diff options
Diffstat (limited to 'include/drm/display')
| -rw-r--r-- | include/drm/display/drm_dp.h | 1693 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_aux_bus.h | 85 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_dual_mode_helper.h | 121 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_helper.h | 766 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_mst_helper.h | 1007 | ||||
| -rw-r--r-- | include/drm/display/drm_dsc.h | 605 | ||||
| -rw-r--r-- | include/drm/display/drm_dsc_helper.h | 20 | ||||
| -rw-r--r-- | include/drm/display/drm_hdcp.h | 298 | ||||
| -rw-r--r-- | include/drm/display/drm_hdcp_helper.h | 22 | ||||
| -rw-r--r-- | include/drm/display/drm_hdmi_helper.h | 27 | ||||
| -rw-r--r-- | include/drm/display/drm_scdc.h | 88 | ||||
| -rw-r--r-- | include/drm/display/drm_scdc_helper.h | 79 |
12 files changed, 4811 insertions, 0 deletions
diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h new file mode 100644 index 000000000000..e934aab357be --- /dev/null +++ b/include/drm/display/drm_dp.h @@ -0,0 +1,1693 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_H_ +#define _DRM_DP_H_ + +#include <linux/types.h> + +/* + * Unless otherwise noted, all values are from the DP 1.1a spec. Note that + * DP and DPCD versions are independent. Differences from 1.0 are not noted, + * 1.0 devices basically don't exist in the wild. + * + * Abbreviations, in chronological order: + * + * eDP: Embedded DisplayPort version 1 + * DPI: DisplayPort Interoperability Guideline v1.1a + * 1.2: DisplayPort 1.2 + * MST: Multistream Transport - part of DP 1.2a + * + * 1.2 formally includes both eDP and DPI definitions. + */ + +/* MSA (Main Stream Attribute) MISC bits (as MISC1<<8|MISC0) */ +#define DP_MSA_MISC_SYNC_CLOCK (1 << 0) +#define DP_MSA_MISC_INTERLACE_VTOTAL_EVEN (1 << 8) +#define DP_MSA_MISC_STEREO_NO_3D (0 << 9) +#define DP_MSA_MISC_STEREO_PROG_RIGHT_EYE (1 << 9) +#define DP_MSA_MISC_STEREO_PROG_LEFT_EYE (3 << 9) +/* bits per component for non-RAW */ +#define DP_MSA_MISC_6_BPC (0 << 5) +#define DP_MSA_MISC_8_BPC (1 << 5) +#define DP_MSA_MISC_10_BPC (2 << 5) +#define DP_MSA_MISC_12_BPC (3 << 5) +#define DP_MSA_MISC_16_BPC (4 << 5) +/* bits per component for RAW */ +#define DP_MSA_MISC_RAW_6_BPC (1 << 5) +#define DP_MSA_MISC_RAW_7_BPC (2 << 5) +#define DP_MSA_MISC_RAW_8_BPC (3 << 5) +#define DP_MSA_MISC_RAW_10_BPC (4 << 5) +#define DP_MSA_MISC_RAW_12_BPC (5 << 5) +#define DP_MSA_MISC_RAW_14_BPC (6 << 5) +#define DP_MSA_MISC_RAW_16_BPC (7 << 5) +/* pixel encoding/colorimetry format */ +#define _DP_MSA_MISC_COLOR(misc1_7, misc0_21, misc0_3, misc0_4) \ + ((misc1_7) << 15 | (misc0_4) << 4 | (misc0_3) << 3 | ((misc0_21) << 1)) +#define DP_MSA_MISC_COLOR_RGB _DP_MSA_MISC_COLOR(0, 0, 0, 0) +#define DP_MSA_MISC_COLOR_CEA_RGB _DP_MSA_MISC_COLOR(0, 0, 1, 0) +#define DP_MSA_MISC_COLOR_RGB_WIDE_FIXED _DP_MSA_MISC_COLOR(0, 3, 0, 0) +#define DP_MSA_MISC_COLOR_RGB_WIDE_FLOAT _DP_MSA_MISC_COLOR(0, 3, 0, 1) +#define DP_MSA_MISC_COLOR_Y_ONLY _DP_MSA_MISC_COLOR(1, 0, 0, 0) +#define DP_MSA_MISC_COLOR_RAW _DP_MSA_MISC_COLOR(1, 1, 0, 0) +#define DP_MSA_MISC_COLOR_YCBCR_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 1, 0) +#define DP_MSA_MISC_COLOR_YCBCR_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 1, 1) +#define DP_MSA_MISC_COLOR_YCBCR_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 1, 0) +#define DP_MSA_MISC_COLOR_YCBCR_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 1, 1) +#define DP_MSA_MISC_COLOR_XVYCC_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 0, 0) +#define DP_MSA_MISC_COLOR_XVYCC_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 0, 1) +#define DP_MSA_MISC_COLOR_XVYCC_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 0, 0) +#define DP_MSA_MISC_COLOR_XVYCC_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 0, 1) +#define DP_MSA_MISC_COLOR_OPRGB _DP_MSA_MISC_COLOR(0, 0, 1, 1) +#define DP_MSA_MISC_COLOR_DCI_P3 _DP_MSA_MISC_COLOR(0, 3, 1, 0) +#define DP_MSA_MISC_COLOR_COLOR_PROFILE _DP_MSA_MISC_COLOR(0, 3, 1, 1) +#define DP_MSA_MISC_COLOR_VSC_SDP (1 << 14) + +#define DP_AUX_MAX_PAYLOAD_BYTES 16 + +#define DP_AUX_I2C_WRITE 0x0 +#define DP_AUX_I2C_READ 0x1 +#define DP_AUX_I2C_WRITE_STATUS_UPDATE 0x2 +#define DP_AUX_I2C_MOT 0x4 +#define DP_AUX_NATIVE_WRITE 0x8 +#define DP_AUX_NATIVE_READ 0x9 + +#define DP_AUX_NATIVE_REPLY_ACK (0x0 << 0) +#define DP_AUX_NATIVE_REPLY_NACK (0x1 << 0) +#define DP_AUX_NATIVE_REPLY_DEFER (0x2 << 0) +#define DP_AUX_NATIVE_REPLY_MASK (0x3 << 0) + +#define DP_AUX_I2C_REPLY_ACK (0x0 << 2) +#define DP_AUX_I2C_REPLY_NACK (0x1 << 2) +#define DP_AUX_I2C_REPLY_DEFER (0x2 << 2) +#define DP_AUX_I2C_REPLY_MASK (0x3 << 2) + +/* DPCD Field Address Mapping */ + +/* Receiver Capability */ +#define DP_DPCD_REV 0x000 +# define DP_DPCD_REV_10 0x10 +# define DP_DPCD_REV_11 0x11 +# define DP_DPCD_REV_12 0x12 +# define DP_DPCD_REV_13 0x13 +# define DP_DPCD_REV_14 0x14 + +#define DP_MAX_LINK_RATE 0x001 + +#define DP_MAX_LANE_COUNT 0x002 +# define DP_MAX_LANE_COUNT_MASK 0x1f +# define DP_TPS3_SUPPORTED (1 << 6) /* 1.2 */ +# define DP_ENHANCED_FRAME_CAP (1 << 7) + +#define DP_MAX_DOWNSPREAD 0x003 +# define DP_MAX_DOWNSPREAD_0_5 (1 << 0) +# define DP_STREAM_REGENERATION_STATUS_CAP (1 << 1) /* 2.0 */ +# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6) +# define DP_TPS4_SUPPORTED (1 << 7) + +#define DP_NORP 0x004 + +#define DP_DOWNSTREAMPORT_PRESENT 0x005 +# define DP_DWN_STRM_PORT_PRESENT (1 << 0) +# define DP_DWN_STRM_PORT_TYPE_MASK 0x06 +# define DP_DWN_STRM_PORT_TYPE_DP (0 << 1) +# define DP_DWN_STRM_PORT_TYPE_ANALOG (1 << 1) +# define DP_DWN_STRM_PORT_TYPE_TMDS (2 << 1) +# define DP_DWN_STRM_PORT_TYPE_OTHER (3 << 1) +# define DP_FORMAT_CONVERSION (1 << 3) +# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) /* DPI */ + +#define DP_MAIN_LINK_CHANNEL_CODING 0x006 +# define DP_CAP_ANSI_8B10B (1 << 0) +# define DP_CAP_ANSI_128B132B (1 << 1) /* 2.0 */ + +#define DP_DOWN_STREAM_PORT_COUNT 0x007 +# define DP_PORT_COUNT_MASK 0x0f +# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */ +# define DP_OUI_SUPPORT (1 << 7) + +#define DP_RECEIVE_PORT_0_CAP_0 0x008 +# define DP_LOCAL_EDID_PRESENT (1 << 1) +# define DP_ASSOCIATED_TO_PRECEDING_PORT (1 << 2) + +#define DP_RECEIVE_PORT_0_BUFFER_SIZE 0x009 + +#define DP_RECEIVE_PORT_1_CAP_0 0x00a +#define DP_RECEIVE_PORT_1_BUFFER_SIZE 0x00b + +#define DP_I2C_SPEED_CAP 0x00c /* DPI */ +# define DP_I2C_SPEED_1K 0x01 +# define DP_I2C_SPEED_5K 0x02 +# define DP_I2C_SPEED_10K 0x04 +# define DP_I2C_SPEED_100K 0x08 +# define DP_I2C_SPEED_400K 0x10 +# define DP_I2C_SPEED_1M 0x20 + +#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */ +# define DP_ALTERNATE_SCRAMBLER_RESET_CAP (1 << 0) +# define DP_FRAMING_CHANGE_CAP (1 << 1) +# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */ + +#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */ +# define DP_TRAINING_AUX_RD_MASK 0x7F /* DP 1.3 */ +# define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7) /* DP 1.3 */ + +#define DP_ADAPTER_CAP 0x00f /* 1.2 */ +# define DP_FORCE_LOAD_SENSE_CAP (1 << 0) +# define DP_ALTERNATE_I2C_PATTERN_CAP (1 << 1) + +#define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */ +# define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */ + +/* Multiple stream transport */ +#define DP_FAUX_CAP 0x020 /* 1.2 */ +# define DP_FAUX_CAP_1 (1 << 0) + +#define DP_SINK_VIDEO_FALLBACK_FORMATS 0x020 /* 2.0 */ +# define DP_FALLBACK_1024x768_60HZ_24BPP (1 << 0) +# define DP_FALLBACK_1280x720_60HZ_24BPP (1 << 1) +# define DP_FALLBACK_1920x1080_60HZ_24BPP (1 << 2) + +#define DP_MSTM_CAP 0x021 /* 1.2 */ +# define DP_MST_CAP (1 << 0) +# define DP_SINGLE_STREAM_SIDEBAND_MSG (1 << 1) /* 2.0 */ + +#define DP_NUMBER_OF_AUDIO_ENDPOINTS 0x022 /* 1.2 */ + +/* AV_SYNC_DATA_BLOCK 1.2 */ +#define DP_AV_GRANULARITY 0x023 +# define DP_AG_FACTOR_MASK (0xf << 0) +# define DP_AG_FACTOR_3MS (0 << 0) +# define DP_AG_FACTOR_2MS (1 << 0) +# define DP_AG_FACTOR_1MS (2 << 0) +# define DP_AG_FACTOR_500US (3 << 0) +# define DP_AG_FACTOR_200US (4 << 0) +# define DP_AG_FACTOR_100US (5 << 0) +# define DP_AG_FACTOR_10US (6 << 0) +# define DP_AG_FACTOR_1US (7 << 0) +# define DP_VG_FACTOR_MASK (0xf << 4) +# define DP_VG_FACTOR_3MS (0 << 4) +# define DP_VG_FACTOR_2MS (1 << 4) +# define DP_VG_FACTOR_1MS (2 << 4) +# define DP_VG_FACTOR_500US (3 << 4) +# define DP_VG_FACTOR_200US (4 << 4) +# define DP_VG_FACTOR_100US (5 << 4) + +#define DP_AUD_DEC_LAT0 0x024 +#define DP_AUD_DEC_LAT1 0x025 + +#define DP_AUD_PP_LAT0 0x026 +#define DP_AUD_PP_LAT1 0x027 + +#define DP_VID_INTER_LAT 0x028 + +#define DP_VID_PROG_LAT 0x029 + +#define DP_REP_LAT 0x02a + +#define DP_AUD_DEL_INS0 0x02b +#define DP_AUD_DEL_INS1 0x02c +#define DP_AUD_DEL_INS2 0x02d +/* End of AV_SYNC_DATA_BLOCK */ + +#define DP_RECEIVER_ALPM_CAP 0x02e /* eDP 1.4 */ +# define DP_ALPM_CAP (1 << 0) + +#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP 0x02f /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_CAP (1 << 0) + +#define DP_GUID 0x030 /* 1.2 */ + +#define DP_DSC_SUPPORT 0x060 /* DP 1.4 */ +# define DP_DSC_DECOMPRESSION_IS_SUPPORTED (1 << 0) +# define DP_DSC_PASSTHROUGH_IS_SUPPORTED (1 << 1) + +#define DP_DSC_REV 0x061 +# define DP_DSC_MAJOR_MASK (0xf << 0) +# define DP_DSC_MINOR_MASK (0xf << 4) +# define DP_DSC_MAJOR_SHIFT 0 +# define DP_DSC_MINOR_SHIFT 4 + +#define DP_DSC_RC_BUF_BLK_SIZE 0x062 +# define DP_DSC_RC_BUF_BLK_SIZE_1 0x0 +# define DP_DSC_RC_BUF_BLK_SIZE_4 0x1 +# define DP_DSC_RC_BUF_BLK_SIZE_16 0x2 +# define DP_DSC_RC_BUF_BLK_SIZE_64 0x3 + +#define DP_DSC_RC_BUF_SIZE 0x063 + +#define DP_DSC_SLICE_CAP_1 0x064 +# define DP_DSC_1_PER_DP_DSC_SINK (1 << 0) +# define DP_DSC_2_PER_DP_DSC_SINK (1 << 1) +# define DP_DSC_4_PER_DP_DSC_SINK (1 << 3) +# define DP_DSC_6_PER_DP_DSC_SINK (1 << 4) +# define DP_DSC_8_PER_DP_DSC_SINK (1 << 5) +# define DP_DSC_10_PER_DP_DSC_SINK (1 << 6) +# define DP_DSC_12_PER_DP_DSC_SINK (1 << 7) + +#define DP_DSC_LINE_BUF_BIT_DEPTH 0x065 +# define DP_DSC_LINE_BUF_BIT_DEPTH_MASK (0xf << 0) +# define DP_DSC_LINE_BUF_BIT_DEPTH_9 0x0 +# define DP_DSC_LINE_BUF_BIT_DEPTH_10 0x1 +# define DP_DSC_LINE_BUF_BIT_DEPTH_11 0x2 +# define DP_DSC_LINE_BUF_BIT_DEPTH_12 0x3 +# define DP_DSC_LINE_BUF_BIT_DEPTH_13 0x4 +# define DP_DSC_LINE_BUF_BIT_DEPTH_14 0x5 +# define DP_DSC_LINE_BUF_BIT_DEPTH_15 0x6 +# define DP_DSC_LINE_BUF_BIT_DEPTH_16 0x7 +# define DP_DSC_LINE_BUF_BIT_DEPTH_8 0x8 + +#define DP_DSC_BLK_PREDICTION_SUPPORT 0x066 +# define DP_DSC_BLK_PREDICTION_IS_SUPPORTED (1 << 0) + +#define DP_DSC_MAX_BITS_PER_PIXEL_LOW 0x067 /* eDP 1.4 */ + +#define DP_DSC_MAX_BITS_PER_PIXEL_HI 0x068 /* eDP 1.4 */ +# define DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK (0x3 << 0) +# define DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT 8 + +#define DP_DSC_DEC_COLOR_FORMAT_CAP 0x069 +# define DP_DSC_RGB (1 << 0) +# define DP_DSC_YCbCr444 (1 << 1) +# define DP_DSC_YCbCr422_Simple (1 << 2) +# define DP_DSC_YCbCr422_Native (1 << 3) +# define DP_DSC_YCbCr420_Native (1 << 4) + +#define DP_DSC_DEC_COLOR_DEPTH_CAP 0x06A +# define DP_DSC_8_BPC (1 << 1) +# define DP_DSC_10_BPC (1 << 2) +# define DP_DSC_12_BPC (1 << 3) + +#define DP_DSC_PEAK_THROUGHPUT 0x06B +# define DP_DSC_THROUGHPUT_MODE_0_MASK (0xf << 0) +# define DP_DSC_THROUGHPUT_MODE_0_SHIFT 0 +# define DP_DSC_THROUGHPUT_MODE_0_UNSUPPORTED 0 +# define DP_DSC_THROUGHPUT_MODE_0_340 (1 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_400 (2 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_450 (3 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_500 (4 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_550 (5 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_600 (6 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_650 (7 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_700 (8 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_750 (9 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_800 (10 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_850 (11 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_900 (12 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_950 (13 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_1000 (14 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_170 (15 << 0) /* 1.4a */ +# define DP_DSC_THROUGHPUT_MODE_1_MASK (0xf << 4) +# define DP_DSC_THROUGHPUT_MODE_1_SHIFT 4 +# define DP_DSC_THROUGHPUT_MODE_1_UNSUPPORTED 0 +# define DP_DSC_THROUGHPUT_MODE_1_340 (1 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_400 (2 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_450 (3 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_500 (4 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_550 (5 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_600 (6 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_650 (7 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_700 (8 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_750 (9 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_800 (10 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_850 (11 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_900 (12 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_950 (13 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_1000 (14 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_170 (15 << 4) + +#define DP_DSC_MAX_SLICE_WIDTH 0x06C +#define DP_DSC_MIN_SLICE_WIDTH_VALUE 2560 +#define DP_DSC_SLICE_WIDTH_MULTIPLIER 320 + +#define DP_DSC_SLICE_CAP_2 0x06D +# define DP_DSC_16_PER_DP_DSC_SINK (1 << 0) +# define DP_DSC_20_PER_DP_DSC_SINK (1 << 1) +# define DP_DSC_24_PER_DP_DSC_SINK (1 << 2) + +#define DP_DSC_BITS_PER_PIXEL_INC 0x06F +# define DP_DSC_BITS_PER_PIXEL_1_16 0x0 +# define DP_DSC_BITS_PER_PIXEL_1_8 0x1 +# define DP_DSC_BITS_PER_PIXEL_1_4 0x2 +# define DP_DSC_BITS_PER_PIXEL_1_2 0x3 +# define DP_DSC_BITS_PER_PIXEL_1 0x4 + +#define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ +# define DP_PSR_IS_SUPPORTED 1 +# define DP_PSR2_IS_SUPPORTED 2 /* eDP 1.4 */ +# define DP_PSR2_WITH_Y_COORD_IS_SUPPORTED 3 /* eDP 1.4a */ +# define DP_PSR2_WITH_Y_COORD_ET_SUPPORTED 4 /* eDP 1.5, adopted eDP 1.4b SCR */ + +#define DP_PSR_CAPS 0x071 /* XXX 1.2? */ +# define DP_PSR_NO_TRAIN_ON_EXIT 1 +# define DP_PSR_SETUP_TIME_330 (0 << 1) +# define DP_PSR_SETUP_TIME_275 (1 << 1) +# define DP_PSR_SETUP_TIME_220 (2 << 1) +# define DP_PSR_SETUP_TIME_165 (3 << 1) +# define DP_PSR_SETUP_TIME_110 (4 << 1) +# define DP_PSR_SETUP_TIME_55 (5 << 1) +# define DP_PSR_SETUP_TIME_0 (6 << 1) +# define DP_PSR_SETUP_TIME_MASK (7 << 1) +# define DP_PSR_SETUP_TIME_SHIFT 1 +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4) /* eDP 1.4a */ +# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5) /* eDP 1.4b */ +# define DP_PSR2_SU_AUX_FRAME_SYNC_NOT_NEEDED (1 << 6)/* eDP 1.5, adopted eDP 1.4b SCR */ + +#define DP_PSR2_SU_X_GRANULARITY 0x072 /* eDP 1.4b */ +#define DP_PSR2_SU_Y_GRANULARITY 0x074 /* eDP 1.4b */ + +/* + * 0x80-0x8f describe downstream port capabilities, but there are two layouts + * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, + * each port's descriptor is one byte wide. If it was set, each port's is + * four bytes wide, starting with the one byte from the base info. As of + * DP interop v1.1a only VGA defines additional detail. + */ + +/* offset 0 */ +#define DP_DOWNSTREAM_PORT_0 0x80 +# define DP_DS_PORT_TYPE_MASK (7 << 0) +# define DP_DS_PORT_TYPE_DP 0 +# define DP_DS_PORT_TYPE_VGA 1 +# define DP_DS_PORT_TYPE_DVI 2 +# define DP_DS_PORT_TYPE_HDMI 3 +# define DP_DS_PORT_TYPE_NON_EDID 4 +# define DP_DS_PORT_TYPE_DP_DUALMODE 5 +# define DP_DS_PORT_TYPE_WIRELESS 6 +# define DP_DS_PORT_HPD (1 << 3) +# define DP_DS_NON_EDID_MASK (0xf << 4) +# define DP_DS_NON_EDID_720x480i_60 (1 << 4) +# define DP_DS_NON_EDID_720x480i_50 (2 << 4) +# define DP_DS_NON_EDID_1920x1080i_60 (3 << 4) +# define DP_DS_NON_EDID_1920x1080i_50 (4 << 4) +# define DP_DS_NON_EDID_1280x720_60 (5 << 4) +# define DP_DS_NON_EDID_1280x720_50 (7 << 4) +/* offset 1 for VGA is maximum megapixels per second / 8 */ +/* offset 1 for DVI/HDMI is maximum TMDS clock in Mbps / 2.5 */ +/* offset 2 for VGA/DVI/HDMI */ +# define DP_DS_MAX_BPC_MASK (3 << 0) +# define DP_DS_8BPC 0 +# define DP_DS_10BPC 1 +# define DP_DS_12BPC 2 +# define DP_DS_16BPC 3 +/* HDMI2.1 PCON FRL CONFIGURATION */ +# define DP_PCON_MAX_FRL_BW (7 << 2) +# define DP_PCON_MAX_0GBPS (0 << 2) +# define DP_PCON_MAX_9GBPS (1 << 2) +# define DP_PCON_MAX_18GBPS (2 << 2) +# define DP_PCON_MAX_24GBPS (3 << 2) +# define DP_PCON_MAX_32GBPS (4 << 2) +# define DP_PCON_MAX_40GBPS (5 << 2) +# define DP_PCON_MAX_48GBPS (6 << 2) +# define DP_PCON_SOURCE_CTL_MODE (1 << 5) + +/* offset 3 for DVI */ +# define DP_DS_DVI_DUAL_LINK (1 << 1) +# define DP_DS_DVI_HIGH_COLOR_DEPTH (1 << 2) +/* offset 3 for HDMI */ +# define DP_DS_HDMI_FRAME_SEQ_TO_FRAME_PACK (1 << 0) +# define DP_DS_HDMI_YCBCR422_PASS_THROUGH (1 << 1) +# define DP_DS_HDMI_YCBCR420_PASS_THROUGH (1 << 2) +# define DP_DS_HDMI_YCBCR444_TO_422_CONV (1 << 3) +# define DP_DS_HDMI_YCBCR444_TO_420_CONV (1 << 4) + +/* + * VESA DP-to-HDMI PCON Specification adds caps for colorspace + * conversion in DFP cap DPCD 83h. Sec6.1 Table-3. + * Based on the available support the source can enable + * color conversion by writing into PROTOCOL_COVERTER_CONTROL_2 + * DPCD 3052h. + */ +# define DP_DS_HDMI_BT601_RGB_YCBCR_CONV (1 << 5) +# define DP_DS_HDMI_BT709_RGB_YCBCR_CONV (1 << 6) +# define DP_DS_HDMI_BT2020_RGB_YCBCR_CONV (1 << 7) + +#define DP_MAX_DOWNSTREAM_PORTS 0x10 + +/* DP Forward error Correction Registers */ +#define DP_FEC_CAPABILITY 0x090 /* 1.4 */ +# define DP_FEC_CAPABLE (1 << 0) +# define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP (1 << 1) +# define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2) +# define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3) +#define DP_FEC_CAPABILITY_1 0x091 /* 2.0 */ + +/* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */ +#define DP_PCON_DSC_ENCODER_CAP_SIZE 0xD /* 0x92 through 0x9E */ +#define DP_PCON_DSC_ENCODER 0x092 +# define DP_PCON_DSC_ENCODER_SUPPORTED (1 << 0) +# define DP_PCON_DSC_PPS_ENC_OVERRIDE (1 << 1) + +/* DP-HDMI2.1 PCON DSC Version */ +#define DP_PCON_DSC_VERSION 0x093 +# define DP_PCON_DSC_MAJOR_MASK (0xF << 0) +# define DP_PCON_DSC_MINOR_MASK (0xF << 4) +# define DP_PCON_DSC_MAJOR_SHIFT 0 +# define DP_PCON_DSC_MINOR_SHIFT 4 + +/* DP-HDMI2.1 PCON DSC RC Buffer block size */ +#define DP_PCON_DSC_RC_BUF_BLK_INFO 0x094 +# define DP_PCON_DSC_RC_BUF_BLK_SIZE (0x3 << 0) +# define DP_PCON_DSC_RC_BUF_BLK_1KB 0 +# define DP_PCON_DSC_RC_BUF_BLK_4KB 1 +# define DP_PCON_DSC_RC_BUF_BLK_16KB 2 +# define DP_PCON_DSC_RC_BUF_BLK_64KB 3 + +/* DP-HDMI2.1 PCON DSC RC Buffer size */ +#define DP_PCON_DSC_RC_BUF_SIZE 0x095 + +/* DP-HDMI2.1 PCON DSC Slice capabilities-1 */ +#define DP_PCON_DSC_SLICE_CAP_1 0x096 +# define DP_PCON_DSC_1_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_2_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_4_PER_DSC_ENC (0x1 << 3) +# define DP_PCON_DSC_6_PER_DSC_ENC (0x1 << 4) +# define DP_PCON_DSC_8_PER_DSC_ENC (0x1 << 5) +# define DP_PCON_DSC_10_PER_DSC_ENC (0x1 << 6) +# define DP_PCON_DSC_12_PER_DSC_ENC (0x1 << 7) + +#define DP_PCON_DSC_BUF_BIT_DEPTH 0x097 +# define DP_PCON_DSC_BIT_DEPTH_MASK (0xF << 0) +# define DP_PCON_DSC_DEPTH_9_BITS 0 +# define DP_PCON_DSC_DEPTH_10_BITS 1 +# define DP_PCON_DSC_DEPTH_11_BITS 2 +# define DP_PCON_DSC_DEPTH_12_BITS 3 +# define DP_PCON_DSC_DEPTH_13_BITS 4 +# define DP_PCON_DSC_DEPTH_14_BITS 5 +# define DP_PCON_DSC_DEPTH_15_BITS 6 +# define