diff options
Diffstat (limited to 'include/linux/mfd/idt8a340_reg.h')
| -rw-r--r-- | include/linux/mfd/idt8a340_reg.h | 768 |
1 files changed, 768 insertions, 0 deletions
diff --git a/include/linux/mfd/idt8a340_reg.h b/include/linux/mfd/idt8a340_reg.h new file mode 100644 index 000000000000..0c706085c205 --- /dev/null +++ b/include/linux/mfd/idt8a340_reg.h @@ -0,0 +1,768 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Based on 5.2.0, Family Programming Guide (Sept 30, 2020) + * + * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company. + */ +#ifndef HAVE_IDT8A340_REG +#define HAVE_IDT8A340_REG + +#define PAGE_ADDR_BASE 0x0000 +#define PAGE_ADDR 0x00fc + +#define HW_REVISION 0x8180 +#define REV_ID 0x007a + +#define HW_DPLL_0 (0x8a00) +#define HW_DPLL_1 (0x8b00) +#define HW_DPLL_2 (0x8c00) +#define HW_DPLL_3 (0x8d00) +#define HW_DPLL_4 (0x8e00) +#define HW_DPLL_5 (0x8f00) +#define HW_DPLL_6 (0x9000) +#define HW_DPLL_7 (0x9100) + +#define HW_DPLL_TOD_SW_TRIG_ADDR__0 (0x080) +#define HW_DPLL_TOD_CTRL_1 (0x089) +#define HW_DPLL_TOD_CTRL_2 (0x08A) +#define HW_DPLL_TOD_OVR__0 (0x098) +#define HW_DPLL_TOD_OUT_0__0 (0x0B0) + +#define HW_Q0_Q1_CH_SYNC_CTRL_0 (0xa740) +#define HW_Q0_Q1_CH_SYNC_CTRL_1 (0xa741) +#define HW_Q2_Q3_CH_SYNC_CTRL_0 (0xa742) +#define HW_Q2_Q3_CH_SYNC_CTRL_1 (0xa743) +#define HW_Q4_Q5_CH_SYNC_CTRL_0 (0xa744) +#define HW_Q4_Q5_CH_SYNC_CTRL_1 (0xa745) +#define HW_Q6_Q7_CH_SYNC_CTRL_0 (0xa746) +#define HW_Q6_Q7_CH_SYNC_CTRL_1 (0xa747) +#define HW_Q8_CH_SYNC_CTRL_0 (0xa748) +#define HW_Q8_CH_SYNC_CTRL_1 (0xa749) +#define HW_Q9_CH_SYNC_CTRL_0 (0xa74a) +#define HW_Q9_CH_SYNC_CTRL_1 (0xa74b) +#define HW_Q10_CH_SYNC_CTRL_0 (0xa74c) +#define HW_Q10_CH_SYNC_CTRL_1 (0xa74d) +#define HW_Q11_CH_SYNC_CTRL_0 (0xa74e) +#define HW_Q11_CH_SYNC_CTRL_1 (0xa74f) + +#define SYNC_SOURCE_DPLL0_TOD_PPS 0x14 +#define SYNC_SOURCE_DPLL1_TOD_PPS 0x15 +#define SYNC_SOURCE_DPLL2_TOD_PPS 0x16 +#define SYNC_SOURCE_DPLL3_TOD_PPS 0x17 + +#define SYNCTRL1_MASTER_SYNC_RST BIT(7) +#define SYNCTRL1_MASTER_SYNC_TRIG BIT(5) +#define SYNCTRL1_TOD_SYNC_TRIG BIT(4) +#define SYNCTRL1_FBDIV_FRAME_SYNC_TRIG BIT(3) +#define SYNCTRL1_FBDIV_SYNC_TRIG BIT(2) +#define SYNCTRL1_Q1_DIV_SYNC_TRIG BIT(1) +#define SYNCTRL1_Q0_DIV_SYNC_TRIG BIT(0) + +#define HW_Q8_CTRL_SPARE (0xa7d4) +#define HW_Q11_CTRL_SPARE (0xa7ec) + +/** + * Select FOD5 as sync_trigger for Q8 divider. + * Transition from logic zero to one + * sets trigger to sync Q8 divider. + * + * Unused when FOD4 is driving Q8 divider (normal operation). + */ +#define Q9_TO_Q8_SYNC_TRIG BIT(1) + +/** + * Enable FOD5 as driver for clock and sync for Q8 divider. + * Enable fanout buffer for FOD5. + * + * Unused when FOD4 is driving Q8 divider (normal operation). + */ +#define Q9_TO_Q8_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK (BIT(0) | BIT(2)) + +/** + * Select FOD6 as sync_trigger for Q11 