aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/Kconfig34
-rw-r--r--drivers/usb/host/ehci-atmel.c3
-rw-r--r--drivers/usb/host/ehci-cns3xxx.c171
-rw-r--r--drivers/usb/host/ehci-dbg.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c35
-rw-r--r--drivers/usb/host/ehci-msm.c345
-rw-r--r--drivers/usb/host/ehci-mxc.c73
-rw-r--r--drivers/usb/host/ehci-omap.c316
-rw-r--r--drivers/usb/host/ehci-pci.c39
-rw-r--r--drivers/usb/host/ehci-sched.c79
-rw-r--r--drivers/usb/host/ehci-sh.c243
-rw-r--r--drivers/usb/host/ehci-spear.c212
-rw-r--r--drivers/usb/host/ehci-vt8500.c172
-rw-r--r--drivers/usb/host/ehci-w90x900.c3
-rw-r--r--drivers/usb/host/ehci-xilinx-of.c1
-rw-r--r--drivers/usb/host/ehci.h1
-rw-r--r--drivers/usb/host/ohci-cns3xxx.c165
-rw-r--r--drivers/usb/host/ohci-hcd.c13
-rw-r--r--drivers/usb/host/ohci-omap3.c2
-rw-r--r--drivers/usb/host/ohci-sh.c2
-rw-r--r--drivers/usb/host/ohci-spear.c240
-rw-r--r--drivers/usb/host/uhci-hcd.c2
-rw-r--r--drivers/usb/host/uhci-q.c12
-rw-r--r--drivers/usb/host/whci/hcd.c2
24 files changed, 2060 insertions, 107 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6f4f8e6a40c7..24046c0f5878 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -133,6 +133,25 @@ config USB_EHCI_MXC
---help---
Variation of ARC USB block used in some Freescale chips.
+config USB_EHCI_HCD_OMAP
+ bool "EHCI support for OMAP3 and later chips"
+ depends on USB_EHCI_HCD && ARCH_OMAP
+ default y
+ --- help ---
+ Enables support for the on-chip EHCI controller on
+ OMAP3 and later chips.
+
+config USB_EHCI_MSM
+ bool "Support for MSM on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && ARCH_MSM
+ select USB_EHCI_ROOT_HUB_TT
+ select USB_MSM_OTG_72K
+ ---help---
+ Enables support for the USB Host controller present on the
+ Qualcomm chipsets. Root Hub has inbuilt TT.
+ This driver depends on OTG driver for PHY initialization,
+ clock management, powering up VBUS, and power management.
+
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
depends on USB_EHCI_HCD && PPC_OF
@@ -147,6 +166,14 @@ config USB_W90X900_EHCI
---help---
Enables support for the W90X900 USB controller
+config USB_CNS3XXX_EHCI
+ bool "Cavium CNS3XXX EHCI Module"
+ depends on USB_EHCI_HCD && ARCH_CNS3XXX
+ ---help---
+ Enable support for the CNS3XXX SOC's on-chip EHCI controller.
+ It is needed for high-speed (480Mbit/sec) USB 2.0 device
+ support.
+
config USB_OXU210HP_HCD
tristate "OXU210HP HCD support"
depends on USB
@@ -286,6 +313,13 @@ config USB_OHCI_HCD_SSB
If unsure, say N.
+config USB_CNS3XXX_OHCI
+ bool "Cavium CNS3XXX OHCI Module"
+ depends on USB_OHCI_HCD && ARCH_CNS3XXX
+ ---help---
+ Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+ It is needed for low-speed USB 1.0 device support.
+
config USB_OHCI_BIG_ENDIAN_DESC
bool
depends on USB_OHCI_HCD
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 51bd0edf544f..d6a69d514a84 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -99,6 +99,7 @@ static const struct hc_driver ehci_atmel_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/* scheduling support */
.get_frame_number = ehci_get_frame,
@@ -110,6 +111,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __init ehci_atmel_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
new file mode 100644
index 000000000000..708a05b5d258
--- /dev/null
+++ b/drivers/usb/host/ehci-cns3xxx.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int cns3xxx_ehci_init(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ *
+ * Set USB AHB INCR length to 16
+ */
+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
+ cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+ cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+ cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+ __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+ MISC_CHIP_CONFIG_REG);
+ }
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs
+ + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ hcd->has_tt = 0;
+ ehci_reset(ehci);
+
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci_port_power(ehci, 0);
+
+ return retval;
+}
+
+static const struct hc_driver cns3xxx_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "CNS3XXX EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .reset = cns3xxx_ehci_init,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+ .get_frame_number = ehci_get_frame,
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int cns3xxx_ehci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd;
+ const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
+ struct resource *res;
+ int irq;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no IRQ.\n");
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no register addr.\n");
+ retval = -ENODEV;
+ goto err1;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ dev_dbg(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ dev_dbg(dev, "error mapping memory\n");
+ retval = -EFAULT;
+ goto err2;
+ }
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval == 0)
+ return retval;
+
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+
+ return retval;
+}
+
+static int cns3xxx_ehci_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ */
+ if (atomic_dec_return(&usb_pwr_ref) == 0)
+ cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+ usb_put_hcd(hcd);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ehci");
+
+static struct platform_driver cns3xxx_ehci_driver = {
+ .probe = cns3xxx_ehci_probe,
+ .remove = cns3xxx_ehci_remove,
+ .driver = {
+ .name = "cns3xxx-ehci",
+ },
+};
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 6e2599661b5b..3be238a24cc5 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -879,7 +879,7 @@ static int fill_buffer(struct debug_buffer *buf)
int ret = 0;
if (!buf->output_buf)
- buf->output_buf = (char *)vmalloc(buf->alloc_size);
+ buf->output_buf = vmalloc(buf->alloc_size);
if (!buf->output_buf) {
ret = -ENOMEM;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e9062806d4a2..6fee3cd58efe 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -114,6 +114,9 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+/* for ASPM quirk of ISOC on AMD SB800 */
+static struct pci_dev *amd_nb_dev;
+
/*-------------------------------------------------------------------------*/
#include "ehci.h"
@@ -529,6 +532,11 @@ static void ehci_stop (struct usb_hcd *hcd)
spin_unlock_irq (&ehci->lock);
ehci_mem_cleanup (ehci);
+ if (amd_nb_dev) {
+ pci_dev_put(amd_nb_dev);
+ amd_nb_dev = NULL;
+ }
+
#ifdef EHCI_STATS
ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
@@ -1166,12 +1174,17 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_mxc_driver
#endif
+#ifdef CONFIG_CPU_SUBTYPE_SH7786
+#include "ehci-sh.c"
+#define PLATFORM_DRIVER ehci_hcd_sh_driver
+#endif
+
#ifdef CONFIG_SOC_AU1200
#include "ehci-au1xxx.c"
#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
#endif
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_USB_EHCI_HCD_OMAP
#include "ehci-omap.c"
#define PLATFORM_DRIVER ehci_hcd_omap_driver
#endif
@@ -1216,6 +1229,26 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_octeon_driver
#endif
+#ifdef CONFIG_USB_CNS3XXX_EHCI
+#include "ehci-cns3xxx.c"
+#define PLATFORM_DRIVER cns3xxx_ehci_driver
+#endif
+
+#ifdef CONFIG_ARCH_VT8500
+#include "ehci-vt8500.c"
+#define PLATFORM_DRIVER vt8500_ehci_driver
+#endif
+
+#ifdef CONFIG_PLAT_SPEAR
+#include "ehci-spear.c"
+#define PLATFORM_DRIVER spear_ehci_hcd_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_MSM
+#include "ehci-msm.c"
+#define PLATFORM_DRIVER ehci_msm_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
new file mode 100644
index 000000000000..413f4deca532
--- /dev/null
+++ b/drivers/usb/host/ehci-msm.c
@@ -0,0 +1,345 @@
+/* ehci-msm.c - HSUSB Host Controller Driver Implementation
+ *
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Partly derived from ehci-fsl.c and ehci-hcd.c
+ * Copyright (c) 2000-2004 by David Brownell
+ * Copyright (c) 2005 MontaVista Software
+ *
+ * All source code in this file is licensed under the following license except
+ * where indicated.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, you can find it at http://www.fsf.org
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/msm_hsusb_hw.h>
+
+#define MSM_USB_BASE (hcd->regs)
+
+static struct otg_transceiver *otg;
+
+/*
+ * ehci_run defined in drivers/usb/host/ehci-hcd.c reset the controller and
+ * the configuration settings in ehci_msm_reset vanish after controller is
+ * reset. Resetting the controler in ehci_run seems to be un-necessary
+ * provided HCD reset the controller before calling ehci_run. Most of the HCD
+ * do but some are not. So this function is same as ehci_run but we don't
+ * reset the controller here.
