aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/Kconfig16
-rw-r--r--drivers/usb/class/cdc-wdm.c7
-rw-r--r--drivers/usb/core/driver.c9
-rw-r--r--drivers/usb/core/hcd-pci.c9
-rw-r--r--drivers/usb/core/hcd.c12
-rw-r--r--drivers/usb/core/hub.c19
-rw-r--r--drivers/usb/core/inode.c10
-rw-r--r--drivers/usb/core/message.c17
-rw-r--r--drivers/usb/core/urb.c12
-rw-r--r--drivers/usb/dwc3/core.c6
-rw-r--r--drivers/usb/dwc3/ep0.c12
-rw-r--r--drivers/usb/gadget/at91_udc.c8
-rw-r--r--drivers/usb/gadget/dummy_hcd.c1
-rw-r--r--drivers/usb/gadget/f_fs.c3
-rw-r--r--drivers/usb/gadget/f_mass_storage.c2
-rw-r--r--drivers/usb/gadget/f_phonet.c2
-rw-r--r--drivers/usb/gadget/f_rndis.c1
-rw-r--r--drivers/usb/gadget/file_storage.c2
-rw-r--r--drivers/usb/gadget/fsl_udc_core.c25
-rw-r--r--drivers/usb/gadget/g_ffs.c4
-rw-r--r--drivers/usb/gadget/inode.c1
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c17
-rw-r--r--drivers/usb/gadget/udc-core.c6
-rw-r--r--drivers/usb/gadget/uvc.h2
-rw-r--r--drivers/usb/gadget/uvc_queue.c4
-rw-r--r--drivers/usb/gadget/uvc_v4l2.c2
-rw-r--r--drivers/usb/host/ehci-atmel.c1
-rw-r--r--drivers/usb/host/ehci-dbg.c9
-rw-r--r--drivers/usb/host/ehci-fsl.c7
-rw-r--r--drivers/usb/host/ehci-hcd.c12
-rw-r--r--drivers/usb/host/ehci-hub.c31
-rw-r--r--drivers/usb/host/ehci-omap.c39
-rw-r--r--drivers/usb/host/ehci-pci.c8
-rw-r--r--drivers/usb/host/ehci-tegra.c3
-rw-r--r--drivers/usb/host/ehci.h2
-rw-r--r--drivers/usb/host/ohci-at91.c175
-rw-r--r--drivers/usb/host/pci-quirks.c10
-rw-r--r--drivers/usb/host/uhci-hub.c5
-rw-r--r--drivers/usb/host/xhci-dbg.c2
-rw-r--r--drivers/usb/host/xhci-ext-caps.h5
-rw-r--r--drivers/usb/host/xhci-mem.c9
-rw-r--r--drivers/usb/host/xhci-pci.c4
-rw-r--r--drivers/usb/host/xhci-ring.c6
-rw-r--r--drivers/usb/host/xhci.c12
-rw-r--r--drivers/usb/host/xhci.h4
-rw-r--r--drivers/usb/misc/usbtest.c9
-rw-r--r--drivers/usb/misc/yurex.c10
-rw-r--r--drivers/usb/musb/davinci.c3
-rw-r--r--drivers/usb/musb/musb_core.c40
-rw-r--r--drivers/usb/musb/musb_core.h2
-rw-r--r--drivers/usb/musb/musb_host.c2
-rw-r--r--drivers/usb/musb/omap2430.c31
-rw-r--r--drivers/usb/otg/gpio_vbus.c15
-rw-r--r--drivers/usb/serial/bus.c5
-rw-r--r--drivers/usb/serial/cp210x.c9
-rw-r--r--drivers/usb/serial/ftdi_sio.c36
-rw-r--r--drivers/usb/serial/metro-usb.c6
-rw-r--r--drivers/usb/serial/option.c1
-rw-r--r--drivers/usb/serial/pl2303.c2
-rw-r--r--drivers/usb/serial/sierra.c5
-rw-r--r--drivers/usb/serial/usb-serial.c31
-rw-r--r--drivers/usb/storage/usb.c30
62 files changed, 500 insertions, 290 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index cbd8f5f80596..76316a33061b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -2,14 +2,6 @@
# USB device configuration
#
-menuconfig USB_SUPPORT
- bool "USB support"
- depends on HAS_IOMEM
- default y
- ---help---
- This option adds core support for Universal Serial Bus (USB).
- You will also need drivers from the following menu to make use of it.
-
# many non-PCI SOC chips embed OHCI
config USB_ARCH_HAS_OHCI
boolean
@@ -63,6 +55,14 @@ config USB_ARCH_HAS_XHCI
boolean
default PCI
+menuconfig USB_SUPPORT
+ bool "USB support"
+ depends on HAS_IOMEM
+ default y
+ ---help---
+ This option adds core support for Universal Serial Bus (USB).
+ You will also need drivers from the following menu to make use of it.
+
if USB_SUPPORT
config USB_COMMON
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index c6f6560d436c..0bb2b3248dad 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb)
spin_lock(&desc->iuspin);
desc->werr = urb->status;
spin_unlock(&desc->iuspin);
- clear_bit(WDM_IN_USE, &desc->flags);
kfree(desc->outbuf);
+ desc->outbuf = NULL;
+ clear_bit(WDM_IN_USE, &desc->flags);
wake_up(&desc->wait);
}
@@ -338,7 +339,7 @@ static ssize_t wdm_write
if (we < 0)
return -EIO;
- desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+ buf = kmalloc(count, GFP_KERNEL);
if (!buf) {
rv = -ENOMEM;
goto outnl;
@@ -406,10 +407,12 @@ static ssize_t wdm_write
req->wIndex = desc->inum;
req->wLength = cpu_to_le16(count);
set_bit(WDM_IN_USE, &desc->flags);
+ desc->outbuf = buf;
rv = usb_submit_urb(desc->command, GFP_KERNEL);
if (rv < 0) {
kfree(buf);
+ desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
} else {
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f8e2d6d52e5c..9a56635dc19c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
if (status == 0) {
status = usb_suspend_device(udev, msg);
- /* Again, ignore errors during system sleep transitions */
- if (!PMSG_IS_AUTO(msg))
+ /*
+ * Ignore errors from non-root-hub devices during
+ * system sleep transitions. For the most part,
+ * these devices should go to low power anyway when
+ * the entire bus is suspended.
+ */
+ if (udev->parent && !PMSG_IS_AUTO(msg))
status = 0;
}
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a48e732..57ed9e400c06 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
pci_save_state(pci_dev);
+ /*
+ * Some systems crash if an EHCI controller is in D3 during
+ * a sleep transition. We have to leave such controllers in D0.
+ */
+ if (hcd->broken_pci_sleep) {
+ dev_dbg(dev, "Staying in PCI D0\n");
+ return retval;
+ }
+
/* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 9d7fc9a39933..140d3e11f212 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
if (status == 0) {
usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
hcd->state = HC_STATE_SUSPENDED;
+
+ /* Did we race with a root-hub wakeup event? */
+ if (rhdev->do_remote_wakeup) {
+ char buffer[6];
+
+ status = hcd->driver->hub_status_data(hcd, buffer);
+ if (status != 0) {
+ dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+ hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+ status = -EBUSY;
+ }
+ }
} else {
spin_lock_irq(&hcd_root_hub_lock);
if (!HCD_DEAD(hcd)) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 28664eb7f555..ec6c97dadbe4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1667,7 +1667,6 @@ void usb_disconnect(struct usb_device **pdev)
{
struct usb_device *udev = *pdev;
int i;
- struct usb_hcd *hcd = bus_to_hcd(udev->bus);
/* mark the device as inactive, so any further urb submissions for
* this device (and any of its children) will fail immediately.
