diff options
Diffstat (limited to 'include/linux/amba')
| -rw-r--r-- | include/linux/amba/bus.h | 74 | ||||
| -rw-r--r-- | include/linux/amba/mmci.h | 6 | ||||
| -rw-r--r-- | include/linux/amba/pl022.h | 10 |
3 files changed, 27 insertions, 63 deletions
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 26f0ecf401ea..5001e14c5c06 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -65,19 +65,33 @@ struct amba_device { struct device dev; struct resource res; struct clk *pclk; + struct device_dma_parameters dma_parms; unsigned int periphid; + struct mutex periphid_lock; unsigned int cid; struct amba_cs_uci_id uci; unsigned int irq[AMBA_NR_IRQS]; - char *driver_override; + /* + * Driver name to force a match. Do not set directly, because core + * frees it. Use driver_set_override() to set or clear it. + */ + const char *driver_override; }; struct amba_driver { struct device_driver drv; int (*probe)(struct amba_device *, const struct amba_id *); - int (*remove)(struct amba_device *); + void (*remove)(struct amba_device *); void (*shutdown)(struct amba_device *); const struct amba_id *id_table; + /* + * For most device drivers, no need to care about this flag as long as + * all DMAs are handled through the kernel DMA API. For some special + * ones, for example VFIO drivers, they know how to manage the DMA + * themselves and set this flag so that the IOMMU layer will allow them + * to setup and manage their own I/O address space. + */ + bool driver_managed_dma; }; /* @@ -89,14 +103,8 @@ enum amba_vendor { AMBA_VENDOR_ST = 0x80, AMBA_VENDOR_QCOM = 0x51, AMBA_VENDOR_LSI = 0xb6, - AMBA_VENDOR_LINUX = 0xfe, /* This value is not official */ }; -/* This is used to generate pseudo-ID for AMBA device */ -#define AMBA_LINUX_ID(conf, rev, part) \ - (((conf) & 0xff) << 24 | ((rev) & 0xf) << 20 | \ - AMBA_VENDOR_LINUX << 12 | ((part) & 0xfff)) - extern struct bus_type amba_bustype; #define to_amba_device(d) container_of(d, struct amba_device, dev) @@ -104,55 +112,27 @@ extern struct bus_type amba_bustype; #define amba_get_drvdata(d) dev_get_drvdata(&d->dev) #define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p) +#ifdef CONFIG_ARM_AMBA int amba_driver_register(struct amba_driver *); void amba_driver_unregister(struct amba_driver *); +#else +static inline int amba_driver_register(struct amba_driver *drv) +{ + return -EINVAL; +} +static inline void amba_driver_unregister(struct amba_driver *drv) +{ +} +#endif + struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t); void amba_device_put(struct amba_device *); int amba_device_add(struct amba_device *, struct resource *); int amba_device_register(struct amba_device *, struct resource *); -struct amba_device *amba_apb_device_add(struct device *parent, const char *name, - resource_size_t base, size_t size, - int irq1, int irq2, void *pdata, - unsigned int periphid); -struct amba_device *amba_ahb_device_add(struct device *parent, const char *name, - resource_size_t base, size_t size, - int irq1, int irq2, void *pdata, - unsigned int periphid); -struct amba_device * -amba_apb_device_add_res(struct device *parent, const char *name, - resource_size_t base, size_t size, int irq1, - int irq2, void *pdata, unsigned int periphid, - struct resource *resbase); -struct amba_device * -amba_ahb_device_add_res(struct device *parent, const char *name, - resource_size_t base, size_t size, int irq1, - int irq2, void *pdata, unsigned int periphid, - struct resource *resbase); void amba_device_unregister(struct amba_device *); -struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); int amba_request_regions(struct amba_device *, const char *); void amba_release_regions(struct amba_device *); -static inline int amba_pclk_enable(struct amba_device *dev) -{ - return clk_enable(dev->pclk); -} - -static inline void amba_pclk_disable(struct amba_device *dev) -{ - clk_disable(dev->pclk); -} - -static inline int amba_pclk_prepare(struct amba_device *dev) -{ - return clk_prepare(dev->pclk); -} - -static inline void amba_pclk_unprepare(struct amba_device *dev) -{ - clk_unprepare(dev->pclk); -} - /* Some drivers don't use the struct amba_device */ #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index c92ebc39fc1f..6f96dc2209c0 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -13,17 +13,11 @@ * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @ios_handler: a callback function to act on specfic ios changes, - * used for example to control a levelshifter - * mask into a value to be binary (or set some other custom bits - * in MMCIPWR) or:ed and written into the MMCIPWR register of the - * block. May also control external power based on the power_mode. * @status: if no GPIO line was given to the block in this function will * be called to determine whether a card is present in the MMC slot or not */ struct mmci_platform_data { unsigned int ocr_mask; - int (*ios_handler)(struct device *, struct mmc_ios *); unsigned int (*status)(struct device *); }; diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 131b27c97209..9bf58aac0df2 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -223,10 +223,6 @@ struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. * @bus_id: identifier for this bus - * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects - 1. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. * @enable_dma: if true enables DMA driven transfers. * @dma_rx_param: parameter to locate an RX DMA channel. * @dma_tx_param: parameter to locate a TX DMA channel. @@ -235,18 +231,15 @@ struct dma_chan; * indicates no delay and the device will be suspended immediately. * @rt: indicates the controller should run the message pump with realtime * priority to minimise the transfer latency on the bus. - * @chipselects: list of <num_chipselects> chip select gpios */ struct pl022_ssp_controller { u16 bus_id; - u8 num_chipselect; u8 enable_dma:1; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; int autosuspend_delay; bool rt; - int *chipselects; }; /** @@ -265,8 +258,6 @@ struct pl022_ssp_controller { * @duplex: Microwire interface: Full/Half duplex * @clkdelay: on the PL023 variant, the delay in feeback clock cycles * before sampling the incoming line - * @cs_control: function pointer to board-specific function to - * assert/deassert I/O port to control HW generation of devices chip-select. */ struct pl022_config_chip { enum ssp_interface iface; @@ -280,7 +271,6 @@ struct pl022_config_chip { enum ssp_microwire_wait_state wait_state; enum ssp_duplex duplex; enum ssp_clkdelay clkdelay; - void (*cs_control) (u32 control); }; #endif /* _SSP_PL022_H */ |