diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/coreasm.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/coreasm.h | 526 |
1 files changed, 0 insertions, 526 deletions
diff --git a/include/asm-xtensa/xtensa/coreasm.h b/include/asm-xtensa/xtensa/coreasm.h deleted file mode 100644 index a8cfb54c20a1..000000000000 --- a/include/asm-xtensa/xtensa/coreasm.h +++ /dev/null @@ -1,526 +0,0 @@ -#ifndef XTENSA_COREASM_H -#define XTENSA_COREASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/coreasm.h -- assembler-specific - * definitions that depend on CORE configuration. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * It is perfectly normal, however, for the HAL itself to include this - * file. - * - * This file must NOT include xtensa/config/system.h. Any assembler - * header file that depends on system information should likely go in - * a new systemasm.h (or sysasm.h) header file. - * - * NOTE: macro beqi32 is NOT configuration-dependent, and is placed - * here til we will have configuration-independent header file. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/config/core.h> -#include <xtensa/config/specreg.h> - -/* - * Assembly-language specific definitions (assembly macros, etc.). - */ - -/*---------------------------------------------------------------------- - * find_ms_setbit - * - * This macro finds the most significant bit that is set in <as> - * and return its index + <base> in <ad>, or <base> - 1 if <as> is zero. - * The index counts starting at zero for the lsbit, so the return - * value ranges from <base>-1 (no bit set) to <base>+31 (msbit set). - * - * Parameters: - * <ad> destination address register (any register) - * <as> source address register - * <at> temporary address register (must be different than <as>) - * <base> constant value added to result (usually 0 or 1) - * On entry: - * <ad> = undefined if different than <as> - * <as> = value whose most significant set bit is to be found - * <at> = undefined - * no other registers are used by this macro. - * On exit: - * <ad> = <base> + index of msbit set in original <as>, - * = <base> - 1 if original <as> was zero. - * <as> clobbered (if not <ad>) - * <at> clobbered (if not <ad>) - * Example: - * find_ms_setbit a0, a4, a0, 0 -- return in a0 index of msbit set in a4 - */ - - .macro find_ms_setbit ad, as, at, base -#if XCHAL_HAVE_NSA - movi \at, 31+\base - nsau \as, \as // get index of \as, numbered from msbit (32 if absent) - sub \ad, \at, \as // get numbering from lsbit (0..31, -1 if absent) -#else /* XCHAL_HAVE_NSA */ - movi \at, \base // start with result of 0 (point to lsbit of 32) - - beqz \as, 2f // special case for zero argument: return -1 - bltui \as, 0x10000, 1f // is it one of the 16 lsbits? (if so, check lower 16 bits) - addi \at, \at, 16 // no, increment result to upper 16 bits (of 32) - //srli \as, \as, 16 // check upper half (shift right 16 bits) - extui \as, \as, 16, 16 // check upper half (shift right 16 bits) -1: bltui \as, 0x100, 1f // is it one of the 8 lsbits? (if so, check lower 8 bits) - addi \at, \at, 8 // no, increment result to upper 8 bits (of 16) - srli \as, \as, 8 // shift right to check upper 8 bits -1: bltui \as, 0x10, 1f // is it one of the 4 lsbits? (if so, check lower 4 bits) - addi \at, \at, 4 // no, increment result to upper 4 bits (of 8) - srli \as, \as, 4 // shift right 4 bits to check upper half -1: bltui \as, 0x4, 1f // is it one of the 2 lsbits? (if so, check lower 2 bits) - addi \at, \at, 2 // no, increment result to upper 2 bits (of 4) - srli \as, \as, 2 // shift right 2 bits to check upper half -1: bltui \as, 0x2, 1f // is it the lsbit? - addi \at, \at, 2 // no, increment result to upper bit (of 2) -2: addi \at, \at, -1 // (from just above: add 1; from beqz: return -1) - //srli \as, \as, 1 -1: // done! \at contains index of msbit set (or -1 if none set) - .if 0x\ad - 0x\at // destination different than \at ? (works because regs are a0-a15) - mov \ad, \at // then move result to \ad - .endif -#endif /* XCHAL_HAVE_NSA */ - .endm // find_ms_setbit - -/*---------------------------------------------------------------------- - * find_ls_setbit - * - * This macro finds the least significant bit that is set in <as>, - * and return its index in <ad>. - * Usage is the same as for the find_ms_setbit macro. - * Example: - * find_ls_setbit a0, a4, a0, 0 -- return in a0 index of lsbit set in a4 - */ - - .macro find_ls_setbit ad, as, at, base - neg \at, \as // keep only the least-significant bit that is set... - and \as, \at, \as // ... in \as - find_ms_setbit \ad, \as, \at, \base - .endm // find_ls_setbit - -/*---------------------------------------------------------------------- - * find_ls_one - * - * Same as find_ls_setbit with base zero. - * Source (as) and destination (ad) registers must be different. - * Provided for backward compatibility. - */ - - .macro find_ls_one ad, as - find_ls_setbit \ad, \as, \ad, 0 - .endm // find_ls_one - -/*---------------------------------------------------------------------- - * floop, floopnez, floopgtz, floopend - * - * These macros are used for fast inner loops that - * work whether or not the Loops options is configured. - * If the Loops option is configured, they simply use - * the zero-overhead LOOP instructions; otherwise - * they use explicit decrement and branch instructions. - * - * They are used in pairs, with floop, floopnez or floopgtz - * at the beginning of the loop, and floopend at the end. - * - * Each pair of loop macro calls must be given the loop count - * address register and a unique label for that loop. - * - * Example: - * - * movi a3, 16 // loop 16 times - * floop a3, myloop1 - * : - * bnez a7, end1 // exit loop if a7 != 0 - * : - * floopend a3, myloop1 - * end1: - * - * Like the LOOP instructions, these macros cannot be - * nested, must include at least one instruction, - * cannot call functions inside the loop, etc. - * The loop can be exited by jumping to the instruction - * following floopend (or elsewhere outside the loop), - * or continued by jumping to a NOP instruction placed - * immediately before floopend. - * - * Unlike LOOP instructions, the register passed to floop* - * cannot be used inside the loop, because it is used as - * the loop counter if the Loops option is not configured. - * And its value is undefined after exiting the loop. - * And because the loop counter register is active inside - * the loop, you can't easily use this construct to loop - * across a register file using ROTW as you might with LOOP - * instructions, unless you copy the loop register along. - */ - - /* Named label version of the macros: */ - - .macro floop ar, endlabel - floop_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopnez ar, endlabel - floopnez_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopgtz ar, endlabel - floopgtz_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopend ar, endlabel - floopend_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - /* Numbered local label version of the macros: */ -#if 0 /*UNTESTED*/ - .macro floop89 ar - floop_ \ar, 8, 9f - .endm - - .macro floopnez89 ar - floopnez_ \ar, 8, 9f - .endm - - .macro floopgtz89 ar - floopgtz_ \ar, 8, 9f - .endm - - .macro floopend89 ar - floopend_ \ar, 8b, 9 - .endm -#endif /*0*/ - - /* Underlying version of the macros: */ - - .macro floop_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floop cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loop \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floop_ - - .macro floopnez_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floopnez cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loopnez \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ - beqz \ar, \endlabelref -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floopnez_ - - .macro floopgtz_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floopgtz cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loopgtz \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ - bltz \ar, \endlabelref - beqz \ar, \endlabelref -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floopgtz_ - - - .macro floopend_ ar, startlabelref, endlabel - .ifndef _infloop_ - .err // Error: floopend without matching floopXXX - .endif - .ifeq _infloop_ - .err // Error: floopend without matching floopXXX - .endif - .set _infloop_, 0 -#if ! XCHAL_HAVE_LOOPS - bnez \ar, \startlabelref -#endif /* XCHAL_HAVE_LOOPS */ -\endlabel: - .endm // floopend_ - -/*---------------------------------------------------------------------- - * crsil -- conditional RSIL (read/set interrupt level) - * - * Executes the RSIL instruction if it exists, else just reads PS. - * The RSIL instruction does not exist in the new exception architecture - * if the interrupt option is not selected. - */ - - .macro crsil ar, newlevel -#if XCHAL_HAVE_OLD_EXC_ARCH || XCHAL_HAVE_INTERRUPTS - rsil \ar, \newlevel -#else - rsr \ar, PS -#endif - .endm // crsil - -/*---------------------------------------------------------------------- - * window_spill{4,8,12} - * - * These macros spill callers' register windows to the stack. - * They work for both privileged and non-privileged tasks. - * Must be called from a windowed ABI context, eg. within - * a windowed ABI function (ie. valid stack frame, window - * exceptions enabled, not in exception mode, etc). - * - * This macro requires a single invocation of the window_spill_common - * macro in the same assembly unit and section. - * - * Note that using window_spill{4,8,12} macros is more efficient - * than calling a function implemented using window_spill_function, - * because the latter needs extra code to figure out the size of - * the call to the spilling function. - * - * Example usage: - * - * .text - * .align 4 - * .global some_function - * .type some_function,@function - * some_function: - * entry a1, 16 - * : - * : - * - * window_spill4 // spill windows of some_function's callers; preserves a0..a3 only; - * // to use window_spill{8,12} in this example function we'd have - * // to increase space allocated by the entry instruction, because - * // 16 bytes only allows call4; 32 or 48 bytes (+locals) are needed - * // for call8/window_spill8 or call12/window_spill12 respectively. - * : - * - * retw - * - * window_spill_common // instantiates code used by window_spill4 - * - * - * On entry: - * none (if window_spill4) - * stack frame has enough space allocated for call8 (if window_spill8) - * stack frame