aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/chipidea/udc.c20
-rw-r--r--drivers/usb/core/config.c4
-rw-r--r--drivers/usb/core/quirks.c6
-rw-r--r--drivers/usb/dwc2/gadget.c24
-rw-r--r--drivers/usb/dwc2/hcd.c39
-rw-r--r--drivers/usb/dwc2/hcd.h20
-rw-r--r--drivers/usb/dwc2/hcd_intr.c5
-rw-r--r--drivers/usb/dwc2/hcd_queue.c10
-rw-r--r--drivers/usb/dwc2/params.c9
-rw-r--r--drivers/usb/dwc2/platform.c9
-rw-r--r--drivers/usb/gadget/udc/fusb300_udc.c5
-rw-r--r--drivers/usb/gadget/udc/lpc32xx_udc.c7
-rw-r--r--drivers/usb/host/xhci-debugfs.c3
-rw-r--r--drivers/usb/host/xhci-ring.c41
-rw-r--r--drivers/usb/host/xhci.c49
-rw-r--r--drivers/usb/host/xhci.h12
-rw-r--r--drivers/usb/misc/rio500.c80
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c15
-rw-r--r--drivers/usb/mtu3/mtu3_debugfs.c3
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c14
-rw-r--r--drivers/usb/serial/option.c6
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h3
-rw-r--r--drivers/usb/storage/unusual_realtek.h5
-rw-r--r--drivers/usb/typec/bus.c2
-rw-r--r--drivers/usb/typec/ucsi/ucsi_ccg.c6
-rw-r--r--drivers/usb/usbip/stub_dev.c75
27 files changed, 326 insertions, 147 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 829e947cabf5..6a5ee8e6da10 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1622,6 +1622,25 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
static int ci_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
static int ci_udc_stop(struct usb_gadget *gadget);
+
+/* Match ISOC IN from the highest endpoint */
+static struct usb_ep *ci_udc_match_ep(struct usb_gadget *gadget,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+ struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+ struct usb_ep *ep;
+
+ if (usb_endpoint_xfer_isoc(desc) && usb_endpoint_dir_in(desc)) {
+ list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) {
+ if (ep->caps.dir_in && !ep->claimed)
+ return ep;
+ }
+ }
+
+ return NULL;
+}
+
/**
* Device operations part of the API to the USB controller hardware,
* which don't involve endpoints (or i/o)
@@ -1635,6 +1654,7 @@ static const struct usb_gadget_ops usb_gadget_ops = {
.vbus_draw = ci_udc_vbus_draw,
.udc_start = ci_udc_start,
.udc_stop = ci_udc_stop,
+ .match_ep = ci_udc_match_ep,
};
static int init_eps(struct ci_hdrc *ci)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 20ff036b4c22..9d6cb709ca7b 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -932,8 +932,8 @@ int usb_get_bos_descriptor(struct usb_device *dev)
/* Get BOS descriptor */
ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
- if (ret < USB_DT_BOS_SIZE) {
- dev_err(ddev, "unable to get BOS descriptor\n");
+ if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) {
+ dev_err(ddev, "unable to get BOS descriptor or descriptor too short\n");
if (ret >= 0)
ret = -ENOMSG;
kfree(bos);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 8bc35d53408b..6b6413073584 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -209,9 +209,15 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Microsoft Surface Dock Ethernet (RTL8153 GigE) */
+ { USB_DEVICE(0x045e, 0x07c6), .driver_info = USB_QUIRK_NO_LPM },
+
/* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
{ USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech HD Webcam C270 */
+ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 16ffd9fd9361..bff48a8a1984 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -835,19 +835,22 @@ static void dwc2_gadget_fill_nonisoc_xfer_ddma_one(struct dwc2_hsotg_ep *hs_ep,
* with corresponding information based on transfer data.
