diff options
Diffstat (limited to 'include/linux/iio/adc')
| -rw-r--r-- | include/linux/iio/adc/ad_sigma_delta.h | 106 | ||||
| -rw-r--r-- | include/linux/iio/adc/adi-axi-adc.h | 64 | ||||
| -rw-r--r-- | include/linux/iio/adc/qcom-vadc-common.h | 167 |
3 files changed, 276 insertions, 61 deletions
diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h index 5a127c0ed200..7852f6c9a714 100644 --- a/include/linux/iio/adc/ad_sigma_delta.h +++ b/include/linux/iio/adc/ad_sigma_delta.h @@ -26,31 +26,40 @@ struct ad_sd_calib_data { }; struct ad_sigma_delta; +struct device; struct iio_dev; /** * struct ad_sigma_delta_info - Sigma Delta driver specific callbacks and options * @set_channel: Will be called to select the current channel, may be NULL. + * @append_status: Will be called to enable status append at the end of the sample, may be NULL. * @set_mode: Will be called to select the current mode, may be NULL. + * @disable_all: Will be called to disable all channels, may be NULL. * @postprocess_sample: Is called for each sampled data word, can be used to * modify or drop the sample data, it, may be NULL. * @has_registers: true if the device has writable and readable registers, false * if there is just one read-only sample data shift register. * @addr_shift: Shift of the register address in the communications register. * @read_mask: Mask for the communications register having the read bit set. + * @status_ch_mask: Mask for the channel number stored in status register. * @data_reg: Address of the data register, if 0 the default address of 0x3 will * be used. * @irq_flags: flags for the interrupt used by the triggered buffer + * @num_slots: Number of sequencer slots */ struct ad_sigma_delta_info { int (*set_channel)(struct ad_sigma_delta *, unsigned int channel); + int (*append_status)(struct ad_sigma_delta *, bool append); int (*set_mode)(struct ad_sigma_delta *, enum ad_sigma_delta_mode mode); + int (*disable_all)(struct ad_sigma_delta *); int (*postprocess_sample)(struct ad_sigma_delta *, unsigned int raw_sample); bool has_registers; unsigned int addr_shift; unsigned int read_mask; + unsigned int status_ch_mask; unsigned int data_reg; unsigned long irq_flags; + unsigned int num_slots; }; /** @@ -75,12 +84,23 @@ struct ad_sigma_delta { uint8_t comm; const struct ad_sigma_delta_info *info; + unsigned int active_slots; + unsigned int current_slot; + unsigned int num_slots; + bool status_appended; + /* map slots to channels in order to know what to expect from devices */ + unsigned int *slots; + uint8_t *samples_buf; /* * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. + * 'tx_buf' is up to 32 bits. + * 'rx_buf' is up to 32 bits per sample + 64 bit timestamp, + * rounded to 16 bytes to take into account padding. */ - uint8_t data[4] ____cacheline_aligned; + uint8_t tx_buf[4] ____cacheline_aligned; + uint8_t rx_buf[16] __aligned(8); }; static inline int ad_sigma_delta_set_channel(struct ad_sigma_delta *sd, @@ -92,6 +112,29 @@ static inline int ad_sigma_delta_set_channel(struct ad_sigma_delta *sd, return 0; } +static inline int ad_sigma_delta_append_status(struct ad_sigma_delta *sd, bool append) +{ + int ret; + + if (sd->info->append_status) { + ret = sd->info->append_status(sd, append); + if (ret < 0) + return ret; + + sd->status_appended = append; + } + + return 0; +} + +static inline int ad_sigma_delta_disable_all(struct ad_sigma_delta *sd) +{ + if (sd->info->disable_all) + return sd->info->disable_all(sd); + + return 0; +} + static inline int ad_sigma_delta_set_mode(struct ad_sigma_delta *sd, unsigned int mode) { @@ -128,67 +171,8 @@ int ad_sd_calibrate_all(struct ad_sigma_delta *sigma_delta, int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev, struct spi_device *spi, const struct ad_sigma_delta_info *info); -int ad_sd_setup_buffer_and_trigger(struct iio_dev *indio_dev); -void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev); +int devm_ad_sd_setup_buffer_and_trigger(struct device *dev, struct iio_dev *indio_dev); int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig); -#define __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ - _storagebits, _shift, _extend_name, _type, _mask_all) \ - { \ - .type = (_type), \ - .differential = (_channel2 == -1 ? 