diff options
Diffstat (limited to 'fs/xfs/xfs_log.c')
-rw-r--r-- | fs/xfs/xfs_log.c | 964 |
1 files changed, 440 insertions, 524 deletions
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 89fec9a18c34..f02a0dd522b3 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -49,7 +49,6 @@ xlog_state_get_iclog_space( int len, struct xlog_in_core **iclog, struct xlog_ticket *ticket, - int *continued_write, int *logoffsetp); STATIC void xlog_grant_push_ail( @@ -58,13 +57,10 @@ xlog_grant_push_ail( STATIC void xlog_sync( struct xlog *log, - struct xlog_in_core *iclog); + struct xlog_in_core *iclog, + struct xlog_ticket *ticket); #if defined(DEBUG) STATIC void -xlog_verify_dest_ptr( - struct xlog *log, - void *ptr); -STATIC void xlog_verify_grant_tail( struct xlog *log); STATIC void @@ -77,7 +73,6 @@ xlog_verify_tail_lsn( struct xlog *log, struct xlog_in_core *iclog); #else -#define xlog_verify_dest_ptr(a,b) #define xlog_verify_grant_tail(a) #define xlog_verify_iclog(a,b,c) #define xlog_verify_tail_lsn(a,b) @@ -90,6 +85,62 @@ xlog_iclogs_empty( static int xfs_log_cover(struct xfs_mount *); +/* + * We need to make sure the buffer pointer returned is naturally aligned for the + * biggest basic data type we put into it. We have already accounted for this + * padding when sizing the buffer. + * + * However, this padding does not get written into the log, and hence we have to + * track the space used by the log vectors separately to prevent log space hangs + * due to inaccurate accounting (i.e. a leak) of the used log space through the + * CIL context ticket. + * + * We also add space for the xlog_op_header that describes this region in the + * log. This prepends the data region we return to the caller to copy their data + * into, so do all the static initialisation of the ophdr now. Because the ophdr + * is not 8 byte aligned, we have to be careful to ensure that we align the + * start of the buffer such that the region we return to the call is 8 byte + * aligned and packed against the tail of the ophdr. + */ +void * +xlog_prepare_iovec( + struct xfs_log_vec *lv, + struct xfs_log_iovec **vecp, + uint type) +{ + struct xfs_log_iovec *vec = *vecp; + struct xlog_op_header *oph; + uint32_t len; + void *buf; + + if (vec) { + ASSERT(vec - lv->lv_iovecp < lv->lv_niovecs); + vec++; + } else { + vec = &lv->lv_iovecp[0]; + } + + len = lv->lv_buf_len + sizeof(struct xlog_op_header); + if (!IS_ALIGNED(len, sizeof(uint64_t))) { + lv->lv_buf_len = round_up(len, sizeof(uint64_t)) - + sizeof(struct xlog_op_header); + } + + vec->i_type = type; + vec->i_addr = lv->lv_buf + lv->lv_buf_len; + + oph = vec->i_addr; + oph->oh_clientid = XFS_TRANSACTION; + oph->oh_res2 = 0; + oph->oh_flags = 0; + + buf = vec->i_addr + sizeof(struct xlog_op_header); + ASSERT(IS_ALIGNED((unsigned long)buf, sizeof(uint64_t))); + + *vecp = vec; + return buf; +} + static void xlog_grant_sub_space( struct xlog *log, @@ -175,12 +226,12 @@ xlog_ticket_reservation( if (head == &log->l_write_head) { ASSERT(tic->t_flags & XLOG_TIC_PERM_RESERV); return tic->t_unit_res; - } else { - if (tic->t_flags & XLOG_TIC_PERM_RESERV) - return tic->t_unit_res * tic->t_cnt; - else - return tic->t_unit_res; } + + if (tic->t_flags & XLOG_TIC_PERM_RESERV) + return tic->t_unit_res * tic->t_cnt; + + return tic->t_unit_res; } STATIC bool @@ -322,30 +373,6 @@ xlog_grant_head_check( return error; } -static void -xlog_tic_reset_res(xlog_ticket_t *tic) -{ - tic->t_res_num = 0; - tic->t_res_arr_sum = 0; - tic->t_res_num_ophdrs = 0; -} - -static void -xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type) -{ - if (tic->t_res_num == XLOG_TIC_LEN_MAX) { - /* add to overflow and start again */ - tic->t_res_o_flow += tic->t_res_arr_sum; - tic->t_res_num = 0; - tic->t_res_arr_sum = 0; - } - - tic->t_res_arr[tic->t_res_num].r_len = len; - tic->t_res_arr[tic->t_res_num].r_type = type; - tic->t_res_arr_sum += len; - tic->t_res_num++; -} - bool xfs_log_writable( struct xfs_mount *mp) @@ -395,8 +422,6 @@ xfs_log_regrant( xlog_grant_push_ail(log, tic->t_unit_res); tic->t_curr_res = tic->t_unit_res; - xlog_tic_reset_res(tic); - if (tic->t_cnt > 0) return 0; @@ -434,10 +459,9 @@ out_error: int xfs_log_reserve( struct xfs_mount *mp, - int unit_bytes, - int cnt, + int unit_bytes, + int cnt, struct xlog_ticket **ticp, - uint8_t client, bool permanent) { struct xlog *log = mp->m_log; @@ -445,15 +469,13 @@ xfs_log_reserve( int need_bytes; int error = 0; - ASSERT(client == XFS_TRANSACTION || client == XFS_LOG); - if (xlog_is_shutdown(log)) return -EIO; XFS_STATS_INC(mp, xs_try_logspace); ASSERT(*ticp == NULL); - tic = xlog_ticket_alloc(log, unit_bytes, cnt, client, permanent); + tic = xlog_ticket_alloc(log, unit_bytes, cnt, permanent); *ticp = tic; xlog_grant_push_ail(log, tic->t_cnt ? tic->t_unit_res * tic->t_cnt @@ -487,7 +509,10 @@ out_error: * Run all the pending iclog callbacks and wake log force waiters and iclog * space waiters so they can process the newly set shutdown state. We really * don't care what order we process callbacks here because the log is shut down - * and so state cannot change on disk anymore. + * and so state cannot change on disk anymore. However, we cannot wake waiters + * until the callbacks have been processed because we may be in unmount and + * we must ensure that all AIL operations the callbacks perform have completed + * before we tear down the AIL. * * We avoid processing actively referenced iclogs so that we don't run callbacks * while the iclog owner might still be preparing the iclog for IO submssion. @@ -501,7 +526,6 @@ xlog_state_shutdown_callbacks( struct xlog_in_core *iclog; LIST_HEAD(cb_list); - spin_lock(&log->l_icloglock); iclog = log->l_iclog; do { if (atomic_read(&iclog->ic_refcnt)) { @@ -509,26 +533,22 @@ xlog_state_shutdown_callbacks( continue; } list_splice_init(&iclog->ic_callbacks, &cb_list); + spin_unlock(&log->l_icloglock); + + xlog_cil_process_committed(&cb_list); + + spin_lock(&log->l_icloglock); wake_up_all(&iclog->ic_write_wait); wake_up_all(&iclog->ic_force_wait); } while ((iclog = iclog->ic_next) != log->l_iclog); wake_up_all(&log->l_flush_wait); - spin_unlock(&log->l_icloglock); - - xlog_cil_process_committed(&cb_list); } /* * Flush iclog to disk if this is the last reference to the given iclog and the * it is in the WANT_SYNC state. * - * If the caller passes in a non-zero @old_tail_lsn and the current log tail - * does not match, there may be metadata on disk that must be persisted before - * this iclog is written. To satisfy that requirement, set the - * XLOG_ICL_NEED_FLUSH flag as a condition for writing this iclog with the new - * log tail value. - * * If XLOG_ICL_NEED_FUA is already set on the iclog, we need to ensure that the * log tail is updated correctly. NEED_FUA indicates that the iclog will be * written to stable storage, and implies that a commit record is contained @@ -545,12 +565,11 @@ xlog_state_shutdown_callbacks( * always capture the tail lsn on the iclog on the first NEED_FUA release * regardless of the number of active reference counts on this iclog. */ - int xlog_state_release_iclog( struct xlog *log, struct xlog_in_core *iclog, - xfs_lsn_t old_tail_lsn) + struct xlog_ticket *ticket) { xfs_lsn_t tail_lsn; bool last_ref; @@ -561,18 +580,14 @@ xlog_state_release_iclog( /* * Grabbing the current log tail needs to be atomic w.r.t. the writing * of the tail LSN into the iclog so we guarantee that the log tail does - * not move between deciding if a cache flush is required and writing - * the LSN into the iclog below. + * not move between the first time we know that the iclog needs to be + * made stable and when we eventually submit it. */ - if (old_tail_lsn || iclog->ic_state == XLOG_STATE_WANT_SYNC) { + if ((iclog->ic_state == XLOG_STATE_WANT_SYNC || + (iclog->ic_flags & XLOG_ICL_NEED_FUA)) && + !iclog->ic_header.h_tail_lsn) { tail_lsn = xlog_assign_tail_lsn(log->l_mp); - - if (old_tail_lsn && tail_lsn != old_tail_lsn) - iclog->ic_flags |= XLOG_ICL_NEED_FLUSH; - - if ((iclog->ic_flags & XLOG_ICL_NEED_FUA) && - !iclog->ic_header.h_tail_lsn) - iclog->ic_header.h_tail_lsn = cpu_to_be64(tail_lsn); + iclog->ic_header.h_tail_lsn = cpu_to_be64(tail_lsn); } last_ref = atomic_dec_and_test(&iclog->ic_refcnt); @@ -583,11 +598,8 @@ xlog_state_release_iclog( * pending iclog callbacks that were waiting on the release of * this iclog. */ - if (last_ref) { - spin_unlock(&log->l_icloglock); + if (last_ref) xlog_state_shutdown_callbacks(log); - spin_lock(&log->l_icloglock); - } return -EIO; } @@ -600,13 +612,11 @@ xlog_state_release_iclog( } iclog->ic_state = XLOG_STATE_SYNCING; - if (!iclog->ic_header.h_tail_lsn) - iclog->ic_header.h_tail_lsn = cpu_to_be64(tail_lsn); xlog_verify_tail_lsn(log, iclog); trace_xlog_iclog_syncing(iclog, _RET_IP_); spin_unlock(&log->l_icloglock); - xlog_sync(log, iclog); + xlog_sync(log, iclog, ticket); spin_lock(&log->l_icloglock); return 0; } @@ -812,10 +822,9 @@ xfs_log_mount_finish( * mount failure occurs. */ mp->m_super->s_flags |= SB_ACTIVE; + xfs_log_work_queue(mp); if (xlog_recovery_needed(log)) error = xlog_recover_finish(log); - if (!error) - xfs_log_work_queue(mp); mp->m_super->s_flags &= ~SB_ACTIVE; evict_inodes(mp->m_super); @@ -874,7 +883,7 @@ xlog_force_iclog( iclog->ic_flags |= XLOG_ICL_NEED_FLUSH | XLOG_ICL_NEED_FUA; if (iclog->ic_state == XLOG_STATE_ACTIVE) xlog_state_switch_iclogs(iclog->ic_log, iclog, 0); - return xlog_state_release_iclog(iclog->ic_log, iclog, 0); + return xlog_state_release_iclog(iclog->ic_log, iclog, NULL); } /* @@ -915,23 +924,39 @@ xlog_write_unmount_record( struct xlog *log, struct xlog_ticket *ticket) { - struct xfs_unmount_log_format ulf = { - .magic = XLOG_UNMOUNT_TYPE, + struct { + struct xlog_op_header ophdr; + struct xfs_unmount_log_format ulf; + } unmount_rec = { + .ophdr = { + .oh_clientid = XFS_LOG, + .oh_tid = cpu_to_be32(ticket->t_tid), + .oh_flags = XLOG_UNMOUNT_TRANS, + }, + .ulf = { + .magic = XLOG_UNMOUNT_TYPE, + }, }; struct xfs_log_iovec reg = { - .i_addr = &ulf, - .i_len = sizeof(ulf), + .i_addr = &unmount_rec, + .i_len = sizeof(unmount_rec), .i_type = XLOG_REG_TYPE_UNMOUNT, }; struct xfs_log_vec vec = { .lv_niovecs = 1, .lv_iovecp = ®, }; + LIST_HEAD(lv_chain); + list_add(&vec.lv_list, &lv_chain); + + BUILD_BUG_ON((sizeof(struct xlog_op_header) + + sizeof(struct xfs_unmount_log_format)) != + sizeof(unmount_rec)); /* account for space used by record data */ - ticket->t_curr_res -= sizeof(ulf); + ticket->t_curr_res -= sizeof(unmount_rec); - return xlog_write(log, NULL, &vec, ticket, XLOG_UNMOUNT_TRANS); + return xlog_write(log, NULL, &lv_chain, ticket, reg.i_len); } /* @@ -947,7 +972,7 @@ xlog_unmount_write( struct xlog_ticket *tic = NULL; int error; - error = xfs_log_reserve(mp, 600, 1, &tic, XFS_LOG, 0); + error = xfs_log_reserve(mp, 600, 1, &tic, 0); if (error) goto out_err; @@ -1102,7 +1127,7 @@ xfs_log_item_init( int type, const struct xfs_item_ops *ops) { - item->li_mountp = mp; + item->li_log = mp->m_log; item->li_ailp = mp->m_ail; item->li_type = type; item->li_ops = ops; @@ -1374,7 +1399,7 @@ xlog_ioend_work( */ if (XFS_TEST_ERROR(error, log->l_mp, XFS_ERRTAG_IODONE_IOERR)) { xfs_alert(log->l_mp, "log I/O error %d", error); - xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR); + xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); } xlog_state_done_syncing(iclog); @@ -1598,9 +1623,6 @@ xlog_alloc_log( GFP_KERNEL | __GFP_RETRY_MAYFAIL); if (!iclog->ic_data) goto out_free_iclog; -#ifdef DEBUG - log->l_iclog_bak[i] = &iclog->ic_header; -#endif head = &iclog->ic_header; memset(head, 0, sizeof(xlog_rec_header_t)); head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM); @@ -1616,7 +1638,7 @@ xlog_alloc_log( iclog->ic_log = log; atomic_set(&iclog->ic_refcnt, 0); INIT_LIST_HEAD(&iclog->ic_callbacks); - iclog->ic_datap = (char *)iclog->ic_data + log->l_iclog_hsize; + iclog->ic_datap = (void *)iclog->ic_data + log->l_iclog_hsize; init_waitqueue_head(&iclog->ic_force_wait); init_waitqueue_head(&iclog->ic_write_wait); @@ -1883,19 +1905,19 @@ xlog_write_iclog( return; } - bio_init(&iclog->ic_bio, iclog->ic_bvec, howmany(count, PAGE_SIZE)); - bio_set_dev(&iclog->ic_bio, log->l_targ->bt_bdev); - iclog->ic_bio.bi_iter.bi_sector = log->l_logBBstart + bno; - iclog->ic_bio.bi_end_io = xlog_bio_end_io; - iclog->ic_bio.bi_private = iclog; - /* * We use REQ_SYNC | REQ_IDLE here to tell the block layer the are more * IOs coming immediately after this one. This prevents the block layer * writeback throttle from throttling log writes behind background * metadata writeback and causing priority inversions. */ - iclog->ic_bio.bi_opf = REQ_OP_WRITE | REQ_META | REQ_SYNC | REQ_IDLE; + bio_init(&iclog->ic_bio, log->l_targ->bt_bdev, iclog->ic_bvec, + howmany(count, PAGE_SIZE), + REQ_OP_WRITE | REQ_META | REQ_SYNC | REQ_IDLE); + iclog->ic_bio.bi_iter.bi_sector = log->l_logBBstart + bno; + iclog->ic_bio.bi_end_io = xlog_bio_end_io; + iclog->ic_bio.bi_private = iclog; + if (iclog->ic_flags & XLOG_ICL_NEED_FLUSH) { iclog->ic_bio.bi_opf |= REQ_PREFLUSH; /* @@ -1903,9 +1925,17 @@ xlog_write_iclog( * device cache first to ensure all metadata writeback covered * by the LSN in this iclog is on stable storage. This is slow, * but it *must* complete before we issue the external log IO. + * + * If the flush fails, we cannot conclude that past metadata + * writeback from the log succeeded. Repeating the flush is + * not possible, hence we must shut down with log IO error to + * avoid shutdown re-entering this path and erroring out again. */ - if (log->l_targ != log->l_mp->m_ddev_targp) - blkdev_issue_flush(log->l_mp->m_ddev_targp->bt_bdev); + if (log->l_targ != log->l_mp->m_ddev_targp && + blkdev_issue_flush(log->l_mp->m_ddev_targp->bt_bdev)) { + xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); + return; + } } if (iclog->ic_flags & XLOG_ICL_NEED_FUA) iclog->ic_bio.bi_opf |= REQ_FUA; @@ -1913,7 +1943,7 @@ xlog_write_iclog( iclog->ic_flags &= ~(XLOG_ICL_NEED_FLUSH | XLOG_ICL_NEED_FUA); if (xlog_map_iclog_data(&iclog->ic_bio, iclog->ic_data, count)) { - xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR); + xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); return; } if (is_vmalloc_addr(iclog->ic_data)) @@ -1982,7 +2012,7 @@ xlog_calc_iclog_size( } /* - * Flush out the in-core log (iclog) to the on-disk log in an asynchronous + * Flush out the in-core log (iclog) to the on-disk log in an asynchronous * fashion. Previously, we should have moved the current iclog * ptr in the log to point to the next available iclog. This allows further * write to continue while this code syncs out an iclog ready to go. @@ -2007,7 +2037,8 @@ xlog_calc_iclog_size( STATIC void xlog_sync( struct xlog *log, - struct xlog_in_core *iclog) + struct xlog_in_core *iclog, + struct xlog_ticket *ticket) { unsigned int count; /* byte count of bwrite */ unsigned int roundoff; /* roundoff to BB or stripe */ @@ -2019,12 +2050,20 @@ xlog_sync( count = xlog_calc_iclog_size(log, iclog, &roundoff); - /* move grant heads by roundoff in sync */ - xlog_grant_add_space(log, &log->l_reserve_head.grant, roundoff); - xlog_grant_add_space(log, &log->l_write_head.grant, roundoff); + /* + * If we have a ticket, account for the roundoff via the ticket + * reservation to avoid touching the hot grant heads needlessly. + * Otherwise, we have to move grant heads directly. + */ + if (ticket) { + ticket->t_curr_res -= roundoff; + } else { + xlog_grant_add_space(log, &log->l_reserve_head.grant, roundoff); + xlog_grant_add_space(log, &log->l_write_head.grant, roundoff); + } /* put cycle number in every block */ - xlog_pack_data(log, iclog, roundoff); + xlog_pack_data(log, iclog, roundoff); /* real byte length */ size = iclog->ic_offset; @@ -2074,8 +2113,6 @@ xlog_dealloc_log( xlog_in_core_t *iclog, *next_iclog; int i; - xlog_cil_destroy(log); - /* * Cycle all the iclogbuf locks to make sure all log IO completion * is done before we tear down these buffers. @@ -2087,6 +2124,13 @@ xlog_dealloc_log( iclog = iclog->ic_next; } + /* + * Destroy the CIL after waiting for iclog IO completion because an + * iclog EIO error will try to shut down the log, which accesses the + * CIL to wake up the waiters. + */ + xlog_cil_destroy(log); + iclog = log->l_iclog; for (i = 0; i < log->l_iclog_bufs; i++) { next_iclog = iclog->ic_next; @@ -2125,63 +2169,11 @@ xlog_print_tic_res( struct xfs_mount *mp, struct xlog_ticket *ticket) { - uint i; - uint ophdr_spc = ticket->t_res_num_ophdrs * (uint)sizeof(xlog_op_header_t); - - /* match with XLOG_REG_TYPE_* in xfs_log.h */ -#define REG_TYPE_STR(type, str) [XLOG_REG_TYPE_##type] = str - static