diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mfd/wm8994-core.c | 82 |
1 files changed, 30 insertions, 52 deletions
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 016769475ffb..aafac5b5f3a5 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -28,11 +28,7 @@ #include <linux/mfd/wm8994/pdata.h> #include <linux/mfd/wm8994/registers.h> -static int wm8994_read(struct wm8994 *wm8994, unsigned short reg, - int bytes, void *dest) -{ - return regmap_raw_read(wm8994->regmap, reg, dest, bytes); -} +#include "wm8994.h" /** * wm8994_reg_read: Read a single WM8994 register. @@ -68,12 +64,6 @@ int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, return regmap_bulk_read(wm8994->regmap, reg, buf, count); } -static int wm8994_write(struct wm8994 *wm8994, unsigned short reg, - int bytes, const void *src) -{ - return regmap_raw_write(wm8994->regmap, reg, src, bytes); -} - /** * wm8994_reg_write: Write a single WM8994 register. * @@ -258,27 +248,14 @@ static int wm8994_suspend(struct device *dev) WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD); - /* GPIO configuration state is saved here since we may be configuring - * the GPIO alternate functions even if we're not using the gpiolib - * driver for them. - */ - ret = wm8994_read(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2, - &wm8994->gpio_regs); - if (ret < 0) - dev_err(dev, "Failed to save GPIO registers: %d\n", ret); - - /* For similar reasons we also stash the regulator states */ - ret = wm8994_read(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2, - &wm8994->ldo_regs); - if (ret < 0) - dev_err(dev, "Failed to save LDO registers: %d\n", ret); - /* Explicitly put the device into reset in case regulators * don't get disabled in order to ensure consistent restart. */ wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET)); + regcache_mark_dirty(wm8994->regmap); + wm8994->suspended = true; ret = regulator_bulk_disable(wm8994->num_supplies, @@ -294,7 +271,7 @@ static int wm8994_suspend(struct device *dev) static int wm8994_resume(struct device *dev) { struct wm8994 *wm8994 = dev_get_drvdata(dev); - int ret, i; + int ret; /* We may have lied to the PM core about suspending */ if (!wm8994->suspended) @@ -307,27 +284,12 @@ static int wm8994_resume(struct device *dev) return ret; } - /* Write register at a time as we use the cache on the CPU so store - * it in native endian. - */ - for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) { - ret = wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK - + i, wm8994->irq_masks_cur[i]); - if (ret < 0) - dev_err(dev, "Failed to restore interrupt masks: %d\n", - ret); + ret = regcache_sync(wm8994->regmap); + if (ret != 0) { + dev_err(dev, "Failed to restore register map: %d\n", ret); + goto err_enable; } - ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2, - &wm8994->ldo_regs); - if (ret < 0) - dev_err(dev, "Failed to restore LDO registers: %d\n", ret); - - ret = wm8994_write(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2, - &wm8994->gpio_regs); - if (ret < 0) - dev_err(dev, "Failed to restore GPIO registers: %d\n", ret); - /* Disable LDO pulldowns while the device is active */ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, @@ -336,6 +298,11 @@ static int wm8994_resume(struct device *dev) wm8994->suspended = false; return 0; + +err_enable: + regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); + + return ret; } #endif @@ -361,11 +328,6 @@ static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) } #endif -static struct regmap_config wm8994_regmap_config = { - .reg_bits = 16, - .val_bits = 16, -}; - /* * Instantiate the generic non-control parts of the device. */ @@ -594,6 +556,7 @@ static int wm8994_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct wm8994 *wm8994; + struct regmap_config *regmap_config; int ret; wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL); @@ -605,7 +568,22 @@ static int wm8994_i2c_probe(struct i2c_client *i2c, wm8994->irq = i2c->irq; wm8994->type = id->driver_data; - wm8994->regmap = regmap_init_i2c(i2c, &wm8994_regmap_config); + switch (wm8994->type) { + case WM1811: + regmap_config = &wm1811_regmap_config; + break; + case WM8994: + regmap_config = &wm8994_regmap_config; + break; + case WM8958: + regmap_config = &wm8958_regmap_config; + break; + default: + dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type); + return -EINVAL; + } + + wm8994->regmap = regmap_init_i2c(i2c, regmap_config); if (IS_ERR(wm8994->regmap)) { ret = PTR_ERR(wm8994->regmap); dev_err(wm8994->dev, "Failed to allocate register map: %d\n", |