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); - } - - prev_end = dma_addr = ep; - dma_remaining -= dma_len; - remaining -= dma_len; - } - } - - /* Now the number of stds is know, go back and fill in - std->ntds_remaining. */ - list_for_each_entry(std, &qset->stds, list_node) { - if (std->ntds_remaining == -1) { - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, - pl_len, DMA_TO_DEVICE); - if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) - return -EFAULT; - std->ntds_remaining = ntds--; - } - } - return 0; -} - -/** - * qset_add_urb_sg_linearize - add an urb with sg list, copying the data - * - * If the URB contains an sg list whose elements cannot be directly - * mapped to qTDs then the data must be transferred via bounce - * buffers. - */ -static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset, - struct urb *urb, gfp_t mem_flags) -{ - bool is_out = usb_pipeout(urb->pipe); - size_t max_std_len; - size_t remaining; - int ntds = 0; - struct whc_std *std = NULL; - void *bounce = NULL; - struct scatterlist *sg; - int i; - - /* limit maximum bounce buffer to 16 * 3.5 KiB ~= 28 k */ - max_std_len = qset->max_burst * qset->max_packet; - - remaining = urb->transfer_buffer_length; - - for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) { - size_t len; - size_t sg_remaining; - void *orig; - - if (remaining == 0) { - break; - } - - sg_remaining = min_t(size_t, remaining, sg->length); - orig = sg_virt(sg); - - while (sg_remaining) { - if (!std || std->len == max_std_len) { - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) - return -ENOMEM; - std->bounce_buf = kmalloc(max_std_len, mem_flags); - if (std->bounce_buf == NULL) - return -ENOMEM; - std->bounce_sg = sg; - std->bounce_offset = orig - sg_virt(sg); - bounce = std->bounce_buf; - ntds++; - } - - len = min(sg_remaining, max_std_len - std->len); - - if (is_out) - memcpy(bounce, orig, len); - - std->len += len; - std->ntds_remaining = -1; /* filled in later */ - - bounce += len; - orig += len; - sg_remaining -= len; - remaining -= len; - } - } - - /* - * For each of the new sTDs, map the bounce buffers, create - * page lists (if necessary), and fill in std->ntds_remaining. - */ - list_for_each_entry(std, &qset->stds, list_node) { - if (std->ntds_remaining != -1) - continue; - - std->dma_addr = dma_map_single(&whc->umc->dev, std->bounce_buf, std->len, - is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - if (dma_mapping_error(&whc->umc->dev, std->dma_addr)) - return -EFAULT; - - if (qset_fill_page_list(whc, std, mem_flags) < 0) - return -ENOMEM; - - std->ntds_remaining = ntds--; - } - - return 0; -} - -/** - * qset_add_urb - add an urb to the qset's queue. - * - * The URB is chopped into sTDs, one for each qTD that will required. - * At least one qTD (and sTD) is required even if the transfer has no - * data (e.g., for some control transfers). - */ -int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags) -{ - struct whc_urb *wurb; - int remaining = urb->transfer_buffer_length; - u64 transfer_dma = urb->transfer_dma; - int ntds_remaining; - int ret; - - wurb = kzalloc(sizeof(struct whc_urb), mem_flags); - if (wurb == NULL) - goto err_no_mem; - urb->hcpriv = wurb; - wurb->qset = qset; - wurb->urb = urb; - INIT_WORK(&wurb->dequeue_work, urb_dequeue_work); - - if (urb->num_sgs) { - ret = qset_add_urb_sg(whc, qset, urb, mem_flags); - if (ret == -EINVAL) { - qset_free_stds(qset, urb); - ret = qset_add_urb_sg_linearize(whc, qset, urb, mem_flags); - } - if (ret < 0) - goto err_no_mem; - return 0; - } - - ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE); - if (ntds_remaining == 0) - ntds_remaining = 1; - - while (ntds_remaining) { - struct whc_std *std; - size_t std_len; - - std_len = remaining; - if (std_len > QTD_MAX_XFER_SIZE) - std_len = QTD_MAX_XFER_SIZE; - - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) - goto err_no_mem; - - std->dma_addr = transfer_dma; - std->len = std_len; - std->ntds_remaining = ntds_remaining; - - if (qset_fill_page_list(whc, std, mem_flags) < 0) - goto err_no_mem; - - ntds_remaining--; - remaining -= std_len; - transfer_dma += std_len; - } - - return 0; - -err_no_mem: - qset_free_stds(qset, urb); - return -ENOMEM; -} - -/** - * qset_remove_urb - remove an URB from the urb queue. - * - * The URB is returned to the USB subsystem. - */ -void qset_remove_urb(struct whc *whc, struct whc_qset *qset, - struct urb *urb, int status) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - struct whc_urb *wurb = urb->hcpriv; - - usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb); - /* Drop the lock as urb->complete() may enqueue another urb. */ - spin_unlock(&whc->lock); - wusbhc_giveback_urb(wusbhc, urb, status); - spin_lock(&whc->lock); - - kfree(wurb); -} - -/** - * get_urb_status_from_qtd - get the completed urb status from qTD status - * @urb: completed urb - * @status: qTD status - */ -static int get_urb_status_from_qtd(struct urb *urb, u32 status) -{ - if (status & QTD_STS_HALTED) { - if (status & QTD_STS_DBE) - return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM; - else if (status & QTD_STS_BABBLE) - return -EOVERFLOW; - else if (status & QTD_STS_RCE) - return -ETIME; - return -EPIPE; - } - if (usb_pipein(urb->pipe) - && (urb->transfer_flags & URB_SHORT_NOT_OK) - && urb->actual_length < urb->transfer_buffer_length) - return -EREMOTEIO; - return 0; -} - -/** - * process_inactive_qtd - process an inactive (but not halted) qTD. - * - * Update the urb with the transfer bytes from the qTD, if the urb is - * completely transferred or (in the case of