+ */
+static int ehci_msm_run(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 temp;
+ u32 hcc_params;
+
+ hcd->uses_new_polling = 1;
+
+ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+ ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+ /*
+ * hcc_params controls whether ehci->regs->segment must (!!!)
+ * be used; it constrains QH/ITD/SITD and QTD locations.
+ * pci_pool consistent memory always uses segment zero.
+ * streaming mappings for I/O buffers, like pci_map_single(),
+ * can return segments above 4GB, if the device allows.
+ *
+ * NOTE: the dma mask is visible through dma_supported(), so
+ * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+ * Scsi_Host.highmem_io, and so forth. It's readonly to all
+ * host side drivers though.
+ */
+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+ if (HCC_64BIT_ADDR(hcc_params))
+ ehci_writel(ehci, 0, &ehci->regs->segment);
+
+ /*
+ * Philips, Intel, and maybe others need CMD_RUN before the
+ * root hub will detect new devices (why?); NEC doesn't
+ */
+ ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+ ehci->command |= CMD_RUN;
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ dbg_cmd(ehci, "init", ehci->command);
+
+ /*
+ * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+ * are explicitly handed to companion controller(s), so no TT is
+ * involved with the root hub. (Except where one is integrated,
+ * and there's no companion controller unless maybe for USB OTG.)
+ *
+ * Turning on the CF flag will transfer ownership of all ports
+ * from the companions to the EHCI controller. If any of the
+ * companions are in the middle of a port reset at the time, it
+ * could cause trouble. Write-locking ehci_cf_port_reset_rwsem
+ * guarantees that no resets are in progress. After we set CF,
+ * a short delay lets the hardware catch up; new resets shouldn't
+ * be started before the port switching actions could complete.
+ */
+ down_write(&ehci_cf_port_reset_rwsem);
+ hcd->state = HC_STATE_RUNNING;
+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+ usleep_range(5000, 5500);
+ up_write(&ehci_cf_port_reset_rwsem);
+ ehci->last_periodic_enable = ktime_get_real();
+
+ temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ ehci_info(ehci,
+ "USB %x.%x started, EHCI %x.%02x%s\n",
+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+ temp >> 8, temp & 0xff,
+ ignore_oc ? ", overcurrent ignored" : "");
+
+ ehci_writel(ehci, INTR_MASK,
+ &ehci->regs->intr_enable); /* Turn On Interrupts */
+
+ /* GRR this is run-once init(), being done every time the HC starts.
+ * So long as they're part of class devices, we can't do it init()
+ * since the class device isn't created that early.
+ */
+ create_debug_files(ehci);
+ create_companion_file(ehci);
+
+ return 0;
+}
+
+static int ehci_msm_reset(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ ehci->caps = USB_CAPLENGTH;
+ ehci->regs = USB_CAPLENGTH +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+ /* cache the data to minimize the chip reads*/
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ hcd->has_tt = 1;
+ ehci->sbrn = HCD_USB2;
+
+ /* data structure init */
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ retval = ehci_reset(ehci);
+ if (retval)
+ return retval;
+
+ /* bursts of unspecified length. */
+ writel(0, USB_AHBBURST);
+ /* Use the AHB transactor */
+ writel(0, USB_AHBMODE);
+ /* Disable streaming mode and select host mode */
+ writel(0x13, USB_USBMODE);
+
+ ehci_port_power(ehci, 1);
+ return 0;
+}
+
+static struct hc_driver msm_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Qualcomm On-Chip EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_USB2 | HCD_MEMORY,
+
+ .reset = ehci_msm_reset,
+ .start = ehci_msm_run,
+
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ /*
+ * PM support
+ */
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+};
+
+static int ehci_msm_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct resource *res;
+ int ret;
+
+ dev_dbg(&pdev->dev, "ehci_msm proble\n");
+
+ hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd) {
+ dev_err(&pdev->dev, "Unable to create HCD\n");
+ return -ENOMEM;
+ }
+
+ hcd->irq = platform_get_irq(pdev, 0);
+ if (hcd->irq < 0) {
+ dev_err(&pdev->dev, "Unable to get IRQ resource\n");
+ ret = hcd->irq;
+ goto put_hcd;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Unable to get memory resource\n");
+ ret = -ENODEV;
+ goto put_hcd;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto put_hcd;
+ }
+
+ /*
+ * OTG driver takes care of PHY initialization, clock management,
+ * powering up VBUS, mapping of registers address space and power
+ * management.
+ */
+ otg = otg_get_transceiver();
+ if (!otg) {
+ dev_err(&pdev->dev, "unable to find transceiver\n");
+ ret = -ENODEV;
+ goto unmap;
+ }
+
+ ret = otg_set_host(otg, &hcd->self);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register with transceiver\n");
+ goto put_transceiver;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+ /*
+ * OTG device parent of HCD takes care of putting
+ * hardware into low power mode.
+ */
+ pm_runtime_no_callbacks(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+put_transceiver:
+ otg_put_transceiver(otg);
+unmap:
+ iounmap(hcd->regs);
+put_hcd:
+ usb_put_hcd(hcd);
+
+ return ret;
+}
+
+static int __devexit ehci_msm_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ device_init_wakeup(&pdev->dev, 0);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+
+ otg_set_host(otg, NULL);
+ otg_put_transceiver(otg);
+
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ehci_msm_pm_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ bool wakeup = device_may_wakeup(dev);
+
+ dev_dbg(dev, "ehci-msm PM suspend\n");
+
+ /*
+ * EHCI helper function has also the same check before manipulating
+ * port wakeup flags. We do check here the same condition before
+ * calling the same helper function to avoid bringing hardware
+ * from Low power mode when there is no need for adjusting port
+ * wakeup flags.