@@ -1690,9 +1689,7 @@ void usb_disconnect(struct usb_device **pdev)
* so that the hardware is now fully quiesced.
*/
dev_dbg (&udev->dev, "unregistering device\n");
- mutex_lock(hcd->bandwidth_mutex);
usb_disable_device(udev, 0);
- mutex_unlock(hcd->bandwidth_mutex);
usb_hcd_synchronize_unlinks(udev);
usb_remove_ep_devs(&udev->ep0);
@@ -3163,6 +3160,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (retval)
goto fail;
+ /*
+ * Some superspeed devices have finished the link training process
+ * and attached to a superspeed hub port, but the device descriptor
+ * got from those devices show they aren't superspeed devices. Warm
+ * reset the port attached by the devices can fix them.
+ */
+ if ((udev->speed == USB_SPEED_SUPER) &&
+ (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+ dev_err(&udev->dev, "got a wrong device descriptor, "
+ "warm reset device\n");
+ hub_port_reset(hub, port1, udev,
+ HUB_BH_RESET_TIME, true);
+ retval = -EINVAL;
+ goto fail;
+ }
+
if (udev->descriptor.bMaxPacketSize0 == 0xff ||
udev->speed == USB_SPEED_SUPER)
i = 512;
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index cefa0c8b5b6a..d2b9af59cba9 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -428,18 +428,10 @@ static loff_t default_file_lseek (struct file *file, loff_t offset, int orig)
return retval;
}
-static int default_open (struct inode *inode, struct file *file)
-{
- if (inode->i_private)
- file->private_data = inode->i_private;
-
- return 0;
-}
-
static const struct file_operations default_file_operations = {
.read = default_read_file,
.write = default_write_file,
- .open = default_open,
+ .open = simple_open,
.llseek = default_file_lseek,
};
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b3bdfede45e6..ca717da3be95 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb)
retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS &&
retval != -ENODEV &&
- retval != -EBUSY)
+ retval != -EBUSY &&
+ retval != -EIDRM)
dev_err(&io->dev->dev,
"%s, unlink --> %d\n",
__func__, retval);
@@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb)
}
spin_lock(&io->lock);
}
- urb->dev = NULL;
/* on the last completion, signal usb_sg_wait() */
io->bytes += urb->actual_length;
@@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io)
case -ENXIO: /* hc didn't queue this one */
case -EAGAIN:
case -ENOMEM:
- io->urbs[i]->dev = NULL;
retval = 0;
yield();
break;
@@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
/* fail any uncompleted urbs */
default:
- io->urbs[i]->dev = NULL;
io->urbs[i]->status = retval;
dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
__func__, retval);
@@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
if (!io->urbs [i]->dev)
continue;
retval = usb_unlink_urb(io->urbs [i]);
- if (retval != -EINPROGRESS && retval != -EBUSY)
+ if (retval != -EINPROGRESS
+ && retval != -ENODEV
+ && retval != -EBUSY
+ && retval != -EIDRM)
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__func__, retval);
}
@@ -1135,8 +1136,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
* Deallocates hcd/hardware state for the endpoints (nuking all or most
* pending urbs) and usbcore state for the interfaces, so that usbcore
* must usb_set_configuration() before any interfaces could be used.
- *
- * Must be called with hcd->bandwidth_mutex held.
*/
void usb_disable_device(struct usb_device *dev, int skip_ep0)
{
@@ -1189,7 +1188,9 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
usb_disable_endpoint(dev, i + USB_DIR_IN, false);
}
/* Remove endpoints from the host controller internal state */
+ mutex_lock(hcd->bandwidth_mutex);
usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ mutex_unlock(hcd->bandwidth_mutex);
/* Second pass: remove endpoint pointers */
}
for (i = skip_ep0; i < 16; ++i) {
@@ -1749,7 +1750,6 @@ free_interfaces:
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
- mutex_lock(hcd->bandwidth_mutex);
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device(dev, 1); /* Skip ep0 */
@@ -1762,6 +1762,7 @@ free_interfaces:
* host controller will not allow submissions to dropped endpoints. If
* this call fails, the device state is unchanged.
*/
+ mutex_lock(hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7239a73c1b8c..cd9b3a2cd8a7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
* never submitted, or it was unlinked before, or the hardware is already
* finished with it), even if the completion handler has not yet run.
*
+ * The URB must not be deallocated while this routine is running. In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
* Unlinking and Endpoint Queues:
*
* [The behaviors and guarantees described below do not apply to virtual
@@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb);
* with error -EPERM. Thus even if the URB's completion handler always
* tries to resubmit, it will not succeed and the URB will become idle.
*
+ * The URB must not be deallocated while this routine is running. In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
* This routine may not be used in an interrupt context (such as a bottom
* half or a completion handler), or when holding a spinlock, or in other
* situations where the caller can't schedule().
@@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb);
* with error -EPERM. Thus even if the URB's completion handler always
* tries to resubmit, it will not succeed and the URB will become idle.
*
+ * The URB must not be deallocated while this routine is running. In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
* This routine may not be used in an interrupt context (such as a bottom
* half or a completion handler), or when holding a spinlock, or in other
* situations where the caller can't schedule().
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 7bd815a507e8..99b58d84553a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -206,11 +206,11 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
for (i = 0; i < dwc->num_event_buffers; i++) {
evt = dwc->ev_buffs[i];
- if (evt) {
+ if (evt)
dwc3_free_one_event_buffer(dwc, evt);
- dwc->ev_buffs[i] = NULL;
- }
}
+
+ kfree(dwc->ev_buffs);
}
/**
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 25910e251c04..3584a169886f 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -353,6 +353,9 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
dwc->test_mode_nr = wIndex >> 8;
dwc->test_mode = true;
+ break;
+ default:
+ return -EINVAL;
}
break;
@@ -559,15 +562,20 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
length = trb->size & DWC3_TRB_SIZE_MASK;
if (dwc->ep0_bounced) {
+ unsigned transfer_size = ur->length;
+ unsigned maxp = ep0->endpoint.maxpacket;
+
+ transfer_size += (maxp - (transfer_size % maxp));
transferred = min_t(u32, ur->length,
- ep0->endpoint.maxpacket - length);
+ transfer_size - length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
dwc->ep0_bounced = false;
} else {
transferred = ur->length - length;
- ur->actual += transferred;
}
+ ur->actual += transferred;
+
if ((epnum & 1) && ur->actual < ur->length) {
/* for some reason we did not get everything out */
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0c935d7c65bd..9d7bcd910074 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1863,8 +1863,8 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
mod_timer(&udc->vbus_timer,
jiffies + VBUS_POLL_TIMEOUT);
} else {
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
- 0, driver_name, udc)) {
+ if (request_irq(gpio_to_irq(udc->board.vbus_pin),
+ at91_vbus_irq, 0, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
retval = -EBUSY;
@@ -1886,7 +1886,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
return 0;
fail4:
if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
fail3:
if (gpio_is_valid(udc->board.vbus_pin))
gpio_free(udc->board.vbus_pin);
@@ -1924,7 +1924,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
if (gpio_is_valid(udc->board.vbus_pin)) {
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
gpio_free(udc->board.vbus_pin);
}
free_irq(udc->udp_irq, udc);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a6dfd2164166..170cbe89d9f8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
dum->driver = NULL;
- dummy_pullup(&dum->gadget, 0);
return 0;
}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 1cbba70836bc..f52cb1ae45d9 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -712,7 +712,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
if (code == FUNCTIONFS_INTERFACE_REVMAP) {
struct ffs_function *func = ffs->func;
ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
- } else if (gadget->ops->ioctl) {
+ } else if (gadget && gadget->ops->ioctl) {
ret = gadget->ops->ioctl(gadget, code, value);
} else {
ret = -ENOTTY;
