diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 221 |
1 files changed, 125 insertions, 96 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index 91857b81009e..1cc8a7a69457 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -790,10 +790,6 @@ static int cxgb4vf_open(struct net_device *dev) /* * Note that this interface is up and start everything up ... */ - netif_set_real_num_tx_queues(dev, pi->nqsets); - err = netif_set_real_num_rx_queues(dev, pi->nqsets); - if (err) - goto err_unwind; err = link_start(dev); if (err) goto err_unwind; @@ -2176,6 +2172,73 @@ static void cleanup_debugfs(struct adapter *adapter) /* nothing to do */ } +/* Figure out how many Ports and Queue Sets we can support. This depends on + * knowing our Virtual Function Resources and may be called a second time if + * we fall back from MSI-X to MSI Interrupt Mode. + */ +static void size_nports_qsets(struct adapter *adapter) +{ + struct vf_resources *vfres = &adapter->params.vfres; + unsigned int ethqsets, pmask_nports; + + /* The number of "ports" which we support is equal to the number of + * Virtual Interfaces with which we've been provisioned. + */ + adapter->params.nports = vfres->nvi; + if (adapter->params.nports > MAX_NPORTS) { + dev_warn(adapter->pdev_dev, "only using %d of %d maximum" + " allowed virtual interfaces\n", MAX_NPORTS, + adapter->params.nports); + adapter->params.nports = MAX_NPORTS; + } + + /* We may have been provisioned with more VIs than the number of + * ports we're allowed to access (our Port Access Rights Mask). + * This is obviously a configuration conflict but we don't want to + * crash the kernel or anything silly just because of that. + */ + pmask_nports = hweight32(adapter->params.vfres.pmask); + if (pmask_nports < adapter->params.nports) { + dev_warn(adapter->pdev_dev, "only using %d of %d provissioned" + " virtual interfaces; limited by Port Access Rights" + " mask %#x\n", pmask_nports, adapter->params.nports, + adapter->params.vfres.pmask); + adapter->params.nports = pmask_nports; + } + + /* We need to reserve an Ingress Queue for the Asynchronous Firmware + * Event Queue. And if we're using MSI Interrupts, we'll also need to + * reserve an Ingress Queue for a Forwarded Interrupts. + * + * The rest of the FL/Intr-capable ingress queues will be matched up + * one-for-one with Ethernet/Control egress queues in order to form + * "Queue Sets" which will be aportioned between the "ports". For + * each Queue Set, we'll need the ability to allocate two Egress + * Contexts -- one for the Ingress Queue Free List and one for the TX + * Ethernet Queue. + * + * Note that even if we're currently configured to use MSI-X + * Interrupts (module variable msi == MSI_MSIX) we may get downgraded + * to MSI Interrupts if we can't get enough MSI-X Interrupts. If that + * happens we'll need to adjust things later. + */ + ethqsets = vfres->niqflint - 1 - (msi == MSI_MSI); + if (vfres->nethctrl != ethqsets) + ethqsets = min(vfres->nethctrl, ethqsets); + if (vfres->neq < ethqsets*2) + ethqsets = vfres->neq/2; + if (ethqsets > MAX_ETH_QSETS) + ethqsets = MAX_ETH_QSETS; + adapter->sge.max_ethqsets = ethqsets; + + if (adapter->sge.max_ethqsets < adapter->params.nports) { + dev_warn(adapter->pdev_dev, "only using %d of %d available" + " virtual interfaces (too few Queue Sets)\n", + adapter->sge.max_ethqsets, adapter->params.nports); + adapter->params.nports = adapter->sge.max_ethqsets; + } +} + /* * Perform early "adapter" initialization. This is where we discover what * adapter parameters we're going to be using and initialize basic adapter @@ -2183,10 +2246,8 @@ static void cleanup_debugfs(struct adapter *adapter) */ static int adap_init0(struct adapter *adapter) { - struct vf_resources *vfres = &adapter->params.vfres; struct sge_params *sge_params = &adapter->params.sge; struct sge *s = &adapter->sge; - unsigned int ethqsets; int err; u32 param, val = 0; @@ -2295,69 +2356,23 @@ static int adap_init0(struct adapter *adapter) return err; } - /* - * The number of "ports" which we support is equal to the number of - * Virtual Interfaces with which we've been provisioned. - */ - adapter->params.nports = vfres->nvi; - if (adapter->params.nports > MAX_NPORTS) { - dev_warn(adapter->pdev_dev, "only using %d of %d allowed" - " virtual interfaces\n", MAX_NPORTS, - adapter->params.nports); - adapter->params.nports = MAX_NPORTS; - } - - /* - * We need to reserve a number of the ingress queues with Free List - * and Interrupt capabilities for special interrupt purposes (like - * asynchronous firmware messages, or forwarded interrupts if we're - * using MSI). The rest of the FL/Intr-capable ingress queues will be - * matched up one-for-one with Ethernet/Control egress queues in order - * to form "Queue Sets" which will be aportioned between the "ports". - * For each Queue Set, we'll need the ability to allocate two Egress - * Contexts -- one for the Ingress Queue Free List and one for the TX - * Ethernet Queue. - */ - ethqsets = vfres->niqflint - INGQ_EXTRAS; - if (vfres->nethctrl != ethqsets) { - dev_warn(adapter->pdev_dev, "unequal number of [available]" - " ingress/egress queues (%d/%d); using minimum