aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc/usb251xb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/misc/usb251xb.c')
-rw-r--r--drivers/usb/misc/usb251xb.c177
1 files changed, 125 insertions, 52 deletions
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 135c91c434bf..a6efb9a72939 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Microchip USB251xB USB 2.0 Hi-Speed Hub Controller
* Configuration via SMBus.
@@ -7,25 +8,14 @@
* This work is based on the USB3503 driver by Dongjin Kim and
* a not-accepted patch by Fabien Lahoudere, see:
* https://patchwork.kernel.org/patch/9257715/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/nls.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/slab.h>
/* Internal Register Set Addresses & Default Values acc. to DS00001692C */
@@ -38,6 +28,7 @@
#define USB251XB_DEF_PRODUCT_ID_12 0x2512 /* USB2512B/12Bi */
#define USB251XB_DEF_PRODUCT_ID_13 0x2513 /* USB2513B/13Bi */
#define USB251XB_DEF_PRODUCT_ID_14 0x2514 /* USB2514B/14Bi */
+#define USB251XB_DEF_PRODUCT_ID_17 0x2517 /* USB2517/17i */
#define USB251XB_ADDR_DEVICE_ID_LSB 0x04
#define USB251XB_ADDR_DEVICE_ID_MSB 0x05
@@ -82,7 +73,7 @@
#define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14
#define USB251XB_ADDR_PRODUCT_STRING 0x54
-#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi"
+#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi/7i"
#define USB251XB_ADDR_SERIAL_STRING_LEN 0x15
#define USB251XB_ADDR_SERIAL_STRING 0x92
@@ -93,8 +84,10 @@
#define USB251XB_ADDR_BOOST_UP 0xF6
#define USB251XB_DEF_BOOST_UP 0x00
-#define USB251XB_ADDR_BOOST_X 0xF8
-#define USB251XB_DEF_BOOST_X 0x00
+#define USB251XB_ADDR_BOOST_57 0xF7
+#define USB251XB_DEF_BOOST_57 0x00
+#define USB251XB_ADDR_BOOST_14 0xF8
+#define USB251XB_DEF_BOOST_14 0x00
#define USB251XB_ADDR_PORT_SWAP 0xFA
#define USB251XB_DEF_PORT_SWAP 0x00
@@ -102,7 +95,11 @@
#define USB251XB_ADDR_PORT_MAP_12 0xFB
#define USB251XB_DEF_PORT_MAP_12 0x00
#define USB251XB_ADDR_PORT_MAP_34 0xFC
-#define USB251XB_DEF_PORT_MAP_34 0x00 /* USB2513B/i & USB2514B/i only */
+#define USB251XB_DEF_PORT_MAP_34 0x00 /* USB251{3B/i,4B/i,7/i} only */
+#define USB251XB_ADDR_PORT_MAP_56 0xFD
+#define USB251XB_DEF_PORT_MAP_56 0x00 /* USB2517/i only */
+#define USB251XB_ADDR_PORT_MAP_7 0xFE
+#define USB251XB_DEF_PORT_MAP_7 0x00 /* USB2517/i only */
#define USB251XB_ADDR_STATUS_COMMAND 0xFF
#define USB251XB_STATUS_COMMAND_SMBUS_DOWN 0x04
@@ -119,7 +116,7 @@ struct usb251xb {
struct device *dev;
struct i2c_client *i2c;
u8 skip_config;
- int gpio_reset;
+ struct gpio_desc *gpio_reset;
u16 vendor_id;
u16 product_id;
u16 device_id;
@@ -143,57 +140,97 @@ struct usb251xb {
char serial[USB251XB_STRING_BUFSIZE];
u8 bat_charge_en;
u8 boost_up;
- u8 boost_x;
+ u8 boost_57;
+ u8 boost_14;
u8 port_swap;
u8 port_map12;
u8 port_map34;
+ u8 port_map56;
+ u8 port_map7;
u8 status;
};
struct usb251xb_data {
u16 product_id;
+ u8 port_cnt;
+ bool led_support;
+ bool bat_support;
char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
};
static const struct usb251xb_data usb2512b_data = {
.product_id = 0x2512,
+ .port_cnt = 2,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2512B",
};
static const struct usb251xb_data usb2512bi_data = {
.product_id = 0x2512,
+ .port_cnt = 2,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2512Bi",
};
static const struct usb251xb_data usb2513b_data = {
.product_id = 0x2513,
+ .port_cnt = 3,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2513B",
};
static const struct usb251xb_data usb2513bi_data = {
.product_id = 0x2513,
+ .port_cnt = 3,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2513Bi",
};
static const struct usb251xb_data usb2514b_data = {
.product_id = 0x2514,
+ .port_cnt = 4,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2514B",
};
static const struct usb251xb_data usb2514bi_data = {
.product_id = 0x2514,
+ .port_cnt = 4,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2514Bi",