*/
static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep,
- struct usb_request *ureq,
- unsigned int offset,
+ dma_addr_t dma_buff,
unsigned int len)
{
+ struct usb_request *ureq = NULL;
struct dwc2_dma_desc *desc = hs_ep->desc_list;
struct scatterlist *sg;
int i;
u8 desc_count = 0;
+ if (hs_ep->req)
+ ureq = &hs_ep->req->req;
+
/* non-DMA sg buffer */
- if (!ureq->num_sgs) {
+ if (!ureq || !ureq->num_sgs) {
dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc,
- ureq->dma + offset, len, true);
+ dma_buff, len, true);
return;
}
@@ -1135,7 +1138,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
offset = ureq->actual;
/* Fill DDMA chain entries */
- dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq, offset,
+ dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq->dma + offset,
length);
/* write descriptor chain address to control register */
@@ -2037,12 +2040,13 @@ static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg,
dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n",
index);
if (using_desc_dma(hsotg)) {
+ /* Not specific buffer needed for ep0 ZLP */
+ dma_addr_t dma = hs_ep->desc_list_dma;
+
if (!index)
dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep);
- /* Not specific buffer needed for ep0 ZLP */
- dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &hs_ep->desc_list,
- hs_ep->desc_list_dma, 0, true);
+ dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0);
} else {
dwc2_writel(hsotg, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
DXEPTSIZ_XFERSIZE(0),
@@ -2417,6 +2421,10 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
dwc2_gadget_incr_frame_num(hs_ep);
}
+ /* Set actual frame number for completed transfers */
+ if (!using_desc_dma(hsotg) && hs_ep->isochronous)
+ req->frame_number = hsotg->frame_number;
+
dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
}
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index b50ec3714fd8..2192a2873c7c 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2480,8 +2480,10 @@ static void dwc2_free_dma_aligned_buffer(struct urb *urb)
return;
/* Restore urb->transfer_buffer from the end of the allocated area */
- memcpy(&stored_xfer_buffer, urb->transfer_buffer +
- urb->transfer_buffer_length, sizeof(urb->transfer_buffer));
+ memcpy(&stored_xfer_buffer,
+ PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
+ dma_get_cache_alignment()),
+ sizeof(urb->transfer_buffer));
if (usb_urb_dir_in(urb)) {
if (usb_pipeisoc(urb->pipe))
@@ -2513,6 +2515,7 @@ static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
* DMA
*/
kmalloc_size = urb->transfer_buffer_length +
+ (dma_get_cache_alignment() - 1) +
sizeof(urb->transfer_buffer);
kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
@@ -2523,7 +2526,8 @@ static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
* Position value of original urb->transfer_buffer pointer to the end
* of allocation for later referencing
*/
- memcpy(kmalloc_ptr + urb->transfer_buffer_length,
+ memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
+ dma_get_cache_alignment()),
&urb->transfer_buffer, sizeof(urb->transfer_buffer));
if (usb_urb_dir_out(urb))
@@ -2608,7 +2612,7 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
chan->speed = qh->dev_speed;
- chan->max_packet = dwc2_max_packet(qh->maxp);
+ chan->max_packet = qh->maxp;
chan->xfer_started = 0;
chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
@@ -2686,7 +2690,7 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
* This value may be modified when the transfer is started
* to reflect the actual transfer length
*/
- chan->multi_count = dwc2_hb_mult(qh->maxp);
+ chan->multi_count = qh->maxp_mult;
if (hsotg->params.dma_desc_enable) {
chan->desc_list_addr = qh->desc_list_dma;
@@ -3806,19 +3810,21 @@ static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
struct dwc2_hcd_urb *urb, u8 dev_addr,
- u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps)
+ u8 ep_num, u8 ep_type, u8 ep_dir,
+ u16 maxp, u16 maxp_mult)
{
if (dbg_perio() ||
ep_type == USB_ENDPOINT_XFER_BULK ||
ep_type == USB_ENDPOINT_XFER_CONTROL)
dev_vdbg(hsotg->dev,
- "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n",
- dev_addr, ep_num, ep_dir, ep_type, mps);
+ "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
+ dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
urb->pipe_info.dev_addr = dev_addr;
urb->pipe_info.ep_num = ep_num;
urb->pipe_info.pipe_type = ep_type;
urb->pipe_info.pipe_dir = ep_dir;
- urb->pipe_info.mps = mps;
+ urb->pipe_info.maxp = maxp;
+ urb->pipe_info.maxp_mult = maxp_mult;
}
/*
@@ -3909,8 +3915,9 @@ void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
"IN" : "OUT");
dev_dbg(hsotg->dev,
- " Max packet size: %d\n",
- dwc2_hcd_get_mps(&urb->pipe_info));
+ " Max packet size: %d (%d mult)\n",
+ dwc2_hcd_get_maxp(&urb->pipe_info),
+ dwc2_hcd_get_maxp_mult(&urb->pipe_info));
dev_dbg(hsotg->dev,
" transfer_buffer: %p\n",
urb->buf);
@@ -4510,8 +4517,10 @@ static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
}
dev_vdbg(hsotg->dev, " Speed: %s\n", speed);
- dev_vdbg(hsotg->dev, " Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
+ dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n",
+ usb_endpoint_maxp(&urb->ep->desc),
