3 files changed, 64 insertions, 18 deletions

diff --git a/include/linux/dma/dw.h b/include/linux/dma/dw.h
index e166cac8e870..9752f3745f76 100644
--- a/include/linux/dma/dw.h
+++ b/include/linux/dma/dw.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Driver for the Synopsys DesignWare DMA Controller
  *
  * Copyright (C) 2007 Atmel Corporation
  * Copyright (C) 2010-2011 ST Microelectronics
  * Copyright (C) 2014 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef _DMA_DW_H
 #define _DMA_DW_H
@@ -45,9 +42,13 @@ struct dw_dma_chip {
 #if IS_ENABLED(CONFIG_DW_DMAC_CORE)
 int dw_dma_probe(struct dw_dma_chip *chip);
 int dw_dma_remove(struct dw_dma_chip *chip);
+int idma32_dma_probe(struct dw_dma_chip *chip);
+int idma32_dma_remove(struct dw_dma_chip *chip);
 #else
 static inline int dw_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; }
 static inline int dw_dma_remove(struct dw_dma_chip *chip) { return 0; }
+static inline int idma32_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; }
+static inline int idma32_dma_remove(struct dw_dma_chip *chip) { return 0; }
 #endif /* CONFIG_DW_DMAC_CORE */
 
 #endif /* _DMA_DW_H */
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index 9fc594f69eff..fceb5df07097 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -23,15 +23,4 @@ struct pxad_param {
 	enum pxad_chan_prio prio;
 };
 
-struct dma_chan;
-
-#ifdef CONFIG_PXA_DMA
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
-#else
-static inline bool pxad_filter_fn(struct dma_chan *chan, void *param)
-{
-	return false;
-}
-#endif
-
 #endif /* _PXA_DMA_H_ */
diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h
index b42b80e52cc2..ab82df64682a 100644
--- a/include/linux/dma/sprd-dma.h
+++ b/include/linux/dma/sprd-dma.h
@@ -3,9 +3,65 @@
 #ifndef _SPRD_DMA_H_
 #define _SPRD_DMA_H_
 
-#define SPRD_DMA_REQ_SHIFT 16
-#define SPRD_DMA_FLAGS(req_mode, int_type) \
-	((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
+#define SPRD_DMA_REQ_SHIFT	8
+#define SPRD_DMA_TRG_MODE_SHIFT	16
+#define SPRD_DMA_CHN_MODE_SHIFT	24
+#define SPRD_DMA_FLAGS(chn_mode, trg_mode, req_mode, int_type) \
+	((chn_mode) << SPRD_DMA_CHN_MODE_SHIFT | \
+	(trg_mode) << SPRD_DMA_TRG_MODE_SHIFT | \
+	(req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
+
+/*
+ * The Spreadtrum DMA controller supports channel 2-stage tansfer, that means
+ * we can request 2 dma channels, one for source channel, and another one for
+ * destination channel. Each channel is independent, and has its own
+ * configurations. Once the source channel's transaction is done, it will
+ * trigger the destination channel's transaction automatically by hardware
+ * signal.
+ *
+ * To support 2-stage tansfer, we must configure the channel mode and trigger
+ * mode as below definition.
+ */
+
+/*
+ * enum sprd_dma_chn_mode: define the DMA channel mode for 2-stage transfer
+ * @SPRD_DMA_CHN_MODE_NONE: No channel mode setting which means channel doesn't
+ * support the 2-stage transfer.
+ * @SPRD_DMA_SRC_CHN0: Channel used as source channel 0.
+ * @SPRD_DMA_SRC_CHN1: Channel used as source channel 1.
+ * @SPRD_DMA_DST_CHN0: Channel used as destination channel 0.
+ * @SPRD_DMA_DST_CHN1: Channel used as destination channel 1.
+ *
+ * Now the DMA controller can supports 2 groups 2-stage transfer.
+ */
+enum sprd_dma_chn_mode {
+	SPRD_DMA_CHN_MODE_NONE,
+	SPRD_DMA_SRC_CHN0,
+	SPRD_DMA_SRC_CHN1,
+	SPRD_DMA_DST_CHN0,
+	SPRD_DMA_DST_CHN1,
+};
+
+/*
+ * enum sprd_dma_trg_mode: define the DMA channel trigger mode for 2-stage
+ * transfer
+ * @SPRD_DMA_NO_TRG: No trigger setting.
+ * @SPRD_DMA_FRAG_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's fragment request is done.
+ * @SPRD_DMA_BLOCK_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's block request is done.
+ * @SPRD_DMA_TRANS_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's transfer request is done.
+ * @SPRD_DMA_LIST_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's link-list request is done.
+ */
+enum sprd_dma_trg_mode {
+	SPRD_DMA_NO_TRG,
+	SPRD_DMA_FRAG_DONE_TRG,
+	SPRD_DMA_BLOCK_DONE_TRG,
+	SPRD_DMA_TRANS_DONE_TRG,
+	SPRD_DMA_LIST_DONE_TRG,
+};
 
 /*
  * enum sprd_dma_req_mode: define the DMA request mode