an IN only) the LPF is - * set, then the transfer is complete and the urb should be returned - * to the system. - */ -void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd) -{ - struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); - struct urb *urb = std->urb; - uint32_t status; - bool complete; - - status = le32_to_cpu(qtd->status); - - urb->actual_length += std->len - QTD_STS_TO_LEN(status); - - if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT)) - complete = true; - else - complete = whc_std_last(std); - - qset_remove_qtd(whc, qset); - qset_free_std(whc, std); - - /* - * Transfers for this URB are complete? Then return it to the - * USB subsystem. - */ - if (complete) { - qset_remove_qtds(whc, qset, urb); - qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status)); - - /* - * If iAlt isn't valid then the hardware didn't - * advance iCur. Adjust the start and end pointers to - * match iCur. - */ - if (!(status & QTD_STS_IALT_VALID)) - qset->td_start = qset->td_end - = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status)); - qset->pause_after_urb = NULL; - } -} - -/** - * process_halted_qtd - process a qset with a halted qtd - * - * Remove all the qTDs for the failed URB and return the failed URB to - * the USB subsystem. Then remove all other qTDs so the qset can be - * removed. - * - * FIXME: this is the point where rate adaptation can be done. If a - * transfer failed because it exceeded the maximum number of retries - * then it could be reactivated with a slower rate without having to - * remove the qset. - */ -void process_halted_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd) -{ - struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); - struct urb *urb = std->urb; - int urb_status; - - urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status)); - - qset_remove_qtds(whc, qset, urb); - qset_remove_urb(whc, qset, urb, urb_status); - - list_for_each_entry(std, &qset->stds, list_node) { - if (qset->ntds == 0) - break; - qset_remove_qtd(whc, qset); - std->qtd = NULL; - } - - qset->remove = 1; -} - -void qset_free(struct whc *whc, struct whc_qset *qset) -{ - dma_pool_free(whc->qset_pool, qset, qset->qset_dma); -} - -/** - * qset_delete - wait for a qset to be unused, then free it. - */ -void qset_delete(struct whc *whc, struct whc_qset *qset) -{ - wait_for_completion(&qset->remove_complete); - qset_free(whc, qset); -} diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h deleted file mode 100644 index 139476997e7c..000000000000 --- a/drivers/usb/host/whci/whcd.h +++ /dev/null @@ -1,202 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) private header. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#ifndef __WHCD_H -#define __WHCD_H - -#include <linux/uwb/whci.h> -#include <linux/uwb/umc.h> -#include <linux/workqueue.h> - -#include "whci-hc.h" - -/* Generic command timeout. */ -#define WHC_GENCMD_TIMEOUT_MS 100 - -struct whc_dbg; - -struct whc { - struct wusbhc wusbhc; - struct umc_dev *umc; - - resource_size_t base_phys; - void __iomem *base; - int irq; - - u8 n_devices; - u8 n_keys; - u8 n_mmc_ies; - - u64 *pz_list; - struct dn_buf_entry *dn_buf; - struct di_buf_entry *di_buf; - dma_addr_t pz_list_dma; - dma_addr_t dn_buf_dma; - dma_addr_t di_buf_dma; - - spinlock_t lock; - struct mutex mutex; - - void * gen_cmd_buf; - dma_addr_t gen_cmd_buf_dma; - wait_queue_head_t cmd_wq; - - struct workqueue_struct *workqueue; - struct work_struct dn_work; - - struct dma_pool *qset_pool; - - struct list_head async_list; - struct list_head async_removed_list; - wait_queue_head_t async_list_wq; - struct work_struct async_work; - - struct list_head periodic_list[5]; - struct list_head periodic_removed_list; - wait_queue_head_t periodic_list_wq; - struct work_struct periodic_work; - - struct whc_dbg *dbg; -}; - -#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc)) - -/** - * struct whc_std - a software TD. - * @urb: the URB this sTD is for. - * @offset: start of the URB's data for this TD. - * @len: the length of data in the associated TD. - * @ntds_remaining: number of TDs (starting from this one) in this transfer. - * - * @bounce_buf: a bounce buffer if the std was from an urb with a sg - * list that could not be mapped to qTDs directly. - * @bounce_sg: the first scatterlist element bounce_buf is for. - * @bounce_offset: the offset into bounce_sg for the start of bounce_buf. - * - * Queued URBs may require more TDs than are available in a qset so we - * use a list of these "software TDs" (sTDs) to hold per-TD data. - */ -struct whc_std { - struct urb *urb; - size_t len; - int ntds_remaining; - struct whc_qtd *qtd; - - struct list_head list_node; - int num_pointers; - dma_addr_t dma_addr; - struct whc_page_list_entry *pl_virt; - - void *bounce_buf; - struct scatterlist *bounce_sg; - unsigned bounce_offset; -}; - -/** - * struct whc_urb - per URB host controller structure. - * @urb: the URB this struct is for. - * @qset: the qset associated to the URB. - * @dequeue_work: the work to remove the URB when dequeued. - * @is_async: the URB belongs to async sheduler or not. - * @status: the status to be returned when calling wusbhc_giveback_urb. - */ -struct whc_urb { - struct urb *urb; - struct whc_qset *qset; - struct work_struct dequeue_work; - bool is_async; - int status; -}; - -/** - * whc_std_last - is this sTD the URB's last? - * @std: the sTD to check. - */ -static inline bool whc_std_last(struct whc_std *std) -{ - return std->ntds_remaining <= 1; -} - -enum whc_update { - WHC_UPDATE_ADDED = 0x01, - WHC_UPDATE_REMOVED = 