diff options
Diffstat (limited to 'include/linux/avf/virtchnl.h')
| -rw-r--r-- | include/linux/avf/virtchnl.h | 748 |
1 files changed, 729 insertions, 19 deletions
diff --git a/include/linux/avf/virtchnl.h b/include/linux/avf/virtchnl.h index ca956b672ac0..2ce27e8e4f19 100644 --- a/include/linux/avf/virtchnl.h +++ b/include/linux/avf/virtchnl.h @@ -136,6 +136,19 @@ enum virtchnl_ops { VIRTCHNL_OP_DISABLE_CHANNELS = 31, VIRTCHNL_OP_ADD_CLOUD_FILTER = 32, VIRTCHNL_OP_DEL_CLOUD_FILTER = 33, + /* opcode 34 - 44 are reserved */ + VIRTCHNL_OP_ADD_RSS_CFG = 45, + VIRTCHNL_OP_DEL_RSS_CFG = 46, + VIRTCHNL_OP_ADD_FDIR_FILTER = 47, + VIRTCHNL_OP_DEL_FDIR_FILTER = 48, + VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51, + VIRTCHNL_OP_ADD_VLAN_V2 = 52, + VIRTCHNL_OP_DEL_VLAN_V2 = 53, + VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54, + VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55, + VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56, + VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57, + VIRTCHNL_OP_MAX, }; /* These macros are used to generate compilation errors if a structure/union @@ -232,24 +245,27 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource); * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including * TX/RX Checksum offloading and TSO for non-tunnelled packets. */ -#define VIRTCHNL_VF_OFFLOAD_L2 0x00000001 -#define VIRTCHNL_VF_OFFLOAD_IWARP 0x00000002 -#define VIRTCHNL_VF_OFFLOAD_RSVD 0x00000004 -#define VIRTCHNL_VF_OFFLOAD_RSS_AQ 0x00000008 -#define VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010 -#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020 -#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES 0x00000040 -#define VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000 -#define VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000 -#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000 -#define VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000 -#define VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000 -#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000 -#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM 0X00400000 -#define VIRTCHNL_VF_OFFLOAD_ADQ 0X00800000 - -/* Define below the capability flags that are not offloads */ -#define VIRTCHNL_VF_CAP_ADV_LINK_SPEED 0x00000080 +#define VIRTCHNL_VF_OFFLOAD_L2 BIT(0) +#define VIRTCHNL_VF_OFFLOAD_IWARP BIT(1) +#define VIRTCHNL_VF_OFFLOAD_RSS_AQ BIT(3) +#define VIRTCHNL_VF_OFFLOAD_RSS_REG BIT(4) +#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR BIT(5) +#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES BIT(6) +/* used to negotiate communicating link speeds in Mbps */ +#define VIRTCHNL_VF_CAP_ADV_LINK_SPEED BIT(7) +#define VIRTCHNL_VF_OFFLOAD_VLAN_V2 BIT(15) +#define VIRTCHNL_VF_OFFLOAD_VLAN BIT(16) +#define VIRTCHNL_VF_OFFLOAD_RX_POLLING BIT(17) +#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 BIT(18) +#define VIRTCHNL_VF_OFFLOAD_RSS_PF BIT(19) +#define VIRTCHNL_VF_OFFLOAD_ENCAP BIT(20) +#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM BIT(21) +#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM BIT(22) +#define VIRTCHNL_VF_OFFLOAD_ADQ BIT(23) +#define VIRTCHNL_VF_OFFLOAD_USO BIT(25) +#define VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF BIT(27) +#define VIRTCHNL_VF_OFFLOAD_FDIR_PF BIT(28) + #define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \ VIRTCHNL_VF_OFFLOAD_VLAN | \ VIRTCHNL_VF_OFFLOAD_RSS_PF) @@ -403,9 +419,36 @@ VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select); * PF removes the filters and returns status. */ +/* VIRTCHNL_ETHER_ADDR_LEGACY + * Prior to adding the @type member to virtchnl_ether_addr, there were 2 pad + * bytes. Moving forward all VF drivers should not set type to + * VIRTCHNL_ETHER_ADDR_LEGACY. This is only here to not break previous/legacy + * behavior. The control plane function (i.e. PF) can use a best effort method + * of tracking the primary/device unicast in this case, but there is no + * guarantee and functionality depends on the implementation of the PF. + */ + +/* VIRTCHNL_ETHER_ADDR_PRIMARY + * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_PRIMARY for the + * primary/device unicast MAC address filter for VIRTCHNL_OP_ADD_ETH_ADDR and + * VIRTCHNL_OP_DEL_ETH_ADDR. This allows for the underlying control plane + * function (i.e. PF) to accurately track and use this