+ */
+ if (hcd->self.root_hub->do_remote_wakeup && !wakeup) {
+ pm_runtime_resume(dev);
+ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+ wakeup);
+ }
+
+ return 0;
+}
+
+static int ehci_msm_pm_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "ehci-msm PM resume\n");
+ ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
+
+ return 0;
+}
+#else
+#define ehci_msm_pm_suspend NULL
+#define ehci_msm_pm_resume NULL
+#endif
+
+static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
+ .suspend = ehci_msm_pm_suspend,
+ .resume = ehci_msm_pm_resume,
+};
+
+static struct platform_driver ehci_msm_driver = {
+ .probe = ehci_msm_probe,
+ .remove = __devexit_p(ehci_msm_remove),
+ .driver = {
+ .name = "msm_hsusb_host",
+ .pm = &ehci_msm_dev_pm_ops,
+ },
+};
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index bce85055019a..fa59b26fc5bc 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -28,7 +28,7 @@
#define ULPI_VIEWPORT_OFFSET 0x170
struct ehci_mxc_priv {
- struct clk *usbclk, *ahbclk;
+ struct clk *usbclk, *ahbclk, *phy1clk;
struct usb_hcd *hcd;
};
@@ -36,14 +36,8 @@ struct ehci_mxc_priv {
static int ehci_mxc_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- struct device *dev = hcd->self.controller;
- struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev);
int retval;
- /* EHCI registers start at offset 0x100 */
- ehci->caps = hcd->regs + 0x100;
- ehci->regs = hcd->regs + 0x100 +
- HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
@@ -65,12 +59,6 @@ static int ehci_mxc_setup(struct usb_hcd *hcd)
ehci_reset(ehci);
- /* set up the PORTSCx register */
- ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
-
- /* is this really needed? */
- msleep(10);
-
ehci_port_power(ehci, 0);
return 0;
}
@@ -100,6 +88,7 @@ static const struct hc_driver ehci_mxc_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
@@ -115,6 +104,8 @@ static const struct hc_driver ehci_mxc_hc_driver = {
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_mxc_drv_probe(struct platform_device *pdev)
@@ -125,6 +116,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
int irq, ret;
struct ehci_mxc_priv *priv;
struct device *dev = &pdev->dev;
+ struct ehci_hcd *ehci;
dev_info(&pdev->dev, "initializing i.MX USB Controller\n");
@@ -168,17 +160,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
goto err_ioremap;
}
- /* call platform specific init function */
- if (pdata->init) {
- ret = pdata->init(pdev);
- if (ret) {
- dev_err(dev, "platform init failed\n");
- goto err_init;
- }
- /* platforms need some time to settle changed IO settings */
- mdelay(10);
- }
-
/* enable clocks */
priv->usbclk = clk_get(dev, "usb");
if (IS_ERR(priv->usbclk)) {
@@ -196,11 +177,46 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
clk_enable(priv->ahbclk);
}
+ /* "dr" device has its own clock */
+ if (pdev->id == 0) {
+ priv->phy1clk = clk_get(dev, "usb_phy1");
+ if (IS_ERR(priv->phy1clk)) {
+ ret = PTR_ERR(priv->phy1clk);
+ goto err_clk_phy;
+ }
+ clk_enable(priv->phy1clk);
+ }
+
+
+ /* call platform specific init function */
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret) {
+ dev_err(dev, "platform init failed\n");
+ goto err_init;
+ }
+ /* platforms need some time to settle changed IO settings */
+ mdelay(10);
+ }
+
/* setup specific usb hw */
ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
if (ret < 0)
goto err_init;
+ ehci = hcd_to_ehci(hcd);
+
+ /* EHCI registers start at offset 0x100 */
+ ehci->caps = hcd->regs + 0x100;
+ ehci->regs = hcd->regs + 0x100 +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+ /* set up the PORTSCx register */
+ ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
+
+ /* is this really needed? */
+ msleep(10);
+
/* Initialize the transceiver */
if (pdata->otg) {
pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
@@ -230,6 +246,11 @@ err_add:
if (pdata && pdata->exit)
pdata->exit(pdev);
err_init:
+ if (priv->phy1clk) {
+ clk_disable(priv->phy1clk);
+ clk_put(priv->phy1clk);
+ }
+err_clk_phy:
if (priv->ahbclk) {
clk_disable(priv->ahbclk);
clk_put(priv->ahbclk);
@@ -273,6 +294,10 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
clk_disable(priv->ahbclk);
clk_put(priv->ahbclk);
}
+ if (priv->phy1clk) {
+ clk_disable(priv->phy1clk);
+ clk_put(priv->phy1clk);
+ }
kfree(priv);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 116ae280053a..680f2ef4e59f 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -1,11 +1,12 @@
/*
- * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
+ * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
*
- * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
- * Tested on OMAP3430 ES2.0 SDP
+ * Bus Glue for the EHCI controllers in OMAP3/4
+ * Tested on several OMAP3 boards, and OMAP4 Pandaboard
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
* Author: Vikram Pandita <vikram.pandita@ti.com>
+ * Author: Anand Gadiyar <gadiyar@ti.com>
*
* Copyright (C) 2009 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -26,11 +27,14 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * TODO (last updated Feb 12, 2010):
+ * TODO (last updated Nov 21, 2010):
* - add kernel-doc
* - enable AUTOIDLE
* - add suspend/resume
* - move workarounds to board-files
+ * - factor out code common to OHCI
+ * - add HSIC and TLL support
+ * - convert to use hwmod and runtime PM
*/
#include <linux/platform_device.h>
@@ -86,9 +90,9 @@
#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
#define OMAP_TLL_CHANNEL_COUNT 3
-#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 1)
-#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 2)
-#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 4)
+#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0)
+#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1)
+#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2)
/* UHH Register Set */
#define OMAP_UHH_REVISION (0x00)
@@ -114,6 +118,23 @@
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
+
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR (3 << 16)
+#define OMAP4_P1_MODE_TLL (1 << 16)
+#define OMAP4_P1_MODE_HSIC (3 << 16)
+#define OMAP4_P2_MODE_CLEAR (3 << 18)
+#define OMAP4_P2_MODE_TLL (1 << 18)
+#define OMAP4_P2_MODE_HSIC (3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT 2
+
#define OMAP_UHH_DEBUG_CSR (0x44)
/* EHCI Register Set */
@@ -127,6 +148,17 @@
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_EHCI_REV1 0x00000010 /* OMAP3 */
+#define OMAP_EHCI_REV2 0x50700100 /* OMAP4 */
+
+#define is_omap_ehci_rev1(x) (x->omap_ehci_rev == OMAP_EHCI_REV1)
+#define is_omap_ehci_rev2(x) (x->omap_ehci_rev == OMAP_EHCI_REV2)
+
+#define is_ehci_phy_mode(x) (x == EHCI_HCD_OMAP_MODE_PHY)
+#define is_ehci_tll_mode(x) (x == EHCI_HCD_OMAP_MODE_TLL)
+#define is_ehci_hsic_mode(x) (x == EHCI_HCD_OMAP_MODE_HSIC)
+
/*-------------------------------------------------------------------------*/
static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
@@ -156,10 +188,14 @@ struct ehci_hcd_omap {
struct device *dev;
struct clk *usbhost_ick;
- struct clk *usbhost2_120m_fck;
- struct clk *usbhost1_48m_fck;
+ struct clk *usbhost_hs_fck;
+ struct clk *usbhost_fs_fck;
struct clk *usbtll_fck;
struct clk *usbtll_ick;
+ struct clk *xclk60mhsp1_ck;
+ struct clk *xclk60mhsp2_ck;
+ struct clk *utmi_p1_fck;
+ struct clk *utmi_p2_fck;
/* FIXME the following two workarounds are
* board specific not silicon-specific so these
@@ -176,6 +212,9 @@ struct ehci_hcd_omap {
/* phy reset workaround */
int phy_reset;
+ /* IP revision */
+ u32 omap_ehci_rev;
+
/* desired phy_mode: TLL, PHY */
enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
@@ -191,13 +230,14 @@ struct ehci_hcd_omap {
/*-------------------------------------------------------------------------*/
-static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask,
+ u8 tll_channel_count)
{
unsigned reg;
int i;
/* Program the 3 TLL channels upfront */
- for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+ for (i = 0; i < tll_channel_count; i++) {
reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
/* Disable AutoIdle, BitStuffing and use SDR Mode */
@@ -217,7 +257,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
/* Enable channels now */
- for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+ for (i = 0; i < tll_channel_count; i++) {
reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
/* Enable only the reg that is needed */
