diff options
Diffstat (limited to 'include/drm/drm_connector.h')
| -rw-r--r-- | include/drm/drm_connector.h | 400 |
1 files changed, 346 insertions, 54 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 221910948b37..56aee949c6fa 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -27,6 +27,7 @@ #include <linux/llist.h> #include <linux/ctype.h> #include <linux/hdmi.h> +#include <linux/notifier.h> #include <drm/drm_mode_object.h> #include <drm/drm_util.h> @@ -37,9 +38,11 @@ struct drm_modeset_acquire_ctx; struct drm_device; struct drm_crtc; struct drm_encoder; +struct drm_panel; struct drm_property; struct drm_property_blob; struct drm_printer; +struct drm_privacy_screen; struct edid; struct i2c_adapter; @@ -84,7 +87,7 @@ enum drm_connector_status { }; /** - * enum drm_connector_registration_status - userspace registration status for + * enum drm_connector_registration_state - userspace registration status for * a &drm_connector * * This enum is used to track the status of initializing a connector and @@ -175,6 +178,46 @@ struct drm_scdc { struct drm_scrambling scrambling; }; +/** + * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink + * + * Describes the DSC support provided by HDMI 2.1 sink. + * The information is fetched fom additional HFVSDB blocks defined + * for HDMI 2.1. + */ +struct drm_hdmi_dsc_cap { + /** @v_1p2: flag for dsc1.2 version support by sink */ + bool v_1p2; + + /** @native_420: Does sink support DSC with 4:2:0 compression */ + bool native_420; + + /** + * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2 + * compressed formats + */ + bool all_bpp; + + /** + * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc + */ + u8 bpc_supported; + + /** @max_slices: maximum number of Horizontal slices supported by */ + u8 max_slices; + + /** @clk_per_slice : max pixel clock in MHz supported per slice */ + int clk_per_slice; + + /** @max_lanes : dsc max lanes supported for Fixed rate Link training */ + u8 max_lanes; + + /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */ + u8 max_frl_rate_per_lane; + + /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/ + u8 total_chunk_kbytes; +}; /** * struct drm_hdmi_info - runtime information about the connected HDMI sink @@ -207,6 +250,15 @@ struct drm_hdmi_info { /** @y420_dc_modes: bitmap of deep color support index */ u8 y420_dc_modes; + + /** @max_frl_rate_per_lane: support fixed rate link */ + u8 max_frl_rate_per_lane; + + /** @max_lanes: supported by sink */ + u8 max_lanes; + + /** @dsc_cap: DSC capabilities of the sink */ + struct drm_hdmi_dsc_cap dsc_cap; }; /** @@ -254,6 +306,63 @@ enum drm_panel_orientation { DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, }; +/** + * struct drm_monitor_range_info - Panel's Monitor range in EDID for + * &drm_display_info + * + * This struct is used to store a frequency range supported by panel + * as parsed from EDID's detailed monitor range descriptor block. + * + * @min_vfreq: This is the min supported refresh rate in Hz from + * EDID's detailed monitor range. + * @max_vfreq: This is the max supported refresh rate in Hz from + * EDID's detailed monitor range + */ +struct drm_monitor_range_info { + u16 min_vfreq; + u16 max_vfreq; +}; + +/** + * struct drm_luminance_range_info - Panel's luminance range for + * &drm_display_info. Calculated using data in EDID + * + * This struct is used to store a luminance range supported by panel + * as calculated using data from EDID's static hdr metadata. + * + * @min_luminance: This is the min supported luminance value + * + * @max_luminance: This is the max supported luminance value + */ +struct drm_luminance_range_info { + u32 min_luminance; + u32 max_luminance; +}; + +/** + * enum drm_privacy_screen_status - privacy screen status + * + * This enum is used to track and control the state of the integrated privacy + * screen present on some display panels, via the "privacy-screen sw-state" + * and "privacy-screen hw-state" properties. Note the _LOCKED enum values + * are only valid for the "privacy-screen hw-state" property. + * + * @PRIVACY_SCREEN_DISABLED: + * The privacy-screen on the panel is disabled + * @PRIVACY_SCREEN_ENABLED: + * The privacy-screen on the panel is enabled + * @PRIVACY_SCREEN_DISABLED_LOCKED: + * The privacy-screen on the panel is disabled and locked (cannot be changed) + * @PRIVACY_SCREEN_ENABLED_LOCKED: + * The privacy-screen on the panel is enabled and locked (cannot be changed) + */ +enum drm_privacy_screen_status { + PRIVACY_SCREEN_DISABLED = 0, + PRIVACY_SCREEN_ENABLED, + PRIVACY_SCREEN_DISABLED_LOCKED, + PRIVACY_SCREEN_ENABLED_LOCKED, +}; + /* * This is a consolidated colorimetry list supported by HDMI and * DP protocol standard. The respective connectors will register @@ -303,51 +412,97 @@ enum drm_panel_orientation { * opposite edge of the driving edge. Transmitters and receivers may however * need to take other signal timings into account to convert between driving * and sample edges. - * - * @DRM_BUS_FLAG_DE_LOW: The Data