+ usb_endpoint_maxp_mult(&urb->ep->desc));
+
dev_vdbg(hsotg->dev, " Data buffer length: %d\n",
urb->transfer_buffer_length);
dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n",
@@ -4594,8 +4603,8 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
usb_pipeendpoint(urb->pipe), ep_type,
usb_pipein(urb->pipe),
- usb_maxpacket(urb->dev, urb->pipe,
- !(usb_pipein(urb->pipe))));
+ usb_endpoint_maxp(&ep->desc),
+ usb_endpoint_maxp_mult(&ep->desc));
buf = urb->transfer_buffer;
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index c089ffa1f0a8..ce6445a06588 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -171,7 +171,8 @@ struct dwc2_hcd_pipe_info {
u8 ep_num;
u8 pipe_type;
u8 pipe_dir;
- u16 mps;
+ u16 maxp;
+ u16 maxp_mult;
};
struct dwc2_hcd_iso_packet_desc {
@@ -264,6 +265,7 @@ struct dwc2_hs_transfer_time {
* - USB_ENDPOINT_XFER_ISOC
* @ep_is_in: Endpoint direction
* @maxp: Value from wMaxPacketSize field of Endpoint Descriptor
+ * @maxp_mult: Multiplier for maxp
* @dev_speed: Device speed. One of the following values:
* - USB_SPEED_LOW
* - USB_SPEED_FULL
@@ -340,6 +342,7 @@ struct dwc2_qh {
u8 ep_type;
u8 ep_is_in;
u16 maxp;
+ u16 maxp_mult;
u8 dev_speed;
u8 data_toggle;
u8 ping_state;
@@ -503,9 +506,14 @@ static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
return pipe->pipe_type;
}
-static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe)
+static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->maxp;
+}
+
+static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe)
{
- return pipe->mps;
+ return pipe->maxp_mult;
}
static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
@@ -620,12 +628,6 @@ static inline bool dbg_urb(struct urb *urb)
static inline bool dbg_perio(void) { return false; }
#endif
-/* High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-#define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03))
-
-/* Packet size for any kind of endpoint descriptor */
-#define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
-
/*
* Returns true if frame1 index is greater than frame2 index. The comparison
* is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 88b5dcf3aefc..a052d39b4375 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -1617,8 +1617,9 @@ static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg,
dev_err(hsotg->dev, " Speed: %s\n", speed);
- dev_err(hsotg->dev, " Max packet size: %d\n",
- dwc2_hcd_get_mps(&urb->pipe_info));
+ dev_err(hsotg->dev, " Max packet size: %d (mult %d)\n",
+ dwc2_hcd_get_maxp(&urb->pipe_info),
+ dwc2_hcd_get_maxp_mult(&urb->pipe_info));
dev_err(hsotg->dev, " Data buffer length: %d\n", urb->length);
dev_err(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n",
urb->buf, (unsigned long)urb->dma);
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index ea3aa640c15c..68bbac64b753 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -708,7 +708,7 @@ static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg,
static int dwc2_uframe_schedule_split(struct dwc2_hsotg *hsotg,
struct dwc2_qh *qh)
{
- int bytecount = dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
+ int bytecount = qh->maxp_mult * qh->maxp;
int ls_search_slice;
int err = 0;
int host_interval_in_sched;
@@ -1332,7 +1332,7 @@ static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg,
u32 max_channel_xfer_size;
int status = 0;
- max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp);
+ max_xfer_size = qh->maxp * qh->maxp_mult;
max_channel_xfer_size = hsotg->params.max_transfer_size;
if (max_xfer_size > max_channel_xfer_size) {
@@ -1517,8 +1517,9 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
u32 prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
bool do_split = (prtspd == HPRT0_SPD_HIGH_SPEED &&
dev_speed != USB_SPEED_HIGH);
- int maxp = dwc2_hcd_get_mps(&urb->pipe_info);
- int bytecount = dwc2_hb_mult(maxp) * dwc2_max_packet(maxp);
+ int maxp = dwc2_hcd_get_maxp(&urb->pipe_info);
+ int maxp_mult = dwc2_hcd_get_maxp_mult(&urb->pipe_info);
+ int bytecount = maxp_mult * maxp;
char *speed, *type;
/* Initialize QH */
@@ -1531,6 +1532,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
qh->data_toggle = DWC2_HC_PID_DATA0;
qh->maxp = maxp;
+ qh->maxp_mult = maxp_mult;
INIT_LIST_HEAD(&qh->qtd_list);
INIT_LIST_HEAD(&qh->qh_list_entry);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 6900eea57526..5949262ff669 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -253,6 +253,15 @@ static void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg)
val = (hsotg->hw_params.utmi_phy_data_width ==
GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16;
+ if (hsotg->phy) {
+ /*
+ * If using the generic PHY framework, check if the PHY bus
+ * width is 8-bit and set the phyif appropriately.
+ */
+ if (phy_get_bus_width(hsotg->phy) == 8)
+ val = 8;
+ }
+
hsotg->params.phy_utmi_width = val;
}
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index d10a7f8daec3..e98d7812da2d 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -271,15 +271,6 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
hsotg->plat = dev_get_platdata(hsotg->dev);
- if (hsotg->phy) {
- /*
- * If using the generic PHY framework, check if the PHY bus
- * width is 8-bit and set the phyif appropriately.