@@ -286,19 +326,19 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
}
clk_enable(omap->usbhost_ick);
- omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
- if (IS_ERR(omap->usbhost2_120m_fck)) {
- ret = PTR_ERR(omap->usbhost2_120m_fck);
+ omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck");
+ if (IS_ERR(omap->usbhost_hs_fck)) {
+ ret = PTR_ERR(omap->usbhost_hs_fck);
goto err_host_120m_fck;
}
- clk_enable(omap->usbhost2_120m_fck);
+ clk_enable(omap->usbhost_hs_fck);
- omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
- if (IS_ERR(omap->usbhost1_48m_fck)) {
- ret = PTR_ERR(omap->usbhost1_48m_fck);
+ omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck");
+ if (IS_ERR(omap->usbhost_fs_fck)) {
+ ret = PTR_ERR(omap->usbhost_fs_fck);
goto err_host_48m_fck;
}
- clk_enable(omap->usbhost1_48m_fck);
+ clk_enable(omap->usbhost_fs_fck);
if (omap->phy_reset) {
/* Refer: ISSUE1 */
@@ -333,6 +373,80 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
}
clk_enable(omap->usbtll_ick);
+ omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base,
+ OMAP_UHH_REVISION);
+ dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n",
+ omap->omap_ehci_rev);
+
+ /*
+ * Enable per-port clocks as needed (newer controllers only).
+ * - External ULPI clock for PHY mode
+ * - Internal clocks for TLL and HSIC modes (TODO)
+ */
+ if (is_omap_ehci_rev2(omap)) {
+ switch (omap->port_mode[0]) {
+ case EHCI_HCD_OMAP_MODE_PHY:
+ omap->xclk60mhsp1_ck = clk_get(omap->dev,
+ "xclk60mhsp1_ck");
+ if (IS_ERR(omap->xclk60mhsp1_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp1_ck);
+ dev_err(omap->dev,
+ "Unable to get Port1 ULPI clock\n");
+ }
+
+ omap->utmi_p1_fck = clk_get(omap->dev,
+ "utmi_p1_gfclk");
+ if (IS_ERR(omap->utmi_p1_fck)) {
+ ret = PTR_ERR(omap->utmi_p1_fck);
+ dev_err(omap->dev,
+ "Unable to get utmi_p1_fck\n");
+ }
+
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->xclk60mhsp1_ck);
+ if (ret != 0) {
+ dev_err(omap->dev,
+ "Unable to set P1 f-clock\n");
+ }
+ break;
+ case EHCI_HCD_OMAP_MODE_TLL:
+ /* TODO */
+ default:
+ break;
+ }
+ switch (omap->port_mode[1]) {
+ case EHCI_HCD_OMAP_MODE_PHY:
+ omap->xclk60mhsp2_ck = clk_get(omap->dev,
+ "xclk60mhsp2_ck");
+ if (IS_ERR(omap->xclk60mhsp2_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp2_ck);
+ dev_err(omap->dev,
+ "Unable to get Port2 ULPI clock\n");
+ }
+
+ omap->utmi_p2_fck = clk_get(omap->dev,
+ "utmi_p2_gfclk");
+ if (IS_ERR(omap->utmi_p2_fck)) {
+ ret = PTR_ERR(omap->utmi_p2_fck);
+ dev_err(omap->dev,
+ "Unable to get utmi_p2_fck\n");
+ }
+
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->xclk60mhsp2_ck);
+ if (ret != 0) {
+ dev_err(omap->dev,
+ "Unable to set P2 f-clock\n");
+ }
+ break;
+ case EHCI_HCD_OMAP_MODE_TLL:
+ /* TODO */
+ default:
+ break;
+ }
+ }
+
+
/* perform TLL soft reset, and wait until reset is complete */
ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
OMAP_USBTLL_SYSCONFIG_SOFTRESET);
@@ -360,12 +474,20 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
/* Put UHH in NoIdle/NoStandby mode */
reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
- reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
- | OMAP_UHH_SYSCONFIG_SIDLEMODE
- | OMAP_UHH_SYSCONFIG_CACTIVITY
- | OMAP_UHH_SYSCONFIG_MIDLEMODE);
- reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+ if (is_omap_ehci_rev1(omap)) {
+ reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+ | OMAP_UHH_SYSCONFIG_SIDLEMODE
+ | OMAP_UHH_SYSCONFIG_CACTIVITY
+ | OMAP_UHH_SYSCONFIG_MIDLEMODE);
+ reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
+ } else if (is_omap_ehci_rev2(omap)) {
+ reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+ reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+ reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+ reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+ }
ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -376,40 +498,56 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
- if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
- reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
- if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
- reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
- if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
- reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
- /* Bypass the TLL module for PHY mode operation */
- if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
- dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
- if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
- (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
- (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
- else
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
- } else {
- dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
- if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
- else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-
- if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
- else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-
- if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
- else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+ if (is_omap_ehci_rev1(omap)) {
+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+ reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+ reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+ reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+ /* Bypass the TLL module for PHY mode operation */
+ if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+ dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
+ if (is_ehci_phy_mode(omap->port_mode[0]) ||
+ is_ehci_phy_mode(omap->port_mode[1]) ||
+ is_ehci_phy_mode(omap->port_mode[2]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+ else
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+ } else {
+ dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
+ if (is_ehci_phy_mode(omap->port_mode[0]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+ else if (is_ehci_tll_mode(omap->port_mode[0]))
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+
+ if (is_ehci_phy_mode(omap->port_mode[1]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+ else if (is_ehci_tll_mode(omap->port_mode[1]))
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+
+ if (is_ehci_phy_mode(omap->port_mode[2]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+ else if (is_ehci_tll_mode(omap->port_mode[2]))
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+ }
+ } else if (is_omap_ehci_rev2(omap)) {
+ /* Clear port mode fields for PHY mode*/
+ reg &= ~OMAP4_P1_MODE_CLEAR;
+ reg &= ~OMAP4_P2_MODE_CLEAR;
+
+ if (is_ehci_tll_mode(omap->port_mode[0]))
+ reg |= OMAP4_P1_MODE_TLL;
+ else if (is_ehci_hsic_mode(omap->port_mode[0]))
+ reg |= OMAP4_P1_MODE_HSIC;
+ if (is_ehci_tll_mode(omap->port_mode[1]))
+ reg |= OMAP4_P2_MODE_TLL;
+ else if (is_ehci_hsic_mode(omap->port_mode[1]))
+ reg |= OMAP4_P2_MODE_HSIC;
}
+
ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
@@ -438,7 +576,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
/* Enable UTMI mode for required TLL channels */
- omap_usb_utmi_init(omap, tll_ch_mask);
+ omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT);
}
if (omap->phy_reset) {
@@ -464,6 +602,14 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
return 0;
err_sys_status:
+ clk_disable(omap->utmi_p2_fck);
+ clk_put(omap->utmi_p2_fck);
+ clk_disable(omap->xclk60mhsp2_ck);
+ clk_put(omap->xclk60mhsp2_ck);
+ clk_disable(omap->utmi_p1_fck);
+ clk_put(omap->utmi_p1_fck);
+ clk_disable(omap->xclk60mhsp1_ck);
+ clk_put(omap->xclk60mhsp1_ck);
clk_disable(omap->usbtll_ick);
clk_put(omap->usbtll_ick);
@@ -472,8 +618,8 @@ err_tll_ick:
clk_put(omap->usbtll_fck);
err_tll_fck:
- clk_disable(omap->usbhost1_48m_fck);
- clk_put(omap->usbhost1_48m_fck);
+ clk_disable(omap->usbhost_fs_fck);
+ clk_put(omap->usbhost_fs_fck);
if (omap->phy_reset) {
if (gpio_is_valid(omap->reset_gpio_port[0]))
@@ -484,8 +630,8 @@ err_tll_fck:
}
err_host_48m_fck:
- clk_disable(omap->usbhost2_120m_fck);
- clk_put(omap->usbhost2_120m_fck);
+ clk_disable(omap->usbhost_hs_fck);
+ clk_put(omap->usbhost_hs_fck);
err_host_120m_fck:
clk_disable(omap->usbhost_ick);
@@ -503,6 +649,8 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
/* Reset OMAP modules for insmod/rmmod to work */
ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+ is_omap_ehci_rev2(omap) ?