0 : 1), \ - .indexed = 1, \ - .channel = (_channel1), \ - .channel2 = (_channel2), \ - .address = (_address), \ - .extend_name = (_extend_name), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_OFFSET), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_shared_by_all = _mask_all, \ - .scan_index = (_si), \ - .scan_type = { \ - .sign = 'u', \ - .realbits = (_bits), \ - .storagebits = (_storagebits), \ - .shift = (_shift), \ - .endianness = IIO_BE, \ - }, \ - } - -#define AD_SD_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ - _storagebits, _shift) \ - __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ - _storagebits, _shift, NULL, IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SAMP_FREQ)) - -#define AD_SD_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ - _storagebits, _shift) \ - __AD_SD_CHANNEL(_si, _channel, _channel, _address, _bits, \ - _storagebits, _shift, "shorted", IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SAMP_FREQ)) - -#define AD_SD_CHANNEL(_si, _channel, _address, _bits, \ - _storagebits, _shift) \ - __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ - _storagebits, _shift, NULL, IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SAMP_FREQ)) - -#define AD_SD_CHANNEL_NO_SAMP_FREQ(_si, _channel, _address, _bits, \ - _storagebits, _shift) \ - __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ - _storagebits, _shift, NULL, IIO_VOLTAGE, 0) - -#define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ - __AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \ - _storagebits, _shift, NULL, IIO_TEMP, \ - BIT(IIO_CHAN_INFO_SAMP_FREQ)) - -#define AD_SD_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ - _shift) \ - __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ - _storagebits, _shift, "supply", IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SAMP_FREQ)) - #endif diff --git a/include/linux/iio/adc/adi-axi-adc.h b/include/linux/iio/adc/adi-axi-adc.h new file mode 100644 index 000000000000..52620e5b8052 --- /dev/null +++ b/include/linux/iio/adc/adi-axi-adc.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Analog Devices Generic AXI ADC IP core driver/library + * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip + * + * Copyright 2012-2020 Analog Devices Inc. + */ +#ifndef __ADI_AXI_ADC_H__ +#define __ADI_AXI_ADC_H__ + +struct device; +struct iio_chan_spec; + +/** + * struct adi_axi_adc_chip_info - Chip specific information + * @name Chip name + * @id Chip ID (usually product ID) + * @channels Channel specifications of type @struct iio_chan_spec + * @num_channels Number of @channels + * @scale_table Supported scales by the chip; tuples of 2 ints + * @num_scales Number of scales in the table + * @max_rate Maximum sampling rate supported by the device + */ +struct adi_axi_adc_chip_info { + const char *name; + unsigned int id; + + const struct iio_chan_spec *channels; + unsigned int num_channels; + + const unsigned int (*scale_table)[2]; + int num_scales; + + unsigned long max_rate; +}; + +/** + * struct adi_axi_adc_conv - data of the ADC attached to the AXI ADC + * @chip_info chip info details for the client ADC + * @preenable_setup op to run in the client before enabling the AXI ADC + * @reg_access IIO debugfs_reg_access hook for the client ADC + * @read_raw IIO read_raw hook for the client ADC + * @write_raw IIO write_raw hook for the client ADC + */ +struct adi_axi_adc_conv { + const struct adi_axi_adc_chip_info *chip_info; + + int (*preenable_setup)(struct adi_axi_adc_conv *conv); + int (*reg_access)(struct adi_axi_adc_conv *conv, unsigned int reg, + unsigned int writeval, unsigned int *readval); + int (*read_raw)(struct adi_axi_adc_conv *conv, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask); + int (*write_raw)(struct adi_axi_adc_conv *conv, + struct iio_chan_spec const *chan, + int val, int val2, long mask); +}; + +struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, + size_t sizeof_priv); + +void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv); + +#endif diff --git a/include/linux/iio/adc/qcom-vadc-common.h b/include/linux/iio/adc/qcom-vadc-common.h new file mode 100644 index 000000000000..aa21b032e861 --- /dev/null +++ b/include/linux/iio/adc/qcom-vadc-common.h @@ -0,0 +1,167 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Code shared between the different Qualcomm PMIC voltage ADCs + */ + +#ifndef QCOM_VADC_COMMON_H +#define QCOM_VADC_COMMON_H + +#include <linux/math.h> +#include <linux/types.h> + +#define VADC_CONV_TIME_MIN_US 2000 +#define VADC_CONV_TIME_MAX_US 2100 + +/* Min ADC code represents 0V */ +#define VADC_MIN_ADC_CODE 0x6000 +/* Max ADC code represents full-scale range of 1.8V */ +#define VADC_MAX_ADC_CODE 0xa800 + +#define VADC_ABSOLUTE_RANGE_UV 625000 +#define VADC_RATIOMETRIC_RANGE 1800 + +#define VADC_DEF_PRESCALING 0 /* 1:1 */ +#define VADC_DEF_DECIMATION 0 /* 512 */ +#define VADC_DEF_HW_SETTLE_TIME 0 /* 0 us */ +#define VADC_DEF_AVG_SAMPLES 0 /* 