char *res_type_str[] = { - REG_TYPE_STR(BFORMAT, "bformat"), - REG_TYPE_STR(BCHUNK, "bchunk"), - REG_TYPE_STR(EFI_FORMAT, "efi_format"), - REG_TYPE_STR(EFD_FORMAT, "efd_format"), - REG_TYPE_STR(IFORMAT, "iformat"), - REG_TYPE_STR(ICORE, "icore"), - REG_TYPE_STR(IEXT, "iext"), - REG_TYPE_STR(IBROOT, "ibroot"), - REG_TYPE_STR(ILOCAL, "ilocal"), - REG_TYPE_STR(IATTR_EXT, "iattr_ext"), - REG_TYPE_STR(IATTR_BROOT, "iattr_broot"), - REG_TYPE_STR(IATTR_LOCAL, "iattr_local"), - REG_TYPE_STR(QFORMAT, "qformat"), - REG_TYPE_STR(DQUOT, "dquot"), - REG_TYPE_STR(QUOTAOFF, "quotaoff"), - REG_TYPE_STR(LRHEADER, "LR header"), - REG_TYPE_STR(UNMOUNT, "unmount"), - REG_TYPE_STR(COMMIT, "commit"), - REG_TYPE_STR(TRANSHDR, "trans header"), - REG_TYPE_STR(ICREATE, "inode create"), - REG_TYPE_STR(RUI_FORMAT, "rui_format"), - REG_TYPE_STR(RUD_FORMAT, "rud_format"), - REG_TYPE_STR(CUI_FORMAT, "cui_format"), - REG_TYPE_STR(CUD_FORMAT, "cud_format"), - REG_TYPE_STR(BUI_FORMAT, "bui_format"), - REG_TYPE_STR(BUD_FORMAT, "bud_format"), - }; - BUILD_BUG_ON(ARRAY_SIZE(res_type_str) != XLOG_REG_TYPE_MAX + 1); -#undef REG_TYPE_STR - xfs_warn(mp, "ticket reservation summary:"); - xfs_warn(mp, " unit res = %d bytes", - ticket->t_unit_res); - xfs_warn(mp, " current res = %d bytes", - ticket->t_curr_res); - xfs_warn(mp, " total reg = %u bytes (o/flow = %u bytes)", - ticket->t_res_arr_sum, ticket->t_res_o_flow); - xfs_warn(mp, " ophdrs = %u (ophdr space = %u bytes)", - ticket->t_res_num_ophdrs, ophdr_spc); - xfs_warn(mp, " ophdr + reg = %u bytes", - ticket->t_res_arr_sum + ticket->t_res_o_flow + ophdr_spc); - xfs_warn(mp, " num regions = %u", - ticket->t_res_num); - - for (i = 0; i < ticket->t_res_num; i++) { - uint r_type = ticket->t_res_arr[i].r_type; - xfs_warn(mp, "region[%u]: %s - %u bytes", i, - ((r_type <= 0 || r_type > XLOG_REG_TYPE_MAX) ? - "bad-rtype" : res_type_str[r_type]), - ticket->t_res_arr[i].r_len); - } + xfs_warn(mp, " unit res = %d bytes", ticket->t_unit_res); + xfs_warn(mp, " current res = %d bytes", ticket->t_curr_res); + xfs_warn(mp, " original count = %d", ticket->t_ocnt); + xfs_warn(mp, " remaining count = %d", ticket->t_cnt); } /* @@ -2234,187 +2226,226 @@ xlog_print_trans( } } +static inline void +xlog_write_iovec( + struct xlog_in_core *iclog, + uint32_t *log_offset, + void *data, + uint32_t write_len, + int *bytes_left, + uint32_t *record_cnt, + uint32_t *data_cnt) +{ + ASSERT(*log_offset < iclog->ic_log->l_iclog_size); + ASSERT(*log_offset % sizeof(int32_t) == 0); + ASSERT(write_len % sizeof(int32_t) == 0); + + memcpy(iclog->ic_datap + *log_offset, data, write_len); + *log_offset += write_len; + *bytes_left -= write_len; + (*record_cnt)++; + *data_cnt += write_len; +} + /* - * Calculate the potential space needed by the log vector. We may need a start - * record, and each region gets its own struct xlog_op_header and may need to be - * double word aligned. + * Write log vectors into a single iclog which is guaranteed by the caller + * to have enough space to write the entire log vector into. */ -static int -xlog_write_calc_vec_length( +static void +xlog_write_full( + struct xfs_log_vec *lv, struct xlog_ticket *ticket, - struct xfs_log_vec *log_vector, - uint optype) + struct xlog_in_core *iclog, + uint32_t *log_offset, + uint32_t *len, + uint32_t *record_cnt, + uint32_t *data_cnt) { - struct xfs_log_vec *lv; - int headers = 0; - int len = 0; - int i; + int index; - if (optype & XLOG_START_TRANS) - headers++; + ASSERT(*log_offset + *len <= iclog->ic_size || + iclog->ic_state == XLOG_STATE_WANT_SYNC); - for (lv = log_vector; lv; lv = lv->lv_next) { - /* we don't write ordered log vectors */ - if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED) - continue; - - headers += lv->lv_niovecs; - - for (i = 0; i < lv->lv_niovecs; i++) { - struct xfs_log_iovec *vecp = &lv->lv_iovecp[i]; + /* + * Ordered log vectors have no regions to write so this + * loop will naturally skip them. + */ + for (index = 0; index < lv->lv_niovecs; index++) { + struct xfs_log_iovec *reg = &lv->lv_iovecp[index]; + struct xlog_op_header *ophdr = reg->i_addr; - len += vecp->i_len; - xlog_tic_add_region(ticket, vecp->i_len, vecp->i_type); - } + ophdr->oh_tid = cpu_to_be32(ticket->t_tid); + xlog_write_iovec(iclog, log_offset, reg->i_addr, + reg->i_len, len, record_cnt, data_cnt); } - - ticket->t_res_num_ophdrs += headers; - len += headers * sizeof(struct xlog_op_header); - - return len; -} - -static void -xlog_write_start_rec( - struct xlog_op_header *ophdr, - struct xlog_ticket *ticket) -{ - ophdr->oh_tid = cpu_to_be32(ticket->t_tid); - ophdr->oh_clientid = ticket->t_clientid; - ophdr->oh_len = 0; - ophdr->oh_flags = XLOG_START_TRANS; - ophdr->oh_res2 = 0; } -static xlog_op_header_t * -xlog_write_setup_ophdr( - struct xlog *log, - struct xlog_op_header *ophdr, +static int +xlog_write_get_more_iclog_space( struct xlog_ticket *ticket, - uint flags) + struct xlog_in_core **iclogp, + uint32_t *log_offset, + uint32_t len, + uint32_t *record_cnt, + uint32_t *data_cnt) { - ophdr->oh_tid = cpu_to_be32(ticket->t_tid); - ophdr->oh_clientid = ticket->t_clientid; - ophdr->oh_res2 = 0; - - /* are we copying a commit or unmount record? */ - ophdr->oh_flags = flags; + struct xlog_in_core *iclog = *iclogp; + struct xlog *log = iclog->ic_log; + int error; - /* - * We've seen logs corrupted with bad transaction client ids. This - * makes sure that XFS doesn't generate them on. Turn this into an EIO - * and shut down the filesystem. - */ - switch (ophdr->oh_clientid) { - case XFS_TRANSACTION: - case XFS_VOLUME: - case XFS_LOG: - break; - default: - xfs_warn(log->l_mp, - "Bad XFS transaction clientid 0x%x in ticket "PTR_FMT, - ophdr->oh_clientid, ticket); - return NULL; - } + spin_lock(&log->l_icloglock); + ASSERT(iclog->ic_state == XLOG_STATE_WANT_SYNC); + xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt); + error = xlog_state_release_iclog(log, iclog, ticket); + spin_unlock(&log->l_icloglock); + if (error) + return error; - return ophdr; + error = xlog_state_get_iclog_space(log, len, &iclog, ticket, + log_offset); + if (error) + return error; + *record_cnt = 0; + *data_cnt = 0; + *iclogp = iclog; + return 0; } /* - * Set up the parameters of the region copy into the log. This has - * to handle region write split across multiple log buffers - this - * state is kept external to this function so that this code can - * be written in an obvious, self documenting manner. + * Write log vectors into a single iclog which is smaller than the current chain + * length. We write until we cannot fit a full record into the remaining space + * and then stop. We return the log vector that is to be written that cannot + * wholly fit in the iclog. */ static int -xlog_write_setup_copy( +xlog_write_partial( + struct xfs_log_vec *lv, struct xlog_ticket *ticket, - struct xlog_op_header *ophdr, - int space_available, - int space_required, - int *copy_off, - int *copy_len, - int *last_was_partial_copy, - int *bytes_consumed) -{ - int still_to_copy; - - still_to_copy = space_required - *bytes_consumed; - *copy_off = *bytes_consumed; - - if (still_to_copy <= space_available) { - /* write of region completes here */ - *copy_len = still_to_copy; - ophdr->oh_len = cpu_to_be32(*copy_len); - if (*last_was_partial_copy) - ophdr->oh_flags |= (XLOG_END_TRANS|XLOG_WAS_CONT_TRANS); - *last_was_partial_copy = 0; - *bytes_consumed = 0; - return 0; - } + struct xlog_in_core **iclogp, + uint32_t *log_offset, + uint32_t *len, + uint32_t *record_cnt, + uint32_t *data_cnt) +{ + struct xlog_in_core *iclog = *iclogp; + struct xlog_op_header *ophdr; + int index = 0; + uint32_t rlen; + int error; + + /* walk the logvec, copying until we run out of space in the iclog */ + for (index = 0; index < lv->lv_niovecs; index++) { + struct xfs_log_iovec *reg = &lv->lv_iovecp[index]; + uint32_t reg_offset = 0; + + /* + * The first region of a continuation must have a non-zero + * length otherwise log recovery will just skip over it and + * start recovering from the next opheader it finds. Because we + * mark the next opheader as a continuation, recovery will then + * incorrectly add the continuation to the previous region and + * that breaks stuff. + * + * Hence if there isn't space for region data after the + * opheader, then we need to start afresh with a new iclog. + */ + if (iclog->ic_size - *log_offset <= + sizeof(struct xlog_op_header)) { + error = xlog_write_get_more_iclog_space(ticket, + &iclog, log_offset, *len, record_cnt, + data_cnt); + if (error) + return error; + } - /* partial write of region, needs extra log op header reservation */ - *copy_len = space_available; - ophdr->oh_len = cpu_to_be32(*copy_len); - ophdr->oh_flags |= XLOG_CONTINUE_TRANS; - if (*last_was_partial_copy) - ophdr->oh_flags |= XLOG_WAS_CONT_TRANS; - *bytes_consumed += *copy_len; - (*last_was_partial_copy)++; + ophdr = reg->i_addr; + rlen = min_t(uint32_t, reg->i_len, iclog->ic_size - *log_offset); - /* account for new log op header */ - ticket->t_curr_res -= sizeof(struct xlog_op_header); - ticket->t_res_num_ophdrs++; + ophdr->oh_tid = cpu_to_be32(ticket->t_tid); + ophdr->oh_len = cpu_to_be32(rlen - sizeof(struct xlog_op_header)); + if (rlen != reg->i_len) + ophdr->oh_flags |= XLOG_CONTINUE_TRANS; - return sizeof(struct xlog_op_header); -} + xlog_write_iovec(iclog, log_offset, reg->i_addr, + rlen, len, record_cnt, data_cnt); -static int -xlog_write_copy_finish( - struct xlog *log, - struct xlog_in_core *iclog, - uint flags, - int *record_cnt, - int *data_cnt, - int *partial_copy, - int *partial_copy_len, - int log_offset) -{ - int error; + /* If we wrote the whole region, move to the next. */ + if (rlen == reg->i_len) + continue; - if (*partial_copy) { /* - * This iclog has already been marked WANT_SYNC by - * xlog_state_get_iclog_space. + * We now have a partially written iovec, but it can span + * multiple iclogs so we loop here. First we release the iclog + * we currently have, then we get a new iclog and add a new + * opheader. Then we continue copying from where we were until + * we either complete the iovec or fill the iclog. If we + * complete the iovec, then we increment the index and go right + * back to the top of the outer loop. if we fill the iclog, we + * run the inner loop again. + * + * This is complicated by the tail of a region using all the + * space in an iclog and hence requiring us to release the iclog + * and get a new one before returning to the outer loop. We must + * always guarantee that we exit this inner loop with at least + * space for log transaction opheaders left in the current + * iclog, hence we cannot just terminate the loop at the end + * of the of the continuation. So we loop while there is no + * space left in the current iclog, and check for the end of the + * continuation after getting a new iclog. */ - spin_lock(&log->l_icloglock); - xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt); - *record_cnt = 0; - *data_cnt = 0; - goto release_iclog; - } + do { + /* + * Ensure we include the continuation opheader in the + * space we need in the new