+ OMAP4_UHH_SYSCONFIG_SOFTRESET :
OMAP_UHH_SYSCONFIG_SOFTRESET);
while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
& (1 << 0))) {
@@ -550,16 +698,16 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
omap->usbhost_ick = NULL;
}
- if (omap->usbhost1_48m_fck != NULL) {
- clk_disable(omap->usbhost1_48m_fck);
- clk_put(omap->usbhost1_48m_fck);
- omap->usbhost1_48m_fck = NULL;
+ if (omap->usbhost_fs_fck != NULL) {
+ clk_disable(omap->usbhost_fs_fck);
+ clk_put(omap->usbhost_fs_fck);
+ omap->usbhost_fs_fck = NULL;
}
- if (omap->usbhost2_120m_fck != NULL) {
- clk_disable(omap->usbhost2_120m_fck);
- clk_put(omap->usbhost2_120m_fck);
- omap->usbhost2_120m_fck = NULL;
+ if (omap->usbhost_hs_fck != NULL) {
+ clk_disable(omap->usbhost_hs_fck);
+ clk_put(omap->usbhost_hs_fck);
+ omap->usbhost_hs_fck = NULL;
}
if (omap->usbtll_ick != NULL) {
@@ -568,6 +716,32 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
omap->usbtll_ick = NULL;
}
+ if (is_omap_ehci_rev2(omap)) {
+ if (omap->xclk60mhsp1_ck != NULL) {
+ clk_disable(omap->xclk60mhsp1_ck);
+ clk_put(omap->xclk60mhsp1_ck);
+ omap->xclk60mhsp1_ck = NULL;
+ }
+
+ if (omap->utmi_p1_fck != NULL) {
+ clk_disable(omap->utmi_p1_fck);
+ clk_put(omap->utmi_p1_fck);
+ omap->utmi_p1_fck = NULL;
+ }
+
+ if (omap->xclk60mhsp2_ck != NULL) {
+ clk_disable(omap->xclk60mhsp2_ck);
+ clk_put(omap->xclk60mhsp2_ck);
+ omap->xclk60mhsp2_ck = NULL;
+ }
+
+ if (omap->utmi_p2_fck != NULL) {
+ clk_disable(omap->utmi_p2_fck);
+ clk_put(omap->utmi_p2_fck);
+ omap->utmi_p2_fck = NULL;
+ }
+ }
+
if (omap->phy_reset) {
if (gpio_is_valid(omap->reset_gpio_port[0]))
gpio_free(omap->reset_gpio_port[0]);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 655f3c9f88bf..76179c39c0e3 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -22,6 +22,9 @@
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
+/* defined here to avoid adding to pci_ids.h for single instance use */
+#define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70
+
/*-------------------------------------------------------------------------*/
/* called after powerup, by probe or system-pm "wakeup" */
@@ -41,6 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
return 0;
}
+static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci)
+{
+ struct pci_dev *amd_smbus_dev;
+ u8 rev = 0;
+
+ amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+ if (!amd_smbus_dev)
+ return 0;
+
+ pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+ if (rev < 0x40) {
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+ return 0;
+ }
+
+ if (!amd_nb_dev)
+ amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+ if (!amd_nb_dev)
+ ehci_err(ehci, "QUIRK: unable to get AMD NB device\n");
+
+ ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n");
+
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+
+ return 1;
+}
+
/* called during probe() after chip reset completes */
static int ehci_pci_setup(struct usb_hcd *hcd)
{
@@ -99,6 +131,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ if (ehci_quirk_amd_SB800(ehci))
+ ehci->amd_l1_fix = 1;
+
retval = ehci_halt(ehci);
if (retval)
return retval;
@@ -137,6 +172,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
ehci_info(ehci, "disable lpm for langwell/penwell\n");
ehci->has_lpm = 0;
}
+ if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) {
+ hcd->has_tt = 1;
+ tdi_reset(ehci);
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index d9f78eb26572..aa46f57f9ec8 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1590,6 +1590,63 @@ itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd)
*hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
}
+#define AB_REG_BAR_LOW 0xe0
+#define AB_REG_BAR_HIGH 0xe1
+#define AB_INDX(addr) ((addr) + 0x00)
+#define AB_DATA(addr) ((addr) + 0x04)
+#define NB_PCIE_INDX_ADDR 0xe0
+#define NB_PCIE_INDX_DATA 0xe4
+#define NB_PIF0_PWRDOWN_0 0x01100012
+#define NB_PIF0_PWRDOWN_1 0x01100013
+
+static void ehci_quirk_amd_L1(struct ehci_hcd *ehci, int disable)
+{
+ u32 addr, addr_low, addr_high, val;
+
+ outb_p(AB_REG_BAR_LOW, 0xcd6);
+ addr_low = inb_p(0xcd7);
+ outb_p(AB_REG_BAR_HIGH, 0xcd6);
+ addr_high = inb_p(0xcd7);
+ addr = addr_high << 8 | addr_low;
+ outl_p(0x30, AB_INDX(addr));
+ outl_p(0x40, AB_DATA(addr));
+ outl_p(0x34, AB_INDX(addr));
+ val = inl_p(AB_DATA(addr));
+
+ if (disable) {
+ val &= ~0x8;
+ val |= (1 << 4) | (1 << 9);
+ } else {
+ val |= 0x8;
+ val &= ~((1 << 4) | (1 << 9));
+ }
+ outl_p(val, AB_DATA(addr));
+
+ if (amd_nb_dev) {
+ addr = NB_PIF0_PWRDOWN_0;
+ pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+ pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+ if (disable)
+ val &= ~(0x3f << 7);
+ else
+ val |= 0x3f << 7;
+
+ pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+
+ addr = NB_PIF0_PWRDOWN_1;
+ pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+ pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+ if (disable)
+ val &= ~(0x3f << 7);
+ else
+ val |= 0x3f << 7;
+
+ pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+ }
+
+ return;
+}
+
/* fit urb's itds into the selected schedule slot; activate as needed */
static int
itd_link_urb (
@@ -1616,6 +1673,12 @@ itd_link_urb (
urb->interval,
next_uframe >> 3, next_uframe & 0x7);
}
+
+ if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+ if (ehci->amd_l1_fix == 1)
+ ehci_quirk_amd_L1(ehci, 1);
+ }
+
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
/* fill iTDs uframe by uframe */
@@ -1740,6 +1803,11 @@ itd_complete (
(void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
+ if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+ if (ehci->amd_l1_fix == 1)
+ ehci_quirk_amd_L1(ehci, 0);
+ }
+
if (unlikely(list_is_singular(&stream->td_list))) {
ehci_to_hcd(ehci)->self.bandwidth_allocated
-= stream->bandwidth;
@@ -2025,6 +2093,12 @@ sitd_link_urb (
(next_uframe >> 3) & (ehci->periodic_size - 1),
stream->interval, hc32_to_cpu(ehci, stream->splits));
}
+
+ if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+ if (ehci->amd_l1_fix == 1)
+ ehci_quirk_amd_L1(ehci, 1);
+ }
+
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
/* fill sITDs frame by frame */
@@ -2125,6 +2199,11 @@ sitd_complete (
(void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
+ if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+ if (ehci->amd_l1_fix == 1)
+ ehci_quirk_amd_L1(ehci, 0);
+ }
+
if (list_is_singular(&stream->td_list)) {
ehci_to_hcd(ehci)->self.bandwidth_allocated
-= stream->bandwidth;
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
new file mode 100644
index 000000000000..595f70f42b52
--- /dev/null
+++ b/drivers/usb/host/ehci-sh.c
@@ -0,0 +1,243 @@
+/*
+ * SuperH EHCI host controller driver
+ *
+ * Copyright (C) 2010 Paul Mundt
+ *
+ * Based on ohci-sh.c and ehci-atmel.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct ehci_sh_priv {
+ struct clk *iclk, *fclk;
+ struct usb_hcd *hcd;
+};
+
+static int ehci_sh_reset(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int ret;
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+ &ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ ret = ehci_halt(ehci);
+ if (unlikely(ret))
+ return ret;
+
+ ret = ehci_init(hcd);
+ if (unlikely(ret))
+ return ret;
+