- */
- if (phy_get_bus_width(hsotg->phy) == 8)
- hsotg->params.phy_utmi_width = 8;
- }
-
/* Clock */
hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
if (IS_ERR(hsotg->clk)) {
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index 263804d154a7..00e3f66836a9 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1342,12 +1342,15 @@ static const struct usb_gadget_ops fusb300_gadget_ops = {
static int fusb300_remove(struct platform_device *pdev)
{
struct fusb300 *fusb300 = platform_get_drvdata(pdev);
+ int i;
usb_del_gadget_udc(&fusb300->gadget);
iounmap(fusb300->reg);
free_irq(platform_get_irq(pdev, 0), fusb300);
fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+ for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+ kfree(fusb300->ep[i]);
kfree(fusb300);
return 0;
@@ -1491,6 +1494,8 @@ clean_up:
if (fusb300->ep0_req)
fusb300_free_request(&fusb300->ep[0]->ep,
fusb300->ep0_req);
+ for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+ kfree(fusb300->ep[i]);
kfree(fusb300);
}
if (reg)
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index d8f1c60793ed..5f1b14f3e5a0 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -937,8 +937,7 @@ static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
dma_addr_t dma;
struct lpc32xx_usbd_dd_gad *dd;
- dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
- udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
+ dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma);
if (dd)
dd->this_dma = dma;
@@ -3070,9 +3069,9 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
}
udc->udp_baseaddr = devm_ioremap_resource(dev, res);
- if (!udc->udp_baseaddr) {
+ if (IS_ERR(udc->udp_baseaddr)) {
dev_err(udc->dev, "IO map failure\n");
- return -ENOMEM;
+ return PTR_ERR(udc->udp_baseaddr);
}
/* Get USB device clock */
diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c
index cadc01336bf8..7ba6afc7ef23 100644
--- a/drivers/usb/host/xhci-debugfs.c
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -440,6 +440,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
struct xhci_ep_priv *epriv;
struct xhci_slot_priv *spriv = dev->debugfs_private;
+ if (!spriv)
+ return;
+
if (spriv->eps[ep_index])
return;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fed3385aeac0..121782e22c01 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -656,6 +656,7 @@ static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
struct device *dev = xhci_to_hcd(xhci)->self.controller;
struct xhci_segment *seg = td->bounce_seg;
struct urb *urb = td->urb;
+ size_t len;
if (!ring || !seg || !urb)
return;
@@ -666,11 +667,14 @@ static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
return;
}
- /* for in tranfers we need to copy the data from bounce to sg */
- sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf,
- seg->bounce_len, seg->bounce_offs);
dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
DMA_FROM_DEVICE);
+ /* for in tranfers we need to copy the data from bounce to sg */
+ len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
+ seg->bounce_len, seg->bounce_offs);
+ if (len != seg->bounce_len)
+ xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
+ len, seg->bounce_len);
seg->bounce_len = 0;
seg->bounce_offs = 0;
}
@@ -1608,8 +1612,13 @@ static void handle_port_status(struct xhci_hcd *xhci,
usb_hcd_resume_root_hub(hcd);
}
- if (hcd->speed >= HCD_USB3 && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE)
+ if (hcd->speed >= HCD_USB3 &&
+ (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
+ slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
+ if (slot_id && xhci->devs[slot_id])
+ xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR;
bus_state->port_remote_wakeup &= ~(1 << hcd_portnum);
+ }
if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
xhci_dbg(xhci, "port resume event for port %d\n", port_id);
@@ -1797,6 +1806,14 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
{
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
struct xhci_command *command;
+
+ /*
+ * Avoid resetting endpoint if link is inactive. Can cause host hang.
+ * Device will be reset soon to recover the link so don't do anything
+ */
+ if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR)
+ return;
+
command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
if (!command)
return;
@@ -3127,6 +3144,7 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
unsigned int unalign;
unsigned int max_pkt;
u32 new_buff_len;
+ size_t len;
max_pkt = usb_endpoint_maxp(&urb->ep->desc);
unalign = (enqd_len + *trb_buff_len) % max_pkt;
@@ -3157,8 +3175,12 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
/* create a max max_pkt sized bounce buffer pointed to by last trb */
if (usb_urb_dir_out(urb)) {
- sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs,
+ len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
seg->bounce_buf, new_buff_len, enqd_len);
+ if (len != seg->bounce_len)
+ xhci_warn(xhci,
+ "WARN Wrong bounce buffer write length: %zu != %d\n",
+ len, seg->bounce_len);
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
max_pkt, DMA_TO_DEVICE);
} else {
@@ -3423,11 +3445,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
if (urb->transfer_buffer_length > 0) {
u32 length_field, remainder;
+ u64 addr;
if (xhci_urb_suitable_for_idt(urb)) {
- memcpy(&urb->transfer_dma, urb->transfer_buffer,