1 sample */ +#define VADC_DEF_CALIB_TYPE VADC_CALIB_ABSOLUTE + +#define VADC_DECIMATION_MIN 512 +#define VADC_DECIMATION_MAX 4096 +#define ADC5_DEF_VBAT_PRESCALING 1 /* 1:3 */ +#define ADC5_DECIMATION_SHORT 250 +#define ADC5_DECIMATION_MEDIUM 420 +#define ADC5_DECIMATION_LONG 840 +/* Default decimation - 1024 for rev2, 840 for pmic5 */ +#define ADC5_DECIMATION_DEFAULT 2 +#define ADC5_DECIMATION_SAMPLES_MAX 3 + +#define VADC_HW_SETTLE_DELAY_MAX 10000 +#define VADC_HW_SETTLE_SAMPLES_MAX 16 +#define VADC_AVG_SAMPLES_MAX 512 +#define ADC5_AVG_SAMPLES_MAX 16 + +#define PMIC5_CHG_TEMP_SCALE_FACTOR 377500 +#define PMIC5_SMB_TEMP_CONSTANT 419400 +#define PMIC5_SMB_TEMP_SCALE_FACTOR 356 + +#define PMI_CHG_SCALE_1 -138890 +#define PMI_CHG_SCALE_2 391750000000LL + +#define VADC5_MAX_CODE 0x7fff +#define ADC5_FULL_SCALE_CODE 0x70e4 +#define ADC5_USR_DATA_CHECK 0x8000 + +#define R_PU_100K 100000 +#define RATIO_MAX_ADC7 BIT(14) + +/* + * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels. + * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for + * calibration. + */ +enum vadc_calibration { + VADC_CALIB_ABSOLUTE = 0, + VADC_CALIB_RATIOMETRIC +}; + +/** + * struct vadc_linear_graph - Represent ADC characteristics. + * @dy: numerator slope to calculate the gain. + * @dx: denominator slope to calculate the gain. + * @gnd: A/D word of the ground reference used for the channel. + * + * Each ADC device has different offset and gain parameters which are + * computed to calibrate the device. + */ +struct vadc_linear_graph { + s32 dy; + s32 dx; + s32 gnd; +}; + +/** + * enum vadc_scale_fn_type - Scaling function to convert ADC code to + * physical scaled units for the channel. + * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV). + * SCALE_THERM_100K_PULLUP: Returns temperature in millidegC. + * Uses a mapping table with 100K pullup. + * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade. + * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC. + * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp + * SCALE_HW_CALIB_DEFAULT: Default scaling to convert raw adc code to + * voltage (uV) with hardware applied offset/slope values to adc code. + * SCALE_HW_CALIB_THERM_100K_PULLUP: Returns temperature in millidegC using + * lookup table. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_XOTHERM: Returns XO thermistor voltage in millidegC using + * 100k pullup. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_THERM_100K_PU_PM7: Returns temperature in millidegC using + * lookup table for PMIC7. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade. + * The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade. + * The hardware applies offset/slope to adc code. This is for PMIC7. + * SCALE_HW_CALIB_PM5_CHG_TEMP: Returns result in millidegrees for PMIC5 + * charger temperature. + * SCALE_HW_CALIB_PM5_SMB_TEMP: Returns result in millidegrees for PMIC5 + * SMB1390 temperature. + */ +enum vadc_scale_fn_type { + SCALE_DEFAULT = 0, + SCALE_THERM_100K_PULLUP, + SCALE_PMIC_THERM, + SCALE_XOTHERM, + SCALE_PMI_CHG_TEMP, + SCALE_HW_CALIB_DEFAULT, + SCALE_HW_CALIB_THERM_100K_PULLUP, + SCALE_HW_CALIB_XOTHERM, + SCALE_HW_CALIB_THERM_100K_PU_PM7, + SCALE_HW_CALIB_PMIC_THERM, + SCALE_HW_CALIB_PMIC_THERM_PM7, + SCALE_HW_CALIB_PM5_CHG_TEMP, + SCALE_HW_CALIB_PM5_SMB_TEMP, + SCALE_HW_CALIB_INVALID, +}; + +struct adc5_data { + const u32 full_scale_code_volt; + const u32 full_scale_code_cur; + const struct adc5_channels *adc_chans; + const struct iio_info *info; + unsigned int *decimation; + unsigned int *hw_settle_1; + unsigned int *hw_settle_2; +}; + +int qcom_vadc_scale(enum vadc_scale_fn_type scaletype, + const struct vadc_linear_graph *calib_graph, + const struct u32_fract *prescale, + bool absolute, + u16 adc_code, int *result_mdec); + +struct qcom_adc5_scale_type { + int (*scale_fn)(const struct u32_fract *prescale, + const struct adc5_data *data, u16 adc_code, int *result); +}; + +int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype, + unsigned int prescale_ratio, + const struct adc5_data *data, + u16 adc_code, int *result_mdec); + +u16 qcom_adc_tm5_temp_volt_scale(unsigned int prescale_ratio, + u32 full_scale_code_volt, int temp); + +u16 qcom_adc_tm5_gen2_temp_res_scale(int temp); + +int qcom_adc5_prescaling_from_dt(u32 num, u32 den); + +int qcom_adc5_hw_settle_time_from_dt(u32 value, const unsigned int *hw_settle); + +int qcom_adc5_avg_samples_from_dt(u32 value); + +int qcom_adc5_decimation_from_dt(u32 value, const unsigned int *decimation); + +int qcom_vadc_decimation_from_dt(u32 value); + +#endif /* QCOM_VADC_COMMON_H */ |