divider. + * Transition from logic zero to one + * sets trigger to sync Q11 divider. + * + * Unused when FOD7 is driving Q11 divider (normal operation). + */ +#define Q10_TO_Q11_SYNC_TRIG BIT(1) + +/** + * Enable FOD6 as driver for clock and sync for Q11 divider. + * Enable fanout buffer for FOD6. + * + * Unused when FOD7 is driving Q11 divider (normal operation). + */ +#define Q10_TO_Q11_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK (BIT(0) | BIT(2)) + +#define RESET_CTRL 0xc000 +#define SM_RESET 0x0012 +#define SM_RESET_V520 0x0013 +#define SM_RESET_CMD 0x5A + +#define GENERAL_STATUS 0xc014 +#define BOOT_STATUS 0x0000 +#define HW_REV_ID 0x000A +#define BOND_ID 0x000B +#define HW_CSR_ID 0x000C +#define HW_IRQ_ID 0x000E +#define MAJ_REL 0x0010 +#define MIN_REL 0x0011 +#define HOTFIX_REL 0x0012 +#define PIPELINE_ID 0x0014 +#define BUILD_ID 0x0018 +#define JTAG_DEVICE_ID 0x001c +#define PRODUCT_ID 0x001e +#define OTP_SCSR_CONFIG_SELECT 0x0022 + +#define STATUS 0xc03c +#define DPLL0_STATUS 0x0018 +#define DPLL1_STATUS 0x0019 +#define DPLL2_STATUS 0x001a +#define DPLL3_STATUS 0x001b +#define DPLL4_STATUS 0x001c +#define DPLL5_STATUS 0x001d +#define DPLL6_STATUS 0x001e +#define DPLL7_STATUS 0x001f +#define DPLL_SYS_STATUS 0x0020 +#define DPLL_SYS_APLL_STATUS 0x0021 +#define DPLL0_FILTER_STATUS 0x0044 +#define DPLL1_FILTER_STATUS 0x004c +#define DPLL2_FILTER_STATUS 0x0054 +#define DPLL3_FILTER_STATUS 0x005c +#define DPLL4_FILTER_STATUS 0x0064 +#define DPLL5_FILTER_STATUS 0x006c +#define DPLL6_FILTER_STATUS 0x0074 +#define DPLL7_FILTER_STATUS 0x007c +#define DPLLSYS_FILTER_STATUS 0x0084 +#define USER_GPIO0_TO_7_STATUS 0x008a +#define USER_GPIO8_TO_15_STATUS 0x008b + +#define GPIO_USER_CONTROL 0xc160 +#define GPIO0_TO_7_OUT 0x0000 +#define GPIO8_TO_15_OUT 0x0001 +#define GPIO0_TO_7_OUT_V520 0x0002 +#define GPIO8_TO_15_OUT_V520 0x0003 + +#define STICKY_STATUS_CLEAR 0xc164 + +#define GPIO_TOD_NOTIFICATION_CLEAR 0xc16c + +#define ALERT_CFG 0xc188 + +#define SYS_DPLL_XO 0xc194 + +#define SYS_APLL 0xc19c + +#define INPUT_0 0xc1b0 +#define INPUT_1 0xc1c0 +#define INPUT_2 0xc1d0 +#define INPUT_3 0xc200 +#define INPUT_4 0xc210 +#define INPUT_5 0xc220 +#define INPUT_6 0xc230 +#define INPUT_7 0xc240 +#define INPUT_8 0xc250 +#define INPUT_9 0xc260 +#define INPUT_10 0xc280 +#define INPUT_11 0xc290 +#define INPUT_12 0xc2a0 +#define INPUT_13 0xc2b0 +#define INPUT_14 0xc2c0 +#define INPUT_15 0xc2d0 + +#define REF_MON_0 0xc2e0 +#define REF_MON_1 0xc2ec +#define REF_MON_2 0xc300 +#define REF_MON_3 0xc30c +#define REF_MON_4 0xc318 +#define REF_MON_5 0xc324 +#define REF_MON_6 0xc330 +#define REF_MON_7 0xc33c +#define REF_MON_8 0xc348 +#define REF_MON_9 0xc354 +#define REF_MON_10 0xc360 +#define REF_MON_11 0xc36c +#define REF_MON_12 0xc380 +#define REF_MON_13 0xc38c +#define REF_MON_14 0xc398 +#define REF_MON_15 0xc3a4 + +#define DPLL_0 0xc3b0 +#define