diff options
Diffstat (limited to 'drivers/visorbus/controlvmchannel.h')
| -rw-r--r-- | drivers/visorbus/controlvmchannel.h | 650 |
1 files changed, 0 insertions, 650 deletions
diff --git a/drivers/visorbus/controlvmchannel.h b/drivers/visorbus/controlvmchannel.h deleted file mode 100644 index c87213554427..000000000000 --- a/drivers/visorbus/controlvmchannel.h +++ /dev/null @@ -1,650 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -#ifndef __CONTROLVMCHANNEL_H__ -#define __CONTROLVMCHANNEL_H__ - -#include <linux/uuid.h> -#include <linux/visorbus.h> - -/* {2B3C2D10-7EF5-4ad8-B966-3448B7386B3D} */ -#define VISOR_CONTROLVM_CHANNEL_GUID \ - GUID_INIT(0x2b3c2d10, 0x7ef5, 0x4ad8, \ - 0xb9, 0x66, 0x34, 0x48, 0xb7, 0x38, 0x6b, 0x3d) - -#define CONTROLVM_MESSAGE_MAX 64 - -/* - * Must increment this whenever you insert or delete fields within this channel - * struct. Also increment whenever you change the meaning of fields within this - * channel struct so as to break pre-existing software. Note that you can - * usually add fields to the END of the channel struct withOUT needing to - * increment this. - */ -#define VISOR_CONTROLVM_CHANNEL_VERSIONID 1 - -/* Defines for various channel queues */ -#define CONTROLVM_QUEUE_REQUEST 0 -#define CONTROLVM_QUEUE_RESPONSE 1 -#define CONTROLVM_QUEUE_EVENT 2 -#define CONTROLVM_QUEUE_ACK 3 - -/* Max num of messages stored during IOVM creation to be reused after crash */ -#define CONTROLVM_CRASHMSG_MAX 2 - -/* - * struct visor_segment_state - * @enabled: May enter other states. - * @active: Assigned to active partition. - * @alive: Configure message sent to service/server. - * @revoked: Similar to partition state ShuttingDown. - * @allocated: Memory (device/port number) has been selected by Command. - * @known: Has been introduced to the service/guest partition. - * @ready: Service/Guest partition has responded to introduction. - * @operating: Resource is configured and operating. - * @reserved: Natural alignment. - * - * Note: Don't use high bit unless we need to switch to ushort which is - * non-compliant. - */ -struct visor_segment_state { - u16 enabled:1; - u16 active:1; - u16 alive:1; - u16 revoked:1; - u16 allocated:1; - u16 known:1; - u16 ready:1; - u16 operating:1; - u16 reserved:8; -} __packed; - -static const struct visor_segment_state segment_state_running = { - 1, 1, 1, 0, 1, 1, 1, 1 -}; - -static const struct visor_segment_state segment_state_paused = { - 1, 1, 1, 0, 1, 1, 1, 0 -}; - -static const struct visor_segment_state segment_state_standby = { - 1, 1, 0, 0, 1, 1, 1, 0 -}; - -/* - * enum controlvm_id - * @CONTROLVM_INVALID: - * @CONTROLVM_BUS_CREATE: CP --> SP, GP. - * @CONTROLVM_BUS_DESTROY: CP --> SP, GP. - * @CONTROLVM_BUS_CONFIGURE: CP --> SP. - * @CONTROLVM_BUS_CHANGESTATE: CP --> SP, GP. - * @CONTROLVM_BUS_CHANGESTATE_EVENT: SP, GP --> CP. - * @CONTROLVM_DEVICE_CREATE: CP --> SP, GP. - * @CONTROLVM_DEVICE_DESTROY: CP --> SP, GP. - * @CONTROLVM_DEVICE_CONFIGURE: CP --> SP. - * @CONTROLVM_DEVICE_CHANGESTATE: CP --> SP, GP. - * @CONTROLVM_DEVICE_CHANGESTATE_EVENT: SP, GP --> CP. - * @CONTROLVM_DEVICE_RECONFIGURE: CP --> Boot. - * @CONTROLVM_CHIPSET_INIT: CP --> SP, GP. - * @CONTROLVM_CHIPSET_STOP: CP --> SP, GP. - * @CONTROLVM_CHIPSET_READY: CP --> SP. - * @CONTROLVM_CHIPSET_SELFTEST: CP --> SP. - * - * Ids for commands that may appear in either queue of a ControlVm channel. - * - * Commands that are initiated by the command partition (CP), by an IO or - * console service partition (SP), or by a guest partition (GP) are: - * - issued on the RequestQueue queue (q #0) in the ControlVm channel - * - responded to on the ResponseQueue queue (q #1) in the ControlVm channel - * - * Events that are initiated by an IO or console service partition (SP) or - * by a guest partition (GP) are: - * - issued on the EventQueue queue (q #2) in the