MAC address for + * displaying on the host and for VM/function reset. + */ + +/* VIRTCHNL_ETHER_ADDR_EXTRA + * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_EXTRA for any extra + * unicast and/or multicast filters that are being added/deleted via + * VIRTCHNL_OP_DEL_ETH_ADDR/VIRTCHNL_OP_ADD_ETH_ADDR respectively. + */ struct virtchnl_ether_addr { u8 addr[ETH_ALEN]; - u8 pad[2]; + u8 type; +#define VIRTCHNL_ETHER_ADDR_LEGACY 0 +#define VIRTCHNL_ETHER_ADDR_PRIMARY 1 +#define VIRTCHNL_ETHER_ADDR_EXTRA 2 +#define VIRTCHNL_ETHER_ADDR_TYPE_MASK 3 /* first two bits of type are valid */ + u8 pad; }; VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr); @@ -440,6 +483,351 @@ struct virtchnl_vlan_filter_list { VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list); +/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related + * structures and opcodes. + * + * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver + * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED. + * + * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype. + * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype. + * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype. + * + * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported + * by the PF concurrently. For example, if the PF can support + * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it + * would OR the following bits: + * + * VIRTHCNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * The VF would interpret this as VLAN filtering can be supported on both 0x8100 + * and 0x88A8 VLAN ethertypes. + * + * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported + * by the PF concurrently. For example if the PF can support + * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping + * offload it would OR the following bits: + * + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * The VF would interpret this as VLAN stripping can be supported on either + * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via + * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override + * the previously set value. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or + * strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware + * offloaded VLAN tags using the L2TAG2 field of the Tx descriptor. + * + * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware + * offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor. + * + * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for + * VLAN filtering if the underlying PF supports it. + * + * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a + * certain VLAN capability can be toggled. For example if the underlying PF/CP + * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should + * set this bit along with the supported ethertypes. + */ +enum virtchnl_vlan_support { + VIRTCHNL_VLAN_UNSUPPORTED = 0, + VIRTCHNL_VLAN_ETHERTYPE_8100 = BIT(0), + VIRTCHNL_VLAN_ETHERTYPE_88A8 = BIT(1), + VIRTCHNL_VLAN_ETHERTYPE_9100 = BIT(2), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 = BIT(8), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 = BIT(9), + VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 = BIT(10), + VIRTCHNL_VLAN_PRIO = BIT(24), + VIRTCHNL_VLAN_FILTER_MASK = BIT(28), + VIRTCHNL_VLAN_ETHERTYPE_AND = BIT(29), + VIRTCHNL_VLAN_ETHERTYPE_XOR = BIT(30), + VIRTCHNL_VLAN_TOGGLE = BIT(31), +}; + +/* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS + * for filtering, insertion, and stripping capabilities. + * + * If only outer capabilities are supported (for filtering, insertion, and/or + * stripping) then this refers to the outer most or single VLAN from the VF's + * perspective. + * + * If only inner capabilities are supported (for filtering, insertion, and/or + * stripping) then this refers to the outer most or single VLAN from the VF's + * perspective. Functionally this is the same as if only outer capabilities are + * supported. The VF driver is just forced to use the inner fields when + * adding/deleting filters and enabling/disabling offloads (if supported). + * + * If both outer and inner capabilities are supported (for filtering, insertion, + * and/or stripping) then outer refers to the outer most or single VLAN and + * inner refers to the second VLAN, if it exists, in the packet. + * + * There is no support for tunneled VLAN offloads, so outer or inner are never + * referring to a