DP_PCON_DSC_DEPTH_16_BITS 7 +# define DP_PCON_DSC_DEPTH_8_BITS 8 + +#define DP_PCON_DSC_BLOCK_PREDICTION 0x098 +# define DP_PCON_DSC_BLOCK_PRED_SUPPORT (0x1 << 0) + +#define DP_PCON_DSC_ENC_COLOR_FMT_CAP 0x099 +# define DP_PCON_DSC_ENC_RGB (0x1 << 0) +# define DP_PCON_DSC_ENC_YUV444 (0x1 << 1) +# define DP_PCON_DSC_ENC_YUV422_S (0x1 << 2) +# define DP_PCON_DSC_ENC_YUV422_N (0x1 << 3) +# define DP_PCON_DSC_ENC_YUV420_N (0x1 << 4) + +#define DP_PCON_DSC_ENC_COLOR_DEPTH_CAP 0x09A +# define DP_PCON_DSC_ENC_8BPC (0x1 << 1) +# define DP_PCON_DSC_ENC_10BPC (0x1 << 2) +# define DP_PCON_DSC_ENC_12BPC (0x1 << 3) + +#define DP_PCON_DSC_MAX_SLICE_WIDTH 0x09B + +/* DP-HDMI2.1 PCON DSC Slice capabilities-2 */ +#define DP_PCON_DSC_SLICE_CAP_2 0x09C +# define DP_PCON_DSC_16_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_20_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_24_PER_DSC_ENC (0x1 << 2) + +/* DP-HDMI2.1 PCON HDMI TX Encoder Bits/pixel increment */ +#define DP_PCON_DSC_BPP_INCR 0x09E +# define DP_PCON_DSC_BPP_INCR_MASK (0x7 << 0) +# define DP_PCON_DSC_ONE_16TH_BPP 0 +# define DP_PCON_DSC_ONE_8TH_BPP 1 +# define DP_PCON_DSC_ONE_4TH_BPP 2 +# define DP_PCON_DSC_ONE_HALF_BPP 3 +# define DP_PCON_DSC_ONE_BPP 4 + +/* DP Extended DSC Capabilities */ +#define DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 0x0a0 /* DP 1.4a SCR */ +#define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1 +#define DP_DSC_BRANCH_MAX_LINE_WIDTH 0x0a2 + +/* DFP Capability Extension */ +#define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0a3 /* 2.0 */ + +/* Link Configuration */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_RATE_TABLE 0x00 /* eDP 1.4 */ +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a +# define DP_LINK_BW_5_4 0x14 /* 1.2 */ +# define DP_LINK_BW_8_1 0x1e /* 1.4 */ +# define DP_LINK_BW_10 0x01 /* 2.0 128b/132b Link Layer */ +# define DP_LINK_BW_13_5 0x04 /* 2.0 128b/132b Link Layer */ +# define DP_LINK_BW_20 0x02 /* 2.0 128b/132b Link Layer */ + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_2_CDS 3 /* 2.0 E11 */ +# define DP_TRAINING_PATTERN_3 3 /* 1.2 */ +# define DP_TRAINING_PATTERN_4 7 /* 1.4 */ +# define DP_TRAINING_PATTERN_MASK 0x3 +# define DP_TRAINING_PATTERN_MASK_1_4 0xf + +/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */ +# define DP_LINK_QUAL_PATTERN_11_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_11_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_11_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_11_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_0 (0 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_1 (1 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_2 (2 << 3) +# define DP_TRAIN_PRE_EMPH_LEVEL_3 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +# define DP_TX_FFE_PRESET_VALUE_MASK (0xf << 0) /* 2.0 128b/132b Link Layer */ + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) +# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) /* eDP */ + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) +# define DP_SET_ANSI_128B132B (1 << 1) + +#define DP_I2C_SPEED_CONTROL_STATUS 0x109 /* DPI */ +/* bitmask as for DP_I2C_SPEED_CAP */ + +#define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */ +# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0) +# define DP_FRAMING_CHANGE_ENABLE (1 << 1) +# define DP_PANEL_SELF_TEST_ENABLE (1 << 7) + +#define DP_LINK_QUAL_LANE0_SET 0x10b /* DPCD >= 1.2 */ +#define DP_LINK_QUAL_LANE1_SET 0x10c +#define DP_LINK_QUAL_LANE2_SET 0x10d +#define DP_LINK_QUAL_LANE3_SET 0x10e +# define DP_LINK_QUAL_PATTERN_DISABLE 0 +# define DP_LINK_QUAL_PATTERN_D10_2 1 +# define DP_LINK_QUAL_PATTERN_ERROR_RATE 2 +# define DP_LINK_QUAL_PATTERN_PRBS7 3 +# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM 4 +# define DP_LINK_QUAL_PATTERN_CP2520_PAT_1 5 +# define DP_LINK_QUAL_PATTERN_CP2520_PAT_2 6 +# define DP_LINK_QUAL_PATTERN_CP2520_PAT_3 7 +/* DP 2.0 UHBR10, UHBR13.5, UHBR20 */ +# define DP_LINK_QUAL_PATTERN_128B132B_TPS1 0x08 +# define DP_LINK_QUAL_PATTERN_128B132B_TPS2 0x10 +# define DP_LINK_QUAL_PATTERN_PRSBS9 0x18 +# define DP_LINK_QUAL_PATTERN_PRSBS11 0x20 +# define DP_LINK_QUAL_PATTERN_PRSBS15 0x28 +# define DP_LINK_QUAL_PATTERN_PRSBS23 0x30 +# define DP_LINK_QUAL_PATTERN_PRSBS31 0x38 +# define DP_LINK_QUAL_PATTERN_CUSTOM 0x40 +# define DP_LINK_QUAL_PATTERN_SQUARE 0x48 + +#define DP_TRAINING_LANE0_1_SET2 0x10f +#define DP_TRAINING_LANE2_3_SET2 0x110 +# define DP_LANE02_POST_CURSOR2_SET_MASK (3 << 0) +# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2) +# define DP_LANE13_POST_CURSOR2_SET_MASK (3 << 4) +# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6) + +#define DP_MSTM_CTRL 0x111 /* 1.2 */ +# define DP_MST_EN (1 << 0) +# define DP_UP_REQ_EN (1 << 1) +# define DP_UPSTREAM_IS_SRC (1 << 2) + +#define DP_AUDIO_DELAY0 0x112 /* 1.2 */ +#define DP_AUDIO_DELAY1 0x113 +#define DP_AUDIO_DELAY2 0x114 + +#define DP_LINK_RATE_SET 0x115 /* eDP 1.4 */ +# define DP_LINK_RATE_SET_SHIFT 0 +# define DP_LINK_RATE_SET_MASK (7 << 0) + +#define DP_RECEIVER_ALPM_CONFIG 0x116 /* eDP 1.4 */ +# define DP_ALPM_ENABLE (1 << 0) +# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE (1 << 1) + +#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF 0x117 /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_ENABLE (1 << 0) +# define DP_IRQ_HPD_ENABLE (1 << 1) + +#define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */ +# define DP_PWR_NOT_NEEDED (1 << 0) + +#define DP_FEC_CONFIGURATION 0x120 /* 1.4 */ +# define DP_FEC_READY (1 << 0) +# define DP_FEC_ERR_COUNT_SEL_MASK (7 << 1) +# define DP_FEC_ERR_COUNT_DIS (0 << 1) +# define DP_FEC_UNCORR_BLK_ERROR_COUNT (1 << 1) +# define DP_FEC_CORR_BLK_ERROR_COUNT (2 << 1) +# define DP_FEC_BIT_ERROR_COUNT (3 << 1) +# define DP_FEC_LANE_SELECT_MASK (3 << 4) +# define DP_FEC_LANE_0_SELECT (0 << 4) +# define DP_FEC_LANE_1_SELECT (1 << 4) +# define DP_FEC_LANE_2_SELECT (2 << 4) +# define DP_FEC_LANE_3_SELECT (3 << 4) + +#define DP_AUX_FRAME_SYNC_VALUE 0x15c /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_VALID (1 << 0) + +#define DP_DSC_ENABLE 0x160 /* DP 1.4 */ +# define DP_DECOMPRESSION_EN (1 << 0) +#define DP_DSC_CONFIGURATION 0x161 /* DP 2.0 */ + +#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */ +# define DP_PSR_ENABLE BIT(0) +# define DP_PSR_MAIN_LINK_ACTIVE BIT(1) +# define DP_PSR_CRC_VERIFICATION BIT(2) +# define DP_PSR_FRAME_CAPTURE BIT(3) +# define DP_PSR_SU_REGION_SCANLINE_CAPTURE BIT(4) /* eDP 1.4a */ +# define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS BIT(5) /* eDP 1.4a */ +# define DP_PSR_ENABLE_PSR2 BIT(6) /* eDP 1.4a */ + +#define DP_ADAPTER_CTRL 0x1a0 +# define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0) + +#define DP_BRANCH_DEVICE_CTRL 0x1a1 +# define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0) + +#define DP_PAYLOAD_ALLOCATE_SET 0x1c0 +#define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1 +#define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2 + +/* Link/Sink Device Status */ +#define DP_SINK_COUNT 0x200 +/* prior to 1.2 bit 7 was reserved mbz */ +# define DP_GET_SINK_COUNT(x) ((((x) & 0x80) >> 1) | ((x) & 0x3f)) +# define DP_SINK_CP_READY (1 << 6) + +#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201 +# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0) +# define DP_AUTOMATED_TEST_REQUEST (1 << 1) +# define DP_CP_IRQ (1 << 2) +# define DP_MCCS_IRQ (1 << 3) +# define DP_DOWN_REP_MSG_RDY (1 << 4) /* 1.2 MST */ +# define DP_UP_REQ_MSG_RDY (1 << 5) /* 1.2 MST */ +# define DP_SINK_SPECIFIC_IRQ (1 << 6) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ + DP_LANE_CHANNEL_EQ_DONE | \ + DP_LANE_SYMBOL_LOCKED) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_128B132B_DPRX_EQ_INTERLANE_ALIGN_DONE (1 << 2) /* 2.0 E11 */ +#define DP_128B132B_DPRX_CDS_INTERLANE_ALIGN_DONE (1 << 3) /* 2.0 E11 */ +#define DP_128B132B_LT_FAILED (1 << 4) /* 2.0 E11 */ +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 +# define DP_RECEIVE_PORT_0_STATUS (1 << 0) +# define DP_RECEIVE_PORT_1_STATUS (1 << 1) +# define DP_STREAM_REGENERATION_STATUS (1 << 2) /* 2.0 */ +# define DP_INTRA_HOP_AUX_REPLY_INDICATION (1 << 3) /* 2.0 */ + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +/* DP 2.0 128b/132b Link Layer */ +# define DP_ADJUST_TX_FFE_PRESET_LANE0_MASK (0xf << 0) +# define DP_ADJUST_TX_FFE_PRESET_LANE0_SHIFT 0 +# define DP_ADJUST_TX_FFE_PRESET_LANE1_MASK (0xf << 4) +# define DP_ADJUST_TX_FFE_PRESET_LANE1_SHIFT 4 + +#define DP_ADJUST_REQUEST_POST_CURSOR2 0x20c +# define DP_ADJUST_POST_CURSOR2_LANE0_MASK 0x03 +# define DP_ADJUST_POST_CURSOR2_LANE0_SHIFT 0 +# define DP_ADJUST_POST_CURSOR2_LANE1_MASK 0x0c +# define DP_ADJUST_POST_CURSOR2_LANE1_SHIFT 2 +# define DP_ADJUST_POST_CURSOR2_LANE2_MASK 0x30 +# define DP_ADJUST_POST_CURSOR2_LANE2_SHIFT 4 +# define DP_ADJUST_POST_CURSOR2_LANE3_MASK 0xc0 +# define DP_ADJUST_POST_CURSOR2_LANE3_SHIFT 6 + +#define DP_TEST_REQUEST 0x218 +# define DP_TEST_LINK_TRAINING (1 << 0) +# define DP_TEST_LINK_VIDEO_PATTERN (1 << 1) +# define DP_TEST_LINK_EDID_READ (1 << 2) +# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */ +# define DP_TEST_LINK_FAUX_PATTERN (1 << 4) /* DPCD >= 1.2 */ +# define DP_TEST_LINK_AUDIO_PATTERN (1 << 5) /* DPCD >= 1.2 */ +# define DP_TEST_LINK_AUDIO_DISABLED_VIDEO (1 << 6) /* DPCD >= 1.2 */ + +#define DP_TEST_LINK_RATE 0x219 +# define DP_LINK_RATE_162 (0x6) +# define DP_LINK_RATE_27 (0xa) + +#define DP_TEST_LANE_COUNT 0x220 + +#define DP_TEST_PATTERN 0x221 +# define DP_NO_TEST_PATTERN 0x0 +# define DP_COLOR_RAMP 0x1 +# define DP_BLACK_AND_WHITE_VERTICAL_LINES 0x2 +# define DP_COLOR_SQUARE 0x3 + +#define DP_TEST_H_TOTAL_HI 0x222 +#define DP_TEST_H_TOTAL_LO 0x223 + +#define DP_TEST_V_TOTAL_HI 0x224 +#define DP_TEST_V_TOTAL_LO 0x225 + +#define DP_TEST_H_START_HI 0x226 +#define DP_TEST_H_START_LO 0x227 + +#define DP_TEST_V_START_HI 0x228 +#define DP_TEST_V_START_LO 0x229 + +#define DP_TEST_HSYNC_HI 0x22A +# define DP_TEST_HSYNC_POLARITY (1 << 7) +# define DP_TEST_HSYNC_WIDTH_HI_MASK (127 << 0) +#define DP_TEST_HSYNC_WIDTH_LO 0x22B + +#define DP_TEST_VSYNC_HI 0x22C +# define DP_TEST_VSYNC_POLARITY (1 << 7) +# define DP_TEST_VSYNC_WIDTH_HI_MASK (127 << 0) +#define DP_TEST_VSYNC_WIDTH_LO 0x22D + +#define DP_TEST_H_WIDTH_HI 0x22E +#define DP_TEST_H_WIDTH_LO 0x22F + +#define DP_TEST_V_HEIGHT_HI 0x230 +#define DP_TEST_V_HEIGHT_LO 0x231 + +#define DP_TEST_MISC0 0x232 +# define DP_TEST_SYNC_CLOCK (1 << 0) +# define DP_TEST_COLOR_FORMAT_MASK (3 << 1) +# define DP_TEST_COLOR_FORMAT_SHIFT 1 +# define DP_COLOR_FORMAT_RGB (0 << 1) +# define DP_COLOR_FORMAT_YCbCr422 (1 << 1) +# define DP_COLOR_FORMAT_YCbCr444 (2 << 1) +# define DP_TEST_DYNAMIC_RANGE_VESA (0 << 3) +# define DP_TEST_DYNAMIC_RANGE_CEA (1 << 3) +# define DP_TEST_YCBCR_COEFFICIENTS (1 << 4) +# define DP_YCBCR_COEFFICIENTS_ITU601 (0 << 4) +# define DP_YCBCR_COEFFICIENTS_ITU709 (1 << 4) +# define DP_TEST_BIT_DEPTH_MASK (7 << 5) +# define DP_TEST_BIT_DEPTH_SHIFT 5 +# define DP_TEST_BIT_DEPTH_6 (0 << 5) +# define DP_TEST_BIT_DEPTH_8 (1 << 5) +# define DP_TEST_BIT_DEPTH_10 (2 << 5) +# define DP_TEST_BIT_DEPTH_12 (3 << 5) +# define DP_TEST_BIT_DEPTH_16 (4 << 5) + +#define DP_TEST_MISC1 0x233 +# define DP_TEST_REFRESH_DENOMINATOR (1 << 0) +# define DP_TEST_INTERLACED (1 << 1) + +#define DP_TEST_REFRESH_RATE_NUMERATOR 0x234 + +#define DP_TEST_MISC0 0x232 + +#define DP_TEST_CRC_R_CR 0x240 +#define DP_TEST_CRC_G_Y 0x242 +#define DP_TEST_CRC_B_CB 0x244 + +#define DP_TEST_SINK_MISC 0x246 +# define DP_TEST_CRC_SUPPORTED (1 << 5) +# define DP_TEST_COUNT_MASK 0xf + +#define DP_PHY_TEST_PATTERN 0x248 +# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7 +# define DP_PHY_TEST_PATTERN_NONE 0x0 +# define DP_PHY_TEST_PATTERN_D10_2 0x1 +# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2 +# define DP_PHY_TEST_PATTERN_PRBS7 0x3 +# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4 +# define DP_PHY_TEST_PATTERN_CP2520 0x5 + +#define DP_PHY_SQUARE_PATTERN 0x249 + +#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A +#define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250 +#define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251 +#define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252 +#define DP_TEST_80BIT_CUSTOM_PATTERN_31_24 0x253 +#define DP_TEST_80BIT_CUSTOM_PATTERN_39_32 0x254 +#define DP_TEST_80BIT_CUSTOM_PATTERN_47_40 0x255 +#define DP_TEST_80BIT_CUSTOM_PATTERN_55_48 0x256 +#define DP_TEST_80BIT_CUSTOM_PATTERN_63_56 0x257 +#define DP_TEST_80BIT_CUSTOM_PATTERN_71_64 0x258 +#define DP_TEST_80BIT_CUSTOM_PATTERN_79_72 0x259 + +#define DP_TEST_RESPONSE 0x260 +# define DP_TEST_ACK (1 << 0) +# define DP_TEST_NAK (1 << 1) +# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2) + +#define DP_TEST_EDID_CHECKSUM 0x261 + +#define DP_TEST_SINK 0x270 +# define DP_TEST_SINK_START (1 << 0) +#define DP_TEST_AUDIO_MODE 0x271 +#define DP_TEST_AUDIO_PATTERN_TYPE 0x272 +#define DP_TEST_AUDIO_PERIOD_CH1 0x273 +#define DP_TEST_AUDIO_PERIOD_CH2 0x274 +#define DP_TEST_AUDIO_PERIOD_CH3 0x275 +#define DP_TEST_AUDIO_PERIOD_CH4 0x276 +#define DP_TEST_AUDIO_PERIOD_CH5 0x277 +#define DP_TEST_AUDIO_PERIOD_CH6 0x278 +#define DP_TEST_AUDIO_PERIOD_CH7 0x279 +#define DP_TEST_AUDIO_PERIOD_CH8 0x27A + +#define DP_FEC_STATUS 0x280 /* 1.4 */ +# define DP_FEC_DECODE_EN_DETECTED (1 << 0) +# define DP_FEC_DECODE_DIS_DETECTED (1 << 1) + +#define DP_FEC_ERROR_COUNT_LSB 0x0281 /* 1.4 */ + +#define DP_FEC_ERROR_COUNT_MSB 0x0282 /* 1.4 */ +# define DP_FEC_ERROR_COUNT_MASK 0x7F +# define DP_FEC_ERR_COUNT_VALID (1 << 7) + +#define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */ +# define DP_PAYLOAD_TABLE_UPDATED (1 << 0) +# define DP_PAYLOAD_ACT_HANDLED (1 << 1) + +#define DP_VC_PAYLOAD_ID_SLOT_1 0x2c1 /* 1.2 MST */ +/* up to ID_SLOT_63 at 0x2ff */ + +/* Source Device-specific */ +#define DP_SOURCE_OUI 0x300 + +/* Sink Device-specific */ +#define DP_SINK_OUI 0x400 + +/* Branch Device-specific */ +#define DP_BRANCH_OUI 0x500 +#define DP_BRANCH_ID 0x503 +#define DP_BRANCH_REVISION_START 0x509 +#define DP_BRANCH_HW_REV 0x509 +#define DP_BRANCH_SW_REV 0x50A + +/* Link/Sink Device Power Control */ +#define DP_SET_POWER 0x600 +# define DP_SET_POWER_D0 0x1 +# define DP_SET_POWER_D3 0x2 +# define DP_SET_POWER_MASK 0x3 +# define DP_SET_POWER_D3_AUX_ON 0x5 + +/* eDP-specific */ +#define DP_EDP_DPCD_REV 0x700 /* eDP 1.2 */ +# define DP_EDP_11 0x00 +# define DP_EDP_12 0x01 +# define DP_EDP_13 0x02 +# define DP_EDP_14 0x03 +# define DP_EDP_14a 0x04 /* eDP 1.4a */ +# define DP_EDP_14b 0x05 /* eDP 1.4b */ + +#define DP_EDP_GENERAL_CAP_1 0x701 +# define DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP (1 << 0) +# define DP_EDP_BACKLIGHT_PIN_ENABLE_CAP (1 << 1) +# define DP_EDP_BACKLIGHT_AUX_ENABLE_CAP (1 << 2) +# define DP_EDP_PANEL_SELF_TEST_PIN_ENABLE_CAP (1 << 3) +# define DP_EDP_PANEL_SELF_TEST_AUX_ENABLE_CAP (1 << 4) +# define DP_EDP_FRC_ENABLE_CAP (1 << 5) +# define DP_EDP_COLOR_ENGINE_CAP (1 << 6) +# define DP_EDP_SET_POWER_CAP (1 << 7) + +#define DP_EDP_BACKLIGHT_ADJUSTMENT_CAP 0x702 +# define DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP (1 << 0) +# define DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP (1 << 1) +# define DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT (1 << 2) +# define DP_EDP_BACKLIGHT_AUX_PWM_PRODUCT_CAP (1 << 3) +# define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_CAP (1 << 4) +# define DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP (1 << 5) +# define DP_EDP_DYNAMIC_BACKLIGHT_CAP (1 << 6) +# define DP_EDP_VBLANK_BACKLIGHT_UPDATE_CAP (1 << 7) + +#define DP_EDP_GENERAL_CAP_2 0x703 +# define DP_EDP_OVERDRIVE_ENGINE_ENABLED (1 << 0) + +#define DP_EDP_GENERAL_CAP_3 0x704 /* eDP 1.4 */ +# define DP_EDP_X_REGION_CAP_MASK (0xf << 0) +# define DP_EDP_X_REGION_CAP_SHIFT 0 +# define DP_EDP_Y_REGION_CAP_MASK (0xf << 4) +# define DP_EDP_Y_REGION_CAP_SHIFT 4 + +#define DP_EDP_DISPLAY_CONTROL_REGISTER 0x720 +# define DP_EDP_BACKLIGHT_ENABLE (1 << 0) +# define DP_EDP_BLACK_VIDEO_ENABLE (1 << 1) +# define DP_EDP_FRC_ENABLE (1 << 2) +# define DP_EDP_COLOR_ENGINE_ENABLE (1 << 3) +# define DP_EDP_VBLANK_BACKLIGHT_UPDATE_ENABLE (1 << 7) + +#define DP_EDP_BACKLIGHT_MODE_SET_REGISTER 0x721 +# define DP_EDP_BACKLIGHT_CONTROL_MODE_MASK (3 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_PWM (0 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET (1 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD (2 << 0) +# define DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT (3 << 0) +# define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_ENABLE (1 << 2) +# define DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE (1 << 3) +# define DP_EDP_DYNAMIC_BACKLIGHT_ENABLE (1 << 4) +# define DP_EDP_REGIONAL_BACKLIGHT_ENABLE (1 << 5) +# define DP_EDP_UPDATE_REGION_BRIGHTNESS (1 << 6) /* eDP 1.4 */ + +#define DP_EDP_BACKLIGHT_BRIGHTNESS_MSB 0x722 +#define DP_EDP_BACKLIGHT_BRIGHTNESS_LSB 0x723 + +#define DP_EDP_PWMGEN_BIT_COUNT 0x724 +#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN 0x725 +#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX 0x726 +# define DP_EDP_PWMGEN_BIT_COUNT_MASK (0x1f << 0) + +#define DP_EDP_BACKLIGHT_CONTROL_STATUS 0x727 + +#define DP_EDP_BACKLIGHT_FREQ_SET 0x728 +# define DP_EDP_BACKLIGHT_FREQ_BASE_KHZ 27000 + +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB 0x72a +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID 0x72b +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB 0x72c + +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB 0x72d +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID 0x72e +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB 0x72f + +#define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET 0x732 +#define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET 0x733 + +#define DP_EDP_REGIONAL_BACKLIGHT_BASE 0x740 /* eDP 1.4 */ +#define DP_EDP_REGIONAL_BACKLIGHT_0 0x741 /* eDP 1.4 */ + +#define DP_EDP_MSO_LINK_CAPABILITIES 0x7a4 /* eDP 1.4 */ +# define DP_EDP_MSO_NUMBER_OF_LINKS_MASK (7 << 0) +# define DP_EDP_MSO_NUMBER_OF_LINKS_SHIFT 0 +# define DP_EDP_MSO_INDEPENDENT_LINK_BIT (1 << 3) + +/* Sideband MSG Buffers */ +#define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */ +#define DP_SIDEBAND_MSG_UP_REQ_BASE 0x1600 /* 1.2 MST */ + +/* DPRX Event Status Indicator */ +#define DP_SINK_COUNT_ESI 0x2002 /* same as 0x200 */ +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* same as 0x201 */ + +#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */ +# define DP_RX_GTC_MSTR_REQ_STATUS_CHANGE (1 << 0) +# define DP_LOCK_ACQUISITION_REQUEST (1 << 1) +# define DP_CEC_IRQ (1 << 2) + +#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ +# define RX_CAP_CHANGED (1 << 0) +# define LINK_STATUS_CHANGED (1 << 1) +# define STREAM_STATUS_CHANGED (1 << 2) +# define HDMI_LINK_STATUS_CHANGED (1 << 3) +# define CONNECTED_OFF_ENTRY_REQUESTED (1 << 4) + +#define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ +# define DP_PSR_LINK_CRC_ERROR (1 << 0) +# define DP_PSR_RFB_STORAGE_ERROR (1 << 1) +# define DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR (1 << 2) /* eDP 1.4 */ + +#define DP_PSR_ESI 0x2007 /* XXX 1.2? */ +# define DP_PSR_CAPS_CHANGE (1 << 0) + +#define DP_PSR_STATUS 0x2008 /* XXX 1.2? */ +# define DP_PSR_SINK_INACTIVE 0 +# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1 +# define DP_PSR_SINK_ACTIVE_RFB 2 +# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3 +# define DP_PSR_SINK_ACTIVE_RESYNC 4 +# define