};
+static const struct usb251xb_data usb2517_data = {
+ .product_id = 0x2517,
+ .port_cnt = 7,
+ .led_support = true,
+ .bat_support = false,
+ .product_str = "USB2517",
+};
+
+static const struct usb251xb_data usb2517i_data = {
+ .product_id = 0x2517,
+ .port_cnt = 7,
+ .led_support = true,
+ .bat_support = false,
+ .product_str = "USB2517i",
+};
+
static void usb251xb_reset(struct usb251xb *hub, int state)
{
- if (!gpio_is_valid(hub->gpio_reset))
+ if (!hub->gpio_reset)
return;
- gpio_set_value_cansleep(hub->gpio_reset, state);
+ gpiod_set_value_cansleep(hub->gpio_reset, state);
/* wait for hub recovery/stabilization */
- if (state)
+ if (!state)
usleep_range(500, 750); /* >=500us at power on */
else
usleep_range(1, 10); /* >=1us at power down */
@@ -212,7 +249,7 @@ static int usb251xb_connect(struct usb251xb *hub)
i2c_wb[0] = 0x01;
i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH;
- usb251xb_reset(hub, 1);
+ usb251xb_reset(hub, 0);
err = i2c_smbus_write_i2c_block_data(hub->i2c,
USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb);
@@ -253,13 +290,16 @@ static int usb251xb_connect(struct usb251xb *hub)
USB251XB_STRING_BUFSIZE);
i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en;
i2c_wb[USB251XB_ADDR_BOOST_UP] = hub->boost_up;
- i2c_wb[USB251XB_ADDR_BOOST_X] = hub->boost_x;
+ i2c_wb[USB251XB_ADDR_BOOST_57] = hub->boost_57;
+ i2c_wb[USB251XB_ADDR_BOOST_14] = hub->boost_14;
i2c_wb[USB251XB_ADDR_PORT_SWAP] = hub->port_swap;
i2c_wb[USB251XB_ADDR_PORT_MAP_12] = hub->port_map12;
i2c_wb[USB251XB_ADDR_PORT_MAP_34] = hub->port_map34;
+ i2c_wb[USB251XB_ADDR_PORT_MAP_56] = hub->port_map56;
+ i2c_wb[USB251XB_ADDR_PORT_MAP_7] = hub->port_map7;
i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH;
- usb251xb_reset(hub, 1);
+ usb251xb_reset(hub, 0);
/* write registers */
for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) {
@@ -297,7 +337,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
int len, err, i;
- u32 *property_u32 = NULL;
+ u32 property_u32 = 0;
const u32 *cproperty_u32;
const char *cproperty_char;
char str[USB251XB_STRING_BUFSIZE / 2];
@@ -312,19 +352,13 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
else
hub->skip_config = 0;
- hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
- if (hub->gpio_reset == -EPROBE_DEFER)
+ hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (PTR_ERR(hub->gpio_reset) == -EPROBE_DEFER) {
return -EPROBE_DEFER;
- if (gpio_is_valid(hub->gpio_reset)) {
- err = devm_gpio_request_one(dev, hub->gpio_reset,
- GPIOF_OUT_INIT_LOW,
- "usb251xb reset");
- if (err) {
- dev_err(dev,
- "unable to request GPIO %d as reset pin (%d)\n",
- hub->gpio_reset, err);
- return err;
- }
+ } else if (IS_ERR(hub->gpio_reset)) {
+ err = PTR_ERR(hub->gpio_reset);
+ dev_err(dev, "unable to request GPIO reset pin (%d)\n", err);
+ return err;
}
if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1))
@@ -374,16 +408,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
if (of_get_property(np, "dynamic-power-switching", NULL))
hub->conf_data2 |= BIT(7);
- if (!of_property_read_u32(np, "oc-delay-us", property_u32)) {
- if (*property_u32 == 100) {
+ if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) {
+ if (property_u32 == 100) {
/* 100 us*/
hub->conf_data2 &= ~BIT(5);
hub->conf_data2 &= ~BIT(4);
- } else if (*property_u32 == 4000) {
+ } else if (property_u32 == 4000) {
/* 4 ms */
hub->conf_data2 &= ~BIT(5);
hub->conf_data2 |= BIT(4);
- } else if (*property_u32 == 16000) {
+ } else if (property_u32 == 16000) {
/* 16 ms */
hub->conf_data2 |= BIT(5);
hub->conf_data2 |= BIT(4);
@@ -401,6 +435,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
if (of_get_property(np, "port-mapping-mode", NULL))
hub->conf_data3 |= BIT(3);
+ if (data->led_support && of_get_property(np, "led-usb-mode", NULL))
+ hub->conf_data3 &= ~BIT(1);
+
if (of_get_property(np, "string-support", NULL))
hub->conf_data3 |= BIT(0);