tunneled packet from the VF's perspective. + */ +struct virtchnl_vlan_supported_caps { + u32 outer; + u32 inner; +}; + +/* The PF populates these fields based on the supported VLAN filtering. If a + * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will + * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using + * the unsupported fields. + * + * Also, a VF is only allowed to toggle its VLAN filtering setting if the + * VIRTCHNL_VLAN_TOGGLE bit is set. + * + * The ethertype(s) specified in the ethertype_init field are the ethertypes + * enabled for VLAN filtering. VLAN filtering in this case refers to the outer + * most VLAN from the VF's perspective. If both inner and outer filtering are + * allowed then ethertype_init only refers to the outer most VLAN as only + * VLAN ethertype supported for inner VLAN filtering is + * VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled + * when both inner and outer filtering are allowed. + * + * The max_filters field tells the VF how many VLAN filters it's allowed to have + * at any one time. If it exceeds this amount and tries to add another filter, + * then the request will be rejected by the PF. To prevent failures, the VF + * should keep track of how many VLAN filters it has added and not attempt to + * add more than max_filters. + */ +struct virtchnl_vlan_filtering_caps { + struct virtchnl_vlan_supported_caps filtering_support; + u32 ethertype_init; + u16 max_filters; + u8 pad[2]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps); + +/* This enum is used for the virtchnl_vlan_offload_caps structure to specify + * if the PF supports a different ethertype for stripping and insertion. + * + * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified + * for stripping affect the ethertype(s) specified for insertion and visa versa + * as well. If the VF tries to configure VLAN stripping via + * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then + * that will be the ethertype for both stripping and insertion. + * + * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for + * stripping do not affect the ethertype(s) specified for insertion and visa + * versa. + */ +enum virtchnl_vlan_ethertype_match { + VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0, + VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1, +}; + +/* The PF populates these fields based on the supported VLAN offloads. If a + * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will + * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or + * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields. + * + * Also, a VF is only allowed to toggle its VLAN offload setting if the + * VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set. + * + * The VF driver needs to be aware of how the tags are stripped by hardware and + * inserted by the VF driver based on the level of offload support. The PF will + * populate these fields based on where the VLAN tags are expected to be + * offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to + * interpret these fields. See the definition of the + * VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support + * enumeration. + */ +struct virtchnl_vlan_offload_caps { + struct virtchnl_vlan_supported_caps stripping_support; + struct virtchnl_vlan_supported_caps insertion_support; + u32 ethertype_init; + u8 ethertype_match; + u8 pad[3]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps); + +/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS + * VF sends this message to determine its VLAN capabilities. + * + * PF will mark which capabilities it supports based on hardware support and + * current configuration. For example, if a port VLAN is configured the PF will + * not allow outer VLAN filtering, stripping, or insertion to be configured so + * it will block these features from the VF. + * + * The VF will need to cross reference its capabilities with the PFs + * capabilities in the response message from the PF to determine the VLAN + * support. + */ +struct virtchnl_vlan_caps { + struct virtchnl_vlan_filtering_caps filtering; + struct virtchnl_vlan_offload_caps offloads; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps); + +struct virtchnl_vlan { + u16 tci; /* tci[15:13] = PCP and tci[11:0] = VID */ + u16 tci_mask; /* only valid if VIRTCHNL_VLAN_FILTER_MASK set in + * filtering caps + */ + u16 tpid; /* 0x8100, 0x88a8, etc. and