DPLL_CTRL_REG_0 0x0002 +#define DPLL_CTRL_REG_1 0x0003 +#define DPLL_CTRL_REG_2 0x0004 +#define DPLL_TOD_SYNC_CFG 0x0031 +#define DPLL_COMBO_SLAVE_CFG_0 0x0032 +#define DPLL_COMBO_SLAVE_CFG_1 0x0033 +#define DPLL_SLAVE_REF_CFG 0x0034 +#define DPLL_REF_MODE 0x0035 +#define DPLL_PHASE_MEASUREMENT_CFG 0x0036 +#define DPLL_MODE 0x0037 +#define DPLL_MODE_V520 0x003B +#define DPLL_1 0xc400 +#define DPLL_2 0xc438 +#define DPLL_2_V520 0xc43c +#define DPLL_3 0xc480 +#define DPLL_4 0xc4b8 +#define DPLL_4_V520 0xc4bc +#define DPLL_5 0xc500 +#define DPLL_6 0xc538 +#define DPLL_6_V520 0xc53c +#define DPLL_7 0xc580 +#define SYS_DPLL 0xc5b8 +#define SYS_DPLL_V520 0xc5bc + +#define DPLL_CTRL_0 0xc600 +#define DPLL_CTRL_DPLL_MANU_REF_CFG 0x0001 +#define DPLL_CTRL_DPLL_FOD_FREQ 0x001c +#define DPLL_CTRL_COMBO_MASTER_CFG 0x003a +#define DPLL_CTRL_1 0xc63c +#define DPLL_CTRL_2 0xc680 +#define DPLL_CTRL_3 0xc6bc +#define DPLL_CTRL_4 0xc700 +#define DPLL_CTRL_5 0xc73c +#define DPLL_CTRL_6 0xc780 +#define DPLL_CTRL_7 0xc7bc +#define SYS_DPLL_CTRL 0xc800 + +#define DPLL_PHASE_0 0xc818 +/* Signed 42-bit FFO in units of 2^(-53) */ +#define DPLL_WR_PHASE 0x0000 +#define DPLL_PHASE_1 0xc81c +#define DPLL_PHASE_2 0xc820 +#define DPLL_PHASE_3 0xc824 +#define DPLL_PHASE_4 0xc828 +#define DPLL_PHASE_5 0xc82c +#define DPLL_PHASE_6 0xc830 +#define DPLL_PHASE_7 0xc834 + +#define DPLL_FREQ_0 0xc838 +/* Signed 42-bit FFO in units of 2^(-53) */ +#define DPLL_WR_FREQ 0x0000 +#define DPLL_FREQ_1 0xc840 +#define DPLL_FREQ_2 0xc848 +#define DPLL_FREQ_3 0xc850 +#define DPLL_FREQ_4 0xc858 +#define DPLL_FREQ_5 0xc860 +#define DPLL_FREQ_6 0xc868 +#define DPLL_FREQ_7 0xc870 + +#define DPLL_PHASE_PULL_IN_0 0xc880 +#define PULL_IN_OFFSET 0x0000 /* Signed 32 bit */ +#define PULL_IN_SLOPE_LIMIT 0x0004 /* Unsigned 24 bit */ +#define PULL_IN_CTRL 0x0007 +#define DPLL_PHASE_PULL_IN_1 0xc888 +#define DPLL_PHASE_PULL_IN_2 0xc890 +#define DPLL_PHASE_PULL_IN_3 0xc898 +#define DPLL_PHASE_PULL_IN_4 0xc8a0 +#define DPLL_PHASE_PULL_IN_5 0xc8a8 +#define DPLL_PHASE_PULL_IN_6 0xc8b0 +#define DPLL_PHASE_PULL_IN_7 0xc8b8 + +#define GPIO_CFG 0xc8c0 +#define GPIO_CFG_GBL 0x0000 +#define GPIO_0 0xc8c2 +#define GPIO_DCO_INC_DEC 0x0000 +#define GPIO_OUT_CTRL_0 0x0001 +#define GPIO_OUT_CTRL_1 0x0002 +#define GPIO_TOD_TRIG 0x0003 +#define GPIO_DPLL_INDICATOR 0x0004 +#define GPIO_LOS_INDICATOR 0x0005 +#define GPIO_REF_INPUT_DSQ_0 0x0006 +#define GPIO_REF_INPUT_DSQ_1 0x0007 +#define GPIO_REF_INPUT_DSQ_2 0x0008 +#define GPIO_REF_INPUT_DSQ_3 0x0009 +#define GPIO_MAN_CLK_SEL_0 0x000a +#define GPIO_MAN_CLK_SEL_1 0x000b +#define GPIO_MAN_CLK_SEL_2 0x000c +#define GPIO_SLAVE 0x000d +#define GPIO_ALERT_OUT_CFG 0x000e +#define GPIO_TOD_NOTIFICATION_CFG 0x000f +#define GPIO_CTRL 0x0010 +#define GPIO_CTRL_V520 0x0011 +#define GPIO_1 0xc8d4 +#define GPIO_2 0xc8e6 +#define GPIO_3 0xc900 +#define GPIO_4 0xc912 +#define