iclog by adding that size + * to the length we require. This continuation opheader + * needs to be accounted to the ticket as the space it + * consumes hasn't been accounted to the lv we are + * writing. + */ + error = xlog_write_get_more_iclog_space(ticket, + &iclog, log_offset, + *len + sizeof(struct xlog_op_header), + record_cnt, data_cnt); + if (error) + return error; - *partial_copy = 0; - *partial_copy_len = 0; + ophdr = iclog->ic_datap + *log_offset; + ophdr->oh_tid = cpu_to_be32(ticket->t_tid); + ophdr->oh_clientid = XFS_TRANSACTION; + ophdr->oh_res2 = 0; + ophdr->oh_flags = XLOG_WAS_CONT_TRANS; - if (iclog->ic_size - log_offset > sizeof(xlog_op_header_t)) - return 0; + ticket->t_curr_res -= sizeof(struct xlog_op_header); + *log_offset += sizeof(struct xlog_op_header); + *data_cnt += sizeof(struct xlog_op_header); - /* no more space in this iclog - push it. */ - spin_lock(&log->l_icloglock); - xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt); - *record_cnt = 0; - *data_cnt = 0; + /* + * If rlen fits in the iclog, then end the region + * continuation. Otherwise we're going around again. + */ + reg_offset += rlen; + rlen = reg->i_len - reg_offset; + if (rlen <= iclog->ic_size - *log_offset) + ophdr->oh_flags |= XLOG_END_TRANS; + else + ophdr->oh_flags |= XLOG_CONTINUE_TRANS; - if (iclog->ic_state == XLOG_STATE_ACTIVE) - xlog_state_switch_iclogs(log, iclog, 0); - else - ASSERT(iclog->ic_state == XLOG_STATE_WANT_SYNC || - xlog_is_shutdown(log)); -release_iclog: - error = xlog_state_release_iclog(log, iclog, 0); - spin_unlock(&log->l_icloglock); - return error; + rlen = min_t(uint32_t, rlen, iclog->ic_size - *log_offset); + ophdr->oh_len = cpu_to_be32(rlen); + + xlog_write_iovec(iclog, log_offset, + reg->i_addr + reg_offset, + rlen, len, record_cnt, data_cnt); + + } while (ophdr->oh_flags & XLOG_CONTINUE_TRANS); + } + + /* + * No more iovecs remain in this logvec so return the next log vec to + * the caller so it can go back to fast path copying. + */ + *iclogp = iclog; + return 0; } /* @@ -2461,175 +2492,73 @@ int xlog_write( struct xlog *log, struct xfs_cil_ctx *ctx, - struct xfs_log_vec *log_vector, + struct list_head *lv_chain, struct xlog_ticket *ticket, - uint optype) + uint32_t len) + { struct xlog_in_core *iclog = NULL; - struct xfs_log_vec *lv = log_vector; - struct xfs_log_iovec *vecp = lv->lv_iovecp; - int index = 0; - int len; - int partial_copy = 0; - int partial_copy_len = 0; - int contwr = 0; - int record_cnt = 0; - int data_cnt = 0; + struct xfs_log_vec *lv; + uint32_t record_cnt = 0; + uint32_t data_cnt = 0; int error = 0; + int log_offset; - /* - * If this is a commit or unmount transaction, we don't need a start - * record to be written. We do, however, have to account for the - * commit or unmount header that gets written. Hence we always have - * to account for an extra xlog_op_header here. - */ - ticket->t_curr_res -= sizeof(struct xlog_op_header); if (ticket->t_curr_res < 0) { xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES, "ctx ticket reservation ran out. Need to up reservation"); xlog_print_tic_res(log->l_mp, ticket); - xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR); + xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); } - len = xlog_write_calc_vec_length(ticket, log_vector, optype); - while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) { - void *ptr; - int log_offset; - - error = xlog_state_get_iclog_space(log, len, &iclog, ticket, - &contwr, &log_offset); - if (error) - return error; + error = xlog_state_get_iclog_space(log, len, &iclog, ticket, + &log_offset); + if (error) + return error; - ASSERT(log_offset <= iclog->ic_size - 1); - ptr = iclog->ic_datap + log_offset; + ASSERT(log_offset <= iclog->ic_size - 1); - /* - * If we have a context pointer, pass it the first iclog we are - * writing to so it can record state needed for iclog write - * ordering. - */ - if (ctx) { - xlog_cil_set_ctx_write_state(ctx, iclog); - ctx = NULL; - } + /* + * If we have a context pointer, pass it the first iclog we are + * writing to so it can record state needed for iclog write + * ordering. + */ + if (ctx) + xlog_cil_set_ctx_write_state(ctx, iclog); + list_for_each_entry(lv, lv_chain, lv_list) { /* - * This loop writes out as many regions as can fit in the amount - * of space which was allocated by xlog_state_get_iclog_space(). + * If the entire log vec does not fit in the iclog, punt it to + * the partial copy loop which can handle this case. */ - while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) { - struct xfs_log_iovec *reg; - struct xlog_op_header *ophdr; - int copy_len; - int copy_off; - bool ordered = false; - bool wrote_start_rec = false; - - /* ordered log vectors have no regions to write */ - if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED) { - ASSERT(lv->lv_niovecs == 0); - ordered = true; - goto next_lv; - } - - reg = &vecp[index]; - ASSERT(reg->i_len % sizeof(int32_t) == 0); - ASSERT((unsigned long)ptr % sizeof(int32_t) == 0); - - /* - * Before we start formatting log vectors, we need to - * write a start record. Only do this for the first - * iclog we write to. - */ - if (optype & XLOG_START_TRANS) { - xlog_write_start_rec(ptr, ticket); - xlog_write_adv_cnt(&ptr, &len, &log_offset, - sizeof(struct xlog_op_header)); - optype &= ~XLOG_START_TRANS; - wrote_start_rec = true; - } - - ophdr = xlog_write_setup_ophdr(log, ptr, ticket, optype); - if (!ophdr) - return -EIO; - - xlog_write_adv_cnt(&ptr, &len, &log_offset, - sizeof(struct xlog_op_header)); - - len += xlog_write_setup_copy(ticket, ophdr, - iclog->ic_size-log_offset, - reg->i_len, - ©_off, ©_len, - &partial_copy, - &partial_copy_len); - xlog_verify_dest_ptr(log, ptr); - - /* - * Copy region. - * - * Unmount records just log an opheader, so can have - * empty payloads with no data region to copy. Hence we - * only copy the payload if the vector says it has data - * to copy. - */ - ASSERT(copy_len >= 0); - if (copy_len > 0) { - memcpy(ptr, reg->i_addr + copy_off, copy_len); - xlog_write_adv_cnt(&ptr, &len, &log_offset, - copy_len); - } - copy_len += sizeof(struct xlog_op_header); - record_cnt++; - if (wrote_start_rec) { - copy_len += sizeof(struct xlog_op_header); - record_cnt++; - } - data_cnt += contwr ? copy_len : 0; - - error = xlog_write_copy_finish(log, iclog, optype, - &record_cnt, &data_cnt, - &partial_copy, - &partial_copy_len, - log_offset); - if (error) + if (lv->lv_niovecs && + lv->lv_bytes > iclog->ic_size - log_offset) { + error = xlog_write_partial(lv, ticket, &iclog, + &log_offset, &len, &record_cnt, + &data_cnt); + if (error) { + /* + * We have no iclog to release, so just return + * the error immediately. + */ return error; - - /* - * if we had a partial copy, we need to get more iclog - * space but we don't want to increment the region - * index because there is still more is this region to - * write. - * - * If we completed writing this region, and we flushed - * the iclog (indicated by resetting of the record - * count), then we also need to get more log space. If - * this was the last record, though, we are done and - * can just return. - */ - if (partial_copy) - break; - - if (++index == lv->lv_niovecs) { -next_lv: - lv = lv->lv_next; - index = 0; - if (lv) - vecp = lv->lv_iovecp; - } - if (record_cnt == 0 && !ordered) { - if (!lv) - return 0; - break; } + } else { + xlog_write_full(lv, ticket, iclog, &log_offset, + &len, &record_cnt, &data_cnt); } } - ASSERT(len == 0); + /* + * We've already been guaranteed that the last writes will fit inside + * the current iclog, and hence it will already have the space used by + * those writes accounted to it. Hence we do not need to update the + * iclog with the number of bytes written here. + */ spin_lock(&log->l_icloglock); - xlog_state_finish_copy(log, iclog, record_cnt, data_cnt); - error = xlog_state_release_iclog(log, iclog, 0); + xlog_state_finish_copy(log, iclog, record_cnt, 0); + error = xlog_state_release_iclog(log, iclog, ticket); spin_unlock(&log->l_icloglock); return error; @@ -2985,7 +2914,6 @@ xlog_state_get_iclog_space( int len, struct xlog_in_core **iclogp, struct xlog_ticket *ticket, - int *continued_write, int *logoffsetp) { int log_offset; @@ -3022,9 +2950,6 @@ restart: */ if (log_offset == 0) { ticket->t_curr_res -= log->l_iclog_hsize; - xlog_tic_add_region(ticket, - log->l_iclog_hsize, - XLOG_REG_TYPE_LRHEADER); head->h_cycle = cpu_to_be32(log->l_curr_cycle); head->h_lsn = cpu_to_be64( xlog_assign_lsn(log->l_curr_cycle, log->l_curr_block)); @@ -3053,7 +2978,7 @@ restart: * reference to the iclog. */ if (!atomic_add_unless(&iclog->ic_refcnt, -1, 1)) - error = xlog_state_release_iclog(log, iclog, 0); + error = xlog_state_release_iclog(log, iclog, ticket); spin_unlock(&log->l_icloglock); if (error) return error; @@ -3066,13 +2991,10 @@ restart: * iclogs (to mark it taken), this particular iclog will release/sync * to disk in xlog_write(). */ - if (len <= iclog->ic_size - iclog->ic_offset) { - *continued_write = 0; + if (len <= iclog->ic_size - iclog->ic_offset) iclog->ic_offset += len; - } else { - *continued_write = 1; + else xlog_state_switch_iclogs(log, iclog, iclog->ic_size); - } *iclogp = iclog; ASSERT(iclog->ic_offset <= iclog->ic_size); @@ -3104,7 +3026,6 @@ xfs_log_ticket_regrant( xlog_grant_sub_space(log, &log->l_write_head.grant, ticket->t_curr_res); ticket->t_curr_res = ticket->t_unit_res; - xlog_tic_reset_res(ticket); trace_xfs_log_ticket_regrant_sub(log, ticket); @@ -3115,7 +3036,6 @@ xfs_log_ticket_regrant( trace_xfs_log_ticket_regrant_exit(log, ticket); ticket->t_curr_res = ticket->t_unit_res; - xlog_tic_reset_res(ticket); } xfs_log_ticket_put(ticket); @@ -3506,7 +3426,8 @@ xfs_log_ticket_get( static int xlog_calc_unit_res( struct xlog *log, - int unit_bytes) + int unit_bytes, + int *niclogs) { int iclog_space; uint num_headers; @@ -3586,6 +3507,8 @@ xlog_calc_unit_res( /* roundoff padding for transaction data and one for commit record */ unit_bytes += 2 * log->l_iclog_roundoff; + if (niclogs) + *niclogs = num_headers; return unit_bytes; } @@ -3594,7 +3517,7 @@ xfs_log_calc_unit_res( struct xfs_mount *mp, int unit_bytes) { - return xlog_calc_unit_res(mp->m_log, unit_bytes); + return xlog_calc_unit_res(mp->m_log, unit_bytes, NULL); } /* @@ -3605,7 +3528,6 @@ xlog_ticket_alloc( struct xlog *log, int unit_bytes, int cnt, - char client, bool permanent) { struct xlog_ticket *tic; @@ -3613,7 +3535,7 @@ xlog_ticket_alloc( tic = kmem_cache_zalloc(xfs_log_ticket_cache, GFP_NOFS | __GFP_NOFAIL); - unit_res = xlog_calc_unit_res(log, unit_bytes); + unit_res = xlog_calc_unit_res(log, unit_bytes, &tic->t_iclog_hdrs); atomic_set(&tic->t_ref, 1); tic->t_task = current; @@ -3622,41 +3544,15 @@ xlog_ticket_alloc( tic->t_curr_res = unit_res; tic->t_cnt = cnt; tic->t_ocnt = cnt; - tic->t_tid = prandom_u32(); - tic->t_clientid = client; + tic->t_tid = get_random_u32(); if (permanent) tic->t_flags |= XLOG_TIC_PERM_RESERV; - xlog_tic_reset_res(tic); - return tic; } #if defined(DEBUG) /* - * Make sure that the destination ptr is within the valid data