only type(s) set in + * filtering caps. Note that tpid here does not refer to + * VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the + * actual 2-byte VLAN TPID + */ + u8 pad[2]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan); + +struct virtchnl_vlan_filter { + struct virtchnl_vlan inner; + struct virtchnl_vlan outer; + u8 pad[16]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter); + +/* VIRTCHNL_OP_ADD_VLAN_V2 + * VIRTCHNL_OP_DEL_VLAN_V2 + * + * VF sends these messages to add/del one or more VLAN tag filters for Rx + * traffic. + * + * The PF attempts to add the filters and returns status. + * + * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the + * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS. + */ +struct virtchnl_vlan_filter_list_v2 { + u16 vport_id; + u16 num_elements; + u8 pad[4]; + struct virtchnl_vlan_filter filters[1]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2); + +/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 + * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 + * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 + * VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 + * + * VF sends this message to enable or disable VLAN stripping or insertion. It + * also needs to specify an ethertype. The VF knows which VLAN ethertypes are + * allowed and whether or not it's allowed to enable/disable the specific + * offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to + * parse the virtchnl_vlan_caps.offloads fields to determine which offload + * messages are allowed. + * + * For example, if the PF populates the virtchnl_vlan_caps.offloads in the + * following manner the VF will be allowed to enable and/or disable 0x8100 inner + * VLAN insertion and/or stripping via the opcodes listed above. Inner in this + * case means the outer most or single VLAN from the VF's perspective. This is + * because no outer offloads are supported. See the comments above the + * virtchnl_vlan_supported_caps structure for more details. + * + * virtchnl_vlan_caps.offloads.stripping_support.inner = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * virtchnl_vlan_caps.offloads.insertion_support.inner = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * In order to enable inner (again note that in this case inner is the outer + * most or single VLAN from the VF's perspective) VLAN stripping for 0x8100 + * VLANs, the VF would populate the virtchnl_vlan_setting structure in the + * following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. + * + * virtchnl_vlan_setting.inner_ethertype_setting = + * VIRTCHNL_VLAN_ETHERTYPE_8100; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + * + * The reason that VLAN TPID(s) are not being used for the + * outer_ethertype_setting and inner_ethertype_setting fields is because it's + * possible a device could support VLAN insertion and/or stripping offload on + * multiple ethertypes concurrently, so this method allows a VF to request + * multiple ethertypes in one message using the virtchnl_vlan_support + * enumeration. + * + * For example, if the PF populates the virtchnl_vlan_caps.offloads in the + * following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer + * VLAN insertion and stripping simultaneously. The + * virtchnl_vlan_caps.offloads.ethertype_match field will also have to be + * populated based on what the PF can support. + * + * virtchnl_vlan_caps.offloads.stripping_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * virtchnl_vlan_caps.offloads.insertion_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_AND; + * + * In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF + * would populate the virthcnl_vlan_offload_structure in the following manner + * and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. + * + * virtchnl_vlan_setting.outer_ethertype_setting = + * VIRTHCNL_VLAN_ETHERTYPE_8100 | + * VIRTHCNL_VLAN_ETHERTYPE_88A8; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + * + * There is also the case where a PF and the underlying hardware can support + * VLAN offloads on multiple ethertypes, but not concurrently. For example, if + * the PF populates the virtchnl_vlan_caps.offloads in the following manner the + * VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN + * offloads. The ethertypes must match for stripping and