diff options
Diffstat (limited to 'include/linux/mtd/spi-nor.h')
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 393 |
1 files changed, 82 insertions, 311 deletions
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 5abd91cc6dfa..42218a1164f6 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -12,23 +12,6 @@ #include <linux/spi/spi-mem.h> /* - * Manufacturer IDs - * - * The first byte returned from the flash after sending opcode SPINOR_OP_RDID. - * Sometimes these are the same as CFI IDs, but sometimes they aren't. - */ -#define SNOR_MFR_ATMEL CFI_MFR_ATMEL -#define SNOR_MFR_GIGADEVICE 0xc8 -#define SNOR_MFR_INTEL CFI_MFR_INTEL -#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */ -#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */ -#define SNOR_MFR_ISSI CFI_MFR_PMC -#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX -#define SNOR_MFR_SPANSION CFI_MFR_AMD -#define SNOR_MFR_SST CFI_MFR_SST -#define SNOR_MFR_WINBOND 0xef /* Also used by some Spansion */ - -/* * Note on opcode nomenclature: some opcodes have a format like * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number * of I/O lines used for the opcode, address, and data (respectively). The @@ -37,6 +20,7 @@ */ /* Flash opcodes. */ +#define SPINOR_OP_WRDI 0x04 /* Write disable */ #define SPINOR_OP_WREN 0x06 /* Write enable */ #define SPINOR_OP_RDSR 0x05 /* Read status register */ #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ @@ -63,10 +47,9 @@ #define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */ #define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */ #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ -#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ -#define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ -#define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */ -#define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */ +#define SPINOR_OP_SRSTEN 0x66 /* Software Reset Enable */ +#define SPINOR_OP_SRST 0x99 /* Software Reset */ +#define SPINOR_OP_GBULK 0x98 /* Global Block Unlock */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ #define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ @@ -97,30 +80,24 @@ /* Used for SST flashes only. */ #define SPINOR_OP_BP 0x02 /* Byte program */ -#define SPINOR_OP_WRDI 0x04 /* Write disable */ #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */ -/* Used for S3AN flashes only */ -#define SPINOR_OP_XSE 0x50 /* Sector erase */ -#define SPINOR_OP_XPP 0x82 /* Page program */ -#define SPINOR_OP_XRDSR 0xd7 /* Read status register */ - -#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */ -#define XSR_RDY BIT(7) /* Ready */ - - /* Used for Macronix and Winbond flashes. */ #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */ #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */ /* Used for Spansion flashes only. */ #define SPINOR_OP_BRWR 0x17 /* Bank register write */ -#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ /* Used for Micron flashes only. */ #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ #define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ +/* Used for GigaDevices and Winbond flashes. */ +#define SPINOR_OP_ESECR 0x44 /* Erase Security registers */ +#define SPINOR_OP_PSECR 0x42 /* Program Security registers */ +#define SPINOR_OP_RSECR 0x48 /* Read Security registers */ + /* Status Register bits. */ #define SR_WIP BIT(0) /* Write in progress */ #define SR_WEL BIT(1) /* Write enable latch */ @@ -128,7 +105,9 @@ #define SR_BP0 BIT(2) /* Block protect 0 */ #define SR_BP1 BIT(3) /* Block protect 1 */ #define SR_BP2 BIT(4) /* Block protect 2 */ +#define SR_BP3 BIT(5) /* Block protect 3 */ #define SR_TB_BIT5 BIT(5) /* Top/Bottom protect */ +#define SR_BP3_BIT6 BIT(6) /* Block protect 3 */ #define SR_TB_BIT6 BIT(6) /* Top/Bottom protect */ #define SR_SRWD BIT(7) /* SR write protect */ /* Spansion/Cypress specific status bits */ @@ -137,17 +116,16 @@ #define SR1_QUAD_EN_BIT6 BIT(6) +#define SR_BP_SHIFT 2 + /* Enhanced Volatile Configuration Register bits */ #define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */ -/* Flag Status Register bits */ -#define FSR_READY BIT(7) /* Device status, 0 = Busy, 1 = Ready */ -#define FSR_E_ERR BIT(5) /* Erase operation status */ -#define FSR_P_ERR BIT(4) /* Program operation status */ -#define FSR_PT_ERR BIT(1) /* Protection error bit */ - /* Status Register 2 bits. */ #define SR2_QUAD_EN_BIT1 BIT(1) +#define SR2_LB1 BIT(3) /* Security Register Lock Bit 1 */ +#define SR2_LB2 BIT(4) /* Security Register Lock Bit 2 */ +#define SR2_LB3 BIT(5) /* Security Register Lock Bit 3 */ #define SR2_QUAD_EN_BIT7 BIT(7) /* Supported SPI protocols */ @@ -195,6 +173,7 @@ enum spi_nor_protocol { SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2), SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4), SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8), + SNOR_PROTO_8_8_8_DTR = SNOR_PROTO_DTR(8, 8, 8), }; static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto) @@ -225,110 +204,6 @@ static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto) return spi_nor_get_protocol_data_nbits(proto); } -enum spi_nor_option_flags { - SNOR_F_USE_FSR = BIT(0), - SNOR_F_HAS_SR_TB = BIT(1), - SNOR_F_NO_OP_CHIP_ERASE = BIT(2), - SNOR_F_READY_XSR_RDY = BIT(3), - SNOR_F_USE_CLSR = BIT(4), - SNOR_F_BROKEN_RESET = BIT(5), - SNOR_F_4B_OPCODES = BIT(6), - SNOR_F_HAS_4BAIT = BIT(7), - SNOR_F_HAS_LOCK = BIT(8), - SNOR_F_HAS_16BIT_SR = BIT(9), - SNOR_F_NO_READ_CR = BIT(10), - SNOR_F_HAS_SR_TB_BIT6 = BIT(11), - -}; - -/** - * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type - * @size: the size of the sector/block erased by the erase type. - * JEDEC JESD216B imposes erase sizes to be a power of 2. - * @size_shift: @size is a power of 2, the shift is stored in - * @size_shift. - * @size_mask: the size mask based on @size_shift. - * @opcode: the SPI command op code to erase the sector/block. - * @idx: Erase Type index as sorted in the Basic Flash Parameter - * Table. It will be used to synchronize the supported - * Erase Types with the ones identified in the SFDP - * optional tables. - */ -struct spi_nor_erase_type { - u32 size; - u32 size_shift; - u32 size_mask; - u8 opcode; - u8 idx; -}; - -/** - * struct spi_nor_erase_command - Used for non-uniform erases - * The structure is used to describe a list of erase commands to be executed - * once we validate that the erase can be performed. The elements in the list - * are run-length encoded. - * @list: for inclusion into the list of erase commands. - * @count: how many times the same erase command should be - * consecutively used. - * @size: the size of the sector/block erased by the command. - * @opcode: the SPI command op code to erase the sector/block. - */ -struct spi_nor_erase_command { - struct list_head list; - u32 count; - u32 size; - u8 opcode; -}; - -/** - * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region - * @offset: the offset in the data array of erase region start. - * LSB bits are used as a bitmask encoding flags to - * determine if this region is overlaid, if this region is - * the last in the SPI NOR flash memory and to indicate - * all the supported erase commands inside this region. - * The erase types are sorted in ascending order with the - * smallest Erase Type size being at BIT(0). - * @size: the size of the region in bytes. - */ -struct spi_nor_erase_region { - u64 offset; - u64 size; -}; - -#define SNOR_ERASE_TYPE_MAX 4 -#define SNOR_ERASE_TYPE_MASK GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0) - -#define SNOR_LAST_REGION BIT(4) -#define SNOR_OVERLAID_REGION BIT(5) - -#define SNOR_ERASE_FLAGS_MAX 6 -#define SNOR_ERASE_FLAGS_MASK GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0) - -/** - * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map - * @regions: array of erase regions. The regions are consecutive in - * address space. Walking through the regions is done - * incrementally. - * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform - * sector size (legacy implementation). - * @erase_type: an array of erase types shared by all the regions. - * The erase types are sorted in ascending order, with the - * smallest Erase Type size being the first member in the - * erase_type array. - * @uniform_erase_type: bitmask encoding erase types that can erase the - * entire memory. This member is completed at init by - * uniform and non-uniform SPI NOR flash memories if they - * support at least one erase type that can erase the - * entire memory. - */ -struct spi_nor_erase_map { - struct spi_nor_erase_region *regions; - struct spi_nor_erase_region uniform_region; - struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX]; - u8 uniform_erase_type; -}; - /** * struct spi_nor_hwcaps - Structure for describing the hardware capabilies * supported by the SPI controller (bus master). @@ -345,7 +220,7 @@ struct spi_nor_hwcaps { * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly * (Slow) Read. */ -#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0) +#define SNOR_HWCAPS_READ_MASK GENMASK(15, 0) #define SNOR_HWCAPS_READ BIT(0) #define SNOR_HWCAPS_READ_FAST BIT(1) #define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2) @@ -362,11 +237,12 @@ struct spi_nor_hwcaps { #define SNOR_HWCAPS_READ_4_4_4 BIT(9) #define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10) -#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11) +#define SNOR_HWCAPS_READ_OCTAL GENMASK(15, 11) #define SNOR_HWCAPS_READ_1_1_8 BIT(11) #define SNOR_HWCAPS_READ_1_8_8 BIT(12) #define SNOR_HWCAPS_READ_8_8_8 BIT(13) #define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14) +#define SNOR_HWCAPS_READ_8_8_8_DTR BIT(15) /* * Page Program capabilities. @@ -377,18 +253,19 @@ struct spi_nor_hwcaps { * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory * implements such commands. */ -#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16) -#define SNOR_HWCAPS_PP BIT(16) +#define SNOR_HWCAPS_PP_MASK GENMASK(23, 16) +#define SNOR_HWCAPS_PP BIT(16) -#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) -#define SNOR_HWCAPS_PP_1_1_4 BIT(17) -#define SNOR_HWCAPS_PP_1_4_4 BIT(18) -#define SNOR_HWCAPS_PP_4_4_4 BIT(19) +#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) +#define SNOR_HWCAPS_PP_1_1_4 BIT(17) +#define SNOR_HWCAPS_PP_1_4_4 BIT(18) +#define SNOR_HWCAPS_PP_4_4_4 BIT(19) -#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20) -#define SNOR_HWCAPS_PP_1_1_8 BIT(20) -#define SNOR_HWCAPS_PP_1_8_8 BIT(21) -#define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_PP_OCTAL GENMASK(23, 20) +#define SNOR_HWCAPS_PP_1_1_8 BIT(20) +#define SNOR_HWCAPS_PP_1_8_8 BIT(21) +#define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_PP_8_8_8_DTR BIT(23) #define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \ SNOR_HWCAPS_READ_4_4_4 | \ @@ -396,69 +273,19 @@ struct spi_nor_hwcaps { SNOR_HWCAPS_PP_4_4_4 | \ SNOR_HWCAPS_PP_8_8_8) +#define SNOR_HWCAPS_X_X_X_DTR (SNOR_HWCAPS_READ_8_8_8_DTR | \ + SNOR_HWCAPS_PP_8_8_8_DTR) + #define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \ SNOR_HWCAPS_READ_1_2_2_DTR | \ SNOR_HWCAPS_READ_1_4_4_DTR | \ - SNOR_HWCAPS_READ_1_8_8_DTR) + SNOR_HWCAPS_READ_1_8_8_DTR | \ + SNOR_HWCAPS_READ_8_8_8_DTR) #define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \ SNOR_HWCAPS_PP_MASK) -struct spi_nor_read_command { - u8 num_mode_clocks; - u8 num_wait_states; - u8 opcode; - enum spi_nor_protocol proto; -}; - -struct spi_nor_pp_command { - u8 opcode; - enum spi_nor_protocol proto; -}; - -enum spi_nor_read_command_index { - SNOR_CMD_READ, - SNOR_CMD_READ_FAST, - SNOR_CMD_READ_1_1_1_DTR, - - /* Dual SPI */ - SNOR_CMD_READ_1_1_2, - SNOR_CMD_READ_1_2_2, - SNOR_CMD_READ_2_2_2, - SNOR_CMD_READ_1_2_2_DTR, - - /* Quad SPI */ - SNOR_CMD_READ_1_1_4, - SNOR_CMD_READ_1_4_4, - SNOR_CMD_READ_4_4_4, - SNOR_CMD_READ_1_4_4_DTR, - - /* Octal SPI */ - SNOR_CMD_READ_1_1_8, - SNOR_CMD_READ_1_8_8, - SNOR_CMD_READ_8_8_8, - SNOR_CMD_READ_1_8_8_DTR, - - SNOR_CMD_READ_MAX -}; - -enum spi_nor_pp_command_index { - SNOR_CMD_PP, - - /* Quad SPI */ - SNOR_CMD_PP_1_1_4, - SNOR_CMD_PP_1_4_4, - SNOR_CMD_PP_4_4_4, - - /* Octal SPI */ - SNOR_CMD_PP_1_1_8, - SNOR_CMD_PP_1_8_8, - SNOR_CMD_PP_8_8_8, - - SNOR_CMD_PP_MAX -}; - -/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */ +/* Forward declaration that is used in 'struct spi_nor_controller_ops' */ struct spi_nor; /** @@ -473,7 +300,7 @@ struct spi_nor; * @read: read data from the SPI NOR. * @write: write data to the SPI NOR. * @erase: erase a sector of the SPI NOR at the offset @offs; if - * not provided by the driver, spi-nor will send the erase + * not provided by the driver, SPI NOR will send the erase * opcode via write_reg(). */ struct spi_nor_controller_ops { @@ -490,95 +317,60 @@ struct spi_nor_controller_ops { }; /** - * struct spi_nor_locking_ops - SPI NOR locking methods - * @lock: lock a region of the SPI NOR. - * @unlock: unlock a region of the SPI NOR. - * @is_locked: check if a region of the SPI NOR is completely locked + * enum spi_nor_cmd_ext - describes the command opcode extension in DTR mode + * @SPI_NOR_EXT_NONE: no extension. This is the default, and is used in Legacy + * SPI mode + * @SPI_NOR_EXT_REPEAT: the extension is same as the opcode + * @SPI_NOR_EXT_INVERT: the extension is the bitwise inverse of the opcode + * @SPI_NOR_EXT_HEX: the extension is any hex value. The command and opcode + * combine to form a 16-bit opcode. */ -struct spi_nor_locking_ops { - int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); - int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); - int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); -}; - -/** - * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings. - * Includes legacy flash parameters and settings that can be overwritten - * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216 - * Serial Flash Discoverable Parameters (SFDP) tables. - * - * @size: the flash memory density in bytes. - * @page_size: the page size of the SPI NOR flash memory. - * @hwcaps: describes the read and page program hardware - * capabilities. - * @reads: read capabilities ordered by priority: the higher index - * in the array, the higher priority. - * @page_programs: page program capabilities ordered by priority: the - * higher index in the array, the higher priority. - * @erase_map: the erase map parsed from the SFDP Sector Map Parameter - * Table. - * @quad_enable: enables SPI NOR quad mode. - * @set_4byte: puts the SPI NOR in 4 byte addressing mode. - * @convert_addr: converts an absolute address into something the flash - * will understand. Particularly useful when pagesize is - * not a power-of-2. - * @setup: configures the SPI NOR memory. Useful for SPI NOR - * flashes that have peculiarities to the SPI NOR standard - * e.g. different opcodes, specific address calculation, - * page size, etc. - * @locking_ops: SPI NOR locking methods. - */ -struct spi_nor_flash_parameter { - u64 size; - u32 page_size; - - struct spi_nor_hwcaps hwcaps; - struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; - struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; - - struct spi_nor_erase_map erase_map; - - int (*quad_enable)(struct spi_nor *nor); - int (*set_4byte)(struct spi_nor *nor, bool enable); - u32 (*convert_addr)(struct spi_nor *nor, u32 addr); - int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps); - - const struct spi_nor_locking_ops *locking_ops; +enum spi_nor_cmd_ext { + SPI_NOR_EXT_NONE = 0, + SPI_NOR_EXT_REPEAT, + SPI_NOR_EXT_INVERT, + SPI_NOR_EXT_HEX, }; -/** - * struct flash_info - Forward declaration of a structure used internally by - * spi_nor_scan() +/* + * Forward declarations that are used internally by the core and manufacturer + * drivers. */ struct flash_info; +struct spi_nor_manufacturer; +struct spi_nor_flash_parameter; /** - * struct spi_nor - Structure for defining a the SPI NOR layer - * @mtd: point to a mtd_info structure + * struct spi_nor - Structure for defining the SPI NOR layer + * @mtd: an mtd_info structure * @lock: the lock for the read/write/erase/lock/unlock operations - * @dev: point to a spi device, or a spi nor controller device. - * @spimem: point to the spi mem device + * @dev: pointer to an SPI device or an SPI NOR controller device + * @spimem: pointer to the SPI memory device * @bouncebuf: bounce buffer used when the buffer passed by the MTD * layer is not DMA-able * @bouncebuf_size: size of the bounce buffer - * @info: spi-nor part JDEC MFR id and other info - * @page_size: the page size of the SPI NOR - * @addr_width: number of address bytes + * @info: SPI NOR part JEDEC MFR ID and other info + * @manufacturer: SPI NOR manufacturer + * @addr_nbytes: number of address bytes * @erase_opcode: the opcode for erasing a sector * @read_opcode: the read opcode * @read_dummy: the dummy needed by the read operation * @program_opcode: the program opcode * @sst_write_second: used by the SST write operation - * @flags: flag options for the current SPI-NOR (SNOR_F_*) + * @flags: flag options for the current SPI NOR (SNOR_F_*) + * @cmd_ext_type: the command opcode extension type for DTR mode. * @read_proto: the SPI protocol for read operations * @write_proto: the SPI protocol for write operations - * @reg_proto the SPI protocol for read_reg/write_reg/erase operations + * @reg_proto: the SPI protocol for read_reg/write_reg/erase operations + * @sfdp: the SFDP data of the flash + * @debugfs_root: pointer to the debugfs directory * @controller_ops: SPI NOR controller driver specific operations. - * @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings. + * @params: [FLASH-SPECIFIC] SPI NOR flash parameters and settings. * The structure includes legacy flash parameters and * settings that can be overwritten by the spi_nor_fixups * hooks, or dynamically when parsing the SFDP tables. - * @priv: the private data + * @dirmap: pointers to struct spi_mem_dirmap_desc for reads/writes. + * @priv: pointer to the private data */ struct spi_nor { struct mtd_info mtd; @@ -588,8 +380,8 @@ struct spi_nor { u8 *bouncebuf; size_t bouncebuf_size; const struct flash_info *info; - u32 page_size; - u8 addr_width; + const struct spi_nor_manufacturer *manufacturer; + u8 addr_nbytes; u8 erase_opcode; u8 read_opcode; u8 read_dummy; @@ -599,43 +391,22 @@ struct spi_nor { enum spi_nor_protocol reg_proto; bool sst_write_second; u32 flags; + enum spi_nor_cmd_ext cmd_ext_type; + struct sfdp *sfdp; + struct dentry *debugfs_root; const struct spi_nor_controller_ops *controller_ops; - struct spi_nor_flash_parameter params; + struct spi_nor_flash_parameter *params; + + struct { + struct spi_mem_dirmap_desc *rdesc; + struct spi_mem_dirmap_desc *wdesc; + } dirmap; void *priv; }; -static u64 __maybe_unused -spi_nor_region_is_last(const struct spi_nor_erase_region *region) -{ - return region->offset & SNOR_LAST_REGION; -} - -static u64 __maybe_unused -spi_nor_region_end(const struct spi_nor_erase_region *region) -{ - return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size; -} - -static void __maybe_unused -spi_nor_region_mark_end(struct spi_nor_erase_region *region) -{ - region->offset |= SNOR_LAST_REGION; -} - -static void __maybe_unused -spi_nor_region_mark_overlay(struct spi_nor_erase_region *region) -{ - region->offset |= SNOR_OVERLAID_REGION; -} - -static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor) -{ - return !!nor->params.erase_map.uniform_erase_type; -} - static inline void spi_nor_set_flash_node(struct spi_nor *nor, struct device_node *np) { @@ -653,7 +424,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) * @name: the chip type name * @hwcaps: the hardware capabilities supported by the controller driver * - * The drivers can use this fuction to scan the SPI NOR. + * The drivers can use this function to scan the SPI NOR. * In the scanning, it will try to get all the necessary information to * fill the mtd_info{} and the spi_nor{}. * |