DP_PSR_SINK_INTERNAL_ERROR 7 +# define DP_PSR_SINK_STATE_MASK 0x07 + +#define DP_SYNCHRONIZATION_LATENCY_IN_SINK 0x2009 /* edp 1.4 */ +# define DP_MAX_RESYNC_FRAME_COUNT_MASK (0xf << 0) +# define DP_MAX_RESYNC_FRAME_COUNT_SHIFT 0 +# define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_MASK (0xf << 4) +# define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_SHIFT 4 + +#define DP_LAST_RECEIVED_PSR_SDP 0x200a /* eDP 1.2 */ +# define DP_PSR_STATE_BIT (1 << 0) /* eDP 1.2 */ +# define DP_UPDATE_RFB_BIT (1 << 1) /* eDP 1.2 */ +# define DP_CRC_VALID_BIT (1 << 2) /* eDP 1.2 */ +# define DP_SU_VALID (1 << 3) /* eDP 1.4 */ +# define DP_FIRST_SCAN_LINE_SU_REGION (1 << 4) /* eDP 1.4 */ +# define DP_LAST_SCAN_LINE_SU_REGION (1 << 5) /* eDP 1.4 */ +# define DP_Y_COORDINATE_VALID (1 << 6) /* eDP 1.4a */ + +#define DP_RECEIVER_ALPM_STATUS 0x200b /* eDP 1.4 */ +# define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0) + +#define DP_LANE0_1_STATUS_ESI 0x200c /* status same as 0x202 */ +#define DP_LANE2_3_STATUS_ESI 0x200d /* status same as 0x203 */ +#define DP_LANE_ALIGN_STATUS_UPDATED_ESI 0x200e /* status same as 0x204 */ +#define DP_SINK_STATUS_ESI 0x200f /* status same as 0x205 */ + +/* Extended Receiver Capability: See DP_DPCD_REV for definitions */ +#define DP_DP13_DPCD_REV 0x2200 + +#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 /* DP 1.3 */ +# define DP_GTC_CAP (1 << 0) /* DP 1.3 */ +# define DP_SST_SPLIT_SDP_CAP (1 << 1) /* DP 1.4 */ +# define DP_AV_SYNC_CAP (1 << 2) /* DP 1.3 */ +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3) /* DP 1.3 */ +# define DP_VSC_EXT_VESA_SDP_SUPPORTED (1 << 4) /* DP 1.4 */ +# define DP_VSC_EXT_VESA_SDP_CHAINING_SUPPORTED (1 << 5) /* DP 1.4 */ +# define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */ +# define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */ + +#define DP_128B132B_SUPPORTED_LINK_RATES 0x2215 /* 2.0 */ +# define DP_UHBR10 (1 << 0) +# define DP_UHBR20 (1 << 1) +# define DP_UHBR13_5 (1 << 2) + +#define DP_128B132B_TRAINING_AUX_RD_INTERVAL 0x2216 /* 2.0 */ +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_1MS_UNIT (1 << 7) +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_MASK 0x7f +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_400_US 0x00 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_4_MS 0x01 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_8_MS 0x02 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_12_MS 0x03 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_16_MS 0x04 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_32_MS 0x05 +# define DP_128B132B_TRAINING_AUX_RD_INTERVAL_64_MS 0x06 + +#define DP_TEST_264BIT_CUSTOM_PATTERN_7_0 0x2230 +#define DP_TEST_264BIT_CUSTOM_PATTERN_263_256 0x2250 + +/* DSC Extended Capability Branch Total DSC Resources */ +#define DP_DSC_SUPPORT_AND_DSC_DECODER_COUNT 0x2260 /* 2.0 */ +# define DP_DSC_DECODER_COUNT_MASK (0b111 << 5) +# define DP_DSC_DECODER_COUNT_SHIFT 5 +#define DP_DSC_MAX_SLICE_COUNT_AND_AGGREGATION_0 0x2270 /* 2.0 */ +# define DP_DSC_DECODER_0_MAXIMUM_SLICE_COUNT_MASK (1 << 0) +# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_MASK (0b111 << 1) +# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_SHIFT 1 + +/* Protocol Converter Extension */ +/* HDMI CEC tunneling over AUX DP 1.3 section 5.3.3.3.1 DPCD 1.4+ */ +#define DP_CEC_TUNNELING_CAPABILITY 0x3000 +# define DP_CEC_TUNNELING_CAPABLE (1 << 0) +# define DP_CEC_SNOOPING_CAPABLE (1 << 1) +# define DP_CEC_MULTIPLE_LA_CAPABLE (1 << 2) + +#define DP_CEC_TUNNELING_CONTROL 0x3001 +# define DP_CEC_TUNNELING_ENABLE (1 << 0) +# define DP_CEC_SNOOPING_ENABLE (1 << 1) + +#define DP_CEC_RX_MESSAGE_INFO 0x3002 +# define DP_CEC_RX_MESSAGE_LEN_MASK (0xf << 0) +# define DP_CEC_RX_MESSAGE_LEN_SHIFT 0 +# define DP_CEC_RX_MESSAGE_HPD_STATE (1 << 4) +# define DP_CEC_RX_MESSAGE_HPD_LOST (1 << 5) +# define DP_CEC_RX_MESSAGE_ACKED (1 << 6) +# define DP_CEC_RX_MESSAGE_ENDED (1 << 7) + +#define DP_CEC_TX_MESSAGE_INFO 0x3003 +# define DP_CEC_TX_MESSAGE_LEN_MASK (0xf << 0) +# define DP_CEC_TX_MESSAGE_LEN_SHIFT 0 +# define DP_CEC_TX_RETRY_COUNT_MASK (0x7 << 4) +# define DP_CEC_TX_RETRY_COUNT_SHIFT 4 +# define DP_CEC_TX_MESSAGE_SEND (1 << 7) + +#define DP_CEC_TUNNELING_IRQ_FLAGS 0x3004 +# define DP_CEC_RX_MESSAGE_INFO_VALID (1 << 0) +# define DP_CEC_RX_MESSAGE_OVERFLOW (1 << 1) +# define DP_CEC_TX_MESSAGE_SENT (1 << 4) +# define DP_CEC_TX_LINE_ERROR (1 << 5) +# define DP_CEC_TX_ADDRESS_NACK_ERROR (1 << 6) +# define DP_CEC_TX_DATA_NACK_ERROR (1 << 7) + +#define DP_CEC_LOGICAL_ADDRESS_MASK 0x300E /* 0x300F word */ +# define DP_CEC_LOGICAL_ADDRESS_0 (1 << 0) +# define DP_CEC_LOGICAL_ADDRESS_1 (1 << 1) +# define DP_CEC_LOGICAL_ADDRESS_2 (1 << 2) +# define DP_CEC_LOGICAL_ADDRESS_3 (1 << 3) +# define DP_CEC_LOGICAL_ADDRESS_4 (1 << 4) +# define DP_CEC_LOGICAL_ADDRESS_5 (1 << 5) +# define DP_CEC_LOGICAL_ADDRESS_6 (1 << 6) +# define DP_CEC_LOGICAL_ADDRESS_7 (1 << 7) +#define DP_CEC_LOGICAL_ADDRESS_MASK_2 0x300F /* 0x300E word */ +# define DP_CEC_LOGICAL_ADDRESS_8 (1 << 0) +# define DP_CEC_LOGICAL_ADDRESS_9 (1 << 1) +# define DP_CEC_LOGICAL_ADDRESS_10 (1 << 2) +# define DP_CEC_LOGICAL_ADDRESS_11 (1 << 3) +# define DP_CEC_LOGICAL_ADDRESS_12 (1 << 4) +# define DP_CEC_LOGICAL_ADDRESS_13 (1 << 5) +# define DP_CEC_LOGICAL_ADDRESS_14 (1 << 6) +# define DP_CEC_LOGICAL_ADDRESS_15 (1 << 7) + +#define DP_CEC_RX_MESSAGE_BUFFER 0x3010 +#define DP_CEC_TX_MESSAGE_BUFFER 0x3020 +#define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10 + +/* PCON CONFIGURE-1 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_1 0x305A +# define DP_PCON_ENABLE_MAX_FRL_BW (7 << 0) +# define DP_PCON_ENABLE_MAX_BW_0GBPS 0 +# define DP_PCON_ENABLE_MAX_BW_9GBPS 1 +# define DP_PCON_ENABLE_MAX_BW_18GBPS 2 +# define DP_PCON_ENABLE_MAX_BW_24GBPS 3 +# define DP_PCON_ENABLE_MAX_BW_32GBPS 4 +# define DP_PCON_ENABLE_MAX_BW_40GBPS 5 +# define DP_PCON_ENABLE_MAX_BW_48GBPS 6 +# define DP_PCON_ENABLE_SOURCE_CTL_MODE (1 << 3) +# define DP_PCON_ENABLE_CONCURRENT_LINK (1 << 4) +# define DP_PCON_ENABLE_SEQUENTIAL_LINK (0 << 4) +# define DP_PCON_ENABLE_LINK_FRL_MODE (1 << 5) +# define DP_PCON_ENABLE_HPD_READY (1 << 6) +# define DP_PCON_ENABLE_HDMI_LINK (1 << 7) + +/* PCON CONFIGURE-2 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_2 0x305B +# define DP_PCON_MAX_LINK_BW_MASK (0x3F << 0) +# define DP_PCON_FRL_BW_MASK_9GBPS (1 << 0) +# define DP_PCON_FRL_BW_MASK_18GBPS (1 << 1) +# define DP_PCON_FRL_BW_MASK_24GBPS (1 << 2) +# define DP_PCON_FRL_BW_MASK_32GBPS (1 << 3) +# define DP_PCON_FRL_BW_MASK_40GBPS (1 << 4) +# define DP_PCON_FRL_BW_MASK_48GBPS (1 << 5) +# define DP_PCON_FRL_LINK_TRAIN_EXTENDED (1 << 6) +# define DP_PCON_FRL_LINK_TRAIN_NORMAL (0 << 6) + +/* PCON HDMI LINK STATUS */ +#define DP_PCON_HDMI_TX_LINK_STATUS 0x303B +# define DP_PCON_HDMI_TX_LINK_ACTIVE (1 << 0) +# define DP_PCON_FRL_READY (1 << 1) + +/* PCON HDMI POST FRL STATUS */ +#define DP_PCON_HDMI_POST_FRL_STATUS 0x3036 +# define DP_PCON_HDMI_LINK_MODE (1 << 0) +# define DP_PCON_HDMI_MODE_TMDS 0 +# define DP_PCON_HDMI_MODE_FRL 1 +# define DP_PCON_HDMI_FRL_TRAINED_BW (0x3F << 1) +# define DP_PCON_FRL_TRAINED_BW_9GBPS (1 << 1) +# define DP_PCON_FRL_TRAINED_BW_18GBPS (1 << 2) +# define DP_PCON_FRL_TRAINED_BW_24GBPS (1 << 3) +# define DP_PCON_FRL_TRAINED_BW_32GBPS (1 << 4) +# define DP_PCON_FRL_TRAINED_BW_40GBPS (1 << 5) +# define DP_PCON_FRL_TRAINED_BW_48GBPS (1 << 6) + +#define DP_PROTOCOL_CONVERTER_CONTROL_0 0x3050 /* DP 1.3 */ +# define DP_HDMI_DVI_OUTPUT_CONFIG (1 << 0) /* DP 1.3 */ +#define DP_PROTOCOL_CONVERTER_CONTROL_1 0x3051 /* DP 1.3 */ +# define DP_CONVERSION_TO_YCBCR420_ENABLE (1 << 0) /* DP 1.3 */ +# define DP_HDMI_EDID_PROCESSING_DISABLE (1 << 1) /* DP 1.4 */ +# define DP_HDMI_AUTONOMOUS_SCRAMBLING_DISABLE (1 << 2) /* DP 1.4 */ +# define DP_HDMI_FORCE_SCRAMBLING (1 << 3) /* DP 1.4 */ +#define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3 */ +# define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */ +# define DP_PCON_ENABLE_DSC_ENCODER (1 << 1) +# define DP_PCON_ENCODER_PPS_OVERRIDE_MASK (0x3 << 2) +# define DP_PCON_ENC_PPS_OVERRIDE_DISABLED 0 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_PARAMS 1 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER 2 +# define DP_CONVERSION_RGB_YCBCR_MASK (7 << 4) +# define DP_CONVERSION_BT601_RGB_YCBCR_ENABLE (1 << 4) +# define DP_CONVERSION_BT709_RGB_YCBCR_ENABLE (1 << 5) +# define DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE (1 << 6) + +/* PCON Downstream HDMI ERROR Status per Lane */ +#define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037 +#define DP_PCON_HDMI_ERROR_STATUS_LN1 0x3038 +#define DP_PCON_HDMI_ERROR_STATUS_LN2 0x3039 +#define DP_PCON_HDMI_ERROR_STATUS_LN3 0x303A +# define DP_PCON_HDMI_ERROR_COUNT_MASK (0x7 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_THREE_PLUS (1 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS (1 << 1) +# define DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS (1 << 2) + +/* PCON HDMI CONFIG PPS Override Buffer + * Valid Offsets to be added to Base : 0-127 + */ +#define DP_PCON_HDMI_PPS_OVERRIDE_BASE 0x3100 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice height + * Offset-0 8LSBs of the Slice height. + * Offset-1 8MSBs of the Slice height. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT 0x3180 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice width + * Offset-0 8LSBs of the Slice width. + * Offset-1 8MSBs of the Slice width. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH 0x3182 + +/* PCON HDMI CONFIG PPS Override Parameter: bits_per_pixel + * Offset-0 8LSBs of the bits_per_pixel. + * Offset-1 2MSBs of the bits_per_pixel. + */ +#define DP_PCON_HDMI_PPS_OVRD_BPP 0x3184 + +/* HDCP 1.3 and HDCP 2.2 */ +#define DP_AUX_HDCP_BKSV 0x68000 +#define DP_AUX_HDCP_RI_PRIME 0x68005 +#define DP_AUX_HDCP_AKSV 0x68007 +#define DP_AUX_HDCP_AN 0x6800C +#define DP_AUX_HDCP_V_PRIME(h) (0x68014 + h * 4) +#define DP_AUX_HDCP_BCAPS 0x68028 +# define DP_BCAPS_REPEATER_PRESENT BIT(1) +# define DP_BCAPS_HDCP_CAPABLE BIT(0) +#define DP_AUX_HDCP_BSTATUS 0x68029 +# define DP_BSTATUS_REAUTH_REQ BIT(3) +# define DP_BSTATUS_LINK_FAILURE BIT(2) +# define DP_BSTATUS_R0_PRIME_READY BIT(1) +# define DP_BSTATUS_READY BIT(0) +#define DP_AUX_HDCP_BINFO 0x6802A +#define DP_AUX_HDCP_KSV_FIFO 0x6802C +#define DP_AUX_HDCP_AINFO 0x6803B + +/* DP HDCP2.2 parameter offsets in DPCD address space */ +#define DP_HDCP_2_2_REG_RTX_OFFSET 0x69000 +#define DP_HDCP_2_2_REG_TXCAPS_OFFSET 0x69008 +#define DP_HDCP_2_2_REG_CERT_RX_OFFSET 0x6900B +#define DP_HDCP_2_2_REG_RRX_OFFSET 0x69215 +#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET 0x6921D +#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET 0x69220 +#define DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET 0x692A0 +#define DP_HDCP_2_2_REG_M_OFFSET 0x692B0 +#define DP_HDCP_2_2_REG_HPRIME_OFFSET 0x692C0 +#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET 0x692E0 +#define DP_HDCP_2_2_REG_RN_OFFSET 0x692F0 +#define DP_HDCP_2_2_REG_LPRIME_OFFSET 0x692F8 +#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET 0x69318 +#define DP_HDCP_2_2_REG_RIV_OFFSET 0x69328 +#define DP_HDCP_2_2_REG_RXINFO_OFFSET 0x69330 +#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET 0x69332 +#define DP_HDCP_2_2_REG_VPRIME_OFFSET 0x69335 +#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET 0x69345 +#define DP_HDCP_2_2_REG_V_OFFSET 0x693E0 +#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET 0x693F0 +#define DP_HDCP_2_2_REG_K_OFFSET 0x693F3 +#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET 0x693F5 +#define DP_HDCP_2_2_REG_MPRIME_OFFSET 0x69473 +#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET 0x69493 +#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET 0x69494 +#define DP_HDCP_2_2_REG_DBG_OFFSET 0x69518 + +/* LTTPR: Link Training (LT)-tunable PHY Repeaters */ +#define DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 0xf0000 /* 1.3 */ +#define DP_MAX_LINK_RATE_PHY_REPEATER 0xf0001 /* 1.4a */ +#define DP_PHY_REPEATER_CNT 0xf0002 /* 1.3 */ +#define DP_PHY_REPEATER_MODE 0xf0003 /* 1.3 */ +#define DP_MAX_LANE_COUNT_PHY_REPEATER 0xf0004 /* 1.4a */ +#define DP_Repeater_FEC_CAPABILITY 0xf0004 /* 1.4 */ +#define DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT 0xf0005 /* 1.4a */ +#define DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER 0xf0006 /* 2.0 */ +# define DP_PHY_REPEATER_128B132B_SUPPORTED (1 << 0) +/* See DP_128B132B_SUPPORTED_LINK_RATES for values */ +#define DP_PHY_REPEATER_128B132B_RATES 0xf0007 /* 2.0 */ +#define DP_PHY_REPEATER_EQ_DONE 0xf0008 /* 2.0 E11 */ + +enum drm_dp_phy { + DP_PHY_DPRX, + + DP_PHY_LTTPR1, + DP_PHY_LTTPR2, + DP_PHY_LTTPR3, + DP_PHY_LTTPR4, + DP_PHY_LTTPR5, + DP_PHY_LTTPR6, + DP_PHY_LTTPR7, + DP_PHY_LTTPR8, + + DP_MAX_LTTPR_COUNT = DP_PHY_LTTPR8, +}; + +#define DP_PHY_LTTPR(i) (DP_PHY_LTTPR1 + (i)) + +#define __DP_LTTPR1_BASE 0xf0010 /* 1.3 */ +#define __DP_LTTPR2_BASE 0xf0060 /* 1.3 */ +#define DP_LTTPR_BASE(dp_phy) \ + (__DP_LTTPR1_BASE + (__DP_LTTPR2_BASE - __DP_LTTPR1_BASE) * \ + ((dp_phy) - DP_PHY_LTTPR1)) + +#define DP_LTTPR_REG(dp_phy, lttpr1_reg) \ + (DP_LTTPR_BASE(dp_phy) - DP_LTTPR_BASE(DP_PHY_LTTPR1) + (lttpr1_reg)) + +#define DP_TRAINING_PATTERN_SET_PHY_REPEATER1 0xf0010 /* 1.3 */ +#define DP_TRAINING_PATTERN_SET_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_TRAINING_PATTERN_SET_PHY_REPEATER1) + +#define DP_TRAINING_LANE0_SET_PHY_REPEATER1 0xf0011 /* 1.3 */ +#define DP_TRAINING_LANE0_SET_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_TRAINING_LANE0_SET_PHY_REPEATER1) + +#define DP_TRAINING_LANE1_SET_PHY_REPEATER1 0xf0012 /* 1.3 */ +#define DP_TRAINING_LANE2_SET_PHY_REPEATER1 0xf0013 /* 1.3 */ +#define DP_TRAINING_LANE3_SET_PHY_REPEATER1 0xf0014 /* 1.3 */ +#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0020 /* 1.4a */ +#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1) + +#define DP_TRANSMITTER_CAPABILITY_PHY_REPEATER1 0xf0021 /* 1.4a */ +# define DP_VOLTAGE_SWING_LEVEL_3_SUPPORTED BIT(0) +# define DP_PRE_EMPHASIS_LEVEL_3_SUPPORTED BIT(1) + +#define DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0022 /* 2.0 */ +#define DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_128B132B_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1) +/* see DP_128B132B_TRAINING_AUX_RD_INTERVAL for values */ + +#define DP_LANE0_1_STATUS_PHY_REPEATER1 0xf0030 /* 1.3 */ +#define DP_LANE0_1_STATUS_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_LANE0_1_STATUS_PHY_REPEATER1) + +#define DP_LANE2_3_STATUS_PHY_REPEATER1 0xf0031 /* 1.3 */ + +#define DP_LANE_ALIGN_STATUS_UPDATED_PHY_REPEATER1 0xf0032 /* 1.3 */ +#define DP_ADJUST_REQUEST_LANE0_1_PHY_REPEATER1 0xf0033 /* 1.3 */ +#define DP_ADJUST_REQUEST_LANE2_3_PHY_REPEATER1 0xf0034 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE0_PHY_REPEATER1 0xf0035 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE1_PHY_REPEATER1 0xf0037 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1 0xf0039 /* 1.3 */ +#define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1 0xf003b /* 1.3 */ + +#define __DP_FEC1_BASE 0xf0290 /* 1.4 */ +#define __DP_FEC2_BASE 0xf0298 /* 1.4 */ +#define DP_FEC_BASE(dp_phy) \ + (__DP_FEC1_BASE + ((__DP_FEC2_BASE - __DP_FEC1_BASE) * \ + ((dp_phy) - DP_PHY_LTTPR1))) + +#define DP_FEC_REG(dp_phy, fec1_reg) \ + (DP_FEC_BASE(dp_phy) - DP_FEC_BASE(DP_PHY_LTTPR1) + fec1_reg) + +#define DP_FEC_STATUS_PHY_REPEATER1 0xf0290 /* 1.4 */ +#define DP_FEC_STATUS_PHY_REPEATER(dp_phy) \ + DP_FEC_REG(dp_phy, DP_FEC_STATUS_PHY_REPEATER1) + +#define DP_FEC_ERROR_COUNT_PHY_REPEATER1 0xf0291 /* 1.4 */ +#define DP_FEC_CAPABILITY_PHY_REPEATER1 0xf0294 /* 1.4a */ + +#define DP_LTTPR_MAX_ADD 0xf02ff /* 1.4 */ + +#define DP_DPCD_MAX_ADD 0xfffff /* 1.4 */ + +/* Repeater modes */ +#define DP_PHY_REPEATER_MODE_TRANSPARENT 0x55 /* 1.3 */ +#define DP_PHY_REPEATER_MODE_NON_TRANSPARENT 0xaa /* 1.3 */ + +/* DP HDCP message start offsets in DPCD address space */ +#define DP_HDCP_2_2_AKE_INIT_OFFSET DP_HDCP_2_2_REG_RTX_OFFSET +#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET DP_HDCP_2_2_REG_CERT_RX_OFFSET +#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKPUB_KM_OFFSET +#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET +#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET DP_HDCP_2_2_REG_HPRIME_OFFSET +#define DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET \ + DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET +#define DP_HDCP_2_2_LC_INIT_OFFSET DP_HDCP_2_2_REG_RN_OFFSET +#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET DP_HDCP_2_2_REG_LPRIME_OFFSET +#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET DP_HDCP_2_2_REG_EDKEY_KS_OFFSET +#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET DP_HDCP_2_2_REG_RXINFO_OFFSET +#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET DP_HDCP_2_2_REG_V_OFFSET +#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET +#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET DP_HDCP_2_2_REG_MPRIME_OFFSET + +#define HDCP_2_2_DP_RXSTATUS_LEN 1 +#define HDCP_2_2_DP_RXSTATUS_READY(x) ((x) & BIT(0)) +#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x) ((x) & BIT(1)) +#define HDCP_2_2_DP_RXSTATUS_PAIRING(x) ((x) & BIT(2)) +#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3)) +#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x) ((x) & BIT(4)) + +/* DP 1.2 Sideband message defines */ +/* peer device type - DP 1.2a Table 2-92 */ +#define DP_PEER_DEVICE_NONE 0x0 +#define DP_PEER_DEVICE_SOURCE_OR_SST 0x1 +#define DP_PEER_DEVICE_MST_BRANCHING 0x2 +#define DP_PEER_DEVICE_SST_SINK 0x3 +#define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4 + +/* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */ +#define DP_GET_MSG_TRANSACTION_VERSION 0x00 /* DP 1.3 */ +#define DP_LINK_ADDRESS 0x01 +#define DP_CONNECTION_STATUS_NOTIFY 0x02 +#define DP_ENUM_PATH_RESOURCES 0x10 +#define DP_ALLOCATE_PAYLOAD 0x11 +#define DP_QUERY_PAYLOAD 0x12 +#define DP_RESOURCE_STATUS_NOTIFY 0x13 +#define DP_CLEAR_PAYLOAD_ID_TABLE 0x14 +#define DP_REMOTE_DPCD_READ 0x20 +#define DP_REMOTE_DPCD_WRITE 0x21 +#define DP_REMOTE_I2C_READ 0x22 +#define DP_REMOTE_I2C_WRITE 0x23 +#define DP_POWER_UP_PHY 0x24 +#define DP_POWER_DOWN_PHY 0x25 +#define DP_SINK_EVENT_NOTIFY 0x30 +#define DP_QUERY_STREAM_ENC_STATUS 0x38 +#define DP_QUERY_STREAM_ENC_STATUS_STATE_NO_EXIST 0 +#define DP_QUERY_STREAM_ENC_STATUS_STATE_INACTIVE 1 +#define DP_QUERY_STREAM_ENC_STATUS_STATE_ACTIVE 2 + +/* DP 1.2 MST sideband reply types */ +#define DP_SIDEBAND_REPLY_ACK 0x00 +#define DP_SIDEBAND_REPLY_NAK 0x01 + +/* DP 1.2 MST sideband nak reasons - table 2.84 */ +#define DP_NAK_WRITE_FAILURE 0x01 +#define DP_NAK_INVALID_READ 0x02 +#define DP_NAK_CRC_FAILURE 0x03 +#define DP_NAK_BAD_PARAM 0x04 +#define DP_NAK_DEFER 0x05 +#define DP_NAK_LINK_FAILURE 0x06 +#define DP_NAK_NO_RESOURCES 0x07 +#define DP_NAK_DPCD_FAIL 0x08 +#define DP_NAK_I2C_NAK 0x09 +#define DP_NAK_ALLOCATE_FAIL 0x0a + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +/* DP 1.2 MST PORTs - Section 2.5.1 v1.2a spec */ +#define DP_MST_PHYSICAL_PORT_0 0 +#define DP_MST_LOGICAL_PORT_0 8 + +#define DP_LINK_CONSTANT_N_VALUE 0x8000 +#define DP_LINK_STATUS_SIZE 6 + +#define DP_BRANCH_OUI_HEADER_SIZE 0xc +#define DP_RECEIVER_CAP_SIZE 0xf +#define DP_DSC_RECEIVER_CAP_SIZE 0xf +#define EDP_PSR_RECEIVER_CAP_SIZE 2 +#define EDP_DISPLAY_CTL_CAP_SIZE 3 +#define DP_LTTPR_COMMON_CAP_SIZE 8 +#define DP_LTTPR_PHY_CAP_SIZE 3 + +#define DP_SDP_AUDIO_TIMESTAMP 0x01 +#define DP_SDP_AUDIO_STREAM 0x02 +#define DP_SDP_EXTENSION 0x04 /* DP 1.1 */ +#define DP_SDP_AUDIO_COPYMANAGEMENT 0x05 /* DP 1.2 */ +#define DP_SDP_ISRC 0x06 /* DP 1.2 */ +#define DP_SDP_VSC 0x07 /* DP 1.2 */ +#define DP_SDP_CAMERA_GENERIC(i) (0x08 + (i)) /* 0-7, DP 1.3 */ +#define DP_SDP_PPS 0x10 /* DP 1.4 */ +#define DP_SDP_VSC_EXT_VESA 0x20 /* DP 1.4 */ +#define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */ +/* 0x80+ CEA-861 infoframe types */ + +#define DP_SDP_AUDIO_INFOFRAME_HB2 0x1b + +/** + * struct dp_sdp_header - DP secondary data packet header + * @HB0: Secondary Data Packet ID + * @HB1: Secondary Data Packet Type + * @HB2: Secondary Data Packet Specific header, Byte 0 + * @HB3: Secondary Data packet Specific header, Byte 1 + */ +struct dp_sdp_header { + u8 HB0; + u8 HB1; + u8 HB2; + u8 HB3; +} __packed; + +#define EDP_SDP_HEADER_REVISION_MASK 0x1F +#define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES 0x1F +#define DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 0x7F + +/** + * struct dp_sdp - DP secondary data packet + * @sdp_header: DP secondary data packet header + * @db: DP secondaray data packet data blocks + * VSC SDP Payload for PSR + * db[0]: Stereo Interface + * db[1]: 0 - PSR State; 1 - Update RFB; 2 - CRC Valid + * db[2]: CRC value bits 7:0 of the R or Cr component + * db[3]: CRC value bits 15:8 of the R or Cr component + * db[4]: CRC value bits 7:0 of the G or Y component + * db[5]: CRC value bits 15:8 of the G or Y component + * db[6]: CRC value bits 7:0 of the B or Cb component + * db[7]: CRC value bits 15:8 of the B or Cb component + * db[8] - db[31]: Reserved + * VSC SDP Payload for Pixel Encoding/Colorimetry Format + * db[0] - db[15]: Reserved + * db[16]: Pixel Encoding and Colorimetry Formats + * db[17]: Dynamic Range and Component Bit Depth + * db[18]: Content Type + * db[19] - db[31]: Reserved + */ +struct dp_sdp { + struct dp_sdp_header sdp_header; + u8 db[32]; +} __packed; + +#define EDP_VSC_PSR_STATE_ACTIVE (1<<0) +#define EDP_VSC_PSR_UPDATE_RFB (1<<1) +#define EDP_VSC_PSR_CRC_VALUES_VALID (1<<2) + +/** + * enum dp_pixelformat - drm DP Pixel encoding formats + * + * This enum is used to indicate DP VSC SDP Pixel encoding formats. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] + * + * @DP_PIXELFORMAT_RGB: RGB pixel encoding format + * @DP_PIXELFORMAT_YUV444: YCbCr 4:4:4 pixel encoding format + * @DP_PIXELFORMAT_YUV422: YCbCr 4:2:2 pixel encoding format + * @DP_PIXELFORMAT_YUV420: YCbCr 4:2:0 pixel encoding format + * @DP_PIXELFORMAT_Y_ONLY: Y Only pixel encoding format + * @DP_PIXELFORMAT_RAW: RAW pixel encoding format + * @DP_PIXELFORMAT_RESERVED: Reserved pixel encoding format + */ +enum dp_pixelformat { + DP_PIXELFORMAT_RGB = 0, + DP_PIXELFORMAT_YUV444 = 0x1, + DP_PIXELFORMAT_YUV422 = 0x2, + DP_PIXELFORMAT_YUV420 = 0x3, + DP_PIXELFORMAT_Y_ONLY = 0x4, + DP_PIXELFORMAT_RAW = 0x5, + DP_PIXELFORMAT_RESERVED = 0x6, +}; + +/** + * enum dp_colorimetry - drm DP Colorimetry formats + * + * This enum is used to indicate DP VSC SDP Colorimetry formats. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] and a name of enum member follows DRM_MODE_COLORIMETRY definition. + * + * @DP_COLORIMETRY_DEFAULT: sRGB (IEC 61966-2-1) or + * ITU-R BT.601 colorimetry format + * @DP_COLORIMETRY_RGB_WIDE_FIXED: RGB wide gamut fixed point colorimetry format + * @DP_COLORIMETRY_BT709_YCC: ITU-R BT.709 colorimetry format + * @DP_COLORIMETRY_RGB_WIDE_FLOAT: RGB wide gamut floating point + * (scRGB (IEC 61966-2-2)) colorimetry format + * @DP_COLORIMETRY_XVYCC_601: xvYCC601 colorimetry format + * @DP_COLORIMETRY_OPRGB: OpRGB colorimetry format + * @DP_COLORIMETRY_XVYCC_709: xvYCC709 colorimetry format + * @DP_COLORIMETRY_DCI_P3_RGB: DCI-P3 (SMPTE RP 431-2) colorimetry format + * @DP_COLORIMETRY_SYCC_601: sYCC601 colorimetry format + * @DP_COLORIMETRY_RGB_CUSTOM: RGB Custom Color Profile colorimetry format + * @DP_COLORIMETRY_OPYCC_601: opYCC601 colorimetry format + * @DP_COLORIMETRY_BT2020_RGB: ITU-R BT.2020 R' G' B' colorimetry format + * @DP_COLORIMETRY_BT2020_CYCC: ITU-R BT.2020 Y'c C'bc C'rc colorimetry format + * @DP_COLORIMETRY_BT2020_YCC: ITU-R BT.2020 Y' C'b C'r colorimetry format + */ +enum dp_colorimetry { + DP_COLORIMETRY_DEFAULT = 0, + DP_COLORIMETRY_RGB_WIDE_FIXED = 0x1, + DP_COLORIMETRY_BT709_YCC = 0x1, + DP_COLORIMETRY_RGB_WIDE_FLOAT = 0x2, + DP_COLORIMETRY_XVYCC_601 = 0x2, + DP_COLORIMETRY_OPRGB = 0x3, + DP_COLORIMETRY_XVYCC_709 = 0x3, + DP_COLORIMETRY_DCI_P3_RGB = 0x4, + DP_COLORIMETRY_SYCC_601 = 0x4, + DP_COLORIMETRY_RGB_CUSTOM = 0x5, + DP_COLORIMETRY_OPYCC_601 = 0x5, + DP_COLORIMETRY_BT2020_RGB = 0x6, + DP_COLORIMETRY_BT2020_CYCC = 0x6, + DP_COLORIMETRY_BT2020_YCC = 0x7, +}; + +/** + * enum dp_dynamic_range - drm DP Dynamic Range + * + * This enum is used to indicate DP VSC SDP Dynamic Range. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] + * + * @DP_DYNAMIC_RANGE_VESA: VESA range + * @DP_DYNAMIC_RANGE_CTA: CTA range + */ +enum dp_dynamic_range { + DP_DYNAMIC_RANGE_VESA = 0, + DP_DYNAMIC_RANGE_CTA = 1, +}; + +/** + * enum dp_content_type - drm DP Content Type + * + * This enum is used to indicate DP VSC SDP Content Types. + * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through + * DB18] + * CTA-861-G defines content types and expected processing by a sink device + * + * @DP_CONTENT_TYPE_NOT_DEFINED: Not defined type + * @DP_CONTENT_TYPE_GRAPHICS: Graphics type + * @DP_CONTENT_TYPE_PHOTO: Photo type + * @DP_CONTENT_TYPE_VIDEO: Video type + * @DP_CONTENT_TYPE_GAME: Game type + */ +enum dp_content_type { + DP_CONTENT_TYPE_NOT_DEFINED = 0x00, + DP_CONTENT_TYPE_GRAPHICS = 0x01, + DP_CONTENT_TYPE_PHOTO = 0x02, + DP_CONTENT_TYPE_VIDEO = 0x03, + DP_CONTENT_TYPE_GAME = 0x04, +}; + +#endif /* _DRM_DP_H_ */ diff --git a/include/drm/display/drm_dp_aux_bus.h b/include/drm/display/drm_dp_aux_bus.h new file mode 100644 index 000000000000..8a0a486383c5 --- /dev/null +++ b/include/drm/display/drm_dp_aux_bus.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2021 Google Inc. + * + * The DP AUX bus is used for devices that are connected over a DisplayPort + * AUX bus. The devices on the far side of the bus are referred to as + * endpoints in this code. + */ + +#ifndef _DP_AUX_BUS_H_ +#define _DP_AUX_BUS_H_ + +#include <linux/device.h> +#include <linux/mod_devicetable.h> + +/** + * struct dp_aux_ep_device - Main dev structure for DP AUX endpoints + * + * This is used to instantiate devices that are connected via a DP AUX + * bus. Usually the device is a panel, but conceivable other devices could + * be hooked up there. + */ +struct dp_aux_ep_device { + /** @dev: The normal dev pointer */ + struct device dev; + /** @aux: Pointer to the aux bus */ + struct drm_dp_aux *aux; +}; + +struct dp_aux_ep_driver { + int (*probe)(struct dp_aux_ep_device *aux_ep); + void (*remove)(struct dp_aux_ep_device *aux_ep); + void (*shutdown)(struct dp_aux_ep_device *aux_ep); + struct device_driver driver; +}; + +static inline struct dp_aux_ep_device *to_dp_aux_ep_dev(struct device *dev) +{ + return container_of(dev, struct dp_aux_ep_device, dev); +} + +static inline struct dp_aux_ep_driver *to_dp_aux_ep_drv(struct device_driver *drv) +{ + return container_of(drv, struct dp_aux_ep_driver, driver); +} + +int of_dp_aux_populate_bus(struct drm_dp_aux *aux, + int (*done_probing)(struct drm_dp_aux *aux)); +void of_dp_aux_depopulate_bus(struct drm_dp_aux *aux); +int devm_of_dp_aux_populate_bus(struct drm_dp_aux *aux, + int (*done_probing)(struct drm_dp_aux *aux)); + +/* Deprecated versions of the above functions. To be removed when no callers. */ +static inline int of_dp_aux_populate_ep_devices(struct drm_dp_aux *aux) +{ + int ret; + + ret = of_dp_aux_populate_bus(aux, NULL); + + /* New API returns -ENODEV for no child case; adapt to old assumption */ + return (ret != -ENODEV) ? ret : 0; +} + +static inline int devm_of_dp_aux_populate_ep_devices(struct drm_dp_aux *aux) +{ + int ret; + + ret = devm_of_dp_aux_populate_bus(aux, NULL); + + /* New API returns -ENODEV for no child case; adapt to old assumption */ + return (ret != -ENODEV) ? ret : 0; +} + +static inline void of_dp_aux_depopulate_ep_devices(struct drm_dp_aux *aux) +{ + of_dp_aux_depopulate_bus(aux); +} + +#define dp_aux_dp_driver_register(aux_ep_drv) \ + __dp_aux_dp_driver_register(aux_ep_drv, THIS_MODULE) +int __dp_aux_dp_driver_register(struct dp_aux_ep_driver *aux_ep_drv, + struct module *owner); +void dp_aux_dp_driver_unregister(struct dp_aux_ep_driver *aux_ep_drv); + +#endif /* _DP_AUX_BUS_H_ */ diff --git a/include/drm/display/drm_dp_dual_mode_helper.h b/include/drm/display/drm_dp_dual_mode_helper.h new file mode 100644 index 000000000000..7ee482265087 --- /dev/null +++ b/include/drm/display/drm_dp_dual_mode_helper.h @@ -0,0 +1,121 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_DP_DUAL_MODE_HELPER_H +#define DRM_DP_DUAL_MODE_HELPER_H + +#include <linux/types.h> + +/* + * Optional for type 1 DVI adaptors + * Mandatory for type 1 HDMI and type 2 adaptors + */ +#define DP_DUAL_MODE_HDMI_ID 0x00 /* 00-0f */ +#define DP_DUAL_MODE_HDMI_ID_LEN 16 +/* + * Optional for type 1 adaptors + * Mandatory for type 2 adaptors + */ +#define DP_DUAL_MODE_ADAPTOR_ID 0x10 +#define DP_DUAL_MODE_REV_MASK 0x07 +#define DP_DUAL_MODE_REV_TYPE2 0x00 +#define DP_DUAL_MODE_TYPE_MASK 0xf0 +#define DP_DUAL_MODE_TYPE_TYPE2 0xa0 +/* This field is marked reserved in dual mode spec, used in LSPCON */ +#define DP_DUAL_MODE_TYPE_HAS_DPCD 0x08 +#define DP_DUAL_MODE_IEEE_OUI 0x11 /* 11-13*/ +#define DP_DUAL_IEEE_OUI_LEN 3 +#define DP_DUAL_DEVICE_ID 0x14 /* 14-19 */ +#define DP_DUAL_DEVICE_ID_LEN 6 +#define DP_DUAL_MODE_HARDWARE_REV 0x1a +#define DP_DUAL_MODE_FIRMWARE_MAJOR_REV 0x1b +#define DP_DUAL_MODE_FIRMWARE_MINOR_REV 0x1c +#define DP_DUAL_MODE_MAX_TMDS_CLOCK 0x1d +#define DP_DUAL_MODE_I2C_SPEED_CAP 0x1e +#define DP_DUAL_MODE_TMDS_OEN 0x20 +#define DP_DUAL_MODE_TMDS_DISABLE 0x01 +#define DP_DUAL_MODE_HDMI_PIN_CTRL 0x21 +#define DP_DUAL_MODE_CEC_ENABLE 0x01 +#define DP_DUAL_MODE_I2C_SPEED_CTRL 0x22 + +/* LSPCON specific registers, defined by MCA */ +#define DP_DUAL_MODE_LSPCON_MODE_CHANGE 0x40 +#define DP_DUAL_MODE_LSPCON_CURRENT_MODE 0x41 +#define DP_DUAL_MODE_LSPCON_MODE_PCON 0x1 + +struct drm_device; +struct i2c_adapter; + +ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter, + u8 offset, void *buffer, size_t size); +ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter, + u8 offset, const void *buffer, size_t size); + +/** + * enum drm_lspcon_mode + * @DRM_LSPCON_MODE_INVALID: No LSPCON. + * @DRM_LSPCON_MODE_LS: Level shifter mode of LSPCON + * which drives DP++ to HDMI 1.4 conversion. + * @DRM_LSPCON_MODE_PCON: Protocol converter mode of LSPCON + * which drives DP++ to HDMI 2.0 active conversion. + */ +enum drm_lspcon_mode { + DRM_LSPCON_MODE_INVALID, + DRM_LSPCON_MODE_LS, + DRM_LSPCON_MODE_PCON, +}; + +/** + * enum drm_dp_dual_mode_type - Type of the DP dual mode adaptor + * @DRM_DP_DUAL_MODE_NONE: No DP dual mode adaptor + * @DRM_DP_DUAL_MODE_UNKNOWN: Could be either none or type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_DVI: Type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_HDMI: Type 1 HDMI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_DVI: Type 2 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_HDMI: Type 2 HDMI adaptor + * @DRM_DP_DUAL_MODE_LSPCON: Level shifter / protocol converter + */ +enum drm_dp_dual_mode_type { + DRM_DP_DUAL_MODE_NONE, + DRM_DP_DUAL_MODE_UNKNOWN, + DRM_DP_DUAL_MODE_TYPE1_DVI, + DRM_DP_DUAL_MODE_TYPE1_HDMI, + DRM_DP_DUAL_MODE_TYPE2_DVI, + DRM_DP_DUAL_MODE_TYPE2_HDMI, + DRM_DP_DUAL_MODE_LSPCON, +}; + +enum drm_dp_dual_mode_type +drm_dp_dual_mode_detect(const struct drm_device *dev, struct i2c_adapter *adapter); +int drm_dp_dual_mode_max_tmds_clock(const struct drm_device *dev, enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter); +int drm_dp_dual_mode_get_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool *enabled); +int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool enable); +const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type); + +int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapter, + enum drm_lspcon_mode *current_mode); +int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapter, + enum drm_lspcon_mode reqd_mode); +#endif diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h new file mode 100644 index 000000000000..ab55453f2d2c --- /dev/null +++ b/include/drm/display/drm_dp_helper.h @@ -0,0 +1,766 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_HELPER_H_ +#define _DRM_DP_HELPER_H_ + +#include <linux/delay.h> +#include <linux/i2c.h> + +#include <drm/display/drm_dp.h> +#include <drm/drm_connector.h> + +struct drm_device; +struct drm_dp_aux; +struct drm_panel; + +bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); +u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); +u8 drm_dp_get_adjust_tx_ffe_preset(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane); + +int drm_dp_read_clock_recovery_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, bool uhbr); +int drm_dp_read_channel_eq_delay(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, bool uhbr); + +void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +void drm_dp_lttpr_link_train_clock_recovery_delay(void); +void drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +void drm_dp_lttpr_link_train_channel_eq_delay(const struct drm_dp_aux *aux, + const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); + +int drm_dp_128b132b_read_aux_rd_interval(struct drm_dp_aux *aux); +bool drm_dp_128b132b_lane_channel_eq_done(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_128b132b_lane_symbol_locked(const u8 link_status[DP_LINK_STATUS_SIZE], + int lane_count); +bool drm_dp_128b132b_eq_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]); +bool drm_dp_128b132b_cds_interlane_align_done(const u8 link_status[DP_LINK_STATUS_SIZE]); +bool drm_dp_128b132b_link_training_failed(const u8 link_status[DP_LINK_STATUS_SIZE]); + +u8 drm_dp_link_rate_to_bw_code(int link_rate); +int drm_dp_bw_code_to_link_rate(u8 link_bw); + +const char *drm_dp_phy_name(enum drm_dp_phy dp_phy); + +/** + * struct drm_dp_vsc_sdp - drm DP VSC SDP + * + * This structure represents a DP VSC SDP of drm + * It is based on DP 1.4 spec [Table 2-116: VSC SDP Header Bytes] and + * [Table 2-117: VSC SDP Payload for DB16 through DB18] + * + * @sdp_type: secondary-data packet type + * @revision: revision number + * @length: number of valid data bytes + * @pixelformat: pixel encoding format + * @colorimetry: colorimetry format + * @bpc: bit per color + * @dynamic_range: dynamic range information + * @content_type: CTA-861-G defines content types and expected processing by a sink device + */ +struct drm_dp_vsc_sdp { + unsigned char sdp_type; + unsigned char revision; + unsigned char length; + enum dp_pixelformat pixelformat; + enum dp_colorimetry colorimetry; + int bpc; + enum dp_dynamic_range dynamic_range; + enum dp_content_type content_type; +}; + +void drm_dp_vsc_sdp_log(const char *level, struct device *dev, + const struct drm_dp_vsc_sdp *vsc); + +int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]); + +static inline int +drm_dp_max_link_rate(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]); +} + +static inline u8 +drm_dp_max_lane_count(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK; +} + +static inline bool +drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 && + (dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP); +} + +static inline bool +drm_dp_fast_training_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 && + (dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING); +} + +static inline bool +drm_dp_tps3_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x12 && + dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED; +} + +static inline bool +drm_dp_max_downspread(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x11 || + dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5; +} + +static inline bool +drm_dp_tps4_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DPCD_REV] >= 0x14 && + dpcd[DP_MAX_DOWNSPREAD] & DP_TPS4_SUPPORTED; +} + +static inline u8 +drm_dp_training_pattern_mask(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return (dpcd[DP_DPCD_REV] >= 0x14) ? DP_TRAINING_PATTERN_MASK_1_4 : + DP_TRAINING_PATTERN_MASK; +} + +static inline bool +drm_dp_is_branch(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT; +} + +/* DP/eDP DSC support */ +u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE], + bool is_edp); +u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]); +int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE], + u8 dsc_bpc[3]); + +static inline bool +drm_dp_sink_supports_dsc(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + return dsc_dpcd[DP_DSC_SUPPORT - DP_DSC_SUPPORT] & + DP_DSC_DECOMPRESSION_IS_SUPPORTED; +} + +static inline u16 +drm_edp_dsc_sink_output_bpp(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + return dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_LOW - DP_DSC_SUPPORT] | + (dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_HI - DP_DSC_SUPPORT] & + DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK << + DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT); +} + +static inline u32 +drm_dp_dsc_sink_max_slice_width(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) +{ + /* Max Slicewidth = Number of Pixels * 320 */ + return dsc_dpcd[DP_DSC_MAX_SLICE_WIDTH - DP_DSC_SUPPORT] * + DP_DSC_SLICE_WIDTH_MULTIPLIER; +} + +/* Forward Error Correction Support on DP 1.4 */ +static inline bool +drm_dp_sink_supports_fec(const u8 fec_capable) +{ + return fec_capable & DP_FEC_CAPABLE; +} + +static inline bool +drm_dp_channel_coding_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_8B10B; +} + +static inline bool +drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_EDP_CONFIGURATION_CAP] & + DP_ALTERNATE_SCRAMBLER_RESET_CAP; +} + +/* Ignore MSA timing for Adaptive Sync support on DP 1.4 */ +static inline bool +drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_DOWN_STREAM_PORT_COUNT] & + DP_MSA_TIMING_PAR_IGNORED; +} + +/** + * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight support + * @edp_dpcd: The DPCD to check + * + * Note that currently this function will return %false for panels which support various DPCD + * backlight features but which require the brightness be set through PWM, and don't support setting + * the brightness level via the DPCD. + * + * Returns: %True if @edp_dpcd indicates that VESA backlight controls are supported, %false + * otherwise + */ +static inline bool +drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE]) +{ + return !!(edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP); +} + +/* + * DisplayPort AUX channel + */ + +/** + * struct drm_dp_aux_msg - DisplayPort AUX channel transaction + * @address: address of the (first) register to access + * @request: contains the type of transaction (see DP_AUX_* macros) + * @reply: upon completion, contains the reply type of the transaction + * @buffer: pointer to a transmission or reception buffer + * @size: size of @buffer + */ +struct drm_dp_aux_msg { + unsigned int address; + u8 request; + u8 reply; + void *buffer; + size_t size; +}; + +struct cec_adapter; +struct edid; +struct drm_connector; + +/** + * struct drm_dp_aux_cec - DisplayPort CEC-Tunneling-over-AUX + * @lock: mutex protecting this struct + * @adap: the CEC adapter for CEC-Tunneling-over-AUX support. + * @connector: the connector this CEC adapter is associated with + * @unregister_work: unregister the CEC adapter + */ +struct drm_dp_aux_cec { + struct mutex lock; + struct cec_adapter *adap; + struct drm_connector *connector; + struct delayed_work unregister_work; +}; + +/** + * struct drm_dp_aux - DisplayPort AUX channel + * + * An AUX channel can also be used to transport I2C messages to a sink. A + * typical application of that is to access an EDID that's present in the sink + * device. The @transfer() function can also be used to execute such + * transactions. The drm_dp_aux_register() function registers an I2C adapter + * that can be passed to drm_probe_ddc(). Upon removal, drivers should call + * drm_dp_aux_unregister() to remove the I2C adapter. The I2C adapter uses long + * transfers by default; if a partial response is received, the adapter will + * drop down to the size given by the partial response for this transaction + * only. + */ +struct drm_dp_aux { + /** + * @name: user-visible name of this AUX channel and the + * I2C-over-AUX adapter. + * + * It's also used to specify the name of the I2C adapter. If set + * to %NULL, dev_name() of @dev will be used. + */ + const char *name; + + /** + * @ddc: I2C adapter that can be used for I2C-over-AUX + * communication + */ + struct i2c_adapter ddc; + + /** + * @dev: pointer to struct device that is the parent for this + * AUX channel. + */ + struct device *dev; + + /** + * @drm_dev: pointer to the &drm_device that owns this AUX channel. + * Beware, this may be %NULL before drm_dp_aux_register() has been + * called. + * + * It should be set to the &drm_device that will be using this AUX + * channel as early as possible. For many graphics drivers this should + * happen before drm_dp_aux_init(), however it's perfectly fine to set + * this field later so long as it's assigned before calling + * drm_dp_aux_register(). + */ + struct drm_device *drm_dev; + + /** + * @crtc: backpointer to the crtc that is currently using this + * AUX channel + */ + struct drm_crtc *crtc; + + /** + * @hw_mutex: internal mutex used for locking transfers. + * + * Note that if the underlying hardware is shared among multiple + * channels, the driver needs to do additional locking to + * prevent concurrent access. + */ + struct mutex hw_mutex; + + /** + * @crc_work: worker that captures CRCs for each frame + */ + struct work_struct crc_work; + + /** + * @crc_count: counter of captured frame CRCs + */ + u8 crc_count; + + /** + * @transfer: transfers a message representing a single AUX + * transaction. + * + * This is a hardware-specific implementation of how + * transactions are executed that the drivers must provide. + * + * A pointer to a &drm_dp_aux_msg structure describing the + * transaction is passed into this function. Upon success, the + * implementation should return the number of payload bytes that + * were transferred, or a negative error-code on failure. + * + * Helpers will propagate these errors, with the exception of + * the %-EBUSY error, which causes a transaction to be retried. + * On a short, helpers will return %-EPROTO to make it simpler + * to check for failure. + * + * The @transfer() function must only modify the reply field of + * the &drm_dp_aux_msg structure. The retry logic and i2c + * helpers assume this is the case. + * + * Also note that this callback can be called no matter the + * state @dev is in and also no matter what state the panel is + * in. It's expected: + * + * - If the @dev providing the AUX bus is currently unpowered then + * it will power itself up for the transfer. + * + * - If we're on eDP (using a drm_panel) and the panel is not in a + * state where it can respond (it's not powered or it's in a + * low power state) then this function may return an error, but + * not crash. It's up to the caller of this code to make sure that + * the panel is powered on if getting an error back is not OK. If a + * drm_panel driver is initiating a DP AUX transfer it may power + * itself up however it wants. All other code should ensure that + * the pre_enable() bridge chain (which eventually calls the + * drm_panel prepare function) has powered the panel. + */ + ssize_t (*transfer)(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg); + + /** + * @wait_hpd_asserted: wait for HPD to be asserted + * + * This is mainly useful for eDP panels drivers to wait for an eDP + * panel to finish powering on. This is an optional function. + * + * This function will efficiently wait for the HPD signal to be + * asserted. The `wait_us` parameter that is passed in says that we + * know that the HPD signal is expected to be asserted within `wait_us` + * microseconds. This function could wait for longer than `wait_us` if + * the logic in the DP controller has a long debouncing time. The + * important thing is that if this function returns success that the + * DP controller is ready to send AUX transactions. + * + * This function returns 0 if HPD was asserted or -ETIMEDOUT if time + * expired and HPD wasn't asserted. This function should not print + * timeout errors to the log. + * + * The semantics of this function are designed to match the + * readx_poll_timeout() function. That means a `wait_us` of 0 means + * to wait forever. Like readx_poll_timeout(), this function may sleep. + * + * NOTE: this function specifically reports the state of the HPD pin + * that's associated with the DP AUX channel. This is different from + * the HPD concept in much of the rest of DRM which is more about + * physical presence of a display. For eDP, for instance, a display is + * assumed always present even if the HPD pin is deasserted. + */ + int (*wait_hpd_asserted)(struct drm_dp_aux *aux, unsigned long wait_us); + + /** + * @i2c_nack_count: Counts I2C NACKs, used for DP validation. + */ + unsigned i2c_nack_count; + /** + * @i2c_defer_count: Counts I2C DEFERs, used for DP validation. + */ + unsigned i2c_defer_count; + /** + * @cec: struct containing fields used for CEC-Tunneling-over-AUX. + */ + struct drm_dp_aux_cec cec; + /** + * @is_remote: Is this AUX CH actually using sideband messaging. + */ + bool is_remote; +}; + +int drm_dp_dpcd_probe(struct drm_dp_aux *aux, unsigned int offset); +ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size); +ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size); + +/** + * drm_dp_dpcd_readb() - read a single byte from the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to read + * @valuep: location where the value of the register will be stored + * + * Returns the number of bytes transferred (1) on success, or a negative + * error code on failure. + */ +static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, + unsigned int offset, u8 *valuep) +{ + return drm_dp_dpcd_read(aux, offset, valuep, 1); +} + +/** + * drm_dp_dpcd_writeb() - write a single byte to the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to write + * @value: value to write to the register + * + * Returns the number of bytes transferred (1) on success, or a negative + * error code on failure. + */ +static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, + unsigned int offset, u8 value) +{ + return drm_dp_dpcd_write(aux, offset, &value, 1); +} + +int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux, + u8 dpcd[DP_RECEIVER_CAP_SIZE]); + +int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, + u8 status[DP_LINK_STATUS_SIZE]); + +int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, + enum drm_dp_phy dp_phy, + u8 link_status[DP_LINK_STATUS_SIZE]); + +bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, + u8 real_edid_checksum); + +int drm_dp_read_downstream_info(struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS]); +bool drm_dp_downstream_is_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], u8 type); +bool drm_dp_downstream_is_tmds(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +bool drm_dp_downstream_420_passthrough(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +bool drm_dp_downstream_444_to_420_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +struct drm_display_mode *drm_dp_downstream_mode(struct drm_device *dev, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]); +void drm_dp_downstream_debug(struct seq_file *m, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid, + struct drm_dp_aux *aux); +enum drm_mode_subconnector +drm_dp_subconnector_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +void drm_dp_set_subconnector_property(struct drm_connector *connector, + enum drm_connector_status status, + const u8 *dpcd, + const u8 port_cap[4]); + +struct drm_dp_desc; +bool drm_dp_read_sink_count_cap(struct drm_connector *connector, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const struct drm_dp_desc *desc); +int drm_dp_read_sink_count(struct drm_dp_aux *aux); + +int drm_dp_read_lttpr_common_caps(struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + enum drm_dp_phy dp_phy, + u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); + +void drm_dp_remote_aux_init(struct drm_dp_aux *aux); +void drm_dp_aux_init(struct drm_dp_aux *aux); +int drm_dp_aux_register(struct drm_dp_aux *aux); +void drm_dp_aux_unregister(struct drm_dp_aux *aux); + +int drm_dp_start_crc(struct drm_dp_aux *aux, struct drm_crtc *crtc); +int drm_dp_stop_crc(struct drm_dp_aux *aux); + +struct drm_dp_dpcd_ident { + u8 oui[3]; + u8 device_id[6]; + u8 hw_rev; + u8 sw_major_rev; + u8 sw_minor_rev; +} __packed; + +/** + * struct drm_dp_desc - DP branch/sink device descriptor + * @ident: DP device identification from DPCD 0x400 (sink) or 0x500 (branch). + * @quirks: Quirks; use drm_dp_has_quirk() to query for the quirks. + */ +struct drm_dp_desc { + struct drm_dp_dpcd_ident ident; + u32 quirks; +}; + +int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, + bool is_branch); + +/** + * enum drm_dp_quirk - Display Port sink/branch device specific quirks + * + * Display Port sink and branch devices in the wild have a variety of bugs, try + * to collect them here. The quirks are shared, but it's up to the drivers to + * implement workarounds for them. + */ +enum drm_dp_quirk { + /** + * @DP_DPCD_QUIRK_CONSTANT_N: + * + * The device requires main link attributes Mvid and Nvid to be limited + * to 16 bits. So will give a constant value (0x8000) for compatability. + */ + DP_DPCD_QUIRK_CONSTANT_N, + /** + * @DP_DPCD_QUIRK_NO_PSR: + * + * The device does not support PSR even if reports that it supports or + * driver still need to implement proper handling for such device. + */ + DP_DPCD_QUIRK_NO_PSR, + /** + * @DP_DPCD_QUIRK_NO_SINK_COUNT: + * + * The device does not set SINK_COUNT to a non-zero value. + * The driver should ignore SINK_COUNT during detection. Note that + * drm_dp_read_sink_count_cap() automatically checks for this quirk. + */ + DP_DPCD_QUIRK_NO_SINK_COUNT, + /** + * @DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD: + * + * The device supports MST DSC despite not supporting Virtual DPCD. + * The DSC caps can be read from the physical aux instead. + */ + DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD, + /** + * @DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS: + * + * The device supports a link rate of 3.24 Gbps (multiplier 0xc) despite + * the DP_MAX_LINK_RATE register reporting a lower max multiplier. + */ + DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS, +}; + +/** + * drm_dp_has_quirk() - does the DP device have a specific quirk + * @desc: Device descriptor filled by drm_dp_read_desc() + * @quirk: Quirk to query for + * + * Return true if DP device identified by @desc has @quirk. + */ +static inline bool +drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) +{ + return desc->quirks & BIT(quirk); +} + +/** + * struct drm_edp_backlight_info - Probed eDP backlight info struct + * @pwmgen_bit_count: The pwmgen bit count + * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used for this backlight, if any + * @max: The maximum backlight level that may be set + * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register? + * @aux_enable: Does the panel support the AUX enable cap? + * @aux_set: Does the panel support setting the brightness through AUX? + * + * This structure contains various data about an eDP backlight, which can be populated by using + * drm_edp_backlight_init(). + */ +struct drm_edp_backlight_info { + u8 pwmgen_bit_count; + u8 pwm_freq_pre_divider; + u16 max; + + bool lsb_reg_used : 1; + bool aux_enable : 1; + bool aux_set : 1; +}; + +int +drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl, + u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE], + u16 *current_level, u8 *current_mode); +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl); + +#if IS_ENABLED(CONFIG_DRM_KMS_HELPER) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \ + (IS_MODULE(CONFIG_DRM_KMS_HELPER) && IS_MODULE(CONFIG_BACKLIGHT_CLASS_DEVICE))) + +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux); + +#else + +static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel, + struct drm_dp_aux *aux) +{ + return 0; +} + +#endif + +#ifdef CONFIG_DRM_DP_CEC +void drm_dp_cec_irq(struct drm_dp_aux *aux); +void drm_dp_cec_register_connector(struct drm_dp_aux *aux, + struct drm_connector *connector); +void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux); +void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid); +void drm_dp_cec_unset_edid(struct drm_dp_aux *aux); +#else +static inline void drm_dp_cec_irq(struct drm_dp_aux *aux) +{ +} + +static inline void +drm_dp_cec_register_connector(struct drm_dp_aux *aux, + struct drm_connector *connector) +{ +} + +static inline void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux) +{ +} + +static inline void drm_dp_cec_set_edid(struct drm_dp_aux *aux, + const struct edid *edid) +{ +} + +static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux) +{ +} + +#endif + +/** + * struct drm_dp_phy_test_params - DP Phy Compliance parameters + * @link_rate: Requested Link rate from DPCD 0x219 + * @num_lanes: Number of lanes requested by sing through DPCD 0x220 + * @phy_pattern: DP Phy test pattern from DPCD 0x248 + * @hbr2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B + * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259 + * @enhanced_frame_cap: flag for enhanced frame capability. + */ +struct drm_dp_phy_test_params { + int link_rate; + u8 num_lanes; + u8 phy_pattern; + u8 hbr2_reset[2]; + u8 custom80[10]; + bool enhanced_frame_cap; +}; + +int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, + struct drm_dp_phy_test_params *data); +int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux, + struct drm_dp_phy_test_params *data, u8 dp_rev); +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd); +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, + u8 frl_mode); +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, + u8 frl_type); +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux); + +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask); +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, + struct drm_connector *connector); +bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux); +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]); +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]); +bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], u8 color_spc); +int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc); + +#endif /* _DRM_DP_HELPER_H_ */ diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h new file mode 100644 index 000000000000..41fd8352ab65 --- /dev/null +++ b/include/drm/display/drm_dp_mst_helper.h @@ -0,0 +1,1007 @@ +/* + * Copyright © 2014 Red Hat. + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ +#ifndef _DRM_DP_MST_HELPER_H_ +#define _DRM_DP_MST_HELPER_H_ + +#include <linux/types.h> +#include <drm/display/drm_dp_helper.h> +#include <drm/drm_atomic.h> + +#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) +#include <linux/stackdepot.h> +#include <linux/timekeeping.h> + +enum drm_dp_mst_topology_ref_type { + DRM_DP_MST_TOPOLOGY_REF_GET, + DRM_DP_MST_TOPOLOGY_REF_PUT, +}; + +struct drm_dp_mst_topology_ref_history { + struct drm_dp_mst_topology_ref_entry { + enum drm_dp_mst_topology_ref_type type; + int count; + ktime_t ts_nsec; + depot_stack_handle_t backtrace; + } *entries; + int len; +}; +#endif /* IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) */ + +struct drm_dp_mst_branch; + +/** + * struct drm_dp_mst_port - MST port + * @port_num: port number + * @input: if this port is an input port. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @mcs: message capability status - DP 1.2 spec. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @ddps: DisplayPort Device Plug Status - DP 1.2. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @pdt: Peer Device Type. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @ldps: Legacy Device Plug Status. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @dpcd_rev: DPCD revision of device on this port. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @num_sdp_streams: Number of simultaneous streams. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @num_sdp_stream_sinks: Number of stream sinks. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @full_pbn: Max possible bandwidth for this port. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @next: link to next port on this branch device + * @aux: i2c aux transport to talk to device connected to this port, protected + * by &drm_dp_mst_topology_mgr.base.lock. + * @passthrough_aux: parent aux to which DSC pass-through requests should be + * sent, only set if DSC pass-through is possible. + * @parent: branch device parent of this port + * @vcpi: Virtual Channel Payload info for this port. + * @connector: DRM connector this port is connected to. Protected by + * &drm_dp_mst_topology_mgr.base.lock. + * @mgr: topology manager this port lives under. + * + * This structure represents an MST port endpoint on a device somewhere + * in the MST topology. + */ +struct drm_dp_mst_port { + /** + * @topology_kref: refcount for this port's lifetime in the topology, + * only the DP MST helpers should need to touch this + */ + struct kref topology_kref; + + /** + * @malloc_kref: refcount for the memory allocation containing this + * structure. See drm_dp_mst_get_port_malloc() and + * drm_dp_mst_put_port_malloc(). + */ + struct kref malloc_kref; + +#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) + /** + * @topology_ref_history: A history of each topology + * reference/dereference. See CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS. + */ + struct drm_dp_mst_topology_ref_history topology_ref_history; +#endif + + u8 port_num; + bool input; + bool mcs; + bool ddps; + u8 pdt; + bool ldps; + u8 dpcd_rev; + u8 num_sdp_streams; + u8 num_sdp_stream_sinks; + uint16_t full_pbn; + struct list_head next; + /** + * @mstb: the branch device connected to this port, if there is one. + * This should be considered protected for reading by + * &drm_dp_mst_topology_mgr.lock. There are two exceptions to this: + * &drm_dp_mst_topology_mgr.up_req_work and + * &drm_dp_mst_topology_mgr.work, which do not grab + * &drm_dp_mst_topology_mgr.lock during reads but are the only + * updaters of this list and are protected from writing concurrently + * by &drm_dp_mst_topology_mgr.probe_lock. + */ + struct drm_dp_mst_branch *mstb; + struct drm_dp_aux aux; /* i2c bus for this port? */ + struct drm_dp_aux *passthrough_aux; + struct drm_dp_mst_branch *parent; + + struct drm_connector *connector; + struct drm_dp_mst_topology_mgr *mgr; + + /** + * @cached_edid: for DP logical ports - make tiling work by ensuring + * that the EDID for all connectors is read immediately. + */ + struct edid *cached_edid; + /** + * @has_audio: Tracks whether the sink connector to this port is + * audio-capable. + */ + bool has_audio; + + /** + * @fec_capable: bool indicating if FEC can be supported up to that + * point in the MST topology. + */ + bool fec_capable; +}; + +/* sideband msg header - not bit struct */ +struct drm_dp_sideband_msg_hdr { + u8 lct; + u8 lcr; + u8 rad[8]; + bool broadcast; + bool path_msg; + u8 msg_len; + bool somt; + bool eomt; + bool seqno; +}; + +struct drm_dp_sideband_msg_rx { + u8 chunk[48]; + u8 msg[256]; + u8 curchunk_len; + u8 curchunk_idx; /* chunk we are parsing now */ + u8 curchunk_hdrlen; + u8 curlen; /* total length of the msg */ + bool have_somt; + bool have_eomt; + struct drm_dp_sideband_msg_hdr initial_hdr; +}; + +/** + * struct drm_dp_mst_branch - MST branch device. + * @rad: Relative Address to talk to this branch device. + * @lct: Link count total to talk to this branch device. + * @num_ports: number of ports on the branch. + * @port_parent: pointer to the port parent, NULL if toplevel. + * @mgr: topology manager for this branch device. + * @link_address_sent: if a link address message has been sent to this device yet. + * @guid: guid for DP 1.2 branch device. port under this branch can be + * identified by port #. + * + * This structure represents an MST branch device, there is one + * primary branch device at the root, along with any other branches connected + * to downstream port of parent branches. + */ +struct drm_dp_mst_branch { + /** + * @topology_kref: refcount for this branch device's lifetime in the + * topology, only the DP MST helpers should need to touch this + */ + struct kref topology_kref; + + /** + * @malloc_kref: refcount for the memory allocation containing this + * structure. See drm_dp_mst_get_mstb_malloc() and + * drm_dp_mst_put_mstb_malloc(). + */ + struct kref malloc_kref; + +#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) + /** + * @topology_ref_history: A history of each topology + * reference/dereference. See CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS. + */ + struct drm_dp_mst_topology_ref_history topology_ref_history; +#endif + + /** + * @destroy_next: linked-list entry used by + * drm_dp_delayed_destroy_work() + */ + struct list_head destroy_next; + + u8 rad[8]; + u8 lct; + int num_ports; + + /** + * @ports: the list of ports on this branch device. This should be + * considered protected for reading by &drm_dp_mst_topology_mgr.lock. + * There are two exceptions to this: + * &drm_dp_mst_topology_mgr.up_req_work and + * &drm_dp_mst_topology_mgr.work, which do not grab + * &drm_dp_mst_topology_mgr.lock during reads but are the only + * updaters of this list and are protected from updating the list + * concurrently by @drm_dp_mst_topology_mgr.probe_lock + */ + struct list_head ports; + + struct drm_dp_mst_port *port_parent; + struct drm_dp_mst_topology_mgr *mgr; + + bool link_address_sent; + + /* global unique identifier to identify branch devices */ + u8 guid[16]; +}; + + +struct drm_dp_nak_reply { + u8 guid[16]; + u8 reason; + u8 nak_data; +}; + +struct drm_dp_link_address_ack_reply { + u8 guid[16]; + u8 nports; + struct drm_dp_link_addr_reply_port { + bool input_port; + u8 peer_device_type; + u8 port_number; + bool mcs; + bool ddps; + bool legacy_device_plug_status; + u8 dpcd_revision; + u8 peer_guid[16]; + u8 num_sdp_streams; + u8 num_sdp_stream_sinks; + } ports[16]; +}; + +struct drm_dp_remote_dpcd_read_ack_reply { + u8 port_number; + u8 num_bytes; + u8 bytes[255]; +}; + +struct drm_dp_remote_dpcd_write_ack_reply { + u8 port_number; +}; + +struct drm_dp_remote_dpcd_write_nak_reply { + u8 port_number; + u8 reason; + u8 bytes_written_before_failure; +}; + +struct drm_dp_remote_i2c_read_ack_reply { + u8 port_number; + u8 num_bytes; + u8 bytes[255]; +}; + +struct drm_dp_remote_i2c_read_nak_reply { + u8 port_number; + u8 nak_reason; + u8 i2c_nak_transaction; +}; + +struct drm_dp_remote_i2c_write_ack_reply { + u8 port_number; +}; + +struct drm_dp_query_stream_enc_status_ack_reply { + /* Bit[23:16]- Stream Id */ + u8 stream_id; + + /* Bit[15]- Signed */ + bool reply_signed; + + /* Bit[10:8]- Stream Output Sink Type */ + bool unauthorizable_device_present; + bool legacy_device_present; + bool query_capable_device_present; + + /* Bit[12:11]- Stream Output CP Type */ + bool hdcp_1x_device_present; + bool hdcp_2x_device_present; + + /* Bit[4]- Stream Authentication */ + bool auth_completed; + + /* Bit[3]- Stream Encryption */ + bool encryption_enabled; + + /* Bit[2]- Stream Repeater Function Present */ + bool repeater_present; + + /* Bit[1:0]- Stream State */ + u8 state; +}; + +#define DRM_DP_MAX_SDP_STREAMS 16 +struct drm_dp_allocate_payload { + u8 port_number; + u8 number_sdp_streams; + u8 vcpi; + u16 pbn; + u8 sdp_stream_sink[DRM_DP_MAX_SDP_STREAMS]; +}; + +struct drm_dp_allocate_payload_ack_reply { + u8 port_number; + u8 vcpi; + u16 allocated_pbn; +}; + +struct drm_dp_connection_status_notify { + u8 guid[16]; + u8 port_number; + bool legacy_device_plug_status; + bool displayport_device_plug_status; + bool message_capability_status; + bool input_port; + u8 peer_device_type; +}; + +struct drm_dp_remote_dpcd_read { + u8 port_number; + u32 dpcd_address; + u8 num_bytes; +}; + +struct drm_dp_remote_dpcd_write { + u8 port_number; + u32 dpcd_address; + u8 num_bytes; + u8 *bytes; +}; + +#define DP_REMOTE_I2C_READ_MAX_TRANSACTIONS 4 +struct drm_dp_remote_i2c_read { + u8 num_transactions; + u8 port_number; + struct drm_dp_remote_i2c_read_tx { + u8 i2c_dev_id; + u8 num_bytes; + u8 *bytes; + u8 no_stop_bit; + u8 i2c_transaction_delay; + } transactions[DP_REMOTE_I2C_READ_MAX_TRANSACTIONS]; + u8 read_i2c_device_id; + u8 num_bytes_read; +}; + +struct drm_dp_remote_i2c_write { + u8 port_number; + u8 write_i2c_device_id; + u8 num_bytes; + u8 *bytes; +}; + +struct drm_dp_query_stream_enc_status { + u8 stream_id; + u8 client_id[7]; /* 56-bit nonce */ + u8 stream_event; + bool valid_stream_event; + u8 stream_behavior; + u8 valid_stream_behavior; +}; + +/* this covers ENUM_RESOURCES, POWER_DOWN_PHY, POWER_UP_PHY */ +struct drm_dp_port_number_req { + u8 port_number; +}; + +struct drm_dp_enum_path_resources_ack_reply { + u8 port_number; + bool fec_capable; + u16 full_payload_bw_number; + u16 avail_payload_bw_number; +}; + +/* covers POWER_DOWN_PHY, POWER_UP_PHY */ +struct drm_dp_port_number_rep { + u8 port_number; +}; + +struct drm_dp_query_payload { + u8 port_number; + u8 vcpi; +}; + +struct drm_dp_resource_status_notify { + u8 port_number; + u8 guid[16]; + u16 available_pbn; +}; + +struct drm_dp_query_payload_ack_reply { + u8 port_number; + u16 allocated_pbn; +}; + +struct drm_dp_sideband_msg_req_body { + u8 req_type; + union ack_req { + struct drm_dp_connection_status_notify conn_stat; + struct drm_dp_port_number_req port_num; + struct drm_dp_resource_status_notify resource_stat; + + struct drm_dp_query_payload query_payload; + struct drm_dp_allocate_payload allocate_payload; + + struct drm_dp_remote_dpcd_read dpcd_read; + struct drm_dp_remote_dpcd_write dpcd_write; + + struct drm_dp_remote_i2c_read i2c_read; + struct drm_dp_remote_i2c_write i2c_write; + + struct drm_dp_query_stream_enc_status enc_status; + } u; +}; + +struct drm_dp_sideband_msg_reply_body { + u8 reply_type; + u8 req_type; + union ack_replies { + struct drm_dp_nak_reply nak; + struct drm_dp_link_address_ack_reply link_addr; + struct drm_dp_port_number_rep port_number; + + struct drm_dp_enum_path_resources_ack_reply path_resources; + struct drm_dp_allocate_payload_ack_reply allocate_payload; + struct drm_dp_query_payload_ack_reply query_payload; + + struct drm_dp_remote_dpcd_read_ack_reply remote_dpcd_read_ack; + struct drm_dp_remote_dpcd_write_ack_reply remote_dpcd_write_ack; + struct drm_dp_remote_dpcd_write_nak_reply remote_dpcd_write_nack; + + struct drm_dp_remote_i2c_read_ack_reply remote_i2c_read_ack; + struct drm_dp_remote_i2c_read_nak_reply remote_i2c_read_nack; + struct drm_dp_remote_i2c_write_ack_reply remote_i2c_write_ack; + + struct drm_dp_query_stream_enc_status_ack_reply enc_status; + } u; +}; + +/* msg is queued to be put into a slot */ +#define DRM_DP_SIDEBAND_TX_QUEUED 0 +/* msg has started transmitting on a slot - still on msgq */ +#define DRM_DP_SIDEBAND_TX_START_SEND 1 +/* msg has finished transmitting on a slot - removed from msgq only in slot */ +#define DRM_DP_SIDEBAND_TX_SENT 2 +/* msg has received a response - removed from slot */ +#define DRM_DP_SIDEBAND_TX_RX 3 +#define DRM_DP_SIDEBAND_TX_TIMEOUT 4 + +struct drm_dp_sideband_msg_tx { + u8 msg[256]; + u8 chunk[48]; + u8 cur_offset; + u8 cur_len; + struct drm_dp_mst_branch *dst; + struct list_head next; + int seqno; + int state; + bool path_msg; + struct drm_dp_sideband_msg_reply_body reply; +}; + +/* sideband msg handler */ +struct drm_dp_mst_topology_mgr; +struct drm_dp_mst_topology_cbs { + /* create a connector for a port */ + struct drm_connector *(*add_connector)(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, const char *path); + /* + * Checks for any pending MST interrupts, passing them to MST core for + * processing, the same way an HPD IRQ pulse handler would do this. + * If provided MST core calls this callback from a poll-waiting loop + * when waiting for MST down message replies. The driver is expected + * to guard against a race between this callback and the driver's HPD + * IRQ pulse handler. + */ + void (*poll_hpd_irq)(struct drm_dp_mst_topology_mgr *mgr); +}; + +#define to_dp_mst_topology_state(x) container_of(x, struct drm_dp_mst_topology_state, base) + +/** + * struct drm_dp_mst_atomic_payload - Atomic state struct for an MST payload + * + * The primary atomic state structure for a given MST payload. Stores information like current + * bandwidth allocation, intended action for this payload, etc. + */ +struct drm_dp_mst_atomic_payload { + /** @port: The MST port assigned to this payload */ + struct drm_dp_mst_port *port; + + /** + * @vc_start_slot: The time slot that this payload starts on. Because payload start slots + * can't be determined ahead of time, the contents of this value are UNDEFINED at atomic + * check time. This shouldn't usually matter, as the start slot should never be relevant for + * atomic state computations. + * + * Since this value is determined at commit time instead of check time, this value is + * protected by the MST helpers ensuring that async commits operating on the given topology + * never run in parallel. In the event that a driver does need to read this value (e.g. to + * inform hardware of the starting timeslot for a payload), the driver may either: + * + * * Read this field during the atomic commit after + * drm_dp_mst_atomic_wait_for_dependencies() has been called, which will ensure the + * previous MST states payload start slots have been copied over to the new state. Note + * that a new start slot won't be assigned/removed from this payload until + * drm_dp_add_payload_part1()/drm_dp_remove_payload() have been called. + * * Acquire the MST modesetting lock, and then wait for any pending MST-related commits to + * get committed to hardware by calling drm_crtc_commit_wait() on each of the + * &drm_crtc_commit structs in &drm_dp_mst_topology_state.commit_deps. + * + * If neither of the two above solutions suffice (e.g. the driver needs to read the start + * slot in the middle of an atomic commit without waiting for some reason), then drivers + * should cache this value themselves after changing payloads. + */ + s8 vc_start_slot; + + /** @vcpi: The Virtual Channel Payload Identifier */ + u8 vcpi; + /** + * @time_slots: + * The number of timeslots allocated to this payload from the source DP Tx to + * the immediate downstream DP Rx + */ + int time_slots; + /** @pbn: The payload bandwidth for this payload */ + int pbn; + + /** @delete: Whether or not we intend to delete this payload during this atomic commit */ + bool delete : 1; + /** @dsc_enabled: Whether or not this payload has DSC enabled */ + bool dsc_enabled : 1; + + /** @next: The list node for this payload */ + struct list_head next; +}; + +/** + * struct drm_dp_mst_topology_state - DisplayPort MST topology atomic state + * + * This struct represents the atomic state of the toplevel DisplayPort MST manager + */ +struct drm_dp_mst_topology_state { + /** @base: Base private state for atomic */ + struct drm_private_state base; + + /** @mgr: The topology manager */ + struct drm_dp_mst_topology_mgr *mgr; + + /** + * @pending_crtc_mask: A bitmask of all CRTCs this topology state touches, drivers may + * modify this to add additional dependencies if needed. + */ + u32 pending_crtc_mask; + /** + * @commit_deps: A list of all CRTC commits affecting this topology, this field isn't + * populated until drm_dp_mst_atomic_wait_for_dependencies() is called. + */ + struct drm_crtc_commit **commit_deps; + /** @num_commit_deps: The number of CRTC commits in @commit_deps */ + size_t num_commit_deps; + + /** @payload_mask: A bitmask of allocated VCPIs, used for VCPI assignments */ + u32 payload_mask; + /** @payloads: The list of payloads being created/destroyed in this state */ + struct list_head payloads; + + /** @total_avail_slots: The total number of slots this topology can handle (63 or 64) */ + u8 total_avail_slots; + /** @start_slot: The first usable time slot in this topology (1 or 0) */ + u8 start_slot; + + /** + * @pbn_div: The current PBN divisor for this topology. The driver is expected to fill this + * out itself. + */ + int pbn_div; +}; + +#define to_dp_mst_topology_mgr(x) container_of(x, struct drm_dp_mst_topology_mgr, base) + +/** + * struct drm_dp_mst_topology_mgr - DisplayPort MST manager + * + * This struct represents the toplevel displayport MST topology manager. + * There should be one instance of this for every MST capable DP connector + * on the GPU. + */ +struct drm_dp_mst_topology_mgr { + /** + * @base: Base private object for atomic + */ + struct drm_private_obj base; + + /** + * @dev: device pointer for adding i2c devices etc. + */ + struct drm_device *dev; + /** + * @cbs: callbacks for connector addition and destruction. + */ + const struct drm_dp_mst_topology_cbs *cbs; + /** + * @max_dpcd_transaction_bytes: maximum number of bytes to read/write + * in one go. + */ + int max_dpcd_transaction_bytes; + /** + * @aux: AUX channel for the DP MST connector this topolgy mgr is + * controlling. + */ + struct drm_dp_aux *aux; + /** + * @max_payloads: maximum number of payloads the GPU can generate. + */ + int max_payloads; + /** + * @conn_base_id: DRM connector ID this mgr is connected to. Only used + * to build the MST connector path value. + */ + int conn_base_id; + + /** + * @up_req_recv: Message receiver state for up requests. + */ + struct drm_dp_sideband_msg_rx up_req_recv; + + /** + * @down_rep_recv: Message receiver state for replies to down + * requests. + */ + struct drm_dp_sideband_msg_rx down_rep_recv; + + /** + * @lock: protects @mst_state, @mst_primary, @dpcd, and + * @payload_id_table_cleared. + */ + struct mutex lock; + + /** + * @probe_lock: Prevents @work and @up_req_work, the only writers of + * &drm_dp_mst_port.mstb and &drm_dp_mst_branch.ports, from racing + * while they update the topology. + */ + struct mutex probe_lock; + + /** + * @mst_state: If this manager is enabled for an MST capable port. False + * if no MST sink/branch devices is connected. + */ + bool mst_state : 1; + + /** + * @payload_id_table_cleared: Whether or not we've cleared the payload + * ID table for @mst_primary. Protected by @lock. + */ + bool payload_id_table_cleared : 1; + + /** + * @payload_count: The number of currently active payloads in hardware. This value is only + * intended to be used internally by MST helpers for payload tracking, and is only safe to + * read/write from the atomic commit (not check) context. + */ + u8 payload_count; + + /** + * @next_start_slot: The starting timeslot to use for new VC payloads. This value is used + * internally by MST helpers for payload tracking, and is only safe to read/write from the + * atomic commit (not check) context. + */ + u8 next_start_slot; + + /** + * @mst_primary: Pointer to the primary/first branch device. + */ + struct drm_dp_mst_branch *mst_primary; + + /** + * @dpcd: Cache of DPCD for primary port. + */ + u8 dpcd[DP_RECEIVER_CAP_SIZE]; + /** + * @sink_count: Sink count from DEVICE_SERVICE_IRQ_VECTOR_ESI0. + */ + u8 sink_count; + + /** + * @funcs: Atomic helper callbacks + */ + const struct drm_private_state_funcs *funcs; + + /** + * @qlock: protects @tx_msg_downq and &drm_dp_sideband_msg_tx.state + */ + struct mutex qlock; + + /** + * @tx_msg_downq: List of pending down requests + */ + struct list_head tx_msg_downq; + + /** + * @tx_waitq: Wait to queue stall for the tx worker. + */ + wait_queue_head_t tx_waitq; + /** + * @work: Probe work. + */ + struct work_struct work; + /** + * @tx_work: Sideband transmit worker. This can nest within the main + * @work worker for each transaction @work launches. + */ + struct work_struct tx_work; + + /** + * @destroy_port_list: List of to be destroyed connectors. + */ + struct list_head destroy_port_list; + /** + * @destroy_branch_device_list: List of to be destroyed branch + * devices. + */ + struct list_head destroy_branch_device_list; + /** + * @delayed_destroy_lock: Protects @destroy_port_list and + * @destroy_branch_device_list. + */ + struct mutex delayed_destroy_lock; + + /** + * @delayed_destroy_wq: Workqueue used for delayed_destroy_work items. + * A dedicated WQ makes it possible to drain any requeued work items + * on it. + */ + struct workqueue_struct *delayed_destroy_wq; + + /** + * @delayed_destroy_work: Work item to destroy MST port and branch + * devices, needed to avoid locking inversion. + */ + struct work_struct delayed_destroy_work; + + /** + * @up_req_list: List of pending up requests from the topology that + * need to be processed, in chronological order. + */ + struct list_head up_req_list; + /** + * @up_req_lock: Protects @up_req_list + */ + struct mutex up_req_lock; + /** + * @up_req_work: Work item to process up requests received from the + * topology. Needed to avoid blocking hotplug handling and sideband + * transmissions. + */ + struct work_struct up_req_work; + +#if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) + /** + * @topology_ref_history_lock: protects + * &drm_dp_mst_port.topology_ref_history and + * &drm_dp_mst_branch.topology_ref_history. + */ + struct mutex topology_ref_history_lock; +#endif +}; + +int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr, + struct drm_device *dev, struct drm_dp_aux *aux, + int max_dpcd_transaction_bytes, + int max_payloads, int conn_base_id); + +void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr); + +bool drm_dp_read_mst_cap(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state); + +int drm_dp_mst_hpd_irq(struct drm_dp_mst_topology_mgr *mgr, u8 *esi, bool *handled); + + +int +drm_dp_mst_detect_port(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_port *port); + +struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port); + +int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr, + int link_rate, int