ControlVm channel - * - responded to on the EventAckQueue queue (q #3) in the ControlVm channel - */ -enum controlvm_id { - CONTROLVM_INVALID = 0, - /* - * SWITCH commands required Parameter: SwitchNumber. - * BUS commands required Parameter: BusNumber - */ - CONTROLVM_BUS_CREATE = 0x101, - CONTROLVM_BUS_DESTROY = 0x102, - CONTROLVM_BUS_CONFIGURE = 0x104, - CONTROLVM_BUS_CHANGESTATE = 0x105, - CONTROLVM_BUS_CHANGESTATE_EVENT = 0x106, - /* DEVICE commands required Parameter: BusNumber, DeviceNumber */ - CONTROLVM_DEVICE_CREATE = 0x201, - CONTROLVM_DEVICE_DESTROY = 0x202, - CONTROLVM_DEVICE_CONFIGURE = 0x203, - CONTROLVM_DEVICE_CHANGESTATE = 0x204, - CONTROLVM_DEVICE_CHANGESTATE_EVENT = 0x205, - CONTROLVM_DEVICE_RECONFIGURE = 0x206, - /* CHIPSET commands */ - CONTROLVM_CHIPSET_INIT = 0x301, - CONTROLVM_CHIPSET_STOP = 0x302, - CONTROLVM_CHIPSET_READY = 0x304, - CONTROLVM_CHIPSET_SELFTEST = 0x305, -}; - -/* - * struct irq_info - * @reserved1: Natural alignment purposes - * @recv_irq_handle: Specifies interrupt handle. It is used to retrieve the - * corresponding interrupt pin from Monitor; and the interrupt - * pin is used to connect to the corresponding interrupt. - * Used by IOPart-GP only. - * @recv_irq_vector: Specifies interrupt vector. It, interrupt pin, and shared - * are used to connect to the corresponding interrupt. - * Used by IOPart-GP only. - * @recv_irq_shared: Specifies if the recvInterrupt is shared. It, interrupt - * pin and vector are used to connect to 0 = not shared; - * 1 = shared the corresponding interrupt. - * Used by IOPart-GP only. - * @reserved: Natural alignment purposes - */ -struct irq_info { - u64 reserved1; - u64 recv_irq_handle; - u32 recv_irq_vector; - u8 recv_irq_shared; - u8 reserved[3]; -} __packed; - -/* - * struct efi_visor_indication - * @boot_to_fw_ui: Stop in UEFI UI - * @clear_nvram: Clear NVRAM - * @clear_cmos: Clear CMOS - * @boot_to_tool: Run install tool - * @reserved: Natural alignment - */ -struct efi_visor_indication { - u64 boot_to_fw_ui:1; - u64 clear_nvram:1; - u64 clear_cmos:1; - u64 boot_to_tool:1; - /* Remaining bits are available */ - u64 reserved:60; -} __packed; - -enum visor_chipset_feature { - VISOR_CHIPSET_FEATURE_REPLY = 0x00000001, - VISOR_CHIPSET_FEATURE_PARA_HOTPLUG = 0x00000002, -}; - -/* - * struct controlvm_message_header - * @id: See CONTROLVM_ID. - * @message_size: Includes size of this struct + size of message. - * @segment_index: Index of segment containing Vm message/information. - * @completion_status: Error status code or result of message completion. - * @struct flags: - * @failed: =1 in a response to signify failure. - * @response_expected: =1 in all messages that expect a response. - * @server: =1 in all bus & device-related messages where the - * message receiver is to act as the bus or device - * server. - * @test_message: =1 for testing use only (Control and Command - * ignore this). - * @partial_completion: =1 if there are forthcoming responses/acks - * associated with this message. - * @preserve: =1 this is to let us know to preserve channel - * contents. - * @writer_in_diag: =1 the DiagWriter is active in the Diagnostic - * Partition. - * @reserve: Natural alignment. - * @reserved: Natural alignment. - * @message_handle: Identifies the particular message instance. - * @payload_vm_offset: Offset of payload area from start of this instance. - * @payload_max_bytes: Maximum bytes allocated in payload area of ControlVm - * segment. - * @payload_bytes: Actual number of bytes of payload area to copy between - * IO/Command. If non-zero, there is a payload to copy. - * - * This is the common structure that is at the beginning of every - * ControlVm message (both commands and responses) in any ControlVm - * queue. Commands are easily distinguished from responses by - * looking at the flags.response field. - */ -struct controlvm_message_header { - u32 id; - /* - * For requests, indicates the message type. For responses, indicates - * the type of message we are responding to. - */ - u32 message_size; - u32 segment_index; - u32 completion_status; - struct { - u32 failed:1; - u32 response_expected:1; - u32 server:1; - u32 test_message:1; - u32 partial_completion:1; - u32 preserve:1; - u32 writer_in_diag:1; - u32 reserve:25; - } __packed flags; - u32 reserved; - u64 message_handle; - u64 payload_vm_offset; - u32 payload_max_bytes; - u32 payload_bytes; -} __packed; - -/* - * struct controlvm_packet_device_create - For CONTROLVM_DEVICE_CREATE - * @bus_no: Bus # (0..n-1) from the msg receiver's end. - * @dev_no: Bus-relative (0..n-1) device number. - * @channel_addr: Guest physical address of the channel, which can be - * dereferenced by the receiver of this ControlVm command. - * @channel_bytes: Specifies size of the channel in bytes. - * @data_type_uuid: Specifies format of data in channel. - * @dev_inst_uuid: Instance guid for the device. - * @irq_info intr: Specifies interrupt information. - */ -struct controlvm_packet_device_create { - u32 bus_no; - u32 dev_no; - u64 channel_addr; - u64 channel_bytes; - guid_t data_type_guid; - guid_t dev_inst_guid; - struct irq_info intr; -} __packed; - -/* - * struct controlvm_packet_device_configure - For CONTROLVM_DEVICE_CONFIGURE - * @bus_no: Bus number (0..n-1) from the msg receiver's perspective. - * @dev_no: Bus-relative (0..n-1) device number. - */ -struct controlvm_packet_device_configure { - u32 bus_no; - u32 dev_no; -} __packed; - -/* Total 128 bytes */ -struct controlvm_message_device_create { - struct controlvm_message_header header; - struct controlvm_packet_device_create packet; -} __packed; - -/* Total 56 bytes */ -struct controlvm_message_device_configure { - struct controlvm_message_header header; - struct controlvm_packet_device_configure packet; -} __packed; - -/* - * struct controlvm_message_packet - This is the format for a message in any - * ControlVm queue. - * @struct create_bus: For CONTROLVM_BUS_CREATE. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @dev_count: Indicates the max number of devices on this bus. - * @channel_addr: Guest physical address of the channel, which can be - * dereferenced by the receiver of this ControlVM - * command. - * @channel_bytes: Size of the channel. - * @bus_data_type_uuid: Indicates format of data in bus channel. - * @bus_inst_uuid: Instance uuid for the bus. - * - * @struct destroy_bus: For CONTROLVM_BUS_DESTROY. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @reserved: Natural alignment purposes. - * - * @struct configure_bus: For CONTROLVM_BUS_CONFIGURE. - * @bus_no: Bus # (0..n-1) from the receiver's perspective. - * @reserved1: For alignment purposes. - * @guest_handle: This is used to convert guest physical address to - * physical address. - * @recv_bus_irq_handle: Specifies interrupt info. It is used by SP to - * register to receive interrupts from the CP. This - * interrupt is used for bus level notifications. - * The corresponding sendBusInterruptHandle is kept - * in CP. - * - * @struct create_device: For CONTROLVM_DEVICE_CREATE. - * - * @struct destroy_device: For CONTROLVM_DEVICE_DESTROY. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @dev_no: Bus-relative (0..n-1) device number. - * - * @struct configure_device: For CONTROLVM_DEVICE_CONFIGURE. - * - * @struct reconfigure_device: For CONTROLVM_DEVICE_RECONFIGURE. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @dev_no: Bus-relative (0..n-1) device number. - * - * @struct bus_change_state: For CONTROLVM_BUS_CHANGESTATE. - * @bus_no: - * @struct state: - * @reserved: Natural alignment purposes. - * - * @struct device_change_state: For CONTROLVM_DEVICE_CHANGESTATE. - * @bus_no: - * @dev_no: - * @struct state: - * @struct flags: - * @phys_device: =1 if message is for a physical device. - * @reserved: Natural alignment. - * @reserved1: Natural alignment. - * @reserved: Natural alignment purposes. - * - * @struct device_change_state_event: For CONTROLVM_DEVICE_CHANGESTATE_EVENT. - * @bus_no: - * @dev_no: - * @struct state: - * @reserved: Natural alignment purposes. - * - * @struct init_chipset: For CONTROLVM_CHIPSET_INIT. - * @bus_count: Indicates the max number of busses. - * @switch_count: Indicates the max number of switches. - * @enum features: - * @platform_number: - * - * @struct chipset_selftest: For CONTROLVM_CHIPSET_SELFTEST. - * @options: Reserved. - * @test: Bit 0 set to run embedded selftest. - * - * @addr: A physical address of something, that can be dereferenced by the - * receiver of this ControlVm command. - * - * @handle: A handle of something (depends on command id). - */ -struct controlvm_message_packet { - union { - struct { - u32 bus_no; - u32 dev_count; - u64 channel_addr; - u64 channel_bytes; - guid_t bus_data_type_guid; - guid_t bus_inst_guid; - } __packed create_bus; - struct { - u32 bus_no; - u32 reserved; - } __packed destroy_bus; - struct { - u32 bus_no; - u32 reserved1; - u64 guest_handle; - u64 recv_bus_irq_handle; - } __packed configure_bus; - struct controlvm_packet_device_create create_device; - struct { - u32 bus_no; - u32 dev_no; - } __packed destroy_device; - struct controlvm_packet_device_configure configure_device; - struct { - u32 bus_no; - u32 dev_no; - } __packed reconfigure_device; - struct { - u32 bus_no; - struct visor_segment_state state; - u8 reserved[2]; - } __packed bus_change_state; - struct { - u32 bus_no; - u32 dev_no; - struct visor_segment_state state; - struct { - u32 phys_device:1; - u32 reserved:31; - u32 reserved1; - } __packed flags; - u8 reserved[2]; - } __packed device_change_state; - struct { - u32 bus_no; - u32 dev_no; - struct visor_segment_state state; - u8 reserved[6]; - } __packed device_change_state_event; - struct { - u32 bus_count; - u32 switch_count; - enum visor_chipset_feature features; - u32 platform_number; - } __packed init_chipset; - struct { - u32 options; - u32 test; - } __packed chipset_selftest; - u64 addr; - u64 handle; - }; -} __packed; - -/* All messages in any ControlVm queue have this layout. */ -struct controlvm_message { - struct controlvm_message_header hdr; - struct controlvm_message_packet cmd; -} __packed; - -/* - * struct visor_controlvm_channel - * @struct header: - * @gp_controlvm: Guest phys addr of this channel. - * @gp_partition_tables: Guest phys addr of partition tables. - * @gp_diag_guest: Guest phys addr of diagnostic channel. - * @gp_boot_romdisk: Guest phys addr of (read* only) Boot - * ROM disk. - * @gp_boot_ramdisk: Guest phys addr of writable Boot RAM - * disk. - * @gp_acpi_table: Guest phys addr of acpi table. - * @gp_control_channel: Guest phys addr of control channel. - * @gp_diag_romdisk: Guest phys addr of diagnostic ROM disk. - * @gp_nvram: Guest phys addr of NVRAM channel. - * @request_payload_offset: Offset to request payload area. - * @event_payload_offset: Offset to event payload area. - * @request_payload_bytes: Bytes available in request payload area. - * @event_payload_bytes: Bytes available in event payload area. - * @control_channel_bytes: - * @nvram_channel_bytes: Bytes in PartitionNvram segment. - * @message_bytes: sizeof(CONTROLVM_MESSAGE). - * @message_count: CONTROLVM_MESSAGE_MAX. - * @gp_smbios_table: Guest phys addr of SMBIOS tables. - * @gp_physical_smbios_table: Guest phys addr of SMBIOS table. - * @gp_reserved: VISOR_MAX_GUESTS_PER_SERVICE. - * @virtual_guest_firmware_image_base: Guest physical address of EFI firmware - * image base. - * @virtual_guest_firmware_entry_point: Guest physical address of EFI firmware - * entry point. - * @virtual_guest_firmware_image_size: Guest