for" - " number of Queue Sets\n", ethqsets, vfres->nethctrl); - ethqsets = min(vfres->nethctrl, ethqsets); - } - if (vfres->neq < ethqsets*2) { - dev_warn(adapter->pdev_dev, "Not enough Egress Contexts (%d)" - " to support Queue Sets (%d); reducing allowed Queue" - " Sets\n", vfres->neq, ethqsets); - ethqsets = vfres->neq/2; - } - if (ethqsets > MAX_ETH_QSETS) { - dev_warn(adapter->pdev_dev, "only using %d of %d allowed Queue" - " Sets\n", MAX_ETH_QSETS, adapter->sge.max_ethqsets); - ethqsets = MAX_ETH_QSETS; - } - if (vfres->niq != 0 || vfres->neq > ethqsets*2) { - dev_warn(adapter->pdev_dev, "unused resources niq/neq (%d/%d)" - " ignored\n", vfres->niq, vfres->neq - ethqsets*2); - } - adapter->sge.max_ethqsets = ethqsets; - - /* - * Check for various parameter sanity issues. Most checks simply - * result in us using fewer resources than our provissioning but we - * do need at least one "port" with which to work ... - */ - if (adapter->sge.max_ethqsets < adapter->params.nports) { - dev_warn(adapter->pdev_dev, "only using %d of %d available" - " virtual interfaces (too few Queue Sets)\n", - adapter->sge.max_ethqsets, adapter->params.nports); - adapter->params.nports = adapter->sge.max_ethqsets; + /* Check for various parameter sanity issues */ + if (adapter->params.vfres.pmask == 0) { + dev_err(adapter->pdev_dev, "no port access configured\n" + "usable!\n"); + return -EINVAL; } - if (adapter->params.nports == 0) { + if (adapter->params.vfres.nvi == 0) { dev_err(adapter->pdev_dev, "no virtual interfaces configured/" "usable!\n"); return -EINVAL; } + + /* Initialize nports and max_ethqsets now that we have our Virtual + * Function Resources. + */ + size_nports_qsets(adapter); + return 0; } @@ -2771,6 +2786,40 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, } } + /* See what interrupts we'll be using. If we've been configured to + * use MSI-X interrupts, try to enable them but fall back to using + * MSI interrupts if we can't enable MSI-X interrupts. If we can't + * get MSI interrupts we bail with the error. + */ + if (msi == MSI_MSIX && enable_msix(adapter) == 0) + adapter->flags |= USING_MSIX; + else { + if (msi == MSI_MSIX) { + dev_info(adapter->pdev_dev, + "Unable to use MSI-X Interrupts; falling " + "back to MSI Interrupts\n"); + + /* We're going to need a Forwarded Interrupt Queue so + * that may cut into how many Queue Sets we can + * support. + */ + msi = MSI_MSI; + size_nports_qsets(adapter); + } + err = pci_enable_msi(pdev); + if (err) { + dev_err(&pdev->dev, "Unable to allocate MSI Interrupts;" + " err=%d\n", err); + goto err_free_dev; + } + adapter->flags |= USING_MSI; + } + + /* Now that we know how many "ports" we have and what interrupt + * mechanism we're going to use, we can configure our queue resources. + */ + cfg_queues(adapter); + /* * The "card" is now ready to go. If any errors occur during device * registration we do not fail the whole "card" but rather proceed @@ -2778,10 +2827,14 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, * must register at least one net device. */ for_each_port(adapter, pidx) { + struct port_info *pi = netdev_priv(adapter->port[pidx]); netdev = adapter->port[pidx]; if (netdev == NULL) continue; + netif_set_real_num_tx_queues(netdev, pi->nqsets); + netif_set_real_num_rx_queues(netdev, pi->nqsets); + err = register_netdev(netdev); if (err) { dev_warn(&pdev->dev, "cannot register net device %s," @@ -2793,7 +2846,7 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, } if (adapter->registered_device_map == 0) { dev_err(&pdev->dev, "could not register any net devices\n"); - goto err_free_dev; + goto err_disable_interrupts; } /* @@ -2811,32 +2864,6 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, } /* - * See what interrupts we'll be using. If we've been configured to - * use MSI-X interrupts, try to enable them but fall back to using - * MSI interrupts if we can't enable MSI-X interrupts. If we can't - * get MSI interrupts we bail with the error. - */ - if (msi == MSI_MSIX && enable_msix(adapter) == 0) - adapter->flags |= USING_MSIX; - else { - err = pci_enable_msi(pdev); - if (err) { - dev_err(&pdev->dev, "Unable to allocate %s interrupts;" - " err=%d\n", - msi == MSI_MSIX ? "MSI-X or MSI" : "MSI", err); - goto err_free_debugfs; - } - adapter->flags |= USING_MSI; - } - - /* - * Now that we know how many "ports" we have and what their types are, - * and how many Queue Sets we can support, we can configure our queue - * resources. - */ - cfg_queues(adapter); - - /* * Print a short notice on the existence and configuration of the new * VF network device ... */ @@ -2856,11 +2883,13 @@ static int cxgb4vf_pci_probe(struct pci_dev *pdev, * Error recovery and exit code. Unwind state that's been created * so far and return the error. */ - -err_free_debugfs: - if (!IS_ERR_OR_NULL(adapter->debugfs_root)) { - cleanup_debugfs(adapter); - debugfs_remove_recursive(adapter->debugfs_root); +err_disable_interrupts: + if (adapter->flags & USING_MSIX) { + pci_disable_msix(adapter->pdev); + adapter->flags &= ~USING_MSIX; + } else if (adapter->flags & USING_MSI) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~USING_MSI; } err_free_dev: |