@@ -410,8 +447,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
for (i = 0; i < len / sizeof(u32); i++) {
u32 port = be32_to_cpu(cproperty_u32[i]);
- if ((port >= 1) && (port <= 4))
+ if ((port >= 1) && (port <= data->port_cnt))
hub->non_rem_dev |= BIT(port);
+ else
+ dev_warn(dev, "NRD port %u doesn't exist\n",
+ port);
}
}
@@ -421,8 +461,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
for (i = 0; i < len / sizeof(u32); i++) {
u32 port = be32_to_cpu(cproperty_u32[i]);
- if ((port >= 1) && (port <= 4))
+ if ((port >= 1) && (port <= data->port_cnt))
hub->port_disable_sp |= BIT(port);
+ else
+ dev_warn(dev, "PDS port %u doesn't exist\n",
+ port);
}
}
@@ -432,14 +475,37 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
for (i = 0; i < len / sizeof(u32); i++) {
u32 port = be32_to_cpu(cproperty_u32[i]);
- if ((port >= 1) && (port <= 4))
+ if ((port >= 1) && (port <= data->port_cnt))
hub->port_disable_bp |= BIT(port);
+ else
+ dev_warn(dev, "PDB port %u doesn't exist\n",
+ port);
}
}
+ hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
+ if (!of_property_read_u32(np, "sp-max-total-current-microamp",
+ &property_u32))
+ hub->max_power_sp = min_t(u8, property_u32 / 2000, 50);
+
+ hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
+ if (!of_property_read_u32(np, "bp-max-total-current-microamp",
+ &property_u32))
+ hub->max_power_bp = min_t(u8, property_u32 / 2000, 255);
+
+ hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
+ if (!of_property_read_u32(np, "sp-max-removable-current-microamp",
+ &property_u32))
+ hub->max_current_sp = min_t(u8, property_u32 / 2000, 50);
+
+ hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
+ if (!of_property_read_u32(np, "bp-max-removable-current-microamp",
+ &property_u32))
+ hub->max_current_bp = min_t(u8, property_u32 / 2000, 255);
+
hub->power_on_time = USB251XB_DEF_POWER_ON_TIME;
- if (!of_property_read_u32(np, "power-on-time-ms", property_u32))
- hub->power_on_time = min_t(u8, *property_u32 / 2, 255);
+ if (!of_property_read_u32(np, "power-on-time-ms", &property_u32))
+ hub->power_on_time = min_t(u8, property_u32 / 2, 255);
if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1))
hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
@@ -476,16 +542,15 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
/* The following parameters are currently not exposed to devicetree, but
* may be as soon as needed.
*/
- hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
- hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
- hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
- hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
hub->boost_up = USB251XB_DEF_BOOST_UP;
- hub->boost_x = USB251XB_DEF_BOOST_X;
+ hub->boost_57 = USB251XB_DEF_BOOST_57;
+ hub->boost_14 = USB251XB_DEF_BOOST_14;
hub->port_swap = USB251XB_DEF_PORT_SWAP;
hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
+ hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
+ hub->port_map7 = USB251XB_DEF_PORT_MAP_7;
return 0;
}
@@ -510,6 +575,12 @@ static const struct of_device_id usb251xb_of_match[] = {
.compatible = "microchip,usb2514bi",
.data = &usb2514bi_data,
}, {
+ .compatible = "microchip,usb2517",
+ .data = &usb2517_data,
+ }, {
+ .compatible = "microchip,usb2517i",
+ .data = &usb2517i_data,
+ }, {
/* sentinel */
}
};
@@ -573,6 +644,8 @@ static const struct i2c_device_id usb251xb_id[] = {
{ "usb2513bi", 0 },
{ "usb2514b", 0 },
{ "usb2514bi", 0 },
+ { "usb2517", 0 },
+ { "usb2517i", 0 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, usb251xb_id);
@@ -589,5 +662,5 @@ static struct i2c_driver usb251xb_i2c_driver = {
module_i2c_driver(usb251xb_i2c_driver);
MODULE_AUTHOR("Richard Leitner <richard.leitner@skidata.com>");
-MODULE_DESCRIPTION("USB251xB/xBi USB 2.0 Hub Controller Driver");
+MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
MODULE_LICENSE("GPL");
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.