@@ -1382,6 +1382,7 @@ static void functionfs_unbind(struct ffs_data *ffs)
ffs->ep0req = NULL;
ffs->gadget = NULL;
ffs_data_put(ffs);
+ clear_bit(FFS_FL_BOUND, &ffs->flags);
}
}
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a371e966425f..cb8c162cae5a 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2189,7 +2189,7 @@ unknown_cmnd:
common->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
reply = check_command(common, common->cmnd_size,
- DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+ DATA_DIR_UNKNOWN, ~0, 0, unknown);
if (reply == 0) {
common->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 85a5cebe96b3..965a6293206a 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -345,7 +345,7 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req)
}
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
- skb->len <= 1, req->actual, req->actual);
+ skb->len <= 1, req->actual, PAGE_SIZE);
page = NULL;
if (req->actual < req->length) { /* Last fragment */
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 7b1cf18df5e3..52343654f5df 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -500,6 +500,7 @@ rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
if (buf) {
memcpy(req->buf, buf, n);
req->complete = rndis_response_complete;
+ req->context = rndis;
rndis_free_response(rndis->config, buf);
value = n;
}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 4fac56927741..a896d73f7a93 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
fsg->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
if ((reply = check_command(fsg, fsg->cmnd_size,
- DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
fsg->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 5f94e79cd6b9..55abfb6bd612 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -730,7 +730,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
: (1 << (ep_index(ep)));
/* check if the pipe is empty */
- if (!(list_empty(&ep->queue))) {
+ if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) {
/* Add td to the end */
struct fsl_req *lastreq;
lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
@@ -918,10 +918,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
return -ENOMEM;
}
- /* Update ep0 state */
- if ((ep_index(ep) == 0))
- udc->ep0_state = DATA_STATE_XMIT;
-
/* irq handler advances the queue */
if (req != NULL)
list_add_tail(&req->queue, &ep->queue);
@@ -1279,7 +1275,8 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
udc->ep0_dir = USB_DIR_OUT;
ep = &udc->eps[0];
- udc->ep0_state = WAIT_FOR_OUT_STATUS;
+ if (udc->ep0_state != DATA_STATE_XMIT)
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
req->ep = ep;
req->req.length = 0;
@@ -1384,6 +1381,9 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
list_add_tail(&req->queue, &ep->queue);
udc->ep0_state = DATA_STATE_XMIT;
+ if (ep0_prime_status(udc, EP_DIR_OUT))
+ ep0stall(udc);
+
return;
stall:
ep0stall(udc);
@@ -1492,6 +1492,14 @@ static void setup_received_irq(struct fsl_udc *udc,
spin_lock(&udc->lock);
udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
? DATA_STATE_XMIT : DATA_STATE_RECV;
+ /*
+ * If the data stage is IN, send status prime immediately.
+ * See 2.0 Spec chapter 8.5.3.3 for detail.
+ */
+ if (udc->ep0_state == DATA_STATE_XMIT)
+ if (ep0_prime_status(udc, EP_DIR_OUT))
+ ep0stall(udc);
+
} else {
/* No data phase, IN status from gadget */
udc->ep0_dir = USB_DIR_IN;
@@ -1520,9 +1528,8 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
switch (udc->ep0_state) {
case DATA_STATE_XMIT:
- /* receive status phase */
- if (ep0_prime_status(udc, EP_DIR_OUT))
- ep0stall(udc);
+ /* already primed at setup_received_irq */
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
break;
case DATA_STATE_RECV:
/* send status phase */
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 331cd6729d3c..a85eaf40b948 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -161,7 +161,7 @@ static struct usb_composite_driver gfs_driver = {
static struct ffs_data *gfs_ffs_data;
static unsigned long gfs_registered;
-static int gfs_init(void)
+static int __init gfs_init(void)
{
ENTER();
@@ -169,7 +169,7 @@ static int gfs_init(void)
}
module_init(gfs_init);
-static void gfs_exit(void)
+static void __exit gfs_exit(void)
{
ENTER();
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 8793f32bab11..e58b16442971 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1574,7 +1574,6 @@ static void destroy_ep_files (struct dev_data *dev)
DBG (dev, "%s %d\n", __func__, dev->state);
/* dev->state must prevent interference */
-restart:
spin_lock_irq (&dev->lock);
while (!list_empty(&dev->epfiles)) {
struct ep_data *ep;
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 69295ba9d99a..105b206cd844 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -340,7 +340,7 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
/* currently we allocate TX FIFOs for all possible endpoints,
* and assume that they are all the same size. */
- for (ep = 0; ep <= 15; ep++) {
+ for (ep = 1; ep <= 15; ep++) {
val = addr;
val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
addr += size;
@@ -741,7 +741,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
/* write size / packets */
writel(epsize, hsotg->regs + epsize_reg);
- if (using_dma(hsotg)) {
+ if (using_dma(hsotg) && !continuing) {
unsigned int dma_reg;
/* write DMA address to control register, buffer already
@@ -1696,10 +1696,12 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
reg |= mpsval;
writel(reg, regs + S3C_DIEPCTL(ep));
- reg = readl(regs + S3C_DOEPCTL(ep));
- reg &= ~S3C_DxEPCTL_MPS_MASK;
- reg |= mpsval;
- writel(reg, regs + S3C_DOEPCTL(ep));
+ if (ep) {
+ reg = readl(regs + S3C_DOEPCTL(ep));
+ reg &= ~S3C_DxEPCTL_MPS_MASK;
+ reg |= mpsval;
+ writel(reg, regs + S3C_DOEPCTL(ep));
+ }
return;
@@ -1919,7 +1921,8 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
ints & S3C_DIEPMSK_TxFIFOEmpty) {
dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
__func__, idx);
- s3c_hsotg_trytx(hsotg, hs_ep);
+ if (!using_dma(hsotg))
+ s3c_hsotg_trytx(hsotg, hs_ep);
}
}
}
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 56da49f31d6c..e5e44f8cde9a 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -263,9 +263,9 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
if (udc_is_newstyle(udc)) {
udc->driver->disconnect(udc->gadget);
+ usb_gadget_disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
usb_gadget_udc_stop(udc->gadget, udc->driver);
- usb_gadget_disconnect(udc->gadget);
} else {
usb_gadget_stop(udc->gadget, udc->driver);
}
@@ -411,9 +411,13 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
if (sysfs_streq(buf, "connect")) {
+ if (udc_is_newstyle(udc))
+ usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
} else if (sysfs_streq(buf, "disconnect")) {
usb_gadget_disconnect(udc->gadget);
+ if (udc_is_newstyle(udc))
+ usb_gadget_udc_stop(udc->gadget, udc->driver);
} else {
dev_err(dev, "unsupported command '%s'\n", buf);
return -EINVAL;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index bc78c606c12b..ca4e03a1c73a 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -28,7 +28,7 @@
struct uvc_request_data
{
- unsigned int length;
+ __s32 length;
__u8 data[60];
};
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index d776adb2da67..0cdf89d32a15 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -543,11 +543,11 @@ done:
return ret;
}
+/* called with queue->irqlock held.. */
static struct uvc_buffer *
uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
{
struct uvc_buffer *nextbuf;
- unsigned long flags;
if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
buf->buf.length != buf->buf.bytesused) {
@@ -556,14 +556,12 @@ uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
return buf;
}
- spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
queue);
else
nextbuf = NULL;
- spin_unlock_irqrestore(&queue->irqlock, flags);
buf->buf.sequence = queue->sequence++;
do_gettimeofday(&buf->buf.timestamp);
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index f6e083b50191..54d7ca559cb2 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
if (data->length < 0)
return usb_ep_set_halt(cdev->gadget->ep0);
- req->length = min(uvc->event_length, data->length);
+ req->length = min_t(unsigned int, uvc->event_length, data->length);
req->zero = data->length < uvc->event_length;
req->dma = DMA_ADDR_INVALID;
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 19f318ababa2..cf14c95a6700 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/of_platform.h>
/* interface and function clocks */
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index fd9109d7eb0e..680e1a31fb87 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -352,7 +352,6 @@ static int debug_async_open(struct inode *, struct file *);