+ memcpy(&addr, urb->transfer_buffer,
urb->transfer_buffer_length);
field |= TRB_IDT;
+ } else {
+ addr = (u64) urb->transfer_dma;
}
remainder = xhci_td_remainder(xhci, 0,
@@ -3440,8 +3465,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
queue_trb(xhci, ep_ring, true,
- lower_32_bits(urb->transfer_dma),
- upper_32_bits(urb->transfer_dma),
+ lower_32_bits(addr),
+ upper_32_bits(addr),
length_field,
field | ep_ring->cycle_state);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a9bb796794e3..3f79f35d0b19 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -9,6 +9,7 @@
*/
#include <linux/pci.h>
+#include <linux/iopoll.h>
#include <linux/irq.h>
#include <linux/log2.h>
#include <linux/module.h>
@@ -52,7 +53,6 @@ static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
return false;
}
-/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
* xhci_handshake - spin reading hc until handshake completes or fails
* @ptr: address of hc register to be read
@@ -69,18 +69,16 @@ static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ (result & mask) == done ||
+ result == U32_MAX,
+ 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/*
@@ -1468,6 +1466,10 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
xhci_dbg(xhci, "urb submitted during PCI suspend\n");
return -ESHUTDOWN;
}
+ if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) {
+ xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
+ return -ENODEV;
+ }
if (usb_endpoint_xfer_isoc(&urb->ep->desc))
num_tds = urb->number_of_packets;
@@ -3756,6 +3758,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
}
/* If necessary, update the number of active TTs on this root port */
xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+ virt_dev->flags = 0;
ret = 0;
command_cleanup:
@@ -4320,7 +4323,6 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
pm_addr = ports[port_num]->addr + PORTPMSC;
pm_val = readl(pm_addr);
hlpm_addr = ports[port_num]->addr + PORTHLPMC;
- field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
enable ? "enable" : "disable", port_num + 1);
@@ -4332,6 +4334,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
* default one which works with mixed HIRD and BESL
* systems. See XHCI_DEFAULT_BESL definition in xhci.h
*/
+ field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
if ((field & USB_BESL_SUPPORT) &&
(field & USB_BESL_BASELINE_VALID))
hird = USB_GET_BESL_BASELINE(field);
@@ -5062,16 +5065,26 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
} else {
/*
* Some 3.1 hosts return sbrn 0x30, use xhci supported protocol
- * minor revision instead of sbrn
+ * minor revision instead of sbrn. Minor revision is a two digit
+ * BCD containing minor and sub-minor numbers, only show minor.
*/
- minor_rev = xhci->usb3_rhub.min_rev;
- if (minor_rev) {
+ minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+
+ switch (minor_rev) {
+ case 2:
+ hcd->speed = HCD_USB32;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+ hcd->self.root_hub->rx_lanes = 2;
+ hcd->self.root_hub->tx_lanes = 2;
+ break;
+ case 1:
hcd->speed = HCD_USB31;
hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+ break;
}
- xhci_info(xhci, "Host supports USB 3.%x %s SuperSpeed\n",
+ xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
minor_rev,
- minor_rev ? "Enhanced" : "");
+ minor_rev ? "Enhanced " : "");
xhci->usb3_rhub.hcd = hcd;
/* xHCI private pointer was set in xhci_pci_probe for the second
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index a450a99e90eb..92e764c54154 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1010,6 +1010,15 @@ struct xhci_virt_device {
u8 real_port;
struct xhci_interval_bw_table *bw_table;
struct xhci_tt_bw_info *tt_info;
+ /*
+ * flags for state tracking based on events and issued commands.
+ * Software can not rely on states from output contexts because of
+ * latency between events and xHC updating output context values.
+ * See xhci 1.1 section 4.8.3 for more details
+ */
+ unsigned long flags;
+#define VDEV_PORT_ERROR BIT(0) /* Port error, link inactive */
+
/* The current max exit latency for the enabled USB3 link states. */
u16 current_mel;
/* Used for the debugfs interfaces. */
@@ -2160,7 +2169,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
{
if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
- urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE)
+ urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
+ !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
return true;
return false;
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 7b9adeb3e7aa..27e9c78a791e 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -51,7 +51,6 @@ struct rio_usb_data {
char *obuf, *ibuf; /* transfer buffers */
char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
wait_queue_head_t wait_q; /* for timeouts */
- struct mutex lock; /* general race avoidance */
};
static DEFINE_MUTEX(rio500_mutex);
@@ -63,10 +62,8 @@ static int open_rio(struct inode *inode, struct file *file)
/* against disconnect() */
mutex_lock(&rio500_mutex);
- mutex_lock(&(rio->lock));
if (rio->isopen || !rio->present) {
- mutex_unlock(&(rio->lock));
mutex_unlock(&rio500_mutex);
return -EBUSY;
}
@@ -74,7 +71,6 @@ static int open_rio(struct inode *inode, struct file *file)
init_waitqueue_head(&rio->wait_q);
- mutex_unlock(&(rio->lock));
