diff options
Diffstat (limited to 'include/asm-sparc/ross.h')
| -rw-r--r-- | include/asm-sparc/ross.h | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/include/asm-sparc/ross.h b/include/asm-sparc/ross.h deleted file mode 100644 index ecb6e81786a6..000000000000 --- a/include/asm-sparc/ross.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * ross.h: Ross module specific definitions and defines. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_ROSS_H -#define _SPARC_ROSS_H - -#include <asm/asi.h> -#include <asm/page.h> - -/* Ross made Hypersparcs have a %psr 'impl' field of '0001'. The 'vers' - * field has '1111'. - */ - -/* The MMU control register fields on the HyperSparc. - * - * ----------------------------------------------------------------- - * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME| - * ----------------------------------------------------------------- - * 31 24 23-22 21 20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 - * - * Phew, lots of fields there ;-) - * - * CWR: Cache Wrapping Enabled, if one cache wrapping is on. - * SE: Snoop Enable, turns on bus snooping for cache activity if one. - * WBE: Write Buffer Enable, one turns it on. - * MID: The ModuleID of the chip for MBus transactions. - * BM: Boot-Mode. One indicates the MMU is in boot mode. - * C: Indicates whether accesses are cachable while the MMU is - * disabled. - * CS: Cache Size -- 0 = 128k, 1 = 256k - * MR: Memory Reflection, one indicates that the memory bus connected - * to the MBus supports memory reflection. - * CM: Cache Mode -- 0 = write-through, 1 = copy-back - * CE: Cache Enable -- 0 = no caching, 1 = cache is on - * NF: No Fault -- 0 = faults trap the CPU from supervisor mode - * 1 = faults from supervisor mode do not generate traps - * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on - */ - -#define HYPERSPARC_CWENABLE 0x00200000 -#define HYPERSPARC_SBENABLE 0x00100000 -#define HYPERSPARC_WBENABLE 0x00080000 -#define HYPERSPARC_MIDMASK 0x00078000 -#define HYPERSPARC_BMODE 0x00004000 -#define HYPERSPARC_ACENABLE 0x00002000 -#define HYPERSPARC_CSIZE 0x00001000 -#define HYPERSPARC_MRFLCT 0x00000800 -#define HYPERSPARC_CMODE 0x00000400 -#define HYPERSPARC_CENABLE 0x00000100 -#define HYPERSPARC_NFAULT 0x00000002 -#define HYPERSPARC_MENABLE 0x00000001 - - -/* The ICCR instruction cache register on the HyperSparc. - * - * ----------------------------------------------- - * | | FTD | ICE | - * ----------------------------------------------- - * 31 1 0 - * - * This register is accessed using the V8 'wrasr' and 'rdasr' - * opcodes, since not all assemblers understand them and those - * that do use different semantics I will just hard code the - * instruction with a '.word' statement. - * - * FTD: If set to one flush instructions executed during an - * instruction cache hit occurs, the corresponding line - * for said cache-hit is invalidated. If FTD is zero, - * an unimplemented 'flush' trap will occur when any - * flush is executed by the processor. - * - * ICE: If set to one, the instruction cache is enabled. If - * zero, the cache will not be used for instruction fetches. - * - * All other bits are read as zeros, and writes to them have no - * effect. - * - * Wheee, not many assemblers understand the %iccr register nor - * the generic asr r/w instructions. - * - * 1000 0011 0100 0111 1100 0000 0000 0000 ! rd %iccr, %g1 - * - * 0x 8 3 4 7 c 0 0 0 ! 0x8347c000 - * - * 1011 1111 1000 0000 0110 0000 0000 0000 ! wr %g1, 0x0, %iccr - * - * 0x b f 8 0 6 0 0 0 ! 0xbf806000 - * - */ - -#define HYPERSPARC_ICCR_FTD 0x00000002 -#define HYPERSPARC_ICCR_ICE 0x00000001 - -#ifndef __ASSEMBLY__ - -static inline unsigned int get_ross_icr(void) -{ - unsigned int icreg; - - __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */ - "mov %%g1, %0\n\t" - : "=r" (icreg) - : /* no inputs */ - : "g1", "memory"); - - return icreg; -} - -static inline void put_ross_icr(unsigned int icreg) -{ - __asm__ __volatile__("or %%g0, %0, %%g1\n\t" - ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */ - "nop\n\t" - "nop\n\t" - "nop\n\t" - : /* no outputs */ - : "r" (icreg) - : "g1", "memory"); - - return; -} - -/* HyperSparc specific cache flushing. */ - -/* This is for the on-chip instruction cache. */ -static inline void hyper_flush_whole_icache(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" - : /* no outputs */ - : "i" (ASI_M_FLUSH_IWHOLE) - : "memory"); - return; -} - -extern int vac_cache_size; -extern int vac_line_size; - -static inline void hyper_clear_all_tags(void) -{ - unsigned long addr; - - for(addr = 0; addr < vac_cache_size; addr += vac_line_size) - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_DATAC_TAG) - : "memory"); -} - -static inline void hyper_flush_unconditional_combined(void) -{ - unsigned long addr; - - for (addr = 0; addr < vac_cache_size; addr += vac_line_size) - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_FLUSH_CTX) - : "memory"); -} - -static inline void hyper_flush_cache_user(void) -{ - unsigned long addr; - - for (addr = 0; addr < vac_cache_size; addr += vac_line_size) - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_FLUSH_USER) - : "memory"); -} - -static inline void hyper_flush_cache_page(unsigned long page) -{ - unsigned long end; - - page &= PAGE_MASK; - end = page + PAGE_SIZE; - while (page < end) { - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (page), "i" (ASI_M_FLUSH_PAGE) - : "memory"); - page += vac_line_size; - } -} - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_ROSS_H) */ |