GPIO_5 0xc924 +#define GPIO_6 0xc936 +#define GPIO_7 0xc948 +#define GPIO_8 0xc95a +#define GPIO_9 0xc980 +#define GPIO_10 0xc992 +#define GPIO_11 0xc9a4 +#define GPIO_12 0xc9b6 +#define GPIO_13 0xc9c8 +#define GPIO_14 0xc9da +#define GPIO_15 0xca00 + +#define OUT_DIV_MUX 0xca12 +#define OUTPUT_0 0xca14 +#define OUTPUT_0_V520 0xca20 +/* FOD frequency output divider value */ +#define OUT_DIV 0x0000 +#define OUT_DUTY_CYCLE_HIGH 0x0004 +#define OUT_CTRL_0 0x0008 +#define OUT_CTRL_1 0x0009 +/* Phase adjustment in FOD cycles */ +#define OUT_PHASE_ADJ 0x000c +#define OUTPUT_1 0xca24 +#define OUTPUT_1_V520 0xca30 +#define OUTPUT_2 0xca34 +#define OUTPUT_2_V520 0xca40 +#define OUTPUT_3 0xca44 +#define OUTPUT_3_V520 0xca50 +#define OUTPUT_4 0xca54 +#define OUTPUT_4_V520 0xca60 +#define OUTPUT_5 0xca64 +#define OUTPUT_5_V520 0xca80 +#define OUTPUT_6 0xca80 +#define OUTPUT_6_V520 0xca90 +#define OUTPUT_7 0xca90 +#define OUTPUT_7_V520 0xcaa0 +#define OUTPUT_8 0xcaa0 +#define OUTPUT_8_V520 0xcab0 +#define OUTPUT_9 0xcab0 +#define OUTPUT_9_V520 0xcac0 +#define OUTPUT_10 0xcac0 +#define OUTPUT_10_V520 0xcad0 +#define OUTPUT_11 0xcad0 +#define OUTPUT_11_V520 0xcae0 + +#define SERIAL 0xcae0 +#define SERIAL_V520 0xcaf0 + +#define PWM_ENCODER_0 0xcb00 +#define PWM_ENCODER_1 0xcb08 +#define PWM_ENCODER_2 0xcb10 +#define PWM_ENCODER_3 0xcb18 +#define PWM_ENCODER_4 0xcb20 +#define PWM_ENCODER_5 0xcb28 +#define PWM_ENCODER_6 0xcb30 +#define PWM_ENCODER_7 0xcb38 +#define PWM_DECODER_0 0xcb40 +#define PWM_DECODER_1 0xcb48 +#define PWM_DECODER_1_V520 0xcb4a +#define PWM_DECODER_2 0xcb50 +#define PWM_DECODER_2_V520 0xcb54 +#define PWM_DECODER_3 0xcb58 +#define PWM_DECODER_3_V520 0xcb5e +#define PWM_DECODER_4 0xcb60 +#define PWM_DECODER_4_V520 0xcb68 +#define PWM_DECODER_5 0xcb68 +#define PWM_DECODER_5_V520 0xcb80 +#define PWM_DECODER_6 0xcb70 +#define PWM_DECODER_6_V520 0xcb8a +#define PWM_DECODER_7 0xcb80 +#define PWM_DECODER_7_V520 0xcb94 +#define PWM_DECODER_8 0xcb88 +#define PWM_DECODER_8_V520 0xcb9e +#define PWM_DECODER_9 0xcb90 +#define PWM_DECODER_9_V520 0xcba8 +#define PWM_DECODER_10 0xcb98 +#define PWM_DECODER_10_V520 0xcbb2 +#define PWM_DECODER_11 0xcba0 +#define PWM_DECODER_11_V520 0xcbbc +#define PWM_DECODER_12 0xcba8 +#define PWM_DECODER_12_V520 0xcbc6 +#define PWM_DECODER_13 0xcbb0 +#define PWM_DECODER_13_V520 0xcbd0 +#define PWM_DECODER_14 0xcbb8 +#define PWM_DECODER_14_V520 0xcbda +#define PWM_DECODER_15 0xcbc0 +#define PWM_DECODER_15_V520 0xcbe4 +#define PWM_USER_DATA 0xcbc8 +#define PWM_USER_DATA_V520 0xcbf0 + +#define TOD_0 0xcbcc +#define TOD_0_V520 0xcc00 +/* Enable TOD counter, output channel sync and even-PPS mode */ +#define TOD_CFG 0x0000 +#define TOD_CFG_V520 0x0001 +#define TOD_1 0xcbce +#define TOD_1_V520 0xcc02 +#define TOD_2 0xcbd0 +#define TOD_2_V520 0xcc04 +#define TOD_3 0xcbd2 +#define TOD_3_V520 0xcc06 + +#define TOD_WRITE_0 