static int debug_periodic_open(struct inode *, struct file *);
static int debug_registers_open(struct inode *, struct file *);
static int debug_async_open(struct inode *, struct file *);
-static int debug_lpm_open(struct inode *, struct file *);
static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos);
static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
@@ -385,7 +384,7 @@ static const struct file_operations debug_registers_fops = {
};
static const struct file_operations debug_lpm_fops = {
.owner = THIS_MODULE,
- .open = debug_lpm_open,
+ .open = simple_open,
.read = debug_lpm_read,
.write = debug_lpm_write,
.release = debug_lpm_close,
@@ -970,12 +969,6 @@ static int debug_registers_open(struct inode *inode, struct file *file)
return file->private_data ? 0 : -ENOMEM;
}
-static int debug_lpm_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
static int debug_lpm_close(struct inode *inode, struct file *file)
{
return 0;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 3e7345172e03..d0a84bd3f3eb 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -218,6 +218,9 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
u32 portsc;
struct usb_hcd *hcd = ehci_to_hcd(ehci);
void __iomem *non_ehci = hcd->regs;
+ struct fsl_usb2_platform_data *pdata;
+
+ pdata = hcd->self.controller->platform_data;
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
@@ -234,7 +237,9 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
/* fall through */
case FSL_USB2_PHY_UTMI:
/* enable UTMI PHY */
- setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
+ if (pdata->have_sysif_regs)
+ setbits32(non_ehci + FSL_SOC_USB_CTRL,
+ CTRL_UTMI_PHY_EN);
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 057cdda7a489..4a3bc5b7a06f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -347,6 +347,8 @@ static int ehci_reset (struct ehci_hcd *ehci)
if (ehci->debug)
dbgp_external_startup();
+ ehci->port_c_suspend = ehci->suspended_ports =
+ ehci->resuming_ports = 0;
return retval;
}
@@ -856,8 +858,13 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
goto dead;
}
+ /*
+ * We don't use STS_FLR, but some controllers don't like it to
+ * remain on, so mask it out along with the other status bits.
+ */
+ masked_status = status & (INTR_MASK | STS_FLR);
+
/* Shared IRQ? */
- masked_status = status & INTR_MASK;
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
spin_unlock(&ehci->lock);
return IRQ_NONE;
@@ -908,7 +915,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
pcd_status = status;
/* resume root hub? */
- if (!(cmd & CMD_RUN))
+ if (ehci->rh_state == EHCI_RH_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
/* get per-port change detect bits */
@@ -939,6 +946,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
* like usb_port_resume() does.
*/
ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+ set_bit(i, &ehci->resuming_ports);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 256fbd42e48c..38fe07623152 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
* remote wakeup, we must fail the suspend.
*/
if (hcd->self.root_hub->do_remote_wakeup) {
- port = HCS_N_PORTS(ehci->hcs_params);
- while (port--) {
- if (ehci->reset_done[port] != 0) {
- spin_unlock_irq(&ehci->lock);
- ehci_dbg(ehci, "suspend failed because "
- "port %d is resuming\n",
- port + 1);
- return -EBUSY;
- }
+ if (ehci->resuming_ports) {
+ spin_unlock_irq(&ehci->lock);
+ ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+ return -EBUSY;
}
}
@@ -554,16 +549,12 @@ static int
ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 temp, status = 0;
+ u32 temp, status;
u32 mask;
int ports, i, retval = 1;
unsigned long flags;
u32 ppcd = 0;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
- if (ehci->rh_state != EHCI_RH_RUNNING)
- return 0;
-
/* init status to no-changes */
buf [0] = 0;
ports = HCS_N_PORTS (ehci->hcs_params);
@@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
retval++;
}
+ /* Inform the core about resumes-in-progress by returning
+ * a non-zero value even if there are no status changes.
+ */
+ status = ehci->resuming_ports;
+
/* Some boards (mostly VIA?) report bogus overcurrent indications,
* causing massive log spam unless we completely ignore them. It
* may be relevant that VIA VT8235 controllers, where PORT_POWER is
@@ -846,6 +842,7 @@ static int ehci_hub_control (
ehci_writel(ehci,
temp & ~(PORT_RWC_BITS | PORT_RESUME),
status_reg);
+ clear_bit(wIndex, &ehci->resuming_ports);
retval = handshake(ehci, status_reg,
PORT_RESUME, 0, 2000 /* 2msec */);
if (retval != 0) {
@@ -864,6 +861,7 @@ static int ehci_hub_control (
ehci->reset_done[wIndex])) {
status |= USB_PORT_STAT_C_RESET << 16;
ehci->reset_done [wIndex] = 0;
+ clear_bit(wIndex, &ehci->resuming_ports);
/* force reset to complete */
ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
@@ -884,8 +882,10 @@ static int ehci_hub_control (
ehci_readl(ehci, status_reg));
}
- if (!(temp & (PORT_RESUME|PORT_RESET)))
+ if (!(temp & (PORT_RESUME|PORT_RESET))) {
ehci->reset_done[wIndex] = 0;
+ clear_bit(wIndex, &ehci->resuming_ports);
+ }
/* transfer dedicated ports to the companion hc */
if ((temp & PORT_CONNECT) &&
@@ -920,6 +920,7 @@ static int ehci_hub_control (
status |= USB_PORT_STAT_SUSPEND;
} else if (test_bit(wIndex, &ehci->suspended_ports)) {
clear_bit(wIndex, &ehci->suspended_ports);
+ clear_bit(wIndex, &ehci->resuming_ports);
ehci->reset_done[wIndex] = 0;
if (temp & PORT_PE)
set_bit(wIndex, &ehci->port_c_suspend);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index bba9850f32f0..5c78f9e71466 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -42,6 +42,7 @@
#include <plat/usb.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/gpio.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -191,6 +192,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_request_one(pdata->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_request_one(pdata->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -237,6 +251,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
+ if (pdata->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_set_value(pdata->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_set_value(pdata->reset_gpio_port[1], 1);
+ }
+
return 0;
err_add_hcd:
@@ -259,8 +286,9 @@ err_io:
*/
static int ehci_hcd_omap_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_hcd_omap_platform_data *pdata = dev->platform_data;
usb_remove_hcd(hcd);
disable_put_regulator(dev->platform_data);
@@ -269,6 +297,13 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_free(pdata->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_free(pdata->reset_gpio_port[1]);
+ }
return 0;
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb7241d6ef..fe8dc069164e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
hcd->has_tt = 1;
tdi_reset(ehci);
}
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+ /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+ if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+ ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+ hcd->broken_pci_sleep = 1;
+ device_set_wakeup_capable(&pdev->dev, false);
+ }
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 3de48a2d7955..86183366647f 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -224,6 +224,7 @@ static int tegra_ehci_hub_control(
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
/* start resume signalling */
ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+ set_bit(wIndex-1, &ehci->resuming_ports);
spin_unlock_irqrestore(&ehci->lock, flags);
msleep(20);
@@ -236,6 +237,7 @@ static int tegra_ehci_hub_control(
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
ehci->reset_done[wIndex-1] = 0;
+ clear_bit(wIndex-1, &ehci->resuming_ports);
tegra->port_resuming = 1;
goto done;
@@ -729,7 +731,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
err = -ENODEV;
goto fail;
}
- set_irq_flags(irq, IRQF_VALID);
#ifdef CONFIG_USB_OTG_UTILS
if (pdata->operating_mode == TEGRA_USB_OTG) {
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 8f9acbc96fde..2694ed6558d2 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -117,6 +117,8 @@ struct ehci_hcd { /* one per controller */
the change-suspend feature turned on */
unsigned long suspended_ports; /* which ports are
suspended */
+ unsigned long resuming_ports; /* which ports have
+ started to resume */
/* per-HC memory pools (could be per-bus, but ...) */
struct dma_pool *qh_pool; /* qh per active urb */
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index db8963f5fbce..13ebeca8e73e 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -27,6 +27,10 @@
#error "CONFIG_ARCH_AT91 must be defined."
