diff options
Diffstat (limited to 'include/asm-cris/uaccess.h')
| -rw-r--r-- | include/asm-cris/uaccess.h | 404 |
1 files changed, 0 insertions, 404 deletions
diff --git a/include/asm-cris/uaccess.h b/include/asm-cris/uaccess.h deleted file mode 100644 index ea11eaf0e922..000000000000 --- a/include/asm-cris/uaccess.h +++ /dev/null @@ -1,404 +0,0 @@ -/* - * Authors: Bjorn Wesen (bjornw@axis.com) - * Hans-Peter Nilsson (hp@axis.com) - */ - -/* Asm:s have been tweaked (within the domain of correctness) to give - satisfactory results for "gcc version 2.96 20000427 (experimental)". - - Check regularly... - - Register $r9 is chosen for temporaries, being a call-clobbered register - first in line to be used (notably for local blocks), not colliding with - parameter registers. */ - -#ifndef _CRIS_UACCESS_H -#define _CRIS_UACCESS_H - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/processor.h> -#include <asm/page.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -/* addr_limit is the maximum accessible address for the task. we misuse - * the KERNEL_DS and USER_DS values to both assign and compare the - * addr_limit values through the equally misnamed get/set_fs macros. - * (see above) - */ - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(TASK_SIZE) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) -#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size))) -#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size))) -#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) - -#include <asm/arch/uaccess.h> - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on - * CRIS, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -extern long __put_user_bad(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x,ptr,retval,"move.b"); break; \ - case 2: __put_user_asm(x,ptr,retval,"move.w"); break; \ - case 4: __put_user_asm(x,ptr,retval,"move.d"); break; \ - case 8: __put_user_asm_64(x,ptr,retval); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __get_user_asm(x,ptr,retval,"move.b"); break; \ - case 2: __get_user_asm(x,ptr,retval,"move.w"); break; \ - case 4: __get_user_asm(x,ptr,retval,"move.d"); break; \ - case 8: __get_user_asm_64(x,ptr,retval); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) *__pu_addr = (ptr); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - - - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size(__gu_val,(ptr),(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT, __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ,__gu_addr,size)) \ - __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -/* More complex functions. Most are inline, but some call functions that - live in lib/usercopy.c */ - -extern unsigned long __copy_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n); -extern unsigned long __do_clear_user(void __user *to, unsigned long n); - -static inline unsigned long -__generic_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_user(to,from,n); - return n; -} - -static inline unsigned long -__generic_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - return __copy_user_zeroing(to,from,n); - return n; -} - -static inline unsigned long -__generic_clear_user(void __user *to, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - return __do_clear_user(to,n); - return n; -} - -static inline long -__strncpy_from_user(char *dst, const char __user *src, long count) -{ - return __do_strncpy_from_user(dst, src, count); -} - -static inline long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - res = __do_strncpy_from_user(dst, src, count); - return res; -} - - -/* Note that these expand awfully if made into switch constructs, so - don't do that. */ - -static inline unsigned long -__constant_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long ret = 0; - if (n == 0) - ; - else if (n == 1) - __asm_copy_from_user_1(to, from, ret); - else if (n == 2) - __asm_copy_from_user_2(to, from, ret); - else if (n == 3) - __asm_copy_from_user_3(to, from, ret); - else if (n == 4) - __asm_copy_from_user_4(to, from, ret); - else if (n == 5) - __asm_copy_from_user_5(to, from, ret); - else if (n == 