insertion. + * + * virtchnl_vlan_caps.offloads.stripping_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * virtchnl_vlan_caps.offloads.insertion_support.outer = + * VIRTCHNL_VLAN_TOGGLE | + * VIRTCHNL_VLAN_ETHERTYPE_8100 | + * VIRTCHNL_VLAN_ETHERTYPE_88A8 | + * VIRTCHNL_VLAN_ETHERTYPE_XOR; + * + * virtchnl_vlan_caps.offloads.ethertype_match = + * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION; + * + * In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would + * populate the virtchnl_vlan_setting structure in the following manner and send + * the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the + * ethertype for VLAN insertion if it's enabled. So, for completeness, a + * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent. + * + * virtchnl_vlan_setting.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8; + * + * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on + * initialization. + */ +struct virtchnl_vlan_setting { + u32 outer_ethertype_setting; + u32 inner_ethertype_setting; + u16 vport_id; + u8 pad[6]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_setting); + /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE * VF sends VSI id and flags. * PF returns status code in retval. @@ -557,6 +945,11 @@ enum virtchnl_action { /* action types */ VIRTCHNL_ACTION_DROP = 0, VIRTCHNL_ACTION_TC_REDIRECT, + VIRTCHNL_ACTION_PASSTHRU, + VIRTCHNL_ACTION_QUEUE, + VIRTCHNL_ACTION_Q_REGION, + VIRTCHNL_ACTION_MARK, + VIRTCHNL_ACTION_COUNT, }; enum virtchnl_flow_type { @@ -572,6 +965,7 @@ struct virtchnl_filter { enum virtchnl_action action; u32 action_meta; u8 field_flags; + u8 pad[3]; }; VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter); @@ -610,6 +1004,7 @@ struct virtchnl_pf_event { /* link_speed provided in Mbps */ u32 link_speed; u8 link_status; + u8 pad[3]; } link_event_adv; } event_data; @@ -635,6 +1030,7 @@ struct virtchnl_iwarp_qv_info { u16 ceq_idx; u16 aeq_idx; u8 itr_idx; + u8 pad[3]; }; VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info); @@ -663,6 +1059,286 @@ enum virtchnl_vfr_states { VIRTCHNL_VFR_VFACTIVE, }; +/* Type of RSS algorithm */ +enum virtchnl_rss_algorithm { + VIRTCHNL_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0, + VIRTCHNL_RSS_ALG_R_ASYMMETRIC = 1, + VIRTCHNL_RSS_ALG_TOEPLITZ_SYMMETRIC = 2, + VIRTCHNL_RSS_ALG_XOR_SYMMETRIC = 3, +}; + +#define VIRTCHNL_MAX_NUM_PROTO_HDRS 32 +#define PROTO_HDR_SHIFT 5 +#define PROTO_HDR_FIELD_START(proto_hdr_type) ((proto_hdr_type) << PROTO_HDR_SHIFT) +#define PROTO_HDR_FIELD_MASK ((1UL << PROTO_HDR_SHIFT) - 1) + +/* VF use these macros to configure each protocol header. + * Specify which protocol headers and protocol header fields base on + * virtchnl_proto_hdr_type and virtchnl_proto_hdr_field. + * @param hdr: a struct of virtchnl_proto_hdr + * @param hdr_type: ETH/IPV4/TCP, etc + * @param field: SRC/DST/TEID/SPI, etc + */ +#define VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, field) \ + ((hdr)->field_selector |= BIT((field) & PROTO_HDR_FIELD_MASK)) +#define VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, field) \ + ((hdr)->field_selector &= ~BIT((field) & PROTO_HDR_FIELD_MASK)) +#define VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val) \ + ((hdr)->field_selector & BIT((val) & PROTO_HDR_FIELD_MASK)) +#define VIRTCHNL_GET_PROTO_HDR_FIELD(hdr) ((hdr)->field_selector) + +#define VIRTCHNL_ADD_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \ + (VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, \ + VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field)) +#define VIRTCHNL_DEL_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \ + (VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, \ + VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field)) + +#define VIRTCHNL_SET_PROTO_HDR_TYPE(hdr, hdr_type) \ + ((hdr)->type = VIRTCHNL_PROTO_HDR_ ## hdr_type) +#define VIRTCHNL_GET_PROTO_HDR_TYPE(hdr) \ + (((hdr)->type) >> PROTO_HDR_SHIFT) +#define VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) \ + ((hdr)->type == ((val) >> PROTO_HDR_SHIFT)) +#define VIRTCHNL_TEST_PROTO_HDR(hdr, val) \ + (VIRTCHNL_TEST_PROTO_HDR_TYPE((hdr), (val)) && \ + VIRTCHNL_TEST_PROTO_HDR_FIELD((hdr), (val))) + +/* Protocol header type within a packet segment. A segment consists of one or + * more protocol headers that make up a logical group of protocol headers. Each + * logical group of protocol headers encapsulates or is encapsulated using/by + * tunneling