#endif
+#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
+#define at91_for_each_port(index) \
+ for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
/* interface and function clocks; sometimes also an AHB clock */
static struct clk *iclk, *fclk, *hclk;
static int clocked;
@@ -90,7 +94,7 @@ static void at91_stop_hc(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
-static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -104,7 +108,7 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-static int usb_hcd_at91_probe(const struct hc_driver *driver,
+static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval;
@@ -199,7 +203,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
* context, "rmmod" or something similar.
*
*/
-static void usb_hcd_at91_remove(struct usb_hcd *hcd,
+static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
usb_remove_hcd(hcd);
@@ -240,26 +244,26 @@ ohci_at91_start (struct usb_hcd *hcd)
static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
{
- if (port < 0 || port >= 2)
+ if (!valid_port(port))
return;
if (!gpio_is_valid(pdata->vbus_pin[port]))
return;
gpio_set_value(pdata->vbus_pin[port],
- !pdata->vbus_pin_active_low[port] ^ enable);
+ pdata->vbus_pin_active_low[port] ^ enable);
}
static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
{
- if (port < 0 || port >= 2)
+ if (!valid_port(port))
return -EINVAL;
if (!gpio_is_valid(pdata->vbus_pin[port]))
return -EINVAL;
return gpio_get_value(pdata->vbus_pin[port]) ^
- !pdata->vbus_pin_active_low[port];
+ pdata->vbus_pin_active_low[port];
}
/*
@@ -271,9 +275,9 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
int length = ohci_hub_status_data(hcd, buf);
int port;
- for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ at91_for_each_port(port) {
if (pdata->overcurrent_changed[port]) {
- if (! length)
+ if (!length)
length = 1;
buf[0] |= 1 << (port + 1);
}
@@ -297,11 +301,17 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
hcd, typeReq, wValue, wIndex, buf, wLength);
+ wIndex--;
+
switch (typeReq) {
case SetPortFeature:
if (wValue == USB_PORT_FEAT_POWER) {
dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
- ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+ if (valid_port(wIndex)) {
+ ohci_at91_usb_set_power(pdata, wIndex, 1);
+ ret = 0;
+ }
+
goto out;
}
break;
@@ -312,9 +322,9 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
dev_dbg(hcd->self.controller,
"ClearPortFeature: C_OVER_CURRENT\n");
- if (wIndex == 1 || wIndex == 2) {
- pdata->overcurrent_changed[wIndex-1] = 0;
- pdata->overcurrent_status[wIndex-1] = 0;
+ if (valid_port(wIndex)) {
+ pdata->overcurrent_changed[wIndex] = 0;
+ pdata->overcurrent_status[wIndex] = 0;
}
goto out;
@@ -323,9 +333,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
dev_dbg(hcd->self.controller,
"ClearPortFeature: OVER_CURRENT\n");
- if (wIndex == 1 || wIndex == 2) {
- pdata->overcurrent_status[wIndex-1] = 0;
- }
+ if (valid_port(wIndex))
+ pdata->overcurrent_status[wIndex] = 0;
goto out;
@@ -333,15 +342,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
dev_dbg(hcd->self.controller,
"ClearPortFeature: POWER\n");
- if (wIndex == 1 || wIndex == 2) {
- ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+ if (valid_port(wIndex)) {
+ ohci_at91_usb_set_power(pdata, wIndex, 0);
return 0;
}
}
break;
}
- ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+ ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
if (ret)
goto out;
@@ -377,18 +386,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
- if (wIndex == 1 || wIndex == 2) {
- if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+ if (valid_port(wIndex)) {
+ if (!ohci_at91_usb_get_power(pdata, wIndex))
*data &= ~cpu_to_le32(RH_PS_PPS);
- }
- if (pdata->overcurrent_changed[wIndex-1]) {
+ if (pdata->overcurrent_changed[wIndex])
*data |= cpu_to_le32(RH_PS_OCIC);
- }
- if (pdata->overcurrent_status[wIndex-1]) {
+ if (pdata->overcurrent_status[wIndex])
*data |= cpu_to_le32(RH_PS_POCI);
- }
}
}
@@ -450,14 +456,14 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
/* From the GPIO notifying the over-current situation, find
* out the corresponding port */
- for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ at91_for_each_port(port) {
if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
gpio = pdata->overcurrent_pin[port];
break;
}
}
- if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+ if (port == AT91_MAX_USBH_PORTS) {
dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
return IRQ_HANDLED;
}
@@ -467,7 +473,7 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
/* When notified of an over-current situation, disable power
on the corresponding port, and mark this port in
over-current. */
- if (! val) {
+ if (!val) {
ohci_at91_usb_set_power(pdata, port, 0);
pdata->overcurrent_status[port] = 1;
pdata->overcurrent_changed[port] = 1;
@@ -492,7 +498,7 @@ static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
static int __devinit ohci_at91_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- int i, ret, gpio;
+ int i, gpio;
enum of_gpio_flags flags;
struct at91_usbh_data *pdata;
u32 ports;
@@ -514,48 +520,17 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev)
if (!of_property_read_u32(np, "num-ports", &ports))
pdata->ports = ports;
- for (i = 0; i < 2; i++) {
+ at91_for_each_port(i) {
gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags);
pdata->vbus_pin[i] = gpio;
if (!gpio_is_valid(gpio))
continue;
pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
- ret = gpio_request(gpio, "ohci_vbus");
- if (ret) {
- dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio);
- continue;
- }
- ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1);
- if (ret)
- dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d",
- !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio);
}
- for (i = 0; i < 2; i++) {
- gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
- pdata->overcurrent_pin[i] = gpio;
- if (!gpio_is_valid(gpio))
- continue;
- ret = gpio_request(gpio, "ohci_overcurrent");
- if (ret) {
- dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio);
- continue;
- }
-
- ret = gpio_direction_input(gpio);
- if (ret) {
- dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio);
- continue;
- }
-
- ret = request_irq(gpio_to_irq(gpio),
- ohci_hcd_at91_overcurrent_irq,
- IRQF_SHARED, "ohci_overcurrent", pdev);
- if (ret) {
- gpio_free(gpio);
- dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
- }
- }
+ at91_for_each_port(i)
+ pdata->overcurrent_pin[i] =
+ of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
pdev->dev.platform_data = pdata;
@@ -570,39 +545,73 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
-static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata;
int i;
+ int gpio;
+ int ret;
- i = ohci_at91_of_init(pdev);
-
- if (i)
- return i;
+ ret = ohci_at91_of_init(pdev);
+ if (ret)
+ return ret;
pdata = pdev->dev.platform_data;
if (pdata) {
- for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
+ at91_for_each_port(i) {
if (!gpio_is_valid(pdata->vbus_pin[i]))
continue;
- gpio_request(pdata->vbus_pin[i], "ohci_vbus");
+ gpio = pdata->vbus_pin[i];
+
+ ret = gpio_request(gpio, "ohci_vbus");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't request vbus gpio %d\n", gpio);
+ continue;
+ }
+ ret = gpio_direction_output(gpio,
+ !pdata->vbus_pin_active_low[i]);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't put vbus gpio %d as output %d\n",
+ gpio, !pdata->vbus_pin_active_low[i]);
+ gpio_free(gpio);
+ continue;
+ }
+
ohci_at91_usb_set_power(pdata, i, 1);
}
- for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
- int ret;
-
+ at91_for_each_port(i) {
if (!gpio_is_valid(pdata->overcurrent_pin[i]))
continue;
- gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+ gpio = pdata->overcurrent_pin[i];
+
+ ret = gpio_request(gpio, "ohci_overcurrent");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't request overcurrent gpio %d\n",
+ gpio);
+ continue;
+ }
+
+ ret = gpio_direction_input(gpio);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't configure overcurrent gpio %d as input\n",
+ gpio);
+ gpio_free(gpio);
+ continue;
+ }
- ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+ ret = request_irq(gpio_to_irq(gpio),
ohci_hcd_at91_overcurrent_irq,
IRQF_SHARED, "ohci_overcurrent", pdev);
if (ret) {
- gpio_free(pdata->overcurrent_pin[i]);
- dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+ gpio_free(gpio);
+ dev_err(&pdev->dev,
+ "can't get gpio IRQ for overcurrent\n");
}
}
}
@@ -611,20 +620,20 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}
-static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
if (pdata) {
- for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
+ at91_for_each_port(i) {
if (!gpio_is_valid(pdata->vbus_pin[i]))
continue;
ohci_at91_usb_set_power(pdata, i, 0);
gpio_free(pdata->vbus_pin[i]);
}
- for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+ at91_for_each_port(i) {
if (!gpio_is_valid(pdata->overcurrent_pin[i]))
continue;
free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
@@ -687,7 +696,7 @@ MODULE_ALIAS("platform:at91_ohci");
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
- .remove = ohci_hcd_at91_drv_remove,
+ .remove = __devexit_p(ohci_hcd_at91_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 11de5f1be981..32dada8c8b4f 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
}
}
- /* Disable any BIOS SMIs */
- writel(XHCI_LEGACY_DISABLE_SMI,
- base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ /* Mask off (turn off) any enabled SMIs */
+ val &= XHCI_LEGACY_DISABLE_SMI;
+ /* Mask all SMI events bits, RW1C */
+ val |= XHCI_LEGACY_SMI_EVENTS;
+ /* Disable any BIOS SMIs and clear all SMI events*/
+ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
if (usb_is_intel_switchable_xhci(pdev))
usb_enable_xhci_ports(pdev);
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 045cde4cbc3d..768d54295a20 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
status = get_hub_status_data(uhci, buf);
switch (uhci->rh_state) {
- case UHCI_RH_SUSPENDING:
case UHCI_RH_SUSPENDED:
/* if port change, ask to be resumed */
- if (status || uhci->resuming_ports)
+ if (status || uhci->resuming_ports) {
+ status = 1;
usb_hcd_resume_root_hub(hcd);
+ }
break;
case UHCI_RH_AUTO_STOPPED:
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index e9b0f043455d..4b436f5a4171 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci)
xhci_dbg(xhci, " Event Interrupts %s\n",
(temp & CMD_EIE) ? "enabled " : "disabled");
xhci_dbg(xhci, " Host System Error Interrupts %s\n",
- (temp & CMD_EIE) ? "enabled " : "disabled");
+ (temp & CMD_HSEIE) ? "enabled " : "disabled");
xhci_dbg(xhci, " HC has %sfinished light reset\n",
(temp & CMD_LRESET) ? "not " : "");
}
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index c7f33123d4c0..377f4242dabb 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -62,8 +62,9 @@
/* USB Legacy Support Control and Status Register - section 7.1.2 */
/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29)
/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
#define XHCI_L1C (1 << 16)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index cae4c6f2845a..68eaa908ac8e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1796,11 +1796,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
int i;
/* Free the Event Ring Segment Table and the actual Event Ring */
- if (xhci->ir_set) {
- xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
- }
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
dma_free_coherent(&pdev->dev, size,
@@ -1812,7 +1807,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
- xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
@@ -1841,7 +1835,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->medium_streams_pool = NULL;
xhci_dbg(xhci, "Freed medium stream array pool\n");
- xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
if (xhci->dcbaa)
dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
@@ -2459,6 +2452,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
+ xhci_halt(xhci);
+ xhci_reset(xhci);
xhci_mem_cleanup(xhci);
return -ENOMEM;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef98b38626fb..7a856a767e77 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
}
+ if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
}
/* called during probe() after chip reset completes */
@@ -326,7 +328,7 @@ int __init xhci_register_pci(void)
return pci_register_driver(&xhci_pci_driver);
}
-void __exit xhci_unregister_pci(void)
+void xhci_unregister_pci(void)
{
pci_unregister_driver(&xhci_pci_driver);
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bd9d53062eb..3d9422f16a20 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2417,7 +2417,7 @@ hw_died:
u32 irq_pending;
/* Acknowledge the PCI interrupt */
irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- irq_pending |= 0x3;
+ irq_pending |= IMAN_IP;
xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
}
@@ -2734,7 +2734,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
urb->dev->speed == USB_SPEED_FULL)
urb->interval /= 8;
}
- return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+ return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
}
/*
@@ -3514,7 +3514,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
}
ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
- return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+ return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
}
/**** Command Ring Operations ****/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e1963d4a430f..36641a7f2371 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci)
STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
if (!ret)
xhci->xhc_state |= XHCI_STATE_HALTED;
+ else
+ xhci_warn(xhci, "Host not halted after %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
return ret;
}
@@ -664,11 +667,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
- xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
}
static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -677,10 +680,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
- xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
- xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+ xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
}
static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 91074fdab3eb..3d69c4b2b542 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -205,6 +205,10 @@ struct xhci_op_regs {
#define CMD_PM_INDEX (1 << 11)
/* bits 12:31 are reserved (and should be preserved on writes). */
+/* IMAN - Interrupt Management Register */
+#define IMAN_IP (1 << 1)
+#define IMAN_IE (1 << 0)
+
/* USBSTS - USB status - status bitmasks */
/* HC not running - set to 1 when run/stop bit is cleared. */
#define STS_HALT XHCI_STS_HALT
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 959145baf3cf..9dcb68f04f03 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -423,7 +423,7 @@ alloc_sglist(int nents, int max, int vary)
unsigned i;
unsigned size = max;
- sg = kmalloc(nents * sizeof *sg, GFP_KERNEL);
+ sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
sg_init_table(sg, nents);
@@ -904,6 +904,9 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
struct ctrl_ctx context;
int i;
+ if (param->sglen == 0 || param->iterations > UINT_MAX / param->sglen)
+ return -EOPNOTSUPP;
+
spin_lock_init(&context.lock);
context.dev = dev;
init_completion(&context.complete);
@@ -1981,8 +1984,6 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
/* queued control messaging */
case 10:
- if (param->sglen == 0)
- break;
retval = 0;
dev_info(&intf->dev,
"TEST 10: queue %d control calls, %d times\n",
@@ -2276,6 +2277,8 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
if (status < 0) {
WARNING(dev, "couldn't get endpoints, %d\n",
status);
+ kfree(dev->buf);
+ kfree(dev);
return status;
}
/* may find bulk or ISO pipes */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 897edda42270..70201462e19c 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -99,9 +99,7 @@ static void yurex_delete(struct kref *kref)
usb_put_dev(dev->udev);
if (dev->cntl_urb) {
usb_kill_urb(dev->cntl_urb);
- if (dev->cntl_req)
- usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
- dev->cntl_req, dev->cntl_urb->setup_dma);
+ kfree(dev->cntl_req);
if (dev->cntl_buffer)
usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