0xcc00 +#define TOD_WRITE_0_V520 0xcc10 +/* 8-bit subns, 32-bit ns, 48-bit seconds */ +#define TOD_WRITE 0x0000 +/* Counter increments after TOD write is completed */ +#define TOD_WRITE_COUNTER 0x000c +/* TOD write trigger configuration */ +#define TOD_WRITE_SELECT_CFG_0 0x000d +/* TOD write trigger selection */ +#define TOD_WRITE_CMD 0x000f +#define TOD_WRITE_1 0xcc10 +#define TOD_WRITE_1_V520 0xcc20 +#define TOD_WRITE_2 0xcc20 +#define TOD_WRITE_2_V520 0xcc30 +#define TOD_WRITE_3 0xcc30 +#define TOD_WRITE_3_V520 0xcc40 + +#define TOD_READ_PRIMARY_0 0xcc40 +#define TOD_READ_PRIMARY_0_V520 0xcc50 +/* 8-bit subns, 32-bit ns, 48-bit seconds */ +#define TOD_READ_PRIMARY_BASE 0x0000 +/* Counter increments after TOD write is completed */ +#define TOD_READ_PRIMARY_COUNTER 0x000b +/* Read trigger configuration */ +#define TOD_READ_PRIMARY_SEL_CFG_0 0x000c +/* Read trigger selection */ +#define TOD_READ_PRIMARY_CMD 0x000e +#define TOD_READ_PRIMARY_CMD_V520 0x000f +#define TOD_READ_PRIMARY_1 0xcc50 +#define TOD_READ_PRIMARY_1_V520 0xcc60 +#define TOD_READ_PRIMARY_2 0xcc60 +#define TOD_READ_PRIMARY_2_V520 0xcc80 +#define TOD_READ_PRIMARY_3 0xcc80 +#define TOD_READ_PRIMARY_3_V520 0xcc90 + +#define TOD_READ_SECONDARY_0 0xcc90 +#define TOD_READ_SECONDARY_0_V520 0xcca0 +/* 8-bit subns, 32-bit ns, 48-bit seconds */ +#define TOD_READ_SECONDARY_BASE 0x0000 +/* Counter increments after TOD write is completed */ +#define TOD_READ_SECONDARY_COUNTER 0x000b +/* Read trigger configuration */ +#define TOD_READ_SECONDARY_SEL_CFG_0 0x000c +/* Read trigger selection */ +#define TOD_READ_SECONDARY_CMD 0x000e +#define TOD_READ_SECONDARY_CMD_V520 0x000f + +#define TOD_READ_SECONDARY_1 0xcca0 +#define TOD_READ_SECONDARY_1_V520 0xccb0 +#define TOD_READ_SECONDARY_2 0xccb0 +#define TOD_READ_SECONDARY_2_V520 0xccc0 +#define TOD_READ_SECONDARY_3 0xccc0 +#define TOD_READ_SECONDARY_3_V520 0xccd0 + +#define OUTPUT_TDC_CFG 0xccd0 +#define OUTPUT_TDC_CFG_V520 0xcce0 +#define OUTPUT_TDC_0 0xcd00 +#define OUTPUT_TDC_1 0xcd08 +#define OUTPUT_TDC_2 0xcd10 +#define OUTPUT_TDC_3 0xcd18 +#define INPUT_TDC 0xcd20 + +#define SCRATCH 0xcf50 +#define SCRATCH_V520 0xcf4c + +#define EEPROM 0xcf68 +#define EEPROM_V520 0xcf64 + +#define OTP 0xcf70 + +#define BYTE 0xcf80 + +/* Bit definitions for the MAJ_REL register */ +#define MAJOR_SHIFT (1) +#define MAJOR_MASK (0x7f) +#define PR_BUILD BIT(0) + +/* Bit definitions for the USER_GPIO0_TO_7_STATUS register */ +#define GPIO0_LEVEL BIT(0) +#define GPIO1_LEVEL BIT(1) +#define GPIO2_LEVEL BIT(2) +#define GPIO3_LEVEL BIT(3) +#define GPIO4_LEVEL BIT(4) +#define GPIO5_LEVEL BIT(5) +#define GPIO6_LEVEL BIT(6) +#define GPIO7_LEVEL BIT(7) + +/* Bit definitions for the USER_GPIO8_TO_15_STATUS register */ +#define GPIO8_LEVEL BIT(0) +#define GPIO9_LEVEL BIT(1) +#define GPIO10_LEVEL BIT(2) +#define GPIO11_LEVEL BIT(3) +#define GPIO12_LEVEL