1 files changed, 0 insertions, 148 deletions
diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h
deleted file mode 100644
index 41a5e9d6bb69..000000000000
--- a/include/asm-arm/floppy.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- *  linux/include/asm-arm/floppy.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
- */
-#ifndef __ASM_ARM_FLOPPY_H
-#define __ASM_ARM_FLOPPY_H
-#if 0
-#include <asm/arch/floppy.h>
-#endif
-
-#define fd_outb(val,port)			\
-	do {					\
-		if ((port) == FD_DOR)		\
-			fd_setdor((val));	\
-		else				\
-			outb((val),(port));	\
-	} while(0)
-
-#define fd_inb(port)		inb((port))
-#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
-					    IRQF_DISABLED,"floppy",NULL)
-#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
-#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
-#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
-
-static inline int fd_dma_setup(void *data, unsigned int length,
-			       unsigned int mode, unsigned long addr)
-{
-	set_dma_mode(DMA_FLOPPY, mode);
-	__set_dma_addr(DMA_FLOPPY, data);
-	set_dma_count(DMA_FLOPPY, length);
-	virtual_dma_port = addr;
-	enable_dma(DMA_FLOPPY);
-	return 0;
-}
-#define fd_dma_setup		fd_dma_setup
-
-#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
-#define fd_free_dma()		free_dma(DMA_FLOPPY)
-#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
-
-/* need to clean up dma.h */
-#define DMA_FLOPPYDISK		DMA_FLOPPY
-
-/* Floppy_selects is the list of DOR's to select drive fd
- *
- * On initialisation, the floppy list is scanned, and the drives allocated
- * in the order that they are found.  This is done by seeking the drive
- * to a non-zero track, and then restoring it to track 0.  If an error occurs,
- * then there is no floppy drive present.       [to be put back in again]
- */
-static unsigned char floppy_selects[2][4] =
-{
-	{ 0x10, 0x21, 0x23, 0x33 },
-	{ 0x10, 0x21, 0x23, 0x33 }
-};
-
-#define fd_setdor(dor)								\
-do {										\
-	int new_dor = (dor);							\
-	if (new_dor & 0xf0)							\
-		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
-	else									\
-		new_dor &= 0x0c;						\
-	outb(new_dor, FD_DOR);							\
-} while (0)
-
-/*
- * Someday, we'll automatically detect which drives are present...
- */
-static inline void fd_scandrives (void)
-{
-#if 0
-	int floppy, drive_count;
-
-	fd_disable_irq();
-	raw_cmd = &default_raw_cmd;
-	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
-	raw_cmd->track = 0;
-	raw_cmd->rate = ?;
-	drive_count = 0;
-	for (floppy = 0; floppy < 4; floppy ++) {
-		current_drive = drive_count;
-		/*
-		 * Turn on floppy motor
-		 */
-		if (start_motor(redo_fd_request))
-			continue;
-		/*
-		 * Set up FDC
-		 */
-		fdc_specify();
-		/*
-		 * Tell FDC to recalibrate
-		 */
-		output_byte(FD_RECALIBRATE);
-		LAST_OUT(UNIT(floppy));
-		/* wait for command to complete */
-		if (!successful) {
-			int i;
-			for (i = drive_count; i < 3; i--)
-				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
-			floppy_selects[fdc][3] = 0;
-			floppy -= 1;
-		} else
-			drive_count++;
-	}
-#else
-	floppy_selects[0][0] = 0x10;
-	floppy_selects[0][1] = 0x21;
-	floppy_selects[0][2] = 0x23;
-	floppy_selects[0][3] = 0x33;
-#endif
-}
-
-#define FDC1 (0x3f0)
-
-#define FLOPPY0_TYPE 4
-#define FLOPPY1_TYPE 4
-
-#define N_FDC 1
-#define N_DRIVE 4
-
-#define CROSS_64KB(a,s) (0)
-
-/*
- * This allows people to reverse the order of
- * fd0 and fd1, in case their hardware is
- * strangely connected (as some RiscPCs
- * and A5000s seem to be).
- */
-static void driveswap(int *ints, int dummy, int dummy2)
-{
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-	floppy_selects[0][1] ^= floppy_selects[0][0];
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-}
-
-#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
-	
-#endif