dev_info(&rio->rio_dev->dev, "Rio opened.\n");
mutex_unlock(&rio500_mutex);
@@ -86,9 +82,20 @@ static int close_rio(struct inode *inode, struct file *file)
{
struct rio_usb_data *rio = &rio_instance;
- rio->isopen = 0;
+ /* against disconnect() */
+ mutex_lock(&rio500_mutex);
- dev_info(&rio->rio_dev->dev, "Rio closed.\n");
+ rio->isopen = 0;
+ if (!rio->present) {
+ /* cleanup has been delayed */
+ kfree(rio->ibuf);
+ kfree(rio->obuf);
+ rio->ibuf = NULL;
+ rio->obuf = NULL;
+ } else {
+ dev_info(&rio->rio_dev->dev, "Rio closed.\n");
+ }
+ mutex_unlock(&rio500_mutex);
return 0;
}
@@ -102,7 +109,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
int retries;
int retval=0;
- mutex_lock(&(rio->lock));
+ mutex_lock(&rio500_mutex);
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
retval = -ENODEV;
@@ -246,7 +253,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
err_out:
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return retval;
}
@@ -266,12 +273,12 @@ write_rio(struct file *file, const char __user *buffer,
int errn = 0;
int intr;
- intr = mutex_lock_interruptible(&(rio->lock));
+ intr = mutex_lock_interruptible(&rio500_mutex);
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -ENODEV;
}
@@ -294,7 +301,7 @@ write_rio(struct file *file, const char __user *buffer,
goto error;
}
if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return bytes_written ? bytes_written : -EINTR;
}
@@ -332,12 +339,12 @@ write_rio(struct file *file, const char __user *buffer,
buffer += copy_size;
} while (count > 0);
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return bytes_written ? bytes_written : -EIO;
error:
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return errn;
}
@@ -354,12 +361,12 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
char *ibuf;
int intr;
- intr = mutex_lock_interruptible(&(rio->lock));
+ intr = mutex_lock_interruptible(&rio500_mutex);
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -ENODEV;
}
@@ -370,11 +377,11 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
while (count > 0) {
if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return read_count ? read_count : -EINTR;
}
if (!rio->rio_dev) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -ENODEV;
}
this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
@@ -392,7 +399,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
count = this_read = partial;
} else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */
if (!maxretry--) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
dev_err(&rio->rio_dev->dev,
"read_rio: maxretry timeout\n");
return -ETIME;
@@ -402,19 +409,19 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
finish_wait(&rio->wait_q, &wait);
continue;
} else if (result != -EREMOTEIO) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
dev_err(&rio->rio_dev->dev,
"Read Whoops - result:%d partial:%u this_read:%u\n",
result, partial, this_read);
return -EIO;
} else {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return (0);
}
if (this_read) {
if (copy_to_user(buffer, ibuf, this_read)) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -EFAULT;
}
count -= this_read;
@@ -422,7 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
buffer += this_read;
}
}
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return read_count;
}
@@ -447,15 +454,23 @@ static int probe_rio(struct usb_interface *intf,
{
struct usb_device *dev = interface_to_usbdev(intf);
struct rio_usb_data *rio = &rio_instance;
- int retval;
+ int retval = 0;
- dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
+ mutex_lock(&rio500_mutex);
+ if (rio->present) {
+ dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
+ retval = -EBUSY;
+ goto bail_out;
+ } else {
+ dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
+ }
retval = usb_register_dev(intf, &usb_rio_class);
if (retval) {
dev_err(&dev->dev,
"Not able to get a minor for this device.\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto bail_out;
}
rio->rio_dev = dev;
@@ -464,7 +479,8 @@ static int probe_rio(struct usb_interface *intf,
dev_err(&dev->dev,
"probe_rio: Not enough memory for the output buffer\n");
usb_deregister_dev(intf, &usb_rio_class);
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto bail_out;
}
dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
@@ -473,16 +489,17 @@ static int probe_rio(struct usb_interface *intf,
"probe_rio: Not enough memory for the input buffer\n");
usb_deregister_dev(intf, &usb_rio_class);
kfree(rio->obuf);
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto bail_out;
}
dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
- mutex_init(&(rio->lock));
-
usb_set_intfdata (intf, rio);
rio->present = 1;
+bail_out:
+ mutex_unlock(&rio500_mutex);
- return 0;
+ return retval;
}
static void disconnect_rio(struct usb_interface *intf)
@@ -494,12 +511,10 @@ static void disconnect_rio(struct usb_interface *intf)
if (rio) {
usb_deregister_dev(intf, &usb_rio_class);
- mutex_lock(&(rio->lock));
if (rio->isopen) {
rio->isopen = 0;
/* better let it finish - the release will do whats needed */
rio->rio_dev = NULL;
- mutex_unlock(&(rio->lock));
mutex_unlock(&rio500_mutex);
return;
}
@@ -509,7 +524,6 @@ static void disconnect_rio(struct usb_interface *intf)
dev_info(&intf->dev, "USB Rio disconnected.\n");
rio->present = 0;