EFI firmware image size. - * @virtual_guest_firmware_boot_base: GPA = 1MB where EFI firmware image is - * copied to. - * @virtual_guest_image_base: - * @virtual_guest_image_size: - * @prototype_control_channel_offset: - * @virtual_guest_partition_handle: - * @restore_action: Restore Action field to restore the - * guest partition. - * @dump_action: For Windows guests it shows if the - * visordisk is in dump mode. - * @nvram_fail_count: - * @saved_crash_message_count: = CONTROLVM_CRASHMSG_MAX. - * @saved_crash_message_offset: Offset to request payload area needed - * for crash dump. - * @installation_error: Type of error encountered during - * installation. - * @installation_text_id: Id of string to display. - * @installation_remaining_steps: Number of remaining installation steps - * (for progress bars). - * @tool_action: VISOR_TOOL_ACTIONS Installation Action - * field. - * @reserved: Alignment. - * @struct efi_visor_ind: - * @sp_reserved: - * @reserved2: Force signals to begin on 128-byte - * cache line. - * @struct request_queue: Guest partition uses this queue to send - * requests to Control. - * @struct response_queue: Control uses this queue to respond to - * service or guest partition request. - * @struct event_queue: Control uses this queue to send events - * to guest partition. - * @struct event_ack_queue: Service or guest partition uses this - * queue to ack Control events. - * @struct request_msg: Request fixed-size message pool - - * does not include payload. - * @struct response_msg: Response fixed-size message pool - - * does not include payload. - * @struct event_msg: Event fixed-size message pool - - * does not include payload. - * @struct event_ack_msg: Ack fixed-size message pool - - * does not include payload. - * @struct saved_crash_msg: Message stored during IOVM creation to - * be reused after crash. - */ -struct visor_controlvm_channel { - struct channel_header header; - u64 gp_controlvm; - u64 gp_partition_tables; - u64 gp_diag_guest; - u64 gp_boot_romdisk; - u64 gp_boot_ramdisk; - u64 gp_acpi_table; - u64 gp_control_channel; - u64 gp_diag_romdisk; - u64 gp_nvram; - u64 request_payload_offset; - u64 event_payload_offset; - u32 request_payload_bytes; - u32 event_payload_bytes; - u32 control_channel_bytes; - u32 nvram_channel_bytes; - u32 message_bytes; - u32 message_count; - u64 gp_smbios_table; - u64 gp_physical_smbios_table; - char gp_reserved[2688]; - u64 virtual_guest_firmware_image_base; - u64 virtual_guest_firmware_entry_point; - u64 virtual_guest_firmware_image_size; - u64 virtual_guest_firmware_boot_base; - u64 virtual_guest_image_base; - u64 virtual_guest_image_size; - u64 prototype_control_channel_offset; - u64 virtual_guest_partition_handle; - u16 restore_action; - u16 dump_action; - u16 nvram_fail_count; - u16 saved_crash_message_count; - u32 saved_crash_message_offset; - u32 installation_error; - u32 installation_text_id; - u16 installation_remaining_steps; - u8 tool_action; - u8 reserved; - struct efi_visor_indication efi_visor_ind; - u32 sp_reserved; - u8 reserved2[28]; - struct signal_queue_header request_queue; - struct signal_queue_header response_queue; - struct signal_queue_header event_queue; - struct signal_queue_header event_ack_queue; - struct controlvm_message request_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message response_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message event_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message event_ack_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message saved_crash_msg[CONTROLVM_CRASHMSG_MAX]; -} __packed; - -/* - * struct visor_controlvm_parameters_header - * - * The following header will be located at the beginning of PayloadVmOffset for - * various ControlVm commands. The receiver of a ControlVm command with a - * PayloadVmOffset will dereference this