region of - * one of the iclogs. This uses backup pointers stored in a different - * part of the log in case we trash the log structure. - */ -STATIC void -xlog_verify_dest_ptr( - struct xlog *log, - void *ptr) -{ - int i; - int good_ptr = 0; - - for (i = 0; i < log->l_iclog_bufs; i++) { - if (ptr >= log->l_iclog_bak[i] && - ptr <= log->l_iclog_bak[i] + log->l_iclog_size) - good_ptr++; - } - - if (!good_ptr) - xfs_emerg(log->l_mp, "%s: invalid ptr", __func__); -} - -/* * Check to make sure the grant write head didn't just over lap the tail. If * the cycles are the same, we can't be overlapping. Otherwise, make sure that * the cycles differ by exactly one and check the byte count. @@ -3783,7 +3679,7 @@ xlog_verify_iclog( if (field_offset & 0x1ff) { clientid = ophead->oh_clientid; } else { - idx = BTOBBT((char *)&ophead->oh_clientid - iclog->ic_datap); + idx = BTOBBT((void *)&ophead->oh_clientid - iclog->ic_datap); if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) { j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE); k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE); @@ -3794,11 +3690,12 @@ xlog_verify_iclog( iclog->ic_header.h_cycle_data[idx]); } } - if (clientid != XFS_TRANSACTION && clientid != XFS_LOG) + if (clientid != XFS_TRANSACTION && clientid != XFS_LOG) { xfs_warn(log->l_mp, - "%s: invalid clientid %d op "PTR_FMT" offset 0x%lx", - __func__, clientid, ophead, + "%s: op %d invalid clientid %d op "PTR_FMT" offset 0x%lx", + __func__, i, clientid, ophead, (unsigned long)field_offset); + } /* check length */ p = &ophead->oh_len; @@ -3806,8 +3703,7 @@ xlog_verify_iclog( if (field_offset & 0x1ff) { op_len = be32_to_cpu(ophead->oh_len); } else { - idx = BTOBBT((uintptr_t)&ophead->oh_len - - (uintptr_t)iclog->ic_datap); + idx = BTOBBT((void *)&ophead->oh_len - iclog->ic_datap); if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) { j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE); k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE); @@ -3822,9 +3718,10 @@ xlog_verify_iclog( #endif /* - * Perform a forced shutdown on the log. This should be called once and once - * only by the high level filesystem shutdown code to shut the log subsystem - * down cleanly. + * Perform a forced shutdown on the log. + * + * This can be called from low level log code to trigger a shutdown, or from the + * high level mount shutdown code when the mount shuts down. * * Our main objectives here are to make sure that: * a. if the shutdown was not due to a log IO error, flush the logs to @@ -3833,6 +3730,8 @@ xlog_verify_iclog( * parties to find out. Nothing new gets queued after this is done. * c. Tasks sleeping on log reservations, pinned objects and * other resources get woken up. + * d. The mount is also marked as shut down so that log triggered shutdowns + * still behave the same as if they called xfs_forced_shutdown(). * * Return true if the shutdown cause was a log IO error and we actually shut the * log down. @@ -3840,29 +3739,29 @@ xlog_verify_iclog( bool xlog_force_shutdown( struct xlog *log, - int shutdown_flags) + uint32_t shutdown_flags) { bool log_error = (shutdown_flags & SHUTDOWN_LOG_IO_ERROR); - /* - * If this happens during log recovery then we aren't using the runtime - * log mechanisms yet so there's nothing to shut down. - */ - if (!log || xlog_in_recovery(log)) + if (!log) return false; - ASSERT(!xlog_is_shutdown(log)); - /* * Flush all the completed transactions to disk before marking the log * being shut down. We need to do this first as shutting down the log * before the force will prevent the log force from flushing the iclogs * to disk. * - * Re-entry due to a log IO error shutdown during the log force is - * prevented by the atomicity of higher level shutdown code. + * When we are in recovery, there are no transactions to flush, and + * we don't want to touch the log because we don't want to perturb the + * current head/tail for future recovery attempts. Hence we need to + * avoid a log force in this case. + * + * If we are shutting down due to a log IO error, then we must avoid + * trying to write the log as that may just result in more IO errors and + * an endless shutdown/force loop. */ - if (!log_error) + if (!log_error && !xlog_in_recovery(log)) xfs_log_force(log->l_mp, XFS_LOG_SYNC); /* @@ -3879,12 +3778,25 @@ xlog_force_shutdown( spin_lock(&log->l_icloglock); if (test_and_set_bit(XLOG_IO_ERROR, &log->l_opstate)) { spin_unlock(&log->l_icloglock); - ASSERT(0); return false; } spin_unlock(&log->l_icloglock); /* + * If this log shutdown also sets the mount shutdown state, issue a + * shutdown warning message. + */ + if (!test_and_set_bit(XFS_OPSTATE_SHUTDOWN, &log->l_mp->m_opstate)) { + xfs_alert_tag(log->l_mp, XFS_PTAG_SHUTDOWN_LOGERROR, +"Filesystem has been shut down due to log error (0x%x).", + shutdown_flags); + xfs_alert(log->l_mp, +"Please unmount the filesystem and rectify the problem(s)."); + if (xfs_error_level >= XFS_ERRLEVEL_HIGH) + xfs_stack_trace(); + } + + /* * We don't want anybody waiting for log reservations after this. That * means we have to wake up everybody queued up on reserveq as well as * writeq. In addition, we make sure in xlog_{re}grant_log_space that @@ -3904,8 +3816,12 @@ xlog_force_shutdown( wake_up_all(&log->l_cilp->xc_start_wait); wake_up_all(&log->l_cilp->xc_commit_wait); spin_unlock(&log->l_cilp->xc_push_lock); + + spin_lock(&log->l_icloglock); xlog_state_shutdown_callbacks(log); + spin_unlock(&log->l_icloglock); + wake_up_var(&log->l_opstate); return log_error; } |