+ ehci->sbrn = 0x20;
+
+ ehci_reset(ehci);
+ ehci_port_power(ehci, 0);
+
+ return ret;
+}
+
+static const struct hc_driver ehci_sh_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "SuperH EHCI",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_USB2 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_sh_reset,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+
+#ifdef CONFIG_PM
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+#endif
+
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_sh_probe(struct platform_device *pdev)
+{
+ const struct hc_driver *driver = &ehci_sh_hc_driver;
+ struct resource *res;
+ struct ehci_sh_priv *priv;
+ struct usb_hcd *hcd;
+ int irq, ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Found HC with no register addr. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ ret = -ENODEV;
+ goto fail_create_hcd;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev,
+ "Found HC with no IRQ. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ ret = -ENODEV;
+ goto fail_create_hcd;
+ }
+
+ /* initialize hcd */
+ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!hcd) {
+ ret = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ dev_dbg(&pdev->dev, "controller already in use\n");
+ ret = -EBUSY;
+ goto fail_request_resource;
+ }
+
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ ret = -ENXIO;
+ goto fail_ioremap;
+ }
+
+ priv = kmalloc(sizeof(struct ehci_sh_priv), GFP_KERNEL);
+ if (!priv) {
+ dev_dbg(&pdev->dev, "error allocating priv data\n");
+ ret = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ /* These are optional, we don't care if they fail */
+ priv->fclk = clk_get(&pdev->dev, "usb_fck");
+ if (IS_ERR(priv->fclk))
+ priv->fclk = NULL;
+
+ priv->iclk = clk_get(&pdev->dev, "usb_ick");
+ if (IS_ERR(priv->iclk))
+ priv->iclk = NULL;
+
+ clk_enable(priv->fclk);
+ clk_enable(priv->iclk);
+
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to add hcd");
+ goto fail_add_hcd;
+ }
+
+ priv->hcd = hcd;
+ platform_set_drvdata(pdev, priv);
+
+ return ret;
+
+fail_add_hcd:
+ clk_disable(priv->iclk);
+ clk_disable(priv->fclk);
+
+ clk_put(priv->iclk);
+ clk_put(priv->fclk);
+
+ kfree(priv);
+fail_alloc:
+ iounmap(hcd->regs);
+fail_ioremap:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
+
+ return ret;
+}
+
+static int __exit ehci_hcd_sh_remove(struct platform_device *pdev)
+{
+ struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = priv->hcd;
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ platform_set_drvdata(pdev, NULL);
+
+ clk_disable(priv->fclk);
+ clk_disable(priv->iclk);
+
+ clk_put(priv->fclk);
+ clk_put(priv->iclk);
+
+ kfree(priv);
+
+ return 0;
+}
+
+static void ehci_hcd_sh_shutdown(struct platform_device *pdev)
+{
+ struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = priv->hcd;
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver ehci_hcd_sh_driver = {
+ .probe = ehci_hcd_sh_probe,
+ .remove = __exit_p(ehci_hcd_sh_remove),
+ .shutdown = ehci_hcd_sh_shutdown,
+ .driver = {
+ .name = "sh_ehci",
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_ALIAS("platform:sh_ehci");
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
new file mode 100644
index 000000000000..75c00873443d
--- /dev/null
+++ b/drivers/usb/host/ehci-spear.c
@@ -0,0 +1,212 @@
+/*
+* Driver for EHCI HCD on SPEAR SOC
+*
+* Copyright (C) 2010 ST Micro Electronics,
+* Deepak Sikri <deepak.sikri@st.com>
+*
+* Based on various ehci-*.c drivers
+*
+* This file is subject to the terms and conditions of the GNU General Public
+* License. See the file COPYING in the main directory of this archive for
+* more details.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct spear_ehci {
+ struct ehci_hcd ehci;
+ struct clk *clk;
+};
+
+#define to_spear_ehci(hcd) (struct spear_ehci *)hcd_to_ehci(hcd)
+
+static void spear_start_ehci(struct spear_ehci *ehci)
+{
+ clk_enable(ehci->clk);
+}
+
+static void spear_stop_ehci(struct spear_ehci *ehci)
+{
+ clk_disable(ehci->clk);
+}
+
+static int ehci_spear_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval = 0;
+
+ /* registers start at offset 0x0 */
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+ &ehci->caps->hc_capbase));
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci_reset(ehci);
+ ehci_port_power(ehci, 0);
+
+ return retval;
+}
+
+static const struct hc_driver ehci_spear_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "SPEAr EHCI",
+ .hcd_priv_size = sizeof(struct spear_ehci),
+
+ /* generic hardware linkage */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /* basic lifecycle operations */
+ .reset = ehci_spear_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /* managing i/o requests and associated device resources */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ /* scheduling support */
+ .get_frame_number = ehci_get_frame,
+
+ /* root hub support */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd ;
+ struct spear_ehci *ehci;
+ struct resource *res;
+ struct clk *usbh_clk;
+ const struct hc_driver *driver = &ehci_spear_hc_driver;
+ int *pdata = pdev->dev.platform_data;
+ int irq, retval;
+ char clk_name[20] = "usbh_clk";
+
+ if (pdata == NULL)
+ return -EFAULT;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ retval = irq;
+ goto fail_irq_get;
+ }
+
+ if (*pdata >= 0)
+ sprintf(clk_name, "usbh.%01d_clk", *pdata);
+
+ usbh_clk = clk_get(NULL, clk_name);
+ if (IS_ERR(usbh_clk)) {
+ dev_err(&pdev->dev, "Error getting interface clock\n");
+ retval = PTR_ERR(usbh_clk);
+ goto fail_get_usbh_clk;
+ }
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ retval = -ENODEV;
+ goto fail_request_resource;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ retval = -EBUSY;
+ goto fail_request_resource;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ retval = -ENOMEM;
+ goto fail_ioremap;
+ }
+
+ ehci = (struct spear_ehci *)hcd_to_ehci(hcd);
+ ehci->clk = usbh_clk;
+
+ spear_start_ehci(ehci);
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+ if (retval)
+ goto fail_add_hcd;
+
+ return retval;
+
+fail_add_hcd:
+ spear_stop_ehci(ehci);
+ iounmap(hcd->regs);
+fail_ioremap:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ clk_put(usbh_clk);
+fail_get_usbh_clk:
+fail_irq_get:
+ dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+ return retval ;
+}
+
+static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct spear_ehci *ehci_p = to_spear_ehci(hcd);
+
+ if (!hcd)
+ return 0;
+ if (in_interrupt())
+ BUG();
+ usb_remove_hcd(hcd);
+
+ if (ehci_p->clk)
+ spear_stop_ehci(ehci_p);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ if (ehci_p->clk)
+ clk_put(ehci_p->clk);
+
+ return 0;
+}
+
+static struct platform_driver spear_ehci_hcd_driver = {
+ .probe = spear_ehci_hcd_drv_probe,
+ .remove = spear_ehci_hcd_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "spear-ehci",
+ .bus = &platform_bus_type
+ }
+};
+
+MODULE_ALIAS("platform:spear-ehci");
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
new file mode 100644
index 000000000000..20168062035a
--- /dev/null
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -0,0 +1,172 @@
+/*
+ * drivers/usb/host/ehci-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on ehci-au1xxx.c