or encapsulation protocols for network virtualization. + */ +enum virtchnl_proto_hdr_type { + VIRTCHNL_PROTO_HDR_NONE, + VIRTCHNL_PROTO_HDR_ETH, + VIRTCHNL_PROTO_HDR_S_VLAN, + VIRTCHNL_PROTO_HDR_C_VLAN, + VIRTCHNL_PROTO_HDR_IPV4, + VIRTCHNL_PROTO_HDR_IPV6, + VIRTCHNL_PROTO_HDR_TCP, + VIRTCHNL_PROTO_HDR_UDP, + VIRTCHNL_PROTO_HDR_SCTP, + VIRTCHNL_PROTO_HDR_GTPU_IP, + VIRTCHNL_PROTO_HDR_GTPU_EH, + VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN, + VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP, + VIRTCHNL_PROTO_HDR_PPPOE, + VIRTCHNL_PROTO_HDR_L2TPV3, + VIRTCHNL_PROTO_HDR_ESP, + VIRTCHNL_PROTO_HDR_AH, + VIRTCHNL_PROTO_HDR_PFCP, +}; + +/* Protocol header field within a protocol header. */ +enum virtchnl_proto_hdr_field { + /* ETHER */ + VIRTCHNL_PROTO_HDR_ETH_SRC = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ETH), + VIRTCHNL_PROTO_HDR_ETH_DST, + VIRTCHNL_PROTO_HDR_ETH_ETHERTYPE, + /* S-VLAN */ + VIRTCHNL_PROTO_HDR_S_VLAN_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_S_VLAN), + /* C-VLAN */ + VIRTCHNL_PROTO_HDR_C_VLAN_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_C_VLAN), + /* IPV4 */ + VIRTCHNL_PROTO_HDR_IPV4_SRC = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4), + VIRTCHNL_PROTO_HDR_IPV4_DST, + VIRTCHNL_PROTO_HDR_IPV4_DSCP, + VIRTCHNL_PROTO_HDR_IPV4_TTL, + VIRTCHNL_PROTO_HDR_IPV4_PROT, + /* IPV6 */ + VIRTCHNL_PROTO_HDR_IPV6_SRC = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6), + VIRTCHNL_PROTO_HDR_IPV6_DST, + VIRTCHNL_PROTO_HDR_IPV6_TC, + VIRTCHNL_PROTO_HDR_IPV6_HOP_LIMIT, + VIRTCHNL_PROTO_HDR_IPV6_PROT, + /* TCP */ + VIRTCHNL_PROTO_HDR_TCP_SRC_PORT = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_TCP), + VIRTCHNL_PROTO_HDR_TCP_DST_PORT, + /* UDP */ + VIRTCHNL_PROTO_HDR_UDP_SRC_PORT = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_UDP), + VIRTCHNL_PROTO_HDR_UDP_DST_PORT, + /* SCTP */ + VIRTCHNL_PROTO_HDR_SCTP_SRC_PORT = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_SCTP), + VIRTCHNL_PROTO_HDR_SCTP_DST_PORT, + /* GTPU_IP */ + VIRTCHNL_PROTO_HDR_GTPU_IP_TEID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_IP), + /* GTPU_EH */ + VIRTCHNL_PROTO_HDR_GTPU_EH_PDU = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH), + VIRTCHNL_PROTO_HDR_GTPU_EH_QFI, + /* PPPOE */ + VIRTCHNL_PROTO_HDR_PPPOE_SESS_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PPPOE), + /* L2TPV3 */ + VIRTCHNL_PROTO_HDR_L2TPV3_SESS_ID = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV3), + /* ESP */ + VIRTCHNL_PROTO_HDR_ESP_SPI = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ESP), + /* AH */ + VIRTCHNL_PROTO_HDR_AH_SPI = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_AH), + /* PFCP */ + VIRTCHNL_PROTO_HDR_PFCP_S_FIELD = + PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PFCP), + VIRTCHNL_PROTO_HDR_PFCP_SEID, +}; + +struct virtchnl_proto_hdr { + enum virtchnl_proto_hdr_type type; + u32 field_selector; /* a bit mask to select field for header type */ + u8 buffer[64]; + /** + * binary buffer in network order for specific header type. + * For example, if type = VIRTCHNL_PROTO_HDR_IPV4, a IPv4 + * header is expected to be copied into the buffer. + */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_proto_hdr); + +struct virtchnl_proto_hdrs { + u8 tunnel_level; + u8 pad[3]; + /** + * specify where protocol header start from. + * 0 - from the outer layer + * 1 - from the first inner layer + * 2 - from the second inner layer + * .... + **/ + int count; /* the proto layers must < VIRTCHNL_MAX_NUM_PROTO_HDRS */ + struct virtchnl_proto_hdr proto_hdr[VIRTCHNL_MAX_NUM_PROTO_HDRS]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs); + +struct virtchnl_rss_cfg { + struct virtchnl_proto_hdrs proto_hdrs; /* protocol headers */ + enum virtchnl_rss_algorithm rss_algorithm; /* RSS algorithm type */ + u8 reserved[128]; /* reserve for future */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2444, virtchnl_rss_cfg); + +/* action configuration for FDIR */ +struct virtchnl_filter_action { + enum virtchnl_action type; + union { + /* used for queue and qgroup action */ + struct { + u16 index; + u8 region; + } queue; + /* used for count action */ + struct { + /* share counter ID with other flow rules */ + u8 shared; + u32 id; /* counter ID */ + } count; + /* used for mark action */ + u32 mark_id; + u8 reserve[32]; + } act_conf; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_filter_action); + +#define