link_lane_count); + +int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc); + +void drm_dp_mst_update_slots(struct drm_dp_mst_topology_state *mst_state, uint8_t link_encoding_cap); + +int drm_dp_add_payload_part1(struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_topology_state *mst_state, + struct drm_dp_mst_atomic_payload *payload); +int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr, + struct drm_atomic_state *state, + struct drm_dp_mst_atomic_payload *payload); +void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_topology_state *mst_state, + struct drm_dp_mst_atomic_payload *payload); + +int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr); + +void drm_dp_mst_dump_topology(struct seq_file *m, + struct drm_dp_mst_topology_mgr *mgr); + +void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr); +int __must_check +drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr, + bool sync); + +ssize_t drm_dp_mst_dpcd_read(struct drm_dp_aux *aux, + unsigned int offset, void *buffer, size_t size); +ssize_t drm_dp_mst_dpcd_write(struct drm_dp_aux *aux, + unsigned int offset, void *buffer, size_t size); + +int drm_dp_mst_connector_late_register(struct drm_connector *connector, + struct drm_dp_mst_port *port); +void drm_dp_mst_connector_early_unregister(struct drm_connector *connector, + struct drm_dp_mst_port *port); + +struct drm_dp_mst_topology_state * +drm_atomic_get_mst_topology_state(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr); +struct drm_dp_mst_topology_state * +drm_atomic_get_new_mst_topology_state(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr); +struct drm_dp_mst_atomic_payload * +drm_atomic_get_mst_payload_state(struct drm_dp_mst_topology_state *state, + struct drm_dp_mst_port *port); +int __must_check +drm_dp_atomic_find_time_slots(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_port *port, int pbn); +int drm_dp_mst_atomic_enable_dsc(struct drm_atomic_state *state, + struct drm_dp_mst_port *port, + int pbn, bool enable); +int __must_check +drm_dp_mst_add_affected_dsc_crtcs(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr); +int __must_check +drm_dp_atomic_release_time_slots(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_port *port); +void drm_dp_mst_atomic_wait_for_dependencies(struct drm_atomic_state *state); +int __must_check drm_dp_mst_atomic_setup_commit(struct drm_atomic_state *state); +int drm_dp_send_power_updown_phy(struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_port *port, bool power_up); +int drm_dp_send_query_stream_enc_status(struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_port *port, + struct drm_dp_query_stream_enc_status_ack_reply *status); +int __must_check drm_dp_mst_atomic_check(struct drm_atomic_state *state); +int __must_check drm_dp_mst_root_conn_atomic_check(struct drm_connector_state *new_conn_state, + struct drm_dp_mst_topology_mgr *mgr); + +void drm_dp_mst_get_port_malloc(struct drm_dp_mst_port *port); +void drm_dp_mst_put_port_malloc(struct drm_dp_mst_port *port); + +struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port); + +static inline struct drm_dp_mst_topology_state * +to_drm_dp_mst_topology_state(struct drm_private_state *state) +{ + return container_of(state, struct drm_dp_mst_topology_state, base); +} + +extern const struct drm_private_state_funcs drm_dp_mst_topology_state_funcs; + +/** + * __drm_dp_mst_state_iter_get - private atomic state iterator function for + * macro-internal use + * @state: &struct drm_atomic_state pointer + * @mgr: pointer to the &struct drm_dp_mst_topology_mgr iteration cursor + * @old_state: optional pointer to the old &struct drm_dp_mst_topology_state + * iteration cursor + * @new_state: optional pointer to the new &struct drm_dp_mst_topology_state + * iteration cursor + * @i: int iteration cursor, for macro-internal use + * + * Used by for_each_oldnew_mst_mgr_in_state(), + * for_each_old_mst_mgr_in_state(), and for_each_new_mst_mgr_in_state(). Don't + * call this directly. + * + * Returns: + * True if the current &struct drm_private_obj is a &struct + * drm_dp_mst_topology_mgr, false otherwise. + */ +static inline bool +__drm_dp_mst_state_iter_get(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr **mgr, + struct drm_dp_mst_topology_state **old_state, + struct drm_dp_mst_topology_state **new_state, + int i) +{ + struct __drm_private_objs_state *objs_state = &state->private_objs[i]; + + if (objs_state->ptr->funcs != &drm_dp_mst_topology_state_funcs) + return false; + + *mgr = to_dp_mst_topology_mgr(objs_state->ptr); + if (old_state) + *old_state = to_dp_mst_topology_state(objs_state->old_state); + if (new_state) + *new_state = to_dp_mst_topology_state(objs_state->new_state); + + return true; +} + +/** + * for_each_oldnew_mst_mgr_in_state - iterate over all DP MST topology + * managers in an atomic update + * @__state: &struct drm_atomic_state pointer + * @mgr: &struct drm_dp_mst_topology_mgr iteration cursor + * @old_state: &struct drm_dp_mst_topology_state iteration cursor for the old + * state + * @new_state: &struct drm_dp_mst_topology_state iteration cursor for the new + * state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all DRM DP MST topology managers in an atomic update, + * tracking both old and new state. This is useful in places where the state + * delta needs to be considered, for example in atomic check functions. + */ +#define for_each_oldnew_mst_mgr_in_state(__state, mgr, old_state, new_state, __i) \ + for ((__i) = 0; (__i) < (__state)->num_private_objs; (__i)++) \ + for_each_if(__drm_dp_mst_state_iter_get((__state), &(mgr), &(old_state), &(new_state), (__i))) + +/** + * for_each_old_mst_mgr_in_state - iterate over all DP MST topology managers + * in an atomic update + * @__state: &struct drm_atomic_state pointer + * @mgr: &struct drm_dp_mst_topology_mgr iteration cursor + * @old_state: &struct drm_dp_mst_topology_state iteration cursor for the old + * state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all DRM DP MST topology managers in an atomic update, + * tracking only the old state. This is useful in disable functions, where we + * need the old state the hardware is still in. + */ +#define for_each_old_mst_mgr_in_state(__state, mgr, old_state, __i) \ + for ((__i) = 0; (__i) < (__state)->num_private_objs; (__i)++) \ + for_each_if(__drm_dp_mst_state_iter_get((__state), &(mgr), &(old_state), NULL, (__i))) + +/** + * for_each_new_mst_mgr_in_state - iterate over all DP MST topology managers + * in an atomic update + * @__state: &struct drm_atomic_state pointer + * @mgr: &struct drm_dp_mst_topology_mgr iteration cursor + * @new_state: &struct drm_dp_mst_topology_state iteration cursor for the new + * state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all DRM DP MST topology managers in an atomic update, + * tracking only the new state. This is useful in enable functions, where we + * need the new state the hardware should be in when the atomic commit + * operation has completed. + */ +#define for_each_new_mst_mgr_in_state(__state, mgr, new_state, __i) \ + for ((__i) = 0; (__i) < (__state)->num_private_objs; (__i)++) \ + for_each_if(__drm_dp_mst_state_iter_get((__state), &(mgr), NULL, &(new_state), (__i))) + +#endif diff --git a/include/drm/display/drm_dsc.h b/include/drm/display/drm_dsc.h new file mode 100644 index 000000000000..bc90273d06a6 --- /dev/null +++ b/include/drm/display/drm_dsc.h @@ -0,0 +1,605 @@ +/* SPDX-License-Identifier: MIT + * Copyright (C) 2018 Intel Corp. + * + * Authors: + * Manasi Navare <manasi.d.navare@intel.com> + */ + +#ifndef DRM_DSC_H_ +#define DRM_DSC_H_ + +#include <drm/display/drm_dp.h> + +/* VESA Display Stream Compression DSC 1.2 constants */ +#define DSC_NUM_BUF_RANGES 15 +#define DSC_MUX_WORD_SIZE_8_10_BPC 48 +#define DSC_MUX_WORD_SIZE_12_BPC 64 +#define DSC_RC_PIXELS_PER_GROUP 3 +#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095 +#define DSC_RANGE_BPG_OFFSET_MASK 0x3f + +/* DSC Rate Control Constants */ +#define DSC_RC_MODEL_SIZE_CONST 8192 +#define DSC_RC_EDGE_FACTOR_CONST 6 +#define DSC_RC_TGT_OFFSET_HI_CONST 3 +#define DSC_RC_TGT_OFFSET_LO_CONST 3 + +/* DSC PPS constants and macros */ +#define DSC_PPS_VERSION_MAJOR_SHIFT 4 +#define DSC_PPS_BPC_SHIFT 4 +#define DSC_PPS_MSB_SHIFT 8 +#define DSC_PPS_LSB_MASK (0xFF << 0) +#define DSC_PPS_BPP_HIGH_MASK (0x3 << 8) +#define DSC_PPS_VBR_EN_SHIFT 2 +#define DSC_PPS_SIMPLE422_SHIFT 3 +#define DSC_PPS_CONVERT_RGB_SHIFT 4 +#define DSC_PPS_BLOCK_PRED_EN_SHIFT 5 +#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK (0x3 << 8) +#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK (0xF << 8) +#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT 4 +#define DSC_PPS_RC_RANGE_MINQP_SHIFT 11 +#define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6 +#define DSC_PPS_NATIVE_420_SHIFT 1 +#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16 +#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0 +#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13 + +/** + * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters + * + * This defines different rate control parameters used by the DSC engine + * to compress the frame. + */ +struct drm_dsc_rc_range_parameters { + /** + * @range_min_qp: Min Quantization Parameters allowed for this range + */ + u8 range_min_qp; + /** + * @range_max_qp: Max Quantization Parameters allowed for this range + */ + u8 range_max_qp; + /** + * @range_bpg_offset: + * Bits/group offset to apply to target for this group + */ + u8 range_bpg_offset; +}; + +/** + * struct drm_dsc_config - Parameters required to configure DSC + * + * Driver populates this structure with all the parameters required + * to configure the display stream compression on the source. + */ +struct drm_dsc_config { + /** + * @line_buf_depth: + * Bits per component for previous reconstructed line buffer + */ + u8 line_buf_depth; + /** + * @bits_per_component: Bits per component to code (8/10/12) + */ + u8 bits_per_component; + /** + * @convert_rgb: + * Flag to indicate if RGB - YCoCg conversion is needed + * True if RGB input, False if YCoCg input + */ + bool convert_rgb; + /** + * @slice_count: Number fo slices per line used by the DSC encoder + */ + u8 slice_count; + /** + * @slice_width: Width of each slice in pixels + */ + u16 slice_width; + /** + * @slice_height: Slice height in pixels + */ + u16 slice_height; + /** + * @simple_422: True if simple 4_2_2 mode is enabled else False + */ + bool simple_422; + /** + * @pic_width: Width of the input display frame in pixels + */ + u16 pic_width; + /** + * @pic_height: Vertical height of the input display frame + */ + u16 pic_height; + /** + * @rc_tgt_offset_high: + * Offset to bits/group used by RC to determine QP adjustment + */ + u8 rc_tgt_offset_high; + /** + * @rc_tgt_offset_low: + * Offset to bits/group used by RC to determine QP adjustment + */ + u8 rc_tgt_offset_low; + /** + * @bits_per_pixel: + * Target bits per pixel with 4 fractional bits, bits_per_pixel << 4 + */ + u16 bits_per_pixel; + /** + * @rc_edge_factor: + * Factor to determine if an edge is present based on the bits produced + */ + u8 rc_edge_factor; + /** + * @rc_quant_incr_limit1: + * Slow down incrementing once the range reaches this value + */ + u8 rc_quant_incr_limit1; + /** + * @rc_quant_incr_limit0: + * Slow down incrementing once the range reaches this value + */ + u8 rc_quant_incr_limit0; + /** + * @initial_xmit_delay: + * Number of pixels to delay the initial transmission + */ + u16 initial_xmit_delay; + /** + * @initial_dec_delay: + * Initial decoder delay, number of pixel times that the decoder + * accumulates data in its rate buffer before starting to decode + * and output pixels. + */ + u16 initial_dec_delay; + /** + * @block_pred_enable: + * True if block prediction is used to code any groups within the + * picture. False if BP not used + */ + bool block_pred_enable; + /** + * @first_line_bpg_offset: + * Number of additional bits allocated for each group on the first + * line of slice. + */ + u8 first_line_bpg_offset; + /** + * @initial_offset: Value to use for RC model offset at slice start + */ + u16 initial_offset; + /** + * @rc_buf_thresh: Thresholds defining each of the buffer ranges + */ + u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1]; + /** + * @rc_range_params: + * Parameters for each of the RC ranges defined in + * &struct drm_dsc_rc_range_parameters + */ + struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES]; + /** + * @rc_model_size: Total size of RC model + */ + u16 rc_model_size; + /** + * @flatness_min_qp: Minimum QP where flatness information is sent + */ + u8 flatness_min_qp; + /** + * @flatness_max_qp: Maximum QP where flatness information is sent + */ + u8 flatness_max_qp; + /** + * @initial_scale_value: Initial value for the scale factor + */ + u8 initial_scale_value; + /** + * @scale_decrement_interval: + * Specifies number of group times between decrementing the scale factor + * at beginning of a slice. + */ + u16 scale_decrement_interval; + /** + * @scale_increment_interval: + * Number of group times between incrementing the scale factor value + * used at the beginning of a slice. + */ + u16 scale_increment_interval; + /** + * @nfl_bpg_offset: Non first line BPG offset to be used + */ + u16 nfl_bpg_offset; + /** + * @slice_bpg_offset: BPG offset used to enforce slice bit + */ + u16 slice_bpg_offset; + /** + * @final_offset: Final RC linear transformation offset value + */ + u16 final_offset; + /** + * @vbr_enable: True if VBR mode is enabled, false if disabled + */ + bool vbr_enable; + /** + * @mux_word_size: Mux word size (in bits) for SSM mode + */ + u8 mux_word_size; + /** + * @slice_chunk_size: + * The (max) size in bytes of the "chunks" that are used in slice + * multiplexing. + */ + u16 slice_chunk_size; + /** + * @rc_bits: Rate control buffer size in bits + */ + u16 rc_bits; + /** + * @dsc_version_minor: DSC minor version + */ + u8 dsc_version_minor; + /** + * @dsc_version_major: DSC major version + */ + u8 dsc_version_major; + /** + * @native_422: True if Native 4:2:2 supported, else false + */ + bool native_422; + /** + * @native_420: True if Native 4:2:0 supported else false. + */ + bool native_420; + /** + * @second_line_bpg_offset: + * Additional bits/grp for seconnd line of slice for native 4:2:0 + */ + u8 second_line_bpg_offset; + /** + * @nsl_bpg_offset: + * Num of bits deallocated for each grp that is not in second line of + * slice + */ + u16 nsl_bpg_offset; + /** + * @second_line_offset_adj: + * Offset adjustment for second line in Native 4:2:0 mode + */ + u16 second_line_offset_adj; +}; + +/** + * struct drm_dsc_picture_parameter_set - Represents 128 bytes of + * Picture Parameter Set + * + * The VESA DSC standard defines picture parameter set (PPS) which display + * stream compression encoders must communicate to decoders. + * The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in + * this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2. + * The PPS fields that span over more than a byte should be stored in Big Endian + * format. + */ +struct drm_dsc_picture_parameter_set { + /** + * @dsc_version: + * PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC + * PPS0[7:4] - dsc_version_major: Contains major version of DSC + */ + u8 dsc_version; + /** + * @pps_identifier: + * PPS1[7:0] - Application specific identifier that can be + * used to differentiate between different PPS tables. + */ + u8 pps_identifier; + /** + * @pps_reserved: + * PPS2[7:0]- RESERVED Byte + */ + u8 pps_reserved; + /** + * @pps_3: + * PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to + * generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits, + * 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits, + * 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2. + * PPS3[7:4] - bits_per_component: Bits per component for the original + * pixels of the encoded picture. + * 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2) + * 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also + * allowed only when dsc_minor_version = 0x2) + */ + u8 pps_3; + /** + * @pps_4: + * PPS4[1:0] -These are the most significant 2 bits of + * compressed BPP bits_per_pixel[9:0] syntax element. + * PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled + * PPS4[3] - simple_422: Indicates if decoder drops samples to + * reconstruct the 4:2:2 picture. + * PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is + * active. + * PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any + * groups in picture + * PPS4[7:6] - Reseved bits + */ + u8 pps_4; + /** + * @bits_per_pixel_low: + * PPS5[7:0] - This indicates the lower significant 8 bits of + * the compressed BPP bits_per_pixel[9:0] element. + */ + u8 bits_per_pixel_low; + /** + * @pic_height: + * PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows + * within the raster. + */ + __be16 pic_height; + /** + * @pic_width: + * PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within + * the raster. + */ + __be16 pic_width; + /** + * @slice_height: + * PPS10[7:0], PPS11[7:0] - Slice height in units of pixels. + */ + __be16 slice_height; + /** + * @slice_width: + * PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels. + */ + __be16 slice_width; + /** + * @chunk_size: + * PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks + * that are used for slice multiplexing. + */ + __be16 chunk_size; + /** + * @initial_xmit_delay_high: + * PPS16[1:0] - Most Significant two bits of initial transmission delay. + * It specifies the number of pixel times that the encoder waits before + * transmitting data from its rate buffer. + * PPS16[7:2] - Reserved + */ + u8 initial_xmit_delay_high; + /** + * @initial_xmit_delay_low: + * PPS17[7:0] - Least significant 8 bits of initial transmission delay. + */ + u8 initial_xmit_delay_low; + /** + * @initial_dec_delay: + * + * PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number + * of pixel times that the decoder accumulates data in its rate buffer + * before starting to decode and output pixels. + */ + __be16 initial_dec_delay; + /** + * @pps20_reserved: + * + * PPS20[7:0] - Reserved + */ + u8 pps20_reserved; + /** + * @initial_scale_value: + * PPS21[5:0] - Initial rcXformScale factor used at beginning + * of a slice. + * PPS21[7:6] - Reserved + */ + u8 initial_scale_value; + /** + * @scale_increment_interval: + * PPS22[7:0], PPS23[7:0] - Number of group times between incrementing + * the rcXformScale factor at end of a slice. + */ + __be16 scale_increment_interval; + /** + * @scale_decrement_interval_high: + * PPS24[3:0] - Higher 4 bits indicating number of group times between + * decrementing the rcXformScale factor at beginning of a slice. + * PPS24[7:4] - Reserved + */ + u8 scale_decrement_interval_high; + /** + * @scale_decrement_interval_low: + * PPS25[7:0] - Lower 8 bits of scale decrement interval + */ + u8 scale_decrement_interval_low; + /** + * @pps26_reserved: + * PPS26[7:0] + */ + u8 pps26_reserved; + /** + * @first_line_bpg_offset: + * PPS27[4:0] - Number of additional bits that are allocated + * for each group on first line of a slice. + * PPS27[7:5] - Reserved + */ + u8 first_line_bpg_offset; + /** + * @nfl_bpg_offset: + * PPS28[7:0], PPS29[7:0] - Number of bits including frac bits + * deallocated for each group for groups after the first line of slice. + */ + __be16 nfl_bpg_offset; + /** + * @slice_bpg_offset: + * PPS30, PPS31[7:0] - Number of bits that are deallocated for each + * group to enforce the