6) - __asm_copy_from_user_6(to, from, ret); - else if (n == 7) - __asm_copy_from_user_7(to, from, ret); - else if (n == 8) - __asm_copy_from_user_8(to, from, ret); - else if (n == 9) - __asm_copy_from_user_9(to, from, ret); - else if (n == 10) - __asm_copy_from_user_10(to, from, ret); - else if (n == 11) - __asm_copy_from_user_11(to, from, ret); - else if (n == 12) - __asm_copy_from_user_12(to, from, ret); - else if (n == 13) - __asm_copy_from_user_13(to, from, ret); - else if (n == 14) - __asm_copy_from_user_14(to, from, ret); - else if (n == 15) - __asm_copy_from_user_15(to, from, ret); - else if (n == 16) - __asm_copy_from_user_16(to, from, ret); - else if (n == 20) - __asm_copy_from_user_20(to, from, ret); - else if (n == 24) - __asm_copy_from_user_24(to, from, ret); - else - ret = __generic_copy_from_user(to, from, n); - - return ret; -} - -/* Ditto, don't make a switch out of this. */ - -static inline unsigned long -__constant_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long ret = 0; - if (n == 0) - ; - else if (n == 1) - __asm_copy_to_user_1(to, from, ret); - else if (n == 2) - __asm_copy_to_user_2(to, from, ret); - else if (n == 3) - __asm_copy_to_user_3(to, from, ret); - else if (n == 4) - __asm_copy_to_user_4(to, from, ret); - else if (n == 5) - __asm_copy_to_user_5(to, from, ret); - else if (n == 6) - __asm_copy_to_user_6(to, from, ret); - else if (n == 7) - __asm_copy_to_user_7(to, from, ret); - else if (n == 8) - __asm_copy_to_user_8(to, from, ret); - else if (n == 9) - __asm_copy_to_user_9(to, from, ret); - else if (n == 10) - __asm_copy_to_user_10(to, from, ret); - else if (n == 11) - __asm_copy_to_user_11(to, from, ret); - else if (n == 12) - __asm_copy_to_user_12(to, from, ret); - else if (n == 13) - __asm_copy_to_user_13(to, from, ret); - else if (n == 14) - __asm_copy_to_user_14(to, from, ret); - else if (n == 15) - __asm_copy_to_user_15(to, from, ret); - else if (n == 16) - __asm_copy_to_user_16(to, from, ret); - else if (n == 20) - __asm_copy_to_user_20(to, from, ret); - else if (n == 24) - __asm_copy_to_user_24(to, from, ret); - else - ret = __generic_copy_to_user(to, from, n); - - return ret; -} - -/* No switch, please. */ - -static inline unsigned long -__constant_clear_user(void __user *to, unsigned long n) -{ - unsigned long ret = 0; - if (n == 0) - ; - else if (n == 1) - __asm_clear_1(to, ret); - else if (n == 2) - __asm_clear_2(to, ret); - else if (n == 3) - __asm_clear_3(to, ret); - else if (n == 4) - __asm_clear_4(to, ret); - else if (n == 8) - __asm_clear_8(to, ret); - else if (n == 12) - __asm_clear_12(to, ret); - else if (n == 16) - __asm_clear_16(to, ret); - else if (n == 20) - __asm_clear_20(to, ret); - else if (n == 24) - __asm_clear_24(to, ret); - else - ret = __generic_clear_user(to, n); - - return ret; -} - - -#define clear_user(to, n) \ -(__builtin_constant_p(n) ? \ - __constant_clear_user(to, n) : \ - __generic_clear_user(to, n)) - -#define copy_from_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_from_user(to, from, n) : \ - __generic_copy_from_user(to, from, n)) - -#define copy_to_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_to_user(to, from, n) : \ - __generic_copy_to_user(to, from, n)) - -/* We let the __ versions of copy_from/to_user inline, because they're often - * used in fast paths and have only a small space overhead. - */ - -static inline unsigned long -__generic_copy_from_user_nocheck(void *to, const void __user *from, - unsigned long n) -{ - return __copy_user_zeroing(to,from,n); -} - -static inline unsigned long -__generic_copy_to_user_nocheck(void __user *to, const void *from, - unsigned long n) -{ - return __copy_user(to,from,n); -} - -static inline unsigned long -__generic_clear_user_nocheck(void __user *to, unsigned long n) -{ - return __do_clear_user(to,n); -} - -/* without checking */ - -#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n)) -#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n)) -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user -#define __clear_user(to,n) __generic_clear_user_nocheck((to),(n)) - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ - -#endif /* _CRIS_UACCESS_H */ |