has enough space allocated for call12 (if window_spill12) - * On exit: - * a4..a15 clobbered (if window_spill4) - * a8..a15 clobbered (if window_spill8) - * a12..a15 clobbered (if window_spill12) - * no caller windows are in live registers - */ - - .macro window_spill4 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call4 .L__wdwspill_assist28 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call4 .L__wdwspill_assist60 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill4 - - .macro window_spill8 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call8 .L__wdwspill_assist24 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call8 .L__wdwspill_assist56 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill8 - - .macro window_spill12 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call12 .L__wdwspill_assist20 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call12 .L__wdwspill_assist52 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill12 - -/*---------------------------------------------------------------------- - * window_spill_function - * - * This macro outputs a function that will spill its caller's callers' - * register windows to the stack. Eg. it could be used to implement - * a version of xthal_window_spill() that works in non-privileged tasks. - * This works for both privileged and non-privileged tasks. - * - * Typical usage: - * - * .text - * .align 4 - * .global my_spill_function - * .type my_spill_function,@function - * my_spill_function: - * window_spill_function - * - * On entry to resulting function: - * none - * On exit from resulting function: - * none (no caller windows are in live registers) - */ - - .macro window_spill_function -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 32 - entry sp, 48 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - call8 .L__wdwspill_assist16 // called with call8, only need another 8 - retw -1: call12 .L__wdwspill_assist16 // called with call4, only need another 12 - retw -2: call4 .L__wdwspill_assist16 // called with call12, only need another 4 - retw -# elif XCHAL_NUM_AREGS == 64 - entry sp, 48 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - call4 .L__wdwspill_assist52 // called with call8, only need a call4 - retw -1: call8 .L__wdwspill_assist52 // called with call4, only need a call8 - retw -2: call12 .L__wdwspill_assist40 // called with call12, can skip a call12 - retw -# elif XCHAL_NUM_AREGS == 16 - entry sp, 16 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - movi a7, 0 // called with call8 - retw -1: movi a11, 0 // called with call4 -2: retw // if called with call12, everything already spilled - -// movi a15, 0 // trick to spill all but the direct caller -// j 1f -// // The entry instruction is magical in the assembler (gets auto-aligned) -// // so we have to jump to it to avoid falling through the padding. -// // We need entry/retw to know where to return. -//1: entry sp, 16 -// retw -# else -# error "unrecognized address register file size" -# endif -#endif /* XCHAL_HAVE_WINDOWED */ - window_spill_common - .endm // window_spill_function - -/*---------------------------------------------------------------------- - * window_spill_common - * - * Common code used by any number of invocations of the window_spill## - * and window_spill_function macros. - * - * Must be instantiated exactly once within a given assembly unit, - * within call/j range of and same section as window_spill## - * macro invocations for that assembly unit. - * (Is automatically instantiated by the window_spill_function macro.) - */ - - .macro window_spill_common -#if XCHAL_HAVE_WINDOWED && (XCHAL_NUM_AREGS == 32 || XCHAL_NUM_AREGS == 64) - .ifndef .L__wdwspill_defined -# if XCHAL_NUM_AREGS >= 64 -.L__wdwspill_assist60: - entry sp, 32 - call8 .L__wdwspill_assist52 - retw -.L__wdwspill_assist56: - entry sp, 16 - call4 .L__wdwspill_assist52 - retw -.L__wdwspill_assist52: - entry sp, 48 - call12 .L__wdwspill_assist40 - retw -.L__wdwspill_assist40: - entry sp, 48 - call12 .L__wdwspill_assist28 - retw -# endif -.L__wdwspill_assist28: - entry sp, 48 - call12 .L__wdwspill_assist16 - retw -.L__wdwspill_assist24: - entry sp, 32 - call8 .L__wdwspill_assist16 - retw -.L__wdwspill_assist20: - entry sp, 16 - call4 .L__wdwspill_assist16 - retw -.L__wdwspill_assist16: - entry sp, 16 - movi a15, 0 - retw - .set .L__wdwspill_defined, 1 - .endif -#endif /* XCHAL_HAVE_WINDOWED with 32 or 64 aregs */ - .endm // window_spill_common - -/*---------------------------------------------------------------------- - * beqi32 - * - * macro implements version of beqi for arbitrary 32-bit immidiate value - * - * beqi32 ax, ay, imm32, label - * - * Compares value in register ax with imm32 value and jumps to label if - * equal. Clobberes register ay if needed - * - */ - .macro beqi32 ax, ay, imm, label - .ifeq ((\imm-1) & ~7) // 1..8 ? - beqi \ax, \imm, \label - .else - .ifeq (\imm+1) // -1 ? - beqi \ax, \imm, \label - .else - .ifeq (\imm) // 0 ? - beqz \ax, \label - .else - // We could also handle immediates 10,12,16,32,64,128,256 - // but it would be a long macro... - movi \ay, \imm - beq \ax, \ay, \label - .endif - .endif - .endif - .endm // beqi32 - -#endif /*XTENSA_COREASM_H*/ - |