diff options
Diffstat (limited to 'include/asm-ppc64/ptrace.h')
-rw-r--r-- | include/asm-ppc64/ptrace.h | 189 |
1 files changed, 0 insertions, 189 deletions
diff --git a/include/asm-ppc64/ptrace.h b/include/asm-ppc64/ptrace.h deleted file mode 100644 index c96aad28fc08..000000000000 --- a/include/asm-ppc64/ptrace.h +++ /dev/null @@ -1,189 +0,0 @@ -#ifndef _PPC64_PTRACE_H -#define _PPC64_PTRACE_H - -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - * - * this should only contain volatile regs - * since we can keep non-volatile in the thread_struct - * should set this up when only volatiles are saved - * by intr code. - * - * Since this is going on the stack, *CARE MUST BE TAKEN* to insure - * that the overall structure is a multiple of 16 bytes in length. - * - * Note that the offsets of the fields in this struct correspond with - * the PT_* values below. This simplifies arch/ppc64/kernel/ptrace.c. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASSEMBLY__ -#define PPC_REG unsigned long -struct pt_regs { - PPC_REG gpr[32]; - PPC_REG nip; - PPC_REG msr; - PPC_REG orig_gpr3; /* Used for restarting system calls */ - PPC_REG ctr; - PPC_REG link; - PPC_REG xer; - PPC_REG ccr; - PPC_REG softe; /* Soft enabled/disabled */ - PPC_REG trap; /* Reason for being here */ - PPC_REG dar; /* Fault registers */ - PPC_REG dsisr; - PPC_REG result; /* Result of a system call */ -}; - -#define PPC_REG_32 unsigned int -struct pt_regs32 { - PPC_REG_32 gpr[32]; - PPC_REG_32 nip; - PPC_REG_32 msr; - PPC_REG_32 orig_gpr3; /* Used for restarting system calls */ - PPC_REG_32 ctr; - PPC_REG_32 link; - PPC_REG_32 xer; - PPC_REG_32 ccr; - PPC_REG_32 mq; /* 601 only (not used at present) */ - /* Used on APUS to hold IPL value. */ - PPC_REG_32 trap; /* Reason for being here */ - PPC_REG_32 dar; /* Fault registers */ - PPC_REG_32 dsisr; - PPC_REG_32 result; /* Result of a system call */ -}; - -#define instruction_pointer(regs) ((regs)->nip) -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - -#endif /* __ASSEMBLY__ */ - -#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ - -/* Size of dummy stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 128 -#define __SIGNAL_FRAMESIZE32 64 - -#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) - -#define force_successful_syscall_return() \ - (current_thread_info()->syscall_noerror = 1) - -/* - * We use the least-significant bit of the trap field to indicate - * whether we have saved the full set of registers, or only a - * partial set. A 1 there means the partial set. - */ -#define FULL_REGS(regs) (((regs)->trap & 1) == 0) -#define TRAP(regs) ((regs)->trap & ~0xF) -#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) - -/* - * Offsets used by 'ptrace' system call interface. - */ -#define PT_R0 0 -#define PT_R1 1 -#define PT_R2 2 -#define PT_R3 3 -#define PT_R4 4 -#define PT_R5 5 -#define PT_R6 6 -#define PT_R7 7 -#define PT_R8 8 -#define PT_R9 9 -#define PT_R10 10 -#define PT_R11 11 -#define PT_R12 12 -#define PT_R13 13 -#define PT_R14 14 -#define PT_R15 15 -#define PT_R16 16 -#define PT_R17 17 -#define PT_R18 18 -#define PT_R19 19 -#define PT_R20 20 -#define PT_R21 21 -#define PT_R22 22 -#define PT_R23 23 -#define PT_R24 24 -#define PT_R25 25 -#define PT_R26 26 -#define PT_R27 27 -#define PT_R28 28 -#define PT_R29 29 -#define PT_R30 30 -#define PT_R31 31 - -#define PT_NIP 32 -#define PT_MSR 33 -#ifdef __KERNEL__ -#define PT_ORIG_R3 34 -#endif -#define PT_CTR 35 -#define PT_LNK 36 -#define PT_XER 37 -#define PT_CCR 38 -#define PT_SOFTE 39 -#define PT_RESULT 43 - -#define PT_FPR0 48 - -/* Kernel and userspace will both use this PT_FPSCR value. 32-bit apps will have - * visibility to the asm-ppc/ptrace.h header instead of this one. - */ -#define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ - -#ifdef __KERNEL__ -#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ -#endif - -#define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ -#define PT_VSCR (PT_VR0 + 32*2 + 1) -#define PT_VRSAVE (PT_VR0 + 33*2) - -#ifdef __KERNEL__ -#define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ -#define PT_VSCR_32 (PT_VR0 + 32*4 + 3) -#define PT_VRSAVE_32 (PT_VR0 + 33*4) -#endif - -/* - * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. - * The transfer totals 34 quadword. Quadwords 0-31 contain the - * corresponding vector registers. Quadword 32 contains the vscr as the - * last word (offset 12) within that quadword. Quadword 33 contains the - * vrsave as the first word (offset 0) within the quadword. - * - * This definition of the VMX state is compatible with the current PPC32 - * ptrace interface. This allows signal handling and ptrace to use the same - * structures. This also simplifies the implementation of a bi-arch - * (combined (32- and 64-bit) gdb. - */ -#define PTRACE_GETVRREGS 18 -#define PTRACE_SETVRREGS 19 - -/* Additional PTRACE requests implemented on PowerPC. */ -#define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ -#define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ -#define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ -#define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ -#define PPC_PTRACE_PEEKTEXT_3264 0x95 /* Read word at location ADDR on a 64-bit process from a 32-bit process. */ -#define PPC_PTRACE_PEEKDATA_3264 0x94 /* Read word at location ADDR on a 64-bit process from a 32-bit process. */ -#define PPC_PTRACE_POKETEXT_3264 0x93 /* Write word at location ADDR on a 64-bit process from a 32-bit process. */ -#define PPC_PTRACE_POKEDATA_3264 0x92 /* Write word at location ADDR on a 64-bit process from a 32-bit process. */ -#define PPC_PTRACE_PEEKUSR_3264 0x91 /* Read a register (specified by ADDR) out of the "user area" on a 64-bit process from a 32-bit process. */ -#define PPC_PTRACE_POKEUSR_3264 0x90 /* Write DATA into location ADDR within the "user area" on a 64-bit process from a 32-bit process. */ - - -#endif /* _PPC64_PTRACE_H */ |