0x02, - WHC_UPDATE_UPDATED = 0x04, -}; - -/* init.c */ -int whc_init(struct whc *whc); -void whc_clean_up(struct whc *whc); - -/* hw.c */ -void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); -int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); -void whc_hw_error(struct whc *whc, const char *reason); - -/* wusb.c */ -int whc_wusbhc_start(struct wusbhc *wusbhc); -void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay); -int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie); -int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle); -int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm); -int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); -int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots); -int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *ptk, size_t key_size); -int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *gtk, size_t key_size); -int whc_set_cluster_id(struct whc *whc, u8 bcid); - -/* int.c */ -irqreturn_t whc_int_handler(struct usb_hcd *hcd); -void whc_dn_work(struct work_struct *work); - -/* asl.c */ -void asl_start(struct whc *whc); -void asl_stop(struct whc *whc); -int asl_init(struct whc *whc); -void asl_clean_up(struct whc *whc); -int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); -int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status); -void asl_qset_delete(struct whc *whc, struct whc_qset *qset); -void scan_async_work(struct work_struct *work); - -/* pzl.c */ -int pzl_init(struct whc *whc); -void pzl_clean_up(struct whc *whc); -void pzl_start(struct whc *whc); -void pzl_stop(struct whc *whc); -int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); -int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status); -void pzl_qset_delete(struct whc *whc, struct whc_qset *qset); -void scan_periodic_work(struct work_struct *work); - -/* qset.c */ -struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags); -void qset_free(struct whc *whc, struct whc_qset *qset); -struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); -void qset_delete(struct whc *whc, struct whc_qset *qset); -void qset_clear(struct whc *whc, struct whc_qset *qset); -void qset_reset(struct whc *whc, struct whc_qset *qset); -int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags); -void qset_free_std(struct whc *whc, struct whc_std *std); -void qset_remove_urb(struct whc *whc, struct whc_qset *qset, - struct urb *urb, int status); -void process_halted_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd); -void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd); -enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset); -void qset_remove_complete(struct whc *whc, struct whc_qset *qset); -void pzl_update(struct whc *whc, uint32_t wusbcmd); -void asl_update(struct whc *whc, uint32_t wusbcmd); - -/* debug.c */ -void whc_dbg_init(struct whc *whc); -void whc_dbg_clean_up(struct whc *whc); - -#endif /* #ifndef __WHCD_H */ diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h deleted file mode 100644 index 5a86a57a80cc..000000000000 --- a/drivers/usb/host/whci/whci-hc.h +++ /dev/null @@ -1,401 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) data structures. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#ifndef _WHCI_WHCI_HC_H -#define _WHCI_WHCI_HC_H - -#include <linux/list.h> - -/** - * WHCI_PAGE_SIZE - page size use by WHCI - * - * WHCI assumes that host system uses pages of 4096 octets. - */ -#define WHCI_PAGE_SIZE 4096 - - -/** - * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single - * qtd. - * - * This is 2^20 - 1. - */ -#define QTD_MAX_XFER_SIZE 1048575 - - -/** - * struct whc_qtd - Queue Element Transfer Descriptors (qTD) - * - * This describes the data for a bulk, control or interrupt transfer. - * - * [WHCI] section 3.2.4 - */ -struct whc_qtd { - __le32 status; /*< remaining transfer len and transfer status */ - __le32 options; - __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ - __u8 setup[8]; /*< setup data for control transfers */ -} __attribute__((packed)); - -#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ -#define QTD_STS_HALTED (1 << 30) /* transfer halted */ -#define QTD_STS_DBE (1 << 29) /* data buffer error */ -#define QTD_STS_BABBLE (1 << 28) /* babble detected */ -#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ -#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ -#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ -#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ -#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ -#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ -#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) - -#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ -#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ - -/** - * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) - * - * This describes the data and other parameters for an isochronous - * transfer. - * - * [WHCI] section 3.2.5 - */ -struct whc_itd { - __le16 presentation_time; /*< presentation time for OUT transfers */ - __u8 num_segments; /*< number of data segments in segment list */ - __u8 status; /*< command execution status */ - __le32 options; /*< misc transfer options */ - __le64 page_list_ptr; /*< physical pointer to data buffer page list */ - __le64 seg_list_ptr; /*< physical pointer to segment list */ -} __attribute__((packed)); - -#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ -#define ITD_STS_DBE (1 << 5) /* data buffer error */ -#define ITD_STS_BABBLE (1 << 4) /* babble detected */ -#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ - -#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ -#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ - -/** - * Page list entry. - * - * A TD's page list must contain sufficient page list entries for the - * total data length in the TD. - * - * [WHCI] section 3.2.4.3 - */ -struct whc_page_list_entry { - __le64 buf_ptr; /*< physical pointer to buffer */ -} __attribute__((packed)); - -/** - * struct whc_seg_list_entry - Segment list entry. - * - * Describes a portion of the data buffer described in the containing - * qTD's page list. - * - * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr - * + qtd->seg_list_ptr[seg].offset; - * - * Segments can't cross page boundries. - * - * [WHCI] section 3.2.5.5 - */ -struct whc_seg_list_entry { - __le16 len; /*< segment length */ - __u8 idx; /*< index into page list */ - __u8 status; /*< segment status */ - __le16 offset; /*< 12 bit offset into page */ -} __attribute__((packed)); - -/** - * struct whc_qhead - endpoint and status information for a qset. - * - * [WHCI] section 3.2.6 - */ -struct whc_qhead { - __le64 link; /*< next qset in list */ - __le32 info1; - __le32 info2; - __le32 info3; - __le16 status; - __le16 err_count; /*< transaction error count */ - __le32 cur_window; - __le32 scratch[3]; /*< h/w scratch area */ - union { - struct whc_qtd qtd; - struct whc_itd itd; - } overlay; -} __attribute__((packed)); - -#define QH_LINK_PTR_MASK (~0x03Full) -#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) -#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ -#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ -#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ - -#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ -#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ -#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ -#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ -#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ -#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ -#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ -#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ -#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ -#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ -#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ - -#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ -#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ -#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ -#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ -#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ -#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ -#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ -#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ - -#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */ -#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ - -#define QH_STATUS_FLOW_CTRL (1 << 15) -#define QH_STATUS_ICUR(i) ((i) << 5) -#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) -#define QH_STATUS_SEQ_MASK 0x1f - -/** - * usb_pipe_to_qh_type - USB core pipe type to QH transfer type - * - * Returns the QH type field for a USB core pipe type. - */ -static inline unsigned usb_pipe_to_qh_type(unsigned pipe) -{ - static const unsigned type[] = { - [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, - [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, - [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, - [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, - }; - return type[usb_pipetype(pipe)]; -} - -/** - * Maxiumum number of TDs in a qset. - */ -#define WHCI_QSET_TD_MAX 8 - -/** - * struct whc_qset - WUSB data transfers to a specific endpoint - * @qh: the QHead of this qset - * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt - * transfers) - * @itd: up to 8 iTDs (for qsets for isochronous transfers) - * @qset_dma: DMA address for this qset - * @whc: WHCI HC this qset is for - * @ep: endpoint - * @stds: list of sTDs queued to this qset - * @ntds: number of qTDs queued (not necessarily the same as nTDs - * field in the QH) - * @td_start: index of the first qTD in the list - * @td_end: index of next free qTD in the list (provided - * ntds < WHCI_QSET_TD_MAX) - * - * Queue Sets (qsets) are added to the asynchronous schedule list - * (ASL) or the periodic zone list (PZL). - * - * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). - * Each TD may refer to at most 1 MiB of data. If a single transfer - * has > 8MiB of data, TDs can be reused as they are completed since - * the TD list is used as a circular buffer. Similarly, several - * (smaller) transfers may be queued in a qset. - * - * WHCI controllers may cache portions of the qsets in the ASL and - * PZL, requiring the WHCD to inform the WHC that the lists have been - * updated (fields changed or qsets inserted or removed). For safe - * insertion and removal of qsets from the lists the schedule must be - * stopped to avoid races in updating the QH link pointers. - * - * Since the HC is free to execute qsets in any order, all transfers - * to an endpoint should use the same qset to ensure transfers are - * executed in the order they're submitted. - * - * [WHCI] section 3.2.3 - */ -struct whc_qset { - struct whc_qhead qh; - union { - struct whc_qtd qtd[WHCI_QSET_TD_MAX]; - struct whc_itd itd[WHCI_QSET_TD_MAX]; - }; - - /* private data for WHCD */ - dma_addr_t qset_dma; - struct whc *whc; - struct usb_host_endpoint *ep; - struct list_head stds; - int ntds; - int td_start; - int td_end; - struct list_head list_node; - unsigned in_sw_list:1; - unsigned