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int rc = 0;
+
+ if (!udev->parent) /* udev is root hub itself, impossible */
+ rc = -1;
+ /* we only support lpm device connected to root hub yet */
+ if (ehci->has_lpm && !udev->parent->parent) {
+ rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
+ if (!rc)
+ rc = ehci_lpm_check(ehci, udev->portnum);
+ }
+ return rc;
+}
+
+static const struct hc_driver vt8500_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "VT8500 EHCI",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_init,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ /*
+ * call back when device connected and addressed
+ */
+ .update_device = ehci_update_device,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int vt8500_ehci_drv_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct resource *res;
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+ pr_debug("resource[1] is not IORESOURCE_IRQ");
+ return -ENOMEM;
+ }
+ hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500");
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ pr_debug("request_mem_region failed");
+ ret = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ pr_debug("ioremap failed");
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+ ehci_port_power(ehci, 1);
+
+ ret = usb_add_hcd(hcd, pdev->resource[1].start,
+ IRQF_DISABLED | IRQF_SHARED);
+ if (ret == 0) {
+ platform_set_drvdata(pdev, hcd);
+ return ret;
+ }
+
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int vt8500_ehci_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver vt8500_ehci_driver = {
+ .probe = vt8500_ehci_drv_probe,
+ .remove = vt8500_ehci_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "vt8500-ehci",
+ .owner = THIS_MODULE,
+ }
+};
+
+MODULE_ALIAS("platform:vt8500-ehci");
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index cfa21ea20f82..6bc35809a5c6 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -130,6 +130,7 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
@@ -147,6 +148,8 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 6c8076ad821d..e8f4f36fdf0b 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -117,6 +117,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = {
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index ba8eab366b82..799ac16a54b4 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -131,6 +131,7 @@ struct ehci_hcd { /* one per controller */
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;
+ unsigned amd_l1_fix:1;
unsigned fs_i_thresh:1; /* Intel iso scheduling */
unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
new file mode 100644
index 000000000000..f05ef87e934c
--- /dev/null
+++ b/drivers/usb/host/ohci-cns3xxx.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int __devinit
+cns3xxx_ohci_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ *
+ * Set USB AHB INCR length to 16
+ */
+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
+ cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+ cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+ cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+ __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+ MISC_CHIP_CONFIG_REG);
+ }
+
+ ret = ohci_init(ohci);
+ if (ret < 0)
+ return ret;
+
+ ohci->num_ports = 1;
+
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ err("can't start %s", hcd->self.bus_name);
+ ohci_stop(hcd);
+ return ret;
+ }
+ return 0;
+}
+
+static const struct hc_driver cns3xxx_ohci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "CNS3XXX OHCI Host controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+ .start = cns3xxx_ohci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+ .get_frame_number = ohci_get_frame,
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int cns3xxx_ohci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd;
+ const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
+ struct resource *res;
+ int irq;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no IRQ.\n");
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ hcd = usb_create_hcd(driver, dev, dev_name(dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Found HC with no register addr.\n");
+ retval = -ENODEV;
+ goto err1;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ dev_dbg(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_dbg(dev, "error mapping memory\n");
+ retval = -EFAULT;
+ goto err2;
+ }
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval == 0)
+ return retval;
+
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+ return retval;
+}
+
+static int cns3xxx_ohci_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ /*
+ * EHCI and OHCI share the same clock and power,
+ * resetting twice would cause the 1st controller been reset.
+ * Therefore only do power up at the first up device, and
+ * power down at the last down device.
+ */
+ if (atomic_dec_return(&usb_pwr_ref) == 0)
+ cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+ usb_put_hcd(hcd);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ohci");
+
+static struct platform_driver ohci_hcd_cns3xxx_driver = {
+ .probe = cns3xxx_ohci_probe,
+ .remove = cns3xxx_ohci_remove,
+ .driver = {
+ .name = "cns3xxx-ohci",
+ },
+};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5179acb7aa2f..759a12ff8048 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -901,7 +901,8 @@ static void ohci_stop (struct usb_hcd *hcd)
ohci_dump (ohci, 1);
- flush_scheduled_work();
+ if (quirk_nec(ohci))
+ flush_work_sync(&ohci->nec_work);
ohci_usb_reset (ohci);
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
@@ -1081,6 +1082,11 @@ MODULE_LICENSE ("GPL");
#define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver
#endif
+#ifdef CONFIG_PLAT_SPEAR
+#include "ohci-spear.c"
+#define PLATFORM_DRIVER spear_ohci_hcd_driver
+#endif
+
#ifdef CONFIG_PPC_PS3
#include "ohci-ps3.c"
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
@@ -1111,6 +1117,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_octeon_driver
#endif
+#ifdef CONFIG_USB_CNS3XXX_OHCI
+#include "ohci-cns3xxx.c"
+#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
+#endif
+
#if !defined(PCI_DRIVER) && \
!defined(PLATFORM_DRIVER) && \
!defined(OMAP1_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 2cc8a504b18c..a37d5993e4e3 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -648,7 +648,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
ret = omap3_start_ohci(omap, hcd);
if (ret) {
- dev_dbg(&pdev->dev, "failed to start ehci\n");
+ dev_dbg(&pdev->dev, "failed to start ohci\n");
goto err_start;
}
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 0b35d22cc70e..f47867ff78c7 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -109,7 +109,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev)
hcd->regs = (void __iomem *)res->start;
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
- ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret != 0) {
err("Failed to add hcd");
usb_put_hcd(hcd);
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
new file mode 100644
index 000000000000..4fd4bea9ac7a
--- /dev/null
+++ b/drivers/usb/host/ohci-spear.c
@@ -0,0 +1,240 @@
+/*
+* OHCI HCD (Host Controller Driver) for USB.
