diff options
Diffstat (limited to 'include/linux/micrel_phy.h')
| -rw-r--r-- | include/linux/micrel_phy.h | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 75f880c25bb8..1f7c33b2f5a3 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -27,6 +27,8 @@ #define PHY_ID_KSZ8061 0x00221570 #define PHY_ID_KSZ9031 0x00221620 #define PHY_ID_KSZ9131 0x00221640 +#define PHY_ID_LAN8814 0x00221660 +#define PHY_ID_LAN8804 0x00221670 #define PHY_ID_KSZ886X 0x00221430 #define PHY_ID_KSZ8863 0x00221435 @@ -38,10 +40,26 @@ /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 #define MICREL_PHY_FXEN 0x00000002 +#define MICREL_KSZ8_P1_ERRATA 0x00000003 #define MICREL_KSZ9021_EXTREG_CTRL 0xB #define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC #define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW 0x104 #define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW 0x105 +/* Device specific MII_BMCR (Reg 0) bits */ +/* 1 = HP Auto MDI/MDI-X mode, 0 = Microchip Auto MDI/MDI-X mode */ +#define KSZ886X_BMCR_HP_MDIX BIT(5) +/* 1 = Force MDI (transmit on RXP/RXM pins), 0 = Normal operation + * (transmit on TXP/TXM pins) + */ +#define KSZ886X_BMCR_FORCE_MDI BIT(4) +/* 1 = Disable auto MDI-X */ +#define KSZ886X_BMCR_DISABLE_AUTO_MDIX BIT(3) +#define KSZ886X_BMCR_DISABLE_FAR_END_FAULT BIT(2) +#define KSZ886X_BMCR_DISABLE_TRANSMIT BIT(1) +#define KSZ886X_BMCR_DISABLE_LED BIT(0) + +#define KSZ886X_CTRL_MDIX_STAT BIT(4) + #endif /* _MICREL_PHY_H */ |