BIT(4) +#define GPIO13_LEVEL BIT(5) +#define GPIO14_LEVEL BIT(6) +#define GPIO15_LEVEL BIT(7) + +/* Bit definitions for the GPIO0_TO_7_OUT register */ +#define GPIO0_DRIVE_LEVEL BIT(0) +#define GPIO1_DRIVE_LEVEL BIT(1) +#define GPIO2_DRIVE_LEVEL BIT(2) +#define GPIO3_DRIVE_LEVEL BIT(3) +#define GPIO4_DRIVE_LEVEL BIT(4) +#define GPIO5_DRIVE_LEVEL BIT(5) +#define GPIO6_DRIVE_LEVEL BIT(6) +#define GPIO7_DRIVE_LEVEL BIT(7) + +/* Bit definitions for the GPIO8_TO_15_OUT register */ +#define GPIO8_DRIVE_LEVEL BIT(0) +#define GPIO9_DRIVE_LEVEL BIT(1) +#define GPIO10_DRIVE_LEVEL BIT(2) +#define GPIO11_DRIVE_LEVEL BIT(3) +#define GPIO12_DRIVE_LEVEL BIT(4) +#define GPIO13_DRIVE_LEVEL BIT(5) +#define GPIO14_DRIVE_LEVEL BIT(6) +#define GPIO15_DRIVE_LEVEL BIT(7) + +/* Bit definitions for the DPLL_TOD_SYNC_CFG register */ +#define TOD_SYNC_SOURCE_SHIFT (1) +#define TOD_SYNC_SOURCE_MASK (0x3) +#define TOD_SYNC_EN BIT(0) + +/* Bit definitions for the DPLL_MODE register */ +#define WRITE_TIMER_MODE BIT(6) +#define PLL_MODE_SHIFT (3) +#define PLL_MODE_MASK (0x7) +#define STATE_MODE_SHIFT (0) +#define STATE_MODE_MASK (0x7) + +/* Bit definitions for the DPLL_MANU_REF_CFG register */ +#define MANUAL_REFERENCE_SHIFT (0) +#define MANUAL_REFERENCE_MASK (0x1f) + +/* Bit definitions for the GPIO_CFG_GBL register */ +#define SUPPLY_MODE_SHIFT (0) +#define SUPPLY_MODE_MASK (0x3) + +/* Bit definitions for the GPIO_DCO_INC_DEC register */ +#define INCDEC_DPLL_INDEX_SHIFT (0) +#define INCDEC_DPLL_INDEX_MASK (0x7) + +/* Bit definitions for the GPIO_OUT_CTRL_0 register */ +#define CTRL_OUT_0 BIT(0) +#define CTRL_OUT_1 BIT(1) +#define CTRL_OUT_2 BIT(2) +#define CTRL_OUT_3 BIT(3) +#define CTRL_OUT_4 BIT(4) +#define CTRL_OUT_5 BIT(5) +#define CTRL_OUT_6 BIT(6) +#define CTRL_OUT_7 BIT(7) + +/* Bit definitions for the GPIO_OUT_CTRL_1 register */ +#define CTRL_OUT_8 BIT(0) +#define CTRL_OUT_9 BIT(1) +#define CTRL_OUT_10 BIT(2) +#define CTRL_OUT_11 BIT(3) +#define CTRL_OUT_12 BIT(4) +#define CTRL_OUT_13 BIT(5) +#define CTRL_OUT_14 BIT(6) +#define CTRL_OUT_15 BIT(7) + +/* Bit definitions for the GPIO_TOD_TRIG register */ +#define TOD_TRIG_0 BIT(0) +#define TOD_TRIG_1 BIT(1) +#define TOD_TRIG_2 BIT(2) +#define TOD_TRIG_3 BIT(3) + +/* Bit definitions for the GPIO_DPLL_INDICATOR register */ +#define IND_DPLL_INDEX_SHIFT (0) +#define IND_DPLL_INDEX_MASK (0x7) + +/* Bit definitions for the GPIO_LOS_INDICATOR register */ +#define REFMON_INDEX_SHIFT (0) +#define REFMON_INDEX_MASK (0xf) +/* Active level of LOS indicator, 0=low 1=high */ +#define ACTIVE_LEVEL BIT(4) + +/* Bit definitions for the GPIO_REF_INPUT_DSQ_0 register */ +#define DSQ_INP_0 BIT(0) +#define DSQ_INP_1 BIT(1) +#define DSQ_INP_2 BIT(2) +#define DSQ_INP_3 BIT(3) +#define DSQ_INP_4 BIT(4) +#define DSQ_INP_5 BIT(5) +#define DSQ_INP_6 BIT(6) +#define DSQ_INP_7 BIT(7) + +/* Bit definitions for the GPIO_REF_INPUT_DSQ_1 