Enable signal is active low - * @DRM_BUS_FLAG_DE_HIGH: The Data Enable signal is active high - * @DRM_BUS_FLAG_PIXDATA_POSEDGE: Legacy value, do not use - * @DRM_BUS_FLAG_PIXDATA_NEGEDGE: Legacy value, do not use - * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: Data is driven on the rising edge of - * the pixel clock - * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: Data is driven on the falling edge of - * the pixel clock - * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: Data is sampled on the rising edge of - * the pixel clock - * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: Data is sampled on the falling edge of - * the pixel clock - * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: Data is transmitted MSB to LSB on the bus - * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: Data is transmitted LSB to MSB on the bus - * @DRM_BUS_FLAG_SYNC_POSEDGE: Legacy value, do not use - * @DRM_BUS_FLAG_SYNC_NEGEDGE: Legacy value, do not use - * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: Sync signals are driven on the rising - * edge of the pixel clock - * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: Sync signals are driven on the falling - * edge of the pixel clock - * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: Sync signals are sampled on the rising - * edge of the pixel clock - * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: Sync signals are sampled on the falling - * edge of the pixel clock - * @DRM_BUS_FLAG_SHARP_SIGNALS: Set if the Sharp-specific signals - * (SPL, CLS, PS, REV) must be used */ enum drm_bus_flags { + /** + * @DRM_BUS_FLAG_DE_LOW: + * + * The Data Enable signal is active low + */ DRM_BUS_FLAG_DE_LOW = BIT(0), + + /** + * @DRM_BUS_FLAG_DE_HIGH: + * + * The Data Enable signal is active high + */ DRM_BUS_FLAG_DE_HIGH = BIT(1), - DRM_BUS_FLAG_PIXDATA_POSEDGE = BIT(2), - DRM_BUS_FLAG_PIXDATA_NEGEDGE = BIT(3), - DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE, - DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE, - DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE, - DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE, + + /** + * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: + * + * Data is driven on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2), + + /** + * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: + * + * Data is driven on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3), + + /** + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: + * + * Data is sampled on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, + + /** + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: + * + * Data is sampled on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + + /** + * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: + * + * Data is transmitted MSB to LSB on the bus + */ DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), + + /** + * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: + * + * Data is transmitted LSB to MSB on the bus + */ DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), - DRM_BUS_FLAG_SYNC_POSEDGE = BIT(6), - DRM_BUS_FLAG_SYNC_NEGEDGE = BIT(7), - DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = DRM_BUS_FLAG_SYNC_POSEDGE, - DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE, - DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE, - DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_POSEDGE, + + /** + * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: + * + * Sync signals are driven on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6), + + /** + * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: + * + * Sync signals are driven on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7), + + /** + * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: + * + * Sync signals are sampled on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE, + + /** + * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: + * + * Sync signals are sampled on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, + + /** + * @DRM_BUS_FLAG_SHARP_SIGNALS: + * + * Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used + */ DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), }; @@ -384,9 +539,9 @@ struct drm_display_info { enum subpixel_order subpixel_order; #define DRM_COLOR_FORMAT_RGB444 (1<<0) -#define DRM_COLOR_FORMAT_YCRCB444 (1<<1) -#define DRM_COLOR_FORMAT_YCRCB422 (1<<2) -#define DRM_COLOR_FORMAT_YCRCB420 (1<<3) +#define DRM_COLOR_FORMAT_YCBCR444 (1<<1) +#define DRM_COLOR_FORMAT_YCBCR422 (1<<2) +#define DRM_COLOR_FORMAT_YCBCR420 (1<<3) /** * @panel_orientation: Read only connector property for built-in panels, @@ -435,6 +590,14 @@ struct drm_display_info { bool dvi_dual; /** + * @is_hdmi: True if the sink is an HDMI device. + * + * This field shall be used instead of calling + * drm_detect_hdmi_monitor() when possible. + */ + bool is_hdmi; + + /** * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? */ bool