- mutex_unlock(&(rio->lock));
}
mutex_unlock(&rio500_mutex);
}
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 9560fde621ee..ea06f1fed6fa 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3029,6 +3029,13 @@ static int sisusb_probe(struct usb_interface *intf,
mutex_init(&(sisusb->lock));
+ sisusb->sisusb_dev = dev;
+ sisusb->vrambase = SISUSB_PCI_MEMBASE;
+ sisusb->mmiobase = SISUSB_PCI_MMIOBASE;
+ sisusb->mmiosize = SISUSB_PCI_MMIOSIZE;
+ sisusb->ioportbase = SISUSB_PCI_IOPORTBASE;
+ /* Everything else is zero */
+
/* Register device */
retval = usb_register_dev(intf, &usb_sisusb_class);
if (retval) {
@@ -3039,13 +3046,7 @@ static int sisusb_probe(struct usb_interface *intf,
goto error_1;
}
- sisusb->sisusb_dev = dev;
- sisusb->minor = intf->minor;
- sisusb->vrambase = SISUSB_PCI_MEMBASE;
- sisusb->mmiobase = SISUSB_PCI_MMIOBASE;
- sisusb->mmiosize = SISUSB_PCI_MMIOSIZE;
- sisusb->ioportbase = SISUSB_PCI_IOPORTBASE;
- /* Everything else is zero */
+ sisusb->minor = intf->minor;
/* Allocate buffers */
sisusb->ibufsize = SISUSB_IBUF_SIZE;
diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c
index 62c57ddc554e..b7c86ccd50b4 100644
--- a/drivers/usb/mtu3/mtu3_debugfs.c
+++ b/drivers/usb/mtu3/mtu3_debugfs.c
@@ -528,8 +528,7 @@ void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb)
void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb)
{
- ssusb->dbgfs_root =
- debugfs_create_dir(dev_name(ssusb->dev), usb_debug_root);
+ ssusb->dbgfs_root = debugfs_create_dir(dev_name(ssusb->dev), NULL);
}
void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 1b1bb0ad40c3..6fa16ab31e2e 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -63,6 +63,7 @@
#define ANADIG_USB1_CHRG_DETECT_SET 0x1b4
#define ANADIG_USB1_CHRG_DETECT_CLR 0x1b8
+#define ANADIG_USB2_CHRG_DETECT_SET 0x214
#define ANADIG_USB1_CHRG_DETECT_EN_B BIT(20)
#define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B BIT(19)
#define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT BIT(18)
@@ -250,6 +251,19 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+ if (mxs_phy->regmap_anatop) {
+ unsigned int reg = mxs_phy->port_id ?
+ ANADIG_USB1_CHRG_DETECT_SET :
+ ANADIG_USB2_CHRG_DETECT_SET;
+ /*
+ * The external charger detector needs to be disabled,
+ * or the signal at DP will be poor
+ */
+ regmap_write(mxs_phy->regmap_anatop, reg,
+ ANADIG_USB1_CHRG_DETECT_EN_B |
+ ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+ }
+
mxs_phy_tx_init(mxs_phy);
return 0;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 83869065b802..a0aaf0635359 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1171,6 +1171,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x1260),
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x1261),
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x1900), /* Telit LN940 (QMI) */
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
@@ -1772,6 +1776,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
.driver_info = RSVD(5) | RSVD(6) },
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */
+ .driver_info = RSVD(7) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 55122ac84518..d7abde14b3cf 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -106,6 +106,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+ { USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 559941ca884d..b0175f17d1a2 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -155,3 +155,6 @@
#define SMART_VENDOR_ID 0x0b8c
#define SMART_PRODUCT_ID 0x2303
+/* Allied Telesis VT-Kit3 */
+#define AT_VENDOR_ID 0x0caa
+#define AT_VTKIT3_PRODUCT_ID 0x3001
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
index 6b2140f966ef..7e14c2d7cf73 100644
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -17,6 +17,11 @@ UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x9999,
"USB Card Reader",
USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+UNUSUAL_DEV(0x0bda, 0x0153, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999,
"Realtek",
"USB Card Reader",
diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c
index 76299b6ff06d..74cb3c2ecb34 100644
--- a/drivers/usb/typec/bus.c
+++ b/drivers/usb/typec/bus.c
@@ -192,7 +192,7 @@ EXPORT_SYMBOL_GPL(typec_altmode_vdm);
const struct typec_altmode *
typec_altmode_get_partner(struct typec_altmode *adev)
{
- return &to_altmode(adev)->partner->adev;
+ return adev ? &to_altmode(adev)->partner->adev : NULL;
}
EXPORT_SYMBOL_GPL(typec_altmode_get_partner);
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 9d46aa9e4e35..bf63074675fc 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -862,8 +862,10 @@ static int do_flash(struct ucsi_ccg *uc, enum enum_flash_mode mode)
not_signed_fw:
wr_buf = kzalloc(CCG4_ROW_SIZE + 4, GFP_KERNEL);
- if (!wr_buf)
- return -ENOMEM;
+ if (!wr_buf) {
+ err = -ENOMEM;
+ goto release_fw;
+ }
err = ccg_cmd_enter_flashing(uc);
if (err)
diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c
index c0d6ff1baa72..7931e6cecc70 100644
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -301,9 +301,17 @@ static int stub_probe(struct usb_device *udev)
const char *udev_busid = dev_name(&udev->dev);
struct bus_id_priv *busid_priv;
int rc = 0;
+ char save_status;
dev_dbg(&udev->dev, "Enter probe\n");
+ /* Not sure if this is our device. Allocate here to avoid
+ * calling alloc while holding busid_table lock.