register */ +#define DSQ_INP_8 BIT(0) +#define DSQ_INP_9 BIT(1) +#define DSQ_INP_10 BIT(2) +#define DSQ_INP_11 BIT(3) +#define DSQ_INP_12 BIT(4) +#define DSQ_INP_13 BIT(5) +#define DSQ_INP_14 BIT(6) +#define DSQ_INP_15 BIT(7) + +/* Bit definitions for the GPIO_REF_INPUT_DSQ_2 register */ +#define DSQ_DPLL_0 BIT(0) +#define DSQ_DPLL_1 BIT(1) +#define DSQ_DPLL_2 BIT(2) +#define DSQ_DPLL_3 BIT(3) +#define DSQ_DPLL_4 BIT(4) +#define DSQ_DPLL_5 BIT(5) +#define DSQ_DPLL_6 BIT(6) +#define DSQ_DPLL_7 BIT(7) + +/* Bit definitions for the GPIO_REF_INPUT_DSQ_3 register */ +#define DSQ_DPLL_SYS BIT(0) +#define GPIO_DSQ_LEVEL BIT(1) + +/* Bit definitions for the GPIO_TOD_NOTIFICATION_CFG register */ +#define DPLL_TOD_SHIFT (0) +#define DPLL_TOD_MASK (0x3) +#define TOD_READ_SECONDARY BIT(2) +#define GPIO_ASSERT_LEVEL BIT(3) + +/* Bit definitions for the GPIO_CTRL register */ +#define GPIO_FUNCTION_EN BIT(0) +#define GPIO_CMOS_OD_MODE BIT(1) +#define GPIO_CONTROL_DIR BIT(2) +#define GPIO_PU_PD_MODE BIT(3) +#define GPIO_FUNCTION_SHIFT (4) +#define GPIO_FUNCTION_MASK (0xf) + +/* Bit definitions for the OUT_CTRL_1 register */ +#define OUT_SYNC_DISABLE BIT(7) +#define SQUELCH_VALUE BIT(6) +#define SQUELCH_DISABLE BIT(5) +#define PAD_VDDO_SHIFT (2) +#define PAD_VDDO_MASK (0x7) +#define PAD_CMOSDRV_SHIFT (0) +#define PAD_CMOSDRV_MASK (0x3) + +/* Bit definitions for the TOD_CFG register */ +#define TOD_EVEN_PPS_MODE BIT(2) +#define TOD_OUT_SYNC_ENABLE BIT(1) +#define TOD_ENABLE BIT(0) + +/* Bit definitions for the TOD_WRITE_SELECT_CFG_0 register */ +#define WR_PWM_DECODER_INDEX_SHIFT (4) +#define WR_PWM_DECODER_INDEX_MASK (0xf) +#define WR_REF_INDEX_SHIFT (0) +#define WR_REF_INDEX_MASK (0xf) + +/* Bit definitions for the TOD_WRITE_CMD register */ +#define TOD_WRITE_SELECTION_SHIFT (0) +#define TOD_WRITE_SELECTION_MASK (0xf) +/* 4.8.7 */ +#define TOD_WRITE_TYPE_SHIFT (4) +#define TOD_WRITE_TYPE_MASK (0x3) + +/* Bit definitions for the TOD_READ_PRIMARY_SEL_CFG_0 register */ +#define RD_PWM_DECODER_INDEX_SHIFT (4) +#define RD_PWM_DECODER_INDEX_MASK (0xf) +#define RD_REF_INDEX_SHIFT (0) +#define RD_REF_INDEX_MASK (0xf) + +/* Bit definitions for the TOD_READ_PRIMARY_CMD register */ +#define TOD_READ_TRIGGER_MODE BIT(4) +#define TOD_READ_TRIGGER_SHIFT (0) +#define TOD_READ_TRIGGER_MASK (0xf) + +/* Bit definitions for the DPLL_CTRL_COMBO_MASTER_CFG register */ +#define COMBO_MASTER_HOLD BIT(0) + +/* Bit definitions for DPLL_SYS_STATUS register */ +#define DPLL_SYS_STATE_MASK (0xf) + +/* Bit definitions for SYS_APLL_STATUS register */ +#define SYS_APLL_LOSS_LOCK_LIVE_MASK BIT(0) +#define SYS_APLL_LOSS_LOCK_LIVE_LOCKED 0 +#define SYS_APLL_LOSS_LOCK_LIVE_UNLOCKED 1 + +/* Bit definitions for the DPLL0_STATUS register */ +#define DPLL_STATE_MASK (0xf) +#define DPLL_STATE_SHIFT (0x0) + +/* Values of DPLL_N.DPLL_MODE.PLL_MODE */ +enum pll_mode { + PLL_MODE_MIN = 