address and then use connection_offset, - * initiator_offset, and target_offset to get the location of UTF-8 formatted - * strings that can be parsed to obtain command-specific information. The value - * of total_length should equal PayloadBytes. The format of the strings at - * PayloadVmOffset will take different forms depending on the message. - */ -struct visor_controlvm_parameters_header { - u32 total_length; - u32 header_length; - u32 connection_offset; - u32 connection_length; - u32 initiator_offset; - u32 initiator_length; - u32 target_offset; - u32 target_length; - u32 client_offset; - u32 client_length; - u32 name_offset; - u32 name_length; - guid_t id; - u32 revision; - /* Natural alignment */ - u32 reserved; -} __packed; - -/* General Errors------------------------------------------------------[0-99] */ -#define CONTROLVM_RESP_SUCCESS 0 -#define CONTROLVM_RESP_ALREADY_DONE 1 -#define CONTROLVM_RESP_IOREMAP_FAILED 2 -#define CONTROLVM_RESP_KMALLOC_FAILED 3 -#define CONTROLVM_RESP_ID_UNKNOWN 4 -#define CONTROLVM_RESP_ID_INVALID_FOR_CLIENT 5 -/* CONTROLVM_INIT_CHIPSET-------------------------------------------[100-199] */ -#define CONTROLVM_RESP_CLIENT_SWITCHCOUNT_NONZERO 100 -#define CONTROLVM_RESP_EXPECTED_CHIPSET_INIT 101 -/* Maximum Limit----------------------------------------------------[200-299] */ -/* BUS_CREATE */ -#define CONTROLVM_RESP_ERROR_MAX_BUSES 201 -/* DEVICE_CREATE */ -#define CONTROLVM_RESP_ERROR_MAX_DEVICES 202 -/* Payload and Parameter Related------------------------------------[400-499] */ -/* SWITCH_ATTACHEXTPORT, DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_PAYLOAD_INVALID 400 -/* Multiple */ -#define CONTROLVM_RESP_INITIATOR_PARAMETER_INVALID 401 -/* DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_TARGET_PARAMETER_INVALID 402 -/* DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_CLIENT_PARAMETER_INVALID 403 -/* Specified[Packet Structure] Value--------------------------------[500-599] */ -/* SWITCH_ATTACHINTPORT */ -/* BUS_CONFIGURE, DEVICE_CREATE, DEVICE_CONFIG, DEVICE_DESTROY */ -#define CONTROLVM_RESP_BUS_INVALID 500 -/* SWITCH_ATTACHINTPORT*/ -/* DEVICE_CREATE, DEVICE_CONFIGURE, DEVICE_DESTROY */ -#define CONTROLVM_RESP_DEVICE_INVALID 501 -/* DEVICE_CREATE, DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_CHANNEL_INVALID 502 -/* Partition Driver Callback Interface------------------------------[600-699] */ -/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */ -#define CONTROLVM_RESP_VIRTPCI_DRIVER_FAILURE 604 -/* Unable to invoke VIRTPCI callback. VIRTPCI Callback returned error. */ -/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */ -#define CONTROLVM_RESP_VIRTPCI_DRIVER_CALLBACK_ERROR 605 -/* Generic device callback returned error. */ -/* SWITCH_ATTACHEXTPORT, SWITCH_DETACHEXTPORT, DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_GENERIC_DRIVER_CALLBACK_ERROR 606 -/* Bus Related------------------------------------------------------[700-799] */ -/* BUS_DESTROY */ -#define CONTROLVM_RESP_ERROR_BUS_DEVICE_ATTACHED 700 -/* Channel Related--------------------------------------------------[800-899] */ -/* GET_CHANNELINFO, DEVICE_DESTROY */ -#define CONTROLVM_RESP_CHANNEL_TYPE_UNKNOWN 800 -/* DEVICE_CREATE */ -#define CONTROLVM_RESP_CHANNEL_SIZE_TOO_SMALL 801 -/* Chipset Shutdown Related---------------------------------------[1000-1099] */ -#define CONTROLVM_RESP_CHIPSET_SHUTDOWN_FAILED 1000 -#define CONTROLVM_RESP_CHIPSET_SHUTDOWN_ALREADY_ACTIVE 1001 -/* Chipset Stop Related-------------------------------------------[1100-1199] */ -#define CONTROLVM_RESP_CHIPSET_STOP_FAILED_BUS 1100 -#define CONTROLVM_RESP_CHIPSET_STOP_FAILED_SWITCH 1101 -/* Device Related-------------------------------------------------[1400-1499] */ -#define CONTROLVM_RESP_DEVICE_UDEV_TIMEOUT 1400 - -/* __CONTROLVMCHANNEL_H__ */ -#endif |