dev->cntl_buffer, dev->cntl_urb->transfer_dma);
@@ -234,9 +232,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
}
/* allocate buffer for control req */
- dev->cntl_req = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
- GFP_KERNEL,
- &dev->cntl_urb->setup_dma);
+ dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL);
if (!dev->cntl_req) {
err("Could not allocate cntl_req");
goto error;
@@ -286,7 +282,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
usb_rcvintpipe(dev->udev, dev->int_in_endpointAddr),
dev->int_buffer, YUREX_BUF_SIZE, yurex_interrupt,
dev, 1);
- dev->cntl_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ dev->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (usb_submit_urb(dev->urb, GFP_KERNEL)) {
retval = -EIO;
err("Could not submitting URB");
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 97ab975fa442..768b4b55c816 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
usb_nop_xceiv_register();
musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
- return -ENODEV;
+ goto unregister;
musb->mregs += DAVINCI_BASE_OFFSET;
@@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb)
fail:
usb_put_transceiver(musb->xceiv);
+unregister:
usb_nop_xceiv_unregister();
return -ENODEV;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0f8b82918a40..66aaccf04490 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -137,6 +137,9 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
int i = 0;
u8 r;
u8 power;
+ int ret;
+
+ pm_runtime_get_sync(phy->io_dev);
/* Make sure the transceiver is not in low power mode */
power = musb_readb(addr, MUSB_POWER);
@@ -154,15 +157,22 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
& MUSB_ULPI_REG_CMPLT)) {
i++;
- if (i == 10000)
- return -ETIMEDOUT;
+ if (i == 10000) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
}
r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
r &= ~MUSB_ULPI_REG_CMPLT;
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
- return musb_readb(addr, MUSB_ULPI_REG_DATA);
+ ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
+
+out:
+ pm_runtime_put(phy->io_dev);
+
+ return ret;
}
static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
@@ -171,6 +181,9 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
int i = 0;
u8 r = 0;
u8 power;
+ int ret = 0;
+
+ pm_runtime_get_sync(phy->io_dev);
/* Make sure the transceiver is not in low power mode */
power = musb_readb(addr, MUSB_POWER);
@@ -184,15 +197,20 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
& MUSB_ULPI_REG_CMPLT)) {
i++;
- if (i == 10000)
- return -ETIMEDOUT;
+ if (i == 10000) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
}
r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
r &= ~MUSB_ULPI_REG_CMPLT;
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
- return 0;
+out:
+ pm_runtime_put(phy->io_dev);
+
+ return ret;
}
#else
#define musb_ulpi_read NULL
@@ -1904,14 +1922,17 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
if (!musb->isr) {
status = -ENODEV;
- goto fail3;
+ goto fail2;
}
if (!musb->xceiv->io_ops) {
+ musb->xceiv->io_dev = musb->controller;
musb->xceiv->io_priv = musb->mregs;
musb->xceiv->io_ops = &musb_ulpi_access;
}
+ pm_runtime_get_sync(musb->controller);
+
#ifndef CONFIG_MUSB_PIO_ONLY
if (use_dma && dev->dma_mask) {
struct dma_controller *c;
@@ -2023,6 +2044,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
goto fail5;
#endif
+ pm_runtime_put(musb->controller);
+
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
({char *s;
switch (musb->board_mode) {
@@ -2047,6 +2070,9 @@ fail4:
musb_gadget_cleanup(musb);
fail3:
+ pm_runtime_put_sync(musb->controller);
+
+fail2:
if (musb->irq_wake)
device_init_wakeup(dev, 0);
musb_platform_exit(musb);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 93de517a32a0..f4a40f001c88 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -449,7 +449,7 @@ struct musb {
* We added this flag to forcefully disable double
* buffering until we get it working.
*/
- unsigned double_buffer_not_ok:1 __deprecated;
+ unsigned double_buffer_not_ok:1;
struct musb_hdrc_config *config;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 79cb0af779fa..ef8d744800ac 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2098,7 +2098,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
}
/* turn off DMA requests, discard state, stop polling ... */
- if (is_in) {
+ if (ep->epnum && is_in) {
/* giveback saves bulk toggle */
csr = musb_h_flush_rxfifo(ep, 0);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2ae0bb309994..c7785e81254c 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -282,7 +282,8 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
static int omap2430_musb_init(struct musb *musb)
{
- u32 l, status = 0;
+ u32 l;
+ int status = 0;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev->platform_data;
struct omap_musb_board_data *data = plat->board_data;
@@ -301,7 +302,7 @@ static int omap2430_musb_init(struct musb *musb)
status = pm_runtime_get_sync(dev);
if (status < 0) {
- dev_err(dev, "pm_runtime_get_sync FAILED");
+ dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
goto err1;
}
@@ -333,6 +334,7 @@ static int omap2430_musb_init(struct musb *musb)
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+ pm_runtime_put_noidle(musb->controller);
return 0;
err1:
@@ -452,14 +454,14 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
goto err2;
}
+ pm_runtime_enable(&pdev->dev);
+
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
goto err2;
}
- pm_runtime_enable(&pdev->dev);
-
return 0;
err2:
@@ -478,7 +480,6 @@ static int __devexit omap2430_remove(struct platform_device *pdev)
platform_device_del(glue->musb);
platform_device_put(glue->musb);
- pm_runtime_put(&pdev->dev);
kfree(glue);
return 0;
@@ -491,11 +492,13 @@ static int omap2430_runtime_suspend(struct device *dev)
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- musb->context.otg_interfsel = musb_readl(musb->mregs,
- OTG_INTERFSEL);
+ if (musb) {
+ musb->context.otg_interfsel = musb_readl(musb->mregs,
+ OTG_INTERFSEL);
- omap2430_low_level_exit(musb);
- usb_phy_set_suspend(musb->xceiv, 1);
+ omap2430_low_level_exit(musb);
+ usb_phy_set_suspend(musb->xceiv, 1);
+ }
return 0;
}
@@ -505,11 +508,13 @@ static int omap2430_runtime_resume(struct device *dev)
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- omap2430_low_level_init(musb);
- musb_writel(musb->mregs, OTG_INTERFSEL,
- musb->context.otg_interfsel);
+ if (musb) {
+ omap2430_low_level_init(musb);
+ musb_writel(musb->mregs, OTG_INTERFSEL,
+ musb->context.otg_interfsel);
- usb_phy_set_suspend(musb->xceiv, 0);
+ usb_phy_set_suspend(musb->xceiv, 0);
+ }
return 0;
}
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 3ece43a2e4c1..a0a2178974fe 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work)
struct gpio_vbus_data *gpio_vbus =
container_of(work, struct gpio_vbus_data, work);
struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
- int gpio;
+ int gpio, status;
if (!gpio_vbus->phy.otg->gadget)
return;
@@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work)
*/
gpio = pdata->gpio_pullup;
if (is_vbus_powered(pdata)) {
+ status = USB_EVENT_VBUS;
gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+ gpio_vbus->phy.last_event = status;
usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
/* drawing a "unit load" is *always* OK, except for OTG */
@@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work)
/* optionally enable D+ pullup */
if (gpio_is_valid(gpio))
gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
} else {
/* optionally disable D+ pullup */
if (gpio_is_valid(gpio))
@@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work)
set_vbus_draw(gpio_vbus, 0);
usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+ status = USB_EVENT_NONE;
gpio_vbus->phy.state = OTG_STATE_B_IDLE;
+ gpio_vbus->phy.last_event = status;
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
}
}
@@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
irq, err);
goto err_irq;
}
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
+
INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 7f547dc3a590..ed8adb052ca7 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev)
