diff options
Diffstat (limited to 'drivers/usb/wusbcore/wa-hc.h')
-rw-r--r-- | drivers/usb/wusbcore/wa-hc.h | 467 |
1 files changed, 0 insertions, 467 deletions
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h deleted file mode 100644 index ec90fff21deb..000000000000 --- a/drivers/usb/wusbcore/wa-hc.h +++ /dev/null @@ -1,467 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * HWA Host Controller Driver - * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8]) - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver implements a USB Host Controller (struct usb_hcd) for a - * Wireless USB Host Controller based on the Wireless USB 1.0 - * Host-Wire-Adapter specification (in layman terms, a USB-dongle that - * implements a Wireless USB host). - * - * Check out the Design-overview.txt file in the source documentation - * for other details on the implementation. - * - * Main blocks: - * - * driver glue with the driver API, workqueue daemon - * - * lc RC instance life cycle management (create, destroy...) - * - * hcd glue with the USB API Host Controller Interface API. - * - * nep Notification EndPoint management: collect notifications - * and queue them with the workqueue daemon. - * - * Handle notifications as coming from the NEP. Sends them - * off others to their respective modules (eg: connect, - * disconnect and reset go to devconnect). - * - * rpipe Remote Pipe management; rpipe is what we use to write - * to an endpoint on a WUSB device that is connected to a - * HWA RC. - * - * xfer Transfer management -- this is all the code that gets a - * buffer and pushes it to a device (or viceversa). * - * - * Some day a lot of this code will be shared between this driver and - * the drivers for DWA (xfer, rpipe). - * - * All starts at driver.c:hwahc_probe(), when one of this guys is - * connected. hwahc_disconnect() stops it. - * - * During operation, the main driver is devices connecting or - * disconnecting. They cause the HWA RC to send notifications into - * nep.c:hwahc_nep_cb() that will dispatch them to - * notif.c:wa_notif_dispatch(). From there they will fan to cause - * device connects, disconnects, etc. - * - * Note much of the activity is difficult to follow. For example a - * device connect goes to devconnect, which will cause the "fake" root - * hub port to show a connect and stop there. Then hub_wq will notice - * and call into the rh.c:hwahc_rc_port_reset() code to authenticate - * the device (and this might require user intervention) and enable - * the port. - * - * We also have a timer workqueue going from devconnect.c that - * schedules in hwahc_devconnect_create(). - * - * The rest of the traffic is in the usual entry points of a USB HCD, - * which are hooked up in driver.c:hwahc_rc_driver, and defined in - * hcd.c. - */ - -#ifndef __HWAHC_INTERNAL_H__ -#define __HWAHC_INTERNAL_H__ - -#include <linux/completion.h> -#include <linux/usb.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/uwb.h> -#include <linux/usb/wusb.h> -#include <linux/usb/wusb-wa.h> - -struct wusbhc; -struct wahc; -extern void wa_urb_enqueue_run(struct work_struct *ws); -extern void wa_process_errored_transfers_run(struct work_struct *ws); - -/** - * RPipe instance - * - * @descr's fields are kept in LE, as we need to send it back and - * forth. - * - * @wa is referenced when set - * - * @segs_available is the number of requests segments that still can - * be submitted to the controller without overloading - * it. It is initialized to descr->wRequests when - * aiming. - * - * A rpipe supports a max of descr->wRequests at the same time; before - * submitting seg_lock has to be taken. If segs_avail > 0, then we can - * submit; if not, we have to queue them. - */ -struct wa_rpipe { - struct kref refcnt; - struct usb_rpipe_descriptor descr; - struct usb_host_endpoint *ep; - struct wahc *wa; - spinlock_t seg_lock; - struct list_head seg_list; - struct list_head list_node; - atomic_t segs_available; - u8 buffer[1]; /* For reads/writes on USB */ -}; - - -enum wa_dti_state { - WA_DTI_TRANSFER_RESULT_PENDING, - WA_DTI_ISOC_PACKET_STATUS_PENDING, - WA_DTI_BUF_IN_DATA_PENDING -}; - -enum wa_quirks { - /* - * The Alereon HWA expects the data frames in isochronous transfer - * requests to be concatenated and not sent as separate packets. - */ - WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC = 0x01, - /* - * The Alereon HWA can be instructed to not send transfer notifications - * as an optimization. - */ - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS = 0x02, -}; - -enum wa_vendor_specific_requests { - WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS = 0x4C, - WA_REQ_ALEREON_FEATURE_SET = 0x01, - WA_REQ_ALEREON_FEATURE_CLEAR = 0x00, -}; - -#define WA_MAX_BUF_IN_URBS 4 -/** - * Instance of a HWA Host Controller - * - * Except where a more specific lock/mutex applies or atomic, all - * fields protected by @mutex. - * - * @wa_descr Can be accessed without locking because it is in - * the same area where the device descriptors were - * read, so it is guaranteed to exist unmodified while - * the device exists. - * - * Endianess has been converted to CPU's. - * - * @nep_* can be accessed without locking as its processing is - * serialized; we submit a NEP URB and it comes to - * hwahc_nep_cb(), which won't issue another URB until it is - * done processing it. - * - * @xfer_list: - * - * List of active transfers to verify existence from a xfer id - * gotten from the xfer result message. Can't use urb->list because - * it goes by endpoint, and we don't know the endpoint at the time - * when we get the xfer result message. We can't really rely on the - * pointer (will have to change for 64 bits) as the xfer id is 32 bits. - * - * @xfer_delayed_list: List of transfers that need to be started - * (with a workqueue, because they were - * submitted from an atomic context). - * - * FIXME: this needs to be layered up: a wusbhc layer (for sharing - * commonalities with WHCI), a wa layer (for sharing - * commonalities with DWA-RC). - */ -struct wahc { - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - - /* HC to deliver notifications */ - union { - struct wusbhc *wusb; - struct dwahc *dwa; - }; - - const struct usb_endpoint_descriptor *dto_epd, *dti_epd; - const struct usb_wa_descriptor *wa_descr; - - struct urb *nep_urb; /* Notification EndPoint [lockless] */ - struct edc nep_edc; - void *nep_buffer; - size_t nep_buffer_size; - - atomic_t notifs_queued; - - u16 rpipes; - unsigned long *rpipe_bm; /* rpipe usage bitmap */ - struct list_head rpipe_delayed_list; /* delayed RPIPES. */ - spinlock_t rpipe_lock; /* protect rpipe_bm and delayed list */ - struct mutex rpipe_mutex; /* assigning resources to endpoints */ - - /* - * dti_state is used to track the state of the dti_urb. When dti_state - * is WA_DTI_ISOC_PACKET_STATUS_PENDING, dti_isoc_xfer_in_progress and - * dti_isoc_xfer_seg identify which xfer the incoming isoc packet - * status refers to. - */ - enum wa_dti_state dti_state; - u32 dti_isoc_xfer_in_progress; - u8 dti_isoc_xfer_seg; - struct urb *dti_urb; /* URB for reading xfer results */ - /* URBs for reading data in */ - struct urb buf_in_urbs[WA_MAX_BUF_IN_URBS]; - int active_buf_in_urbs; /* number of buf_in_urbs active. */ - struct edc dti_edc; /* DTI error density counter */ - void *dti_buf; - size_t dti_buf_size; - - unsigned long dto_in_use; /* protect dto endoint serialization */ - - s32 status; /* For reading status */ - - struct list_head xfer_list; - struct list_head xfer_delayed_list; - struct list_head xfer_errored_list; - /* - * lock for the above xfer lists. Can be taken while a xfer->lock is - * held but not in the reverse order. - */ - spinlock_t xfer_list_lock; - struct work_struct xfer_enqueue_work; - struct work_struct xfer_error_work; - atomic_t xfer_id_count; - - kernel_ulong_t quirks; -}; - - -extern int wa_create(struct wahc *wa, struct usb_interface *iface, - kernel_ulong_t); -extern void __wa_destroy(struct wahc *wa); -extern int wa_dti_start(struct wahc *wa); -void wa_reset_all(struct wahc *wa); - - -/* Miscellaneous constants */ -enum { - /** Max number of EPROTO errors we tolerate on the NEP in a - * period of time */ - HWAHC_EPROTO_MAX = 16, - /** Period of time for EPROTO errors (in jiffies) */ - HWAHC_EPROTO_PERIOD = 4 * HZ, -}; - - -/* Notification endpoint handling */ -extern int wa_nep_create(struct wahc *, struct usb_interface *); -extern void wa_nep_destroy(struct wahc *); - -static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask) -{ - struct urb *urb = wa->nep_urb; - urb->transfer_buffer = wa->nep_buffer; - urb->transfer_buffer_length = wa->nep_buffer_size; - return usb_submit_urb(urb, gfp_mask); -} - -static inline void wa_nep_disarm(struct wahc *wa) -{ - usb_kill_urb(wa->nep_urb); -} - - -/* RPipes */ -static inline void wa_rpipe_init(struct wahc *wa) -{ - INIT_LIST_HEAD(&wa->rpipe_delayed_list); - spin_lock_init(&wa->rpipe_lock); - mutex_init(&wa->rpipe_mutex); -} - -static inline void wa_init(struct wahc *wa) -{ - int index; - - edc_init(&wa->nep_edc); - atomic_set(&wa->notifs_queued, 0); - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; - wa_rpipe_init(wa); - edc_init(&wa->dti_edc); - INIT_LIST_HEAD(&wa->xfer_list); - INIT_LIST_HEAD(&wa->xfer_delayed_list); - INIT_LIST_HEAD(&wa->xfer_errored_list); - spin_lock_init(&wa->xfer_list_lock); - INIT_WORK(&wa->xfer_enqueue_work, wa_urb_enqueue_run); - INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run); - wa->dto_in_use = 0; - atomic_set(&wa->xfer_id_count, 1); - /* init the buf in URBs */ - for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) - usb_init_urb(&(wa->buf_in_urbs[index])); - wa->active_buf_in_urbs = 0; -} - -/** - * Destroy a pipe (when refcount drops to zero) - * - * Assumes it has been moved to the "QUIESCING" state. - */ -struct wa_xfer; -extern void rpipe_destroy(struct kref *_rpipe); -static inline -void __rpipe_get(struct wa_rpipe *rpipe) -{ - kref_get(&rpipe->refcnt); -} -extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *, - struct urb *, gfp_t); -static inline void rpipe_put(struct wa_rpipe *rpipe) -{ - kref_put(&rpipe->refcnt, rpipe_destroy); - -} -extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *); -extern void rpipe_clear_feature_stalled(struct wahc *, - struct usb_host_endpoint *); -extern int wa_rpipes_create(struct wahc *); -extern void wa_rpipes_destroy(struct wahc *); -static inline void rpipe_avail_dec(struct wa_rpipe *rpipe) -{ - atomic_dec(&rpipe->segs_available); -} - -/** - * Returns true if the rpipe is ready to submit more segments. - */ -static inline int rpipe_avail_inc(struct wa_rpipe *rpipe) -{ - return atomic_inc_return(&rpipe->segs_available) > 0 - && !list_empty(&rpipe->seg_list); -} - - -/* Transferring data */ -extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *, - struct urb *, gfp_t); -extern int wa_urb_dequeue(struct wahc *, struct urb *, int); -extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *); - - -/* Misc - * - * FIXME: Refcounting for the actual @hwahc object is not correct; I - * mean, this should be refcounting on the HCD underneath, but - * it is not. In any case, the semantics for HCD refcounting - * are *weird*...on refcount reaching zero it just frees - * it...no RC specific function is called...unless I miss - * something. - * - * FIXME: has to go away in favour of a 'struct' hcd based solution - */ -static inline struct wahc *wa_get(struct wahc *wa) -{ - usb_get_intf(wa->usb_iface); - return wa; -} - -static inline void wa_put(struct wahc *wa) -{ - usb_put_intf(wa->usb_iface); -} - - -static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature) -{ - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - feature, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - - -static inline int __wa_set_feature(struct wahc *wa, u16 feature) -{ - return __wa_feature(wa, 1, feature); -} - - -static inline int __wa_clear_feature(struct wahc *wa, u16 feature) -{ - return __wa_feature(wa, 0, feature); -} - - -/** - * Return the status of a Wire Adapter - * - * @wa: Wire Adapter instance - * @returns < 0 errno code on error, or status bitmap as described - * in WUSB1.0[8.3.1.6]. - * - * NOTE: need malloc, some arches don't take USB from the stack - */ -static inline -s32 __wa_get_status(struct wahc *wa) -{ - s32 result; - result = usb_control_msg( - wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), - USB_REQ_GET_STATUS, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - &wa->status, sizeof(wa->status), USB_CTRL_GET_TIMEOUT); - if (result >= 0) - result = wa->status; - return result; -} - - -/** - * Waits until the Wire Adapter's status matches @mask/@value - * - * @wa: Wire Adapter instance. - * @returns < 0 errno code on error, otherwise status. - * - * Loop until the WAs status matches the mask and value (status & mask - * == value). Timeout if it doesn't happen. - * - * FIXME: is there an official specification on how long status - * changes can take? - */ -static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value) -{ - s32 result; - unsigned loops = 10; - do { - msleep(50); - result = __wa_get_status(wa); - if ((result & mask) == value) - break; - if (loops-- == 0) { - result = -ETIMEDOUT; - break; - } - } while (result >= 0); - return result; -} - - -/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */ -static inline int __wa_stop(struct wahc *wa) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - - result = __wa_clear_feature(wa, WA_ENABLE); - if (result < 0 && result != -ENODEV) { - dev_err(dev, "error commanding HC to stop: %d\n", result); - goto out; - } - result = __wa_wait_status(wa, WA_ENABLE, 0); - if (result < 0 && result != -ENODEV) - dev_err(dev, "error waiting for HC to stop: %d\n", result); -out: - return 0; -} - - -#endif /* #ifndef __HWAHC_INTERNAL_H__ */ |