0, + PLL_MODE_PLL = PLL_MODE_MIN, + PLL_MODE_WRITE_PHASE = 1, + PLL_MODE_WRITE_FREQUENCY = 2, + PLL_MODE_GPIO_INC_DEC = 3, + PLL_MODE_SYNTHESIS = 4, + PLL_MODE_PHASE_MEASUREMENT = 5, + PLL_MODE_DISABLED = 6, + PLL_MODE_MAX = PLL_MODE_DISABLED, +}; + +/* Values of DPLL_CTRL_n.DPLL_MANU_REF_CFG.MANUAL_REFERENCE */ +enum manual_reference { + MANU_REF_MIN = 0, + MANU_REF_CLK0 = MANU_REF_MIN, + MANU_REF_CLK1, + MANU_REF_CLK2, + MANU_REF_CLK3, + MANU_REF_CLK4, + MANU_REF_CLK5, + MANU_REF_CLK6, + MANU_REF_CLK7, + MANU_REF_CLK8, + MANU_REF_CLK9, + MANU_REF_CLK10, + MANU_REF_CLK11, + MANU_REF_CLK12, + MANU_REF_CLK13, + MANU_REF_CLK14, + MANU_REF_CLK15, + MANU_REF_WRITE_PHASE, + MANU_REF_WRITE_FREQUENCY, + MANU_REF_XO_DPLL, + MANU_REF_MAX = MANU_REF_XO_DPLL, +}; + +enum hw_tod_write_trig_sel { + HW_TOD_WR_TRIG_SEL_MIN = 0, + HW_TOD_WR_TRIG_SEL_MSB = HW_TOD_WR_TRIG_SEL_MIN, + HW_TOD_WR_TRIG_SEL_RESERVED = 1, + HW_TOD_WR_TRIG_SEL_TOD_PPS = 2, + HW_TOD_WR_TRIG_SEL_IRIGB_PPS = 3, + HW_TOD_WR_TRIG_SEL_PWM_PPS = 4, + HW_TOD_WR_TRIG_SEL_GPIO = 5, + HW_TOD_WR_TRIG_SEL_FOD_SYNC = 6, + WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_FOD_SYNC, +}; + +enum scsr_read_trig_sel { + /* CANCEL CURRENT TOD READ; MODULE BECOMES IDLE - NO TRIGGER OCCURS */ + SCSR_TOD_READ_TRIG_SEL_DISABLE = 0, + /* TRIGGER IMMEDIATELY */ + SCSR_TOD_READ_TRIG_SEL_IMMEDIATE = 1, + /* TRIGGER ON RISING EDGE OF INTERNAL TOD PPS SIGNAL */ + SCSR_TOD_READ_TRIG_SEL_TODPPS = 2, + /* TRGGER ON RISING EDGE OF SELECTED REFERENCE INPUT */ + SCSR_TOD_READ_TRIG_SEL_REFCLK = 3, + /* TRIGGER ON RISING EDGE OF SELECTED PWM DECODER 1PPS OUTPUT */ + SCSR_TOD_READ_TRIG_SEL_PWMPPS = 4, + SCSR_TOD_READ_TRIG_SEL_RESERVED = 5, + /* TRIGGER WHEN WRITE FREQUENCY EVENT OCCURS */ + SCSR_TOD_READ_TRIG_SEL_WRITEFREQUENCYEVENT = 6, + /* TRIGGER ON SELECTED GPIO */ + SCSR_TOD_READ_TRIG_SEL_GPIO = 7, + SCSR_TOD_READ_TRIG_SEL_MAX = SCSR_TOD_READ_TRIG_SEL_GPIO, +}; + +/* Values STATUS.DPLL_SYS_STATUS.DPLL_SYS_STATE */ +enum dpll_state { + DPLL_STATE_MIN = 0, + DPLL_STATE_FREERUN = DPLL_STATE_MIN, + DPLL_STATE_LOCKACQ = 1, + DPLL_STATE_LOCKREC = 2, + DPLL_STATE_LOCKED = 3, + DPLL_STATE_HOLDOVER = 4, + DPLL_STATE_OPEN_LOOP = 5, + DPLL_STATE_MAX = DPLL_STATE_OPEN_LOOP, +}; + +/* 4.8.7 only */ +enum scsr_tod_write_trig_sel { + SCSR_TOD_WR_TRIG_SEL_DISABLE = 0, + SCSR_TOD_WR_TRIG_SEL_IMMEDIATE = 1, + SCSR_TOD_WR_TRIG_SEL_REFCLK = 2, + SCSR_TOD_WR_TRIG_SEL_PWMPPS = 3, + SCSR_TOD_WR_TRIG_SEL_TODPPS = 4, + SCSR_TOD_WR_TRIG_SEL_SYNCFOD = 5, + SCSR_TOD_WR_TRIG_SEL_GPIO = 6, + SCSR_TOD_WR_TRIG_SEL_MAX = SCSR_TOD_WR_TRIG_SEL_GPIO, +}; + +/* 4.8.7 only */ +enum scsr_tod_write_type_sel { + SCSR_TOD_WR_TYPE_SEL_ABSOLUTE = 0, + SCSR_TOD_WR_TYPE_SEL_DELTA_PLUS = 1, + SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS = 2, + SCSR_TOD_WR_TYPE_SEL_MAX = SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS, +}; +#endif |