in_hw_list:1; - unsigned remove:1; - unsigned reset:1; - struct urb *pause_after_urb; - struct completion remove_complete; - uint16_t max_packet; - uint8_t max_burst; - uint8_t max_seq; -}; - -static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) -{ - if (target) - *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); - else - *ptr = QH_LINK_T; -} - -/** - * struct di_buf_entry - Device Information (DI) buffer entry. - * - * There's one of these per connected device. - */ -struct di_buf_entry { - __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ - __le32 addr_sec_info; /*< addressing and security info */ - __le32 reserved[7]; -} __attribute__((packed)); - -#define WHC_DI_SECURE (1 << 31) -#define WHC_DI_DISABLE (1 << 30) -#define WHC_DI_KEY_IDX(k) ((k) << 8) -#define WHC_DI_KEY_IDX_MASK 0x0000ff00 -#define WHC_DI_DEV_ADDR(a) ((a) << 0) -#define WHC_DI_DEV_ADDR_MASK 0x000000ff - -/** - * struct dn_buf_entry - Device Notification (DN) buffer entry. - * - * [WHCI] section 3.2.8 - */ -struct dn_buf_entry { - __u8 msg_size; /*< number of octets of valid DN data */ - __u8 reserved1; - __u8 src_addr; /*< source address */ - __u8 status; /*< buffer entry status */ - __le32 tkid; /*< TKID for source device, valid if secure bit is set */ - __u8 dn_data[56]; /*< up to 56 octets of DN data */ -} __attribute__((packed)); - -#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ -#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ - -#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) - -/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of - data. [WHCI] section 2.4.7. */ -#define WHC_GEN_CMD_DATA_LEN 256 - -/* - * HC registers. - * - * [WHCI] section 2.4 - */ - -#define WHCIVERSION 0x00 - -#define WHCSPARAMS 0x04 -# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) -# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) -# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) - -#define WUSBCMD 0x08 -# define WUSBCMD_BCID(b) ((b) << 16) -# define WUSBCMD_BCID_MASK (0xff << 16) -# define WUSBCMD_ASYNC_QSET_RM (1 << 12) -# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) -# define WUSBCMD_WUSBSI(s) ((s) << 8) -# define WUSBCMD_WUSBSI_MASK (0x7 << 8) -# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) -# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) -# define WUSBCMD_ASYNC_UPDATED (1 << 5) -# define WUSBCMD_PERIODIC_UPDATED (1 << 4) -# define WUSBCMD_ASYNC_EN (1 << 3) -# define WUSBCMD_PERIODIC_EN (1 << 2) -# define WUSBCMD_WHCRESET (1 << 1) -# define WUSBCMD_RUN (1 << 0) - -#define WUSBSTS 0x0c -# define WUSBSTS_ASYNC_SCHED (1 << 15) -# define WUSBSTS_PERIODIC_SCHED (1 << 14) -# define WUSBSTS_DNTS_SCHED (1 << 13) -# define WUSBSTS_HCHALTED (1 << 12) -# define WUSBSTS_GEN_CMD_DONE (1 << 9) -# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBSTS_DNTS_OVERFLOW (1 << 7) -# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBSTS_HOST_ERR (1 << 5) -# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBSTS_DNTS_INT (1 << 2) -# define WUSBSTS_ERR_INT (1 << 1) -# define WUSBSTS_INT (1 << 0) -# define WUSBSTS_INT_MASK 0x3ff - -#define WUSBINTR 0x10 -# define WUSBINTR_GEN_CMD_DONE (1 << 9) -# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBINTR_DNTS_OVERFLOW (1 << 7) -# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBINTR_HOST_ERR (1 << 5) -# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBINTR_DNTS_INT (1 << 2) -# define WUSBINTR_ERR_INT (1 << 1) -# define WUSBINTR_INT (1 << 0) -# define WUSBINTR_ALL 0x3ff - -#define WUSBGENCMDSTS 0x14 -# define WUSBGENCMDSTS_ACTIVE (1 << 31) -# define WUSBGENCMDSTS_ERROR (1 << 24) -# define WUSBGENCMDSTS_IOC (1 << 23) -# define WUSBGENCMDSTS_MMCIE_ADD 0x01 -# define WUSBGENCMDSTS_MMCIE_RM 0x02 -# define WUSBGENCMDSTS_SET_MAS 0x03 -# define WUSBGENCMDSTS_CHAN_STOP 0x04 -# define WUSBGENCMDSTS_RWP_EN 0x05 - -#define WUSBGENCMDPARAMS 0x18 -#define WUSBGENADDR 0x20 -#define WUSBASYNCLISTADDR 0x28 -#define WUSBDNTSBUFADDR 0x30 -#define WUSBDEVICEINFOADDR 0x38 - -#define WUSBSETSECKEYCMD 0x40 -# define WUSBSETSECKEYCMD_SET (1 << 31) -# define WUSBSETSECKEYCMD_ERASE (1 << 30) -# define WUSBSETSECKEYCMD_GTK (1 << 8) -# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) - -#define WUSBTKID 0x44 -#define WUSBSECKEY 0x48 -#define WUSBPERIODICLISTBASE 0x58 -#define WUSBMASINDEX 0x60 - -#define WUSBDNTSCTRL 0x64 -# define WUSBDNTSCTRL_ACTIVE (1 << 31) -# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) -# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) - -#define WUSBTIME 0x68 -# define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff - -#define WUSBBPST 0x6c -#define WUSBDIBUPDATED 0x70 - -#endif /* #ifndef _WHCI_WHCI_HC_H */ diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c deleted file mode 100644 index 8a4d805ff63a..000000000000 --- a/drivers/usb/host/whci/wusb.c +++ /dev/null @@ -1,210 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) WUSB operations. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static int whc_update_di(struct whc *whc, int idx) -{ - int offset = idx / 32; - u32 bit = 1 << (idx % 32); - - le_writel(bit, whc->base + WUSBDIBUPDATED + offset); - - return whci_wait_for(&whc->umc->dev, - whc->base + WUSBDIBUPDATED + offset, bit, 0, - 100, "DI update"); -} - -/* - * WHCI starts MMCs based on there being a valid GTK so these need - * only start/stop the asynchronous and periodic schedules and send a - * channel stop command. - */ - -int whc_wusbhc_start(struct wusbhc *wusbhc) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - - asl_start(whc); - pzl_start(whc); - - return 0; -} - -void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 stop_time, now_time; - int ret; - - pzl_stop(whc); - asl_stop(whc); - - now_time = le_readl(whc->base + WUSBTIME) & WUSBTIME_CHANNEL_TIME_MASK; - stop_time = (now_time + ((delay * 8) << 7)) & 0x00ffffff; - ret = whc_do_gencmd(whc, WUSBGENCMDSTS_CHAN_STOP, stop_time, NULL, 0); - if (ret == 0) - msleep(delay); -} - -int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 params; - - params = (interval << 24) - | (repeat_cnt << 16) - | (wuie->bLength << 8) - | handle; - - return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength); -} - -int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 params; - - params = handle; - - return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0); -} - -int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - - if (stream_index >= 0) - whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index)); - - return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm)); -} - -int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - int idx = wusb_dev->port_idx; - struct di_buf_entry *di = &whc->di_buf[idx]; - int ret; - - mutex_lock(&whc->mutex); - - uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability); - di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK); - di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr); - - ret = whc_update_di(whc, idx); - - mutex_unlock(&whc->mutex); - - return ret; -} - -/* - * Set the number of Device Notification Time Slots (DNTS) and enable - * device notifications. - */ -int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 dntsctrl; - - dntsctrl = WUSBDNTSCTRL_ACTIVE - | WUSBDNTSCTRL_INTERVAL(interval) - | WUSBDNTSCTRL_SLOTS(slots); - - le_writel(dntsctrl, whc->base + WUSBDNTSCTRL); - - return 0; -} - -static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid, - const void *key, size_t key_size, bool is_gtk) -{ - uint32_t setkeycmd; - uint32_t seckey[4]; - int i; - int ret; - - memcpy(seckey, key, key_size); - setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index); - if (is_gtk) - setkeycmd |= WUSBSETSECKEYCMD_GTK; - - le_writel(tkid, whc->base + WUSBTKID); - for (i = 0; i < 4; i++) - le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i); - le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD); - - ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD, - WUSBSETSECKEYCMD_SET, 0, 100, "set key"); - - return ret; -} - -/** - * whc_set_ptk - set the PTK to use for a device. - * - * The index into the key table for this PTK is the same as the - * device's port index. - */ -int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *ptk, size_t key_size) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - struct di_buf_entry *di = &whc->di_buf[port_idx]; - int ret; - - mutex_lock(&whc->mutex); - - if (ptk) { - ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false); - if (ret) - goto out; - - di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK; - di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx); - } else - di->addr_sec_info &= ~WHC_DI_SECURE; - - ret = whc_update_di(whc, port_idx); -out: - mutex_unlock(&whc->mutex); - return ret; -} - -/** - * whc_set_gtk - set the GTK for subsequent broadcast packets - * - * The GTK is stored in the last entry in the key table (the previous - * N_DEVICES entries are for the per-device PTKs). - */ -int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *gtk, size_t key_size) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - mutex_lock(&whc->mutex); - - ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true); - - mutex_unlock(&whc->mutex); - - return ret; -} - -int whc_set_cluster_id(struct whc *whc, u8 bcid) -{ - whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid)); - return 0; -} diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 52e32644a4b2..93e2cca5262d 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -22,7 +22,6 @@ dbc_dma_alloc_coherent(struct xhci_hcd *xhci, size_t size, vaddr = dma_alloc_coherent(xhci_to_hcd(xhci)->self.sysdev, size, dma_handle, flags); - memset(vaddr, 0, size); return vaddr; } diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index aff79ff5aba4..be726c791323 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -139,14 +139,14 @@ xhci_dbc_alloc_requests(struct dbc_ep *dep, struct list_head *head, struct dbc_request *req; for (i = 0; i < DBC_QUEUE_SIZE; i++) { - req = dbc_alloc_request(dep, GFP_ATOMIC); + req = dbc_alloc_request(dep, GFP_KERNEL); if (!req) break; req->length = DBC_MAX_PACKET; req->buf = kmalloc(req->length, GFP_KERNEL); if (!req->buf) { - xhci_dbc_free_req(dep, req); + dbc_free_request(dep, req); break; } diff --git a/drivers/usb/host/xhci-ext-caps.c b/drivers/usb/host/xhci-ext-caps.c index 399113f9fc5c..f498160df969 100644 --- a/drivers/usb/host/xhci-ext-caps.c +++ b/drivers/usb/host/xhci-ext-caps.c @@ -6,11 +6,20 @@ */ #include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/pci.h> #include "xhci.h" #define USB_SW_DRV_NAME "intel_xhci_usb_sw" #define USB_SW_RESOURCE_SIZE 0x400 +#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 + +static const struct property_entry role_switch_props[] = { + PROPERTY_ENTRY_BOOL("sw_switch_disable"), + {}, +}; + static void xhci_intel_unregister_pdev(void *arg) { platform_device_unregister(arg); @@ -21,6 +30,7 @@ static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct device *dev = hcd->self.controller; struct platform_device *pdev; + struct pci_dev *pci = to_pci_dev(dev); struct resource res = { 0, }; int ret; @@ -43,6 +53,14 @@ static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset) return ret; } + if (pci->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + ret = platform_device_add_properties(pdev, role_switch_props); + if (ret) { + dev_err(dev, "failed to register device properties\n"); + return ret; + } + } + pdev->dev.parent = dev; ret = platform_device_add(pdev); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 3abe70ff1b1e..b7d23c438756 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1149,7 +1149,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } port_li = readl(ports[wIndex]->addr + PORTLI); status = xhci_get_ext_port_status(temp, port_li); - put_unaligned_le32(cpu_to_le32(status), &buf[4]); + put_unaligned_le32(status, &buf[4]); } break; case SetPortFeature: diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index cf5e17962179..e16eda6e2b8b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2399,7 +2399,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) flags); if (!xhci->dcbaa) goto fail; - memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa)); xhci->dcbaa->dma = dma; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Device context base array address = 0x%llx (DMA), %p (virt)", diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 026fe18972d3..b18a6baef204 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -216,6 +216,10 @@ static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk) return PTR_ERR(mtk->sys_clk); } + mtk->xhci_clk = devm_clk_get_optional(dev, "xhci_ck"); + if (IS_ERR(mtk->xhci_clk)) + return PTR_ERR(mtk->xhci_clk); + mtk->ref_clk = devm_clk_get_optional(dev, "ref_ck"); if (IS_ERR(mtk->ref_clk)) return PTR_ERR(mtk->ref_clk); @@ -244,6 +248,12 @@ static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk) goto sys_clk_err; } + ret = clk_prepare_enable(mtk->xhci_clk); + if (ret) { + dev_err(mtk->dev, "failed to enable xhci_clk\n"); + goto xhci_clk_err; + } + ret = clk_prepare_enable(mtk->mcu_clk); if (ret) { dev_err(mtk->dev, "failed to enable mcu_clk\n"); @@ -261,6 +271,8 @@ static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk) dma_clk_err: clk_disable_unprepare(mtk->mcu_clk); mcu_clk_err: + clk_disable_unprepare(mtk->xhci_clk); +xhci_clk_err: clk_disable_unprepare(mtk->sys_clk); sys_clk_err: clk_disable_unprepare(mtk->ref_clk); @@ -272,6 +284,7 @@ static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk) { clk_disable_unprepare(mtk->dma_clk); clk_disable_unprepare(mtk->mcu_clk); + clk_disable_unprepare(mtk->xhci_clk); clk_disable_unprepare(mtk->sys_clk); clk_disable_unprepare(mtk->ref_clk); } diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 8be8c5f7ff62..5ac458b7d2e0 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -139,6 +139,7 @@ struct xhci_hcd_mtk { struct regulator *vusb33; struct regulator *vbus; struct clk *sys_clk; /* sys and mac clock */ + struct clk *xhci_clk; struct clk *ref_clk; struct clk *mcu_clk; struct clk *dma_clk; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c2fe218e051f..1e0236e90687 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -130,7 +130,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_AMD_0x96_HOST; /* AMD PLL quirk */ - if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) + if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check()) xhci->quirks |= XHCI_AMD_PLL_FIX; if (pdev->vendor == PCI_VENDOR_ID_AMD && diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 998241f5fce3..d90cd5ec09cf 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -66,12 +66,14 @@ static int xhci_priv_resume_quirk(struct usb_hcd *hcd) static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) { + struct xhci_plat_priv *priv = xhci_to_priv(xhci); + /* * As of now platform drivers don't provide MSI support so we ensure * here that the generic code does not try to make a pci_dev from our * dev struct in order to setup MSI */ - xhci->quirks |= XHCI_PLAT; + xhci->quirks |= XHCI_PLAT | priv->quirks; } /* called during probe() after chip reset completes */ @@ -103,17 +105,11 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { }; static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { - .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, - .init_quirk = xhci_rcar_init_quirk, - .plat_start = xhci_rcar_start, - .resume_quirk = xhci_rcar_resume_quirk, + SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1) }; static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { - .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3, - .init_quirk = xhci_rcar_init_quirk, - .plat_start = xhci_rcar_start, - .resume_quirk = xhci_rcar_resume_quirk, + SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3) }; static const struct of_device_id usb_xhci_of_match[] = { @@ -307,7 +303,6 @@ static int xhci_plat_probe(struct platform_device *pdev) ret = usb_phy_init(hcd->usb_phy); if (ret) goto put_usb3_hcd; - hcd->skip_phy_initialization = 1; } hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index ae29f22ff5bd..5681723fc9cd 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -12,10 +12,12 @@ struct xhci_plat_priv { const char *firmware_name; + unsigned long long quirks; void (*plat_start)(struct usb_hcd *); int (*init_quirk)(struct usb_hcd *); int (*resume_quirk)(struct usb_hcd *); }; #define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv) +#define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv) #endif /* _XHCI_PLAT_H */ diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 671bce18782c..c1025d321a41 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -104,16 +104,7 @@ static int xhci_rcar_is_gen2(struct device *dev) return of_device_is_compatible(node, "renesas,xhci-r8a7790") || of_device_is_compatible(node, "renesas,xhci-r8a7791") || of_device_is_compatible(node, "renesas,xhci-r8a7793") || - of_device_is_compatible(node, "renensas,rcar-gen2-xhci"); -} - -static int xhci_rcar_is_gen3(struct device *dev) -{ - struct device_node *node = dev->of_node; - - return of_device_is_compatible(node, "renesas,xhci-r8a7795") || - of_device_is_compatible(node, "renesas,xhci-r8a7796") || - of_device_is_compatible(node, "renesas,rcar-gen3-xhci"); + of_device_is_compatible(node, "renesas,rcar-gen2-xhci"); } void xhci_rcar_start(struct usb_hcd *hcd) @@ -226,27 +217,13 @@ static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd) /* This function needs to initialize a "phy" of usb before */ int xhci_rcar_init_quirk(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - /* If hcd->regs is NULL, we don't just call the following function */ if (!hcd->regs) return 0; - /* - * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set - * to 1. However, these SoCs don't support 64-bit address memory - * pointers. So, this driver clears the AC64 bit of xhci->hcc_params - * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in - * xhci_gen_setup(). - */ - if (xhci_rcar_is_gen2(hcd->self.controller) || - xhci_rcar_is_gen3(hcd->self.controller)) - xhci->quirks |= XHCI_NO_64BIT_SUPPORT; - if (!xhci_rcar_wait_for_pll_active(hcd)) return -ETIMEDOUT; - xhci->quirks |= XHCI_TRUST_TX_LENGTH; return xhci_rcar_download_firmware(hcd); } diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h index 804b6ab4246f..012744a63a49 100644 --- a/drivers/usb/host/xhci-rcar.h +++ b/drivers/usb/host/xhci-rcar.h @@ -31,4 +31,25 @@ static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd) return 0; } #endif + +/* + * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set + * to 1. However, these SoCs don't support 64-bit address memory + * pointers. So, this driver clears the AC64 bit of xhci->hcc_params + * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in + * xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk. + * + * And, since the firmware/internal CPU control the USBSTS.STS_HALT + * and the process speed is down when the roothub port enters U3, + * long delay for the handshake of STS_HALT is neeed in xhci_suspend() + * by using the XHCI_SLOW_SUSPEND quirk. + */ +#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \ + .firmware_name = firmware, \ + .quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH | \ + XHCI_SLOW_SUSPEND, \ + .init_quirk = xhci_rcar_init_quirk, \ + .plat_start = xhci_rcar_start, \ + .resume_quirk = xhci_rcar_resume_quirk, + #endif /* _XHCI_RCAR_H */ diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index dafc65911fc0..2ff7c911fbd0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1194,6 +1194,16 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra_xusb_config(tegra, regs); + /* + * The XUSB Falcon microcontroller can only address 40 bits, so set + * the DMA mask accordingly. + */ + err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40)); + if (err < 0) { + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); + goto put_rpm; + } + err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 248cd7a8b163..500865975687 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3089,8 +3089,18 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, return; udev = (struct usb_device *) host_ep->hcpriv; vdev = xhci->devs[udev->slot_id]; + + /* + * vdev may be lost due to xHC restore error and re-initialization + * during S3/S4 resume. A new vdev will be allocated later by + * xhci_discover_or_reset_device() + */ + if (!udev->slot_id || !vdev) + return; ep_index = xhci_get_endpoint_index(&host_ep->desc); ep = &vdev->eps[ep_index]; + if (!ep) + return; /* Bail out if toggle is already being cleared by a endpoint reset */ if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) { @@ -3804,7 +3814,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING; del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); } - xhci_debugfs_remove_slot(xhci, udev->slot_id); virt_dev->udev = NULL; ret = xhci_disable_slot(xhci, udev->slot_id); if (ret) @@ -3822,6 +3831,8 @@ int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id) if (!command) return -ENOMEM; + xhci_debugfs_remove_slot(xhci, slot_id); + spin_lock_irqsave(&xhci->lock, flags); /* Don't disable the slot if the host controller is dead. */ state = readl(&xhci->op_regs->status); @@ -5207,7 +5218,7 @@ static const struct hc_driver xhci_hc_driver = { * generic hardware linkage */ .irq = xhci_irq, - .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB3 | HCD_SHARED, /* * basic lifecycle operations diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7a264962a1a9..f9f88626a57a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2175,7 +2175,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb) if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && - !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) && + !urb->num_sgs) return true; return false; @@ -2336,12 +2337,13 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, break; case TRB_RESET_EP: sprintf(str, - "%s: ctx %08x%08x slot %d ep %d flags %c", + "%s: ctx %08x%08x slot %d ep %d flags %c:%c", xhci_trb_type_string(type), field1, field0, TRB_TO_SLOT_ID(field3), /* Macro decrements 1, maybe it shouldn't?!? */ TRB_TO_EP_INDEX(field3) + 1, + field3 & TRB_TSP ? 'T' : 't', field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_STOP_RING: |