VIRTCHNL_MAX_NUM_ACTIONS 8 + +struct virtchnl_filter_action_set { + /* action number must be less then VIRTCHNL_MAX_NUM_ACTIONS */ + int count; + struct virtchnl_filter_action actions[VIRTCHNL_MAX_NUM_ACTIONS]; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(292, virtchnl_filter_action_set); + +/* pattern and action for FDIR rule */ +struct virtchnl_fdir_rule { + struct virtchnl_proto_hdrs proto_hdrs; + struct virtchnl_filter_action_set action_set; +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2604, virtchnl_fdir_rule); + +/* Status returned to VF after VF requests FDIR commands + * VIRTCHNL_FDIR_SUCCESS + * VF FDIR related request is successfully done by PF + * The request can be OP_ADD/DEL. + * + * VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE + * OP_ADD_FDIR_FILTER request is failed due to no Hardware resource. + * + * VIRTCHNL_FDIR_FAILURE_RULE_EXIST + * OP_ADD_FDIR_FILTER request is failed due to the rule is already existed. + * + * VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT + * OP_ADD_FDIR_FILTER request is failed due to conflict with existing rule. + * + * VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST + * OP_DEL_FDIR_FILTER request is failed due to this rule doesn't exist. + * + * VIRTCHNL_FDIR_FAILURE_RULE_INVALID + * OP_ADD_FDIR_FILTER request is failed due to parameters validation + * or HW doesn't support. + * + * VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT + * OP_ADD/DEL_FDIR_FILTER request is failed due to timing out + * for programming. + */ +enum virtchnl_fdir_prgm_status { + VIRTCHNL_FDIR_SUCCESS = 0, + VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE, + VIRTCHNL_FDIR_FAILURE_RULE_EXIST, + VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT, + VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST, + VIRTCHNL_FDIR_FAILURE_RULE_INVALID, + VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT, +}; + +/* VIRTCHNL_OP_ADD_FDIR_FILTER + * VF sends this request to PF by filling out vsi_id, + * validate_only and rule_cfg. PF will return flow_id + * if the request is successfully done and return add_status to VF. + */ +struct virtchnl_fdir_add { + u16 vsi_id; /* INPUT */ + /* + * 1 for validating a fdir rule, 0 for creating a fdir rule. + * Validate and create share one ops: VIRTCHNL_OP_ADD_FDIR_FILTER. + */ + u16 validate_only; /* INPUT */ + u32 flow_id; /* OUTPUT */ + struct virtchnl_fdir_rule rule_cfg; /* INPUT */ + enum virtchnl_fdir_prgm_status status; /* OUTPUT */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(2616, virtchnl_fdir_add); + +/* VIRTCHNL_OP_DEL_FDIR_FILTER + * VF sends this request to PF by filling out vsi_id + * and flow_id. PF will return del_status to VF. + */ +struct virtchnl_fdir_del { + u16 vsi_id; /* INPUT */ + u16 pad; + u32 flow_id; /* INPUT */ + enum virtchnl_fdir_prgm_status status; /* OUTPUT */ +}; + +VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_fdir_del); + /** * virtchnl_vc_validate_vf_msg * @ver: Virtchnl version info @@ -823,6 +1499,40 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode, case VIRTCHNL_OP_DEL_CLOUD_FILTER: valid_len = sizeof(struct virtchnl_filter); break; + case VIRTCHNL_OP_ADD_RSS_CFG: + case VIRTCHNL_OP_DEL_RSS_CFG: + valid_len = sizeof(struct virtchnl_rss_cfg); + break; + case VIRTCHNL_OP_ADD_FDIR_FILTER: + valid_len = sizeof(struct virtchnl_fdir_add); + break; + case VIRTCHNL_OP_DEL_FDIR_FILTER: + valid_len = sizeof(struct virtchnl_fdir_del); + break; + case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS: + break; + case VIRTCHNL_OP_ADD_VLAN_V2: + case VIRTCHNL_OP_DEL_VLAN_V2: + valid_len = sizeof(struct virtchnl_vlan_filter_list_v2); + if (msglen >= valid_len) { + struct virtchnl_vlan_filter_list_v2 *vfl = + (struct virtchnl_vlan_filter_list_v2 *)msg; + + valid_len += (vfl->num_elements - 1) * + sizeof(struct virtchnl_vlan_filter); + + if (vfl->num_elements == 0) { + err_msg_format = true; + break; + } + } + break; + case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2: + case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2: + case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2: + case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2: + valid_len = sizeof(struct virtchnl_vlan_setting); + break; /* These are always errors coming from the VF. */ case VIRTCHNL_OP_EVENT: case VIRTCHNL_OP_UNKNOWN: |