+*
+* Copyright (C) 2010 ST Microelectronics.
+* Deepak Sikri<deepak.sikri@st.com>
+*
+* Based on various ohci-*.c drivers
+*
+* This file is licensed under the terms of the GNU General Public
+* License version 2. This program is licensed "as is" without any
+* warranty of any kind, whether express or implied.
+*/
+
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct spear_ohci {
+ struct ohci_hcd ohci;
+ struct clk *clk;
+};
+
+#define to_spear_ohci(hcd) (struct spear_ohci *)hcd_to_ohci(hcd)
+
+static void spear_start_ohci(struct spear_ohci *ohci)
+{
+ clk_enable(ohci->clk);
+}
+
+static void spear_stop_ohci(struct spear_ohci *ohci)
+{
+ clk_disable(ohci->clk);
+}
+
+static int __devinit ohci_spear_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ ret = ohci_init(ohci);
+ if (ret < 0)
+ return ret;
+ ohci->regs = hcd->regs;
+
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ dev_err(hcd->self.controller, "can't start\n");
+ ohci_stop(hcd);
+ return ret;
+ }
+
+ create_debug_files(ohci);
+
+#ifdef DEBUG
+ ohci_dump(ohci, 1);
+#endif
+ return 0;
+}
+
+static const struct hc_driver ohci_spear_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "SPEAr OHCI",
+ .hcd_priv_size = sizeof(struct spear_ohci),
+
+ /* generic hardware linkage */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /* basic lifecycle operations */
+ .start = ohci_spear_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+
+ /* managing i/o requests and associated device resources */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /* scheduling support */
+ .get_frame_number = ohci_get_frame,
+
+ /* root hub support */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
+{
+ const struct hc_driver *driver = &ohci_spear_hc_driver;
+ struct usb_hcd *hcd = NULL;
+ struct clk *usbh_clk;
+ struct spear_ohci *ohci_p;
+ struct resource *res;
+ int retval, irq;
+ int *pdata = pdev->dev.platform_data;
+ char clk_name[20] = "usbh_clk";
+
+ if (pdata == NULL)
+ return -EFAULT;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ retval = irq;
+ goto fail_irq_get;
+ }
+
+ if (*pdata >= 0)
+ sprintf(clk_name, "usbh.%01d_clk", *pdata);
+
+ usbh_clk = clk_get(NULL, clk_name);
+ if (IS_ERR(usbh_clk)) {
+ dev_err(&pdev->dev, "Error getting interface clock\n");
+ retval = PTR_ERR(usbh_clk);
+ goto fail_get_usbh_clk;
+ }
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ retval = -ENODEV;
+ goto fail_request_resource;
+ }
+
+ hcd->rsrc_start = pdev->resource[0].start;
+ hcd->rsrc_len = resource_size(res);
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ dev_dbg(&pdev->dev, "request_mem_region failed\n");
+ retval = -EBUSY;
+ goto fail_request_resource;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_dbg(&pdev->dev, "ioremap failed\n");
+ retval = -ENOMEM;
+ goto fail_ioremap;
+ }
+
+ ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
+ ohci_p->clk = usbh_clk;
+ spear_start_ohci(ohci_p);
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), IRQF_DISABLED);
+ if (retval == 0)
+ return retval;
+
+ spear_stop_ohci(ohci_p);
+ iounmap(hcd->regs);
+fail_ioremap:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ clk_put(usbh_clk);
+fail_get_usbh_clk:
+fail_irq_get:
+ dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+ return retval;
+}
+
+static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+ usb_remove_hcd(hcd);
+ if (ohci_p->clk)
+ spear_stop_ohci(ohci_p);
+
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ if (ohci_p->clk)
+ clk_put(ohci_p->clk);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+#if defined(CONFIG_PM)
+static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
+ pm_message_t message)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ spear_stop_ohci(ohci_p);
+ ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
+ return 0;
+}
+
+static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ spear_start_ohci(ohci_p);
+ ohci_finish_controller_resume(hcd);
+ return 0;
+}
+#endif
+
+/* Driver definition to register with the platform bus */
+static struct platform_driver spear_ohci_hcd_driver = {
+ .probe = spear_ohci_hcd_drv_probe,
+ .remove = spear_ohci_hcd_drv_remove,
+#ifdef CONFIG_PM
+ .suspend = spear_ohci_hcd_drv_suspend,
+ .resume = spear_ohci_hcd_drv_resume,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "spear-ohci",
+ },
+};
+
+MODULE_ALIAS("platform:spear-ohci");
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index f52d04db28f4..cee867829ec9 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -569,7 +569,7 @@ static int uhci_init(struct usb_hcd *hcd)
*/
static void uhci_shutdown(struct pci_dev *pdev)
{
- struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
+ struct usb_hcd *hcd = pci_get_drvdata(pdev);
uhci_hc_died(hcd_to_uhci(hcd));
}
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 2090b45eb606..af77abb5c68b 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -29,7 +29,7 @@ static void uhci_set_next_interrupt(struct uhci_hcd *uhci)
{
if (uhci->is_stopped)
mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
- uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
+ uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
}
static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
@@ -195,7 +195,9 @@ static inline void uhci_remove_td_from_frame_list(struct uhci_hcd *uhci,
} else {
struct uhci_td *ntd;
- ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
+ ntd = list_entry(td->fl_list.next,
+ struct uhci_td,
+ fl_list);
uhci->frame[td->frame] = LINK_TO_TD(ntd);
uhci->frame_cpu[td->frame] = ntd;
}
@@ -728,7 +730,7 @@ static inline struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci,
urbp->urb = urb;
urb->hcpriv = urbp;
-
+
INIT_LIST_HEAD(&urbp->node);
INIT_LIST_HEAD(&urbp->td_list);
@@ -846,7 +848,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
/* Alternate Data0/1 (start with Data1) */
destination ^= TD_TOKEN_TOGGLE;
-
+
uhci_add_td_to_urbp(td, urbp);
uhci_fill_td(td, status, destination | uhci_explen(pktsze),
data);
@@ -857,7 +859,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
}
/*
- * Build the final TD for control status
+ * Build the final TD for control status
*/
td = uhci_alloc_td(uhci);
if (!td)
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 72b6892fda67..9546f6cd01f0 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -356,7 +356,7 @@ static void __exit whci_hc_driver_exit(void)
module_exit(whci_hc_driver_exit);
/* PCI device ID's that we handle (so it gets loaded) */
-static struct pci_device_id whci_hcd_id_table[] = {
+static struct pci_device_id __used whci_hcd_id_table[] = {
{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
{ /* empty last entry */ }
};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.