retval = -ENODEV;
goto exit;
}
- if (port->dev_state != PORT_REGISTERING)
- goto exit;
driver = port->serial->type;
if (driver->port_probe) {
@@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev)
if (!port)
return -ENODEV;
- if (port->dev_state != PORT_UNREGISTERING)
- return retval;
-
device_remove_file(&port->dev, &dev_attr_port_number);
driver = port->serial->type;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 0310e2df59f5..ec30f95ef399 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -287,7 +287,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- port_priv->bInterfaceNumber, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_GET_TIMEOUT);
/* Convert data into an array of integers */
for (i = 0; i < length; i++)
@@ -340,12 +341,14 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, 0x0000,
- port_priv->bInterfaceNumber, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_SET_TIMEOUT);
} else {
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, data[0],
- port_priv->bInterfaceNumber, NULL, 0, 300);
+ port_priv->bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
}
kfree(buf);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ff8605b4b4be..02e7f2d32d52 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -75,7 +75,8 @@ struct ftdi_private {
unsigned long last_dtr_rts; /* saved modem control outputs */
struct async_icount icount;
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
- char prev_status, diff_status; /* Used for TIOCMIWAIT */
+ char prev_status; /* Used for TIOCMIWAIT */
+ bool dev_gone; /* Used to abort TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
struct usb_serial_port *port;
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
@@ -1681,6 +1682,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
init_waitqueue_head(&priv->delta_msr_wait);
priv->flags = ASYNC_LOW_LATENCY;
+ priv->dev_gone = false;
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
@@ -1839,6 +1841,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
dbg("%s", __func__);
+ priv->dev_gone = true;
+ wake_up_interruptible_all(&priv->delta_msr_wait);
+
remove_sysfs_attrs(port);
kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -1982,17 +1987,19 @@ static int ftdi_process_packet(struct tty_struct *tty,
N.B. packet may be processed more than once, but differences
are only processed once. */
status = packet[0] & FTDI_STATUS_B0_MASK;
- if (status & FTDI_RS0_CTS)
- priv->icount.cts++;
- if (status & FTDI_RS0_DSR)
- priv->icount.dsr++;
- if (status & FTDI_RS0_RI)
- priv->icount.rng++;
- if (status & FTDI_RS0_RLSD)
- priv->icount.dcd++;
if (status != priv->prev_status) {
- priv->diff_status |= status ^ priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
+ char diff_status = status ^ priv->prev_status;
+
+ if (diff_status & FTDI_RS0_CTS)
+ priv->icount.cts++;
+ if (diff_status & FTDI_RS0_DSR)
+ priv->icount.dsr++;
+ if (diff_status & FTDI_RS0_RI)
+ priv->icount.rng++;
+ if (diff_status & FTDI_RS0_RLSD)
+ priv->icount.dcd++;
+
+ wake_up_interruptible_all(&priv->delta_msr_wait);
priv->prev_status = status;
}
@@ -2395,15 +2402,12 @@ static int ftdi_ioctl(struct tty_struct *tty,
*/
case TIOCMIWAIT:
cprev = priv->icount;
- while (1) {
+ while (!priv->dev_gone) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
cnow = priv->icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
@@ -2412,7 +2416,7 @@ static int ftdi_ioctl(struct tty_struct *tty,
}
cprev = cnow;
}
- /* not reached */
+ return -EIO;
break;
case TIOCSERGETLSR:
return get_lsr_info(port, (struct serial_struct __user *)arg);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6e1622f2a297..08d16e8c002d 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -27,8 +27,8 @@
/* Product information. */
#define FOCUS_VENDOR_ID 0x0C2E
-#define FOCUS_PRODUCT_ID 0x0720
-#define FOCUS_PRODUCT_ID_UNI 0x0710
+#define FOCUS_PRODUCT_ID_BI 0x0720
+#define FOCUS_PRODUCT_ID_UNI 0x0700
#define METROUSB_SET_REQUEST_TYPE 0x40
#define METROUSB_SET_MODEM_CTRL_REQUEST 10
@@ -47,7 +47,7 @@ struct metrousb_private {
/* Device table list. */
static struct usb_device_id id_table[] = {
- { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
+ { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
{ }, /* Terminating entry. */
};
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 836cfa9a515f..f4465ccddc35 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ff4a174fa5de..a1a9062954c4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -420,7 +420,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
control = priv->line_control;
if ((cflag & CBAUD) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- else
+ else if ((old_termios->c_cflag & CBAUD) == B0)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index f14465a83dd1..8c8bf806f6fa 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -221,7 +221,7 @@ static const struct sierra_iface_info typeB_interface_list = {
};
/* 'blacklist' of interfaces not served by this driver */
-static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11, 19, 20 };
static const struct sierra_iface_info direct_ip_interface_blacklist = {
.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
.ifaceinfo = direct_ip_non_serial_ifaces,
@@ -298,6 +298,9 @@ static const struct usb_device_id id_table[] = {
/* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x68A2), /* Sierra Wireless MC77xx in QMI mode */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 69230f01056a..97355a15bbea 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface,
serial->attached = 1;
}
+ /* Avoid race with tty_open and serial_install by setting the
+ * disconnected flag and not clearing it until all ports have been
+ * registered.
+ */
+ serial->disconnected = 1;
+
if (get_free_serial(serial, num_ports, &minor) == NULL) {
dev_err(&interface->dev, "No more free serial devices\n");
goto probe_error;
@@ -1070,19 +1076,16 @@ int usb_serial_probe(struct usb_interface *interface,
port = serial->port[i];
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
- port->dev_state = PORT_REGISTERING;
device_enable_async_suspend(&port->dev);
retval = device_add(&port->dev);
- if (retval) {
+ if (retval)
dev_err(&port->dev, "Error registering port device, "
"continuing\n");
- port->dev_state = PORT_UNREGISTERED;
- } else {
- port->dev_state = PORT_REGISTERED;
- }
}
+ serial->disconnected = 0;
+
usb_serial_console_init(debug, minor);
exit:
@@ -1124,22 +1127,8 @@ void usb_serial_disconnect(struct usb_interface *interface)
}
kill_traffic(port);
cancel_work_sync(&port->work);
- if (port->dev_state == PORT_REGISTERED) {
-
- /* Make sure the port is bound so that the
- * driver's port_remove method is called.
- */
- if (!port->dev.driver) {
- int rc;
-
- port->dev.driver =
- &serial->type->driver;
- rc = device_bind_driver(&port->dev);
- }
- port->dev_state = PORT_UNREGISTERING;
+ if (device_is_registered(&port->dev))
device_del(&port->dev);
- port->dev_state = PORT_UNREGISTERED;
- }
}
}
serial->type->disconnect(serial);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index c18538e4a6db..2653e73db623 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -132,6 +132,35 @@ static struct us_unusual_dev for_dynamic_ids =
#undef COMPLIANT_DEV
#undef USUAL_DEV
+#ifdef CONFIG_LOCKDEP
+
+static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
+
+static void us_set_lock_class(struct mutex *mutex,
+ struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_config *config = udev->actconfig;
+ int i;
+
+ for (i = 0; i < config->desc.bNumInterfaces; i++) {
+ if (config->interface[i] == intf)
+ break;
+ }
+
+ BUG_ON(i == config->desc.bNumInterfaces);
+
+ lockdep_set_class(mutex, &us_interface_key[i]);
+}
+
+#else
+
+static void us_set_lock_class(struct mutex *mutex,
+ struct usb_interface *intf)
+{
+}
+
+#endif
#ifdef CONFIG_PM /* Minimal support for suspend and resume */
@@ -895,6 +924,7 @@ int usb_stor_probe1(struct us_data **pus,
*pus = us = host_to_us(host);
memset(us, 0, sizeof(struct us_data));
mutex_init(&(us->dev_mutex));
+ us_set_lock_class(&us->dev_mutex, intf);
init_completion(&us->cmnd_ready);
init_completion(&(us->notify));
init_waitqueue_head(&us->delay_wait);