diff options
Diffstat (limited to 'drivers/usb/musb/musb_core.c')
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 41 |
1 files changed, 26 insertions, 15 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4a518ff12310..18cfc0a361cb 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -132,7 +132,7 @@ static inline struct musb *dev_to_musb(struct device *dev) /*-------------------------------------------------------------------------*/ #ifndef CONFIG_BLACKFIN -static int musb_ulpi_read(struct usb_phy *phy, u32 offset) +static int musb_ulpi_read(struct usb_phy *phy, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -151,7 +151,7 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset) * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM. */ - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR); @@ -176,7 +176,7 @@ out: return ret; } -static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) +static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -191,8 +191,8 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) power &= ~MUSB_POWER_SUSPENDM; musb_writeb(addr, MUSB_POWER, power); - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); - musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); + musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ); while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) @@ -1028,18 +1028,22 @@ void musb_start(struct musb *musb) { void __iomem *regs = musb->mregs; u8 devctl = musb_readb(regs, MUSB_DEVCTL); + u8 power; dev_dbg(musb->controller, "<== devctl %02x\n", devctl); musb_enable_interrupts(musb); musb_writeb(regs, MUSB_TESTMODE, 0); - /* put into basic highspeed mode and start session */ - musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE - | MUSB_POWER_HSENAB - /* ENSUSPEND wedges tusb */ - /* | MUSB_POWER_ENSUSPEND */ - ); + power = MUSB_POWER_ISOUPDATE; + /* + * treating UNKNOWN as unspecified maximum speed, in which case + * we will default to high-speed. + */ + if (musb->config->maximum_speed == USB_SPEED_HIGH || + musb->config->maximum_speed == USB_SPEED_UNKNOWN) + power |= MUSB_POWER_HSENAB; + musb_writeb(regs, MUSB_POWER, power); musb->is_active = 0; devctl = musb_readb(regs, MUSB_DEVCTL); @@ -1664,7 +1668,7 @@ EXPORT_SYMBOL_GPL(musb_interrupt); static bool use_dma = 1; /* "modprobe ... use_dma=0" etc */ -module_param(use_dma, bool, 0); +module_param(use_dma, bool, 0644); MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) @@ -1771,13 +1775,20 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) unsigned long flags; unsigned long val; int vbus; + u8 devctl; spin_lock_irqsave(&musb->lock, flags); val = musb->a_wait_bcon; - /* FIXME get_vbus_status() is normally #defined as false... - * and is effectively TUSB-specific. - */ vbus = musb_platform_get_vbus_status(musb); + if (vbus < 0) { + /* Use default MUSB method by means of DEVCTL register */ + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if ((devctl & MUSB_DEVCTL_VBUS) + == (3 << MUSB_DEVCTL_VBUS_SHIFT)) + vbus = 1; + else + vbus = 0; + } spin_unlock_irqrestore(&musb->lock, flags); return sprintf(buf, "Vbus %s, timeout %lu msec\n", |