has_hdmi_infoframe; @@ -446,10 +609,16 @@ struct drm_display_info { bool rgb_quant_range_selectable; /** - * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even - * more stuff redundant with @bus_formats. + * @edid_hdmi_rgb444_dc_modes: Mask of supported hdmi deep color modes + * in RGB 4:4:4. Even more stuff redundant with @bus_formats. */ - u8 edid_hdmi_dc_modes; + u8 edid_hdmi_rgb444_dc_modes; + + /** + * @edid_hdmi_ycbcr444_dc_modes: Mask of supported hdmi deep color + * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats. + */ + u8 edid_hdmi_ycbcr444_dc_modes; /** * @cea_rev: CEA revision of the HDMI sink. @@ -465,6 +634,28 @@ struct drm_display_info { * @non_desktop: Non desktop display (HMD). */ bool non_desktop; + + /** + * @monitor_range: Frequency range supported by monitor range descriptor + */ + struct drm_monitor_range_info monitor_range; + + /** + * @luminance_range: Luminance range supported by panel + */ + struct drm_luminance_range_info luminance_range; + + /** + * @mso_stream_count: eDP Multi-SST Operation (MSO) stream count from + * the DisplayID VESA vendor block. 0 for conventional Single-Stream + * Transport (SST), or 2 or 4 MSO streams. + */ + u8 mso_stream_count; + + /** + * @mso_pixel_overlap: eDP MSO segment pixel overlap, 0-8 pixels. + */ + u8 mso_pixel_overlap; }; int drm_display_info_set_bus_formats(struct drm_display_info *info, @@ -657,6 +848,12 @@ struct drm_connector_state { u8 max_bpc; /** + * @privacy_screen_sw_state: See :ref:`Standard Connector + * Properties<standard_connector_properties>` + */ + enum drm_privacy_screen_status privacy_screen_sw_state; + + /** * @hdr_output_metadata: * DRM blob property for HDR output metadata */ @@ -723,6 +920,11 @@ struct drm_connector_funcs { * locks to avoid races with concurrent modeset changes need to use * &drm_connector_helper_funcs.detect_ctx instead. * + * Also note that this callback can be called no matter the + * state the connector is in. Drivers that need the underlying + * device to be powered to perform the detection will first need + * to make sure it's been properly enabled. + * * RETURNS: * * drm_connector_status indicating the connector's status. @@ -954,6 +1156,21 @@ struct drm_connector_funcs { */ void (*atomic_print_state)(struct drm_printer *p, const struct drm_connector_state *state); + + /** + * @oob_hotplug_event: + * + * This will get called when a hotplug-event for a drm-connector + * has been received from a source outside the display driver / device. + */ + void (*oob_hotplug_event)(struct drm_connector *connector); + + /** + * @debugfs_init: + * + * Allows connectors to create connector-specific debugfs files. + */ + void (*debugfs_init)(struct drm_connector *connector, struct dentry *root); }; /** @@ -1098,6 +1315,14 @@ struct drm_connector { struct device *kdev; /** @attr: sysfs attributes */ struct device_attribute *attr; + /** + * @fwnode: associated fwnode supplied by platform firmware + * + * Drivers can set this to associate a fwnode with a connector, drivers + * are expected to get a reference on the fwnode when setting this. + * drm_connector_cleanup() will call fwnode_handle_put() on this. + */ + struct fwnode_handle *fwnode; /** * @head: @@ -1109,6 +1334,14 @@ struct drm_connector { */ struct list_head head; + /** + * @global_connector_list_entry: + * + * Connector entry in the global connector-list, used by + * drm_connector_find_by_fwnode(). + */ + struct list_head global_connector_list_entry; + /** @base: base KMS object */ struct drm_mode_object base; @@ -1255,6 +1488,24 @@ struct drm_connector { */ struct drm_property *max_bpc_property; + /** @privacy_screen: drm_privacy_screen for this connector, or NULL. */ + struct drm_privacy_screen *privacy_screen; + + /** @privacy_screen_notifier: privacy-screen notifier_block */ + struct notifier_block privacy_screen_notifier; + + /** + * @privacy_screen_sw_state_property: Optional atomic property for the + * connector to control the integrated privacy screen. + */ + struct drm_property *privacy_screen_sw_state_property; + + /** + * @privacy_screen_hw_state_property: Optional atomic property for the + * connector to report the actual integrated privacy screen state. + */ + struct drm_property *privacy_screen_hw_state_property; + #define DRM_CONNECTOR_POLL_HPD (1 << 0) #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) @@ -1297,8 +1548,14 @@ struct drm_connector { struct drm_cmdline_mode cmdline_mode; /** @force: a DRM_FORCE_<foo> state for forced mode sets */ enum drm_connector_force force; - /** @override_edid: has the EDID been overwritten through debugfs for testing? */ + /** + * @override_edid: has the EDID been overwritten through debugfs for + * testing? Do not modify outside of drm_edid_override_set() and + * drm_edid_override_reset(). + */ bool override_edid; + /** @epoch_counter: used to detect any other changes in connector, besides status */ + u64 epoch_counter; /** * @possible_encoders: Bit mask of encoders that can drive this @@ -1357,6 +1614,12 @@ struct drm_connector { * rev1.1 4.2.2.6 */ bool edid_corrupt; + /** + * @real_edid_checksum: real edid checksum for corrupted edid block. + * Required in Displayport 1.4 compliance testing + * rev1.1 4.2.2.6 + */ + u8 real_edid_checksum; /** @debugfs_entry: debugfs directory for this connector */ struct dentry *debugfs_entry; @@ -1435,6 +1698,11 @@ int drm_connector_init_with_ddc(struct drm_device *dev, const struct drm_connector_funcs *funcs, int connector_type, struct i2c_adapter *ddc); +int drmm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type, + struct i2c_adapter *ddc); void drm_connector_attach_edid_property(struct drm_connector *connector); int drm_connector_register(struct drm_connector *connector); void drm_connector_unregister(struct drm_connector *connector); @@ -1512,6 +1780,8 @@ drm_connector_is_unregistered(struct drm_connector *connector) DRM_CONNECTOR_UNREGISTERED; } +void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode); +const char *drm_get_connector_type_name(unsigned int connector_type); const char *drm_get_connector_status_name(enum drm_connector_status status); const char *drm_get_subpixel_order_name(enum subpixel_order order); const char *drm_get_dpms_name(int val); @@ -1519,10 +1789,13 @@ const char *drm_get_dvi_i_subconnector_name(int val); const char *drm_get_dvi_i_select_name(int val); const char *drm_get_tv_subconnector_name(int val); const char *drm_get_tv_select_name(int val); +const char *drm_get_dp_subconnector_name(int val); const char *drm_get_content_protection_name(int val); const char *drm_get_hdcp_content_type_name(int val); int drm_mode_create_dvi_i_properties(struct drm_device *dev); +void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector); + int drm_mode_create_tv_margin_properties(struct drm_device *dev); int drm_mode_create_tv_properties(struct drm_device *dev, unsigned int num_modes, @@ -1534,13 +1807,14 @@ int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, u32 scaling_mode_mask); int drm_connector_attach_vrr_capable_property( struct drm_connector *connector); +int drm_connector_attach_colorspace_property(struct drm_connector *connector); +int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector); +bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state, + struct drm_connector_state *new_state); int drm_mode_create_aspect_ratio_property(struct drm_device *dev); int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector); int drm_mode_create_dp_colorspace_property(struct drm_connector *connector); int drm_mode_create_content_type_property(struct drm_device *dev); -void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, - const struct drm_connector_state *conn_state); - int drm_mode_create_suggested_offset_properties(struct drm_device *dev); int drm_connector_set_path_property(struct drm_connector *connector, @@ -1552,10 +1826,23 @@ void drm_connector_set_link_status_property(struct drm_connector *connector, uint64_t link_status); void drm_connector_set_vrr_capable_property( struct drm_connector *connector, bool capable); -int drm_connector_init_panel_orientation_property( - struct drm_connector *connector, int width, int height); +int drm_connector_set_panel_orientation( + struct drm_connector *connector, + enum drm_panel_orientation panel_orientation); +int drm_connector_set_panel_orientation_with_quirk( + struct drm_connector *connector, + enum drm_panel_orientation panel_orientation, + int width, int height); +int drm_connector_set_orientation_from_panel( + struct drm_connector *connector, + struct drm_panel *panel); int drm_connector_attach_max_bpc_property(struct drm_connector *connector, int min, int max); +void drm_connector_create_privacy_screen_properties(struct drm_connector *conn); +void drm_connector_attach_privacy_screen_properties(struct drm_connector *conn); +void drm_connector_attach_privacy_screen_provider( + struct drm_connector *connector, struct drm_privacy_screen *priv); +void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state); /** * struct drm_tile_group - Tile group metadata @@ -1575,9 +1862,9 @@ struct drm_tile_group { }; struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, - char topology[8]); + const char topology[8]); struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, - char topology[8]); + const char topology[8]); void drm_mode_put_tile_group(struct drm_device *dev, struct drm_tile_group *tg); @@ -1589,6 +1876,11 @@ void drm_mode_put_tile_group(struct drm_device *dev, * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and * drm_connector_list_iter_next() respectively the convenience macro * drm_for_each_connector_iter(). + * + * Note that the return value of drm_connector_list_iter_next() is only valid + * up to the next drm_connector_list_iter_next() or + * drm_connector_list_iter_end() call. If you want to use the connector later, + * then you need to grab your own reference first using drm_connector_get(). */ struct drm_connector_list_iter { /* private: */ |