diff options
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
| -rw-r--r-- | drivers/usb/serial/pl2303.c | 89 |
1 files changed, 37 insertions, 52 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 751a533a4347..ec6c132a25b5 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty, kfree(buf); } -static void pl2303_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void pl2303_dtr_rts(struct usb_serial_port *port, int on) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + /* Change DTR and RTS */ + if (on) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + else + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, control); +} + +static void pl2303_close(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = PL2303_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (pl2303_buf_data_avail(priv->buf) == 0 || - timeout == 0 || signal_pending(current) || - port->serial->disconnected) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ pl2303_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps, HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } } static int pl2303_open(struct tty_struct *tty, @@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } @@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } + port->port.drain_delay = 256; return 0; } @@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file) return result; } +static int pl2303_carrier_raised(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & UART_DCD) + return 1; + return 0; +} + static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) { struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -897,7 +878,7 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) dbg("%s - error sending break = %d", __func__, result); } -static void pl2303_shutdown(struct usb_serial *serial) +static void pl2303_release(struct usb_serial *serial) { int i; struct pl2303_private *priv; @@ -909,7 +890,6 @@ static void pl2303_shutdown(struct usb_serial *serial) if (priv) { pl2303_buf_free(priv->buf); kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); } } } @@ -946,6 +926,8 @@ static void pl2303_update_line_status(struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); priv->line_status = data[status_idx]; spin_unlock_irqrestore(&priv->lock, flags); + if (priv->line_status & UART_BREAK_ERROR) + usb_serial_handle_break(port); wake_up_interruptible(&priv->delta_msr_wait); } @@ -1056,7 +1038,8 @@ static void pl2303_read_bulk_callback(struct urb *urb) if (line_status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); for (i = 0; i < urb->actual_length; ++i) - tty_insert_flip_char(tty, data[i], tty_flag); + if (!usb_serial_handle_sysrq_char(port, data[i])) + tty_insert_flip_char(tty, data[i], tty_flag); tty_flip_buffer_push(tty); } tty_kref_put(tty); @@ -1125,6 +1108,8 @@ static struct usb_serial_driver pl2303_device = { .num_ports = 1, .open = pl2303_open, .close = pl2303_close, + .dtr_rts = pl2303_dtr_rts, + .carrier_raised = pl2303_carrier_raised, .write = pl2303_write, .ioctl = pl2303_ioctl, .break_ctl = pl2303_break_ctl, @@ -1137,7 +1122,7 @@ static struct usb_serial_driver pl2303_device = { .write_room = pl2303_write_room, .chars_in_buffer = pl2303_chars_in_buffer, .attach = pl2303_startup, - .shutdown = pl2303_shutdown, + .release = pl2303_release, }; static int __init pl2303_init(void) |