slice constraint. + */ + __be16 slice_bpg_offset; + /** + * @initial_offset: + * PPS32,33[7:0] - Initial value for rcXformOffset + */ + __be16 initial_offset; + /** + * @final_offset: + * PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset + */ + __be16 final_offset; + /** + * @flatness_min_qp: + * PPS36[4:0] - Minimum QP at which flatness is signaled and + * flatness QP adjustment is made. + * PPS36[7:5] - Reserved + */ + u8 flatness_min_qp; + /** + * @flatness_max_qp: + * PPS37[4:0] - Max QP at which flatness is signalled and + * the flatness adjustment is made. + * PPS37[7:5] - Reserved + */ + u8 flatness_max_qp; + /** + * @rc_model_size: + * PPS38,39[7:0] - Number of bits within RC Model. + */ + __be16 rc_model_size; + /** + * @rc_edge_factor: + * PPS40[3:0] - Ratio of current activity vs, previous + * activity to determine presence of edge. + * PPS40[7:4] - Reserved + */ + u8 rc_edge_factor; + /** + * @rc_quant_incr_limit0: + * PPS41[4:0] - QP threshold used in short term RC + * PPS41[7:5] - Reserved + */ + u8 rc_quant_incr_limit0; + /** + * @rc_quant_incr_limit1: + * PPS42[4:0] - QP threshold used in short term RC + * PPS42[7:5] - Reserved + */ + u8 rc_quant_incr_limit1; + /** + * @rc_tgt_offset: + * PPS43[3:0] - Lower end of the variability range around the target + * bits per group that is allowed by short term RC. + * PPS43[7:4]- Upper end of the variability range around the target + * bits per group that i allowed by short term rc. + */ + u8 rc_tgt_offset; + /** + * @rc_buf_thresh: + * PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for + * the 15 ranges defined by 14 thresholds. + */ + u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1]; + /** + * @rc_range_parameters: + * PPS58[7:0] - PPS87[7:0] + * Parameters that correspond to each of the 15 ranges. + */ + __be16 rc_range_parameters[DSC_NUM_BUF_RANGES]; + /** + * @native_422_420: + * PPS88[0] - 0 = Native 4:2:2 not used + * 1 = Native 4:2:2 used + * PPS88[1] - 0 = Native 4:2:0 not use + * 1 = Native 4:2:0 used + * PPS88[7:2] - Reserved 6 bits + */ + u8 native_422_420; + /** + * @second_line_bpg_offset: + * PPS89[4:0] - Additional bits/group budget for the + * second line of a slice in Native 4:2:0 mode. + * Set to 0 if DSC minor version is 1 or native420 is 0. + * PPS89[7:5] - Reserved + */ + u8 second_line_bpg_offset; + /** + * @nsl_bpg_offset: + * PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated + * for each group that is not in the second line of a slice. + */ + __be16 nsl_bpg_offset; + /** + * @second_line_offset_adj: + * PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second + * line in Native 4:2:0 mode. + */ + __be16 second_line_offset_adj; + /** + * @pps_long_94_reserved: + * PPS 94, 95, 96, 97 - Reserved + */ + u32 pps_long_94_reserved; + /** + * @pps_long_98_reserved: + * PPS 98, 99, 100, 101 - Reserved + */ + u32 pps_long_98_reserved; + /** + * @pps_long_102_reserved: + * PPS 102, 103, 104, 105 - Reserved + */ + u32 pps_long_102_reserved; + /** + * @pps_long_106_reserved: + * PPS 106, 107, 108, 109 - reserved + */ + u32 pps_long_106_reserved; + /** + * @pps_long_110_reserved: + * PPS 110, 111, 112, 113 - reserved + */ + u32 pps_long_110_reserved; + /** + * @pps_long_114_reserved: + * PPS 114 - 117 - reserved + */ + u32 pps_long_114_reserved; + /** + * @pps_long_118_reserved: + * PPS 118 - 121 - reserved + */ + u32 pps_long_118_reserved; + /** + * @pps_long_122_reserved: + * PPS 122- 125 - reserved + */ + u32 pps_long_122_reserved; + /** + * @pps_short_126_reserved: + * PPS 126, 127 - reserved + */ + __be16 pps_short_126_reserved; +} __packed; + +/** + * struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter + * Set Metadata + * + * This structure represents the DSC PPS infoframe required to send the Picture + * Parameter Set metadata required before enabling VESA Display Stream + * Compression. This is based on the DP Secondary Data Packet structure and + * comprises of SDP Header as defined &struct dp_sdp_header in drm_dp_helper.h + * and PPS payload defined in &struct drm_dsc_picture_parameter_set. + * + * @pps_header: Header for PPS as per DP SDP header format of type + * &struct dp_sdp_header + * @pps_payload: PPS payload fields as per DSC specification Table 4-1 + * as represented in &struct drm_dsc_picture_parameter_set + */ +struct drm_dsc_pps_infoframe { + struct dp_sdp_header pps_header; + struct drm_dsc_picture_parameter_set pps_payload; +} __packed; + +#endif /* _DRM_DSC_H_ */ diff --git a/include/drm/display/drm_dsc_helper.h b/include/drm/display/drm_dsc_helper.h new file mode 100644 index 000000000000..8b41edbbabab --- /dev/null +++ b/include/drm/display/drm_dsc_helper.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: MIT + * Copyright (C) 2018 Intel Corp. + * + * Authors: + * Manasi Navare <manasi.d.navare@intel.com> + */ + +#ifndef DRM_DSC_HELPER_H_ +#define DRM_DSC_HELPER_H_ + +#include <drm/display/drm_dsc.h> + +void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header); +int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size); +void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp, + const struct drm_dsc_config *dsc_cfg); +int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg); + +#endif /* _DRM_DSC_HELPER_H_ */ + diff --git a/include/drm/display/drm_hdcp.h b/include/drm/display/drm_hdcp.h new file mode 100644 index 000000000000..96a99b1377c0 --- /dev/null +++ b/include/drm/display/drm_hdcp.h @@ -0,0 +1,298 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright (C) 2017 Google, Inc. + * + * Authors: + * Sean Paul <seanpaul@chromium.org> + */ + +#ifndef _DRM_HDCP_H_ +#define _DRM_HDCP_H_ + +#include <linux/types.h> + +/* Period of hdcp checks (to ensure we're still authenticated) */ +#define DRM_HDCP_CHECK_PERIOD_MS (128 * 16) +#define DRM_HDCP2_CHECK_PERIOD_MS 500 + +/* Shared lengths/masks between HDMI/DVI/DisplayPort */ +#define DRM_HDCP_AN_LEN 8 +#define DRM_HDCP_BSTATUS_LEN 2 +#define DRM_HDCP_KSV_LEN 5 +#define DRM_HDCP_RI_LEN 2 +#define DRM_HDCP_V_PRIME_PART_LEN 4 +#define DRM_HDCP_V_PRIME_NUM_PARTS 5 +#define DRM_HDCP_NUM_DOWNSTREAM(x) (x & 0x7f) +#define DRM_HDCP_MAX_CASCADE_EXCEEDED(x) (x & BIT(3)) +#define DRM_HDCP_MAX_DEVICE_EXCEEDED(x) (x & BIT(7)) + +/* Slave address for the HDCP registers in the receiver */ +#define DRM_HDCP_DDC_ADDR 0x3A + +/* Value to use at the end of the SHA-1 bytestream used for repeaters */ +#define DRM_HDCP_SHA1_TERMINATOR 0x80 + +/* HDCP register offsets for HDMI/DVI devices */ +#define DRM_HDCP_DDC_BKSV 0x00 +#define DRM_HDCP_DDC_RI_PRIME 0x08 +#define DRM_HDCP_DDC_AKSV 0x10 +#define DRM_HDCP_DDC_AN 0x18 +#define DRM_HDCP_DDC_V_PRIME(h) (0x20 + h * 4) +#define DRM_HDCP_DDC_BCAPS 0x40 +#define DRM_HDCP_DDC_BCAPS_REPEATER_PRESENT BIT(6) +#define DRM_HDCP_DDC_BCAPS_KSV_FIFO_READY BIT(5) +#define DRM_HDCP_DDC_BSTATUS 0x41 +#define DRM_HDCP_DDC_KSV_FIFO 0x43 + +#define DRM_HDCP_1_4_SRM_ID 0x8 +#define DRM_HDCP_1_4_VRL_LENGTH_SIZE 3 +#define DRM_HDCP_1_4_DCP_SIG_SIZE 40 + +/* Protocol message definition for HDCP2.2 specification */ +/* + * Protected content streams are classified into 2 types: + * - Type0: Can be transmitted with HDCP 1.4+ + * - Type1: Can be transmitted with HDCP 2.2+ + */ +#define HDCP_STREAM_TYPE0 0x00 +#define HDCP_STREAM_TYPE1 0x01 + +/* HDCP2.2 Msg IDs */ +#define HDCP_2_2_NULL_MSG 1 +#define HDCP_2_2_AKE_INIT 2 +#define HDCP_2_2_AKE_SEND_CERT 3 +#define HDCP_2_2_AKE_NO_STORED_KM 4 +#define HDCP_2_2_AKE_STORED_KM 5 +#define HDCP_2_2_AKE_SEND_HPRIME 7 +#define HDCP_2_2_AKE_SEND_PAIRING_INFO 8 +#define HDCP_2_2_LC_INIT 9 +#define HDCP_2_2_LC_SEND_LPRIME 10 +#define HDCP_2_2_SKE_SEND_EKS 11 +#define HDCP_2_2_REP_SEND_RECVID_LIST 12 +#define HDCP_2_2_REP_SEND_ACK 15 +#define HDCP_2_2_REP_STREAM_MANAGE 16 +#define HDCP_2_2_REP_STREAM_READY 17 + +#define HDCP_2_2_RTX_LEN 8 +#define HDCP_2_2_RRX_LEN 8 + +#define HDCP_2_2_K_PUB_RX_MOD_N_LEN 128 +#define HDCP_2_2_K_PUB_RX_EXP_E_LEN 3 +#define HDCP_2_2_K_PUB_RX_LEN (HDCP_2_2_K_PUB_RX_MOD_N_LEN + \ + HDCP_2_2_K_PUB_RX_EXP_E_LEN) + +#define HDCP_2_2_DCP_LLC_SIG_LEN 384 + +#define HDCP_2_2_E_KPUB_KM_LEN 128 +#define HDCP_2_2_E_KH_KM_M_LEN (16 + 16) +#define HDCP_2_2_H_PRIME_LEN 32 +#define HDCP_2_2_E_KH_KM_LEN 16 +#define HDCP_2_2_RN_LEN 8 +#define HDCP_2_2_L_PRIME_LEN 32 +#define HDCP_2_2_E_DKEY_KS_LEN 16 +#define HDCP_2_2_RIV_LEN 8 +#define HDCP_2_2_SEQ_NUM_LEN 3 +#define HDCP_2_2_V_PRIME_HALF_LEN (HDCP_2_2_L_PRIME_LEN / 2) +#define HDCP_2_2_RECEIVER_ID_LEN DRM_HDCP_KSV_LEN +#define HDCP_2_2_MAX_DEVICE_COUNT 31 +#define HDCP_2_2_RECEIVER_IDS_MAX_LEN (HDCP_2_2_RECEIVER_ID_LEN * \ + HDCP_2_2_MAX_DEVICE_COUNT) +#define HDCP_2_2_MPRIME_LEN 32 + +/* Following Macros take a byte at a time for bit(s) masking */ +/* + * TODO: HDCP_2_2_MAX_CONTENT_STREAMS_CNT is based upon actual + * H/W MST streams capacity. + * This required to be moved out to platform specific header. + */ +#define HDCP_2_2_MAX_CONTENT_STREAMS_CNT 4 +#define HDCP_2_2_TXCAP_MASK_LEN 2 +#define HDCP_2_2_RXCAPS_LEN 3 +#define HDCP_2_2_RX_REPEATER(x) ((x) & BIT(0)) +#define HDCP_2_2_DP_HDCP_CAPABLE(x) ((x) & BIT(1)) +#define HDCP_2_2_RXINFO_LEN 2 + +/* HDCP1.x compliant device in downstream */ +#define HDCP_2_2_HDCP1_DEVICE_CONNECTED(x) ((x) & BIT(0)) + +/* HDCP2.0 Compliant repeater in downstream */ +#define HDCP_2_2_HDCP_2_0_REP_CONNECTED(x) ((x) & BIT(1)) +#define HDCP_2_2_MAX_CASCADE_EXCEEDED(x) ((x) & BIT(2)) +#define HDCP_2_2_MAX_DEVS_EXCEEDED(x) ((x) & BIT(3)) +#define HDCP_2_2_DEV_COUNT_LO(x) (((x) & (0xF << 4)) >> 4) +#define HDCP_2_2_DEV_COUNT_HI(x) ((x) & BIT(0)) +#define HDCP_2_2_DEPTH(x) (((x) & (0x7 << 1)) >> 1) + +struct hdcp2_cert_rx { + u8 receiver_id[HDCP_2_2_RECEIVER_ID_LEN]; + u8 kpub_rx[HDCP_2_2_K_PUB_RX_LEN]; + u8 reserved[2]; + u8 dcp_signature[HDCP_2_2_DCP_LLC_SIG_LEN]; +} __packed; + +struct hdcp2_streamid_type { + u8 stream_id; + u8 stream_type; +} __packed; + +/* + * The TxCaps field specified in the HDCP HDMI, DP specs + * This field is big endian as specified in the errata. + */ +struct hdcp2_tx_caps { + /* Transmitter must set this to 0x2 */ + u8 version; + + /* Reserved for HDCP and DP Spec. Read as Zero */ + u8 tx_cap_mask[HDCP_2_2_TXCAP_MASK_LEN]; +} __packed; + +/* Main structures for HDCP2.2 protocol communication */ +struct hdcp2_ake_init { + u8 msg_id; + u8 r_tx[HDCP_2_2_RTX_LEN]; + struct hdcp2_tx_caps tx_caps; +} __packed; + +struct hdcp2_ake_send_cert { + u8 msg_id; + struct hdcp2_cert_rx cert_rx; + u8 r_rx[HDCP_2_2_RRX_LEN]; + u8 rx_caps[HDCP_2_2_RXCAPS_LEN]; +} __packed; + +struct hdcp2_ake_no_stored_km { + u8 msg_id; + u8 e_kpub_km[HDCP_2_2_E_KPUB_KM_LEN]; +} __packed; + +struct hdcp2_ake_stored_km { + u8 msg_id; + u8 e_kh_km_m[HDCP_2_2_E_KH_KM_M_LEN]; +} __packed; + +struct hdcp2_ake_send_hprime { + u8 msg_id; + u8 h_prime[HDCP_2_2_H_PRIME_LEN]; +} __packed; + +struct hdcp2_ake_send_pairing_info { + u8 msg_id; + u8 e_kh_km[HDCP_2_2_E_KH_KM_LEN]; +} __packed; + +struct hdcp2_lc_init { + u8 msg_id; + u8 r_n[HDCP_2_2_RN_LEN]; +} __packed; + +struct hdcp2_lc_send_lprime { + u8 msg_id; + u8 l_prime[HDCP_2_2_L_PRIME_LEN]; +} __packed; + +struct hdcp2_ske_send_eks { + u8 msg_id; + u8 e_dkey_ks[HDCP_2_2_E_DKEY_KS_LEN]; + u8 riv[HDCP_2_2_RIV_LEN]; +} __packed; + +struct hdcp2_rep_send_receiverid_list { + u8 msg_id; + u8 rx_info[HDCP_2_2_RXINFO_LEN]; + u8 seq_num_v[HDCP_2_2_SEQ_NUM_LEN]; + u8 v_prime[HDCP_2_2_V_PRIME_HALF_LEN]; + u8 receiver_ids[HDCP_2_2_RECEIVER_IDS_MAX_LEN]; +} __packed; + +struct hdcp2_rep_send_ack { + u8 msg_id; + u8 v[HDCP_2_2_V_PRIME_HALF_LEN]; +} __packed; + +struct hdcp2_rep_stream_manage { + u8 msg_id; + u8 seq_num_m[HDCP_2_2_SEQ_NUM_LEN]; + __be16 k; + struct hdcp2_streamid_type streams[HDCP_2_2_MAX_CONTENT_STREAMS_CNT]; +} __packed; + +struct hdcp2_rep_stream_ready { + u8 msg_id; + u8 m_prime[HDCP_2_2_MPRIME_LEN]; +} __packed; + +/* HDCP2.2 TIMEOUTs in mSec */ +#define HDCP_2_2_CERT_TIMEOUT_MS 100 +#define HDCP_2_2_DP_CERT_READ_TIMEOUT_MS 110 +#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS 1000 +#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS 200 +#define HDCP_2_2_DP_HPRIME_READ_TIMEOUT_MS 7 +#define HDCP_2_2_PAIRING_TIMEOUT_MS 200 +#define HDCP_2_2_DP_PAIRING_READ_TIMEOUT_MS 5 +#define HDCP_2_2_HDMI_LPRIME_TIMEOUT_MS 20 +#define HDCP_2_2_DP_LPRIME_TIMEOUT_MS 16 +#define HDCP_2_2_RECVID_LIST_TIMEOUT_MS 3000 +#define HDCP_2_2_STREAM_READY_TIMEOUT_MS 100 + +/* HDMI HDCP2.2 Register Offsets */ +#define HDCP_2_2_HDMI_REG_VER_OFFSET 0x50 +#define HDCP_2_2_HDMI_REG_WR_MSG_OFFSET 0x60 +#define HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET 0x70 +#define HDCP_2_2_HDMI_REG_RD_MSG_OFFSET 0x80 +#define HDCP_2_2_HDMI_REG_DBG_OFFSET 0xC0 + +#define HDCP_2_2_HDMI_SUPPORT_MASK BIT(2) +#define HDCP_2_2_RX_CAPS_VERSION_VAL 0x02 +#define HDCP_2_2_SEQ_NUM_MAX 0xFFFFFF +#define HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN 200 + +/* Below macros take a byte at a time and mask the bit(s) */ +#define HDCP_2_2_HDMI_RXSTATUS_LEN 2 +#define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x) ((x) & 0x3) +#define HDCP_2_2_HDMI_RXSTATUS_READY(x) ((x) & BIT(2)) +#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3)) + +/* + * Helper functions to convert 24bit big endian hdcp sequence number to + * host format and back + */ +static inline +u32 drm_hdcp_be24_to_cpu(const u8 seq_num[HDCP_2_2_SEQ_NUM_LEN]) +{ + return (u32)(seq_num[2] | seq_num[1] << 8 | seq_num[0] << 16); +} + +static inline +void drm_hdcp_cpu_to_be24(u8 seq_num[HDCP_2_2_SEQ_NUM_LEN], u32 val) +{ + seq_num[0] = val >> 16; + seq_num[1] = val >> 8; + seq_num[2] = val; +} + +#define DRM_HDCP_SRM_GEN1_MAX_BYTES (5 * 1024) +#define DRM_HDCP_1_4_SRM_ID 0x8 +#define DRM_HDCP_SRM_ID_MASK (0xF << 4) +#define DRM_HDCP_1_4_VRL_LENGTH_SIZE 3 +#define DRM_HDCP_1_4_DCP_SIG_SIZE 40 +#define DRM_HDCP_2_SRM_ID 0x9 +#define DRM_HDCP_2_INDICATOR 0x1 +#define DRM_HDCP_2_INDICATOR_MASK 0xF +#define DRM_HDCP_2_VRL_LENGTH_SIZE 3 +#define DRM_HDCP_2_DCP_SIG_SIZE 384 +#define DRM_HDCP_2_NO_OF_DEV_PLUS_RESERVED_SZ 4 +#define DRM_HDCP_2_KSV_COUNT_2_LSBITS(byte) (((byte) & 0xC0) >> 6) + +struct hdcp_srm_header { + u8 srm_id; + u8 reserved; + __be16 srm_version; + u8 srm_gen_no; +} __packed; + +/* Content Type classification for HDCP2.2 vs others */ +#define DRM_MODE_HDCP_CONTENT_TYPE0 0 +#define DRM_MODE_HDCP_CONTENT_TYPE1 1 + +#endif diff --git a/include/drm/display/drm_hdcp_helper.h b/include/drm/display/drm_hdcp_helper.h new file mode 100644 index 000000000000..8aaf87bf2735 --- /dev/null +++ b/include/drm/display/drm_hdcp_helper.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright (C) 2017 Google, Inc. + * + * Authors: + * Sean Paul <seanpaul@chromium.org> + */ + +#ifndef _DRM_HDCP_HELPER_H_INCLUDED_ +#define _DRM_HDCP_HELPER_H_INCLUDED_ + +#include <drm/display/drm_hdcp.h> + +struct drm_device; +struct drm_connector; + +int drm_hdcp_check_ksvs_revoked(struct drm_device *dev, u8 *ksvs, u32 ksv_count); +int drm_connector_attach_content_protection_property(struct drm_connector *connector, + bool hdcp_content_type); +void drm_hdcp_update_content_protection(struct drm_connector *connector, u64 val); + +#endif diff --git a/include/drm/display/drm_hdmi_helper.h b/include/drm/display/drm_hdmi_helper.h new file mode 100644 index 000000000000..76d234826e22 --- /dev/null +++ b/include/drm/display/drm_hdmi_helper.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef DRM_HDMI_HELPER +#define DRM_HDMI_HELPER + +#include <linux/hdmi.h> + +struct drm_connector; +struct drm_connector_state; +struct drm_display_mode; + +void +drm_hdmi_avi_infoframe_colorimetry(struct hdmi_avi_infoframe *frame, + const struct drm_connector_state *conn_state); + +void +drm_hdmi_avi_infoframe_bars(struct hdmi_avi_infoframe *frame, + const struct drm_connector_state *conn_state); + +int +drm_hdmi_infoframe_set_hdr_metadata(struct hdmi_drm_infoframe *frame, + const struct drm_connector_state *conn_state); + +void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, + const struct drm_connector_state *conn_state); + +#endif diff --git a/include/drm/display/drm_scdc.h b/include/drm/display/drm_scdc.h new file mode 100644 index 000000000000..3d58f37e8ed8 --- /dev/null +++ b/include/drm/display/drm_scdc.h @@ -0,0 +1,88 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_SCDC_H +#define DRM_SCDC_H + +#define SCDC_SINK_VERSION 0x01 + +#define SCDC_SOURCE_VERSION 0x02 + +#define SCDC_UPDATE_0 0x10 +#define SCDC_READ_REQUEST_TEST (1 << 2) +#define SCDC_CED_UPDATE (1 << 1) +#define SCDC_STATUS_UPDATE (1 << 0) + +#define SCDC_UPDATE_1 0x11 + +#define SCDC_TMDS_CONFIG 0x20 +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1) +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1) +#define SCDC_SCRAMBLING_ENABLE (1 << 0) + +#define SCDC_SCRAMBLER_STATUS 0x21 +#define SCDC_SCRAMBLING_STATUS (1 << 0) + +#define SCDC_CONFIG_0 0x30 +#define SCDC_READ_REQUEST_ENABLE (1 << 0) + +#define SCDC_STATUS_FLAGS_0 0x40 +#define SCDC_CH2_LOCK (1 << 3) +#define SCDC_CH1_LOCK (1 << 2) +#define SCDC_CH0_LOCK (1 << 1) +#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK) +#define SCDC_CLOCK_DETECT (1 << 0) + +#define SCDC_STATUS_FLAGS_1 0x41 + +#define SCDC_ERR_DET_0_L 0x50 +#define SCDC_ERR_DET_0_H 0x51 +#define SCDC_ERR_DET_1_L 0x52 +#define SCDC_ERR_DET_1_H 0x53 +#define SCDC_ERR_DET_2_L 0x54 +#define SCDC_ERR_DET_2_H 0x55 +#define SCDC_CHANNEL_VALID (1 << 7) + +#define SCDC_ERR_DET_CHECKSUM 0x56 + +#define SCDC_TEST_CONFIG_0 0xc0 +#define SCDC_TEST_READ_REQUEST (1 << 7) +#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f) + +#define SCDC_MANUFACTURER_IEEE_OUI 0xd0 +#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3 + +#define SCDC_DEVICE_ID 0xd3 +#define SCDC_DEVICE_ID_SIZE 8 + +#define SCDC_DEVICE_HARDWARE_REVISION 0xdb +#define SCDC_GET_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf) +#define SCDC_GET_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf) + +#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc +#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd + +#define SCDC_MANUFACTURER_SPECIFIC 0xde +#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34 + +#endif diff --git a/include/drm/display/drm_scdc_helper.h b/include/drm/display/drm_scdc_helper.h new file mode 100644 index 000000000000..ded01fd948b4 --- /dev/null +++ b/include/drm/display/drm_scdc_helper.h @@ -0,0 +1,79 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_SCDC_HELPER_H +#define DRM_SCDC_HELPER_H + +#include <linux/types.h> + +#include <drm/display/drm_scdc.h> + +struct i2c_adapter; + +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size); +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size); + +/** + * drm_scdc_readb - read a single byte from SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Reads a single byte from SCDC. This is a convenience wrapper around the + * drm_scdc_read() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset, + u8 *value) +{ + return drm_scdc_read(adapter, offset, value, sizeof(*value)); +} + +/** + * drm_scdc_writeb - write a single byte to SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Writes a single byte to SCDC. This is a convenience wrapper around the + * drm_scdc_write() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset, + u8 value) +{ + return drm_scdc_write(adapter, offset, &value, sizeof(value)); +} + +bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter); + +bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable); +bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set); + +#endif |