+ */
+ sdev = stub_device_alloc(udev);
+ if (!sdev)
+ return -ENOMEM;
+
/* check we should claim or not by busid_table */
busid_priv = get_busid_priv(udev_busid);
if (!busid_priv || (busid_priv->status == STUB_BUSID_REMOV) ||
@@ -318,6 +326,9 @@ static int stub_probe(struct usb_device *udev)
* See driver_probe_device() in driver/base/dd.c
*/
rc = -ENODEV;
+ if (!busid_priv)
+ goto sdev_free;
+
goto call_put_busid_priv;
}
@@ -337,12 +348,6 @@ static int stub_probe(struct usb_device *udev)
goto call_put_busid_priv;
}
- /* ok, this is my device */
- sdev = stub_device_alloc(udev);
- if (!sdev) {
- rc = -ENOMEM;
- goto call_put_busid_priv;
- }
dev_info(&udev->dev,
"usbip-host: register new device (bus %u dev %u)\n",
@@ -352,9 +357,16 @@ static int stub_probe(struct usb_device *udev)
/* set private data to usb_device */
dev_set_drvdata(&udev->dev, sdev);
+
busid_priv->sdev = sdev;
busid_priv->udev = udev;
+ save_status = busid_priv->status;
+ busid_priv->status = STUB_BUSID_ALLOC;
+
+ /* release the busid_lock */
+ put_busid_priv(busid_priv);
+
/*
* Claim this hub port.
* It doesn't matter what value we pass as owner
@@ -372,10 +384,8 @@ static int stub_probe(struct usb_device *udev)
dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid);
goto err_files;
}
- busid_priv->status = STUB_BUSID_ALLOC;
- rc = 0;
- goto call_put_busid_priv;
+ return 0;
err_files:
usb_hub_release_port(udev->parent, udev->portnum,
@@ -384,23 +394,30 @@ err_port:
dev_set_drvdata(&udev->dev, NULL);
usb_put_dev(udev);
+ /* we already have busid_priv, just lock busid_lock */
+ spin_lock(&busid_priv->busid_lock);
busid_priv->sdev = NULL;
- stub_device_free(sdev);
+ busid_priv->status = save_status;
+ spin_unlock(&busid_priv->busid_lock);
+ /* lock is released - go to free */
+ goto sdev_free;
call_put_busid_priv:
+ /* release the busid_lock */
put_busid_priv(busid_priv);
+
+sdev_free:
+ stub_device_free(sdev);
+
return rc;
}
static void shutdown_busid(struct bus_id_priv *busid_priv)
{
- if (busid_priv->sdev && !busid_priv->shutdown_busid) {
- busid_priv->shutdown_busid = 1;
- usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED);
+ usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED);
- /* wait for the stop of the event handler */
- usbip_stop_eh(&busid_priv->sdev->ud);
- }
+ /* wait for the stop of the event handler */
+ usbip_stop_eh(&busid_priv->sdev->ud);
}
/*
@@ -427,11 +444,16 @@ static void stub_disconnect(struct usb_device *udev)
/* get stub_device */
if (!sdev) {
dev_err(&udev->dev, "could not get device");
- goto call_put_busid_priv;
+ /* release busid_lock */
+ put_busid_priv(busid_priv);
+ return;
}
dev_set_drvdata(&udev->dev, NULL);
+ /* release busid_lock before call to remove device files */
+ put_busid_priv(busid_priv);
+
/*
* NOTE: rx/tx threads are invoked for each usb_device.
*/
@@ -442,27 +464,36 @@ static void stub_disconnect(struct usb_device *udev)
(struct usb_dev_state *) udev);
if (rc) {
dev_dbg(&udev->dev, "unable to release port\n");
- goto call_put_busid_priv;
+ return;
}
/* If usb reset is called from event handler */
if (usbip_in_eh(current))
- goto call_put_busid_priv;
+ return;
+
+ /* we already have busid_priv, just lock busid_lock */
+ spin_lock(&busid_priv->busid_lock);
+ if (!busid_priv->shutdown_busid)
+ busid_priv->shutdown_busid = 1;
+ /* release busid_lock */
+ spin_unlock(&busid_priv->busid_lock);
/* shutdown the current connection */
shutdown_busid(busid_priv);
usb_put_dev(sdev->udev);
+ /* we already have busid_priv, just lock busid_lock */
+ spin_lock(&busid_priv->busid_lock);
/* free sdev */
busid_priv->sdev = NULL;
stub_device_free(sdev);
if (busid_priv->status == STUB_BUSID_ALLOC)
busid_priv->status = STUB_BUSID_ADDED;
-
-call_put_busid_priv:
- put_busid_priv(busid_priv);
+ /* release busid_lock */
+ spin_unlock(&busid_priv->busid_lock);
+ return;
}
#ifdef CONFIG_PM
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.