1 files changed, 115 insertions, 0 deletions
diff --git a/include/linux/mfd/idt82p33_reg.h b/include/linux/mfd/idt82p33_reg.h
new file mode 100644
index 000000000000..1db532feeb91
--- /dev/null
+++ b/include/linux/mfd/idt82p33_reg.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Register Map - Based on AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#ifndef HAVE_IDT82P33_REG
+#define HAVE_IDT82P33_REG
+
+#define REG_ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
+
+/* Register address */
+#define DPLL1_TOD_CNFG 0x134
+#define DPLL2_TOD_CNFG 0x1B4
+
+#define DPLL1_TOD_STS 0x10B
+#define DPLL2_TOD_STS 0x18B
+
+#define DPLL1_TOD_TRIGGER 0x115
+#define DPLL2_TOD_TRIGGER 0x195
+
+#define DPLL1_OPERATING_MODE_CNFG 0x120
+#define DPLL2_OPERATING_MODE_CNFG 0x1A0
+
+#define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
+#define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
+
+#define DPLL1_PHASE_OFFSET_CNFG 0x143
+#define DPLL2_PHASE_OFFSET_CNFG 0x1C3
+
+#define DPLL1_SYNC_EDGE_CNFG 0x140
+#define DPLL2_SYNC_EDGE_CNFG 0x1C0
+
+#define DPLL1_INPUT_MODE_CNFG 0x116
+#define DPLL2_INPUT_MODE_CNFG 0x196
+
+#define DPLL1_OPERATING_STS 0x102
+#define DPLL2_OPERATING_STS 0x182
+
+#define DPLL1_CURRENT_FREQ_STS 0x103
+#define DPLL2_CURRENT_FREQ_STS 0x183
+
+#define REG_SOFT_RESET 0X381
+
+#define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
+#define TOD_TRIGGER(wr_trig, rd_trig) ((wr_trig & 0xf) << 4 | (rd_trig & 0xf))
+
+/* Register bit definitions */
+#define SYNC_TOD BIT(1)
+#define PH_OFFSET_EN BIT(7)
+#define SQUELCH_ENABLE BIT(5)
+
+/* Bit definitions for the DPLL_MODE register */
+#define PLL_MODE_SHIFT		(0)
+#define PLL_MODE_MASK		(0x1F)
+#define COMBO_MODE_EN		BIT(5)
+#define COMBO_MODE_SHIFT	(6)
+#define COMBO_MODE_MASK		(0x3)
+
+/* Bit definitions for DPLL_OPERATING_STS register */
+#define OPERATING_STS_MASK	(0x7)
+#define OPERATING_STS_SHIFT	(0x0)
+
+/* Bit definitions for DPLL_TOD_TRIGGER register */
+#define READ_TRIGGER_MASK	(0xF)
+#define READ_TRIGGER_SHIFT	(0x0)
+#define WRITE_TRIGGER_MASK	(0xF0)
+#define WRITE_TRIGGER_SHIFT	(0x4)
+
+/* Bit definitions for REG_SOFT_RESET register */
+#define SOFT_RESET_EN		BIT(7)
+
+enum pll_mode {
+	PLL_MODE_MIN = 0,
+	PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
+	PLL_MODE_FORCE_FREERUN = 1,
+	PLL_MODE_FORCE_HOLDOVER = 2,
+	PLL_MODE_FORCE_LOCKED = 4,
+	PLL_MODE_FORCE_PRE_LOCKED2 = 5,
+	PLL_MODE_FORCE_PRE_LOCKED = 6,
+	PLL_MODE_FORCE_LOST_PHASE = 7,
+	PLL_MODE_DCO = 10,
+	PLL_MODE_WPH = 18,
+	PLL_MODE_MAX = PLL_MODE_WPH,
+};
+
+enum hw_tod_trig_sel {
+	HW_TOD_TRIG_SEL_MIN = 0,
+	HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_NO_READ = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_SYNC_SEL = 1,
+	HW_TOD_TRIG_SEL_IN12 = 2,
+	HW_TOD_TRIG_SEL_IN13 = 3,
+	HW_TOD_TRIG_SEL_IN14 = 4,
+	HW_TOD_TRIG_SEL_TOD_PPS = 5,
+	HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
+	HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
+	HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
+	HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
+	HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+};
+
+/** @brief Enumerated type listing DPLL operational modes */
+enum dpll_state {
+	DPLL_STATE_FREERUN = 1,
+	DPLL_STATE_HOLDOVER = 2,
+	DPLL_STATE_LOCKED = 4,
+	DPLL_STATE_PRELOCKED2 = 5,
+	DPLL_STATE_PRELOCKED = 6,
+	DPLL_STATE_LOSTPHASE = 7,
+	DPLL_STATE_MAX
+};
+
+#endif