diff options
Diffstat (limited to 'include/asm-arm/arch-s3c2410/entry-macro.S')
| -rw-r--r-- | include/asm-arm/arch-s3c2410/entry-macro.S | 167 |
1 files changed, 67 insertions, 100 deletions
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S index cc06b1bd37b2..894c35cf3b1e 100644 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -6,116 +6,83 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. +*/ + +/* We have a problem that the INTOFFSET register does not always + * show one interrupt. Occasionally we get two interrupts through + * the prioritiser, and this causes the INTOFFSET register to show + * what looks like the logical-or of the two interrupt numbers. + * + * Thanks to Klaus, Shannon, et al for helping to debug this problem +*/ + +#define INTPND (0x10) +#define INTOFFSET (0x14) +#define EXTINTPEND (0xa8) +#define EXTINTMASK (0xa4) - * Modifications: - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - */ #include <asm/hardware.h> #include <asm/arch/irqs.h> - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \tmp, #S3C24XX_VA_IRQ - ldr \irqnr, [ \tmp, #0x14 ] @ get irq no -30000: - teq \irqnr, #4 - teqne \irqnr, #5 - beq 1002f @ external irq reg - - @ debug check to see if interrupt reported is the same - @ as the offset.... - - teq \irqnr, #0 - beq 20002f - ldr \irqstat, [ \tmp, #0x10 ] @ INTPND - mov \irqstat, \irqstat, lsr \irqnr - tst \irqstat, #1 - bne 20002f - - /* debug/warning if we get an invalud response from the - * INTOFFSET register */ -#if 1 - stmfd r13!, { r0 - r4 , r8-r12, r14 } - ldr r1, [ \tmp, #0x14 ] @ INTOFFSET - ldr r2, [ \tmp, #0x10 ] @ INTPND - ldr r3, [ \tmp, #0x00 ] @ SRCPND - adr r0, 20003f - bl printk - b 20004f - -20003: - .ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n" - .byte 0 - .align 4 -20004: - mov r1, #1 - mov \tmp, #S3C24XX_VA_IRQ - ldmfd r13!, { r0 - r4 , r8-r12, r14 } -#endif - - @ try working out interrupt number for ourselves - mov \irqnr, #0 - ldr \irqstat, [ \tmp, #0x10 ] @ INTPND -10021: - movs \irqstat, \irqstat, lsr#1 - bcs 30000b @ try and re-start the proccess - add \irqnr, \irqnr, #1 - cmp \irqnr, #32 - ble 10021b - - @ found no interrupt, set Z flag and leave - movs \irqnr, #0 - b 1001f - -20005: -20002: @ exit - @ we base the s3c2410x interrupts at 16 and above to allow - @ isa peripherals to have their standard interrupts, also - @ ensure that Z flag is un-set on exit - - @ note, we cannot be sure if we get IRQ_EINT0 (0) that - @ there is simply no interrupt pending, so in all other - @ cases we jump to say we have found something, otherwise - @ we check to see if the interrupt really is assrted - adds \irqnr, \irqnr, #IRQ_EINT0 - teq \irqnr, #IRQ_EINT0 - bne 1001f @ exit - ldr \irqstat, [ \tmp, #0x10 ] @ INTPND - teq \irqstat, #0 - moveq \irqnr, #0 - b 1001f - - @ we get here from no main or external interrupts pending -1002: - add \tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ - ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND - ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK - - bic \irqstat, \irqstat, \irqnr @ clear masked irqs - - mov \irqnr, #IRQ_EINT4 @ start extint nos - mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits -10021: - movs \irqstat, \irqstat, lsr#1 - bcs 1004f - add \irqnr, \irqnr, #1 - cmp \irqnr, #IRQ_EINT23 - ble 10021b - - @ found no interrupt, set Z flag and leave - movs \irqnr, #0 - -1004: @ ensure Z flag clear in case our MOVS shifted out the last bit - teq \irqnr, #0 + mov \base, #S3C24XX_VA_IRQ + + ldr \irqstat, [ \base, #INTPND] + bics \irqnr, \irqstat, #3<<4 @@ only an GPIO IRQ + beq 2000f + + @@ try the interrupt offset register, since it is there + + ldr \irqnr, [ \base, #INTOFFSET ] + mov \tmp, #1 + tst \irqstat, \tmp, lsl \irqnr + addne \irqnr, \irqnr, #IRQ_EINT0 + bne 1001f + + @@ the number specified is not a valid irq, so try + @@ and work it out for ourselves + + mov \irqnr, #IRQ_EINT0 @@ start here + b 3000f + +2000: + @@ load the GPIO interrupt register, and check it + + add \tmp, \base, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ + ldr \irqstat, [ \tmp, # EXTINTPEND ] + ldr \irqnr, [ \tmp, # EXTINTMASK ] + bics \irqstat, \irqstat, \irqnr + beq 1001f + + mov \irqnr, #(IRQ_EINT4 - 4) + + @@ work out which irq (if any) we got +3000: + movs \tmp, \irqstat, lsl#16 + addeq \irqnr, \irqnr, #16 + moveq \irqstat, \irqstat, lsr#16 + tst \irqstat, #0xff + addeq \irqnr, \irqnr, #8 + moveq \irqstat, \irqstat, lsr#8 + tst \irqstat, #0xf + addeq \irqnr, \irqnr, #4 + moveq \irqstat, \irqstat, lsr#4 + tst \irqstat, #0x3 + addeq \irqnr, \irqnr, #2 + moveq \irqstat, \irqstat, lsr#2 + tst \irqstat, #0x1 + addeq \irqnr, \irqnr, #1 + + @@ we have the value + movs \irqnr, \irqnr + 1001: - @ exit irq routine - .endm + @@ exit here, Z flag unset if IRQ + .endm /* currently don't need an disable_fiq macro */ .macro disable_fiq .endm - - |